more 2.6.24 patches

SVN-Revision: 10410

2 files changed, 118 insertions, 1 deletions

diff --git a/target/linux/ar7/patches-2.6.24/100-board_support.patch b/target/linux/ar7/patches-2.6.24/100-board_support.patch
index d23aecf..eefeb65 100644
--- a/target/linux/ar7/patches-2.6.24/100-board_support.patch
+++ b/target/linux/ar7/patches-2.6.24/100-board_support.patch
@@ -2,7 +2,7 @@ Index: linux-2.6.23-rc6/arch/mips/Kconfig
 ===================================================================
 --- linux-2.6.23-rc6.orig/arch/mips/Kconfig	2007-09-21 16:23:51.000000000 +0800
 +++ linux-2.6.23-rc6/arch/mips/Kconfig	2007-09-21 16:24:11.000000000 +0800
-@@ -15,6 +15,22 @@
+@@ -15,6 +15,24 @@
  	prompt "System type"
  	default SGI_IP22
  
@@ -10,6 +10,8 @@ Index: linux-2.6.23-rc6/arch/mips/Kconfig
 +	bool "Texas Instruments AR7"
 +	select BOOT_ELF32
 +	select DMA_NONCOHERENT
++	select CEVT_R4K
++	select CSRC_R4K
 +	select IRQ_CPU
 +	select NO_EXCEPT_FILL
 +	select SWAP_IO_SPACE
diff --git a/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch b/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch
new file mode 100644
index 0000000..4957d85
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.24/140-cpmac_fix.patch
@@ -0,0 +1,115 @@
+--- linux-2.6.24/drivers/net/Kconfig	2008-02-07 02:29:04.000000000 +0100
++++ linux-2.6.24/drivers/net/Kconfig	2008-02-07 02:29:35.000000000 +0100
+@@ -1830,10 +1830,8 @@
+ 
+ config CPMAC
+ 	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+-	depends on NET_ETHERNET && EXPERIMENTAL && AR7
++	depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
+ 	select PHYLIB
+-	select FIXED_PHY
+-	select FIXED_MII_100_FDX
+ 	help
+ 	  TI AR7 CPMAC Ethernet support
+ 
+--- linux-2.6.24/drivers/net/cpmac.c	2008-01-24 23:58:37.000000000 +0100
++++ linux-2.6.24/drivers/net/cpmac.c	2008-02-07 02:32:57.000000000 +0100
+@@ -661,9 +661,6 @@
+ 	int queue;
+ 	u32 status;
+ 
+-	if (!dev)
+-		return IRQ_NONE;
+-
+ 	priv = netdev_priv(dev);
+ 
+ 	status = cpmac_read(priv->regs, CPMAC_MAC_INT_VECTOR);
+@@ -848,15 +845,6 @@
+ 	spin_unlock(&priv->lock);
+ }
+ 
+-static int cpmac_link_update(struct net_device *dev,
+-			     struct fixed_phy_status *status)
+-{
+-	status->link = 1;
+-	status->speed = 100;
+-	status->duplex = 1;
+-	return 0;
+-}
+-
+ static int cpmac_open(struct net_device *dev)
+ {
+ 	int i, size, res;
+@@ -999,11 +987,11 @@
+ static int __devinit cpmac_probe(struct platform_device *pdev)
+ {
+ 	int rc, phy_id, i;
++	int mdio_bus_id = cpmac_mii.id;
+ 	struct resource *mem;
+ 	struct cpmac_priv *priv;
+ 	struct net_device *dev;
+ 	struct plat_cpmac_data *pdata;
+-	struct fixed_info *fixed_phy;
+ 	DECLARE_MAC_BUF(mac);
+ 
+ 	pdata = pdev->dev.platform_data;
+@@ -1017,9 +1005,23 @@
+ 	}
+ 
+ 	if (phy_id == PHY_MAX_ADDR) {
+-		if (external_switch || dumb_switch)
++		if (external_switch || dumb_switch) {
++			struct fixed_phy_status status = {};
++
++			mdio_bus_id = 0;
++
++			/*
++			 * FIXME: this should be in the platform code!
++			 * Since there is not platform code at all (that is,
++			 * no mainline users of that driver), place it here
++			 * for now.
++			 */
+ 			phy_id = 0;
+-		else {
++			status.link = 1;
++			status.duplex = 1;
++			status.speed = 100;
++			fixed_phy_add(PHY_POLL, phy_id, &status);
++		} else {
+ 			printk(KERN_ERR "cpmac: no PHY present\n");
+ 			return -ENODEV;
+ 		}
+@@ -1063,32 +1065,8 @@
+ 	priv->msg_enable = netif_msg_init(debug_level, 0xff);
+ 	memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
+ 
+-	if (phy_id == 31) {
+-		snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
+-			 phy_id);
+-	} else {
+-		/* Let's try to get a free fixed phy... */
+-		for (i = 0; i < MAX_PHY_AMNT; i++) {
+-			fixed_phy = fixed_mdio_get_phydev(i);
+-			if (!fixed_phy)
+-				continue;
+-			if (!fixed_phy->phydev->attached_dev) {
+-				strncpy(priv->phy_name,
+-					fixed_phy->phydev->dev.bus_id,
+-					BUS_ID_SIZE);
+-				fixed_mdio_set_link_update(fixed_phy->phydev,
+-							   &cpmac_link_update);
+-				goto phy_found;
+-			}
+-		}
+-		if (netif_msg_drv(priv))
+-			printk(KERN_ERR "%s: Could not find fixed PHY\n",
+-			       dev->name);
+-		rc = -ENODEV;
+-		goto fail;
+-	}
++	snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ 
+-phy_found:
+ 	priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
+ 				PHY_INTERFACE_MODE_MII);
+ 	if (IS_ERR(priv->phy)) {