summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2009-07-19 16:42:37 +0000
committerLars-Peter Clausen <lars@metafoo.de>2009-07-19 16:42:37 +0000
commitfd879ddbe88a372b533aaf964e3af8c355308e9c (patch)
tree39ee6bcda6ca60363aea4a1431f5940933c8b97a /target
parent80b3c0875ac67d61815db65b2a7850dbb67625db (diff)
downloadmtk-20170518-fd879ddbe88a372b533aaf964e3af8c355308e9c.zip
mtk-20170518-fd879ddbe88a372b533aaf964e3af8c355308e9c.tar.gz
mtk-20170518-fd879ddbe88a372b533aaf964e3af8c355308e9c.tar.bz2
glamo mmc regulator fixes.
SVN-Revision: 16922
Diffstat (limited to 'target')
-rw-r--r--target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig2
-rw-r--r--target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c30
2 files changed, 22 insertions, 10 deletions
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
index 2ae335a..8de1c2f 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
@@ -43,7 +43,7 @@ config MFD_GLAMO_SPI_GPIO
config MFD_GLAMO_MCI
tristate "Glamo S3C SD/MMC Card Interface support"
- depends on MFD_GLAMO && MMC
+ depends on MFD_GLAMO && MMC && REGULATOR
help
This selects a driver for the MCI interface found in
the S-Media GLAMO chip, as used in Openmoko
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
index e66a14b..ef39017 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
@@ -618,6 +618,7 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
struct glamo_mci_host *host = mmc_priv(mmc);
int bus_width = 0;
int powering = 0;
+ int ret;
if (host->suspending) {
dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
@@ -628,8 +629,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* Set power */
switch(ios->power_mode) {
case MMC_POWER_UP:
- mmc_regulator_set_ocr(host->regulator, ios->vdd);
- host->vdd_current = ios->vdd;
+ ret = regulator_enable(host->regulator);
+ if (ret)
+ dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
break;
case MMC_POWER_ON:
/*
@@ -638,10 +640,6 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
*/
host->force_slow_during_powerup = 1;
- if (host->vdd_current != ios->vdd) {
- mmc_regulator_set_ocr(host->regulator, ios->vdd);
- host->vdd_current = ios->vdd;
- }
if (host->power_mode_current == MMC_POWER_OFF) {
glamo_engine_enable(host->pdata->core,
GLAMO_ENGINE_MMC);
@@ -659,12 +657,20 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
glamo_engine_disable(host->pdata->core,
GLAMO_ENGINE_MMC);
- mmc_regulator_set_ocr(host->regulator, 0);
- host->vdd_current = -1;
+ ret = regulator_disable(host->regulator);
+ if (ret)
+ dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret);
break;
}
host->power_mode_current = ios->power_mode;
+ if (host->vdd_current != ios->vdd) {
+ ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
+ if (ret)
+ dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret);
+ else
+ host->vdd_current = ios->vdd;
+ }
glamo_mci_set_card_clock(host, ios->clock);
/* after power-up, we are meant to give it >= 74 clocks so it can
@@ -804,7 +810,7 @@ static int glamo_mci_probe(struct platform_device *pdev)
}
- host->vdd_current = -1;
+ host->vdd_current = 0;
host->clk_rate = 50000000; /* really it's 49152000 */
host->clk_div = 16;
@@ -824,6 +830,12 @@ static int glamo_mci_probe(struct platform_device *pdev)
mmc->max_phys_segs = 128;
mmc->max_hw_segs = 128;
+ if (mmc->ocr_avail < 0) {
+ dev_warn(&pdev->dev, "Failed to get ocr list for regulator: %d.\n",
+ mmc->ocr_avail);
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ }
+
platform_set_drvdata(pdev, mmc);
glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC);