ipq806x: Sort occurrences of boardame alphabetically

This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>

6 files changed, 169 insertions, 170 deletions

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index f0b087f..b04832f 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,11 +11,10 @@ board=$(board_name)
 boardname="${board##*,}"
 
 case "$board" in
-tplink,c2600)
-	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
-	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
-	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
 	;;
 netgear,d7800 |\
 netgear,r7500 |\
@@ -26,15 +25,11 @@ netgear,r7800)
 	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0"
 	ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
 	;;
-avm,fritzbox-4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
-	;;
-zyxel,nbg6817)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
-	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+tplink,c2600)
+	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
+	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
 	;;
 tplink,vr2600v)
 	ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
@@ -43,6 +38,11 @@ tplink,vr2600v)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
 	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
 	;;
+zyxel,nbg6817)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
+	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+	;;
 *)
 	;;
 esac
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 8854b9c..74a38ee 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,6 +12,18 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+avm,fritzbox-4040)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "switch0" \
+		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+	;;
+linksys,ea8500)
+	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+	ucidef_add_switch "switch0" \
+		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+	;;
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
@@ -21,27 +33,14 @@ tplink,vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
 	;;
-tplink,c2600)
-	ucidef_add_switch "switch0" \
-		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
-	;;
 qcom,ipq8064-db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
 	;;
-linksys,ea8500)
-
-	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-	ucidef_add_switch "switch0" \
-		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-	;;
-avm,fritzbox-4040)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+tplink,c2600)
 	ucidef_add_switch "switch0" \
-		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
 	;;
 zyxel,nbg6817)
 	hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index dc74df8..4aaa923 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,69 +47,69 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
-	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 4096 12064
-		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
+	qcom,ap-dk01.1-c1)
+		ath10kcal_extract "ART" 4096 12064
+		;;
 	esac
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
-	qcom,ap-dk01.1-c1)
-		ath10kcal_extract "ART" 20480 12064
-		;;
 	avm,fritzbox-4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
+	qcom,ap-dk01.1-c1)
+		ath10kcal_extract "ART" 20480 12064
+		;;
 	esac
 	;;
 
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
 	case $board in
-	tplink,c2600)
-		ath10kcal_extract "radio" 4096 12064
-# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
+	linksys,ea8500)
+		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath10kcal_extract "art" 4096 12064
 		;;
 	netgear,d7800 |\
 	netgear,r7500v2 |\
 	netgear,r7800)
 		ath10kcal_extract "art" 4096 12064
 		;;
-	linksys,ea8500)
-		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ath10kcal_extract "art" 4096 12064
-		;;
-	zyxel,nbg6817)
-		ath10kcal_extract "0:ART" 4096 12064
+	tplink,c2600)
+		ath10kcal_extract "radio" 4096 12064
+# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
 		;;
 	tplink,vr2600v)
 		ath10kcal_extract "ART" 4096 12064
 		;;
+	zyxel,nbg6817)
+		ath10kcal_extract "0:ART" 4096 12064
+		;;
 	esac
 	;;
 "ath10k/pre-cal-pci-0001:01:00.0.bin")
 	case $board in
-	tplink,c2600)
-		ath10kcal_extract "radio" 20480 12064
-# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
+	linksys,ea8500)
+		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath10kcal_extract "art" 20480 12064
 		;;
 	netgear,d7800 |\
 	netgear,r7500v2 |\
 	netgear,r7800)
 		ath10kcal_extract "art" 20480 12064
 		;;
-	linksys,ea8500)
-		hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ath10kcal_extract "art" 20480 12064
-		;;
-	zyxel,nbg6817)
-		ath10kcal_extract "0:ART" 20480 12064
+	tplink,c2600)
+		ath10kcal_extract "radio" 20480 12064
+# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
 		;;
 	tplink,vr2600v)
 		ath10kcal_extract "ART" 20480 12064
 		;;
+	zyxel,nbg6817)
+		ath10kcal_extract "0:ART" 20480 12064
+		;;
 	esac
 	;;
 *)
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 2077110..7e31c38 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -12,23 +12,23 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
-	tplink,c2600)
-		echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+	linksys,ea8500)
+		echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
 		;;
 	netgear,d7800 |\
 	netgear,r7500v2 |\
 	netgear,r7800)
 		echo $(macaddr_add $(mtd_get_mac_binary art 6)  $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
 		;;
-	linksys,ea8500)
-		echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
-		;;
-	zyxel,nbg6817)
-		echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+	tplink,c2600)
+		echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
 		;;
 	tplink,vr2600v)
 		echo $(macaddr_add $(mtd_get_mac_binary default-mac 0)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
 		;;
+	zyxel,nbg6817)
+		echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+		;;
 	*)
 		;;
 esac
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index dc88c9e..f71ee37 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,9 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	linksys,ea8500)
+		platform_do_upgrade_linksys "$ARGV"
+		;;
 	netgear,d7800 |\
 	netgear,r7500 |\
 	netgear,r7500v2 |\
@@ -24,9 +27,6 @@ platform_do_upgrade() {
 		MTD_CONFIG_ARGS="-s 0x200000"
 		default_do_upgrade "$ARGV"
 		;;
-	linksys,ea8500)
-		platform_do_upgrade_linksys "$ARGV"
-		;;
 	tplink,vr2600v)
 		PART_NAME="kernel:rootfs"
 		MTD_CONFIG_ARGS="-s 0x200000"
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index f28f4a3..e8182e8 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -98,70 +98,20 @@ define Device/ZyXELImage
 	IMAGE/mmcblk0p4-kernel.bin := append-kernel
 endef
 
-define Device/qcom_ipq8064-ap148
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_DTS := qcom-ipq8064-ap148
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap148
-	SUPPORTED_DEVICES += ap148
-	DEVICE_TITLE := Qualcomm AP148
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
-	$(call Device/LegacyImage)
-	$(call Device/UbiFit)
-	DEVICE_DTS := qcom-ipq8064-ap148
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap148
-	SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
-	DEVICE_TITLE := Qualcomm AP148 (legacy)
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/tplink_c2600
-	$(call Device/TpSafeImage)
-	DEVICE_DTS := qcom-ipq8064-c2600
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := c2600
-	SUPPORTED_DEVICES += c2600
-	TPLINK_BOARD_ID := C2600
-	DEVICE_TITLE := TP-Link Archer C2600
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/netgear_d7800
-	$(call Device/DniImage)
-	DEVICE_DTS := qcom-ipq8064-d7800
-	KERNEL_SIZE := 2097152
-	NETGEAR_BOARD_ID := D7800
-	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := d7800
-	SUPPORTED_DEVICES += d7800
-	DEVICE_TITLE := Netgear Nighthawk X4 D7800
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/qcom_ipq8064-db149
-	$(call Device/FitImage)
-	DEVICE_DTS := qcom-ipq8064-db149
-	KERNEL_INSTALL := 1
-	BOARD_NAME := db149
-	DEVICE_TITLE := Qualcomm DB149
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/avm_fritzbox-4040
+	$(call Device/FitImageLzma)
+	DEVICE_DTS := qcom-ipq4019-fritz4040
+	KERNEL_LOADADDR := 0x80208000
+	BLOCKSIZE := 4k
+	PAGESIZE := 256
+	BOARD_NAME := fritz4040
+	DEVICE_TITLE := AVM Fritz!Box 4040
+	IMAGE_SIZE := 29753344
+	IMAGES = sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
 endef
-TARGET_DEVICES += qcom_ipq8064-db149
+TARGET_DEVICES += avm_fritzbox-4040
 
 define Device/linksys_ea8500
 	$(call Device/LegacyImage)
@@ -182,20 +132,20 @@ define Device/linksys_ea8500
 endef
 TARGET_DEVICES += linksys_ea8500
 
-define Device/avm_fritzbox-4040
-	$(call Device/FitImageLzma)
-	DEVICE_DTS := qcom-ipq4019-fritz4040
-	KERNEL_LOADADDR := 0x80208000
-	BLOCKSIZE := 4k
-	PAGESIZE := 256
-	BOARD_NAME := fritz4040
-	DEVICE_TITLE := AVM Fritz!Box 4040
-	IMAGE_SIZE := 29753344
-	IMAGES = sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
+define Device/netgear_d7800
+	$(call Device/DniImage)
+	DEVICE_DTS := qcom-ipq8064-d7800
+	KERNEL_SIZE := 2097152
+	NETGEAR_BOARD_ID := D7800
+	NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := d7800
+	SUPPORTED_DEVICES += d7800
+	DEVICE_TITLE := Netgear Nighthawk X4 D7800
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
 endef
-TARGET_DEVICES += avm_fritzbox-4040
+TARGET_DEVICES += netgear_d7800
 
 define Device/netgear_r7500
 	$(call Device/DniImage)
@@ -242,37 +192,6 @@ define Device/netgear_r7800
 endef
 TARGET_DEVICES += netgear_r7800
 
-define Device/zyxel_nbg6817
-	DEVICE_DTS := qcom-ipq8065-nbg6817
-	KERNEL_SIZE := 4096k
-	BLOCKSIZE := 64k
-	BOARD_NAME := nbg6817
-	SUPPORTED_DEVICES += nbg6817
-	DEVICE_TITLE := ZyXEL NBG6817
-	DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
-	$(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
-
-define Device/tplink_vr2600v
-	PROFILES += $$(DEVICE_NAME)
-	FILESYSTEMS := squashfs
-	KERNEL_SUFFIX := -uImage
-	KERNEL = kernel-bin | append-dtb | uImage none
-	KERNEL_NAME := zImage
-	KERNEL_SIZE := 2097152
-	DEVICE_DTS := qcom-ipq8064-vr2600v
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := vr2600v
-	SUPPORTED_DEVICES += vr2600v
-	DEVICE_TITLE := TP-Link Archer VR2600v
-	DEVICE_PACKAGES := ath10k-firmware-qca99x0
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
 define Device/qcom_ap-dk01.1-c1
 	PROFILES += $$(DEVICE_NAME)
 	DEVICE_TITLE := QCA AP-DK01.1-C1
@@ -304,4 +223,85 @@ define Device/qcom_ap-dk04.1-c1
 endef
 TARGET_DEVICES += qcom_ap-dk04.1-c1
 
+define Device/qcom_ipq8064-ap148
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_DTS := qcom-ipq8064-ap148
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap148
+	SUPPORTED_DEVICES += ap148
+	DEVICE_TITLE := Qualcomm AP148
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+	$(call Device/LegacyImage)
+	$(call Device/UbiFit)
+	DEVICE_DTS := qcom-ipq8064-ap148
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap148
+	SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+	DEVICE_TITLE := Qualcomm AP148 (legacy)
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
+
+define Device/qcom_ipq8064-db149
+	$(call Device/FitImage)
+	DEVICE_DTS := qcom-ipq8064-db149
+	KERNEL_INSTALL := 1
+	BOARD_NAME := db149
+	DEVICE_TITLE := Qualcomm DB149
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_c2600
+	$(call Device/TpSafeImage)
+	DEVICE_DTS := qcom-ipq8064-c2600
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := c2600
+	SUPPORTED_DEVICES += c2600
+	TPLINK_BOARD_ID := C2600
+	DEVICE_TITLE := TP-Link Archer C2600
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+	PROFILES += $$(DEVICE_NAME)
+	FILESYSTEMS := squashfs
+	KERNEL_SUFFIX := -uImage
+	KERNEL = kernel-bin | append-dtb | uImage none
+	KERNEL_NAME := zImage
+	KERNEL_SIZE := 2097152
+	DEVICE_DTS := qcom-ipq8064-vr2600v
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := vr2600v
+	SUPPORTED_DEVICES += vr2600v
+	DEVICE_TITLE := TP-Link Archer VR2600v
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/zyxel_nbg6817
+	DEVICE_DTS := qcom-ipq8065-nbg6817
+	KERNEL_SIZE := 4096k
+	BLOCKSIZE := 64k
+	BOARD_NAME := nbg6817
+	SUPPORTED_DEVICES += nbg6817
+	DEVICE_TITLE := ZyXEL NBG6817
+	DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
+	$(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
+
 $(eval $(call BuildImage))