summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2011-12-15 22:25:38 +0000
committerGabor Juhos <juhosg@openwrt.org>2011-12-15 22:25:38 +0000
commit67c7980290d77042de0157d7611da5a23cd643a3 (patch)
tree8697a7886d715f08c842c1a8c8ba7c77b02ab163 /target
parent5bbd416e38cf6e0db31bb064068a43ab046a0684 (diff)
downloadmtk-20170518-67c7980290d77042de0157d7611da5a23cd643a3.zip
mtk-20170518-67c7980290d77042de0157d7611da5a23cd643a3.tar.gz
mtk-20170518-67c7980290d77042de0157d7611da5a23cd643a3.tar.bz2
ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0 to the PHY4 of the internal switch for now. This allows to use the DB120 board as a router with 4LAN+1WAN ports. SVN-Revision: 29557
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/uci-defaults/network6
-rw-r--r--target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c30
2 files changed, 35 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network
index f9419b9..c35df46 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network
@@ -19,6 +19,12 @@ all0258n)
ucidef_set_interface_lan "eth0 eth1"
;;
+db120)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ;;
+
dir-825-b1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "rtl8366s" "1" "1"
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c
index 1d59f74..3a95fa2 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c
@@ -2,6 +2,7 @@
* Atheros DB120 board (WASP SoC) support
*
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -10,6 +11,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
#include <asm/mach-ar71xx/ar71xx.h>
@@ -112,6 +114,21 @@ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
}
};
+static void __init db120_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
+ t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
+ AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
+ __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
static void __init db120_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -129,14 +146,25 @@ static void __init db120_setup(void)
ARRAY_SIZE(db120_gpio_keys),
db120_gpio_keys);
+ db120_gmac_setup();
+
ar71xx_add_device_mdio(0, 0x0);
ar71xx_add_device_mdio(1, 0x0);
- /* GMAC0 is connected to an AR8327 switch */
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
+#if 0
+ /* GMAC0 is connected to an AR8327 switch */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
+#else
+ /* GMAC0 is connected to PHY4 of the internal switch */
+ ar71xx_switch_data.phy4_mii_en = 1;
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = BIT(4);
+ ar71xx_eth0_data.mii_bus_dev = &ar71xx_mdio1_device.dev;
+#endif
ar71xx_add_device_eth(0);