ramips: fix Zbtlink ZBT-WR8305RT board name

There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46614

7 files changed, 17 insertions, 17 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index c6bfd7e..bb990c9 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -245,10 +245,10 @@ case $board in
 		ucidef_set_led_default "power" "power" "oy:green:power" "1"
 		set_wifi_led "oy:green:wifi"
 		;;
-	wr8305rt)
-		ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
-		set_usb_led "wr8305rt:usb"
-		set_wifi_led "wr8305rt:wifi"
+	zbt-wr8305rt)
+		ucidef_set_led_default "power" "power" "zbt-wr8305rt:sys" "1"
+		set_usb_led "zbt-wr8305rt:usb"
+		set_wifi_led "zbt-wr8305rt:wifi"
 		;;
 	wt1520)
 		set_wifi_led "rt2800pci-phy0::radio"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index da1854a..42447d4 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -228,7 +228,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "6t"
 		;;
 
-	wr8305rt)
+	zbt-wr8305rt)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
 		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index e63f0df..019bbbb 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -196,8 +196,8 @@ get_status_led() {
 	wr512-3gn)
 		status_led="wr512:green:wps"
 		;;
-	wr8305rt)
-		status_led="wr8305rt:sys"
+	zbt-wr8305rt)
+		status_led="zbt-wr8305rt:sys"
 		;;
 	whr-300hp2 | \
 	whr-600d | \
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 7db6d37..436ed09 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -406,8 +406,8 @@ ramips_board_detect() {
 	*"OY-0001")
 		name="oy-0001"
 		;;
-	*"ZBT WR8305RT")
-		name="wr8305rt"
+	*"Zbtlink ZBT-WR8305RT")
+		name="zbt-wr8305rt"
 		;;
 	*"ZTE Q7")
 		name="zte-q7"
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8221997..1021123 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -116,7 +116,7 @@ platform_check_image() {
 	wnce2001 | \
 	wr512-3gn |\
 	wr6202 |\
-	wr8305rt |\
+	zbt-wr8305rt |\
 	wrtnode |\
 	oy-0001 |\
 	wt1520 |\
diff --git a/target/linux/ramips/dts/WR8305RT.dts b/target/linux/ramips/dts/ZBT-WR8305RT.dts
index 1f3c345..8c56c15 100644
--- a/target/linux/ramips/dts/WR8305RT.dts
+++ b/target/linux/ramips/dts/ZBT-WR8305RT.dts
@@ -3,8 +3,8 @@
 /include/ "mt7620n.dtsi"
 
 / {
-	compatible = "wr8305rt", "ralink,mt7620n-soc";
-	model = "ZBT WR8305RT";
+	compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc";
+	model = "Zbtlink ZBT-WR8305RT";
 
 	palmbus@10000000 {
 		gpio1: gpio@638 {
@@ -87,17 +87,17 @@
 		compatible = "gpio-leds";
 
 		sys {
-			label = "wr8305rt:sys";
+			label = "zbt-wr8305rt:sys";
 			gpios = <&gpio1 14 1>;
 		};
 
 		lan {
-			label = "wr8305rt:usb";
+			label = "zbt-wr8305rt:usb";
 			gpios = <&gpio1 15 1>;
 		};
 
 		wifi {
-			label = "wr8305rt:wifi";
+			label = "zbt-wr8305rt:wifi";
 			gpios = <&gpio3 0 1>;
 		};
 	};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 409ff26..6071ae7 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -876,12 +876,12 @@ Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW2
 Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
 Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
 Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
-Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
 Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
 Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
 Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
 Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
+Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT)
 Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
 microwrt_mtd_size=16515072
 Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
@@ -910,12 +910,12 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/MLWG2,$(1))
 	$(call Image/Build/Profile/WMR300,$(1))
 	$(call Image/Build/Profile/RT-N14U,$(1))
-	$(call Image/Build/Profile/WR8305RT,$(1))
 	$(call Image/Build/Profile/WRTNODE,$(1))
 	$(call Image/Build/Profile/WT3020,$(1))
 	$(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
 	$(call Image/Build/Profile/ZTE-Q7,$(1))
 	$(call Image/Build/Profile/ZBT-WA05,$(1))
+	$(call Image/Build/Profile/ZBT-WR8305RT,$(1))
 	$(call Image/Build/Profile/ArcherC20i,$(1))
 	$(call Image/Build/Profile/MicroWRT,$(1))
 endef