add new image/Makefile

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169

1 files changed, 277 insertions, 526 deletions

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 6ff1bb1..bb88921 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -17,14 +17,16 @@ endef
 
 VMLINUX:=$(IMG_PREFIX)-vmlinux
 UIMAGE:=$(IMG_PREFIX)-uImage
-fs_squash:=squashfs-only
+
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-	fs_squash:=initramfs
-	VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
-	UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
+VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
+UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
+define Image/Build/Initramfs
+	$(call Image/Build/Profile/$(PROFILE),initramfs)
+endef
 endif
 
-ifeq ($(CONFIG_RALINK_RT288X),y)
+ifeq ($(CONFIG_SOC_RT288X),y)
 define kernel_entry
 -a 0x88000000 -e 0x88000000
 endef
@@ -34,32 +36,6 @@ define kernel_entry
 endef
 endif
 
-define mkcmdline
-board=$(1) console=$(2),$(3)
-endef
-
-define CompressLzma
-  $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
-endef
-
-define PatchKernelLzma
-	cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
-	$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
-	$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
-endef
-
-define MkImage
-	$(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
-	-mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
-		-n "$(imagename)" \
-		-d $(2) $(3)
-endef
-
-define MkImageLzma
-	$(call PatchKernelLzma,$(1),$(2))
-	$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3))
-endef
-
 define MkCombineduImage
 	$(call PatchKernelLzma,$(2),$(3))
 	if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \
@@ -72,269 +48,120 @@ define MkCombineduImage
 	$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
 endef
 
-define CatFiles
-	if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
-		echo "Warning: $(1) is too big" >&2; \
-	else if [ `stat -c%s $(3)` -gt $(4) ]; then \
-		echo "Warning: $(3) is too big" >&2; \
-	else \
-		( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
-	fi; fi
-endef
-
-define Sysupgrade/KRuImage
-	$(eval output_name=$(if $(5),$(call imgname,$(1),$(2))-$(5),$(call sysupname,$(1),$(2))))
-	$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(output_name))
-endef
-
-define mkmtd
-mtdparts=$(1):$(2)
-endef
-
-define mkmtd/phys
-$(call mkmtd,physmap-flash.0,$(1))
-endef
-
-define mkmtd/spi
-$(call mkmtd,spi0.0,$(1))
-endef
-
-define Image/BuildKernel
-	cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
-	cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
-	$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
-	$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
-	cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
-	$(call Image/Build/Initramfs)
-endef
-
-define BuildFirmware/Generic
-	$(call MkImageLzma,$(2),$(3),$(6))
-	$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5),$(7))
-endef
-
-define BuildFirmware/Generic/initramfs
-	$(call MkImageLzma,$(2),$(3))
-	$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
-endef
 
-mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-define BuildFirmware/GENERIC_4M
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120,$(7),$(8))
-endef
-
-define BuildFirmware/GENERIC_4M/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)))
-endef
-
-mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
-kernel_size_8M=917504
-rootfs_size_8M=7143424
-define BuildFirmware/GENERIC_8M
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7),$(8))
-endef
-
-define BuildFirmware/GENERIC_8M/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
-endef
-
-define BuildFirmware/UIMAGE_8M
-	$(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7))
-endef
-
-mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
-define BuildFirmware/3G6200N
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048)
-endef
-
-mtdlayout_allnet_all5002=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),31424k(rootfs),32448k@0x50000(firmware)
-define BuildFirmware/ALL5002
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002)),1048576,32178176)
-endef
-
-define BuildFirmware/ALL5002/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002)))
-endef
-
-mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
-mtd_argus_atp52b_kernel_part_size=1179648
-mtd_argus_atp52b_rootfs_part_size=6815744
-define BuildFirmware/ARGUS_ATP52B
-	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
-endef
+#
+# The real magic happens inside these templates
+#
 
-# djh - Note all of these are marked Read-Only for now
-mtdlayout_broadway=192k(bootloader)ro,64k(config)ro,64k(factory)ro,1024k(kernel)ro,6720k(rootfs),7744k@0x50000(firmware)
-mtd_broadway_kernel_part_size=1048576
-mtd_broadway_rootfs_part_size=6881280
-define BuildFirmware/BROADWAY
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)),$(mtd_broadway_kernel_part_size),$(mtd_broadway_rootfs_part_size),Broadway Kernel Image,factory.bin)
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)),$(mtd_broadway_kernel_part_size),$(mtd_broadway_rootfs_part_size))
+define MkImage
+	$(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
+	-mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
+		-n "$(imagename)" \
+		-d $(2) $(3)
 endef
 
-define BuildFirmware/BROADWAY/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_broadway)))
+define CompressLzma
+	$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
 endef
 
-define BuildFirmware/Buffalo
-	$(call MkImageLzma,$(2),$(3))
-	$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
-	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
-		buffalo-enc -p $(3) -v 1.76 \
-			-i $(KDIR)/vmlinux-$(2).uImage \
-			-o $(KDIR)/vmlinux-$(2).uImage.enc; \
-		buffalo-enc -p $(3) -v 1.76 \
-			-i $(KDIR)/root.$(1) \
-			-o $(KDIR)/root.$(2).enc; \
-		buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
-			-l mlang8 -f 1 -r EU \
-			-i $(KDIR)/vmlinux-$(2).uImage.enc \
-			-i $(KDIR)/root.$(2).enc \
-			-o $(call imgname,$(1),$(2))-factory-EU.bin; \
+define MkImageSysupgrade/squashfs
+	$(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
+	cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name)
+	$(call prepare_generic_squashfs,$(KDIR)/$(output_name))
+	if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \
+		echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
+	else \
+		$(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
 	fi
 endef
 
-
-define BuildFirmware/Buffalo2
-	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6))
-endef
-
-mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_dir300b1_kernel_part_size=917504
-mtd_dir300b1_rootfs_part_size=2949120
-define BuildFirmware/DIR300B1
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
-	-mkwrgimg -s $(4) -d /dev/mtdblock/2 \
-		-i $(call sysupname,$(1),$(2)) \
-		-o $(call imgname,$(1),$(2))-factory.bin
-endef
-
-define BuildFirmware/DIR300B1/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
-endef
-
-mtdlayout_dir615h1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-define BuildFirmware/DIR615H1
-        $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)),917504,2949120)
-	-mkdir615h1 -e $(call sysupname,$(1),$(2)) \
-		-o $(call imgname,$(1),$(2))-factory.bin
-endef
-
-define BuildFirmware/DIR615H1/initramfs
-        $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir615h1)))
+define PatchKernelLzmaDtb
+	cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
+	$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts
+	$(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(2).dtb
+	$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
 endef
 
-mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware)
-mtd_dap1350_kernel_part_size=1114112
-mtd_dap1350_rootfs_part_size=6553600
-define BuildFirmware/DAP1350
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
-	-mkdapimg -s $(4) \
-		-i $(call sysupname,$(1),$(2)) \
-		-o $(call imgname,$(1),$(2))-factory.bin
+define MkImageLzmaDtb
+	$(call PatchKernelLzmaDtb,$(1),$(2))
+	$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage,$(3))
 endef
 
-define BuildFirmware/DAP1350/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
+define BuildFirmware/OF
+	$(call MkImageLzmaDtb,$(2),$(3),$(5))
+	$(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6))
 endef
 
-mtdlayout_dir620a1=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
-kernel_size_dir620a1=917504
-rootfs_size_dir620a1=7143424
-define BuildFirmware/DIR620A1
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1),DIR_620)
+define BuildFirmware/OF/initramfs
+	$(call MkImageLzmaDtb,$(2),$(3))
+	$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
 endef
 
-define BuildFirmware/DIR620A1/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir620a1)),$(kernel_size_dir620a1),$(rootfs_size_dir620a1))
-endef
 
-define BuildFirmware/Edimax
+# Build images for default ralink layout for 4MB flash
+# kernel + roots = 0x3b0000
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+ralink_default_fw_size_4M=3866624
+BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M))
+BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# Build images for default ralink layout for 8MB flash
+# kernel + roots = 0x7b0000
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+ralink_default_fw_size_8M=8060928
+BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
+BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# Build images for a custom sized flash layout
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+# $(4) = kernel + rootfs size
+BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6))
+BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# wrappers for boards that have 4MB and 8MB versions
+define BuildFirmware/DefaultDualSize/squashfs
+	$(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M)
+	$(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M)
+endef
+define BuildFirmware/DefaultDualSize/initramfs
+	$(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M)
+	$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
+endef
+
+# Some boards need a special header inside the uImage to make them bootable
+define BuildFirmware/CustomFlashFactory/squashfs
+	$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4))
+	$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6))
+endef
+BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# sign an image to make it work with edimax tftp recovery
+define BuildFirmware/Edimax/squashfs
+	$(call BuildFirmware/OF,$(1),$(2),$(3),$(4))
 	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
 		mkedimaximg -i $(call sysupname,$(1),$(2)) \
 			-o $(call imgname,$(1),$(2))-factory.bin \
-			-s $(3) -m $(4) -f $(5) -S $(6); \
+			-s $(5) -m $(6) -f $(7) -S $(8); \
 	fi
 endef
+BuildFirmware/Edimax/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
 
-define BuildFirmware/BR6524N
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917484,2949120)
-	$(call BuildFirmware/Edimax,$(1),br6524n,CSYS,WNRA,0x50000,0xc00000)
-endef
-
-mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
-mtd_f5d8235_kernel_part_size=1572864
-mtd_f5d8235_rootfs_part_size=6356992
-define BuildFirmware/F5D8235
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call  mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
-endef
-
-define BuildFirmware/FONERA20N
-	$(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
-	$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
-endef
-
-define BuildFirmware/FONERA20N/initramfs
-	$(call BuildFirmware/GENERIC_8M/initramfs,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
-endef
-
-define BuildFirmware/RT-N13U
-	$(call BuildFirmware/GENERIC_8M,$(1),rt-n13u,RT-N13U,ttyS1,57600,phys)
-endef
-
-mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware)
-kernel_size_nw718=917504
-rootfs_size_nw718=2883584
-cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718))
-define BuildFirmware/NW718
-	$(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718),ARA1B4NCRNW718;1,factory.bin)
-	$(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718))
-endef
-
-mtdlayout_omniembhpm=192k(u-boot)ro,64k(config)ro,64k(factory)ro,1024k(kernel),15040k(rootfs),16064k@0x50000(firmware)
-kernel_size_omniembhpm=1048576
-rootfs_size_omniembhpm=15400960
-define BuildFirmware/OMNIEMBHPM
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/spi,$(mtdlayout_omniembhpm)),$(kernel_size_omniembhpm),$(rootfs_size_omniembhpm))
-endef
-
-define BuildFirmware/OMNIEMBHPM/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/spi,$(mtdlayout_omniembhpm)))
-endef
-
-mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_rtg32b1_kernel_part_size=917504
-mtd_rtg32b1_rootfs_part_size=2949120
-define BuildFirmware/RTG32B1
-	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
-endef
-
-mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_rtn10plus_kernel_part_size=917504
-mtd_rtn10plus_rootfs_part_size=2949120
-define BuildFirmware/RTN10PLUS
-	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
-endef
-
-define BuildFirmware/Seama
-	$(call PatchKernelLzma,$(2),$(3))
-	if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt $(4) ]; then \
-		echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \
-	else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(5) ]; then \
-		echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
+# build Seama header images
+define BuildFirmware/Seama/squashfs
+	$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
+	cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
+	if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt 8060864 ]; then \
+		echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
 	else \
+		dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
 		( \
-			dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=$(4) count=1 conv=sync; \
-		) > $(KDIR)/vmlinux-$(2).tmp; \
-		$(STAGING_DIR_HOST)/bin/seama \
-			-i $(KDIR)/vmlinux-$(2).tmp \
-			-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
-		( \
-			dd if=$(KDIR)/vmlinux-$(2).tmp.seama; \
-			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-		) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
-		( \
-			dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=$(4) count=1 conv=sync; \
+			dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
 			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
 		) > $(KDIR)/vmlinux-$(2).tmp; \
 		$(STAGING_DIR_HOST)/bin/seama \
@@ -342,121 +169,59 @@ define BuildFirmware/Seama
 			-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
 		$(STAGING_DIR_HOST)/bin/seama \
 			-s $(call imgname,$(1),$(2))-factory.bin \
-			-m "signature=$(6)" \
+			-m "signature=$(4)" \
 			-i $(KDIR)/vmlinux-$(2).tmp.seama; \
-	fi; fi
-endef
-
-mtdlayout_dir645a1=192k(u-boot)ro,16k(u-boot-env)ro,16k(factory)ro,32k(nvram)ro,64k(devdata)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
-define BuildFirmware/DIR645
-	$(call BuildFirmware/Seama,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir645a1)),917440,7143424,$(7))
+	fi
 endef
+BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
 
-define BuildFirmware/DIR645/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_dir645a1)))
+# sign Buffalo images
+define BuildFirmware/Buffalo
+	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+		buffalo-enc -p $(3) -v 1.76 \
+			-i $(KDIR)/vmlinux-$(2).uImage \
+			-o $(KDIR)/vmlinux-$(2).uImage.enc; \
+		buffalo-enc -p $(3) -v 1.76 \
+			-i $(KDIR)/root.$(1) \
+			-o $(KDIR)/root.$(2).enc; \
+		buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
+			-l mlang8 -f 1 -r EU \
+			-i $(KDIR)/vmlinux-$(2).uImage.enc \
+			-i $(KDIR)/root.$(2).enc \
+			-o $(call imgname,$(1),$(2))-factory-EU.bin; \
+	fi
 endef
 
-define BuildFirmware/UMedia
-	$(call BuildFirmware/GENERIC_8M,$(1),$(2),$(3),ttyS1,57600,phys)
+# sign trednet / UMedia images
+define BuildFirmware/UMedia/squashfs
+	$(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3))
 	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
 		fix-u-media-header -T 0x46 -B $(4) \
 			-i $(call sysupname,$(1),$(2)) \
 			-o $(call imgname,$(1),$(2))-factory.bin; \
 	fi
 endef
+BuildFirmware/UMedia/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
 
-define BuildFirmware/UMedia/initramfs
-	$(call BuildFirmware/GENERIC_8M/initramfs,$(1),$(2),$(3),ttyS1,57600,phys)
-endef
-
-mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
-define BuildFirmware/WHRG300N
-	$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
-	$(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088)
-	( \
-		echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
-			dd bs=512 count=1 conv=sync; \
-		dd if=$(call sysupname,$(1),whr-g300n); \
-	) > $(KDIR)/whr-g300n-tftp.tmp
-	buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-		-o $(call imgname,$(1),whr-g300n)-tftp.bin
-endef
-
-mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
-kernel_size_wl341v3=917504
-rootfs_size_wl341v3=2949120
-define BuildFirmware/WL341V3
-	$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3))
-	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
-		( \
-			dd if=/dev/zero bs=195936 count=1; \
-			echo "1.01"; \
-			dd if=/dev/zero bs=581 count=1; \
-			echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
-			dd if=/dev/zero bs=65552 count=1; \
-			dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
-			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
-			dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
-			echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
-		) > $(call imgname,$(1),$(2))-factory.bin; \
-	fi
-endef
-
-mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware)
-define BuildFirmware/WLITX4AG300N
-	$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584)
-endef
-
-mtdlayout_mzkw300nh2=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2816k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
-kernel_size_mzkw300nh2=851968
-rootfs_size_mzkw300nh2=2883584
-define BuildFirmware/MZKW300NH2
-	$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_mzkw300nh2)),$(kernel_size_mzkw300nh2),$(rootfs_size_mzkw300nh2))
-	$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,`expr $(kernel_size_mzkw300nh2) - 20`,$(KDIR)/root.$(1),$(rootfs_size_mzkw300nh2),$(call imgname,$(1),$(2))-factory.bin)
-	-mkedimaximg -i $(call imgname,$(1),$(2))-factory.bin \
-		-o $(call imgname,$(1),$(2))-factory.bin \
-		-s CSYS -m RN52 -f 0x50000 -S 0xc0000;
-endef
-
-define BuildFirmware/MZKW300NH2/initramfs
-	$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_mzkw300nh2)))
-endef
-
-#
-# Templates
-#
-define Image/Build/Template/initramfs/initramfs
-	$(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
-endef
 
-define Image/Build/Template/squashfs-only/squashfs
-	$(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
-endef
 
 #
 # RT288X Profiles
 #
-define Image/Build/Profile/F5D8235V1
-	$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1)
-endef
 
-define Image/Build/Profile/BR6524N
-	$(call Image/Build/Template/$(fs_squash)/$(1),BR6524N,br6524n,BR6524N,ttyS1,57600,phys)
-endef
+# 0x790000
+belkin_f5d8235v1_mtd_size=7929856
+Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
 
-define Image/Build/Profile/RTN15
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys)
-endef
+Image/Build/Profile/BR6524N=$(call BuildFirmware/Edimax/$(1),$(1),br6524n,BR6524N,$(ralink_default_fw_size_4M),CSYS,WNRA,0x50000,0xc0000)
 
-define Image/Build/Profile/V11STFE
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys)
-endef
+Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RTN15)
 
-define Image/Build/Profile/WLITX4AG300N
-	$(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N)
-endef
+Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE)
+
+Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N)
 
-ifeq ($(CONFIG_RALINK_RT288X),y)
+ifeq ($(SUBTARGET),rt288x)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/F5D8235V1,$(1))
 	$(call Image/Build/Profile/BR6524N,$(1))
@@ -466,190 +231,170 @@ define Image/Build/Profile/Default
 endef
 endif
 
+
+
 #
 # RT305X Profiles
 #
-define Image/Build/Profile/3G6200N
-	$(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
-endef
 
-define Image/Build/Profile/3G300M
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,3g300m,3G300M,ttyS1,57600,spi,3G150M_SPI Kernel Image,factory.bin)
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,3g300m,3G300M,ttyS1,57600,spi)
-endef
+edimax_3g6200n_mtd_size=3735552
+Image/Build/Profile/3G6200N=$(call BuildFirmware/CustomFlash/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size))
 
-define Image/Build/Profile/AIR3GII
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,air3gii,AIR3GII,ttyS1,57600,spi)
-endef
+Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
+
+Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
 
+define BuildFirmware/UIMAGE_8M
+	$(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7))
+endef
 define Image/Build/Profile/ALL02393G
-	$(call Image/Build/Template/$(fs_squash)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
+	$(call Image/Build/Template/$(image_type)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
 endef
 
-define Image/Build/Profile/ALL0256N
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,all0256n-8M,ALL0256N,ttyS1,57600,spi)
-endef
+Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0256n,ALL0256N)
 
-define Image/Build/Profile/ALL5002
-	$(call Image/Build/Template/$(fs_squash)/$(1),ALL5002,all5002,ALL5002,ttyS1,57600,spi)
-endef
+allnet_all5002_mtd_size=33226752
+Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size))
 
-define Image/Build/Profile/ARGUS_ATP52B
-	$(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B)
-endef
+argus_atp52b_mtd_size=7995392
+Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
 
-define Image/Build/Profile/BC2
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
-endef
+Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
 
-define Image/Build/Profile/BROADWAY
-	$(call Image/Build/Template/$(fs_squash)/$(1),BROADWAY,broadway,BROADWAY,ttyS1,57600,phys)
-endef
+broadway_mtd_size=7929856
+Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),broadway,BROADWAY,$(broadway_mtd_size),Broadway Kernel Image,factory)
 
-define Image/Build/Profile/CARAMBOLA
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,carambola,CARAMBOLA,ttyS1,115200,phys)
-endef
+Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA)
 
-define Image/Build/Profile/DIR300B1
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR620A1,dir-620-a1,DIR-620-A1)
+define BuildFirmware/DIR300B1/squashfs
+	$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
+	-mkwrgimg -s $(4) -d /dev/mtdblock/2 \
+		-i $(call sysupname,$(1),$(2)) \
+		-o $(call imgname,$(1),$(2))-factory.bin
 endef
+BuildFirmware/DIR300B1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
+Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
+Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
+Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
 
-define Image/Build/Profile/DIR615H1
-        $(call Image/Build/Template/$(fs_squash)/$(1),DIR615H1,dir-615-h1,DIR-615-H1,ttyS1,57600,spi)
-endef
+Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1)
 
-define Image/Build/Profile/DAP1350
-	$(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
+define BuildFirmware/DIR615H1/squashfs
+	$(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1)
+	-mkdir615h1 -e $(call sysupname,$(1),dir-615-h1) \
+		-o $(call imgname,$(1),dir-615-h1)-factory.bin
 endef
+BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1)
+Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1))
 
-define Image/Build/Profile/ESR9753
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys)
+dap1350_mtd_size=7667712
+define BuildFirmware/DAP1350/squashfs
+	$(call BuildFirmware/CustomFlash/$(1),$(1),dap-1350,DAP-1350,$(dap1350_mtd_size))
+	-mkdapimg -s $(4) \
+		-i $(call sysupname,$(1),dap-1350) \
+		-o $(call imgname,$(1),dap-1350)-factory.bin
 endef
+BuildFirmware/DAP1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dap-1350,DAP-1350)
+Image/Build/Profile/DAP1350=$(call BuildFirmware/DAP1350/$(1),$(1),)
 
-define Image/Build/Profile/HW5503G
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys)
-endef
+Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
 
-define Image/Build/Profile/F5D8235V2
-	$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2)
-endef
+Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
 
-define Image/Build/Profile/FONERA20N
-	$(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N)
-endef
+belkin_f5d8235v2_mtd_size=7929856
+Image/Build/Profile/F5D8235V2=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v2,F5D8235_V2,$(belkin_f5d8235v2_mtd_size))
 
-define Image/Build/Profile/RT-N13U
-	$(call Image/Build/Template/$(fs_squash)/$(1),RT-N13U)
-endef
+Image/Build/Profile/FONERA20N=$(call BuildFirmware/Edimax/$(1),$(1),fonera20n,FONERA20N,$(ralink_default_fw_size_8M),RSDK,NL1T,0x50000,0xc0000)
 
-define Image/Build/Profile/FREESTATION5
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,freestation5,FREESTATION5,ttyS1,115200,phys)
-endef
+Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U)
 
-define Image/Build/Profile/MOFI35003GN
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys)
-endef
+Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
 
-define Image/Build/Profile/NBG419N
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG-419N,ttyS1,57600,phys)
-endef
+Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
 
-define Image/Build/Profile/MZKW3000NH2
-	$(call Image/Build/Template/$(fs_squash)/$(1),MZKW300NH2,mzk-w300nh2,MZK-W300NH2,ttyS1,57600,phys)
-endef
+Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
 
-define Image/Build/Profile/NW718
-	$(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718)
-endef
+Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
 
-define Image/Build/Profile/OMNIEMB
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys)
-endef
+nw718_mtd_size=3801088
+Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
 
-define Image/Build/Profile/PSR680W
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,psr-680w,PSR-680W,ttyS1,115200,phys)
-endef
+Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
 
-define Image/Build/Profile/PWH2004
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys)
-endef
+Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
 
-define Image/Build/Profile/RTG32B1
-	$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
-endef
+Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004)
 
-define Image/Build/Profile/RTN10PLUS
-	$(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
-endef
+Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1)
 
-define Image/Build/Profile/SLR7205
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
-endef
+Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS)
 
-define Image/Build/Profile/V22RW2X2
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
-endef
+Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205)
 
-define Image/Build/Profile/W306R_V20
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys,linkn Kernel Image,factory.bin)
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
-endef
+Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2)
 
-define Image/Build/Profile/W502U
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
-endef
+Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory)
 
-define Image/Build/Profile/WCR150GN
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys)
-endef
+Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
 
-define Image/Build/Profile/WHRG300N
-	$(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N)
-endef
+Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
 
-define Image/Build/Profile/WL_330N
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi)
+buffalo_whrg300n_mtd_size=3801088
+define BuildFirmware/WHRG300N/squashfs
+	$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
+	# the following line has a bad argument 3 ... the old Makefile was already broken	
+	$(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n)
+	( \
+		echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
+			dd bs=512 count=1 conv=sync; \
+		dd if=$(call sysupname,$(1),whr-g300n); \
+	) > $(KDIR)/whr-g300n-tftp.tmp
+	buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
+		-o $(call imgname,$(1),whr-g300n)-tftp.bin
 endef
+BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N)
+Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
 
-define Image/Build/Profile/WL_330N3G
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi)
-endef
+Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N)
 
-define Image/Build/Profile/WL341V3
-	$(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3)
-endef
+Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G)
 
-define Image/Build/Profile/WL351
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys)
+kernel_size_wl341v3=917504
+rootfs_size_wl341v3=2949120
+define BuildFirmware/WL341V3/squashfs
+	$(call BuildFirmware/Default4M/$(1),$(1),wl341v3,WL341V3)
+	# This code looks broken and really needs to be converted to C
+	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+		( \
+			dd if=/dev/zero bs=195936 count=1; \
+			echo "1.01"; \
+			dd if=/dev/zero bs=581 count=1; \
+			echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
+			dd if=/dev/zero bs=65552 count=1; \
+			dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
+			dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+			dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
+			echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
+		) > $(call imgname,$(1),$(2))-factory.bin; \
+	fi
 endef
+BuildFirmware/WL341V3/initramfs=$(call BuildFirmware/OF/initramfs,$(1),wl341v3,WL341V3)
+Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1))
 
-define Image/Build/Profile/WR5123GN
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys)
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
-endef
+Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351)
 
-define Image/Build/Profile/UPVEL_326
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,ur-326n4g,UR-326N4G,ttyS1,57600,phys)
-endef
+Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
 
-define Image/Build/Profile/UPVEL
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,ur-336un,UR-336UN,ttyS1,57600,phys)
-endef
+Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
 
-define Image/Build/Profile/WR6202
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
-endef
+Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN)
 
-define Image/Build/Profile/XDXRN502J
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys)
-endef
+Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202)
+
+Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J)
 
-ifeq ($(CONFIG_RALINK_RT305X),y)
+ifeq ($(SUBTARGET),rt305x)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/3G6200N,$(1))
 	$(call Image/Build/Profile/3G300M,$(1))
@@ -661,27 +406,31 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/BC2,$(1))
 	$(call Image/Build/Profile/BROADWAY,$(1))
 	$(call Image/Build/Profile/CARAMBOLA,$(1))
-	$(call Image/Build/Profile/DIR300B1,$(1))
+	$(call Image/Build/Profile/DIR-300-B1,$(1))
+	$(call Image/Build/Profile/DIR-600-B1,$(1))
+	$(call Image/Build/Profile/DIR-600-B2,$(1))
+	$(call Image/Build/Profile/DIR-615-D,$(1))
+	$(call Image/Build/Profile/DIR-620-A1,$(1))
 	$(call Image/Build/Profile/DIR615H1,$(1))
 	$(call Image/Build/Profile/DAP1350,$(1))
-	$(call Image/Build/Profile/ESR9753,$(1))
+	$(call Image/Build/Profile/ESR-9753,$(1))
 	$(call Image/Build/Profile/F5D8235V2,$(1))
-	$(call Image/Build/Profile/RTN10PLUS,$(1))
 	$(call Image/Build/Profile/FONERA20N,$(1))
-	$(call Image/Build/Profile/RT-N13U,$(1))
 	$(call Image/Build/Profile/FREESTATION5,$(1))
-	$(call Image/Build/Profile/HW5503G,$(1))
-	$(call Image/Build/Profile/MOFI35003GN,$(1))
-	$(call Image/Build/Profile/MZKW3000NH2,$(1))
-	$(call Image/Build/Profile/NBG419N,$(1))
+	$(call Image/Build/Profile/HW550-3G,$(1))
+	$(call Image/Build/Profile/MOFI3500-3GN,$(1))
+	$(call Image/Build/Profile/MZKW300NH2,$(1))
+	$(call Image/Build/Profile/NBG-419N,$(1))
 	$(call Image/Build/Profile/NW718,$(1))
-	$(call Image/Build/Profile/OMNIEMB,$(1))
-	$(call Image/Build/Profile/UPVEL_326,$(1))
-	$(call Image/Build/Profile/PSR680W,$(1))
+	$(call Image/Build/Profile/OMNI-EMB,$(1))
+	$(call Image/Build/Profile/PSR-680W,$(1))
 	$(call Image/Build/Profile/PWH2004,$(1))
 	$(call Image/Build/Profile/RTG32B1,$(1))
-	$(call Image/Build/Profile/SLR7205,$(1))
-	$(call Image/Build/Profile/V22RW2X2,$(1))
+	$(call Image/Build/Profile/RTN10PLUS,$(1))
+	$(call Image/Build/Profile/RT-N13U,$(1))
+	$(call Image/Build/Profile/SL-R7205,$(1))
+	$(call Image/Build/Profile/UR-326N4G,$(1))
+	$(call Image/Build/Profile/V22RW-2X2,$(1))
 	$(call Image/Build/Profile/W306R_V20,$(1))
 	$(call Image/Build/Profile/W502U,$(1))
 	$(call Image/Build/Profile/WCR150GN,$(1))
@@ -689,37 +438,30 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WL_330N,$(1))
 	$(call Image/Build/Profile/WL_330N3G,$(1))
 	$(call Image/Build/Profile/WL341V3,$(1))
-	$(call Image/Build/Profile/WL351,$(1))
-	$(call Image/Build/Profile/WR5123GN,$(1))
+	$(call Image/Build/Profile/WL-351,$(1))
+	$(call Image/Build/Profile/WR512-3GN,$(1))
 	$(call Image/Build/Profile/WR6202,$(1))
 	$(call Image/Build/Profile/XDXRN502J,$(1))
 endef
 endif
 
+
+
 #
 # RT3662/RT3883 Profiles
 #
-define Image/Build/Profile/DIR645
-	$(call Image/Build/Template/$(fs_squash)/$(1),DIR645,dir-645,DIR-645,ttyS1,57600,spi,wrgn39_dlob.hans_dir645)
-endef
+Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645)
 
-define Image/Build/Profile/OMNIEMBHPM
-	$(call Image/Build/Template/$(fs_squash)/$(1),OMNIEMBHPM,omni-emb-hpm,OMNI-EMB-HPM)
-endef
+omniembhpm_mtd_size=16449536
+Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
 
-define Image/Build/Profile/RTN56U
-	$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,rt-n56u,RT-N56U,ttyS1,57600,phys)
-endef
+Image/Build/Profile/RTN56U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
 
-define Image/Build/Profile/TEW691GR
-	$(call Image/Build/Template/$(fs_squash)/$(1),UMedia,tew-691gr,TEW-691GR,0x026910)
-endef
+Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910)
 
-define Image/Build/Profile/TEW692GR
-	$(call Image/Build/Template/$(fs_squash)/$(1),UMedia,tew-692gr,TEW-692GR,0x026920)
-endef
+#Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920)
 
-ifeq ($(CONFIG_RALINK_RT3883),y)
+ifeq ($(SUBTARGET),rt3883)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR645,$(1))
 	$(call Image/Build/Profile/OMNIEMBHPM,$(1))
@@ -729,14 +471,23 @@ define Image/Build/Profile/Default
 endef
 endif
 
-define Image/Build/Initramfs
-	$(call Image/Build/Profile/$(PROFILE),initramfs)
-endef
 
+#
+# Generic Targets
+#
 define Image/Build/squashfs
 	$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
 endef
 
+define Image/BuildKernel
+	cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
+	cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
+	$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
+	$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
+	cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
+	$(call Image/Build/Initramfs)
+endef
+
 define Image/Build
 	$(call Image/Build/$(1))
 	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync