lantiq: add v3.10 patches

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031

89 files changed, 1962 insertions, 15505 deletions

diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index 4b82054..ccb30a1 100644
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -11,7 +11,7 @@ BOARDNAME:=Lantiq GPON/XWAY/SVIP
 FEATURES:=squashfs
 SUBTARGETS=xway xrx200 ase falcon
 
-LINUX_VERSION:=3.8.13
+LINUX_VERSION:=3.10.12
 
 CFLAGS=-Os -pipe -mips32r2 -mno-branch-likely
 
diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
index d629a12..dc5bbe2 100755
--- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh
+++ b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
@@ -1,4 +1,4 @@
-PART_NAME=linux
+PART_NAME=firmware
 
 platform_check_image() {
 	[ "$ARGC" -gt 1 ] && return 1
diff --git a/target/linux/lantiq/config-3.9 b/target/linux/lantiq/config-3.9
deleted file mode 100644
index 261dd0d..0000000
--- a/target/linux/lantiq/config-3.9
+++ /dev/null
@@ -1,168 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CSRC_R4K=y
-# CONFIG_DEBUG_PINCTRL is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_DT_EASY50712=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MM_LANTIQ=y
-CONFIG_GPIO_STP_XWAY=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LANTIQ=y
-CONFIG_LANTIQ_ETOP=y
-CONFIG_LANTIQ_PHY=y
-CONFIG_LANTIQ_WDT=y
-CONFIG_LANTIQ_XRX200=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-# CONFIG_OF_DISPLAY_TIMING is not set
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-# CONFIG_OF_VIDEOMODE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIE_LANTIQ is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LANTIQ=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_LANTIQ=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_XWAY=y
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PSB6970_PHY=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366_SMI=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_LANTIQ=y
-# CONFIG_SOC_AMAZON_SE is not set
-# CONFIG_SOC_FALCON is not set
-CONFIG_SOC_TYPE_XWAY=y
-CONFIG_SOC_XWAY=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USE_OF=y
-CONFIG_XRX200_PHY_FW=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/config-default b/target/linux/lantiq/config-default
index 0ba6de9..dbf1940 100644
--- a/target/linux/lantiq/config-default
+++ b/target/linux/lantiq/config-default
@@ -161,5 +161,4 @@ CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UIDGID_CONVERTED=y
 CONFIG_USB_ARCH_HAS_XHCI=y
 CONFIG_USE_OF=y
-CONFIG_XRX200_PHY_FW=y
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.10/0001-MIPS-lantiq-add-pcie-driver.patch
index 1f15cbe..9e0fa1b 100644
--- a/target/linux/lantiq/patches-3.8/0030-MIPS-lantiq-add-pcie-driver.patch
+++ b/target/linux/lantiq/patches-3.10/0001-MIPS-lantiq-add-pcie-driver.patch
@@ -1,29 +1,30 @@
-From 86b0b37729298b067157263b7bf5dbf735527e7c Mon Sep 17 00:00:00 2001
+From 1b5fced71edb0a4e71012d79be29f1003c7b099f Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 09:39:02 +0100
-Subject: [PATCH 30/40] MIPS: lantiq: add pcie driver
+Subject: [PATCH 01/34] MIPS: lantiq: add pcie driver
 
 ---
  arch/mips/lantiq/Kconfig           |   10 +
  arch/mips/lantiq/xway/sysctrl.c    |    2 +
  arch/mips/pci/Makefile             |    2 +
- arch/mips/pci/fixup-lantiq-pcie.c  |   82 ++
- arch/mips/pci/fixup-lantiq.c       |    3 +
+ arch/mips/pci/fixup-lantiq-pcie.c  |   82 +++
+ arch/mips/pci/fixup-lantiq.c       |    5 +-
  arch/mips/pci/ifxmips_pci_common.h |   57 ++
- arch/mips/pci/ifxmips_pcie.c       | 1607 ++++++++++++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie.h       |  135 +++
- arch/mips/pci/ifxmips_pcie_ar10.h  |  290 +++++++
- arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++
- arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++
- arch/mips/pci/ifxmips_pcie_pm.c    |  176 ++++
+ arch/mips/pci/ifxmips_pcie.c       | 1099 ++++++++++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie.h       |  135 ++++
+ arch/mips/pci/ifxmips_pcie_ar10.h  |  290 ++++++++
+ arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++++
+ arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++++
+ arch/mips/pci/ifxmips_pcie_pm.c    |  176 +++++
  arch/mips/pci/ifxmips_pcie_pm.h    |   36 +
- arch/mips/pci/ifxmips_pcie_reg.h   | 1001 ++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++
+ arch/mips/pci/ifxmips_pcie_reg.h   | 1001 +++++++++++++++++++++++++++
+ arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++++
  arch/mips/pci/pci.c                |   25 +
+ arch/mips/pci/pcie-lantiq.h        | 1305 ++++++++++++++++++++++++++++++++++++
  drivers/pci/pcie/aer/Kconfig       |    2 +-
  include/linux/pci.h                |    2 +
  include/linux/pci_ids.h            |    6 +
- 19 files changed, 4576 insertions(+), 1 deletion(-)
+ 20 files changed, 5374 insertions(+), 2 deletions(-)
  create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
  create mode 100644 arch/mips/pci/ifxmips_pci_common.h
  create mode 100644 arch/mips/pci/ifxmips_pcie.c
@@ -35,12 +36,13 @@ Subject: [PATCH 30/40] MIPS: lantiq: add pcie driver
  create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
  create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
  create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
+ create mode 100644 arch/mips/pci/pcie-lantiq.h
 
-Index: linux-3.8.13/arch/mips/lantiq/Kconfig
-===================================================================
---- linux-3.8.13.orig/arch/mips/lantiq/Kconfig	2013-07-25 20:01:18.211262427 +0200
-+++ linux-3.8.13/arch/mips/lantiq/Kconfig	2013-07-25 20:01:18.399262431 +0200
-@@ -18,6 +18,7 @@
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index c002191..1621b1d 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -17,6 +17,7 @@ config SOC_XWAY
  	bool "XWAY"
  	select SOC_TYPE_XWAY
  	select HW_HAS_PCI
@@ -48,7 +50,7 @@ Index: linux-3.8.13/arch/mips/lantiq/Kconfig
  
  config SOC_FALCON
  	bool "FALCON"
-@@ -37,6 +38,15 @@
+@@ -36,6 +37,15 @@ config PCI_LANTIQ
  	bool "PCI Support"
  	depends on SOC_XWAY && PCI
  
@@ -64,11 +66,11 @@ Index: linux-3.8.13/arch/mips/lantiq/Kconfig
  config XRX200_PHY_FW
  	bool "XRX200 PHY firmware loader"
  	depends on SOC_XWAY
-Index: linux-3.8.13/arch/mips/lantiq/xway/sysctrl.c
-===================================================================
---- linux-3.8.13.orig/arch/mips/lantiq/xway/sysctrl.c	2013-07-25 20:01:18.375262431 +0200
-+++ linux-3.8.13/arch/mips/lantiq/xway/sysctrl.c	2013-07-25 20:01:18.399262431 +0200
-@@ -377,6 +377,8 @@
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index c24924f..e30dde8 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
  				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
  				PMU_PPE_QSB | PMU_PPE_TOP);
  		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
@@ -77,11 +79,11 @@ Index: linux-3.8.13/arch/mips/lantiq/xway/sysctrl.c
  	} else if (of_machine_is_compatible("lantiq,ar9")) {
  		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
  				ltq_ar9_fpi_hz(), CLOCK_250M);
-Index: linux-3.8.13/arch/mips/pci/Makefile
-===================================================================
---- linux-3.8.13.orig/arch/mips/pci/Makefile	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/arch/mips/pci/Makefile	2013-07-25 20:01:18.399262431 +0200
-@@ -42,6 +42,8 @@
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 2cb1d31..8ba7fff 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -41,6 +41,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
  obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
@@ -90,10 +92,11 @@ Index: linux-3.8.13/arch/mips/pci/Makefile
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
  obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
  obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-Index: linux-3.8.13/arch/mips/pci/fixup-lantiq-pcie.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/fixup-lantiq-pcie.c	2013-07-25 20:01:18.403262431 +0200
+diff --git a/arch/mips/pci/fixup-lantiq-pcie.c b/arch/mips/pci/fixup-lantiq-pcie.c
+new file mode 100644
+index 0000000..3325e24
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq-pcie.c
 @@ -0,0 +1,82 @@
 +/******************************************************************************
 +**
@@ -177,10 +180,10 @@ Index: linux-3.8.13/arch/mips/pci/fixup-lantiq-pcie.c
 +
 +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
 +     ifx_pcie_rc_class_early_fixup);
-Index: linux-3.8.13/arch/mips/pci/fixup-lantiq.c
-===================================================================
---- linux-3.8.13.orig/arch/mips/pci/fixup-lantiq.c	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/arch/mips/pci/fixup-lantiq.c	2013-07-25 20:46:47.227327456 +0200
+diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
+index 6c829df..50ec0b5 100644
+--- a/arch/mips/pci/fixup-lantiq.c
++++ b/arch/mips/pci/fixup-lantiq.c
 @@ -11,11 +11,12 @@
  
  int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
@@ -195,7 +198,7 @@ Index: linux-3.8.13/arch/mips/pci/fixup-lantiq.c
  
  	if (ltq_pci_plat_dev_init)
  		return ltq_pci_plat_dev_init(dev);
-@@ -28,6 +29,8 @@
+@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  	struct of_irq dev_irq;
  	int irq;
  
@@ -204,10 +207,11 @@ Index: linux-3.8.13/arch/mips/pci/fixup-lantiq.c
  	if (of_irq_map_pci(dev, &dev_irq)) {
  		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
  			slot, pin);
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pci_common.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pci_common.h	2013-07-25 20:01:18.403262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pci_common.h b/arch/mips/pci/ifxmips_pci_common.h
+new file mode 100644
+index 0000000..46f4cb2
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pci_common.h
 @@ -0,0 +1,57 @@
 +/******************************************************************************
 +**
@@ -266,10 +270,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pci_common.h
 +
 +#endif /* IFXMIPS_PCI_COMMON_H */
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie.c	2013-07-25 20:01:18.403262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie.c b/arch/mips/pci/ifxmips_pcie.c
+new file mode 100644
+index 0000000..4128898
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.c
 @@ -0,0 +1,1099 @@
 +/*
 + *  This program is free software; you can redistribute it and/or modify it
@@ -1370,10 +1375,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie.c
 +MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
 +MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie.h	2013-07-25 20:01:18.403262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie.h b/arch/mips/pci/ifxmips_pcie.h
+new file mode 100644
+index 0000000..c6f92f5
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie.h
 @@ -0,0 +1,135 @@
 +/******************************************************************************
 +**
@@ -1510,10 +1516,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie.h
 +
 +#endif  /* IFXMIPS_PCIE_H */
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_ar10.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_ar10.h	2013-07-25 20:01:18.407262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_ar10.h b/arch/mips/pci/ifxmips_pcie_ar10.h
+new file mode 100644
+index 0000000..99ff463
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_ar10.h
 @@ -0,0 +1,290 @@
 +/****************************************************************************
 +                              Copyright (c) 2010
@@ -1805,10 +1812,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_ar10.h
 +}
 +
 +#endif /* IFXMIPS_PCIE_AR10_H */
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_msi.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_msi.c	2013-07-25 20:01:18.407262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_msi.c b/arch/mips/pci/ifxmips_pcie_msi.c
+new file mode 100644
+index 0000000..bffd6fa
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_msi.c
 @@ -0,0 +1,392 @@
 +/******************************************************************************
 +**
@@ -2202,10 +2210,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_msi.c
 +MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
 +MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_phy.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_phy.c	2013-07-25 20:01:18.407262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_phy.c b/arch/mips/pci/ifxmips_pcie_phy.c
+new file mode 100644
+index 0000000..f5b0f13
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_phy.c
 @@ -0,0 +1,478 @@
 +/******************************************************************************
 +**
@@ -2685,10 +2694,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_phy.c
 +#endif
 +}
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.c	2013-07-25 20:01:18.407262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_pm.c b/arch/mips/pci/ifxmips_pcie_pm.c
+new file mode 100644
+index 0000000..a10ecad
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.c
 @@ -0,0 +1,176 @@
 +/******************************************************************************
 +**
@@ -2866,10 +2876,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.c
 +    ifx_pmcu_unregister(&pmcuUnRegister);
 +}
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.h	2013-07-25 20:01:18.407262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_pm.h b/arch/mips/pci/ifxmips_pcie_pm.h
+new file mode 100644
+index 0000000..6ece20d
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_pm.h
 @@ -0,0 +1,36 @@
 +/******************************************************************************
 +**
@@ -2907,10 +2918,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_pm.h
 +
 +#endif /* IFXMIPS_PCIE_PM_H  */
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_reg.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_reg.h	2013-07-25 20:01:18.411262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_reg.h b/arch/mips/pci/ifxmips_pcie_reg.h
+new file mode 100644
+index 0000000..e7e4b6c
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_reg.h
 @@ -0,0 +1,1001 @@
 +/******************************************************************************
 +**
@@ -3913,10 +3925,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_reg.h
 +
 +#endif /* IFXMIPS_PCIE_REG_H */
 +
-Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_vr9.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/ifxmips_pcie_vr9.h	2013-07-25 20:01:18.411262431 +0200
+diff --git a/arch/mips/pci/ifxmips_pcie_vr9.h b/arch/mips/pci/ifxmips_pcie_vr9.h
+new file mode 100644
+index 0000000..57d9368
+--- /dev/null
++++ b/arch/mips/pci/ifxmips_pcie_vr9.h
 @@ -0,0 +1,271 @@
 +/****************************************************************************
 +                              Copyright (c) 2010
@@ -4189,11 +4202,11 @@ Index: linux-3.8.13/arch/mips/pci/ifxmips_pcie_vr9.h
 +
 +#endif /* IFXMIPS_PCIE_VR9_H */
 +
-Index: linux-3.8.13/arch/mips/pci/pci.c
-===================================================================
---- linux-3.8.13.orig/arch/mips/pci/pci.c	2013-07-25 20:01:13.135262305 +0200
-+++ linux-3.8.13/arch/mips/pci/pci.c	2013-07-25 20:01:18.411262431 +0200
-@@ -255,6 +255,31 @@
+diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
+index 594e60d..2e75400 100644
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -266,6 +266,31 @@ static int __init pcibios_init(void)
  
  subsys_initcall(pcibios_init);
  
@@ -4225,53 +4238,11 @@ Index: linux-3.8.13/arch/mips/pci/pci.c
  static int pcibios_enable_resources(struct pci_dev *dev, int mask)
  {
  	u16 cmd, old_cmd;
-Index: linux-3.8.13/drivers/pci/pcie/aer/Kconfig
-===================================================================
---- linux-3.8.13.orig/drivers/pci/pcie/aer/Kconfig	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/drivers/pci/pcie/aer/Kconfig	2013-07-25 20:01:18.411262431 +0200
-@@ -5,7 +5,7 @@
- config PCIEAER
- 	boolean "Root Port Advanced Error Reporting support"
- 	depends on PCIEPORTBUS
--	default y
-+	default n
- 	help
- 	  This enables PCI Express Root Port Advanced Error Reporting
- 	  (AER) driver support. Error reporting messages sent to Root
-Index: linux-3.8.13/include/linux/pci.h
-===================================================================
---- linux-3.8.13.orig/include/linux/pci.h	2013-07-25 20:01:13.111262305 +0200
-+++ linux-3.8.13/include/linux/pci.h	2013-07-25 20:01:18.415262432 +0200
-@@ -1059,6 +1059,8 @@
- int pci_cfg_space_size_ext(struct pci_dev *dev);
- int pci_cfg_space_size(struct pci_dev *dev);
- unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-+int pcibios_host_nr(void);
-+int pcibios_1st_host_bus_nr(void);
- void pci_setup_bridge(struct pci_bus *bus);
- resource_size_t pcibios_window_alignment(struct pci_bus *bus,
- 					 unsigned long type);
-Index: linux-3.8.13/include/linux/pci_ids.h
-===================================================================
---- linux-3.8.13.orig/include/linux/pci_ids.h	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/include/linux/pci_ids.h	2013-07-25 20:01:18.415262432 +0200
-@@ -1040,6 +1040,12 @@
- #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
- #define PCI_DEVICE_ID_SGI_IOC4		0x100a
- 
-+#define PCI_VENDOR_ID_INFINEON		0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
-+#define PCI_VENDOR_ID_LANTIQ		0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE	0x00
-+
- #define PCI_VENDOR_ID_WINBOND		0x10ad
- #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
- #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
-Index: linux-3.8.13/arch/mips/pci/pcie-lantiq.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/pci/pcie-lantiq.h	2013-07-25 20:01:18.419262432 +0200
+diff --git a/arch/mips/pci/pcie-lantiq.h b/arch/mips/pci/pcie-lantiq.h
+new file mode 100644
+index 0000000..d877c23
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.h
 @@ -0,0 +1,1305 @@
 +/******************************************************************************
 +**
@@ -5578,3 +5549,49 @@ Index: linux-3.8.13/arch/mips/pci/pcie-lantiq.h
 +
 +#endif /* IFXMIPS_PCIE_VR9_H */
 +
+diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
+index 50e94e0..4bf848f 100644
+--- a/drivers/pci/pcie/aer/Kconfig
++++ b/drivers/pci/pcie/aer/Kconfig
+@@ -5,7 +5,7 @@
+ config PCIEAER
+ 	boolean "Root Port Advanced Error Reporting support"
+ 	depends on PCIEPORTBUS
+-	default y
++	default n
+ 	help
+ 	  This enables PCI Express Root Port Advanced Error Reporting
+ 	  (AER) driver support. Error reporting messages sent to Root
+diff --git a/include/linux/pci.h b/include/linux/pci.h
+index 3a24e4f..25b0349 100644
+--- a/include/linux/pci.h
++++ b/include/linux/pci.h
+@@ -1082,6 +1082,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ int pci_cfg_space_size_ext(struct pci_dev *dev);
+ int pci_cfg_space_size(struct pci_dev *dev);
+ unsigned char pci_bus_max_busnr(struct pci_bus *bus);
++int pcibios_host_nr(void);
++int pcibios_1st_host_bus_nr(void);
+ void pci_setup_bridge(struct pci_bus *bus);
+ resource_size_t pcibios_window_alignment(struct pci_bus *bus,
+ 					 unsigned long type);
+diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
+index c129162..c503ac9 100644
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -1042,6 +1042,12 @@
+ #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
+ #define PCI_DEVICE_ID_SGI_IOC4		0x100a
+ 
++#define PCI_VENDOR_ID_INFINEON		0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
++#define PCI_VENDOR_ID_LANTIQ		0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE	0x00
++
+ #define PCI_VENDOR_ID_WINBOND		0x10ad
+ #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+ #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch b/target/linux/lantiq/patches-3.10/0002-MIPS-lantiq-adds-minimal-dcdc-driver.patch
index 3d488a1..560cc1d 100644
--- a/target/linux/lantiq/patches-3.8/0031-MIPS-lantiq-adds-minimal-dcdc-driver.patch
+++ b/target/linux/lantiq/patches-3.10/0002-MIPS-lantiq-adds-minimal-dcdc-driver.patch
@@ -1,17 +1,22 @@
-From 1f95983593d5b6634c13ead8f923237484dc611e Mon Sep 17 00:00:00 2001
+From 82a678435e9937dc8a7cb801f476e340fcfbc23e Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
-Date: Wed, 5 Dec 2012 17:38:48 +0100
-Subject: [PATCH 31/40] MIPS: lantiq: adds minimal dcdc driver
+Date: Thu, 8 Aug 2013 14:02:23 +0200
+Subject: [PATCH 02/34] MIPS: lantiq: adds minimal dcdc driver
 
 This driver so far only reads the core voltage.
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
+
+Acked-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5677/
 ---
  arch/mips/lantiq/xway/Makefile |    2 +-
- arch/mips/lantiq/xway/dcdc.c   |   74 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 75 insertions(+), 1 deletion(-)
+ arch/mips/lantiq/xway/dcdc.c   |   63 ++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+), 1 deletion(-)
  create mode 100644 arch/mips/lantiq/xway/dcdc.c
 
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 7a13660..087497d 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,3 +1,3 @@
@@ -19,9 +24,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
  
  obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
+new file mode 100644
+index 0000000..7688ac0
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/dcdc.c
-@@ -0,0 +1,74 @@
+@@ -0,0 +1,63 @@
 +/*
 + *  This program is free software; you can redistribute it and/or modify it
 + *  under the terms of the GNU General Public License version 2 as published
@@ -31,11 +39,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 + *  Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
 + */
 +
-+#include <linux/interrupt.h>
 +#include <linux/ioport.h>
-+#include <linux/module.h>
 +#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
 +
 +#include <lantiq_soc.h>
 +
@@ -54,19 +59,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	struct resource *res;
 +
 +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "Failed to get resource\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* remap dcdc register range */
-+	dcdc_membase = devm_request_and_ioremap(&pdev->dev, res);
-+	if (!dcdc_membase) {
-+		dev_err(&pdev->dev, "Failed to remap resource\n");
-+		return -ENOMEM;
-+	}
++	dcdc_membase = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(dcdc_membase))
++		return PTR_ERR(dcdc_membase);
 +
-+	dev_info(&pdev->dev, "Core Voltage : %d mV\n", dcdc_r8(DCDC_BIAS_VREG1) * 8);
++	dev_info(&pdev->dev, "Core Voltage : %d mV\n",
++		dcdc_r8(DCDC_BIAS_VREG1) * 8);
 +
 +	return 0;
 +}
@@ -75,7 +73,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	{ .compatible = "lantiq,dcdc-xrx200" },
 +	{},
 +};
-+MODULE_DEVICE_TABLE(of, dcdc_match);
 +
 +static struct platform_driver dcdc_driver = {
 +	.probe = dcdc_probe,
@@ -96,3 +93,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
 +arch_initcall(dcdc_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0004-MIPS-lantiq-falcon-add-cpu-feature-override.h.patch b/target/linux/lantiq/patches-3.10/0004-MIPS-lantiq-falcon-add-cpu-feature-override.h.patch
new file mode 100644
index 0000000..9e4138a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0004-MIPS-lantiq-falcon-add-cpu-feature-override.h.patch
@@ -0,0 +1,84 @@
+From e451973421b255917496c8ef784f8a5c92bb5548 Mon Sep 17 00:00:00 2001
+From: Thomas Langer <thomas.langer@lantiq.com>
+Date: Thu, 8 Aug 2013 11:07:25 +0200
+Subject: [PATCH 04/34] MIPS: lantiq: falcon: add cpu-feature-override.h
+
+Add cpu-feature-override.h for the GPON SoC
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Acked-by: John Crispin <blogic@openwrt.org>
+
+Acked-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5658/
+---
+ .../asm/mach-lantiq/falcon/cpu-feature-overrides.h |   58 ++++++++++++++++++++
+ 1 file changed, 58 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..096a100
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
+@@ -0,0 +1,58 @@
++/*
++ *  Lantiq FALCON specific CPU feature overrides
++ *
++ *  Copyright (C) 2013 Thomas Langer, Lantiq Deutschland
++ *
++ *  This file was derived from: include/asm-mips/cpu-features.h
++ *	Copyright (C) 2003, 2004 Ralf Baechle
++ *	Copyright (C) 2004 Maciej W. Rozycki
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb		1
++#define cpu_has_4kex		1
++#define cpu_has_3k_cache	0
++#define cpu_has_4k_cache	1
++#define cpu_has_tx39_cache	0
++#define cpu_has_sb1_cache	0
++#define cpu_has_fpu		0
++#define cpu_has_32fpr		0
++#define cpu_has_counter		1
++#define cpu_has_watch		1
++#define cpu_has_divec		1
++
++#define cpu_has_prefetch	1
++#define cpu_has_ejtag		1
++#define cpu_has_llsc		1
++
++#define cpu_has_mips16		1
++#define cpu_has_mdmx		0
++#define cpu_has_mips3d		0
++#define cpu_has_smartmips	0
++
++#define cpu_has_mips32r1	1
++#define cpu_has_mips32r2	1
++#define cpu_has_mips64r1	0
++#define cpu_has_mips64r2	0
++
++#define cpu_has_dsp		1
++#define cpu_has_mipsmt		1
++
++#define cpu_has_vint		1
++#define cpu_has_veic		1
++
++#define cpu_has_64bits		0
++#define cpu_has_64bit_zero_reg	0
++#define cpu_has_64bit_gp_regs	0
++#define cpu_has_64bit_addresses	0
++
++#define cpu_dcache_line_size()	32
++#define cpu_icache_line_size()	32
++
++#endif /* __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0005-MIPS-lantiq-falcon-fix-asc-clock-definition.patch b/target/linux/lantiq/patches-3.10/0005-MIPS-lantiq-falcon-fix-asc-clock-definition.patch
new file mode 100644
index 0000000..7ec3cc5
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0005-MIPS-lantiq-falcon-fix-asc-clock-definition.patch
@@ -0,0 +1,48 @@
+From 64d344de9e5d8ab6d94189360237b0cb36a24d1a Mon Sep 17 00:00:00 2001
+From: Thomas Langer <thomas.langer@lantiq.com>
+Date: Thu, 8 Aug 2013 11:07:26 +0200
+Subject: [PATCH 05/34] MIPS: lantiq: falcon: fix asc clock definition
+
+The clocks of the serial ports were not setup properly.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Acked-by: John Crispin <blogic@openwrt.org>
+
+Acked-by: John Crispin <blogic@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/5659/
+---
+ arch/mips/lantiq/falcon/sysctrl.c |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+index ff4894a..8f1866d 100644
+--- a/arch/mips/lantiq/falcon/sysctrl.c
++++ b/arch/mips/lantiq/falcon/sysctrl.c
+@@ -48,6 +48,7 @@
+ #define CPU0CC_CPUDIV		0x0001
+ 
+ /* Activation Status Register */
++#define ACTS_ASC0_ACT	0x00001000
+ #define ACTS_ASC1_ACT	0x00000800
+ #define ACTS_I2C_ACT	0x00004000
+ #define ACTS_P0		0x00010000
+@@ -108,6 +109,7 @@ static void sysctl_deactivate(struct clk *clk)
+ static int sysctl_clken(struct clk *clk)
+ {
+ 	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
++	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
+ 	sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
+ 	return 0;
+ }
+@@ -256,6 +258,7 @@ void __init ltq_soc_init(void)
+ 	clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
+ 	clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
+ 	clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
+-	clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
++	clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
++	clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
+ 	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
+ }
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0017-owrt-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.10/0006-MIPS-lantiq-dtb-image-hack.patch
index 5110b7f..6174568 100644
--- a/target/linux/lantiq/patches-3.9/0017-owrt-lantiq-dtb-image-hack.patch
+++ b/target/linux/lantiq/patches-3.10/0006-MIPS-lantiq-dtb-image-hack.patch
@@ -1,13 +1,16 @@
-From 34188b104874841296548a8c7e09d6e98771634f Mon Sep 17 00:00:00 2001
+From 7d62b24b4d94dabadeed552d84ac2665d53a802f Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 17/22] owrt: lantiq dtb image hack
+Subject: [PATCH 06/34] MIPS: lantiq: dtb image hack
 
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/lantiq/Makefile |    2 --
  arch/mips/lantiq/prom.c   |    4 +++-
  2 files changed, 3 insertions(+), 3 deletions(-)
 
+diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
+index d6bdc57..690257a 100644
 --- a/arch/mips/lantiq/Makefile
 +++ b/arch/mips/lantiq/Makefile
 @@ -6,8 +6,6 @@
@@ -19,9 +22,11 @@ Subject: [PATCH 17/22] owrt: lantiq dtb image hack
  obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
  
  obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 9f9e875..72b183a 100644
 --- a/arch/mips/lantiq/prom.c
 +++ b/arch/mips/lantiq/prom.c
-@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(voi
+@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(void)
  	}
  }
  
@@ -39,3 +44,6 @@ Subject: [PATCH 17/22] owrt: lantiq dtb image hack
  }
  
  void __init device_tree_init(void)
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0019-owrt-lantiq-handle-vmmc-memory-reservation.patch b/target/linux/lantiq/patches-3.10/0007-MIPS-lantiq-handle-vmmc-memory-reservation.patch
index cb6811a..50076bc 100644
--- a/target/linux/lantiq/patches-3.9/0019-owrt-lantiq-handle-vmmc-memory-reservation.patch
+++ b/target/linux/lantiq/patches-3.10/0007-MIPS-lantiq-handle-vmmc-memory-reservation.patch
@@ -1,24 +1,28 @@
-From 12ec61455ea440c164c3ff777adbedea350b1e08 Mon Sep 17 00:00:00 2001
+From 45aa29b444db4b0bf9ff49f8b9ca010608a6825b Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 10:04:01 +0100
-Subject: [PATCH 19/22] owrt: lantiq: handle vmmc memory reservation
+Subject: [PATCH 07/34] MIPS: lantiq: handle vmmc memory reservation
 
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
- arch/mips/lantiq/xway/Makefile |    2 +-
+ arch/mips/lantiq/xway/Makefile |    2 ++
  arch/mips/lantiq/xway/vmmc.c   |   63 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 1 deletion(-)
+ 2 files changed, 65 insertions(+)
  create mode 100644 arch/mips/lantiq/xway/vmmc.c
 
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 087497d..a2edc53 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,6 +1,6 @@
+@@ -1,3 +1,5 @@
  obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
  
--obj-y += eth_mac.o
-+obj-y += eth_mac.o vmmc.o
- obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
- 
++obj-y += vmmc.o
++
  obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/vmmc.c b/arch/mips/lantiq/xway/vmmc.c
+new file mode 100644
+index 0000000..6dedf77
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/vmmc.c
 @@ -0,0 +1,63 @@
@@ -85,3 +89,6 @@ Subject: [PATCH 19/22] owrt: lantiq: handle vmmc memory reservation
 +};
 +
 +module_platform_driver(vmmc_driver);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0009-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.10/0008-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
index 810ea5d..274c5d9 100644
--- a/target/linux/lantiq/patches-3.9/0009-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ b/target/linux/lantiq/patches-3.10/0008-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -1,7 +1,7 @@
-From 615cd43fa886a79cf717bba38a3243aeb3b66217 Mon Sep 17 00:00:00 2001
+From 0721e9f0502e633390044e651970692213283686 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
-Date: Sat, 29 Jun 2013 19:13:39 +0200
-Subject: [PATCH 09/22] NET: PHY: adds driver for lantiq PHY11G
+Date: Wed, 13 Mar 2013 09:30:22 +0100
+Subject: [PATCH 27/40] NET: PHY: adds driver for lantiq PHY11G
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 --- /dev/null
 +++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,220 @@
+@@ -0,0 +1,231 @@
 +/*
 + *   This program is free software; you can redistribute it and/or modify
 + *   it under the terms of the GNU General Public License as published by
@@ -118,6 +118,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	/* Clear all pending interrupts */
 +	phy_read(phydev, MII_VR9_11G_ISTAT);
 +
++	vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
++	vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
++	vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
++	vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
++	vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
++	vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
++	vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
++	vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
++	vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
++	vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
++
 +	return 0;
 +}
 +
diff --git a/target/linux/lantiq/patches-3.9/0021-owrt-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-3.10/0009-MIPS-lantiq-add-atm-hack.patch
index 9c161bb..8229c44 100644
--- a/target/linux/lantiq/patches-3.9/0021-owrt-lantiq-add-atm-hack.patch
+++ b/target/linux/lantiq/patches-3.10/0009-MIPS-lantiq-add-atm-hack.patch
@@ -1,8 +1,9 @@
-From 51130632baa3dfabca87ce5d5b57376a7927b7d3 Mon Sep 17 00:00:00 2001
+From 65c07535b97006d7bd50ec14871a116e793a24ad Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 21/22] owrt: lantiq: add atm hack
+Subject: [PATCH 09/34] MIPS: lantiq: add atm hack
 
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/include/asm/mach-lantiq/lantiq_atm.h |  196 +++++++++++++++++++++++
  arch/mips/include/asm/mach-lantiq/lantiq_ptm.h |  203 ++++++++++++++++++++++++
@@ -15,6 +16,9 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
  create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
 
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_atm.h b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
+new file mode 100644
+index 0000000..bf045a9
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
 @@ -0,0 +1,196 @@
@@ -214,6 +218,9 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
 +
 +#endif  //  IFX_ATM_H
 +
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
+new file mode 100644
+index 0000000..698e5c3
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
 @@ -0,0 +1,203 @@
@@ -420,6 +427,8 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
 +
 +#endif  //  IFX_PTM_H
 +
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 5119487..6d2c486 100644
 --- a/arch/mips/lantiq/irq.c
 +++ b/arch/mips/lantiq/irq.c
 @@ -14,6 +14,7 @@
@@ -430,7 +439,7 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  
  #include <asm/bootinfo.h>
  #include <asm/irq_cpu.h>
-@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
+@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_data *d)
  	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
  	ltq_icu_w32(im, BIT(offset), isr);
  }
@@ -438,9 +447,11 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  
  static void ltq_ack_irq(struct irq_data *d)
  {
+diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
+index 5aeb3eb..11aa4e6 100644
 --- a/arch/mips/mm/cache.c
 +++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,8 @@ void (*_dma_cache_wback)(unsigned long s
+@@ -58,6 +58,8 @@ void (*_dma_cache_wback)(unsigned long start, unsigned long size);
  void (*_dma_cache_inv)(unsigned long start, unsigned long size);
  
  EXPORT_SYMBOL(_dma_cache_wback_inv);
@@ -449,6 +460,8 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  
  #endif /* CONFIG_DMA_NONCOHERENT */
  
+diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
+index 88399db..78c8bbc 100644
 --- a/include/uapi/linux/atm.h
 +++ b/include/uapi/linux/atm.h
 @@ -130,8 +130,14 @@
@@ -466,9 +479,11 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  struct atm_trafprm {
  	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
  	int		max_pcr;	/* maximum PCR in cells per second */
+diff --git a/net/atm/common.c b/net/atm/common.c
+index 737bef5..959008d 100644
 --- a/net/atm/common.c
 +++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
+@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct sock *sk)
  	write_unlock_irq(&vcc_sklist_lock);
  }
  
@@ -486,9 +501,11 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
  		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
  			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
+diff --git a/net/atm/proc.c b/net/atm/proc.c
+index bbb6461..ecb584a 100644
 --- a/net/atm/proc.c
 +++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
+@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
  static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
  {
  	static const char *const class_name[] = {
@@ -497,3 +514,6 @@ Subject: [PATCH 21/22] owrt: lantiq: add atm hack
  	static const char *const aal_name[] = {
  		"---",	"1",	"2",	"3/4",	/*  0- 3 */
  		"???",	"5",	"???",	"???",	/*  4- 7 */
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0018-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.10/0010-MIPS-lantiq-wifi-and-ethernet-eeprom-handling.patch
index 403ee97..a7b325e 100644
--- a/target/linux/lantiq/patches-3.9/0018-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-3.10/0010-MIPS-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -1,24 +1,25 @@
-From 591a9bdde1fa9aa6f1c6132ea04771bb1dcd6180 Mon Sep 17 00:00:00 2001
+From 8c19ced548538d964dcfb83bdf9ea9e8fbb7bdb1 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 10:02:58 +0100
-Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
+Subject: [PATCH 10/34] MIPS: lantiq: wifi and ethernet eeprom handling
 
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |    6 +
  .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
- arch/mips/lantiq/xway/Makefile                     |    3 +
- arch/mips/lantiq/xway/ath_eep.c                    |  248 ++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c                    |   76 ++++++
+ arch/mips/lantiq/xway/Makefile                     |    2 +
+ arch/mips/lantiq/xway/ath_eep.c                    |  237 ++++++++++++++++++++
  arch/mips/lantiq/xway/pci-ath-fixup.c              |  109 +++++++++
  arch/mips/lantiq/xway/rt_eep.c                     |   60 +++++
- arch/mips/pci/pci-lantiq.c                         |    2 +-
- 8 files changed, 506 insertions(+), 1 deletion(-)
+ 6 files changed, 417 insertions(+)
  create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
  create mode 100644 arch/mips/lantiq/xway/ath_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
  create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
  create mode 100644 arch/mips/lantiq/xway/rt_eep.c
 
+diff --git a/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+new file mode 100644
+index 0000000..095d261
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
 @@ -0,0 +1,6 @@
@@ -28,9 +29,11 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
 +
 +#endif /* _PCI_ATH_FIXUP */
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 133336b..779715c 100644
 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
  extern void ltq_pmu_enable(unsigned int module);
  extern void ltq_pmu_disable(unsigned int module);
  
@@ -39,18 +42,23 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +
  #endif /* CONFIG_SOC_TYPE_XWAY */
  #endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index da51fe0..0af7a54 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,3 +1,6 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+@@ -2,4 +2,6 @@ obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+ 
+ obj-y += vmmc.o
  
-+obj-y += eth_mac.o
 +obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
 +
  obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
+diff --git a/arch/mips/lantiq/xway/ath_eep.c b/arch/mips/lantiq/xway/ath_eep.c
+new file mode 100644
+index 0000000..1146f01
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,248 @@
+@@ -0,0 +1,237 @@
 +/*
 + *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
 + *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
@@ -74,6 +82,7 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +#include <linux/mtd/mtd.h>
 +#include <pci-ath-fixup.h>
 +#include <lantiq_soc.h>
++#include <linux/of_net.h>
 +
 +extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
 +struct ath5k_platform_data ath5k_pdata;
@@ -91,8 +100,6 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
 +{
 +	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
 +	int mac_offset;
 +	u32 mac_inc = 0, pci_slot = 0;
 +	int i;
@@ -102,36 +109,41 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +	const char *part;
 +	phandle phandle;
 +
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath9k_pdata.eeprom_data);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		memcpy_fromio(ath9k_pdata.eeprom_data, eep,
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1);
++	list = of_get_property(np, "ath,eep-flash", &i);
++	if (!list || (i !=  (2 * sizeof(*list)))) {
++		dev_err(&pdev->dev, "failed to find ath,eep-flash\n");
++		return -ENODEV;
++	}
++
++	phandle = be32_to_cpup(list++);
++	if (!phandle) {
++		dev_err(&pdev->dev, "failed to find phandle\n");
++		return -ENODEV;
++	}
++
++	mtd_np = of_find_node_by_phandle(phandle);
++	if (!mtd_np) {
++		dev_err(&pdev->dev, "failed to find mtd node\n");
++		return -ENODEV;
++	}
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	the_mtd = get_mtd_device_nm(part);
++	if (the_mtd == ERR_PTR(-ENODEV)) {
++		dev_err(&pdev->dev, "failed to find mtd device\n");
++		return -ENODEV;
++	}
++
++	i = mtd_read(the_mtd, be32_to_cpup(list),
++			ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++			(void *) ath9k_pdata.eeprom_data);
++	put_mtd_device(the_mtd);
++	if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
++		dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++		return -ENODEV;
 +	}
 +
 +	if (of_find_property(np, "ath,eep-swap", NULL))
@@ -146,18 +158,10 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +
 +	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
 +		memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data + mac_offset, 6);
-+	} else if (mac_res) {
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+	} else if (ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+	else {
-+		dev_warn(&pdev->dev, "using random mac\n");
++	} else {
 +		random_ether_addr(athxk_eeprom_mac);
++		if (of_get_mac_address_mtd(np, athxk_eeprom_mac))
++			dev_warn(&pdev->dev, "using random mac\n");
 +	}
 +
 +	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
@@ -168,7 +172,6 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +
 +	if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
 +		ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
 +		dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
 +	}
 +
@@ -194,7 +197,7 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +{
 +	return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
 +}
-+arch_initcall(of_ath9k_eeprom_init);
++late_initcall(of_ath9k_eeprom_init);
 +
 +
 +static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
@@ -206,8 +209,6 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
 +{
 +	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
 +	int mac_offset;
 +	u32 mac_inc = 0;
 +	int i;
@@ -217,57 +218,53 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +	const char *part;
 +	phandle phandle;
 +
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath5k_pdata.eeprom_data);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
-+				|| i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		memcpy_fromio(ath5k_pdata.eeprom_data, eep,
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1);
++	list = of_get_property(np, "ath,eep-flash", &i);
++	if (!list || (i !=  (2 * sizeof(*list)))) {
++		dev_err(&pdev->dev, "failed to find ath,eep-flash\n");
++		return -ENODEV;
++	}
++
++	phandle = be32_to_cpup(list++);
++	if (!phandle) {
++		dev_err(&pdev->dev, "failed to find phandle\n");
++		return -ENODEV;
++	}
++
++	mtd_np = of_find_node_by_phandle(phandle);
++	if (!mtd_np) {
++		dev_err(&pdev->dev, "failed to find mtd node\n");
++		return -ENODEV;
++	}
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	the_mtd = get_mtd_device_nm(part);
++	if (the_mtd == ERR_PTR(-ENODEV)) {
++		dev_err(&pdev->dev, "failed to find mtd device\n");
++		return -ENODEV;
++	}
++
++	i = mtd_read(the_mtd, be32_to_cpup(list),
++			ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
++			(void *) ath5k_pdata.eeprom_data);
++	put_mtd_device(the_mtd);
++	if ((sizeof(ath5k_pdata.eeprom_data) != flash_readlen) || i) {
++		dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
++		return -ENODEV;
 +	}
 +
 +	if (of_find_property(np, "ath,eep-swap", NULL))
 +		for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+			ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
++			ath5k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
 +
 +	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
 +		memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
-+	} else if (mac_res) {
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+	} else if (ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+	else {
-+		dev_warn(&pdev->dev, "using random mac\n");
++	} else {
 +		random_ether_addr(athxk_eeprom_mac);
++		if (of_get_mac_address_mtd(np, athxk_eeprom_mac))
++			dev_warn(&pdev->dev, "using random mac\n");
 +	}
 +
 +	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
@@ -299,85 +296,9 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
 +}
 +device_initcall(of_ath5k_eeprom_init);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/eth_mac.c
-@@ -0,0 +1,76 @@
-+/*
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/if_ether.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+	return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+	eth_mac_set = mac_pton(str, eth_mac);
-+	return !eth_mac_set;
-+}
-+__setup("ethaddr=", setup_ethaddr);
-+
-+int __init of_eth_mac_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct resource *mac_res;
-+	void __iomem *mac;
-+	u32 mac_inc = 0;
-+
-+	if (eth_mac_set) {
-+		dev_err(&pdev->dev, "mac was already set by bootloader\n");
-+		return -EINVAL;
-+	}
-+	mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+	if (!mac_res) {
-+		dev_err(&pdev->dev, "failed to load mac\n");
-+		return -EINVAL;
-+	}
-+	if (resource_size(mac_res) != 6) {
-+		dev_err(&pdev->dev, "mac has an invalid size\n");
-+		return -EINVAL;
-+	}
-+	mac = ioremap(mac_res->start, resource_size(mac_res));
-+	memcpy_fromio(eth_mac, mac, 6);
-+
-+	if (!of_property_read_u32(np, "mac-increment", &mac_inc))
-+		eth_mac[5] += mac_inc;
-+
-+	return 0;
-+}
-+
-+static struct of_device_id eth_mac_ids[] = {
-+	{ .compatible = "lantiq,eth-mac" },
-+	{ /* sentinel */ }
-+};
-+
-+static struct platform_driver eth_mac_driver = {
-+	.driver		= {
-+		.name		= "lantiq,eth-mac",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(eth_mac_ids),
-+	},
-+};
-+
-+static int __init of_eth_mac_init(void)
-+{
-+	return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
-+}
-+device_initcall(of_eth_mac_init);
+diff --git a/arch/mips/lantiq/xway/pci-ath-fixup.c b/arch/mips/lantiq/xway/pci-ath-fixup.c
+new file mode 100644
+index 0000000..c87ffb2
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
 @@ -0,0 +1,109 @@
@@ -490,6 +411,9 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +	ath_fixups[ath_num_fixups].cal_data = cal_data;
 +	ath_num_fixups++;
 +}
+diff --git a/arch/mips/lantiq/xway/rt_eep.c b/arch/mips/lantiq/xway/rt_eep.c
+new file mode 100644
+index 0000000..00f2d4c
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/rt_eep.c
 @@ -0,0 +1,60 @@
@@ -553,3 +477,6 @@ Subject: [PATCH 18/22] owrt: lantiq: wifi and ethernet eeprom handling
 +	return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
 +}
 +device_initcall(of_ralink_eeprom_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0011-MIPS-lantiq-add-reset-controller-api-support.patch b/target/linux/lantiq/patches-3.10/0011-MIPS-lantiq-add-reset-controller-api-support.patch
new file mode 100644
index 0000000..f5c1b6e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0011-MIPS-lantiq-add-reset-controller-api-support.patch
@@ -0,0 +1,95 @@
+From ab066a50a4aa00a862f467579960e8d12693df18 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 3 Sep 2013 13:18:12 +0200
+Subject: [PATCH 11/34] MIPS: lantiq: add reset-controller api support
+
+Add a reset-controller binding for the reset registers found on the lantiq
+SoC.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/reset.c |   61 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index 1fa0f17..a1e06b7 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -14,6 +14,7 @@
+ #include <linux/delay.h>
+ #include <linux/of_address.h>
+ #include <linux/of_platform.h>
++#include <linux/reset-controller.h>
+ 
+ #include <asm/reboot.h>
+ 
+@@ -113,6 +114,66 @@ void ltq_reset_once(unsigned int module, ulong u)
+ 	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
+ }
+ 
++static int ltq_assert_device(struct reset_controller_dev *rcdev,
++				unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = ltq_rcu_r32(RCU_RST_REQ);
++	val |= BIT(id);
++	ltq_rcu_w32(val, RCU_RST_REQ);
++
++	return 0;
++}
++
++static int ltq_deassert_device(struct reset_controller_dev *rcdev,
++				  unsigned long id)
++{
++	u32 val;
++
++	if (id < 8)
++		return -1;
++
++	val = ltq_rcu_r32(RCU_RST_REQ);
++	val &= ~BIT(id);
++	ltq_rcu_w32(val, RCU_RST_REQ);
++
++	return 0;
++}
++
++static int ltq_reset_device(struct reset_controller_dev *rcdev,
++			       unsigned long id)
++{
++	ltq_assert_device(rcdev, id);
++	return ltq_deassert_device(rcdev, id);
++}
++
++static struct reset_control_ops reset_ops = {
++	.reset = ltq_reset_device,
++	.assert = ltq_assert_device,
++	.deassert = ltq_deassert_device,
++};
++
++static struct reset_controller_dev reset_dev = {
++	.ops			= &reset_ops,
++	.owner			= THIS_MODULE,
++	.nr_resets		= 32,
++	.of_reset_n_cells	= 1,
++};
++
++void ltq_rst_init(void)
++{
++	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
++						"lantiq,xway-reset");
++	if (!reset_dev.of_node)
++		pr_err("Failed to find reset controller node");
++	else
++		reset_controller_register(&reset_dev);
++}
++
+ static void ltq_machine_restart(char *command)
+ {
+ 	local_irq_disable();
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.10/0012-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
index 6df2beb..e57fb36 100644
--- a/target/linux/lantiq/patches-3.8/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ b/target/linux/lantiq/patches-3.10/0012-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@@ -1,7 +1,7 @@
-From e65ecb8f256b5839690a240d9b14e303686f9ede Mon Sep 17 00:00:00 2001
+From 65d48cd98505800c6765ff94fc007797e00d466f Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Tue, 29 Jan 2013 21:11:55 +0100
-Subject: [PATCH 01/40] MTD: m25p80: allow loading mtd name from OF
+Subject: [PATCH 12/34] MTD: m25p80: allow loading mtd name from OF
 
 In accordance with the physmap flash we should honour the linux,mtd-name
 property when deciding what name the mtd device has.
@@ -12,9 +12,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  drivers/mtd/devices/m25p80.c |    5 +++++
  1 file changed, 5 insertions(+)
 
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index 2f3d2a5..1828704 100644
 --- a/drivers/mtd/devices/m25p80.c
 +++ b/drivers/mtd/devices/m25p80.c
-@@ -828,10 +828,13 @@ static int m25p_probe(struct spi_device
+@@ -909,10 +909,13 @@ static int m25p_probe(struct spi_device *spi)
  	unsigned			i;
  	struct mtd_part_parser_data	ppdata;
  	struct device_node __maybe_unused *np = spi->dev.of_node;
@@ -28,7 +30,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #endif
  
  	/* Platform data helps sort out which chip type we have, as
-@@ -907,6 +910,8 @@ static int m25p_probe(struct spi_device
+@@ -988,6 +991,8 @@ static int m25p_probe(struct spi_device *spi)
  
  	if (data && data->name)
  		flash->mtd.name = data->name;
@@ -37,3 +39,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	else
  		flash->mtd.name = dev_name(&spi->dev);
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch b/target/linux/lantiq/patches-3.10/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
index ea6ce5b..d05361a 100644
--- a/target/linux/lantiq/patches-3.9/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.10/0013-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
@@ -1,7 +1,7 @@
-From 6bfb122580ccf67b82abf6c5fe2ae1e770812f0d Mon Sep 17 00:00:00 2001
+From f910293ab75fcdbf4989539f1c7eb7a04f17e803 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 30 Jan 2013 21:12:47 +0100
-Subject: [PATCH 13/22] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
+Subject: [PATCH 13/34] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
 
 The driver uses plat_nand. As the platform_device is loaded from DT, we need
 to lookup the node and attach our falcon specific "struct platform_nand_data"
@@ -16,9 +16,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 92 insertions(+)
  create mode 100644 drivers/mtd/nand/falcon_nand.c
 
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index a60f6c1..74b1323 100644
 --- a/drivers/mtd/nand/Kconfig
 +++ b/drivers/mtd/nand/Kconfig
-@@ -574,4 +574,12 @@ config MTD_NAND_XWAY
+@@ -544,4 +544,12 @@ config MTD_NAND_XWAY
  	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
  	  to the External Bus Unit (EBU).
  
@@ -31,15 +33,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +	  attached to the External Bus Unit (EBU).
 +
  endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index bb81891..feb7c9d 100644
 --- a/drivers/mtd/nand/Makefile
 +++ b/drivers/mtd/nand/Makefile
-@@ -53,5 +53,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740
+@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
  obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
  obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
  obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
 +obj-$(CONFIG_MTD_NAND_FALCON)		+= falcon_nand.o
  
  nand-objs := nand_base.o nand_bbt.o
+diff --git a/drivers/mtd/nand/falcon_nand.c b/drivers/mtd/nand/falcon_nand.c
+new file mode 100644
+index 0000000..13458d3
 --- /dev/null
 +++ b/drivers/mtd/nand/falcon_nand.c
 @@ -0,0 +1,83 @@
@@ -126,3 +133,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +}
 +
 +arch_initcall(falcon_register_nand);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0015-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-3.10/0014-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
index 661a4bf..70f32dc 100644
--- a/target/linux/lantiq/patches-3.9/0015-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ b/target/linux/lantiq/patches-3.10/0014-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -1,15 +1,17 @@
-From 861d86dc228cc78ebca1612e4f978bf057cab31d Mon Sep 17 00:00:00 2001
+From 2be714d9730da5723de68b4f9bfd5941ccd5bc4c Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 29 Jun 2013 19:21:22 +0200
-Subject: [PATCH 15/22] MTD: lantiq: handle NO_XIP on cfi0001 flash
+Subject: [PATCH 14/34] MTD: lantiq: handle NO_XIP on cfi0001 flash
 
 ---
  drivers/mtd/maps/lantiq-flash.c |    6 +++++-
  1 file changed, 5 insertions(+), 1 deletion(-)
 
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index d7ac65d..95b155a 100644
 --- a/drivers/mtd/maps/lantiq-flash.c
 +++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -135,7 +135,11 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -134,7 +134,11 @@ ltq_mtd_probe(struct platform_device *pdev)
  	}
  
  	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
@@ -22,3 +24,6 @@ Subject: [PATCH 15/22] MTD: lantiq: handle NO_XIP on cfi0001 flash
  	ltq_mtd->map->size = resource_size(ltq_mtd->res);
  	ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res);
  	if (IS_ERR(ltq_mtd->map->virt)) {
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0015-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-3.10/0015-MTD-lantiq-xway-fix-invalid-operator.patch
new file mode 100644
index 0000000..1300f3e
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0015-MTD-lantiq-xway-fix-invalid-operator.patch
@@ -0,0 +1,29 @@
+From 097e8f7eb70a89f4e8ae57ceb7669e7c3ad40846 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 18:03:54 +0200
+Subject: [PATCH 15/34] MTD: lantiq: xway: fix invalid operator
+
+xway_read_byte should use a logic or and not an add operator when working out
+the nand address.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index 3f81dc8..169a91d 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
+ 	int ret;
+ 
+ 	spin_lock_irqsave(&ebu_lock, flags);
+-	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
++	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ 
+ 	return ret;
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0016-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-3.10/0016-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
new file mode 100644
index 0000000..bd38b07
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0016-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
@@ -0,0 +1,49 @@
+From 1e4f35a2ec92447818e89432ec297f14ac66c7c1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 18:06:39 +0200
+Subject: [PATCH 16/34] MTD: lantiq: xway: the latched command should be
+ persistent
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index 169a91d..7f2bdd1 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,6 +54,8 @@
+ #define NAND_CON_CSMUX		(1 << 1)
+ #define NAND_CON_NANDM		1
+ 
++static u32 xway_latchcmd;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ 	unsigned long flags;
+ 
+ 	if (ctrl & NAND_CTRL_CHANGE) {
+-		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+ 		if (ctrl & NAND_CLE)
+-			nandaddr |= NAND_WRITE_CMD;
+-		else
+-			nandaddr |= NAND_WRITE_ADDR;
+-		this->IO_ADDR_W = (void __iomem *) nandaddr;
++			xway_latchcmd = NAND_WRITE_CMD;
++		else if (ctrl & NAND_ALE)
++			xway_latchcmd = NAND_WRITE_ADDR;
+ 	}
+ 
+ 	if (cmd != NAND_CMD_NONE) {
+ 		spin_lock_irqsave(&ebu_lock, flags);
+-		writeb(cmd, this->IO_ADDR_W);
++		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
+ 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ 			;
+ 		spin_unlock_irqrestore(&ebu_lock, flags);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0017-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-3.10/0017-MTD-lantiq-xway-remove-endless-loop.patch
new file mode 100644
index 0000000..7262071
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0017-MTD-lantiq-xway-remove-endless-loop.patch
@@ -0,0 +1,46 @@
+From 43c13af427d6900c7ce0111c53d3a428146b3f50 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 18:02:06 +0200
+Subject: [PATCH 17/34] MTD: lantiq: xway: remove endless loop
+
+The reset loop logic could run into a endless loop. Lets fix it as requested.
+
+--> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index 7f2bdd1..8d14f1b 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -59,16 +59,22 @@ static u32 xway_latchcmd;
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
++	unsigned long timeout;
+ 	unsigned long flags;
+ 
+ 	nandaddr &= ~NAND_WRITE_ADDR;
+ 	nandaddr |= NAND_WRITE_CMD;
+ 
+ 	/* finish with a reset */
++	timeout = jiffies + msecs_to_jiffies(20);
++
+ 	spin_lock_irqsave(&ebu_lock, flags);
+ 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+-	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+-		;
++	do {
++		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++			break;
++		cond_resched();
++	} while (!time_after_eq(jiffies, timeout));
+ 	spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0018-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-3.10/0018-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
new file mode 100644
index 0000000..12c7677
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0018-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
@@ -0,0 +1,60 @@
+From 0e75433962d619e4f9dcab57643223d85db0b880 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 28 Jul 2013 17:59:51 +0200
+Subject: [PATCH 18/34] MTD: lantiq: xway: add missing write_buf and read_buf
+ to nand driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c |   28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index 8d14f1b..f813a55 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(struct mtd_info *mtd)
+ 	return ret;
+ }
+ 
++static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++	struct nand_chip *this = mtd->priv;
++	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++	for (i = 0; i < len; i++)
++		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
++static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++	struct nand_chip *this = mtd->priv;
++	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++	unsigned long flags;
++	int i;
++
++	spin_lock_irqsave(&ebu_lock, flags);
++	for (i = 0; i < len; i++)
++		ltq_w8(buf[i], (void __iomem *)nandaddr);
++	spin_unlock_irqrestore(&ebu_lock, flags);
++}
++
+ static int xway_nand_probe(struct platform_device *pdev)
+ {
+ 	struct nand_chip *this = platform_get_drvdata(pdev);
+@@ -181,6 +207,8 @@ static struct platform_nand_data xway_nand_data = {
+ 		.dev_ready	= xway_dev_ready,
+ 		.select_chip	= xway_select_chip,
+ 		.read_byte	= xway_read_byte,
++		.read_buf	= xway_read_buf,
++		.write_buf	= xway_write_buf,
+ 	}
+ };
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0008-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.10/0019-NET-lantiq-adds-PHY11G-firmware-blobs.patch
index 449926a..4411c94 100644
--- a/target/linux/lantiq/patches-3.9/0008-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ b/target/linux/lantiq/patches-3.10/0019-NET-lantiq-adds-PHY11G-firmware-blobs.patch
@@ -1,7 +1,7 @@
-From cdada9758f836cb6a842c29de435465fe66d66a2 Mon Sep 17 00:00:00 2001
+From 316ec4394a58228dc74392766a266952456d3a06 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 08/22] NET: lantiq: adds PHY11G firmware blobs
+Subject: [PATCH 19/34] NET: lantiq: adds PHY11G firmware blobs
 
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
@@ -12,18 +12,23 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 firmware/lantiq/COPYING
  create mode 100644 firmware/lantiq/README
 
+diff --git a/firmware/Makefile b/firmware/Makefile
+index cbb09ce..c8697df 100644
 --- a/firmware/Makefile
 +++ b/firmware/Makefile
-@@ -134,6 +134,9 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
+@@ -134,6 +134,9 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
  fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
  fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
  fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a1x.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a2x.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy22f_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin
++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin
  fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
  
  fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
+diff --git a/firmware/lantiq/COPYING b/firmware/lantiq/COPYING
+new file mode 100644
+index 0000000..5ec70b2
 --- /dev/null
 +++ b/firmware/lantiq/COPYING
 @@ -0,0 +1,286 @@
@@ -313,6 +318,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +POSSIBILITY OF SUCH DAMAGES.
 +
 +		     END OF TERMS AND CONDITIONS
+diff --git a/firmware/lantiq/README b/firmware/lantiq/README
+new file mode 100644
+index 0000000..cb1a10a
 --- /dev/null
 +++ b/firmware/lantiq/README
 @@ -0,0 +1,45 @@
@@ -361,3 +369,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +# GPHY core on Lantiq XWAY VR9 v1.1
 +lantiq/vr9_phy11g_a2x.bin
 +lantiq/vr9_phy22f_a2x.bin
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0007-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
index 3853931..0b2d36c 100644
--- a/target/linux/lantiq/patches-3.9/0007-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ b/target/linux/lantiq/patches-3.10/0020-NET-MIPS-lantiq-adds-xrx200-net.patch
@@ -1,7 +1,7 @@
-From 0d37b9ab3cff327b7db083785a89f23944c192f4 Mon Sep 17 00:00:00 2001
+From 5c7a5ddaf069b7061e1c7b536756b0b70d37b991 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
+Subject: [PATCH 20/34] NET: MIPS: lantiq: adds xrx200-net
 
 ---
  drivers/net/ethernet/Kconfig         |    8 +-
@@ -12,6 +12,8 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
  create mode 100644 drivers/net/ethernet/lantiq_pce.h
  create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
 
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index ed956e0..9261fe4 100644
 --- a/drivers/net/ethernet/Kconfig
 +++ b/drivers/net/ethernet/Kconfig
 @@ -83,7 +83,13 @@ config LANTIQ_ETOP
@@ -29,6 +31,8 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
  
  source "drivers/net/ethernet/marvell/Kconfig"
  source "drivers/net/ethernet/mellanox/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index 8268d85..e8410d8 100644
 --- a/drivers/net/ethernet/Makefile
 +++ b/drivers/net/ethernet/Makefile
 @@ -36,6 +36,7 @@ obj-$(CONFIG_IP1000) += icplus/
@@ -39,6 +43,9 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
  obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
  obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
  obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+diff --git a/drivers/net/ethernet/lantiq_pce.h b/drivers/net/ethernet/lantiq_pce.h
+new file mode 100644
+index 0000000..0c38efe
 --- /dev/null
 +++ b/drivers/net/ethernet/lantiq_pce.h
 @@ -0,0 +1,163 @@
@@ -205,6 +212,9 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
 +	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
 +	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
 +};
+diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
+new file mode 100644
+index 0000000..2d40c64
 --- /dev/null
 +++ b/drivers/net/ethernet/lantiq_xrx200.c
 @@ -0,0 +1,1203 @@
@@ -445,7 +455,7 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
 +	int num_port;
 +	int wan;
 +	unsigned short port_map;
-+	const void *mac;
++	unsigned char mac[6];
 +
 +	struct xrx200_hw *hw;
 +};
@@ -1267,7 +1277,7 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
 +	/* setup our private data */
 +	priv = netdev_priv(hw->devs[hw->num_devs]);
 +	priv->hw = hw;
-+	priv->mac = of_get_mac_address(iface);
++	of_get_mac_address_mtd(iface, priv->mac);
 +	priv->id = hw->num_devs;
 +
 +	/* is this the wan interface ? */
@@ -1411,3 +1421,6 @@ Subject: [PATCH 07/22] NET: MIPS: lantiq: adds xrx200-net
 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
 +MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
 +MODULE_LICENSE("GPL");
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0010-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch b/target/linux/lantiq/patches-3.10/0021-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
index 6d1b222..82f8869 100644
--- a/target/linux/lantiq/patches-3.9/0010-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
+++ b/target/linux/lantiq/patches-3.10/0021-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
@@ -1,12 +1,14 @@
-From fd69e82feee0966fd61374ea76d6ff36ce42e51c Mon Sep 17 00:00:00 2001
+From e8c43773eac79f73f2dc4f10abd6d76f88540e91 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sat, 29 Jun 2013 19:42:16 +0200
-Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
+Subject: [PATCH 21/34] NET: MIPS: lantiq: update etop driver for devicetree
 
 ---
- drivers/net/ethernet/lantiq_etop.c |  500 +++++++++++++++++++++++++-----------
- 1 file changed, 354 insertions(+), 146 deletions(-)
+ drivers/net/ethernet/lantiq_etop.c |  501 +++++++++++++++++++++++++-----------
+ 1 file changed, 355 insertions(+), 146 deletions(-)
 
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index bfdb0686..cdc0c0e 100644
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
 @@ -12,7 +12,7 @@
@@ -33,13 +35,15 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  #define ETOP_MII_REVERSE	0xe
  #define ETOP_PLEN_UNDER		0x40
  #define ETOP_CGEN		0x800
-+#define ETOP_CFG_MII0		0x01
- 
+-
 -/* use 2 static channels for TX/RX */
 -#define LTQ_ETOP_TX_CHANNEL	1
 -#define LTQ_ETOP_RX_CHANNEL	6
 -#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
 -#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+-
++#define ETOP_CFG_MII0		0x01
++
 +#define LTQ_GBIT_MDIO_CTL	0xCC
 +#define LTQ_GBIT_MDIO_DATA	0xd0
 +#define LTQ_GBIT_GCTL0		0x68
@@ -70,7 +74,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
 +#define MDIO_XR9_REG_OFFSET	0
 +#define MDIO_XR9_ADDR_OFFSET	5
 +#define MDIO_XR9_WR_OFFSET	16
- 
++
 +#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
 +			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
 +
@@ -138,7 +142,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	if (!ch->skb[ch->dma.desc])
  		return -ENOMEM;
  	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
+@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
  	spin_unlock_irqrestore(&priv->lock, flags);
  
  	skb_put(skb, len);
@@ -150,7 +154,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  }
  
  static int
-@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
  {
  	struct ltq_etop_chan *ch = container_of(napi,
  				struct ltq_etop_chan, napi);
@@ -161,7 +165,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  	while ((rx < budget) && !complete) {
  		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
  	}
  	if (complete || !rx) {
  		napi_complete(&ch->napi);
@@ -171,7 +175,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	}
  	return rx;
  }
-@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
  		container_of(napi, struct ltq_etop_chan, napi);
  	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
  	struct netdev_queue *txq =
@@ -187,7 +191,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  		dev_kfree_skb_any(ch->skb[ch->tx_free]);
  		ch->skb[ch->tx_free] = NULL;
  		memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
  	if (netif_tx_queue_stopped(txq))
  		netif_tx_start_queue(txq);
  	napi_complete(&ch->napi);
@@ -211,7 +215,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	return IRQ_HANDLED;
  }
  
-@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device
+@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
  	ltq_dma_free(&ch->dma);
  	if (ch->dma.irq)
  		free_irq(ch->dma.irq, priv);
@@ -276,17 +280,17 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	struct ltq_etop_priv *priv = netdev_priv(dev);
 -	int i;
 +	int mii_mode = priv->mii_mode;
- 
--	ltq_pmu_enable(PMU_PPE);
++
 +	clk_enable(priv->clk_ppe);
  
--	switch (priv->pldata->mii_mode) {
+-	ltq_pmu_enable(PMU_PPE);
 +	if (of_machine_is_compatible("lantiq,ar9")) {
 +		ltq_etop_gbit_init(dev);
 +		/* force the etops link to the gbit to MII */
 +		mii_mode = PHY_INTERFACE_MODE_MII;
 +	}
-+
+ 
+-	switch (priv->pldata->mii_mode) {
 +	switch (mii_mode) {
  	case PHY_INTERFACE_MODE_RMII:
  		ltq_etop_w32_mask(ETOP_MII_MASK,
@@ -382,7 +386,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  }
  
  static void
-@@ -312,7 +445,10 @@ ltq_etop_get_settings(struct net_device
+@@ -312,7 +445,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
  
@@ -394,7 +398,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  }
  
  static int
-@@ -320,7 +456,10 @@ ltq_etop_set_settings(struct net_device
+@@ -320,7 +456,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
  
@@ -406,7 +410,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  }
  
  static int
-@@ -328,7 +467,10 @@ ltq_etop_nway_reset(struct net_device *d
+@@ -328,7 +467,10 @@ ltq_etop_nway_reset(struct net_device *dev)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
  
@@ -418,7 +422,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  }
  
  static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -339,6 +481,39 @@ static const struct ethtool_ops ltq_etop
+@@ -339,6 +481,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
  };
  
  static int
@@ -458,11 +462,18 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
  {
  	u32 val = MDIO_REQUEST |
-@@ -379,14 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -379,14 +554,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
  {
  	struct ltq_etop_priv *priv = netdev_priv(dev);
  	struct phy_device *phydev = NULL;
 -	int phy_addr;
+-
+-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+-		if (priv->mii_bus->phy_map[phy_addr]) {
+-			phydev = priv->mii_bus->phy_map[phy_addr];
+-			break;
+-		}
+-	}
 +	u32 phy_supported =  (SUPPORTED_10baseT_Half
 +			| SUPPORTED_10baseT_Full
 +			| SUPPORTED_100baseT_Half
@@ -470,13 +481,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
 +			| SUPPORTED_Autoneg
 +			| SUPPORTED_MII
 +			| SUPPORTED_TP);
- 
--	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
--		if (priv->mii_bus->phy_map[phy_addr]) {
--			phydev = priv->mii_bus->phy_map[phy_addr];
--			break;
--		}
--	}
++
 +	if (of_machine_is_compatible("lantiq,ase"))
 +		phydev = priv->mii_bus->phy_map[8];
 +	else
@@ -484,7 +489,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  	if (!phydev) {
  		netdev_err(dev, "no PHY found\n");
-@@ -394,21 +573,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -394,21 +573,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
  	}
  
  	phydev = phy_connect(dev, dev_name(&phydev->dev),
@@ -511,7 +516,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	phydev->advertising = phydev->supported;
  	priv->phydev = phydev;
  	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-@@ -433,8 +609,13 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -433,8 +609,13 @@ ltq_etop_mdio_init(struct net_device *dev)
  	}
  
  	priv->mii_bus->priv = dev;
@@ -567,12 +572,6 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
 -	phy_stop(priv->phydev);
 -	for (i = 0; i < MAX_DMA_CHAN; i++) {
 -		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		if (!IS_RX(i) && !IS_TX(i))
--			continue;
--		napi_disable(&ch->napi);
--		ltq_dma_close(&ch->dma);
--	}
 +	if (priv->phydev)
 +		phy_stop(priv->phydev);
 +	napi_disable(&priv->txch.napi);
@@ -582,11 +581,16 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
 +	ltq_dma_close(&priv->txch.dma);
 +	ltq_dma_close(&priv->rxch.dma);
 +	spin_unlock_irqrestore(&priv->lock, flags);
-+
+ 
+-		if (!IS_RX(i) && !IS_TX(i))
+-			continue;
+-		napi_disable(&ch->napi);
+-		ltq_dma_close(&ch->dma);
+-	}
  	return 0;
  }
  
-@@ -523,16 +707,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -523,16 +707,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
  	int queue = skb_get_queue_mapping(skb);
  	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
  	struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -608,7 +612,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  		netdev_err(dev, "tx ring full\n");
  		netif_tx_stop_queue(txq);
  		return NETDEV_TX_BUSY;
-@@ -540,7 +724,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -540,7 +724,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
  
  	/* dma needs to start on a 16 byte aligned address */
  	byte_offset = CPHYSADDR(skb->data) % 16;
@@ -617,7 +621,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  	dev->trans_start = jiffies;
  
-@@ -550,11 +734,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -550,11 +734,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
  	wmb();
  	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
  		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@@ -678,7 +682,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	return 0;
  
  err_netdev:
-@@ -680,6 +863,9 @@ ltq_etop_tx_timeout(struct net_device *d
+@@ -680,6 +863,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
  	err = ltq_etop_hw_init(dev);
  	if (err)
  		goto err_hw;
@@ -688,7 +692,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  	dev->trans_start = jiffies;
  	netif_wake_queue(dev);
  	return;
-@@ -703,14 +889,18 @@ static const struct net_device_ops ltq_e
+@@ -703,14 +889,18 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
  	.ndo_tx_timeout = ltq_etop_tx_timeout,
  };
  
@@ -711,7 +715,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	if (!res) {
-@@ -736,30 +926,60 @@ ltq_etop_probe(struct platform_device *p
+@@ -736,30 +926,58 @@ ltq_etop_probe(struct platform_device *pdev)
  		goto err_out;
  	}
  
@@ -748,9 +752,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
 +	priv->tx_irq = irqres[0].start;
 +	priv->rx_irq = irqres[1].start;
 +	priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
-+	priv->mac = ltq_get_eth_mac();
-+	if (!priv->mac)
-+		priv->mac = of_get_mac_address(pdev->dev.of_node);
++	of_get_mac_address_mtd(pdev->dev.of_node, priv->mac);
 +
 +	priv->clk_ppe = clk_get(&pdev->dev, NULL);
 +	if (IS_ERR(priv->clk_ppe))
@@ -787,7 +789,7 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  	err = register_netdev(dev);
  	if (err)
-@@ -788,32 +1008,23 @@ ltq_etop_remove(struct platform_device *
+@@ -788,32 +1006,23 @@ ltq_etop_remove(struct platform_device *pdev)
  	return 0;
  }
  
@@ -829,3 +831,6 @@ Subject: [PATCH 10/22] NET: MIPS: lantiq: update etop driver for devicetree
  
  MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
  MODULE_DESCRIPTION("Lantiq SoC ETOP");
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0022-NET-multi-phy-support.patch b/target/linux/lantiq/patches-3.10/0022-NET-multi-phy-support.patch
new file mode 100644
index 0000000..604a247
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0022-NET-multi-phy-support.patch
@@ -0,0 +1,61 @@
+From 88837a59f8a84ced5ac6d64a5096fe129545d8e5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 11 May 2013 23:40:19 +0200
+Subject: [PATCH 22/34] NET: multi phy support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/phy/phy.c |    9 ++++++---
+ include/linux/phy.h   |    2 +-
+ 2 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 38f0b31..ad64a75 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -773,7 +773,8 @@ void phy_state_machine(struct work_struct *work)
+ 			 * negotiation for now */
+ 			if (!phydev->link) {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 				break;
+ 			}
+@@ -843,7 +844,8 @@ void phy_state_machine(struct work_struct *work)
+ 				netif_carrier_on(phydev->attached_dev);
+ 			} else {
+ 				phydev->state = PHY_NOLINK;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 			}
+ 
+ 			phydev->adjust_link(phydev->attached_dev);
+@@ -855,7 +857,8 @@ void phy_state_machine(struct work_struct *work)
+ 		case PHY_HALTED:
+ 			if (phydev->link) {
+ 				phydev->link = 0;
+-				netif_carrier_off(phydev->attached_dev);
++				if (!phydev->no_auto_carrier_off)
++					netif_carrier_off(phydev->attached_dev);
+ 				phydev->adjust_link(phydev->attached_dev);
+ 			}
+ 			break;
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 9e11039..9a8ca78 100644
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -298,7 +298,7 @@ struct phy_device {
+ 
+ 	struct phy_c45_device_ids c45_ids;
+ 	bool is_c45;
+-
++	bool no_auto_carrier_off;
+ 	enum phy_state state;
+ 
+ 	u32 dev_flags;
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0023-NET-add-of_get_mac_address_mtd.patch b/target/linux/lantiq/patches-3.10/0023-NET-add-of_get_mac_address_mtd.patch
new file mode 100644
index 0000000..b19cbad
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0023-NET-add-of_get_mac_address_mtd.patch
@@ -0,0 +1,83 @@
+From d79fd47eb2d2d865a433db0b8d0e4b48cac17846 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:26:15 +0200
+Subject: [PATCH 23/34] NET: add of_get_mac_address_mtd()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h |    1 +
+ 2 files changed, 38 insertions(+)
+
+diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
+index ffab033..15f4a71 100644
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -10,6 +10,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+ 
+ /**
+  * It maps 'enum phy_interface_t' found in include/linux/phy.h
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
+ 	return NULL;
+ }
+ EXPORT_SYMBOL(of_get_mac_address);
++
++int of_get_mac_address_mtd(struct device_node *np, void *mac)
++{
++	struct device_node *mtd_np = NULL;
++	size_t retlen;
++	int size, ret;
++	struct mtd_info *mtd;
++	const char *part;
++	const __be32 *list;
++	phandle phandle;
++
++	list = of_get_property(np, "mtd-mac-address", &size);
++	if (!list || (size != (2 * sizeof(*list))))
++		return -ENOENT;
++
++	phandle = be32_to_cpup(list++);
++	if (phandle)
++		mtd_np = of_find_node_by_phandle(phandle);
++
++	if (!mtd_np)
++		return -ENOENT;
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	mtd = get_mtd_device_nm(part);
++	if (IS_ERR(mtd))
++		return PTR_ERR(mtd);
++
++	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
++	put_mtd_device(mtd);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
+diff --git a/include/linux/of_net.h b/include/linux/of_net.h
+index 61bf53b..6e6b4a9 100644
+--- a/include/linux/of_net.h
++++ b/include/linux/of_net.h
+@@ -11,6 +11,7 @@
+ #include <linux/of.h>
+ extern const int of_get_phy_mode(struct device_node *np);
+ extern const void *of_get_mac_address(struct device_node *np);
++extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
+ #else
+ static inline const int of_get_phy_mode(struct device_node *np)
+ {
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch b/target/linux/lantiq/patches-3.10/0024-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
index 00ad437..cadccd4 100644
--- a/target/linux/lantiq/patches-3.8/0021-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.10/0024-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
@@ -1,24 +1,27 @@
-From ff3d0dd789882ad552a5224d34e5db426e1c45fe Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 23 Jun 2012 15:32:33 +0200
-Subject: [PATCH 21/40] GPIO: MIPS: add gpio driver for falcon SoC
+From 4cc24d8a9ac15aceadf2449473494f947c1ead72 Mon Sep 17 00:00:00 2001
+From: Thomas Langer <thomas.langer@lantiq.com>
+Date: Thu, 8 Aug 2013 16:19:15 +0200
+Subject: [PATCH 24/34] GPIO: MIPS: lantiq: add gpio driver for falcon SoC
 
 Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
 up to 32 pads. The GPIO blocks have a per pin IRQs.
 
-Signed-off-by: John Crispin <blogic@openwrt.org>
 Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Cc: linux-kernel@vger.kernel.org
+Acked-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: linux-gpio@vger.kernel.org
 ---
  drivers/gpio/Kconfig       |    5 +
  drivers/gpio/Makefile      |    1 +
- drivers/gpio/gpio-falcon.c |  349 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 355 insertions(+)
+ drivers/gpio/gpio-falcon.c |  348 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 354 insertions(+)
  create mode 100644 drivers/gpio/gpio-falcon.c
 
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 573c449..59b8764 100644
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -133,6 +133,11 @@ config GPIO_EP93XX
+@@ -135,6 +135,11 @@ config GPIO_EP93XX
  	depends on ARCH_EP93XX
  	select GPIO_GENERIC
  
@@ -30,19 +33,24 @@ Cc: linux-kernel@vger.kernel.org
  config GPIO_MM_LANTIQ
  	bool "Lantiq Memory mapped GPIOs"
  	depends on LANTIQ && SOC_XWAY
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 0cb2d65..542960d 100644
 --- a/drivers/gpio/Makefile
 +++ b/drivers/gpio/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055
+@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
  obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
  obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
  obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
 +obj-$(CONFIG_GPIO_FALCON)	+= gpio-falcon.o
  obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
+ obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
  obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
- obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
+diff --git a/drivers/gpio/gpio-falcon.c b/drivers/gpio/gpio-falcon.c
+new file mode 100644
+index 0000000..ae3bdfb
 --- /dev/null
 +++ b/drivers/gpio/gpio-falcon.c
-@@ -0,0 +1,349 @@
+@@ -0,0 +1,348 @@
 +/*
 + *  This program is free software; you can redistribute it and/or modify it
 + *  under the terms of the GNU General Public License version 2 as published
@@ -103,7 +111,7 @@ Cc: linux-kernel@vger.kernel.org
 +#define port_w32_mask(p, clear, set, reg) \
 +		port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg)
 +
-+#define MAX_PORTS		5
++#define MAX_BANKS		5
 +#define PINS_PER_PORT		32
 +
 +struct falcon_gpio_port {
@@ -115,6 +123,8 @@ Cc: linux-kernel@vger.kernel.org
 +	char name[6];
 +};
 +
++static struct irq_chip falcon_gpio_irq_chip;
++
 +static int falcon_gpio_direction_input(struct gpio_chip *chip,
 +					unsigned int offset)
 +{
@@ -197,7 +207,6 @@ Cc: linux-kernel@vger.kernel.org
 +	port_w32(itop(d), 1 << offset, GPIO_IRNCR);
 +}
 +
-+static struct irq_chip falcon_gpio_irq_chip;
 +static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
 +{
 +	unsigned int offset = d->irq - itop(d)->irq_base;
@@ -293,7 +302,7 @@ Cc: linux-kernel@vger.kernel.org
 +	struct resource *gpiores, irqres;
 +	int ret, size;
 +
-+	if (!bank || *bank >= MAX_PORTS)
++	if (!bank || *bank >= MAX_BANKS)
 +		return -ENODEV;
 +
 +	size = pinctrl_falcon_get_range_size(*bank);
@@ -302,10 +311,6 @@ Cc: linux-kernel@vger.kernel.org
 +		return size;
 +	}
 +
-+	gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!gpiores)
-+		return -ENODEV;
-+
 +	gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range),
 +				GFP_KERNEL);
 +	if (!gpio_range)
@@ -315,6 +320,7 @@ Cc: linux-kernel@vger.kernel.org
 +				GFP_KERNEL);
 +	if (!gpio_port)
 +		return -ENOMEM;
++
 +	snprintf(gpio_port->name, 6, "gpio%d", *bank);
 +	gpio_port->gpio_chip.label = gpio_port->name;
 +	gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
@@ -323,22 +329,19 @@ Cc: linux-kernel@vger.kernel.org
 +	gpio_port->gpio_chip.set = falcon_gpio_set;
 +	gpio_port->gpio_chip.request = falcon_gpio_request;
 +	gpio_port->gpio_chip.free = falcon_gpio_free;
-+	gpio_port->gpio_chip.base = -1;
++	gpio_port->gpio_chip.base = *bank * PINS_PER_PORT;
 +	gpio_port->gpio_chip.ngpio = size;
 +	gpio_port->gpio_chip.dev = &pdev->dev;
 +
++	gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 +	gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores);
-+	if (!gpio_port->port) {
-+		dev_err(&pdev->dev, "Could not map io ranges\n");
-+		return -ENOMEM;
-+	}
++	if (IS_ERR(gpio_port->port))
++		return PTR_ERR(gpio_port->port);
 +
-+	gpio_port->clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(gpio_port->clk)) {
-+		dev_err(&pdev->dev, "Could not get clock\n");
++	gpio_port->clk = devm_clk_get(&pdev->dev, NULL);
++	if (IS_ERR(gpio_port->clk))
 +		return PTR_ERR(gpio_port->clk);
-+	}
-+	clk_enable(gpio_port->clk);
++	clk_activate(gpio_port->clk);
 +
 +	if (of_irq_to_resource_table(node, &irqres, 1) == 1) {
 +		gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank);
@@ -352,21 +355,25 @@ Cc: linux-kernel@vger.kernel.org
 +	}
 +
 +	ret = gpiochip_add(&gpio_port->gpio_chip);
-+	if (!ret)
-+		platform_set_drvdata(pdev, gpio_port);
++	if (ret)
++		return ret;
++
++	platform_set_drvdata(pdev, gpio_port);
 +
 +	gpio_range->name = "FALCON GPIO";
 +	gpio_range->id = *bank;
 +	gpio_range->base = gpio_port->gpio_chip.base;
++	gpio_range->pin_base = gpio_port->gpio_chip.base;
 +	gpio_range->npins = gpio_port->gpio_chip.ngpio;
 +	gpio_range->gc = &gpio_port->gpio_chip;
++
 +	pinctrl_falcon_add_gpio_range(gpio_range);
 +
-+	return ret;
++	return 0;
 +}
 +
 +static const struct of_device_id falcon_gpio_match[] = {
-+	{ .compatible = "lantiq,gpio-falcon" },
++	{ .compatible = "lantiq,falcon-gpio" },
 +	{},
 +};
 +MODULE_DEVICE_TABLE(of, falcon_gpio_match);
@@ -392,3 +399,6 @@ Cc: linux-kernel@vger.kernel.org
 +}
 +
 +subsys_initcall(falcon_gpio_init);
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0025-GPIO-add-gpio_export_with_name.patch b/target/linux/lantiq/patches-3.10/0025-GPIO-add-gpio_export_with_name.patch
new file mode 100644
index 0000000..f3fbd54
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0025-GPIO-add-gpio_export_with_name.patch
@@ -0,0 +1,338 @@
+From 4bf583c17735a759064bc6177718f05fd990a7ab Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 23 Jun 2013 00:16:22 +0200
+Subject: [PATCH 25/34] GPIO: add gpio_export_with_name
+
+http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/133856.html
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ Documentation/devicetree/bindings/gpio/gpio.txt |   60 ++++++++++++++++++++
+ drivers/gpio/gpiolib-of.c                       |   68 +++++++++++++++++++++++
+ drivers/gpio/gpiolib.c                          |   24 +++++---
+ include/asm-generic/gpio.h                      |    6 +-
+ include/linux/gpio.h                            |   26 ++++++++-
+ 5 files changed, 172 insertions(+), 12 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
+index d933af3..c264748 100644
+--- a/Documentation/devicetree/bindings/gpio/gpio.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio.txt
+@@ -112,3 +112,63 @@ where,
+ 
+ The pinctrl node must have "#gpio-range-cells" property to show number of
+ arguments to pass with phandle from gpio controllers node.
++
++3) gpio-export
++--------------
++
++gpio-export will allow you to automatically export gpio
++
++required properties:
++- compatible: Should be "gpio-export"
++
++in each child node will reprensent a gpio or if no name is specified
++a list of gpio to export
++
++required properties:
++- gpios: gpio to export
++
++optional properties:
++ - gpio-export,name: export name
++ - gpio-export,output: to set the as output with default value
++ 		       if no present gpio as input
++ - pio-export,direction_may_change: boolean to allow the direction to be controllable
++
++Example:
++
++
++gpio_export {
++	compatible = "gpio-export";
++	#size-cells = <0>;
++
++	in {
++		gpio-export,name = "in";
++		gpios = <&pioC 20 0>;
++	};
++
++	out {
++		gpio-export,name = "out";
++		gpio-export,output = <1>;
++		gpio-export,direction_may_change;
++		gpios = <&pioC 21 0>;
++	};
++
++	in_out {
++		gpio-export,name = "in_out";
++		gpio-export,direction_may_change;
++		gpios = <&pioC 21 0>;
++	};
++
++	gpios_in {
++		gpios = <&pioB 0 0
++			 &pioB 3 0
++			 &pioC 4 0>;
++		gpio-export,direction_may_change;
++	};
++
++	gpios_out {
++		gpios = <&pioB 1 0
++			 &pioB 2 0
++			 &pioC 3 0>;
++		gpio-export,output = <1>;
++	};
++};
+diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
+index 665f953..15ec5e5 100644
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -21,6 +21,8 @@
+ #include <linux/of_gpio.h>
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+ 
+ /* Private data structure for of_gpiochip_find_and_xlate */
+ struct gg_data {
+@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+ 	if (chip->of_node)
+ 		of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++	{ .compatible = "gpio-export" },
++	{ /* sentinel */ }
++};
++
++static int __init of_gpio_export_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct device_node *cnp;
++	u32 val;
++	int nb = 0;
++
++	for_each_child_of_node(np, cnp) {
++		const char *name = NULL;
++		int gpio;
++		bool dmc;
++		int max_gpio = 1;
++		int i;
++
++		of_property_read_string(cnp, "gpio-export,name", &name);
++
++		if (!name)
++			max_gpio = of_gpio_count(cnp);
++
++		for (i = 0; i < max_gpio; i++) {
++			unsigned flags = 0;
++			enum of_gpio_flags of_flags;
++
++			gpio = of_get_gpio_flags(cnp, i, &of_flags);
++
++			if (of_flags == OF_GPIO_ACTIVE_LOW)
++				flags |= GPIOF_ACTIVE_LOW;
++
++			if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++				flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++			else
++				flags |= GPIOF_IN;
++
++			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++				continue;
++
++			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++			gpio_export_with_name(gpio, dmc, name);
++			nb++;
++		}
++	}
++
++	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++	return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++	.driver		= {
++		.name		= "gpio-export",
++		.owner	= THIS_MODULE,
++		.of_match_table	= of_match_ptr(gpio_export_ids),
++	},
++};
++
++static int __init of_gpio_export_init(void)
++{
++	return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
++}
++device_initcall(of_gpio_export_init);
+diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
+index c2534d6..8697c82 100644
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct gpio_desc *desc);
+ static void gpiod_set_value(struct gpio_desc *desc, int value);
+ static int gpiod_cansleep(const struct gpio_desc *desc);
+ static int gpiod_to_irq(const struct gpio_desc *desc);
+-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
++static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ static int gpiod_export_link(struct device *dev, const char *name,
+ 			     struct gpio_desc *desc);
+ static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+@@ -674,7 +674,7 @@ static ssize_t export_store(struct class *class,
+ 			status = -ENODEV;
+ 		goto done;
+ 	}
+-	status = gpiod_export(desc, true);
++	status = gpiod_export(desc, true, NULL);
+ 	if (status < 0)
+ 		gpiod_free(desc);
+ 	else
+@@ -736,9 +736,10 @@ static struct class gpio_class = {
+ 
+ 
+ /**
+- * gpio_export - export a GPIO through sysfs
++ * gpio_export_with_name - export a GPIO through sysfs
+  * @gpio: gpio to make available, already requested
+  * @direction_may_change: true if userspace may change gpio direction
++ * @name: gpio name
+  * Context: arch_initcall or later
+  *
+  * When drivers want to make a GPIO accessible to userspace after they
+@@ -750,7 +751,7 @@ static struct class gpio_class = {
+  *
+  * Returns zero on success, else an error.
+  */
+-static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ 	unsigned long		flags;
+ 	int			status;
+@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+ 		goto fail_unlock;
+ 	}
+ 
++	if (name)
++		ioname = name;
+ 	if (!desc->chip->direction_input || !desc->chip->direction_output)
+ 		direction_may_change = false;
+ 	spin_unlock_irqrestore(&gpio_lock, flags);
+@@ -829,11 +832,11 @@ fail_unlock:
+ 	return status;
+ }
+ 
+-int gpio_export(unsigned gpio, bool direction_may_change)
++int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
+ {
+-	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
++	return gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
+ }
+-EXPORT_SYMBOL_GPL(gpio_export);
++EXPORT_SYMBOL_GPL(gpio_export_with_name);
+ 
+ static int match_export(struct device *dev, const void *data)
+ {
+@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(struct gpio_chip *chip)
+ }
+ 
+ static inline int gpiod_export(struct gpio_desc *desc,
+-			       bool direction_may_change)
++			       bool direction_may_change, const char *name)
+ {
+ 	return -ENOSYS;
+ }
+@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+ 	if (flags & GPIOF_OPEN_SOURCE)
+ 		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+ 
++	if (flags & GPIOF_ACTIVE_LOW)
++		set_bit(FLAG_ACTIVE_LOW, &gpio_desc[gpio].flags);
++
+ 	if (flags & GPIOF_DIR_IN)
+ 		err = gpiod_direction_input(desc);
+ 	else
+@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+ 		goto free_gpio;
+ 
+ 	if (flags & GPIOF_EXPORT) {
+-		err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE);
++		err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE, NULL);
+ 		if (err)
+ 			goto free_gpio;
+ 	}
+diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
+index bde6469..3290572 100644
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
+  * A sysfs interface can be exported by individual drivers if they want,
+  * but more typically is configured entirely from userspace.
+  */
+-extern int gpio_export(unsigned gpio, bool direction_may_change);
++extern int gpio_export_with_name(unsigned gpio, bool direction_may_change,
++			const char *name);
+ extern int gpio_export_link(struct device *dev, const char *name,
+ 			unsigned gpio);
+ extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
+@@ -284,7 +285,8 @@ struct device;
+ 
+ /* sysfs support is only available with gpiolib, where it's optional */
+ 
+-static inline int gpio_export(unsigned gpio, bool direction_may_change)
++static inline int gpio_export_with_name(unsigned gpio,
++	bool direction_may_change, const char *name)
+ {
+ 	return -ENOSYS;
+ }
+diff --git a/include/linux/gpio.h b/include/linux/gpio.h
+index 552e3f4..07bbbcc7 100644
+--- a/include/linux/gpio.h
++++ b/include/linux/gpio.h
+@@ -27,6 +27,9 @@
+ #define GPIOF_EXPORT_DIR_FIXED	(GPIOF_EXPORT)
+ #define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
+ 
++#define GPIOF_ACTIVE_LOW	(1 << 6)
++
++
+ /**
+  * struct gpio - a structure describing a GPIO with configuration
+  * @gpio:	the GPIO number
+@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+ 	WARN_ON(1);
+ }
+ 
+-static inline int gpio_export(unsigned gpio, bool direction_may_change)
++static inline int gpio_export_with_name(unsigned gpio,
++	bool direction_may_change, const char *name)
+ {
+ 	/* GPIO can never have been requested or set as {in,out}put */
+ 	WARN_ON(1);
+@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
+ 			  unsigned long flags, const char *label);
+ void devm_gpio_free(struct device *dev, unsigned int gpio);
+ 
++/**
++ * gpio_export - export a GPIO through sysfs
++ * @gpio: gpio to make available, already requested
++ * @direction_may_change: true if userspace may change gpio direction
++ * Context: arch_initcall or later
++ *
++ * When drivers want to make a GPIO accessible to userspace after they
++ * have requested it -- perhaps while debugging, or as part of their
++ * public interface -- they may use this routine.  If the GPIO can
++ * change direction (some can't) and the caller allows it, userspace
++ * will see "direction" sysfs attribute which may be used to change
++ * the gpio's direction.  A "value" attribute will always be provided.
++ *
++ * Returns zero on success, else an error.
++ */
++static inline int gpio_export(unsigned gpio,bool direction_may_change)
++{
++	return gpio_export_with_name(gpio, direction_may_change, NULL);
++}
++
+ #endif /* __LINUX_GPIO_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0022-PINCTRL-add-gpio_irq-support.patch b/target/linux/lantiq/patches-3.10/0026-pinctrl-lantiq-fix-up-pinmux.patch
index fd18e62..e68dc7e 100644
--- a/target/linux/lantiq/patches-3.9/0022-PINCTRL-add-gpio_irq-support.patch
+++ b/target/linux/lantiq/patches-3.10/0026-pinctrl-lantiq-fix-up-pinmux.patch
@@ -1,15 +1,20 @@
-From ea78e25b769740a801e259f4f6cb93fa92faa244 Mon Sep 17 00:00:00 2001
+From f8b5108547119cd650fe5fcc90f488d250a3305d Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
-Date: Sat, 29 Jun 2013 19:32:08 +0200
-Subject: [PATCH 22/22] PINCTRL: add gpio_irq support
+Date: Fri, 9 Aug 2013 20:38:15 +0200
+Subject: [PATCH 26/34] pinctrl/lantiq: fix up pinmux
 
+We found out how to set the gphy led pinmuxing.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++++++++++++++--
  1 file changed, 26 insertions(+), 2 deletions(-)
 
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index e92132c..e40b2e6 100644
 --- a/drivers/pinctrl/pinctrl-xway.c
 +++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -564,10 +564,9 @@ static struct pinctrl_desc xway_pctrl_de
+@@ -564,10 +564,9 @@ static struct pinctrl_desc xway_pctrl_desc = {
  	.confops	= &xway_pinconf_ops,
  };
  
@@ -21,7 +26,7 @@ Subject: [PATCH 22/22] PINCTRL: add gpio_irq support
  	int port = PORT(pin);
  	u32 alt1_reg = GPIO_ALT1(pin);
  
-@@ -587,6 +586,14 @@ static inline int xway_mux_apply(struct
+@@ -587,6 +586,14 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
  	return 0;
  }
  
@@ -36,7 +41,7 @@ Subject: [PATCH 22/22] PINCTRL: add gpio_irq support
  static const struct ltq_cfg_param xway_cfg_params[] = {
  	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
  	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -631,6 +638,10 @@ static int xway_gpio_dir_out(struct gpio
+@@ -631,6 +638,10 @@ static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
  {
  	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
  
@@ -47,7 +52,7 @@ Subject: [PATCH 22/22] PINCTRL: add gpio_irq support
  	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
  	xway_gpio_set(chip, pin, val);
  
-@@ -651,6 +662,18 @@ static void xway_gpio_free(struct gpio_c
+@@ -651,6 +662,18 @@ static void xway_gpio_free(struct gpio_chip *chip, unsigned offset)
  	pinctrl_free_gpio(gpio);
  }
  
@@ -74,3 +79,6 @@ Subject: [PATCH 22/22] PINCTRL: add gpio_irq support
  	.base = -1,
  };
  
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0043-PINCTRL-lantiq-add_gphy_led.patch b/target/linux/lantiq/patches-3.10/0027-pinctrl-lantiq-add-missing-gphy-led-setup.patch
index 1af3d47..27cae36 100644
--- a/target/linux/lantiq/patches-3.8/0043-PINCTRL-lantiq-add_gphy_led.patch
+++ b/target/linux/lantiq/patches-3.10/0027-pinctrl-lantiq-add-missing-gphy-led-setup.patch
@@ -1,8 +1,20 @@
-Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
-===================================================================
---- linux-3.8.13.orig/drivers/pinctrl/pinctrl-xway.c	2013-07-27 15:05:47.693196681 +0200
-+++ linux-3.8.13/drivers/pinctrl/pinctrl-xway.c	2013-07-29 14:43:05.237674357 +0200
-@@ -101,6 +101,7 @@
+From 5164a36bb033e805c40da76558ceddc82741989b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:38:15 +0200
+Subject: [PATCH 27/34] pinctrl/lantiq: add missing gphy led setup
+
+We found out how to set the gphy led pinmuxing.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-xway.c |   30 ++++++++++++++++++++++++------
+ 1 file changed, 24 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
+index e40b2e6..b159fd5 100644
+--- a/drivers/pinctrl/pinctrl-xway.c
++++ b/drivers/pinctrl/pinctrl-xway.c
+@@ -102,6 +102,7 @@ enum xway_mux {
  	XWAY_MUX_EPHY,
  	XWAY_MUX_DFE,
  	XWAY_MUX_SDIO,
@@ -10,7 +22,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  	XWAY_MUX_NONE = 0xffff,
  };
  
-@@ -108,12 +109,12 @@
+@@ -109,12 +110,12 @@ static const struct ltq_mfp_pin xway_mfp[] = {
  	/*       pin    f0	f1	f2	f3   */
  	MFP_XWAY(GPIO0, GPIO,	EXIN,	NONE,	TDM),
  	MFP_XWAY(GPIO1, GPIO,	EXIN,	NONE,	NONE),
@@ -26,7 +38,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
  	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	EXIN),
  	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	NONE),
-@@ -150,10 +151,10 @@
+@@ -151,10 +152,10 @@ static const struct ltq_mfp_pin xway_mfp[] = {
  	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
  	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
  	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
@@ -40,7 +52,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
  	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
  	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
-@@ -207,6 +208,13 @@
+@@ -208,6 +209,13 @@ static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6};
  static const unsigned pins_nmi[] = {GPIO8};
  static const unsigned pins_mdio[] = {GPIO42, GPIO43};
  
@@ -54,7 +66,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  static const unsigned pins_ebu_a24[] = {GPIO13};
  static const unsigned pins_ebu_clk[] = {GPIO21};
  static const unsigned pins_ebu_cs1[] = {GPIO23};
-@@ -321,6 +329,12 @@
+@@ -322,6 +330,12 @@ static const struct ltq_pin_group xway_grps[] = {
  	GRP_MUX("gnt4", PCI, pins_pci_gnt4),
  	GRP_MUX("req4", PCI, pins_pci_gnt4),
  	GRP_MUX("mdio", MDIO, pins_mdio),
@@ -67,7 +79,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  };
  
  static const struct ltq_pin_group ase_grps[] = {
-@@ -364,6 +378,9 @@
+@@ -365,6 +379,9 @@ static const char * const xway_nmi_grps[] = {"nmi"};
  
  /* ar9/vr9/gr9 */
  static const char * const xrx_mdio_grps[] = {"mdio"};
@@ -77,7 +89,7 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24",
  						"ebu a25", "ebu cs1",
  						"ebu wait", "ebu clk",
-@@ -413,6 +430,7 @@
+@@ -414,6 +431,7 @@ static const struct ltq_pmx_func xrx_funcs[] = {
  	{"pci",		ARRAY_AND_SIZE(xrx_pci_grps)},
  	{"ebu",		ARRAY_AND_SIZE(xrx_ebu_grps)},
  	{"mdio",	ARRAY_AND_SIZE(xrx_mdio_grps)},
@@ -85,4 +97,6 @@ Index: linux-3.8.13/drivers/pinctrl/pinctrl-xway.c
  };
  
  static const struct ltq_pmx_func ase_funcs[] = {
+-- 
+1.7.10.4
 
diff --git a/target/linux/lantiq/patches-3.10/0028-pinctrl-lantiq-add-missing-pin-definition-to-falcon-.patch b/target/linux/lantiq/patches-3.10/0028-pinctrl-lantiq-add-missing-pin-definition-to-falcon-.patch
new file mode 100644
index 0000000..5a56dae
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0028-pinctrl-lantiq-add-missing-pin-definition-to-falcon-.patch
@@ -0,0 +1,63 @@
+From 1036e254e670d7c8470aab812167e3d44ff993c1 Mon Sep 17 00:00:00 2001
+From: Thomas Langer <thomas.langer@lantiq.com>
+Date: Fri, 9 Aug 2013 20:38:14 +0200
+Subject: [PATCH 28/34] pinctrl/lantiq: add missing pin definition to falcon
+ pinctrl driver
+
+The pps pin definition is missing in the current code.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pinctrl/pinctrl-falcon.c |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
+index f9b2a1d..4e731f2 100644
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -75,6 +75,7 @@ enum falcon_mux {
+ 	FALCON_MUX_GPIO = 0,
+ 	FALCON_MUX_RST,
+ 	FALCON_MUX_NTR,
++	FALCON_MUX_PPS,
+ 	FALCON_MUX_MDIO,
+ 	FALCON_MUX_LED,
+ 	FALCON_MUX_SPI,
+@@ -114,7 +115,7 @@ static struct ltq_mfp_pin falcon_mfp[] = {
+ 	MFP_FALCON(GPIO2,	GPIO,	GPIO,   NONE,   NONE),
+ 	MFP_FALCON(GPIO3,	GPIO,	GPIO,   NONE,   NONE),
+ 	MFP_FALCON(GPIO4,	NTR,	GPIO,   NONE,   NONE),
+-	MFP_FALCON(GPIO5,	NTR,	GPIO,   NONE,   NONE),
++	MFP_FALCON(GPIO5,	NTR,	GPIO,   PPS,    NONE),
+ 	MFP_FALCON(GPIO6,	RST,	GPIO,   NONE,   NONE),
+ 	MFP_FALCON(GPIO7,	MDIO,	GPIO,   NONE,   NONE),
+ 	MFP_FALCON(GPIO8,	MDIO,	GPIO,   NONE,   NONE),
+@@ -168,6 +169,7 @@ static struct ltq_mfp_pin falcon_mfp[] = {
+ static const unsigned pins_por[] = {GPIO0};
+ static const unsigned pins_ntr[] = {GPIO4};
+ static const unsigned pins_ntr8k[] = {GPIO5};
++static const unsigned pins_pps[] = {GPIO5};
+ static const unsigned pins_hrst[] = {GPIO6};
+ static const unsigned pins_mdio[] = {GPIO7, GPIO8};
+ static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
+@@ -186,6 +188,7 @@ static struct ltq_pin_group falcon_grps[] = {
+ 	GRP_MUX("por", RST, pins_por),
+ 	GRP_MUX("ntr", NTR, pins_ntr),
+ 	GRP_MUX("ntr8k", NTR, pins_ntr8k),
++	GRP_MUX("pps", PPS, pins_pps),
+ 	GRP_MUX("hrst", RST, pins_hrst),
+ 	GRP_MUX("mdio", MDIO, pins_mdio),
+ 	GRP_MUX("bootled", LED, pins_bled),
+@@ -201,7 +204,7 @@ static struct ltq_pin_group falcon_grps[] = {
+ };
+ 
+ static const char * const ltq_rst_grps[] = {"por", "hrst"};
+-static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"};
++static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k", "pps"};
+ static const char * const ltq_mdio_grps[] = {"mdio"};
+ static const char * const ltq_bled_grps[] = {"bootled"};
+ static const char * const ltq_asc_grps[] = {"asc0", "asc1"};
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0029-serial-MIPS-lantiq-add-clk_enable-call-to-driver.patch b/target/linux/lantiq/patches-3.10/0029-serial-MIPS-lantiq-add-clk_enable-call-to-driver.patch
new file mode 100644
index 0000000..283dc79
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0029-serial-MIPS-lantiq-add-clk_enable-call-to-driver.patch
@@ -0,0 +1,30 @@
+From 07cddcb5820db42cadcc4627aad7391816b63b34 Mon Sep 17 00:00:00 2001
+From: Thomas Langer <thomas.langer@lantiq.com>
+Date: Fri, 9 Aug 2013 20:54:30 +0200
+Subject: [PATCH 29/34] serial: MIPS: lantiq: add clk_enable() call to driver
+
+Enable the clock if one is present when setting up the console.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Acked-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/lantiq.c |    3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 15733da..93ac046 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -636,6 +636,9 @@ lqasc_console_setup(struct console *co, char *options)
+ 
+ 	port = &ltq_port->port;
+ 
++	if (!IS_ERR(ltq_port->clk))
++		clk_enable(ltq_port->clk);
++
+ 	port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ 
+ 	if (options)
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0030-serial-MIPS-lantiq-fix-clock-error-check.patch b/target/linux/lantiq/patches-3.10/0030-serial-MIPS-lantiq-fix-clock-error-check.patch
new file mode 100644
index 0000000..85ec238
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0030-serial-MIPS-lantiq-fix-clock-error-check.patch
@@ -0,0 +1,37 @@
+From 8c0b4b6a69cf3033eaa93cee7b3a6ca9ce43f572 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 20:54:31 +0200
+Subject: [PATCH 30/34] serial: MIPS: lantiq: fix clock error check
+
+The clock should be checked with the proper IS_ERR() api before using it.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/lantiq.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 93ac046..88d01e0 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -318,7 +318,7 @@ lqasc_startup(struct uart_port *port)
+ 	struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+ 	int retval;
+ 
+-	if (ltq_port->clk)
++	if (!IS_ERR(ltq_port->clk))
+ 		clk_enable(ltq_port->clk);
+ 	port->uartclk = clk_get_rate(ltq_port->fpiclk);
+ 
+@@ -386,7 +386,7 @@ lqasc_shutdown(struct uart_port *port)
+ 		port->membase + LTQ_ASC_RXFCON);
+ 	ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
+ 		port->membase + LTQ_ASC_TXFCON);
+-	if (ltq_port->clk)
++	if (!IS_ERR(ltq_port->clk))
+ 		clk_disable(ltq_port->clk);
+ }
+ 
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.9/0004-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index fc57b8b..24391e6 100644
--- a/target/linux/lantiq/patches-3.9/0004-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-3.10/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -1,7 +1,7 @@
-From 6a68cfb053a7c95ff36c7c2ce2a092aa98620422 Mon Sep 17 00:00:00 2001
+From eaec375aa840b776641f2619dbc974fa6ec44d80 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Sun, 20 May 2012 00:42:39 +0200
-Subject: [PATCH 04/22] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+Subject: [PATCH 31/34] I2C: MIPS: lantiq: add FALC-ON i2c bus master
 
 This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
 
@@ -16,6 +16,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  create mode 100644 drivers/i2c/busses/i2c-lantiq.c
  create mode 100644 drivers/i2c/busses/i2c-lantiq.h
 
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 631736e..0f0522b 100644
 --- a/drivers/i2c/busses/Kconfig
 +++ b/drivers/i2c/busses/Kconfig
 @@ -494,6 +494,16 @@ config I2C_IOP3XX
@@ -35,9 +37,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  config I2C_MPC
  	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
  	depends on PPC
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 8f4fc23..3273061 100644
 --- a/drivers/i2c/busses/Makefile
 +++ b/drivers/i2c/busses/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic
+@@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
  obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
  obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
  obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
@@ -45,6 +49,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
  obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
  obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
+diff --git a/drivers/i2c/busses/i2c-lantiq.c b/drivers/i2c/busses/i2c-lantiq.c
+new file mode 100644
+index 0000000..9a5f58b
 --- /dev/null
 +++ b/drivers/i2c/busses/i2c-lantiq.c
 @@ -0,0 +1,747 @@
@@ -795,6 +802,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +MODULE_ALIAS("platform:" DRV_NAME);
 +MODULE_LICENSE("GPL");
 +MODULE_VERSION(DRV_VERSION);
+diff --git a/drivers/i2c/busses/i2c-lantiq.h b/drivers/i2c/busses/i2c-lantiq.h
+new file mode 100644
+index 0000000..7a86b89
 --- /dev/null
 +++ b/drivers/i2c/busses/i2c-lantiq.h
 @@ -0,0 +1,234 @@
@@ -1032,3 +1042,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +
 +#endif /* I2C_LANTIQ_H */
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.10/0032-USB-fix-roothub-for-IFXHCD.patch
index 9645804..e182070 100644
--- a/target/linux/lantiq/patches-3.8/0023-USB-fix-roothub-for-IFXHCD.patch
+++ b/target/linux/lantiq/patches-3.10/0032-USB-fix-roothub-for-IFXHCD.patch
@@ -1,13 +1,15 @@
-From e6c3c0d86a581e0738e18e5a3369ded8527a3315 Mon Sep 17 00:00:00 2001
+From 4f861316af87a73fd8738df5436742f9425561b3 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 23/40] USB: fix roothub for IFXHCD
+Subject: [PATCH 32/34] USB: fix roothub for IFXHCD
 
 ---
  arch/mips/lantiq/Kconfig |    1 +
  drivers/usb/core/hub.c   |    2 +-
  2 files changed, 2 insertions(+), 1 deletion(-)
 
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index 1621b1d..4c9a241 100644
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
 @@ -3,6 +3,7 @@ if LANTIQ
@@ -18,9 +20,11 @@ Subject: [PATCH 23/40] USB: fix roothub for IFXHCD
  	default n
  
  choice
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index feef935..db4fb8e 100644
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -4007,7 +4007,7 @@ hub_port_init (struct usb_hub *hub, stru
+@@ -4009,7 +4009,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
  		udev->ttport = hdev->ttport;
  	} else if (udev->speed != USB_SPEED_HIGH
  			&& hdev->speed == USB_SPEED_HIGH) {
@@ -29,3 +33,6 @@ Subject: [PATCH 23/40] USB: fix roothub for IFXHCD
  			dev_err(&udev->dev, "parent hub has no TT\n");
  			retval = -EINVAL;
  			goto fail;
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.10/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
index 4dd94c9..137bf4d 100644
--- a/target/linux/lantiq/patches-3.8/0024-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-3.10/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -1,7 +1,7 @@
-From 60092075ded3e51036fd018ba6d9cc49e7079dcd Mon Sep 17 00:00:00 2001
+From bc11f9825bf54e38de195fde87d928f8a056826a Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 09:29:37 +0100
-Subject: [PATCH 24/40] SPI: MIPS: lantiq: adds spi-xway
+Subject: [PATCH 33/34] SPI: MIPS: lantiq: adds spi-xway
 
 This patch adds support for the SPI core found on several Lantiq SoCs.
 The Driver has been runtime tested in combination with m25p80 Flash Devices
@@ -16,9 +16,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  3 files changed, 986 insertions(+)
  create mode 100644 drivers/spi/spi-xway.c
 
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 92a9345..954c19f 100644
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -458,6 +458,14 @@ config SPI_NUC900
+@@ -487,6 +487,14 @@ config SPI_NUC900
  	help
  	  SPI driver for Nuvoton NUC900 series ARM SoCs
  
@@ -33,13 +35,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #
  # Add new SPI master controllers in alphabetical order above this line
  #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 33f9c09..0574edf 100644
 --- a/drivers/spi/Makefile
 +++ b/drivers/spi/Makefile
-@@ -69,3 +69,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-t
+@@ -74,3 +74,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
  obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
  obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
  obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 +obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+new file mode 100644
+index 0000000..61532e3
 --- /dev/null
 +++ b/drivers/spi/spi-xway.c
 @@ -0,0 +1,977 @@
@@ -1020,3 +1027,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
 +MODULE_LICENSE("GPL");
 +MODULE_ALIAS("platform:spi-xway");
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-3.10/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
new file mode 100644
index 0000000..b37496a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
@@ -0,0 +1,112 @@
+From d390147e2279a58b4476fdd1d6a0891af82a531e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Aug 2013 18:47:27 +0200
+Subject: [PATCH 34/34] reset: Fix compile when reset RESET_CONTROLLER is not
+ selected
+
+Drivers need to protect their reset api calls with #ifdef to avoid compile
+errors.
+
+This patch adds dummy wrappers in the same way that linux/of.h does it.
+
+Cc: linux-kernel@vger.kernel.org
+Cc: Philipp Zabel <p.zabel@pengutronix.de>
+Cc: Gabor Juhos <juhosg@openwrt.org>
+---
+ include/linux/reset-controller.h |   16 ++++++++++++++
+ include/linux/reset.h            |   43 ++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 59 insertions(+)
+
+diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
+index 2f61311..068f073 100644
+--- a/include/linux/reset-controller.h
++++ b/include/linux/reset-controller.h
+@@ -45,7 +45,23 @@ struct reset_controller_dev {
+ 	unsigned int nr_resets;
+ };
+ 
++#if defined(CONFIG_RESET_CONTROLLER)
++
+ int reset_controller_register(struct reset_controller_dev *rcdev);
+ void reset_controller_unregister(struct reset_controller_dev *rcdev);
+ 
++#else
++
++static inline int reset_controller_register(struct reset_controller_dev *rcdev)
++{
++	return -ENOSYS;
++}
++
++void reset_controller_unregister(struct reset_controller_dev *rcdev)
++{
++
++}
++
++#endif
++
+ #endif
+diff --git a/include/linux/reset.h b/include/linux/reset.h
+index 6082247..1b36c9e 100644
+--- a/include/linux/reset.h
++++ b/include/linux/reset.h
+@@ -1,9 +1,13 @@
+ #ifndef _LINUX_RESET_H_
+ #define _LINUX_RESET_H_
+ 
++#include <linux/err.h>
++
+ struct device;
+ struct reset_control;
+ 
++#if defined(CONFIG_RESET_CONTROLLER)
++
+ int reset_control_reset(struct reset_control *rstc);
+ int reset_control_assert(struct reset_control *rstc);
+ int reset_control_deassert(struct reset_control *rstc);
+@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
+ 
+ int device_reset(struct device *dev);
+ 
++#else /* CONFIG_RESET_CONTROLLER */
++
++static inline int reset_control_reset(struct reset_control *rstc)
++{
++	return -ENOSYS;
++}
++
++static inline int reset_control_assert(struct reset_control *rstc)
++{
++	return -ENOSYS;
++}
++
++static inline int reset_control_deassert(struct reset_control *rstc)
++{
++	return -ENOSYS;
++}
++
++static inline struct reset_control *reset_control_get(struct device *dev, const char *id)
++{
++	return ERR_PTR(-ENOSYS);
++}
++
++static inline void reset_control_put(struct reset_control *rstc)
++{
++
++}
++
++static inline struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
++{
++	return ERR_PTR(-ENOSYS);
++}
++
++static inline int device_reset(struct device *dev)
++{
++	return -ENOSYS;
++}
++
++#endif
++
+ #endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.10/0100-mtd-split.patch b/target/linux/lantiq/patches-3.10/0100-mtd-split.patch
new file mode 100644
index 0000000..12f6345
--- /dev/null
+++ b/target/linux/lantiq/patches-3.10/0100-mtd-split.patch
@@ -0,0 +1,218 @@
+Index: linux-3.10.12/arch/mips/lantiq/xway/Makefile
+===================================================================
+--- linux-3.10.12.orig/arch/mips/lantiq/xway/Makefile	2013-09-17 22:32:50.389021711 +0200
++++ linux-3.10.12/arch/mips/lantiq/xway/Makefile	2013-09-17 23:04:39.829103336 +0200
+@@ -1,6 +1,6 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
+ 
+-obj-y += vmmc.o
++obj-y += vmmc.o mtd_split.o
+ 
+ obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+ 
+Index: linux-3.10.12/arch/mips/lantiq/xway/mtd_split.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-3.10.12/arch/mips/lantiq/xway/mtd_split.c	2013-09-17 22:42:28.485046424 +0200
+@@ -0,0 +1,151 @@
++#include <linux/magic.h>
++#include <linux/root_dev.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++static void split_brnimage_kernel(struct mtd_info *master, const char *name,
++                                       int offset, int size)
++{
++	unsigned long buf[4];
++	// Assume at most 2MB of kernel image
++	unsigned long end = offset + (2 << 20);
++	unsigned long part_size = offset + 0x400 - 12;
++	size_t len;
++	int ret;
++
++	if (strcmp(name, "rootfs") != 0)
++		return;
++	while (part_size < end) {
++		long size_min = part_size - 0x400 - 12 - offset;
++		long size_max = part_size + 12 - offset;
++		ret = mtd_read(master, part_size, 16, &len, (void *)buf);
++		if (ret || len != 16)
++			return;
++
++		if (le32_to_cpu(buf[0]) < size_min ||
++				le32_to_cpu(buf[0]) > size_max) {
++			part_size += 0x400;
++			continue;
++		}
++
++		if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) {
++			part_size += 12 - offset;
++			__mtd_add_partition(master, "rootfs", offset + part_size,
++			                            size - part_size, false);
++			return;
++		}
++		part_size += 0x400;
++	}
++}
++
++static void split_eva_kernel(struct mtd_info *master, const char *name,
++				int offset, int size)
++{
++#define EVA_MAGIC   0xfeed1281
++	unsigned long magic = 0;
++	unsigned long part_size = 0;
++	size_t len;
++	int ret;
++
++	if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++		return;
++
++	ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++	if (ret || len != sizeof(magic))
++		return;
++
++	if (le32_to_cpu(magic) != EVA_MAGIC)
++		return;
++
++	ret = mtd_read(master, offset + 4, 4, &len, (void *)&part_size);
++	if (ret || len != sizeof(part_size))
++		return;
++
++	part_size = le32_to_cpu(part_size) + 0x18;
++	part_size = mtd_pad_erasesize(master, offset, len);
++	if (part_size + master->erasesize > size)
++		return;
++
++	__mtd_add_partition(master, "rootfs", offset + part_size,
++			    size - part_size, false);
++}
++
++static void split_tplink_kernel(struct mtd_info *master, const char *name,
++				int offset, int size)
++{
++#define TPLINK_MAGIC   0x00000002
++	unsigned long magic = 0;
++	unsigned long part_size = 0;
++	size_t len;
++	int ret;
++
++	if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++		return;
++
++	ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++	if (ret || len != sizeof(magic))
++		return;
++
++	if (le32_to_cpu(magic) != TPLINK_MAGIC)
++		return;
++
++	ret = mtd_read(master, offset + 0x78, 4, &len, (void *)&part_size);
++	if (ret || len != sizeof(part_size))
++		return;
++
++	part_size = be32_to_cpu(part_size) + 0x200;
++	if (part_size + master->erasesize > size)
++		return;
++
++	__mtd_add_partition(master, "rootfs", offset + part_size,
++			    size - part_size, false);
++}
++
++static void split_squashfs(struct mtd_info *master, const char *name,
++				int offset, int size)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	offset += 0x100;
++	size -= 0x100;
++
++	ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb)))
++		return;
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) )
++		return;
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0)
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		return;
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len = mtd_pad_erasesize(master, offset, len);
++	offset += len;
++	size -= len ;
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
++		ROOTFS_SPLIT_NAME, offset, size);
++
++	__mtd_add_partition(master, ROOTFS_SPLIT_NAME, offset,
++			    size, false);
++}
++
++void arch_split_mtd_part(struct mtd_info *master, const char *name,
++				int offset, int size)
++{
++	split_tplink_kernel(master, name, offset, size);
++	split_eva_kernel(master, name, offset, size);
++	split_brnimage_kernel(master, name, offset, size);
++	split_squashfs(master, name, offset, size);
++}
+Index: linux-3.10.12/include/linux/mtd/partitions.h
+===================================================================
+--- linux-3.10.12.orig/include/linux/mtd/partitions.h	2013-09-17 22:32:46.925021563 +0200
++++ linux-3.10.12/include/linux/mtd/partitions.h	2013-09-17 22:32:51.049021740 +0200
+@@ -82,9 +82,14 @@
+ int mtd_is_partition(const struct mtd_info *mtd);
+ int mtd_add_partition(struct mtd_info *master, char *name,
+ 		      long long offset, long long length);
++int __mtd_add_partition(struct mtd_info *master, char *name,
++		    long long offset, long long length, bool dup_check);
++
+ int mtd_del_partition(struct mtd_info *master, int partno);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+-extern void __weak arch_split_mtd_part(struct mtd_info *master,
++void __weak arch_split_mtd_part(struct mtd_info *master,
+ 				       const char *name, int offset, int size);
++unsigned long
++mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len);
+ 
+ #endif
+Index: linux-3.10.12/drivers/mtd/mtdpart.c
+===================================================================
+--- linux-3.10.12.orig/drivers/mtd/mtdpart.c	2013-09-17 22:32:46.973021565 +0200
++++ linux-3.10.12/drivers/mtd/mtdpart.c	2013-09-17 22:32:51.049021740 +0200
+@@ -617,7 +617,7 @@
+ }
+ 
+ 
+-static int
++int
+ __mtd_add_partition(struct mtd_info *master, char *name,
+ 		    long long offset, long long length, bool dup_check)
+ {
+@@ -707,7 +707,7 @@
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
+-static inline unsigned long
++unsigned long
+ mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
+ {
+ 	unsigned long mask = mtd->erasesize - 1;
+@@ -799,7 +799,6 @@
+ 		return;
+ 
+ 	len = be32_to_cpu(hdr.size) + 0x40;
+-	len = mtd_pad_erasesize(master, part->offset, len);
+ 	if (len + master->erasesize > part->mtd.size)
+ 		return;
+ 
diff --git a/target/linux/lantiq/patches-3.9/0020-owrt-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-3.10/0101-timer-backport.patch
index 2e2a810..008be43 100644
--- a/target/linux/lantiq/patches-3.9/0020-owrt-lantiq-backport-old-timer-code.patch
+++ b/target/linux/lantiq/patches-3.10/0101-timer-backport.patch
@@ -1,8 +1,9 @@
-From 077bcf8dea89b92d9ab8868e8234feb263c26a83 Mon Sep 17 00:00:00 2001
+From 2eb3fca4b1ed36841e281e014cc2e17ec9154533 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
 Date: Wed, 13 Mar 2013 10:01:49 +0100
-Subject: [PATCH 20/22] owrt: lantiq: backport old timer code
+Subject: [PATCH 08/34] MIPS: lantiq: backport old timer code
 
+Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
  arch/mips/lantiq/xway/Makefile                   |    2 +-
@@ -11,6 +12,9 @@ Subject: [PATCH 20/22] owrt: lantiq: backport old timer code
  create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
  create mode 100644 arch/mips/lantiq/xway/timer.c
 
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+new file mode 100644
+index 0000000..ef564ab
 --- /dev/null
 +++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
 @@ -0,0 +1,155 @@
@@ -169,14 +173,19 @@ Subject: [PATCH 20/22] owrt: lantiq: backport old timer code
 +	u32 reload, unsigned long arg1, unsigned long arg2);
 +
 +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index a2edc53..da51fe0 100644
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
 @@ -1,4 +1,4 @@
 -obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
 +obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
  
- obj-y += eth_mac.o vmmc.o
- obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+ obj-y += vmmc.o
+ 
+diff --git a/arch/mips/lantiq/xway/timer.c b/arch/mips/lantiq/xway/timer.c
+new file mode 100644
+index 0000000..1c0fdb8
 --- /dev/null
 +++ b/arch/mips/lantiq/xway/timer.c
 @@ -0,0 +1,845 @@
@@ -1025,3 +1034,6 @@ Subject: [PATCH 20/22] owrt: lantiq: backport old timer code
 +module_exit(lq_gptu_exit);
 +
 +#endif
+-- 
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.10/0102-generic-dtb-image-hack.patch
index 3047866..5692952 100644
--- a/target/linux/lantiq/patches-3.8/0035-owrt-generic-dtb-image-hack.patch
+++ b/target/linux/lantiq/patches-3.10/0102-generic-dtb-image-hack.patch
@@ -1,7 +1,7 @@
-From d9e7323db95818a92fc38e47e386ffb1a6fead5d Mon Sep 17 00:00:00 2001
+From e98005f02af333e0bf905a1e53caef009a37fc55 Mon Sep 17 00:00:00 2001
 From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:34:03 +0100
-Subject: [PATCH 35/40] owrt: generic dtb image hack
+Date: Sun, 14 Jul 2013 22:26:43 +0200
+Subject: [PATCH 22/22] owrt: generic dtb image hack
 
 ---
  arch/mips/kernel/head.S |    3 +++
diff --git a/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch b/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch
deleted file mode 100644
index e0d1645..0000000
--- a/target/linux/lantiq/patches-3.8/0002-SPI-MIPS-lantiq-make-use-of-spi_finalize_current_mes.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 8b921ffd449431543832b0e76389eb289cc78bb8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 29 Jan 2013 21:24:17 +0100
-Subject: [PATCH 02/40] SPI: MIPS: lantiq: make use of
- spi_finalize_current_message
-
-Rather than calling m->complete() directly we choose the sane way and call
-spi_finalize_current_message instead.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/spi-falcon.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/spi/spi-falcon.c
-+++ b/drivers/spi/spi-falcon.c
-@@ -398,7 +398,7 @@ static int falcon_sflash_xfer_one(struct
- 	}
- 
- 	m->status = ret;
--	m->complete(m->context);
-+	spi_finalize_current_message(master);
- 
- 	return 0;
- }
diff --git a/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch b/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch
deleted file mode 100644
index d98a37c..0000000
--- a/target/linux/lantiq/patches-3.8/0003-SPI-MIPS-lantiq-set-SPI_MASTER_HALF_DUPLEX-flag.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From a50f7db5b527c317c4bf2ae44a4ccdc8c7e598ab Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 29 Jan 2013 21:26:39 +0100
-Subject: [PATCH 03/40] SPI: MIPS: lantiq: set SPI_MASTER_HALF_DUPLEX flag
-
-Due to hardware limitations of the spi/flash frontend of the EBU we need to set
-the SPI_MASTER_HALF_DUPLEX flag.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/spi-falcon.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spi-falcon.c
-+++ b/drivers/spi/spi-falcon.c
-@@ -423,6 +423,7 @@ static int falcon_sflash_probe(struct pl
- 
- 	master->mode_bits = SPI_MODE_3;
- 	master->num_chipselect = 1;
-+	master->flags = SPI_MASTER_HALF_DUPLEX;
- 	master->bus_num = -1;
- 	master->setup = falcon_sflash_setup;
- 	master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;
diff --git a/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch b/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch
deleted file mode 100644
index 9efc13f..0000000
--- a/target/linux/lantiq/patches-3.8/0004-Document-devicetree-add-OF-documents-for-lantiq-seri.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8cd55f4107a3acda4793ed282a114af2f4cb4983 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 20 Jul 2012 18:58:34 +0200
-Subject: [PATCH 04/40] Document: devicetree: add OF documents for lantiq
- serial port
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: Rob Herring <rob.herring@calxeda.com>
-Cc: devicetree-discuss@lists.ozlabs.org
----
- .../devicetree/bindings/serial/lantiq_asc.txt          |   16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
-@@ -0,0 +1,16 @@
-+Lantiq SoC ASC serial controller
-+
-+Required properties:
-+- compatible : Should be "lantiq,asc"
-+- reg : Address and length of the register set for the device
-+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
-+  depends on the interrupt-parent interrupt controller.
-+
-+Example:
-+
-+asc1: serial@E100C00 {
-+	compatible = "lantiq,asc";
-+	reg = <0xE100C00 0x400>;
-+	interrupt-parent = <&icu0>;
-+	interrupts = <112 113 114>;
-+};
diff --git a/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch b/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
deleted file mode 100644
index c83dbd8..0000000
--- a/target/linux/lantiq/patches-3.8/0005-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 5e19578b807e7ef6e7baf05fb1f69433d5e74667 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 30 Nov 2012 21:11:22 +0100
-Subject: [PATCH 05/40] PINCTRL: lantiq: pinconf uses port instead of pin
-
-The XWAY pinctrl driver invalidly uses the port and not the pin number to work
-out the registeres and bits to be set for the opendrain and pullup/down
-resistors.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c |   28 ++++++++++++++--------------
- 1 file changed, 14 insertions(+), 14 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_OD;
- 		else
--			reg = GPIO_OD(port);
-+			reg = GPIO_OD(pin);
- 		*config = LTQ_PINCONF_PACK(param,
--			!!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
-+			!!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
- 		if (port == PORT3)
- 			reg = GPIO3_PUDEN;
- 		else
--			reg = GPIO_PUDEN(port);
--		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
-+			reg = GPIO_PUDEN(pin);
-+		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
- 			*config = LTQ_PINCONF_PACK(param, 0);
- 			break;
- 		}
-@@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_PUDSEL;
- 		else
--			reg = GPIO_PUDSEL(port);
--		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
-+			reg = GPIO_PUDSEL(pin);
-+		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
- 			*config = LTQ_PINCONF_PACK(param, 2);
- 		else
- 			*config = LTQ_PINCONF_PACK(param, 1);
-@@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinct
- 		if (port == PORT3)
- 			reg = GPIO3_OD;
- 		else
--			reg = GPIO_OD(port);
--		gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+			reg = GPIO_OD(pin);
-+		gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
- 		if (port == PORT3)
- 			reg = GPIO3_PUDEN;
- 		else
--			reg = GPIO_PUDEN(port);
-+			reg = GPIO_PUDEN(pin);
- 		if (arg == 0) {
--			gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
- 			break;
- 		}
--		gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+		gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 
- 		if (port == PORT3)
- 			reg = GPIO3_PUDSEL;
- 		else
--			reg = GPIO_PUDSEL(port);
-+			reg = GPIO_PUDSEL(pin);
- 		if (arg == 1)
--			gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
- 		else if (arg == 2)
--			gpio_setbit(info->membase[0], reg, PORT_PIN(port));
-+			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
- 		else
- 			dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
- 		break;
diff --git a/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch b/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch
deleted file mode 100644
index 9126495..0000000
--- a/target/linux/lantiq/patches-3.8/0006-PINCTRL-lantiq-faulty-bit-inversion.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 694063bb1049c6ff460f137a8011607103bad81b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 18:14:23 +0100
-Subject: [PATCH 06/40] PINCTRL: lantiq: faulty bit inversion
-
-The logic of the OD bit was inverted when calling the pinconf get methode.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -443,7 +443,7 @@ static int xway_pinconf_get(struct pinct
- 		else
- 			reg = GPIO_OD(pin);
- 		*config = LTQ_PINCONF_PACK(param,
--			!!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
-+			!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
diff --git a/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch b/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch
deleted file mode 100644
index f82d726..0000000
--- a/target/linux/lantiq/patches-3.8/0007-PINCTRL-lantiq-add-pin_config_group_set-support.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 325ba34823f454c35c814d72022ba736ad56a1d4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 18:21:48 +0100
-Subject: [PATCH 07/40] PINCTRL: lantiq: add pin_config_group_set support
-
-While converting all the boards supported by OpenWrt to OF I noticed that this
-feature is missing. Adding it makes the devicetrees more readable.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-lantiq.c |   54 ++++++++++++++++++++++++--------------
- drivers/pinctrl/pinctrl-xway.c   |   15 +++++++++++
- 2 files changed, 49 insertions(+), 20 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-lantiq.c
-+++ b/drivers/pinctrl/pinctrl-lantiq.c
-@@ -64,11 +64,13 @@ static void ltq_pinctrl_pin_dbg_show(str
- 	seq_printf(s, " %s", dev_name(pctldev->dev));
- }
- 
--static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-+static void ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
- 				struct device_node *np,
- 				struct pinctrl_map **map)
- {
- 	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
-+	struct property *pins = of_find_property(np, "lantiq,pins", NULL);
-+	struct property *groups = of_find_property(np, "lantiq,groups", NULL);
- 	unsigned long configs[3];
- 	unsigned num_configs = 0;
- 	struct property *prop;
-@@ -76,8 +78,20 @@ static int ltq_pinctrl_dt_subnode_to_map
- 	const char *function;
- 	int ret, i;
- 
-+	if (!pins && !groups) {
-+		dev_err(pctldev->dev, "%s defines neither pins nor groups\n",
-+			np->name);
-+		return;
-+	}
-+
-+	if (pins && groups) {
-+		dev_err(pctldev->dev, "%s defines both pins and groups\n",
-+			np->name);
-+		return;
-+	}
-+
- 	ret = of_property_read_string(np, "lantiq,function", &function);
--	if (!ret) {
-+	if (groups && !ret) {
- 		of_property_for_each_string(np, "lantiq,groups", prop, group) {
- 			(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
- 			(*map)->name = function;
-@@ -85,11 +99,6 @@ static int ltq_pinctrl_dt_subnode_to_map
- 			(*map)->data.mux.function = function;
- 			(*map)++;
- 		}
--		if (of_find_property(np, "lantiq,pins", NULL))
--			dev_err(pctldev->dev,
--				"%s mixes pins and groups settings\n",
--				np->name);
--		return 0;
- 	}
- 
- 	for (i = 0; i < info->num_params; i++) {
-@@ -103,7 +112,7 @@ static int ltq_pinctrl_dt_subnode_to_map
- 	}
- 
- 	if (!num_configs)
--		return -EINVAL;
-+		return;
- 
- 	of_property_for_each_string(np, "lantiq,pins", prop, pin) {
- 		(*map)->data.configs.configs = kmemdup(configs,
-@@ -115,7 +124,16 @@ static int ltq_pinctrl_dt_subnode_to_map
- 		(*map)->data.configs.num_configs = num_configs;
- 		(*map)++;
- 	}
--	return 0;
-+	of_property_for_each_string(np, "lantiq,groups", prop, group) {
-+		(*map)->data.configs.configs = kmemdup(configs,
-+					num_configs * sizeof(unsigned long),
-+					GFP_KERNEL);
-+		(*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP;
-+		(*map)->name = group;
-+		(*map)->data.configs.group_or_pin = group;
-+		(*map)->data.configs.num_configs = num_configs;
-+		(*map)++;
-+	}
- }
- 
- static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
-@@ -135,23 +153,19 @@ static int ltq_pinctrl_dt_node_to_map(st
- {
- 	struct pinctrl_map *tmp;
- 	struct device_node *np;
--	int ret;
-+	int max_maps = 0;
- 
--	*num_maps = 0;
- 	for_each_child_of_node(np_config, np)
--		*num_maps += ltq_pinctrl_dt_subnode_size(np);
--	*map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+		max_maps += ltq_pinctrl_dt_subnode_size(np);
-+	*map = kzalloc(max_maps * sizeof(struct pinctrl_map) * 2, GFP_KERNEL);
- 	if (!*map)
- 		return -ENOMEM;
- 	tmp = *map;
- 
--	for_each_child_of_node(np_config, np) {
--		ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
--		if (ret < 0) {
--			ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps);
--			return ret;
--		}
--	}
-+	for_each_child_of_node(np_config, np)
-+		ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
-+	*num_maps = ((int)(tmp - *map));
-+
- 	return 0;
- }
- 
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -522,9 +522,24 @@ static int xway_pinconf_set(struct pinct
- 	return 0;
- }
- 
-+int xway_pinconf_group_set(struct pinctrl_dev *pctldev,
-+			unsigned selector,
-+			unsigned long config)
-+{
-+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
-+	int i, ret = 0;
-+
-+	for (i = 0; i < info->grps[selector].npins && !ret; i++)
-+		ret = xway_pinconf_set(pctldev,
-+				info->grps[selector].pins[i], config);
-+
-+	return ret;
-+}
-+
- static struct pinconf_ops xway_pinconf_ops = {
- 	.pin_config_get	= xway_pinconf_get,
- 	.pin_config_set	= xway_pinconf_set,
-+	.pin_config_group_set = xway_pinconf_group_set,
- };
- 
- static struct pinctrl_desc xway_pctrl_desc = {
diff --git a/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch b/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
deleted file mode 100644
index ea3f7e0..0000000
--- a/target/linux/lantiq/patches-3.8/0008-PINCTRL-lantiq-add-output-pinconf-parameter.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From f9441b4f98b5b28f3d2cbebd0a70b227c35451d9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 18:33:39 +0100
-Subject: [PATCH 08/40] PINCTRL: lantiq: add output pinconf parameter
-
-While converting the boards inside OpenWrt to OF I noticed that the we are
-missing a pinconf parameter to set a pin to output.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-lantiq.h |    1 +
- drivers/pinctrl/pinctrl-xway.c   |   14 ++++++++++++++
- 2 files changed, 15 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-lantiq.h
-+++ b/drivers/pinctrl/pinctrl-lantiq.h
-@@ -34,6 +34,7 @@ enum ltq_pinconf_param {
- 	LTQ_PINCONF_PARAM_OPEN_DRAIN,
- 	LTQ_PINCONF_PARAM_DRIVE_CURRENT,
- 	LTQ_PINCONF_PARAM_SLEW_RATE,
-+	LTQ_PINCONF_PARAM_OUTPUT,
- };
- 
- struct ltq_cfg_param {
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -466,6 +466,11 @@ static int xway_pinconf_get(struct pinct
- 			*config = LTQ_PINCONF_PACK(param, 1);
- 		break;
- 
-+	case LTQ_PINCONF_PARAM_OUTPUT:
-+		reg = GPIO_DIR(pin);
-+		*config = LTQ_PINCONF_PACK(param,
-+			gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
-+		break;
- 	default:
- 		dev_err(pctldev->dev, "Invalid config param %04x\n", param);
- 		return -ENOTSUPP;
-@@ -515,6 +520,14 @@ static int xway_pinconf_set(struct pinct
- 			dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
- 		break;
- 
-+	case LTQ_PINCONF_PARAM_OUTPUT:
-+		reg = GPIO_DIR(pin);
-+		if (arg == 0)
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
-+		else
-+			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
-+		break;
-+
- 	default:
- 		dev_err(pctldev->dev, "Invalid config param %04x\n", param);
- 		return -ENOTSUPP;
-@@ -573,6 +586,7 @@ static inline int xway_mux_apply(struct
- static const struct ltq_cfg_param xway_cfg_params[] = {
- 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
- 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-+	{"lantiq,output",	LTQ_PINCONF_PARAM_OUTPUT},
- };
- 
- static struct ltq_pinmux_info xway_info = {
diff --git a/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch b/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch
deleted file mode 100644
index a4c8cf4..0000000
--- a/target/linux/lantiq/patches-3.8/0009-PINCTRL-lantiq-the-pinconf-OD-parameter-argument-was.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 879fe8a24167983d2923f635cb37dc9e02f6cf57 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 18:39:34 +0100
-Subject: [PATCH 09/40] PINCTRL: lantiq: the pinconf OD parameter argument was
- ignored
-
-When setting the OpenDrain bit we should really honour the argument passed
-inside the devicetree.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-xway.c |    5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -494,7 +494,10 @@ static int xway_pinconf_set(struct pinct
- 			reg = GPIO3_OD;
- 		else
- 			reg = GPIO_OD(pin);
--		gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
-+		if (arg == 0)
-+			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
-+		else
-+			gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
- 		break;
- 
- 	case LTQ_PINCONF_PARAM_PULL:
diff --git a/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch b/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch
deleted file mode 100644
index dbf9591..0000000
--- a/target/linux/lantiq/patches-3.8/0010-PINCTRL-lantiq-only-probe-available-pad-controllers.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 997390a8802e21b4b57d0ffcd91ad64651f1c2bf Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 20:02:06 +0100
-Subject: [PATCH 10/40] PINCTRL: lantiq: only probe available pad controllers
-
-The template falcon.dtsi lists all 6 pad controllers that can be loaded. Only
-probe those that have status = "okay"; inside the dts file.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-falcon.c |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-falcon.c
-+++ b/drivers/pinctrl/pinctrl-falcon.c
-@@ -398,6 +398,9 @@ static int pinctrl_falcon_probe(struct p
- 		u32 avail;
- 		int pins;
- 
-+		if (!of_device_is_available(np))
-+			continue;
-+
- 		if (!ppdev) {
- 			dev_err(&pdev->dev, "failed to find pad pdev\n");
- 			continue;
diff --git a/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch b/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch
deleted file mode 100644
index d84b811..0000000
--- a/target/linux/lantiq/patches-3.8/0011-PINCTRL-lantiq-one-of-the-boot-leds-was-defined-inco.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From b416a5be614733792cf5fbfce31b6733c37ffa3f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 20:07:51 +0100
-Subject: [PATCH 11/40] PINCTRL: lantiq: one of the boot leds was defined
- incorrectly
-
-On the Falcon SoC the bootleds are located on pins 9->14.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-falcon.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-falcon.c
-+++ b/drivers/pinctrl/pinctrl-falcon.c
-@@ -170,7 +170,7 @@ static const unsigned pins_ntr[] = {GPIO
- static const unsigned pins_ntr8k[] = {GPIO5};
- static const unsigned pins_hrst[] = {GPIO6};
- static const unsigned pins_mdio[] = {GPIO7, GPIO8};
--static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11,
-+static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11,
- 					GPIO12, GPIO13, GPIO14};
- static const unsigned pins_asc0[] = {GPIO32, GPIO33};
- static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
diff --git a/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch b/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch
deleted file mode 100644
index 7c08b11..0000000
--- a/target/linux/lantiq/patches-3.8/0012-PINCTRL-lantiq-fix-pinconfig-parameters.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From ea1a25a2ca058e4b35c5763774e7fad6ab928418 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 20:10:20 +0100
-Subject: [PATCH 12/40] PINCTRL: lantiq: fix pinconfig parameters
-
-The Falcon driver only defined the pinconf parameters but did not pass them
-properly to the underlying api.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-falcon.c |    2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-falcon.c
-+++ b/drivers/pinctrl/pinctrl-falcon.c
-@@ -360,6 +360,8 @@ static const struct ltq_cfg_param falcon
- static struct ltq_pinmux_info falcon_info = {
- 	.desc		= &falcon_pctrl_desc,
- 	.apply_mux	= falcon_mux_apply,
-+	.params		= falcon_cfg_params,
-+	.num_params	= ARRAY_SIZE(falcon_cfg_params),
- };
- 
- 
diff --git a/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch b/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch
deleted file mode 100644
index cc1f478..0000000
--- a/target/linux/lantiq/patches-3.8/0013-PINCTRL-lantiq-add-functionality-to-falcon_pinconf_d.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 98d06bc9e2a2f534aaaf4229aaf871e394234d20 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 20:13:09 +0100
-Subject: [PATCH 13/40] PINCTRL: lantiq: add functionality to
- falcon_pinconf_dbg_show
-
-The current code only has a stub for falcon_pinconf_dbg_show. This patch adds
-proper functionality.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-falcon.c |   31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-falcon.c
-+++ b/drivers/pinctrl/pinctrl-falcon.c
-@@ -315,6 +315,37 @@ static int falcon_pinconf_set(struct pin
- static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
- 			struct seq_file *s, unsigned offset)
- {
-+	unsigned long config;
-+	struct pin_desc *desc;
-+
-+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-+	int port = PORT(offset);
-+
-+	seq_printf(s, " (port %d) mux %d -- ", port,
-+		pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset))));
-+
-+	config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0);
-+	if (!falcon_pinconf_get(pctrldev, offset, &config))
-+		seq_printf(s, "pull %d ",
-+			(int)LTQ_PINCONF_UNPACK_ARG(config));
-+
-+	config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0);
-+	if (!falcon_pinconf_get(pctrldev, offset, &config))
-+		seq_printf(s, "drive-current %d ",
-+			(int)LTQ_PINCONF_UNPACK_ARG(config));
-+
-+	config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0);
-+	if (!falcon_pinconf_get(pctrldev, offset, &config))
-+		seq_printf(s, "slew-rate %d ",
-+			(int)LTQ_PINCONF_UNPACK_ARG(config));
-+
-+	desc = pin_desc_get(pctrldev, offset);
-+	if (desc) {
-+		if (desc->gpio_owner)
-+			seq_printf(s, " owner: %s", desc->gpio_owner);
-+	} else {
-+		seq_printf(s, " not registered");
-+	}
- }
- 
- static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
diff --git a/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch b/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch
deleted file mode 100644
index f9cfd16..0000000
--- a/target/linux/lantiq/patches-3.8/0014-PINCTRL-lantiq-fix-pin-availability-check.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 51d5029bd9cd0ff85e1df87a4df57e544c52dc34 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 20:16:22 +0100
-Subject: [PATCH 14/40] PINCTRL: lantiq: fix pin availability check
-
-The clock needs to be activated for the check to work. In order to be compatible
-with future silicon make sure that at least 1 pin is available before probing
-the pad controller.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-falcon.c |   11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-falcon.c
-+++ b/drivers/pinctrl/pinctrl-falcon.c
-@@ -455,12 +455,17 @@ static int pinctrl_falcon_probe(struct p
- 				*bank);
- 			return -ENOMEM;
- 		}
-+		clk_activate(falcon_info.clk[*bank]);
- 		avail = pad_r32(falcon_info.membase[*bank],
- 					LTQ_PADC_AVAIL);
- 		pins = fls(avail);
--		lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins);
--		pad_count += pins;
--		clk_enable(falcon_info.clk[*bank]);
-+		if (pins) {
-+			lantiq_load_pin_desc(&falcon_pads[pad_count],
-+								*bank, pins);
-+			pad_count += pins;
-+		} else {
-+			clk_deactivate(falcon_info.clk[*bank]);
-+		}
- 		dev_dbg(&pdev->dev, "found %s with %d pads\n",
- 				res.name, pins);
- 	}
diff --git a/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch b/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch
deleted file mode 100644
index 570c2c9..0000000
--- a/target/linux/lantiq/patches-3.8/0015-PINCTRL-lantiq-fix-pin-number-in-ltq_pmx_gpio_reques.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 363f0d3dc146215744363db97606a357310fad3d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 21:23:22 +0100
-Subject: [PATCH 15/40] PINCTRL: lantiq: fix pin number in
- ltq_pmx_gpio_request_enable
-
-The mapping logic inside ltq_pmx_gpio_request_enable() was broken. This only
-effected Falcon SoC.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pinctrl/pinctrl-lantiq.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-lantiq.c
-+++ b/drivers/pinctrl/pinctrl-lantiq.c
-@@ -294,7 +294,7 @@ static int ltq_pmx_gpio_request_enable(s
- 				unsigned pin)
- {
- 	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
--	int mfp = match_mfp(info, pin + (range->id * 32));
-+	int mfp = match_mfp(info, pin);
- 	int pin_func;
- 
- 	if (mfp < 0) {
diff --git a/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch b/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch
deleted file mode 100644
index 7af4ad4..0000000
--- a/target/linux/lantiq/patches-3.8/0016-MIPS-lantiq-trivial-typo-fix.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From cc64558db2d91e89e1de174b6ad4a159ac27bf8b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 19 Jan 2013 08:54:23 +0000
-Subject: [PATCH 16/40] MIPS: lantiq: trivial typo fix
-
-"nodes" is written with a single "s"
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/4814/
----
- arch/mips/lantiq/xway/sysctrl.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -305,7 +305,7 @@ void __init ltq_soc_init(void)
- 
- 	/* check if all the core register ranges are available */
- 	if (!np_pmu || !np_cgu || !np_ebu)
--		panic("Failed to load core nodess from devicetree");
-+		panic("Failed to load core nodes from devicetree");
- 
- 	if (of_address_to_resource(np_pmu, 0, &res_pmu) ||
- 			of_address_to_resource(np_cgu, 0, &res_cgu) ||
diff --git a/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch b/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch
deleted file mode 100644
index 9542a21..0000000
--- a/target/linux/lantiq/patches-3.8/0017-MIPS-lantiq-adds-static-clock-for-PP32.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From 46a704b1b093f4053eceaf8e5f0ab54949afa532 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 19 Jan 2013 08:54:24 +0000
-Subject: [PATCH 17/40] MIPS: lantiq: adds static clock for PP32
-
-The Lantiq DSL SoCs have an internal networking processor. Add code to read
-the static clock rate.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/4815/
----
- arch/mips/include/asm/mach-lantiq/lantiq.h |    1 +
- arch/mips/lantiq/clk.c                     |   12 ++++++--
- arch/mips/lantiq/clk.h                     |    7 ++++-
- arch/mips/lantiq/falcon/sysctrl.c          |    4 +--
- arch/mips/lantiq/xway/clk.c                |   43 ++++++++++++++++++++++++++++
- arch/mips/lantiq/xway/sysctrl.c            |   12 ++++----
- 6 files changed, 69 insertions(+), 10 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/lantiq.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -41,6 +41,7 @@ extern void clk_deactivate(struct clk *c
- extern struct clk *clk_get_cpu(void);
- extern struct clk *clk_get_fpi(void);
- extern struct clk *clk_get_io(void);
-+extern struct clk *clk_get_ppe(void);
- 
- /* find out what bootsource we have */
- extern unsigned char ltq_boot_select(void);
---- a/arch/mips/lantiq/clk.c
-+++ b/arch/mips/lantiq/clk.c
-@@ -26,13 +26,15 @@
- #include "prom.h"
- 
- /* lantiq socs have 3 static clocks */
--static struct clk cpu_clk_generic[3];
-+static struct clk cpu_clk_generic[4];
- 
--void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
-+void clkdev_add_static(unsigned long cpu, unsigned long fpi,
-+			unsigned long io, unsigned long ppe)
- {
- 	cpu_clk_generic[0].rate = cpu;
- 	cpu_clk_generic[1].rate = fpi;
- 	cpu_clk_generic[2].rate = io;
-+	cpu_clk_generic[3].rate = ppe;
- }
- 
- struct clk *clk_get_cpu(void)
-@@ -51,6 +53,12 @@ struct clk *clk_get_io(void)
- 	return &cpu_clk_generic[2];
- }
- 
-+struct clk *clk_get_ppe(void)
-+{
-+	return &cpu_clk_generic[3];
-+}
-+EXPORT_SYMBOL_GPL(clk_get_ppe);
-+
- static inline int clk_good(struct clk *clk)
- {
- 	return clk && !IS_ERR(clk);
---- a/arch/mips/lantiq/clk.h
-+++ b/arch/mips/lantiq/clk.h
-@@ -27,12 +27,15 @@
- #define CLOCK_167M	166666667
- #define CLOCK_196_608M	196608000
- #define CLOCK_200M	200000000
-+#define CLOCK_222M	222000000
-+#define CLOCK_240M	240000000
- #define CLOCK_250M	250000000
- #define CLOCK_266M	266666666
- #define CLOCK_300M	300000000
- #define CLOCK_333M	333333333
- #define CLOCK_393M	393215332
- #define CLOCK_400M	400000000
-+#define CLOCK_450M	450000000
- #define CLOCK_500M	500000000
- #define CLOCK_600M	600000000
- 
-@@ -64,15 +67,17 @@ struct clk {
- };
- 
- extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
--				unsigned long io);
-+				unsigned long io, unsigned long ppe);
- 
- extern unsigned long ltq_danube_cpu_hz(void);
- extern unsigned long ltq_danube_fpi_hz(void);
-+extern unsigned long ltq_danube_pp32_hz(void);
- 
- extern unsigned long ltq_ar9_cpu_hz(void);
- extern unsigned long ltq_ar9_fpi_hz(void);
- 
- extern unsigned long ltq_vr9_cpu_hz(void);
- extern unsigned long ltq_vr9_fpi_hz(void);
-+extern unsigned long ltq_vr9_pp32_hz(void);
- 
- #endif
---- a/arch/mips/lantiq/falcon/sysctrl.c
-+++ b/arch/mips/lantiq/falcon/sysctrl.c
-@@ -241,9 +241,9 @@ void __init ltq_soc_init(void)
- 
- 	/* get our 3 static rates for cpu, fpi and io clocks */
- 	if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
--		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
-+		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0);
- 	else
--		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
-+		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0);
- 
- 	/* add our clock domains */
- 	clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -53,6 +53,29 @@ unsigned long ltq_danube_cpu_hz(void)
- 	}
- }
- 
-+unsigned long ltq_danube_pp32_hz(void)
-+{
-+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3;
-+	unsigned long clk;
-+
-+	switch (clksys) {
-+	case 1:
-+		clk = CLOCK_240M;
-+		break;
-+	case 2:
-+		clk = CLOCK_222M;
-+		break;
-+	case 3:
-+		clk = CLOCK_133M;
-+		break;
-+	default:
-+		clk = CLOCK_266M;
-+		break;
-+	}
-+
-+	return clk;
-+}
-+
- unsigned long ltq_ar9_sys_hz(void)
- {
- 	if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2)
-@@ -147,5 +170,25 @@ unsigned long ltq_vr9_fpi_hz(void)
- 		break;
- 	}
- 
-+	return clk;
-+}
-+
-+unsigned long ltq_vr9_pp32_hz(void)
-+{
-+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
-+	unsigned long clk;
-+
-+	switch (clksys) {
-+	case 1:
-+		clk = CLOCK_450M;
-+		break;
-+	case 2:
-+		clk = CLOCK_300M;
-+		break;
-+	default:
-+		clk = CLOCK_500M;
-+		break;
-+	}
-+
- 	return clk;
- }
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -356,14 +356,16 @@ void __init ltq_soc_init(void)
- 
- 	if (of_machine_is_compatible("lantiq,ase")) {
- 		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
--			clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
-+			clkdev_add_static(CLOCK_266M, CLOCK_133M,
-+						CLOCK_133M, CLOCK_266M);
- 		else
--			clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
-+			clkdev_add_static(CLOCK_133M, CLOCK_133M,
-+						CLOCK_133M, CLOCK_133M);
- 		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
- 		clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
- 	} else if (of_machine_is_compatible("lantiq,vr9")) {
- 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
--				ltq_vr9_fpi_hz());
-+				ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
- 		clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
- 		clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
- 		clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
-@@ -376,10 +378,10 @@ void __init ltq_soc_init(void)
- 				PMU_PPE_QSB | PMU_PPE_TOP);
- 	} else if (of_machine_is_compatible("lantiq,ar9")) {
- 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
--				ltq_ar9_fpi_hz());
-+				ltq_ar9_fpi_hz(), CLOCK_250M);
- 		clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
- 	} else {
- 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
--				ltq_danube_fpi_hz());
-+				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
- 	}
- }
diff --git a/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch b/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch
deleted file mode 100644
index ca62cbf..0000000
--- a/target/linux/lantiq/patches-3.8/0018-MIPS-lantiq-improve-pci-reset-gpio-handling.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From b6684dd3036513e4f91986fe982356512458f711 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 19 Jan 2013 08:54:26 +0000
-Subject: [PATCH 18/40] MIPS: lantiq: improve pci reset gpio handling
-
-We need to make sure that the reset gpio is available and also set a sane
-default state.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/4817/
----
- arch/mips/pci/pci-lantiq.c |   12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/arch/mips/pci/pci-lantiq.c
-+++ b/arch/mips/pci/pci-lantiq.c
-@@ -129,8 +129,16 @@ static int ltq_pci_startup(struct platfo
- 
- 	/* setup reset gpio used by pci */
- 	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
--	if (gpio_is_valid(reset_gpio))
--		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
-+	if (gpio_is_valid(reset_gpio)) {
-+		int ret = devm_gpio_request(&pdev->dev,
-+						reset_gpio, "pci-reset");
-+		if (ret) {
-+			dev_err(&pdev->dev,
-+				"failed to request gpio %d\n", reset_gpio);
-+			return ret;
-+		}
-+		gpio_direction_output(reset_gpio, 1);
-+	}
- 
- 	/* enable auto-switching between PCI and EBU */
- 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
diff --git a/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch b/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch
deleted file mode 100644
index c78d738..0000000
--- a/target/linux/lantiq/patches-3.8/0019-MIPS-lantiq-rework-external-irq-code.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From d8f6bf3fb606ee8fdd5b7aff4aedb54e30792b84 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 19 Jan 2013 08:54:27 +0000
-Subject: [PATCH 19/40] MIPS: lantiq: rework external irq code
-
-This code makes the irqs used by the EIU loadable from the DT. Additionally we
-add a helper that allows the pinctrl layer to map external irqs to real irq
-numbers.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Patchwork: http://patchwork.linux-mips.org/patch/4818/
----
- arch/mips/include/asm/mach-lantiq/lantiq.h |    1 +
- arch/mips/lantiq/irq.c                     |  105 +++++++++++++++++++---------
- 2 files changed, 74 insertions(+), 32 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/lantiq.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -34,6 +34,7 @@ extern spinlock_t ebu_lock;
- extern void ltq_disable_irq(struct irq_data *data);
- extern void ltq_mask_and_ack_irq(struct irq_data *data);
- extern void ltq_enable_irq(struct irq_data *data);
-+extern int ltq_eiu_get_irq(int exin);
- 
- /* clock handling */
- extern int clk_activate(struct clk *clk);
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -33,17 +33,10 @@
- /* register definitions - external irqs */
- #define LTQ_EIU_EXIN_C		0x0000
- #define LTQ_EIU_EXIN_INIC	0x0004
-+#define LTQ_EIU_EXIN_INC	0x0008
- #define LTQ_EIU_EXIN_INEN	0x000C
- 
--/* irq numbers used by the external interrupt unit (EIU) */
--#define LTQ_EIU_IR0		(INT_NUM_IM4_IRL0 + 30)
--#define LTQ_EIU_IR1		(INT_NUM_IM3_IRL0 + 31)
--#define LTQ_EIU_IR2		(INT_NUM_IM1_IRL0 + 26)
--#define LTQ_EIU_IR3		INT_NUM_IM1_IRL0
--#define LTQ_EIU_IR4		(INT_NUM_IM1_IRL0 + 1)
--#define LTQ_EIU_IR5		(INT_NUM_IM1_IRL0 + 2)
--#define LTQ_EIU_IR6		(INT_NUM_IM2_IRL0 + 30)
--#define XWAY_EXIN_COUNT		3
-+/* number of external interrupts */
- #define MAX_EIU			6
- 
- /* the performance counter */
-@@ -72,20 +65,19 @@
- int gic_present;
- #endif
- 
--static unsigned short ltq_eiu_irq[MAX_EIU] = {
--	LTQ_EIU_IR0,
--	LTQ_EIU_IR1,
--	LTQ_EIU_IR2,
--	LTQ_EIU_IR3,
--	LTQ_EIU_IR4,
--	LTQ_EIU_IR5,
--};
--
- static int exin_avail;
-+static struct resource ltq_eiu_irq[MAX_EIU];
- static void __iomem *ltq_icu_membase[MAX_IM];
- static void __iomem *ltq_eiu_membase;
- static struct irq_domain *ltq_domain;
- 
-+int ltq_eiu_get_irq(int exin)
-+{
-+	if (exin < exin_avail)
-+		return ltq_eiu_irq[exin].start;
-+	return -1;
-+}
-+
- void ltq_disable_irq(struct irq_data *d)
- {
- 	u32 ier = LTQ_ICU_IM0_IER;
-@@ -128,19 +120,65 @@ void ltq_enable_irq(struct irq_data *d)
- 	ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier);
- }
- 
-+static int ltq_eiu_settype(struct irq_data *d, unsigned int type)
-+{
-+	int i;
-+
-+	for (i = 0; i < MAX_EIU; i++) {
-+		if (d->hwirq == ltq_eiu_irq[i].start) {
-+			int val = 0;
-+			int edge = 0;
-+
-+			switch (type) {
-+			case IRQF_TRIGGER_NONE:
-+				break;
-+			case IRQF_TRIGGER_RISING:
-+				val = 1;
-+				edge = 1;
-+				break;
-+			case IRQF_TRIGGER_FALLING:
-+				val = 2;
-+				edge = 1;
-+				break;
-+			case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING:
-+				val = 3;
-+				edge = 1;
-+				break;
-+			case IRQF_TRIGGER_HIGH:
-+				val = 5;
-+				break;
-+			case IRQF_TRIGGER_LOW:
-+				val = 6;
-+				break;
-+			default:
-+				pr_err("invalid type %d for irq %ld\n",
-+					type, d->hwirq);
-+				return -EINVAL;
-+			}
-+
-+			if (edge)
-+				irq_set_handler(d->hwirq, handle_edge_irq);
-+
-+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
-+				(val << (i * 4)), LTQ_EIU_EXIN_C);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
- static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
- {
- 	int i;
- 
- 	ltq_enable_irq(d);
- 	for (i = 0; i < MAX_EIU; i++) {
--		if (d->hwirq == ltq_eiu_irq[i]) {
--			/* low level - we should really handle set_type */
--			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
--				(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
-+		if (d->hwirq == ltq_eiu_irq[i].start) {
-+			/* by default we are low level triggered */
-+			ltq_eiu_settype(d, IRQF_TRIGGER_LOW);
- 			/* clear all pending */
--			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~BIT(i),
--				LTQ_EIU_EXIN_INIC);
-+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i),
-+				LTQ_EIU_EXIN_INC);
- 			/* enable */
- 			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i),
- 				LTQ_EIU_EXIN_INEN);
-@@ -157,7 +195,7 @@ static void ltq_shutdown_eiu_irq(struct
- 
- 	ltq_disable_irq(d);
- 	for (i = 0; i < MAX_EIU; i++) {
--		if (d->hwirq == ltq_eiu_irq[i]) {
-+		if (d->hwirq == ltq_eiu_irq[i].start) {
- 			/* disable */
- 			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i),
- 				LTQ_EIU_EXIN_INEN);
-@@ -186,6 +224,7 @@ static struct irq_chip ltq_eiu_type = {
- 	.irq_ack = ltq_ack_irq,
- 	.irq_mask = ltq_disable_irq,
- 	.irq_mask_ack = ltq_mask_and_ack_irq,
-+	.irq_set_type = ltq_eiu_settype,
- };
- 
- static void ltq_hw_irqdispatch(int module)
-@@ -301,7 +340,7 @@ static int icu_map(struct irq_domain *d,
- 		return 0;
- 
- 	for (i = 0; i < exin_avail; i++)
--		if (hw == ltq_eiu_irq[i])
-+		if (hw == ltq_eiu_irq[i].start)
- 			chip = &ltq_eiu_type;
- 
- 	irq_set_chip_and_handler(hw, chip, handle_level_irq);
-@@ -323,7 +362,7 @@ int __init icu_of_init(struct device_nod
- {
- 	struct device_node *eiu_node;
- 	struct resource res;
--	int i;
-+	int i, ret;
- 
- 	for (i = 0; i < MAX_IM; i++) {
- 		if (of_address_to_resource(node, i, &res))
-@@ -340,17 +379,19 @@ int __init icu_of_init(struct device_nod
- 	}
- 
- 	/* the external interrupts are optional and xway only */
--	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu");
-+	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
- 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
- 		/* find out how many external irq sources we have */
--		const __be32 *count = of_get_property(node,
--							"lantiq,count",	NULL);
-+		exin_avail = of_irq_count(eiu_node);
- 
--		if (count)
--			exin_avail = *count;
- 		if (exin_avail > MAX_EIU)
- 			exin_avail = MAX_EIU;
- 
-+		ret = of_irq_to_resource_table(eiu_node,
-+						ltq_eiu_irq, exin_avail);
-+		if (ret != exin_avail)
-+			panic("failed to load external irq resources\n");
-+
- 		if (request_mem_region(res.start, resource_size(&res),
- 							res.name) < 0)
- 			pr_err("Failed to request eiu memory");
diff --git a/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch b/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
deleted file mode 100644
index 4e97f95..0000000
--- a/target/linux/lantiq/patches-3.8/0020-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 5be3837d01ea56e1455781f1b51764bd896973f2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 11:59:23 +0100
-Subject: [PATCH 20/40] MIPS: lantiq: adds 4dword burst length for dma
-
----
- arch/mips/lantiq/xway/dma.c |    4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -47,6 +47,7 @@
- #define DMA_IRQ_ACK		0x7e		/* IRQ status register */
- #define DMA_POLL		BIT(31)		/* turn on channel polling */
- #define DMA_CLK_DIV4		BIT(6)		/* polling clock divider */
-+#define DMA_4W_BURST		BIT(2)		/* 4 word burst length */
- #define DMA_2W_BURST		BIT(1)		/* 2 word burst length */
- #define DMA_MAX_CHANNEL		20		/* the soc has 20 channels */
- #define DMA_ETOP_ENDIANNESS	(0xf << 8) /* endianness swap etop channels */
-@@ -195,7 +196,8 @@ ltq_dma_init_port(int p)
- 		 * Tell the DMA engine to swap the endianness of data frames and
- 		 * drop packets if the channel arbitration fails.
- 		 */
--		ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
-+		ltq_dma_w32_mask(0, (DMA_4W_BURST << 4) | (DMA_4W_BURST << 2) |
-+			DMA_ETOP_ENDIANNESS | DMA_PDEN,
- 			LTQ_DMA_PCTRL);
- 		break;
- 
diff --git a/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
deleted file mode 100644
index 7400bef..0000000
--- a/target/linux/lantiq/patches-3.8/0022-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ /dev/null
@@ -1,1034 +0,0 @@
-From 09628160c97e9bd7dfbb39fd467cf17f1e43e85c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 20 May 2012 00:42:39 +0200
-Subject: [PATCH 22/40] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig      |   10 +
- drivers/i2c/busses/Makefile     |    1 +
- drivers/i2c/busses/i2c-lantiq.c |  747 +++++++++++++++++++++++++++++++++++++++
- drivers/i2c/busses/i2c-lantiq.h |  234 ++++++++++++
- 4 files changed, 992 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-lantiq.c
- create mode 100644 drivers/i2c/busses/i2c-lantiq.h
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -470,6 +470,16 @@ config I2C_IOP3XX
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-iop3xx.
- 
-+config I2C_LANTIQ
-+	tristate "Lantiq I2C interface"
-+	depends on LANTIQ && SOC_FALCON
-+	help
-+	  If you say yes to this option, support will be included for the
-+	  Lantiq I2C core.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called i2c-lantiq.
-+
- config I2C_MPC
- 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
- 	depends on PPC
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic
- obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
- obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
- obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
-+obj-$(CONFIG_I2C_LANTIQ)	+= i2c-lantiq.o
- obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
- obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
- obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.c
-@@ -0,0 +1,747 @@
-+
-+/*
-+ * Lantiq I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h> /* for kzalloc, kfree */
-+#include <linux/i2c.h>
-+#include <linux/errno.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_i2c.h>
-+
-+#include <lantiq_soc.h>
-+#include "i2c-lantiq.h"
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+/* access macros */
-+#define i2c_r32(reg)	\
-+	__raw_readl(&(priv->membase)->reg)
-+#define i2c_w32(val, reg)	\
-+	__raw_writel(val, &(priv->membase)->reg)
-+#define i2c_w32_mask(clear, set, reg)	\
-+	i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg)
-+
-+#define DRV_NAME "i2c-lantiq"
-+#define DRV_VERSION "1.00"
-+
-+#define LTQ_I2C_BUSY_TIMEOUT		20 /* ms */
-+
-+#ifdef DEBUG
-+#define LTQ_I2C_XFER_TIMEOUT		(25*HZ)
-+#else
-+#define LTQ_I2C_XFER_TIMEOUT		HZ
-+#endif
-+
-+#define LTQ_I2C_IMSC_DEFAULT_MASK	(I2C_IMSC_I2C_P_INT_EN | \
-+					 I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define LTQ_I2C_ARB_LOST		(1 << 0)
-+#define LTQ_I2C_NACK			(1 << 1)
-+#define LTQ_I2C_RX_UFL			(1 << 2)
-+#define LTQ_I2C_RX_OFL			(1 << 3)
-+#define LTQ_I2C_TX_UFL			(1 << 4)
-+#define LTQ_I2C_TX_OFL			(1 << 5)
-+
-+struct ltq_i2c {
-+	struct mutex mutex;
-+
-+
-+	/* active clock settings */
-+	unsigned int input_clock;	/* clock input for i2c hardware block */
-+	unsigned int i2c_clock;		/* approximated bus clock in kHz */
-+
-+	struct clk *clk_gate;
-+	struct clk *clk_input;
-+
-+
-+	/* resources (memory and interrupts) */
-+	int irq_lb;				/* last burst irq */
-+
-+	struct lantiq_reg_i2c __iomem *membase;	/* base of mapped registers */
-+
-+	struct i2c_adapter adap;
-+	struct device *dev;
-+
-+	struct completion cmd_complete;
-+
-+
-+	/* message transfer data */
-+	struct i2c_msg *current_msg;	/* current message */
-+	int msgs_num;		/* number of messages to handle */
-+	u8 *msg_buf;		/* current buffer */
-+	u32 msg_buf_len;	/* remaining length of current buffer */
-+	int msg_err;		/* error status of the current transfer */
-+
-+
-+	/* master status codes */
-+	enum {
-+		STATUS_IDLE,
-+		STATUS_ADDR,	/* address phase */
-+		STATUS_WRITE,
-+		STATUS_READ,
-+		STATUS_READ_END,
-+		STATUS_STOP
-+	} status;
-+};
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct ltq_i2c *priv)
-+{
-+	i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int rd = !!(msg->flags & I2C_M_RD);	/* extends to 0 or 1 */
-+	u16 addr = msg->addr;
-+
-+	/* new i2c_msg */
-+	priv->msg_buf = msg->buf;
-+	priv->msg_buf_len = msg->len;
-+	if (rd)
-+		priv->status = STATUS_READ;
-+	else
-+		priv->status = STATUS_WRITE;
-+
-+	/* send slave address */
-+	if (msg->flags & I2C_M_TEN) {
-+		i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+		i2c_w32(addr & 0xff, txd);
-+	} else {
-+		i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+	}
-+}
-+
-+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv)
-+{
-+	struct i2c_msg *msg = priv->current_msg;
-+	int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+	pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T');
-+
-+	priv->status = STATUS_ADDR;
-+
-+	if (!(msg->flags & I2C_M_RD))
-+		len += msg->len;
-+	else
-+		/* set maximum received packet size (before rx int!) */
-+		i2c_w32(msg->len, mrps_ctrl);
-+	i2c_w32(len, tps_ctrl);
-+	enable_burst_irq(priv);
-+}
-+
-+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	unsigned int input_clock = clk_get_rate(priv->clk_input);
-+	u32 dec, inc = 1;
-+
-+	/* clock changed? */
-+	if (priv->input_clock == input_clock)
-+		return 0;
-+
-+	/*
-+	 * this formula is only an approximation, found by the recommended
-+	 * values in the "I2C Architecture Specification 1.7.1"
-+	 */
-+	dec = input_clock / (priv->i2c_clock * 2);
-+	if (dec <= 6)
-+		return -ENXIO;
-+
-+	i2c_w32(0, fdiv_high_cfg);
-+	i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) |
-+		(dec << I2C_FDIV_CFG_DEC_OFFSET),
-+		fdiv_cfg);
-+
-+	dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n",
-+		input_clock, priv->i2c_clock, dec);
-+
-+	priv->input_clock = input_clock;
-+	return 0;
-+}
-+
-+static int ltq_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+	int ret = 0;
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+	/* set normal operation clock divider */
-+	i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+	/* for debugging a higher divider value! */
-+	i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+	/* setup clock */
-+	ret = ltq_i2c_hw_set_clock(adap);
-+	if (ret != 0) {
-+		dev_warn(priv->dev, "invalid clock settings\n");
-+		return ret;
-+	}
-+
-+	/* configure fifo */
-+	i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+		I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+		I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+		I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+		I2C_FIFO_CFG_RXBS_RXBS0,  /* rx fifo burst size is 1 word */
-+		fifo_cfg);
-+
-+	/* configure address */
-+	i2c_w32(I2C_ADDR_CFG_SOPE_EN |	/* generate stop when no more data in
-+					   the fifo */
-+		I2C_ADDR_CFG_SONA_EN |	/* generate stop when NA received */
-+		I2C_ADDR_CFG_MnS_EN |	/* we are master device */
-+		0,			/* our slave address (not used!) */
-+		addr_cfg);
-+
-+	/* enable bus */
-+	i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+	return 0;
-+}
-+
-+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv)
-+{
-+	unsigned long timeout;
-+
-+	timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT);
-+
-+	do {
-+		u32 stat = i2c_r32(bus_stat);
-+
-+		if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE)
-+			return 0;
-+
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
-+	dev_err(priv->dev, "timeout waiting for bus ready\n");
-+	return -ETIMEDOUT;
-+}
-+
-+static void ltq_i2c_tx(struct ltq_i2c *priv, int last)
-+{
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		i2c_w32(*priv->msg_buf, txd);
-+
-+		if (--priv->msg_buf_len)
-+			priv->msg_buf++;
-+		else
-+			priv->msg_buf = NULL;
-+	} else {
-+		last = 1;
-+	}
-+
-+	if (last)
-+		disable_burst_irq(priv);
-+}
-+
-+static void ltq_i2c_rx(struct ltq_i2c *priv, int last)
-+{
-+	u32 fifo_stat, timeout;
-+	if (priv->msg_buf_len && priv->msg_buf) {
-+		timeout = 5000000;
-+		do {
-+			fifo_stat = i2c_r32(ffs_stat);
-+		} while (!fifo_stat && --timeout);
-+		if (!timeout) {
-+			last = 1;
-+			pr_debug("\nrx timeout\n");
-+			goto err;
-+		}
-+		while (fifo_stat) {
-+			*priv->msg_buf = i2c_r32(rxd);
-+			if (--priv->msg_buf_len) {
-+				priv->msg_buf++;
-+			} else {
-+				priv->msg_buf = NULL;
-+				last = 1;
-+				break;
-+			}
-+			/*
-+			 * do not read more than burst size, otherwise no "last
-+			 * burst" is generated and the transaction is blocked!
-+			 */
-+			fifo_stat = 0;
-+		}
-+	} else {
-+		last = 1;
-+	}
-+err:
-+	if (last) {
-+		disable_burst_irq(priv);
-+
-+		if (priv->status == STATUS_READ_END) {
-+			/* 
-+			 * do the STATUS_STOP and complete() here, as sometimes
-+			 * the tx_end is already seen before this is finished
-+			 */
-+			priv->status = STATUS_STOP;
-+			complete(&priv->cmd_complete);
-+		} else {
-+			i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+			priv->status = STATUS_READ_END;
-+		}
-+	}
-+}
-+
-+static void ltq_i2c_xfer_init(struct ltq_i2c *priv)
-+{
-+	/* enable interrupts */
-+	i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+	/* trigger transfer of first msg */
-+	ltq_i2c_set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+	int i, j;
-+	pr_debug("Messages %d %s\n", num, rx ? "out" : "in");
-+	for (i = 0; i < num; i++) {
-+		pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i,
-+			(msgs[i].flags & I2C_M_RD) ? 'R' : 'T',
-+			msgs[i].len, msgs[i].addr);
-+		if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+			for (j = 0; j < msgs[i].len; j++)
-+				pr_debug("%02X ", msgs[i].buf[j]);
-+		}
-+		pr_debug("\n");
-+	}
-+#endif
-+}
-+
-+static void ltq_i2c_release_bus(struct ltq_i2c *priv)
-+{
-+	if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+		i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+			   int num)
-+{
-+	struct ltq_i2c *priv = i2c_get_adapdata(adap);
-+	int ret;
-+
-+	dev_dbg(priv->dev, "xfer %u messages\n", num);
-+	dump_msgs(msgs, num, 0);
-+
-+	mutex_lock(&priv->mutex);
-+
-+	INIT_COMPLETION(priv->cmd_complete);
-+	priv->current_msg = msgs;
-+	priv->msgs_num = num;
-+	priv->msg_err = 0;
-+	priv->status = STATUS_IDLE;
-+
-+	/* wait for the bus to become ready */
-+	ret = ltq_i2c_wait_bus_not_busy(priv);
-+	if (ret)
-+		goto done;
-+
-+	while (priv->msgs_num) {
-+		/* start the transfers */
-+		ltq_i2c_xfer_init(priv);
-+
-+		/* wait for transfers to complete */
-+		ret = wait_for_completion_interruptible_timeout(
-+			&priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT);
-+		if (ret == 0) {
-+			dev_err(priv->dev, "controller timed out\n");
-+			ltq_i2c_hw_init(adap);
-+			ret = -ETIMEDOUT;
-+			goto done;
-+		} else if (ret < 0)
-+			goto done;
-+
-+		if (priv->msg_err) {
-+			if (priv->msg_err & LTQ_I2C_NACK)
-+				ret = -ENXIO;
-+			else
-+				ret = -EREMOTEIO;
-+			goto done;
-+		}
-+		if (--priv->msgs_num)
-+			priv->current_msg++;
-+	}
-+	/* no error? */
-+	ret = num;
-+
-+done:
-+	ltq_i2c_release_bus(priv);
-+
-+	mutex_unlock(&priv->mutex);
-+
-+	if (ret >= 0)
-+		dump_msgs(msgs, num, 1);
-+
-+	pr_debug("XFER ret %d\n", ret);
-+	return ret;
-+}
-+
-+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id)
-+{
-+	struct ltq_i2c *priv = dev_id;
-+	struct i2c_msg *msg = priv->current_msg;
-+	int last = (irq == priv->irq_lb);
-+
-+	if (last)
-+		pr_debug("LB ");
-+	else
-+		pr_debug("B ");
-+
-+	if (msg->flags & I2C_M_RD) {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("X");
-+			prepare_msg_send_addr(priv);
-+			disable_burst_irq(priv);
-+			break;
-+		case STATUS_READ:
-+		case STATUS_READ_END:
-+			pr_debug("R");
-+			ltq_i2c_rx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status R %d\n", priv->status);
-+			break;
-+		}
-+	} else {
-+		switch (priv->status) {
-+		case STATUS_ADDR:
-+			pr_debug("x");
-+			prepare_msg_send_addr(priv);
-+			break;
-+		case STATUS_WRITE:
-+			pr_debug("w");
-+			ltq_i2c_tx(priv, last);
-+			break;
-+		default:
-+			disable_burst_irq(priv);
-+			pr_warn("Status W %d\n", priv->status);
-+			break;
-+		}
-+	}
-+
-+	i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+	return IRQ_HANDLED;
-+}
-+
-+static void ltq_i2c_isr_prot(struct ltq_i2c *priv)
-+{
-+	u32 i_pro = i2c_r32(p_irqss);
-+
-+	pr_debug("i2c-p");
-+
-+	/* not acknowledge */
-+	if (i_pro & I2C_P_IRQSS_NACK) {
-+		priv->msg_err |= LTQ_I2C_NACK;
-+		pr_debug(" nack");
-+	}
-+
-+	/* arbitration lost */
-+	if (i_pro & I2C_P_IRQSS_AL) {
-+		priv->msg_err |= LTQ_I2C_ARB_LOST;
-+		pr_debug(" arb-lost");
-+	}
-+	/* tx -> rx switch */
-+	if (i_pro & I2C_P_IRQSS_RX)
-+		pr_debug(" rx");
-+
-+	/* tx end */
-+	if (i_pro & I2C_P_IRQSS_TX_END)
-+		pr_debug(" txend");
-+	pr_debug("\n");
-+
-+	if (!priv->msg_err) {
-+		/* tx -> rx switch */
-+		if (i_pro & I2C_P_IRQSS_RX) {
-+			priv->status = STATUS_READ;
-+			enable_burst_irq(priv);
-+		}
-+		if (i_pro & I2C_P_IRQSS_TX_END) {
-+			if (priv->status == STATUS_READ)
-+				priv->status = STATUS_READ_END;
-+			else {
-+				disable_burst_irq(priv);
-+				priv->status = STATUS_STOP;
-+			}
-+		}
-+	}
-+
-+	i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id)
-+{
-+	u32 i_raw, i_err = 0;
-+	struct ltq_i2c *priv = dev_id;
-+
-+	i_raw = i2c_r32(mis);
-+	pr_debug("i_raw 0x%08X\n", i_raw);
-+
-+	/* error interrupt */
-+	if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+		i_err = i2c_r32(err_irqss);
-+		pr_debug("i_err 0x%08X bus_stat 0x%04X\n",
-+			i_err, i2c_r32(bus_stat));
-+
-+		/* tx fifo overflow (8) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+			priv->msg_err |= LTQ_I2C_TX_OFL;
-+
-+		/* tx fifo underflow (4) */
-+		if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+			priv->msg_err |= LTQ_I2C_TX_UFL;
-+
-+		/* rx fifo overflow (2) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+			priv->msg_err |= LTQ_I2C_RX_OFL;
-+
-+		/* rx fifo underflow (1) */
-+		if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+			priv->msg_err |= LTQ_I2C_RX_UFL;
-+
-+		i2c_w32(i_err, err_irqsc);
-+	}
-+
-+	/* protocol interrupt */
-+	if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+		ltq_i2c_isr_prot(priv);
-+
-+	if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+		complete(&priv->cmd_complete);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u32 ltq_i2c_functionality(struct i2c_adapter *adap)
-+{
-+	return	I2C_FUNC_I2C |
-+		I2C_FUNC_10BIT_ADDR |
-+		I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm ltq_i2c_algorithm = {
-+	.master_xfer	= ltq_i2c_xfer,
-+	.functionality	= ltq_i2c_functionality,
-+};
-+
-+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct ltq_i2c *priv;
-+	struct i2c_adapter *adap;
-+	struct resource *mmres, irqres[4];
-+	int ret = 0;
-+
-+	dev_dbg(&pdev->dev, "probing\n");
-+
-+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	ret = of_irq_to_resource_table(node, irqres, 4);
-+	if (!mmres || (ret != 4)) {
-+		dev_err(&pdev->dev, "no resources\n");
-+		return -ENODEV;
-+	}
-+
-+	/* allocate private data */
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv) {
-+		dev_err(&pdev->dev, "can't allocate private data\n");
-+		return -ENOMEM;
-+	}
-+
-+	adap = &priv->adap;
-+	i2c_set_adapdata(adap, priv);
-+	adap->owner = THIS_MODULE;
-+	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+	strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+	adap->algo = &ltq_i2c_algorithm;
-+
-+	if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
-+		dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
-+		priv->i2c_clock = 100000;
-+	}
-+
-+	init_completion(&priv->cmd_complete);
-+	mutex_init(&priv->mutex);
-+
-+	priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
-+	if (priv->membase == NULL)
-+		return -ENOMEM;
-+
-+	priv->dev = &pdev->dev;
-+	priv->irq_lb = irqres[0].start;
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst,
-+		IRQF_DISABLED, "i2c lb", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+			irqres[0].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst,
-+		IRQF_DISABLED, "i2c b", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+			irqres[1].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr,
-+		IRQF_DISABLED, "i2c err", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+			irqres[2].start);
-+		return -ENODEV;
-+	}
-+
-+	ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr,
-+		IRQF_DISABLED, "i2c p", priv);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+			irqres[3].start);
-+		return -ENODEV;
-+	}
-+
-+	dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+	dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start,
-+		irqres[1].start, irqres[2].start, irqres[3].start);
-+
-+	priv->clk_gate = devm_clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_gate)) {
-+		dev_err(&pdev->dev, "failed to get i2c clk\n");
-+		return -ENOENT;
-+	}
-+
-+	/* this is a static clock, which has no refcounting */
-+	priv->clk_input = clk_get_fpi();
-+	if (IS_ERR(priv->clk_input)) {
-+		dev_err(&pdev->dev, "failed to get fpi clk\n");
-+		return -ENOENT;
-+	}
-+
-+	clk_activate(priv->clk_gate);
-+
-+	/* add our adapter to the i2c stack */
-+	ret = i2c_add_numbered_adapter(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't register I2C adapter\n");
-+		goto out;
-+	}
-+
-+	platform_set_drvdata(pdev, priv);
-+	i2c_set_adapdata(adap, priv);
-+
-+	/* print module version information */
-+	dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+		(i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+		(i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+	/* initialize HW */
-+	ret = ltq_i2c_hw_init(adap);
-+	if (ret) {
-+		dev_err(&pdev->dev, "can't configure adapter\n");
-+		i2c_del_adapter(adap);
-+		platform_set_drvdata(pdev, NULL);
-+	} else {
-+		dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+	}
-+
-+	of_i2c_register_devices(adap);
-+
-+out:
-+	/* if init failed, we need to deactivate the clock gate */
-+	if (ret)
-+		clk_deactivate(priv->clk_gate);
-+
-+	return ret;
-+}
-+
-+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
-+{
-+	struct ltq_i2c *priv = platform_get_drvdata(pdev);
-+
-+	/* disable bus */
-+	i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+	/* power down the core */
-+	clk_deactivate(priv->clk_gate);
-+
-+	/* remove driver */
-+	i2c_del_adapter(&priv->adap);
-+	kfree(priv);
-+
-+	dev_dbg(&pdev->dev, "removed\n");
-+	platform_set_drvdata(pdev, NULL);
-+
-+	return 0;
-+}
-+static const struct of_device_id ltq_i2c_match[] = {
-+	{ .compatible = "lantiq,lantiq-i2c" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_i2c_match);
-+
-+static struct platform_driver ltq_i2c_driver = {
-+	.probe	= ltq_i2c_probe,
-+	.remove	= __devexit_p(ltq_i2c_remove),
-+	.driver	= {
-+		.name	= DRV_NAME,
-+		.owner	= THIS_MODULE,
-+		.of_match_table = ltq_i2c_match,
-+	},
-+};
-+
-+module_platform_driver(ltq_i2c_driver);
-+
-+MODULE_DESCRIPTION("Lantiq I2C bus adapter");
-+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-lantiq.h
-@@ -0,0 +1,234 @@
-+#ifndef I2C_LANTIQ_H
-+#define I2C_LANTIQ_H
-+
-+/* I2C register structure */
-+struct lantiq_reg_i2c {
-+	/* I2C Kernel Clock Control Register */
-+	unsigned int clc; /* 0x00000000 */
-+	/* Reserved */
-+	unsigned int res_0; /* 0x00000004 */
-+	/* I2C Identification Register */
-+	unsigned int id; /* 0x00000008 */
-+	/* Reserved */
-+	unsigned int res_1; /* 0x0000000C */
-+	/*
-+	 * I2C RUN Control Register
-+	 * This register enables and disables the I2C peripheral. Before
-+	 * enabling, the I2C has to be configured properly. After enabling
-+	 * no configuration is possible
-+	 */
-+	unsigned int run_ctrl; /* 0x00000010 */
-+	/*
-+	 * I2C End Data Control Register
-+	 * This register is used to either turn around the data transmission
-+	 * direction or to address another slave without sending a stop
-+	 * condition. Also the software can stop the slave-transmitter by
-+	 * sending a not-accolade when working as master-receiver or even
-+	 * stop data transmission immediately when operating as
-+	 * master-transmitter. The writing to the bits of this control
-+	 * register is only effective when in MASTER RECEIVES BYTES, MASTER
-+	 * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+	 */
-+	unsigned int endd_ctrl; /* 0x00000014 */
-+	/*
-+	 * I2C Fractional Divider Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_HIGH_CFG has
-+	 * the same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_cfg; /* 0x00000018 */
-+	/*
-+	 * I2C Fractional Divider (highspeed mode) Configuration Register
-+	 * These register is used to program the fractional divider of the I2C
-+	 * bus. Before the peripheral is switched on by setting the RUN-bit the
-+	 * two (fixed) values for the two operating frequencies are programmed
-+	 * into these (configuration) registers. The Register FDIV_CFG has the
-+	 * same layout as I2C_FDIV_CFG.
-+	 */
-+	unsigned int fdiv_high_cfg; /* 0x0000001C */
-+	/* I2C Address Configuration Register */
-+	unsigned int addr_cfg; /* 0x00000020 */
-+	/* I2C Bus Status Register
-+	 * This register gives a status information of the I2C. This additional
-+	 * information can be used by the software to start proper actions.
-+	 */
-+	unsigned int bus_stat; /* 0x00000024 */
-+	/* I2C FIFO Configuration Register */
-+	unsigned int fifo_cfg; /* 0x00000028 */
-+	/* I2C Maximum Received Packet Size Register */
-+	unsigned int mrps_ctrl; /* 0x0000002C */
-+	/* I2C Received Packet Size Status Register */
-+	unsigned int rps_stat; /* 0x00000030 */
-+	/* I2C Transmit Packet Size Register */
-+	unsigned int tps_ctrl; /* 0x00000034 */
-+	/* I2C Filled FIFO Stages Status Register */
-+	unsigned int ffs_stat; /* 0x00000038 */
-+	/* Reserved */
-+	unsigned int res_2; /* 0x0000003C */
-+	/* I2C Timing Configuration Register */
-+	unsigned int tim_cfg; /* 0x00000040 */
-+	/* Reserved */
-+	unsigned int res_3[7]; /* 0x00000044 */
-+	/* I2C Error Interrupt Request Source Mask Register */
-+	unsigned int err_irqsm; /* 0x00000060 */
-+	/* I2C Error Interrupt Request Source Status Register */
-+	unsigned int err_irqss; /* 0x00000064 */
-+	/* I2C Error Interrupt Request Source Clear Register */
-+	unsigned int err_irqsc; /* 0x00000068 */
-+	/* Reserved */
-+	unsigned int res_4; /* 0x0000006C */
-+	/* I2C Protocol Interrupt Request Source Mask Register */
-+	unsigned int p_irqsm; /* 0x00000070 */
-+	/* I2C Protocol Interrupt Request Source Status Register */
-+	unsigned int p_irqss; /* 0x00000074 */
-+	/* I2C Protocol Interrupt Request Source Clear Register */
-+	unsigned int p_irqsc; /* 0x00000078 */
-+	/* Reserved */
-+	unsigned int res_5; /* 0x0000007C */
-+	/* I2C Raw Interrupt Status Register */
-+	unsigned int ris; /* 0x00000080 */
-+	/* I2C Interrupt Mask Control Register */
-+	unsigned int imsc; /* 0x00000084 */
-+	/* I2C Masked Interrupt Status Register */
-+	unsigned int mis; /* 0x00000088 */
-+	/* I2C Interrupt Clear Register */
-+	unsigned int icr; /* 0x0000008C */
-+	/* I2C Interrupt Set Register */
-+	unsigned int isr; /* 0x00000090 */
-+	/* I2C DMA Enable Register */
-+	unsigned int dmae; /* 0x00000094 */
-+	/* Reserved */
-+	unsigned int res_6[8154]; /* 0x00000098 */
-+	/* I2C Transmit Data Register */
-+	unsigned int txd; /* 0x00008000 */
-+	/* Reserved */
-+	unsigned int res_7[4095]; /* 0x00008004 */
-+	/* I2C Receive Data Register */
-+	unsigned int rxd; /* 0x0000C000 */
-+	/* Reserved */
-+	unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/*
-+ * Clock Divider for Normal Run Mode
-+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long
-+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx
-+ * on reading.
-+ */
-+#define I2C_CLC_RMC_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+
-+/* Fields of "I2C Identification Register" */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+
-+/* Fields of "I2C Interrupt Mask Control Register" */
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+
-+/* Fields of "I2C Error Interrupt Request Source Status Register" */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* Fields of "I2C Raw Interrupt Status Register" */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+
-+/* Fields of "I2C FIFO Configuration Register" */
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+/* Stop on Packet End Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Stop on Not Acknowledge Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* Fields of "I2C Interrupt Clear Register" */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* Fields of "I2C Fractional Divider Configuration Register" */
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* Fields of "I2C Bus Status Register" */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* Read from I2C Bus. */
-+#define I2C_BUS_STAT_RNW_READ 0x00000004
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control on the
-+ * I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* Fields of "I2C RUN Control Register" */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* Fields of "I2C End Data Control Register" */
-+/*
-+ * Set End of Transmission
-+ * Note:Do not write '1' to this bit when bus is free. This will cause an
-+ * abort after the first byte when a new transfer is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+
-+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+
-+
-+#endif /* I2C_LANTIQ_H */
diff --git a/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
deleted file mode 100644
index bcbebfa..0000000
--- a/target/linux/lantiq/patches-3.8/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ /dev/null
@@ -1,1421 +0,0 @@
-From fbfdf78ba827a8f854ae3ed7b11ea6df4054ffb1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 25/40] NET: MIPS: lantiq: adds xrx200-net
-
----
- drivers/net/ethernet/Kconfig         |    8 +-
- drivers/net/ethernet/Makefile        |    1 +
- drivers/net/ethernet/lantiq_pce.h    |  163 +++++
- drivers/net/ethernet/lantiq_xrx200.c | 1203 ++++++++++++++++++++++++++++++++++
- 4 files changed, 1374 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
-
-Index: linux-3.8.13/drivers/net/ethernet/Kconfig
-===================================================================
---- linux-3.8.13.orig/drivers/net/ethernet/Kconfig	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/drivers/net/ethernet/Kconfig	2013-06-28 17:46:34.521054618 +0200
-@@ -83,7 +83,13 @@
- 	tristate "Lantiq SoC ETOP driver"
- 	depends on SOC_TYPE_XWAY
- 	---help---
--	  Support for the MII0 inside the Lantiq SoC
-+	  Support for the MII0 inside the Lantiq ADSL SoC
-+
-+config LANTIQ_XRX200
-+	tristate "Lantiq SoC XRX200 driver"
-+	depends on SOC_TYPE_XWAY
-+	---help---
-+	  Support for the MII0 inside the Lantiq VDSL SoC
- 
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
-Index: linux-3.8.13/drivers/net/ethernet/Makefile
-===================================================================
---- linux-3.8.13.orig/drivers/net/ethernet/Makefile	2013-05-11 22:57:46.000000000 +0200
-+++ linux-3.8.13/drivers/net/ethernet/Makefile	2013-06-28 17:46:34.521054618 +0200
-@@ -36,6 +36,7 @@
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
-Index: linux-3.8.13/drivers/net/ethernet/lantiq_pce.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/drivers/net/ethernet/lantiq_pce.h	2013-06-28 17:46:34.525054619 +0200
-@@ -0,0 +1,163 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify it
-+ *   under the terms of the GNU General Public License version 2 as published
-+ *   by the Free Software Foundation.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2010 Lantiq Deutschland GmbH
-+ *   Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *   PCE microcode extracted from UGW5.2 switch api
-+ */
-+
-+/* Switch API Micro Code V0.3 */
-+enum {
-+	OUT_MAC0 = 0,
-+	OUT_MAC1,
-+	OUT_MAC2,
-+	OUT_MAC3,
-+	OUT_MAC4,
-+	OUT_MAC5,
-+	OUT_ETHTYP,
-+	OUT_VTAG0,
-+	OUT_VTAG1,
-+	OUT_ITAG0,
-+	OUT_ITAG1,	/*10 */
-+	OUT_ITAG2,
-+	OUT_ITAG3,
-+	OUT_IP0,
-+	OUT_IP1,
-+	OUT_IP2,
-+	OUT_IP3,
-+	OUT_SIP0,
-+	OUT_SIP1,
-+	OUT_SIP2,
-+	OUT_SIP3,	/*20*/
-+	OUT_SIP4,
-+	OUT_SIP5,
-+	OUT_SIP6,
-+	OUT_SIP7,
-+	OUT_DIP0,
-+	OUT_DIP1,
-+	OUT_DIP2,
-+	OUT_DIP3,
-+	OUT_DIP4,
-+	OUT_DIP5,	/*30*/
-+	OUT_DIP6,
-+	OUT_DIP7,
-+	OUT_SESID,
-+	OUT_PROT,
-+	OUT_APP0,
-+	OUT_APP1,
-+	OUT_IGMP0,
-+	OUT_IGMP1,
-+	OUT_IPOFF,	/*39*/
-+	OUT_NONE =  63
-+};
-+
-+/* parser's microcode length type */
-+#define INSTR		0
-+#define IPV6		1
-+#define LENACCU		2
-+
-+/* parser's microcode flag type */
-+enum {
-+	FLAG_ITAG =  0,
-+	FLAG_VLAN,
-+	FLAG_SNAP,
-+	FLAG_PPPOE,
-+	FLAG_IPV6,
-+	FLAG_IPV6FL,
-+	FLAG_IPV4,
-+	FLAG_IGMP,
-+	FLAG_TU,
-+	FLAG_HOP,
-+	FLAG_NN1,	/*10 */
-+	FLAG_NN2,
-+	FLAG_END,
-+	FLAG_NO,	/*13*/
-+};
-+
-+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
-+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
-+	{ {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
-+struct pce_microcode {
-+	unsigned short val[4];
-+/*	unsigned short val_2;
-+	unsigned short val_1;
-+	unsigned short val_0;*/
-+} pce_microcode[] = {
-+	/*      value    mask    ns  fields      L  type     flags       ipv4_len */
-+	MC_ENTRY(0x88c3, 0xFFFF,  1, OUT_ITAG0,  4, INSTR,   FLAG_ITAG,  0),
-+	MC_ENTRY(0x8100, 0xFFFF,  2, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x88A8, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x8100, 0xFFFF,  1, OUT_VTAG0,  2, INSTR,   FLAG_VLAN,  0),
-+	MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE,   0, INSTR,   FLAG_SNAP,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7,   3, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7,   3, INSTR,   FLAG_PPPOE, 0),
-+	MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0,    4, INSTR,   FLAG_IPV4,  1),
-+	MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0,    3, INSTR,   FLAG_IPV6,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3,    2, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0,   4, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE,   0, LENACCU, FLAG_NO,    0),
-+	MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_HOP,   0),
-+	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN1,   0),
-+	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3,   17, INSTR,   FLAG_NN2,   0),
-+	MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT,   1, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_HOP,   0),
-+	MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN1,   0),
-+	MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE,   0, IPV6,    FLAG_NN2,   0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT,   1, IPV6,    FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0,  16, INSTR,   FLAG_NO,    0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0,   4, INSTR,   FLAG_IGMP,  0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+	MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE,   0, INSTR,   FLAG_END,   0),
-+};
-Index: linux-3.8.13/drivers/net/ethernet/lantiq_xrx200.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/drivers/net/ethernet/lantiq_xrx200.c	2013-06-29 18:09:53.932157475 +0200
-@@ -0,0 +1,1203 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify it
-+ *   under the terms of the GNU General Public License version 2 as published
-+ *   by the Free Software Foundation.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2010 Lantiq Deutschland
-+ *   Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/etherdevice.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <asm/delay.h>
-+
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_gpio.h>
-+
-+#include <xway_dma.h>
-+#include <lantiq_soc.h>
-+
-+#include "lantiq_pce.h"
-+
-+#define SW_POLLING
-+#define SW_ROUTING
-+#define SW_PORTMAP
-+
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+#define XRX200_MAX_DEV		2
-+  #else
-+#define XRX200_MAX_DEV		2
-+  #endif
-+#else
-+#define XRX200_MAX_DEV		1
-+#endif
-+
-+#define XRX200_MAX_PORT		7
-+#define XRX200_MAX_DMA		8
-+
-+#define XRX200_HEADROOM		4
-+
-+#define XRX200_TX_TIMEOUT	(10 * HZ)
-+
-+/* port type */
-+#define XRX200_PORT_TYPE_PHY	1
-+#define XRX200_PORT_TYPE_MAC	2
-+
-+/* DMA */
-+#define XRX200_DMA_CRC_LEN	0x4
-+#define XRX200_DMA_DATA_LEN	0x600
-+#define XRX200_DMA_IRQ		INT_NUM_IM2_IRL0
-+#define XRX200_DMA_RX		0
-+#define XRX200_DMA_TX		1
-+#define XRX200_DMA_IS_TX(x)	(x%2)
-+#define XRX200_DMA_IS_RX(x)	(!XRX200_DMA_IS_TX(x))
-+
-+/* fetch / store dma */
-+#define FDMA_PCTRL0		0x2A00
-+#define FDMA_PCTRLx(x)		(FDMA_PCTRL0 + (x * 0x18))
-+#define SDMA_PCTRL0		0x2F00
-+#define SDMA_PCTRLx(x)		(SDMA_PCTRL0 + (x * 0x18))
-+
-+/* buffer management */
-+#define BM_PCFG0		0x200
-+#define BM_PCFGx(x)		(BM_PCFG0 + (x * 8))
-+
-+/* MDIO */
-+#define MDIO_GLOB		0x0000
-+#define MDIO_CTRL		0x0020
-+#define MDIO_READ		0x0024
-+#define MDIO_WRITE		0x0028
-+#define MDIO_PHY0		0x0054
-+#define MDIO_PHY(x)		(0x0054 - (x * sizeof(unsigned)))
-+#define MDIO_CLK_CFG0		0x002C
-+#define MDIO_CLK_CFG1		0x0030
-+
-+#define MDIO_GLOB_ENABLE	0x8000
-+#define MDIO_BUSY		BIT(12)
-+#define MDIO_RD			BIT(11)
-+#define MDIO_WR			BIT(10)
-+#define MDIO_MASK		0x1f
-+#define MDIO_ADDRSHIFT		5
-+#define MDIO1_25MHZ		9
-+
-+#define MDIO_PHY_LINK_DOWN	0x4000
-+#define MDIO_PHY_LINK_UP	0x2000
-+
-+#define MDIO_PHY_SPEED_M10	0x0000
-+#define MDIO_PHY_SPEED_M100	0x0800
-+#define MDIO_PHY_SPEED_G1	0x1000
-+
-+#define MDIO_PHY_FDUP_EN	0x0600
-+#define MDIO_PHY_FDUP_DIS	0x0200
-+
-+#define MDIO_PHY_LINK_MASK	0x6000
-+#define MDIO_PHY_SPEED_MASK	0x1800
-+#define MDIO_PHY_FDUP_MASK	0x0600
-+#define MDIO_PHY_ADDR_MASK	0x001f
-+#define MDIO_UPDATE_MASK	MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
-+					MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
-+
-+/* MII */
-+#define MII_CFG(p)		(p * 8)
-+
-+#define MII_CFG_EN		BIT(14)
-+
-+#define MII_CFG_MODE_MIIP	0x0
-+#define MII_CFG_MODE_MIIM	0x1
-+#define MII_CFG_MODE_RMIIP	0x2
-+#define MII_CFG_MODE_RMIIM	0x3
-+#define MII_CFG_MODE_RGMII	0x4
-+#define MII_CFG_MODE_MASK	0xf
-+
-+#define MII_CFG_RATE_M2P5	0x00
-+#define MII_CFG_RATE_M25	0x10
-+#define MII_CFG_RATE_M125	0x20
-+#define MII_CFG_RATE_M50	0x30
-+#define MII_CFG_RATE_AUTO	0x40
-+#define MII_CFG_RATE_MASK	0x70
-+
-+/* cpu port mac */
-+#define PMAC_HD_CTL		0x0000
-+#define PMAC_RX_IPG		0x0024
-+#define PMAC_EWAN		0x002c
-+
-+#define PMAC_IPG_MASK		0xf
-+#define PMAC_HD_CTL_AS		0x0008
-+#define PMAC_HD_CTL_AC		0x0004
-+#define PMAC_HD_CTL_RXSH	0x0040
-+#define PMAC_HD_CTL_AST		0x0080
-+#define PMAC_HD_CTL_RST		0x0100
-+
-+/* PCE */
-+#define PCE_TBL_KEY(x)		(0x1100 + ((7 - x) * 4))
-+#define PCE_TBL_MASK		0x1120
-+#define PCE_TBL_VAL(x)		(0x1124 + ((4 - x) * 4))
-+#define PCE_TBL_ADDR		0x1138
-+#define PCE_TBL_CTRL		0x113c
-+#define PCE_PMAP1		0x114c
-+#define PCE_PMAP2		0x1150
-+#define PCE_PMAP3		0x1154
-+#define PCE_GCTRL_REG(x)	(0x1158 + (x * 4))
-+#define PCE_PCTRL_REG(p, x)	(0x1200 + (((p * 0xa) + x) * 4))
-+
-+#define PCE_TBL_BUSY		BIT(15)
-+#define PCE_TBL_CFG_ADDR_MASK	0x1f
-+#define PCE_TBL_CFG_ADWR	0x20
-+#define PCE_TBL_CFG_ADWR_MASK	0x60
-+#define PCE_INGRESS		BIT(11)
-+
-+/* MAC */
-+#define MAC_FLEN_REG		(0x2314)
-+#define MAC_CTRL_REG(p, x)	(0x240c + (((p * 0xc) + x) * 4))
-+
-+/* buffer management */
-+#define BM_PCFG(p)		(0x200 + (p * 8))
-+
-+/* special tag in TX path header */
-+#define SPID_SHIFT		24
-+#define DPID_SHIFT		16
-+#define DPID_ENABLE		1
-+#define SPID_CPU_PORT		2
-+#define PORT_MAP_SEL		BIT(15)
-+#define PORT_MAP_EN		BIT(14)
-+#define PORT_MAP_SHIFT		1
-+#define PORT_MAP_MASK		0x3f
-+
-+#define SPPID_MASK		0x7
-+#define SPPID_SHIFT		4
-+
-+/* MII regs not yet in linux */
-+#define MDIO_DEVAD_NONE		(-1)
-+#define ADVERTIZE_MPD		(1 << 10)
-+
-+struct xrx200_port {
-+	u8 num;
-+	u8 phy_addr;
-+	u16 flags;
-+	phy_interface_t phy_if;
-+
-+	int link;
-+	int gpio;
-+	enum of_gpio_flags gpio_flags;
-+
-+	struct phy_device *phydev;
-+	struct device_node *phy_node;
-+};
-+
-+struct xrx200_chan {
-+	int idx;
-+	int refcount;
-+	int tx_free;
-+
-+	struct net_device dummy_dev;
-+	struct net_device *devs[XRX200_MAX_DEV];
-+
-+	struct tasklet_struct tasklet;
-+	struct napi_struct napi;
-+	struct ltq_dma_channel dma;
-+	struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct xrx200_hw {
-+	struct clk *clk;
-+	struct mii_bus *mii_bus;
-+
-+	struct xrx200_chan chan[XRX200_MAX_DMA];
-+
-+	struct net_device *devs[XRX200_MAX_DEV];
-+	int num_devs;
-+
-+	int port_map[XRX200_MAX_PORT];
-+	unsigned short wan_map;
-+
-+	spinlock_t lock;
-+};
-+
-+struct xrx200_priv {
-+	struct net_device_stats stats;
-+	int id;
-+
-+	struct xrx200_port port[XRX200_MAX_PORT];
-+	int num_port;
-+	int wan;
-+	unsigned short port_map;
-+	const void *mac;
-+
-+	struct xrx200_hw *hw;
-+};
-+
-+static __iomem void *xrx200_switch_membase;
-+static __iomem void *xrx200_mii_membase;
-+static __iomem void *xrx200_mdio_membase;
-+static __iomem void *xrx200_pmac_membase;
-+
-+#define ltq_switch_r32(x)	ltq_r32(xrx200_switch_membase + (x))
-+#define ltq_switch_w32(x, y)	ltq_w32(x, xrx200_switch_membase + (y))
-+#define ltq_switch_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_switch_membase + (z))
-+
-+#define ltq_mdio_r32(x)		ltq_r32(xrx200_mdio_membase + (x))
-+#define ltq_mdio_w32(x, y)	ltq_w32(x, xrx200_mdio_membase + (y))
-+#define ltq_mdio_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
-+
-+#define ltq_mii_r32(x)		ltq_r32(xrx200_mii_membase + (x))
-+#define ltq_mii_w32(x, y)	ltq_w32(x, xrx200_mii_membase + (y))
-+#define ltq_mii_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_mii_membase + (z))
-+
-+#define ltq_pmac_r32(x)		ltq_r32(xrx200_pmac_membase + (x))
-+#define ltq_pmac_w32(x, y)	ltq_w32(x, xrx200_pmac_membase + (y))
-+#define ltq_pmac_w32_mask(x, y, z) \
-+			ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
-+
-+static int xrx200_open(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	unsigned long flags;
-+	int i;
-+
-+	for (i = 0; i < XRX200_MAX_DMA; i++) {
-+		if (!priv->hw->chan[i].dma.irq)
-+			continue;
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		if (!priv->hw->chan[i].refcount) {
-+			if (XRX200_DMA_IS_RX(i))
-+				napi_enable(&priv->hw->chan[i].napi);
-+			ltq_dma_open(&priv->hw->chan[i].dma);
-+		}
-+		priv->hw->chan[i].refcount++;
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+	for (i = 0; i < priv->num_port; i++)
-+		if (priv->port[i].phydev)
-+			phy_start(priv->port[i].phydev);
-+	netif_start_queue(dev);
-+
-+	return 0;
-+}
-+
-+static int xrx200_close(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	unsigned long flags;
-+	int i;
-+
-+	netif_stop_queue(dev);
-+
-+	for (i = 0; i < priv->num_port; i++)
-+		if (priv->port[i].phydev)
-+			phy_stop(priv->port[i].phydev);
-+
-+	for (i = 0; i < XRX200_MAX_DMA; i++) {
-+		if (!priv->hw->chan[i].dma.irq)
-+			continue;
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		priv->hw->chan[i].refcount--;
-+		if (!priv->hw->chan[i].refcount) {
-+			if (XRX200_DMA_IS_RX(i))
-+				napi_disable(&priv->hw->chan[i].napi);
-+			ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
-+		}
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+
-+	return 0;
-+}
-+
-+static int xrx200_alloc_skb(struct xrx200_chan *ch)
-+{
-+#define DMA_PAD	(NET_IP_ALIGN + NET_SKB_PAD)
-+	ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
-+	if (!ch->skb[ch->dma.desc])
-+		return -ENOMEM;
-+
-+	skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
-+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+		ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
-+			DMA_FROM_DEVICE);
-+	ch->dma.desc_base[ch->dma.desc].addr =
-+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+	ch->dma.desc_base[ch->dma.desc].ctl =
-+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+		XRX200_DMA_DATA_LEN;
-+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+
-+	return 0;
-+}
-+
-+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
-+{
-+	struct net_device *dev = ch->devs[id];
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+	struct sk_buff *skb = ch->skb[ch->dma.desc];
-+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - XRX200_DMA_CRC_LEN;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&priv->hw->lock, flags);
-+	if (xrx200_alloc_skb(ch)) {
-+		netdev_err(dev,
-+			"failed to allocate new rx buffer, stopping DMA\n");
-+		ltq_dma_close(&ch->dma);
-+	}
-+
-+	ch->dma.desc++;
-+	ch->dma.desc %= LTQ_DESC_NUM;
-+	spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+	skb_put(skb, len);
-+#ifdef SW_ROUTING
-+	skb_pull(skb, 8);
-+#endif
-+	skb->dev = dev;
-+	skb->protocol = eth_type_trans(skb, dev);
-+	netif_receive_skb(skb);
-+	priv->stats.rx_packets++;
-+	priv->stats.rx_bytes+=len;
-+}
-+
-+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+	struct xrx200_chan *ch = container_of(napi,
-+				struct xrx200_chan, napi);
-+	struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
-+	int rx = 0;
-+	int complete = 0;
-+	unsigned long flags;
-+
-+	while ((rx < budget) && !complete) {
-+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+#ifdef SW_ROUTING
-+			struct sk_buff *skb = ch->skb[ch->dma.desc];
-+			u32 *special_tag = (u32*)skb->data;
-+			int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
-+			xrx200_hw_receive(ch, priv->hw->port_map[port]);
-+#else
-+			xrx200_hw_receive(ch, 0);
-+#endif
-+			rx++;
-+		} else {
-+			complete = 1;
-+		}
-+	}
-+	if (complete || !rx) {
-+		napi_complete(&ch->napi);
-+		spin_lock_irqsave(&priv->hw->lock, flags);
-+		ltq_dma_ack_irq(&ch->dma);
-+		spin_unlock_irqrestore(&priv->hw->lock, flags);
-+	}
-+	return rx;
-+}
-+
-+static void xrx200_tx_housekeeping(unsigned long ptr)
-+{
-+	struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
-+	struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+	while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
-+		ch->skb[ch->tx_free] = NULL;
-+		memset(&ch->dma.desc_base[ch->tx_free], 0,
-+			sizeof(struct ltq_dma_desc));
-+		ch->tx_free++;
-+		ch->tx_free %= LTQ_DESC_NUM;
-+	}
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) {
-+		struct netdev_queue *txq =
-+			netdev_get_tx_queue(ch->devs[i], 0);
-+		if (netif_tx_queue_stopped(txq))
-+			netif_tx_start_queue(txq);
-+	}
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+	ltq_dma_ack_irq(&ch->dma);
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+}
-+
-+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+
-+	return &priv->stats;
-+}
-+
-+static void xrx200_tx_timeout(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+
-+	printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
-+
-+	priv->stats.tx_errors++;
-+	netif_wake_queue(dev);
-+}
-+
-+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	int queue = skb_get_queue_mapping(skb);
-+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
-+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+	unsigned long flags;
-+	u32 byte_offset;
-+	int len;
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
-+  #else
-+	u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
-+  #endif
-+#endif
-+
-+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+		netdev_err(dev, "tx ring full\n");
-+		netif_tx_stop_queue(txq);
-+		return NETDEV_TX_BUSY;
-+	}
-+#ifdef SW_ROUTING
-+  #ifdef SW_PORTMAP
-+	special_tag |= priv->port_map << PORT_MAP_SHIFT;
-+  #else
-+	if(priv->id)
-+		special_tag |= (1 << DPID_SHIFT);
-+  #endif
-+	if(skb_headroom(skb) < 4) {
-+		struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
-+		dev_kfree_skb_any(skb);
-+		skb = tmp;
-+	}
-+	skb_push(skb, 4);
-+	memcpy(skb->data, &special_tag, sizeof(u32));
-+	len += 4;
-+#endif
-+
-+	/* dma needs to start on a 16 byte aligned address */
-+	byte_offset = CPHYSADDR(skb->data) % 16;
-+	ch->skb[ch->dma.desc] = skb;
-+
-+	dev->trans_start = jiffies;
-+
-+	spin_lock_irqsave(&priv->hw->lock, flags);
-+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+						DMA_TO_DEVICE)) - byte_offset;
-+	wmb();
-+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+	ch->dma.desc++;
-+	ch->dma.desc %= LTQ_DESC_NUM;
-+	spin_unlock_irqrestore(&priv->hw->lock, flags);
-+
-+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+		netif_tx_stop_queue(txq);
-+
-+	priv->stats.tx_packets++;
-+	priv->stats.tx_bytes+=len;
-+
-+	return NETDEV_TX_OK;
-+}
-+
-+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
-+{
-+	struct xrx200_hw *hw = priv;
-+	int ch = irq - XRX200_DMA_IRQ;
-+
-+	if (ch % 2)
-+		tasklet_schedule(&hw->chan[ch].tasklet);
-+	else
-+		napi_schedule(&hw->chan[ch].napi);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int xrx200_dma_init(struct xrx200_hw *hw)
-+{
-+	int i, err = 0;
-+
-+	ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+	for (i = 0; i < 8 && !err; i++) {
-+		int irq = XRX200_DMA_IRQ + i;
-+		struct xrx200_chan *ch = &hw->chan[i];
-+
-+		ch->idx = ch->dma.nr = i;
-+
-+		if (i == XRX200_DMA_TX) {
-+			ltq_dma_alloc_tx(&ch->dma);
-+			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
-+		} else if (i == XRX200_DMA_RX) {
-+			ltq_dma_alloc_rx(&ch->dma);
-+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+					ch->dma.desc++)
-+				if (xrx200_alloc_skb(ch))
-+					err = -ENOMEM;
-+			ch->dma.desc = 0;
-+			err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
-+		} else
-+			continue;
-+
-+		if (!err)
-+			ch->dma.irq = irq;
-+	}
-+
-+	return err;
-+}
-+
-+#ifdef SW_POLLING
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+	u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
-+	u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
-+	u16 miirate = 0;
-+
-+	switch (port->phydev->speed) {
-+	case SPEED_1000:
-+		phyaddr |= MDIO_PHY_SPEED_G1;
-+		miirate = MII_CFG_RATE_M125;
-+		break;
-+
-+	case SPEED_100:
-+		phyaddr |= MDIO_PHY_SPEED_M100;
-+		switch (miimode) {
-+		case MII_CFG_MODE_RMIIM:
-+		case MII_CFG_MODE_RMIIP:
-+			miirate = MII_CFG_RATE_M50;
-+			break;
-+		default:
-+			miirate = MII_CFG_RATE_M25;
-+			break;
-+		}
-+		break;
-+
-+	default:
-+		phyaddr |= MDIO_PHY_SPEED_M10;
-+		miirate = MII_CFG_RATE_M2P5;
-+		break;
-+	}
-+
-+	if (port->phydev->link)
-+		phyaddr |= MDIO_PHY_LINK_UP;
-+	else
-+		phyaddr |= MDIO_PHY_LINK_DOWN;
-+
-+	if (port->phydev->duplex == DUPLEX_FULL)
-+		phyaddr |= MDIO_PHY_FDUP_EN;
-+	else
-+		phyaddr |= MDIO_PHY_FDUP_DIS;
-+
-+	ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
-+	ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
-+	udelay(1);
-+}
-+#else
-+static void xrx200_gmac_update(struct xrx200_port *port)
-+{
-+
-+}
-+#endif
-+
-+static void xrx200_mdio_link(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	int i;
-+
-+	for (i = 0; i < priv->num_port; i++) {
-+		if (!priv->port[i].phydev)
-+			continue;
-+
-+		if (priv->port[i].link != priv->port[i].phydev->link) {
-+			xrx200_gmac_update(&priv->port[i]);
-+			priv->port[i].link = priv->port[i].phydev->link;
-+			netdev_info(dev, "port %d %s link\n",
-+				priv->port[i].num,
-+				(priv->port[i].link)?("got"):("lost"));
-+		}
-+	}
-+}
-+
-+static inline int xrx200_mdio_poll(struct mii_bus *bus)
-+{
-+	unsigned cnt = 10000;
-+
-+	while (likely(cnt--)) {
-+		unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
-+		if ((ctrl & MDIO_BUSY) == 0)
-+			return 0;
-+	}
-+
-+	return 1;
-+}
-+
-+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
-+{
-+	if (xrx200_mdio_poll(bus))
-+		return 1;
-+
-+	ltq_mdio_w32(val, MDIO_WRITE);
-+	ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
-+		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+		(reg & MDIO_MASK),
-+		MDIO_CTRL);
-+
-+	return 0;
-+}
-+
-+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
-+{
-+	if (xrx200_mdio_poll(bus))
-+		return -1;
-+
-+	ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
-+		((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
-+		(reg & MDIO_MASK),
-+		MDIO_CTRL);
-+
-+	if (xrx200_mdio_poll(bus))
-+		return -1;
-+
-+	return ltq_mdio_r32(MDIO_READ);
-+}
-+
-+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct phy_device *phydev = NULL;
-+	unsigned val;
-+
-+	phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
-+
-+	if (!phydev) {
-+		netdev_err(dev, "no PHY found\n");
-+		return -ENODEV;
-+	}
-+
-+	phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
-+				0, port->phy_if);
-+
-+	if (IS_ERR(phydev)) {
-+		netdev_err(dev, "Could not attach to PHY\n");
-+		return PTR_ERR(phydev);
-+	}
-+
-+	phydev->supported &= (SUPPORTED_10baseT_Half
-+			| SUPPORTED_10baseT_Full
-+			| SUPPORTED_100baseT_Half
-+			| SUPPORTED_100baseT_Full
-+			| SUPPORTED_1000baseT_Half
-+			| SUPPORTED_1000baseT_Full
-+			| SUPPORTED_Autoneg
-+			| SUPPORTED_MII
-+			| SUPPORTED_TP);
-+	phydev->advertising = phydev->supported;
-+	port->phydev = phydev;
-+
-+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+		dev->name, phydev->drv->name,
-+		dev_name(&phydev->dev), phydev->irq);
-+
-+#ifdef SW_POLLING
-+	phy_read_status(phydev);
-+
-+	val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+	val |= ADVERTIZE_MPD;
-+	xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+	xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
-+
-+	phy_start_aneg(phydev);
-+#endif
-+	return 0;
-+}
-+
-+static void xrx200_port_config(struct xrx200_priv *priv,
-+		const struct xrx200_port *port)
-+{
-+	u16 miimode = 0;
-+
-+	switch (port->num) {
-+	case 0: /* xMII0 */
-+	case 1: /* xMII1 */
-+		switch (port->phy_if) {
-+		case PHY_INTERFACE_MODE_MII:
-+			if (port->flags & XRX200_PORT_TYPE_PHY)
-+				/* MII MAC mode, connected to external PHY */
-+				miimode = MII_CFG_MODE_MIIM;
-+			else
-+				/* MII PHY mode, connected to external MAC */
-+				miimode = MII_CFG_MODE_MIIP;
-+			break;
-+		case PHY_INTERFACE_MODE_RMII:
-+			if (port->flags & XRX200_PORT_TYPE_PHY)
-+				/* RMII MAC mode, connected to external PHY */
-+				miimode = MII_CFG_MODE_RMIIM;
-+			else
-+				/* RMII PHY mode, connected to external MAC */
-+				miimode = MII_CFG_MODE_RMIIP;
-+			break;
-+		case PHY_INTERFACE_MODE_RGMII:
-+			/* RGMII MAC mode, connected to external PHY */
-+			miimode = MII_CFG_MODE_RGMII;
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	case 2: /* internal GPHY0 */
-+	case 3: /* internal GPHY0 */
-+	case 4: /* internal GPHY1 */
-+		switch (port->phy_if) {
-+			case PHY_INTERFACE_MODE_MII:
-+			case PHY_INTERFACE_MODE_GMII:
-+				/* MII MAC mode, connected to internal GPHY */
-+				miimode = MII_CFG_MODE_MIIM;
-+				break;
-+			default:
-+				break;
-+		}
-+		break;
-+	case 5: /* internal GPHY1 or xMII2 */
-+		switch (port->phy_if) {
-+		case PHY_INTERFACE_MODE_MII:
-+			/* MII MAC mode, connected to internal GPHY */
-+			miimode = MII_CFG_MODE_MIIM;
-+			break;
-+		case PHY_INTERFACE_MODE_RGMII:
-+			/* RGMII MAC mode, connected to external PHY */
-+			miimode = MII_CFG_MODE_RGMII;
-+			break;
-+		default:
-+			break;
-+		}
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
-+		MII_CFG(port->num));
-+}
-+
-+static int xrx200_init(struct net_device *dev)
-+{
-+	struct xrx200_priv *priv = netdev_priv(dev);
-+	struct sockaddr mac;
-+	int err, i;
-+
-+#ifndef SW_POLLING
-+	unsigned int reg = 0;
-+
-+	/* enable auto polling */
-+	for (i = 0; i < priv->num_port; i++)
-+		reg |= BIT(priv->port[i].num);
-+	ltq_mdio_w32(reg, MDIO_CLK_CFG0);
-+	ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
-+#endif
-+
-+	/* setup each port */
-+	for (i = 0; i < priv->num_port; i++)
-+		xrx200_port_config(priv, &priv->port[i]);
-+
-+	memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+	if (!is_valid_ether_addr(mac.sa_data)) {
-+		pr_warn("net-xrx200: invalid MAC, using random\n");
-+		eth_random_addr(mac.sa_data);
-+		dev->addr_assign_type |= NET_ADDR_RANDOM;
-+	}
-+
-+	err = eth_mac_addr(dev, &mac);
-+	if (err)
-+		goto err_netdev;
-+
-+	for (i = 0; i < priv->num_port; i++)
-+		if (xrx200_mdio_probe(dev, &priv->port[i]))
-+			pr_warn("xrx200-mdio: probing phy of port %d failed\n",
-+					 priv->port[i].num);
-+
-+	return 0;
-+
-+err_netdev:
-+	unregister_netdev(dev);
-+	free_netdev(dev);
-+	return err;
-+}
-+
-+static void xrx200_pci_microcode(void)
-+{
-+	int i;
-+
-+	ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
-+		PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
-+	ltq_switch_w32(0, PCE_TBL_MASK);
-+
-+	for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
-+		ltq_switch_w32(i, PCE_TBL_ADDR);
-+		ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
-+		ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
-+		ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
-+		ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
-+
-+		// start the table access:
-+		ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
-+		while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
-+	}
-+
-+	/* tell the switch that the microcode is loaded */
-+	ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
-+}
-+
-+static void xrx200_hw_init(struct xrx200_hw *hw)
-+{
-+	int i;
-+
-+	/* enable clock gate */
-+	clk_enable(hw->clk);
-+
-+	ltq_switch_w32(1, 0);
-+	mdelay(100);
-+	ltq_switch_w32(0, 0);
-+	/*
-+	 * TODO: we should really disbale all phys/miis here and explicitly
-+	 * enable them in the device secific init function
-+	 */
-+
-+	/* disable port fetch/store dma */
-+	for (i = 0; i < 7; i++ ) {
-+		ltq_switch_w32(0, FDMA_PCTRLx(i));
-+		ltq_switch_w32(0, SDMA_PCTRLx(i));
-+	}
-+
-+	/* enable Switch */
-+	ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
-+
-+	/* load the pce microcode */
-+	xrx200_pci_microcode();
-+
-+	/* Default unknown Broadcat/Multicast/Unicast port maps */
-+	ltq_switch_w32(0x7f, PCE_PMAP1);
-+	ltq_switch_w32(0x7f, PCE_PMAP2);
-+	ltq_switch_w32(0x7f, PCE_PMAP3);
-+
-+	/* RMON Counter Enable for all physical ports */
-+	for (i = 0; i < 7; i++)
-+		ltq_switch_w32(0x1, BM_PCFG(i));
-+
-+	/* disable auto polling */
-+	ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
-+
-+	/* enable port statistic counters */
-+	for (i = 0; i < 7; i++)
-+		ltq_switch_w32(0x1, BM_PCFGx(i));
-+
-+	/* set IPG to 12 */
-+	ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
-+
-+#ifdef SW_ROUTING
-+	/* enable status header, enable CRC */
-+	ltq_pmac_w32_mask(0,
-+		PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL);
-+#else
-+	/* disable status header, enable CRC */
-+	ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
-+		PMAC_HD_CTL_AC,
-+		PMAC_HD_CTL);
-+#endif
-+
-+	/* enable port fetch/store dma */
-+	for (i = 0; i < 7; i++ ) {
-+		ltq_switch_w32_mask(0, 0x01, FDMA_PCTRLx(i));
-+		ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
-+		ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
-+	}
-+
-+	/* enable special tag insertion on cpu port */
-+	ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
-+	ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
-+	ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
-+	ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
-+}
-+
-+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
-+{
-+	int i;
-+
-+	/* disable the switch */
-+	ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
-+
-+	/* free the channels and IRQs */
-+	for (i = 0; i < 2; i++) {
-+		ltq_dma_free(&hw->chan[i].dma);
-+		if (hw->chan[i].dma.irq)
-+			free_irq(hw->chan[i].dma.irq, hw);
-+	}
-+
-+	/* free the allocated RX ring */
-+	for (i = 0; i < LTQ_DESC_NUM; i++)
-+		dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
-+
-+	/* clear the mdio bus */
-+	mdiobus_unregister(hw->mii_bus);
-+	mdiobus_free(hw->mii_bus);
-+
-+	/* release the clock */
-+	clk_disable(hw->clk);
-+	clk_put(hw->clk);
-+}
-+
-+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
-+{
-+	hw->mii_bus = mdiobus_alloc();
-+	if (!hw->mii_bus)
-+		return -ENOMEM;
-+
-+	hw->mii_bus->read = xrx200_mdio_rd;
-+	hw->mii_bus->write = xrx200_mdio_wr;
-+	hw->mii_bus->name = "lantiq,xrx200-mdio";
-+	snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+
-+	if (of_mdiobus_register(hw->mii_bus, np)) {
-+		mdiobus_free(hw->mii_bus);
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
-+{
-+	const __be32 *addr, *id = of_get_property(port, "reg", NULL);
-+	struct xrx200_port *p = &priv->port[priv->num_port];
-+
-+	if (!id)
-+		return;
-+
-+	memset(p, 0, sizeof(struct xrx200_port));
-+	p->phy_node = of_parse_phandle(port, "phy-handle", 0);
-+	addr = of_get_property(p->phy_node, "reg", NULL);
-+	if (!addr)
-+		return;
-+
-+	p->num = *id;
-+	p->phy_addr = *addr;
-+	p->phy_if = of_get_phy_mode(port);
-+	if (p->phy_addr > 0x10)
-+		p->flags = XRX200_PORT_TYPE_MAC;
-+	else
-+		p->flags = XRX200_PORT_TYPE_PHY;
-+	priv->num_port++;
-+
-+	p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
-+	if (gpio_is_valid(p->gpio))
-+		if (!gpio_request(p->gpio, "phy-reset")) {
-+			gpio_direction_output(p->gpio,
-+				(p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
-+			udelay(100);
-+			gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+		}
-+	/* is this port a wan port ? */
-+	if (priv->wan)
-+		priv->hw->wan_map |= BIT(p->num);
-+
-+	priv->port_map |= BIT(p->num);
-+
-+	/* store the port id in the hw struct so we can map ports -> devices */
-+	priv->hw->port_map[p->num] = priv->hw->num_devs;
-+}
-+
-+static const struct net_device_ops xrx200_netdev_ops = {
-+	.ndo_init		= xrx200_init,
-+	.ndo_open		= xrx200_open,
-+	.ndo_stop		= xrx200_close,
-+	.ndo_start_xmit		= xrx200_start_xmit,
-+	.ndo_set_mac_address	= eth_mac_addr,
-+	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_change_mtu		= eth_change_mtu,
-+	.ndo_get_stats		= xrx200_get_stats,
-+	.ndo_tx_timeout		= xrx200_tx_timeout,
-+};
-+
-+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
-+{
-+	struct xrx200_priv *priv;
-+	struct device_node *port;
-+	const __be32 *wan;
-+
-+	/* alloc the network device */
-+	hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
-+	if (!hw->devs[hw->num_devs])
-+		return;
-+
-+	/* setup the network device */
-+	strcpy(hw->devs[hw->num_devs]->name, "eth%d");
-+	hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
-+	hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
-+	hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
-+
-+	/* setup our private data */
-+	priv = netdev_priv(hw->devs[hw->num_devs]);
-+	priv->hw = hw;
-+	priv->mac = of_get_mac_address(iface);
-+	priv->id = hw->num_devs;
-+
-+	/* is this the wan interface ? */
-+	wan = of_get_property(iface, "lantiq,wan", NULL);
-+	if (wan && (*wan == 1))
-+		priv->wan = 1;
-+
-+	/* load the ports that are part of the interface */
-+	for_each_child_of_node(iface, port)
-+		if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
-+			xrx200_of_port(priv, port);
-+
-+	/* register the actual device */
-+	if (!register_netdev(hw->devs[hw->num_devs]))
-+		hw->num_devs++;
-+}
-+
-+static struct xrx200_hw xrx200_hw;
-+
-+static int xrx200_probe(struct platform_device *pdev)
-+{
-+	struct resource *res[4];
-+	struct device_node *mdio_np, *iface_np;
-+	int i;
-+
-+	/* load the memory ranges */
-+	for (i = 0; i < 4; i++) {
-+		res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+		if (!res[i]) {
-+			dev_err(&pdev->dev, "failed to get resources\n");
-+			return -ENOENT;
-+		}
-+	}
-+	xrx200_switch_membase = devm_request_and_ioremap(&pdev->dev, res[0]);
-+	xrx200_mdio_membase = devm_request_and_ioremap(&pdev->dev, res[1]);
-+	xrx200_mii_membase = devm_request_and_ioremap(&pdev->dev, res[2]);
-+	xrx200_pmac_membase = devm_request_and_ioremap(&pdev->dev, res[3]);
-+	if (!xrx200_switch_membase || !xrx200_mdio_membase ||
-+			!xrx200_mii_membase || !xrx200_pmac_membase) {
-+		dev_err(&pdev->dev, "failed to request and remap io ranges \n");
-+		return -ENOMEM;
-+	}
-+
-+	/* get the clock */
-+	xrx200_hw.clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(xrx200_hw.clk)) {
-+		dev_err(&pdev->dev, "failed to get clock\n");
-+		return PTR_ERR(xrx200_hw.clk);
-+	}
-+
-+	/* bring up the dma engine and IP core */
-+	spin_lock_init(&xrx200_hw.lock);
-+	xrx200_dma_init(&xrx200_hw);
-+	xrx200_hw_init(&xrx200_hw);
-+	tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
-+
-+	/* bring up the mdio bus */
-+	mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
-+				"lantiq,xrx200-mdio");
-+	if (mdio_np)
-+		if (xrx200_of_mdio(&xrx200_hw, mdio_np))
-+			dev_err(&pdev->dev, "mdio probe failed\n");
-+
-+	/* load the interfaces */
-+	for_each_child_of_node(pdev->dev.of_node, iface_np)
-+		if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
-+			if (xrx200_hw.num_devs < XRX200_MAX_DEV)
-+				xrx200_of_iface(&xrx200_hw, iface_np);
-+			else
-+				dev_err(&pdev->dev,
-+					"only %d interfaces allowed\n",
-+					XRX200_MAX_DEV);
-+		}
-+
-+	if (!xrx200_hw.num_devs) {
-+		xrx200_hw_cleanup(&xrx200_hw);
-+		dev_err(&pdev->dev, "failed to load interfaces\n");
-+		return -ENOENT;
-+	}
-+
-+	/* set wan port mask */
-+	ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
-+
-+	for (i = 0; i < xrx200_hw.num_devs; i++) {
-+		xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
-+		xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
-+	}
-+
-+	/* setup NAPI */
-+	init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
-+	netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
-+			&xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
-+
-+	platform_set_drvdata(pdev, &xrx200_hw);
-+
-+	return 0;
-+}
-+
-+static int xrx200_remove(struct platform_device *pdev)
-+{
-+	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct xrx200_priv *priv;
-+
-+	if (!dev)
-+		return 0;
-+
-+	priv = netdev_priv(dev);
-+
-+	/* free stack related instances */
-+	netif_stop_queue(dev);
-+	netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
-+
-+	/* shut down hardware */
-+	xrx200_hw_cleanup(&xrx200_hw);
-+
-+	/* remove the actual device */
-+	unregister_netdev(dev);
-+	free_netdev(dev);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id xrx200_match[] = {
-+	{ .compatible = "lantiq,xrx200-net" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, xrx200_match);
-+
-+static struct platform_driver xrx200_driver = {
-+	.probe = xrx200_probe,
-+	.remove = xrx200_remove,
-+	.driver = {
-+		.name = "lantiq,xrx200-net",
-+		.of_match_table = xrx200_match,
-+		.owner = THIS_MODULE,
-+	},
-+};
-+
-+module_platform_driver(xrx200_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch b/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
deleted file mode 100644
index 0d3dde8..0000000
--- a/target/linux/lantiq/patches-3.8/0026-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch
+++ /dev/null
@@ -1,828 +0,0 @@
-From 32010516999c75d8e8ea95779137438f4f6d06ae Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:32:16 +0100
-Subject: [PATCH 26/40] NET: MIPS: lantiq: update etop driver for devicetree
-
----
- drivers/net/ethernet/lantiq_etop.c |  496 +++++++++++++++++++++++++-----------
- 1 file changed, 351 insertions(+), 145 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -12,7 +12,7 @@
-  *   along with this program; if not, write to the Free Software
-  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-  *
-- *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *   Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
-  */
- 
- #include <linux/kernel.h>
-@@ -36,6 +36,10 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_platform.h>
- 
- #include <asm/checksum.h>
- 
-@@ -71,25 +75,61 @@
- #define ETOP_MII_REVERSE	0xe
- #define ETOP_PLEN_UNDER		0x40
- #define ETOP_CGEN		0x800
-+#define ETOP_CFG_MII0		0x01
- 
--/* use 2 static channels for TX/RX */
--#define LTQ_ETOP_TX_CHANNEL	1
--#define LTQ_ETOP_RX_CHANNEL	6
--#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
--#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
-+#define LTQ_GBIT_MDIO_CTL	0xCC
-+#define LTQ_GBIT_MDIO_DATA	0xd0
-+#define LTQ_GBIT_GCTL0		0x68
-+#define LTQ_GBIT_PMAC_HD_CTL	0x8c
-+#define LTQ_GBIT_P0_CTL		0x4
-+#define LTQ_GBIT_PMAC_RX_IPG	0xa8
-+#define LTQ_GBIT_RGMII_CTL	0x78
-+
-+#define PMAC_HD_CTL_AS		(1 << 19)
-+#define PMAC_HD_CTL_RXSH	(1 << 22)
-+
-+/* Switch Enable (0=disable, 1=enable) */
-+#define GCTL0_SE		0x80000000
-+/* Disable MDIO auto polling (0=disable, 1=enable) */
-+#define PX_CTL_DMDIO		0x00400000
-+
-+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
-+#define MDC_CLOCK_MASK		0xff000000
-+#define MDC_CLOCK_OFFSET	24
-+
-+/* register information for the gbit's MDIO bus */
-+#define MDIO_XR9_REQUEST	0x00008000
-+#define MDIO_XR9_READ		0x00000800
-+#define MDIO_XR9_WRITE		0x00000400
-+#define MDIO_XR9_REG_MASK	0x1f
-+#define MDIO_XR9_ADDR_MASK	0x1f
-+#define MDIO_XR9_RD_MASK	0xffff
-+#define MDIO_XR9_REG_OFFSET	0
-+#define MDIO_XR9_ADDR_OFFSET	5
-+#define MDIO_XR9_WR_OFFSET	16
- 
-+#define LTQ_DMA_ETOP	((of_machine_is_compatible("lantiq,ase")) ? \
-+			(INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
-+
-+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
- #define ltq_etop_r32(x)		ltq_r32(ltq_etop_membase + (x))
- #define ltq_etop_w32(x, y)	ltq_w32(x, ltq_etop_membase + (y))
- #define ltq_etop_w32_mask(x, y, z)	\
- 		ltq_w32_mask(x, y, ltq_etop_membase + (z))
- 
--#define DRV_VERSION	"1.0"
-+#define ltq_gbit_r32(x)		ltq_r32(ltq_gbit_membase + (x))
-+#define ltq_gbit_w32(x, y)	ltq_w32(x, ltq_gbit_membase + (y))
-+#define ltq_gbit_w32_mask(x, y, z)	\
-+		ltq_w32_mask(x, y, ltq_gbit_membase + (z))
-+
-+#define DRV_VERSION	"1.2"
- 
- static void __iomem *ltq_etop_membase;
-+static void __iomem *ltq_gbit_membase;
- 
- struct ltq_etop_chan {
--	int idx;
- 	int tx_free;
-+	int irq;
- 	struct net_device *netdev;
- 	struct napi_struct napi;
- 	struct ltq_dma_channel dma;
-@@ -99,22 +139,35 @@ struct ltq_etop_chan {
- struct ltq_etop_priv {
- 	struct net_device *netdev;
- 	struct platform_device *pdev;
--	struct ltq_eth_data *pldata;
- 	struct resource *res;
- 
- 	struct mii_bus *mii_bus;
- 	struct phy_device *phydev;
- 
--	struct ltq_etop_chan ch[MAX_DMA_CHAN];
--	int tx_free[MAX_DMA_CHAN >> 1];
-+	struct ltq_etop_chan txch;
-+	struct ltq_etop_chan rxch;
-+
-+	int tx_irq;
-+	int rx_irq;
-+
-+	const void *mac;
-+	int mii_mode;
- 
- 	spinlock_t lock;
-+
-+	struct clk *clk_ppe;
-+	struct clk *clk_switch;
-+	struct clk *clk_ephy;
-+	struct clk *clk_ephycgu;
- };
- 
-+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-+				int phy_reg, u16 phy_data);
-+
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
--	ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
-+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
- 	if (!ch->skb[ch->dma.desc])
- 		return -ENOMEM;
- 	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-@@ -149,8 +202,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
- 	skb_put(skb, len);
-+	skb->dev = ch->netdev;
- 	skb->protocol = eth_type_trans(skb, ch->netdev);
- 	netif_receive_skb(skb);
-+	ch->netdev->stats.rx_packets++;
-+	ch->netdev->stats.rx_bytes += len;
- }
- 
- static int
-@@ -158,8 +214,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- 	struct ltq_etop_chan *ch = container_of(napi,
- 				struct ltq_etop_chan, napi);
-+	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	int rx = 0;
- 	int complete = 0;
-+	unsigned long flags;
- 
- 	while ((rx < budget) && !complete) {
- 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -173,7 +231,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- 	}
- 	if (complete || !rx) {
- 		napi_complete(&ch->napi);
-+		spin_lock_irqsave(&priv->lock, flags);
- 		ltq_dma_ack_irq(&ch->dma);
-+		spin_unlock_irqrestore(&priv->lock, flags);
- 	}
- 	return rx;
- }
-@@ -185,12 +245,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 		container_of(napi, struct ltq_etop_chan, napi);
- 	struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- 	struct netdev_queue *txq =
--		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+		netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
- 	unsigned long flags;
- 
- 	spin_lock_irqsave(&priv->lock, flags);
- 	while ((ch->dma.desc_base[ch->tx_free].ctl &
- 			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+		ch->netdev->stats.tx_packets++;
-+		ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
- 		dev_kfree_skb_any(ch->skb[ch->tx_free]);
- 		ch->skb[ch->tx_free] = NULL;
- 		memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -203,7 +265,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
- 	if (netif_tx_queue_stopped(txq))
- 		netif_tx_start_queue(txq);
- 	napi_complete(&ch->napi);
-+	spin_lock_irqsave(&priv->lock, flags);
- 	ltq_dma_ack_irq(&ch->dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
- 	return 1;
- }
- 
-@@ -211,9 +275,10 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- 	struct ltq_etop_priv *priv = _priv;
--	int ch = irq - LTQ_DMA_CH0_INT;
--
--	napi_schedule(&priv->ch[ch].napi);
-+	if (irq == priv->txch.dma.irq)
-+		napi_schedule(&priv->txch.napi);
-+	else
-+		napi_schedule(&priv->rxch.napi);
- 	return IRQ_HANDLED;
- }
- 
-@@ -225,7 +290,7 @@ ltq_etop_free_channel(struct net_device
- 	ltq_dma_free(&ch->dma);
- 	if (ch->dma.irq)
- 		free_irq(ch->dma.irq, priv);
--	if (IS_RX(ch->idx)) {
-+	if (ch == &priv->txch) {
- 		int desc;
- 		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- 			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -236,23 +301,62 @@ static void
- ltq_etop_hw_exit(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
- 
--	ltq_pmu_disable(PMU_PPE);
--	for (i = 0; i < MAX_DMA_CHAN; i++)
--		if (IS_TX(i) || IS_RX(i))
--			ltq_etop_free_channel(dev, &priv->ch[i]);
-+	clk_disable(priv->clk_ppe);
-+
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		clk_disable(priv->clk_switch);
-+
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		clk_disable(priv->clk_ephy);
-+		clk_disable(priv->clk_ephycgu);
-+	}
-+
-+	ltq_etop_free_channel(dev, &priv->txch);
-+	ltq_etop_free_channel(dev, &priv->rxch);
-+}
-+
-+static void
-+ltq_etop_gbit_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+
-+	clk_enable(priv->clk_switch);
-+
-+	/* enable gbit port0 on the SoC */
-+	ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
-+
-+	ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
-+	/* disable MDIO auto polling mode */
-+	ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-+	/* set 1522 packet size */
-+	ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
-+	/* disable pmac & dmac headers */
-+	ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
-+		LTQ_GBIT_PMAC_HD_CTL);
-+	/* Due to traffic halt when burst length 8,
-+		replace default IPG value with 0x3B */
-+	ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
-+	/* set mdc clock to 2.5 MHz */
-+	ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
-+		LTQ_GBIT_RGMII_CTL);
- }
- 
- static int
- ltq_etop_hw_init(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	int mii_mode = priv->mii_mode;
-+
-+	clk_enable(priv->clk_ppe);
- 
--	ltq_pmu_enable(PMU_PPE);
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		ltq_etop_gbit_init(dev);
-+		/* force the etops link to the gbit to MII */
-+		mii_mode = PHY_INTERFACE_MODE_MII;
-+	}
- 
--	switch (priv->pldata->mii_mode) {
-+	switch (mii_mode) {
- 	case PHY_INTERFACE_MODE_RMII:
- 		ltq_etop_w32_mask(ETOP_MII_MASK,
- 			ETOP_MII_REVERSE, LTQ_ETOP_CFG);
-@@ -264,39 +368,68 @@ ltq_etop_hw_init(struct net_device *dev)
- 		break;
- 
- 	default:
-+		if (of_machine_is_compatible("lantiq,ase")) {
-+			clk_enable(priv->clk_ephy);
-+			/* disable external MII */
-+			ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
-+			/* enable clock for internal PHY */
-+			clk_enable(priv->clk_ephycgu);
-+			/* we need to write this magic to the internal phy to
-+			   make it work */
-+			ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-+			pr_info("Selected EPHY mode\n");
-+			break;
-+		}
- 		netdev_err(dev, "unknown mii mode %d\n",
--			priv->pldata->mii_mode);
-+			mii_mode);
- 		return -ENOTSUPP;
- 	}
- 
- 	/* enable crc generation */
- 	ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
- 
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_dma_init(struct net_device *dev)
-+{
-+	struct ltq_etop_priv *priv = netdev_priv(dev);
-+	int tx = priv->tx_irq - LTQ_DMA_ETOP;
-+	int rx = priv->rx_irq - LTQ_DMA_ETOP;
-+	int err;
-+
- 	ltq_dma_init_port(DMA_PORT_ETOP);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		int irq = LTQ_DMA_CH0_INT + i;
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		ch->idx = ch->dma.nr = i;
--
--		if (IS_TX(i)) {
--			ltq_dma_alloc_tx(&ch->dma);
--			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
--				"etop_tx", priv);
--		} else if (IS_RX(i)) {
--			ltq_dma_alloc_rx(&ch->dma);
--			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
--					ch->dma.desc++)
--				if (ltq_etop_alloc_skb(ch))
--					return -ENOMEM;
--			ch->dma.desc = 0;
--			request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
--				"etop_rx", priv);
-+	priv->txch.dma.nr = tx;
-+	ltq_dma_alloc_tx(&priv->txch.dma);
-+	err = request_irq(priv->tx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+		"eth_tx", priv);
-+	if (err) {
-+		netdev_err(dev, "failed to allocate tx irq\n");
-+		goto err_out;
-+	}
-+	priv->txch.dma.irq = priv->tx_irq;
-+
-+	priv->rxch.dma.nr = rx;
-+	ltq_dma_alloc_rx(&priv->rxch.dma);
-+	for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
-+			priv->rxch.dma.desc++) {
-+		if (ltq_etop_alloc_skb(&priv->rxch)) {
-+			netdev_err(dev, "failed to allocate skbs\n");
-+			err = -ENOMEM;
-+			goto err_out;
- 		}
--		ch->dma.irq = irq;
- 	}
--	return 0;
-+	priv->rxch.dma.desc = 0;
-+	err = request_irq(priv->rx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+		"eth_rx", priv);
-+	if (err)
-+		netdev_err(dev, "failed to allocate rx irq\n");
-+	else
-+		priv->rxch.dma.irq = priv->rx_irq;
-+err_out:
-+	return err;
- }
- 
- static void
-@@ -312,7 +445,10 @@ ltq_etop_get_settings(struct net_device
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_ethtool_gset(priv->phydev, cmd);
-+	if (priv->phydev)
-+		return phy_ethtool_gset(priv->phydev, cmd);
-+	else
-+		return 0;
- }
- 
- static int
-@@ -320,7 +456,10 @@ ltq_etop_set_settings(struct net_device
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_ethtool_sset(priv->phydev, cmd);
-+	if (priv->phydev)
-+		return phy_ethtool_sset(priv->phydev, cmd);
-+	else
-+		return 0;
- }
- 
- static int
-@@ -328,7 +467,10 @@ ltq_etop_nway_reset(struct net_device *d
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 
--	return phy_start_aneg(priv->phydev);
-+	if (priv->phydev)
-+		return phy_start_aneg(priv->phydev);
-+	else
-+		return 0;
- }
- 
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -339,6 +481,39 @@ static const struct ethtool_ops ltq_etop
- };
- 
- static int
-+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
-+		int phy_reg, u16 phy_data)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
-+		(phy_data << MDIO_XR9_WR_OFFSET) |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	return 0;
-+}
-+
-+static int
-+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+	u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
-+		((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+		((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+	while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+		;
-+	val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
-+	return val;
-+}
-+
-+static int
- ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
- {
- 	u32 val = MDIO_REQUEST |
-@@ -379,14 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 	struct phy_device *phydev = NULL;
--	int phy_addr;
-+	u32 phy_supported =  (SUPPORTED_10baseT_Half
-+			| SUPPORTED_10baseT_Full
-+			| SUPPORTED_100baseT_Half
-+			| SUPPORTED_100baseT_Full
-+			| SUPPORTED_Autoneg
-+			| SUPPORTED_MII
-+			| SUPPORTED_TP);
- 
--	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
--		if (priv->mii_bus->phy_map[phy_addr]) {
--			phydev = priv->mii_bus->phy_map[phy_addr];
--			break;
--		}
--	}
-+	if (of_machine_is_compatible("lantiq,ase"))
-+		phydev = priv->mii_bus->phy_map[8];
-+	else
-+		phydev = priv->mii_bus->phy_map[0];
- 
- 	if (!phydev) {
- 		netdev_err(dev, "no PHY found\n");
-@@ -394,21 +573,18 @@ ltq_etop_mdio_probe(struct net_device *d
- 	}
- 
- 	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_etop_mdio_link,
--			0, priv->pldata->mii_mode);
-+			0, priv->mii_mode);
- 
- 	if (IS_ERR(phydev)) {
- 		netdev_err(dev, "Could not attach to PHY\n");
- 		return PTR_ERR(phydev);
- 	}
- 
--	phydev->supported &= (SUPPORTED_10baseT_Half
--			      | SUPPORTED_10baseT_Full
--			      | SUPPORTED_100baseT_Half
--			      | SUPPORTED_100baseT_Full
--			      | SUPPORTED_Autoneg
--			      | SUPPORTED_MII
--			      | SUPPORTED_TP);
-+	if (of_machine_is_compatible("lantiq,ar9"))
-+		phy_supported |= SUPPORTED_1000baseT_Half
-+			| SUPPORTED_1000baseT_Full;
- 
-+	phydev->supported &= phy_supported;
- 	phydev->advertising = phydev->supported;
- 	priv->phydev = phydev;
- 	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-@@ -433,8 +609,13 @@ ltq_etop_mdio_init(struct net_device *de
- 	}
- 
- 	priv->mii_bus->priv = dev;
--	priv->mii_bus->read = ltq_etop_mdio_rd;
--	priv->mii_bus->write = ltq_etop_mdio_wr;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
-+		priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
-+	} else {
-+		priv->mii_bus->read = ltq_etop_mdio_rd;
-+		priv->mii_bus->write = ltq_etop_mdio_wr;
-+	}
- 	priv->mii_bus->name = "ltq_mii";
- 	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- 		priv->pdev->name, priv->pdev->id);
-@@ -483,17 +664,19 @@ static int
- ltq_etop_open(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
-+	napi_enable(&priv->txch.napi);
-+	napi_enable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_open(&priv->txch.dma);
-+	ltq_dma_open(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
-+	if (priv->phydev)
-+		phy_start(priv->phydev);
- 
--		if (!IS_TX(i) && (!IS_RX(i)))
--			continue;
--		ltq_dma_open(&ch->dma);
--		napi_enable(&ch->napi);
--	}
--	phy_start(priv->phydev);
- 	netif_tx_start_all_queues(dev);
- 	return 0;
- }
-@@ -502,18 +685,19 @@ static int
- ltq_etop_stop(struct net_device *dev)
- {
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	int i;
-+	unsigned long flags;
- 
- 	netif_tx_stop_all_queues(dev);
--	phy_stop(priv->phydev);
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		struct ltq_etop_chan *ch = &priv->ch[i];
--
--		if (!IS_RX(i) && !IS_TX(i))
--			continue;
--		napi_disable(&ch->napi);
--		ltq_dma_close(&ch->dma);
--	}
-+	if (priv->phydev)
-+		phy_stop(priv->phydev);
-+	napi_disable(&priv->txch.napi);
-+	napi_disable(&priv->rxch.napi);
-+
-+	spin_lock_irqsave(&priv->lock, flags);
-+	ltq_dma_close(&priv->txch.dma);
-+	ltq_dma_close(&priv->rxch.dma);
-+	spin_unlock_irqrestore(&priv->lock, flags);
-+
- 	return 0;
- }
- 
-@@ -523,16 +707,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	int queue = skb_get_queue_mapping(skb);
- 	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
--	struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
--	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
--	int len;
-+	struct ltq_dma_desc *desc =
-+		&priv->txch.dma.desc_base[priv->txch.dma.desc];
- 	unsigned long flags;
- 	u32 byte_offset;
-+	int len;
- 
- 	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- 
--	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
--		dev_kfree_skb_any(skb);
-+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
-+			priv->txch.skb[priv->txch.dma.desc]) {
- 		netdev_err(dev, "tx ring full\n");
- 		netif_tx_stop_queue(txq);
- 		return NETDEV_TX_BUSY;
-@@ -540,7 +724,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 
- 	/* dma needs to start on a 16 byte aligned address */
- 	byte_offset = CPHYSADDR(skb->data) % 16;
--	ch->skb[ch->dma.desc] = skb;
-+	priv->txch.skb[priv->txch.dma.desc] = skb;
- 
- 	dev->trans_start = jiffies;
- 
-@@ -550,11 +734,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
- 	wmb();
- 	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- 		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
--	ch->dma.desc++;
--	ch->dma.desc %= LTQ_DESC_NUM;
-+	priv->txch.dma.desc++;
-+	priv->txch.dma.desc %= LTQ_DESC_NUM;
- 	spin_unlock_irqrestore(&priv->lock, flags);
- 
--	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+	if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
- 		netif_tx_stop_queue(txq);
- 
- 	return NETDEV_TX_OK;
-@@ -633,34 +817,32 @@ ltq_etop_init(struct net_device *dev)
- 	struct ltq_etop_priv *priv = netdev_priv(dev);
- 	struct sockaddr mac;
- 	int err;
--	bool random_mac = false;
- 
- 	ether_setup(dev);
- 	dev->watchdog_timeo = 10 * HZ;
- 	err = ltq_etop_hw_init(dev);
- 	if (err)
- 		goto err_hw;
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
-+
- 	ltq_etop_change_mtu(dev, 1500);
- 
--	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-+	memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
- 	if (!is_valid_ether_addr(mac.sa_data)) {
- 		pr_warn("etop: invalid MAC, using random\n");
--		eth_random_addr(mac.sa_data);
--		random_mac = true;
-+		random_ether_addr(mac.sa_data);
- 	}
- 
- 	err = ltq_etop_set_mac_address(dev, &mac);
- 	if (err)
- 		goto err_netdev;
--
--	/* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */
--	if (random_mac)
--		dev->addr_assign_type |= NET_ADDR_RANDOM;
--
- 	ltq_etop_set_multicast_list(dev);
--	err = ltq_etop_mdio_init(dev);
--	if (err)
--		goto err_netdev;
-+	if (!ltq_etop_mdio_init(dev))
-+		dev->ethtool_ops = &ltq_etop_ethtool_ops;
-+	else
-+		pr_warn("etop: mdio probe failed\n");;
- 	return 0;
- 
- err_netdev:
-@@ -680,6 +862,9 @@ ltq_etop_tx_timeout(struct net_device *d
- 	err = ltq_etop_hw_init(dev);
- 	if (err)
- 		goto err_hw;
-+	err = ltq_etop_dma_init(dev);
-+	if (err)
-+		goto err_hw;
- 	dev->trans_start = jiffies;
- 	netif_wake_queue(dev);
- 	return;
-@@ -703,14 +888,19 @@ static const struct net_device_ops ltq_e
- 	.ndo_tx_timeout = ltq_etop_tx_timeout,
- };
- 
--static int __init
-+static int __devinit
- ltq_etop_probe(struct platform_device *pdev)
- {
- 	struct net_device *dev;
- 	struct ltq_etop_priv *priv;
--	struct resource *res;
-+	struct resource *res, *gbit_res, irqres[2];
- 	int err;
--	int i;
-+
-+	err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
-+	if (err != 2) {
-+		dev_err(&pdev->dev, "failed to get etop irqs\n");
-+		return -EINVAL;
-+	}
- 
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 	if (!res) {
-@@ -736,30 +926,58 @@ ltq_etop_probe(struct platform_device *p
- 		goto err_out;
- 	}
- 
--	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
--	if (!dev) {
--		err = -ENOMEM;
--		goto err_out;
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+		if (!gbit_res) {
-+			dev_err(&pdev->dev, "failed to get gbit resource\n");
-+			err = -ENOENT;
-+			goto err_out;
-+		}
-+		ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
-+			gbit_res->start, resource_size(gbit_res));
-+		if (!ltq_gbit_membase) {
-+			dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
-+				pdev->id);
-+			err = -ENOMEM;
-+			goto err_out;
-+		}
- 	}
-+
-+	dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- 	strcpy(dev->name, "eth%d");
- 	dev->netdev_ops = &ltq_eth_netdev_ops;
--	dev->ethtool_ops = &ltq_etop_ethtool_ops;
- 	priv = netdev_priv(dev);
- 	priv->res = res;
- 	priv->pdev = pdev;
--	priv->pldata = dev_get_platdata(&pdev->dev);
- 	priv->netdev = dev;
-+	priv->tx_irq = irqres[0].start;
-+	priv->rx_irq = irqres[1].start;
-+	priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
-+	priv->mac = of_get_mac_address(pdev->dev.of_node);
-+
-+	priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->clk_ppe))
-+		return PTR_ERR(priv->clk_ppe);
-+	if (of_machine_is_compatible("lantiq,ar9")) {
-+		priv->clk_switch = clk_get(&pdev->dev, "switch");
-+		if (IS_ERR(priv->clk_switch))
-+			return PTR_ERR(priv->clk_switch);
-+	}
-+	if (of_machine_is_compatible("lantiq,ase")) {
-+		priv->clk_ephy = clk_get(&pdev->dev, "ephy");
-+		if (IS_ERR(priv->clk_ephy))
-+			return PTR_ERR(priv->clk_ephy);
-+		priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
-+		if (IS_ERR(priv->clk_ephycgu))
-+			return PTR_ERR(priv->clk_ephycgu);
-+	}
-+
- 	spin_lock_init(&priv->lock);
- 
--	for (i = 0; i < MAX_DMA_CHAN; i++) {
--		if (IS_TX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_tx, 8);
--		else if (IS_RX(i))
--			netif_napi_add(dev, &priv->ch[i].napi,
--				ltq_etop_poll_rx, 32);
--		priv->ch[i].netdev = dev;
--	}
-+	netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
-+	netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
-+	priv->txch.netdev = dev;
-+	priv->rxch.netdev = dev;
- 
- 	err = register_netdev(dev);
- 	if (err)
-@@ -788,32 +1006,23 @@ ltq_etop_remove(struct platform_device *
- 	return 0;
- }
- 
-+static const struct of_device_id ltq_etop_match[] = {
-+	{ .compatible = "lantiq,etop-xway" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_etop_match);
-+
- static struct platform_driver ltq_mii_driver = {
-+	.probe = ltq_etop_probe,
- 	.remove = ltq_etop_remove,
- 	.driver = {
- 		.name = "ltq_etop",
- 		.owner = THIS_MODULE,
-+		.of_match_table = ltq_etop_match,
- 	},
- };
- 
--int __init
--init_ltq_etop(void)
--{
--	int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
--
--	if (ret)
--		pr_err("ltq_etop: Error registering platform driver!");
--	return ret;
--}
--
--static void __exit
--exit_ltq_etop(void)
--{
--	platform_driver_unregister(&ltq_mii_driver);
--}
--
--module_init(init_ltq_etop);
--module_exit(exit_ltq_etop);
-+module_platform_driver(ltq_mii_driver);
- 
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
- MODULE_DESCRIPTION("Lantiq SoC ETOP");
diff --git a/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
deleted file mode 100644
index 54359af..0000000
--- a/target/linux/lantiq/patches-3.8/0027-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ /dev/null
@@ -1,277 +0,0 @@
-From 0721e9f0502e633390044e651970692213283686 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:30:22 +0100
-Subject: [PATCH 27/40] NET: PHY: adds driver for lantiq PHY11G
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/Kconfig  |    5 ++
- drivers/net/phy/Makefile |    1 +
- drivers/net/phy/lantiq.c |  220 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 226 insertions(+)
- create mode 100644 drivers/net/phy/lantiq.c
-
-Index: linux-3.8.13/drivers/net/phy/Kconfig
-===================================================================
---- linux-3.8.13.orig/drivers/net/phy/Kconfig	2013-07-29 14:53:02.281688583 +0200
-+++ linux-3.8.13/drivers/net/phy/Kconfig	2013-07-29 14:53:04.033688626 +0200
-@@ -150,6 +150,11 @@
- 	---help---
- 	  Currently has a driver for the KSZ8041
- 
-+config LANTIQ_PHY
-+	tristate "Driver for Lantiq PHYs"
-+	---help---
-+	  Supports the 11G and 22E PHYs.
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
-Index: linux-3.8.13/drivers/net/phy/Makefile
-===================================================================
---- linux-3.8.13.orig/drivers/net/phy/Makefile	2013-07-29 14:53:02.281688583 +0200
-+++ linux-3.8.13/drivers/net/phy/Makefile	2013-07-29 14:53:04.033688626 +0200
-@@ -39,6 +39,7 @@
- obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
- obj-$(CONFIG_STE10XP)		+= ste10Xp.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
-+obj-$(CONFIG_LANTIQ_PHY)        += lantiq.o
- obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
- obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
-Index: linux-3.8.13/drivers/net/phy/lantiq.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/drivers/net/phy/lantiq.c	2013-07-29 14:53:30.029689243 +0200
-@@ -0,0 +1,231 @@
-+/*
-+ *   This program is free software; you can redistribute it and/or modify
-+ *   it under the terms of the GNU General Public License as published by
-+ *   the Free Software Foundation; either version 2 of the License, or
-+ *   (at your option) any later version.
-+ *
-+ *   This program is distributed in the hope that it will be useful,
-+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *   GNU General Public License for more details.
-+ *
-+ *   You should have received a copy of the GNU General Public License
-+ *   along with this program; if not, write to the Free Software
-+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ *   Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+#define MII_MMDCTRL		0x0d
-+#define MII_MMDDATA		0x0e
-+
-+#define MII_VR9_11G_IMASK	0x19	/* interrupt mask */
-+#define MII_VR9_11G_ISTAT	0x1a	/* interrupt status */
-+
-+#define INT_VR9_11G_WOL		BIT(15)	/* Wake-On-LAN */
-+#define INT_VR9_11G_ANE		BIT(11)	/* Auto-Neg error */
-+#define INT_VR9_11G_ANC		BIT(10)	/* Auto-Neg complete */
-+#define INT_VR9_11G_ADSC	BIT(5)	/* Link auto-downspeed detect */
-+#define INT_VR9_11G_DXMC	BIT(2)	/* Duplex mode change */
-+#define INT_VR9_11G_LSPC	BIT(1)	/* Link speed change */
-+#define INT_VR9_11G_LSTC	BIT(0)	/* Link state change */
-+#define INT_VR9_11G_MASK	(INT_VR9_11G_LSTC | INT_VR9_11G_ADSC)
-+
-+#define ADVERTISED_MPD		BIT(10)	/* Multi-port device */
-+
-+#define MMD_DEVAD		0x1f
-+#define MMD_ACTYPE_SHIFT	14
-+#define MMD_ACTYPE_ADDRESS	(0 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA		(1 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PI	(2 << MMD_ACTYPE_SHIFT)
-+#define MMD_ACTYPE_DATA_PIWR	(3 << MMD_ACTYPE_SHIFT)
-+
-+static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev,
-+						u16 regnum)
-+{
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, regnum);
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+
-+	return phy_read(phydev, MII_MMDDATA);
-+}
-+
-+static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev,
-+						u16 regnum, u16 val)
-+{
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, regnum);
-+	phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD);
-+	phy_write(phydev, MII_MMDDATA, val);
-+
-+	return 0;
-+}
-+
-+static int vr9_gphy_config_init(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	dev_dbg(&phydev->dev, "%s\n", __func__);
-+
-+	/* Mask all interrupts */
-+	err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+	if (err)
-+		return err;
-+
-+	/* Clear all pending interrupts */
-+	phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
-+	vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
-+	vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
-+	vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
-+	vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
-+	vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
-+	vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
-+	vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
-+	vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
-+	vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
-+
-+	return 0;
-+}
-+
-+static int vr9_gphy_config_aneg(struct phy_device *phydev)
-+{
-+	int reg, err;
-+
-+	/* Advertise as multi-port device */
-+	reg = phy_read(phydev, MII_CTRL1000);
-+	reg |= ADVERTISED_MPD;
-+	err = phy_write(phydev, MII_CTRL1000, reg);
-+	if (err)
-+		return err;
-+
-+	return genphy_config_aneg(phydev);
-+}
-+
-+static int vr9_gphy_ack_interrupt(struct phy_device *phydev)
-+{
-+	int reg;
-+
-+	/*
-+	 * Possible IRQ numbers:
-+	 * - IM3_IRL18 for GPHY0
-+	 * - IM3_IRL17 for GPHY1
-+	 *
-+	 * Due to a silicon bug IRQ lines are not really independent from
-+	 * each other. Sometimes the two lines are driven at the same time
-+	 * if only one GPHY core raises the interrupt.
-+	 */
-+
-+	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	return (reg < 0) ? reg : 0;
-+}
-+
-+static int vr9_gphy_did_interrupt(struct phy_device *phydev)
-+{
-+	int reg;
-+
-+	reg = phy_read(phydev, MII_VR9_11G_ISTAT);
-+
-+	return reg > 0;
-+}
-+
-+static int vr9_gphy_config_intr(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-+		err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK);
-+	else
-+		err = phy_write(phydev, MII_VR9_11G_IMASK, 0);
-+
-+	return err;
-+}
-+
-+static struct phy_driver lantiq_phy[] = {
-+	{
-+		.phy_id		= 0xd565a400,
-+		.phy_id_mask	= 0xffffffff,
-+		.name		= "Lantiq XWAY PEF7071",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0x030260D0,
-+		.phy_id_mask	= 0xfffffff0,
-+		.name		= "Lantiq XWAY VR9 GPHY 11G v1.3",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0xd565a408,
-+		.phy_id_mask	= 0xfffffff8,
-+		.name		= "Lantiq XWAY VR9 GPHY 11G v1.4",
-+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	}, {
-+		.phy_id		= 0xd565a418,
-+		.phy_id_mask	= 0xfffffff8,
-+		.name		= "Lantiq XWAY XRX PHY22F v1.4",
-+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
-+		.flags		= 0, /*PHY_HAS_INTERRUPT,*/
-+		.config_init	= vr9_gphy_config_init,
-+		.config_aneg	= vr9_gphy_config_aneg,
-+		.read_status	= genphy_read_status,
-+		.ack_interrupt	= vr9_gphy_ack_interrupt,
-+		.did_interrupt	= vr9_gphy_did_interrupt,
-+		.config_intr	= vr9_gphy_config_intr,
-+		.driver		= { .owner = THIS_MODULE },
-+	},
-+};
-+
-+static int __init ltq_phy_init(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) {
-+		int err = phy_driver_register(&lantiq_phy[i]);
-+		if (err)
-+			pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name);
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit ltq_phy_exit(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++)
-+		phy_driver_unregister(&lantiq_phy[i]);
-+}
-+
-+module_init(ltq_phy_init);
-+module_exit(ltq_phy_exit);
-+
-+MODULE_DESCRIPTION("Lantiq PHY drivers");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch
deleted file mode 100644
index 59430dc..0000000
--- a/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ /dev/null
@@ -1,363 +0,0 @@
-From 9664031d0f35be450330bf30ded1c359b9074251 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 28/40] NET: lantiq: adds PHY11G firmware blobs
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- firmware/Makefile       |    2 +
- firmware/lantiq/COPYING |  286 +++++++++++++++++++++++++++++++++++++++++++++++
- firmware/lantiq/README  |   45 ++++++++
- 3 files changed, 333 insertions(+)
- create mode 100644 firmware/lantiq/COPYING
- create mode 100644 firmware/lantiq/README
-
---- a/firmware/Makefile
-+++ b/firmware/Makefile
-@@ -134,6 +134,9 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P
- fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
- fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
- fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a1x.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy11g_a2x.bin
-+fw-shipped-$(CONFIG_SOC_TYPE_XWAY) += lantiq/vr9_phy22f_a1x.bin
- fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
- 
- fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
---- /dev/null
-+++ b/firmware/lantiq/COPYING
-@@ -0,0 +1,286 @@
-+All firmware files are copyrighted by Lantiq Deutschland GmbH.
-+The files have been extracted from header files found in Lantiq BSPs.
-+If not stated otherwise all files are licensed under GPL.
-+
-+=======================================================================
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+		       Version 2, June 1991
-+
-+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ Everyone is permitted to copy and distribute verbatim copies
-+ of this license document, but changing it is not allowed.
-+
-+			    Preamble
-+
-+  The licenses for most software are designed to take away your
-+freedom to share and change it.  By contrast, the GNU General Public
-+License is intended to guarantee your freedom to share and change free
-+software--to make sure the software is free for all its users.  This
-+General Public License applies to most of the Free Software
-+Foundation's software and to any other program whose authors commit to
-+using it.  (Some other Free Software Foundation software is covered by
-+the GNU Library General Public License instead.)  You can apply it to
-+your programs, too.
-+
-+  When we speak of free software, we are referring to freedom, not
-+price.  Our General Public Licenses are designed to make sure that you
-+have the freedom to distribute copies of free software (and charge for
-+this service if you wish), that you receive source code or can get it
-+if you want it, that you can change the software or use pieces of it
-+in new free programs; and that you know you can do these things.
-+
-+  To protect your rights, we need to make restrictions that forbid
-+anyone to deny you these rights or to ask you to surrender the rights.
-+These restrictions translate to certain responsibilities for you if you
-+distribute copies of the software, or if you modify it.
-+
-+  For example, if you distribute copies of such a program, whether
-+gratis or for a fee, you must give the recipients all the rights that
-+you have.  You must make sure that they, too, receive or can get the
-+source code.  And you must show them these terms so they know their
-+rights.
-+
-+  We protect your rights with two steps: (1) copyright the software, and
-+(2) offer you this license which gives you legal permission to copy,
-+distribute and/or modify the software.
-+
-+  Also, for each author's protection and ours, we want to make certain
-+that everyone understands that there is no warranty for this free
-+software.  If the software is modified by someone else and passed on, we
-+want its recipients to know that what they have is not the original, so
-+that any problems introduced by others will not reflect on the original
-+authors' reputations.
-+
-+  Finally, any free program is threatened constantly by software
-+patents.  We wish to avoid the danger that redistributors of a free
-+program will individually obtain patent licenses, in effect making the
-+program proprietary.  To prevent this, we have made it clear that any
-+patent must be licensed for everyone's free use or not licensed at all.
-+
-+  The precise terms and conditions for copying, distribution and
-+modification follow.
-+
-+		    GNU GENERAL PUBLIC LICENSE
-+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-+
-+  0. This License applies to any program or other work which contains
-+a notice placed by the copyright holder saying it may be distributed
-+under the terms of this General Public License.  The "Program", below,
-+refers to any such program or work, and a "work based on the Program"
-+means either the Program or any derivative work under copyright law:
-+that is to say, a work containing the Program or a portion of it,
-+either verbatim or with modifications and/or translated into another
-+language.  (Hereinafter, translation is included without limitation in
-+the term "modification".)  Each licensee is addressed as "you".
-+
-+Activities other than copying, distribution and modification are not
-+covered by this License; they are outside its scope.  The act of
-+running the Program is not restricted, and the output from the Program
-+is covered only if its contents constitute a work based on the
-+Program (independent of having been made by running the Program).
-+Whether that is true depends on what the Program does.
-+
-+  1. You may copy and distribute verbatim copies of the Program's
-+source code as you receive it, in any medium, provided that you
-+conspicuously and appropriately publish on each copy an appropriate
-+copyright notice and disclaimer of warranty; keep intact all the
-+notices that refer to this License and to the absence of any warranty;
-+and give any other recipients of the Program a copy of this License
-+along with the Program.
-+
-+You may charge a fee for the physical act of transferring a copy, and
-+you may at your option offer warranty protection in exchange for a fee.
-+
-+  2. You may modify your copy or copies of the Program or any portion
-+of it, thus forming a work based on the Program, and copy and
-+distribute such modifications or work under the terms of Section 1
-+above, provided that you also meet all of these conditions:
-+
-+    a) You must cause the modified files to carry prominent notices
-+    stating that you changed the files and the date of any change.
-+
-+    b) You must cause any work that you distribute or publish, that in
-+    whole or in part contains or is derived from the Program or any
-+    part thereof, to be licensed as a whole at no charge to all third
-+    parties under the terms of this License.
-+
-+    c) If the modified program normally reads commands interactively
-+    when run, you must cause it, when started running for such
-+    interactive use in the most ordinary way, to print or display an
-+    announcement including an appropriate copyright notice and a
-+    notice that there is no warranty (or else, saying that you provide
-+    a warranty) and that users may redistribute the program under
-+    these conditions, and telling the user how to view a copy of this
-+    License.  (Exception: if the Program itself is interactive but
-+    does not normally print such an announcement, your work based on
-+    the Program is not required to print an announcement.)
-+
-+These requirements apply to the modified work as a whole.  If
-+identifiable sections of that work are not derived from the Program,
-+and can be reasonably considered independent and separate works in
-+themselves, then this License, and its terms, do not apply to those
-+sections when you distribute them as separate works.  But when you
-+distribute the same sections as part of a whole which is a work based
-+on the Program, the distribution of the whole must be on the terms of
-+this License, whose permissions for other licensees extend to the
-+entire whole, and thus to each and every part regardless of who wrote it.
-+
-+Thus, it is not the intent of this section to claim rights or contest
-+your rights to work written entirely by you; rather, the intent is to
-+exercise the right to control the distribution of derivative or
-+collective works based on the Program.
-+
-+In addition, mere aggregation of another work not based on the Program
-+with the Program (or with a work based on the Program) on a volume of
-+a storage or distribution medium does not bring the other work under
-+the scope of this License.
-+
-+  3. You may copy and distribute the Program (or a work based on it,
-+under Section 2) in object code or executable form under the terms of
-+Sections 1 and 2 above provided that you also do one of the following:
-+
-+    a) Accompany it with the complete corresponding machine-readable
-+    source code, which must be distributed under the terms of Sections
-+    1 and 2 above on a medium customarily used for software interchange; or,
-+
-+    b) Accompany it with a written offer, valid for at least three
-+    years, to give any third party, for a charge no more than your
-+    cost of physically performing source distribution, a complete
-+    machine-readable copy of the corresponding source code, to be
-+    distributed under the terms of Sections 1 and 2 above on a medium
-+    customarily used for software interchange; or,
-+
-+    c) Accompany it with the information you received as to the offer
-+    to distribute corresponding source code.  (This alternative is
-+    allowed only for noncommercial distribution and only if you
-+    received the program in object code or executable form with such
-+    an offer, in accord with Subsection b above.)
-+
-+The source code for a work means the preferred form of the work for
-+making modifications to it.  For an executable work, complete source
-+code means all the source code for all modules it contains, plus any
-+associated interface definition files, plus the scripts used to
-+control compilation and installation of the executable.  However, as a
-+special exception, the source code distributed need not include
-+anything that is normally distributed (in either source or binary
-+form) with the major components (compiler, kernel, and so on) of the
-+operating system on which the executable runs, unless that component
-+itself accompanies the executable.
-+
-+If distribution of executable or object code is made by offering
-+access to copy from a designated place, then offering equivalent
-+access to copy the source code from the same place counts as
-+distribution of the source code, even though third parties are not
-+compelled to copy the source along with the object code.
-+
-+  4. You may not copy, modify, sublicense, or distribute the Program
-+except as expressly provided under this License.  Any attempt
-+otherwise to copy, modify, sublicense or distribute the Program is
-+void, and will automatically terminate your rights under this License.
-+However, parties who have received copies, or rights, from you under
-+this License will not have their licenses terminated so long as such
-+parties remain in full compliance.
-+
-+  5. You are not required to accept this License, since you have not
-+signed it.  However, nothing else grants you permission to modify or
-+distribute the Program or its derivative works.  These actions are
-+prohibited by law if you do not accept this License.  Therefore, by
-+modifying or distributing the Program (or any work based on the
-+Program), you indicate your acceptance of this License to do so, and
-+all its terms and conditions for copying, distributing or modifying
-+the Program or works based on it.
-+
-+  6. Each time you redistribute the Program (or any work based on the
-+Program), the recipient automatically receives a license from the
-+original licensor to copy, distribute or modify the Program subject to
-+these terms and conditions.  You may not impose any further
-+restrictions on the recipients' exercise of the rights granted herein.
-+You are not responsible for enforcing compliance by third parties to
-+this License.
-+
-+  7. If, as a consequence of a court judgment or allegation of patent
-+infringement or for any other reason (not limited to patent issues),
-+conditions are imposed on you (whether by court order, agreement or
-+otherwise) that contradict the conditions of this License, they do not
-+excuse you from the conditions of this License.  If you cannot
-+distribute so as to satisfy simultaneously your obligations under this
-+License and any other pertinent obligations, then as a consequence you
-+may not distribute the Program at all.  For example, if a patent
-+license would not permit royalty-free redistribution of the Program by
-+all those who receive copies directly or indirectly through you, then
-+the only way you could satisfy both it and this License would be to
-+refrain entirely from distribution of the Program.
-+
-+If any portion of this section is held invalid or unenforceable under
-+any particular circumstance, the balance of the section is intended to
-+apply and the section as a whole is intended to apply in other
-+circumstances.
-+
-+It is not the purpose of this section to induce you to infringe any
-+patents or other property right claims or to contest validity of any
-+such claims; this section has the sole purpose of protecting the
-+integrity of the free software distribution system, which is
-+implemented by public license practices.  Many people have made
-+generous contributions to the wide range of software distributed
-+through that system in reliance on consistent application of that
-+system; it is up to the author/donor to decide if he or she is willing
-+to distribute software through any other system and a licensee cannot
-+impose that choice.
-+
-+This section is intended to make thoroughly clear what is believed to
-+be a consequence of the rest of this License.
-+
-+  8. If the distribution and/or use of the Program is restricted in
-+certain countries either by patents or by copyrighted interfaces, the
-+original copyright holder who places the Program under this License
-+may add an explicit geographical distribution limitation excluding
-+those countries, so that distribution is permitted only in or among
-+countries not thus excluded.  In such case, this License incorporates
-+the limitation as if written in the body of this License.
-+
-+  9. The Free Software Foundation may publish revised and/or new versions
-+of the General Public License from time to time.  Such new versions will
-+be similar in spirit to the present version, but may differ in detail to
-+address new problems or concerns.
-+
-+Each version is given a distinguishing version number.  If the Program
-+specifies a version number of this License which applies to it and "any
-+later version", you have the option of following the terms and conditions
-+either of that version or of any later version published by the Free
-+Software Foundation.  If the Program does not specify a version number of
-+this License, you may choose any version ever published by the Free Software
-+Foundation.
-+
-+  10. If you wish to incorporate parts of the Program into other free
-+programs whose distribution conditions are different, write to the author
-+to ask for permission.  For software which is copyrighted by the Free
-+Software Foundation, write to the Free Software Foundation; we sometimes
-+make exceptions for this.  Our decision will be guided by the two goals
-+of preserving the free status of all derivatives of our free software and
-+of promoting the sharing and reuse of software generally.
-+
-+			    NO WARRANTY
-+
-+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-+REPAIR OR CORRECTION.
-+
-+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-+POSSIBILITY OF SUCH DAMAGES.
-+
-+		     END OF TERMS AND CONDITIONS
---- /dev/null
-+++ b/firmware/lantiq/README
-@@ -0,0 +1,45 @@
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+# (C) Copyright 2007 - 2012
-+# Lantiq Deutschland GmbH
-+#
-+# (C) Copyright 2012
-+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+#
-+
-+#
-+# How to use
-+#
-+Configure kernel with:
-+CONFIG_FW_LOADER=y
-+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR"
-+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES"
-+
-+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list
-+of space separated files from list below.
-+
-+#
-+# Firmware files
-+#
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/vr9_phy11g_a1x.bin
-+lantiq/vr9_phy22f_a1x.bin
-+
-+# GPHY core on Lantiq XWAY VR9 v1.1
-+lantiq/vr9_phy11g_a2x.bin
-+lantiq/vr9_phy22f_a2x.bin
diff --git a/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch b/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch
deleted file mode 100644
index b783a0d..0000000
--- a/target/linux/lantiq/patches-3.8/0029-NET-lantiq-adds-gphy-clock.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From 9dee771f3a7e51411a408cbb1070e73a50cbd285 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:47:44 +0100
-Subject: [PATCH 29/40] NET: lantiq: adds gphy clock
-
----
- arch/mips/lantiq/xway/sysctrl.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -376,6 +376,7 @@ void __init ltq_soc_init(void)
- 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- 				PMU_PPE_QSB | PMU_PPE_TOP);
-+		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
- 	} else if (of_machine_is_compatible("lantiq,ar9")) {
- 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- 				ltq_ar9_fpi_hz(), CLOCK_250M);
diff --git a/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch b/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
deleted file mode 100644
index 3c8e099..0000000
--- a/target/linux/lantiq/patches-3.8/0032-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 2fd60458657ac96ab71ba4831cfb397145b3c989 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 30 Jan 2013 21:12:47 +0100
-Subject: [PATCH 32/40] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
-
-The driver uses plat_nand. As the platform_device is loaded from DT, we need
-to lookup the node and attach our falcon specific "struct platform_nand_data"
-to it.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/Kconfig       |    8 ++++
- drivers/mtd/nand/Makefile      |    1 +
- drivers/mtd/nand/falcon_nand.c |   83 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 92 insertions(+)
- create mode 100644 drivers/mtd/nand/falcon_nand.c
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -575,4 +575,12 @@ config MTD_NAND_XWAY
- 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- 	  to the External Bus Unit (EBU).
- 
-+config MTD_NAND_FALCON
-+	tristate "Support for NAND on Lantiq FALC-ON SoC"
-+	depends on LANTIQ && SOC_FALCON
-+	select MTD_NAND_PLATFORM
-+	help
-+	  Enables support for NAND Flash chips on Lantiq FALC-ON SoCs. NAND is
-+	  attached to the External Bus Unit (EBU).
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -53,5 +53,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740
- obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
-+obj-$(CONFIG_MTD_NAND_FALCON)		+= falcon_nand.o
- 
- nand-objs := nand_base.o nand_bbt.o
---- /dev/null
-+++ b/drivers/mtd/nand/falcon_nand.c
-@@ -0,0 +1,83 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/mtd/nand.h>
-+#include <linux/of_platform.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* address lines used for NAND control signals */
-+#define NAND_ADDR_ALE		0x10000
-+#define NAND_ADDR_CLE		0x20000
-+
-+/* Ready/Busy Status */
-+#define MODCON_STS		0x0002
-+
-+/* Ready/Busy Status Edge */
-+#define MODCON_STSEDGE		0x0004
-+#define LTQ_EBU_MODCON		0x000C
-+
-+static const char const *part_probes[] = { "cmdlinepart", "ofpart", NULL };
-+
-+static int falcon_nand_ready(struct mtd_info *mtd)
-+{
-+	u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
-+
-+	return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
-+						(MODCON_STS | MODCON_STSEDGE)));
-+}
-+
-+static void falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+
-+	if (ctrl & NAND_CTRL_CHANGE) {
-+		nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
-+
-+		if (ctrl & NAND_CLE)
-+			nandaddr |= NAND_ADDR_CLE;
-+		if (ctrl & NAND_ALE)
-+			nandaddr |= NAND_ADDR_ALE;
-+
-+		this->IO_ADDR_W = (void __iomem *) nandaddr;
-+	}
-+
-+	if (cmd != NAND_CMD_NONE)
-+		writeb(cmd, this->IO_ADDR_W);
-+}
-+
-+static struct platform_nand_data falcon_nand_data = {
-+	.chip = {
-+		.nr_chips		= 1,
-+		.chip_delay		= 25,
-+		.part_probe_types	= part_probes,
-+	},
-+	.ctrl = {
-+		.cmd_ctrl		= falcon_hwcontrol,
-+		.dev_ready		= falcon_nand_ready,
-+	}
-+};
-+
-+int __init falcon_register_nand(void)
-+{
-+	struct device_node *node;
-+	struct platform_device *pdev;
-+
-+	node = of_find_compatible_node(NULL, NULL, "lantiq,nand-falcon");
-+	if (!node)
-+		return -1;
-+	pdev = of_find_device_by_node(node);
-+	if (pdev)
-+		pdev->dev.platform_data = &falcon_nand_data;
-+	of_node_put(node);
-+	return 0;
-+}
-+
-+arch_initcall(falcon_register_nand);
diff --git a/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch b/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch
deleted file mode 100644
index 92da423..0000000
--- a/target/linux/lantiq/patches-3.8/0033-MTD-lantiq-xway-make-nand-actually-work.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From cc77f36d2ea812027dc2a8a94c788c4c145f82dc Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 10:25:39 +0200
-Subject: [PATCH 33/40] MTD: lantiq: xway: make nand actually work
-
-http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   54 +++++++++++++++++++++++++++++++++++-------
- 1 file changed, 45 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,19 +54,29 @@
- #define NAND_CON_CSMUX		(1 << 1)
- #define NAND_CON_NANDM		1
- 
-+static u32 xway_latchcmd;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
- 	unsigned long flags;
-+	unsigned long timeout;
- 
- 	nandaddr &= ~NAND_WRITE_ADDR;
- 	nandaddr |= NAND_WRITE_CMD;
- 
- 	/* finish with a reset */
-+	timeout = jiffies + msecs_to_jiffies(200);
-+
- 	spin_lock_irqsave(&ebu_lock, flags);
-+
- 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
--	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
--		;
-+	do {
-+		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+			break;
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- }
- 
-@@ -94,17 +104,15 @@ static void xway_cmd_ctrl(struct mtd_inf
- 	unsigned long flags;
- 
- 	if (ctrl & NAND_CTRL_CHANGE) {
--		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
- 		if (ctrl & NAND_CLE)
--			nandaddr |= NAND_WRITE_CMD;
--		else
--			nandaddr |= NAND_WRITE_ADDR;
--		this->IO_ADDR_W = (void __iomem *) nandaddr;
-+			xway_latchcmd = NAND_WRITE_CMD;
-+		else if (ctrl & NAND_ALE)
-+			xway_latchcmd = NAND_WRITE_ADDR;
- 	}
- 
- 	if (cmd != NAND_CMD_NONE) {
- 		spin_lock_irqsave(&ebu_lock, flags);
--		writeb(cmd, this->IO_ADDR_W);
-+		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 			;
- 		spin_unlock_irqrestore(&ebu_lock, flags);
-@@ -124,12 +132,38 @@ static unsigned char xway_read_byte(stru
- 	int ret;
- 
- 	spin_lock_irqsave(&ebu_lock, flags);
--	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
-+	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- 
- 	return ret;
- }
- 
-+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
-+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		ltq_w8(buf[i], (void __iomem *)nandaddr);
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
- static int xway_nand_probe(struct platform_device *pdev)
- {
- 	struct nand_chip *this = platform_get_drvdata(pdev);
-@@ -175,6 +209,8 @@ static struct platform_nand_data xway_na
- 		.dev_ready	= xway_dev_ready,
- 		.select_chip	= xway_select_chip,
- 		.read_byte	= xway_read_byte,
-+		.read_buf	= xway_read_buf,
-+		.write_buf	= xway_write_buf,
- 	}
- };
- 
diff --git a/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
deleted file mode 100644
index 6315f2b..0000000
--- a/target/linux/lantiq/patches-3.8/0034-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 88bc909507f7e9347a24e38185a11a38e51cc773 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:04:34 +0100
-Subject: [PATCH 34/40] MTD: lantiq: handle NO_XIP on cfi0001 flash
-
----
- drivers/mtd/maps/lantiq-flash.c |    6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -134,7 +134,11 @@ ltq_mtd_probe(struct platform_device *pd
- 	}
- 
- 	ltq_mtd->map = kzalloc(sizeof(struct map_info), GFP_KERNEL);
--	ltq_mtd->map->phys = ltq_mtd->res->start;
-+	if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL))
-+		ltq_mtd->map->phys = NO_XIP;
-+	else
-+		ltq_mtd->map->phys = ltq_mtd->res->start;
-+	ltq_mtd->res->start;
- 	ltq_mtd->map->size = resource_size(ltq_mtd->res);
- 	ltq_mtd->map->virt = devm_request_and_ioremap(&pdev->dev, ltq_mtd->res);
- 	if (!ltq_mtd->map->virt) {
diff --git a/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch
deleted file mode 100644
index 7058a5b..0000000
--- a/target/linux/lantiq/patches-3.8/0036-owrt-lantiq-dtb-image-hack.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 5128799df668a7ff5b2861fab39f9f788369eb43 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 36/40] owrt: lantiq dtb image hack
-
----
- arch/mips/lantiq/Makefile |    2 --
- arch/mips/lantiq/prom.c   |    4 +++-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/lantiq/Makefile
-+++ b/arch/mips/lantiq/Makefile
-@@ -6,8 +6,6 @@
- 
- obj-y := irq.o clk.o prom.o
- 
--obj-y += dts/
--
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
- 
- obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -57,6 +57,8 @@ static void __init prom_init_cmdline(voi
- 	}
- }
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init plat_mem_setup(void)
- {
- 	ioport_resource.start = IOPORT_RESOURCE_START;
-@@ -70,7 +72,7 @@ void __init plat_mem_setup(void)
- 	 * Load the builtin devicetree. This causes the chosen node to be
- 	 * parsed resulting in our memory appearing
- 	 */
--	__dt_setup_arch(&__dtb_start);
-+	__dt_setup_arch(&__image_dtb);
- }
- 
- void __init device_tree_init(void)
diff --git a/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
deleted file mode 100644
index 61bc988..0000000
--- a/target/linux/lantiq/patches-3.8/0037-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ /dev/null
@@ -1,626 +0,0 @@
-From 0c9b05716ac0e597ae0f81a96ff68e54716decc9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:02:58 +0100
-Subject: [PATCH 37/40] owrt: lantiq: wifi and ethernet eeprom handling
-
----
- arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |    6 +
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
- arch/mips/lantiq/xway/Makefile                     |    3 +
- arch/mips/lantiq/xway/ath_eep.c                    |  206 ++++++++++++++++++++
- arch/mips/lantiq/xway/eth_mac.c                    |   76 ++++++++
- arch/mips/lantiq/xway/pci-ath-fixup.c              |  109 +++++++++++
- arch/mips/lantiq/xway/rt_eep.c                     |   60 ++++++
- drivers/net/ethernet/lantiq_etop.c                 |   10 +-
- 8 files changed, 469 insertions(+), 4 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
- create mode 100644 arch/mips/lantiq/xway/ath_eep.c
- create mode 100644 arch/mips/lantiq/xway/eth_mac.c
- create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
- create mode 100644 arch/mips/lantiq/xway/rt_eep.c
-
-Index: linux-3.8.13/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h	2013-07-25 20:47:01.531327796 +0200
-@@ -0,0 +1,6 @@
-+#ifndef _PCI_ATH_FIXUP
-+#define _PCI_ATH_FIXUP
-+
-+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-+
-+#endif /* _PCI_ATH_FIXUP */
-Index: linux-3.8.13/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-===================================================================
---- linux-3.8.13.orig/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h	2013-07-25 20:46:52.599327583 +0200
-+++ linux-3.8.13/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h	2013-07-25 20:47:01.531327796 +0200
-@@ -90,5 +90,8 @@
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
- 
-+/* allow the ethernet driver to load a flash mapped mac addr */
-+const u8* ltq_get_eth_mac(void);
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
-Index: linux-3.8.13/arch/mips/lantiq/xway/Makefile
-===================================================================
---- linux-3.8.13.orig/arch/mips/lantiq/xway/Makefile	2013-07-25 20:47:01.371327792 +0200
-+++ linux-3.8.13/arch/mips/lantiq/xway/Makefile	2013-07-25 21:31:31.287391412 +0200
-@@ -1,3 +1,6 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
- 
-+obj-y += eth_mac.o
-+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
-+
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-Index: linux-3.8.13/arch/mips/lantiq/xway/ath_eep.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/lantiq/xway/ath_eep.c	2013-07-25 20:47:01.535327796 +0200
-@@ -0,0 +1,248 @@
-+/*
-+ *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
-+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
-+ *  Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *  Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ath5k_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/pci.h>
-+#include <linux/err.h>
-+#include <linux/mtd/mtd.h>
-+#include <pci-ath-fixup.h>
-+#include <lantiq_soc.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+struct ath5k_platform_data ath5k_pdata;
-+struct ath9k_platform_data ath9k_pdata = {
-+	.led_pin = -1,
-+};
-+static u8 athxk_eeprom_mac[6];
-+
-+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath9k_pdata;
-+	return 0;
-+}
-+
-+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
-+	int mac_offset;
-+	u32 mac_inc = 0, pci_slot = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath9k_pdata.eeprom_data);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		memcpy_fromio(ath9k_pdata.eeprom_data, eep,
-+				ATH9K_PLAT_EEP_MAX_WORDS << 1);
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
-+			ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
-+
-+	if (of_find_property(np, "ath,eep-endian", NULL)) {
-+		ath9k_pdata.endian_check = true;
-+
-+		dev_info(&pdev->dev, "endian check enabled.\n");
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+		memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data + mac_offset, 6);
-+	} else if (mac_res) {
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+	} else if (ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+	else {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath9k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
-+
-+	if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
-+		ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
-+
-+		dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
-+	}
-+
-+	dev_info(&pdev->dev, "loaded ath9k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath9k_eeprom_ids[] = {
-+	{ .compatible = "ath9k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath9k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath9k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath9k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath9k_eeprom_init(void)
-+{
-+	return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
-+}
-+late_initcall(of_ath9k_eeprom_init);
-+
-+
-+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &ath5k_pdata;
-+	return 0;
-+}
-+
-+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *eep_res, *mac_res = NULL;
-+	void __iomem *eep, *mac;
-+	int mac_offset;
-+	u32 mac_inc = 0;
-+	int i;
-+	struct mtd_info *the_mtd;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	phandle phandle;
-+
-+	if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list),
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen,
-+				(void *) ath5k_pdata.eeprom_data);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
-+				|| i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+		if (!eep_res) {
-+			dev_err(&pdev->dev, "failed to load eeprom address\n");
-+			return -ENODEV;
-+		}
-+		if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
-+			dev_err(&pdev->dev, "eeprom has an invalid size\n");
-+			return -EINVAL;
-+		}
-+
-+		eep = ioremap(eep_res->start, resource_size(eep_res));
-+		memcpy_fromio(ath5k_pdata.eeprom_data, eep,
-+				ATH5K_PLAT_EEP_MAX_WORDS << 1);
-+	}
-+
-+	if (of_find_property(np, "ath,eep-swap", NULL))
-+		for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
-+			ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
-+
-+	if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+		memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
-+	} else if (mac_res) {
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(athxk_eeprom_mac, mac, 6);
-+	} else if (ltq_get_eth_mac())
-+		memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
-+	else {
-+		dev_warn(&pdev->dev, "using random mac\n");
-+		random_ether_addr(athxk_eeprom_mac);
-+	}
-+
-+	if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
-+		athxk_eeprom_mac[5] += mac_inc;
-+
-+	ath5k_pdata.macaddr = athxk_eeprom_mac;
-+	ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
-+
-+	dev_info(&pdev->dev, "loaded ath5k eeprom\n");
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ath5k_eeprom_ids[] = {
-+	{ .compatible = "ath5k,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ath5k_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ath5k,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ath5k_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ath5k_eeprom_init(void)
-+{
-+	return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
-+}
-+device_initcall(of_ath5k_eeprom_init);
-Index: linux-3.8.13/arch/mips/lantiq/xway/eth_mac.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/lantiq/xway/eth_mac.c	2013-07-25 21:28:37.743387278 +0200
-@@ -0,0 +1,98 @@
-+/*
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/if_ether.h>
-+#include <linux/mtd/mtd.h>
-+
-+static u8 eth_mac[6];
-+static int eth_mac_set;
-+
-+const u8* ltq_get_eth_mac(void)
-+{
-+	return eth_mac;
-+}
-+
-+static int __init setup_ethaddr(char *str)
-+{
-+	eth_mac_set = mac_pton(str, eth_mac);
-+	return !eth_mac_set;
-+}
-+__setup("ethaddr=", setup_ethaddr);
-+
-+int __init of_eth_mac_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node, *mtd_np;
-+	struct resource *mac_res;
-+	void __iomem *mac;
-+	u32 mac_inc = 0;
-+	phandle phandle;
-+	size_t flash_readlen;
-+	const __be32 *list;
-+	const char *part;
-+	struct mtd_info *the_mtd;
-+	int i;
-+
-+	if (eth_mac_set) {
-+		dev_err(&pdev->dev, "mac was already set by bootloader\n");
-+		return -EINVAL;
-+	}
-+	if ((list = of_get_property(np, "ath,eep-mac", &i)) && i == 2 *
-+			sizeof(*list) && (phandle = be32_to_cpup(list++)) &&
-+			(mtd_np = of_find_node_by_phandle(phandle)) && ((part =
-+			of_get_property(mtd_np, "label", NULL)) || (part =
-+			mtd_np->name)) && (the_mtd = get_mtd_device_nm(part))
-+			!= ERR_PTR(-ENODEV)) {
-+		i = mtd_read(the_mtd, be32_to_cpup(list), 6, &flash_readlen,
-+					(void *) eth_mac);
-+		put_mtd_device(the_mtd);
-+		if ((sizeof(eth_mac) != flash_readlen) || i) {
-+			dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
-+			return -ENODEV;
-+		}
-+	} else {
-+		mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+		if (!mac_res) {
-+			dev_err(&pdev->dev, "failed to load mac\n");
-+			return -EINVAL;
-+		}
-+		if (resource_size(mac_res) != 6) {
-+			dev_err(&pdev->dev, "mac has an invalid size\n");
-+			return -EINVAL;
-+		}
-+		mac = ioremap(mac_res->start, resource_size(mac_res));
-+		memcpy_fromio(eth_mac, mac, 6);
-+
-+	}
-+	if (!of_property_read_u32(np, "mac-increment", &mac_inc))
-+		eth_mac[5] += mac_inc;
-+
-+	return 0;
-+}
-+
-+static struct of_device_id eth_mac_ids[] = {
-+	{ .compatible = "lantiq,eth-mac" },
-+	{ /* sentinel */ }
-+};
-+
-+static struct platform_driver eth_mac_driver = {
-+	.driver		= {
-+		.name		= "lantiq,eth-mac",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(eth_mac_ids),
-+	},
-+};
-+
-+static int __init of_eth_mac_init(void)
-+{
-+	return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
-+}
-+device_initcall(of_eth_mac_init);
-Index: linux-3.8.13/arch/mips/lantiq/xway/pci-ath-fixup.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/lantiq/xway/pci-ath-fixup.c	2013-07-25 20:47:01.535327796 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <lantiq_soc.h>
-+
-+#define LTQ_PCI_MEM_BASE		0x18000000
-+
-+struct ath_fixup {
-+	u16		*cal_data;
-+	unsigned	slot;
-+};
-+
-+static int ath_num_fixups;
-+static struct ath_fixup ath_fixups[2];
-+
-+static void ath_pci_fixup(struct pci_dev *dev)
-+{
-+	void __iomem *mem;
-+	u16 *cal_data = NULL;
-+	u16 cmd;
-+	u32 bar0;
-+	u32 val;
-+	unsigned i;
-+
-+	for (i = 0; i < ath_num_fixups; i++) {
-+		if (ath_fixups[i].cal_data == NULL)
-+			continue;
-+
-+		if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
-+			continue;
-+
-+		cal_data = ath_fixups[i].cal_data;
-+		break;
-+	}
-+
-+	if (cal_data == NULL)
-+		return;
-+
-+	if (*cal_data != 0xa55a) {
-+		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+	mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
-+	if (!mem) {
-+		pr_err("pci %s: ioremap error\n", pci_name(dev));
-+		return;
-+	}
-+
-+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	/* set pointer to first reg address */
-+	cal_data += 3;
-+	while (*cal_data != 0xffff) {
-+		u32 reg;
-+		reg = *cal_data++;
-+		val = *cal_data++;
-+		val |= (*cal_data++) << 16;
-+
-+		ltq_w32(swab32(val), mem + reg);
-+		udelay(100);
-+	}
-+
-+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+	dev->vendor = val & 0xffff;
-+	dev->device = (val >> 16) & 0xffff;
-+
-+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+	dev->revision = val & 0xff;
-+	dev->class = val >> 8; /* upper 3 bytes */
-+
-+	pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
-+		pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-+
-+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+	pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+	iounmap(mem);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-+
-+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-+{
-+	if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
-+		return;
-+
-+	ath_fixups[ath_num_fixups].slot = slot;
-+	ath_fixups[ath_num_fixups].cal_data = cal_data;
-+	ath_num_fixups++;
-+}
-Index: linux-3.8.13/arch/mips/lantiq/xway/rt_eep.c
-===================================================================
---- /dev/null	1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.13/arch/mips/lantiq/xway/rt_eep.c	2013-07-25 20:47:01.535327796 +0200
-@@ -0,0 +1,60 @@
-+/*
-+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
-+static struct rt2x00_platform_data rt2x00_pdata;
-+
-+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+	dev->dev.platform_data = &rt2x00_pdata;
-+	return 0;
-+}
-+
-+int __init of_ralink_eeprom_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	const char *eeprom;
-+
-+	if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
-+		dev_err(&pdev->dev, "failed to load eeprom filename\n");
-+		return 0;
-+	}
-+
-+	rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+//	rt2x00_pdata.mac_address = mac;
-+	ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
-+
-+	dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
-+
-+	return 0;
-+}
-+
-+static struct of_device_id ralink_eeprom_ids[] = {
-+	{ .compatible = "ralink,eeprom" },
-+	{ }
-+};
-+
-+static struct platform_driver ralink_eeprom_driver = {
-+	.driver		= {
-+		.name		= "ralink,eeprom",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(ralink_eeprom_ids),
-+	},
-+};
-+
-+static int __init of_ralink_eeprom_init(void)
-+{
-+	return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
-+}
-+device_initcall(of_ralink_eeprom_init);
-Index: linux-3.8.13/drivers/net/ethernet/lantiq_etop.c
-===================================================================
---- linux-3.8.13.orig/drivers/net/ethernet/lantiq_etop.c	2013-07-25 20:46:52.599327583 +0200
-+++ linux-3.8.13/drivers/net/ethernet/lantiq_etop.c	2013-07-25 20:47:01.535327796 +0200
-@@ -829,7 +829,8 @@
- 
- 	ltq_etop_change_mtu(dev, 1500);
- 
--	memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
-+	if (priv->mac)
-+		memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
- 	if (!is_valid_ether_addr(mac.sa_data)) {
- 		pr_warn("etop: invalid MAC, using random\n");
- 		random_ether_addr(mac.sa_data);
-@@ -888,8 +889,7 @@
- 	.ndo_tx_timeout = ltq_etop_tx_timeout,
- };
- 
--static int __devinit
--ltq_etop_probe(struct platform_device *pdev)
-+static int ltq_etop_probe(struct platform_device *pdev)
- {
- 	struct net_device *dev;
- 	struct ltq_etop_priv *priv;
-@@ -953,7 +953,9 @@
- 	priv->tx_irq = irqres[0].start;
- 	priv->rx_irq = irqres[1].start;
- 	priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
--	priv->mac = of_get_mac_address(pdev->dev.of_node);
-+	priv->mac = ltq_get_eth_mac();
-+	if (!priv->mac)
-+		priv->mac = of_get_mac_address(pdev->dev.of_node);
- 
- 	priv->clk_ppe = clk_get(&pdev->dev, NULL);
- 	if (IS_ERR(priv->clk_ppe))
diff --git a/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch b/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch
deleted file mode 100644
index da5fb2c..0000000
--- a/target/linux/lantiq/patches-3.8/0038-owrt-lantiq-handle-vmmc-memory-reservation.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 6af001cc662f4aa3740c550ac43c6b6f75df67c8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:04:01 +0100
-Subject: [PATCH 38/40] owrt: lantiq: handle vmmc memory reservation
-
----
- arch/mips/lantiq/xway/Makefile |    2 +-
- arch/mips/lantiq/xway/vmmc.c   |   63 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/lantiq/xway/vmmc.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,6 +1,6 @@
- obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
- 
--obj-y += eth_mac.o
-+obj-y += eth_mac.o vmmc.o
- obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
- 
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/vmmc.c
-@@ -0,0 +1,63 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_gpio.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <lantiq_soc.h>
-+
-+static unsigned int *cp1_base = 0;
-+unsigned int* ltq_get_cp1_base(void)
-+{
-+	if (!cp1_base)
-+		panic("no cp1 base was set\n");
-+	return cp1_base;
-+}
-+EXPORT_SYMBOL(ltq_get_cp1_base);
-+
-+static int vmmc_probe(struct platform_device *pdev)
-+{
-+#define CP1_SIZE       (1 << 20)
-+	int gpio_count;
-+	dma_addr_t dma;
-+	cp1_base =
-+		(void*)CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE, &dma, GFP_ATOMIC));
-+
-+	gpio_count = of_gpio_count(pdev->dev.of_node);
-+	while (gpio_count) {
-+		enum of_gpio_flags flags;
-+		int gpio = of_get_gpio_flags(pdev->dev.of_node, --gpio_count, &flags);
-+		if (gpio_request(gpio, "vmmc-relay"))
-+			continue;
-+		dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
-+		gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
-+	}
-+
-+	dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id vmmc_match[] = {
-+	{ .compatible = "lantiq,vmmc" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, vmmc_match);
-+
-+static struct platform_driver vmmc_driver = {
-+	.probe = vmmc_probe,
-+	.driver = {
-+		.name = "lantiq,vmmc",
-+		.owner = THIS_MODULE,
-+		.of_match_table = vmmc_match,
-+	},
-+};
-+
-+module_platform_driver(vmmc_driver);
diff --git a/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch
deleted file mode 100644
index 16d7752..0000000
--- a/target/linux/lantiq/patches-3.8/0039-owrt-lantiq-backport-old-timer-code.patch
+++ /dev/null
@@ -1,1027 +0,0 @@
-From 225313fe4112a487954e7f7e3be995854b7c9ffa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:01:49 +0100
-Subject: [PATCH 39/40] owrt: lantiq: backport old timer code
-
----
- arch/mips/include/asm/mach-lantiq/lantiq_timer.h |  155 ++++
- arch/mips/lantiq/xway/Makefile                   |    2 +-
- arch/mips/lantiq/xway/timer.c                    |  845 ++++++++++++++++++++++
- 3 files changed, 1001 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
- create mode 100644 arch/mips/lantiq/xway/timer.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-@@ -0,0 +1,155 @@
-+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+
-+
-+/******************************************************************************
-+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-+
-+                               No Warranty
-+   Because the program is licensed free of charge, there is no warranty for
-+   the program, to the extent permitted by applicable law.  Except when
-+   otherwise stated in writing the copyright holders and/or other parties
-+   provide the program "as is" without warranty of any kind, either
-+   expressed or implied, including, but not limited to, the implied
-+   warranties of merchantability and fitness for a particular purpose. The
-+   entire risk as to the quality and performance of the program is with
-+   you.  should the program prove defective, you assume the cost of all
-+   necessary servicing, repair or correction.
-+
-+   In no event unless required by applicable law or agreed to in writing
-+   will any copyright holder, or any other party who may modify and/or
-+   redistribute the program as permitted above, be liable to you for
-+   damages, including any general, special, incidental or consequential
-+   damages arising out of the use or inability to use the program
-+   (including but not limited to loss of data or data being rendered
-+   inaccurate or losses sustained by you or third parties or a failure of
-+   the program to operate with any other programs), even if such holder or
-+   other party has been advised of the possibility of such damages.
-+******************************************************************************/
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*
-+ *  Available Timer/Counter Index
-+ */
-+#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
-+#define TIMER_ANY                       0x00
-+#define TIMER1A                         TIMER(1, 0)
-+#define TIMER1B                         TIMER(1, 1)
-+#define TIMER2A                         TIMER(2, 0)
-+#define TIMER2B                         TIMER(2, 1)
-+#define TIMER3A                         TIMER(3, 0)
-+#define TIMER3B                         TIMER(3, 1)
-+
-+/*
-+ *  Flag of Timer/Counter
-+ *  These flags specify the way in which timer is configured.
-+ */
-+/*  Bit size of timer/counter.                      */
-+#define TIMER_FLAG_16BIT                0x0000
-+#define TIMER_FLAG_32BIT                0x0001
-+/*  Switch between timer and counter.               */
-+#define TIMER_FLAG_TIMER                0x0000
-+#define TIMER_FLAG_COUNTER              0x0002
-+/*  Stop or continue when overflowing/underflowing. */
-+#define TIMER_FLAG_ONCE                 0x0000
-+#define TIMER_FLAG_CYCLIC               0x0004
-+/*  Count up or counter down.                       */
-+#define TIMER_FLAG_UP                   0x0000
-+#define TIMER_FLAG_DOWN                 0x0008
-+/*  Count on specific level or edge.                */
-+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
-+#define TIMER_FLAG_RISE_EDGE            0x0010
-+#define TIMER_FLAG_FALL_EDGE            0x0020
-+#define TIMER_FLAG_ANY_EDGE             0x0030
-+/*  Signal is syncronous to module clock or not.    */
-+#define TIMER_FLAG_UNSYNC               0x0000
-+#define TIMER_FLAG_SYNC                 0x0080
-+/*  Different interrupt handle type.                */
-+#define TIMER_FLAG_NO_HANDLE            0x0000
-+#if defined(__KERNEL__)
-+    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
-+#endif  //  defined(__KERNEL__)
-+#define TIMER_FLAG_SIGNAL               0x0300
-+/*  Internal clock source or external clock source  */
-+#define TIMER_FLAG_INT_SRC              0x0000
-+#define TIMER_FLAG_EXT_SRC              0x1000
-+
-+
-+/*
-+ *  ioctl Command
-+ */
-+#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
-+#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
-+#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
-+#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
-+#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
-+#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
-+#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
-+#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
-+
-+/*
-+ *  Data Type Used to Call ioctl
-+ */
-+struct gptu_ioctl_param {
-+    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
-+                                                 *  timer/counter. If it's zero, a timer/counter would  *
-+                                                 *  be dynamically allocated and ID would be stored in  *
-+                                                 *  this field.                                         *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
-+                                                 *  ignored.                                            *
-+                                                 *  In other command, this field is ID of timer/counter *
-+                                                 *  allocated.                                          */
-+    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-+                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
-+                                                 *  specify how to configure timer/counter.             *
-+                                                 *  In command GPTU_START_TIMER, zero indicate start    *
-+                                                 *  and non-zero indicate resume timer/counter.         *
-+                                                 *  In other command, this field is ignored.            */
-+    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
-+                                                 *  init/reload value.                                  *
-+                                                 *  In command GPTU_SET_TIMER, this field contains      *
-+                                                 *  frequency (0.001Hz) of timer.                       *
-+                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
-+                                                 *  value would be stored in this field.                *
-+                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
-+                                                 *  contains frequency wanted, and after calculation,   *
-+                                                 *  divider would be stored in this field to overwrite  *
-+                                                 *  the frequency.                                      *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains process  *
-+                                                 *  ID to which signal would be sent.                   *
-+                                                 *  In other command, this field is ignored.            */
-+    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-+                                                 *  if signal is required, this field contains signal   *
-+                                                 *  number which would be sent.                         *
-+                                                 *  In other command, this field is ignored.            */
-+};
-+
-+/*
-+ * ####################################
-+ *              Data Type
-+ * ####################################
-+ */
-+typedef void (*timer_callback)(unsigned long arg);
-+
-+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-+extern int lq_free_timer(unsigned int);
-+extern int lq_start_timer(unsigned int, int);
-+extern int lq_stop_timer(unsigned int);
-+extern int lq_reset_counter_flags(u32 timer, u32 flags);
-+extern int lq_get_count_value(unsigned int, unsigned long *);
-+extern u32 lq_cal_divider(unsigned long);
-+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-+extern int lq_set_counter(unsigned int timer, unsigned int flag,
-+	u32 reload, unsigned long arg1, unsigned long arg2);
-+
-+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
- 
- obj-y += eth_mac.o vmmc.o
- obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,845 @@
-+#ifndef CONFIG_SOC_AMAZON_SE
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+#include "../clk.h"
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_timer.h>
-+
-+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS	6
-+
-+#ifdef TIMER1A
-+#define FIRST_TIMER			TIMER1A
-+#else
-+#define FIRST_TIMER			2
-+#endif
-+
-+/*
-+ *  GPTC divider is set or not.
-+ */
-+#define GPTU_CLC_RMC_IS_SET		0
-+
-+/*
-+ *  Timer Interrupt (IRQ)
-+ */
-+/*  Must be adjusted when ICU driver is available */
-+#define TIMER_INTERRUPT			(INT_NUM_IM3_IRL0 + 22)
-+
-+/*
-+ *  Bits Operation
-+ */
-+#define GET_BITS(x, msb, lsb)		\
-+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+#define SET_BITS(x, msb, lsb, value)	\
-+	(((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
-+	(((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-+
-+/*
-+ *  GPTU Register Mapping
-+ */
-+#define LQ_GPTU			(KSEG1 + 0x1E100A00)
-+#define LQ_GPTU_CLC		((volatile u32 *)(LQ_GPTU + 0x0000))
-+#define LQ_GPTU_ID			((volatile u32 *)(LQ_GPTU + 0x0008))
-+#define LQ_GPTU_CON(n, X)		((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RUN(n, X)		((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_RELOAD(n, X)	((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_COUNT(n, X)	((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020))	/* X must be either A or B */
-+#define LQ_GPTU_IRNEN		((volatile u32 *)(LQ_GPTU + 0x00F4))
-+#define LQ_GPTU_IRNICR		((volatile u32 *)(LQ_GPTU + 0x00F8))
-+#define LQ_GPTU_IRNCR		((volatile u32 *)(LQ_GPTU + 0x00FC))
-+
-+/*
-+ *  Clock Control Register
-+ */
-+#define GPTU_CLC_SMC			GET_BITS(*LQ_GPTU_CLC, 23, 16)
-+#define GPTU_CLC_RMC			GET_BITS(*LQ_GPTU_CLC, 15, 8)
-+#define GPTU_CLC_FSOE			(*LQ_GPTU_CLC & (1 << 5))
-+#define GPTU_CLC_EDIS			(*LQ_GPTU_CLC & (1 << 3))
-+#define GPTU_CLC_SPEN			(*LQ_GPTU_CLC & (1 << 2))
-+#define GPTU_CLC_DISS			(*LQ_GPTU_CLC & (1 << 1))
-+#define GPTU_CLC_DISR			(*LQ_GPTU_CLC & (1 << 0))
-+
-+#define GPTU_CLC_SMC_SET(value)		SET_BITS(0, 23, 16, (value))
-+#define GPTU_CLC_RMC_SET(value)		SET_BITS(0, 15, 8, (value))
-+#define GPTU_CLC_FSOE_SET(value)	((value) ? (1 << 5) : 0)
-+#define GPTU_CLC_SBWE_SET(value)	((value) ? (1 << 4) : 0)
-+#define GPTU_CLC_EDIS_SET(value)	((value) ? (1 << 3) : 0)
-+#define GPTU_CLC_SPEN_SET(value)	((value) ? (1 << 2) : 0)
-+#define GPTU_CLC_DISR_SET(value)	((value) ? (1 << 0) : 0)
-+
-+/*
-+ *  ID Register
-+ */
-+#define GPTU_ID_ID			GET_BITS(*LQ_GPTU_ID, 15, 8)
-+#define GPTU_ID_CFG			GET_BITS(*LQ_GPTU_ID, 7, 5)
-+#define GPTU_ID_REV			GET_BITS(*LQ_GPTU_ID, 4, 0)
-+
-+/*
-+ *  Control Register of Timer/Counter nX
-+ *    n is the index of block (1 based index)
-+ *    X is either A or B
-+ */
-+#define GPTU_CON_SRC_EG(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 10))
-+#define GPTU_CON_SRC_EXT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 9))
-+#define GPTU_CON_SYNC(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 8))
-+#define GPTU_CON_EDGE(n, X)		GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-+#define GPTU_CON_INV(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 5))
-+#define GPTU_CON_EXT(n, X)		(*LQ_GPTU_CON(n, A) & (1 << 4))	/* Timer/Counter B does not have this bit */
-+#define GPTU_CON_STP(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 3))
-+#define GPTU_CON_CNT(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 2))
-+#define GPTU_CON_DIR(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 1))
-+#define GPTU_CON_EN(n, X)		(*LQ_GPTU_CON(n, X) & (1 << 0))
-+
-+#define GPTU_CON_SRC_EG_SET(value)	((value) ? 0 : (1 << 10))
-+#define GPTU_CON_SRC_EXT_SET(value)	((value) ? (1 << 9) : 0)
-+#define GPTU_CON_SYNC_SET(value)	((value) ? (1 << 8) : 0)
-+#define GPTU_CON_EDGE_SET(value)	SET_BITS(0, 7, 6, (value))
-+#define GPTU_CON_INV_SET(value)		((value) ? (1 << 5) : 0)
-+#define GPTU_CON_EXT_SET(value)		((value) ? (1 << 4) : 0)
-+#define GPTU_CON_STP_SET(value)		((value) ? (1 << 3) : 0)
-+#define GPTU_CON_CNT_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_CON_DIR_SET(value)		((value) ? (1 << 1) : 0)
-+
-+#define GPTU_RUN_RL_SET(value)		((value) ? (1 << 2) : 0)
-+#define GPTU_RUN_CEN_SET(value)		((value) ? (1 << 1) : 0)
-+#define GPTU_RUN_SEN_SET(value)		((value) ? (1 << 0) : 0)
-+
-+#define GPTU_IRNEN_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+#define GPTU_IRNCR_TC_SET(n, X, value)	((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+
-+#define TIMER_FLAG_MASK_SIZE(x)		(x & 0x0001)
-+#define TIMER_FLAG_MASK_TYPE(x)		(x & 0x0002)
-+#define TIMER_FLAG_MASK_STOP(x)		(x & 0x0004)
-+#define TIMER_FLAG_MASK_DIR(x)		(x & 0x0008)
-+#define TIMER_FLAG_NONE_EDGE		0x0000
-+#define TIMER_FLAG_MASK_EDGE(x)		(x & 0x0030)
-+#define TIMER_FLAG_REAL			0x0000
-+#define TIMER_FLAG_INVERT		0x0040
-+#define TIMER_FLAG_MASK_INVERT(x)	(x & 0x0040)
-+#define TIMER_FLAG_MASK_TRIGGER(x)	(x & 0x0070)
-+#define TIMER_FLAG_MASK_SYNC(x)		(x & 0x0080)
-+#define TIMER_FLAG_CALLBACK_IN_HB	0x0200
-+#define TIMER_FLAG_MASK_HANDLE(x)	(x & 0x0300)
-+#define TIMER_FLAG_MASK_SRC(x)		(x & 0x1000)
-+
-+struct timer_dev_timer {
-+	unsigned int f_irq_on;
-+	unsigned int irq;
-+	unsigned int flag;
-+	unsigned long arg1;
-+	unsigned long arg2;
-+};
-+
-+struct timer_dev {
-+	struct mutex gptu_mutex;
-+	unsigned int number_of_timers;
-+	unsigned int occupation;
-+	unsigned int f_gptu_on;
-+	struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-+};
-+
-+
-+unsigned int ltq_get_fpi_bus_clock(int fpi) {
-+	struct clk *clk = clk_get_fpi();
-+	return clk_get_rate(clk);
-+}
-+
-+
-+static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-+static int gptu_open(struct inode *, struct file *);
-+static int gptu_release(struct inode *, struct file *);
-+
-+static struct file_operations gptu_fops = {
-+	.owner = THIS_MODULE,
-+	.unlocked_ioctl = gptu_ioctl,
-+	.open = gptu_open,
-+	.release = gptu_release
-+};
-+
-+static struct miscdevice gptu_miscdev = {
-+	.minor = MISC_DYNAMIC_MINOR,
-+	.name = "gptu",
-+	.fops = &gptu_fops,
-+};
-+
-+static struct timer_dev timer_dev;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *p)
-+{
-+	unsigned int timer;
-+	unsigned int flag;
-+	struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-+
-+	timer = irq - TIMER_INTERRUPT;
-+	if (timer < timer_dev.number_of_timers
-+		&& dev_timer == &timer_dev.timer[timer]) {
-+		/*  Clear interrupt.    */
-+		ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-+
-+		/*  Call user hanler or signal. */
-+		flag = dev_timer->flag;
-+		if (!(timer & 0x01)
-+			|| TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			/* 16-bit timer or timer A of 32-bit timer  */
-+			switch (TIMER_FLAG_MASK_HANDLE(flag)) {
-+			case TIMER_FLAG_CALLBACK_IN_IRQ:
-+			case TIMER_FLAG_CALLBACK_IN_HB:
-+				if (dev_timer->arg1)
-+					(*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
-+				break;
-+			case TIMER_FLAG_SIGNAL:
-+				send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
-+				break;
-+			}
-+		}
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+static inline void lq_enable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	clk_enable(clk);
-+
-+	//ltq_pmu_enable(PMU_GPT);
-+
-+	/*  Set divider as 1, disable write protection for SPEN, enable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x01) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(1) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(0);
-+}
-+
-+static inline void lq_disable_gptu(void)
-+{
-+	struct clk *clk = clk_get_sys("1e100a00.gptu", NULL);
-+	ltq_w32(0x00, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	/*  Set divider as 0, enable write protection for SPEN, disable module. */
-+	*LQ_GPTU_CLC =
-+		GPTU_CLC_SMC_SET(0x00) |
-+		GPTU_CLC_RMC_SET(0x00) |
-+		GPTU_CLC_FSOE_SET(0) |
-+		GPTU_CLC_SBWE_SET(0) |
-+		GPTU_CLC_EDIS_SET(0) |
-+		GPTU_CLC_SPEN_SET(0) |
-+		GPTU_CLC_DISR_SET(1);
-+
-+	clk_enable(clk);
-+}
-+
-+int lq_request_timer(unsigned int timer, unsigned int flag,
-+	unsigned long value, unsigned long arg1, unsigned long arg2)
-+{
-+	int ret = 0;
-+	unsigned int con_reg, irnen_reg;
-+	int n, X;
-+
-+	if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
-+		timer, flag, value);
-+
-+	if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
-+		value &= 0xFFFF;
-+	else
-+		timer &= ~0x01;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	/*
-+	 *  Allocate timer.
-+	 */
-+	if (timer < FIRST_TIMER) {
-+		unsigned int mask;
-+		unsigned int shift;
-+		/* This takes care of TIMER1B which is the only choice for Voice TAPI system */
-+		unsigned int offset = TIMER2A;
-+
-+		/*
-+		 *  Pick up a free timer.
-+		 */
-+		if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+			mask = 1 << offset;
-+			shift = 1;
-+		} else {
-+			mask = 3 << offset;
-+			shift = 2;
-+		}
-+		for (timer = offset;
-+		     timer < offset + timer_dev.number_of_timers;
-+		     timer += shift, mask <<= shift)
-+			if (!(timer_dev.occupation & mask)) {
-+				timer_dev.occupation |= mask;
-+				break;
-+			}
-+		if (timer >= offset + timer_dev.number_of_timers) {
-+			printk("failed![%d]\n", __LINE__);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EINVAL;
-+		} else
-+			ret = timer;
-+	} else {
-+		register unsigned int mask;
-+
-+		/*
-+		 *  Check if the requested timer is free.
-+		 */
-+		mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+		if ((timer_dev.occupation & mask)) {
-+			printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
-+				__LINE__, mask, timer_dev.occupation);
-+			mutex_unlock(&timer_dev.gptu_mutex);
-+			return -EBUSY;
-+		} else {
-+			timer_dev.occupation |= mask;
-+			ret = 0;
-+		}
-+	}
-+
-+	/*
-+	 *  Prepare control register value.
-+	 */
-+	switch (TIMER_FLAG_MASK_EDGE(flag)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
-+			GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |=
-+			TIMER_FLAG_MASK_SRC(flag) ==
-+			TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
-+			GPTU_CON_SRC_EG_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SYNC(flag) ==
-+		TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
-+		GPTU_CON_SYNC_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_INVERT(flag) ==
-+		TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_SIZE(flag) ==
-+		TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
-+		GPTU_CON_EXT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_STOP(flag) ==
-+		TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |=
-+		TIMER_FLAG_MASK_TYPE(flag) ==
-+		TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
-+		GPTU_CON_CNT_SET(1);
-+	con_reg |=
-+		TIMER_FLAG_MASK_DIR(flag) ==
-+		TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	/*
-+	 *  Fill up running data.
-+	 */
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flag;
-+	timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
-+	timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-+
-+	/*
-+	 *  Enable GPTU module.
-+	 */
-+	if (!timer_dev.f_gptu_on) {
-+		lq_enable_gptu();
-+		timer_dev.f_gptu_on = 1;
-+	}
-+
-+	/*
-+	 *  Enable IRQ.
-+	 */
-+	if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
-+			timer_dev.timer[timer - FIRST_TIMER].arg1 =
-+				(unsigned long) find_task_by_vpid((int) arg1);
-+
-+		irnen_reg = 1 << (timer - FIRST_TIMER);
-+
-+		if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
-+		    || (TIMER_FLAG_MASK_HANDLE(flag) ==
-+			TIMER_FLAG_CALLBACK_IN_IRQ
-+			&& timer_dev.timer[timer - FIRST_TIMER].arg1)) {
-+			enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+			timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
-+		}
-+	} else
-+		irnen_reg = 0;
-+
-+	/*
-+	 *  Write config register, reload value and enable interrupt.
-+	 */
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	*LQ_GPTU_RELOAD(n, X) = value;
-+	/* printk("reload value = %d\n", (u32)value); */
-+	*LQ_GPTU_IRNEN |= irnen_reg;
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	printk("successful!\n");
-+	return ret;
-+}
-+EXPORT_SYMBOL(lq_request_timer);
-+
-+int lq_free_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	if (GPTU_CON_EN(n, X))
-+		*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	*LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
-+	*LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-+
-+	if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
-+		disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+		timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
-+	}
-+
-+	timer_dev.occupation &= ~mask;
-+	if (!timer_dev.occupation && timer_dev.f_gptu_on) {
-+		lq_disable_gptu();
-+		timer_dev.f_gptu_on = 0;
-+	}
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_free_timer);
-+
-+int lq_start_timer(unsigned int timer, int is_resume)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) ==
-+	TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_start_timer);
-+
-+int lq_stop_timer(unsigned int timer)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_stop_timer);
-+
-+int lq_reset_counter_flags(u32 timer, u32 flags)
-+{
-+	unsigned int oflag;
-+	unsigned int mask, con_reg;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	switch (TIMER_FLAG_MASK_EDGE(flags)) {
-+	default:
-+	case TIMER_FLAG_NONE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x00);
-+		break;
-+	case TIMER_FLAG_RISE_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x01);
-+		break;
-+	case TIMER_FLAG_FALL_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x02);
-+		break;
-+	case TIMER_FLAG_ANY_EDGE:
-+		con_reg = GPTU_CON_EDGE_SET(0x03);
-+		break;
-+	}
-+	if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
-+	else
-+		con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+	con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
-+	con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+	timer_dev.timer[timer - FIRST_TIMER].flag = flags;
-+	if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
-+		timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*LQ_GPTU_CON(n, X) = con_reg;
-+	smp_wmb();
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_reset_counter_flags);
-+
-+int lq_get_count_value(unsigned int timer, unsigned long *value)
-+{
-+	unsigned int flag;
-+	unsigned int mask;
-+	int n, X;
-+
-+	if (!timer_dev.f_gptu_on)
-+		return -EINVAL;
-+
-+	if (timer < FIRST_TIMER
-+	    || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+		return -EINVAL;
-+
-+	mutex_lock(&timer_dev.gptu_mutex);
-+
-+	flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+	if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+		timer &= ~0x01;
-+
-+	mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+	if (((timer_dev.occupation & mask) ^ mask)) {
-+		mutex_unlock(&timer_dev.gptu_mutex);
-+		return -EINVAL;
-+	}
-+
-+	n = timer >> 1;
-+	X = timer & 0x01;
-+
-+	*value = *LQ_GPTU_COUNT(n, X);
-+
-+
-+	mutex_unlock(&timer_dev.gptu_mutex);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(lq_get_count_value);
-+
-+u32 lq_cal_divider(unsigned long freq)
-+{
-+	u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
-+	u32 clock_divider = 1;
-+	module_freq = fpi * 1000;
-+	do_div(module_freq, clock_divider * freq);
-+	return module_freq;
-+}
-+EXPORT_SYMBOL(lq_cal_divider);
-+
-+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
-+	int is_ext_src, unsigned int handle_flag, unsigned long arg1,
-+	unsigned long arg2)
-+{
-+	unsigned long divider;
-+	unsigned int flag;
-+
-+	divider = lq_cal_divider(freq);
-+	if (divider == 0)
-+		return -EINVAL;
-+	flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
-+		| (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
-+		| (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
-+		| TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
-+		| TIMER_FLAG_MASK_HANDLE(handle_flag);
-+
-+	printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
-+		timer, freq, divider);
-+	return lq_request_timer(timer, flag, divider, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_timer);
-+
-+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
-+	unsigned long arg1, unsigned long arg2)
-+{
-+	printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
-+	return lq_request_timer(timer, flag, reload, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_counter);
-+
-+static long gptu_ioctl(struct file *file, unsigned int cmd,
-+	unsigned long arg)
-+{
-+	int ret;
-+	struct gptu_ioctl_param param;
-+
-+	if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+	copy_from_user(&param, (void *) arg, sizeof(param));
-+
-+	if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
-+	       || GPTU_SET_COUNTER) && param.timer < 2)
-+	     || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+	    && !access_ok(VERIFY_WRITE, arg,
-+			   sizeof(struct gptu_ioctl_param)))
-+		return -EFAULT;
-+
-+	switch (cmd) {
-+	case GPTU_REQUEST_TIMER:
-+		ret = lq_request_timer(param.timer, param.flag, param.value,
-+				     (unsigned long) param.pid,
-+				     (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_FREE_TIMER:
-+		ret = lq_free_timer(param.timer);
-+		break;
-+	case GPTU_START_TIMER:
-+		ret = lq_start_timer(param.timer, param.flag);
-+		break;
-+	case GPTU_STOP_TIMER:
-+		ret = lq_stop_timer(param.timer);
-+		break;
-+	case GPTU_GET_COUNT_VALUE:
-+		ret = lq_get_count_value(param.timer, &param.value);
-+		if (!ret)
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+		break;
-+	case GPTU_CALCULATE_DIVIDER:
-+		param.value = lq_cal_divider(param.value);
-+		if (param.value == 0)
-+			ret = -EINVAL;
-+		else {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      value, &param.value,
-+				      sizeof(param.value));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_TIMER:
-+		ret = lq_set_timer(param.timer, param.value,
-+				 TIMER_FLAG_MASK_STOP(param.flag) !=
-+				 TIMER_FLAG_ONCE ? 1 : 0,
-+				 TIMER_FLAG_MASK_SRC(param.flag) ==
-+				 TIMER_FLAG_EXT_SRC ? 1 : 0,
-+				 TIMER_FLAG_MASK_HANDLE(param.flag) ==
-+				 TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
-+				 TIMER_FLAG_NO_HANDLE,
-+				 (unsigned long) param.pid,
-+				 (unsigned long) param.sig);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	case GPTU_SET_COUNTER:
-+		lq_set_counter(param.timer, param.flag, param.value, 0, 0);
-+		if (ret > 0) {
-+			copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+				      timer, &ret, sizeof(&ret));
-+			ret = 0;
-+		}
-+		break;
-+	default:
-+		ret = -ENOTTY;
-+	}
-+
-+	return ret;
-+}
-+
-+static int gptu_open(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static int gptu_release(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+int __init lq_gptu_init(void)
-+{
-+	int ret;
-+	unsigned int i;
-+
-+	ltq_w32(0, LQ_GPTU_IRNEN);
-+	ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+	memset(&timer_dev, 0, sizeof(timer_dev));
-+	mutex_init(&timer_dev.gptu_mutex);
-+
-+	lq_enable_gptu();
-+	timer_dev.number_of_timers = GPTU_ID_CFG * 2;
-+	lq_disable_gptu();
-+	if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
-+		timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
-+	printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-+
-+	ret = misc_register(&gptu_miscdev);
-+	if (ret) {
-+		printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
-+		return ret;
-+	} else {
-+		printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
-+	}
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
-+		if (ret) {
-+			for (; i >= 0; i--)
-+				free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
-+			misc_deregister(&gptu_miscdev);
-+			printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
-+			return ret;
-+		} else {
-+			timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
-+			disable_irq(timer_dev.timer[i].irq);
-+			printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+void __exit lq_gptu_exit(void)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < timer_dev.number_of_timers; i++) {
-+		if (timer_dev.timer[i].f_irq_on)
-+			disable_irq(timer_dev.timer[i].irq);
-+		free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
-+	}
-+	lq_disable_gptu();
-+	misc_deregister(&gptu_miscdev);
-+}
-+
-+module_init(lq_gptu_init);
-+module_exit(lq_gptu_exit);
-+
-+#endif
diff --git a/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch
deleted file mode 100644
index a725199..0000000
--- a/target/linux/lantiq/patches-3.8/0040-owrt-lantiq-add-atm-hack.patch
+++ /dev/null
@@ -1,499 +0,0 @@
-From ae15f50544e6012c998ef59f6c12e334da3c9bff Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 40/40] owrt: lantiq: add atm hack
-
----
- arch/mips/include/asm/mach-lantiq/lantiq_atm.h |  196 +++++++++++++++++++++++
- arch/mips/include/asm/mach-lantiq/lantiq_ptm.h |  203 ++++++++++++++++++++++++
- arch/mips/lantiq/irq.c                         |    2 +
- arch/mips/mm/cache.c                           |    2 +
- include/uapi/linux/atm.h                       |    6 +
- net/atm/common.c                               |    6 +
- net/atm/proc.c                                 |    2 +-
- 7 files changed, 416 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h
-@@ -0,0 +1,196 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_atm.h
-+** PROJECT      : UEIP
-+** MODULES      : ATM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global ATM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_ATM_H
-+#define IFX_ATM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_ATM UEIP Project - ATM driver module
-+  \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_IOCTL IOCTL Commands
-+  \ingroup IFX_ATM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_ATM_STRUCT Structures
-+  \ingroup IFX_ATM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_atm.h
-+  \ingroup IFX_ATM
-+  \brief ATM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ATM MIB
-+ */
-+
-+/*!
-+  \struct atm_cell_ifEntry_t
-+  \brief Structure used for Cell Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress cells (upper 32 bits, total 64 bits)   */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress cells (lower 32 bits, total 64 bits)   */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress cells (upper 32 bits, total 64 bits)    */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress cells (lower 32 bits, total 64 bits)    */
-+	__u32	ifInErrors;         /*!< counter of error ingress cells     */
-+	__u32	ifInUnknownProtos;  /*!< counter of unknown ingress cells   */
-+	__u32	ifOutErrors;        /*!< counter of error egress cells      */
-+} atm_cell_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_ifEntry_t
-+  \brief Structure used for AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5".
-+ */
-+typedef struct {
-+	__u32	ifHCInOctets_h;     /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */
-+	__u32	ifHCInOctets_l;     /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */
-+	__u32	ifHCOutOctets_h;    /*!< byte counter of egress packets (upper 32 bits, total 64 bits)  */
-+	__u32	ifHCOutOctets_l;    /*!< byte counter of egress packets (lower 32 bits, total 64 bits)  */
-+	__u32	ifInUcastPkts;      /*!< counter of ingress packets         */
-+	__u32	ifOutUcastPkts;     /*!< counter of egress packets          */
-+	__u32	ifInErrors;         /*!< counter of error ingress packets   */
-+	__u32	ifInDiscards;       /*!< counter of dropped ingress packets */
-+	__u32	ifOutErros;         /*!< counter of error egress packets    */
-+	__u32	ifOutDiscards;      /*!< counter of dropped egress packets  */
-+} atm_aal5_ifEntry_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  This structure is a part of structure "atm_aal5_vcc_x_t".
-+ */
-+typedef struct {
-+	__u32	aal5VccCrcErrors;       /*!< counter of ingress packets with CRC error  */
-+	__u32	aal5VccSarTimeOuts;     /*!< counter of ingress packets with Re-assemble timeout    */  //no timer support yet
-+	__u32	aal5VccOverSizedSDUs;   /*!< counter of oversized ingress packets       */
-+} atm_aal5_vcc_t;
-+
-+/*!
-+  \struct atm_aal5_vcc_x_t
-+  \brief Structure used for per PVC AAL5 Frame Level MIB Counters.
-+
-+  User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC".
-+ */
-+typedef struct {
-+	int             vpi;        /*!< VPI of the VCC to get MIB counters */
-+	int             vci;        /*!< VCI of the VCC to get MIB counters */
-+	atm_aal5_vcc_t  mib_vcc;    /*!< structure to get MIB counters      */
-+} atm_aal5_vcc_x_t;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_ATM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief ATM IOCTL Magic Number
-+ */
-+#define PPE_ATM_IOC_MAGIC       'o'
-+/*!
-+  \brief ATM IOCTL Command - Get Cell Level MIB Counters
-+
-+   This command is obsolete. User can get cell level MIB from DSL API.
-+   This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_CELL        _IOW(PPE_ATM_IOC_MAGIC,  0, atm_cell_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get AAL5 Level MIB Counters
-+
-+   Get AAL5 packet counters.
-+   This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_AAL5        _IOW(PPE_ATM_IOC_MAGIC,  1, atm_aal5_ifEntry_t)
-+/*!
-+  \brief ATM IOCTL Command - Get Per PVC MIB Counters
-+
-+   Get AAL5 packet counters for each PVC.
-+   This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters.
-+ */
-+#define PPE_ATM_MIB_VCC         _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
-+/*!
-+  \brief Total Number of ATM IOCTL Commands
-+ */
-+#define PPE_ATM_IOC_MAXNR       3
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_ATM_H
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h
-@@ -0,0 +1,203 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifx_ptm.h
-+** PROJECT      : UEIP
-+** MODULES      : PTM
-+**
-+** DATE         : 17 Jun 2009
-+** AUTHOR       : Xu Liang
-+** DESCRIPTION  : Global PTM driver header file
-+** COPYRIGHT    :       Copyright (c) 2006
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 07 JUL 2009  Xu Liang        Init Version
-+*******************************************************************************/
-+
-+#ifndef IFX_PTM_H
-+#define IFX_PTM_H
-+
-+
-+
-+/*!
-+  \defgroup IFX_PTM UEIP Project - PTM driver module
-+  \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_IOCTL IOCTL Commands
-+  \ingroup IFX_PTM
-+  \brief IOCTL Commands used by user application.
-+ */
-+
-+/*!
-+  \defgroup IFX_PTM_STRUCT Structures
-+  \ingroup IFX_PTM
-+  \brief Structures used by user application.
-+ */
-+
-+/*!
-+  \file ifx_ptm.h
-+  \ingroup IFX_PTM
-+  \brief PTM driver header file
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *              Definition
-+ * ####################################
-+ */
-+
-+
-+
-+/*
-+ * ####################################
-+ *                IOCTL
-+ * ####################################
-+ */
-+
-+/*!
-+  \addtogroup IFX_PTM_IOCTL
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Command
-+ */
-+/*!
-+  \brief PTM IOCTL Command - Get codeword MIB counters.
-+
-+  This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters.
-+ */
-+#define IFX_PTM_MIB_CW_GET              SIOCDEVPRIVATE + 1
-+/*!
-+  \brief PTM IOCTL Command - Get packet MIB counters.
-+
-+  This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters.
-+ */
-+#define IFX_PTM_MIB_FRAME_GET           SIOCDEVPRIVATE + 2
-+/*!
-+  \brief PTM IOCTL Command - Get firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_GET                 SIOCDEVPRIVATE + 3
-+/*!
-+  \brief PTM IOCTL Command - Set firmware configuration (CRC).
-+
-+  This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC).
-+ */
-+#define IFX_PTM_CFG_SET                 SIOCDEVPRIVATE + 4
-+/*!
-+  \brief PTM IOCTL Command - Program priority value to TX queue mapping.
-+
-+  This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping.
-+ */
-+#define IFX_PTM_MAP_PKT_PRIO_TO_Q       SIOCDEVPRIVATE + 14
-+
-+/*@}*/
-+
-+
-+/*!
-+  \addtogroup IFX_PTM_STRUCT
-+ */
-+/*@{*/
-+
-+/*
-+ *  ioctl Data Type
-+ */
-+
-+/*!
-+  \typedef PTM_CW_IF_ENTRY_T
-+  \brief Wrapping of structure "ptm_cw_ifEntry_t".
-+ */
-+/*!
-+  \struct ptm_cw_ifEntry_t
-+  \brief Structure used for CodeWord level MIB counters.
-+ */
-+typedef struct ptm_cw_ifEntry_t {
-+    uint32_t    ifRxNoIdleCodewords;    /*!< output, number of ingress user codeword */
-+    uint32_t    ifRxIdleCodewords;      /*!< output, number of ingress idle codeword */
-+    uint32_t    ifRxCodingViolation;    /*!< output, number of error ingress codeword */
-+    uint32_t    ifTxNoIdleCodewords;    /*!< output, number of egress user codeword */
-+    uint32_t    ifTxIdleCodewords;      /*!< output, number of egress idle codeword */
-+} PTM_CW_IF_ENTRY_T;
-+
-+/*!
-+  \typedef PTM_FRAME_MIB_T
-+  \brief Wrapping of structure "ptm_frame_mib_t".
-+ */
-+/*!
-+  \struct ptm_frame_mib_t
-+  \brief Structure used for packet level MIB counters.
-+ */
-+typedef struct ptm_frame_mib_t {
-+    uint32_t    RxCorrect;      /*!< output, number of ingress packet */
-+    uint32_t    TC_CrcError;    /*!< output, number of egress packet with CRC error */
-+    uint32_t    RxDropped;      /*!< output, number of dropped ingress packet */
-+    uint32_t    TxSend;         /*!< output, number of egress packet */
-+} PTM_FRAME_MIB_T;
-+
-+/*!
-+  \typedef IFX_PTM_CFG_T
-+  \brief Wrapping of structure "ptm_cfg_t".
-+ */
-+/*!
-+  \struct ptm_cfg_t
-+  \brief Structure used for ETH/TC CRC configuration.
-+ */
-+typedef struct ptm_cfg_t {
-+    uint32_t    RxEthCrcPresent;    /*!< input/output, ingress packet has ETH CRC */
-+    uint32_t    RxEthCrcCheck;      /*!< input/output, check ETH CRC of ingress packet */
-+    uint32_t    RxTcCrcCheck;       /*!< input/output, check TC CRC of ingress codeword */
-+    uint32_t    RxTcCrcLen;         /*!< input/output, length of TC CRC of ingress codeword */
-+    uint32_t    TxEthCrcGen;        /*!< input/output, generate ETH CRC for egress packet */
-+    uint32_t    TxTcCrcGen;         /*!< input/output, generate TC CRC for egress codeword */
-+    uint32_t    TxTcCrcLen;         /*!< input/output, length of TC CRC of egress codeword */
-+} IFX_PTM_CFG_T;
-+
-+/*!
-+  \typedef IFX_PTM_PRIO_Q_MAP_T
-+  \brief Wrapping of structure "ppe_prio_q_map".
-+ */
-+/*!
-+  \struct ppe_prio_q_map
-+  \brief Structure used for Priority Value to TX Queue mapping.
-+ */
-+typedef struct ppe_prio_q_map {
-+    int             pkt_prio;
-+    int             qid;
-+    int             vpi;    //  ignored in eth interface
-+    int             vci;    //  ignored in eth interface
-+} IFX_PTM_PRIO_Q_MAP_T;
-+
-+/*@}*/
-+
-+
-+
-+/*
-+ * ####################################
-+ *                 API
-+ * ####################################
-+ */
-+
-+#ifdef __KERNEL__
-+struct port_cell_info {
-+    unsigned int    port_num;
-+    unsigned int    tx_link_rate[2];
-+};
-+#endif
-+
-+
-+
-+#endif  //  IFX_PTM_H
-+
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -14,6 +14,7 @@
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
- #include <linux/of_irq.h>
-+#include <linux/module.h>
- 
- #include <asm/bootinfo.h>
- #include <asm/irq_cpu.h>
-@@ -99,6 +100,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
- 	ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
- 	ltq_icu_w32(im, BIT(offset), isr);
- }
-+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
- 
- static void ltq_ack_irq(struct irq_data *d)
- {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- 
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
- 
- #endif /* CONFIG_DMA_NONCOHERENT */
- 
---- a/include/uapi/linux/atm.h
-+++ b/include/uapi/linux/atm.h
-@@ -130,8 +130,14 @@
- #define ATM_ABR		4
- #define ATM_ANYCLASS	5		/* compatible with everything */
- 
-+#define ATM_VBR_NRT     ATM_VBR
-+#define ATM_VBR_RT      6
-+#define ATM_UBR_PLUS    7
-+#define ATM_GFR         8
-+
- #define ATM_MAX_PCR	-1		/* maximum available PCR */
- 
-+
- struct atm_trafprm {
- 	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
- 	int		max_pcr;	/* maximum PCR in cells per second */
---- a/net/atm/common.c
-+++ b/net/atm/common.c
-@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc
- 	write_unlock_irq(&vcc_sklist_lock);
- }
- 
-+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL;
-+EXPORT_SYMBOL(ifx_atm_alloc_tx);
-+
- static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size)
- {
- 	struct sk_buff *skb;
- 	struct sock *sk = sk_atm(vcc);
- 
-+	if (ifx_atm_alloc_tx != NULL)
-+		return ifx_atm_alloc_tx(vcc, size);
-+
- 	if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
- 		pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
- 			 sk_wmem_alloc_get(sk), size, sk->sk_sndbuf);
---- a/net/atm/proc.c
-+++ b/net/atm/proc.c
-@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil
- static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
- {
- 	static const char *const class_name[] = {
--		"off", "UBR", "CBR", "VBR", "ABR"};
-+		"off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"};
- 	static const char *const aal_name[] = {
- 		"---",	"1",	"2",	"3/4",	/*  0- 3 */
- 		"???",	"5",	"???",	"???",	/*  4- 7 */
diff --git a/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch b/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch
deleted file mode 100644
index ceaf366..0000000
--- a/target/linux/lantiq/patches-3.8/0041-owrt-mtd-split.patch
+++ /dev/null
@@ -1,248 +0,0 @@
-From 2a295753a10823a47542c779a25bbb1f52c71281 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:13 +0200
-Subject: [PATCH 19/25] owrt mtd split
-
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    1 +
- arch/mips/lantiq/setup.c                           |    7 +
- drivers/mtd/Kconfig                                |    4 +
- drivers/mtd/mtdpart.c                              |  173 +++++++++++++++++++-
- 4 files changed, 184 insertions(+), 1 deletions(-)
-
-Index: linux-3.8.13/drivers/mtd/Kconfig
-===================================================================
---- linux-3.8.13.orig/drivers/mtd/Kconfig	2013-08-04 19:55:18.499988719 +0200
-+++ linux-3.8.13/drivers/mtd/Kconfig	2013-08-04 19:55:22.599988819 +0200
-@@ -31,6 +31,10 @@
- 	bool "Automatically split 'rootfs' partition for squashfs"
- 	default y
- 
-+config MTD_UIMAGE_SPLIT
-+	bool "Automatically split 'linux' partition into 'kernel' and 'rootfs'"
-+	default y
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
-Index: linux-3.8.13/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.8.13.orig/drivers/mtd/mtdpart.c	2013-08-04 19:55:18.791988726 +0200
-+++ linux-3.8.13/drivers/mtd/mtdpart.c	2013-08-06 13:39:13.212319144 +0200
-@@ -833,6 +833,191 @@
- }
- #endif /* CONFIG_MTD_ROOTFS_SPLIT */
- 
-+#ifdef CONFIG_MTD_UIMAGE_SPLIT
-+static unsigned long find_uimage_size(struct mtd_info *mtd,
-+				      unsigned long offset)
-+{
-+#define UBOOT_MAGIC	0x56190527
-+	unsigned long magic = 0;
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return 0;
-+
-+	if (le32_to_cpu(magic) != UBOOT_MAGIC)
-+		return 0;
-+
-+	ret = mtd_read(mtd, offset + 12, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	return temp + 0x40;
-+}
-+
-+static unsigned long find_tplink_size(struct mtd_info *mtd,
-+				      unsigned long offset)
-+{
-+#define TPLINK_MAGIC	0x00000002
-+	unsigned long magic = 0;
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return 0;
-+
-+	if (le32_to_cpu(magic) != TPLINK_MAGIC)
-+		return 0;
-+
-+	ret = mtd_read(mtd, offset + 0x78, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	return temp + 0x200;
-+}
-+
-+static unsigned long find_eva_size(struct mtd_info *mtd,
-+				      unsigned long offset)
-+{
-+#define EVA_MAGIC	0xfeed1281
-+	unsigned long magic = 0;
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return 0;
-+
-+	if (le32_to_cpu(magic) != EVA_MAGIC)
-+		return 0;
-+
-+	ret = mtd_read(mtd, offset + 4, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	/* add eva header size */
-+	temp = le32_to_cpu(temp) + 0x18;
-+
-+	temp &= ~0xffff;
-+	temp += 0x10000;
-+	return temp;
-+}
-+
-+static int detect_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
-+{
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+
-+	return le32_to_cpu(temp) == SQUASHFS_MAGIC;
-+}
-+
-+static int detect_eva_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
-+{
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	return be32_to_cpu(temp) == SQUASHFS_MAGIC;
-+}
-+
-+static unsigned long find_brnimage_size(struct mtd_info *mtd,
-+					unsigned long offset)
-+{
-+	unsigned long buf[4];
-+	// Assume at most 2MB of kernel image
-+	unsigned long end = offset + (2 << 20);
-+	unsigned long ptr = offset + 0x400 - 12;
-+	size_t len;
-+	int ret;
-+
-+	while (ptr < end) {
-+		long size_min = ptr - 0x400 - 12 - offset;
-+		long size_max = ptr + 12 - offset;
-+		ret = mtd_read(mtd, ptr, 16, &len, (void *)buf);
-+		if (ret || len != 16)
-+			return 0;
-+
-+		if (le32_to_cpu(buf[0]) < size_min ||
-+		    le32_to_cpu(buf[0]) > size_max) {
-+			ptr += 0x400;
-+			continue;
-+		}
-+
-+		if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC)
-+			return ptr + 12 - offset;
-+
-+		ptr += 0x400;
-+	}
-+
-+	return 0;
-+}
-+
-+static int split_uimage(struct mtd_info *mtd,
-+			const struct mtd_partition *part)
-+{
-+	static struct mtd_partition split_partitions[] = {
-+		{
-+			.name = "kernel",
-+			.offset = 0x0,
-+			.size = 0x0,
-+		}, {
-+			.name = "rootfs",
-+			.offset = 0x0,
-+			.size = 0x0,
-+		},
-+	};
-+
-+	split_partitions[0].size = find_uimage_size(mtd, part->offset);
-+	if (!split_partitions[0].size)
-+		split_partitions[0].size = find_eva_size(mtd, part->offset);
-+	if (!split_partitions[0].size)
-+		split_partitions[0].size = find_brnimage_size(mtd, part->offset);
-+	if (!split_partitions[0].size)
-+		split_partitions[0].size = find_tplink_size(mtd, part->offset);
-+	if (!split_partitions[0].size) {
-+		printk(KERN_NOTICE "no uImage or brnImage or eva found in linux partition\n");
-+		return -1;
-+	}
-+
-+	if (detect_eva_squashfs_partition(mtd,
-+				       part->offset
-+				       + split_partitions[0].size)) {
-+		split_partitions[0].size += 0x100;
-+		pr_info("found eva dummy squashfs behind kernel\n");
-+	} else if (!detect_squashfs_partition(mtd,
-+				       part->offset
-+				       + split_partitions[0].size)) {
-+		split_partitions[0].size &= ~(mtd->erasesize - 1);
-+		split_partitions[0].size += mtd->erasesize;
-+	} else {
-+		pr_info("found squashfs behind kernel\n");
-+	}
-+
-+	split_partitions[0].offset = part->offset;
-+	split_partitions[1].offset = part->offset + split_partitions[0].size;
-+	split_partitions[1].size = part->size - split_partitions[0].size;
-+
-+	add_mtd_partitions(mtd, split_partitions, 2);
-+
-+	return 0;
-+}
-+#endif
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -849,7 +1034,7 @@
- 	struct mtd_part *slave;
- 	uint64_t cur_offset = 0;
- 	int i;
--#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT)
- 	int ret;
- #endif
- 
-@@ -866,6 +1051,15 @@
- 
- 		add_mtd_device(&slave->mtd);
- 
-+#ifdef CONFIG_MTD_UIMAGE_SPLIT
-+		if (!strcmp(parts[i].name, "linux")) {
-+			ret = split_uimage(master, &parts[i]);
-+
-+			if (ret)
-+				printk(KERN_WARNING "Can't split linux partition\n");
-+		}
-+#endif
-+
- 		if (!strcmp(parts[i].name, "rootfs")) {
- #ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
- 			if (ROOT_DEV == 0) {
diff --git a/target/linux/lantiq/patches-3.8/0042-PINCTRL-lantiq-fix-pinmux.patch b/target/linux/lantiq/patches-3.8/0042-PINCTRL-lantiq-fix-pinmux.patch
deleted file mode 100644
index 0995e20..0000000
--- a/target/linux/lantiq/patches-3.8/0042-PINCTRL-lantiq-fix-pinmux.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/drivers/pinctrl/pinctrl-xway.c
-+++ b/drivers/pinctrl/pinctrl-xway.c
-@@ -563,10 +563,9 @@ static struct pinctrl_desc xway_pctrl_de
- 	.confops	= &xway_pinconf_ops,
- };
- 
--static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+static int mux_apply(struct ltq_pinmux_info *info,
- 				int pin, int mux)
- {
--	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
- 	int port = PORT(pin);
- 	u32 alt1_reg = GPIO_ALT1(pin);
- 
-@@ -586,6 +585,14 @@ static inline int xway_mux_apply(struct
- 	return 0;
- }
- 
-+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
-+				int pin, int mux)
-+{
-+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
-+
-+	return mux_apply(info, pin, mux);
-+}
-+
- static const struct ltq_cfg_param xway_cfg_params[] = {
- 	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
- 	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
-@@ -630,6 +637,10 @@ static int xway_gpio_dir_out(struct gpio
- {
- 	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
- 
-+	if (PORT(pin) == PORT3)
-+		gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
-+	else
-+		gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
- 	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
- 	xway_gpio_set(chip, pin, val);
- 
-@@ -650,6 +661,18 @@ static void xway_gpio_free(struct gpio_c
- 	pinctrl_free_gpio(gpio);
- }
- 
-+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+	struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
-+	int i;
-+
-+	for (i = 0; i < info->num_exin; i++)
-+		if (info->exin[i] == offset)
-+			return ltq_eiu_get_irq(i);
-+
-+	return -1;
-+}
-+
- static struct gpio_chip xway_chip = {
- 	.label = "gpio-xway",
- 	.direction_input = xway_gpio_dir_in,
-@@ -658,6 +681,7 @@ static struct gpio_chip xway_chip = {
- 	.set = xway_gpio_set,
- 	.request = xway_gpio_req,
- 	.free = xway_gpio_free,
-+	.to_irq = xway_gpio_to_irq,
- 	.base = -1,
- };
- 
diff --git a/target/linux/lantiq/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch b/target/linux/lantiq/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch
deleted file mode 100644
index 21d9ee0..0000000
--- a/target/linux/lantiq/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 0184f7b64c68fe9606559e86bdd288de01c87a85 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 17 Mar 2013 10:30:48 +0100
-Subject: [PATCH 200/208] MIPS: read the mips_machine name from OF and output
- it in /proc/cpuinfo
-
-This allows the userland to be compatible to the devive probing of mips_machine.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/prom.h |    3 +++
- arch/mips/kernel/proc.c      |    6 +++++-
- arch/mips/kernel/prom.c      |   24 ++++++++++++++++++++++++
- 3 files changed, 32 insertions(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/prom.h
-+++ b/arch/mips/include/asm/prom.h
-@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_
- 	__dt_setup_arch(&__dtb_##sym##_begin);				\
- })
- 
-+extern char *of_mips_get_machine_name(void);
-+
- #else /* CONFIG_OF */
- static inline void device_tree_init(void) { }
-+static char *of_mips_get_machine_name(void) { return NULL; }
- #endif /* CONFIG_OF */
- 
- #endif /* __ASM_PROM_H */
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -12,6 +12,7 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsregs.h>
- #include <asm/processor.h>
-+#include <asm/prom.h>
- #include <asm/mips_machine.h>
- 
- unsigned int vced_count, vcei_count;
-@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file
- 	 */
- 	if (n == 0) {
- 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
--		if (mips_get_machine_name())
-+		if (of_mips_get_machine_name())
-+			seq_printf(m, "machine\t\t\t: %s\n",
-+				   of_mips_get_machine_name());
-+		else if (mips_get_machine_name())
- 			seq_printf(m, "machine\t\t\t: %s\n",
- 				   mips_get_machine_name());
- 	}
---- a/arch/mips/kernel/prom.c
-+++ b/arch/mips/kernel/prom.c
-@@ -23,6 +23,13 @@
- #include <asm/page.h>
- #include <asm/prom.h>
- 
-+static char of_mips_machine_name[64] = "Unknown";
-+
-+char *of_mips_get_machine_name(void)
-+{
-+	return of_mips_machine_name;
-+}
-+
- int __init early_init_dt_scan_memory_arch(unsigned long node,
- 					  const char *uname, int depth,
- 					  void *data)
-@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_a
- }
- #endif
- 
-+int __init early_init_dt_scan_model(unsigned long node,
-+	const char *uname, int depth,
-+	void *data)
-+{
-+	if (!depth) {
-+		char *model = of_get_flat_dt_prop(node, "model", NULL);
-+		if (model) {
-+			snprintf(of_mips_machine_name, sizeof(of_mips_machine_name), model);
-+			pr_info("MIPS: machine is %s\n", of_mips_machine_name);
-+		}
-+	}
-+	return 0;
-+}
-+
- void __init early_init_devtree(void *params)
- {
- 	/* Setup flat device-tree pointer */
-@@ -65,6 +86,9 @@ void __init early_init_devtree(void *par
- 	/* Scan memory nodes */
- 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
- 	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
-+
-+	/* try to load the mips machine name */
-+	of_scan_flat_dt(early_init_dt_scan_model, NULL);
- }
- 
- void __init __dt_setup_arch(struct boot_param_header *bph)
diff --git a/target/linux/lantiq/patches-3.9/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.9/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
deleted file mode 100644
index f1ba885..0000000
--- a/target/linux/lantiq/patches-3.9/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0a27a5e5917d8d5e179763788c204d12895c278b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 29 Jan 2013 21:11:55 +0100
-Subject: [PATCH 01/22] MTD: m25p80: allow loading mtd name from OF
-
-In accordance with the physmap flash we should honour the linux,mtd-name
-property when deciding what name the mtd device has.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/devices/m25p80.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -922,10 +922,13 @@ static int m25p_probe(struct spi_device
- 	unsigned			i;
- 	struct mtd_part_parser_data	ppdata;
- 	struct device_node __maybe_unused *np = spi->dev.of_node;
-+	const char __maybe_unused	*of_mtd_name = NULL;
- 
- #ifdef CONFIG_MTD_OF_PARTS
- 	if (!of_device_is_available(np))
- 		return -ENODEV;
-+	of_property_read_string(spi->dev.of_node,
-+					"linux,mtd-name", &of_mtd_name);
- #endif
- 
- 	/* Platform data helps sort out which chip type we have, as
-@@ -1001,6 +1004,8 @@ static int m25p_probe(struct spi_device
- 
- 	if (data && data->name)
- 		flash->mtd.name = data->name;
-+	else if (of_mtd_name)
-+		flash->mtd.name = of_mtd_name;
- 	else
- 		flash->mtd.name = dev_name(&spi->dev);
- 
diff --git a/target/linux/lantiq/patches-3.9/0002-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch b/target/linux/lantiq/patches-3.9/0002-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
deleted file mode 100644
index 102e2d9..0000000
--- a/target/linux/lantiq/patches-3.9/0002-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From e9e520f4f10fdd673e5083bdc082515425ed7457 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 11:59:23 +0100
-Subject: [PATCH 02/22] MIPS: lantiq: adds 4dword burst length for dma
-
----
- arch/mips/lantiq/xway/dma.c |    4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -48,6 +48,7 @@
- #define DMA_IRQ_ACK		0x7e		/* IRQ status register */
- #define DMA_POLL		BIT(31)		/* turn on channel polling */
- #define DMA_CLK_DIV4		BIT(6)		/* polling clock divider */
-+#define DMA_4W_BURST		BIT(2)		/* 4 word burst length */
- #define DMA_2W_BURST		BIT(1)		/* 2 word burst length */
- #define DMA_MAX_CHANNEL		20		/* the soc has 20 channels */
- #define DMA_ETOP_ENDIANNESS	(0xf << 8) /* endianness swap etop channels */
-@@ -196,7 +197,8 @@ ltq_dma_init_port(int p)
- 		 * Tell the DMA engine to swap the endianness of data frames and
- 		 * drop packets if the channel arbitration fails.
- 		 */
--		ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
-+		ltq_dma_w32_mask(0, (DMA_4W_BURST << 4) | (DMA_4W_BURST << 2) |
-+			DMA_ETOP_ENDIANNESS | DMA_PDEN,
- 			LTQ_DMA_PCTRL);
- 		break;
- 
diff --git a/target/linux/lantiq/patches-3.9/0003-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch b/target/linux/lantiq/patches-3.9/0003-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch
deleted file mode 100644
index 82f20b7..0000000
--- a/target/linux/lantiq/patches-3.9/0003-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From 0c11f1ffaa2015a791e925741b0cdb38a2ef7e97 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 23 Jun 2012 15:32:33 +0200
-Subject: [PATCH 03/22] GPIO: MIPS: add gpio driver for falcon SoC
-
-Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
-up to 32 pads. The GPIO blocks have a per pin IRQs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Cc: linux-kernel@vger.kernel.org
----
- drivers/gpio/Kconfig       |    5 +
- drivers/gpio/Makefile      |    1 +
- drivers/gpio/gpio-falcon.c |  349 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 355 insertions(+)
- create mode 100644 drivers/gpio/gpio-falcon.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -136,6 +136,11 @@ config GPIO_EP93XX
- 	depends on ARCH_EP93XX
- 	select GPIO_GENERIC
- 
-+config GPIO_FALCON
-+	def_bool y
-+	depends on MIPS && SOC_FALCON
-+	select GPIO_GENERIC
-+
- config GPIO_MM_LANTIQ
- 	bool "Lantiq Memory mapped GPIOs"
- 	depends on LANTIQ && SOC_XWAY
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055
- obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
- obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
- obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
-+obj-$(CONFIG_GPIO_FALCON)	+= gpio-falcon.o
- obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
- obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
- obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
---- /dev/null
-+++ b/drivers/gpio/gpio-falcon.c
-@@ -0,0 +1,349 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/gpio.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/export.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* Data Output Register */
-+#define GPIO_OUT            0x00000000
-+/* Data Input Register */
-+#define GPIO_IN             0x00000004
-+/* Direction Register */
-+#define GPIO_DIR            0x00000008
-+/* External Interrupt Control Register 0 */
-+#define GPIO_EXINTCR0       0x00000018
-+/* External Interrupt Control Register 1 */
-+#define GPIO_EXINTCR1       0x0000001C
-+/* IRN Capture Register */
-+#define GPIO_IRNCR          0x00000020
-+/* IRN Interrupt Configuration Register */
-+#define GPIO_IRNCFG		0x0000002C
-+/* IRN Interrupt Enable Set Register */
-+#define GPIO_IRNRNSET       0x00000030
-+/* IRN Interrupt Enable Clear Register */
-+#define GPIO_IRNENCLR       0x00000034
-+/* Output Set Register */
-+#define GPIO_OUTSET         0x00000040
-+/* Output Cler Register */
-+#define GPIO_OUTCLR         0x00000044
-+/* Direction Clear Register */
-+#define GPIO_DIRSET         0x00000048
-+/* Direction Set Register */
-+#define GPIO_DIRCLR         0x0000004C
-+
-+/* turn a gpio_chip into a falcon_gpio_port */
-+#define ctop(c)		container_of(c, struct falcon_gpio_port, gpio_chip)
-+/* turn a irq_data into a falcon_gpio_port */
-+#define itop(i)		((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
-+
-+#define port_r32(p, reg)	ltq_r32(p->port + reg)
-+#define port_w32(p, val, reg)	ltq_w32(val, p->port + reg)
-+#define port_w32_mask(p, clear, set, reg) \
-+		port_w32(p, (port_r32(p, reg) & ~(clear)) | (set), reg)
-+
-+#define MAX_PORTS		5
-+#define PINS_PER_PORT		32
-+
-+struct falcon_gpio_port {
-+	struct gpio_chip gpio_chip;
-+	void __iomem *port;
-+	unsigned int irq_base;
-+	unsigned int chained_irq;
-+	struct clk *clk;
-+	char name[6];
-+};
-+
-+static int falcon_gpio_direction_input(struct gpio_chip *chip,
-+					unsigned int offset)
-+{
-+	port_w32(ctop(chip), 1 << offset, GPIO_DIRCLR);
-+
-+	return 0;
-+}
-+
-+static void falcon_gpio_set(struct gpio_chip *chip, unsigned int offset,
-+					int value)
-+{
-+	if (value)
-+		port_w32(ctop(chip), 1 << offset, GPIO_OUTSET);
-+	else
-+		port_w32(ctop(chip), 1 << offset, GPIO_OUTCLR);
-+}
-+
-+static int falcon_gpio_direction_output(struct gpio_chip *chip,
-+					unsigned int offset, int value)
-+{
-+	falcon_gpio_set(chip, offset, value);
-+	port_w32(ctop(chip), 1 << offset, GPIO_DIRSET);
-+
-+	return 0;
-+}
-+
-+static int falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
-+{
-+	if ((port_r32(ctop(chip), GPIO_DIR) >> offset) & 1)
-+		return (port_r32(ctop(chip), GPIO_OUT) >> offset) & 1;
-+	else
-+		return (port_r32(ctop(chip), GPIO_IN) >> offset) & 1;
-+}
-+
-+static int falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
-+{
-+	int gpio = chip->base + offset;
-+
-+	return pinctrl_request_gpio(gpio);
-+}
-+
-+static void falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
-+{
-+	int gpio = chip->base + offset;
-+
-+	pinctrl_free_gpio(gpio);
-+}
-+
-+static int falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-+{
-+	return ctop(chip)->irq_base + offset;
-+}
-+
-+static void falcon_gpio_disable_irq(struct irq_data *d)
-+{
-+	unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+	port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
-+}
-+
-+static void falcon_gpio_enable_irq(struct irq_data *d)
-+{
-+	unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+	port_w32(itop(d), 1 << offset, GPIO_IRNRNSET);
-+}
-+
-+static void falcon_gpio_ack_irq(struct irq_data *d)
-+{
-+	unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+	port_w32(itop(d), 1 << offset, GPIO_IRNCR);
-+}
-+
-+static void falcon_gpio_mask_and_ack_irq(struct irq_data *d)
-+{
-+	unsigned int offset = d->irq - itop(d)->irq_base;
-+
-+	port_w32(itop(d), 1 << offset, GPIO_IRNENCLR);
-+	port_w32(itop(d), 1 << offset, GPIO_IRNCR);
-+}
-+
-+static struct irq_chip falcon_gpio_irq_chip;
-+static int falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+	unsigned int offset = d->irq - itop(d)->irq_base;
-+	unsigned int mask = 1 << offset;
-+
-+	if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
-+		return 0;
-+
-+	if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
-+		/* level triggered */
-+		port_w32_mask(itop(d), 0, mask, GPIO_IRNCFG);
-+		irq_set_chip_and_handler_name(d->irq,
-+			&falcon_gpio_irq_chip, handle_level_irq, "mux");
-+	} else {
-+		/* edge triggered */
-+		port_w32_mask(itop(d), mask, 0, GPIO_IRNCFG);
-+		irq_set_chip_and_handler_name(d->irq,
-+			&falcon_gpio_irq_chip, handle_simple_irq, "mux");
-+	}
-+
-+	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
-+		port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
-+		port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR1);
-+	} else {
-+		if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
-+			/* positive logic: rising edge, high level */
-+			port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR0);
-+		else
-+			/* negative logic: falling edge, low level */
-+			port_w32_mask(itop(d), 0, mask, GPIO_EXINTCR0);
-+		port_w32_mask(itop(d), mask, 0, GPIO_EXINTCR1);
-+	}
-+
-+	return gpio_direction_input(itop(d)->gpio_chip.base + offset);
-+}
-+
-+static void falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+	struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
-+	unsigned long irncr;
-+	int offset;
-+
-+	/* acknowledge interrupt */
-+	irncr = port_r32(gpio_port, GPIO_IRNCR);
-+	port_w32(gpio_port, irncr, GPIO_IRNCR);
-+
-+	desc->irq_data.chip->irq_ack(&desc->irq_data);
-+
-+	for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
-+		generic_handle_irq(gpio_port->irq_base + offset);
-+}
-+
-+static int falcon_gpio_irq_map(struct irq_domain *d, unsigned int irq,
-+				irq_hw_number_t hw)
-+{
-+	struct falcon_gpio_port *port = d->host_data;
-+
-+	irq_set_chip_and_handler_name(irq, &falcon_gpio_irq_chip,
-+			handle_simple_irq, "mux");
-+	irq_set_chip_data(irq, port);
-+
-+	/* set to negative logic (falling edge, low level) */
-+	port_w32_mask(port, 0, 1 << hw, GPIO_EXINTCR0);
-+	return 0;
-+}
-+
-+static struct irq_chip falcon_gpio_irq_chip = {
-+	.name = "gpio_irq_mux",
-+	.irq_mask = falcon_gpio_disable_irq,
-+	.irq_unmask = falcon_gpio_enable_irq,
-+	.irq_ack = falcon_gpio_ack_irq,
-+	.irq_mask_ack = falcon_gpio_mask_and_ack_irq,
-+	.irq_set_type = falcon_gpio_irq_type,
-+};
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+	.xlate = irq_domain_xlate_onetwocell,
-+	.map = falcon_gpio_irq_map,
-+};
-+
-+static struct irqaction gpio_cascade = {
-+	.handler = no_action,
-+	.flags = IRQF_DISABLED,
-+	.name = "gpio_cascade",
-+};
-+
-+static int falcon_gpio_probe(struct platform_device *pdev)
-+{
-+	struct pinctrl_gpio_range *gpio_range;
-+	struct device_node *node = pdev->dev.of_node;
-+	const __be32 *bank = of_get_property(node, "lantiq,bank", NULL);
-+	struct falcon_gpio_port *gpio_port;
-+	struct resource *gpiores, irqres;
-+	int ret, size;
-+
-+	if (!bank || *bank >= MAX_PORTS)
-+		return -ENODEV;
-+
-+	size = pinctrl_falcon_get_range_size(*bank);
-+	if (size < 1) {
-+		dev_err(&pdev->dev, "pad not loaded for bank %d\n", *bank);
-+		return size;
-+	}
-+
-+	gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!gpiores)
-+		return -ENODEV;
-+
-+	gpio_range = devm_kzalloc(&pdev->dev, sizeof(struct pinctrl_gpio_range),
-+				GFP_KERNEL);
-+	if (!gpio_range)
-+		return -ENOMEM;
-+
-+	gpio_port = devm_kzalloc(&pdev->dev, sizeof(struct falcon_gpio_port),
-+				GFP_KERNEL);
-+	if (!gpio_port)
-+		return -ENOMEM;
-+	snprintf(gpio_port->name, 6, "gpio%d", *bank);
-+	gpio_port->gpio_chip.label = gpio_port->name;
-+	gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
-+	gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
-+	gpio_port->gpio_chip.get = falcon_gpio_get;
-+	gpio_port->gpio_chip.set = falcon_gpio_set;
-+	gpio_port->gpio_chip.request = falcon_gpio_request;
-+	gpio_port->gpio_chip.free = falcon_gpio_free;
-+	gpio_port->gpio_chip.base = -1;
-+	gpio_port->gpio_chip.ngpio = size;
-+	gpio_port->gpio_chip.dev = &pdev->dev;
-+
-+	gpio_port->port = devm_request_and_ioremap(&pdev->dev, gpiores);
-+	if (!gpio_port->port) {
-+		dev_err(&pdev->dev, "Could not map io ranges\n");
-+		return -ENOMEM;
-+	}
-+
-+	gpio_port->clk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(gpio_port->clk)) {
-+		dev_err(&pdev->dev, "Could not get clock\n");
-+		return PTR_ERR(gpio_port->clk);
-+	}
-+	clk_enable(gpio_port->clk);
-+
-+	if (of_irq_to_resource_table(node, &irqres, 1) == 1) {
-+		gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * *bank);
-+		gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
-+		gpio_port->chained_irq = irqres.start;
-+		irq_domain_add_legacy(node, size, gpio_port->irq_base, 0,
-+					&irq_domain_ops, gpio_port);
-+		setup_irq(irqres.start, &gpio_cascade);
-+		irq_set_handler_data(irqres.start, gpio_port);
-+		irq_set_chained_handler(irqres.start, falcon_gpio_irq_handler);
-+	}
-+
-+	ret = gpiochip_add(&gpio_port->gpio_chip);
-+	if (!ret)
-+		platform_set_drvdata(pdev, gpio_port);
-+
-+	gpio_range->name = "FALCON GPIO";
-+	gpio_range->id = *bank;
-+	gpio_range->base = gpio_port->gpio_chip.base;
-+	gpio_range->npins = gpio_port->gpio_chip.ngpio;
-+	gpio_range->gc = &gpio_port->gpio_chip;
-+	pinctrl_falcon_add_gpio_range(gpio_range);
-+
-+	return ret;
-+}
-+
-+static const struct of_device_id falcon_gpio_match[] = {
-+	{ .compatible = "lantiq,gpio-falcon" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, falcon_gpio_match);
-+
-+static struct platform_driver falcon_gpio_driver = {
-+	.probe = falcon_gpio_probe,
-+	.driver = {
-+		.name = "gpio-falcon",
-+		.owner = THIS_MODULE,
-+		.of_match_table = falcon_gpio_match,
-+	},
-+};
-+
-+int __init falcon_gpio_init(void)
-+{
-+	int ret;
-+
-+	pr_info("FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh\n");
-+	ret = platform_driver_register(&falcon_gpio_driver);
-+	if (ret)
-+		pr_err("falcon_gpio: Error registering platform driver!");
-+	return ret;
-+}
-+
-+subsys_initcall(falcon_gpio_init);
diff --git a/target/linux/lantiq/patches-3.9/0005-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.9/0005-USB-fix-roothub-for-IFXHCD.patch
deleted file mode 100644
index 1bc361d..0000000
--- a/target/linux/lantiq/patches-3.9/0005-USB-fix-roothub-for-IFXHCD.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 36474b3c976055f9f96df76286a5da4812354259 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 05/22] USB: fix roothub for IFXHCD
-
----
- arch/mips/lantiq/Kconfig |    1 +
- drivers/usb/core/hub.c   |    2 +-
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -3,6 +3,7 @@ if LANTIQ
- config SOC_TYPE_XWAY
- 	bool
- 	select PINCTRL_XWAY
-+	select USB_ARCH_HAS_HCD
- 	default n
- 
- choice
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -4016,7 +4016,7 @@ hub_port_init (struct usb_hub *hub, stru
- 		udev->ttport = hdev->ttport;
- 	} else if (udev->speed != USB_SPEED_HIGH
- 			&& hdev->speed == USB_SPEED_HIGH) {
--		if (!hub->tt.hub) {
-+		if (hdev->parent && !hub->tt.hub) {
- 			dev_err(&udev->dev, "parent hub has no TT\n");
- 			retval = -EINVAL;
- 			goto fail;
diff --git a/target/linux/lantiq/patches-3.9/0006-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.9/0006-SPI-MIPS-lantiq-adds-spi-xway.patch
deleted file mode 100644
index 1c32947..0000000
--- a/target/linux/lantiq/patches-3.9/0006-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ /dev/null
@@ -1,1022 +0,0 @@
-From b7494572c4198e619a95a903da151fc27fc84a10 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:29:37 +0100
-Subject: [PATCH 06/22] SPI: MIPS: lantiq: adds spi-xway
-
-This patch adds support for the SPI core found on several Lantiq SoCs.
-The Driver has been runtime tested in combination with m25p80 Flash Devices
-on Amazon_SE and VR9.
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig    |    8 +
- drivers/spi/Makefile   |    1 +
- drivers/spi/spi-xway.c |  977 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 986 insertions(+)
- create mode 100644 drivers/spi/spi-xway.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -470,6 +470,14 @@ config SPI_NUC900
- 	help
- 	  SPI driver for Nuvoton NUC900 series ARM SoCs
- 
-+config SPI_XWAY
-+	tristate "Lantiq XWAY SPI controller"
-+	depends on LANTIQ && SOC_TYPE_XWAY
-+	select SPI_BITBANG
-+	help
-+	  This driver supports the Lantiq SoC SPI controller in master
-+	  mode.
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -72,3 +72,4 @@ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-t
- obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
- obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
-+obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
---- /dev/null
-+++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,977 @@
-+/*
-+ * Lantiq SoC SPI controller
-+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/of_irq.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define LTQ_SPI_CLC		0x00	/* Clock control */
-+#define LTQ_SPI_PISEL		0x04	/* Port input select */
-+#define LTQ_SPI_ID		0x08	/* Identification */
-+#define LTQ_SPI_CON		0x10	/* Control */
-+#define LTQ_SPI_STAT		0x14	/* Status */
-+#define LTQ_SPI_WHBSTATE	0x18	/* Write HW modified state */
-+#define LTQ_SPI_TB		0x20	/* Transmit buffer */
-+#define LTQ_SPI_RB		0x24	/* Receive buffer */
-+#define LTQ_SPI_RXFCON		0x30	/* Receive FIFO control */
-+#define LTQ_SPI_TXFCON		0x34	/* Transmit FIFO control */
-+#define LTQ_SPI_FSTAT		0x38	/* FIFO status */
-+#define LTQ_SPI_BRT		0x40	/* Baudrate timer */
-+#define LTQ_SPI_BRSTAT		0x44	/* Baudrate timer status */
-+#define LTQ_SPI_SFCON		0x60	/* Serial frame control */
-+#define LTQ_SPI_SFSTAT		0x64	/* Serial frame status */
-+#define LTQ_SPI_GPOCON		0x70	/* General purpose output control */
-+#define LTQ_SPI_GPOSTAT		0x74	/* General purpose output status */
-+#define LTQ_SPI_FGPO		0x78	/* Forced general purpose output */
-+#define LTQ_SPI_RXREQ		0x80	/* Receive request */
-+#define LTQ_SPI_RXCNT		0x84	/* Receive count */
-+#define LTQ_SPI_DMACON		0xEC	/* DMA control */
-+#define LTQ_SPI_IRNEN		0xF4	/* Interrupt node enable */
-+#define LTQ_SPI_IRNICR		0xF8	/* Interrupt node interrupt capture */
-+#define LTQ_SPI_IRNCR		0xFC	/* Interrupt node control */
-+
-+#define LTQ_SPI_CLC_SMC_SHIFT	16	/* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_MASK	0xFF
-+#define LTQ_SPI_CLC_RMC_SHIFT	8	/* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_MASK	0xFF
-+#define LTQ_SPI_CLC_DISS	BIT(1)	/* Disable status bit */
-+#define LTQ_SPI_CLC_DISR	BIT(0)	/* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_SHIFT	24	/* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_MASK	0x3F
-+#define LTQ_SPI_ID_RXFS_SHIFT	16	/* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_MASK	0x3F
-+#define LTQ_SPI_ID_REV_MASK	0x1F	/* Hardware revision number */
-+#define LTQ_SPI_ID_CFG		BIT(5)	/* DMA interface support */
-+
-+#define LTQ_SPI_CON_BM_SHIFT	16	/* Data width selection */
-+#define LTQ_SPI_CON_BM_MASK	0x1F
-+#define LTQ_SPI_CON_EM		BIT(24)	/* Echo mode */
-+#define LTQ_SPI_CON_IDLE	BIT(23)	/* Idle bit value */
-+#define LTQ_SPI_CON_ENBV	BIT(22)	/* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN	BIT(12)	/* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN	BIT(11)	/* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN		BIT(10)	/* Abort error enable */
-+#define LTQ_SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB		BIT(7)	/* Loopback control */
-+#define LTQ_SPI_CON_PO		BIT(6)	/* Clock polarity control */
-+#define LTQ_SPI_CON_PH		BIT(5)	/* Clock phase control */
-+#define LTQ_SPI_CON_HB		BIT(4)	/* Heading control */
-+#define LTQ_SPI_CON_RXOFF	BIT(1)	/* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF	BIT(0)	/* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_MASK	0x7
-+#define LTQ_SPI_STAT_RXBV_SHIFT	28
-+#define LTQ_SPI_STAT_BSY	BIT(13)	/* Busy flag */
-+#define LTQ_SPI_STAT_RUE	BIT(12)	/* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE	BIT(11)	/* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE		BIT(10)	/* Abort error flag */
-+#define LTQ_SPI_STAT_RE		BIT(9)	/* Receive error flag */
-+#define LTQ_SPI_STAT_TE		BIT(8)	/* Transmit error flag */
-+#define LTQ_SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN		BIT(0)	/* Enable bit */
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error
-+						flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS	0x0F50
-+
-+#define LTQ_SPI_RXFCON_RXFITL_SHIFT	8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_MASK	0x3F
-+#define LTQ_SPI_RXFCON_RXFLU		BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN		BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_SHIFT	8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_MASK	0x3F
-+#define LTQ_SPI_TXFCON_TXFLU		BIT(1)	/* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN		BIT(0)	/* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_MASK	0x3f
-+#define LTQ_SPI_FSTAT_RXFFL_SHIFT	0
-+#define LTQ_SPI_FSTAT_TXFFL_MASK	0x3f
-+#define LTQ_SPI_FSTAT_TXFFL_SHIFT	8
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT	8
-+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT	0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_SHIFT	8
-+#define LTQ_SPI_FGPO_CLROUTN_SHIFT	0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_MASK	0xFFFF	/* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_MASK		0xFFFF	/* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T		BIT(1)	/* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R		BIT(0)	/* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL	0xF
-+
-+struct ltq_spi {
-+	struct spi_bitbang	bitbang;
-+	struct completion	done;
-+	spinlock_t		lock;
-+
-+	struct device		*dev;
-+	void __iomem		*base;
-+	struct clk		*fpiclk;
-+	struct clk		*spiclk;
-+
-+	int			status;
-+	int			irq[3];
-+
-+	const u8		*tx;
-+	u8			*rx;
-+	u32			tx_cnt;
-+	u32			rx_cnt;
-+	u32			len;
-+	struct spi_transfer	*curr_transfer;
-+
-+	u32 (*get_tx) (struct ltq_spi *);
-+
-+	u16			txfs;
-+	u16			rxfs;
-+	unsigned		dma_support:1;
-+	unsigned		cfg_mode:1;
-+};
-+
-+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
-+{
-+	return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
-+{
-+	return ioread32be(hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
-+{
-+	iowrite32be(val, hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+	u32 val;
-+
-+	val = ltq_spi_reg_read(hw, reg);
-+	val |= bits;
-+	ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+	u32 val;
-+
-+	val = ltq_spi_reg_read(hw, reg);
-+	val &= ~bits;
-+	ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static void ltq_spi_hw_enable(struct ltq_spi *hw)
-+{
-+	u32 clc;
-+
-+	/* Power-up module */
-+	clk_enable(hw->spiclk);
-+
-+	/*
-+	 * Set clock divider for run mode to 1 to
-+	 * run at same frequency as FPI bus
-+	 */
-+	clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
-+	ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
-+}
-+
-+static void ltq_spi_hw_disable(struct ltq_spi *hw)
-+{
-+	/* Set clock divider to 0 and set module disable bit */
-+	ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
-+
-+	/* Power-down module */
-+	clk_disable(hw->spiclk);
-+}
-+
-+static void ltq_spi_reset_fifos(struct ltq_spi *hw)
-+{
-+	u32 val;
-+
-+	/*
-+	 * Enable and flush FIFOs. Set interrupt trigger level to
-+	 * half of FIFO count implemented in hardware.
-+	 */
-+	if (hw->txfs > 1) {
-+		val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
-+		val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+		ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
-+	}
-+
-+	if (hw->rxfs > 1) {
-+		val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
-+		val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+		ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
-+	}
-+}
-+
-+static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
-+{
-+	u32 stat;
-+	unsigned long timeout;
-+
-+	timeout = jiffies + msecs_to_jiffies(200);
-+
-+	do {
-+		stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
-+		if (!(stat & LTQ_SPI_STAT_BSY))
-+			return 0;
-+
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
-+	dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
-+
-+	return -ETIMEDOUT;
-+}
-+
-+static void ltq_spi_config_mode_set(struct ltq_spi *hw)
-+{
-+	if (hw->cfg_mode)
-+		return;
-+
-+	/*
-+	 * Putting the SPI module in config mode is only safe if no
-+	 * transfer is in progress as indicated by busy flag STATE.BSY.
-+	 */
-+	if (ltq_spi_wait_ready(hw)) {
-+		ltq_spi_reset_fifos(hw);
-+		hw->status = -ETIMEDOUT;
-+	}
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
-+
-+	hw->cfg_mode = 1;
-+}
-+
-+static void ltq_spi_run_mode_set(struct ltq_spi *hw)
-+{
-+	if (!hw->cfg_mode)
-+		return;
-+
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
-+
-+	hw->cfg_mode = 0;
-+}
-+
-+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
-+{
-+	const u8 *tx = hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt++;
-+	hw->tx++;
-+
-+	return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
-+{
-+	const u16 *tx = (u16 *) hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt += 2;
-+	hw->tx += 2;
-+
-+	return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
-+{
-+	const u32 *tx = (u32 *) hw->tx;
-+	u32 data = *tx++;
-+
-+	hw->tx_cnt += 4;
-+	hw->tx += 4;
-+
-+	return data;
-+}
-+
-+static void ltq_spi_bits_per_word_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 bm;
-+	u8 bits_per_word = spi->bits_per_word;
-+
-+	/*
-+	 * Use either default value of SPI device or value
-+	 * from current transfer.
-+	 */
-+	if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
-+		bits_per_word = hw->curr_transfer->bits_per_word;
-+
-+	if (bits_per_word <= 8)
-+		hw->get_tx = ltq_spi_tx_word_u8;
-+	else if (bits_per_word <= 16)
-+		hw->get_tx = ltq_spi_tx_word_u16;
-+	else if (bits_per_word <= 32)
-+		hw->get_tx = ltq_spi_tx_word_u32;
-+
-+	/* CON.BM value = bits_per_word - 1 */
-+	bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
-+
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
-+			     LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
-+	ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_speed_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 br, max_speed_hz, spi_clk;
-+	u32 speed_hz = spi->max_speed_hz;
-+
-+	/*
-+	 * Use either default value of SPI device or value
-+	 * from current transfer.
-+	 */
-+	if (hw->curr_transfer && hw->curr_transfer->speed_hz)
-+		speed_hz = hw->curr_transfer->speed_hz;
-+
-+	/*
-+	 * SPI module clock is derived from FPI bus clock dependent on
-+	 * divider value in CLC.RMS which is always set to 1.
-+	 */
-+	spi_clk = clk_get_rate(hw->fpiclk);
-+
-+	/*
-+	 * Maximum SPI clock frequency in master mode is half of
-+	 * SPI module clock frequency. Maximum reload value of
-+	 * baudrate generator BR is 2^16.
-+	 */
-+	max_speed_hz = spi_clk / 2;
-+	if (speed_hz >= max_speed_hz)
-+		br = 0;
-+	else
-+		br = (max_speed_hz / speed_hz) - 1;
-+
-+	if (br > 0xFFFF)
-+		br = 0xFFFF;
-+
-+	ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
-+}
-+
-+static void ltq_spi_clockmode_set(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 con;
-+
-+	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+	/*
-+	 * SPI mode mapping in CON register:
-+	 * Mode CPOL CPHA CON.PO CON.PH
-+	 *  0    0    0      0      1
-+	 *  1    0    1      0      0
-+	 *  2    1    0      1      1
-+	 *  3    1    1      1      0
-+	 */
-+	if (spi->mode & SPI_CPHA)
-+		con &= ~LTQ_SPI_CON_PH;
-+	else
-+		con |= LTQ_SPI_CON_PH;
-+
-+	if (spi->mode & SPI_CPOL)
-+		con |= LTQ_SPI_CON_PO;
-+	else
-+		con &= ~LTQ_SPI_CON_PO;
-+
-+	/* Set heading control */
-+	if (spi->mode & SPI_LSB_FIRST)
-+		con &= ~LTQ_SPI_CON_HB;
-+	else
-+		con |= LTQ_SPI_CON_HB;
-+
-+	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
-+{
-+	u32 con;
-+
-+	con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+	if (t) {
-+		if (t->tx_buf && t->rx_buf) {
-+			con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+		} else if (t->rx_buf) {
-+			con &= ~LTQ_SPI_CON_RXOFF;
-+			con |= LTQ_SPI_CON_TXOFF;
-+		} else if (t->tx_buf) {
-+			con &= ~LTQ_SPI_CON_TXOFF;
-+			con |= LTQ_SPI_CON_RXOFF;
-+		}
-+	} else
-+		con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+
-+	ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_internal_cs_activate(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 fgpo;
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 fgpo;
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_chipselect(struct spi_device *spi, int cs)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+
-+	switch (cs) {
-+	case BITBANG_CS_ACTIVE:
-+		ltq_spi_bits_per_word_set(spi);
-+		ltq_spi_speed_set(spi);
-+		ltq_spi_clockmode_set(spi);
-+		ltq_spi_run_mode_set(hw);
-+		ltq_spi_internal_cs_activate(spi);
-+		break;
-+
-+	case BITBANG_CS_INACTIVE:
-+		ltq_spi_internal_cs_deactivate(spi);
-+		ltq_spi_config_mode_set(hw);
-+		break;
-+	}
-+}
-+
-+static int ltq_spi_setup_transfer(struct spi_device *spi,
-+				  struct spi_transfer *t)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u8 bits_per_word = spi->bits_per_word;
-+
-+	hw->curr_transfer = t;
-+
-+	if (t && t->bits_per_word)
-+		bits_per_word = t->bits_per_word;
-+
-+	if (bits_per_word > 32)
-+		return -EINVAL;
-+
-+	ltq_spi_config_mode_set(hw);
-+
-+	return 0;
-+}
-+
-+static int ltq_spi_setup(struct spi_device *spi)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 gpocon, fgpo;
-+
-+	/* Set default word length to 8 if not set */
-+	if (!spi->bits_per_word)
-+		spi->bits_per_word = 8;
-+
-+	if (spi->bits_per_word > 32)
-+		return -EINVAL;
-+
-+	/*
-+	 * Up to six GPIOs can be connected to the SPI module
-+	 * via GPIO alternate function to control the chip select lines.
-+	 */
-+	gpocon = (1 << (spi->chip_select +
-+			LTQ_SPI_GPOCON_ISCSBN_SHIFT));
-+
-+	if (spi->mode & SPI_CS_HIGH)
-+		gpocon |= (1 << spi->chip_select);
-+
-+	fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+
-+	ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
-+	ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+
-+	return 0;
-+}
-+
-+static void ltq_spi_cleanup(struct spi_device *spi)
-+{
-+
-+}
-+
-+static void ltq_spi_txfifo_write(struct ltq_spi *hw)
-+{
-+	u32 fstat, data;
-+	u16 fifo_space;
-+
-+	/* Determine how much FIFOs are free for TX data */
-+	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+	fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
-+					LTQ_SPI_FSTAT_TXFFL_MASK);
-+
-+	if (!fifo_space)
-+		return;
-+
-+	while (hw->tx_cnt < hw->len && fifo_space) {
-+		data = hw->get_tx(hw);
-+		ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
-+		fifo_space--;
-+	}
-+}
-+
-+static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
-+{
-+	u32 fstat, data, *rx32;
-+	u16 fifo_fill;
-+	u8 rxbv, shift, *rx8;
-+
-+	/* Determine how much FIFOs are filled with RX data */
-+	fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+	fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
-+			& LTQ_SPI_FSTAT_RXFFL_MASK);
-+
-+	if (!fifo_fill)
-+		return;
-+
-+	/*
-+	 * The 32 bit FIFO is always used completely independent from the
-+	 * bits_per_word value. Thus four bytes have to be read at once
-+	 * per FIFO.
-+	 */
-+	rx32 = (u32 *) hw->rx;
-+	while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
-+		*rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+		hw->rx_cnt += 4;
-+		hw->rx += 4;
-+		fifo_fill--;
-+	}
-+
-+	/*
-+	 * If there are remaining bytes, read byte count from STAT.RXBV
-+	 * register and read the data byte-wise.
-+	 */
-+	while (fifo_fill && hw->rx_cnt < hw->len) {
-+		rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
-+			LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
-+		data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+
-+		shift = (rxbv - 1) * 8;
-+		rx8 = hw->rx;
-+
-+		while (rxbv) {
-+			*rx8++ = (data >> shift) & 0xFF;
-+			rxbv--;
-+			shift -= 8;
-+			hw->rx_cnt++;
-+			hw->rx++;
-+		}
-+
-+		fifo_fill--;
-+	}
-+}
-+
-+static void ltq_spi_rxreq_set(struct ltq_spi *hw)
-+{
-+	u32 rxreq, rxreq_max, rxtodo;
-+
-+	rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
-+
-+	/*
-+	 * In RX-only mode the serial clock is activated only after writing
-+	 * the expected amount of RX bytes into RXREQ register.
-+	 * To avoid receive overflows at high clocks it is better to request
-+	 * only the amount of bytes that fits into all FIFOs. This value
-+	 * depends on the FIFO size implemented in hardware.
-+	 */
-+	rxreq = hw->len - hw->rx_cnt;
-+	rxreq_max = hw->rxfs << 2;
-+	rxreq = min(rxreq_max, rxreq);
-+
-+	if (!rxtodo && rxreq)
-+		ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
-+}
-+
-+static inline void ltq_spi_complete(struct ltq_spi *hw)
-+{
-+	complete(&hw->done);
-+}
-+
-+irqreturn_t ltq_spi_tx_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+	int completed = 0;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	if (hw->tx_cnt < hw->len)
-+		ltq_spi_txfifo_write(hw);
-+
-+	if (hw->tx_cnt == hw->len)
-+		completed = 1;
-+
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	if (completed)
-+		ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_rx_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+	int completed = 0;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	if (hw->rx_cnt < hw->len) {
-+		ltq_spi_rxfifo_read(hw);
-+
-+		if (hw->tx && hw->tx_cnt < hw->len)
-+			ltq_spi_txfifo_write(hw);
-+	}
-+
-+	if (hw->rx_cnt == hw->len)
-+		completed = 1;
-+	else if (!hw->tx)
-+		ltq_spi_rxreq_set(hw);
-+
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	if (completed)
-+		ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_err_irq(int irq, void *data)
-+{
-+	struct ltq_spi *hw = data;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&hw->lock, flags);
-+
-+	/* Disable all interrupts */
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+	/* Clear all error flags */
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+	/* Flush FIFOs */
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
-+
-+	hw->status = -EIO;
-+	spin_unlock_irqrestore(&hw->lock, flags);
-+
-+	ltq_spi_complete(hw);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+	struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+	u32 irq_flags = 0;
-+
-+	hw->tx = t->tx_buf;
-+	hw->rx = t->rx_buf;
-+	hw->len = t->len;
-+	hw->tx_cnt = 0;
-+	hw->rx_cnt = 0;
-+	hw->status = 0;
-+	INIT_COMPLETION(hw->done);
-+
-+	ltq_spi_xmit_set(hw, t);
-+
-+	/* Enable error interrupts */
-+	ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
-+
-+	if (hw->tx) {
-+		/* Initially fill TX FIFO with as much data as possible */
-+		ltq_spi_txfifo_write(hw);
-+		irq_flags |= LTQ_SPI_IRNEN_T;
-+
-+		/* Always enable RX interrupt in Full Duplex mode */
-+		if (hw->rx)
-+			irq_flags |= LTQ_SPI_IRNEN_R;
-+	} else if (hw->rx) {
-+		/* Start RX clock */
-+		ltq_spi_rxreq_set(hw);
-+
-+		/* Enable RX interrupt to receive data from RX FIFOs */
-+		irq_flags |= LTQ_SPI_IRNEN_R;
-+	}
-+
-+	/* Enable TX or RX interrupts */
-+	ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
-+	wait_for_completion_interruptible(&hw->done);
-+
-+	/* Disable all interrupts */
-+	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+	/*
-+	 * Return length of current transfer for bitbang utility code if
-+	 * no errors occured during transmission.
-+	 */
-+	if (!hw->status)
-+		hw->status = hw->len;
-+
-+	return hw->status;
-+}
-+
-+static const struct ltq_spi_irq_map {
-+	char *name;
-+	irq_handler_t handler;
-+} ltq_spi_irqs[] = {
-+	{ "spi_rx", ltq_spi_rx_irq },
-+	{ "spi_tx", ltq_spi_tx_irq },
-+	{ "spi_err", ltq_spi_err_irq },
-+};
-+
-+static int ltq_spi_probe(struct platform_device *pdev)
-+{
-+	struct resource irqres[3];
-+	struct spi_master *master;
-+	struct resource *r;
-+	struct ltq_spi *hw;
-+	int ret, i;
-+	u32 data, id;
-+
-+	if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) {
-+		dev_err(&pdev->dev, "IRQ settings missing in device tree\n");
-+		return -EINVAL;
-+	}
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
-+	if (!master) {
-+		dev_err(&pdev->dev, "spi_alloc_master\n");
-+		ret = -ENOMEM;
-+		goto err;
-+	}
-+
-+	hw = spi_master_get_devdata(master);
-+
-+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (r == NULL) {
-+		dev_err(&pdev->dev, "platform_get_resource\n");
-+		ret = -ENOENT;
-+		goto err_master;
-+	}
-+
-+	r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
-+			pdev->name);
-+	if (!r) {
-+		dev_err(&pdev->dev, "failed to request memory region\n");
-+		ret = -ENXIO;
-+		goto err_master;
-+	}
-+
-+	hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
-+	if (!hw->base) {
-+		dev_err(&pdev->dev, "failed to remap memory region\n");
-+		ret = -ENXIO;
-+		goto err_master;
-+	}
-+
-+	memset(hw->irq, 0, sizeof(hw->irq));
-+	for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
-+		hw->irq[i] = irqres[i].start;
-+		ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
-+				  0, ltq_spi_irqs[i].name, hw);
-+		if (ret) {
-+			dev_err(&pdev->dev, "failed to request %s irq (%d)\n",
-+					ltq_spi_irqs[i].name, hw->irq[i]);
-+			goto err_irq;
-+		}
-+	}
-+
-+	hw->fpiclk = clk_get_fpi();
-+	if (IS_ERR(hw->fpiclk)) {
-+		dev_err(&pdev->dev, "failed to get fpi clock\n");
-+		ret = PTR_ERR(hw->fpiclk);
-+		goto err_clk;
-+	}
-+
-+	hw->spiclk = clk_get(&pdev->dev, NULL);
-+	if (IS_ERR(hw->spiclk)) {
-+		dev_err(&pdev->dev, "failed to get spi clock gate\n");
-+		ret = PTR_ERR(hw->spiclk);
-+		goto err_clk;
-+	}
-+
-+	hw->bitbang.master = spi_master_get(master);
-+	hw->bitbang.chipselect = ltq_spi_chipselect;
-+	hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
-+	hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
-+
-+	if (of_machine_is_compatible("lantiq,ase"))
-+		master->num_chipselect = 3;
-+	else
-+		master->num_chipselect = 6;
-+	master->bus_num = pdev->id;
-+	master->setup = ltq_spi_setup;
-+	master->cleanup = ltq_spi_cleanup;
-+	master->dev.of_node = pdev->dev.of_node;
-+
-+	hw->dev = &pdev->dev;
-+	init_completion(&hw->done);
-+	spin_lock_init(&hw->lock);
-+
-+	ltq_spi_hw_enable(hw);
-+
-+	/* Read module capabilities */
-+	id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
-+	hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+	hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+	hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
-+
-+	ltq_spi_config_mode_set(hw);
-+
-+	/* Enable error checking, disable TX/RX, set idle value high */
-+	data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+	    LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
-+	    LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
-+	ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
-+
-+	/* Enable master mode and clear error flags */
-+	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
-+			  LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+	/* Reset GPIO/CS registers */
-+	ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
-+	ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
-+
-+	/* Enable and flush FIFOs */
-+	ltq_spi_reset_fifos(hw);
-+
-+	ret = spi_bitbang_start(&hw->bitbang);
-+	if (ret) {
-+		dev_err(&pdev->dev, "spi_bitbang_start failed\n");
-+		goto err_bitbang;
-+	}
-+
-+	platform_set_drvdata(pdev, hw);
-+
-+	pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
-+		id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
-+
-+	return 0;
-+
-+err_bitbang:
-+	ltq_spi_hw_disable(hw);
-+
-+err_clk:
-+	if (hw->fpiclk)
-+		clk_put(hw->fpiclk);
-+	if (hw->spiclk)
-+		clk_put(hw->spiclk);
-+
-+err_irq:
-+	clk_put(hw->fpiclk);
-+
-+	for (; i > 0; i--)
-+		free_irq(hw->irq[i], hw);
-+
-+err_master:
-+	spi_master_put(master);
-+
-+err:
-+	return ret;
-+}
-+
-+static int ltq_spi_remove(struct platform_device *pdev)
-+{
-+	struct ltq_spi *hw = platform_get_drvdata(pdev);
-+	int ret, i;
-+
-+	ret = spi_bitbang_stop(&hw->bitbang);
-+	if (ret)
-+		return ret;
-+
-+	platform_set_drvdata(pdev, NULL);
-+
-+	ltq_spi_config_mode_set(hw);
-+	ltq_spi_hw_disable(hw);
-+
-+	for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
-+		if (0 < hw->irq[i])
-+			free_irq(hw->irq[i], hw);
-+
-+	if (hw->fpiclk)
-+		clk_put(hw->fpiclk);
-+	if (hw->spiclk)
-+		clk_put(hw->spiclk);
-+
-+	spi_master_put(hw->bitbang.master);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id ltq_spi_match[] = {
-+	{ .compatible = "lantiq,spi-xway" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, ltq_spi_match);
-+
-+static struct platform_driver ltq_spi_driver = {
-+	.probe = ltq_spi_probe,
-+	.remove = ltq_spi_remove,
-+	.driver = {
-+		.name = "spi-xway",
-+		.owner = THIS_MODULE,
-+		.of_match_table = ltq_spi_match,
-+	},
-+};
-+
-+module_platform_driver(ltq_spi_driver);
-+
-+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:spi-xway");
diff --git a/target/linux/lantiq/patches-3.9/0011-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.9/0011-MIPS-lantiq-add-pcie-driver.patch
deleted file mode 100644
index 4dd11e7..0000000
--- a/target/linux/lantiq/patches-3.9/0011-MIPS-lantiq-add-pcie-driver.patch
+++ /dev/null
@@ -1,4734 +0,0 @@
-From 7bd0d6e0f0aaa06267989b0d0d51f9d2aff25814 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 09:39:02 +0100
-Subject: [PATCH 11/22] MIPS: lantiq: add pcie driver
-
----
- arch/mips/lantiq/Kconfig           |   10 +
- arch/mips/lantiq/xway/sysctrl.c    |    2 +
- arch/mips/pci/Makefile             |    2 +
- arch/mips/pci/fixup-lantiq-pcie.c  |   82 ++
- arch/mips/pci/fixup-lantiq.c       |    3 +
- arch/mips/pci/ifxmips_pci_common.h |   57 ++
- arch/mips/pci/ifxmips_pcie.c       | 1607 ++++++++++++++++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie.h       |  135 +++
- arch/mips/pci/ifxmips_pcie_ar10.h  |  290 +++++++
- arch/mips/pci/ifxmips_pcie_msi.c   |  392 +++++++++
- arch/mips/pci/ifxmips_pcie_phy.c   |  478 +++++++++++
- arch/mips/pci/ifxmips_pcie_pm.c    |  176 ++++
- arch/mips/pci/ifxmips_pcie_pm.h    |   36 +
- arch/mips/pci/ifxmips_pcie_reg.h   | 1001 ++++++++++++++++++++++
- arch/mips/pci/ifxmips_pcie_vr9.h   |  271 ++++++
- arch/mips/pci/pci.c                |   25 +
- drivers/pci/pcie/aer/Kconfig       |    2 +-
- include/linux/pci.h                |    2 +
- include/linux/pci_ids.h            |    6 +
- 19 files changed, 4576 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pci_common.h
- create mode 100644 arch/mips/pci/ifxmips_pcie.c
- create mode 100644 arch/mips/pci/ifxmips_pcie.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c
- create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h
- create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -18,6 +18,7 @@ config SOC_XWAY
- 	bool "XWAY"
- 	select SOC_TYPE_XWAY
- 	select HW_HAS_PCI
-+	select ARCH_SUPPORTS_MSI
- 
- config SOC_FALCON
- 	bool "FALCON"
-@@ -37,6 +38,15 @@ config PCI_LANTIQ
- 	bool "PCI Support"
- 	depends on SOC_XWAY && PCI
- 
-+config PCIE_LANTIQ
-+	bool "PCIE Support"
-+	depends on SOC_XWAY && PCI
-+
-+config PCIE_LANTIQ_MSI
-+	bool
-+	depends on PCIE_LANTIQ && PCI_MSI
-+	default y
-+
- config XRX200_PHY_FW
- 	bool "XRX200 PHY firmware loader"
- 	depends on SOC_XWAY
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
- 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- 				PMU_PPE_QSB | PMU_PPE_TOP);
- 		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
-+		pmu_w32(~0, PMU_PWDSR1);
-+		pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR);
- 	} else if (of_machine_is_compatible("lantiq,ar9")) {
- 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- 				ltq_ar9_fpi_hz(), CLOCK_250M);
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1
- obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_PCIE_LANTIQ)	+= ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ_MSI)	+= pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq-pcie.c
-@@ -0,0 +1,82 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_fixup_pcie.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe 
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_fixup_pcie.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe Fixup functions source file
-+*/
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/pci_ids.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "pcie-lantiq.h"
-+
-+#define PCI_VENDOR_ID_INFINEON         0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE  0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE    0x0011
-+#define PCI_VENDOR_ID_LANTIQ        0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE       0x0011
-+
-+
-+
-+static void __devinit
-+ifx_pcie_fixup_resource(struct pci_dev *dev)
-+{
-+    u32 reg;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    printk("%s: fixup host controller %s (%04x:%04x)\n", 
-+        __func__, pci_name(dev), dev->vendor, dev->device); 
-+
-+   /* Setup COMMAND register */
-+    reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | 
-+          PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
-+    pci_write_config_word(dev, PCI_COMMAND, reg);
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-+
-+static void __devinit
-+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+    if (dev->devfn == PCI_DEVFN(0, 0) &&
-+        (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-+
-+        dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-+
-+        printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
-+    }
-+    IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+    mdelay(10);
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
-+     ifx_pcie_rc_class_early_fixup);
---- a/arch/mips/pci/fixup-lantiq.c
-+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -11,6 +11,7 @@
- 
- int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL;
- int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL;
-+int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
- 
- int pcibios_plat_dev_init(struct pci_dev *dev)
- {
-@@ -28,6 +29,8 @@ int __init pcibios_map_irq(const struct
- 	struct of_irq dev_irq;
- 	int irq;
- 
-+	if (ltq_pci_map_irq)
-+		return ltq_pci_map_irq(dev, slot, pin);
- 	if (of_irq_map_pci(dev, &dev_irq)) {
- 		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
- 			slot, pin);
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pci_common.h
-@@ -0,0 +1,57 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pci_common.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCI subsystem
-+**
-+** DATE         : 30 June 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    30 June,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+
-+#ifndef IFXMIPS_PCI_COMMON_H
-+#define IFXMIPS_PCI_COMMON_H
-+#include <linux/version.h>
-+/*!
-+ \defgroup IFX_PCI_COM  IFX PCI/PCIe common parts for OS integration  
-+ \brief  PCI/PCIe common parts
-+*/
-+
-+/*!
-+ \defgroup IFX_PCI_COM_OS OS APIs
-+ \ingroup IFX_PCI_COM
-+ \brief PCI/PCIe bus driver OS interface functions
-+*/
-+/*!
-+  \file ifxmips_pci_common.h
-+  \ingroup IFX_PCI_COM
-+  \brief PCI/PCIe bus driver common OS header file
-+*/
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-+#define IFX_PCI_CONST
-+#else
-+#define IFX_PCI_CONST const
-+#endif
-+#ifdef CONFIG_IFX_PCI
-+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev);
-+#endif /* COFNIG_IFX_PCI */
-+
-+#ifdef CONFIG_IFX_PCIE
-+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin);
-+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev);
-+#endif
-+
-+#endif /* IFXMIPS_PCI_COMMON_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -0,0 +1,1607 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCI MSI sub module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    02 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+ /*!
-+  \file ifxmips_pcie.c
-+  \ingroup IFX_PCIE
-+  \brief PCI express bus driver source file
-+*/
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <asm/paccess.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/module.h>
-+
-+#include "ifxmips_pcie.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+#define IFX_PCIE_VER_MAJOR          1
-+#define IFX_PCIE_VER_MID            5
-+#define IFX_PCIE_VER_MINOR          3
-+
-+/* Enable 32bit io due to its mem mapped io nature */
-+#define IFX_PCIE_ERROR_INT
-+#define CONFIG_IFX_PCIE_1ST_CORE
-+#define IFX_PCIE_IO_32BIT
-+
-+#define IFX_PCIE_IR                     (INT_NUM_IM4_IRL0 + 25)
-+#define IFX_PCIE_INTA                   (INT_NUM_IM4_IRL0 + 8)
-+#define IFX_PCIE_INTB                   (INT_NUM_IM4_IRL0 + 9)
-+#define IFX_PCIE_INTC                   (INT_NUM_IM4_IRL0 + 10)
-+#define IFX_PCIE_INTD                   (INT_NUM_IM4_IRL0 + 11)
-+#define MS(_v, _f)  (((_v) & (_f)) >> _f##_S)
-+#define SM(_v, _f)  (((_v) << _f##_S) & (_f))
-+#define IFX_REG_SET_BIT(_f, _r) \
-+	IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-+
-+static DEFINE_SPINLOCK(ifx_pcie_lock);
-+
-+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+
-+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .ir_irq = {
-+            .irq  = IFX_PCIE_IR,
-+            .name = "ifx_pcie_rc0",
-+        },
-+
-+        .legacy_irq = {
-+            {
-+                .irq_bit = PCIE_IRN_INTA,
-+                .irq     = IFX_PCIE_INTA,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTB,
-+                .irq     = IFX_PCIE_INTB,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTC,
-+                .irq     = IFX_PCIE_INTC,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTD,
-+                .irq     = IFX_PCIE_INTD,
-+            },
-+        },
-+    },
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    {
-+        .ir_irq = {
-+            .irq  = IFX_PCIE1_IR,
-+            .name = "ifx_pcie_rc1",
-+        },
-+
-+        .legacy_irq = {
-+            {
-+                .irq_bit = PCIE_IRN_INTA,
-+                .irq     = IFX_PCIE1_INTA,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTB,
-+                .irq     = IFX_PCIE1_INTB,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTC,
-+                .irq     = IFX_PCIE1_INTC,
-+            },
-+            {
-+                .irq_bit = PCIE_IRN_INTD,
-+                .irq     = IFX_PCIE1_INTD,
-+            },
-+        },
-+
-+    },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+void 
-+ifx_pcie_debug(const char *fmt, ...)
-+{
-+    static char buf[256] = {0};      /* XXX */
-+    va_list ap;
-+
-+    va_start(ap, fmt);
-+    vsnprintf(buf, sizeof(buf), fmt, ap);
-+    va_end(ap); 
-+
-+    printk("%s", buf);
-+}
-+
-+#ifdef IFX_PCI_PHY_DBG
-+/* Generate hot reset, XXX must catpure to verify */
-+static INLINE void 
-+pcie_secondary_bus_reset(int pcie_port)
-+{
-+    int i;
-+    u32 reg;
-+#define IFX_PCIE_RESET_TIME   20
-+
-+    /* Assert Secondary Bus Reset */
-+    reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+    reg |= PCIE_INTRBCTRL_RST_SECONDARY_BUS;
-+    IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+    /* De-assert Secondary Bus Reset */
-+    reg &= ~PCIE_INTRBCTRL_RST_SECONDARY_BUS;
-+    IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+    /* XXX, wait at least 100 ms, then restore again */
-+    for (i = 0; i < IFX_PCIE_RESET_TIME; i++) {
-+        mdelay(10);
-+    }
-+#undef IFX_PCIE_RESET_TIME
-+}
-+
-+/* Error or L0s to L0 */
-+static INLINE int 
-+pcie_retrain_link(int pcie_port)
-+{
-+    int i;
-+    u32 reg;
-+#define IFX_PCIE_RETRAIN_TIME  1000
-+
-+    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+    reg |= PCIE_LCTLSTS_RETRIAN_LINK;
-+    IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+
-+    /* Wait for the link to come up */
-+    for (i = 0; i < IFX_PCIE_RETRAIN_TIME; i++) {
-+        if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
-+            break;
-+        }
-+        udelay(100);
-+    }
-+    if (i >= IFX_PCIE_RETRAIN_TIME) {
-+        IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s retrain timeout\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+#undef IFX_PCIE_RETRAIN_TIME
-+}
-+
-+static INLINE void 
-+pcie_disable_scrambling(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+    reg |= PCIE_PLCR_SCRAMBLE_DISABLE;
-+    IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+}
-+#endif /* IFX_PCI_PHY_DBG */
-+
-+static INLINE int 
-+pcie_ltssm_enable(int pcie_port) 
-+{
-+    int i;
-+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-+
-+    IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
-+
-+    /* Wait for the link to come up */
-+    for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
-+        if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
-+            break;
-+        }
-+        udelay(10);
-+    }
-+    if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
-+        IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+#undef IFX_PCIE_LTSSM_ENABLE_TIMEOUT
-+}
-+
-+static INLINE void 
-+pcie_ltssm_disable(int pcie_port) 
-+{
-+    IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RC_CCR 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_RC_CCR(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_ahb_bus_error_suppress(int pcie_port)
-+{
-+    IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-+}
-+
-+static INLINE void 
-+pcie_status_register_clear(int pcie_port)
-+{
-+   /* Clear the status register, XXX, seperate function */
-+    IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
-+    IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
-+    IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
-+    IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
-+    IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
-+    IFX_REG_W32(0, PCIE_RSTS(pcie_port));
-+    IFX_REG_W32(0, PCIE_UES_R(pcie_port));
-+    IFX_REG_W32(0, PCIE_UEMR(pcie_port));
-+    IFX_REG_W32(0, PCIE_UESR(pcie_port));
-+    IFX_REG_W32(0, PCIE_CESR(pcie_port));
-+    IFX_REG_W32(0, PCIE_CEMR(pcie_port));
-+    IFX_REG_W32(0, PCIE_RESR(pcie_port));
-+    IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
-+    IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
-+    IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
-+    IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
-+    IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
-+    IFX_REG_W32(0, PCIE_QSR(pcie_port));
-+    IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-+}
-+
-+static inline int 
-+ifx_pcie_link_up(int pcie_port)
-+{
-+    return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-+}
-+
-+#ifdef IFX_PCIE_DBG
-+static void 
-+pcie_status_registers_dump(int pcie_port)
-+{
-+    printk(KERN_INFO "PCIe_PCICMDSTS: 0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_RC_DR:     0x%08x\n", IFX_REG_R32(PCIE_RC_DR(pcie_port)));
-+    printk(KERN_INFO "PCIe_DCTLSTS:   0x%08x\n", IFX_REG_R32(PCIE_DCTLSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_LCTLSTS:   0x%08x\n", IFX_REG_R32(PCIE_LCTLSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_SLCTLSTS:  0x%08x\n", IFX_REG_R32(PCIE_SLCTLSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_RSTS:      0x%08x\n", IFX_REG_R32(PCIE_RSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_UES_R:     0x%08x\n", IFX_REG_R32(PCIE_UES_R(pcie_port)));
-+    printk(KERN_INFO "PCIe_UEMR:      0x%08x\n", IFX_REG_R32(PCIE_UEMR(pcie_port)));
-+    printk(KERN_INFO "PCIe_UESR:      0x%08x\n", IFX_REG_R32(PCIE_UESR(pcie_port)));
-+    printk(KERN_INFO "PCIe_CESR:      0x%08x\n", IFX_REG_R32(PCIE_CESR(pcie_port)));
-+    printk(KERN_INFO "PCIe_CEMR:      0x%08x\n", IFX_REG_R32(PCIE_CEMR(pcie_port)));
-+    printk(KERN_INFO "PCIe_RESR:      0x%08x\n", IFX_REG_R32(PCIE_RESR(pcie_port)));
-+    printk(KERN_INFO "PCIe_ESIR:      0x%08x\n", IFX_REG_R32(PCIE_ESIR(pcie_port)));
-+    printk(KERN_INFO "PCIe_PVCCRSR:   0x%08x\n", IFX_REG_R32(PCIE_PVCCRSR(pcie_port)));
-+    printk(KERN_INFO "PCIe_VC0_RSR0:  0x%08x\n", IFX_REG_R32(PCIE_VC0_RSR0(pcie_port)));
-+    printk(KERN_INFO "PCIe_TPFCS:     0x%08x\n", IFX_REG_R32(PCIE_TPFCS(pcie_port)));
-+    printk(KERN_INFO "PCIe_TNPFCS:    0x%08x\n", IFX_REG_R32(PCIE_TNPFCS(pcie_port)));
-+    printk(KERN_INFO "PCIe_TCFCS:     0x%08x\n", IFX_REG_R32(PCIE_TCFCS(pcie_port)));
-+    printk(KERN_INFO "PCIe_QSR:       0x%08x\n", IFX_REG_R32(PCIE_QSR(pcie_port)));
-+    printk(KERN_INFO "PCIe_VCTAR1:    0x%08x\n", IFX_REG_R32(PCIE_VCTAR1(pcie_port)));
-+    printk(KERN_INFO "PCIe_VCTAR2:    0x%08x\n", IFX_REG_R32(PCIE_VCTAR2(pcie_port)));
-+    printk(KERN_INFO "PCIe_IOBLSECS:  0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
-+    printk(KERN_INFO "PCIe_ALTRT:     0x%08x\n", IFX_REG_R32(PCIE_ALTRT(pcie_port)));
-+    printk(KERN_INFO "PCIe_SNR:       0x%08x\n", IFX_REG_R32(PCIE_SNR(pcie_port)));
-+    printk(KERN_INFO "PCIe_DBR0:      0x%08x\n", IFX_REG_R32(PCIE_DBR0(pcie_port)));
-+    printk(KERN_INFO "PCIe_DBR1:      0x%08x\n", IFX_REG_R32(PCIE_DBR1(pcie_port)));
-+}
-+
-+static void 
-+pcie_post_dump(int pcie_port)
-+{
-+    printk(KERN_INFO "PCIe_PCICMDSTS:  0x%08x\n", IFX_REG_R32(PCIE_PCICMDSTS(pcie_port)));
-+    printk(KERN_INFO "PCIe_MBML:       0x%08x\n", IFX_REG_R32(PCIE_MBML(pcie_port)));
-+    printk(KERN_INFO "PCIe_PBML:       0x%08x\n", IFX_REG_R32(PCIE_PMBL(pcie_port)));
-+    printk(KERN_INFO "PCIe_IOBLSECS:   0x%08x\n", IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
-+    printk(KERN_INFO "PCIe_IO_BANDL:   0x%08x\n", IFX_REG_R32(PCIE_IO_BANDL(pcie_port)));
-+    printk(KERN_INFO "PCIe_INTRBCTRL:  0x%08x\n", IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)));
-+    printk(KERN_INFO "Power State:     D%1d\n", IFX_REG_R32(PCIE_PM_CSR(pcie_port)) & PCIE_PM_CSR_POWER_STATE);
-+    printk(KERN_INFO "Negotiated Link Width: %d\n", MS(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)), PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH));
-+    printk(KERN_INFO "Number of VCs:    %d\n", IFX_REG_R32(PCIE_PVC1(pcie_port)) & PCIE_PVC1_EXT_VC_CNT);
-+    printk(KERN_INFO "Low-priority VCs: %d\n", MS(IFX_REG_R32(PCIE_PVC1(pcie_port)), PCIE_PVC1_LOW_PRI_EXT_VC_CNT));
-+    printk(KERN_INFO "VC Arbitration:   0x%08x\n", IFX_REG_R32(PCIE_PVC2(pcie_port)) & PCIE_PVC2_VC_ARB_WRR);
-+    printk(KERN_INFO "Port Arbitration: 0x%08x\n", IFX_REG_R32(PCIE_VC0_RC(pcie_port)) & PCIE_VC0_RC_PORT_ARB);
-+
-+    if (ifx_pcie_link_up(pcie_port)) {
-+        printk(KERN_INFO "PCIe PHY Link is UP\n");
-+    }
-+    else {
-+        printk(KERN_INFO "PCIe PHY Link is DOWN!\n");
-+    }
-+    if ((IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+        printk(KERN_INFO "PCIe DLL is UP\n");
-+    }
-+    else {
-+        printk(KERN_INFO "PCIe DLL is DOWN!\n");
-+    }
-+
-+    if ((IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+        printk(KERN_INFO "PCIE_LCTLSTS in DL_Active state!\n");
-+    }
-+    else {
-+        printk(KERN_INFO "PCIE_LCTLSTS NOT in DL_Active state!\n");
-+    }
-+ }
-+#endif /* IFX_PCIE_DBG */
-+
-+/* XXX, this function is not needed in fact */
-+static INLINE void
-+pcie_mem_io_setup(int pcie_port)
-+{
-+    u32 reg;
-+    /*
-+     * BAR[0:1] readonly register 
-+     * RC contains only minimal BARs for packets mapped to this device 
-+     * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
-+     * reside on the downstream side fo the bridge.
-+     */
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
-+
-+    IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MBML: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_MBML(pcie_port)));
-+
-+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT
-+    reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR)
-+        | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT)
-+        | PCIE_PMBL_64BIT_ADDR;
-+    IFX_REG_W32(reg, PCIE_PMBL(pcie_port));
-+
-+    /* Must configure upper 32bit */
-+    IFX_REG_W32(0, PCIE_PMBU32(pcie_port));
-+    IFX_REG_W32(0, PCIE_PMLU32(pcie_port));
-+#else
-+    /* PCIe_PBML, same as MBML */
-+    IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-+#endif 
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PMBL: 0x%08x\n",
-+    __func__, IFX_REG_R32(PCIE_PMBL(pcie_port)));
-+
-+    /* IO Address Range */
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
-+#ifdef IFX_PCIE_IO_32BIT    
-+    reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
-+#endif /* IFX_PCIE_IO_32BIT */
-+    IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IOBLSECS: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_IOBLSECS(pcie_port)));
-+#ifdef IFX_PCIE_IO_32BIT
-+    reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
-+        | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
-+    IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IO_BANDL: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_IO_BANDL(pcie_port)));
-+#endif /* IFX_PCIE_IO_32BIT */
-+}
-+
-+static INLINE void
-+pcie_msi_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* XXX, MSI stuff should only apply to EP */
-+    /* MSI Capability: Only enable 32-bit addresses */
-+    reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
-+    reg &= ~PCIE_MCAPR_ADDR64_CAP;
-+
-+    reg |= PCIE_MCAPR_MSI_ENABLE;
-+
-+    /* Disable multiple message */
-+    reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
-+    IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_MCAPR: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_MCAPR(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_pm_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Enable PME, Soft reset enabled */
-+    reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
-+    reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
-+    IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PM_CSR: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_PM_CSR(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_bus_setup(int pcie_port) 
-+{
-+    u32 reg;
-+
-+    reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
-+    IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_BNR: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_BNR(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_device_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Device capability register, set up Maximum payload size */
-+    reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
-+    reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-+
-+    /* Only available for EP */
-+    reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
-+    IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCAP: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_DCAP(pcie_port)));
-+
-+    /* Device control and status register */
-+    /* Set Maximum Read Request size for the device as a Requestor */
-+    reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-+
-+    /* 
-+     * Request size can be larger than the MPS used, but the completions returned 
-+     * for the read will be bounded by the MPS size.
-+     * In our system, Max request size depends on AHB burst size. It is 64 bytes.
-+     * but we set it as 128 as minimum one.
-+     */
-+    reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
-+            | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-+
-+    /* Enable relaxed ordering, no snoop, and all kinds of errors */
-+    reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-+
-+    IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_DCTLSTS: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_DCTLSTS(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_link_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /*
-+     * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM 
-+     * L0s is reported during link training via TS1 order set by N_FTS
-+     */
-+    reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
-+    reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
-+    reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
-+    IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCAP: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_LCAP(pcie_port)));
-+
-+    /* Link control and status register */
-+    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+    /* Link Enable, ASPM enabled  */
-+    reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-+
-+#ifdef CONFIG_PCIEASPM
-+    /*  
-+     * We use the same physical reference clock that the platform provides on the connector 
-+     * It paved the way for ASPM to calculate the new exit Latency
-+     */
-+    reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
-+    reg |= PCIE_LCTLSTS_COM_CLK_CFG;
-+    /*
-+     * We should disable ASPM by default except that we have dedicated power management support
-+     * Enable ASPM will cause the system hangup/instability, performance degration
-+     */
-+    reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-+#else
-+    reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-+#endif /* CONFIG_PCIEASPM */
-+
-+    /* 
-+     * The maximum size of any completion with data packet is bounded by the MPS setting 
-+     * in  device control register 
-+     */
-+
-+    /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
-+    reg &= ~ PCIE_LCTLSTS_RCB128;
-+
-+    IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LCTLSTS: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_LCTLSTS(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_error_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* 
-+     * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone 
-+     * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE 
-+     */
-+    reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+    reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-+
-+    IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_INTRBCTRL: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)));
-+
-+    /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
-+    reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
-+    reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
-+    IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UEMR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_UEMR(pcie_port)));
-+
-+    /* Uncorrectable Error Severity Register, ALL errors are FATAL */
-+    IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_UESR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_UESR(pcie_port)));
-+
-+    /* Correctable Error Mask Register, unmask <enable> all bits */
-+    reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
-+    reg &= ~PCIE_CORRECTABLE_ERR;
-+    IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_CEMR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_CEMR(pcie_port)));
-+
-+    /* Advanced Error Capabilities and Control Registr */
-+    reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
-+    reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
-+    IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AECCR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_AECCR(pcie_port)));
-+
-+    /* Root Error Command Register, Report all types of errors */
-+    reg = IFX_REG_R32(PCIE_RECR(pcie_port));
-+    reg |= PCIE_RECR_ERR_REPORT_EN;
-+    IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RECR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_RECR(pcie_port)));
-+
-+    /* Clear the Root status register */ 
-+    reg = IFX_REG_R32(PCIE_RESR(pcie_port));
-+    IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-+}
-+
-+static INLINE void
-+pcie_root_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Root control and capabilities register */
-+    reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
-+    reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
-+    IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_RCTLCAP: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_RCTLCAP(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_vc_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Port VC Capability Register 2 */
-+    reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
-+    reg &= ~PCIE_PVC2_VC_ARB_WRR;
-+    reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
-+    IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PVC2: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_PVC2(pcie_port)));
-+
-+    /* VC0 Resource Capability Register */
-+    reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
-+    reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
-+    IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_RC: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_VC0_RC(pcie_port)));
-+}
-+
-+static INLINE void
-+pcie_port_logic_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0  */
-+    reg = IFX_REG_R32(PCIE_AFR(pcie_port));
-+    reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
-+    reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
-+        | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
-+    /* L0s and L1 entry latency */
-+    reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
-+    reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
-+        | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
-+    IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_AFR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_AFR(pcie_port)));
-+
-+    /* Port Link Control Register */
-+    reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+    reg |= PCIE_PLCR_DLL_LINK_EN;  /* Enable the DLL link */
-+    IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_PLCR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_PLCR(pcie_port)));
-+
-+    /* Lane Skew Register */
-+    reg = IFX_REG_R32(PCIE_LSR(pcie_port));
-+    /* Enable ACK/NACK and FC */
-+    reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); 
-+    IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_LSR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_LSR(pcie_port)));
-+
-+    /* Symbol Timer Register and Filter Mask Register 1 */
-+    reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-+
-+    /* Default SKP interval is very accurate already, 5us */
-+    /* Enable IO/CFG transaction */
-+    reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
-+    /* Disable FC WDT */
-+    reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
-+    IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_STRFMR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_STRFMR(pcie_port)));
-+
-+    /* Filter Masker Register 2 */
-+    reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
-+    reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
-+    IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_FMR2: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_FMR2(pcie_port)));
-+
-+    /* VC0 Completion Receive Queue Control Register */
-+    reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
-+    reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
-+    reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
-+    IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_VC0_CRQCR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)));
-+}
-+
-+static INLINE void 
-+pcie_rc_cfg_reg_setup(int pcie_port)
-+{
-+    pcie_ltssm_disable(pcie_port);
-+    pcie_mem_io_setup(pcie_port);
-+    pcie_msi_setup(pcie_port);
-+    pcie_pm_setup(pcie_port);
-+    pcie_bus_setup(pcie_port);
-+    pcie_device_setup(pcie_port);
-+    pcie_link_setup(pcie_port);
-+    pcie_error_setup(pcie_port);
-+    pcie_root_setup(pcie_port);
-+    pcie_vc_setup(pcie_port);
-+    pcie_port_logic_setup(pcie_port);
-+}
-+
-+static int 
-+ifx_pcie_wait_phy_link_up(int pcie_port)
-+{
-+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT  1000 /* XXX, tunable */
-+    int i;
-+
-+    /* Wait for PHY link is up */
-+    for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
-+        if (ifx_pcie_link_up(pcie_port)) {
-+            break;
-+        }
-+        udelay(100);
-+    }
-+    if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
-+        printk(KERN_ERR "%s timeout\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check data link up or not */
-+    if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+        printk(KERN_ERR "%s DLL link is still down\n", __func__);
-+        return -1;
-+    }
-+
-+    /* Check Data link active or not */
-+    if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+        printk(KERN_ERR "%s DLL is not active\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+#undef IFX_PCIE_PHY_LINK_UP_TIMEOUT
-+}
-+
-+static INLINE int
-+pcie_app_loigc_setup(int pcie_port)
-+{
-+#ifdef IFX_PCIE_PHY_DBG
-+    pcie_disable_scrambling(pcie_port);
-+#endif /* IFX_PCIE_PHY_DBG */
-+    pcie_ahb_bus_error_suppress(pcie_port);
-+
-+    /* Pull PCIe EP out of reset */
-+    pcie_device_rst_deassert(pcie_port);
-+
-+    /* Start LTSSM training between RC and EP */
-+    pcie_ltssm_enable(pcie_port);
-+
-+    /* Check PHY status after enabling LTSSM */
-+    if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+/* 
-+ * Must be done after ltssm due to based on negotiated link 
-+ * width and payload size
-+ * Update the Replay Time Limit. Empirically, some PCIe 
-+ * devices take a little longer to respond than expected under 
-+ * load. As a workaround for this we configure the Replay Time 
-+ * Limit to the value expected for a 512 byte MPS instead of 
-+ * our actual 128 byte MPS. The numbers below are directly 
-+ * from the PCIe spec table 3-4/5. 
-+ */ 
-+static INLINE void
-+pcie_replay_time_update(int pcie_port)
-+{
-+    u32 reg;
-+    int nlw;
-+    int rtl;
-+
-+    reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+    nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
-+    switch (nlw) {
-+        case PCIE_MAX_LENGTH_WIDTH_X1:
-+            rtl = 1677;
-+            break;
-+        case PCIE_MAX_LENGTH_WIDTH_X2:
-+            rtl = 867;
-+            break;
-+        case PCIE_MAX_LENGTH_WIDTH_X4:
-+            rtl = 462;
-+            break;
-+        case PCIE_MAX_LENGTH_WIDTH_X8:
-+            rtl = 258;
-+            break;
-+        default:
-+            rtl = 1677;
-+            break;
-+    }
-+    reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
-+    reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
-+    reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
-+    IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
-+}
-+
-+/*
-+ * Table 359 Enhanced Configuration Address Mapping1)
-+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
-+ * Memory Address PCI Express Configuration Space
-+ * A[(20+n-1):20] Bus Number 1 < n < 8
-+ * A[19:15] Device Number
-+ * A[14:12] Function Number
-+ * A[11:8] Extended Register Number
-+ * A[7:2] Register Number
-+ * A[1:0] Along with size of the access, used to generate Byte Enables
-+ * For VR9, only the address bits [22:0] are mapped to the configuration space:
-+ * . Address bits [22:20] select the target bus (1-of-8)1)
-+ * . Address bits [19:15] select the target device (1-of-32) on the bus
-+ * . Address bits [14:12] select the target function (1-of-8) within the device.
-+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
-+ * . Address bits [1:0] define the start byte location within the selected dword.
-+ */
-+static inline u32
-+pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-+{
-+    u32 addr;
-+    u8  bus;
-+
-+    if (!bus_num) {
-+        /* type 0 */
-+        addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
-+    } 
-+    else {
-+        bus = bus_num;
-+        /* type 1, only support 8 buses  */
-+        addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
-+                ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
-+    }
-+    IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
-+        __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
-+    return addr;
-+}
-+
-+static int 
-+pcie_valid_config(int pcie_port, int bus, int dev)
-+{
-+    /* RC itself */
-+    if ((bus == 0) && (dev == 0)) {
-+         return 1;
-+    }
-+
-+    /* No physical link */
-+    if (!ifx_pcie_link_up(pcie_port)) {
-+        return 0;
-+    }
-+
-+    /* Bus zero only has RC itself
-+     * XXX, check if EP will be integrated 
-+     */
-+    if ((bus == 0) && (dev != 0)) {
-+        return 0;
-+    }
-+
-+    /* Maximum 8 buses supported for VRX */
-+    if (bus > 9) {
-+        return 0;
-+    }
-+
-+    /* 
-+     * PCIe is PtP link, one bus only supports only one device 
-+     * except bus zero and PCIe switch which is virtual bus device
-+     * The following two conditions really depends on the system design
-+     * and attached the device.
-+     * XXX, how about more new switch
-+     */
-+    if ((bus == 1) && (dev != 0)) {
-+        return 0;
-+    }
-+
-+    if ((bus >= 3) && (dev != 0)) {
-+        return 0;
-+    }
-+    return 1;
-+}
-+
-+static INLINE u32 
-+ifx_pcie_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static INLINE void 
-+ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+    IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static INLINE u32 
-+ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg)
-+{
-+    return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static INLINE void 
-+ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val)
-+{
-+    IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+u32 
-+ifx_pcie_bus_enum_read_hack(int where, u32 value)
-+{
-+    u32 tvalue = value;
-+
-+    if (where == PCI_PRIMARY_BUS) {
-+        u8 primary, secondary, subordinate;
-+
-+        primary = tvalue & 0xFF;
-+        secondary = (tvalue >> 8) & 0xFF;
-+        subordinate = (tvalue >> 16) & 0xFF;
-+        primary += pcibios_1st_host_bus_nr();
-+        secondary += pcibios_1st_host_bus_nr();
-+        subordinate += pcibios_1st_host_bus_nr();
-+        tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+    }
-+    return tvalue;
-+}
-+
-+u32 
-+ifx_pcie_bus_enum_write_hack(int where, u32 value)
-+{
-+    u32 tvalue = value;
-+
-+    if (where == PCI_PRIMARY_BUS) {
-+        u8 primary, secondary, subordinate;
-+
-+        primary = tvalue & 0xFF;
-+        secondary = (tvalue >> 8) & 0xFF;
-+        subordinate = (tvalue >> 16) & 0xFF;
-+        if (primary > 0 && primary != 0xFF) {
-+            primary -= pcibios_1st_host_bus_nr();
-+        }
-+
-+        if (secondary > 0 && secondary != 0xFF) {
-+            secondary -= pcibios_1st_host_bus_nr();
-+        }
-+        if (subordinate > 0 && subordinate != 0xFF) {
-+            subordinate -= pcibios_1st_host_bus_nr();
-+        }
-+        tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16);
-+    }
-+    else if (where == PCI_SUBORDINATE_BUS) {
-+        u8 subordinate = tvalue & 0xFF;
-+
-+        subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
-+        tvalue = subordinate;
-+    }
-+    return tvalue;
-+}
-+
-+/** 
-+ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, 
-+ *                   int where, int size, u32 *value)
-+ * \brief Read a value from configuration space 
-+ * 
-+ * \param[in] bus    Pointer to pci bus
-+ * \param[in] devfn  PCI device function number
-+ * \param[in] where  PCI register number 
-+ * \param[in] size   Register read size
-+ * \param[out] value    Pointer to return value
-+ * \return  PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
-+ * \return  PCIBIOS_FUNC_NOT_SUPPORTED  PCI function not supported
-+ * \return  PCIBIOS_DEVICE_NOT_FOUND    PCI device not found
-+ * \return  PCIBIOS_SUCCESSFUL          OK
-+ * \ingroup IFX_PCIE_OS
-+ */ 
-+static int 
-+ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, 
-+                    int where, int size, u32 *value)
-+{
-+    u32 data = 0;
-+    int bus_number = bus->number;
-+    static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};    
-+    int ret = PCIBIOS_SUCCESSFUL;
-+    struct ifx_pci_controller *ctrl = bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    if (unlikely(size != 1 && size != 2 && size != 4)){
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* Make sure the address is aligned to natural boundary */
-+    if (unlikely(((size - 1) & where))) {
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+
-+    /* 
-+     * If we are second controller, we have to cheat OS so that it assume 
-+     * its bus number starts from 0 in host controller
-+     */
-+    bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+    /* 
-+     * We need to force the bus number to be zero on the root 
-+     * bus. Linux numbers the 2nd root bus to start after all 
-+     * busses on root 0. 
-+     */ 
-+    if (bus->parent == NULL) {
-+        bus_number = 0; 
-+    }
-+
-+    /* 
-+     * PCIe only has a single device connected to it. It is 
-+     * always device ID 0. Don't bother doing reads for other 
-+     * device IDs on the first segment. 
-+     */ 
-+    if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
-+        ret = PCIBIOS_FUNC_NOT_SUPPORTED;
-+        goto out; 
-+    }
-+
-+    if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+        *value = 0xffffffff;
-+        ret = PCIBIOS_DEVICE_NOT_FOUND;
-+        goto out;
-+    }
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
-+        PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-+
-+    PCIE_IRQ_LOCK(ifx_pcie_lock);
-+    if (bus_number == 0) { /* RC itself */
-+        u32 t;
-+
-+        t = (where & ~3);
-+        data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+        IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
-+            __func__, t, data);
-+    }
-+    else {
-+        u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+        data = ifx_pcie_cfg_rd(pcie_port, addr);
-+        if (pcie_port == IFX_PCIE_PORT0) {
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+            data = le32_to_cpu(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        }
-+        else {
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+            data = le32_to_cpu(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        } 
-+    }
-+    /* To get a correct PCI topology, we have to restore the bus number to OS */
-+    data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-+
-+    PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+    IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
-+        __func__, (data >> (8 * (where & 3))) & mask[size & 7], data); 
-+
-+    *value = (data >> (8 * (where & 3))) & mask[size & 7];
-+out:
-+    return ret;
-+}
-+
-+static u32 
-+ifx_pcie_size_to_value(int where, int size, u32 data, u32 value)
-+{
-+    u32 shift;
-+    u32 tdata = data;
-+
-+    switch (size) {
-+        case 1:
-+            shift = (where & 0x3) << 3;
-+            tdata &= ~(0xffU << shift);
-+            tdata |= ((value & 0xffU) << shift);
-+            break;
-+        case 2:
-+            shift = (where & 3) << 3;
-+            tdata &= ~(0xffffU << shift);
-+            tdata |= ((value & 0xffffU) << shift);
-+            break;
-+        case 4:
-+            tdata = value;
-+            break;
-+    }
-+    return tdata;
-+}
-+
-+/** 
-+ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
-+ *                 int where, int size, u32 value)
-+ * \brief Write a value to PCI configuration space 
-+ * 
-+ * \param[in] bus    Pointer to pci bus
-+ * \param[in] devfn  PCI device function number
-+ * \param[in] where  PCI register number 
-+ * \param[in] size   The register size to be written
-+ * \param[in] value  The valule to be written
-+ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
-+ * \return PCIBIOS_DEVICE_NOT_FOUND    PCI device not found
-+ * \return PCIBIOS_SUCCESSFUL          OK
-+ * \ingroup IFX_PCIE_OS
-+ */ 
-+static int 
-+ifx_pcie_write_config(struct pci_bus *bus, u32 devfn,
-+                  int where, int size, u32 value)
-+{
-+    int bus_number = bus->number;
-+    int ret = PCIBIOS_SUCCESSFUL;
-+    struct ifx_pci_controller *ctrl = bus->sysdata;
-+    int pcie_port = ctrl->port;
-+    u32 tvalue = value;
-+    u32 data;
-+
-+    /* Make sure the address is aligned to natural boundary */
-+    if (unlikely(((size - 1) & where))) {
-+        ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+        goto out;
-+    }
-+    /* 
-+     * If we are second controller, we have to cheat OS so that it assume 
-+     * its bus number starts from 0 in host controller
-+     */
-+    bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+    /* 
-+     * We need to force the bus number to be zero on the root 
-+     * bus. Linux numbers the 2nd root bus to start after all 
-+     * busses on root 0. 
-+     */ 
-+    if (bus->parent == NULL) {
-+        bus_number = 0; 
-+    }
-+
-+    if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+        ret = PCIBIOS_DEVICE_NOT_FOUND;
-+        goto out;
-+    }
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__, 
-+        bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
-+
-+    /* XXX, some PCIe device may need some delay */
-+    PCIE_IRQ_LOCK(ifx_pcie_lock);
-+
-+    /* 
-+     * To configure the correct bus topology using native way, we have to cheat Os so that
-+     * it can configure the PCIe hardware correctly.
-+     */
-+    tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-+
-+    if (bus_number == 0) { /* RC itself */
-+        u32 t;
-+
-+        t = (where & ~3);
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
-+        data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
-+
-+        data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
-+        ifx_pcie_rc_cfg_wr(pcie_port, t, data);     
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n", 
-+            __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
-+    }
-+    else {
-+        u32 addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
-+        data = ifx_pcie_cfg_rd(pcie_port, addr);
-+        if (pcie_port == IFX_PCIE_PORT0) {
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+            data = le32_to_cpu(data);    
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        }
-+        else {
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+            data = le32_to_cpu(data);    
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        }
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
-+
-+        data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+        if (pcie_port == IFX_PCIE_PORT0) {
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+            data = cpu_to_le32(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        }
-+        else {
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+            data = cpu_to_le32(data);
-+    #endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+        }
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
-+        ifx_pcie_cfg_wr(pcie_port, addr, data);
-+        IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n", 
-+            __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
-+    }
-+    PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+out:
-+    return ret;
-+}
-+
-+static struct resource ifx_pcie_io_resource = {
-+    .name   = "PCIe0 I/O space",
-+    .start  = PCIE_IO_PHY_BASE,
-+    .end    = PCIE_IO_PHY_END,
-+    .flags  = IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie_mem_resource = {
-+    .name   = "PCIe0 Memory space",
-+    .start  = PCIE_MEM_PHY_BASE,
-+    .end    = PCIE_MEM_PHY_END,
-+    .flags  = IORESOURCE_MEM,
-+};
-+
-+static struct pci_ops ifx_pcie_ops = {
-+    .read  = ifx_pcie_read_config,
-+    .write = ifx_pcie_write_config,
-+};
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+static struct resource ifx_pcie1_io_resource = {
-+    .name   = "PCIe1 I/O space",
-+    .start  = PCIE1_IO_PHY_BASE,
-+    .end    = PCIE1_IO_PHY_END,
-+    .flags  = IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie1_mem_resource = {
-+    .name   = "PCIe1 Memory space",
-+    .start  = PCIE1_MEM_PHY_BASE,
-+    .end    = PCIE1_MEM_PHY_END,
-+    .flags  = IORESOURCE_MEM,
-+};
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+
-+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
-+    {
-+        .pcic = {
-+            .pci_ops      = &ifx_pcie_ops,
-+            .mem_resource = &ifx_pcie_mem_resource,
-+            .io_resource  = &ifx_pcie_io_resource,
-+         },
-+         .port = IFX_PCIE_PORT0,
-+    },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    {
-+         .pcic = {
-+            .pci_ops      = &ifx_pcie_ops,
-+            .mem_resource = &ifx_pcie1_mem_resource,
-+            .io_resource  = &ifx_pcie1_io_resource,
-+         },
-+         .port = IFX_PCIE_PORT1,
-+    },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+#ifdef IFX_PCIE_ERROR_INT
-+static INLINE void 
-+pcie_core_int_clear_all(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_ISR, "%s PCIE_IRNCR: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
-+    reg &= PCIE_RC_CORE_COMBINED_INT;
-+    IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-+}
-+
-+static irqreturn_t
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
-+pcie_rc_core_isr(int irq, void *dev_id)
-+#else
-+pcie_rc_core_isr(int irq, void *dev_id, struct pt_regs *regs)
-+#endif
-+{
-+    struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
-+    int pcie_port = ctrl->port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
-+    pcie_core_int_clear_all(pcie_port);
-+    return IRQ_HANDLED;
-+}
-+
-+static int
-+pcie_rc_core_int_init(int pcie_port)
-+{
-+    int ret;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
-+
-+    /* Enable core interrupt */
-+    IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNEN: 0x%08x\n", 
-+        __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port)));
-+
-+    /* Clear it first */
-+    IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_IRNCR: 0x%08x\n",
-+        __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
-+    ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
-+                pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
-+    if (ret) {
-+        printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-+    }
-+    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__);
-+
-+    return ret;
-+}
-+#endif /* IFX_PCIE_ERROR_INT */
-+
-+/** 
-+ * \fn int ifx_pcie_bios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+ * \brief Map a PCI device to the appropriate interrupt line 
-+ * 
-+ * \param[in] dev    The Linux PCI device structure for the device to map 
-+ * \param[in] slot   The slot number for this device on __BUS 0__. Linux 
-+ *                   enumerates through all the bridges and figures out the 
-+ *                   slot on Bus 0 where this device eventually hooks to. 
-+ * \param[in] pin    The PCI interrupt pin read from the device, then swizzled 
-+ *                   as it goes through each bridge. 
-+ * \return Interrupt number for the device
-+ * \ingroup IFX_PCIE_OS
-+ */ 
-+int 
-+ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+    u32 irq_bit = 0;
-+    int irq = 0;
-+    struct ifx_pci_controller *ctrl = dev->bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-+
-+    if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
-+        printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
-+        return -1;
-+    }
-+    /* Pin index so minus one */
-+    irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
-+    irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
-+    IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
-+//	printk("%s PCIE_IRNEN: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNEN(pcie_port)));
-+    IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
-+  //  printk("%s PCIE_IRNCR: 0x%08x\n", __func__, IFX_REG_R32(PCIE_IRNCR(pcie_port)));
-+    printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
-+//    printk("%s dev %s: exit\n", __func__, pci_name(dev));
-+    return irq;
-+}
-+
-+/** 
-+ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+ * \brief Called to perform platform specific PCI setup 
-+ * 
-+ * \param[in] dev The Linux PCI device structure for the device to map
-+ * \return OK
-+ * \ingroup IFX_PCIE_OS
-+ */ 
-+int 
-+ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+{
-+    u16 config;
-+#ifdef IFX_PCIE_ERROR_INT
-+    u32 dconfig; 
-+    int pos;
-+#endif /* IFX_PCIE_ERROR_INT */
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
-+    /* Enable reporting System errors and parity errors on all devices */ 
-+    /* Enable parity checking and error reporting */ 
-+    pci_read_config_word(dev, PCI_COMMAND, &config);
-+    config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
-+          PCI_COMMAND_FAST_BACK*/;
-+    pci_write_config_word(dev, PCI_COMMAND, config);
-+
-+    if (dev->subordinate) {
-+        /* Set latency timers on sub bridges */
-+        pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
-+        /* More bridge error detection */
-+        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-+        config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-+        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-+    }
-+#ifdef IFX_PCIE_ERROR_INT
-+    /* Enable the PCIe normal error reporting */
-+    pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-+    if (pos) {
-+
-+        /* Disable system error generation in response to error messages */
-+        pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
-+        config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
-+        pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-+
-+        /* Clear PCIE Capability's Device Status */
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-+
-+        /* Update Device Control */ 
-+        pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-+        /* Correctable Error Reporting */
-+        config |= PCI_EXP_DEVCTL_CERE;
-+        /* Non-Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_NFERE;
-+        /* Fatal Error Reporting */
-+        config |= PCI_EXP_DEVCTL_FERE;
-+        /* Unsupported Request */
-+        config |= PCI_EXP_DEVCTL_URRE;
-+        pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-+    }
-+
-+    /* Find the Advanced Error Reporting capability */
-+    pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-+    if (pos) {
-+        /* Clear Uncorrectable Error Status */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
-+        /* Enable reporting of all uncorrectable errors */
-+        /* Uncorrectable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-+        /* 
-+        * Leave severity at HW default. This only controls if 
-+        * errors are reported as uncorrectable or 
-+        * correctable, not if the error is reported. 
-+        */ 
-+        /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-+        /* Clear Correctable Error Status */
-+        pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-+        /* Enable reporting of all correctable errors */
-+        /* Correctable Error Mask - turned on bits disable errors */
-+        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-+        /* Advanced Error Capabilities */ 
-+        pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-+        /* ECRC Generation Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_GENC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_GENE;
-+        }
-+        /* ECRC Check Enable */
-+        if (dconfig & PCI_ERR_CAP_ECRC_CHKC) {
-+            dconfig |= PCI_ERR_CAP_ECRC_CHKE;
-+        }
-+        pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-+
-+        /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-+        /* Enable Root Port's interrupt in response to error messages */
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-+              PCI_ERR_ROOT_CMD_COR_EN |
-+              PCI_ERR_ROOT_CMD_NONFATAL_EN |
-+              PCI_ERR_ROOT_CMD_FATAL_EN); 
-+        /* Clear the Root status register */
-+        pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-+        pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-+    }
-+#endif /* IFX_PCIE_ERROR_INT */
-+    /* WAR, only 128 MRRS is supported, force all EPs to support this value */
-+    pcie_set_readrq(dev, 128);
-+    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s exit \n", __func__);
-+    return 0;
-+}
-+
-+static void
-+pcie_phy_rst(int pcie_port)
-+{
-+     pcie_phy_rst_assert(pcie_port);
-+     pcie_phy_rst_deassert(pcie_port);
-+
-+     /* Make sure PHY PLL is stable */
-+     udelay(20);
-+}
-+
-+static int
-+pcie_rc_initialize(int pcie_port)
-+{
-+    int i;
-+#define IFX_PCIE_PHY_LOOP_CNT  5
-+
-+    pcie_rcu_endian_setup(pcie_port);
-+
-+    pcie_ep_gpio_rst_init(pcie_port);
-+
-+    /* 
-+     * XXX, PCIe elastic buffer bug will cause not to be detected. One more 
-+     * reset PCIe PHY will solve this issue 
-+     */
-+    for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
-+        /* Disable PCIe PHY Analog part for sanity check */
-+	pcie_phy_pmu_disable(pcie_port);
-+
-+	pcie_phy_rst(pcie_port);
-+
-+        /* PCIe Core reset enabled, low active, sw programmed */
-+	pcie_core_rst_assert(pcie_port);
-+
-+        /* Put PCIe EP in reset status */
-+	pcie_device_rst_assert(pcie_port);
-+
-+        /* PCI PHY & Core reset disabled, high active, sw programmed */
-+	pcie_core_rst_deassert(pcie_port);
-+
-+        /* Already in a quiet state, program PLL, enable PHY, check ready bit */
-+	pcie_phy_clock_mode_setup(pcie_port);
-+
-+        /* Enable PCIe PHY and Clock */
-+	pcie_core_pmu_setup(pcie_port);
-+
-+	/* Clear status registers */
-+        pcie_status_register_clear(pcie_port);
-+
-+    #ifdef CONFIG_PCI_MSI
-+        pcie_msi_init(pcie_port);
-+    #endif /* CONFIG_PCI_MSI */
-+	pcie_rc_cfg_reg_setup(pcie_port);
-+
-+	/* Once link is up, break out */
-+        if (pcie_app_loigc_setup(pcie_port) == 0) {
-+	    break;
-+        }
-+    }
-+    if (i >= IFX_PCIE_PHY_LOOP_CNT) {
-+        printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-+        return -EIO;
-+    }
-+    /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
-+    pcie_replay_time_update(pcie_port);
-+#ifdef IFX_PCIE_DBG
-+    pcie_post_dump(pcie_port);
-+    pcie_status_registers_dump(pcie_port);
-+#endif /* IFX_PCIE_DBG */
-+    return 0;
-+}
-+
-+static int inline
-+ifx_pcie_startup_port_nr(void)
-+{
-+    int pcie_port = IFX_PCIE_PORT0;
-+
-+#if defined (CONFIG_IFX_PCIE_1ST_CORE) && defined (CONFIG_IFX_PCIE_2ND_CORE)
-+    pcie_port = IFX_PCIE_PORT0;
-+#elif defined (CONFIG_IFX_PCIE_1ST_CORE)
-+    pcie_port = IFX_PCIE_PORT0;
-+#elif defined (CONFIG_IFX_PCIE_2ND_CORE)
-+    pcie_port = IFX_PCIE_PORT1;
-+#else
-+    #error "Please choose valid PCIe Core"
-+#endif
-+    return pcie_port;
-+}
-+
-+/** 
-+ * \fn static int __init ifx_pcie_bios_init(void)
-+ * \brief Initialize the IFX PCIe controllers
-+ *
-+ * \return -EIO    PCIe PHY link is not up
-+ * \return -ENOMEM Configuration/IO space failed to map
-+ * \return 0       OK
-+ * \ingroup IFX_PCIE_OS
-+ */ 
-+extern int (*ltq_pci_plat_arch_init)(struct pci_dev *dev);
-+extern int (*ltq_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
-+
-+static int __init 
-+ifx_pcie_bios_init(void)
-+{
-+    char ver_str[128] = {0};
-+    void __iomem *io_map_base;
-+    int pcie_port;
-+    int startup_port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s enter \n", __func__);
-+
-+	ltq_pci_map_irq = ifx_pcie_bios_map_irq;
-+	ltq_pci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
-+
-+    /* Enable AHB Master/ Slave */
-+    pcie_ahb_pmu_setup();
-+
-+    startup_port = ifx_pcie_startup_port_nr();
-+    
-+    for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
-+	if (pcie_rc_initialize(pcie_port) == 0) {
-+	    IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", 
-+                 __func__, PCIE_CFG_PORT_TO_BASE(pcie_port));
-+            /* Otherwise, warning will pop up */
-+            io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
-+            if (io_map_base == NULL) {
-+                IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__);
-+                return -ENOMEM;
-+            }
-+            ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+
-+            register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-+            /* XXX, clear error status */
-+
-+            IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", 
-+                              __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, 
-+                              &ifx_pcie_controller[pcie_port].pcic.io_resource);
-+
-+        #ifdef IFX_PCIE_ERROR_INT
-+            pcie_rc_core_int_init(pcie_port);
-+        #endif /* IFX_PCIE_ERROR_INT */
-+        }
-+    }
-+#ifdef CONFIG_IFX_PMCU
-+    ifx_pcie_pmcu_init();
-+#endif /* CONFIG_IFX_PMCU */
-+
-+    sprintf(ver_str, "PCIe Root Complex %d.%d.%d", IFX_PCIE_VER_MAJOR, IFX_PCIE_VER_MID, IFX_PCIE_VER_MINOR);
-+    printk(KERN_INFO "%s", ver_str);
-+    return 0;
-+#undef IFX_PCIE_PHY_LOOP_CNT
-+}
-+arch_initcall(ifx_pcie_bios_init);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
-+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie.h
-@@ -0,0 +1,135 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_H
-+#define IFXMIPS_PCIE_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include "ifxmips_pci_common.h"
-+#include "ifxmips_pcie_reg.h"
-+
-+/*!
-+ \defgroup IFX_PCIE  PCI Express bus driver module   
-+ \brief  PCI Express IP module support VRX200 
-+*/
-+
-+/*!
-+ \defgroup IFX_PCIE_OS OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module common header file
-+*/
-+#define PCIE_IRQ_LOCK(lock) do {             \
-+    unsigned long flags;                     \
-+    spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock)                \
-+    spin_unlock_irqrestore(&(lock), flags);  \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI        0x00000001
-+#define PCIE_MSG_ISR        0x00000002
-+#define PCIE_MSG_FIXUP      0x00000004
-+#define PCIE_MSG_READ_CFG   0x00000008
-+#define PCIE_MSG_WRITE_CFG  0x00000010
-+#define PCIE_MSG_CFG        (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG        0x00000020
-+#define PCIE_MSG_INIT       0x00000040
-+#define PCIE_MSG_ERR        0x00000080
-+#define PCIE_MSG_PHY        0x00000100
-+#define PCIE_MSG_ANY        0x000001ff
-+
-+#define IFX_PCIE_PORT0      0
-+#define IFX_PCIE_PORT1      1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR    2
-+#else
-+#define IFX_PCIE_CORE_NR    1
-+#endif
-+
-+#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do {   \
-+        ifx_pcie_debug((_fmt), ##args);          \
-+} while (0)
-+
-+#define INLINE 
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...)   \
-+    do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+	struct pci_controller   pcic;
-+    
-+	/* RC specific, per host bus information */
-+	u32   port;  /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+    const unsigned int irq;
-+    const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+    const u32 irq_bit;
-+    const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+    ifx_pcie_ir_irq_t ir_irq;
-+    ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+#define CONFIG_VR9
-+
-+#ifdef CONFIG_VR9
-+#include "ifxmips_pcie_vr9.h"
-+#elif defined (CONFIG_AR10)
-+#include "ifxmips_pcie_ar10.h"
-+#else
-+#error "PCIE: platform not defined"
-+#endif /* CONFIG_VR9 */
-+
-+#endif  /* IFXMIPS_PCIE_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_ar10.h
-@@ -0,0 +1,290 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_ar10.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver ar10 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_AR10_H
-+#define IFXMIPS_PCIE_AR10_H
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+/* Project header file */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_pmu.h>
-+#include <asm/ifx/ifx_gpio.h>
-+#include <asm/ifx/ifx_ebu_led.h>
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+    ifx_ebu_led_enable();
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);        
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);  
-+    }
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+    /* XXX, moved to CGU to control AHBM */
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Inbound, big endian */
-+    reg |= IFX_RCU_BE_AHB4S;
-+    if (pcie_port == 0) {
-+        reg |= IFX_RCU_BE_PCIE0M;
-+
-+    #ifdef CONFIG_IFX_PCIE_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE0S;
-+    #endif
-+    }
-+    else {
-+        reg |= IFX_RCU_BE_PCIE1M;
-+    #ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+        /* Outbound, software swap needed */
-+        reg |= IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #else
-+        /* Outbound little endian  */
-+        reg &= ~IFX_RCU_BE_AHB3M;
-+        reg &= ~IFX_RCU_BE_PCIE1S;
-+    #endif
-+    }
-+
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+    if (pcie_port == 0) { /* XXX, should use macro*/
-+        PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+    else {
-+        PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+    }
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    if (pcie_port == 0) {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE0_PDI;
-+    }
-+    else {
-+        /* Config AHB->PCIe and PDI endianness */
-+        reg |= IFX_RCU_BE_PCIE1_PDI;
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        /* Enable PDI to access PCIe PHY register */
-+        PDI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PDI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset Core, bit 22 */
-+    if (pcie_port == 0) {
-+        reg |= 0x00400000;
-+    }
-+    else {
-+        reg |= 0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00400000; /* bit 22 */
-+    }
-+    else {
-+        reg &= ~0x08000000; /* Bit 27 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg |= 0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg |= 0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    if (pcie_port == 0) {
-+        reg &= ~0x00001000; /* Bit 12 */
-+    }
-+    else {
-+        reg &= ~0x00002000; /* Bit 13 */
-+    }
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 0);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 0);
-+    }
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+    if (pcie_port == 0) {
-+        ifx_ebu_led_set_data(11, 1);
-+    }
-+    else {
-+        ifx_ebu_led_set_data(12, 1);
-+    }
-+    ifx_ebu_led_disable();
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+    if (pcie_port == 0) {
-+        PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); 
-+    }
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+    pcie_msi_pic_init(pcie_port);
-+    if (pcie_port == 0) {
-+        MSI0_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+    else {
-+        MSI1_PMU_SETUP(IFX_PMU_ENABLE);
-+    }
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+        if (pcibios_host_nr() > 1) {
-+            tbus_number -= pcibios_1st_host_bus_nr();
-+        }        
-+    }
-+#endif /* CONFIG_IFX_PCI */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+            }
-+        }
-+    #endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_IFX_PCIE_2ND_CORE
-+        if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */
-+            if (pcibios_host_nr() > 1) {
-+                tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+            }
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_AR10_H */
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_msi.c
-@@ -0,0 +1,392 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_msi.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCI MSI sub module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe MSI Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 02 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_MSI MSI OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_msi.c
-+ \ingroup IFX_PCIE 
-+ \brief PCIe MSI OS interface file
-+*/
-+
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/pci.h>
-+#include <linux/msi.h>
-+#include <linux/module.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/irq.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+#define IFX_MSI_IRQ_NUM    16
-+
-+enum {
-+    IFX_PCIE_MSI_IDX0 = 0,
-+    IFX_PCIE_MSI_IDX1,
-+    IFX_PCIE_MSI_IDX2,
-+    IFX_PCIE_MSI_IDX3,
-+};
-+
-+typedef struct ifx_msi_irq_idx {
-+    const int irq;
-+    const int idx;
-+}ifx_msi_irq_idx_t;
-+
-+struct ifx_msi_pic {
-+    volatile u32  pic_table[IFX_MSI_IRQ_NUM];
-+    volatile u32  pic_endian;    /* 0x40  */
-+};
-+typedef struct ifx_msi_pic *ifx_msi_pic_t;
-+
-+typedef struct ifx_msi_irq {
-+    const volatile ifx_msi_pic_t msi_pic_p;
-+    const u32 msi_phy_base;
-+    const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
-+    /*
-+     * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is 
-+     * in use.
-+     */
-+    u16 msi_free_irq_bitmask;
-+
-+    /*
-+     * Each bit in msi_multiple_irq_bitmask tells that the device using 
-+     * this bit in msi_free_irq_bitmask is also using the next bit. This 
-+     * is used so we can disable all of the MSI interrupts when a device 
-+     * uses multiple.
-+     */
-+    u16 msi_multiple_irq_bitmask;
-+}ifx_msi_irq_t;
-+
-+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
-+        .msi_phy_base = PCIE_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+    },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    {
-+        .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
-+        .msi_phy_base = PCIE1_MSI_PHY_BASE,
-+        .msi_irq_idx = {
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+            {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+            {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+        },
-+        .msi_free_irq_bitmask = 0,
-+        .msi_multiple_irq_bitmask= 0,
-+
-+    },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+/* 
-+ * This lock controls updates to msi_free_irq_bitmask, 
-+ * msi_multiple_irq_bitmask and pic register settting
-+ */ 
-+static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-+
-+void pcie_msi_pic_init(int pcie_port)
-+{
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+}
-+
-+/** 
-+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+ * \brief Called when a driver request MSI interrupts instead of the 
-+ * legacy INT A-D. This routine will allocate multiple interrupts 
-+ * for MSI devices that support them. A device can override this by 
-+ * programming the MSI control bits [6:4] before calling 
-+ * pci_enable_msi(). 
-+ * 
-+ * \param[in] pdev   Device requesting MSI interrupts 
-+ * \param[in] desc   MSI descriptor 
-+ * 
-+ * \return   -EINVAL Invalid pcie root port or invalid msi bit
-+ * \return    0        OK
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+int 
-+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+{
-+    int  irq, pos;
-+    u16  control;
-+    int  irq_idx;
-+    int  irq_step;
-+    int configured_private_bits;
-+    int request_private_bits;
-+    struct msi_msg msg;
-+    u16 search_mask;
-+    struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
-+    int pcie_port = ctrl->port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-+
-+    /* XXX, skip RC MSI itself */
-+    if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
-+        IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
-+        return -EINVAL;
-+    }
-+
-+    /*
-+     * Read the MSI config to figure out how many IRQs this device 
-+     * wants.  Most devices only want 1, which will give 
-+     * configured_private_bits and request_private_bits equal 0. 
-+     */
-+    pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-+
-+    /*
-+     * If the number of private bits has been configured then use 
-+     * that value instead of the requested number. This gives the 
-+     * driver the chance to override the number of interrupts 
-+     * before calling pci_enable_msi(). 
-+     */
-+    configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; 
-+    if (configured_private_bits == 0) {
-+        /* Nothing is configured, so use the hardware requested size */
-+        request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-+    }
-+    else {
-+        /*
-+         * Use the number of configured bits, assuming the 
-+         * driver wanted to override the hardware request 
-+         * value.
-+         */
-+        request_private_bits = configured_private_bits;
-+    }
-+
-+    /*
-+     * The PCI 2.3 spec mandates that there are at most 32
-+     * interrupts. If this device asks for more, only give it one.
-+     */
-+    if (request_private_bits > 5) {
-+        request_private_bits = 0;
-+    }
-+again:
-+    /*
-+     * The IRQs have to be aligned on a power of two based on the
-+     * number being requested.
-+     */
-+    irq_step = (1 << request_private_bits);
-+
-+    /* Mask with one bit for each IRQ */
-+    search_mask = (1 << irq_step) - 1;
-+
-+    /*
-+     * We're going to search msi_free_irq_bitmask_lock for zero 
-+     * bits. This represents an MSI interrupt number that isn't in 
-+     * use.
-+     */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
-+        if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
-+            msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; 
-+            msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
-+            break; 
-+        }
-+    }
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+
-+    /* Make sure the search for available interrupts didn't fail */ 
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        if (request_private_bits) {
-+            IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
-+                  "interrupts, trying just one", __func__, 1 << request_private_bits);
-+            request_private_bits = 0;
-+            goto again;
-+        }
-+        else {
-+            printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
-+            return -EINVAL;
-+        }
-+    } 
-+    irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
-+    irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-+
-+    /*
-+     * Initialize MSI. This has to match the memory-write endianess from the device 
-+     * Address bits [23:12]
-+     */
-+    spin_lock(&ifx_pcie_msi_lock); 
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
-+                    SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
-+                    SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+
-+    /* Enable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
-+    spin_unlock(&ifx_pcie_msi_lock);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
-+        pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-+
-+    /* Update the number of IRQs the device has available to it */
-+    control &= ~PCI_MSI_FLAGS_QSIZE;
-+    control |= (request_private_bits << 4);
-+    pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-+
-+    set_irq_msi(irq, desc);
-+    msg.address_hi = 0x0;
-+    msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
-+    msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-+
-+    write_msi_msg(irq, &msg);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+    return 0;
-+}
-+
-+static int
-+pcie_msi_irq_to_port(unsigned int irq, int *port)
-+{
-+    int ret = 0;
-+
-+    if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
-+        irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
-+        *port = IFX_PCIE_PORT0;
-+    }
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+    else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
-+        irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
-+        *port = IFX_PCIE_PORT1;
-+    }
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+    else {
-+        printk(KERN_ERR "%s: Attempted to teardown illegal " 
-+            "MSI interrupt (%d)\n", __func__, irq);
-+        ret = -EINVAL;
-+    }
-+    return ret;
-+}
-+
-+/** 
-+ * \fn void arch_teardown_msi_irq(unsigned int irq)
-+ * \brief Called when a device no longer needs its MSI interrupts. All 
-+ * MSI interrupts for the device are freed. 
-+ * 
-+ * \param irq   The devices first irq number. There may be multple in sequence.
-+ * \return none
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+void 
-+arch_teardown_msi_irq(unsigned int irq)
-+{
-+    int pos;
-+    int number_irqs; 
-+    u16 bitmask;
-+    int pcie_port;
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-+
-+    BUG_ON(irq > INT_NUM_IM4_IRL31);
-+
-+    if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
-+        return;
-+    }
-+
-+    /* Shift the mask to the correct bit location, not always correct 
-+     * Probally, the first match will be chosen.
-+     */
-+    for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
-+        if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) 
-+            && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
-+            break;
-+        }
-+    }
-+    if (pos >= IFX_MSI_IRQ_NUM) {
-+        printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
-+        return;
-+    }
-+    spin_lock(&ifx_pcie_msi_lock);
-+    /* Disable this entry */
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
-+    msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
-+    spin_unlock(&ifx_pcie_msi_lock); 
-+    /*
-+     * Count the number of IRQs we need to free by looking at the
-+     * msi_multiple_irq_bitmask. Each bit set means that the next
-+     * IRQ is also owned by this device.
-+     */ 
-+    number_irqs = 0; 
-+    while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && 
-+        (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
-+        number_irqs++;
-+    }
-+    number_irqs++;
-+
-+    /* Mask with one bit for each IRQ */
-+    bitmask = (1 << number_irqs) - 1;
-+
-+    bitmask <<= pos;
-+    if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
-+        printk(KERN_ERR "%s: Attempted to teardown MSI "
-+             "interrupt (%d) not in use\n", __func__, irq);
-+        return;
-+    }
-+    /* Checks are done, update the in use bitmask */
-+    spin_lock(&ifx_pcie_msi_lock);
-+    msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
-+    msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
-+    spin_unlock(&ifx_pcie_msi_lock);
-+    IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_phy.c
-@@ -0,0 +1,478 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_phy.c
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe PHY sub module
-+**
-+** DATE         : 14 May 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    14 May,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_phy.c
-+ \ingroup IFX_PCIE  
-+ \brief PCIe PHY PLL register programming source file
-+*/
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/paccess.h>
-+#include <linux/delay.h>
-+
-+#include "ifxmips_pcie_reg.h"
-+#include "ifxmips_pcie.h"
-+
-+/* PCIe PDI only supports 16 bit operation */
-+
-+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
-+    ((*(volatile u16 *) (__addr)) = (__data))
-+    
-+#define IFX_PCIE_PHY_REG_READ16(__addr)  \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG16(__addr)   \
-+    (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
-+    u16 read_data;                                    \
-+    u16 write_data;                                   \
-+    read_data = IFX_PCIE_PHY_REG_READ16((__reg));      \
-+    write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
-+    IFX_PCIE_PHY_REG_WRITE16((__reg), write_data);               \
-+} while (0)
-+
-+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-+
-+//#define IFX_PCI_PHY_REG_DUMP
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+static void
-+pcie_phy_reg_dump(int pcie_port) 
-+{
-+    printk("PLL REGFILE\n");
-+    printk("PCIE_PHY_PLL_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL4    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL5    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL6    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port)));
-+    printk("PCIE_PHY_PLL_CTRL7    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_PLL_A_CTRL3  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_PLL_STATUS   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)));
-+
-+    printk("TX1 REGFILE\n");
-+    printk("PCIE_PHY_TX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_CTRL3    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX1_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX1_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port)));
-+
-+    printk("TX2 REGFILE\n");
-+    printk("PCIE_PHY_TX2_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL1  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_TX2_A_CTRL2  0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD1     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD2     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port)));
-+    printk("PCIE_PHY_TX2_MOD3     0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port)));
-+
-+    printk("RX1 REGFILE\n");
-+    printk("PCIE_PHY_RX1_CTRL1    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port)));
-+    printk("PCIE_PHY_RX1_CTRL2    0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port)));
-+    printk("PCIE_PHY_RX1_CDR      0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port)));
-+    printk("PCIE_PHY_RX1_EI       0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port)));
-+    printk("PCIE_PHY_RX1_A_CTRL   0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port)));
-+}
-+#endif /* IFX_PCI_PHY_REG_DUMP */
-+
-+static void
-+pcie_phy_comm_setup(int pcie_port)
-+{
-+   /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* Improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* Reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+}
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+static void 
-+pcie_phy_36mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-+static void 
-+pcie_phy_36mhz_ssc_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+
-+    /* PLL Setting */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+    /* Increase the bias reference voltage */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+    /* Endcnt */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+    /* Force */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+    /* Predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+    /* ctrl_lim */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+    /* ctrl */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+    /* predrv_ser_en */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+    /* RTERM*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-+
-+    /* improved 100MHz clock output  */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+    /* reduced CDR BW to avoid glitches */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+    
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-+static void 
-+pcie_phy_25mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* pll_ensdm */    
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-+
-+    /* en_ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-+static void 
-+pcie_phy_100mhz_mode_setup(int pcie_port) 
-+{
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif 
-+    /* en_ext_mmd_div_ratio */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+    /* ext_mmd_div_ratio*/
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+    /* pll_ensdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+    /* en_const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+    /* mmd */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+    /* lf_mode */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+    /* const_sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+    /* const sdm */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+    /* pllmod */
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-+
-+static int
-+pcie_phy_wait_startup_ready(int pcie_port)
-+{
-+    int i;
-+
-+    for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
-+        if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
-+            break;
-+        }
-+        udelay(10);
-+    }
-+    if (i >= IFX_PCIE_PLL_TIMEOUT) {
-+        printk(KERN_ERR "%s PLL Link timeout\n", __func__);
-+        return -1;
-+    }
-+    return 0;
-+}
-+
-+static void 
-+pcie_phy_load_enable(int pcie_port, int slice) 
-+{
-+    /* Set the load_en of tx/rx slice to '1' */
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
-+            break;
-+        case 3:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_disable(int pcie_port, int slice) 
-+{ 
-+    /* set the load_en of tx/rx slice to '0' */ 
-+    switch (slice) {
-+        case 1:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 2:
-+            IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
-+            break;
-+        case 3: 
-+            IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
-+            break;
-+    }
-+}
-+
-+static void 
-+pcie_phy_load_war(int pcie_port)
-+{
-+    int slice;
-+
-+    for (slice = 1; slice < 4; slice++) {
-+        pcie_phy_load_enable(pcie_port, slice);
-+        udelay(1);
-+        pcie_phy_load_disable(pcie_port, slice);
-+    }
-+}
-+
-+static void 
-+pcie_phy_tx2_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void 
-+pcie_phy_tx1_modulation(int pcie_port)
-+{
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
-+    mdelay(1);
-+    IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void
-+pcie_phy_tx_modulation_war(int pcie_port)
-+{
-+    int i;
-+
-+#define PCIE_PHY_MODULATION_NUM 5 
-+    for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
-+        pcie_phy_tx2_modulation(pcie_port);
-+        pcie_phy_tx1_modulation(pcie_port);
-+    }
-+#undef PCIE_PHY_MODULATION_NUM
-+}
-+
-+void
-+pcie_phy_clock_mode_setup(int pcie_port)
-+{
-+    pcie_pdi_big_endian(pcie_port);
-+
-+    /* Enable PDI to access PCIe PHY register */
-+    pcie_pdi_pmu_enable(pcie_port);
-+
-+    /* Configure PLL and PHY clock */
-+    pcie_phy_comm_setup(pcie_port);
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+    pcie_phy_36mhz_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
-+    pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
-+    pcie_phy_25mhz_mode_setup(pcie_port);
-+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
-+    pcie_phy_100mhz_mode_setup(pcie_port);
-+#else
-+    #error "PCIE PHY Clock Mode must be chosen first!!!!"
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+    /* Enable PCIe PHY and make PLL setting take effect */
-+    pcie_phy_pmu_enable(pcie_port);
-+
-+    /* Check if we are in startup_ready status */
-+    pcie_phy_wait_startup_ready(pcie_port);
-+
-+    pcie_phy_load_war(pcie_port);
-+
-+    /* Apply TX modulation workarounds */
-+    pcie_phy_tx_modulation_war(pcie_port);
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+    IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
-+    pcie_phy_reg_dump(pcie_port);
-+#endif
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.c
-@@ -0,0 +1,176 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.c
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIE Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIE Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+  \defgroup IFX_PCIE_PM Power Management functions
-+  \ingroup IFX_PCIE
-+  \brief IFX PCIE Root Complex Driver power management functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_pm.c
-+ \ingroup IFX_PCIE    
-+ \brief source file for PCIE Root Complex Driver Power Management
-+*/
-+
-+#ifndef EXPORT_SYMTAB
-+#define EXPORT_SYMTAB
-+#endif
-+#ifndef AUTOCONF_INCLUDED
-+#include <linux/config.h>
-+#endif /* AUTOCONF_INCLUDED */
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/system.h>
-+
-+/* Project header */
-+#include <asm/ifx/ifx_types.h>
-+#include <asm/ifx/ifx_regs.h>
-+#include <asm/ifx/common_routines.h>
-+#include <asm/ifx/ifx_pmcu.h>
-+#include "ifxmips_pcie_pm.h"
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+ * \brief the callback function to request pmcu state in the power management hardware-dependent module
-+ *
-+ * \param pmcuState This parameter is a PMCU state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState)
-+{
-+    switch(pmcuState) 
-+    {
-+        case IFX_PMCU_STATE_D0:
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        case IFX_PMCU_STATE_D1: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D2: // Not Applicable
-+            return IFX_PMCU_RETURN_DENIED;
-+        case IFX_PMCU_STATE_D3: // Module clock gating and Power gating
-+            return IFX_PMCU_RETURN_SUCCESS;
-+        default:
-+            return IFX_PMCU_RETURN_DENIED;
-+    }
-+}
-+
-+/** 
-+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+ * \brief the callback function to get pmcu state in the power management hardware-dependent module
-+
-+ * \param pmcuState Pointer to return power state.
-+ *
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \return IFX_PMCU_RETURN_DENIED  Not allowed to operate power state
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return  IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return  IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/**
-+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule
-+ * 
-+ * \param   pmcuModule      Module
-+ * \param   newState        New state
-+ * \param   oldState        Old state
-+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully
-+ * \return IFX_PMCU_RETURN_ERROR   Failed to set power state.
-+ * \ingroup IFX_PCIE_PM
-+ */
-+static IFX_PMCU_RETURN_t 
-+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState)
-+{
-+    return IFX_PMCU_RETURN_SUCCESS;
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_init(void)
-+ * \brief Register with central PMCU module
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_init(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuRegister;
-+
-+    /* XXX, hook driver context */
-+
-+    /* State function register */
-+    memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t));
-+    pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuRegister.pmcuModuleNr = 0;
-+    pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change;
-+    pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get;
-+    pmcuRegister.pre = ifx_pcie_pmcu_prechange;
-+    pmcuRegister.post= ifx_pcie_pmcu_postchange;
-+    ifx_pmcu_register(&pmcuRegister); 
-+}
-+
-+/** 
-+ * \fn static void ifx_pcie_pmcu_exit(void)
-+ * \brief Unregister with central PMCU module
-+ *
-+ * \return none
-+ * \ingroup IFX_PCIE_PM
-+ */
-+void
-+ifx_pcie_pmcu_exit(void)
-+{
-+    IFX_PMCU_REGISTER_t pmcuUnRegister;
-+
-+   /* XXX, hook driver context */
-+   
-+    pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE;
-+    pmcuUnRegister.pmcuModuleNr = 0;
-+    ifx_pmcu_unregister(&pmcuUnRegister);
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_pm.h
-@@ -0,0 +1,36 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_pm.h
-+** PROJECT      : IFX UEIP
-+** MODULES      : PCIe Root Complex Driver
-+**
-+** DATE         : 21 Dec 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver Power Managment
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Lantiq Deutschland GmbH
-+**                      Am Campeon 3, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+**
-+** HISTORY
-+** $Date        $Author         $Comment
-+** 21 Dec,2009   Lei Chuanhua    First UEIP release
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_pm.h
-+ \ingroup IFX_PCIE 
-+ \brief header file for PCIe Root Complex Driver Power Management
-+*/
-+
-+#ifndef IFXMIPS_PCIE_PM_H
-+#define IFXMIPS_PCIE_PM_H
-+
-+void ifx_pcie_pmcu_init(void);
-+void ifx_pcie_pmcu_exit(void);
-+
-+#endif /* IFXMIPS_PCIE_PM_H  */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_reg.h
-@@ -0,0 +1,1001 @@
-+/******************************************************************************
-+**
-+** FILE NAME    : ifxmips_pcie_reg.h
-+** PROJECT      : IFX UEIP for VRX200
-+** MODULES      : PCIe module
-+**
-+** DATE         : 02 Mar 2009
-+** AUTHOR       : Lei Chuanhua
-+** DESCRIPTION  : PCIe Root Complex Driver
-+** COPYRIGHT    :       Copyright (c) 2009
-+**                      Infineon Technologies AG
-+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+**    This program is free software; you can redistribute it and/or modify
-+**    it under the terms of the GNU General Public License as published by
-+**    the Free Software Foundation; either version 2 of the License, or
-+**    (at your option) any later version.
-+** HISTORY
-+** $Version $Date        $Author         $Comment
-+** 0.0.1    17 Mar,2009  Lei Chuanhua    Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE  
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE        0x1D000000UL
-+#define PCIE_CFG_BASE           (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE        0x1C000000UL
-+#define PCIE_MEM_BASE           (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END        (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE         0x1D800000UL
-+#define PCIE_IO_BASE            (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END         (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE        (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG      (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE        0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE        0x1F106800UL
-+#define PCIE_PDI_BASE           (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE            0x400
-+
-+#define PCIE1_CFG_PHY_BASE        0x19000000UL
-+#define PCIE1_CFG_BASE           (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE           (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE        0x18000000UL
-+#define PCIE1_MEM_BASE           (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE           (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END        (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE         0x19800000UL
-+#define PCIE1_IO_BASE            (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE            (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END         (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE        (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG      (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE        0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE        0x1F700400UL
-+#define PCIE1_PDI_BASE           (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE            0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X)  ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X)  ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X)   ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X)      ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X)     ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE             0x00000001    /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP                    0x00000001  /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE       0x0000000E  /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S     1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE       0x000001F0  /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S     4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE              0x00000E00  /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S            9
-+
-+#define PCIE_RC_DR_PM_ENABLED                0x00001000  /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED         0x00002000  /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED         0x00004000  /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+    PCIE_RC_DR_D0 = 0,
-+    PCIE_RC_DR_D1,   /* Not supported */
-+    PCIE_RC_DR_D2,   /* Not supported */
-+    PCIE_RC_DR_D3,
-+    PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP              0x00000001   /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT           0x00000001  /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN                  0x00000002  /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET           0x00000004  /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET            0x00000008  /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET        0x00000010  /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET           0x00000020  /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET         0x00000040  /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET      0x00000080  /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI             0x00000002  /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN           0x00000004  /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI                    0x00000008  /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR                0x00000030  /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S              4
-+#define PCIE_IR_SR_INT_MSG_NUM               0x00003E00  /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S             9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM           0xF8000000  /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S         27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG     0x00000001  /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG           0x00000002  /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X)                      (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X)                     (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID       0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S                0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST                 0x00000001  /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1             0x00000002  /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1            0x00000004  /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE                 0x0000001F  /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S               0
-+#define PCIE_VM_MSG_DW0_FORMAT               0x00000060  /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S             5
-+#define PCIE_VM_MSG_DW0_TC                   0x00007000  /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S                 12
-+#define PCIE_VM_MSG_DW0_ATTR                 0x000C0000  /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S               18
-+#define PCIE_VM_MSG_DW0_EP_TLP               0x00100000  /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD                   0x00200000  /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN                  0xFFC00000  /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S                22
-+
-+/* Format Definition */
-+enum {
-+    PCIE_VM_MSG_FORMAT_00 = 0,  /* 3DW Hdr, no data*/
-+    PCIE_VM_MSG_FORMAT_01,      /* 4DW Hdr, no data */
-+    PCIE_VM_MSG_FORMAT_10,      /* 3DW Hdr, with data */
-+    PCIE_VM_MSG_FORMAT_11,      /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+    PCIE_VM_MSG_TC0 = 0,
-+    PCIE_VM_MSG_TC1,
-+    PCIE_VM_MSG_TC2,
-+    PCIE_VM_MSG_TC3,
-+    PCIE_VM_MSG_TC4,
-+    PCIE_VM_MSG_TC5,
-+    PCIE_VM_MSG_TC6,
-+    PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+    PCIE_VM_MSG_ATTR_00 = 0,   /* RO and No Snoop cleared */
-+    PCIE_VM_MSG_ATTR_01,       /* RO cleared , No Snoop set */
-+    PCIE_VM_MSG_ATTR_10,       /* RO set, No Snoop cleared*/
-+    PCIE_VM_MSG_ATTR_11,       /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN  0
-+#define PCIE_VM_MSG_LEN_MAX  1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM            0x00000070  /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S          8
-+#define PCIE_VM_MSG_DW1_CODE                0x00FF0000  /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S              16
-+#define PCIE_VM_MSG_DW1_TAG                 0xFF000000  /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S               24
-+
-+#define PCIE_VM_MSG_DW2(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X)                  (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X)                 (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ                 0x00000001  /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM                0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP                 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD                 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR               0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S             3
-+#define PCIE_AHB_SSB_REQ_TC                 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S               5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR               0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S             0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT            0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM                0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP                 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD                 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM            0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S          6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X)                     (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS     0x00000001 
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X)                        (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X)                       (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT                 0x00000001  /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX                   0x00000002  /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME                        0x00000004  /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG                    0x00000008  /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG                 0x00000010  /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG     0x00000020  /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG       0x00000040  /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG           0x00000080  /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG                 0x00000100  /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK         0x00000200  /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR           0x00000400  /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS        0x00000800  /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT                     0x00001000  /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA                       0x00002000  /* INTA */
-+#define PCIE_IRN_INTB                       0x00004000  /* INTB */
-+#define PCIE_IRN_INTC                       0x00008000  /* INTC */
-+#define PCIE_IRN_INTD                       0x00010000  /* INTD */
-+#define PCIE_IRN_WAKEUP                     0x00020000  /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT    (PCIE_IRN_AER_REPORT |  PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+                                      PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+                                      PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+                                      PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+                                      PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X)               (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X)           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X)                 (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM             0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S           0
-+#define PCIE_PNR_SECONDARY_BUS_NUM           0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S         8
-+#define PCIE_PNR_SUB_BUS_NUM                 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S               16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C)  /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR             0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR              0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S            4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT              0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR             0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S           12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20)  /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR                 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S               4
-+#define PCIE_MBML_MEM_LIMIT_ADDR                0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S              20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24)  /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR                    0x00000001
-+#define PCIE_PMBL_UPPER_12BIT                   0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S                 4
-+#define PCIE_PMBL_E64MA                         0x00010000
-+#define PCIE_PMBL_END_ADDR                      0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S                    20
-+#define PCIE_PMBU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28)  /* RC only */
-+#define PCIE_PMLU32(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C)  /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30)  /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE        0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S      0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT       0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S     16
-+
-+#define PCIE_CPR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE                 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S               0
-+#define PCIE_INTRBCTRL_INT_PIN                  0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S                8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE   0x00010000    /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE              0x00020000    /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE               0x00040000    /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE               0x00080000    /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE         0x00100000    /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS        0x00400000    /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+    PCIE_INTRBCTRL_INT_NON = 0,
-+    PCIE_INTRBCTRL_INTA,
-+    PCIE_INTRBCTRL_INTB,
-+    PCIE_INTRBCTRL_INTC,
-+    PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X)                  (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X)                   (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE           0x00000003   /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S         0
-+#define PCIE_PM_CSR_SW_RST                0x00000008   /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE            0x00000100   /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS            0x00008000   /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID             0x000000FF  /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S           0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR       0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S     8
-+#define PCIE_MCAPR_MSI_ENABLE             0x00010000  /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP          0x000E0000  /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S        17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE       0x00700000  /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S     20
-+#define PCIE_MCAPR_ADDR64_CAP             0X00800000  /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK                 0xFFFFFFFC  /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA                      0x0000FFFF  /* Message Data */
-+#define PCIE_MD_DATA_S                    0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID                      0x000000FF  /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S                    0
-+#define PCIE_XCAP_NEXT_CAP                0x0000FF00  /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S              8
-+#define PCIE_XCAP_VER                     0x000F0000  /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S                   16
-+#define PCIE_XCAP_DEV_PORT_TYPE           0x00F00000  /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S         20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED        0x01000000  /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM             0x3E000000  /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S           25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE        0x00000007   /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S      0
-+#define PCIE_DCAP_PHANTOM_FUNC            0x00000018   /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S          3
-+#define PCIE_DCAP_EXT_TAG                 0x00000020   /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY          0x000001C0   /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S        6
-+#define PCIE_DCAP_EP_L1_LATENCY           0x00000E00   /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S         9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT    0x00008000   /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+    PCIE_MAX_PAYLOAD_128 = 0,
-+    PCIE_MAX_PAYLOAD_256,
-+    PCIE_MAX_PAYLOAD_512,
-+    PCIE_MAX_PAYLOAD_1024,
-+    PCIE_MAX_PAYLOAD_2048,
-+    PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN        0x00000001   /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN           0x00000002   /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN              0x00000004   /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN                 0x00000008   /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN       0x00000010   /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE          0x000000E0   /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S        5
-+#define PCIE_DCTLSTS_EXT_TAG_EN                0x00000100   /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN           0x00000200   /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN                 0x00000400   /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN               0x00000800   /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE             0x00007000   /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S           12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR           0x00010000   /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR              0x00020000   /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER                  0x00040000   /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ           0x00080000   /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER                 0x00100000   /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING          0x00200000   /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN      (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+                                  PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+                                  PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED               0x0000000F  /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S             0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH             0x000003F0  /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S           4
-+#define PCIE_LCAP_ASPM_LEVEL                   0x00000C00  /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S                 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY             0x00007000  /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S           12
-+#define PCIE_LCAP_L1_EXIT_LATENCY              0x00038000  /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S            15
-+#define PCIE_LCAP_CLK_PM                       0x00040000  /* Clock Power Management */
-+#define PCIE_LCAP_SDER                         0x00080000  /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT            0x00100000  /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM                     0xFF0000000  /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S                   24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES  0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1   0x01  /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2   0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4   0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8   0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12  0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16  0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32  0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+    PCIE_ASPM_RES0                = 0,
-+    PCIE_ASPM_L0S_ENTRY_SUPPORT,        /* L0s */
-+    PCIE_ASPM_RES1,
-+    PCIE_ASPM_L0S_L1_ENTRY_SUPPORT,     /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+    PCIE_L0S_EIXT_LATENCY_L64NS    = 0, /* < 64 ns */
-+    PCIE_L0S_EIXT_LATENCY_B64A128,      /* > 64 ns < 128 ns */
-+    PCIE_L0S_EIXT_LATENCY_B128A256,     /* > 128 ns < 256 ns */
-+    PCIE_L0S_EIXT_LATENCY_B256A512,     /* > 256 ns < 512 ns */
-+    PCIE_L0S_EIXT_LATENCY_B512TO1U,     /* > 512 ns < 1 us */
-+    PCIE_L0S_EIXT_LATENCY_B1A2U,        /* > 1 us < 2 us */
-+    PCIE_L0S_EIXT_LATENCY_B2A4U,        /* > 2 us < 4 us */
-+    PCIE_L0S_EIXT_LATENCY_M4US,         /* > 4 us  */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+    PCIE_L1_EXIT_LATENCY_L1US  = 0,  /* < 1 us */
-+    PCIE_L1_EXIT_LATENCY_B1A2,       /* > 1 us < 2 us */
-+    PCIE_L1_EXIT_LATENCY_B2A4,       /* > 2 us < 4 us */
-+    PCIE_L1_EXIT_LATENCY_B4A8,       /* > 4 us < 8 us */
-+    PCIE_L1_EXIT_LATENCY_B8A16,      /* > 8 us < 16 us */
-+    PCIE_L1_EXIT_LATENCY_B16A32,     /* > 16 us < 32 us */
-+    PCIE_L1_EXIT_LATENCY_B32A64,     /* > 32 us < 64 us */
-+    PCIE_L1_EXIT_LATENCY_M64US,      /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE            0x00000003  /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S          0
-+#define PCIE_LCTLSTS_RCB128                 0x00000008  /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE           0x00000010  /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK           0x00000020  /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG            0x00000040  /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC               0x00000080  /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN              0x00000100  /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED             0x000F0000  /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S           16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH  0x03F00000  /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING        0x08000000  /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG           0x10000000  /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE             0x20000000  /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X)                    (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR  0x00000001   /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR     0x00000002   /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR        0x00000004   /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN               0x00000008   /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE    (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+                                     PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID                   0x0000FFFF   /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S                 0
-+#define PCIE_RSTS_PME_STATUS                   0x00010000   /* PME Status */
-+#define PCIE_RSTS_PME_PENDING                  0x00020000   /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X)                (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID                 0x0000FFFF  /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S               0
-+#define PCIE_ENHANCED_CAP_VER                0x000F0000  /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S              16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET        0xFFF00000  /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S      20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR          0x00000010  /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR             0x00000020  /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP                    0x00001000  /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR                 0x00002000  /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT              0x00004000  /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT                 0x00008000  /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION           0x00010000  /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW               0x00020000  /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP                   0x00040000  /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR                        0x00080000  /* ECRC Error Stauts */
-+#define PCIE_UR_REQ                          0x00100000  /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR    (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+                         PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT |   \
-+                         PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+                         PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR                          0x00000001  /* Receive Error Status */
-+#define PCIE_BAD_TLP                         0x00000040  /* Bad TLP Status */
-+#define PCIE_BAD_DLLP                        0x00000080  /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER             0x00000100  /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR        0x00001000  /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR            0x00002000  /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR        (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+                                     PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X)                        (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X)                       (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR            0x0000001F  /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S          0
-+#define PCIE_AECCR_ECRC_GEN_CAP             0x00000020  /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN              0x00000040  /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP           0x00000080  /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN            0x00000100  /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN  0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN     0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN        0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN  (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+                PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR                0x00000001   /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR          0x00000002   /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR              0x00000004   /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR        0x00000008   /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR  0x00000010   /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR                  0x00000020   /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR                      0x00000040   /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM                0xF8000000   /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S              27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID         0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S       0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID         0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S       16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT                    0x00000007  /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S                  0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT            0x00000070  /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S          4
-+#define PCIE_PVC1_REF_CLK                       0x00000300  /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S                     8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE       0x00000C00  /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S     10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN   0
-+#define PCIE_EXT_VC_CNT_MAX   7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+    PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR      0x00000001  /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR            0x00000002  /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR            0x00000004  /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR           0x00000008  /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR                0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET         0xFF000000  /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S       24
-+
-+/* Port VC Control and Status Register */     
-+#define PCIE_PVCCRSR(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB         0x00000001  /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL              0x0000000E  /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S            1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS       0x00010000  /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED        0x00000001  /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR         0x00000002  /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR         0x00000004  /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR        0x00000008  /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR     0x00000010  /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR     0x00000020  /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB          (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+                        PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+                        PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP             0x00008000  /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS            0x007F0000  /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S          16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET      0xFF000000  /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S    24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0                    0x00000001  /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1                    0x00000002  /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2                    0x00000004  /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3                    0x00000008  /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4                    0x00000010  /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5                    0x00000020  /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6                    0x00000040  /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7                    0x00000080  /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC                   0x000000FF  /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB       0x00010000  /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL            0x000E0000  /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S          17
-+#define PCIE_VC0_RC0_VC_ID                   0x07000000  /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S                 24
-+#define PCIE_VC0_RC0_VC_EN                   0x80000000  /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X)                     (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS    0x00010000  /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING         0x00020000  /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT   0x0000FFFF  /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT          0xFFFF0000  /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S        16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM                   0x000000FF  /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S                 0
-+#define PCIE_PFLR_FORCE_LINK                 0x00008000  /* Force link */
-+#define PCIE_PFLR_LINK_STATE                 0x003F0000  /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S               16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT        0xFF000000  /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S      24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF                          0x000000FF  /* Ack Frequency */
-+#define PCIE_AFR_AF_S                        0
-+#define PCIE_AFR_FTS_NUM                     0x0000FF00  /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S                   8
-+#define PCIE_AFR_COM_FTS_NUM                 0x00FF0000  /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S               16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY           0x07000000  /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S         24
-+#define PCIE_AFR_L1_ENTRY_LATENCY            0x38000000  /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S          27
-+#define PCIE_AFR_FTS_NUM_DEFAULT             32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT   7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT    5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X)                         (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ              0x00000001  /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE           0x00000002  /* Scramble Disable */  
-+#define PCIE_PLCR_LOOPBACK_EN                0x00000004  /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST              0x00000008  /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN                0x00000020  /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN           0x00000080  /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE                  0x003F0000  /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S                16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN           0x02000000  /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM               0x00FFFFFF  /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S             0
-+#define PCIE_LSR_FC_DISABLE                  0x01000000  /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE              0x02000000  /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE         0x80000000  /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS                          0x0000000F  /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S                        0
-+#define PCIE_SNR_SKP                         0x00000700  /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S                       8
-+#define PCIE_SNR_REPLAY_TIMER                0x0007C000  /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S              14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER        0x00F80000  /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S      19
-+#define PCIE_SNR_FC_TIMER                    0x1F000000  /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S                  28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL            0x000007FF  /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S          0
-+#define PCIE_STRFMR_FC_WDT_DISABLE          0x00008000  /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK    0x00010000  /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK         0x00020000  /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK            0x00040000  /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK        0x00080000  /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK           0x00100000  /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK    0x00200000  /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000  /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK         0x00800000  /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK           0x01000000  /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK         0x02000000  /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK       0x04000000  /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK              0x08000000  /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK              0x10000000  /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP           0x20000000  /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE           0x40000000  /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE          0x80000000  /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL    700             /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1    0x00000001  /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1    0x00000002  /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS           0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S         0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS            0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S          12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X)                            (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS         0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S       0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS          0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S        12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X)                             (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS         0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S       0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS          0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S        12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X)                              (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL               0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY           0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY               0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0               0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1               0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2               0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3               0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X)                          (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4               0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5               0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6               0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7               0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS            0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S          0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS             0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S           12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE          0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S        20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER           0x40000000 /* TLP Type Ordering for VC0 */    
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER           0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X)                      (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS          0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S        0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS           0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S         12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE        0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S      20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS          0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S        0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS           0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S         12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE        0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S      21
-+
-+/* Applicable to the above three registers */
-+enum {
-+    PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+    PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH   = 2,
-+    PCIE_VC0_TLP_QUEUE_MODE_BYPASS        = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES       0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S     0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES        0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S      16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X)                       (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES     0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S    16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X)                        (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES     0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S   0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES      0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S    16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X)                           (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/* 
-+ * PCIe PDI PHY register definition, suppose all the following 
-+ * stuff is confidential. 
-+ * XXX, detailed bit definition
-+ */
-+#define	PCIE_PHY_PLL_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define	PCIE_PHY_PLL_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define	PCIE_PHY_PLL_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define	PCIE_PHY_PLL_CTRL4(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define	PCIE_PHY_PLL_CTRL5(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define	PCIE_PHY_PLL_CTRL6(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define	PCIE_PHY_PLL_CTRL7(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define	PCIE_PHY_PLL_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define	PCIE_PHY_PLL_A_CTRL3(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define	PCIE_PHY_PLL_STATUS(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+ 
-+#define PCIE_PHY_TX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X)     (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X)        (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X)       (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X)         (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X)          (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X)      (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA  1
-+#define PCIE_LEGACY_INTB  2
-+#define PCIE_LEGACY_INTC  3
-+#define PCIE_LEGACY_INTD  4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#endif /* IFXMIPS_PCIE_REG_H */
-+
---- /dev/null
-+++ b/arch/mips/pci/ifxmips_pcie_vr9.h
-@@ -0,0 +1,271 @@
-+/****************************************************************************
-+                              Copyright (c) 2010
-+                            Lantiq Deutschland GmbH
-+                     Am Campeon 3; 85579 Neubiberg, Germany
-+
-+  For licensing information, see the file 'LICENSE' in the root folder of
-+  this software module.
-+
-+ *****************************************************************************/
-+/*!
-+  \file ifxmips_pcie_vr9.h
-+  \ingroup IFX_PCIE
-+  \brief PCIe RC driver vr9 specific file
-+*/
-+
-+#ifndef IFXMIPS_PCIE_VR9_H
-+#define IFXMIPS_PCIE_VR9_H
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include <linux/gpio.h>
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET  238
-+
-+#define IFX_REG_R32    ltq_r32
-+#define IFX_REG_W32    ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN                      ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ                         ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI                  0x00000080  /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU                                 (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M                    0x00000001  /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S                    0x00000010  /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M                    0x00000002  /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY   (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL  (1)
-+#define IFX_PMU1_MODULE_PDI        (4)
-+#define IFX_PMU1_MODULE_MSI        (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+#define IFX_GPIO				(KSEG1 | 0x1E100B00)
-+#define ALT0			((volatile u32*)(IFX_GPIO + 0x007c))
-+#define ALT1			((volatile u32*)(IFX_GPIO + 0x0080))
-+#define OD			((volatile u32*)(IFX_GPIO + 0x0084))
-+#define DIR			((volatile u32*)(IFX_GPIO + 0x0078))
-+#define OUT			((volatile u32*)(IFX_GPIO + 0x0070))
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+
-+	gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset");
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+
-+/*    ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+    ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void) 
-+{
-+	/* Enable AHB bus master/slave */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ahb");
-+	clk_enable(clk);
-+
-+    //AHBM_PMU_SETUP(IFX_PMU_ENABLE);
-+    //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg |= IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else 
-+    reg |= IFX_RCU_AHB_BE_PCIE_M;
-+    reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+    reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+    IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_enable(clk);
-+
-+	//PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "phy");
-+	clk_disable(clk);
-+
-+//    PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* SRAM2PDI endianness control. */
-+    reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+    /* Config AHB->PCIe and PDI endianness */
-+    reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+    IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+    /* Enable PDI to access PCIe PHY register */
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "pdi");
-+	clk_enable(clk);
-+    //PDI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+    /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly  */
-+    reg |= 0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    /* Reset PCIe PHY & Core, bit 22 */
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00400000;
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg |= 0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+    u32 reg;
-+
-+    /* Make sure one micro-second delay */
-+    udelay(1);
-+
-+    reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+    reg &= ~0x00001000; /* Bit 12 */
-+    IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+	printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+	gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+//    ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+    mdelay(100);
-+    printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+	gpio_direction_output(IFX_PCIE_GPIO_RESET, 1);
-+//    gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+    //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+	struct clk *clk;
-+	clk = clk_get_sys("1d900000.pcie", "ctl");
-+	clk_enable(clk);
-+	clk = clk_get_sys("1d900000.pcie", "bus");
-+	clk_enable(clk);
-+
-+    /* PCIe Core controller enabled */
-+//    PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+
-+    /* Enable PCIe L0 Clock */
-+//  PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+	struct clk *clk;
-+	pcie_msi_pic_init(pcie_port);
-+	clk = clk_get_sys("ltq_pcie", "msi");
-+	clk_enable(clk);
-+//    MSI_PMU_SETUP(IFX_PMU_ENABLE);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+    u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCI
-+    if (pcibios_host_nr() > 1) {
-+        tbus_number -= pcibios_1st_host_bus_nr();
-+    }
-+#endif /* CONFIG_IFX_PCI */
-+    return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+    struct pci_dev *pdev;
-+    u32 tvalue = value;
-+
-+    /* Sanity check */
-+    pdev = pci_get_slot(bus, devfn);
-+    if (pdev == NULL) {
-+        return tvalue;
-+    }
-+
-+    /* Only care about PCI bridge */
-+    if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+        return tvalue;
-+    }
-+
-+    if (read) { /* Read hack */
-+    #ifdef CONFIG_IFX_PCI
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+        }
-+    #endif /* CONFIG_IFX_PCI */  
-+    }
-+    else { /* Write hack */
-+    #ifdef CONFIG_IFX_PCI    
-+        if (pcibios_host_nr() > 1) {
-+            tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+        }
-+    #endif
-+    }
-+    return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -266,6 +266,31 @@ static int __init pcibios_init(void)
- 
- subsys_initcall(pcibios_init);
- 
-+int pcibios_host_nr(void)
-+{
-+    int count;
-+    struct pci_controller *hose;
-+    for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
-+        ;
-+    }
-+    return count;
-+}
-+EXPORT_SYMBOL(pcibios_host_nr);
-+
-+int pcibios_1st_host_bus_nr(void)
-+{
-+    int bus_nr = 0;
-+    struct pci_controller *hose = hose_head;
-+
-+    if (hose != NULL) {
-+        if (hose->bus != NULL) {
-+            bus_nr = hose->bus->number + 1;
-+        }
-+    }
-+    return bus_nr;
-+}
-+EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
-+
- static int pcibios_enable_resources(struct pci_dev *dev, int mask)
- {
- 	u16 cmd, old_cmd;
---- a/drivers/pci/pcie/aer/Kconfig
-+++ b/drivers/pci/pcie/aer/Kconfig
-@@ -5,7 +5,7 @@
- config PCIEAER
- 	boolean "Root Port Advanced Error Reporting support"
- 	depends on PCIEPORTBUS
--	default y
-+	default n
- 	help
- 	  This enables PCI Express Root Port Advanced Error Reporting
- 	  (AER) driver support. Error reporting messages sent to Root
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -1064,6 +1064,8 @@ void pci_walk_bus(struct pci_bus *top, i
- int pci_cfg_space_size_ext(struct pci_dev *dev);
- int pci_cfg_space_size(struct pci_dev *dev);
- unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-+int pcibios_host_nr(void);
-+int pcibios_1st_host_bus_nr(void);
- void pci_setup_bridge(struct pci_bus *bus);
- resource_size_t pcibios_window_alignment(struct pci_bus *bus,
- 					 unsigned long type);
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1040,6 +1040,12 @@
- #define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
- #define PCI_DEVICE_ID_SGI_IOC4		0x100a
- 
-+#define PCI_VENDOR_ID_INFINEON		0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE	0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE	0x0011
-+#define PCI_VENDOR_ID_LANTIQ		0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE	0x00
-+
- #define PCI_VENDOR_ID_WINBOND		0x10ad
- #define PCI_DEVICE_ID_WINBOND_82C105	0x0105
- #define PCI_DEVICE_ID_WINBOND_83C553	0x0565
diff --git a/target/linux/lantiq/patches-3.9/0012-MIPS-lantiq-adds-minimal-dcdc-driver.patch b/target/linux/lantiq/patches-3.9/0012-MIPS-lantiq-adds-minimal-dcdc-driver.patch
deleted file mode 100644
index 1a0ac21..0000000
--- a/target/linux/lantiq/patches-3.9/0012-MIPS-lantiq-adds-minimal-dcdc-driver.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From a810de459f90a62f5c1e27a2352b90318c5ef9a1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 5 Dec 2012 17:38:48 +0100
-Subject: [PATCH 12/22] MIPS: lantiq: adds minimal dcdc driver
-
-This driver so far only reads the core voltage.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile |    2 +-
- arch/mips/lantiq/xway/dcdc.c   |   74 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 75 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/lantiq/xway/dcdc.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,3 +1,3 @@
--obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
-+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
- 
- obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/dcdc.c
-@@ -0,0 +1,74 @@
-+/*
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ *
-+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ *  Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* Bias and regulator Setup Register */
-+#define DCDC_BIAS_VREG0	0xa
-+/* Bias and regulator Setup Register */
-+#define DCDC_BIAS_VREG1	0xb
-+
-+#define dcdc_w8(x, y)	ltq_w8((x), dcdc_membase + (y))
-+#define dcdc_r8(x)	ltq_r8(dcdc_membase + (x))
-+
-+static void __iomem *dcdc_membase;
-+
-+static int dcdc_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		dev_err(&pdev->dev, "Failed to get resource\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* remap dcdc register range */
-+	dcdc_membase = devm_request_and_ioremap(&pdev->dev, res);
-+	if (!dcdc_membase) {
-+		dev_err(&pdev->dev, "Failed to remap resource\n");
-+		return -ENOMEM;
-+	}
-+
-+	dev_info(&pdev->dev, "Core Voltage : %d mV\n", dcdc_r8(DCDC_BIAS_VREG1) * 8);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id dcdc_match[] = {
-+	{ .compatible = "lantiq,dcdc-xrx200" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, dcdc_match);
-+
-+static struct platform_driver dcdc_driver = {
-+	.probe = dcdc_probe,
-+	.driver = {
-+		.name = "dcdc-xrx200",
-+		.owner = THIS_MODULE,
-+		.of_match_table = dcdc_match,
-+	},
-+};
-+
-+int __init dcdc_init(void)
-+{
-+	int ret = platform_driver_register(&dcdc_driver);
-+
-+	if (ret)
-+		pr_info("dcdc: Error registering platform driver\n");
-+	return ret;
-+}
-+
-+arch_initcall(dcdc_init);
diff --git a/target/linux/lantiq/patches-3.9/0014-MTD-lantiq-xway-make-nand-actually-work.patch b/target/linux/lantiq/patches-3.9/0014-MTD-lantiq-xway-make-nand-actually-work.patch
deleted file mode 100644
index 839021d..0000000
--- a/target/linux/lantiq/patches-3.9/0014-MTD-lantiq-xway-make-nand-actually-work.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 48b06753494e3abbf97ffebe02b1765edab7c689 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Oct 2012 10:25:39 +0200
-Subject: [PATCH 14/22] MTD: lantiq: xway: make nand actually work
-
-http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/xway_nand.c |   54 +++++++++++++++++++++++++++++++++++-------
- 1 file changed, 45 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/nand/xway_nand.c
-+++ b/drivers/mtd/nand/xway_nand.c
-@@ -54,19 +54,29 @@
- #define NAND_CON_CSMUX		(1 << 1)
- #define NAND_CON_NANDM		1
- 
-+static u32 xway_latchcmd;
-+
- static void xway_reset_chip(struct nand_chip *chip)
- {
- 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
- 	unsigned long flags;
-+	unsigned long timeout;
- 
- 	nandaddr &= ~NAND_WRITE_ADDR;
- 	nandaddr |= NAND_WRITE_CMD;
- 
- 	/* finish with a reset */
-+	timeout = jiffies + msecs_to_jiffies(200);
-+
- 	spin_lock_irqsave(&ebu_lock, flags);
-+
- 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
--	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
--		;
-+	do {
-+		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+			break;
-+		cond_resched();
-+	} while (!time_after_eq(jiffies, timeout));
-+
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- }
- 
-@@ -94,17 +104,15 @@ static void xway_cmd_ctrl(struct mtd_inf
- 	unsigned long flags;
- 
- 	if (ctrl & NAND_CTRL_CHANGE) {
--		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
- 		if (ctrl & NAND_CLE)
--			nandaddr |= NAND_WRITE_CMD;
--		else
--			nandaddr |= NAND_WRITE_ADDR;
--		this->IO_ADDR_W = (void __iomem *) nandaddr;
-+			xway_latchcmd = NAND_WRITE_CMD;
-+		else if (ctrl & NAND_ALE)
-+			xway_latchcmd = NAND_WRITE_ADDR;
- 	}
- 
- 	if (cmd != NAND_CMD_NONE) {
- 		spin_lock_irqsave(&ebu_lock, flags);
--		writeb(cmd, this->IO_ADDR_W);
-+		writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
- 		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- 			;
- 		spin_unlock_irqrestore(&ebu_lock, flags);
-@@ -124,12 +132,38 @@ static unsigned char xway_read_byte(stru
- 	int ret;
- 
- 	spin_lock_irqsave(&ebu_lock, flags);
--	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
-+	ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
- 	spin_unlock_irqrestore(&ebu_lock, flags);
- 
- 	return ret;
- }
- 
-+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA));
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
-+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-+	unsigned long flags;
-+	int i;
-+
-+	spin_lock_irqsave(&ebu_lock, flags);
-+	for (i = 0; i < len; i++)
-+		ltq_w8(buf[i], (void __iomem *)nandaddr);
-+	spin_unlock_irqrestore(&ebu_lock, flags);
-+}
-+
- static int xway_nand_probe(struct platform_device *pdev)
- {
- 	struct nand_chip *this = platform_get_drvdata(pdev);
-@@ -175,6 +209,8 @@ static struct platform_nand_data xway_na
- 		.dev_ready	= xway_dev_ready,
- 		.select_chip	= xway_select_chip,
- 		.read_byte	= xway_read_byte,
-+		.read_buf	= xway_read_buf,
-+		.write_buf	= xway_write_buf,
- 	}
- };
- 
diff --git a/target/linux/lantiq/patches-3.9/0016-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.9/0016-owrt-generic-dtb-image-hack.patch
deleted file mode 100644
index deac9bf..0000000
--- a/target/linux/lantiq/patches-3.9/0016-owrt-generic-dtb-image-hack.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From abb41103513db26f66168a7d3bbd45d123e45549 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 29 Jun 2013 19:22:02 +0200
-Subject: [PATCH 16/22] owrt: generic dtb image hack
-
----
- arch/mips/kernel/head.S |    3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
- 	.fill	0x400
- #endif /* CONFIG_IMAGE_CMDLINE_HACK */
- 
-+	.ascii  "OWRTDTB:"
-+	EXPORT(__image_dtb)
-+	.fill   0x4000
- 	__REF
- 
- NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/lantiq/patches-3.9/0023-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch b/target/linux/lantiq/patches-3.9/0023-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch
deleted file mode 100644
index 21d9ee0..0000000
--- a/target/linux/lantiq/patches-3.9/0023-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 0184f7b64c68fe9606559e86bdd288de01c87a85 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 17 Mar 2013 10:30:48 +0100
-Subject: [PATCH 200/208] MIPS: read the mips_machine name from OF and output
- it in /proc/cpuinfo
-
-This allows the userland to be compatible to the devive probing of mips_machine.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/prom.h |    3 +++
- arch/mips/kernel/proc.c      |    6 +++++-
- arch/mips/kernel/prom.c      |   24 ++++++++++++++++++++++++
- 3 files changed, 32 insertions(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/prom.h
-+++ b/arch/mips/include/asm/prom.h
-@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_
- 	__dt_setup_arch(&__dtb_##sym##_begin);				\
- })
- 
-+extern char *of_mips_get_machine_name(void);
-+
- #else /* CONFIG_OF */
- static inline void device_tree_init(void) { }
-+static char *of_mips_get_machine_name(void) { return NULL; }
- #endif /* CONFIG_OF */
- 
- #endif /* __ASM_PROM_H */
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -12,6 +12,7 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsregs.h>
- #include <asm/processor.h>
-+#include <asm/prom.h>
- #include <asm/mips_machine.h>
- 
- unsigned int vced_count, vcei_count;
-@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file
- 	 */
- 	if (n == 0) {
- 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
--		if (mips_get_machine_name())
-+		if (of_mips_get_machine_name())
-+			seq_printf(m, "machine\t\t\t: %s\n",
-+				   of_mips_get_machine_name());
-+		else if (mips_get_machine_name())
- 			seq_printf(m, "machine\t\t\t: %s\n",
- 				   mips_get_machine_name());
- 	}
---- a/arch/mips/kernel/prom.c
-+++ b/arch/mips/kernel/prom.c
-@@ -23,6 +23,13 @@
- #include <asm/page.h>
- #include <asm/prom.h>
- 
-+static char of_mips_machine_name[64] = "Unknown";
-+
-+char *of_mips_get_machine_name(void)
-+{
-+	return of_mips_machine_name;
-+}
-+
- int __init early_init_dt_scan_memory_arch(unsigned long node,
- 					  const char *uname, int depth,
- 					  void *data)
-@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_a
- }
- #endif
- 
-+int __init early_init_dt_scan_model(unsigned long node,
-+	const char *uname, int depth,
-+	void *data)
-+{
-+	if (!depth) {
-+		char *model = of_get_flat_dt_prop(node, "model", NULL);
-+		if (model) {
-+			snprintf(of_mips_machine_name, sizeof(of_mips_machine_name), model);
-+			pr_info("MIPS: machine is %s\n", of_mips_machine_name);
-+		}
-+	}
-+	return 0;
-+}
-+
- void __init early_init_devtree(void *params)
- {
- 	/* Setup flat device-tree pointer */
-@@ -65,6 +86,9 @@ void __init early_init_devtree(void *par
- 	/* Scan memory nodes */
- 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
- 	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
-+
-+	/* try to load the mips machine name */
-+	of_scan_flat_dt(early_init_dt_scan_model, NULL);
- }
- 
- void __init __dt_setup_arch(struct boot_param_header *bph)
diff --git a/target/linux/lantiq/patches-3.9/0024-owrt-mtd-split.patch b/target/linux/lantiq/patches-3.9/0024-owrt-mtd-split.patch
deleted file mode 100644
index 16da438..0000000
--- a/target/linux/lantiq/patches-3.9/0024-owrt-mtd-split.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-From 2a295753a10823a47542c779a25bbb1f52c71281 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 3 Aug 2012 10:27:13 +0200
-Subject: [PATCH 19/25] owrt mtd split
-
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    1 +
- arch/mips/lantiq/setup.c                           |    7 +
- drivers/mtd/Kconfig                                |    4 +
- drivers/mtd/mtdpart.c                              |  173 +++++++++++++++++++-
- 4 files changed, 184 insertions(+), 1 deletions(-)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -31,6 +31,10 @@ config MTD_ROOTFS_SPLIT
- 	bool "Automatically split 'rootfs' partition for squashfs"
- 	default y
- 
-+config MTD_UIMAGE_SPLIT
-+	bool "Automatically split 'linux' partition into 'kernel' and 'rootfs'"
-+	default y
-+
- config MTD_REDBOOT_PARTS
- 	tristate "RedBoot partition table parsing"
- 	---help---
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -833,6 +833,168 @@ static int refresh_rootfs_split(struct m
- }
- #endif /* CONFIG_MTD_ROOTFS_SPLIT */
- 
-+#ifdef CONFIG_MTD_UIMAGE_SPLIT
-+static unsigned long find_uimage_size(struct mtd_info *mtd,
-+				      unsigned long offset)
-+{
-+#define UBOOT_MAGIC	0x56190527
-+	unsigned long magic = 0;
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return 0;
-+
-+	if (le32_to_cpu(magic) != UBOOT_MAGIC)
-+		return 0;
-+
-+	ret = mtd_read(mtd, offset + 12, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	return temp + 0x40;
-+}
-+
-+static unsigned long find_eva_size(struct mtd_info *mtd,
-+				      unsigned long offset)
-+{
-+#define EVA_MAGIC	0xfeed1281
-+	unsigned long magic = 0;
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&magic);
-+	if (ret || len != sizeof(magic))
-+		return 0;
-+
-+	if (le32_to_cpu(magic) != EVA_MAGIC)
-+		return 0;
-+
-+	ret = mtd_read(mtd, offset + 4, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	/* add eva header size */
-+	temp = le32_to_cpu(temp) + 0x18;
-+
-+	temp &= ~0xffff;
-+	temp += 0x10000;
-+	return temp;
-+}
-+
-+static int detect_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
-+{
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+
-+	return le32_to_cpu(temp) == SQUASHFS_MAGIC;
-+}
-+
-+static int detect_eva_squashfs_partition(struct mtd_info *mtd, unsigned long offset)
-+{
-+	unsigned long temp;
-+	size_t len;
-+	int ret;
-+
-+	ret = mtd_read(mtd, offset, 4, &len, (void *)&temp);
-+	if (ret || len != sizeof(temp))
-+		return 0;
-+
-+	return be32_to_cpu(temp) == SQUASHFS_MAGIC;
-+}
-+
-+static unsigned long find_brnimage_size(struct mtd_info *mtd,
-+					unsigned long offset)
-+{
-+	unsigned long buf[4];
-+	// Assume at most 2MB of kernel image
-+	unsigned long end = offset + (2 << 20);
-+	unsigned long ptr = offset + 0x400 - 12;
-+	size_t len;
-+	int ret;
-+
-+	while (ptr < end) {
-+		long size_min = ptr - 0x400 - 12 - offset;
-+		long size_max = ptr + 12 - offset;
-+		ret = mtd_read(mtd, ptr, 16, &len, (void *)buf);
-+		if (ret || len != 16)
-+			return 0;
-+
-+		if (le32_to_cpu(buf[0]) < size_min ||
-+		    le32_to_cpu(buf[0]) > size_max) {
-+			ptr += 0x400;
-+			continue;
-+		}
-+
-+		if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC)
-+			return ptr + 12 - offset;
-+
-+		ptr += 0x400;
-+	}
-+
-+	return 0;
-+}
-+
-+static int split_uimage(struct mtd_info *mtd,
-+			const struct mtd_partition *part)
-+{
-+	static struct mtd_partition split_partitions[] = {
-+		{
-+			.name = "kernel",
-+			.offset = 0x0,
-+			.size = 0x0,
-+		}, {
-+			.name = "rootfs",
-+			.offset = 0x0,
-+			.size = 0x0,
-+		},
-+	};
-+
-+	split_partitions[0].size = find_uimage_size(mtd, part->offset);
-+	if (!split_partitions[0].size) {
-+		split_partitions[0].size = find_eva_size(mtd, part->offset);
-+		if (!split_partitions[0].size) {
-+			split_partitions[0].size = find_brnimage_size(mtd, part->offset);
-+			if (!split_partitions[0].size) {
-+				printk(KERN_NOTICE "no uImage or brnImage or eva found in linux partition\n");
-+				return -1;
-+			}
-+		}
-+	}
-+
-+	if (detect_eva_squashfs_partition(mtd,
-+				       part->offset
-+				       + split_partitions[0].size)) {
-+		split_partitions[0].size += 0x100;
-+		pr_info("found eva dummy squashfs behind kernel\n");
-+	} else if (!detect_squashfs_partition(mtd,
-+				       part->offset
-+				       + split_partitions[0].size)) {
-+		split_partitions[0].size &= ~(mtd->erasesize - 1);
-+		split_partitions[0].size += mtd->erasesize;
-+	} else {
-+		pr_info("found squashfs behind kernel\n");
-+	}
-+
-+	split_partitions[0].offset = part->offset;
-+	split_partitions[1].offset = part->offset + split_partitions[0].size;
-+	split_partitions[1].size = part->size - split_partitions[0].size;
-+
-+	add_mtd_partitions(mtd, split_partitions, 2);
-+
-+	return 0;
-+}
-+#endif
-+
- /*
-  * This function, given a master MTD object and a partition table, creates
-  * and registers slave MTD objects which are bound to the master according to
-@@ -849,7 +1011,7 @@ int add_mtd_partitions(struct mtd_info *
- 	struct mtd_part *slave;
- 	uint64_t cur_offset = 0;
- 	int i;
--#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT)
- 	int ret;
- #endif
- 
-@@ -866,6 +1028,15 @@ int add_mtd_partitions(struct mtd_info *
- 
- 		add_mtd_device(&slave->mtd);
- 
-+#ifdef CONFIG_MTD_UIMAGE_SPLIT
-+		if (!strcmp(parts[i].name, "linux")) {
-+			ret = split_uimage(master, &parts[i]);
-+
-+			if (ret)
-+				printk(KERN_WARNING "Can't split linux partition\n");
-+		}
-+#endif
-+
- 		if (!strcmp(parts[i].name, "rootfs")) {
- #ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
- 			if (ROOT_DEV == 0) {
diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default
index d888b1e..dddd7a6 100644
--- a/target/linux/lantiq/xrx200/config-default
+++ b/target/linux/lantiq/xrx200/config-default
@@ -41,3 +41,4 @@ CONFIG_USB_COMMON=y
 # CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_UHCI_HCD is not set
+CONFIG_XRX200_PHY_FW=y
diff --git a/target/linux/lantiq/xway/config-default b/target/linux/lantiq/xway/config-default
index 9feaa8e..7a5cc3f 100644
--- a/target/linux/lantiq/xway/config-default
+++ b/target/linux/lantiq/xway/config-default
@@ -16,10 +16,6 @@ CONFIG_IRQ_WORK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_XWAY=y
 # CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_NLS=y
 # CONFIG_PROC_DEVICETREE is not set