summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-03-10 19:11:57 +0000
committerJohn Crispin <john@openwrt.org>2016-03-10 19:11:57 +0000
commit96ee39b184a3863bba1cc42efc5bbd34495d20ff (patch)
treee508c929f6adce21d280ac6599c091c4a21a39e0 /target
parent70a5c062f10a63087bd3225454145c3b528a7818 (diff)
downloadmtk-20170518-96ee39b184a3863bba1cc42efc5bbd34495d20ff.zip
mtk-20170518-96ee39b184a3863bba1cc42efc5bbd34495d20ff.tar.gz
mtk-20170518-96ee39b184a3863bba1cc42efc5bbd34495d20ff.tar.bz2
ramips: Add support for GL-MT300A
This patches adds support for GL-MT300A. GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM, Two LANs, USB, UART and MMC daughter board. SVN-Revision: 48992
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/GL-MT300A.dts164
-rw-r--r--target/linux/ramips/image/Makefile2
-rw-r--r--target/linux/ramips/mt7620/profiles/gli.mk16
7 files changed, 190 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8fd50fe..536a363 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -137,6 +137,9 @@ fonera20n)
set_usb_led "$board:orange:usb"
set_wifi_led "$board:orange:wifi"
;;
+gl-mt300a)
+ set_wifi_led "$board:wlan"
+ ;;
hc5661)
ucidef_set_led_default "system" "system" "$board:blue:system" "1"
ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ac5a312..74599ad 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -113,6 +113,7 @@ ramips_setup_interfaces()
dir-860l-b1|\
f5d8235-v1|\
f5d8235-v2|\
+ gl-mt300a|\
hg255d|\
mzk-wdpr|\
jhr-n805r|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3fdb562..ba27c14 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -175,6 +175,9 @@ ramips_board_detect() {
*"FreeStation5")
name="freestation5"
;;
+ *"GL-MT300A")
+ name="gl-mt300a"
+ ;;
*"HC5661")
name="hc5661"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e01f9ce..876416e 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -56,6 +56,7 @@ platform_check_image() {
firewrt|\
fonera20n|\
freestation5|\
+ gl-mt300a|\
hc5*61|\
hg255d|\
hlk-rm04|\
diff --git a/target/linux/ramips/dts/GL-MT300A.dts b/target/linux/ramips/dts/GL-MT300A.dts
new file mode 100644
index 0000000..c1eb0a9
--- /dev/null
+++ b/target/linux/ramips/dts/GL-MT300A.dts
@@ -0,0 +1,164 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "GL-MT300A", "ralink,mt7620a-soc";
+ model = "GL-MT300A";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+ };
+
+ sdhci@10130000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4000>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wled","ephy","uartf","i2c";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wan {
+ label = "gl-mt300a:wan";
+ gpios = <&gpio2 0 1>;
+ };
+
+ lan {
+ label = "gl-mt300a:lan";
+ gpios = <&gpio2 1 1>;
+ };
+
+ wlan {
+ label = "gl-mt300a:wlan";
+ gpios = <&gpio3 0 1>;
+ };
+
+ usb {
+ label = "gl-mt300a:usb";
+ gpios = <&gpio0 7 1>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 1>;
+ linux,code = <0x198>;
+ };
+
+ BTN_0 {
+ label = "BTN_0";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x100>;
+ };
+
+ BTN_1 {
+ label = "BTN_1";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x101>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index e85c574..fb7407b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -993,6 +993,7 @@ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
+Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A)
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
@@ -1036,6 +1037,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WRTNODE,$(1))
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/MIWIFI-MINI,$(1))
+ $(call Image/Build/Profile/GL-MT300A,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
$(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk
new file mode 100644
index 0000000..53e2e9d
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/gli.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/GL-MT300A
+ NAME:=GL-MT300A
+ PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76
+endef
+
+define Profile/GL-MT300A/Description
+ Support for gl-mt300a Router
+endef
+$(eval $(call Profile,GL-MT300A))