ramips: rt305x: add support for the UR-336UN board

Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451

11 files changed, 139 insertions, 0 deletions

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index bb70fe7..43fda2f 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -102,6 +102,9 @@ get_status_led() {
 	wr512-3gn)
 		status_led="wr512:green:wps"
 		;;
+	ur-336un)
+		status_led="ur336:green:wps"
+		;;
 	xdxrn502j)
 		status_led="xdxrn502j:green:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 81c12de..c987a25 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -32,6 +32,10 @@ ramips_setup_interfaces()
 
 	f5d8235-v1 | \
 	f5d8235-v2 | \
+	ur-336un)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+
 	v11st-fe)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
@@ -110,6 +114,11 @@ ramips_setup_macs()
 		;;
 
 	esr-9753 | \
+	ur-336un)
+		lan_mac=$(ramips_get_mac_binary devdata 16388)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
 	nbg-419n | \
 	wcr-150gn)
                 lan_mac=$(ramips_get_mac_binary factory 4)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c20b80c..486d137 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -152,6 +152,9 @@ ramips_board_name() {
 	*"WR512-3GN-like router")
 		name="wr512-3gn"
 		;;
+	*"UR-336UN Wireless N router")
+		name="ur-336un"
+		;;
 	*"AWB WR6202")
 		name="wr6202"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index faa82ec..09683f3 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -40,6 +40,7 @@ platform_check_image() {
 	wl-330n | \
 	wli-tx4-ag300n | \
 	whr-g300n |\
+	ur-336un |\
 	wr512-3gn)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index b2d9df9..8498680 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -55,6 +55,7 @@ enum ramips_mach_type {
 	RAMIPS_MACH_WR512_3GN,		/* SH-WR512NU/WS-WR512N1-like 3GN*/
 	RAMIPS_MACH_WR6202,		/* Accton WR6202 */
 	RAMIPS_MACH_XDXRN502J,          /* unknown XDX-RN502J */
+	RAMIPS_MACH_UR_336UN,		/* UPVEL ROUTER */
 
 	/* RT3662 based machines */
 	RAMIPS_MACH_RT_N56U,		/* Asus RT-N56U */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index d8370ce..f2a7d84 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -84,6 +84,11 @@ config RT305X_MACH_WR512_3GN
 	select RALINK_DEV_GPIO_BUTTONS
 	select RALINK_DEV_GPIO_LEDS
 
+config RT305X_MACH_UR_336UN
+	bool "UR-336UN Wireless N router"
+	select RALINK_DEV_GPIO_BUTTONS
+	select RALINK_DEV_GPIO_LEDS
+
 config RT305X_MACH_NW718
 	bool "Netcore NW718"
 	select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 66940cf..9cbd04d 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RT305X_MACH_W502U)		+= mach-w502u.o
 obj-$(CONFIG_RT305X_MACH_WCR150GN)	+= mach-wcr150gn.o
 obj-$(CONFIG_RT305X_MACH_WHR_G300N)	+= mach-whr-g300n.o
 obj-$(CONFIG_RT305X_MACH_WR512_3GN)	+= mach-wr512-3gn.o
+obj-$(CONFIG_RT305X_MACH_UR_336UN)	+= mach-ur-336un.o
 obj-$(CONFIG_RT305X_MACH_WL_330N)	+= mach-wl-330n.o
 obj-$(CONFIG_RT305X_MACH_WL_330N3G)	+= mach-wl-330n3g.o
 obj-$(CONFIG_RT305X_MACH_WL341V3)	+= mach-wl341v3.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c
new file mode 100644
index 0000000..0ff2649
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c
@@ -0,0 +1,92 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+
+#define UR_336UN_GPIO_LED_3G		9
+#define UR_336UN_GPIO_LED_GATEWAY	11
+#define UR_336UN_GPIO_LED_AP		12
+#define UR_336UN_GPIO_LED_STATION	13
+#define UR_336UN_GPIO_LED_WPS		14
+
+#define UR_336UN_GPIO_BUTTON_RESET	10
+#define UR_336UN_GPIO_BUTTON_CONNECT	7
+#define UR_336UN_GPIO_BUTTON_WPS	0
+#define UR_336UN_GPIO_BUTTON_WPS2	8
+
+#define UR_336UN_KEYS_POLL_INTERVAL	20
+#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL)
+
+static struct gpio_led UR_336UN_leds_gpio[] __initdata = {
+	{
+		.name		= "ur336:green:3g",
+		.gpio		= UR_336UN_GPIO_LED_3G,
+		.active_low	= 1,
+	}, {
+		.name		= "ur336:green:gateway",
+		.gpio		= UR_336UN_GPIO_LED_GATEWAY,
+		.active_low	= 1,
+	}, {
+		.name		= "ur336:green:ap",
+		.gpio		= UR_336UN_GPIO_LED_AP,
+		.active_low	= 1,
+	}, {
+		.name		= "ur336:green:wps",
+		.gpio		= UR_336UN_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "ur336:green:station",
+		.gpio		= UR_336UN_GPIO_LED_STATION,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset_wps",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= UR_336UN_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "mode",
+		.type		= EV_KEY,
+		.code		= KEY_M,
+		.debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= UR_336UN_GPIO_BUTTON_CONNECT,
+		.active_low	= 1,
+	}
+};
+
+#define UR_336UN_GPIO_MODE \
+	((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
+	 RT305X_GPIO_MODE_MDIO)
+
+static void __init UR_336UN_init(void)
+{
+	rt305x_gpio_init(UR_336UN_GPIO_MODE);
+
+	rt305x_register_flash(0);
+
+	rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+	rt305x_register_ethernet();
+	ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio),
+				  UR_336UN_leds_gpio);
+	ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL,
+				     ARRAY_SIZE(UR_336UN_gpio_buttons),
+				     UR_336UN_gpio_buttons);
+	rt305x_register_wifi();
+	rt305x_register_wdt();
+	rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router",
+	      UR_336UN_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index d3ddb72..92a8054 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -412,6 +412,11 @@ define Image/Build/Profile/WR5123GN
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
 endef
 
+
+define Image/Build/Profile/UPVEL
+	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,ur-336un,UR-336UN,ttyS1,57600,phys)
+endef
+
 define Image/Build/Profile/WR6202
 	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
 endef
diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3
index bea6349..0b47fca 100644
--- a/target/linux/ramips/rt305x/config-3.3
+++ b/target/linux/ramips/rt305x/config-3.3
@@ -113,6 +113,7 @@ CONFIG_RT305X_MACH_PWH2004=y
 CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_RT_N10_PLUS=y
 CONFIG_RT305X_MACH_SL_R7205=y
+CONFIG_RT305X_MACH_UR_336UN=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_W306R_V20=y
 CONFIG_RT305X_MACH_W502U=y
diff --git a/target/linux/ramips/rt305x/profiles/upvel.mk b/target/linux/ramips/rt305x/profiles/upvel.mk
new file mode 100644
index 0000000..fa1c993
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/upvel.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/UPVEL
+	NAME:=UPVEL UR-336UN
+	PACKAGES:=\
+		kmod-usb-core kmod-usb-rt305x-dwc_otg \
+		kmod-ledtrig-usbdev
+endef
+
+define Profile/UPVEL/Description
+	Default package set compatible with URVEL router board.
+endef
+$(eval $(call Profile,UPVEL))