summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-09-12 06:50:46 +0000
committerJohn Crispin <john@openwrt.org>2014-09-12 06:50:46 +0000
commit17cf9c45934fe054b945aa00757d1f9509de68be (patch)
tree97544f271aea1dd03fa66a6b04a9555c5096c0d6 /target
parente2864e9990e2bbc511e7f767ac7c264530471aa9 (diff)
downloadmtk-20170518-17cf9c45934fe054b945aa00757d1f9509de68be.zip
mtk-20170518-17cf9c45934fe054b945aa00757d1f9509de68be.tar.gz
mtk-20170518-17cf9c45934fe054b945aa00757d1f9509de68be.tar.bz2
ralink: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42481
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/mt7620a/config-3.10180
-rw-r--r--target/linux/ramips/mt7620n/config-3.10171
-rw-r--r--target/linux/ramips/mt7621/config-3.10238
-rw-r--r--target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch39
-rw-r--r--target/linux/ramips/patches-3.10/0002-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch105
-rw-r--r--target/linux/ramips/patches-3.10/0003-DT-Add-documentation-for-rt2880-wdt.patch39
-rw-r--r--target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch254
-rw-r--r--target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch59
-rw-r--r--target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch431
-rw-r--r--target/linux/ramips/patches-3.10/0009-MIPS-ralink-add-support-for-reset-controller-API.patch126
-rw-r--r--target/linux/ramips/patches-3.10/0010-MIPS-ralink-add-support-for-periodic-timer-irq.patch213
-rw-r--r--target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch192
-rw-r--r--target/linux/ramips/patches-3.10/0012-MIPS-ralink-probe-clocksources-from-OF.patch21
-rw-r--r--target/linux/ramips/patches-3.10/0013-MIPS-ralink-mt7620-add-verbose-ram-info.patch34
-rw-r--r--target/linux/ramips/patches-3.10/0014-MIPS-ralink-mt7620-add-spi-clock-definition.patch22
-rw-r--r--target/linux/ramips/patches-3.10/0015-MIPS-ralink-mt7620-add-wdt-clock-definition.patch22
-rw-r--r--target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch63
-rw-r--r--target/linux/ramips/patches-3.10/0017-MIPS-ralink-mt7620-this-SoC-has-ehci-and-ohci-hosts.patch23
-rw-r--r--target/linux/ramips/patches-3.10/0018-DT-Add-documentation-for-spi-rt2880.patch44
-rw-r--r--target/linux/ramips/patches-3.10/0019-SPI-ralink-add-Ralink-SoC-spi-driver.patch476
-rw-r--r--target/linux/ramips/patches-3.10/0020-MIPS-ralink-update-dts-files.patch629
-rw-r--r--target/linux/ramips/patches-3.10/0021-MIPS-ralink-add-cpu-frequency-scaling.patch95
-rw-r--r--target/linux/ramips/patches-3.10/0022-MIPS-add-driver-for-the-built-in-PCI-controller-of-the-RT3883-SoC.patch901
-rw-r--r--target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch80
-rw-r--r--target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch59
-rw-r--r--target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch75
-rw-r--r--target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch113
-rw-r--r--target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch24
-rw-r--r--target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch25
-rw-r--r--target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch66
-rw-r--r--target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch45
-rw-r--r--target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch26
-rw-r--r--target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch301
-rw-r--r--target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch23
-rw-r--r--target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch662
-rw-r--r--target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch711
-rw-r--r--target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch1311
-rw-r--r--target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch319
-rw-r--r--target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch399
-rw-r--r--target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch54
-rw-r--r--target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch76
-rw-r--r--target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch5063
-rw-r--r--target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch230
-rw-r--r--target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch174
-rw-r--r--target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch24517
-rw-r--r--target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch23
-rw-r--r--target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch22
-rw-r--r--target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch27
-rw-r--r--target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch345
-rw-r--r--target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch29
-rw-r--r--target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch3433
-rw-r--r--target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch29
-rw-r--r--target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch70
-rw-r--r--target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch2408
-rw-r--r--target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch161
-rw-r--r--target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch325
-rw-r--r--target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch246
-rw-r--r--target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch13
-rw-r--r--target/linux/ramips/patches-3.10/0135-mtd-add-rtn56u-support.patch28
-rw-r--r--target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch60
-rw-r--r--target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch44
-rw-r--r--target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch52
-rw-r--r--target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch84
-rw-r--r--target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch60
-rw-r--r--target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch101
-rw-r--r--target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch723
-rw-r--r--target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch211
-rw-r--r--target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch300
-rw-r--r--target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch37
-rw-r--r--target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch822
-rw-r--r--target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch227
-rw-r--r--target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch236
-rw-r--r--target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch4419
-rw-r--r--target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch5814
-rw-r--r--target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch346
-rw-r--r--target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch6045
-rw-r--r--target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch86
-rw-r--r--target/linux/ramips/patches-3.10/0218-rt2880-add-wmac-clock.patch19
-rw-r--r--target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch22
-rw-r--r--target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch31
-rw-r--r--target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch368
-rw-r--r--target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch52
-rw-r--r--target/linux/ramips/patches-3.10/0400-MIPS-ralink-define-clock-for-wmac-on-rt3883.patch10
-rw-r--r--target/linux/ramips/patches-3.10/0401-mt7620n-add-wmac-clock.patch27
-rw-r--r--target/linux/ramips/rt288x/config-3.10166
-rw-r--r--target/linux/ramips/rt305x/config-3.10169
-rw-r--r--target/linux/ramips/rt3883/config-3.10179
87 files changed, 0 insertions, 66599 deletions
diff --git a/target/linux/ramips/mt7620a/config-3.10 b/target/linux/ramips/mt7620a/config-3.10
deleted file mode 100644
index 1a9889e..0000000
--- a/target/linux/ramips/mt7620a/config-3.10
+++ /dev/null
@@ -1,180 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-# CONFIG_CLKEVT_RT3352 is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_WORK=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND_MT7620=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK=y
-CONFIG_NET_RALINK_GSW_MT7620=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_USBPHY=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SAMSUNG_USBPHY is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7620n/config-3.10 b/target/linux/ramips/mt7620n/config-3.10
deleted file mode 100644
index 44d991b..0000000
--- a/target/linux/ramips/mt7620n/config-3.10
+++ /dev/null
@@ -1,171 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-# CONFIG_CLKEVT_RT3352 is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7620A_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_NAND_MT7620 is not set
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK=y
-CONFIG_NET_RALINK_GSW_MT7620=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NLS=m
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PCI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_GDMA=y
-CONFIG_RALINK_USBPHY=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SAMSUNG_USBPHY is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/mt7621/config-3.10 b/target/linux/ramips/mt7621/config-3.10
deleted file mode 100644
index 86bc7be..0000000
--- a/target/linux/ramips/mt7621/config-3.10
+++ /dev/null
@@ -1,238 +0,0 @@
-# CONFIG_32B_DESC is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CEVT_GIC is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_MT7621_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ESW_DOUBLE_VLAN_TAG=y
-# CONFIG_GE1_MII_AN is not set
-# CONFIG_GE1_MII_FORCE_100 is not set
-# CONFIG_GE1_RGMII_AN is not set
-CONFIG_GE1_RGMII_FORCE_1000=y
-# CONFIG_GE1_RGMII_NONE is not set
-# CONFIG_GE1_RVMII_FORCE_100 is not set
-# CONFIG_GE1_TRGMII_FORCE_1200 is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_GIC=y
-CONFIG_IRQ_WORK=y
-# CONFIG_LAN_WAN_SUPPORT is not set
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-CONFIG_MIPS_CMP=y
-CONFIG_MIPS_CPU_SCACHE=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=6
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT=y
-# CONFIG_MIPS_MT_DISABLED is not set
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_ASIC=y
-# CONFIG_MT7621_WDT is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_RALINK is not set
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_NR_CPUS_DEFAULT_2=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PDMA_NEW=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RAETH=y
-CONFIG_RAETH_CHECKSUM_OFFLOAD=y
-# CONFIG_RAETH_GMAC2 is not set
-# CONFIG_RAETH_HW_VLAN_RX is not set
-# CONFIG_RAETH_HW_VLAN_TX is not set
-# CONFIG_RAETH_LRO is not set
-# CONFIG_RAETH_NAPI is not set
-# CONFIG_RAETH_QDMA is not set
-CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y
-# CONFIG_RAETH_SKB_RECYCLE_2K is not set
-# CONFIG_RAETH_SPECIAL_TAG is not set
-# CONFIG_RAETH_TSO is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_MT7621=y
-CONFIG_RALINK_USBPHY=y
-# CONFIG_RALINK_WDT is not set
-CONFIG_RA_NAT_NONE=y
-# CONFIG_RA_NETWORK_TASKLET_BH is not set
-CONFIG_RA_NETWORK_WORKQUEUE_BH=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RT_3052_ESW=y
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SAMSUNG_USBPHY is not set
-CONFIG_SCHED_SMT=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-# CONFIG_SOC_MT7620 is not set
-CONFIG_SOC_MT7621=y
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS_CMP=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_MT7621_XHCI_PLATFORM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_USE_OF=y
-CONFIG_WAN_AT_P0=y
-# CONFIG_WAN_AT_P4 is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
deleted file mode 100644
index 4853348..0000000
--- a/target/linux/ramips/patches-3.10/0001-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d11f6e47eb748f27ba325bd843cc88bae3ad0e8a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 29 Jan 2013 21:11:55 +0100
-Subject: [PATCH 01/25] MTD: m25p80: allow loading mtd name from OF
-
-In accordance with the physmap flash we should honour the linux,mtd-name
-property when deciding what name the mtd device has.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/devices/m25p80.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -927,10 +927,13 @@ static int m25p_probe(struct spi_device
- unsigned i;
- struct mtd_part_parser_data ppdata;
- struct device_node __maybe_unused *np = spi->dev.of_node;
-+ const char __maybe_unused *of_mtd_name = NULL;
-
- #ifdef CONFIG_MTD_OF_PARTS
- if (!of_device_is_available(np))
- return -ENODEV;
-+ of_property_read_string(spi->dev.of_node,
-+ "linux,mtd-name", &of_mtd_name);
- #endif
-
- /* Platform data helps sort out which chip type we have, as
-@@ -1006,6 +1009,8 @@ static int m25p_probe(struct spi_device
-
- if (data && data->name)
- flash->mtd.name = data->name;
-+ else if (of_mtd_name)
-+ flash->mtd.name = of_mtd_name;
- else
- flash->mtd.name = dev_name(&spi->dev);
-
diff --git a/target/linux/ramips/patches-3.10/0002-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/ramips/patches-3.10/0002-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
deleted file mode 100644
index 6b0c143..0000000
--- a/target/linux/ramips/patches-3.10/0002-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 080f1a0c539180a88066fb004a8c31eefdf74161 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 18:47:27 +0200
-Subject: [PATCH 02/25] reset: Fix compile when reset RESET_CONTROLLER is not
- selected
-
-Drivers need to protect their reset api calls with #ifdef to avoid compile
-errors.
-
-This patch adds dummy wrappers in the same way that linux/of.h does it.
-
-Cc: linux-kernel@vger.kernel.org
-Cc: Philipp Zabel <p.zabel@pengutronix.de>
-Cc: Gabor Juhos <juhosg@openwrt.org>
----
- include/linux/reset-controller.h | 16 ++++++++++++++
- include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 59 insertions(+)
-
---- a/include/linux/reset-controller.h
-+++ b/include/linux/reset-controller.h
-@@ -45,7 +45,23 @@ struct reset_controller_dev {
- unsigned int nr_resets;
- };
-
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_controller_register(struct reset_controller_dev *rcdev);
- void reset_controller_unregister(struct reset_controller_dev *rcdev);
-
-+#else
-+
-+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
-+{
-+ return -ENOSYS;
-+}
-+
-+void reset_controller_unregister(struct reset_controller_dev *rcdev)
-+{
-+
-+}
-+
-+#endif
-+
- #endif
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -1,9 +1,13 @@
- #ifndef _LINUX_RESET_H_
- #define _LINUX_RESET_H_
-
-+#include <linux/err.h>
-+
- struct device;
- struct reset_control;
-
-+#if defined(CONFIG_RESET_CONTROLLER)
-+
- int reset_control_reset(struct reset_control *rstc);
- int reset_control_assert(struct reset_control *rstc);
- int reset_control_deassert(struct reset_control *rstc);
-@@ -14,4 +18,43 @@ struct reset_control *devm_reset_control
-
- int device_reset(struct device *dev);
-
-+#else /* CONFIG_RESET_CONTROLLER */
-+
-+static inline int reset_control_reset(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline int reset_control_assert(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline int reset_control_deassert(struct reset_control *rstc)
-+{
-+ return -ENOSYS;
-+}
-+
-+static inline struct reset_control *reset_control_get(struct device *dev, const char *id)
-+{
-+ return ERR_PTR(-ENOSYS);
-+}
-+
-+static inline void reset_control_put(struct reset_control *rstc)
-+{
-+
-+}
-+
-+static inline struct reset_control *devm_reset_control_get(struct device *dev, const char *id)
-+{
-+ return ERR_PTR(-ENOSYS);
-+}
-+
-+static inline int device_reset(struct device *dev)
-+{
-+ return -ENOSYS;
-+}
-+
-+#endif
-+
- #endif
diff --git a/target/linux/ramips/patches-3.10/0003-DT-Add-documentation-for-rt2880-wdt.patch b/target/linux/ramips/patches-3.10/0003-DT-Add-documentation-for-rt2880-wdt.patch
deleted file mode 100644
index ea00d3f..0000000
--- a/target/linux/ramips/patches-3.10/0003-DT-Add-documentation-for-rt2880-wdt.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 8b87087423057f8a06423702f3035634d6e8cd73 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:57:20 +0200
-Subject: [PATCH 03/25] DT: Add documentation for rt2880-wdt
-
-This document describes the binding of the watchdog core found ralink wireless
-SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-watchdog@vger.kernel.org
-Cc: linux-mips@linux-mips.org
-Cc: devicetree-discuss@lists.ozlabs.org
----
- .../devicetree/bindings/watchdog/rt2880-wdt.txt | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt
-@@ -0,0 +1,19 @@
-+Ralink Watchdog Timers
-+
-+Required properties :
-+- compatible: must be "ralink,rt2880-wdt"
-+- reg: physical base address of the controller and length of the register range
-+
-+Optional properties :
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts: Specify the INTC interrupt number
-+
-+Example:
-+
-+ watchdog@120 {
-+ compatible = "ralink,rt2880-wdt";
-+ reg = <0x120 0x10>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
diff --git a/target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch b/target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch
deleted file mode 100644
index 4b44d86..0000000
--- a/target/linux/ramips/patches-3.10/0004-watchdog-MIPS-add-ralink-watchdog-driver.patch
+++ /dev/null
@@ -1,254 +0,0 @@
-From 78046b68c1fc757162e32c83f59c3a94e794bf2e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:51:58 +0200
-Subject: [PATCH 04/25] watchdog: MIPS: add ralink watchdog driver
-
-Add a driver for the watchdog timer found on Ralink SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-watchdog@vger.kernel.org
-Cc: linux-mips@linux-mips.org
----
- drivers/watchdog/Kconfig | 7 ++
- drivers/watchdog/Makefile | 1 +
- drivers/watchdog/rt2880_wdt.c | 208 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 216 insertions(+)
- create mode 100644 drivers/watchdog/rt2880_wdt.c
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1113,6 +1113,13 @@ config LANTIQ_WDT
- help
- Hardware driver for the Lantiq SoC Watchdog Timer.
-
-+config RALINK_WDT
-+ tristate "Ralink SoC watchdog"
-+ select WATCHDOG_CORE
-+ depends on RALINK
-+ help
-+ Hardware driver for the Ralink SoC Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -135,6 +135,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
-
- # PARISC Architecture
-
---- /dev/null
-+++ b/drivers/watchdog/rt2880_wdt.c
-@@ -0,0 +1,208 @@
-+/*
-+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
-+ *
-+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * This driver was based on: drivers/watchdog/softdog.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/watchdog.h>
-+#include <linux/miscdevice.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define SYSC_RSTSTAT 0x38
-+#define WDT_RST_CAUSE BIT(1)
-+
-+#define RALINK_WDT_TIMEOUT 30
-+#define RALINK_WDT_PRESCALE 65536
-+
-+#define TIMER_REG_TMR1LOAD 0x00
-+#define TIMER_REG_TMR1CTL 0x08
-+
-+#define TMRSTAT_TMR1RST BIT(5)
-+
-+#define TMR1CTL_ENABLE BIT(7)
-+#define TMR1CTL_MODE_SHIFT 4
-+#define TMR1CTL_MODE_MASK 0x3
-+#define TMR1CTL_MODE_FREE_RUNNING 0x0
-+#define TMR1CTL_MODE_PERIODIC 0x1
-+#define TMR1CTL_MODE_TIMEOUT 0x2
-+#define TMR1CTL_MODE_WDT 0x3
-+#define TMR1CTL_PRESCALE_MASK 0xf
-+#define TMR1CTL_PRESCALE_65536 0xf
-+
-+static struct clk *rt288x_wdt_clk;
-+static unsigned long rt288x_wdt_freq;
-+static void __iomem *rt288x_wdt_base;
-+
-+static bool nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, bool, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+static inline void rt_wdt_w32(unsigned reg, u32 val)
-+{
-+ iowrite32(val, rt288x_wdt_base + reg);
-+}
-+
-+static inline u32 rt_wdt_r32(unsigned reg)
-+{
-+ return ioread32(rt288x_wdt_base + reg);
-+}
-+
-+static int rt288x_wdt_ping(struct watchdog_device *w)
-+{
-+ rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
-+
-+ return 0;
-+}
-+
-+static int rt288x_wdt_start(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
-+ TMR1CTL_PRESCALE_MASK);
-+ t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
-+ TMR1CTL_PRESCALE_65536);
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ rt288x_wdt_ping(w);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t |= TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int rt288x_wdt_stop(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ rt288x_wdt_ping(w);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t &= ~TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
-+{
-+ w->timeout = t;
-+ rt288x_wdt_ping(w);
-+
-+ return 0;
-+}
-+
-+static int rt288x_wdt_bootcause(void)
-+{
-+ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
-+ return WDIOF_CARDRESET;
-+
-+ return 0;
-+}
-+
-+static struct watchdog_info rt288x_wdt_info = {
-+ .identity = "Ralink Watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-+};
-+
-+static struct watchdog_ops rt288x_wdt_ops = {
-+ .owner = THIS_MODULE,
-+ .start = rt288x_wdt_start,
-+ .stop = rt288x_wdt_stop,
-+ .ping = rt288x_wdt_ping,
-+ .set_timeout = rt288x_wdt_set_timeout,
-+};
-+
-+static struct watchdog_device rt288x_wdt_dev = {
-+ .info = &rt288x_wdt_info,
-+ .ops = &rt288x_wdt_ops,
-+ .min_timeout = 1,
-+};
-+
-+static int rt288x_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int ret;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ rt288x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(rt288x_wdt_base))
-+ return PTR_ERR(rt288x_wdt_base);
-+
-+ rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(rt288x_wdt_clk))
-+ return PTR_ERR(rt288x_wdt_clk);
-+
-+ device_reset(&pdev->dev);
-+
-+ rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
-+
-+ rt288x_wdt_dev.dev = &pdev->dev;
-+ rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
-+
-+ rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
-+ rt288x_wdt_dev.timeout = rt288x_wdt_dev.max_timeout;
-+
-+ watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
-+
-+ ret = watchdog_register_device(&rt288x_wdt_dev);
-+ if (!ret)
-+ dev_info(&pdev->dev, "Initialized\n");
-+
-+ return 0;
-+}
-+
-+static int rt288x_wdt_remove(struct platform_device *pdev)
-+{
-+ watchdog_unregister_device(&rt288x_wdt_dev);
-+
-+ return 0;
-+}
-+
-+static void rt288x_wdt_shutdown(struct platform_device *pdev)
-+{
-+ rt288x_wdt_stop(&rt288x_wdt_dev);
-+}
-+
-+static const struct of_device_id rt288x_wdt_match[] = {
-+ { .compatible = "ralink,rt2880-wdt" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
-+
-+static struct platform_driver rt288x_wdt_driver = {
-+ .probe = rt288x_wdt_probe,
-+ .remove = rt288x_wdt_remove,
-+ .shutdown = rt288x_wdt_shutdown,
-+ .driver = {
-+ .name = KBUILD_MODNAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt288x_wdt_match,
-+ },
-+};
-+
-+module_platform_driver(rt288x_wdt_driver);
-+
-+MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index a6a6b69..0000000
--- a/target/linux/ramips/patches-3.10/0005-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From ad68c2865b360f1b637432b4cbcaaf101d2687b9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 05/25] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+ - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+ - first cell is the pin number
-+ - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+ SoC type. Register offsets need to be in this order.
-+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+
-+ reg = <0x600 0x34>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ };
diff --git a/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
deleted file mode 100644
index fd7f7f4..0000000
--- a/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ /dev/null
@@ -1,431 +0,0 @@
-From 55833373cf527dc94bc6c63b68d0f39591667a5d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 14:00:25 +0200
-Subject: [PATCH 06/25] GPIO: MIPS: ralink: add gpio driver for ralink SoC
-
-Add gpio driver for Ralink SoC. This driver makes the gpio core on
-RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- arch/mips/Kconfig | 1 +
- arch/mips/include/asm/mach-ralink/gpio.h | 24 +++
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-ralink.c | 337 ++++++++++++++++++++++++++++++
- 5 files changed, 369 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
- create mode 100644 drivers/gpio/gpio-ralink.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -444,6 +444,7 @@ config RALINK
- select SYS_HAS_EARLY_PRINTK
- select HAVE_MACH_CLKDEV
- select CLKDEV_LOOKUP
-+ select ARCH_REQUIRE_GPIOLIB
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
-@@ -0,0 +1,24 @@
-+/*
-+ * Ralink SoC GPIO API support
-+ *
-+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MACH_RALINK_GPIO_H
-+#define __ASM_MACH_RALINK_GPIO_H
-+
-+#define ARCH_NR_GPIOS 128
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value __gpio_get_value
-+#define gpio_set_value __gpio_set_value
-+#define gpio_cansleep __gpio_cansleep
-+#define gpio_to_irq __gpio_to_irq
-+
-+#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -209,6 +209,12 @@ config GPIO_RCAR
- help
- Say yes here to support GPIO on Renesas R-Car SoCs.
-
-+config GPIO_RALINK
-+ bool "Ralink GPIO Support"
-+ depends on RALINK
-+ help
-+ Say yes here to support the Ralink SoC GPIO device
-+
- config GPIO_SPEAR_SPICS
- bool "ST SPEAr13xx SPI Chip Select as GPIO support"
- depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
- obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
- obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
-+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,345 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+
-+enum ralink_gpio_reg {
-+ GPIO_REG_INT = 0,
-+ GPIO_REG_EDGE,
-+ GPIO_REG_RENA,
-+ GPIO_REG_FENA,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DIR,
-+ GPIO_REG_POL,
-+ GPIO_REG_SET,
-+ GPIO_REG_RESET,
-+ GPIO_REG_TOGGLE,
-+ GPIO_REG_MAX
-+};
-+
-+struct ralink_gpio_chip {
-+ struct gpio_chip chip;
-+ u8 regs[GPIO_REG_MAX];
-+
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ struct irq_domain *domain;
-+ int irq;
-+
-+ u32 rising;
-+ u32 falling;
-+};
-+
-+#define MAP_MAX 4
-+static struct irq_domain *irq_map[MAP_MAX];
-+static int irq_map_count;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
-+{
-+ struct ralink_gpio_chip *rg;
-+
-+ rg = container_of(chip, struct ralink_gpio_chip, chip);
-+
-+ return rg;
-+}
-+
-+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, rg->membase + rg->regs[reg]);
-+}
-+
-+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
-+{
-+ return ioread32(rg->membase + rg->regs[reg]);
-+}
-+
-+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
-+}
-+
-+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t &= ~BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ ralink_gpio_set(chip, offset, value);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t |= BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ if (rg->irq < 1)
-+ return -1;
-+
-+ return irq_create_mapping(rg->domain, pin);
-+}
-+
-+static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < irq_map_count; i++) {
-+ struct irq_domain *domain = irq_map[i];
-+ struct ralink_gpio_chip *rg;
-+ unsigned long pending;
-+ int bit;
-+
-+ rg = (struct ralink_gpio_chip *) domain->host_data;
-+ pending = rt_gpio_r32(rg, GPIO_REG_INT);
-+
-+ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
-+ u32 map = irq_find_mapping(domain, bit);
-+ generic_handle_irq(map);
-+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void ralink_gpio_irq_unmask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 val;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ val = rt_gpio_r32(rg, GPIO_REG_RENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising));
-+ rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void ralink_gpio_irq_mask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 val;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ val = rt_gpio_r32(rg, GPIO_REG_RENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq));
-+ rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ struct ralink_gpio_chip *rg;
-+ u32 mask = BIT(d->hwirq);
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip ralink_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = ralink_gpio_irq_unmask,
-+ .irq_mask = ralink_gpio_irq_mask,
-+ .irq_mask_ack = ralink_gpio_irq_mask,
-+ .irq_set_type = ralink_gpio_irq_type,
-+};
-+
-+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = gpio_map,
-+};
-+
-+static void ralink_gpio_irq_init(struct device_node *np,
-+ struct ralink_gpio_chip *rg)
-+{
-+ if (irq_map_count >= MAP_MAX)
-+ return;
-+
-+ rg->irq = irq_of_parse_and_map(np, 0);
-+ if (!rg->irq)
-+ return;
-+
-+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
-+ &irq_domain_ops, rg);
-+ if (!rg->domain) {
-+ dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
-+ return;
-+ }
-+
-+ irq_map[irq_map_count++] = rg->domain;
-+
-+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
-+
-+ if (!atomic_read(&irq_refcount))
-+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
-+ atomic_inc(&irq_refcount);
-+
-+ dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
-+}
-+
-+static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ return pinctrl_request_gpio(gpio);
-+}
-+
-+static int ralink_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct ralink_gpio_chip *rg;
-+ const __be32 *ngpio, *gpiobase;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to find resource\n");
-+ return -ENOMEM;
-+ }
-+
-+ rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+ if (!rg)
-+ return -ENOMEM;
-+
-+ rg->membase = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!rg->membase) {
-+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (of_property_read_u8_array(np, "ralink,register-map",
-+ rg->regs, GPIO_REG_MAX)) {
-+ dev_err(&pdev->dev, "failed to read register definition\n");
-+ return -EINVAL;
-+ }
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ if (!ngpio) {
-+ dev_err(&pdev->dev, "failed to read number of pins\n");
-+ return -EINVAL;
-+ }
-+
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (gpiobase)
-+ rg->chip.base = be32_to_cpu(*gpiobase);
-+ else
-+ rg->chip.base = -1;
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.dev = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
-+ rg->chip.ngpio = be32_to_cpu(*ngpio);
-+ rg->chip.direction_input = ralink_gpio_direction_input;
-+ rg->chip.direction_output = ralink_gpio_direction_output;
-+ rg->chip.get = ralink_gpio_get;
-+ rg->chip.set = ralink_gpio_set;
-+ rg->chip.request = ralink_gpio_request;
-+ rg->chip.to_irq = ralink_gpio_to_irq;
-+
-+ /* set polarity to low for all lines */
-+ rt_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ ralink_gpio_irq_init(np, rg);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static const struct of_device_id ralink_gpio_match[] = {
-+ { .compatible = "ralink,rt2880-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
-+
-+static struct platform_driver ralink_gpio_driver = {
-+ .probe = ralink_gpio_probe,
-+ .driver = {
-+ .name = "rt2880_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_gpio_match,
-+ },
-+};
-+
-+static int __init ralink_gpio_init(void)
-+{
-+ return platform_driver_register(&ralink_gpio_driver);
-+}
-+
-+subsys_initcall(ralink_gpio_init);
diff --git a/target/linux/ramips/patches-3.10/0009-MIPS-ralink-add-support-for-reset-controller-API.patch b/target/linux/ramips/patches-3.10/0009-MIPS-ralink-add-support-for-reset-controller-API.patch
deleted file mode 100644
index c30a5dd..0000000
--- a/target/linux/ramips/patches-3.10/0009-MIPS-ralink-add-support-for-reset-controller-API.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 4e694014a11a407e309f62c7daade545ba71dcf1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:54:22 +0200
-Subject: [PATCH 09/25] MIPS: ralink: add support for reset-controller API
-
-Add a helper for reseting different devices on the SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 1 +
- arch/mips/ralink/common.h | 2 ++
- arch/mips/ralink/of.c | 3 +++
- arch/mips/ralink/reset.c | 62 +++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 68 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -374,6 +374,7 @@ config MACH_VR41XX
- select CSRC_R4K
- select SYS_HAS_CPU_VR41XX
- select ARCH_REQUIRE_GPIOLIB
-+ select ARCH_HAS_RESET_CONTROLLER
-
- config NXP_STB220
- bool "NXP STB220 board"
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -46,6 +46,8 @@ extern void ralink_of_remap(void);
- extern void ralink_clk_init(void);
- extern void ralink_clk_add(const char *dev, unsigned long rate);
-
-+extern void ralink_rst_init(void);
-+
- extern void prom_soc_init(struct ralink_soc_info *soc_info);
-
- __iomem void *plat_of_remap_node(const char *node);
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -110,6 +110,9 @@ static int __init plat_of_setup(void)
- if (of_platform_populate(NULL, of_ids, NULL, NULL))
- panic("failed to populate DT\n");
-
-+ /* make sure ithat the reset controller is setup early */
-+ ralink_rst_init();
-+
- return 0;
- }
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -10,6 +10,8 @@
-
- #include <linux/pm.h>
- #include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/reset-controller.h>
-
- #include <asm/reboot.h>
-
-@@ -19,6 +21,66 @@
- #define SYSC_REG_RESET_CTRL 0x034
- #define RSTCTL_RESET_SYSTEM BIT(0)
-
-+static int ralink_assert_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ u32 val;
-+
-+ if (id < 8)
-+ return -1;
-+
-+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-+ val |= BIT(id);
-+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
-+
-+ return 0;
-+}
-+
-+static int ralink_deassert_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ u32 val;
-+
-+ if (id < 8)
-+ return -1;
-+
-+ val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-+ val &= ~BIT(id);
-+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
-+
-+ return 0;
-+}
-+
-+static int ralink_reset_device(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ ralink_assert_device(rcdev, id);
-+ return ralink_deassert_device(rcdev, id);
-+}
-+
-+static struct reset_control_ops reset_ops = {
-+ .reset = ralink_reset_device,
-+ .assert = ralink_assert_device,
-+ .deassert = ralink_deassert_device,
-+};
-+
-+static struct reset_controller_dev reset_dev = {
-+ .ops = &reset_ops,
-+ .owner = THIS_MODULE,
-+ .nr_resets = 32,
-+ .of_reset_n_cells = 1,
-+};
-+
-+void ralink_rst_init(void)
-+{
-+ reset_dev.of_node = of_find_compatible_node(NULL, NULL,
-+ "ralink,rt2880-reset");
-+ if (!reset_dev.of_node)
-+ pr_err("Failed to find reset controller node");
-+ else
-+ reset_controller_register(&reset_dev);
-+}
-+
- static void ralink_restart(char *command)
- {
- local_irq_disable();
diff --git a/target/linux/ramips/patches-3.10/0010-MIPS-ralink-add-support-for-periodic-timer-irq.patch b/target/linux/ramips/patches-3.10/0010-MIPS-ralink-add-support-for-periodic-timer-irq.patch
deleted file mode 100644
index 49e64fd..0000000
--- a/target/linux/ramips/patches-3.10/0010-MIPS-ralink-add-support-for-periodic-timer-irq.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 1cd8a1dc8e942bd130dc40ff801f37ad296495e3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:41:04 +0200
-Subject: [PATCH 10/25] MIPS: ralink: add support for periodic timer irq
-
-Adds a driver for the periodic timer found on Ralink SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile | 2 +-
- arch/mips/ralink/timer.c | 185 +++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 186 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/ralink/timer.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -6,7 +6,7 @@
- # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-
--obj-y := prom.o of.o reset.o clk.o irq.o
-+obj-y := prom.o of.o reset.o clk.o irq.o timer.o
-
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
---- /dev/null
-+++ b/arch/mips/ralink/timer.c
-@@ -0,0 +1,185 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/timer.h>
-+#include <linux/of_gpio.h>
-+#include <linux/clk.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define TIMER_REG_TMRSTAT 0x00
-+#define TIMER_REG_TMR0LOAD 0x10
-+#define TIMER_REG_TMR0CTL 0x18
-+
-+#define TMRSTAT_TMR0INT BIT(0)
-+
-+#define TMR0CTL_ENABLE BIT(7)
-+#define TMR0CTL_MODE_PERIODIC BIT(4)
-+#define TMR0CTL_PRESCALER 1
-+#define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
-+#define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
-+
-+struct rt_timer {
-+ struct device *dev;
-+ void __iomem *membase;
-+ int irq;
-+ unsigned long timer_freq;
-+ unsigned long timer_div;
-+};
-+
-+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-+{
-+ __raw_writel(val, rt->membase + reg);
-+}
-+
-+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
-+{
-+ return __raw_readl(rt->membase + reg);
-+}
-+
-+static irqreturn_t rt_timer_irq(int irq, void *_rt)
-+{
-+ struct rt_timer *rt = (struct rt_timer *) _rt;
-+
-+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-+ rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int rt_timer_request(struct rt_timer *rt)
-+{
-+ int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
-+ dev_name(rt->dev), rt);
-+ if (err) {
-+ dev_err(rt->dev, "failed to request irq\n");
-+ } else {
-+ u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
-+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
-+ }
-+ return err;
-+}
-+
-+static void rt_timer_free(struct rt_timer *rt)
-+{
-+ free_irq(rt->irq, rt);
-+}
-+
-+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
-+{
-+ if (rt->timer_freq < divisor)
-+ rt->timer_div = rt->timer_freq;
-+ else
-+ rt->timer_div = divisor;
-+
-+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-+
-+ return 0;
-+}
-+
-+static int rt_timer_enable(struct rt_timer *rt)
-+{
-+ u32 t;
-+
-+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-+
-+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
-+ t |= TMR0CTL_ENABLE;
-+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
-+
-+ return 0;
-+}
-+
-+static void rt_timer_disable(struct rt_timer *rt)
-+{
-+ u32 t;
-+
-+ t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
-+ t &= ~TMR0CTL_ENABLE;
-+ rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
-+}
-+
-+static int rt_timer_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct rt_timer *rt;
-+ struct clk *clk;
-+
-+ rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
-+ if (!rt) {
-+ dev_err(&pdev->dev, "failed to allocate memory\n");
-+ return -ENOMEM;
-+ }
-+
-+ rt->irq = platform_get_irq(pdev, 0);
-+ if (!rt->irq) {
-+ dev_err(&pdev->dev, "failed to load irq\n");
-+ return -ENOENT;
-+ }
-+
-+ rt->membase = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(rt->membase))
-+ return PTR_ERR(rt->membase);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "failed get clock rate\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
-+ if (!rt->timer_freq)
-+ return -EINVAL;
-+
-+ rt->dev = &pdev->dev;
-+ platform_set_drvdata(pdev, rt);
-+
-+ rt_timer_request(rt);
-+ rt_timer_config(rt, 2);
-+ rt_timer_enable(rt);
-+
-+ dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
-+
-+ return 0;
-+}
-+
-+static int rt_timer_remove(struct platform_device *pdev)
-+{
-+ struct rt_timer *rt = platform_get_drvdata(pdev);
-+
-+ rt_timer_disable(rt);
-+ rt_timer_free(rt);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt_timer_match[] = {
-+ { .compatible = "ralink,rt2880-timer" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt_timer_match);
-+
-+static struct platform_driver rt_timer_driver = {
-+ .probe = rt_timer_probe,
-+ .remove = rt_timer_remove,
-+ .driver = {
-+ .name = "rt-timer",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt_timer_match
-+ },
-+};
-+
-+module_platform_driver(rt_timer_driver);
-+
-+MODULE_DESCRIPTION("Ralink RT2880 timer");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch b/target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch
deleted file mode 100644
index 5626ada..0000000
--- a/target/linux/ramips/patches-3.10/0011-MIPS-ralink-add-support-for-systick-timer-found-on-n.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 3b511d972b556712f89ccc68825c0ec8f398dc5c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:46:09 +0200
-Subject: [PATCH 11/25] MIPS: ralink: add support for systick timer found on
- newer ralink SoC
-
-Newer Ralink SoC (MT7620x and RT5350) have a 50KHz clock that runs independent
-of the SoC master clock. If we want to automatic frequency scaling to work we
-need to use the systick timer as the clock source.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 7 ++
- arch/mips/ralink/Makefile | 2 +
- arch/mips/ralink/cevt-rt3352.c | 145 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 154 insertions(+)
- create mode 100644 arch/mips/ralink/cevt-rt3352.c
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,5 +1,12 @@
- if RALINK
-
-+config CLKEVT_RT3352
-+ bool "Systick Clockevent source"
-+ depends on SOC_RT305X || SOC_MT7620
-+ default y
-+ select CLKSRC_OF
-+ select CLKSRC_MMIO
-+
- choice
- prompt "Ralink SoC selection"
- default SOC_RT305X
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -8,6 +8,8 @@
-
- obj-y := prom.o of.o reset.o clk.o irq.o timer.o
-
-+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-+
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
- obj-$(CONFIG_SOC_RT3883) += rt3883.o
---- /dev/null
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -0,0 +1,145 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/clockchips.h>
-+#include <linux/clocksource.h>
-+#include <linux/interrupt.h>
-+#include <linux/reset.h>
-+#include <linux/init.h>
-+#include <linux/time.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define SYSTICK_FREQ (50 * 1000)
-+
-+#define SYSTICK_CONFIG 0x00
-+#define SYSTICK_COMPARE 0x04
-+#define SYSTICK_COUNT 0x08
-+
-+/* route systick irq to mips irq 7 instead of the r4k-timer */
-+#define CFG_EXT_STK_EN 0x2
-+/* enable the counter */
-+#define CFG_CNT_EN 0x1
-+
-+struct systick_device {
-+ void __iomem *membase;
-+ struct clock_event_device dev;
-+ int irq_requested;
-+ int freq_scale;
-+};
-+
-+static void systick_set_clock_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evt);
-+
-+static int systick_next_event(unsigned long delta,
-+ struct clock_event_device *evt)
-+{
-+ struct systick_device *sdev;
-+ u32 count;
-+
-+ sdev = container_of(evt, struct systick_device, dev);
-+ count = ioread32(sdev->membase + SYSTICK_COUNT);
-+ count = (count + delta) % SYSTICK_FREQ;
-+ iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
-+
-+ return 0;
-+}
-+
-+static void systick_event_handler(struct clock_event_device *dev)
-+{
-+ /* noting to do here */
-+}
-+
-+static irqreturn_t systick_interrupt(int irq, void *dev_id)
-+{
-+ struct clock_event_device *dev = (struct clock_event_device *) dev_id;
-+
-+ dev->event_handler(dev);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct systick_device systick = {
-+ .dev = {
-+ /*
-+ * cevt-r4k uses 300, make sure systick
-+ * gets used if available
-+ */
-+ .rating = 310,
-+ .features = CLOCK_EVT_FEAT_ONESHOT,
-+ .set_next_event = systick_next_event,
-+ .set_mode = systick_set_clock_mode,
-+ .event_handler = systick_event_handler,
-+ },
-+};
-+
-+static struct irqaction systick_irqaction = {
-+ .handler = systick_interrupt,
-+ .flags = IRQF_PERCPU | IRQF_TIMER,
-+ .dev_id = &systick.dev,
-+};
-+
-+static void systick_set_clock_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evt)
-+{
-+ struct systick_device *sdev;
-+
-+ sdev = container_of(evt, struct systick_device, dev);
-+
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ if (!sdev->irq_requested)
-+ setup_irq(systick.dev.irq, &systick_irqaction);
-+ sdev->irq_requested = 1;
-+ iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
-+ systick.membase + SYSTICK_CONFIG);
-+ break;
-+
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ if (sdev->irq_requested)
-+ free_irq(systick.dev.irq, &systick_irqaction);
-+ sdev->irq_requested = 0;
-+ iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+ break;
-+
-+ default:
-+ pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
-+ break;
-+ }
-+}
-+
-+static void __init ralink_systick_init(struct device_node *np)
-+{
-+ systick.membase = of_iomap(np, 0);
-+ if (!systick.membase)
-+ return;
-+
-+ systick_irqaction.name = np->name;
-+ systick.dev.name = np->name;
-+ clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
-+ systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
-+ systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
-+ systick.dev.irq = irq_of_parse_and_map(np, 0);
-+ if (!systick.dev.irq) {
-+ pr_err("%s: request_irq failed", np->name);
-+ return;
-+ }
-+
-+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-+ SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
-+
-+ clockevents_register_device(&systick.dev);
-+
-+ pr_info("%s: runing - mult: %d, shift: %d\n",
-+ np->name, systick.dev.mult, systick.dev.shift);
-+}
-+
-+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
diff --git a/target/linux/ramips/patches-3.10/0012-MIPS-ralink-probe-clocksources-from-OF.patch b/target/linux/ramips/patches-3.10/0012-MIPS-ralink-probe-clocksources-from-OF.patch
deleted file mode 100644
index d46296b..0000000
--- a/target/linux/ramips/patches-3.10/0012-MIPS-ralink-probe-clocksources-from-OF.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From c4d6a957efb0c8d919302598ae547bde05137461 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:48:39 +0200
-Subject: [PATCH 12/25] MIPS: ralink: probe clocksources from OF
-
-Make plat_time_init() call clocksource_of_init() allowing the systick cevt
-to load.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/clk.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/clk.c
-+++ b/arch/mips/ralink/clk.c
-@@ -69,4 +69,5 @@ void __init plat_time_init(void)
- pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
- mips_hpt_frequency = clk_get_rate(clk) / 2;
- clk_put(clk);
-+ clocksource_of_init();
- }
diff --git a/target/linux/ramips/patches-3.10/0013-MIPS-ralink-mt7620-add-verbose-ram-info.patch b/target/linux/ramips/patches-3.10/0013-MIPS-ralink-mt7620-add-verbose-ram-info.patch
deleted file mode 100644
index f82446a..0000000
--- a/target/linux/ramips/patches-3.10/0013-MIPS-ralink-mt7620-add-verbose-ram-info.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2d17c793a9cd3f67351d1a15c099ef2464e81f47 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 20 May 2013 20:30:11 +0200
-Subject: [PATCH 13/25] MIPS: ralink: mt7620: add verbose ram info
-
-Make the code print which of SDRAM, DDR1 or DDR2 was detected.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_inf
-
- switch (dram_type) {
- case SYSCFG0_DRAM_TYPE_SDRAM:
-+ pr_info("Board has SDRAM\n");
- soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
- soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
- break;
-
- case SYSCFG0_DRAM_TYPE_DDR1:
-+ pr_info("Board has DDR1\n");
- soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
- soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
- break;
-
- case SYSCFG0_DRAM_TYPE_DDR2:
-+ pr_info("Board has DDR2\n");
- soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
- soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
- break;
diff --git a/target/linux/ramips/patches-3.10/0014-MIPS-ralink-mt7620-add-spi-clock-definition.patch b/target/linux/ramips/patches-3.10/0014-MIPS-ralink-mt7620-add-spi-clock-definition.patch
deleted file mode 100644
index 16b89dc..0000000
--- a/target/linux/ramips/patches-3.10/0014-MIPS-ralink-mt7620-add-spi-clock-definition.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From d0da9f08ef37e9f639e3b7995d722684da2410a2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 23 May 2013 18:46:25 +0200
-Subject: [PATCH 14/25] MIPS: ralink: mt7620: add spi clock definition
-
-The definition of the spi clock is missing.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -167,6 +167,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("10000100.timer", 40000000);
- ralink_clk_add("10000500.uart", 40000000);
-+ ralink_clk_add("10000b00.spi", 40000000);
- ralink_clk_add("10000c00.uartlite", 40000000);
- }
-
diff --git a/target/linux/ramips/patches-3.10/0015-MIPS-ralink-mt7620-add-wdt-clock-definition.patch b/target/linux/ramips/patches-3.10/0015-MIPS-ralink-mt7620-add-wdt-clock-definition.patch
deleted file mode 100644
index ec045b5..0000000
--- a/target/linux/ramips/patches-3.10/0015-MIPS-ralink-mt7620-add-wdt-clock-definition.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 51db62f58431d9a89c55f59f98879829dcfddcaf Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 13:50:11 +0200
-Subject: [PATCH 15/25] MIPS: ralink: mt7620: add wdt clock definition
-
-The definition of the wdt clock is missing.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -166,6 +166,7 @@ void __init ralink_clk_init(void)
-
- ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("10000100.timer", 40000000);
-+ ralink_clk_add("10000120.watchdog", 40000000);
- ralink_clk_add("10000500.uart", 40000000);
- ralink_clk_add("10000b00.spi", 40000000);
- ralink_clk_add("10000c00.uartlite", 40000000);
diff --git a/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
deleted file mode 100644
index e29bb2b..0000000
--- a/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 011f4bdba0dd4d1dff6d33b1a65541fc4f09c78e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 May 2013 21:28:08 +0200
-Subject: [PATCH 16/25] MIPS: ralink: mt7620: fix usb issue during frequency
- scaling
-
-If the USB HCD is running and the cpu is scaled too low, then the USB stops
-working. Increase the idle speed of the core to fix this if the kernel is
-built with USB support.
-
-The values are taken from the Ralink SDK Kernel.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
- arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
- 2 files changed, 20 insertions(+)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -20,6 +20,7 @@
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
-+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c
- #define SYSC_REG_CPLL_CONFIG0 0x54
- #define SYSC_REG_CPLL_CONFIG1 0x58
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -20,6 +20,12 @@
-
- #include "common.h"
-
-+/* clock scaling */
-+#define CLKCFG_FDIV_MASK 0x1f00
-+#define CLKCFG_FDIV_USB_VAL 0x0300
-+#define CLKCFG_FFRAC_MASK 0x001f
-+#define CLKCFG_FFRAC_USB_VAL 0x0003
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -170,6 +176,19 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000500.uart", 40000000);
- ralink_clk_add("10000b00.spi", 40000000);
- ralink_clk_add("10000c00.uartlite", 40000000);
-+
-+ if (IS_ENABLED(CONFIG_USB)) {
-+ /*
-+ * When the CPU goes into sleep mode, the BUS clock will be too low for
-+ * USB to function properly
-+ */
-+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
-+
-+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
-+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
-+
-+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
-+ }
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.10/0017-MIPS-ralink-mt7620-this-SoC-has-ehci-and-ohci-hosts.patch b/target/linux/ramips/patches-3.10/0017-MIPS-ralink-mt7620-this-SoC-has-ehci-and-ohci-hosts.patch
deleted file mode 100644
index a783bd0..0000000
--- a/target/linux/ramips/patches-3.10/0017-MIPS-ralink-mt7620-this-SoC-has-ehci-and-ohci-hosts.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From c16c0b66594cb0be44e150dbe3fda747817b873d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 17:50:53 +0200
-Subject: [PATCH 17/25] MIPS: ralink: mt7620: this SoC has ehci and ohci hosts
-
-Select the the EHCI and OHCI symbols.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -29,6 +29,8 @@ choice
-
- config SOC_MT7620
- bool "MT7620"
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-
- endchoice
-
diff --git a/target/linux/ramips/patches-3.10/0018-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-3.10/0018-DT-Add-documentation-for-spi-rt2880.patch
deleted file mode 100644
index 69e8fdb..0000000
--- a/target/linux/ramips/patches-3.10/0018-DT-Add-documentation-for-spi-rt2880.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From c464a54f9a4a959d09206583b11ae99740e0f267 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 18/25] DT: Add documentation for spi-rt2880
-
-Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
- 1 file changed, 28 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-@@ -0,0 +1,28 @@
-+Ralink SoC RT2880 SPI master controller.
-+
-+This SPI controller is found on most wireless SoCs made by ralink.
-+
-+Required properties:
-+- compatible : "ralink,rt2880-spi"
-+- reg : The register base for the controller.
-+- #address-cells : <1>, as required by generic SPI binding.
-+- #size-cells : <0>, also as required by generic SPI binding.
-+
-+Child nodes as per the generic SPI binding.
-+
-+Example:
-+
-+ spi@b00 {
-+ compatible = "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ m25p80@0 {
-+ compatible = "m25p80";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ };
-+ };
-+
diff --git a/target/linux/ramips/patches-3.10/0019-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.10/0019-SPI-ralink-add-Ralink-SoC-spi-driver.patch
deleted file mode 100644
index d02ca67..0000000
--- a/target/linux/ramips/patches-3.10/0019-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ /dev/null
@@ -1,476 +0,0 @@
-From 43c36279a0e822de608c1e825826bbac3238d8a2 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 22 Apr 2013 23:16:18 +0200
-Subject: [PATCH 19/25] SPI: ralink: add Ralink SoC spi driver
-
-Add the driver needed to make SPI work on Ralink SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-rt2880.c | 450 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 457 insertions(+)
- create mode 100644 drivers/spi/spi-rt2880.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -354,6 +354,12 @@ config SPI_RSPI
- help
- SPI driver for Renesas RSPI blocks.
-
-+config SPI_RT2880
-+ tristate "Ralink RT288x SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
-+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
---- /dev/null
-+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,432 @@
-+/*
-+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ * Author: Shadi Ammouri <shadi@marvell.com>
-+ * Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/platform_device.h>
-+
-+#define DRIVER_NAME "spi-rt2880"
-+/* only one slave is supported*/
-+#define RALINK_NUM_CHIPSELECTS 1
-+/* in usec */
-+#define RALINK_SPI_WAIT_MAX_LOOP 2000
-+
-+#define RAMIPS_SPI_STAT 0x00
-+#define RAMIPS_SPI_CFG 0x10
-+#define RAMIPS_SPI_CTL 0x14
-+#define RAMIPS_SPI_DATA 0x20
-+#define RAMIPS_SPI_FIFO_STAT 0x38
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+/* SPICFG register bit field */
-+#define SPICFG_LSBFIRST 0
-+#define SPICFG_MSBFIRST BIT(8)
-+#define SPICFG_SPICLKPOL BIT(6)
-+#define SPICFG_RXCLKEDGE_FALLING BIT(5)
-+#define SPICFG_TXCLKEDGE_FALLING BIT(4)
-+#define SPICFG_SPICLK_PRESCALE_MASK 0x7
-+#define SPICFG_SPICLK_DIV2 0
-+#define SPICFG_SPICLK_DIV4 1
-+#define SPICFG_SPICLK_DIV8 2
-+#define SPICFG_SPICLK_DIV16 3
-+#define SPICFG_SPICLK_DIV32 4
-+#define SPICFG_SPICLK_DIV64 5
-+#define SPICFG_SPICLK_DIV128 6
-+#define SPICFG_SPICLK_DISABLE 7
-+
-+/* SPICTL register bit field */
-+#define SPICTL_HIZSDO BIT(3)
-+#define SPICTL_STARTWR BIT(2)
-+#define SPICTL_STARTRD BIT(1)
-+#define SPICTL_SPIENA BIT(0)
-+
-+/* SPIFIFOSTAT register bit field */
-+#define SPIFIFOSTAT_TXFULL BIT(17)
-+
-+struct rt2880_spi {
-+ struct spi_master *master;
-+ void __iomem *base;
-+ unsigned int sys_freq;
-+ unsigned int speed;
-+ struct clk *clk;
-+ spinlock_t lock;
-+};
-+
-+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+ unsigned long flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&rs->lock, flags);
-+ val = ioread32(addr);
-+ val |= mask;
-+ iowrite32(val, addr);
-+ spin_unlock_irqrestore(&rs->lock, flags);
-+}
-+
-+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+ unsigned long flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&rs->lock, flags);
-+ val = ioread32(addr);
-+ val &= ~mask;
-+ iowrite32(val, addr);
-+ spin_unlock_irqrestore(&rs->lock, flags);
-+}
-+
-+static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ u32 rate;
-+ u32 prescale;
-+ u32 reg;
-+
-+ dev_dbg(&spi->dev, "speed:%u\n", speed);
-+
-+ /*
-+ * the supported rates are: 2, 4, 8, ... 128
-+ * round up as we look for equal or less speed
-+ */
-+ rate = DIV_ROUND_UP(rs->sys_freq, speed);
-+ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
-+ rate = roundup_pow_of_two(rate);
-+ dev_dbg(&spi->dev, "rate-2:%u\n", rate);
-+
-+ /* check if requested speed is too small */
-+ if (rate > 128)
-+ return -EINVAL;
-+
-+ if (rate < 2)
-+ rate = 2;
-+
-+ /* Convert the rate to SPI clock divisor value. */
-+ prescale = ilog2(rate / 2);
-+ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
-+
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+ rs->speed = speed;
-+ return 0;
-+}
-+
-+/*
-+ * called only when no transfer is active on the bus
-+ */
-+static int
-+rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ unsigned int speed = spi->max_speed_hz;
-+ int rc;
-+
-+ if ((t != NULL) && t->speed_hz)
-+ speed = t->speed_hz;
-+
-+ if (rs->speed != speed) {
-+ dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
-+ rc = rt2880_spi_baudrate_set(spi, speed);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ return 0;
-+}
-+
-+static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
-+{
-+ if (enable)
-+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ else
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+}
-+
-+static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
-+{
-+ int i;
-+
-+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
-+ u32 status;
-+
-+ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
-+ if ((status & SPISTAT_BUSY) == 0)
-+ return 0;
-+
-+ cpu_relax();
-+ udelay(1);
-+ }
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static unsigned int
-+rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ unsigned count = 0;
-+ u8 *rx = xfer->rx_buf;
-+ const u8 *tx = xfer->tx_buf;
-+ int err;
-+
-+ dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len,
-+ (tx != NULL) ? "tx" : " ",
-+ (rx != NULL) ? "rx" : " ");
-+
-+ if (tx) {
-+ for (count = 0; count < xfer->len; count++) {
-+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-+ err = rt2880_spi_wait_till_ready(rs);
-+ if (err) {
-+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ }
-+ }
-+
-+ if (rx) {
-+ for (count = 0; count < xfer->len; count++) {
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-+ err = rt2880_spi_wait_till_ready(rs);
-+ if (err) {
-+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+ }
-+ }
-+
-+out:
-+ return count;
-+}
-+
-+static int rt2880_spi_transfer_one_message(struct spi_master *master,
-+ struct spi_message *m)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = m->spi;
-+ struct spi_transfer *t = NULL;
-+ int par_override = 0;
-+ int status = 0;
-+ int cs_active = 0;
-+
-+ /* Load defaults */
-+ status = rt2880_spi_setup_transfer(spi, NULL);
-+ if (status < 0)
-+ goto msg_done;
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
-+ dev_err(&spi->dev,
-+ "message rejected: invalid transfer data buffers\n");
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
-+ dev_err(&spi->dev,
-+ "message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
-+ (rs->sys_freq / 128), t->speed_hz);
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ if (par_override || t->speed_hz || t->bits_per_word) {
-+ par_override = 1;
-+ status = rt2880_spi_setup_transfer(spi, t);
-+ if (status < 0)
-+ goto msg_done;
-+ if (!t->speed_hz && !t->bits_per_word)
-+ par_override = 0;
-+ }
-+
-+ if (!cs_active) {
-+ rt2880_spi_set_cs(rs, 1);
-+ cs_active = 1;
-+ }
-+
-+ if (t->len)
-+ m->actual_length += rt2880_spi_write_read(spi, t);
-+
-+ if (t->delay_usecs)
-+ udelay(t->delay_usecs);
-+
-+ if (t->cs_change) {
-+ rt2880_spi_set_cs(rs, 0);
-+ cs_active = 0;
-+ }
-+ }
-+
-+msg_done:
-+ if (cs_active)
-+ rt2880_spi_set_cs(rs, 0);
-+
-+ m->status = status;
-+ spi_finalize_current_message(master);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_setup(struct spi_device *spi)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+
-+ if ((spi->max_speed_hz == 0) ||
-+ (spi->max_speed_hz > (rs->sys_freq / 2)))
-+ spi->max_speed_hz = (rs->sys_freq / 2);
-+
-+ if (spi->max_speed_hz < (rs->sys_freq / 128)) {
-+ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * baudrate & width will be set rt2880_spi_setup_transfer
-+ */
-+ return 0;
-+}
-+
-+static void rt2880_spi_reset(struct rt2880_spi *rs)
-+{
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG,
-+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
-+}
-+
-+static int rt2880_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+ unsigned long flags;
-+ void __iomem *base;
-+ struct resource *r;
-+ int status = 0;
-+ struct clk *clk;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
-+ status);
-+ return PTR_ERR(clk);
-+ }
-+
-+ status = clk_prepare_enable(clk);
-+ if (status)
-+ return status;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (master == NULL) {
-+ dev_dbg(&pdev->dev, "master allocation failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* we support only mode 0, and no options */
-+ master->mode_bits = 0;
-+
-+ master->setup = rt2880_spi_setup;
-+ master->transfer_one_message = rt2880_spi_transfer_one_message;
-+ master->num_chipselect = RALINK_NUM_CHIPSELECTS;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->dev.of_node = pdev->dev.of_node;
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_master_get_devdata(master);
-+ rs->base = base;
-+ rs->clk = clk;
-+ rs->master = master;
-+ rs->sys_freq = clk_get_rate(rs->clk);
-+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
-+ spin_lock_irqsave(&rs->lock, flags);
-+
-+ device_reset(&pdev->dev);
-+
-+ rt2880_spi_reset(rs);
-+
-+ return spi_register_master(master);
-+}
-+
-+static int rt2880_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_master_get_devdata(master);
-+
-+ clk_disable(rs->clk);
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+ { .compatible = "ralink,rt2880-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
-+static struct platform_driver rt2880_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_spi_match,
-+ },
-+ .probe = rt2880_spi_probe,
-+ .remove = rt2880_spi_remove,
-+};
-+
-+module_platform_driver(rt2880_spi_driver);
-+
-+MODULE_DESCRIPTION("Ralink SPI driver");
-+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.10/0020-MIPS-ralink-update-dts-files.patch b/target/linux/ramips/patches-3.10/0020-MIPS-ralink-update-dts-files.patch
deleted file mode 100644
index e70edd3..0000000
--- a/target/linux/ramips/patches-3.10/0020-MIPS-ralink-update-dts-files.patch
+++ /dev/null
@@ -1,629 +0,0 @@
-From 5845a3aa53cf42893db05662aa9bb91387949ff6 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 12 Aug 2013 18:11:33 +0200
-Subject: [PATCH 22/25] MIPS: ralink: update dts files
-
-Add the devicetree nodes needed to make the newly merged drivers work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/dts/mt7620a.dtsi | 135 +++++++++++++++++++++++
- arch/mips/ralink/dts/rt3050.dtsi | 156 ++++++++++++++++++++++++++
- arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 510 insertions(+)
-
---- a/arch/mips/ralink/dts/mt7620a.dtsi
-+++ b/arch/mips/ralink/dts/mt7620a.dtsi
-@@ -29,10 +29,32 @@
- reg = <0x0 0x100>;
- };
-
-+ timer@100 {
-+ compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
-+ reg = <0x100 0x20>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
-+ watchdog@120 {
-+ compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
-+ reg = <0x120 0x10>;
-+
-+ resets = <&rstctrl 8>;
-+ reset-names = "wdt";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
- intc: intc@200 {
- compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "intc";
-+
- interrupt-controller;
- #interrupt-cells = <1>;
-
-@@ -43,16 +65,129 @@
- memc@300 {
- compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
-+
-+ resets = <&rstctrl 20>;
-+ reset-names = "mc";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <3>;
-+ };
-+
-+ uart@500 {
-+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
-+ reg = <0x500 0x100>;
-+
-+ resets = <&rstctrl 12>;
-+ reset-names = "uart";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <5>;
-+
-+ reg-shift = <2>;
-+
-+ status = "disabled";
-+ };
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+ reg = <0x600 0x34>;
-+
-+ resets = <&rstctrl 13>;
-+ reset-names = "pio";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio1: gpio@638 {
-+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+ reg = <0x638 0x24>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <24>;
-+ ralink,num-gpios = <16>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio2: gpio@660 {
-+ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
-+ reg = <0x660 0x24>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <40>;
-+ ralink,num-gpios = <32>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ spi@b00 {
-+ compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ resets = <&rstctrl 18>;
-+ reset-names = "spi";
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ status = "disabled";
- };
-
- uartlite@c00 {
- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "uartl";
-+
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
-+
-+ systick@d00 {
-+ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
-+ reg = <0xd00 0x10>;
-+
-+ resets = <&rstctrl 28>;
-+ reset-names = "intc";
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <7>;
-+ };
-+ };
-+
-+ rstctrl: rstctrl {
-+ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
-+ #reset-cells = <1>;
- };
- };
---- a/arch/mips/ralink/dts/rt3050.dtsi
-+++ b/arch/mips/ralink/dts/rt3050.dtsi
-@@ -9,6 +9,10 @@
- };
- };
-
-+ chosen {
-+ bootargs = "console=ttyS0,57600";
-+ };
-+
- cpuintc: cpuintc@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
-@@ -29,10 +33,32 @@
- reg = <0x0 0x100>;
- };
-
-+ timer@100 {
-+ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
-+ reg = <0x100 0x20>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
-+ watchdog@120 {
-+ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
-+ reg = <0x120 0x10>;
-+
-+ resets = <&rstctrl 8>;
-+ reset-names = "wdt";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
- intc: intc@200 {
- compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "intc";
-+
- interrupt-controller;
- #interrupt-cells = <1>;
-
-@@ -43,17 +69,144 @@
- memc@300 {
- compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
-+
-+ resets = <&rstctrl 20>;
-+ reset-names = "mc";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <3>;
-+ };
-+
-+ uart@500 {
-+ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
-+ reg = <0x500 0x100>;
-+
-+ resets = <&rstctrl 12>;
-+ reset-names = "uart";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <5>;
-+
-+ reg-shift = <2>;
-+
-+ status = "disabled";
-+ };
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-+ reg = <0x600 0x34>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ resets = <&rstctrl 13>;
-+ reset-names = "pio";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ status = "disabled";
-+ };
-+
-+ gpio1: gpio@638 {
-+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-+ reg = <0x638 0x24>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <24>;
-+ ralink,num-gpios = <16>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio2: gpio@660 {
-+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-+ reg = <0x660 0x24>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <40>;
-+ ralink,num-gpios = <12>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ spi@b00 {
-+ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ resets = <&rstctrl 18>;
-+ reset-names = "spi";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ status = "disabled";
- };
-
- uartlite@c00 {
- compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "uartl";
-+
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
-+
-+ };
-+
-+ rstctrl: rstctrl {
-+ compatible = "ralink,rt3050-reset", "ralink,rt2880-reset";
-+ #reset-cells = <1>;
-+ };
-+
-+ ethernet@10100000 {
-+ compatible = "ralink,rt3050-eth";
-+ reg = <0x10100000 10000>;
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <5>;
-+
-+ status = "disabled";
-+ };
-+
-+ esw@10110000 {
-+ compatible = "ralink,rt3050-esw";
-+ reg = <0x10110000 8000>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <17>;
-+
-+ status = "disabled";
-+ };
-+
-+ wmac@10180000 {
-+ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
-+ reg = <0x10180000 40000>;
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <6>;
-+
-+ status = "disabled";
- };
-
- usb@101c0000 {
-@@ -63,6 +216,9 @@
- interrupt-parent = <&intc>;
- interrupts = <18>;
-
-+ resets = <&rstctrl 22>;
-+ reset-names = "otg";
-+
- status = "disabled";
- };
- };
---- a/arch/mips/ralink/dts/rt3883.dtsi
-+++ b/arch/mips/ralink/dts/rt3883.dtsi
-@@ -29,10 +29,32 @@
- reg = <0x0 0x100>;
- };
-
-+ timer@100 {
-+ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
-+ reg = <0x100 0x20>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
-+ watchdog@120 {
-+ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
-+ reg = <0x120 0x10>;
-+
-+ resets = <&rstctrl 8>;
-+ reset-names = "wdt";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <1>;
-+ };
-+
- intc: intc@200 {
- compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "intc";
-+
- interrupt-controller;
- #interrupt-cells = <1>;
-
-@@ -43,16 +65,213 @@
- memc@300 {
- compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
-+
-+ resets = <&rstctrl 20>;
-+ reset-names = "mc";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <3>;
-+ };
-+
-+ uart@500 {
-+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
-+ reg = <0x500 0x100>;
-+
-+ resets = <&rstctrl 12>;
-+ reset-names = "uart";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <5>;
-+
-+ reg-shift = <2>;
-+
-+ status = "disabled";
-+ };
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+ reg = <0x600 0x34>;
-+
-+ resets = <&rstctrl 13>;
-+ reset-names = "pio";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio1: gpio@638 {
-+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+ reg = <0x638 0x24>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <24>;
-+ ralink,num-gpios = <16>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio2: gpio@660 {
-+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+ reg = <0x660 0x24>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <40>;
-+ ralink,num-gpios = <32>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ gpio3: gpio@688 {
-+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+ reg = <0x688 0x24>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ ralink,gpio-base = <72>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 10 14 18 1c
-+ 20 24 ];
-+
-+ status = "disabled";
-+ };
-+
-+ spi0: spi@b00 {
-+ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ resets = <&rstctrl 18>;
-+ reset-names = "spi";
-+
-+ status = "disabled";
- };
-
- uartlite@c00 {
- compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
-+ resets = <&rstctrl 19>;
-+ reset-names = "uartl";
-+
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
- };
-+
-+ rstctrl: rstctrl {
-+ compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
-+ #reset-cells = <1>;
-+ };
-+
-+ pci@10140000 {
-+ compatible = "ralink,rt3883-pci";
-+ reg = <0x10140000 0x20000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges; /* direct mapping */
-+
-+ status = "disabled";
-+
-+ pciintc: interrupt-controller {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <4>;
-+ };
-+
-+ host-bridge {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+
-+ device_type = "pci";
-+
-+ bus-range = <0 255>;
-+ ranges = <
-+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
-+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
-+ >;
-+
-+ interrupt-map-mask = <0xf800 0 0 7>;
-+ interrupt-map = <
-+ /* IDSEL 17 */
-+ 0x8800 0 0 1 &pciintc 18
-+ 0x8800 0 0 2 &pciintc 18
-+ 0x8800 0 0 3 &pciintc 18
-+ 0x8800 0 0 4 &pciintc 18
-+ /* IDSEL 18 */
-+ 0x9000 0 0 1 &pciintc 19
-+ 0x9000 0 0 2 &pciintc 19
-+ 0x9000 0 0 3 &pciintc 19
-+ 0x9000 0 0 4 &pciintc 19
-+ >;
-+
-+ pci-bridge@1 {
-+ reg = <0x0800 0 0 0 0>;
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ status = "disabled";
-+
-+ ralink,pci-slot = <1>;
-+
-+ interrupt-map-mask = <0x0 0 0 0>;
-+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
-+ };
-+
-+ pci-slot@17 {
-+ reg = <0x8800 0 0 0 0>;
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ralink,pci-slot = <17>;
-+
-+ status = "disabled";
-+ };
-+
-+ pci-slot@18 {
-+ reg = <0x9000 0 0 0 0>;
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ ralink,pci-slot = <18>;
-+
-+ status = "disabled";
-+ };
-+ };
-+ };
- };
diff --git a/target/linux/ramips/patches-3.10/0021-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-3.10/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
deleted file mode 100644
index 3fb262b..0000000
--- a/target/linux/ramips/patches-3.10/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From f6dc5d40c766e5ff9b18b93a1b6f7a576655f9c4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 21/25] MIPS: ralink: add cpu frequency scaling
-
-This feature will break udelay() and cause the delay loop to have longer delays
-when the frequency is scaled causing a performance hit.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -29,6 +29,10 @@
- /* enable the counter */
- #define CFG_CNT_EN 0x1
-
-+/* mt7620 frequency scaling defines */
-+#define CLK_LUT_CFG 0x40
-+#define SLEEP_EN BIT(31)
-+
- struct systick_device {
- void __iomem *membase;
- struct clock_event_device dev;
-@@ -36,6 +40,8 @@ struct systick_device {
- int freq_scale;
- };
-
-+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
-+
- static void systick_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt);
-
-@@ -87,6 +93,21 @@ static struct irqaction systick_irqactio
- .dev_id = &systick.dev,
- };
-
-+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
-+{
-+ if (sdev->freq_scale == status)
-+ return;
-+
-+ sdev->freq_scale = status;
-+
-+ pr_info("%s: %s autosleep mode\n", systick.dev.name,
-+ (status) ? ("enable") : ("disable"));
-+ if (status)
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-+ else
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
-+}
-+
- static void systick_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
- {
-@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
- sdev->irq_requested = 1;
- iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
- systick.membase + SYSTICK_CONFIG);
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 1);
- break;
-
- case CLOCK_EVT_MODE_SHUTDOWN:
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 0);
- if (sdev->irq_requested)
- free_irq(systick.dev.irq, &systick_irqaction);
- sdev->irq_requested = 0;
-@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
- }
- }
-
-+static const struct of_device_id systick_match[] = {
-+ { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
-+ {},
-+};
-+
- static void __init ralink_systick_init(struct device_node *np)
- {
-+ const struct of_device_id *match;
-+
- systick.membase = of_iomap(np, 0);
- if (!systick.membase)
- return;
-
-+ match = of_match_node(systick_match, np);
-+ if (match)
-+ systick_freq_scaling = match->data;
-+
- systick_irqaction.name = np->name;
- systick.dev.name = np->name;
- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
diff --git a/target/linux/ramips/patches-3.10/0022-MIPS-add-driver-for-the-built-in-PCI-controller-of-the-RT3883-SoC.patch b/target/linux/ramips/patches-3.10/0022-MIPS-add-driver-for-the-built-in-PCI-controller-of-the-RT3883-SoC.patch
deleted file mode 100644
index 4bea702..0000000
--- a/target/linux/ramips/patches-3.10/0022-MIPS-add-driver-for-the-built-in-PCI-controller-of-the-RT3883-SoC.patch
+++ /dev/null
@@ -1,901 +0,0 @@
-From patchwork Fri Aug 23 12:03:20 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3] MIPS: add driver for the built-in PCI controller of the RT3883
- SoC
-From: Gabor Juhos <juhosg@openwrt.org>
-X-Patchwork-Id: 5758
-Message-Id: <1377259400-21211-1-git-send-email-juhosg@openwrt.org>
-To: Ralf Baechle <ralf@linux-mips.org>
-Cc: linux-mips@linux-mips.org, Gabor Juhos <juhosg@openwrt.org>,
- devicetree@vger.kernel.org
-Date: Fri, 23 Aug 2013 14:03:20 +0200
-
-The Ralink RT3883 SoCs have a built-in PCI Host Controller
-device. The patch adds a platform driver and device tree
-binding documentation for that.
-
-The patch also enables the HW_HAS_PCI config option. This
-is required in order to be able to enable the PCI support.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
-
----
-Changes since v2:
- - fix compiler warning:
-
- CC arch/mips/pci/pci-rt3883.o
- arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
- arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]
-
-Changes since v1:
- - change the 'status' property to optional in the binding doc
- - add board specific example to the binding doc
-
-rt3883-pci: fix-build-warning
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- .../devicetree/bindings/pci/ralink,rt3883-pci.txt | 190 ++++++
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-rt3883.c | 636 ++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 4 files changed, 828 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
- create mode 100644 arch/mips/pci/pci-rt3883.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
-@@ -0,0 +1,190 @@
-+* Mediatek/Ralink RT3883 PCI controller
-+
-+1) Main node
-+
-+ Required properties:
-+
-+ - compatible: must be "ralink,rt3883-pci"
-+
-+ - reg: specifies the physical base address of the controller and
-+ the length of the memory mapped region.
-+
-+ - #address-cells: specifies the number of cells needed to encode an
-+ address. The value must be 1.
-+
-+ - #size-cells: specifies the number of cells used to represent the size
-+ of an address. The value must be 1.
-+
-+ - ranges: specifies the translation between child address space and parent
-+ address space
-+
-+ Optional properties:
-+
-+ - status: indicates the operational status of the device.
-+ Value must be either "disabled" or "okay".
-+
-+2) Child nodes
-+
-+ The main node must have two child nodes which describes the built-in
-+ interrupt controller and the PCI host bridge.
-+
-+ a) Interrupt controller:
-+
-+ Required properties:
-+
-+ - interrupt-controller: identifies the node as an interrupt controller
-+
-+ - #address-cells: specifies the number of cells needed to encode an
-+ address. The value must be 0. As such, 'interrupt-map' nodes do not
-+ have to specify a parent unit address.
-+
-+ - #interrupt-cells: specifies the number of cells needed to encode an
-+ interrupt source. The value must be 1.
-+
-+ - interrupt-parent: the phandle for the interrupt controller that
-+ services interrupts for this device.
-+
-+ - interrupts: specifies the interrupt source of the parent interrupt
-+ controller. The format of the interrupt specifier depends on the
-+ parent interrupt controller.
-+
-+ b) PCI host bridge:
-+
-+ Required properties:
-+
-+ - #address-cells: specifies the number of cells needed to encode an
-+ address. The value must be 0.
-+
-+ - #size-cells: specifies the number of cells used to represent the size
-+ of an address. The value must be 2.
-+
-+ - #interrupt-cells: specifies the number of cells needed to encode an
-+ interrupt source. The value must be 1.
-+
-+ - device_type: must be "pci"
-+
-+ - bus-range: PCI bus numbers covered
-+
-+ - ranges: specifies the ranges for the PCI memory and I/O regions
-+
-+ - interrupt-map-mask,
-+ - interrupt-map: standard PCI properties to define the mapping of the
-+ PCI interface to interrupt numbers.
-+
-+ The PCI host bridge node migh have additional sub-nodes representing
-+ the onboard PCI devices/PCI slots. Each such sub-node must have the
-+ following mandatory properties:
-+
-+ - reg: used only for interrupt mapping, so only the first four bytes
-+ are used to refer to the correct bus number and device number.
-+
-+ - device_type: must be "pci"
-+
-+ If a given sub-node represents a PCI bridge it must have following
-+ mandatory properties as well:
-+
-+ - #address-cells: must be set to <3>
-+
-+ - #size-cells: must set to <2>
-+
-+ - #interrupt-cells: must be set to <1>
-+
-+ - interrupt-map-mask,
-+ - interrupt-map: standard PCI properties to define the mapping of the
-+ PCI interface to interrupt numbers.
-+
-+ Besides the required properties the sub-nodes may have these optional
-+ properties:
-+
-+ - status: indicates the operational status of the sub-node.
-+ Value must be either "disabled" or "okay".
-+
-+3) Example:
-+
-+ a) SoC specific dtsi file:
-+
-+ pci@10140000 {
-+ compatible = "ralink,rt3883-pci";
-+ reg = <0x10140000 0x20000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges; /* direct mapping */
-+
-+ status = "disabled";
-+
-+ pciintc: interrupt-controller {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <4>;
-+ };
-+
-+ host-bridge {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+
-+ device_type = "pci";
-+
-+ bus-range = <0 255>;
-+ ranges = <
-+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
-+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
-+ >;
-+
-+ interrupt-map-mask = <0xf800 0 0 7>;
-+ interrupt-map = <
-+ /* IDSEL 17 */
-+ 0x8800 0 0 1 &pciintc 18
-+ 0x8800 0 0 2 &pciintc 18
-+ 0x8800 0 0 3 &pciintc 18
-+ 0x8800 0 0 4 &pciintc 18
-+ /* IDSEL 18 */
-+ 0x9000 0 0 1 &pciintc 19
-+ 0x9000 0 0 2 &pciintc 19
-+ 0x9000 0 0 3 &pciintc 19
-+ 0x9000 0 0 4 &pciintc 19
-+ >;
-+
-+ pci-bridge@1 {
-+ reg = <0x0800 0 0 0 0>;
-+ device_type = "pci";
-+ #interrupt-cells = <1>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ interrupt-map-mask = <0x0 0 0 0>;
-+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
-+
-+ status = "disabled";
-+ };
-+
-+ pci-slot@17 {
-+ reg = <0x8800 0 0 0 0>;
-+ device_type = "pci";
-+
-+ status = "disabled";
-+ };
-+
-+ pci-slot@18 {
-+ reg = <0x9000 0 0 0 0>;
-+ device_type = "pci";
-+
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ b) Board specific dts file:
-+
-+ pci@10140000 {
-+ status = "okay";
-+
-+ host-bridge {
-+ pci-bridge@1 {
-+ status = "okay";
-+ };
-+ };
-+ };
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/pci-rt3883.c
-@@ -0,0 +1,636 @@
-+/*
-+ * Ralink RT3662/RT3883 SoC PCI support
-+ *
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/rt3883.h>
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define RT3883_MEMORY_BASE 0x00000000
-+#define RT3883_MEMORY_SIZE 0x02000000
-+
-+#define RT3883_PCI_REG_PCICFG 0x00
-+#define RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
-+#define RT3883_PCICFG_P2P_BR_DEVNUM_S 16
-+#define RT3883_PCICFG_PCIRST BIT(1)
-+#define RT3883_PCI_REG_PCIRAW 0x04
-+#define RT3883_PCI_REG_PCIINT 0x08
-+#define RT3883_PCI_REG_PCIENA 0x0c
-+
-+#define RT3883_PCI_REG_CFGADDR 0x20
-+#define RT3883_PCI_REG_CFGDATA 0x24
-+#define RT3883_PCI_REG_MEMBASE 0x28
-+#define RT3883_PCI_REG_IOBASE 0x2c
-+#define RT3883_PCI_REG_ARBCTL 0x80
-+
-+#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000)
-+#define RT3883_PCI_REG_BAR0SETUP(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10)
-+#define RT3883_PCI_REG_IMBASEBAR0(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18)
-+#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30)
-+#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34)
-+#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38)
-+#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50)
-+
-+#define RT3883_PCI_MODE_NONE 0
-+#define RT3883_PCI_MODE_PCI BIT(0)
-+#define RT3883_PCI_MODE_PCIE BIT(1)
-+#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
-+
-+#define RT3883_PCI_IRQ_COUNT 32
-+
-+#define RT3883_P2P_BR_DEVNUM 1
-+
-+struct rt3883_pci_controller {
-+ void __iomem *base;
-+ spinlock_t lock;
-+
-+ struct device_node *intc_of_node;
-+ struct irq_domain *irq_domain;
-+
-+ struct pci_controller pci_controller;
-+ struct resource io_res;
-+ struct resource mem_res;
-+
-+ bool pcie_ready;
-+};
-+
-+static inline struct rt3883_pci_controller *
-+pci_bus_to_rt3883_controller(struct pci_bus *bus)
-+{
-+ struct pci_controller *hose;
-+
-+ hose = (struct pci_controller *) bus->sysdata;
-+ return container_of(hose, struct rt3883_pci_controller, pci_controller);
-+}
-+
-+static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
-+ unsigned reg)
-+{
-+ return ioread32(rpc->base + reg);
-+}
-+
-+static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
-+ u32 val, unsigned reg)
-+{
-+ iowrite32(val, rpc->base + reg);
-+}
-+
-+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
-+ unsigned int func, unsigned int where)
-+{
-+ return (bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
-+ 0x80000000;
-+}
-+
-+static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
-+ unsigned bus, unsigned slot,
-+ unsigned func, unsigned reg)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 ret;
-+
-+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
-+
-+ spin_lock_irqsave(&rpc->lock, flags);
-+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
-+ ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
-+ spin_unlock_irqrestore(&rpc->lock, flags);
-+
-+ return ret;
-+}
-+
-+static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
-+ unsigned bus, unsigned slot,
-+ unsigned func, unsigned reg, u32 val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+
-+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
-+
-+ spin_lock_irqsave(&rpc->lock, flags);
-+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
-+ rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
-+ spin_unlock_irqrestore(&rpc->lock, flags);
-+}
-+
-+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ u32 pending;
-+
-+ rpc = irq_get_handler_data(irq);
-+
-+ pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
-+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
-+
-+ if (!pending) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ while (pending) {
-+ unsigned bit = __ffs(pending);
-+
-+ irq = irq_find_mapping(rpc->irq_domain, bit);
-+ generic_handle_irq(irq);
-+
-+ pending &= ~BIT(bit);
-+ }
-+}
-+
-+static void rt3883_pci_irq_unmask(struct irq_data *d)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ u32 t;
-+
-+ rpc = irq_data_get_irq_chip_data(d);
-+
-+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
-+ rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
-+ /* flush write */
-+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
-+}
-+
-+static void rt3883_pci_irq_mask(struct irq_data *d)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ u32 t;
-+
-+ rpc = irq_data_get_irq_chip_data(d);
-+
-+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
-+ rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
-+ /* flush write */
-+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
-+}
-+
-+static struct irq_chip rt3883_pci_irq_chip = {
-+ .name = "RT3883 PCI",
-+ .irq_mask = rt3883_pci_irq_mask,
-+ .irq_unmask = rt3883_pci_irq_unmask,
-+ .irq_mask_ack = rt3883_pci_irq_mask,
-+};
-+
-+static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
-+ irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, d->host_data);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
-+ .map = rt3883_pci_irq_map,
-+ .xlate = irq_domain_xlate_onecell,
-+};
-+
-+static int rt3883_pci_irq_init(struct device *dev,
-+ struct rt3883_pci_controller *rpc)
-+{
-+ int irq;
-+
-+ irq = irq_of_parse_and_map(rpc->intc_of_node, 0);
-+ if (irq == 0) {
-+ dev_err(dev, "%s has no IRQ",
-+ of_node_full_name(rpc->intc_of_node));
-+ return -EINVAL;
-+ }
-+
-+ /* disable all interrupts */
-+ rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
-+
-+ rpc->irq_domain =
-+ irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
-+ &rt3883_pci_irq_domain_ops,
-+ rpc);
-+ if (!rpc->irq_domain) {
-+ dev_err(dev, "unable to add IRQ domain\n");
-+ return -ENODEV;
-+ }
-+
-+ irq_set_handler_data(irq, rpc);
-+ irq_set_chained_handler(irq, rt3883_pci_irq_handler);
-+
-+ return 0;
-+}
-+
-+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ rpc = pci_bus_to_rt3883_controller(bus);
-+
-+ if (!rpc->pcie_ready && bus->number == 1)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rpc->lock, flags);
-+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
-+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
-+ spin_unlock_irqrestore(&rpc->lock, flags);
-+
-+ switch (size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ rpc = pci_bus_to_rt3883_controller(bus);
-+
-+ if (!rpc->pcie_ready && bus->number == 1)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rpc->lock, flags);
-+ rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
-+ data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
-+
-+ switch (size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ break;
-+ }
-+
-+ rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
-+ spin_unlock_irqrestore(&rpc->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops rt3883_pci_ops = {
-+ .read = rt3883_pci_config_read,
-+ .write = rt3883_pci_config_write,
-+};
-+
-+static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
-+{
-+ u32 syscfg1;
-+ u32 rstctrl;
-+ u32 clkcfg1;
-+ u32 t;
-+
-+ rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+ syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
-+ clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
-+
-+ if (mode & RT3883_PCI_MODE_PCIE) {
-+ rstctrl |= RT3883_RSTCTRL_PCIE;
-+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
-+
-+ /* setup PCI PAD drive mode */
-+ syscfg1 &= ~(0x30);
-+ syscfg1 |= (2 << 4);
-+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+ t &= ~BIT(31);
-+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
-+ t &= 0x80ffffff;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
-+ t |= 0xa << 24;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+ t |= BIT(31);
-+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+
-+ msleep(50);
-+
-+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
-+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
-+ }
-+
-+ syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
-+
-+ clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
-+
-+ if (mode & RT3883_PCI_MODE_PCI) {
-+ clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
-+ rstctrl &= ~RT3883_RSTCTRL_PCI;
-+ }
-+
-+ if (mode & RT3883_PCI_MODE_PCIE) {
-+ clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
-+ rstctrl &= ~RT3883_RSTCTRL_PCIE;
-+ }
-+
-+ rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
-+ rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
-+ rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
-+
-+ msleep(500);
-+
-+ /*
-+ * setup the device number of the P2P bridge
-+ * and de-assert the reset line
-+ */
-+ t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
-+ rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
-+
-+ /* flush write */
-+ rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
-+ msleep(500);
-+
-+ if (mode & RT3883_PCI_MODE_PCIE) {
-+ msleep(500);
-+
-+ t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
-+
-+ rpc->pcie_ready = t & BIT(0);
-+
-+ if (!rpc->pcie_ready) {
-+ /* reset the PCIe block */
-+ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+ t |= RT3883_RSTCTRL_PCIE;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+ t &= ~RT3883_RSTCTRL_PCIE;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+
-+ /* turn off PCIe clock */
-+ t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
-+ t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+ t &= ~0xf000c080;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
-+ }
-+ }
-+
-+ /* enable PCI arbiter */
-+ rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
-+}
-+
-+static int rt3883_pci_probe(struct platform_device *pdev)
-+{
-+ struct rt3883_pci_controller *rpc;
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ struct resource *res;
-+ struct device_node *child;
-+ u32 val;
-+ int err;
-+ int mode;
-+
-+ rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
-+ if (!rpc)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -EINVAL;
-+
-+ rpc->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(rpc->base))
-+ return PTR_ERR(rpc->base);
-+
-+ /* find the interrupt controller child node */
-+ for_each_child_of_node(np, child) {
-+ if (of_get_property(child, "interrupt-controller", NULL) &&
-+ of_node_get(child)) {
-+ rpc->intc_of_node = child;
-+ break;
-+ }
-+ }
-+
-+ if (!rpc->intc_of_node) {
-+ dev_err(dev, "%s has no %s child node",
-+ of_node_full_name(rpc->intc_of_node),
-+ "interrupt controller");
-+ return -EINVAL;
-+ }
-+
-+ /* find the PCI host bridge child node */
-+ for_each_child_of_node(np, child) {
-+ if (child->type &&
-+ of_node_cmp(child->type, "pci") == 0 &&
-+ of_node_get(child)) {
-+ rpc->pci_controller.of_node = child;
-+ break;
-+ }
-+ }
-+
-+ if (!rpc->pci_controller.of_node) {
-+ dev_err(dev, "%s has no %s child node",
-+ of_node_full_name(rpc->intc_of_node),
-+ "PCI host bridge");
-+ err = -EINVAL;
-+ goto err_put_intc_node;
-+ }
-+
-+ mode = RT3883_PCI_MODE_NONE;
-+ for_each_available_child_of_node(rpc->pci_controller.of_node, child) {
-+ int devfn;
-+
-+ if (!child->type ||
-+ of_node_cmp(child->type, "pci") != 0)
-+ continue;
-+
-+ devfn = of_pci_get_devfn(child);
-+ if (devfn < 0)
-+ continue;
-+
-+ switch (PCI_SLOT(devfn)) {
-+ case 1:
-+ mode |= RT3883_PCI_MODE_PCIE;
-+ break;
-+
-+ case 17:
-+ case 18:
-+ mode |= RT3883_PCI_MODE_PCI;
-+ break;
-+ }
-+ }
-+
-+ if (mode == RT3883_PCI_MODE_NONE) {
-+ dev_err(dev, "unable to determine PCI mode\n");
-+ err = -EINVAL;
-+ goto err_put_hb_node;
-+ }
-+
-+ dev_info(dev, "mode:%s%s\n",
-+ (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
-+ (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
-+
-+ rt3883_pci_preinit(rpc, mode);
-+
-+ rpc->pci_controller.pci_ops = &rt3883_pci_ops;
-+ rpc->pci_controller.io_resource = &rpc->io_res;
-+ rpc->pci_controller.mem_resource = &rpc->mem_res;
-+
-+ /* Load PCI I/O and memory resources from DT */
-+ pci_load_of_ranges(&rpc->pci_controller,
-+ rpc->pci_controller.of_node);
-+
-+ rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
-+ rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
-+
-+ ioport_resource.start = rpc->io_res.start;
-+ ioport_resource.end = rpc->io_res.end;
-+
-+ /* PCI */
-+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
-+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
-+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
-+ rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
-+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
-+
-+ /* PCIe */
-+ rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
-+ rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
-+ rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
-+ rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
-+ rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
-+
-+ err = rt3883_pci_irq_init(dev, rpc);
-+ if (err)
-+ goto err_put_hb_node;
-+
-+ /* PCIe */
-+ val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
-+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-+ rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
-+
-+ /* PCI */
-+ val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
-+ val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-+ rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
-+
-+ if (mode == RT3883_PCI_MODE_PCIE) {
-+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
-+ rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
-+
-+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
-+ PCI_BASE_ADDRESS_0,
-+ RT3883_MEMORY_BASE);
-+ /* flush write */
-+ rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
-+ PCI_BASE_ADDRESS_0);
-+ } else {
-+ rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
-+ PCI_IO_BASE, 0x00000101);
-+ }
-+
-+ register_pci_controller(&rpc->pci_controller);
-+
-+ return 0;
-+
-+err_put_hb_node:
-+ of_node_put(rpc->pci_controller.of_node);
-+err_put_intc_node:
-+ of_node_put(rpc->intc_of_node);
-+ return err;
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ struct of_irq dev_irq;
-+ int err;
-+ int irq;
-+
-+ err = of_irq_map_pci(dev, &dev_irq);
-+ if (err) {
-+ pr_err("pci %s: unable to get irq map, err=%d\n",
-+ pci_name((struct pci_dev *) dev), err);
-+ return 0;
-+ }
-+
-+ irq = irq_create_of_mapping(dev_irq.controller,
-+ dev_irq.specifier,
-+ dev_irq.size);
-+
-+ if (irq == 0)
-+ pr_crit("pci %s: no irq found for pin %u\n",
-+ pci_name((struct pci_dev *) dev), pin);
-+ else
-+ pr_info("pci %s: using irq %d for pin %u\n",
-+ pci_name((struct pci_dev *) dev), irq, pin);
-+
-+ return irq;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id rt3883_pci_ids[] = {
-+ { .compatible = "ralink,rt3883-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
-+
-+static struct platform_driver rt3883_pci_driver = {
-+ .probe = rt3883_pci_probe,
-+ .driver = {
-+ .name = "rt3883-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(rt3883_pci_ids),
-+ },
-+};
-+
-+static int __init rt3883_pci_init(void)
-+{
-+ return platform_driver_register(&rt3883_pci_driver);
-+}
-+
-+postcore_initcall(rt3883_pci_init);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -26,6 +26,7 @@ choice
- bool "RT3883"
- select USB_ARCH_HAS_OHCI
- select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-
- config SOC_MT7620
- bool "MT7620"
diff --git a/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
deleted file mode 100644
index 1d2e728..0000000
--- a/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 1be15a87eea5f26fb24b6aac332530cd3e2d984e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 100/133] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/cevt-r4k.c | 39 ++++++++++++++++++++++++++-------------
- 1 file changed, 26 insertions(+), 13 deletions(-)
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long
-
- #endif /* CONFIG_MIPS_MT_SMTC */
-
--void mips_set_clock_mode(enum clock_event_mode mode,
-- struct clock_event_device *evt)
--{
-- /* Nothing to do ... */
--}
--
- DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
- int cp0_timer_irq_installed;
-
-@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction =
- .name = "timer",
- };
-
-+void mips_set_clock_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evt)
-+{
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ if (cp0_timer_irq_installed)
-+ break;
-+
-+ cp0_timer_irq_installed = 1;
-+
-+ setup_irq(evt->irq, &c0_compare_irqaction);
-+ break;
-+
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ if (!cp0_timer_irq_installed)
-+ break;
-+
-+ cp0_timer_irq_installed = 0;
-+ free_irq(evt->irq, &c0_compare_irqaction);
-+ break;
-+
-+ default:
-+ pr_err("Unhandeled mips clock_mode\n");
-+ break;
-+ }
-+#endif
-+}
-
- void mips_event_handler(struct clock_event_device *dev)
- {
-+
- }
-
- /*
-@@ -215,12 +238,14 @@ int __cpuinit r4k_clockevent_init(void)
- #endif
- clockevents_register_device(cd);
-
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- if (cp0_timer_irq_installed)
- return 0;
-
- cp0_timer_irq_installed = 1;
-
- setup_irq(irq, &c0_compare_irqaction);
-+#endif
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch
deleted file mode 100644
index 5a7d5f9..0000000
--- a/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 5689333e7e4396a827a2cb6fa1242159e9af56de Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 20 May 2013 20:57:09 +0200
-Subject: [PATCH 101/133] MIPS: ralink: add verbose pmu info
-
-Print the PMU and LDO settings on boot.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -26,6 +26,22 @@
- #define CLKCFG_FFRAC_MASK 0x001f
- #define CLKCFG_FFRAC_USB_VAL 0x0003
-
-+/* analog */
-+#define PMU0_CFG 0x88
-+#define PMU_SW_SET BIT(28)
-+#define A_DCDC_EN BIT(24)
-+#define A_SSC_PERI BIT(19)
-+#define A_SSC_GEN BIT(18)
-+#define A_SSC_M 0x3
-+#define A_SSC_S 16
-+#define A_DLY_M 0x7
-+#define A_DLY_S 8
-+#define A_VTUNE_M 0xff
-+
-+/* digital */
-+#define PMU1_CFG 0x8C
-+#define DIG_SW_SEL BIT(25)
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -208,6 +224,8 @@ void prom_soc_init(struct ralink_soc_inf
- u32 n1;
- u32 rev;
- u32 cfg0;
-+ u32 pmu0;
-+ u32 pmu1;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-@@ -255,4 +273,12 @@ void prom_soc_init(struct ralink_soc_inf
- BUG();
- }
- soc_info->mem_base = MT7620_DRAM_BASE;
-+
-+ pmu0 = __raw_readl(sysc + PMU0_CFG);
-+ pmu1 = __raw_readl(sysc + PMU1_CFG);
-+
-+ pr_info("Analog PMU set to %s control\n",
-+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
-+ pr_info("Digital PMU set to %s control\n",
-+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
- }
diff --git a/target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch
deleted file mode 100644
index e295a4a..0000000
--- a/target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 23d18a1b3d0a7e5faa08b6bece6692667c930975 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 May 2013 15:50:31 +0200
-Subject: [PATCH 102/133] MIPS: ralink: adds a bootrom dumper module
-
-This patch adds a trivial driver that allows userland to extract the bootrom of
-a SoC via debugfs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile | 2 ++
- arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 50 insertions(+)
- create mode 100644 arch/mips/ralink/bootrom.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -17,4 +17,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-+obj-$(CONFIG_DEBUG_FS) += bootrom.o
-+
- obj-y += dts/
---- /dev/null
-+++ b/arch/mips/ralink/bootrom.c
-@@ -0,0 +1,48 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+#define BOOTROM_OFFSET 0x10118000
-+#define BOOTROM_SIZE 0x8000
-+
-+static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
-+
-+static int bootrom_show(struct seq_file *s, void *unused)
-+{
-+ seq_write(s, membase, BOOTROM_SIZE);
-+
-+ return 0;
-+}
-+
-+static int bootrom_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, bootrom_show, NULL);
-+}
-+
-+static const struct file_operations bootrom_file_ops = {
-+ .open = bootrom_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static int bootrom_setup(void)
-+{
-+ if (!debugfs_create_file("bootrom", 0444,
-+ NULL, NULL, &bootrom_file_ops)) {
-+ pr_err("Failed to create bootrom debugfs file\n");
-+
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+postcore_initcall(bootrom_setup);
diff --git a/target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch
deleted file mode 100644
index 4dfa7b5..0000000
--- a/target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From c5fe00f24f56b15f982dda355089986d57488b36 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 16 May 2013 23:28:23 +0200
-Subject: [PATCH 103/133] MIPS: ralink: add illegal access driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile | 2 +
- arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 89 insertions(+)
- create mode 100644 arch/mips/ralink/ill_acc.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o
-
- obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-
-+obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
-+
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
- obj-$(CONFIG_SOC_RT3883) += rt3883.o
---- /dev/null
-+++ b/arch/mips/ralink/ill_acc.c
-@@ -0,0 +1,87 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define REG_ILL_ACC_ADDR 0x10
-+#define REG_ILL_ACC_TYPE 0x14
-+
-+#define ILL_INT_STATUS BIT(31)
-+#define ILL_ACC_WRITE BIT(30)
-+#define ILL_ACC_LEN_M 0xff
-+#define ILL_ACC_OFF_M 0xf
-+#define ILL_ACC_OFF_S 16
-+#define ILL_ACC_ID_M 0x7
-+#define ILL_ACC_ID_S 8
-+
-+#define DRV_NAME "ill_acc"
-+
-+static const char *ill_acc_ids[] = {
-+ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
-+};
-+
-+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
-+{
-+ struct device *dev = (struct device *) _priv;
-+ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
-+ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
-+
-+ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
-+ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
-+ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
-+ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
-+ type & ILL_ACC_LEN_M);
-+
-+ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init ill_acc_of_setup(void)
-+{
-+ struct platform_device *pdev;
-+ struct device_node *np;
-+ int irq;
-+
-+ /* somehow this driver breaks on RT5350 */
-+ if (of_machine_is_compatible("ralink,rt5350-soc"))
-+ return -EINVAL;
-+
-+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
-+ if (!np)
-+ return -EINVAL;
-+
-+ pdev = of_find_device_by_node(np);
-+ if (!pdev) {
-+ pr_err("%s: failed to lookup pdev\n", np->name);
-+ return -EINVAL;
-+ }
-+
-+ irq = irq_of_parse_and_map(np, 0);
-+ if (!irq) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+
-+ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return -EINVAL;
-+ }
-+
-+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
-+
-+ dev_info(&pdev->dev, "irq registered\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(ill_acc_of_setup);
diff --git a/target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch
deleted file mode 100644
index c9a12b3..0000000
--- a/target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From b83808826ac7a5c727f5314b5a3bf07fcd6ec929 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 23 May 2013 18:50:56 +0200
-Subject: [PATCH 104/133] MIPS: ralink: workaround DTB memory issue
-
-If the DTB is too big a bug happens on boot when init ram is freed.
-This is a temporary fix until the real cause is found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -74,7 +74,7 @@ void __init device_tree_init(void)
- unflatten_device_tree();
-
- /* free the space reserved for the dt blob */
-- free_bootmem(base, size);
-+ //free_bootmem(base, size);
- }
-
- void __init plat_mem_setup(void)
diff --git a/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch b/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
deleted file mode 100644
index e9b30e0..0000000
--- a/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 6f72aea69951479b7daad1d38b506ede4f8a1676 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:38:07 +0000
-Subject: [PATCH 105/133] MIPS: ralink: add missing clk_set_rate() to clk.c
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/clk.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/mips/ralink/clk.c
-+++ b/arch/mips/ralink/clk.c
-@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *c
- }
- EXPORT_SYMBOL_GPL(clk_get_rate);
-
-+int clk_set_rate(struct clk *clk, unsigned long rate)
-+{
-+ return -1;
-+}
-+EXPORT_SYMBOL_GPL(clk_set_rate);
-+
- void __init plat_time_init(void)
- {
- struct clk *clk;
diff --git a/target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch b/target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch
deleted file mode 100644
index bb1ff7d..0000000
--- a/target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 45ba0675286e2a71f6a577833ab13b951bb7e31a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:40:02 +0000
-Subject: [PATCH 106/133] MIPS: ralink: add support for MT7620n
-
-This is the small version of MT7620a.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++-----
- arch/mips/ralink/mt7620.c | 19 ++++++++++++-------
- 2 files changed, 14 insertions(+), 12 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -24,11 +24,8 @@
- #define SYSC_REG_CPLL_CONFIG0 0x54
- #define SYSC_REG_CPLL_CONFIG1 0x58
-
--#define MT7620N_CHIP_NAME0 0x33365452
--#define MT7620N_CHIP_NAME1 0x20203235
--
--#define MT7620A_CHIP_NAME0 0x3637544d
--#define MT7620A_CHIP_NAME1 0x20203032
-+#define MT7620_CHIP_NAME0 0x3637544d
-+#define MT7620_CHIP_NAME1 0x20203032
-
- #define CHIP_REV_PKG_MASK 0x1
- #define CHIP_REV_PKG_SHIFT 16
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -226,22 +226,27 @@ void prom_soc_init(struct ralink_soc_inf
- u32 cfg0;
- u32 pmu0;
- u32 pmu1;
-+ u32 bga;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-+ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
-
-- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
-- name = "MT7620N";
-- soc_info->compatible = "ralink,mt7620n-soc";
-- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
-+ if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
-+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-+
-+ if (bga) {
- name = "MT7620A";
- soc_info->compatible = "ralink,mt7620a-soc";
- } else {
-- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-+ name = "MT7620N";
-+ soc_info->compatible = "ralink,mt7620n-soc";
-+#ifdef CONFIG_PCI
-+ panic("mt7620n is only supported for non pci kernels");
-+#endif
- }
-
-- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
--
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %s ver:%u eco:%u",
- name,
diff --git a/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch b/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch
deleted file mode 100644
index 4fb2b2b..0000000
--- a/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From ee46d05eefefb0fb40b5682b4f6f3876b496044b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:40:48 +0000
-Subject: [PATCH 107/133] MIPS: ralink: allow manual memory override
-
-RT5350 relies on the bootloader setting up the memc correctly.
-On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range
-.
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 16 +++++++++++++++-
- 1 file changed, 15 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -77,6 +77,17 @@ void __init device_tree_init(void)
- //free_bootmem(base, size);
- }
-
-+static int memory_dtb;
-+
-+static int __init early_init_dt_find_memory(unsigned long node, const char *uname,
-+ int depth, void *data)
-+{
-+ if (depth == 1 && !strcmp(uname, "memory@0"))
-+ memory_dtb = 1;
-+
-+ return 0;
-+}
-+
- void __init plat_mem_setup(void)
- {
- set_io_port_base(KSEG1);
-@@ -87,7 +98,10 @@ void __init plat_mem_setup(void)
- */
- __dt_setup_arch(&__dtb_start);
-
-- if (soc_info.mem_size)
-+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
-+ if (memory_dtb)
-+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-+ else if (soc_info.mem_size)
- add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
- BOOT_MEM_RAM);
- else
diff --git a/target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch
deleted file mode 100644
index 6d9c0d3..0000000
--- a/target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 1fe4d719d1c973c01f4b6a4c0de47bfac77e3eca Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 19 May 2013 00:42:23 +0200
-Subject: [PATCH 108/133] MIPS: ralink: add rt_sysc_m32 helper
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
-+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned r
- return __raw_readl(rt_sysc_membase + reg);
- }
-
-+static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
-+{
-+ u32 val = rt_sysc_r32(reg) & ~clr;
-+
-+ __raw_writel(val | set, rt_sysc_membase + reg);
-+}
-+
- static inline void rt_memc_w32(u32 val, unsigned reg)
- {
- __raw_writel(val, rt_memc_membase + reg);
diff --git a/target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch b/target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
deleted file mode 100644
index 193374e..0000000
--- a/target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From ca21f813087ca5a8b02ec00efcd9c3f3fbf3bc1f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 24 Mar 2013 17:17:17 +0100
-Subject: [PATCH 109/133] MIPS: ralink: add pseudo pwm led trigger based on
- timer0
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 197 insertions(+), 16 deletions(-)
-
---- a/arch/mips/ralink/timer.c
-+++ b/arch/mips/ralink/timer.c
-@@ -12,6 +12,8 @@
- #include <linux/timer.h>
- #include <linux/of_gpio.h>
- #include <linux/clk.h>
-+#include <linux/leds.h>
-+#include <linux/slab.h>
-
- #include <asm/mach-ralink/ralink_regs.h>
-
-@@ -23,16 +25,34 @@
-
- #define TMR0CTL_ENABLE BIT(7)
- #define TMR0CTL_MODE_PERIODIC BIT(4)
--#define TMR0CTL_PRESCALER 1
-+#define TMR0CTL_PRESCALER 2
- #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
- #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
-
-+struct rt_timer_gpio {
-+ struct list_head list;
-+ struct led_classdev *led;
-+};
-+
- struct rt_timer {
-- struct device *dev;
-- void __iomem *membase;
-- int irq;
-- unsigned long timer_freq;
-- unsigned long timer_div;
-+ struct device *dev;
-+ void __iomem *membase;
-+ int irq;
-+
-+ unsigned long timer_freq;
-+ unsigned long timer_div;
-+
-+ struct list_head gpios;
-+ struct led_trigger led_trigger;
-+ unsigned int duty_cycle;
-+ unsigned int duty;
-+
-+ unsigned int fade;
-+ unsigned int fade_min;
-+ unsigned int fade_max;
-+ unsigned int fade_speed;
-+ unsigned int fade_dir;
-+ unsigned int fade_count;
- };
-
- static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
- static irqreturn_t rt_timer_irq(int irq, void *_rt)
- {
- struct rt_timer *rt = (struct rt_timer *) _rt;
-+ struct rt_timer_gpio *gpio;
-+ unsigned int val;
-
-- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-+ if (rt->fade && (rt->fade_count++ > rt->fade_speed)) {
-+ rt->fade_count = 0;
-+ if (rt->duty_cycle <= rt->fade_min)
-+ rt->fade_dir = 1;
-+ else if (rt->duty_cycle >= rt->fade_max)
-+ rt->fade_dir = 0;
-+
-+ if (rt->fade_dir)
-+ rt->duty_cycle += 1;
-+ else
-+ rt->duty_cycle -= 1;
-+
-+ }
-+
-+ val = rt->timer_freq / rt->timer_div;
-+ if (rt->duty)
-+ val *= rt->duty_cycle;
-+ else
-+ val *= (100 - rt->duty_cycle);
-+ val /= 100;
-+
-+ if (!list_empty(&rt->gpios))
-+ list_for_each_entry(gpio, &rt->gpios, list)
-+ led_set_brightness(gpio->led, !!rt->duty);
-+
-+ rt->duty = !rt->duty;
-+
-+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1);
- rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
-
- return IRQ_HANDLED;
- }
-
--
- static int rt_timer_request(struct rt_timer *rt)
- {
-- int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
-- dev_name(rt->dev), rt);
-+ int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq,
-+ IRQF_DISABLED, dev_name(rt->dev), rt);
- if (err) {
- dev_err(rt->dev, "failed to request irq\n");
- } else {
-@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
- else
- rt->timer_div = divisor;
-
-- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
--
- return 0;
- }
-
-@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
- rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
- }
-
-+static ssize_t led_fade_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+
-+ return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max);
-+}
-+
-+static ssize_t led_fade_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t size)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ unsigned int speed = 0, min = 0, max = 0;
-+ ssize_t ret = -EINVAL;
-+
-+ ret = sscanf(buf, "%u %u %u", &speed, &min, &max);
-+
-+ if (ret == 3) {
-+ rt->fade_speed = speed;
-+ rt->fade_min = min;
-+ rt->fade_max = max;
-+ rt->fade = 1;
-+ } else {
-+ rt->fade = 0;
-+ }
-+
-+ return size;
-+}
-+
-+static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store);
-+
-+static ssize_t led_duty_cycle_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+
-+ return sprintf(buf, "%u\n", rt->duty_cycle);
-+}
-+
-+static ssize_t led_duty_cycle_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t size)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ unsigned long state;
-+ ssize_t ret = -EINVAL;
-+
-+ ret = kstrtoul(buf, 10, &state);
-+ if (ret)
-+ return ret;
-+
-+ if (state <= 100)
-+ rt->duty_cycle = state;
-+ else
-+ rt->duty_cycle = 100;
-+
-+ rt->fade = 0;
-+
-+ return size;
-+}
-+
-+static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store);
-+
-+static void rt_timer_trig_activate(struct led_classdev *led_cdev)
-+{
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ struct rt_timer_gpio *gpio_data;
-+ int rc;
-+
-+ led_cdev->trigger_data = NULL;
-+ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
-+ if (!gpio_data)
-+ return;
-+
-+ rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle);
-+ if (rc)
-+ goto err_gpio;
-+ rc = device_create_file(led_cdev->dev, &dev_attr_fade);
-+ if (rc)
-+ goto err_out_duty_cycle;
-+
-+ led_cdev->activated = true;
-+ led_cdev->trigger_data = gpio_data;
-+ gpio_data->led = led_cdev;
-+ list_add(&gpio_data->list, &rt->gpios);
-+ led_cdev->trigger_data = gpio_data;
-+ rt_timer_enable(rt);
-+ return;
-+
-+err_out_duty_cycle:
-+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
-+
-+err_gpio:
-+ kfree(gpio_data);
-+}
-+
-+static void rt_timer_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data;
-+
-+ if (led_cdev->activated) {
-+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
-+ device_remove_file(led_cdev->dev, &dev_attr_fade);
-+ led_cdev->activated = false;
-+ }
-+
-+ list_del(&gpio_data->list);
-+ rt_timer_disable(rt);
-+ led_set_brightness(led_cdev, LED_OFF);
-+}
-+
- static int rt_timer_probe(struct platform_device *pdev)
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const __be32 *divisor;
- struct rt_timer *rt;
- struct clk *clk;
-+ int ret;
-
- rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
- if (!rt) {
-@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platfor
- if (!rt->timer_freq)
- return -EINVAL;
-
-+ rt->duty_cycle = 100;
- rt->dev = &pdev->dev;
- platform_set_drvdata(pdev, rt);
-
-- rt_timer_request(rt);
-- rt_timer_config(rt, 2);
-- rt_timer_enable(rt);
-+ ret = rt_timer_request(rt);
-+ if (ret)
-+ return ret;
-+
-+ divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL);
-+ if (divisor)
-+ rt_timer_config(rt, be32_to_cpu(*divisor));
-+ else
-+ rt_timer_config(rt, 200);
-+
-+ rt->led_trigger.name = "pwmtimer",
-+ rt->led_trigger.activate = rt_timer_trig_activate,
-+ rt->led_trigger.deactivate = rt_timer_trig_deactivate,
-+
-+ ret = led_trigger_register(&rt->led_trigger);
-+ if (ret)
-+ return ret;
-+
-+ INIT_LIST_HEAD(&rt->gpios);
-
- dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
-
-@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platfo
- {
- struct rt_timer *rt = platform_get_drvdata(pdev);
-
-+ led_trigger_unregister(&rt->led_trigger);
- rt_timer_disable(rt);
- rt_timer_free(rt);
-
-@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_d
-
- module_platform_driver(rt_timer_driver);
-
--MODULE_DESCRIPTION("Ralink RT2880 timer");
-+MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
- MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch b/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
deleted file mode 100644
index 7a64640..0000000
--- a/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f57edea9db0f7f437bc4f2ae408f6dd8bfbb9062 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:53:02 +0000
-Subject: [PATCH 110/133] MIPS: ralink: add a helper for reading the ECO
- version
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -79,4 +79,9 @@
- #define MT7620_GPIO_MODE_EPHY BIT(15)
- #define MT7620_GPIO_MODE_WDT BIT(22)
-
-+static inline int mt7620_get_eco(void)
-+{
-+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
-+}
-+
- #endif
diff --git a/target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch
deleted file mode 100644
index 2aafd00..0000000
--- a/target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch
+++ /dev/null
@@ -1,662 +0,0 @@
-From 2d7e32d4825e20e9db4f0dff6b3e3c25c8c7ad7d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 3 Dec 2013 17:05:05 +0100
-Subject: [PATCH 111/133] DMA: ralink: add rt2880 dma engine
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/dma/Kconfig | 6 +
- drivers/dma/Makefile | 1 +
- drivers/dma/dmaengine.c | 26 ++
- drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
- include/linux/dmaengine.h | 1 +
- 5 files changed, 611 insertions(+)
- create mode 100644 drivers/dma/ralink-gdma.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -312,6 +312,12 @@ config MMP_PDMA
- help
- Support the MMP PDMA engine for PXA and MMP platfrom.
-
-+config DMA_RALINK
-+ tristate "RALINK DMA support"
-+ depends on RALINK && SOC_MT7620
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+
- config DMA_ENGINE
- bool
-
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
- obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
- obj-$(CONFIG_DMA_OMAP) += omap-dma.o
- obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
-+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
---- a/drivers/dma/dmaengine.c
-+++ b/drivers/dma/dmaengine.c
-@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat
- }
-
- /**
-+ * dma_request_slave_channel - try to get specific channel exclusively
-+ * @chan: target channel
-+ */
-+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan)
-+{
-+ int err = -EBUSY;
-+
-+ /* lock against __dma_request_channel */
-+ mutex_lock(&dma_list_mutex);
-+
-+ if (chan->client_count == 0) {
-+ err = dma_chan_get(chan);
-+ if (err)
-+ pr_debug("%s: failed to get %s: (%d)\n",
-+ __func__, dma_chan_name(chan), err);
-+ } else
-+ chan = NULL;
-+
-+ mutex_unlock(&dma_list_mutex);
-+
-+ return chan;
-+}
-+EXPORT_SYMBOL_GPL(dma_get_slave_channel);
-+
-+
-+/**
- * dma_request_channel - try to allocate an exclusive channel
- * @mask: capabilities that the channel must satisfy
- * @fn: optional callback to disposition available channels
---- /dev/null
-+++ b/drivers/dma/ralink-gdma.c
-@@ -0,0 +1,577 @@
-+/*
-+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
-+ * GDMA4740 DMAC support
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/of_dma.h>
-+
-+#include "virt-dma.h"
-+
-+#define GDMA_NR_CHANS 16
-+
-+#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
-+#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
-+
-+#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
-+#define GDMA_REG_CTRL0_TX_MASK 0xffff
-+#define GDMA_REG_CTRL0_TX_SHIFT 16
-+#define GDMA_REG_CTRL0_CURR_MASK 0xff
-+#define GDMA_REG_CTRL0_CURR_SHIFT 8
-+#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
-+#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
-+#define GDMA_REG_CTRL0_BURST_MASK 0x7
-+#define GDMA_REG_CTRL0_BURST_SHIFT 3
-+#define GDMA_REG_CTRL0_DONE_INT BIT(2)
-+#define GDMA_REG_CTRL0_ENABLE BIT(1)
-+#define GDMA_REG_CTRL0_HW_MODE 0
-+
-+#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
-+#define GDMA_REG_CTRL1_SEG_MASK 0xf
-+#define GDMA_REG_CTRL1_SEG_SHIFT 22
-+#define GDMA_REG_CTRL1_REQ_MASK 0x3f
-+#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
-+#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
-+#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
-+#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
-+#define GDMA_REG_CTRL1_NEXT_SHIFT 3
-+#define GDMA_REG_CTRL1_COHERENT BIT(2)
-+#define GDMA_REG_CTRL1_FAIL BIT(1)
-+#define GDMA_REG_CTRL1_MASK BIT(0)
-+
-+#define GDMA_REG_UNMASK_INT 0x200
-+#define GDMA_REG_DONE_INT 0x204
-+
-+#define GDMA_REG_GCT 0x220
-+#define GDMA_REG_GCT_CHAN_MASK 0x3
-+#define GDMA_REG_GCT_CHAN_SHIFT 3
-+#define GDMA_REG_GCT_VER_MASK 0x3
-+#define GDMA_REG_GCT_VER_SHIFT 1
-+#define GDMA_REG_GCT_ARBIT_RR BIT(0)
-+
-+enum gdma_dma_transfer_size {
-+ GDMA_TRANSFER_SIZE_4BYTE = 0,
-+ GDMA_TRANSFER_SIZE_8BYTE = 1,
-+ GDMA_TRANSFER_SIZE_16BYTE = 2,
-+ GDMA_TRANSFER_SIZE_32BYTE = 3,
-+};
-+
-+struct gdma_dma_sg {
-+ dma_addr_t addr;
-+ unsigned int len;
-+};
-+
-+struct gdma_dma_desc {
-+ struct virt_dma_desc vdesc;
-+
-+ enum dma_transfer_direction direction;
-+ bool cyclic;
-+
-+ unsigned int num_sgs;
-+ struct gdma_dma_sg sg[];
-+};
-+
-+struct gdma_dmaengine_chan {
-+ struct virt_dma_chan vchan;
-+ unsigned int id;
-+
-+ dma_addr_t fifo_addr;
-+ unsigned int transfer_shift;
-+
-+ struct gdma_dma_desc *desc;
-+ unsigned int next_sg;
-+};
-+
-+struct gdma_dma_dev {
-+ struct dma_device ddev;
-+ void __iomem *base;
-+ struct clk *clk;
-+
-+ struct gdma_dmaengine_chan chan[GDMA_NR_CHANS];
-+};
-+
-+static struct gdma_dma_dev *gdma_dma_chan_get_dev(
-+ struct gdma_dmaengine_chan *chan)
-+{
-+ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
-+ ddev);
-+}
-+
-+static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
-+{
-+ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
-+}
-+
-+static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
-+{
-+ return container_of(vdesc, struct gdma_dma_desc, vdesc);
-+}
-+
-+static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
-+ unsigned int reg)
-+{
-+ return readl(dma_dev->base + reg);
-+}
-+
-+static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
-+ unsigned reg, uint32_t val)
-+{
-+ //printk("gdma --> %p = 0x%08X\n", dma_dev->base + reg, val);
-+ writel(val, dma_dev->base + reg);
-+}
-+
-+static inline void gdma_dma_write_mask(struct gdma_dma_dev *dma_dev,
-+ unsigned int reg, uint32_t val, uint32_t mask)
-+{
-+ uint32_t tmp;
-+
-+ tmp = gdma_dma_read(dma_dev, reg);
-+ tmp &= ~mask;
-+ tmp |= val;
-+ gdma_dma_write(dma_dev, reg, tmp);
-+}
-+
-+static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
-+{
-+ return kzalloc(sizeof(struct gdma_dma_desc) +
-+ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
-+}
-+
-+static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
-+{
-+ if (maxburst <= 7)
-+ return GDMA_TRANSFER_SIZE_4BYTE;
-+ else if (maxburst <= 15)
-+ return GDMA_TRANSFER_SIZE_8BYTE;
-+ else if (maxburst <= 31)
-+ return GDMA_TRANSFER_SIZE_16BYTE;
-+
-+ return GDMA_TRANSFER_SIZE_32BYTE;
-+}
-+
-+static int gdma_dma_slave_config(struct dma_chan *c,
-+ const struct dma_slave_config *config)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ enum gdma_dma_transfer_size transfer_size;
-+ uint32_t flags;
-+ uint32_t ctrl0, ctrl1;
-+
-+ switch (config->direction) {
-+ case DMA_MEM_TO_DEV:
-+ ctrl1 = 32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
-+ ctrl1 |= config->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT;
-+ flags = GDMA_REG_CTRL0_DST_ADDR_FIXED;
-+ transfer_size = gdma_dma_maxburst(config->dst_maxburst);
-+ chan->fifo_addr = config->dst_addr;
-+ break;
-+
-+ case DMA_DEV_TO_MEM:
-+ ctrl1 = config->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
-+ ctrl1 |= 32 << GDMA_REG_CTRL1_DST_REQ_SHIFT;
-+ flags = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
-+ transfer_size = gdma_dma_maxburst(config->src_maxburst);
-+ chan->fifo_addr = config->src_addr;
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ chan->transfer_shift = 1 + transfer_size;
-+
-+ ctrl0 = flags | GDMA_REG_CTRL0_HW_MODE;
-+ ctrl0 |= GDMA_REG_CTRL0_DONE_INT;
-+
-+ ctrl1 &= ~(GDMA_REG_CTRL1_NEXT_MASK << GDMA_REG_CTRL1_NEXT_SHIFT);
-+ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
-+ ctrl1 |= GDMA_REG_CTRL1_FAIL;
-+ ctrl1 &= ~GDMA_REG_CTRL1_CONTINOUS;
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
-+
-+ return 0;
-+}
-+
-+static int gdma_dma_terminate_all(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
-+ GDMA_REG_CTRL0_ENABLE);
-+ chan->desc = NULL;
-+ vchan_get_all_descriptors(&chan->vchan, &head);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ vchan_dma_desc_free_list(&chan->vchan, &head);
-+
-+ return 0;
-+}
-+
-+static int gdma_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-+ unsigned long arg)
-+{
-+ struct dma_slave_config *config = (struct dma_slave_config *)arg;
-+
-+ switch (cmd) {
-+ case DMA_SLAVE_CONFIG:
-+ return gdma_dma_slave_config(chan, config);
-+ case DMA_TERMINATE_ALL:
-+ return gdma_dma_terminate_all(chan);
-+ default:
-+ return -ENOSYS;
-+ }
-+}
-+
-+static int gdma_dma_start_transfer(struct gdma_dmaengine_chan *chan)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ dma_addr_t src_addr, dst_addr;
-+ struct virt_dma_desc *vdesc;
-+ struct gdma_dma_sg *sg;
-+
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
-+ GDMA_REG_CTRL0_ENABLE);
-+
-+ if (!chan->desc) {
-+ vdesc = vchan_next_desc(&chan->vchan);
-+ if (!vdesc)
-+ return 0;
-+ chan->desc = to_gdma_dma_desc(vdesc);
-+ chan->next_sg = 0;
-+ }
-+
-+ if (chan->next_sg == chan->desc->num_sgs)
-+ chan->next_sg = 0;
-+
-+ sg = &chan->desc->sg[chan->next_sg];
-+
-+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
-+ src_addr = sg->addr;
-+ dst_addr = chan->fifo_addr;
-+ } else {
-+ src_addr = chan->fifo_addr;
-+ dst_addr = sg->addr;
-+ }
-+ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id),
-+ (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | GDMA_REG_CTRL0_ENABLE,
-+ GDMA_REG_CTRL0_TX_MASK << GDMA_REG_CTRL0_TX_SHIFT);
-+ chan->next_sg++;
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL1(chan->id), 0, GDMA_REG_CTRL1_MASK);
-+
-+ return 0;
-+}
-+
-+static void gdma_dma_chan_irq(struct gdma_dmaengine_chan *chan)
-+{
-+ spin_lock(&chan->vchan.lock);
-+ if (chan->desc) {
-+ if (chan->desc && chan->desc->cyclic) {
-+ vchan_cyclic_callback(&chan->desc->vdesc);
-+ } else {
-+ if (chan->next_sg == chan->desc->num_sgs) {
-+ chan->desc = NULL;
-+ vchan_cookie_complete(&chan->desc->vdesc);
-+ }
-+ }
-+ }
-+ gdma_dma_start_transfer(chan);
-+ spin_unlock(&chan->vchan.lock);
-+}
-+
-+static irqreturn_t gdma_dma_irq(int irq, void *devid)
-+{
-+ struct gdma_dma_dev *dma_dev = devid;
-+ uint32_t unmask, done;
-+ unsigned int i;
-+
-+ unmask = gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT);
-+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, unmask);
-+ done = gdma_dma_read(dma_dev, GDMA_REG_DONE_INT);
-+
-+ for (i = 0; i < GDMA_NR_CHANS; ++i)
-+ if (done & BIT(i))
-+ gdma_dma_chan_irq(&dma_dev->chan[i]);
-+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void gdma_dma_issue_pending(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
-+ gdma_dma_start_transfer(chan);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
-+ struct dma_chan *c, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ struct scatterlist *sg;
-+ unsigned int i;
-+
-+ desc = gdma_dma_alloc_desc(sg_len);
-+ if (!desc)
-+ return NULL;
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ desc->sg[i].addr = sg_dma_address(sg);
-+ desc->sg[i].len = sg_dma_len(sg);
-+ }
-+
-+ desc->num_sgs = sg_len;
-+ desc->direction = direction;
-+ desc->cyclic = false;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
-+ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
-+ size_t period_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ unsigned int num_periods, i;
-+
-+ if (buf_len % period_len)
-+ return NULL;
-+
-+ num_periods = buf_len / period_len;
-+
-+ desc = gdma_dma_alloc_desc(num_periods);
-+ if (!desc)
-+ return NULL;
-+
-+ for (i = 0; i < num_periods; i++) {
-+ desc->sg[i].addr = buf_addr;
-+ desc->sg[i].len = period_len;
-+ buf_addr += period_len;
-+ }
-+
-+ desc->num_sgs = num_periods;
-+ desc->direction = direction;
-+ desc->cyclic = true;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static size_t gdma_dma_desc_residue(struct gdma_dmaengine_chan *chan,
-+ struct gdma_dma_desc *desc, unsigned int next_sg)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned int residue, count;
-+ unsigned int i;
-+
-+ residue = 0;
-+
-+ for (i = next_sg; i < desc->num_sgs; i++)
-+ residue += desc->sg[i].len;
-+
-+ if (next_sg != 0) {
-+ count = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
-+ count >>= GDMA_REG_CTRL0_CURR_SHIFT;
-+ count &= GDMA_REG_CTRL0_CURR_MASK;
-+ residue += count << chan->transfer_shift;
-+ }
-+
-+ return residue;
-+}
-+
-+static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie, struct dma_tx_state *state)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct virt_dma_desc *vdesc;
-+ enum dma_status status;
-+ unsigned long flags;
-+
-+ status = dma_cookie_status(c, cookie, state);
-+ if (status == DMA_SUCCESS || !state)
-+ return status;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ vdesc = vchan_find_desc(&chan->vchan, cookie);
-+ if (cookie == chan->desc->vdesc.tx.cookie) {
-+ state->residue = gdma_dma_desc_residue(chan, chan->desc,
-+ chan->next_sg);
-+ } else if (vdesc) {
-+ state->residue = gdma_dma_desc_residue(chan,
-+ to_gdma_dma_desc(vdesc), 0);
-+ } else {
-+ state->residue = 0;
-+ }
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ return status;
-+}
-+
-+static int gdma_dma_alloc_chan_resources(struct dma_chan *c)
-+{
-+ return 0;
-+}
-+
-+static void gdma_dma_free_chan_resources(struct dma_chan *c)
-+{
-+ vchan_free_chan_resources(to_virt_chan(c));
-+}
-+
-+static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
-+{
-+ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
-+}
-+
-+static struct dma_chan *
-+of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
-+ struct of_dma *ofdma)
-+{
-+ struct gdma_dma_dev *dma_dev = ofdma->of_dma_data;
-+ unsigned int request = dma_spec->args[0];
-+
-+ if (request >= GDMA_NR_CHANS)
-+ return NULL;
-+
-+ return dma_get_slave_channel(&(dma_dev->chan[request].vchan.chan));
-+}
-+
-+static int gdma_dma_probe(struct platform_device *pdev)
-+{
-+ struct gdma_dmaengine_chan *chan;
-+ struct gdma_dma_dev *dma_dev;
-+ struct dma_device *dd;
-+ unsigned int i;
-+ struct resource *res;
-+ uint32_t gct;
-+ int ret;
-+ int irq;
-+
-+
-+ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
-+ if (!dma_dev)
-+ return -EINVAL;
-+
-+ dd = &dma_dev->ddev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ dma_dev->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(dma_dev->base))
-+ return PTR_ERR(dma_dev->base);
-+
-+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
-+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-+ dd->device_alloc_chan_resources = gdma_dma_alloc_chan_resources;
-+ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
-+ dd->device_tx_status = gdma_dma_tx_status;
-+ dd->device_issue_pending = gdma_dma_issue_pending;
-+ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
-+ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
-+ dd->device_control = gdma_dma_control;
-+ dd->dev = &pdev->dev;
-+ dd->chancnt = GDMA_NR_CHANS;
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ for (i = 0; i < dd->chancnt; i++) {
-+ chan = &dma_dev->chan[i];
-+ chan->id = i;
-+ chan->vchan.desc_free = gdma_dma_desc_free;
-+ vchan_init(&chan->vchan, dd);
-+ }
-+
-+ ret = dma_async_device_register(dd);
-+ if (ret)
-+ return ret;
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id, dma_dev);
-+ if (ret)
-+ goto err_unregister;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(irq, gdma_dma_irq, 0, dev_name(&pdev->dev), dma_dev);
-+ if (ret)
-+ goto err_unregister;
-+
-+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, 0);
-+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, BIT(dd->chancnt) - 1);
-+
-+ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
-+ dev_info(&pdev->dev, "revision: %d, channels: %d\n",
-+ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
-+ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) & GDMA_REG_GCT_CHAN_MASK));
-+ platform_set_drvdata(pdev, dma_dev);
-+
-+ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
-+
-+ return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+ return ret;
-+}
-+
-+static int gdma_dma_remove(struct platform_device *pdev)
-+{
-+ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
-+ int irq = platform_get_irq(pdev, 0);
-+
-+ free_irq(irq, dma_dev);
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&dma_dev->ddev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id gdma_of_match_table[] = {
-+ { .compatible = "ralink,rt2880-gdma" },
-+ { },
-+};
-+
-+static struct platform_driver gdma_dma_driver = {
-+ .probe = gdma_dma_probe,
-+ .remove = gdma_dma_remove,
-+ .driver = {
-+ .name = "gdma-rt2880",
-+ .owner = THIS_MODULE,
-+ .of_match_table = gdma_of_match_table,
-+ },
-+};
-+module_platform_driver(gdma_dma_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-+MODULE_DESCRIPTION("GDMA4740 DMA driver");
-+MODULE_LICENSE("GPLv2");
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -999,6 +999,7 @@ static inline void dma_release_channel(s
- int dma_async_device_register(struct dma_device *device);
- void dma_async_device_unregister(struct dma_device *device);
- void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
-+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
- struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
- struct dma_chan *net_dma_find_channel(void);
- #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
diff --git a/target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch
deleted file mode 100644
index 469d2e4..0000000
--- a/target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch
+++ /dev/null
@@ -1,711 +0,0 @@
-From d4398d880eba386cb85d0a1a2ba39a336876dc0a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 3 Dec 2013 20:18:13 +0100
-Subject: [PATCH 112/133] asoc: add mt7620 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 +
- sound/soc/Kconfig | 1 +
- sound/soc/Makefile | 1 +
- sound/soc/ralink/Kconfig | 15 ++
- sound/soc/ralink/Makefile | 11 +
- sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++
- sound/soc/soc-io.c | 10 -
- 8 files changed, 621 insertions(+), 10 deletions(-)
- create mode 100644 sound/soc/ralink/Kconfig
- create mode 100644 sound/soc/ralink/Makefile
- create mode 100644 sound/soc/ralink/mt7620-i2s.c
- create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -15,6 +15,7 @@
- #include <linux/of_fdt.h>
- #include <linux/kernel.h>
- #include <linux/bootmem.h>
-+#include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
-
-@@ -25,6 +26,7 @@
- #include "common.h"
-
- __iomem void *rt_sysc_membase;
-+EXPORT_SYMBOL(rt_sysc_membase);
- __iomem void *rt_memc_membase;
-
- extern struct boot_param_header __dtb_start;
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -48,6 +48,7 @@ source "sound/soc/kirkwood/Kconfig"
- source "sound/soc/mid-x86/Kconfig"
- source "sound/soc/mxs/Kconfig"
- source "sound/soc/pxa/Kconfig"
-+source "sound/soc/ralink/Kconfig"
- source "sound/soc/samsung/Kconfig"
- source "sound/soc/s6000/Kconfig"
- source "sound/soc/sh/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/
- obj-$(CONFIG_SND_SOC) += omap/
- obj-$(CONFIG_SND_SOC) += kirkwood/
- obj-$(CONFIG_SND_SOC) += pxa/
-+obj-$(CONFIG_SND_SOC) += ralink/
- obj-$(CONFIG_SND_SOC) += samsung/
- obj-$(CONFIG_SND_SOC) += s6000/
- obj-$(CONFIG_SND_SOC) += sh/
---- /dev/null
-+++ b/sound/soc/ralink/Kconfig
-@@ -0,0 +1,15 @@
-+config SND_MT7620_SOC_I2S
-+ depends on SOC_MT7620 && SND_SOC
-+ select SND_SOC_GENERIC_DMAENGINE_PCM
-+ tristate "SoC Audio (I2S protocol) for Ralink MT7620 SoC"
-+ help
-+ Say Y if you want to use I2S protocol and I2S codec on Ingenic MT7620
-+ based boards.
-+
-+config SND_MT7620_SOC_WM8960
-+ tristate "SoC Audio support for Ralink WM8960"
-+ select SND_MT7620_SOC_I2S
-+ select SND_SOC_WM8960
-+ help
-+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
-+ a.k.a Qi Ben NanoNote.
---- /dev/null
-+++ b/sound/soc/ralink/Makefile
-@@ -0,0 +1,11 @@
-+#
-+# Jz4740 Platform Support
-+#
-+snd-soc-mt7620-i2s-objs := mt7620-i2s.o
-+
-+obj-$(CONFIG_SND_MT7620_SOC_I2S) += snd-soc-mt7620-i2s.o
-+
-+# Jz4740 Machine Support
-+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
-+
-+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
---- /dev/null
-+++ b/sound/soc/ralink/mt7620-i2s.c
-@@ -0,0 +1,466 @@
-+/*
-+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include <linux/delay.h>
-+
-+#include <linux/dma-mapping.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/initval.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <ralink_regs.h>
-+
-+#define I2S_REG_CFG0 0x00
-+#define I2S_REG_CFG0_EN BIT(31)
-+#define I2S_REG_CFG0_DMA_EN BIT(30)
-+#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
-+#define I2S_REG_CFG0_TX_EN BIT(24)
-+#define I2S_REG_CFG0_RX_EN BIT(20)
-+#define I2S_REG_CFG0_SLAVE BIT(16)
-+#define I2S_REG_CFG0_RX_THRES 12
-+#define I2S_REG_CFG0_TX_THRES 4
-+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+
-+#define I2S_REG_INT_STATUS 0x04
-+#define I2S_REG_INT_EN 0x08
-+#define I2S_REG_FF_STATUS 0x0c
-+#define I2S_REG_WREG 0x10
-+#define I2S_REG_RREG 0x14
-+#define I2S_REG_CFG1 0x18
-+
-+#define I2S_REG_DIVCMP 0x20
-+#define I2S_REG_DIVINT 0x24
-+#define I2S_REG_CLK_EN BIT(31)
-+
-+struct mt7620_i2s {
-+ struct resource *mem;
-+ void __iomem *base;
-+ dma_addr_t phys_base;
-+
-+ struct snd_dmaengine_dai_dma_data playback_dma_data;
-+ struct snd_dmaengine_dai_dma_data capture_dma_data;
-+};
-+
-+static inline uint32_t mt7620_i2s_read(const struct mt7620_i2s *i2s,
-+ unsigned int reg)
-+{
-+ return readl(i2s->base + reg);
-+}
-+
-+static inline void mt7620_i2s_write(const struct mt7620_i2s *i2s,
-+ unsigned int reg, uint32_t value)
-+{
-+ //printk("i2s --> %p = 0x%08X\n", i2s->base + reg, value);
-+ writel(value, i2s->base + reg);
-+}
-+
-+static int mt7620_i2s_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active)
-+ return 0;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg |= I2S_REG_CFG0_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static void mt7620_i2s_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active)
-+ return;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg &= ~I2S_REG_CFG0_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+}
-+
-+static int mt7620_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ uint32_t cfg;
-+ uint32_t mask;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ mask = I2S_REG_CFG0_TX_EN;
-+ else
-+ mask = I2S_REG_CFG0_RX_EN;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ cfg |= mask;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ cfg &= ~mask;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (cfg & (I2S_REG_CFG0_TX_EN | I2S_REG_CFG0_RX_EN))
-+ cfg |= I2S_REG_CFG0_DMA_EN;
-+ else
-+ cfg &= ~I2S_REG_CFG0_DMA_EN;
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+
-+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+ case SND_SOC_DAIFMT_CBS_CFS:
-+ cfg |= I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBM_CFM:
-+ cfg &= ~I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBM_CFS:
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+ case SND_SOC_DAIFMT_I2S:
-+ case SND_SOC_DAIFMT_MSB:
-+ cfg &= ~I2S_REG_CFG0_BYTE_SWAP;
-+ break;
-+ case SND_SOC_DAIFMT_LSB:
-+ cfg |= I2S_REG_CFG0_BYTE_SWAP;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+ case SND_SOC_DAIFMT_NB_NF:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-+{
-+
-+ return 0;
-+}
-+
-+unsigned long i2sMaster_inclk_int[11] = {
-+ 78, 56, 52, 39, 28, 26, 19, 14, 13, 9, 6};
-+unsigned long i2sMaster_inclk_comp[11] = {
-+ 64, 352, 42, 32, 176, 21, 272, 88, 10, 455, 261};
-+
-+
-+static int mt7620_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
-+ unsigned int freq, int dir)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ printk("Internal REFCLK with fractional division\n");
-+
-+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
-+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
-+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
-+
-+/* struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ struct clk *parent;
-+ int ret = 0;
-+
-+ switch (clk_id) {
-+ case JZ4740_I2S_CLKSRC_EXT:
-+ parent = clk_get(NULL, "ext");
-+ clk_set_parent(i2s->clk_i2s, parent);
-+ break;
-+ case JZ4740_I2S_CLKSRC_PLL:
-+ parent = clk_get(NULL, "pll half");
-+ clk_set_parent(i2s->clk_i2s, parent);
-+ ret = clk_set_rate(i2s->clk_i2s, freq);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ clk_put(parent);
-+
-+ return ret;*/
-+ return 0;
-+}
-+
-+static int mt7620_i2s_suspend(struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active) {
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg &= ~I2S_REG_CFG0_TX_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_resume(struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active) {
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg |= I2S_REG_CFG0_TX_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+ }
-+
-+ return 0;
-+}
-+
-+static void mt7620_i2c_init_pcm_config(struct mt7620_i2s *i2s)
-+{
-+ struct snd_dmaengine_dai_dma_data *dma_data;
-+
-+ /* Playback */
-+ dma_data = &i2s->playback_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = 2; //JZ4740_DMA_TYPE_AIC_TRANSMIT;
-+ dma_data->addr = i2s->phys_base + I2S_REG_WREG;
-+
-+ /* Capture */
-+ dma_data = &i2s->capture_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = 3; //JZ4740_DMA_TYPE_AIC_RECEIVE;
-+ dma_data->addr = i2s->phys_base + I2S_REG_RREG;
-+}
-+
-+static int mt7620_i2s_dai_probe(struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t data;
-+
-+ mt7620_i2c_init_pcm_config(i2s);
-+ dai->playback_dma_data = &i2s->playback_dma_data;
-+ dai->capture_dma_data = &i2s->capture_dma_data;
-+
-+ /* set share pins to i2s/gpio mode and i2c mode */
-+ data = rt_sysc_r32(0x60);
-+ data &= 0xFFFFFFE2;
-+ data |= 0x00000018;
-+ rt_sysc_w32(data, 0x60);
-+
-+ printk("Internal REFCLK with fractional division\n");
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, I2S_REG_CFG0_DFT_THRES);
-+ mt7620_i2s_write(i2s, I2S_REG_CFG1, 0);
-+ mt7620_i2s_write(i2s, I2S_REG_INT_EN, 0);
-+
-+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
-+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
-+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_dai_remove(struct snd_soc_dai *dai)
-+{
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops mt7620_i2s_dai_ops = {
-+ .startup = mt7620_i2s_startup,
-+ .shutdown = mt7620_i2s_shutdown,
-+ .trigger = mt7620_i2s_trigger,
-+ .hw_params = mt7620_i2s_hw_params,
-+ .set_fmt = mt7620_i2s_set_fmt,
-+ .set_sysclk = mt7620_i2s_set_sysclk,
-+};
-+
-+#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \
-+ SNDRV_PCM_FMTBIT_S16_LE)
-+
-+static struct snd_soc_dai_driver mt7620_i2s_dai = {
-+ .probe = mt7620_i2s_dai_probe,
-+ .remove = mt7620_i2s_dai_remove,
-+ .playback = {
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .formats = JZ4740_I2S_FMTS,
-+ },
-+ .capture = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .formats = JZ4740_I2S_FMTS,
-+ },
-+ .symmetric_rates = 1,
-+ .ops = &mt7620_i2s_dai_ops,
-+ .suspend = mt7620_i2s_suspend,
-+ .resume = mt7620_i2s_resume,
-+};
-+
-+static const struct snd_pcm_hardware mt7620_pcm_hardware = {
-+ .info = SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID |
-+ SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
-+ .period_bytes_min = PAGE_SIZE,
-+ .period_bytes_max = 64 * 1024,
-+ .periods_min = 2,
-+ .periods_max = 128,
-+ .buffer_bytes_max = 128 * 1024,
-+ .fifo_size = 32,
-+};
-+
-+static const struct snd_dmaengine_pcm_config mt7620_dmaengine_pcm_config = {
-+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+ .pcm_hardware = &mt7620_pcm_hardware,
-+ .prealloc_buffer_size = 256 * PAGE_SIZE,
-+};
-+
-+static const struct snd_soc_component_driver mt7620_i2s_component = {
-+ .name = "mt7620-i2s",
-+};
-+
-+static int mt7620_i2s_dev_probe(struct platform_device *pdev)
-+{
-+ struct mt7620_i2s *i2s;
-+ int ret;
-+
-+ snd_dmaengine_pcm_register(&pdev->dev,
-+ &mt7620_dmaengine_pcm_config,
-+ SND_DMAENGINE_PCM_FLAG_COMPAT);
-+
-+ i2s = kzalloc(sizeof(*i2s), GFP_KERNEL);
-+ if (!i2s)
-+ return -ENOMEM;
-+
-+ i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!i2s->mem) {
-+ ret = -ENOENT;
-+ goto err_free;
-+ }
-+
-+ i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem),
-+ pdev->name);
-+ if (!i2s->mem) {
-+ ret = -EBUSY;
-+ goto err_free;
-+ }
-+
-+ i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem));
-+ if (!i2s->base) {
-+ ret = -EBUSY;
-+ goto err_release_mem_region;
-+ }
-+
-+ i2s->phys_base = i2s->mem->start;
-+
-+ platform_set_drvdata(pdev, i2s);
-+ ret = snd_soc_register_component(&pdev->dev, &mt7620_i2s_component,
-+ &mt7620_i2s_dai, 1);
-+
-+ if (!ret) {
-+ dev_err(&pdev->dev, "loaded\n");
-+ return ret;
-+ }
-+
-+ dev_err(&pdev->dev, "Failed to register DAI\n");
-+ iounmap(i2s->base);
-+
-+err_release_mem_region:
-+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
-+err_free:
-+ kfree(i2s);
-+
-+ return ret;
-+}
-+
-+static int mt7620_i2s_dev_remove(struct platform_device *pdev)
-+{
-+ struct mt7620_i2s *i2s = platform_get_drvdata(pdev);
-+
-+ snd_soc_unregister_component(&pdev->dev);
-+
-+ iounmap(i2s->base);
-+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
-+
-+ kfree(i2s);
-+
-+ snd_dmaengine_pcm_unregister(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620_i2s_match[] = {
-+ { .compatible = "ralink,mt7620a-i2s" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7620_i2s_match);
-+
-+static struct platform_driver mt7620_i2s_driver = {
-+ .probe = mt7620_i2s_dev_probe,
-+ .remove = mt7620_i2s_dev_remove,
-+ .driver = {
-+ .name = "mt7620-i2s",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7620_i2s_match,
-+ },
-+};
-+
-+module_platform_driver(mt7620_i2s_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:mt7620-i2s");
---- /dev/null
-+++ b/sound/soc/ralink/mt7620-wm8960.c
-@@ -0,0 +1,125 @@
-+/*
-+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/of.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+
-+
-+static const struct snd_soc_dapm_widget mt7620_wm8960_widgets[] = {
-+ SND_SOC_DAPM_SPK("Speaker", NULL),
-+};
-+
-+static const struct snd_soc_dapm_route mt7620_wm8960_routes[] = {
-+ {"Speaker", NULL, "HP_L"},
-+ {"Speaker", NULL, "HP_R"},
-+};
-+
-+#define MT7620_DAIFMT (SND_SOC_DAIFMT_I2S | \
-+ SND_SOC_DAIFMT_NB_NF | \
-+ SND_SOC_DAIFMT_CBM_CFM)
-+
-+static int mt7620_wm8960_codec_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_soc_codec *codec = rtd->codec;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+ struct snd_soc_dapm_context *dapm = &codec->dapm;
-+ int ret;
-+
-+ snd_soc_dapm_enable_pin(dapm, "HP_L");
-+ snd_soc_dapm_enable_pin(dapm, "HP_R");
-+
-+ ret = snd_soc_dai_set_fmt(cpu_dai, MT7620_DAIFMT);
-+ if (ret < 0) {
-+ dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct snd_soc_dai_link mt7620_wm8960_dai = {
-+ .name = "mt7620",
-+ .stream_name = "mt7620",
-+ .init = mt7620_wm8960_codec_init,
-+ .codec_dai_name = "wm8960-hifi",
-+};
-+
-+static struct snd_soc_card mt7620_wm8960 = {
-+ .name = "mt7620-wm8960",
-+ .owner = THIS_MODULE,
-+ .dai_link = &mt7620_wm8960_dai,
-+ .num_links = 1,
-+
-+ .dapm_widgets = mt7620_wm8960_widgets,
-+ .num_dapm_widgets = ARRAY_SIZE(mt7620_wm8960_widgets),
-+ .dapm_routes = mt7620_wm8960_routes,
-+ .num_dapm_routes = ARRAY_SIZE(mt7620_wm8960_routes),
-+};
-+
-+static int mt7620_wm8960_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct snd_soc_card *card = &mt7620_wm8960;
-+ int ret;
-+
-+ card->dev = &pdev->dev;
-+
-+ mt7620_wm8960_dai.cpu_of_node = of_parse_phandle(np, "cpu-dai", 0);
-+ mt7620_wm8960_dai.codec_of_node = of_parse_phandle(np, "codec-dai", 0);
-+ mt7620_wm8960_dai.platform_of_node = mt7620_wm8960_dai.cpu_of_node;
-+
-+ ret = snd_soc_register_card(card);
-+ if (ret) {
-+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
-+ ret);
-+ }
-+ return ret;
-+}
-+
-+static int mt7620_wm8960_remove(struct platform_device *pdev)
-+{
-+ struct snd_soc_card *card = platform_get_drvdata(pdev);
-+
-+ snd_soc_unregister_card(card);
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620_audio_match[] = {
-+ { .compatible = "ralink,wm8960-audio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7620_audio_match);
-+
-+static struct platform_driver mt7620_wm8960_driver = {
-+ .driver = {
-+ .name = "wm8960-audio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7620_audio_match,
-+ },
-+ .probe = mt7620_wm8960_probe,
-+ .remove = mt7620_wm8960_remove,
-+};
-+
-+module_platform_driver(mt7620_wm8960_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-+MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qi-lb60-audio");
---- a/sound/soc/soc-io.c
-+++ b/sound/soc/soc-io.c
-@@ -19,7 +19,6 @@
-
- #include <trace/events/asoc.h>
-
--#ifdef CONFIG_REGMAP
- static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
- {
-@@ -161,12 +160,3 @@ int snd_soc_codec_set_cache_io(struct sn
- return PTR_RET(codec->control_data);
- }
- EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
--#else
--int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
-- int addr_bits, int data_bits,
-- enum snd_soc_control_type control)
--{
-- return -ENOTSUPP;
--}
--EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
--#endif
diff --git a/target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch
deleted file mode 100644
index b375059..0000000
--- a/target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch
+++ /dev/null
@@ -1,1311 +0,0 @@
-From 47bbf432252b39361728c7685292dc9f889e6537 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 19 Aug 2013 13:49:52 +0200
-Subject: [PATCH 113/133] pinctrl: ralink: add pinctrl driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 2 +
- arch/mips/include/asm/mach-ralink/mt7620.h | 41 ++-
- arch/mips/include/asm/mach-ralink/pinmux.h | 53 ++++
- arch/mips/include/asm/mach-ralink/rt305x.h | 34 +-
- arch/mips/include/asm/mach-ralink/rt3883.h | 16 +-
- arch/mips/ralink/common.h | 19 --
- arch/mips/ralink/mt7620.c | 161 ++++------
- arch/mips/ralink/rt305x.c | 146 ++++-----
- arch/mips/ralink/rt3883.c | 173 +++--------
- drivers/pinctrl/Kconfig | 5 +
- drivers/pinctrl/Makefile | 1 +
- drivers/pinctrl/pinctrl-rt2880.c | 467 ++++++++++++++++++++++++++++
- 12 files changed, 740 insertions(+), 378 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h
- create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -446,6 +446,8 @@ config RALINK
- select HAVE_MACH_CLKDEV
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
-+ select PINCTRL
-+ select PINCTRL_RT2880
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -56,7 +56,6 @@
- #define MT7620_DDR2_SIZE_MIN 32
- #define MT7620_DDR2_SIZE_MAX 256
-
--#define MT7620_GPIO_MODE_I2C BIT(0)
- #define MT7620_GPIO_MODE_UART0_SHIFT 2
- #define MT7620_GPIO_MODE_UART0_MASK 0x7
- #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
-@@ -68,16 +67,36 @@
- #define MT7620_GPIO_MODE_GPIO_UARTF 0x5
- #define MT7620_GPIO_MODE_GPIO_I2S 0x6
- #define MT7620_GPIO_MODE_GPIO 0x7
--#define MT7620_GPIO_MODE_UART1 BIT(5)
--#define MT7620_GPIO_MODE_MDIO BIT(8)
--#define MT7620_GPIO_MODE_RGMII1 BIT(9)
--#define MT7620_GPIO_MODE_RGMII2 BIT(10)
--#define MT7620_GPIO_MODE_SPI BIT(11)
--#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
--#define MT7620_GPIO_MODE_WLED BIT(13)
--#define MT7620_GPIO_MODE_JTAG BIT(15)
--#define MT7620_GPIO_MODE_EPHY BIT(15)
--#define MT7620_GPIO_MODE_WDT BIT(22)
-+
-+#define MT7620_GPIO_MODE_NAND 0
-+#define MT7620_GPIO_MODE_SD 1
-+#define MT7620_GPIO_MODE_ND_SD_GPIO 2
-+#define MT7620_GPIO_MODE_ND_SD_MASK 0x3
-+#define MT7620_GPIO_MODE_ND_SD_SHIFT 18
-+
-+#define MT7620_GPIO_MODE_PCIE_RST 0
-+#define MT7620_GPIO_MODE_PCIE_REF 1
-+#define MT7620_GPIO_MODE_PCIE_GPIO 2
-+#define MT7620_GPIO_MODE_PCIE_MASK 0x3
-+#define MT7620_GPIO_MODE_PCIE_SHIFT 16
-+
-+#define MT7620_GPIO_MODE_WDT_RST 0
-+#define MT7620_GPIO_MODE_WDT_REF 1
-+#define MT7620_GPIO_MODE_WDT_GPIO 2
-+#define MT7620_GPIO_MODE_WDT_MASK 0x3
-+#define MT7620_GPIO_MODE_WDT_SHIFT 21
-+
-+#define MT7620_GPIO_MODE_I2C 0
-+#define MT7620_GPIO_MODE_UART1 5
-+#define MT7620_GPIO_MODE_MDIO 8
-+#define MT7620_GPIO_MODE_RGMII1 9
-+#define MT7620_GPIO_MODE_RGMII2 10
-+#define MT7620_GPIO_MODE_SPI 11
-+#define MT7620_GPIO_MODE_SPI_REF_CLK 12
-+#define MT7620_GPIO_MODE_WLED 13
-+#define MT7620_GPIO_MODE_JTAG 15
-+#define MT7620_GPIO_MODE_EPHY 15
-+#define MT7620_GPIO_MODE_PA 20
-
- static inline int mt7620_get_eco(void)
- {
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
-@@ -0,0 +1,53 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RT288X_PINMUX_H__
-+#define _RT288X_PINMUX_H__
-+
-+#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count }
-+#define GRP(_name, _func, _mask, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _mask, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+#define GRP_G(_name, _func, _mask, _gpio, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _gpio, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+struct rt2880_pmx_group;
-+
-+struct rt2880_pmx_func {
-+ const char *name;
-+ const char value;
-+
-+ int pin_first;
-+ int pin_count;
-+ int *pins;
-+
-+ int *groups;
-+ int group_count;
-+
-+ int enabled;
-+};
-+
-+struct rt2880_pmx_group {
-+ const char *name;
-+ int enabled;
-+
-+ const u32 shift;
-+ const char mask;
-+ const char gpio;
-+
-+ struct rt2880_pmx_func *func;
-+ int func_count;
-+};
-+
-+extern struct rt2880_pmx_group *rt2880_pinmux_data;
-+
-+#endif
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -125,24 +125,28 @@ static inline int soc_is_rt5350(void)
- #define RT305X_GPIO_GE0_TXD0 40
- #define RT305X_GPIO_GE0_RXCLK 51
-
--#define RT305X_GPIO_MODE_I2C BIT(0)
--#define RT305X_GPIO_MODE_SPI BIT(1)
- #define RT305X_GPIO_MODE_UART0_SHIFT 2
- #define RT305X_GPIO_MODE_UART0_MASK 0x7
- #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
--#define RT305X_GPIO_MODE_UARTF 0x0
--#define RT305X_GPIO_MODE_PCM_UARTF 0x1
--#define RT305X_GPIO_MODE_PCM_I2S 0x2
--#define RT305X_GPIO_MODE_I2S_UARTF 0x3
--#define RT305X_GPIO_MODE_PCM_GPIO 0x4
--#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
--#define RT305X_GPIO_MODE_GPIO_I2S 0x6
--#define RT305X_GPIO_MODE_GPIO 0x7
--#define RT305X_GPIO_MODE_UART1 BIT(5)
--#define RT305X_GPIO_MODE_JTAG BIT(6)
--#define RT305X_GPIO_MODE_MDIO BIT(7)
--#define RT305X_GPIO_MODE_SDRAM BIT(8)
--#define RT305X_GPIO_MODE_RGMII BIT(9)
-+#define RT305X_GPIO_MODE_UARTF 0
-+#define RT305X_GPIO_MODE_PCM_UARTF 1
-+#define RT305X_GPIO_MODE_PCM_I2S 2
-+#define RT305X_GPIO_MODE_I2S_UARTF 3
-+#define RT305X_GPIO_MODE_PCM_GPIO 4
-+#define RT305X_GPIO_MODE_GPIO_UARTF 5
-+#define RT305X_GPIO_MODE_GPIO_I2S 6
-+#define RT305X_GPIO_MODE_GPIO 7
-+
-+#define RT305X_GPIO_MODE_I2C 0
-+#define RT305X_GPIO_MODE_SPI 1
-+#define RT305X_GPIO_MODE_UART1 5
-+#define RT305X_GPIO_MODE_JTAG 6
-+#define RT305X_GPIO_MODE_MDIO 7
-+#define RT305X_GPIO_MODE_SDRAM 8
-+#define RT305X_GPIO_MODE_RGMII 9
-+#define RT5350_GPIO_MODE_PHY_LED 14
-+#define RT3352_GPIO_MODE_LNA 18
-+#define RT3352_GPIO_MODE_PA 20
-
- #define RT3352_SYSC_REG_SYSCFG0 0x010
- #define RT3352_SYSC_REG_SYSCFG1 0x014
---- a/arch/mips/include/asm/mach-ralink/rt3883.h
-+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -112,8 +112,6 @@
- #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
- #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
-
--#define RT3883_GPIO_MODE_I2C BIT(0)
--#define RT3883_GPIO_MODE_SPI BIT(1)
- #define RT3883_GPIO_MODE_UART0_SHIFT 2
- #define RT3883_GPIO_MODE_UART0_MASK 0x7
- #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
-@@ -125,11 +123,15 @@
- #define RT3883_GPIO_MODE_GPIO_UARTF 0x5
- #define RT3883_GPIO_MODE_GPIO_I2S 0x6
- #define RT3883_GPIO_MODE_GPIO 0x7
--#define RT3883_GPIO_MODE_UART1 BIT(5)
--#define RT3883_GPIO_MODE_JTAG BIT(6)
--#define RT3883_GPIO_MODE_MDIO BIT(7)
--#define RT3883_GPIO_MODE_GE1 BIT(9)
--#define RT3883_GPIO_MODE_GE2 BIT(10)
-+
-+#define RT3883_GPIO_MODE_I2C 0
-+#define RT3883_GPIO_MODE_SPI 1
-+#define RT3883_GPIO_MODE_UART1 5
-+#define RT3883_GPIO_MODE_JTAG 6
-+#define RT3883_GPIO_MODE_MDIO 7
-+#define RT3883_GPIO_MODE_GE1 9
-+#define RT3883_GPIO_MODE_GE2 10
-+
- #define RT3883_GPIO_MODE_PCI_SHIFT 11
- #define RT3883_GPIO_MODE_PCI_MASK 0x7
- #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -11,25 +11,6 @@
-
- #define RAMIPS_SYS_TYPE_LEN 32
-
--struct ralink_pinmux_grp {
-- const char *name;
-- u32 mask;
-- int gpio_first;
-- int gpio_last;
--};
--
--struct ralink_pinmux {
-- struct ralink_pinmux_grp *mode;
-- struct ralink_pinmux_grp *uart;
-- int uart_shift;
-- u32 uart_mask;
-- void (*wdt_reset)(void);
-- struct ralink_pinmux_grp *pci;
-- int pci_shift;
-- u32 pci_mask;
--};
--extern struct ralink_pinmux rt_gpio_pinmux;
--
- struct ralink_soc_info {
- unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
- unsigned char *compatible;
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -17,6 +17,7 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7620.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
-@@ -48,118 +49,58 @@ static int dram_type;
- /* the pll dividers */
- static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = MT7620_GPIO_MODE_I2C,
-- .gpio_first = 1,
-- .gpio_last = 2,
-- }, {
-- .name = "spi",
-- .mask = MT7620_GPIO_MODE_SPI,
-- .gpio_first = 3,
-- .gpio_last = 6,
-- }, {
-- .name = "uartlite",
-- .mask = MT7620_GPIO_MODE_UART1,
-- .gpio_first = 15,
-- .gpio_last = 16,
-- }, {
-- .name = "wdt",
-- .mask = MT7620_GPIO_MODE_WDT,
-- .gpio_first = 17,
-- .gpio_last = 17,
-- }, {
-- .name = "mdio",
-- .mask = MT7620_GPIO_MODE_MDIO,
-- .gpio_first = 22,
-- .gpio_last = 23,
-- }, {
-- .name = "rgmii1",
-- .mask = MT7620_GPIO_MODE_RGMII1,
-- .gpio_first = 24,
-- .gpio_last = 35,
-- }, {
-- .name = "spi refclk",
-- .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
-- .gpio_first = 37,
-- .gpio_last = 39,
-- }, {
-- .name = "jtag",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- /* shared lines with jtag */
-- .name = "ephy",
-- .mask = MT7620_GPIO_MODE_EPHY,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- .name = "nand",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 45,
-- .gpio_last = 59,
-- }, {
-- .name = "rgmii2",
-- .mask = MT7620_GPIO_MODE_RGMII2,
-- .gpio_first = 60,
-- .gpio_last = 71,
-- }, {
-- .name = "wled",
-- .mask = MT7620_GPIO_MODE_WLED,
-- .gpio_first = 72,
-- .gpio_last = 72,
-- }, {0}
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-+static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-+static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-+static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-+static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-+static struct rt2880_pmx_func uartf_grp[] = {
-+ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = MT7620_GPIO_MODE_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm uartf",
-- .mask = MT7620_GPIO_MODE_PCM_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm i2s",
-- .mask = MT7620_GPIO_MODE_PCM_I2S,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "i2s uartf",
-- .mask = MT7620_GPIO_MODE_I2S_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm gpio",
-- .mask = MT7620_GPIO_MODE_PCM_GPIO,
-- .gpio_first = 11,
-- .gpio_last = 14,
-- }, {
-- .name = "gpio uartf",
-- .mask = MT7620_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio i2s",
-- .mask = MT7620_GPIO_MODE_GPIO_I2S,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio",
-- .mask = MT7620_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func wdt_grp[] = {
-+ FUNC("wdt rst", 0, 17, 1),
-+ FUNC("wdt refclk", 0, 17, 1),
-+ };
-+static struct rt2880_pmx_func pcie_rst_grp[] = {
-+ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
-+ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
-+};
-+static struct rt2880_pmx_func nd_sd_grp[] = {
-+ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-+ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
- };
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
-+static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
-+ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
-+ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
-+ MT7620_GPIO_MODE_UART0_SHIFT),
-+ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
-+ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
-+ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
-+ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
-+ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
-+ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
-+ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
-+ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
-+ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
-+ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
-+ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
-+ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
-+ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
-+ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
-+ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
-+ { 0 }
- };
-
- void __init ralink_clk_init(void)
-@@ -286,4 +227,6 @@ void prom_soc_init(struct ralink_soc_inf
- (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-+
-+ rt2880_pinmux_data = mt7620a_pinmux_data;
- }
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -17,90 +17,71 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt305x.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
- enum rt305x_soc_type rt305x_soc;
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT305X_GPIO_MODE_I2C,
-- .gpio_first = RT305X_GPIO_I2C_SD,
-- .gpio_last = RT305X_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT305X_GPIO_MODE_SPI,
-- .gpio_first = RT305X_GPIO_SPI_EN,
-- .gpio_last = RT305X_GPIO_SPI_CLK,
-- }, {
-- .name = "uartlite",
-- .mask = RT305X_GPIO_MODE_UART1,
-- .gpio_first = RT305X_GPIO_UART1_TXD,
-- .gpio_last = RT305X_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT305X_GPIO_MODE_JTAG,
-- .gpio_first = RT305X_GPIO_JTAG_TDO,
-- .gpio_last = RT305X_GPIO_JTAG_TDI,
-- }, {
-- .name = "mdio",
-- .mask = RT305X_GPIO_MODE_MDIO,
-- .gpio_first = RT305X_GPIO_MDIO_MDC,
-- .gpio_last = RT305X_GPIO_MDIO_MDIO,
-- }, {
-- .name = "sdram",
-- .mask = RT305X_GPIO_MODE_SDRAM,
-- .gpio_first = RT305X_GPIO_SDRAM_MD16,
-- .gpio_last = RT305X_GPIO_SDRAM_MD31,
-- }, {
-- .name = "rgmii",
-- .mask = RT305X_GPIO_MODE_RGMII,
-- .gpio_first = RT305X_GPIO_GE0_TXD0,
-- .gpio_last = RT305X_GPIO_GE0_RXCLK,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
-+};
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-+static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
-+static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-+static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-+static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-+static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-+
-+static struct rt2880_pmx_group rt3050_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
-+ { 0 }
-+};
-+
-+static struct rt2880_pmx_group rt3352_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
-+ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
-+ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
- };
-
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT305X_GPIO_MODE_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT305X_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT305X_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT305X_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT305X_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT305X_GPIO_10,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT305X_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT305X_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT305X_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_group rt5350_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
- };
-
- static void rt305x_wdt_reset(void)
-@@ -114,14 +95,6 @@ static void rt305x_wdt_reset(void)
- rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt305x_wdt_reset,
--};
--
- static unsigned long rt5350_get_mem_size(void)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -290,11 +263,14 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT305X_SDRAM_BASE;
- if (soc_is_rt5350()) {
- soc_info->mem_size = rt5350_get_mem_size();
-+ rt2880_pinmux_data = rt5350_pinmux_data;
- } else if (soc_is_rt305x() || soc_is_rt3350()) {
- soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3050_pinmux_data;
- } else if (soc_is_rt3352()) {
- soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3352_pinmux_data;
- }
- }
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -17,132 +17,50 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt3883.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT3883_GPIO_MODE_I2C,
-- .gpio_first = RT3883_GPIO_I2C_SD,
-- .gpio_last = RT3883_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT3883_GPIO_MODE_SPI,
-- .gpio_first = RT3883_GPIO_SPI_CS0,
-- .gpio_last = RT3883_GPIO_SPI_MISO,
-- }, {
-- .name = "uartlite",
-- .mask = RT3883_GPIO_MODE_UART1,
-- .gpio_first = RT3883_GPIO_UART1_TXD,
-- .gpio_last = RT3883_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT3883_GPIO_MODE_JTAG,
-- .gpio_first = RT3883_GPIO_JTAG_TDO,
-- .gpio_last = RT3883_GPIO_JTAG_TCLK,
-- }, {
-- .name = "mdio",
-- .mask = RT3883_GPIO_MODE_MDIO,
-- .gpio_first = RT3883_GPIO_MDIO_MDC,
-- .gpio_last = RT3883_GPIO_MDIO_MDIO,
-- }, {
-- .name = "ge1",
-- .mask = RT3883_GPIO_MODE_GE1,
-- .gpio_first = RT3883_GPIO_GE1_TXD0,
-- .gpio_last = RT3883_GPIO_GE1_RXCLK,
-- }, {
-- .name = "ge2",
-- .mask = RT3883_GPIO_MODE_GE2,
-- .gpio_first = RT3883_GPIO_GE2_TXD0,
-- .gpio_last = RT3883_GPIO_GE2_RXCLK,
-- }, {
-- .name = "pci",
-- .mask = RT3883_GPIO_MODE_PCI,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "lna a",
-- .mask = RT3883_GPIO_MODE_LNA_A,
-- .gpio_first = RT3883_GPIO_LNA_PE_A0,
-- .gpio_last = RT3883_GPIO_LNA_PE_A2,
-- }, {
-- .name = "lna g",
-- .mask = RT3883_GPIO_MODE_LNA_G,
-- .gpio_first = RT3883_GPIO_LNA_PE_G0,
-- .gpio_last = RT3883_GPIO_LNA_PE_G2,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT3883_GPIO_MODE_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT3883_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT3883_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT3883_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT3883_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT3883_GPIO_11,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT3883_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT3883_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT3883_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
-+static struct rt2880_pmx_func pci_func[] = {
-+ FUNC("pci-dev", 0, 40, 32),
-+ FUNC("pci-host2", 1, 40, 32),
-+ FUNC("pci-host1", 2, 40, 32),
-+ FUNC("pci-fnc", 3, 40, 32)
- };
-+static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
-
--static struct ralink_pinmux_grp pci_mux[] = {
-- {
-- .name = "pci-dev",
-- .mask = 0,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host2",
-- .mask = 1,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host1",
-- .mask = 2,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-fnc",
-- .mask = 3,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-gpio",
-- .mask = 7,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {0}
-+static struct rt2880_pmx_group rt3883_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
-+ RT3883_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO),
-+ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A),
-+ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G),
-+ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK,
-+ RT3883_GPIO_MODE_PCI_SHIFT),
-+ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1),
-+ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2),
-+ { 0 }
- };
-
- static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
- rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt3883_wdt_reset,
-- .pci = pci_mux,
-- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
-- .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
--};
--
- void __init ralink_clk_init(void)
- {
- unsigned long cpu_rate, sys_rate;
-@@ -243,4 +150,6 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT3883_SDRAM_BASE;
- soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
-+
-+ rt2880_pinmux_data = rt3883_pinmux_data;
- }
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -114,6 +114,11 @@ config PINCTRL_LANTIQ
- select PINMUX
- select PINCONF
-
-+config PINCTRL_RT2880
-+ bool
-+ depends on RALINK
-+ select PINMUX
-+
- config PINCTRL_FALCON
- bool
- depends on SOC_FALCON
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinc
- obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
- obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
- obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
-+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
-
- obj-$(CONFIG_PLAT_ORION) += mvebu/
- obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
---- /dev/null
-+++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,467 @@
-+/*
-+ * linux/drivers/pinctrl/pinctrl-rt2880.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/pinmux.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "core.h"
-+
-+#define SYSC_REG_GPIO_MODE 0x60
-+
-+struct rt2880_priv {
-+ struct device *dev;
-+
-+ struct pinctrl_pin_desc *pads;
-+ struct pinctrl_desc *desc;
-+
-+ struct rt2880_pmx_func **func;
-+ int func_count;
-+
-+ struct rt2880_pmx_group *groups;
-+ const char **group_names;
-+ int group_count;
-+
-+ uint8_t *gpio;
-+ int max_pins;
-+};
-+
-+struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
-+
-+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->group_count;
-+}
-+
-+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return NULL;
-+
-+ return p->group_names[group];
-+}
-+
-+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
-+ unsigned group,
-+ const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return -EINVAL;
-+
-+ *pins = p->groups[group].func[0].pins;
-+ *num_pins = p->groups[group].func[0].pin_count;
-+
-+ return 0;
-+}
-+
-+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_map *map, unsigned num_maps)
-+{
-+ int i;
-+
-+ for (i = 0; i < num_maps; i++)
-+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
-+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-+ kfree(map[i].data.configs.configs);
-+ kfree(map);
-+}
-+
-+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
-+ struct seq_file *s,
-+ unsigned offset)
-+{
-+ seq_printf(s, "ralink pio");
-+}
-+
-+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np,
-+ struct pinctrl_map **map)
-+{
-+ const char *function;
-+ int func = of_property_read_string(np, "ralink,function", &function);
-+ int grps = of_property_count_strings(np, "ralink,group");
-+ int i;
-+
-+ if (func || !grps)
-+ return;
-+
-+ for (i = 0; i < grps; i++) {
-+ const char *group;
-+
-+ of_property_read_string_index(np, "ralink,group", i, &group);
-+
-+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)->name = function;
-+ (*map)->data.mux.group = group;
-+ (*map)->data.mux.function = function;
-+ (*map)++;
-+ }
-+}
-+
-+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ int max_maps = 0;
-+ struct pinctrl_map *tmp;
-+ struct device_node *np;
-+
-+ for_each_child_of_node(np_config, np) {
-+ int ret = of_property_count_strings(np, "ralink,group");
-+
-+ if (ret >= 0)
-+ max_maps += ret;
-+ }
-+
-+ if (!max_maps)
-+ return max_maps;
-+
-+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!*map)
-+ return -ENOMEM;
-+
-+ tmp = *map;
-+
-+ for_each_child_of_node(np_config, np)
-+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
-+ *num_maps = max_maps;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops rt2880_pctrl_ops = {
-+ .get_groups_count = rt2880_get_group_count,
-+ .get_group_name = rt2880_get_group_name,
-+ .get_group_pins = rt2880_get_group_pins,
-+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
-+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
-+ .dt_free_map = rt2880_pinctrl_dt_free_map,
-+};
-+
-+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func_count;
-+}
-+
-+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
-+ unsigned func)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func[func]->name;
-+}
-+
-+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (p->func[func]->group_count == 1)
-+ *groups = &p->group_names[p->func[func]->groups[0]];
-+ else
-+ *groups = p->group_names;
-+
-+ *num_groups = p->func[func]->group_count;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+ u32 mode = 0;
-+ int i;
-+
-+ /* dont allow double use */
-+ if (p->groups[group].enabled) {
-+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
-+ return -EBUSY;
-+ }
-+
-+ p->groups[group].enabled = 1;
-+ p->func[func]->enabled = 1;
-+
-+ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE);
-+ mode &= ~(p->groups[group].mask << p->groups[group].shift);
-+
-+ /* mark the pins as gpio */
-+ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
-+ p->gpio[p->groups[group].func[0].pins[i]] = 1;
-+
-+ /* function 0 is gpio and needs special handling */
-+ if (func == 0) {
-+ mode |= p->groups[group].gpio << p->groups[group].shift;
-+ } else {
-+ for (i = 0; i < p->func[func]->pin_count; i++)
-+ p->gpio[p->func[func]->pins[i]] = 0;
-+ mode |= p->func[func]->value << p->groups[group].shift;
-+ }
-+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
-+
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned pin)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (!p->gpio[pin]) {
-+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops rt2880_pmx_group_ops = {
-+ .get_functions_count = rt2880_pmx_func_count,
-+ .get_function_name = rt2880_pmx_func_name,
-+ .get_function_groups = rt2880_pmx_group_get_groups,
-+ .enable = rt2880_pmx_group_enable,
-+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
-+};
-+
-+static struct pinctrl_desc rt2880_pctrl_desc = {
-+ .owner = THIS_MODULE,
-+ .name = "rt2880-pinmux",
-+ .pctlops = &rt2880_pctrl_ops,
-+ .pmxops = &rt2880_pmx_group_ops,
-+};
-+
-+static struct rt2880_pmx_func gpio_func = {
-+ .name = "gpio",
-+};
-+
-+static int rt2880_pinmux_index(struct rt2880_priv *p)
-+{
-+ struct rt2880_pmx_func **f;
-+ struct rt2880_pmx_group *mux = p->groups;
-+ int i, j, c = 0;
-+
-+ /* count the mux functions */
-+ while (mux->name) {
-+ p->group_count++;
-+ mux++;
-+ }
-+
-+ /* allocate the group names array needed by the gpio function */
-+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
-+ if (!p->group_names)
-+ return -1;
-+
-+ for (i = 0; i < p->group_count; i++) {
-+ p->group_names[i] = p->groups[i].name;
-+ p->func_count += p->groups[i].func_count;
-+ }
-+
-+ /* we have a dummy function[0] for gpio */
-+ p->func_count++;
-+
-+ /* allocate our function and group mapping index buffers */
-+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
-+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
-+ if (!f || !gpio_func.groups)
-+ return -1;
-+
-+ /* add a backpointer to the function so it knows its group */
-+ gpio_func.group_count = p->group_count;
-+ for (i = 0; i < gpio_func.group_count; i++)
-+ gpio_func.groups[i] = i;
-+
-+ f[c] = &gpio_func;
-+ c++;
-+
-+ /* add remaining functions */
-+ for (i = 0; i < p->group_count; i++) {
-+ for (j = 0; j < p->groups[i].func_count; j++) {
-+ f[c] = &p->groups[i].func[j];
-+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
-+ f[c]->groups[0] = i;
-+ f[c]->group_count = 1;
-+ c++;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_pins(struct rt2880_priv *p)
-+{
-+ int i, j;
-+
-+ /* loop over the functions and initialize the pins array. also work out the highest pin used */
-+ for (i = 0; i < p->func_count; i++) {
-+ int pin;
-+
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->func[i]->pins[j] = p->func[i]->pin_first + j;
-+
-+ pin = p->func[i]->pin_first + p->func[i]->pin_count;
-+ if (pin > p->max_pins)
-+ p->max_pins = pin;
-+ }
-+
-+ /* the buffer that tells us which pins are gpio */
-+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
-+ GFP_KERNEL);
-+ /* the pads needed to tell pinctrl about our pins */
-+ p->pads = devm_kzalloc(p->dev,
-+ sizeof(struct pinctrl_pin_desc) * p->max_pins,
-+ GFP_KERNEL);
-+ if (!p->pads || !p->gpio ) {
-+ dev_err(p->dev, "Failed to allocate gpio data\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
-+ for (i = 0; i < p->func_count; i++) {
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->gpio[p->func[i]->pins[j]] = 0;
-+ }
-+
-+ /* pin 0 is always a gpio */
-+ p->gpio[0] = 1;
-+
-+ /* set the pads */
-+ for (i = 0; i < p->max_pins; i++) {
-+ /* strlen("ioXY") + 1 = 5 */
-+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
-+
-+ if (!name) {
-+ dev_err(p->dev, "Failed to allocate pad name\n");
-+ return -ENOMEM;
-+ }
-+ snprintf(name, 5, "io%d", i);
-+ p->pads[i].number = i;
-+ p->pads[i].name = name;
-+ }
-+ p->desc->pins = p->pads;
-+ p->desc->npins = p->max_pins;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_probe(struct platform_device *pdev)
-+{
-+ struct rt2880_priv *p;
-+ struct pinctrl_dev *dev;
-+ struct device_node *np;
-+
-+ if (!rt2880_pinmux_data)
-+ return -ENOSYS;
-+
-+ /* setup the private data */
-+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ p->dev = &pdev->dev;
-+ p->desc = &rt2880_pctrl_desc;
-+ p->groups = rt2880_pinmux_data;
-+ platform_set_drvdata(pdev, p);
-+
-+ /* init the device */
-+ if (rt2880_pinmux_index(p)) {
-+ dev_err(&pdev->dev, "failed to load index\n");
-+ return -EINVAL;
-+ }
-+ if (rt2880_pinmux_pins(p)) {
-+ dev_err(&pdev->dev, "failed to load pins\n");
-+ return -EINVAL;
-+ }
-+ dev = pinctrl_register(p->desc, &pdev->dev, p);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ /* finalize by adding gpio ranges for enables gpio controllers */
-+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
-+ const __be32 *ngpio, *gpiobase;
-+ struct pinctrl_gpio_range *range;
-+ char *name;
-+
-+ if (!of_device_is_available(np))
-+ continue;
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (!ngpio || !gpiobase) {
-+ dev_err(&pdev->dev, "failed to load chip info\n");
-+ return -EINVAL;
-+ }
-+
-+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
-+ range->name = name = (char *) &range[1];
-+ sprintf(name, "pio");
-+ range->npins = __be32_to_cpu(*ngpio);
-+ range->base = __be32_to_cpu(*gpiobase);
-+ range->pin_base = range->base;
-+ pinctrl_add_gpio_range(dev, range);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt2880_pinmux_match[] = {
-+ { .compatible = "ralink,rt2880-pinmux" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
-+
-+static struct platform_driver rt2880_pinmux_driver = {
-+ .probe = rt2880_pinmux_probe,
-+ .driver = {
-+ .name = "rt2880-pinmux",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_pinmux_match,
-+ },
-+};
-+
-+int __init rt2880_pinmux_init(void)
-+{
-+ return platform_driver_register(&rt2880_pinmux_driver);
-+}
-+
-+core_initcall_sync(rt2880_pinmux_init);
diff --git a/target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch
deleted file mode 100644
index 521651f..0000000
--- a/target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From b7040c3ad7b8daf8309d083e9248cfa577075cfb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 21 Mar 2013 18:27:29 +0100
-Subject: [PATCH 114/133] PCI: MIPS: adds rt2880 pci support
-
-Add support for the pci found on the rt2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-rt2880.c | 281 ++++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 3 files changed, 283 insertions(+)
- create mode 100644 arch/mips/pci/pci-rt2880.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
---- /dev/null
-+++ b/arch/mips/pci/pci-rt2880.c
-@@ -0,0 +1,281 @@
-+/*
-+ * Ralink RT288x SoC PCI register definitions
-+ *
-+ * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+#include <asm/mach-ralink/rt288x.h>
-+
-+#define RT2880_PCI_BASE 0x00440000
-+#define RT288X_CPU_IRQ_PCI 4
-+
-+#define RT2880_PCI_MEM_BASE 0x20000000
-+#define RT2880_PCI_MEM_SIZE 0x10000000
-+#define RT2880_PCI_IO_BASE 0x00460000
-+#define RT2880_PCI_IO_SIZE 0x00010000
-+
-+#define RT2880_PCI_REG_PCICFG_ADDR 0x00
-+#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
-+#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
-+#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
-+#define RT2880_PCI_REG_CONFIG_ADDR 0x20
-+#define RT2880_PCI_REG_CONFIG_DATA 0x24
-+#define RT2880_PCI_REG_MEMBASE 0x28
-+#define RT2880_PCI_REG_IOBASE 0x2c
-+#define RT2880_PCI_REG_ID 0x30
-+#define RT2880_PCI_REG_CLASS 0x34
-+#define RT2880_PCI_REG_SUBID 0x38
-+#define RT2880_PCI_REG_ARBCTL 0x80
-+
-+static void __iomem *rt2880_pci_base;
-+static DEFINE_SPINLOCK(rt2880_pci_lock);
-+
-+static u32 rt2880_pci_reg_read(u32 reg)
-+{
-+ return readl(rt2880_pci_base + reg);
-+}
-+
-+static void rt2880_pci_reg_write(u32 val, u32 reg)
-+{
-+ writel(val, rt2880_pci_base + reg);
-+}
-+
-+static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
-+ unsigned int func, unsigned int where)
-+{
-+ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
-+ 0x80000000);
-+}
-+
-+static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ switch (size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+
-+ switch (size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ break;
-+ }
-+
-+ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops rt2880_pci_ops = {
-+ .read = rt2880_pci_config_read,
-+ .write = rt2880_pci_config_write,
-+};
-+
-+static struct resource rt2880_pci_mem_resource = {
-+ .name = "PCI MEM space",
-+ .start = RT2880_PCI_MEM_BASE,
-+ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource rt2880_pci_io_resource = {
-+ .name = "PCI IO space",
-+ .start = RT2880_PCI_IO_BASE,
-+ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller rt2880_pci_controller = {
-+ .pci_ops = &rt2880_pci_ops,
-+ .mem_resource = &rt2880_pci_mem_resource,
-+ .io_resource = &rt2880_pci_io_resource,
-+};
-+
-+static inline u32 rt2880_pci_read_u32(unsigned long reg)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 ret;
-+
-+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ return ret;
-+}
-+
-+static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+
-+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ int irq = -1;
-+
-+ if (dev->bus->number != 0)
-+ return irq;
-+
-+ switch (PCI_SLOT(dev->devfn)) {
-+ case 0x00:
-+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
-+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-+ break;
-+ case 0x11:
-+ irq = RT288X_CPU_IRQ_PCI;
-+ break;
-+ default:
-+ printk("%s:%s[%d] trying to alloc unknown pci irq\n",
-+ __FILE__, __func__, __LINE__);
-+ BUG();
-+ break;
-+ }
-+
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
-+ pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
-+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
-+ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
-+ pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
-+ dev->irq);
-+ return irq;
-+}
-+
-+static int rt288x_pci_probe(struct platform_device *pdev)
-+{
-+ void __iomem *io_map_base;
-+ int i;
-+
-+ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
-+
-+ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
-+ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
-+ set_io_port_base((unsigned long) io_map_base);
-+
-+ ioport_resource.start = RT2880_PCI_IO_BASE;
-+ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
-+
-+ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
-+ for(i = 0; i < 0xfffff; i++) {}
-+
-+ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
-+ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
-+ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
-+ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
-+ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
-+ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
-+ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
-+ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
-+ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
-+
-+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
-+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-+
-+ register_pci_controller(&rt2880_pci_controller);
-+ return 0;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id rt288x_pci_match[] = {
-+ { .compatible = "ralink,rt288x-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt288x_pci_match);
-+
-+static struct platform_driver rt288x_pci_driver = {
-+ .probe = rt288x_pci_probe,
-+ .driver = {
-+ .name = "rt288x-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt288x_pci_match,
-+ },
-+};
-+
-+int __init pcibios_init(void)
-+{
-+ int ret = platform_driver_register(&rt288x_pci_driver);
-+ if (ret)
-+ pr_info("rt288x-pci: Error registering platform driver!");
-+ return ret;
-+}
-+
-+arch_initcall(pcibios_init);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -15,6 +15,7 @@ choice
-
- config SOC_RT288X
- bool "RT288x"
-+ select HW_HAS_PCI
-
- config SOC_RT305X
- bool "RT305x"
diff --git a/target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch
deleted file mode 100644
index cff4017..0000000
--- a/target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch
+++ /dev/null
@@ -1,399 +0,0 @@
-From 686f5642c74323f7e7eafb93c2b85df589cbf66e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 18 May 2013 22:06:15 +0200
-Subject: [PATCH 115/133] PCI: MIPS: adds mt7620a pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 3 files changed, 365 insertions(+)
- create mode 100644 arch/mips/pci/pci-mt7620a.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
- obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
---- /dev/null
-+++ b/arch/mips/pci/pci-mt7620a.c
-@@ -0,0 +1,363 @@
-+/*
-+ * Ralink MT7620A SoC PCI support
-+ *
-+ * Copyright (C) 2007-2013 Bruce Chang
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+#include <linux/reset.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define RALINK_PCI_MM_MAP_BASE 0x20000000
-+#define RALINK_PCI_IO_MAP_BASE 0x10160000
-+
-+#define RALINK_INT_PCIE0 4
-+#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000
-+#define RALINK_SYSCFG1 0x14
-+#define RALINK_CLKCFG1 0x30
-+#define RALINK_GPIOMODE 0x60
-+#define RALINK_PCIE_CLK_GEN 0x7c
-+#define RALINK_PCIE_CLK_GEN1 0x80
-+#define PCIEPHY0_CFG 0x90
-+#define PPLL_CFG1 0x9c
-+#define PPLL_DRV 0xa0
-+#define RALINK_PCI_HOST_MODE_EN (1<<7)
-+#define RALINK_PCIE_RC_MODE_EN (1<<8)
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+#define RALINK_PCI_CLK_EN (1<<19)
-+#define RALINK_PCIE_CLK_EN (1<<21)
-+#define PCI_SLOTx2 (1<<11)
-+#define PCI_SLOTx1 (2<<11)
-+#define PDRV_SW_SET (1<<31)
-+#define LC_CKDRVPD_ (1<<19)
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+#define MEMORY_BASE 0x0
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_PCI_MEMBASE 0x28
-+#define RALINK_PCI_IOBASE 0x2C
-+
-+#define RT6855_PCIE0_OFFSET 0x2000
-+
-+#define RALINK_PCI_PCICFG_ADDR 0x00
-+#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
-+#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
-+#define RALINK_PCI0_ID 0x30
-+#define RALINK_PCI0_CLASS 0x34
-+#define RALINK_PCI0_SUBID 0x38
-+#define RALINK_PCI0_STATUS 0x50
-+#define RALINK_PCI_PCIMSK_ADDR 0x0C
-+
-+#define RALINK_PCIE0_CLK_EN (1 << 26)
-+
-+#define BUSY 0x80000000
-+#define WAITRETRY_MAX 10
-+#define WRITE_MODE (1UL << 23)
-+#define DATA_SHIFT 0
-+#define ADDR_SHIFT 8
-+
-+
-+static void __iomem *bridge_base;
-+static void __iomem *pcie_base;
-+
-+static struct reset_control *rstpcie0;
-+
-+static inline void bridge_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, bridge_base + reg);
-+}
-+
-+static inline u32 bridge_r32(unsigned reg)
-+{
-+ return ioread32(bridge_base + reg);
-+}
-+
-+static inline void pcie_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, pcie_base + reg);
-+}
-+
-+static inline u32 pcie_r32(unsigned reg)
-+{
-+ return ioread32(pcie_base + reg);
-+}
-+
-+static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
-+{
-+ u32 val = pcie_r32(reg);
-+ val &= ~clr;
-+ val |= set;
-+ pcie_w32(val, reg);
-+}
-+
-+int wait_pciephy_busy(void)
-+{
-+ unsigned long reg_value = 0x0, retry = 0;
-+
-+ while (1) {
-+ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0);
-+ reg_value = pcie_r32(PCIEPHY0_CFG);
-+
-+ if (reg_value & BUSY)
-+ mdelay(100);
-+ else
-+ break;
-+ if (retry++ > WAITRETRY_MAX){
-+ printk("PCIE-PHY retry failed.\n");
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static void pcie_phy(unsigned long addr, unsigned long val)
-+{
-+ wait_pciephy_busy();
-+ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
-+ mdelay(1);
-+ wait_pciephy_busy();
-+}
-+
-+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ u32 address;
-+ u32 data;
-+
-+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
-+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
-+
-+ switch (size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ u32 address;
-+ u32 data;
-+
-+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
-+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
-+
-+ switch (size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ break;
-+ }
-+
-+ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+struct pci_ops mt7620a_pci_ops= {
-+ .read = pci_config_read,
-+ .write = pci_config_write,
-+};
-+
-+static struct resource mt7620a_res_pci_mem1 = {
-+ .name = "pci memory",
-+ .start = RALINK_PCI_MM_MAP_BASE,
-+ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource mt7620a_res_pci_io1 = {
-+ .name = "pci io",
-+ .start = RALINK_PCI_IO_MAP_BASE,
-+ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller mt7620a_controller = {
-+ .pci_ops = &mt7620a_pci_ops,
-+ .mem_resource = &mt7620a_res_pci_mem1,
-+ .io_resource = &mt7620a_res_pci_io1,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+ .io_map_base = 0xa0000000,
-+};
-+
-+static int mt7620a_pci_probe(struct platform_device *pdev)
-+{
-+ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+
-+ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
-+ if (IS_ERR(rstpcie0))
-+ return PTR_ERR(rstpcie0);
-+
-+ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res);
-+ if (!bridge_base)
-+ return -ENOMEM;
-+
-+ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res);
-+ if (!pcie_base)
-+ return -ENOMEM;
-+
-+ iomem_resource.start = 0;
-+ iomem_resource.end= ~0;
-+ ioport_resource.start= 0;
-+ ioport_resource.end = ~0;
-+
-+ /* PCIE: bypass PCIe DLL */
-+ pcie_phy(0x0, 0x80);
-+ pcie_phy(0x1, 0x04);
-+ /* PCIE: Elastic buffer control */
-+ pcie_phy(0x68, 0xB4);
-+
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-+ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV);
-+ rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE);
-+
-+ reset_control_deassert(rstpcie0);
-+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
-+
-+ mdelay(100);
-+
-+ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) {
-+ printk("MT7620 PPLL unlock\n");
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1);
-+ return 0;
-+ }
-+ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV);
-+
-+ mdelay(100);
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1);
-+
-+ rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN);
-+ rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1);
-+
-+ mdelay(50);
-+ reset_control_deassert(rstpcie0);
-+ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
-+ mdelay(100);
-+
-+ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-+ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
-+ printk("PCIE0 no card, disable it(RST&CLK)\n");
-+ }
-+
-+ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
-+ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
-+
-+ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR);
-+ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
-+ pcie_w32(0x08021814, RALINK_PCI0_ID);
-+ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
-+ pcie_w32(0x28801814, RALINK_PCI0_SUBID);
-+ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
-+
-+ register_pci_controller(&mt7620a_controller);
-+
-+ return 0;
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ const struct resource *res;
-+ u16 cmd;
-+ u32 val;
-+ int i, irq = 0;
-+
-+ if ((dev->bus->number == 0) && (slot == 0)) {
-+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
-+ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
-+ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
-+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
-+ irq = RALINK_INT_PCIE0;
-+ } else {
-+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
-+ return 0;
-+ }
-+
-+ for (i = 0; i < 6; i++) {
-+ res = &dev->resource[i];
-+ }
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+ // FIXME
-+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
-+
-+ return irq;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620a_pci_ids[] = {
-+ { .compatible = "ralink,mt7620a-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7620a_pci_ids);
-+
-+static struct platform_driver mt7620a_pci_driver = {
-+ .probe = mt7620a_pci_probe,
-+ .driver = {
-+ .name = "mt7620a-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(mt7620a_pci_ids),
-+ },
-+};
-+
-+static int __init mt7620a_pci_init(void)
-+{
-+ return platform_driver_register(&mt7620a_pci_driver);
-+}
-+
-+arch_initcall(mt7620a_pci_init);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -33,6 +33,7 @@ choice
- bool "MT7620"
- select USB_ARCH_HAS_OHCI
- select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-
- endchoice
-
diff --git a/target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch
deleted file mode 100644
index 218d082..0000000
--- a/target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From bed88d4cb806d2738528cb7d368d6df79d9c1424 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 11 May 2013 23:40:19 +0200
-Subject: [PATCH 116/133] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 2 +-
- 2 files changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -820,7 +820,8 @@ void phy_state_machine(struct work_struc
- * negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- break;
- }
-@@ -890,7 +891,8 @@ void phy_state_machine(struct work_struc
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-@@ -902,7 +904,8 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- }
- break;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -298,7 +298,7 @@ struct phy_device {
-
- struct phy_c45_device_ids c45_ids;
- bool is_c45;
--
-+ bool no_auto_carrier_off;
- enum phy_state state;
-
- u32 dev_flags;
diff --git a/target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch
deleted file mode 100644
index a48bd4b..0000000
--- a/target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 1282a0da09e059288eb8b576998ea001680f6628 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:26:15 +0200
-Subject: [PATCH 117/133] NET: add of_get_mac_address_mtd()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h | 1 +
- 2 files changed, 38 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -10,6 +10,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
-
- /**
- * It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
- return NULL;
- }
- EXPORT_SYMBOL(of_get_mac_address);
-+
-+int of_get_mac_address_mtd(struct device_node *np, void *mac)
-+{
-+ struct device_node *mtd_np = NULL;
-+ size_t retlen;
-+ int size, ret;
-+ struct mtd_info *mtd;
-+ const char *part;
-+ const __be32 *list;
-+ phandle phandle;
-+
-+ list = of_get_property(np, "mtd-mac-address", &size);
-+ if (!list || (size != (2 * sizeof(*list))))
-+ return -ENOENT;
-+
-+ phandle = be32_to_cpup(list++);
-+ if (phandle)
-+ mtd_np = of_find_node_by_phandle(phandle);
-+
-+ if (!mtd_np)
-+ return -ENOENT;
-+
-+ part = of_get_property(mtd_np, "label", NULL);
-+ if (!part)
-+ part = mtd_np->name;
-+
-+ mtd = get_mtd_device_nm(part);
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac);
-+ put_mtd_device(mtd);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
---- a/include/linux/of_net.h
-+++ b/include/linux/of_net.h
-@@ -11,6 +11,7 @@
- #include <linux/of.h>
- extern const int of_get_phy_mode(struct device_node *np);
- extern const void *of_get_mac_address(struct device_node *np);
-+extern int of_get_mac_address_mtd(struct device_node *np, void *mac);
- #else
- static inline const int of_get_phy_mode(struct device_node *np)
- {
diff --git a/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
deleted file mode 100644
index 6eb624f..0000000
--- a/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ /dev/null
@@ -1,5063 +0,0 @@
-From b7d9374aee4b47a76dadaf1fe7f6838087c9c62d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Apr 2013 23:20:03 +0200
-Subject: [PATCH 118/133] NET: MIPS: add ralink SoC ethernet driver
-
-Add support for Ralink FE and ESW.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../include/asm/mach-ralink/rt305x_esw_platform.h | 27 +
- arch/mips/ralink/rt305x.c | 1 +
- drivers/net/ethernet/Kconfig | 1 +
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/ralink/Kconfig | 32 +
- drivers/net/ethernet/ralink/Makefile | 18 +
- drivers/net/ethernet/ralink/esw_rt3052.c | 1463 ++++++++++++++++++++
- drivers/net/ethernet/ralink/esw_rt3052.h | 32 +
- drivers/net/ethernet/ralink/gsw_mt7620a.c | 566 ++++++++
- drivers/net/ethernet/ralink/gsw_mt7620a.h | 30 +
- drivers/net/ethernet/ralink/mdio.c | 244 ++++
- drivers/net/ethernet/ralink/mdio.h | 29 +
- drivers/net/ethernet/ralink/mdio_rt2880.c | 232 ++++
- drivers/net/ethernet/ralink/mdio_rt2880.h | 26 +
- drivers/net/ethernet/ralink/mt7530.c | 467 +++++++
- drivers/net/ethernet/ralink/mt7530.h | 20 +
- drivers/net/ethernet/ralink/ralink_soc_eth.c | 845 +++++++++++
- drivers/net/ethernet/ralink/ralink_soc_eth.h | 384 +++++
- drivers/net/ethernet/ralink/soc_mt7620.c | 172 +++
- drivers/net/ethernet/ralink/soc_rt2880.c | 51 +
- drivers/net/ethernet/ralink/soc_rt305x.c | 113 ++
- drivers/net/ethernet/ralink/soc_rt3883.c | 60 +
- 22 files changed, 4814 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
- create mode 100644 drivers/net/ethernet/ralink/Kconfig
- create mode 100644 drivers/net/ethernet/ralink/Makefile
- create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.c
- create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.h
- create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.c
- create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.h
- create mode 100644 drivers/net/ethernet/ralink/mdio.c
- create mode 100644 drivers/net/ethernet/ralink/mdio.h
- create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c
- create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h
- create mode 100644 drivers/net/ethernet/ralink/mt7530.c
- create mode 100644 drivers/net/ethernet/ralink/mt7530.h
- create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c
- create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h
- create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c
- create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c
- create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
- create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-@@ -0,0 +1,27 @@
-+/*
-+ * Ralink RT305x SoC platform device registration
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef _RT305X_ESW_PLATFORM_H
-+#define _RT305X_ESW_PLATFORM_H
-+
-+enum {
-+ RT305X_ESW_VLAN_CONFIG_NONE = 0,
-+ RT305X_ESW_VLAN_CONFIG_LLLLW,
-+ RT305X_ESW_VLAN_CONFIG_WLLLL,
-+};
-+
-+struct rt305x_esw_platform_data
-+{
-+ u8 vlan_config;
-+ u32 reg_initval_fct2;
-+ u32 reg_initval_fpa2;
-+};
-+
-+#endif /* _RT305X_ESW_PLATFORM_H */
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -194,6 +194,7 @@ void __init ralink_clk_init(void)
- }
-
- ralink_clk_add("cpu", cpu_rate);
-+ ralink_clk_add("sys", sys_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000100.timer", wdt_rate);
- ralink_clk_add("10000120.watchdog", wdt_rate);
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -135,6 +135,7 @@ config ETHOC
- source "drivers/net/ethernet/packetengines/Kconfig"
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
-+source "drivers/net/ethernet/ralink/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -53,6 +53,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
- obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
-+obj-$(CONFIG_NET_RALINK) += ralink/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/Kconfig
-@@ -0,0 +1,32 @@
-+config NET_RALINK
-+ tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver"
-+ depends on RALINK
-+ help
-+ This driver supports the ethernet mac inside the ralink wisocs
-+
-+if NET_RALINK
-+
-+config NET_RALINK_MDIO
-+ def_bool NET_RALINK
-+ depends on (SOC_RT288X || SOC_RT3883 || SOC_MT7620)
-+ select PHYLIB
-+
-+config NET_RALINK_MDIO_RT2880
-+ def_bool NET_RALINK
-+ depends on (SOC_RT288X || SOC_RT3883)
-+ select NET_RALINK_MDIO
-+
-+config NET_RALINK_ESW_RT3052
-+ def_bool NET_RALINK
-+ depends on SOC_RT305X
-+ select PHYLIB
-+ select SWCONFIG
-+
-+config NET_RALINK_GSW_MT7620
-+ def_bool NET_RALINK
-+ depends on SOC_MT7620
-+ select INET_LRO
-+ select NET_RALINK_MDIO
-+ select PHYLIB
-+ select SWCONFIG
-+endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/Makefile
-@@ -0,0 +1,18 @@
-+#
-+# Makefile for the Ralink SoCs built-in ethernet macs
-+#
-+
-+ralink-eth-y += ralink_soc_eth.o
-+
-+ralink-eth-$(CONFIG_NET_RALINK_MDIO) += mdio.o
-+ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880) += mdio_rt2880.o
-+
-+ralink-eth-$(CONFIG_NET_RALINK_ESW_RT3052) += esw_rt3052.o
-+ralink-eth-$(CONFIG_NET_RALINK_GSW_MT7620) += gsw_mt7620a.o mt7530.o
-+
-+ralink-eth-$(CONFIG_SOC_RT288X) += soc_rt2880.o
-+ralink-eth-$(CONFIG_SOC_RT305X) += soc_rt305x.o
-+ralink-eth-$(CONFIG_SOC_RT3883) += soc_rt3883.o
-+ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o
-+
-+obj-$(CONFIG_NET_RALINK) += ralink-eth.o
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/esw_rt3052.c
-@@ -0,0 +1,1463 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+
-+#include <linux/ioport.h>
-+#include <linux/switch.h>
-+#include <linux/mii.h>
-+
-+#include <ralink_regs.h>
-+#include <asm/mach-ralink/rt305x.h>
-+#include <asm/mach-ralink/rt305x_esw_platform.h>
-+
-+/*
-+ * HW limitations for this switch:
-+ * - No large frame support (PKT_MAX_LEN at most 1536)
-+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
-+ * though this might be possible using the undocumented PPE.
-+ */
-+
-+#define RT305X_ESW_REG_ISR 0x00
-+#define RT305X_ESW_REG_IMR 0x04
-+#define RT305X_ESW_REG_FCT0 0x08
-+#define RT305X_ESW_REG_PFC1 0x14
-+#define RT305X_ESW_REG_ATS 0x24
-+#define RT305X_ESW_REG_ATS0 0x28
-+#define RT305X_ESW_REG_ATS1 0x2c
-+#define RT305X_ESW_REG_ATS2 0x30
-+#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
-+#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
-+#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
-+#define RT305X_ESW_REG_POA 0x80
-+#define RT305X_ESW_REG_FPA 0x84
-+#define RT305X_ESW_REG_SOCPC 0x8c
-+#define RT305X_ESW_REG_POC0 0x90
-+#define RT305X_ESW_REG_POC1 0x94
-+#define RT305X_ESW_REG_POC2 0x98
-+#define RT305X_ESW_REG_SGC 0x9c
-+#define RT305X_ESW_REG_STRT 0xa0
-+#define RT305X_ESW_REG_PCR0 0xc0
-+#define RT305X_ESW_REG_PCR1 0xc4
-+#define RT305X_ESW_REG_FPA2 0xc8
-+#define RT305X_ESW_REG_FCT2 0xcc
-+#define RT305X_ESW_REG_SGC2 0xe4
-+#define RT305X_ESW_REG_P0LED 0xa4
-+#define RT305X_ESW_REG_P1LED 0xa8
-+#define RT305X_ESW_REG_P2LED 0xac
-+#define RT305X_ESW_REG_P3LED 0xb0
-+#define RT305X_ESW_REG_P4LED 0xb4
-+#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
-+#define RT305X_ESW_REG_P1PC 0xec
-+#define RT305X_ESW_REG_P2PC 0xf0
-+#define RT305X_ESW_REG_P3PC 0xf4
-+#define RT305X_ESW_REG_P4PC 0xf8
-+#define RT305X_ESW_REG_P5PC 0xfc
-+
-+#define RT305X_ESW_LED_LINK 0
-+#define RT305X_ESW_LED_100M 1
-+#define RT305X_ESW_LED_DUPLEX 2
-+#define RT305X_ESW_LED_ACTIVITY 3
-+#define RT305X_ESW_LED_COLLISION 4
-+#define RT305X_ESW_LED_LINKACT 5
-+#define RT305X_ESW_LED_DUPLCOLL 6
-+#define RT305X_ESW_LED_10MACT 7
-+#define RT305X_ESW_LED_100MACT 8
-+/* Additional led states not in datasheet: */
-+#define RT305X_ESW_LED_BLINK 10
-+#define RT305X_ESW_LED_ON 12
-+
-+#define RT305X_ESW_LINK_S 25
-+#define RT305X_ESW_DUPLEX_S 9
-+#define RT305X_ESW_SPD_S 0
-+
-+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
-+#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
-+#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
-+
-+#define RT305X_ESW_PCR1_WT_DONE BIT(0)
-+
-+#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
-+#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
-+
-+#define RT305X_ESW_PVIDC_PVID_M 0xfff
-+#define RT305X_ESW_PVIDC_PVID_S 12
-+
-+#define RT305X_ESW_VLANI_VID_M 0xfff
-+#define RT305X_ESW_VLANI_VID_S 12
-+
-+#define RT305X_ESW_VMSC_MSC_M 0xff
-+#define RT305X_ESW_VMSC_MSC_S 8
-+
-+#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
-+#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
-+#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
-+#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
-+
-+#define RT305X_ESW_POC0_EN_BP_S 0
-+#define RT305X_ESW_POC0_EN_FC_S 8
-+#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
-+#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
-+#define RT305X_ESW_POC0_DIS_PORT_S 23
-+
-+#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
-+#define RT305X_ESW_POC2_UNTAG_EN_S 0
-+#define RT305X_ESW_POC2_ENAGING_S 8
-+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
-+
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
-+#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
-+#define RT305X_ESW_SGC2_LAN_PMAP_S 24
-+
-+#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
-+#define RT305X_ESW_PFC1_EN_VLAN_S 16
-+#define RT305X_ESW_PFC1_EN_TOS_S 24
-+
-+#define RT305X_ESW_VLAN_NONE 0xfff
-+
-+#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
-+#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
-+
-+#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
-+#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
-+
-+#define RT305X_ESW_POA_LINK_MASK 0x1f
-+#define RT305X_ESW_POA_LINK_SHIFT 25
-+
-+#define RT305X_ESW_PORT_ST_CHG BIT(26)
-+#define RT305X_ESW_PORT0 0
-+#define RT305X_ESW_PORT1 1
-+#define RT305X_ESW_PORT2 2
-+#define RT305X_ESW_PORT3 3
-+#define RT305X_ESW_PORT4 4
-+#define RT305X_ESW_PORT5 5
-+#define RT305X_ESW_PORT6 6
-+
-+#define RT305X_ESW_PORTS_NONE 0
-+
-+#define RT305X_ESW_PMAP_LLLLLL 0x3f
-+#define RT305X_ESW_PMAP_LLLLWL 0x2f
-+#define RT305X_ESW_PMAP_WLLLLL 0x3e
-+
-+#define RT305X_ESW_PORTS_INTERNAL \
-+ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
-+ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
-+ BIT(RT305X_ESW_PORT4))
-+
-+#define RT305X_ESW_PORTS_NOCPU \
-+ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
-+
-+#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
-+
-+#define RT305X_ESW_PORTS_ALL \
-+ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
-+
-+#define RT305X_ESW_NUM_VLANS 16
-+#define RT305X_ESW_NUM_VIDS 4096
-+#define RT305X_ESW_NUM_PORTS 7
-+#define RT305X_ESW_NUM_LANWAN 6
-+#define RT305X_ESW_NUM_LEDS 5
-+
-+#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x))
-+#define RT5350_EWS_REG_LED_POLARITY 0x168
-+#define RT5350_RESET_EPHY BIT(24)
-+#define SYSC_REG_RESET_CTRL 0x34
-+
-+enum {
-+ /* Global attributes. */
-+ RT305X_ESW_ATTR_ENABLE_VLAN,
-+ RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+ RT305X_ESW_ATTR_BC_STATUS,
-+ RT305X_ESW_ATTR_LED_FREQ,
-+ /* Port attributes. */
-+ RT305X_ESW_ATTR_PORT_DISABLE,
-+ RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+ RT305X_ESW_ATTR_PORT_UNTAG,
-+ RT305X_ESW_ATTR_PORT_LED,
-+ RT305X_ESW_ATTR_PORT_LAN,
-+ RT305X_ESW_ATTR_PORT_RECV_BAD,
-+ RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+ RT5350_ESW_ATTR_PORT_TR_BAD,
-+ RT5350_ESW_ATTR_PORT_TR_GOOD,
-+};
-+
-+struct esw_port {
-+ bool disable;
-+ bool doubletag;
-+ bool untag;
-+ u8 led;
-+ u16 pvid;
-+};
-+
-+struct esw_vlan {
-+ u8 ports;
-+ u16 vid;
-+};
-+
-+struct rt305x_esw {
-+ struct device *dev;
-+ void __iomem *base;
-+ int irq;
-+ const struct rt305x_esw_platform_data *pdata;
-+ /* Protects against concurrent register rmw operations. */
-+ spinlock_t reg_rw_lock;
-+
-+ unsigned char port_map;
-+ unsigned int reg_initval_fct2;
-+ unsigned int reg_initval_fpa2;
-+ unsigned int reg_led_polarity;
-+
-+
-+ struct switch_dev swdev;
-+ bool global_vlan_enable;
-+ bool alt_vlan_disable;
-+ int bc_storm_protect;
-+ int led_frequency;
-+ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
-+ struct esw_port ports[RT305X_ESW_NUM_PORTS];
-+
-+};
-+
-+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
-+{
-+ __raw_writel(val, esw->base + reg);
-+}
-+
-+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
-+{
-+ return __raw_readl(esw->base + reg);
-+}
-+
-+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
-+ unsigned long val)
-+{
-+ unsigned long t;
-+
-+ t = __raw_readl(esw->base + reg) & ~mask;
-+ __raw_writel(t | val, esw->base + reg);
-+}
-+
-+static void esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask,
-+ unsigned long val)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&esw->reg_rw_lock, flags);
-+ esw_rmw_raw(esw, reg, mask, val);
-+ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
-+}
-+
-+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register,
-+ u32 write_data)
-+{
-+ unsigned long t_start = jiffies;
-+ int ret = 0;
-+
-+ while (1) {
-+ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
-+ RT305X_ESW_PCR1_WT_DONE))
-+ break;
-+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+ ret = 1;
-+ goto out;
-+ }
-+ }
-+
-+ write_data &= 0xffff;
-+ esw_w32(esw,
-+ (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
-+ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
-+ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
-+ RT305X_ESW_REG_PCR0);
-+
-+ t_start = jiffies;
-+ while (1) {
-+ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
-+ RT305X_ESW_PCR1_WT_DONE)
-+ break;
-+
-+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+ ret = 1;
-+ break;
-+ }
-+ }
-+out:
-+ if (ret)
-+ printk(KERN_ERR "ramips_eth: MDIO timeout\n");
-+ return ret;
-+}
-+
-+static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
-+{
-+ unsigned s;
-+ unsigned val;
-+
-+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
-+ val = (val >> s) & RT305X_ESW_VLANI_VID_M;
-+
-+ return val;
-+}
-+
-+static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_VLANI(vlan / 2),
-+ RT305X_ESW_VLANI_VID_M << s,
-+ (vid & RT305X_ESW_VLANI_VID_M) << s);
-+}
-+
-+static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
-+{
-+ unsigned s, val;
-+
-+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
-+ return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
-+}
-+
-+static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_PVIDC(port / 2),
-+ RT305X_ESW_PVIDC_PVID_M << s,
-+ (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
-+}
-+
-+static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
-+{
-+ unsigned s, val;
-+
-+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
-+ val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
-+
-+ return val;
-+}
-+
-+static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_VMSC(vlan / 4),
-+ RT305X_ESW_VMSC_MSC_M << s,
-+ (msc & RT305X_ESW_VMSC_MSC_M) << s);
-+}
-+
-+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
-+{
-+ unsigned reg;
-+ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
-+ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
-+ RT305X_ESW_POC0_DIS_PORT_M;
-+}
-+
-+static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
-+{
-+ unsigned old_mask;
-+ unsigned enable_mask;
-+ unsigned changed;
-+ int i;
-+
-+ old_mask = esw_get_port_disable(esw);
-+ changed = old_mask ^ disable_mask;
-+ enable_mask = old_mask & disable_mask;
-+
-+ /* enable before writing to MII */
-+ esw_rmw(esw, RT305X_ESW_REG_POC0,
-+ (RT305X_ESW_POC0_DIS_PORT_M <<
-+ RT305X_ESW_POC0_DIS_PORT_S),
-+ enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+
-+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
-+ if (!(changed & (1 << i)))
-+ continue;
-+ if (disable_mask & (1 << i)) {
-+ /* disable */
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_PDOWN);
-+ } else {
-+ /* enable */
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_ANRESTART |
-+ BMCR_SPEED100);
-+ }
-+ }
-+
-+ /* disable after writing to MII */
-+ esw_rmw(esw, RT305X_ESW_REG_POC0,
-+ (RT305X_ESW_POC0_DIS_PORT_M <<
-+ RT305X_ESW_POC0_DIS_PORT_S),
-+ disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+}
-+
-+static void esw_set_gsc(struct rt305x_esw *esw)
-+{
-+ esw_rmw(esw, RT305X_ESW_REG_SGC,
-+ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
-+ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
-+ esw_rmw(esw, RT305X_ESW_REG_SGC,
-+ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
-+ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
-+}
-+
-+static int esw_apply_config(struct switch_dev *dev);
-+
-+static void esw_hw_init(struct rt305x_esw *esw)
-+{
-+ int i;
-+ u8 port_disable = 0;
-+ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+ /* vodoo from original driver */
-+ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
-+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
-+ /* Port priority 1 for all ports, vlan enabled. */
-+ esw_w32(esw, 0x00005555 |
-+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
-+ RT305X_ESW_REG_PFC1);
-+
-+ /* Enable Back Pressure, and Flow Control */
-+ esw_w32(esw,
-+ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
-+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
-+ RT305X_ESW_REG_POC0);
-+
-+ /* Enable Aging, and VLAN TAG removal */
-+ esw_w32(esw,
-+ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
-+ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
-+ RT305X_ESW_REG_POC2);
-+
-+ if (esw->reg_initval_fct2)
-+ esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2);
-+ else
-+ esw_w32(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2);
-+
-+ /*
-+ * 300s aging timer, max packet len 1536, broadcast storm prevention
-+ * disabled, disable collision abort, mac xor48 hash, 10 packet back
-+ * pressure jam, GMII disable was_transmit, back pressure disabled,
-+ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
-+ * ports.
-+ */
-+ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
-+
-+ /* Setup SoC Port control register */
-+ esw_w32(esw,
-+ (RT305X_ESW_SOCPC_CRC_PADDING |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
-+ RT305X_ESW_REG_SOCPC);
-+
-+ if (esw->reg_initval_fpa2)
-+ esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
-+ else
-+ esw_w32(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2);
-+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
-+
-+ /* Force Link/Activity on ports */
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
-+
-+ /* Copy disabled port configuration from bootloader setup */
-+ port_disable = esw_get_port_disable(esw);
-+ for (i = 0; i < 6; i++)
-+ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
-+
-+ if (soc_is_rt3352()) {
-+ /* reset EPHY */
-+ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
-+
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient LSB=0 disable PHY */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7016);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0038);
-+ }
-+
-+ /* select global register */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* enlarge agcsel threshold 3 and threshold 2 */
-+ rt305x_mii_write(esw, 0, 1, 0x4a40);
-+ /* enlarge agcsel threshold 5 and threshold 4 */
-+ rt305x_mii_write(esw, 0, 2, 0x6254);
-+ /* enlarge agcsel threshold */
-+ rt305x_mii_write(esw, 0, 3, 0xa17f);
-+ rt305x_mii_write(esw, 0,12, 0x7eaa);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* increased squelch pulse count threshold. */
-+ rt305x_mii_write(esw, 0, 16, 0x0684);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* tune TP_IDL tail and head waveform, enable power down slew rate control */
-+ rt305x_mii_write(esw, 0, 22, 0x253f);
-+ /* set PLL/Receive bias current are calibrated */
-+ rt305x_mii_write(esw, 0, 27, 0x2fda);
-+ /* change PLL/Receive bias current to internal(RT3350) */
-+ rt305x_mii_write(esw, 0, 28, 0xc410);
-+ /* change PLL bias current to internal(RT3052_MP3) */
-+ rt305x_mii_write(esw, 0, 29, 0x598b);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ } else if (soc_is_rt5350()) {
-+ /* reset EPHY */
-+ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
-+
-+ /* set the led polarity */
-+ esw_w32(esw, esw->reg_led_polarity & 0x1F, RT5350_EWS_REG_LED_POLARITY);
-+
-+ /* local registers */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient LSB=0 disable PHY */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7015);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0038);
-+ }
-+
-+ /* global registers */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* enlarge agcsel threshold 3 and threshold 2 */
-+ rt305x_mii_write(esw, 0, 1, 0x4a40);
-+ /* enlarge agcsel threshold 5 and threshold 4 */
-+ rt305x_mii_write(esw, 0, 2, 0x6254);
-+ /* enlarge agcsel threshold 6 */
-+ rt305x_mii_write(esw, 0, 3, 0xa17f);
-+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* increased squelch pulse count threshold. */
-+ rt305x_mii_write(esw, 0, 16, 0x0684);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* tune TP_IDL tail and head waveform, enable power down slew rate control */
-+ rt305x_mii_write(esw, 0, 22, 0x253f);
-+ /* set PLL/Receive bias current are calibrated */
-+ rt305x_mii_write(esw, 0, 27, 0x2fda);
-+ /* change PLL/Receive bias current to internal(RT3350) */
-+ rt305x_mii_write(esw, 0, 28, 0xc410);
-+ /* change PLL bias current to internal(RT3052_MP3) */
-+ rt305x_mii_write(esw, 0, 29, 0x598b);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ } else {
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7058);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0018);
-+ }
-+
-+ /* PHY IOT */
-+ /* select global register */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* tune TP_IDL tail and head waveform */
-+ rt305x_mii_write(esw, 0, 22, 0x052f);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ }
-+
-+ if (esw->port_map)
-+ port_map = esw->port_map;
-+ else
-+ port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+ /*
-+ * Unused HW feature, but still nice to be consistent here...
-+ * This is also exported to userspace ('lan' attribute) so it's
-+ * conveniently usable to decide which ports go into the wan vlan by
-+ * default.
-+ */
-+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
-+ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
-+
-+ /* make the switch leds blink */
-+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
-+ esw->ports[i].led = 0x05;
-+
-+ /* Apply the empty config. */
-+ esw_apply_config(&esw->swdev);
-+
-+ /* Only unmask the port change interrupt */
-+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
-+}
-+
-+static irqreturn_t esw_interrupt(int irq, void *_esw)
-+{
-+ struct rt305x_esw *esw = (struct rt305x_esw *) _esw;
-+ u32 status;
-+
-+ status = esw_r32(esw, RT305X_ESW_REG_ISR);
-+ if (status & RT305X_ESW_PORT_ST_CHG) {
-+ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
-+ link >>= RT305X_ESW_POA_LINK_SHIFT;
-+ link &= RT305X_ESW_POA_LINK_MASK;
-+ dev_info(esw->dev, "link changed 0x%02X\n", link);
-+ }
-+ esw_w32(esw, status, RT305X_ESW_REG_ISR);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int esw_apply_config(struct switch_dev *dev)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int i;
-+ u8 disable = 0;
-+ u8 doubletag = 0;
-+ u8 en_vlan = 0;
-+ u8 untag = 0;
-+
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ u32 vid, vmsc;
-+ if (esw->global_vlan_enable) {
-+ vid = esw->vlans[i].vid;
-+ vmsc = esw->vlans[i].ports;
-+ } else {
-+ vid = RT305X_ESW_VLAN_NONE;
-+ vmsc = RT305X_ESW_PORTS_NONE;
-+ }
-+ esw_set_vlan_id(esw, i, vid);
-+ esw_set_vmsc(esw, i, vmsc);
-+ }
-+
-+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+ u32 pvid;
-+ disable |= esw->ports[i].disable << i;
-+ if (esw->global_vlan_enable) {
-+ doubletag |= esw->ports[i].doubletag << i;
-+ en_vlan |= 1 << i;
-+ untag |= esw->ports[i].untag << i;
-+ pvid = esw->ports[i].pvid;
-+ } else {
-+ int x = esw->alt_vlan_disable ? 0 : 1;
-+ doubletag |= x << i;
-+ en_vlan |= x << i;
-+ untag |= x << i;
-+ pvid = 0;
-+ }
-+ esw_set_pvid(esw, i, pvid);
-+ if (i < RT305X_ESW_NUM_LEDS)
-+ esw_w32(esw, esw->ports[i].led,
-+ RT305X_ESW_REG_P0LED + 4*i);
-+ }
-+
-+ esw_set_gsc(esw);
-+ esw_set_port_disable(esw, disable);
-+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+ (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
-+ RT305X_ESW_SGC2_DOUBLE_TAG_S),
-+ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
-+ esw_rmw(esw, RT305X_ESW_REG_PFC1,
-+ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
-+ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
-+ esw_rmw(esw, RT305X_ESW_REG_POC2,
-+ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
-+ untag << RT305X_ESW_POC2_UNTAG_EN_S);
-+
-+ if (!esw->global_vlan_enable) {
-+ /*
-+ * Still need to put all ports into vlan 0 or they'll be
-+ * isolated.
-+ * NOTE: vlan 0 is special, no vlan tag is prepended
-+ */
-+ esw_set_vlan_id(esw, 0, 0);
-+ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_reset_switch(struct switch_dev *dev)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->global_vlan_enable = 0;
-+ memset(esw->ports, 0, sizeof(esw->ports));
-+ memset(esw->vlans, 0, sizeof(esw->vlans));
-+ esw_hw_init(esw);
-+
-+ return 0;
-+}
-+
-+static int esw_get_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->global_vlan_enable;
-+
-+ return 0;
-+}
-+
-+static int esw_set_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->global_vlan_enable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static int esw_get_alt_vlan_disable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->alt_vlan_disable;
-+
-+ return 0;
-+}
-+
-+static int esw_set_alt_vlan_disable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->alt_vlan_disable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_set_bc_status(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_get_bc_status(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->bc_storm_protect;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_set_led_freq(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_get_led_freq(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->led_frequency;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ u32 speed, poa;
-+
-+ if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
-+
-+ link->link = (poa >> RT305X_ESW_LINK_S) & 1;
-+ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
-+ if (port < RT305X_ESW_NUM_LEDS) {
-+ speed = (poa >> RT305X_ESW_SPD_S) & 1;
-+ } else {
-+ if (port == RT305X_ESW_NUM_PORTS - 1)
-+ poa >>= 1;
-+ speed = (poa >> RT305X_ESW_SPD_S) & 3;
-+ }
-+ switch (speed) {
-+ case 0:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case 1:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case 2:
-+ case 3: /* forced gige speed can be 2 or 3 */
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_bool(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+ u32 x, reg, shift;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ switch (attr->id) {
-+ case RT305X_ESW_ATTR_PORT_DISABLE:
-+ reg = RT305X_ESW_REG_POC0;
-+ shift = RT305X_ESW_POC0_DIS_PORT_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+ reg = RT305X_ESW_REG_SGC2;
-+ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_UNTAG:
-+ reg = RT305X_ESW_REG_POC2;
-+ shift = RT305X_ESW_POC2_UNTAG_EN_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_LAN:
-+ reg = RT305X_ESW_REG_SGC2;
-+ shift = RT305X_ESW_SGC2_LAN_PMAP_S;
-+ if (idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ x = esw_r32(esw, reg);
-+ val->value.i = (x >> (idx + shift)) & 1;
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_bool(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+ val->value.i < 0 || val->value.i > 1)
-+ return -EINVAL;
-+
-+ switch (attr->id) {
-+ case RT305X_ESW_ATTR_PORT_DISABLE:
-+ esw->ports[idx].disable = val->value.i;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+ esw->ports[idx].doubletag = val->value.i;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_UNTAG:
-+ esw->ports[idx].untag = val->value.i;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_recv_badgood(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
-+ u32 reg;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
-+ val->value.i = (reg >> shift) & 0xffff;
-+
-+ return 0;
-+}
-+
-+static int
-+esw_get_port_tr_badgood(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ int idx = val->port_vlan;
-+ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
-+ u32 reg;
-+
-+ if (!soc_is_rt5350())
-+ return -EINVAL;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+
-+ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
-+ val->value.i = (reg >> shift) & 0xffff;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_led(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+ idx >= RT305X_ESW_NUM_LEDS)
-+ return -EINVAL;
-+
-+ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_led(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
-+ return -EINVAL;
-+
-+ esw->ports[idx].led = val->value.i;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ if (port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ *val = esw_get_pvid(esw, port);
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ if (port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ esw->ports[port].pvid = val;
-+
-+ return 0;
-+}
-+
-+static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ u32 vmsc, poc2;
-+ int vlan_idx = -1;
-+ int i;
-+
-+ val->len = 0;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
-+ return -EINVAL;
-+
-+ /* valid vlan? */
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw_get_vlan_id(esw, i) == val->port_vlan &&
-+ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
-+ vlan_idx = i;
-+ break;
-+ }
-+ }
-+
-+ if (vlan_idx == -1)
-+ return -EINVAL;
-+
-+ vmsc = esw_get_vmsc(esw, vlan_idx);
-+ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
-+
-+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+ struct switch_port *p;
-+ int port_mask = 1 << i;
-+
-+ if (!(vmsc & port_mask))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
-+ p->flags = 0;
-+ else
-+ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int ports;
-+ int vlan_idx = -1;
-+ int i;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
-+ val->len > RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ /* one of the already defined vlans? */
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw->vlans[i].vid == val->port_vlan &&
-+ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
-+ vlan_idx = i;
-+ break;
-+ }
-+ }
-+
-+ /* select a free slot */
-+ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
-+ vlan_idx = i;
-+ }
-+
-+ /* bail if all slots are in use */
-+ if (vlan_idx == -1)
-+ return -EINVAL;
-+
-+ ports = RT305X_ESW_PORTS_NONE;
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+ int port_mask = 1 << p->id;
-+ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
-+
-+ if (p->id >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ ports |= port_mask;
-+ esw->ports[p->id].untag = untagged;
-+ }
-+ esw->vlans[vlan_idx].ports = ports;
-+ if (ports == RT305X_ESW_PORTS_NONE)
-+ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
-+ else
-+ esw->vlans[vlan_idx].vid = val->port_vlan;
-+
-+ return 0;
-+}
-+
-+static const struct switch_attr esw_global[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "VLAN mode (1:enabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_ENABLE_VLAN,
-+ .get = esw_get_vlan_enable,
-+ .set = esw_set_vlan_enable,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "alternate_vlan_disable",
-+ .description = "Use en_vlan instead of doubletag to disable"
-+ " VLAN mode",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+ .get = esw_get_alt_vlan_disable,
-+ .set = esw_set_alt_vlan_disable,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "bc_storm_protect",
-+ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
-+ .max = 3,
-+ .id = RT305X_ESW_ATTR_BC_STATUS,
-+ .get = rt305x_esw_get_bc_status,
-+ .set = rt305x_esw_set_bc_status,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "led_frequency",
-+ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
-+ .max = 3,
-+ .id = RT305X_ESW_ATTR_LED_FREQ,
-+ .get = rt305x_esw_get_led_freq,
-+ .set = rt305x_esw_set_led_freq,
-+ }
-+};
-+
-+static const struct switch_attr esw_port[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "disable",
-+ .description = "Port state (1:disabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_DISABLE,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "doubletag",
-+ .description = "Double tagging for incoming vlan packets "
-+ "(1:enabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "untag",
-+ .description = "Untag (1:strip outgoing vlan tag)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_UNTAG,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "led",
-+ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
-+ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
-+ " 8:100mact, 10:blink, 11:off, 12:on)",
-+ .max = 15,
-+ .id = RT305X_ESW_ATTR_PORT_LED,
-+ .get = esw_get_port_led,
-+ .set = esw_set_port_led,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "lan",
-+ .description = "HW port group (0:wan, 1:lan)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_LAN,
-+ .get = esw_get_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "recv_bad",
-+ .description = "Receive bad packet counter",
-+ .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
-+ .get = esw_get_port_recv_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "recv_good",
-+ .description = "Receive good packet counter",
-+ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+ .get = esw_get_port_recv_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "tr_bad",
-+
-+ .description = "Transmit bad packet counter. rt5350 only",
-+ .id = RT5350_ESW_ATTR_PORT_TR_BAD,
-+ .get = esw_get_port_tr_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "tr_good",
-+
-+ .description = "Transmit good packet counter. rt5350 only",
-+ .id = RT5350_ESW_ATTR_PORT_TR_GOOD,
-+ .get = esw_get_port_tr_badgood,
-+ },
-+};
-+
-+static const struct switch_attr esw_vlan[] = {
-+};
-+
-+static const struct switch_dev_ops esw_ops = {
-+ .attr_global = {
-+ .attr = esw_global,
-+ .n_attr = ARRAY_SIZE(esw_global),
-+ },
-+ .attr_port = {
-+ .attr = esw_port,
-+ .n_attr = ARRAY_SIZE(esw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = esw_vlan,
-+ .n_attr = ARRAY_SIZE(esw_vlan),
-+ },
-+ .get_vlan_ports = esw_get_vlan_ports,
-+ .set_vlan_ports = esw_set_vlan_ports,
-+ .get_port_pvid = esw_get_port_pvid,
-+ .set_port_pvid = esw_set_port_pvid,
-+ .get_port_link = esw_get_port_link,
-+ .apply_config = esw_apply_config,
-+ .reset_switch = esw_reset_switch,
-+};
-+
-+static struct rt305x_esw_platform_data rt3050_esw_data = {
-+ /* All ports are LAN ports. */
-+ .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE,
-+ .reg_initval_fct2 = 0x00d6500c,
-+ /*
-+ * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
-+ * turbo mii off, rgmi 3.3v off
-+ * port5: disabled
-+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
-+ */
-+ .reg_initval_fpa2 = 0x3f502b28,
-+};
-+
-+static const struct of_device_id ralink_esw_match[] = {
-+ { .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_esw_match);
-+
-+static int esw_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ const struct rt305x_esw_platform_data *pdata;
-+ const __be32 *port_map, *reg_init;
-+ struct rt305x_esw *esw;
-+ struct switch_dev *swdev;
-+ struct resource *res, *irq;
-+ int err;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata) {
-+ const struct of_device_id *match;
-+ match = of_match_device(ralink_esw_match, &pdev->dev);
-+ if (match)
-+ pdata = (struct rt305x_esw_platform_data *) match->data;
-+ }
-+ if (!pdata)
-+ return -EINVAL;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENOMEM;
-+ }
-+
-+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!irq) {
-+ dev_err(&pdev->dev, "no irq resource found\n");
-+ return -ENOMEM;
-+ }
-+
-+ esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL);
-+ if (!esw) {
-+ dev_err(&pdev->dev, "no memory for private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ esw->dev = &pdev->dev;
-+ esw->irq = irq->start;
-+ esw->base = ioremap(res->start, resource_size(res));
-+ if (!esw->base) {
-+ dev_err(&pdev->dev, "ioremap failed\n");
-+ err = -ENOMEM;
-+ goto free_esw;
-+ }
-+
-+ port_map = of_get_property(np, "ralink,portmap", NULL);
-+ if (port_map)
-+ esw->port_map = be32_to_cpu(*port_map);
-+
-+ reg_init = of_get_property(np, "ralink,fct2", NULL);
-+ if (reg_init)
-+ esw->reg_initval_fct2 = be32_to_cpu(*reg_init);
-+
-+ reg_init = of_get_property(np, "ralink,fpa2", NULL);
-+ if (reg_init)
-+ esw->reg_initval_fpa2 = be32_to_cpu(*reg_init);
-+
-+ reg_init = of_get_property(np, "ralink,led_polarity", NULL);
-+ if (reg_init)
-+ esw->reg_led_polarity = be32_to_cpu(*reg_init);
-+
-+ swdev = &esw->swdev;
-+ swdev->of_node = pdev->dev.of_node;
-+ swdev->name = "rt305x-esw";
-+ swdev->alias = "rt305x";
-+ swdev->cpu_port = RT305X_ESW_PORT6;
-+ swdev->ports = RT305X_ESW_NUM_PORTS;
-+ swdev->vlans = RT305X_ESW_NUM_VIDS;
-+ swdev->ops = &esw_ops;
-+
-+ err = register_switch(swdev, NULL);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "register_switch failed\n");
-+ goto unmap_base;
-+ }
-+
-+ platform_set_drvdata(pdev, esw);
-+
-+ esw->pdata = pdata;
-+ spin_lock_init(&esw->reg_rw_lock);
-+
-+ esw_hw_init(esw);
-+
-+ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
-+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
-+ request_irq(esw->irq, esw_interrupt, 0, "esw", esw);
-+
-+ return 0;
-+
-+unmap_base:
-+ iounmap(esw->base);
-+free_esw:
-+ kfree(esw);
-+ return err;
-+}
-+
-+static int esw_remove(struct platform_device *pdev)
-+{
-+ struct rt305x_esw *esw;
-+
-+ esw = platform_get_drvdata(pdev);
-+ if (esw) {
-+ unregister_switch(&esw->swdev);
-+ platform_set_drvdata(pdev, NULL);
-+ iounmap(esw->base);
-+ kfree(esw);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver esw_driver = {
-+ .probe = esw_probe,
-+ .remove = esw_remove,
-+ .driver = {
-+ .name = "rt305x-esw",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_esw_match,
-+ },
-+};
-+
-+int __init rtesw_init(void)
-+{
-+ return platform_driver_register(&esw_driver);
-+}
-+
-+void rtesw_exit(void)
-+{
-+ platform_driver_unregister(&esw_driver);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/esw_rt3052.h
-@@ -0,0 +1,32 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RALINK_ESW_RT3052_H__
-+#define _RALINK_ESW_RT3052_H__
-+
-+#ifdef CONFIG_NET_RALINK_ESW_RT3052
-+
-+int __init rtesw_init(void);
-+void rtesw_exit(void);
-+
-+#else
-+
-+static inline int __init rtesw_init(void) { return 0; }
-+static inline void rtesw_exit(void) { }
-+
-+#endif
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
-@@ -0,0 +1,566 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/switch.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+
-+#include <linux/ioport.h>
-+#include <linux/switch.h>
-+#include <linux/mii.h>
-+
-+#include <ralink_regs.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "gsw_mt7620a.h"
-+#include "mt7530.h"
-+#include "mdio.h"
-+
-+#define GSW_REG_PHY_TIMEOUT (5 * HZ)
-+
-+#define MT7620A_GSW_REG_PIAC 0x7004
-+
-+#define GSW_NUM_VLANS 16
-+#define GSW_NUM_VIDS 4096
-+#define GSW_NUM_PORTS 7
-+#define GSW_PORT6 6
-+
-+#define GSW_MDIO_ACCESS BIT(31)
-+#define GSW_MDIO_READ BIT(19)
-+#define GSW_MDIO_WRITE BIT(18)
-+#define GSW_MDIO_START BIT(16)
-+#define GSW_MDIO_ADDR_SHIFT 20
-+#define GSW_MDIO_REG_SHIFT 25
-+
-+#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
-+#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
-+#define GSW_REG_SMACCR0 0x3fE4
-+#define GSW_REG_SMACCR1 0x3fE8
-+#define GSW_REG_CKGCR 0x3ff0
-+
-+#define GSW_REG_IMR 0x7008
-+#define GSW_REG_ISR 0x700c
-+
-+#define SYSC_REG_CFG1 0x14
-+
-+#define PORT_IRQ_ST_CHG 0x7f
-+
-+#define SYSCFG1 0x14
-+
-+#define ESW_PHY_POLLING 0x7000
-+
-+#define PMCR_IPG BIT(18)
-+#define PMCR_MAC_MODE BIT(16)
-+#define PMCR_FORCE BIT(15)
-+#define PMCR_TX_EN BIT(14)
-+#define PMCR_RX_EN BIT(13)
-+#define PMCR_BACKOFF BIT(9)
-+#define PMCR_BACKPRES BIT(8)
-+#define PMCR_RX_FC BIT(5)
-+#define PMCR_TX_FC BIT(4)
-+#define PMCR_SPEED(_x) (_x << 2)
-+#define PMCR_DUPLEX BIT(1)
-+#define PMCR_LINK BIT(0)
-+
-+#define PHY_AN_EN BIT(31)
-+#define PHY_PRE_EN BIT(30)
-+#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
-+
-+enum {
-+ /* Global attributes. */
-+ GSW_ATTR_ENABLE_VLAN,
-+ /* Port attributes. */
-+ GSW_ATTR_PORT_UNTAG,
-+};
-+
-+enum {
-+ PORT4_EPHY = 0,
-+ PORT4_EXT,
-+};
-+
-+struct mt7620_gsw {
-+ struct device *dev;
-+ void __iomem *base;
-+ int irq;
-+ int port4;
-+ long unsigned int autopoll;
-+};
-+
-+static inline void gsw_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
-+{
-+ iowrite32(val, gsw->base + reg);
-+}
-+
-+static inline u32 gsw_r32(struct mt7620_gsw *gsw, unsigned reg)
-+{
-+ return ioread32(gsw->base + reg);
-+}
-+
-+static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
-+{
-+ unsigned long t_start = jiffies;
-+
-+ while (1) {
-+ if (!(gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
-+ return 0;
-+ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT)) {
-+ break;
-+ }
-+ }
-+
-+ printk(KERN_ERR "mdio: MDIO timeout\n");
-+ return -1;
-+}
-+
-+static u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register,
-+ u32 write_data)
-+{
-+ if (mt7620_mii_busy_wait(gsw))
-+ return -1;
-+
-+ write_data &= 0xffff;
-+
-+ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
-+ (phy_register << GSW_MDIO_REG_SHIFT) |
-+ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
-+ MT7620A_GSW_REG_PIAC);
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+static u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg)
-+{
-+ u32 d;
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return 0xffff;
-+
-+ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
-+ (phy_reg << GSW_MDIO_REG_SHIFT) |
-+ (phy_addr << GSW_MDIO_ADDR_SHIFT),
-+ MT7620A_GSW_REG_PIAC);
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return 0xffff;
-+
-+ d = gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
-+
-+ return d;
-+}
-+
-+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+
-+ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
-+}
-+
-+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+
-+ return _mt7620_mii_read(gsw, phy_addr, phy_reg);
-+}
-+
-+static unsigned char *fe_speed_str(int speed)
-+{
-+ switch (speed) {
-+ case 2:
-+ case SPEED_1000:
-+ return "1000";
-+ case 1:
-+ case SPEED_100:
-+ return "100";
-+ case 0:
-+ case SPEED_10:
-+ return "10";
-+ }
-+
-+ return "? ";
-+}
-+
-+int mt7620a_has_carrier(struct fe_priv *priv)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+ int i;
-+
-+ for (i = 0; i < GSW_PORT6; i++)
-+ if (gsw_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
-+ return 1;
-+ return 0;
-+}
-+
-+static void mt7620a_handle_carrier(struct fe_priv *priv)
-+{
-+ if (!priv->phy)
-+ return;
-+
-+ if (mt7620a_has_carrier(priv))
-+ netif_carrier_on(priv->netdev);
-+ else
-+ netif_carrier_off(priv->netdev);
-+}
-+
-+void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
-+{
-+ if (priv->link[port])
-+ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
-+ port, fe_speed_str(priv->phy->speed[port]),
-+ (DUPLEX_FULL == priv->phy->duplex[port]) ? "Full" : "Half");
-+ else
-+ netdev_info(priv->netdev, "port %d link down\n", port);
-+ mt7620a_handle_carrier(priv);
-+}
-+
-+static irqreturn_t gsw_interrupt(int irq, void *_priv)
-+{
-+ struct fe_priv *priv = (struct fe_priv *) _priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+ u32 status;
-+ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
-+
-+ status = gsw_r32(gsw, GSW_REG_ISR);
-+ if (status & PORT_IRQ_ST_CHG)
-+ for (i = 0; i <= max; i++) {
-+ u32 status = gsw_r32(gsw, GSW_REG_PORT_STATUS(i));
-+ int link = status & 0x1;
-+
-+ if (link != priv->link[i]) {
-+ if (link)
-+ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
-+ i, fe_speed_str((status >> 2) & 3),
-+ (status & 0x2) ? "Full" : "Half");
-+ else
-+ netdev_info(priv->netdev, "port %d link down\n", i);
-+ }
-+
-+ priv->link[i] = link;
-+ }
-+ mt7620a_handle_carrier(priv);
-+
-+ gsw_w32(gsw, status, GSW_REG_ISR);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int mt7620_is_bga(void)
-+{
-+ u32 bga = rt_sysc_r32(0x0c);
-+
-+ return (bga >> 16) & 1;
-+}
-+
-+static void gsw_auto_poll(struct mt7620_gsw *gsw)
-+{
-+ int phy;
-+ int lsb = -1, msb = 0;
-+
-+ for_each_set_bit(phy, &gsw->autopoll, 32) {
-+ if (lsb < 0)
-+ lsb = phy;
-+ msb = phy;
-+ }
-+
-+ gsw_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) | (msb << 8) | lsb, ESW_PHY_POLLING);
-+}
-+
-+void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+ const __be32 *_id = of_get_property(np, "reg", NULL);
-+ int phy_mode, size, id;
-+ int shift = 12;
-+ u32 val, mask = 0;
-+ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
-+
-+ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
-+ if (_id)
-+ pr_err("%s: invalid port id %d\n", np->name, be32_to_cpu(*_id));
-+ else
-+ pr_err("%s: invalid port id\n", np->name);
-+ return;
-+ }
-+
-+ id = be32_to_cpu(*_id);
-+
-+ if (id == 4)
-+ shift = 14;
-+
-+ priv->phy->phy_fixed[id] = of_get_property(np, "ralink,fixed-link", &size);
-+ if (priv->phy->phy_fixed[id] && (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
-+ pr_err("%s: invalid fixed link property\n", np->name);
-+ priv->phy->phy_fixed[id] = NULL;
-+ return;
-+ }
-+
-+ phy_mode = of_get_phy_mode(np);
-+ switch (phy_mode) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ mask = 0;
-+ break;
-+ case PHY_INTERFACE_MODE_MII:
-+ mask = 1;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ mask = 2;
-+ break;
-+ default:
-+ dev_err(priv->device, "port %d - invalid phy mode\n", id);
-+ return;
-+ }
-+
-+ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
-+ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
-+ return;
-+
-+ val = rt_sysc_r32(SYSCFG1);
-+ val &= ~(3 << shift);
-+ val |= mask << shift;
-+ rt_sysc_w32(val, SYSCFG1);
-+
-+ if (priv->phy->phy_fixed[id]) {
-+ const __be32 *link = priv->phy->phy_fixed[id];
-+ int tx_fc, rx_fc;
-+ u32 val = 0;
-+
-+ priv->phy->speed[id] = be32_to_cpup(link++);
-+ tx_fc = be32_to_cpup(link++);
-+ rx_fc = be32_to_cpup(link++);
-+ priv->phy->duplex[id] = be32_to_cpup(link++);
-+ priv->link[id] = 1;
-+
-+ switch (priv->phy->speed[id]) {
-+ case SPEED_10:
-+ val = 0;
-+ break;
-+ case SPEED_100:
-+ val = 1;
-+ break;
-+ case SPEED_1000:
-+ val = 2;
-+ break;
-+ default:
-+ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[id]);
-+ priv->phy->phy_fixed[id] = 0;
-+ return;
-+ }
-+ val = PMCR_SPEED(val);
-+ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
-+ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
-+ if (tx_fc)
-+ val |= PMCR_TX_FC;
-+ if (rx_fc)
-+ val |= PMCR_RX_FC;
-+ if (priv->phy->duplex[id])
-+ val |= PMCR_DUPLEX;
-+ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
-+ dev_info(priv->device, "using fixed link parameters\n");
-+ return;
-+ }
-+
-+ if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
-+ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
-+ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG;
-+
-+ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id));
-+ fe_connect_phy_node(priv, priv->phy->phy_node[id]);
-+ gsw->autopoll |= BIT(id);
-+ gsw_auto_poll(gsw);
-+ return;
-+ }
-+}
-+
-+static void gsw_hw_init(struct mt7620_gsw *gsw)
-+{
-+ u32 is_BGA = mt7620_is_bga();
-+
-+ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
-+ gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
-+
-+ /*correct PHY setting L3.0 BGA*/
-+ _mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4
-+
-+ _mt7620_mii_write(gsw, 1, 17, 0x7444);
-+ if (is_BGA)
-+ _mt7620_mii_write(gsw, 1, 19, 0x0114);
-+ else
-+ _mt7620_mii_write(gsw, 1, 19, 0x0117);
-+
-+ _mt7620_mii_write(gsw, 1, 22, 0x10cf);
-+ _mt7620_mii_write(gsw, 1, 25, 0x6212);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0777);
-+ _mt7620_mii_write(gsw, 1, 29, 0x4000);
-+ _mt7620_mii_write(gsw, 1, 28, 0xc077);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0000);
-+
-+ _mt7620_mii_write(gsw, 1, 31, 0x3000); //global, page 3
-+ _mt7620_mii_write(gsw, 1, 17, 0x4838);
-+
-+ _mt7620_mii_write(gsw, 1, 31, 0x2000); //global, page 2
-+ if (is_BGA) {
-+ _mt7620_mii_write(gsw, 1, 21, 0x0515);
-+ _mt7620_mii_write(gsw, 1, 22, 0x0053);
-+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0aaf);
-+ _mt7620_mii_write(gsw, 1, 25, 0x0fad);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0fc1);
-+ } else {
-+ _mt7620_mii_write(gsw, 1, 21, 0x0517);
-+ _mt7620_mii_write(gsw, 1, 22, 0x0fd2);
-+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0aab);
-+ _mt7620_mii_write(gsw, 1, 25, 0x00ae);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0fff);
-+ }
-+ _mt7620_mii_write(gsw, 1, 31, 0x1000); //global, page 1
-+ _mt7620_mii_write(gsw, 1, 17, 0xe7f8);
-+
-+ _mt7620_mii_write(gsw, 1, 31, 0x8000); //local, page 0
-+ _mt7620_mii_write(gsw, 0, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 1, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 2, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 3, 30, 0xa000);
-+
-+ _mt7620_mii_write(gsw, 0, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 1, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 2, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 3, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 1, 31, 0xa000); //local, page 2
-+ _mt7620_mii_write(gsw, 0, 16, 0x1111);
-+ _mt7620_mii_write(gsw, 1, 16, 0x1010);
-+ _mt7620_mii_write(gsw, 2, 16, 0x1515);
-+ _mt7620_mii_write(gsw, 3, 16, 0x0f0f);
-+
-+ /* CPU Port6 Force Link 1G, FC ON */
-+ gsw_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
-+ /* Set Port6 CPU Port */
-+ gsw_w32(gsw, 0x7f7f7fe0, 0x0010);
-+
-+ /* setup port 4 */
-+ if (gsw->port4 == PORT4_EPHY) {
-+ u32 val = rt_sysc_r32(SYSCFG1);
-+ val |= 3 << 14;
-+ rt_sysc_w32(val, SYSCFG1);
-+ _mt7620_mii_write(gsw, 4, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 4, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 4, 16, 0x1313);
-+ pr_info("gsw: setting port4 to ephy mode\n");
-+ }
-+}
-+
-+void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ gsw_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
-+ gsw_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ GSW_REG_SMACCR0);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static struct of_device_id gsw_match[] = {
-+ { .compatible = "ralink,mt7620a-gsw" },
-+ {}
-+};
-+
-+int mt7620_gsw_config(struct fe_priv *priv)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+
-+ /* is the mt7530 internal or external */
-+ if ((_mt7620_mii_read(gsw, 0x1f, 2) == 1) && (_mt7620_mii_read(gsw, 0x1f, 3) == 0xbeef))
-+ mt7530_probe(priv->device, NULL, priv->mii_bus);
-+ else
-+ mt7530_probe(priv->device, gsw->base, NULL);
-+
-+ return 0;
-+}
-+
-+int mt7620_gsw_probe(struct fe_priv *priv)
-+{
-+ struct mt7620_gsw *gsw;
-+ struct device_node *np;
-+ const char *port4 = NULL;
-+
-+ np = of_find_matching_node(NULL, gsw_match);
-+ if (!np) {
-+ dev_err(priv->device, "no gsw node found\n");
-+ return -EINVAL;
-+ }
-+ np = of_node_get(np);
-+
-+ gsw = devm_kzalloc(priv->device, sizeof(struct mt7620_gsw), GFP_KERNEL);
-+ if (!gsw) {
-+ dev_err(priv->device, "no gsw memory for private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ gsw->irq = irq_of_parse_and_map(np, 0);
-+ if (!gsw->irq) {
-+ dev_err(priv->device, "no gsw irq resource found\n");
-+ return -ENOMEM;
-+ }
-+
-+ gsw->base = of_iomap(np, 0);
-+ if (!gsw->base) {
-+ dev_err(priv->device, "gsw ioremap failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ gsw->dev = priv->device;
-+ priv->soc->swpriv = gsw;
-+
-+ of_property_read_string(np, "ralink,port4", &port4);
-+ if (port4 && !strcmp(port4, "ephy"))
-+ gsw->port4 = PORT4_EPHY;
-+ else if (port4 && !strcmp(port4, "gmac"))
-+ gsw->port4 = PORT4_EXT;
-+ else
-+ WARN_ON(port4);
-+
-+ gsw_hw_init(gsw);
-+
-+ gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
-+ request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
-@@ -0,0 +1,30 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RALINK_GSW_MT7620_H__
-+#define _RALINK_GSW_MT7620_H__
-+
-+extern int mt7620_gsw_config(struct fe_priv *priv);
-+extern int mt7620_gsw_probe(struct fe_priv *priv);
-+extern void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac);
-+extern int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+extern int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
-+extern void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
-+extern void mt7620_port_init(struct fe_priv *priv, struct device_node *np);
-+extern int mt7620a_has_carrier(struct fe_priv *priv);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mdio.c
-@@ -0,0 +1,244 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "mdio.h"
-+
-+static int fe_mdio_reset(struct mii_bus *bus)
-+{
-+ /* TODO */
-+ return 0;
-+}
-+
-+static void fe_phy_link_adjust(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ for (i = 0; i < 8; i++) {
-+ if (priv->phy->phy_node[i]) {
-+ struct phy_device *phydev = priv->phy->phy[i];
-+ int status_change = 0;
-+
-+ if (phydev->link)
-+ if (priv->phy->duplex[i] != phydev->duplex ||
-+ priv->phy->speed[i] != phydev->speed)
-+ status_change = 1;
-+
-+ if (phydev->link != priv->link[i])
-+ status_change = 1;
-+
-+ switch (phydev->speed) {
-+ case SPEED_1000:
-+ case SPEED_100:
-+ case SPEED_10:
-+ priv->link[i] = phydev->link;
-+ priv->phy->duplex[i] = phydev->duplex;
-+ priv->phy->speed[i] = phydev->speed;
-+
-+ if (status_change && priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ break;
-+ }
-+ }
-+ }
-+}
-+
-+int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
-+{
-+ const __be32 *_port = NULL;
-+ struct phy_device *phydev;
-+ int phy_mode, port;
-+
-+ _port = of_get_property(phy_node, "reg", NULL);
-+
-+ if (!_port || (be32_to_cpu(*_port) >= 0x20)) {
-+ pr_err("%s: invalid port id\n", phy_node->name);
-+ return -EINVAL;
-+ }
-+ port = be32_to_cpu(*_port);
-+ phy_mode = of_get_phy_mode(phy_node);
-+ if (phy_mode < 0) {
-+ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
-+ priv->phy->phy_node[port] = NULL;
-+ return -EINVAL;
-+ }
-+
-+ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
-+ 0, phy_mode);
-+ if (IS_ERR(phydev)) {
-+ dev_err(priv->device, "could not connect to PHY\n");
-+ priv->phy->phy_node[port] = NULL;
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= PHY_GBIT_FEATURES;
-+ phydev->advertising = phydev->supported;
-+ phydev->no_auto_carrier_off = 1;
-+
-+ dev_info(priv->device,
-+ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
-+ port, dev_name(&phydev->dev), phydev->phy_id,
-+ phydev->drv->name);
-+
-+ priv->phy->phy[port] = phydev;
-+ priv->link[port] = 0;
-+
-+ return 0;
-+}
-+
-+static int fe_phy_connect(struct fe_priv *priv)
-+{
-+ return 0;
-+}
-+
-+static void fe_phy_disconnect(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++)
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 0;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_disconnect(priv->phy->phy[i]);
-+ }
-+}
-+
-+static void fe_phy_start(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++) {
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 1;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_start(priv->phy->phy[i]);
-+ }
-+ }
-+}
-+
-+static void fe_phy_stop(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++)
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 0;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_stop(priv->phy->phy[i]);
-+ }
-+}
-+
-+static struct fe_phy phy_ralink = {
-+ .connect = fe_phy_connect,
-+ .disconnect = fe_phy_disconnect,
-+ .start = fe_phy_start,
-+ .stop = fe_phy_stop,
-+};
-+
-+int fe_mdio_init(struct fe_priv *priv)
-+{
-+ struct device_node *mii_np;
-+ int err;
-+
-+ if (!priv->soc->mdio_read || !priv->soc->mdio_write)
-+ return 0;
-+
-+ spin_lock_init(&phy_ralink.lock);
-+ priv->phy = &phy_ralink;
-+
-+ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
-+ if (!mii_np) {
-+ dev_err(priv->device, "no %s child node found", "mdio-bus");
-+ return -ENODEV;
-+ }
-+
-+ if (!of_device_is_available(mii_np)) {
-+ err = 0;
-+ goto err_put_node;
-+ }
-+
-+ priv->mii_bus = mdiobus_alloc();
-+ if (priv->mii_bus == NULL) {
-+ err = -ENOMEM;
-+ goto err_put_node;
-+ }
-+
-+ priv->mii_bus->name = "mdio";
-+ priv->mii_bus->read = priv->soc->mdio_read;
-+ priv->mii_bus->write = priv->soc->mdio_write;
-+ priv->mii_bus->reset = fe_mdio_reset;
-+ priv->mii_bus->irq = priv->mii_irq;
-+ priv->mii_bus->priv = priv;
-+ priv->mii_bus->parent = priv->device;
-+
-+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
-+ err = of_mdiobus_register(priv->mii_bus, mii_np);
-+ if (err)
-+ goto err_free_bus;
-+
-+ return 0;
-+
-+err_free_bus:
-+ kfree(priv->mii_bus);
-+err_put_node:
-+ of_node_put(mii_np);
-+ priv->mii_bus = NULL;
-+ return err;
-+}
-+
-+void fe_mdio_cleanup(struct fe_priv *priv)
-+{
-+ if (!priv->mii_bus)
-+ return;
-+
-+ mdiobus_unregister(priv->mii_bus);
-+ of_node_put(priv->mii_bus->dev.of_node);
-+ kfree(priv->mii_bus);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mdio.h
-@@ -0,0 +1,29 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RALINK_MDIO_H__
-+#define _RALINK_MDIO_H__
-+
-+#ifdef CONFIG_NET_RALINK_MDIO
-+extern int fe_mdio_init(struct fe_priv *priv);
-+extern void fe_mdio_cleanup(struct fe_priv *priv);
-+extern int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node);
-+#else
-+static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
-+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
-+#endif
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
-@@ -0,0 +1,232 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "mdio_rt2880.h"
-+#include "mdio.h"
-+
-+#define FE_MDIO_RETRY 1000
-+
-+static unsigned char *rt2880_speed_str(struct fe_priv *priv)
-+{
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_1000:
-+ return "1000";
-+ case SPEED_100:
-+ return "100";
-+ case SPEED_10:
-+ return "10";
-+ }
-+
-+ return "?";
-+}
-+
-+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
-+{
-+ u32 mdio_cfg;
-+
-+ if (!priv->link[0]) {
-+ netif_carrier_off(priv->netdev);
-+ netdev_info(priv->netdev, "link down\n");
-+ return;
-+ }
-+
-+ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
-+ FE_MDIO_CFG_RX_CLK_SKEW_200 |
-+ FE_MDIO_CFG_GP1_FRC_EN;
-+
-+ if (priv->phy->duplex[0] == DUPLEX_FULL)
-+ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
-+
-+ if (priv->phy->tx_fc[0])
-+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
-+
-+ if (priv->phy->rx_fc[0])
-+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
-+
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_10:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
-+ break;
-+ case SPEED_100:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
-+ break;
-+ case SPEED_1000:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ fe_w32(mdio_cfg, FE_MDIO_CFG);
-+
-+ netif_carrier_on(priv->netdev);
-+ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
-+ rt2880_speed_str(priv),
-+ (DUPLEX_FULL == priv->phy->duplex[0]) ? "Full" : "Half");
-+}
-+
-+static int rt2880_mdio_wait_ready(struct fe_priv *priv)
-+{
-+ int retries;
-+
-+ retries = FE_MDIO_RETRY;
-+ while (1) {
-+ u32 t;
-+
-+ t = fe_r32(FE_MDIO_ACCESS);
-+ if ((t & (0x1 << 31)) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(1);
-+ }
-+
-+ dev_err(priv->device, "MDIO operation timed out\n");
-+ return -ETIMEDOUT;
-+}
-+
-+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ int err;
-+ u32 t;
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return 0xffff;
-+
-+ t = (phy_addr << 24) | (phy_reg << 16);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+ t |= (1 << 31);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return 0xffff;
-+
-+ pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-+
-+ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
-+}
-+
-+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ int err;
-+ u32 t;
-+
-+ pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return err;
-+
-+ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
-+ fe_w32(t, FE_MDIO_ACCESS);
-+ t |= (1 << 31);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+
-+ return rt2880_mdio_wait_ready(priv);
-+}
-+
-+void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
-+{
-+ const __be32 *id = of_get_property(np, "reg", NULL);
-+ const __be32 *link;
-+ int size;
-+ int phy_mode;
-+
-+ if (!id || (be32_to_cpu(*id) != 0)) {
-+ pr_err("%s: invalid port id\n", np->name);
-+ return;
-+ }
-+
-+ priv->phy->phy_fixed[0] = of_get_property(np, "ralink,fixed-link", &size);
-+ if (priv->phy->phy_fixed[0] && (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
-+ pr_err("%s: invalid fixed link property\n", np->name);
-+ priv->phy->phy_fixed[0] = NULL;
-+ return;
-+ }
-+
-+ phy_mode = of_get_phy_mode(np);
-+ switch (phy_mode) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ break;
-+ case PHY_INTERFACE_MODE_MII:
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ break;
-+ default:
-+ if (!priv->phy->phy_fixed[0])
-+ dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[0]);
-+ break;
-+ }
-+
-+ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
-+ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
-+ return;
-+
-+ if (priv->phy->phy_fixed[0]) {
-+ link = priv->phy->phy_fixed[0];
-+ priv->phy->speed[0] = be32_to_cpup(link++);
-+ priv->phy->duplex[0] = be32_to_cpup(link++);
-+ priv->phy->tx_fc[0] = be32_to_cpup(link++);
-+ priv->phy->rx_fc[0] = be32_to_cpup(link++);
-+
-+ priv->link[0] = 1;
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_10:
-+ break;
-+ case SPEED_100:
-+ break;
-+ case SPEED_1000:
-+ break;
-+ default:
-+ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[0]);
-+ priv->phy->phy_fixed[0] = 0;
-+ return;
-+ }
-+ dev_info(priv->device, "using fixed link parameters\n");
-+ rt2880_mdio_link_adjust(priv, 0);
-+ return;
-+ }
-+ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0]) {
-+ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
-+ }
-+
-+ return;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
-@@ -0,0 +1,26 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RALINK_MDIO_RT2880_H__
-+#define _RALINK_MDIO_RT2880_H__
-+
-+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
-+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
-+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mt7530.c
-@@ -0,0 +1,579 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/if.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/if_ether.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include <linux/netlink.h>
-+#include <linux/bitops.h>
-+#include <net/genetlink.h>
-+#include <linux/switch.h>
-+#include <linux/delay.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/lockdep.h>
-+#include <linux/workqueue.h>
-+#include <linux/of_device.h>
-+
-+#include "mt7530.h"
-+
-+#define MT7530_CPU_PORT 6
-+#define MT7530_NUM_PORTS 8
-+#define MT7530_NUM_VLANS 16
-+#define MT7530_MAX_VID 4095
-+#define MT7530_MIN_VID 0
-+
-+/* registers */
-+#define REG_ESW_VLAN_VTCR 0x90
-+#define REG_ESW_VLAN_VAWD1 0x94
-+#define REG_ESW_VLAN_VAWD2 0x98
-+#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
-+
-+#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
-+#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
-+#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
-+
-+/* vlan egress mode */
-+enum {
-+ ETAG_CTRL_UNTAG = 0,
-+ ETAG_CTRL_TAG = 2,
-+ ETAG_CTRL_SWAP = 1,
-+ ETAG_CTRL_STACK = 3,
-+};
-+
-+#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
-+#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
-+#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
-+enum {
-+ /* Global attributes. */
-+ MT7530_ATTR_ENABLE_VLAN,
-+};
-+
-+struct mt7530_port_entry {
-+ u16 pvid;
-+};
-+
-+struct mt7530_vlan_entry {
-+ u16 vid;
-+ u8 member;
-+ u8 etags;
-+};
-+
-+struct mt7530_priv {
-+ void __iomem *base;
-+ struct mii_bus *bus;
-+ struct switch_dev swdev;
-+
-+ bool global_vlan_enable;
-+ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
-+ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
-+};
-+
-+struct mt7530_mapping {
-+ char *name;
-+ u16 pvids[MT7530_NUM_PORTS];
-+ u8 members[MT7530_NUM_VLANS];
-+ u8 etags[MT7530_NUM_VLANS];
-+ u16 vids[MT7530_NUM_VLANS];
-+} mt7530_defaults[] = {
-+ {
-+ .name = "llllw",
-+ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
-+ .members = { 0, 0x6f, 0x50 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ }, {
-+ .name = "wllll",
-+ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
-+ .members = { 0, 0x7e, 0x41 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ },
-+};
-+
-+struct mt7530_mapping*
-+mt7530_find_mapping(struct device_node *np)
-+{
-+ const char *map;
-+ int i;
-+
-+ if (of_property_read_string(np, "ralink,port-map", &map))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
-+ if (!strcmp(map, mt7530_defaults[i].name))
-+ return &mt7530_defaults[i];
-+
-+ return NULL;
-+}
-+
-+static void
-+mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
-+{
-+ int i = 0;
-+
-+ mt7530->global_vlan_enable = 1;
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530->port_entries[i].pvid = map->pvids[i];
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ mt7530->vlan_entries[i].member = map->members[i];
-+ mt7530->vlan_entries[i].etags = map->etags[i];
-+ mt7530->vlan_entries[i].vid = map->vids[i];
-+ }
-+}
-+
-+static int
-+mt7530_reset_switch(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int i;
-+
-+ memset(priv->port_entries, 0, sizeof(priv->port_entries));
-+ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
-+
-+ /* set default vid of each vlan to the same number of vlan, so the vid
-+ * won't need be set explicitly.
-+ */
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ priv->vlan_entries[i].vid = i;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ val->value.i = priv->global_vlan_enable;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ priv->global_vlan_enable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static u32
-+mt7530_r32(struct mt7530_priv *priv, u32 reg)
-+{
-+ u32 val;
-+ if (priv->bus) {
-+ u16 high, low;
-+
-+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf);
-+ high = mdiobus_read(priv->bus, 0x1f, 0x10);
-+
-+ return (high << 16) | (low & 0xffff);
-+ }
-+
-+ val = ioread32(priv->base + reg);
-+ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
-+
-+ return val;
-+}
-+
-+static void
-+mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val)
-+{
-+ if (priv->bus) {
-+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
-+ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16);
-+ return;
-+ }
-+
-+ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
-+ iowrite32(val, priv->base + reg);
-+}
-+
-+static void
-+mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val)
-+{
-+ int i;
-+
-+ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
-+
-+ for (i = 0; i < 20; i++) {
-+ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR);
-+
-+ if ((val & BIT(31)) == 0)
-+ break;
-+
-+ udelay(1000);
-+ }
-+ if (i == 20)
-+ printk("mt7530: vtcr timeout\n");
-+}
-+
-+static int
-+mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port));
-+ *val &= 0xfff;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ priv->port_entries[port].pvid = pvid;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 member;
-+ u32 etags;
-+ int i;
-+
-+ val->len = 0;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ mt7530_vtcr(priv, 0, val->port_vlan);
-+
-+ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1);
-+ member >>= 16;
-+ member &= 0xff;
-+
-+ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ struct switch_port *p;
-+ int etag;
-+
-+ if (!(member & BIT(i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+
-+ etag = (etags >> (i * 2)) & 0x3;
-+
-+ if (etag == ETAG_CTRL_TAG)
-+ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
-+ else if (etag != ETAG_CTRL_UNTAG)
-+ printk("vlan egress tag control neither untag nor tag.\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u8 member = 0;
-+ u8 etags = 0;
-+ int i;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
-+ val->len > MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ if (p->id >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ member |= BIT(p->id);
-+
-+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
-+ etags |= BIT(p->id);
-+ }
-+ priv->vlan_entries[val->port_vlan].member = member;
-+ priv->vlan_entries[val->port_vlan].etags = etags;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int vlan;
-+ u16 vid;
-+
-+ vlan = val->port_vlan;
-+ vid = (u16)val->value.i;
-+
-+ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ priv->vlan_entries[vlan].vid = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 vid;
-+ int vlan;
-+
-+ vlan = val->port_vlan;
-+
-+ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan));
-+ if (vlan & 1)
-+ vid = vid >> 12;
-+ vid &= 0xfff;
-+
-+ val->value.i = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_apply_config(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int i, j;
-+
-+ if (!priv->global_vlan_enable) {
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0000);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x8100000c);
-+
-+ return 0;
-+ }
-+
-+ /* set all ports as security mode */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
-+
-+ /* set all ports as user port */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x81000000);
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ u16 vid = priv->vlan_entries[i].vid;
-+ u8 member = priv->vlan_entries[i].member;
-+ u8 etags = priv->vlan_entries[i].etags;
-+ u32 val;
-+
-+ /* vid of vlan */
-+ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
-+ if (i % 2 == 0) {
-+ val &= 0xfff000;
-+ val |= vid;
-+ } else {
-+ val &= 0xfff;
-+ val |= (vid << 12);
-+ }
-+ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
-+
-+ /* vlan port membership */
-+ if (member)
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
-+ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
-+ REG_ESW_VLAN_VAWD1_VALID);
-+ else
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
-+
-+ /* egress mode */
-+ val = 0;
-+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
-+ if (etags & BIT(j))
-+ val |= ETAG_CTRL_TAG << (j * 2);
-+ else
-+ val |= ETAG_CTRL_UNTAG << (j * 2);
-+ }
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val);
-+
-+ /* write to vlan table */
-+ mt7530_vtcr(priv, 1, i);
-+ }
-+
-+ /* Port Default PVID */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ u32 val;
-+ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i));
-+ val &= ~0xfff;
-+ val |= priv->port_entries[i].pvid;
-+ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 speed, pmsr;
-+
-+ if (port < 0 || port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port));
-+
-+ link->link = pmsr & 1;
-+ link->duplex = (pmsr >> 1) & 1;
-+ speed = (pmsr >> 2) & 3;
-+
-+ switch (speed) {
-+ case 0:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case 1:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case 2:
-+ case 3: /* forced gige speed can be 2 or 3 */
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct switch_attr mt7530_global[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "VLAN mode (1:enabled)",
-+ .max = 1,
-+ .id = MT7530_ATTR_ENABLE_VLAN,
-+ .get = mt7530_get_vlan_enable,
-+ .set = mt7530_set_vlan_enable,
-+ },
-+};
-+
-+static const struct switch_attr mt7530_port[] = {
-+};
-+
-+static const struct switch_attr mt7530_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = mt7530_set_vid,
-+ .get = mt7530_get_vid,
-+ .max = 4094,
-+ },
-+};
-+
-+static const struct switch_dev_ops mt7530_ops = {
-+ .attr_global = {
-+ .attr = mt7530_global,
-+ .n_attr = ARRAY_SIZE(mt7530_global),
-+ },
-+ .attr_port = {
-+ .attr = mt7530_port,
-+ .n_attr = ARRAY_SIZE(mt7530_port),
-+ },
-+ .attr_vlan = {
-+ .attr = mt7530_vlan,
-+ .n_attr = ARRAY_SIZE(mt7530_vlan),
-+ },
-+ .get_vlan_ports = mt7530_get_vlan_ports,
-+ .set_vlan_ports = mt7530_set_vlan_ports,
-+ .get_port_pvid = mt7530_get_port_pvid,
-+ .set_port_pvid = mt7530_set_port_pvid,
-+ .get_port_link = mt7530_get_port_link,
-+ .apply_config = mt7530_apply_config,
-+ .reset_switch = mt7530_reset_switch,
-+};
-+
-+int
-+mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus)
-+{
-+ struct switch_dev *swdev;
-+ struct mt7530_priv *mt7530;
-+ struct mt7530_mapping *map;
-+ int ret;
-+
-+ if (bus && bus->phy_map[0x1f]->phy_id != 0x1beef)
-+ return 0;
-+
-+ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
-+ if (!mt7530)
-+ return -ENOMEM;
-+
-+ mt7530->base = base;
-+ mt7530->bus = bus;
-+ mt7530->global_vlan_enable = 1;
-+
-+ swdev = &mt7530->swdev;
-+ swdev->name = "mt7530";
-+ swdev->alias = "mt7530";
-+ swdev->cpu_port = MT7530_CPU_PORT;
-+ swdev->ports = MT7530_NUM_PORTS;
-+ swdev->vlans = MT7530_NUM_VLANS;
-+ swdev->ops = &mt7530_ops;
-+
-+ ret = register_switch(swdev, NULL);
-+ if (ret) {
-+ dev_err(dev, "failed to register mt7530\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "loaded mt7530 driver\n");
-+
-+ map = mt7530_find_mapping(dev->of_node);
-+ if (map)
-+ mt7530_apply_mapping(mt7530, map);
-+ mt7530_apply_config(swdev);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/mt7530.h
-@@ -0,0 +1,20 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _MT7530_H__
-+#define _MT7530_H__
-+
-+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
-@@ -0,0 +1,845 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/if_vlan.h>
-+#include <linux/reset.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "esw_rt3052.h"
-+#include "mdio.h"
-+
-+#define TX_TIMEOUT (2 * HZ)
-+#define MAX_RX_LENGTH 1536
-+#define DMA_DUMMY_DESC 0xffffffff
-+
-+static const u32 fe_reg_table_default[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
-+};
-+
-+static const u32 *fe_reg_table = fe_reg_table_default;
-+
-+static void __iomem *fe_base = 0;
-+
-+void fe_w32(u32 val, unsigned reg)
-+{
-+ __raw_writel(val, fe_base + reg);
-+}
-+
-+u32 fe_r32(unsigned reg)
-+{
-+ return __raw_readl(fe_base + reg);
-+}
-+
-+static inline void fe_reg_w32(u32 val, enum fe_reg reg)
-+{
-+ fe_w32(val, fe_reg_table[reg]);
-+}
-+
-+static inline u32 fe_reg_r32(enum fe_reg reg)
-+{
-+ return fe_r32(fe_reg_table[reg]);
-+}
-+
-+static inline void fe_int_disable(u32 mask)
-+{
-+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
-+ FE_REG_FE_INT_ENABLE);
-+ /* flush write */
-+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void fe_int_enable(u32 mask)
-+{
-+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
-+ FE_REG_FE_INT_ENABLE);
-+ /* flush write */
-+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
-+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ FE_GDMA1_MAC_ADRL);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static int fe_set_mac_address(struct net_device *dev, void *p)
-+{
-+ int ret = eth_mac_addr(dev, p);
-+
-+ if (!ret) {
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (priv->soc->set_mac)
-+ priv->soc->set_mac(priv, dev->dev_addr);
-+ else
-+ fe_hw_set_macaddr(priv, p);
-+ }
-+
-+ return ret;
-+}
-+
-+static struct sk_buff* fe_alloc_skb(struct fe_priv *priv)
-+{
-+ struct sk_buff *skb;
-+
-+ skb = netdev_alloc_skb(priv->netdev, MAX_RX_LENGTH + NET_IP_ALIGN);
-+ if (!skb)
-+ return NULL;
-+
-+ skb_reserve(skb, NET_IP_ALIGN);
-+
-+ return skb;
-+}
-+
-+static int fe_alloc_rx(struct fe_priv *priv)
-+{
-+ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
-+ int i;
-+
-+ priv->rx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
-+ &priv->rx_phys, GFP_ATOMIC);
-+ if (!priv->rx_dma)
-+ return -ENOMEM;
-+
-+ memset(priv->rx_dma, 0, size);
-+
-+ for (i = 0; i < NUM_DMA_DESC; i++) {
-+ priv->rx_skb[i] = fe_alloc_skb(priv);
-+ if (!priv->rx_skb[i])
-+ return -ENOMEM;
-+ }
-+
-+ for (i = 0; i < NUM_DMA_DESC; i++) {
-+ dma_addr_t dma_addr = dma_map_single(&priv->netdev->dev,
-+ priv->rx_skb[i]->data,
-+ MAX_RX_LENGTH,
-+ DMA_FROM_DEVICE);
-+ priv->rx_dma[i].rxd1 = (unsigned int) dma_addr;
-+
-+ if (priv->soc->rx_dma)
-+ priv->soc->rx_dma(priv, i, MAX_RX_LENGTH);
-+ else
-+ priv->rx_dma[i].rxd2 = RX_DMA_LSO;
-+ }
-+ wmb();
-+
-+ fe_reg_w32(priv->rx_phys, FE_REG_RX_BASE_PTR0);
-+ fe_reg_w32(NUM_DMA_DESC, FE_REG_RX_MAX_CNT0);
-+ fe_reg_w32((NUM_DMA_DESC - 1), FE_REG_RX_CALC_IDX0);
-+ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
-+
-+ return 0;
-+}
-+
-+static int fe_alloc_tx(struct fe_priv *priv)
-+{
-+ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
-+ int i;
-+
-+ priv->tx_free_idx = 0;
-+
-+ priv->tx_dma = dma_alloc_coherent(&priv->netdev->dev, size,
-+ &priv->tx_phys, GFP_ATOMIC);
-+ if (!priv->tx_dma)
-+ return -ENOMEM;
-+
-+ memset(priv->tx_dma, 0, size);
-+
-+ for (i = 0; i < NUM_DMA_DESC; i++) {
-+ if (priv->soc->tx_dma) {
-+ priv->soc->tx_dma(priv, i, NULL);
-+ continue;
-+ }
-+
-+ priv->tx_dma[i].txd2 = TX_DMA_LSO | TX_DMA_DONE;
-+ priv->tx_dma[i].txd4 = TX_DMA_QN(3) | TX_DMA_PN(1);
-+ }
-+
-+ fe_reg_w32(priv->tx_phys, FE_REG_TX_BASE_PTR0);
-+ fe_reg_w32(NUM_DMA_DESC, FE_REG_TX_MAX_CNT0);
-+ fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
-+ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
-+
-+ return 0;
-+}
-+
-+static void fe_free_dma(struct fe_priv *priv)
-+{
-+ int i;
-+
-+ for (i = 0; i < NUM_DMA_DESC; i++) {
-+ if (priv->rx_skb[i]) {
-+ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[i].rxd1,
-+ MAX_RX_LENGTH, DMA_FROM_DEVICE);
-+ dev_kfree_skb_any(priv->rx_skb[i]);
-+ priv->rx_skb[i] = NULL;
-+ }
-+
-+ if (priv->tx_skb[i]) {
-+ dev_kfree_skb_any(priv->tx_skb[i]);
-+ priv->tx_skb[i] = NULL;
-+ }
-+ }
-+
-+ if (priv->rx_dma) {
-+ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma);
-+ dma_free_coherent(&priv->netdev->dev, size, priv->rx_dma,
-+ priv->rx_phys);
-+ }
-+
-+ if (priv->tx_dma) {
-+ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma);
-+ dma_free_coherent(&priv->netdev->dev, size, priv->tx_dma,
-+ priv->tx_phys);
-+ }
-+
-+ netdev_reset_queue(priv->netdev);
-+}
-+
-+static void fe_start_tso(struct sk_buff *skb, struct net_device *dev, unsigned int nr_frags, int idx)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct skb_frag_struct *frag;
-+ int i;
-+
-+ for (i = 0; i < nr_frags; i++) {
-+ dma_addr_t mapped_addr;
-+
-+ frag = &skb_shinfo(skb)->frags[i];
-+ mapped_addr = skb_frag_dma_map(&dev->dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE);
-+ if (i % 2) {
-+ idx = (idx + 1) % NUM_DMA_DESC;
-+ priv->tx_dma[idx].txd1 = mapped_addr;
-+ if (i == nr_frags - 1)
-+ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(frag->size);
-+ else
-+ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(frag->size);
-+ } else {
-+ priv->tx_dma[idx].txd3 = mapped_addr;
-+ if (i == nr_frags - 1)
-+ priv->tx_dma[idx].txd2 |= TX_DMA_LS1 | TX_DMA_PLEN1(frag->size);
-+ else
-+ priv->tx_dma[idx].txd2 |= TX_DMA_PLEN1(frag->size);
-+ }
-+ }
-+}
-+
-+static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-+ struct fe_priv *priv = netdev_priv(dev);
-+ dma_addr_t mapped_addr;
-+ u32 tx_next, tx, tx_num = 1;
-+ int i;
-+
-+ if (priv->soc->min_pkt_len) {
-+ if (skb->len < priv->soc->min_pkt_len) {
-+ if (skb_padto(skb, priv->soc->min_pkt_len)) {
-+ printk(KERN_ERR
-+ "fe_eth: skb_padto failed\n");
-+ kfree_skb(skb);
-+ return 0;
-+ }
-+ skb_put(skb, priv->soc->min_pkt_len - skb->len);
-+ }
-+ }
-+
-+ dev->trans_start = jiffies;
-+ mapped_addr = dma_map_single(&priv->netdev->dev, skb->data,
-+ skb->len, DMA_TO_DEVICE);
-+
-+ spin_lock(&priv->page_lock);
-+
-+ tx = fe_reg_r32(FE_REG_TX_CTX_IDX0);
-+ if (priv->soc->tso && nr_frags)
-+ tx_num += nr_frags >> 1;
-+ tx_next = (tx + tx_num) % NUM_DMA_DESC;
-+ if ((priv->tx_skb[tx]) || (priv->tx_skb[tx_next]) ||
-+ !(priv->tx_dma[tx].txd2 & TX_DMA_DONE) ||
-+ !(priv->tx_dma[tx_next].txd2 & TX_DMA_DONE))
-+ {
-+ spin_unlock(&priv->page_lock);
-+ dev->stats.tx_dropped++;
-+ kfree_skb(skb);
-+
-+ return NETDEV_TX_OK;
-+ }
-+
-+ if (priv->soc->tso) {
-+ int t = tx_num;
-+
-+ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = skb;
-+ while (--t)
-+ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = (struct sk_buff *) DMA_DUMMY_DESC;
-+ } else {
-+ priv->tx_skb[tx] = skb;
-+ }
-+ priv->tx_dma[tx].txd1 = (unsigned int) mapped_addr;
-+ wmb();
-+
-+ priv->tx_dma[tx].txd4 &= ~0x80;
-+ if (priv->soc->tx_dma)
-+ priv->soc->tx_dma(priv, tx, skb);
-+ else
-+ priv->tx_dma[tx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len);
-+
-+ if (skb->ip_summed == CHECKSUM_PARTIAL)
-+ priv->tx_dma[tx].txd4 |= TX_DMA_CHKSUM;
-+ else
-+ priv->tx_dma[tx].txd4 &= ~TX_DMA_CHKSUM;
-+
-+ if (priv->soc->tso)
-+ fe_start_tso(skb, dev, nr_frags, tx);
-+
-+ if (priv->soc->tso && (skb_shinfo(skb)->gso_segs > 1)) {
-+ struct iphdr *iph = NULL;
-+ struct tcphdr *th = NULL;
-+ struct ipv6hdr *ip6h = NULL;
-+
-+ ip6h = (struct ipv6hdr *) skb_network_header(skb);
-+ iph = (struct iphdr *) skb_network_header(skb);
-+ if ((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+ priv->tx_dma[tx].txd4 |= BIT(28);
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ } else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+ priv->tx_dma[tx].txd4 |= BIT(28);
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ }
-+ }
-+
-+ for (i = 0; i < tx_num; i++)
-+ dma_cache_sync(NULL, &priv->tx_dma[tx + i], sizeof(struct fe_tx_dma), DMA_TO_DEVICE);
-+
-+ dev->stats.tx_packets++;
-+ dev->stats.tx_bytes += skb->len;
-+
-+ wmb();
-+ fe_reg_w32(tx_next, FE_REG_TX_CTX_IDX0);
-+ netdev_sent_queue(dev, skb->len);
-+
-+ spin_unlock(&priv->page_lock);
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static int fe_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
-+ int idx = fe_reg_r32(FE_REG_RX_CALC_IDX0);
-+ int complete = 0;
-+ int rx = 0;
-+
-+ while ((rx < budget) && !complete) {
-+ idx = (idx + 1) % NUM_DMA_DESC;
-+
-+ if (priv->rx_dma[idx].rxd2 & RX_DMA_DONE) {
-+ struct sk_buff *new_skb = fe_alloc_skb(priv);
-+
-+ if (new_skb) {
-+ int pktlen = RX_DMA_PLEN0(priv->rx_dma[idx].rxd2);
-+ dma_addr_t dma_addr;
-+
-+ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[idx].rxd1,
-+ MAX_RX_LENGTH, DMA_FROM_DEVICE);
-+
-+ skb_put(priv->rx_skb[idx], pktlen);
-+ priv->rx_skb[idx]->dev = priv->netdev;
-+ priv->rx_skb[idx]->protocol = eth_type_trans(priv->rx_skb[idx], priv->netdev);
-+ if (priv->rx_dma[idx].rxd4 & priv->soc->checksum_bit)
-+ priv->rx_skb[idx]->ip_summed = CHECKSUM_UNNECESSARY;
-+ else
-+ priv->rx_skb[idx]->ip_summed = CHECKSUM_NONE;
-+ priv->netdev->stats.rx_packets++;
-+ priv->netdev->stats.rx_bytes += pktlen;
-+
-+#ifdef CONFIG_INET_LRO
-+ if (priv->soc->get_skb_header && priv->rx_skb[idx]->ip_summed == CHECKSUM_UNNECESSARY)
-+ lro_receive_skb(&priv->lro_mgr, priv->rx_skb[idx], NULL);
-+ else
-+#endif
-+ netif_receive_skb(priv->rx_skb[idx]);
-+
-+ priv->rx_skb[idx] = new_skb;
-+
-+ dma_addr = dma_map_single(&priv->netdev->dev,
-+ new_skb->data,
-+ MAX_RX_LENGTH,
-+ DMA_FROM_DEVICE);
-+ priv->rx_dma[idx].rxd1 = (unsigned int) dma_addr;
-+ wmb();
-+ } else {
-+ priv->netdev->stats.rx_dropped++;
-+ }
-+
-+ if (priv->soc->rx_dma)
-+ priv->soc->rx_dma(priv, idx, MAX_RX_LENGTH);
-+ else
-+ priv->rx_dma[idx].rxd2 = RX_DMA_LSO;
-+ fe_reg_w32(idx, FE_REG_RX_CALC_IDX0);
-+
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+
-+#ifdef CONFIG_INET_LRO
-+ if (priv->soc->get_skb_header)
-+ lro_flush_all(&priv->lro_mgr);
-+#endif
-+ if (complete) {
-+ napi_complete(&priv->rx_napi);
-+ fe_int_enable(priv->soc->rx_dly_int);
-+ }
-+
-+ return rx;
-+}
-+
-+static void fe_tx_housekeeping(unsigned long ptr)
-+{
-+ struct net_device *dev = (struct net_device*)ptr;
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned int bytes_compl = 0;
-+ unsigned int pkts_compl = 0;
-+
-+ spin_lock(&priv->page_lock);
-+ while (1) {
-+ struct fe_tx_dma *txd;
-+
-+ txd = &priv->tx_dma[priv->tx_free_idx];
-+
-+ if (!(txd->txd2 & TX_DMA_DONE) || !(priv->tx_skb[priv->tx_free_idx]))
-+ break;
-+
-+ if (priv->tx_skb[priv->tx_free_idx] != (struct sk_buff *) DMA_DUMMY_DESC) {
-+ bytes_compl += priv->tx_skb[priv->tx_free_idx]->len;
-+ dev_kfree_skb_irq(priv->tx_skb[priv->tx_free_idx]);
-+ }
-+ pkts_compl++;
-+ priv->tx_skb[priv->tx_free_idx] = NULL;
-+ priv->tx_free_idx++;
-+ if (priv->tx_free_idx >= NUM_DMA_DESC)
-+ priv->tx_free_idx = 0;
-+ }
-+
-+ netdev_completed_queue(priv->netdev, pkts_compl, bytes_compl);
-+ spin_unlock(&priv->page_lock);
-+
-+ fe_int_enable(priv->soc->tx_dly_int);
-+}
-+
-+static void fe_tx_timeout(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ tasklet_schedule(&priv->tx_tasklet);
-+ priv->netdev->stats.tx_errors++;
-+ netdev_err(dev, "transmit timed out, waking up the queue\n");
-+ netif_wake_queue(dev);
-+}
-+
-+static irqreturn_t fe_handle_irq(int irq, void *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned int status;
-+ unsigned int mask;
-+
-+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
-+ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+
-+ if (!(status & mask))
-+ return IRQ_NONE;
-+
-+ if (status & priv->soc->rx_dly_int) {
-+ fe_int_disable(priv->soc->rx_dly_int);
-+ napi_schedule(&priv->rx_napi);
-+ }
-+
-+ if (status & priv->soc->tx_dly_int) {
-+ fe_int_disable(priv->soc->tx_dly_int);
-+ tasklet_schedule(&priv->tx_tasklet);
-+ }
-+
-+ fe_reg_w32(status, FE_REG_FE_INT_STATUS);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int fe_hw_init(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ int err;
-+
-+ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
-+ dev_name(priv->device), dev);
-+ if (err)
-+ return err;
-+
-+ err = fe_alloc_rx(priv);
-+ if (!err)
-+ err = fe_alloc_tx(priv);
-+ if (err)
-+ return err;
-+
-+ if (priv->soc->set_mac)
-+ priv->soc->set_mac(priv, dev->dev_addr);
-+ else
-+ fe_hw_set_macaddr(priv, dev->dev_addr);
-+
-+ fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG);
-+
-+ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
-+
-+ tasklet_init(&priv->tx_tasklet, fe_tx_housekeeping, (unsigned long)dev);
-+
-+ if (priv->soc->fwd_config) {
-+ priv->soc->fwd_config(priv);
-+ } else {
-+ unsigned long sysclk = priv->sysclk;
-+
-+ if (!sysclk) {
-+ netdev_err(dev, "unable to get clock\n");
-+ return -EINVAL;
-+ }
-+
-+ sysclk /= FE_US_CYC_CNT_DIVISOR;
-+ sysclk <<= FE_US_CYC_CNT_SHIFT;
-+
-+ fe_w32((fe_r32(FE_FE_GLO_CFG) &
-+ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk,
-+ FE_FE_GLO_CFG);
-+
-+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~0xffff, FE_GDMA1_FWD_CFG);
-+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN | FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
-+ FE_GDMA1_FWD_CFG);
-+ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN | FE_TCS_GEN_EN | FE_UCS_GEN_EN),
-+ FE_CDMA_CSG_CFG);
-+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
-+ }
-+
-+ fe_w32(1, FE_FE_RST_GL);
-+ fe_w32(0, FE_FE_RST_GL);
-+
-+ return 0;
-+}
-+
-+static int fe_open(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ napi_enable(&priv->rx_napi);
-+
-+ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
-+ val |= priv->soc->pdma_glo_cfg;
-+ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
-+
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+
-+ if (priv->phy)
-+ priv->phy->start(priv);
-+
-+ if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
-+ netif_carrier_on(dev);
-+
-+ netif_start_queue(dev);
-+ fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
-+
-+ return 0;
-+}
-+
-+static int fe_stop(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int);
-+
-+ netif_stop_queue(dev);
-+
-+ if (priv->phy)
-+ priv->phy->stop(priv);
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ napi_disable(&priv->rx_napi);
-+
-+ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
-+ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
-+ FE_REG_PDMA_GLO_CFG);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+
-+ return 0;
-+}
-+
-+static int __init fe_init(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct device_node *port;
-+ int err;
-+
-+ BUG_ON(!priv->soc->reset_fe);
-+ priv->soc->reset_fe();
-+
-+ if (priv->soc->switch_init)
-+ priv->soc->switch_init(priv);
-+
-+ net_srandom(jiffies);
-+ memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN);
-+ of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr);
-+
-+ err = fe_mdio_init(priv);
-+ if (err)
-+ return err;
-+
-+ if (priv->phy) {
-+ err = priv->phy->connect(priv);
-+ if (err)
-+ goto err_mdio_cleanup;
-+ }
-+
-+ if (priv->soc->port_init)
-+ for_each_child_of_node(priv->device->of_node, port)
-+ if (of_device_is_compatible(port, "ralink,eth-port") && of_device_is_available(port))
-+ priv->soc->port_init(priv, port);
-+
-+ err = fe_hw_init(dev);
-+ if (err)
-+ goto err_phy_disconnect;
-+
-+ if (priv->soc->switch_config)
-+ priv->soc->switch_config(priv);
-+
-+ return 0;
-+
-+err_phy_disconnect:
-+ if (priv->phy)
-+ priv->phy->disconnect(priv);
-+err_mdio_cleanup:
-+ fe_mdio_cleanup(priv);
-+
-+ return err;
-+}
-+
-+static void fe_uninit(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ tasklet_kill(&priv->tx_tasklet);
-+
-+ if (priv->phy)
-+ priv->phy->disconnect(priv);
-+ fe_mdio_cleanup(priv);
-+
-+ fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
-+ free_irq(dev->irq, dev);
-+
-+ fe_free_dma(priv);
-+}
-+
-+static const struct net_device_ops fe_netdev_ops = {
-+ .ndo_init = fe_init,
-+ .ndo_uninit = fe_uninit,
-+ .ndo_open = fe_open,
-+ .ndo_stop = fe_stop,
-+ .ndo_start_xmit = fe_start_xmit,
-+ .ndo_tx_timeout = fe_tx_timeout,
-+ .ndo_set_mac_address = fe_set_mac_address,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+};
-+
-+static int fe_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const struct of_device_id *match;
-+ struct fe_soc_data *soc = NULL;
-+ struct net_device *netdev;
-+ struct fe_priv *priv;
-+ struct clk *sysclk;
-+ int err;
-+
-+ device_reset(&pdev->dev);
-+
-+ match = of_match_device(of_fe_match, &pdev->dev);
-+ soc = (struct fe_soc_data *) match->data;
-+
-+ if (soc->init_data)
-+ soc->init_data(soc);
-+ if (soc->reg_table)
-+ fe_reg_table = soc->reg_table;
-+
-+ fe_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (!fe_base)
-+ return -ENOMEM;
-+
-+ netdev = alloc_etherdev(sizeof(struct fe_priv));
-+ if (!netdev) {
-+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ strcpy(netdev->name, "eth%d");
-+ netdev->netdev_ops = &fe_netdev_ops;
-+ netdev->base_addr = (unsigned long) fe_base;
-+ netdev->watchdog_timeo = TX_TIMEOUT;
-+ netdev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
-+
-+ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
-+ netdev->features |= NETIF_F_HW_VLAN_CTAG_TX;
-+
-+ if (soc->tso) {
-+ dev_info(&pdev->dev, "Enabling TSO\n");
-+ netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
-+ }
-+ netdev->hw_features = netdev->features;
-+
-+ netdev->irq = platform_get_irq(pdev, 0);
-+ if (netdev->irq < 0) {
-+ dev_err(&pdev->dev, "no IRQ resource found\n");
-+ kfree(netdev);
-+ return -ENXIO;
-+ }
-+
-+ priv = netdev_priv(netdev);
-+ memset(priv, 0, sizeof(struct fe_priv));
-+ spin_lock_init(&priv->page_lock);
-+
-+ sysclk = devm_clk_get(&pdev->dev, NULL);
-+ if (!IS_ERR(sysclk))
-+ priv->sysclk = clk_get_rate(sysclk);
-+
-+ priv->netdev = netdev;
-+ priv->device = &pdev->dev;
-+ priv->soc = soc;
-+
-+ err = register_netdev(netdev);
-+ if (err) {
-+ dev_err(&pdev->dev, "error bringing up device\n");
-+ kfree(netdev);
-+ return err;
-+ }
-+ netif_napi_add(netdev, &priv->rx_napi, fe_poll_rx, 32);
-+
-+#ifdef CONFIG_INET_LRO
-+ if (priv->soc->get_skb_header) {
-+ priv->lro_mgr.dev = netdev;
-+ memset(&priv->lro_mgr.stats, 0, sizeof(priv->lro_mgr.stats));
-+ priv->lro_mgr.features = LRO_F_NAPI;
-+ priv->lro_mgr.ip_summed = CHECKSUM_UNNECESSARY;
-+ priv->lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
-+ priv->lro_mgr.max_desc = ARRAY_SIZE(priv->lro_arr);
-+ priv->lro_mgr.max_aggr = 64;
-+ priv->lro_mgr.frag_align_pad = 0;
-+ priv->lro_mgr.lro_arr = priv->lro_arr;
-+ priv->lro_mgr.get_skb_header = priv->soc->get_skb_header;
-+ }
-+#endif
-+
-+ platform_set_drvdata(pdev, netdev);
-+
-+ netdev_info(netdev, "done loading\n");
-+
-+ return 0;
-+}
-+
-+static int fe_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ netif_stop_queue(dev);
-+ netif_napi_del(&priv->rx_napi);
-+
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver fe_driver = {
-+ .probe = fe_probe,
-+ .remove = fe_remove,
-+ .driver = {
-+ .name = "ralink_soc_eth",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_fe_match,
-+ },
-+};
-+
-+static int __init init_rtfe(void)
-+{
-+ int ret;
-+
-+ ret = rtesw_init();
-+ if (ret)
-+ return ret;
-+
-+ ret = platform_driver_register(&fe_driver);
-+ if (ret)
-+ rtesw_exit();
-+
-+ return ret;
-+}
-+
-+static void __exit exit_rtfe(void)
-+{
-+ platform_driver_unregister(&fe_driver);
-+ rtesw_exit();
-+}
-+
-+module_init(init_rtfe);
-+module_exit(exit_rtfe);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
-@@ -0,0 +1,384 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * based on Ralink SDK3.3
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef FE_ETH_H
-+#define FE_ETH_H
-+
-+#include <linux/mii.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/phy.h>
-+#include <linux/inet_lro.h>
-+
-+
-+enum fe_reg {
-+ FE_REG_PDMA_GLO_CFG = 0,
-+ FE_REG_PDMA_RST_CFG,
-+ FE_REG_DLY_INT_CFG,
-+ FE_REG_TX_BASE_PTR0,
-+ FE_REG_TX_MAX_CNT0,
-+ FE_REG_TX_CTX_IDX0,
-+ FE_REG_RX_BASE_PTR0,
-+ FE_REG_RX_MAX_CNT0,
-+ FE_REG_RX_CALC_IDX0,
-+ FE_REG_FE_INT_ENABLE,
-+ FE_REG_FE_INT_STATUS,
-+ FE_REG_FE_DMA_VID_BASE,
-+ FE_REG_COUNT
-+};
-+
-+#define NUM_DMA_DESC 0x100
-+
-+#define FE_DELAY_EN_INT 0x80
-+#define FE_DELAY_MAX_INT 0x04
-+#define FE_DELAY_MAX_TOUT 0x04
-+#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | FE_DELAY_MAX_TOUT)
-+#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
-+#define FE_PSE_FQFC_CFG_INIT 0x80504000
-+
-+/* interrupt bits */
-+#define FE_CNT_PPE_AF BIT(31)
-+#define FE_CNT_GDM_AF BIT(29)
-+#define FE_PSE_P2_FC BIT(26)
-+#define FE_PSE_BUF_DROP BIT(24)
-+#define FE_GDM_OTHER_DROP BIT(23)
-+#define FE_PSE_P1_FC BIT(22)
-+#define FE_PSE_P0_FC BIT(21)
-+#define FE_PSE_FQ_EMPTY BIT(20)
-+#define FE_GE1_STA_CHG BIT(18)
-+#define FE_TX_COHERENT BIT(17)
-+#define FE_RX_COHERENT BIT(16)
-+#define FE_TX_DONE_INT3 BIT(11)
-+#define FE_TX_DONE_INT2 BIT(10)
-+#define FE_TX_DONE_INT1 BIT(9)
-+#define FE_TX_DONE_INT0 BIT(8)
-+#define FE_RX_DONE_INT0 BIT(2)
-+#define FE_TX_DLY_INT BIT(1)
-+#define FE_RX_DLY_INT BIT(0)
-+
-+#define RT5350_RX_DLY_INT BIT(30)
-+#define RT5350_TX_DLY_INT BIT(28)
-+
-+/* registers */
-+#define FE_FE_OFFSET 0x0000
-+#define FE_GDMA_OFFSET 0x0020
-+#define FE_PSE_OFFSET 0x0040
-+#define FE_GDMA2_OFFSET 0x0060
-+#define FE_CDMA_OFFSET 0x0080
-+#define FE_DMA_VID0 0x00a8
-+#define FE_PDMA_OFFSET 0x0100
-+#define FE_PPE_OFFSET 0x0200
-+#define FE_CMTABLE_OFFSET 0x0400
-+#define FE_POLICYTABLE_OFFSET 0x1000
-+
-+#define RT5350_PDMA_OFFSET 0x0800
-+#define RT5350_SDM_OFFSET 0x0c00
-+
-+#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00)
-+#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04)
-+#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08)
-+#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C)
-+#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10)
-+#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14)
-+#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18)
-+#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C)
-+
-+#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00)
-+#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04)
-+#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08)
-+#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C)
-+#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10)
-+
-+#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00)
-+#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04)
-+#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08)
-+#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C)
-+#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10)
-+
-+#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00)
-+#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04)
-+#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08)
-+#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C)
-+
-+#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00)
-+#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04)
-+
-+#define MT7620A_GDMA_OFFSET 0x0600
-+#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00)
-+#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04)
-+#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08)
-+#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C)
-+#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10)
-+
-+#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
-+#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
-+#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
-+#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
-+#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
-+#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
-+#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
-+#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
-+#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
-+#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
-+#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
-+#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
-+#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
-+#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
-+#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
-+#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
-+#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
-+#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
-+#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
-+#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
-+#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
-+#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
-+#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
-+#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
-+#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
-+#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
-+#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
-+#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
-+#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
-+#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
-+
-+#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00)
-+#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04)
-+#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08)
-+#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C)
-+#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10)
-+#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14)
-+#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18)
-+#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C)
-+#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20)
-+#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24)
-+#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28)
-+#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C)
-+#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30)
-+#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34)
-+#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38)
-+#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C)
-+#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40)
-+#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44)
-+#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48)
-+#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C)
-+#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50)
-+#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54)
-+#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58)
-+#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C)
-+#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60)
-+#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64)
-+#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68)
-+#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C)
-+
-+#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00) //Switch DMA configuration
-+#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04) //Switch DMA Rx Ring
-+#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08) //Switch DMA Tx Ring
-+#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C) //Switch MAC address LSB
-+#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10) //Switch MAC Address MSB
-+#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count
-+#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count
-+#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count
-+#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count
-+#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count
-+
-+#define RT5350_SDM_ICS_EN BIT(16)
-+#define RT5350_SDM_TCS_EN BIT(17)
-+#define RT5350_SDM_UCS_EN BIT(18)
-+
-+
-+/* MDIO_CFG register bits */
-+#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29)
-+#define FE_MDIO_CFG_GP1_BP_EN BIT(16)
-+#define FE_MDIO_CFG_GP1_FRC_EN BIT(15)
-+#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13)
-+#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13)
-+#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
-+#define FE_MDIO_CFG_GP1_DUPLEX BIT(12)
-+#define FE_MDIO_CFG_GP1_FC_TX BIT(11)
-+#define FE_MDIO_CFG_GP1_FC_RX BIT(10)
-+#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9)
-+#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
-+#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5)
-+#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
-+#define FE_MDIO_CFG_TX_CLK_SKEW_0 0
-+#define FE_MDIO_CFG_TX_CLK_SKEW_200 1
-+#define FE_MDIO_CFG_TX_CLK_SKEW_400 2
-+#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3
-+
-+/* uni-cast port */
-+#define FE_GDM1_ICS_EN BIT(22)
-+#define FE_GDM1_TCS_EN BIT(21)
-+#define FE_GDM1_UCS_EN BIT(20)
-+#define FE_GDM1_JMB_EN BIT(19)
-+#define FE_GDM1_STRPCRC BIT(16)
-+#define FE_GDM1_UFRC_P_CPU (0 << 12)
-+#define FE_GDM1_UFRC_P_GDMA1 (1 << 12)
-+#define FE_GDM1_UFRC_P_PPE (6 << 12)
-+
-+/* checksums */
-+#define FE_ICS_GEN_EN BIT(2)
-+#define FE_UCS_GEN_EN BIT(1)
-+#define FE_TCS_GEN_EN BIT(0)
-+
-+/* dma ring */
-+#define FE_PST_DRX_IDX0 BIT(16)
-+#define FE_PST_DTX_IDX3 BIT(3)
-+#define FE_PST_DTX_IDX2 BIT(2)
-+#define FE_PST_DTX_IDX1 BIT(1)
-+#define FE_PST_DTX_IDX0 BIT(0)
-+
-+#define FE_TX_WB_DDONE BIT(6)
-+#define FE_RX_DMA_BUSY BIT(3)
-+#define FE_TX_DMA_BUSY BIT(1)
-+#define FE_RX_DMA_EN BIT(2)
-+#define FE_TX_DMA_EN BIT(0)
-+
-+#define FE_PDMA_SIZE_4DWORDS (0 << 4)
-+#define FE_PDMA_SIZE_8DWORDS (1 << 4)
-+#define FE_PDMA_SIZE_16DWORDS (2 << 4)
-+
-+#define FE_US_CYC_CNT_MASK 0xff
-+#define FE_US_CYC_CNT_SHIFT 0x8
-+#define FE_US_CYC_CNT_DIVISOR 1000000
-+
-+#define RX_DMA_PLEN0(_x) (((_x) >> 16) & 0x3fff)
-+#define RX_DMA_LSO BIT(30)
-+#define RX_DMA_DONE BIT(31)
-+#define RX_DMA_L4VALID BIT(30)
-+
-+struct fe_rx_dma {
-+ unsigned int rxd1;
-+ unsigned int rxd2;
-+ unsigned int rxd3;
-+ unsigned int rxd4;
-+} __packed __aligned(4);
-+
-+#define TX_DMA_PLEN0_MASK ((0x3fff) << 16)
-+#define TX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
-+#define TX_DMA_PLEN1(_x) ((_x) & 0x3fff)
-+#define TX_DMA_LS1 BIT(14)
-+#define TX_DMA_LSO BIT(30)
-+#define TX_DMA_DONE BIT(31)
-+#define TX_DMA_QN(_x) ((_x) << 16)
-+#define TX_DMA_PN(_x) ((_x) << 24)
-+#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
-+#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
-+#define TX_DMA_CHKSUM (0x7 << 29)
-+
-+struct fe_tx_dma {
-+ unsigned int txd1;
-+ unsigned int txd2;
-+ unsigned int txd3;
-+ unsigned int txd4;
-+} __packed __aligned(4);
-+
-+struct fe_priv;
-+
-+struct fe_phy {
-+ struct phy_device *phy[8];
-+ struct device_node *phy_node[8];
-+ const __be32 *phy_fixed[8];
-+ int duplex[8];
-+ int speed[8];
-+ int tx_fc[8];
-+ int rx_fc[8];
-+ spinlock_t lock;
-+
-+ int (*connect)(struct fe_priv *priv);
-+ void (*disconnect)(struct fe_priv *priv);
-+ void (*start)(struct fe_priv *priv);
-+ void (*stop)(struct fe_priv *priv);
-+};
-+
-+struct fe_soc_data
-+{
-+ unsigned char mac[6];
-+ const u32 *reg_table;
-+
-+ void (*init_data)(struct fe_soc_data *data);
-+ void (*reset_fe)(void);
-+ void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
-+ void (*fwd_config)(struct fe_priv *priv);
-+ void (*tx_dma)(struct fe_priv *priv, int idx, struct sk_buff *skb);
-+ void (*rx_dma)(struct fe_priv *priv, int idx, int len);
-+ int (*switch_init)(struct fe_priv *priv);
-+ int (*switch_config)(struct fe_priv *priv);
-+ void (*port_init)(struct fe_priv *priv, struct device_node *port);
-+ int (*has_carrier)(struct fe_priv *priv);
-+ int (*mdio_init)(struct fe_priv *priv);
-+ void (*mdio_cleanup)(struct fe_priv *priv);
-+ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
-+ void (*mdio_adjust_link)(struct fe_priv *priv, int port);
-+ int (*get_skb_header)(struct sk_buff *skb, void **iphdr, void **tcph, u64 *hdr_flags, void *priv);
-+
-+ void *swpriv;
-+ u32 pdma_glo_cfg;
-+ u32 rx_dly_int;
-+ u32 tx_dly_int;
-+ u32 checksum_bit;
-+ u32 tso;
-+
-+ int min_pkt_len;
-+};
-+
-+struct fe_priv
-+{
-+ spinlock_t page_lock;
-+
-+ struct fe_soc_data *soc;
-+ struct net_device *netdev;
-+ struct device *device;
-+ unsigned long sysclk;
-+
-+ struct fe_rx_dma *rx_dma;
-+ struct napi_struct rx_napi;
-+ struct sk_buff *rx_skb[NUM_DMA_DESC];
-+ dma_addr_t rx_phys;
-+
-+ struct fe_tx_dma *tx_dma;
-+ struct tasklet_struct tx_tasklet;
-+ struct sk_buff *tx_skb[NUM_DMA_DESC];
-+ dma_addr_t tx_phys;
-+ unsigned int tx_free_idx;
-+
-+ struct fe_phy *phy;
-+ struct mii_bus *mii_bus;
-+ int mii_irq[PHY_MAX_ADDR];
-+
-+ int link[8];
-+
-+ struct net_lro_mgr lro_mgr;
-+ struct net_lro_desc lro_arr[8];
-+};
-+
-+extern const struct of_device_id of_fe_match[];
-+
-+void fe_w32(u32 val, unsigned reg);
-+u32 fe_r32(unsigned reg);
-+
-+#endif /* FE_ETH_H */
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/soc_mt7620.c
-@@ -0,0 +1,172 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/if_vlan.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include <mt7620.h>
-+#include "ralink_soc_eth.h"
-+#include "gsw_mt7620a.h"
-+
-+#define MT7620A_CDMA_CSG_CFG 0x400
-+#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
-+#define MT7620A_DMA_2B_OFFSET BIT(31)
-+#define MT7620A_RESET_FE BIT(21)
-+#define MT7620A_RESET_ESW BIT(23)
-+#define MT7620_L4_VALID BIT(23)
-+
-+#define SYSC_REG_RESET_CTRL 0x34
-+#define MAX_RX_LENGTH 1536
-+
-+#define CDMA_ICS_EN BIT(2)
-+#define CDMA_UCS_EN BIT(1)
-+#define CDMA_TCS_EN BIT(0)
-+
-+#define GDMA_ICS_EN BIT(22)
-+#define GDMA_TCS_EN BIT(21)
-+#define GDMA_UCS_EN BIT(20)
-+
-+static const u32 rt5350_reg_table[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
-+};
-+
-+static void mt7620_fe_reset(void)
-+{
-+ rt_sysc_w32(MT7620A_RESET_FE | MT7620A_RESET_ESW, SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
-+}
-+
-+static void mt7620_fwd_config(struct fe_priv *priv)
-+{
-+ int i;
-+
-+ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc. */
-+ for (i = 0; i < 16; i += 2)
-+ fe_w32(((i + 1) << 16) + i, MT7620_DMA_VID + (i * 2));
-+
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN | GDMA_TCS_EN | GDMA_UCS_EN), MT7620A_GDMA1_FWD_CFG);
-+ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN | CDMA_UCS_EN | CDMA_TCS_EN), MT7620A_CDMA_CSG_CFG);
-+}
-+
-+static void mt7620_tx_dma(struct fe_priv *priv, int idx, struct sk_buff *skb)
-+{
-+ unsigned int nr_frags = 0;
-+ unsigned int len = 0;
-+
-+ if (skb) {
-+ nr_frags = skb_shinfo(skb)->nr_frags;
-+ len = skb->len - skb->data_len;
-+ }
-+
-+ if (!skb)
-+ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_DONE;
-+ else if (!nr_frags)
-+ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(len);
-+ else
-+ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(len);
-+
-+ if(skb && vlan_tx_tag_present(skb))
-+ priv->tx_dma[idx].txd4 = 0x80 | (vlan_tx_tag_get(skb) >> 13) << 4 | (vlan_tx_tag_get(skb) & 0xF);
-+ else
-+ priv->tx_dma[idx].txd4 = 0;
-+}
-+
-+static void mt7620_rx_dma(struct fe_priv *priv, int idx, int len)
-+{
-+ priv->rx_dma[idx].rxd2 = RX_DMA_PLEN0(len);
-+}
-+
-+#ifdef CONFIG_INET_LRO
-+static int
-+mt7620_get_skb_header(struct sk_buff *skb, void **iphdr, void **tcph,
-+ u64 *hdr_flags, void *_priv)
-+{
-+ struct iphdr *iph = NULL;
-+ int vhdr_len = 0;
-+
-+ /*
-+ * Make sure that this packet is Ethernet II, is not VLAN
-+ * tagged, is IPv4, has a valid IP header, and is TCP.
-+ */
-+ if (skb->protocol == 0x0081)
-+ vhdr_len = VLAN_HLEN;
-+
-+ iph = (struct iphdr *)(skb->data + vhdr_len);
-+ if(iph->protocol != IPPROTO_TCP)
-+ return -1;
-+
-+ *iphdr = iph;
-+ *tcph = skb->data + (iph->ihl << 2) + vhdr_len;
-+ *hdr_flags = LRO_IPV4 | LRO_TCP;
-+
-+ return 0;
-+}
-+#endif
-+
-+static void mt7620_init_data(struct fe_soc_data *data)
-+{
-+ if (mt7620_get_eco() >= 5)
-+ data->tso = 1;
-+}
-+
-+static struct fe_soc_data mt7620_data = {
-+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+ .init_data = mt7620_init_data,
-+ .reset_fe = mt7620_fe_reset,
-+ .set_mac = mt7620_set_mac,
-+ .fwd_config = mt7620_fwd_config,
-+ .tx_dma = mt7620_tx_dma,
-+ .rx_dma = mt7620_rx_dma,
-+ .switch_init = mt7620_gsw_probe,
-+ .switch_config = mt7620_gsw_config,
-+ .port_init = mt7620_port_init,
-+ .min_pkt_len = 0,
-+ .reg_table = rt5350_reg_table,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET,
-+ .rx_dly_int = RT5350_RX_DLY_INT,
-+ .tx_dly_int = RT5350_TX_DLY_INT,
-+ .checksum_bit = MT7620_L4_VALID,
-+ .has_carrier = mt7620a_has_carrier,
-+ .mdio_read = mt7620_mdio_read,
-+ .mdio_write = mt7620_mdio_write,
-+ .mdio_adjust_link = mt7620_mdio_link_adjust,
-+#ifdef CONFIG_INET_LRO
-+ .get_skb_header = mt7620_get_skb_header,
-+#endif
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,mt7620a-eth", .data = &mt7620_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/soc_rt2880.c
-@@ -0,0 +1,52 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "mdio_rt2880.h"
-+
-+#define SYSC_REG_RESET_CTRL 0x034
-+#define RT2880_RESET_FE BIT(18)
-+
-+void rt2880_fe_reset(void)
-+{
-+ rt_sysc_w32(RT2880_RESET_FE, SYSC_REG_RESET_CTRL);
-+}
-+
-+struct fe_soc_data rt2880_data = {
-+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+ .reset_fe = rt2880_fe_reset,
-+ .min_pkt_len = 64,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_dly_int = FE_RX_DLY_INT,
-+ .tx_dly_int = FE_TX_DLY_INT,
-+ .mdio_read = rt2880_mdio_read,
-+ .mdio_write = rt2880_mdio_write,
-+ .mdio_adjust_link = rt2880_mdio_link_adjust,
-+ .port_init = rt2880_port_init,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/soc_rt305x.c
-@@ -0,0 +1,113 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+
-+#define RT305X_RESET_FE BIT(21)
-+#define RT305X_RESET_ESW BIT(23)
-+#define SYSC_REG_RESET_CTRL 0x034
-+
-+static const u32 rt5350_reg_table[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+ [FE_REG_FE_DMA_VID_BASE] = 0,
-+};
-+
-+static void rt305x_fe_reset(void)
-+{
-+ rt_sysc_w32(RT305X_RESET_FE, SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
-+}
-+
-+static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
-+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ RT5350_SDM_MAC_ADRL);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static void rt5350_fwd_config(struct fe_priv *priv)
-+{
-+ unsigned long sysclk = priv->sysclk;
-+
-+ if (sysclk) {
-+ sysclk /= FE_US_CYC_CNT_DIVISOR;
-+ sysclk <<= FE_US_CYC_CNT_SHIFT;
-+
-+ fe_w32((fe_r32(FE_FE_GLO_CFG) &
-+ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk,
-+ FE_FE_GLO_CFG);
-+ }
-+
-+ fe_w32(fe_r32(RT5350_SDM_CFG) & ~0xffff, RT5350_SDM_CFG);
-+ fe_w32(fe_r32(RT5350_SDM_CFG) | RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN,
-+ RT5350_SDM_CFG);
-+}
-+
-+static void rt5350_fe_reset(void)
-+{
-+ rt_sysc_w32(RT305X_RESET_FE | RT305X_RESET_ESW, SYSC_REG_RESET_CTRL);
-+ rt_sysc_w32(0, SYSC_REG_RESET_CTRL);
-+}
-+
-+static struct fe_soc_data rt3050_data = {
-+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+ .reset_fe = rt305x_fe_reset,
-+ .min_pkt_len = 64,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_dly_int = FE_RX_DLY_INT,
-+ .tx_dly_int = FE_TX_DLY_INT,
-+};
-+
-+static struct fe_soc_data rt5350_data = {
-+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+ .reg_table = rt5350_reg_table,
-+ .reset_fe = rt5350_fe_reset,
-+ .set_mac = rt5350_set_mac,
-+ .fwd_config = rt5350_fwd_config,
-+ .min_pkt_len = 64,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_dly_int = RT5350_RX_DLY_INT,
-+ .tx_dly_int = RT5350_TX_DLY_INT,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
-+ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
---- /dev/null
-+++ b/drivers/net/ethernet/ralink/soc_rt3883.c
-@@ -0,0 +1,60 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "ralink_soc_eth.h"
-+#include "mdio_rt2880.h"
-+
-+#define RT3883_SYSC_REG_RSTCTRL 0x34
-+#define RT3883_RSTCTRL_FE BIT(21)
-+
-+static void rt3883_fe_reset(void)
-+{
-+ u32 t;
-+
-+ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
-+ t |= RT3883_RSTCTRL_FE;
-+ rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL);
-+
-+ t &= ~RT3883_RSTCTRL_FE;
-+ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
-+}
-+
-+static struct fe_soc_data rt3883_data = {
-+ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 },
-+ .reset_fe = rt3883_fe_reset,
-+ .min_pkt_len = 64,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS,
-+ .rx_dly_int = FE_RX_DLY_INT,
-+ .tx_dly_int = FE_TX_DLY_INT,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .mdio_read = rt2880_mdio_read,
-+ .mdio_write = rt2880_mdio_write,
-+ .mdio_adjust_link = rt2880_mdio_link_adjust,
-+ .port_init = rt2880_port_init,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
-+
diff --git a/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch
deleted file mode 100644
index d71666e..0000000
--- a/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch
+++ /dev/null
@@ -1,230 +0,0 @@
-From 71e09658d3544143e46ae76e76da8a322cd73e1d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:31:19 +0200
-Subject: [PATCH 119/133] USB: phy: add ralink SoC driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/phy/Kconfig | 8 ++
- drivers/usb/phy/Makefile | 1 +
- drivers/usb/phy/ralink-phy.c | 191 ++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 200 insertions(+)
- create mode 100644 drivers/usb/phy/ralink-phy.c
-
---- a/drivers/usb/phy/Kconfig
-+++ b/drivers/usb/phy/Kconfig
-@@ -210,4 +210,12 @@ config USB_ULPI_VIEWPORT
- Provides read/write operations to the ULPI phy register set for
- controllers with a viewport register (e.g. Chipidea/ARC controllers).
-
-+config RALINK_USBPHY
-+ bool "Ralink USB PHY controller Driver"
-+ depends on MIPS && RALINK
-+ select USB_OTG_UTILS
-+ help
-+ Enable this to support ralink USB phy controller for ralink
-+ SoCs.
-+
- endif # USB_PHY
---- a/drivers/usb/phy/Makefile
-+++ b/drivers/usb/phy/Makefile
-@@ -31,3 +31,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-us
- obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
- obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
- obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
-+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
---- /dev/null
-+++ b/drivers/usb/phy/ralink-phy.c
-@@ -0,0 +1,192 @@
-+/*
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * based on: Renesas R-Car USB phy driver
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/usb/otg.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define RT_SYSC_REG_SYSCFG1 0x014
-+#define RT_SYSC_REG_CLKCFG1 0x030
-+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
-+
-+#define RT_RSTCTRL_UDEV BIT(25)
-+#define RT_RSTCTRL_UHST BIT(22)
-+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
-+
-+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
-+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
-+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
-+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
-+
-+#define USB_PHY_UTMI_8B60M BIT(1)
-+#define UDEV_WAKEUP BIT(0)
-+
-+static atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-+static struct reset_control *rstdev;
-+static struct reset_control *rsthost;
-+static u32 phy_clk;
-+
-+static void usb_phy_enable(int state)
-+{
-+ if (state)
-+ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1);
-+ else
-+ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1);
-+ mdelay(100);
-+}
-+
-+static int usb_power_on(struct usb_phy *phy)
-+{
-+ if (atomic_inc_return(&usb_pwr_ref) == 1) {
-+ u32 t;
-+
-+ usb_phy_enable(1);
-+
-+// reset_control_assert(rstdev);
-+// reset_control_assert(rsthost);
-+
-+ if (OTG_STATE_B_HOST) {
-+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
-+ reset_control_deassert(rsthost);
-+ } else {
-+ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1);
-+ reset_control_deassert(rstdev);
-+ }
-+ mdelay(100);
-+
-+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
-+ dev_info(phy->dev, "remote usb device wakeup %s\n",
-+ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled"));
-+ if (t & USB_PHY_UTMI_8B60M)
-+ dev_info(phy->dev, "UTMI 8bit 60MHz\n");
-+ else
-+ dev_info(phy->dev, "UTMI 16bit 30MHz\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static void usb_power_off(struct usb_phy *phy)
-+{
-+ if (atomic_dec_return(&usb_pwr_ref) == 0) {
-+ usb_phy_enable(0);
-+ reset_control_assert(rstdev);
-+ reset_control_assert(rsthost);
-+ }
-+}
-+
-+static int usb_set_host(struct usb_otg *otg, struct usb_bus *host)
-+{
-+ otg->gadget = NULL;
-+ otg->host = host;
-+
-+ return 0;
-+}
-+
-+static int usb_set_peripheral(struct usb_otg *otg,
-+ struct usb_gadget *gadget)
-+{
-+ otg->host = NULL;
-+ otg->gadget = gadget;
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ralink_usbphy_dt_match[] = {
-+ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) },
-+ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN | MT7620_CLKCFG1_UPHY0_CLK_EN) },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match);
-+
-+static int usb_phy_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct device *dev = &pdev->dev;
-+ struct usb_otg *otg;
-+ struct usb_phy *phy;
-+ int ret;
-+
-+ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev);
-+ phy_clk = (int) match->data;
-+
-+ rsthost = devm_reset_control_get(&pdev->dev, "host");
-+ if (IS_ERR(rsthost))
-+ return PTR_ERR(rsthost);
-+
-+ rstdev = devm_reset_control_get(&pdev->dev, "device");
-+ if (IS_ERR(rstdev))
-+ return PTR_ERR(rstdev);
-+
-+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy) {
-+ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n");
-+ return -ENOMEM;
-+ }
-+
-+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
-+ if (!otg) {
-+ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
-+ return -ENOMEM;
-+ }
-+
-+ phy->dev = dev;
-+ phy->label = dev_name(dev);
-+ phy->init = usb_power_on;
-+ phy->shutdown = usb_power_off;
-+ otg->set_host = usb_set_host;
-+ otg->set_peripheral = usb_set_peripheral;
-+ otg->phy = phy;
-+ phy->otg = otg;
-+ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2);
-+
-+ if (ret < 0) {
-+ dev_err(dev, "usb phy addition error\n");
-+ return ret;
-+ }
-+
-+ platform_set_drvdata(pdev, phy);
-+
-+ dev_info(&pdev->dev, "loaded\n");
-+
-+ return ret;
-+}
-+
-+static int usb_phy_remove(struct platform_device *pdev)
-+{
-+ struct usb_phy *phy = platform_get_drvdata(pdev);
-+
-+ usb_remove_phy(phy);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver usb_phy_driver = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "rt3xxx-usbphy",
-+ .of_match_table = of_match_ptr(ralink_usbphy_dt_match),
-+ },
-+ .probe = usb_phy_probe,
-+ .remove = usb_phy_remove,
-+};
-+
-+module_platform_driver(usb_phy_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("Ralink USB phy");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
diff --git a/target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch
deleted file mode 100644
index 6d18894..0000000
--- a/target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 08d438b69f3023f16b044b07eebee6b9c2302f60 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:34:53 +0200
-Subject: [PATCH 120/133] USB: add OHCI/EHCI OF binding
-
-based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/Makefile | 3 ++-
- drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++----
- drivers/usb/host/ohci-platform.c | 37 ++++++++++++++++++++++++++++++++-----
- 3 files changed, 51 insertions(+), 10 deletions(-)
-
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -10,6 +10,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
-
- obj-$(CONFIG_USB_MON) += mon/
-
-+obj-$(CONFIG_USB_PHY) += phy/
-+
- obj-$(CONFIG_PCI) += host/
- obj-$(CONFIG_USB_EHCI_HCD) += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
-@@ -44,7 +46,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/
- obj-$(CONFIG_USB_SERIAL) += serial/
-
- obj-$(CONFIG_USB) += misc/
--obj-$(CONFIG_USB_PHY) += phy/
- obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
-
- obj-$(CONFIG_USB_ATM) += atm/
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -29,6 +29,8 @@
- #include <linux/usb.h>
- #include <linux/usb/hcd.h>
- #include <linux/usb/ehci_pdriver.h>
-+#include <linux/usb/phy.h>
-+#include <linux/usb/otg.h>
-
- #include "ehci.h"
-
-@@ -118,6 +120,15 @@ static int ehci_platform_probe(struct pl
- hcd->rsrc_start = res_mem->start;
- hcd->rsrc_len = resource_size(res_mem);
-
-+#ifdef CONFIG_USB_PHY
-+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
-+ if (!IS_ERR_OR_NULL(hcd->phy)) {
-+ otg_set_host(hcd->phy->otg,
-+ &hcd->self);
-+ usb_phy_init(hcd->phy);
-+ }
-+#endif
-+
- hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
- if (IS_ERR(hcd->regs)) {
- err = PTR_ERR(hcd->regs);
-@@ -155,6 +166,9 @@ static int ehci_platform_remove(struct p
- if (pdata == &ehci_platform_defaults)
- dev->dev.platform_data = NULL;
-
-+ if (pdata == &ehci_platform_defaults)
-+ dev->dev.platform_data = NULL;
-+
- return 0;
- }
-
-@@ -199,9 +213,8 @@ static int ehci_platform_resume(struct d
- #define ehci_platform_resume NULL
- #endif /* CONFIG_PM */
-
--static const struct of_device_id vt8500_ehci_ids[] = {
-- { .compatible = "via,vt8500-ehci", },
-- { .compatible = "wm,prizm-ehci", },
-+static const struct of_device_id ralink_ehci_ids[] = {
-+ { .compatible = "ralink,rt3xxx-ehci", },
- {}
- };
-
-@@ -225,7 +238,7 @@ static struct platform_driver ehci_platf
- .owner = THIS_MODULE,
- .name = "ehci-platform",
- .pm = &ehci_platform_pm_ops,
-- .of_match_table = of_match_ptr(vt8500_ehci_ids),
-+ .of_match_table = of_match_ptr(ralink_ehci_ids),
- }
- };
-
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -16,6 +16,10 @@
- #include <linux/err.h>
- #include <linux/platform_device.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/of.h>
-+
-+static struct usb_ohci_pdata ohci_platform_defaults;
-
- static int ohci_platform_reset(struct usb_hcd *hcd)
- {
-@@ -88,14 +92,22 @@ static int ohci_platform_probe(struct pl
- {
- struct usb_hcd *hcd;
- struct resource *res_mem;
-- struct usb_ohci_pdata *pdata = dev->dev.platform_data;
-+ struct usb_ohci_pdata *pdata;
- int irq;
- int err = -ENOMEM;
-
-- if (!pdata) {
-- WARN_ON(1);
-- return -ENODEV;
-- }
-+ /*
-+ * use reasonable defaults so platforms don't have to provide these.
-+ * with DT probing on ARM, none of these are set.
-+ */
-+ if (!dev->dev.platform_data)
-+ dev->dev.platform_data = &ohci_platform_defaults;
-+ if (!dev->dev.dma_mask)
-+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
-+ if (!dev->dev.coherent_dma_mask)
-+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-+
-+ pdata = dev->dev.platform_data;
-
- if (usb_disabled())
- return -ENODEV;
-@@ -128,6 +140,12 @@ static int ohci_platform_probe(struct pl
- hcd->rsrc_start = res_mem->start;
- hcd->rsrc_len = resource_size(res_mem);
-
-+#ifdef CONFIG_USB_PHY
-+ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
-+ if (!IS_ERR_OR_NULL(hcd->phy))
-+ usb_phy_init(hcd->phy);
-+#endif
-+
- hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
- if (IS_ERR(hcd->regs)) {
- err = PTR_ERR(hcd->regs);
-@@ -162,6 +180,9 @@ static int ohci_platform_remove(struct p
- if (pdata->power_off)
- pdata->power_off(dev);
-
-+ if (pdata == &ohci_platform_defaults)
-+ dev->dev.platform_data = NULL;
-+
- return 0;
- }
-
-@@ -201,6 +222,11 @@ static int ohci_platform_resume(struct d
- #define ohci_platform_resume NULL
- #endif /* CONFIG_PM */
-
-+static const struct of_device_id ralink_ohci_ids[] = {
-+ { .compatible = "ralink,rt3xxx-ohci", },
-+ {}
-+};
-+
- static const struct platform_device_id ohci_platform_table[] = {
- { "ohci-platform", 0 },
- { }
-@@ -221,5 +247,6 @@ static struct platform_driver ohci_platf
- .owner = THIS_MODULE,
- .name = "ohci-platform",
- .pm = &ohci_platform_pm_ops,
-+ .of_match_table = of_match_ptr(ralink_ohci_ids),
- }
- };
diff --git a/target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch b/target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch
deleted file mode 100644
index 8267452..0000000
--- a/target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch
+++ /dev/null
@@ -1,24517 +0,0 @@
-From b74db0e9bae6bbe14e9f725db855621db22e9984 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 15 Mar 2013 20:58:18 +0100
-Subject: [PATCH 121/133] USB: adds dwc_otg
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/Kconfig | 2 +
- drivers/usb/Makefile | 1 +
- drivers/usb/dwc_otg/Kconfig | 24 +
- drivers/usb/dwc_otg/Makefile | 25 +
- drivers/usb/dwc_otg/dummy_audio.c | 1575 +++++++++++++
- drivers/usb/dwc_otg/dwc_otg_attr.c | 966 ++++++++
- drivers/usb/dwc_otg/dwc_otg_attr.h | 67 +
- drivers/usb/dwc_otg/dwc_otg_cil.c | 3692 ++++++++++++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_cil.h | 1098 +++++++++
- drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 750 ++++++
- drivers/usb/dwc_otg/dwc_otg_driver.c | 1273 ++++++++++
- drivers/usb/dwc_otg/dwc_otg_driver.h | 83 +
- drivers/usb/dwc_otg/dwc_otg_hcd.c | 2852 +++++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_hcd.h | 668 ++++++
- drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 1873 +++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_hcd_queue.c | 684 ++++++
- drivers/usb/dwc_otg/dwc_otg_pcd.c | 2523 ++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_pcd.h | 248 ++
- drivers/usb/dwc_otg/dwc_otg_pcd_intr.c | 3654 +++++++++++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_regs.h | 2075 +++++++++++++++++
- drivers/usb/dwc_otg/linux/dwc_otg_plat.h | 260 +++
- 21 files changed, 24393 insertions(+)
- create mode 100644 drivers/usb/dwc_otg/Kconfig
- create mode 100644 drivers/usb/dwc_otg/Makefile
- create mode 100644 drivers/usb/dwc_otg/dummy_audio.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
- create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h
-
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -126,6 +126,8 @@ if USB
-
- source "drivers/usb/core/Kconfig"
-
-+source "drivers/usb/dwc_otg/Kconfig"
-+
- source "drivers/usb/mon/Kconfig"
-
- source "drivers/usb/wusbcore/Kconfig"
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -7,6 +7,7 @@
- obj-$(CONFIG_USB) += core/
-
- obj-$(CONFIG_USB_DWC3) += dwc3/
-+obj-$(CONFIG_DWC_OTG) += dwc_otg/
-
- obj-$(CONFIG_USB_MON) += mon/
-
---- /dev/null
-+++ b/drivers/usb/dwc_otg/Kconfig
-@@ -0,0 +1,24 @@
-+config DWC_OTG
-+ tristate "Ralink RT305X DWC_OTG support"
-+ depends on SOC_RT305X
-+ ---help---
-+ This driver supports Ralink DWC_OTG
-+
-+choice
-+ prompt "USB Operation Mode"
-+ depends on DWC_OTG
-+ default DWC_OTG_HOST_ONLY
-+
-+config DWC_OTG_HOST_ONLY
-+ bool "HOST ONLY MODE"
-+ depends on DWC_OTG
-+
-+config DWC_OTG_DEVICE_ONLY
-+ bool "DEVICE ONLY MODE"
-+ depends on DWC_OTG
-+
-+endchoice
-+
-+config DWC_OTG_DEBUG
-+ bool "Enable debug mode"
-+ depends on DWC_OTG
---- /dev/null
-+++ b/drivers/usb/dwc_otg/Makefile
-@@ -0,0 +1,25 @@
-+#
-+# Makefile for DWC_otg Highspeed USB controller driver
-+#
-+
-+ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
-+EXTRA_CFLAGS += -DDEBUG
-+endif
-+
-+# Use one of the following flags to compile the software in host-only or
-+# device-only mode.
-+ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
-+EXTRA_CFLAGS += -DDWC_HOST_ONLY
-+EXTRA_CFLAGS += -DDWC_EN_ISOC
-+endif
-+
-+ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
-+EXTRA_CFLAGS += -DDWC_DEVICE_ONLY
-+endif
-+
-+obj-$(CONFIG_DWC_OTG) := dwc_otg.o
-+
-+dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o
-+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-+dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
-+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dummy_audio.c
-@@ -0,0 +1,1575 @@
-+/*
-+ * zero.c -- Gadget Zero, for USB development
-+ *
-+ * Copyright (C) 2003-2004 David Brownell
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions, and the following disclaimer,
-+ * without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ * to endorse or promote products derived from this software without
-+ * specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*
-+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
-+ * can write a hardware-agnostic gadget driver running inside a USB device.
-+ *
-+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
-+ * affect most of the driver.
-+ *
-+ * Use it with the Linux host/master side "usbtest" driver to get a basic
-+ * functional test of your device-side usb stack, or with "usb-skeleton".
-+ *
-+ * It supports two similar configurations. One sinks whatever the usb host
-+ * writes, and in return sources zeroes. The other loops whatever the host
-+ * writes back, so the host can read it. Module options include:
-+ *
-+ * buflen=N default N=4096, buffer size used
-+ * qlen=N default N=32, how many buffers in the loopback queue
-+ * loopdefault default false, list loopback config first
-+ *
-+ * Many drivers will only have one configuration, letting them be much
-+ * simpler if they also don't support high speed operation (like this
-+ * driver does).
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/uts.h>
-+#include <linux/version.h>
-+#include <linux/device.h>
-+#include <linux/moduleparam.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/unaligned.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#include <linux/usb_gadget.h>
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+
-+
-+/**
-+ * usb_gadget_get_string - fill out a string descriptor
-+ * @table: of c strings encoded using UTF-8
-+ * @id: string id, from low byte of wValue in get string descriptor
-+ * @buf: at least 256 bytes
-+ *
-+ * Finds the UTF-8 string matching the ID, and converts it into a
-+ * string descriptor in utf16-le.
-+ * Returns length of descriptor (always even) or negative errno
-+ *
-+ * If your driver needs stings in multiple languages, you'll probably
-+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
-+ * using this routine after choosing which set of UTF-8 strings to use.
-+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
-+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
-+ * characters (which are also widely used in C strings).
-+ */
-+int
-+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
-+{
-+ struct usb_string *s;
-+ int len;
-+
-+ /* descriptor 0 has the language id */
-+ if (id == 0) {
-+ buf [0] = 4;
-+ buf [1] = USB_DT_STRING;
-+ buf [2] = (u8) table->language;
-+ buf [3] = (u8) (table->language >> 8);
-+ return 4;
-+ }
-+ for (s = table->strings; s && s->s; s++)
-+ if (s->id == id)
-+ break;
-+
-+ /* unrecognized: stall. */
-+ if (!s || !s->s)
-+ return -EINVAL;
-+
-+ /* string descriptors have length, tag, then UTF16-LE text */
-+ len = min ((size_t) 126, strlen (s->s));
-+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */
-+ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
-+ if (len < 0)
-+ return -EINVAL;
-+ buf [0] = (len + 1) * 2;
-+ buf [1] = USB_DT_STRING;
-+ return buf [0];
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/**
-+ * usb_descriptor_fillbuf - fill buffer with descriptors
-+ * @buf: Buffer to be filled
-+ * @buflen: Size of buf
-+ * @src: Array of descriptor pointers, terminated by null pointer.
-+ *
-+ * Copies descriptors into the buffer, returning the length or a
-+ * negative error code if they can't all be copied. Useful when
-+ * assembling descriptors for an associated set of interfaces used
-+ * as part of configuring a composite device; or in other cases where
-+ * sets of descriptors need to be marshaled.
-+ */
-+int
-+usb_descriptor_fillbuf(void *buf, unsigned buflen,
-+ const struct usb_descriptor_header **src)
-+{
-+ u8 *dest = buf;
-+
-+ if (!src)
-+ return -EINVAL;
-+
-+ /* fill buffer from src[] until null descriptor ptr */
-+ for (; 0 != *src; src++) {
-+ unsigned len = (*src)->bLength;
-+
-+ if (len > buflen)
-+ return -EINVAL;
-+ memcpy(dest, *src, len);
-+ buflen -= len;
-+ dest += len;
-+ }
-+ return dest - (u8 *)buf;
-+}
-+
-+
-+/**
-+ * usb_gadget_config_buf - builts a complete configuration descriptor
-+ * @config: Header for the descriptor, including characteristics such
-+ * as power requirements and number of interfaces.
-+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
-+ * endpoint, etc) defining all functions in this device configuration.
-+ * @buf: Buffer for the resulting configuration descriptor.
-+ * @length: Length of buffer. If this is not big enough to hold the
-+ * entire configuration descriptor, an error code will be returned.
-+ *
-+ * This copies descriptors into the response buffer, building a descriptor
-+ * for that configuration. It returns the buffer length or a negative
-+ * status code. The config.wTotalLength field is set to match the length
-+ * of the result, but other descriptor fields (including power usage and
-+ * interface count) must be set by the caller.
-+ *
-+ * Gadget drivers could use this when constructing a config descriptor
-+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
-+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
-+ */
-+int usb_gadget_config_buf(
-+ const struct usb_config_descriptor *config,
-+ void *buf,
-+ unsigned length,
-+ const struct usb_descriptor_header **desc
-+)
-+{
-+ struct usb_config_descriptor *cp = buf;
-+ int len;
-+
-+ /* config descriptor first */
-+ if (length < USB_DT_CONFIG_SIZE || !desc)
-+ return -EINVAL;
-+ *cp = *config;
-+
-+ /* then interface/endpoint/class/vendor/... */
-+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
-+ length - USB_DT_CONFIG_SIZE, desc);
-+ if (len < 0)
-+ return len;
-+ len += USB_DT_CONFIG_SIZE;
-+ if (len > 0xffff)
-+ return -EINVAL;
-+
-+ /* patch up the config descriptor */
-+ cp->bLength = USB_DT_CONFIG_SIZE;
-+ cp->bDescriptorType = USB_DT_CONFIG;
-+ cp->wTotalLength = cpu_to_le16(len);
-+ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+#define RBUF_LEN (1024*1024)
-+static int rbuf_start;
-+static int rbuf_len;
-+static __u8 rbuf[RBUF_LEN];
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define DRIVER_VERSION "St Patrick's Day 2004"
-+
-+static const char shortname [] = "zero";
-+static const char longname [] = "YAMAHA YST-MS35D USB Speaker ";
-+
-+static const char source_sink [] = "source and sink data";
-+static const char loopback [] = "loop input to output";
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * driver assumes self-powered hardware, and
-+ * has no way for users to trigger remote wakeup.
-+ *
-+ * this version autoconfigures as much as possible,
-+ * which is reasonable for most "bulk-only" drivers.
-+ */
-+static const char *EP_IN_NAME; /* source */
-+static const char *EP_OUT_NAME; /* sink */
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* big enough to hold our biggest descriptor */
-+#define USB_BUFSIZ 512
-+
-+struct zero_dev {
-+ spinlock_t lock;
-+ struct usb_gadget *gadget;
-+ struct usb_request *req; /* for control responses */
-+
-+ /* when configured, we have one of two configs:
-+ * - source data (in to host) and sink it (out from host)
-+ * - or loop it back (out from host back in to host)
-+ */
-+ u8 config;
-+ struct usb_ep *in_ep, *out_ep;
-+
-+ /* autoresume timer */
-+ struct timer_list resume;
-+};
-+
-+#define xprintk(d,level,fmt,args...) \
-+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-+
-+#ifdef DEBUG
-+#define DBG(dev,fmt,args...) \
-+ xprintk(dev , KERN_DEBUG , fmt , ## args)
-+#else
-+#define DBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* DEBUG */
-+
-+#ifdef VERBOSE
-+#define VDBG DBG
-+#else
-+#define VDBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* VERBOSE */
-+
-+#define ERROR(dev,fmt,args...) \
-+ xprintk(dev , KERN_ERR , fmt , ## args)
-+#define WARN(dev,fmt,args...) \
-+ xprintk(dev , KERN_WARNING , fmt , ## args)
-+#define INFO(dev,fmt,args...) \
-+ xprintk(dev , KERN_INFO , fmt , ## args)
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static unsigned buflen = 4096;
-+static unsigned qlen = 32;
-+static unsigned pattern = 0;
-+
-+module_param (buflen, uint, S_IRUGO|S_IWUSR);
-+module_param (qlen, uint, S_IRUGO|S_IWUSR);
-+module_param (pattern, uint, S_IRUGO|S_IWUSR);
-+
-+/*
-+ * if it's nonzero, autoresume says how many seconds to wait
-+ * before trying to wake up the host after suspend.
-+ */
-+static unsigned autoresume = 0;
-+module_param (autoresume, uint, 0);
-+
-+/*
-+ * Normally the "loopback" configuration is second (index 1) so
-+ * it's not the default. Here's where to change that order, to
-+ * work better with hosts where config changes are problematic.
-+ * Or controllers (like superh) that only support one config.
-+ */
-+static int loopdefault = 0;
-+
-+module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Thanks to NetChip Technologies for donating this product ID.
-+ *
-+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
-+ * Instead: allocate your own, using normal USB-IF procedures.
-+ */
-+#ifndef CONFIG_USB_ZERO_HNPTEST
-+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
-+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
-+#else
-+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
-+#define DRIVER_PRODUCT_NUM 0xbadd
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * DESCRIPTORS ... most are static, but strings and (full)
-+ * configuration descriptors are built on demand.
-+ */
-+
-+/*
-+#define STRING_MANUFACTURER 25
-+#define STRING_PRODUCT 42
-+#define STRING_SERIAL 101
-+*/
-+#define STRING_MANUFACTURER 1
-+#define STRING_PRODUCT 2
-+#define STRING_SERIAL 3
-+
-+#define STRING_SOURCE_SINK 250
-+#define STRING_LOOPBACK 251
-+
-+/*
-+ * This device advertises two configurations; these numbers work
-+ * on a pxa250 as well as more flexible hardware.
-+ */
-+#define CONFIG_SOURCE_SINK 3
-+#define CONFIG_LOOPBACK 2
-+
-+/*
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
-+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 2,
-+};
-+*/
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+ .bcdUSB = __constant_cpu_to_le16 (0x0100),
-+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
-+ .bDeviceSubClass = 0,
-+ .bDeviceProtocol = 0,
-+ .bMaxPacketSize0 = 64,
-+ .bcdDevice = __constant_cpu_to_le16 (0x0100),
-+ .idVendor = __constant_cpu_to_le16 (0x0499),
-+ .idProduct = __constant_cpu_to_le16 (0x3002),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 1,
-+};
-+
-+static struct usb_config_descriptor
-+z_config = {
-+ .bLength = sizeof z_config,
-+ .bDescriptorType = USB_DT_CONFIG,
-+
-+ /* compute wTotalLength on the fly */
-+ .bNumInterfaces = 2,
-+ .bConfigurationValue = 1,
-+ .iConfiguration = 0,
-+ .bmAttributes = 0x40,
-+ .bMaxPower = 0, /* self-powered */
-+};
-+
-+
-+static struct usb_otg_descriptor
-+otg_descriptor = {
-+ .bLength = sizeof otg_descriptor,
-+ .bDescriptorType = USB_DT_OTG,
-+
-+ .bmAttributes = USB_OTG_SRP,
-+};
-+
-+/* one interface in each configuration */
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+
-+/*
-+ * usb 2.0 devices need to expose both high speed and full speed
-+ * descriptors, unless they only run at full speed.
-+ *
-+ * that means alternate endpoint descriptors (bigger packets)
-+ * and a "device qualifier" ... plus more construction options
-+ * for the config descriptor.
-+ */
-+
-+static struct usb_qualifier_descriptor
-+dev_qualifier = {
-+ .bLength = sizeof dev_qualifier,
-+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .bNumConfigurations = 2,
-+};
-+
-+
-+struct usb_cs_as_general_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bTerminalLink;
-+ __u8 bDelay;
-+ __u16 wFormatTag;
-+} __attribute__ ((packed));
-+
-+struct usb_cs_as_format_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bFormatType;
-+ __u8 bNrChannels;
-+ __u8 bSubframeSize;
-+ __u8 bBitResolution;
-+ __u8 bSamfreqType;
-+ __u8 tLowerSamFreq[3];
-+ __u8 tUpperSamFreq[3];
-+} __attribute__ ((packed));
-+
-+static const struct usb_interface_descriptor
-+z_audio_control_if_desc = {
-+ .bLength = sizeof z_audio_control_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 0,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x1,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc2 = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 1,
-+ .bNumEndpoints = 1,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_cs_as_general_descriptor
-+z_audio_cs_as_if_desc = {
-+ .bLength = 7,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 0x01,
-+ .bTerminalLink = 0x01,
-+ .bDelay = 0x0,
-+ .wFormatTag = __constant_cpu_to_le16 (0x0001)
-+};
-+
-+
-+static const struct usb_cs_as_format_descriptor
-+z_audio_cs_as_format_desc = {
-+ .bLength = 0xe,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 2,
-+ .bFormatType = 1,
-+ .bNrChannels = 1,
-+ .bSubframeSize = 1,
-+ .bBitResolution = 8,
-+ .bSamfreqType = 0,
-+ .tLowerSamFreq = {0x7e, 0x13, 0x00},
-+ .tUpperSamFreq = {0xe2, 0xd6, 0x00},
-+};
-+
-+static const struct usb_endpoint_descriptor
-+z_iso_ep = {
-+ .bLength = 0x09,
-+ .bDescriptorType = 0x05,
-+ .bEndpointAddress = 0x04,
-+ .bmAttributes = 0x09,
-+ .wMaxPacketSize = 0x0038,
-+ .bInterval = 0x01,
-+ .bRefresh = 0x00,
-+ .bSynchAddress = 0x00,
-+};
-+
-+static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+// 9 bytes
-+static char z_ac_interface_header_desc[] =
-+{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
-+
-+// 12 bytes
-+static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
-+ 0x03, 0x00, 0x00, 0x00};
-+// 13 bytes
-+static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
-+ 0x02, 0x00, 0x02, 0x00, 0x00};
-+// 9 bytes
-+static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
-+ 0x00};
-+
-+static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
-+ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+
-+
-+static const struct usb_descriptor_header *z_function [] = {
-+ (struct usb_descriptor_header *) &z_audio_control_if_desc,
-+ (struct usb_descriptor_header *) &z_ac_interface_header_desc,
-+ (struct usb_descriptor_header *) &z_0,
-+ (struct usb_descriptor_header *) &z_1,
-+ (struct usb_descriptor_header *) &z_2,
-+ (struct usb_descriptor_header *) &z_audio_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_if_desc2,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
-+ (struct usb_descriptor_header *) &z_iso_ep,
-+ (struct usb_descriptor_header *) &z_iso_ep2,
-+ (struct usb_descriptor_header *) &za_0,
-+ (struct usb_descriptor_header *) &za_1,
-+ (struct usb_descriptor_header *) &za_2,
-+ (struct usb_descriptor_header *) &za_3,
-+ (struct usb_descriptor_header *) &za_4,
-+ (struct usb_descriptor_header *) &za_5,
-+ (struct usb_descriptor_header *) &za_6,
-+ (struct usb_descriptor_header *) &za_7,
-+ (struct usb_descriptor_header *) &za_8,
-+ (struct usb_descriptor_header *) &za_9,
-+ (struct usb_descriptor_header *) &za_10,
-+ (struct usb_descriptor_header *) &za_11,
-+ (struct usb_descriptor_header *) &za_12,
-+ (struct usb_descriptor_header *) &za_13,
-+ (struct usb_descriptor_header *) &za_14,
-+ (struct usb_descriptor_header *) &za_15,
-+ (struct usb_descriptor_header *) &za_16,
-+ (struct usb_descriptor_header *) &za_17,
-+ (struct usb_descriptor_header *) &za_18,
-+ (struct usb_descriptor_header *) &za_19,
-+ (struct usb_descriptor_header *) &za_20,
-+ (struct usb_descriptor_header *) &za_21,
-+ (struct usb_descriptor_header *) &za_22,
-+ (struct usb_descriptor_header *) &za_23,
-+ (struct usb_descriptor_header *) &za_24,
-+ NULL,
-+};
-+
-+/* maxpacket and other transfer characteristics vary by speed. */
-+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-+
-+#else
-+
-+/* if there's no high speed support, maxpacket doesn't change. */
-+#define ep_desc(g,hs,fs) fs
-+
-+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
-+
-+static char manufacturer [40];
-+//static char serial [40];
-+static char serial [] = "Ser 00 em";
-+
-+/* static strings, in UTF-8 */
-+static struct usb_string strings [] = {
-+ { STRING_MANUFACTURER, manufacturer, },
-+ { STRING_PRODUCT, longname, },
-+ { STRING_SERIAL, serial, },
-+ { STRING_LOOPBACK, loopback, },
-+ { STRING_SOURCE_SINK, source_sink, },
-+ { } /* end of list */
-+};
-+
-+static struct usb_gadget_strings stringtab = {
-+ .language = 0x0409, /* en-us */
-+ .strings = strings,
-+};
-+
-+/*
-+ * config descriptors are also handcrafted. these must agree with code
-+ * that sets configurations, and with code managing interfaces and their
-+ * altsettings. other complexity may come from:
-+ *
-+ * - high speed support, including "other speed config" rules
-+ * - multiple configurations
-+ * - interfaces with alternate settings
-+ * - embedded class or vendor-specific descriptors
-+ *
-+ * this handles high speed, and has a second config that could as easily
-+ * have been an alternate interface setting (on most hardware).
-+ *
-+ * NOTE: to demonstrate (and test) more USB capabilities, this driver
-+ * should include an altsetting to test interrupt transfers, including
-+ * high bandwidth modes at high speed. (Maybe work like Intel's test
-+ * device?)
-+ */
-+static int
-+config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
-+{
-+ int len;
-+ const struct usb_descriptor_header **function;
-+
-+ function = z_function;
-+ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
-+ if (len < 0)
-+ return len;
-+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_request *
-+alloc_ep_req (struct usb_ep *ep, unsigned length)
-+{
-+ struct usb_request *req;
-+
-+ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
-+ if (req) {
-+ req->length = length;
-+ req->buf = usb_ep_alloc_buffer (ep, length,
-+ &req->dma, GFP_ATOMIC);
-+ if (!req->buf) {
-+ usb_ep_free_request (ep, req);
-+ req = NULL;
-+ }
-+ }
-+ return req;
-+}
-+
-+static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->buf)
-+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
-+ usb_ep_free_request (ep, req);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* optionally require specific source/sink data patterns */
-+
-+static int
-+check_read_data (
-+ struct zero_dev *dev,
-+ struct usb_ep *ep,
-+ struct usb_request *req
-+)
-+{
-+ unsigned i;
-+ u8 *buf = req->buf;
-+
-+ for (i = 0; i < req->actual; i++, buf++) {
-+ switch (pattern) {
-+ /* all-zeroes has no synchronization issues */
-+ case 0:
-+ if (*buf == 0)
-+ continue;
-+ break;
-+ /* mod63 stays in sync with short-terminated transfers,
-+ * or otherwise when host and gadget agree on how large
-+ * each usb transfer request should be. resync is done
-+ * with set_interface or set_config.
-+ */
-+ case 1:
-+ if (*buf == (u8)(i % 63))
-+ continue;
-+ break;
-+ }
-+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
-+ usb_ep_set_halt (ep);
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_reset_config (struct zero_dev *dev)
-+{
-+ if (dev->config == 0)
-+ return;
-+
-+ DBG (dev, "reset config\n");
-+
-+ /* just disable endpoints, forcing completion of pending i/o.
-+ * all our completion handlers free their requests in this case.
-+ */
-+ if (dev->in_ep) {
-+ usb_ep_disable (dev->in_ep);
-+ dev->in_ep = NULL;
-+ }
-+ if (dev->out_ep) {
-+ usb_ep_disable (dev->out_ep);
-+ dev->out_ep = NULL;
-+ }
-+ dev->config = 0;
-+ del_timer (&dev->resume);
-+}
-+
-+#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
-+
-+static void
-+zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct zero_dev *dev = ep->driver_data;
-+ int status = req->status;
-+ int i, j;
-+
-+ switch (status) {
-+
-+ case 0: /* normal completion? */
-+ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
-+ for (i=0, j=rbuf_start; i<req->actual; i++) {
-+ //printk ("%02x ", ((__u8*)req->buf)[i]);
-+ rbuf[j] = ((__u8*)req->buf)[i];
-+ j++;
-+ if (j >= RBUF_LEN) j=0;
-+ }
-+ rbuf_start = j;
-+ //printk ("\n\n");
-+
-+ if (rbuf_len < RBUF_LEN) {
-+ rbuf_len += req->actual;
-+ if (rbuf_len > RBUF_LEN) {
-+ rbuf_len = RBUF_LEN;
-+ }
-+ }
-+
-+ break;
-+
-+ /* this endpoint is normally active while we're configured */
-+ case -ECONNABORTED: /* hardware forced ep reset */
-+ case -ECONNRESET: /* request dequeued */
-+ case -ESHUTDOWN: /* disconnect from host */
-+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
-+ req->actual, req->length);
-+ if (ep == dev->out_ep)
-+ check_read_data (dev, ep, req);
-+ free_ep_req (ep, req);
-+ return;
-+
-+ case -EOVERFLOW: /* buffer overrun on read means that
-+ * we didn't provide a big enough
-+ * buffer.
-+ */
-+ default:
-+#if 1
-+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
-+ status, req->actual, req->length);
-+#endif
-+ case -EREMOTEIO: /* short read */
-+ break;
-+ }
-+
-+ status = usb_ep_queue (ep, req, GFP_ATOMIC);
-+ if (status) {
-+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
-+ ep->name, req->length, status);
-+ usb_ep_set_halt (ep);
-+ /* FIXME recover later ... somehow */
-+ }
-+}
-+
-+static struct usb_request *
-+zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
-+{
-+ struct usb_request *req;
-+ int status;
-+
-+ req = alloc_ep_req (ep, 512);
-+ if (!req)
-+ return NULL;
-+
-+ req->complete = zero_isoc_complete;
-+
-+ status = usb_ep_queue (ep, req, gfp_flags);
-+ if (status) {
-+ struct zero_dev *dev = ep->driver_data;
-+
-+ ERROR (dev, "start %s --> %d\n", ep->name, status);
-+ free_ep_req (ep, req);
-+ req = NULL;
-+ }
-+
-+ return req;
-+}
-+
-+/* change our operational config. this code must agree with the code
-+ * that returns config descriptors, and altsetting code.
-+ *
-+ * it's also responsible for power management interactions. some
-+ * configurations might not work with our current power sources.
-+ *
-+ * note that some device controller hardware will constrain what this
-+ * code can do, perhaps by disallowing more than one configuration or
-+ * by limiting configuration choices (like the pxa2xx).
-+ */
-+static int
-+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
-+{
-+ int result = 0;
-+ struct usb_gadget *gadget = dev->gadget;
-+ const struct usb_endpoint_descriptor *d;
-+ struct usb_ep *ep;
-+
-+ if (number == dev->config)
-+ return 0;
-+
-+ zero_reset_config (dev);
-+
-+ gadget_for_each_ep (ep, gadget) {
-+
-+ if (strcmp (ep->name, "ep4") == 0) {
-+
-+ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
-+ result = usb_ep_enable (ep, d);
-+
-+ if (result == 0) {
-+ ep->driver_data = dev;
-+ dev->in_ep = ep;
-+
-+ if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
-+
-+ dev->in_ep = ep;
-+ continue;
-+ }
-+
-+ usb_ep_disable (ep);
-+ result = -EIO;
-+ }
-+ }
-+
-+ }
-+
-+ dev->config = number;
-+ return result;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->status || req->actual != req->length)
-+ DBG ((struct zero_dev *) ep->driver_data,
-+ "setup complete --> %d, %d/%d\n",
-+ req->status, req->actual, req->length);
-+}
-+
-+/*
-+ * The setup() callback implements all the ep0 functionality that's
-+ * not handled lower down, in hardware or the hardware driver (like
-+ * device and endpoint feature flags, and their status). It's all
-+ * housekeeping for the gadget function we're implementing. Most of
-+ * the work is in config-specific setup.
-+ */
-+static int
-+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ struct usb_request *req = dev->req;
-+ int value = -EOPNOTSUPP;
-+
-+ /* usually this stores reply data in the pre-allocated ep0 buffer,
-+ * but config change events will reconfigure hardware.
-+ */
-+ req->zero = 0;
-+ switch (ctrl->bRequest) {
-+
-+ case USB_REQ_GET_DESCRIPTOR:
-+
-+ switch (ctrl->wValue >> 8) {
-+
-+ case USB_DT_DEVICE:
-+ value = min (ctrl->wLength, (u16) sizeof device_desc);
-+ memcpy (req->buf, &device_desc, value);
-+ break;
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ case USB_DT_DEVICE_QUALIFIER:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
-+ memcpy (req->buf, &dev_qualifier, value);
-+ break;
-+
-+ case USB_DT_OTHER_SPEED_CONFIG:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ // FALLTHROUGH
-+#endif /* CONFIG_USB_GADGET_DUALSPEED */
-+ case USB_DT_CONFIG:
-+ value = config_buf (gadget, req->buf,
-+ ctrl->wValue >> 8,
-+ ctrl->wValue & 0xff);
-+ if (value >= 0)
-+ value = min (ctrl->wLength, (u16) value);
-+ break;
-+
-+ case USB_DT_STRING:
-+ /* wIndex == language code.
-+ * this driver only handles one language, you can
-+ * add string tables for other languages, using
-+ * any UTF-8 characters
-+ */
-+ value = usb_gadget_get_string (&stringtab,
-+ ctrl->wValue & 0xff, req->buf);
-+ if (value >= 0) {
-+ value = min (ctrl->wLength, (u16) value);
-+ }
-+ break;
-+ }
-+ break;
-+
-+ /* currently two configs, two speeds */
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl->bRequestType != 0)
-+ goto unknown;
-+
-+ spin_lock (&dev->lock);
-+ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_CONFIGURATION:
-+ if (ctrl->bRequestType != USB_DIR_IN)
-+ goto unknown;
-+ *(u8 *)req->buf = dev->config;
-+ value = min (ctrl->wLength, (u16) 1);
-+ break;
-+
-+ /* until we add altsetting support, or other interfaces,
-+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
-+ * and already killed pending endpoint I/O.
-+ */
-+ case USB_REQ_SET_INTERFACE:
-+
-+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
-+ goto unknown;
-+ spin_lock (&dev->lock);
-+ if (dev->config) {
-+ u8 config = dev->config;
-+
-+ /* resets interface configuration, forgets about
-+ * previous transaction state (queued bufs, etc)
-+ * and re-inits endpoint state (toggle etc)
-+ * no response queued, just zero status == success.
-+ * if we had more than one interface we couldn't
-+ * use this "reset the config" shortcut.
-+ */
-+ zero_reset_config (dev);
-+ zero_set_config (dev, config, GFP_ATOMIC);
-+ value = 0;
-+ }
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_INTERFACE:
-+ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
-+ value = ctrl->wLength;
-+ break;
-+ }
-+ else {
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
-+ goto unknown;
-+ if (!dev->config)
-+ break;
-+ if (ctrl->wIndex != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+ *(u8 *)req->buf = 0;
-+ value = min (ctrl->wLength, (u16) 1);
-+ }
-+ break;
-+
-+ /*
-+ * These are the same vendor-specific requests supported by
-+ * Intel's USB 2.0 compliance test devices. We exceed that
-+ * device spec by allowing multiple-packet requests.
-+ */
-+ case 0x5b: /* control WRITE test -- fill the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* just read that many bytes into the buffer */
-+ if (ctrl->wLength > USB_BUFSIZ)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x5c: /* control READ test -- return the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* expect those bytes are still in the buffer; send back */
-+ if (ctrl->wLength > USB_BUFSIZ
-+ || ctrl->wLength != req->length)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+
-+ case 0x01: // SET_CUR
-+ case 0x02:
-+ case 0x03:
-+ case 0x04:
-+ case 0x05:
-+ value = ctrl->wLength;
-+ break;
-+ case 0x81:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xe3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x81;
-+ //((u8*)req->buf)[1] = 0x81;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x82:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xc3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x82;
-+ //((u8*)req->buf)[1] = 0x82;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x83:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x00;
-+ break;
-+ case 0x0300:
-+ ((u8*)req->buf)[0] = 0x60;
-+ break;
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x18;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x83;
-+ //((u8*)req->buf)[1] = 0x83;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x84:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x01;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x08;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x84;
-+ //((u8*)req->buf)[1] = 0x84;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x85:
-+ ((u8*)req->buf)[0] = 0x85;
-+ ((u8*)req->buf)[1] = 0x85;
-+ value = ctrl->wLength;
-+ break;
-+
-+
-+ default:
-+unknown:
-+ printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
-+ ctrl->bRequestType, ctrl->bRequest,
-+ ctrl->wValue, ctrl->wIndex, ctrl->wLength);
-+ }
-+
-+ /* respond with data transfer before status phase? */
-+ if (value >= 0) {
-+ req->length = value;
-+ req->zero = value < ctrl->wLength
-+ && (value % gadget->ep0->maxpacket) == 0;
-+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
-+ if (value < 0) {
-+ DBG (dev, "ep_queue < 0 --> %d\n", value);
-+ req->status = 0;
-+ zero_setup_complete (gadget->ep0, req);
-+ }
-+ }
-+
-+ /* device either stalls (value < 0) or reports success */
-+ return value;
-+}
-+
-+static void
-+zero_disconnect (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave (&dev->lock, flags);
-+ zero_reset_config (dev);
-+
-+ /* a more significant application might have some non-usb
-+ * activities to quiesce here, saving resources like power
-+ * or pushing the notification up a network stack.
-+ */
-+ spin_unlock_irqrestore (&dev->lock, flags);
-+
-+ /* next we may get setup() calls to enumerate new connections;
-+ * or an unbind() during shutdown (including removing module).
-+ */
-+}
-+
-+static void
-+zero_autoresume (unsigned long _dev)
-+{
-+ struct zero_dev *dev = (struct zero_dev *) _dev;
-+ int status;
-+
-+ /* normally the host would be woken up for something
-+ * more significant than just a timer firing...
-+ */
-+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
-+ status = usb_gadget_wakeup (dev->gadget);
-+ DBG (dev, "wakeup --> %d\n", status);
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_unbind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "unbind\n");
-+
-+ /* we've already been disconnected ... no i/o is active */
-+ if (dev->req)
-+ free_ep_req (gadget->ep0, dev->req);
-+ del_timer_sync (&dev->resume);
-+ kfree (dev);
-+ set_gadget_data (gadget, NULL);
-+}
-+
-+static int
-+zero_bind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev;
-+ //struct usb_ep *ep;
-+
-+ printk("binding\n");
-+ /*
-+ * DRIVER POLICY CHOICE: you may want to do this differently.
-+ * One thing to avoid is reusing a bcdDevice revision code
-+ * with different host-visible configurations or behavior
-+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
-+ */
-+ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
-+
-+
-+ /* ok, we made sense of the hardware ... */
-+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
-+ if (!dev)
-+ return -ENOMEM;
-+ memset (dev, 0, sizeof *dev);
-+ spin_lock_init (&dev->lock);
-+ dev->gadget = gadget;
-+ set_gadget_data (gadget, dev);
-+
-+ /* preallocate control response and buffer */
-+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
-+ if (!dev->req)
-+ goto enomem;
-+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
-+ &dev->req->dma, GFP_KERNEL);
-+ if (!dev->req->buf)
-+ goto enomem;
-+
-+ dev->req->complete = zero_setup_complete;
-+
-+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-+
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ /* assume ep0 uses the same value for both speeds ... */
-+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-+
-+ /* and that all endpoints are dual-speed */
-+ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
-+ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-+#endif
-+
-+ usb_gadget_set_selfpowered (gadget);
-+
-+ init_timer (&dev->resume);
-+ dev->resume.function = zero_autoresume;
-+ dev->resume.data = (unsigned long) dev;
-+
-+ gadget->ep0->driver_data = dev;
-+
-+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
-+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
-+ EP_OUT_NAME, EP_IN_NAME);
-+
-+ snprintf (manufacturer, sizeof manufacturer,
-+ UTS_SYSNAME " " UTS_RELEASE " with %s",
-+ gadget->name);
-+
-+ return 0;
-+
-+enomem:
-+ zero_unbind (gadget);
-+ return -ENOMEM;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_suspend (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ if (gadget->speed == USB_SPEED_UNKNOWN)
-+ return;
-+
-+ if (autoresume) {
-+ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
-+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
-+ } else
-+ DBG (dev, "suspend\n");
-+}
-+
-+static void
-+zero_resume (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "resume\n");
-+ del_timer (&dev->resume);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_gadget_driver zero_driver = {
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ .speed = USB_SPEED_HIGH,
-+#else
-+ .speed = USB_SPEED_FULL,
-+#endif
-+ .function = (char *) longname,
-+ .bind = zero_bind,
-+ .unbind = zero_unbind,
-+
-+ .setup = zero_setup,
-+ .disconnect = zero_disconnect,
-+
-+ .suspend = zero_suspend,
-+ .resume = zero_resume,
-+
-+ .driver = {
-+ .name = (char *) shortname,
-+ // .shutdown = ...
-+ // .suspend = ...
-+ // .resume = ...
-+ },
-+};
-+
-+MODULE_AUTHOR ("David Brownell");
-+MODULE_LICENSE ("Dual BSD/GPL");
-+
-+static struct proc_dir_entry *pdir, *pfile;
-+
-+static int isoc_read_data (char *page, char **start,
-+ off_t off, int count,
-+ int *eof, void *data)
-+{
-+ int i;
-+ static int c = 0;
-+ static int done = 0;
-+ static int s = 0;
-+
-+/*
-+ printk ("\ncount: %d\n", count);
-+ printk ("rbuf_start: %d\n", rbuf_start);
-+ printk ("rbuf_len: %d\n", rbuf_len);
-+ printk ("off: %d\n", off);
-+ printk ("start: %p\n\n", *start);
-+*/
-+ if (done) {
-+ c = 0;
-+ done = 0;
-+ *eof = 1;
-+ return 0;
-+ }
-+
-+ if (c == 0) {
-+ if (rbuf_len == RBUF_LEN)
-+ s = rbuf_start;
-+ else s = 0;
-+ }
-+
-+ for (i=0; i<count && c<rbuf_len; i++, c++) {
-+ page[i] = rbuf[(c+s) % RBUF_LEN];
-+ }
-+ *start = page;
-+
-+ if (c >= rbuf_len) {
-+ *eof = 1;
-+ done = 1;
-+ }
-+
-+
-+ return i;
-+}
-+
-+static int __init init (void)
-+{
-+
-+ int retval = 0;
-+
-+ pdir = proc_mkdir("isoc_test", NULL);
-+ if(pdir == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating dir\n");
-+ goto done;
-+ }
-+ pdir->owner = THIS_MODULE;
-+
-+ pfile = create_proc_read_entry("isoc_data",
-+ 0444, pdir,
-+ isoc_read_data,
-+ NULL);
-+ if (pfile == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating file\n");
-+ goto no_file;
-+ }
-+ pfile->owner = THIS_MODULE;
-+
-+ return usb_gadget_register_driver (&zero_driver);
-+
-+ no_file:
-+ remove_proc_entry("isoc_data", NULL);
-+ done:
-+ return retval;
-+}
-+module_init (init);
-+
-+static void __exit cleanup (void)
-+{
-+
-+ usb_gadget_unregister_driver (&zero_driver);
-+
-+ remove_proc_entry("isoc_data", pdir);
-+ remove_proc_entry("isoc_test", NULL);
-+}
-+module_exit (cleanup);
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
-@@ -0,0 +1,966 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing. The Linux driver attributes
-+ * feature will be used to provide the Linux Diagnostic
-+ * Interface. These attributes are accessed through sysfs.
-+ */
-+
-+/** @page "Linux Module Attributes"
-+ *
-+ * The Linux module attributes feature is used to provide the Linux
-+ * Diagnostic Interface. These attributes are accessed through sysfs.
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing.
-+
-+
-+ The following table shows the attributes.
-+ <table>
-+ <tr>
-+ <td><b> Name</b></td>
-+ <td><b> Description</b></td>
-+ <td><b> Access</b></td>
-+ </tr>
-+
-+ <tr>
-+ <td> mode </td>
-+ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnpcapable </td>
-+ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srpcapable </td>
-+ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnp </td>
-+ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srp </td>
-+ <td> Initiates the Session Request Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> buspower </td>
-+ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> bussuspend </td>
-+ <td> Suspends the USB bus.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> busconnected </td>
-+ <td> Gets the connection status of the bus</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gotgctl </td>
-+ <td> Gets or sets the Core Control Status Register.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gusbcfg </td>
-+ <td> Gets or sets the Core USB Configuration Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> grxfsiz </td>
-+ <td> Gets or sets the Receive FIFO Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gnptxfsiz </td>
-+ <td> Gets or sets the non-periodic Transmit Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gpvndctl </td>
-+ <td> Gets or sets the PHY Vendor Control Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> ggpio </td>
-+ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
-+ or sets the upper 16 bits.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> guid </td>
-+ <td> Gets or sets the value of the User ID Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gsnpsid </td>
-+ <td> Gets the value of the Synopsys ID Regester</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> devspeed </td>
-+ <td> Gets or sets the device speed setting in the DCFG register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> enumspeed </td>
-+ <td> Gets the device enumeration Speed.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hptxfsiz </td>
-+ <td> Gets the value of the Host Periodic Transmit FIFO</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hprt0 </td>
-+ <td> Gets or sets the value in the Host Port Control and Status Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regoffset </td>
-+ <td> Sets the register offset for the next Register Access</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regvalue </td>
-+ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> remote_wakeup </td>
-+ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
-+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
-+ Wakeup signalling bit in the Device Control Register is set for 1
-+ milli-second.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> spramdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcddump </td>
-+ <td> Dumps the current HCD state.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcd_frrem </td>
-+ <td> Shows the average value of the Frame Remaining
-+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
-+ occurs. This can be used to determine the average interrupt latency. Also
-+ shows the average Frame Remaining value for start_transfer and the "a" and
-+ "b" sample points. The "a" and "b" sample points may be used during debugging
-+ bto determine how long it takes to execute a section of the HCD code.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> rd_reg_test </td>
-+ <td> Displays the time required to read the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is read).
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> wr_reg_test </td>
-+ <td> Displays the time required to write the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is written).
-+ <td> Read</td>
-+ </tr>
-+
-+ </table>
-+
-+ Example usage:
-+ To get the current mode:
-+ cat /sys/devices/lm0/mode
-+
-+ To power down the USB:
-+ echo 0 > /sys/devices/lm0/buspower
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/version.h>
-+
-+#include <asm/io.h>
-+
-+#include "linux/dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ val = (val & (_mask_)) >> _shift_; \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ uint32_t clear = set; \
-+ clear = ((~clear) << _shift_) & _mask_; \
-+ set = (set << _shift_) & _mask_; \
-+ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-+ dwc_modify_reg32(_addr_, clear, set); \
-+ return count; \
-+}
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-+ dwc_write_reg32(_addr_, val); \
-+ return count; \
-+}
-+
-+#else
-+
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ val = (val & (_mask_)) >> _shift_; \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ uint32_t clear = set; \
-+ clear = ((~clear) << _shift_) & _mask_; \
-+ set = (set << _shift_) & _mask_; \
-+ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-+ dwc_modify_reg32(_addr_, clear, set); \
-+ return count; \
-+}
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-+ dwc_write_reg32(_addr_, val); \
-+ return count; \
-+}
-+
-+#endif
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+
-+/** @name Functions for Show/Store of Attributes */
-+/**@{*/
-+
-+/**
-+ * Show the register offset of the Register Access.
-+ */
-+static ssize_t regoffset_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-+}
-+
-+/**
-+ * Set the register offset for the next Register Access Read/Write
-+ */
-+static ssize_t regoffset_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t offset = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x\n", offset);
-+ if (offset < 0x00040000 ) {
-+ otg_dev->reg_offset = offset;
-+ }
-+ else {
-+ dev_err( _dev, "invalid offset\n" );
-+ }
-+
-+ return count;
-+}
-+DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store);
-+
-+
-+/**
-+ * Show the value of the register at the offset in the reg_offset
-+ * attribute.
-+ */
-+static ssize_t regvalue_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t val;
-+ volatile uint32_t *addr;
-+
-+ if (otg_dev->reg_offset != 0xFFFFFFFF &&
-+ 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ val = dwc_read_reg32( addr );
-+ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
-+ "Reg@0x%06x = 0x%08x\n",
-+ otg_dev->reg_offset, val);
-+ }
-+ else {
-+ dev_err(_dev, "Invalid offset (0x%0x)\n",
-+ otg_dev->reg_offset);
-+ return sprintf(buf, "invalid offset\n" );
-+ }
-+}
-+
-+/**
-+ * Store the value in the register at the offset in the reg_offset
-+ * attribute.
-+ *
-+ */
-+static ssize_t regvalue_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ volatile uint32_t * addr;
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
-+ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ dwc_write_reg32( addr, val );
-+ }
-+ else {
-+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
-+ otg_dev->reg_offset);
-+ }
-+ return count;
-+}
-+DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-+
-+/*
-+ * Attributes
-+ */
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-+
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-+
-+
-+/**
-+ * @todo Add code to initiate the HNP.
-+ */
-+/**
-+ * Show the HNP status bit
-+ */
-+static ssize_t hnp_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-+}
-+
-+/**
-+ * Set the HNP Request bit
-+ */
-+static ssize_t hnp_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.hnpreq = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-+
-+/**
-+ * @todo Add code to initiate the SRP.
-+ */
-+/**
-+ * Show the SRP status bit
-+ */
-+static ssize_t srp_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+
-+
-+
-+/**
-+ * Set the SRP Request bit
-+ */
-+static ssize_t srp_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-+
-+/**
-+ * @todo Need to do more for power on/off?
-+ */
-+/**
-+ * Show the Bus Power status
-+ */
-+static ssize_t buspower_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-+}
-+
-+
-+/**
-+ * Set the Bus Power status
-+ */
-+static ssize_t buspower_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t on = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtpwr = on;
-+
-+ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+
-+ return count;
-+}
-+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-+
-+/**
-+ * @todo Need to do more for suspend?
-+ */
-+/**
-+ * Show the Bus Suspend status
-+ */
-+static ssize_t bussuspend_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+}
-+
-+/**
-+ * Set the Bus Suspend status
-+ */
-+static ssize_t bussuspend_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtsusp = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-+
-+/**
-+ * Show the status of Remote Wakeup.
-+ */
-+static ssize_t remote_wakeup_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dctl_data_t val;
-+ val.d32 =
-+ dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
-+ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
-+ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+/**
-+ * Initiate a remote wakeup of the host. The Device control register
-+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
-+ * flag is set.
-+ *
-+ */
-+static ssize_t remote_wakeup_store( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ if (val&1) {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
-+ }
-+ else {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
-+ }
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
-+ remote_wakeup_store);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t regdump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dwc_otg_dump_global_registers( otg_dev->core_if);
-+ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
-+ dwc_otg_dump_host_registers( otg_dev->core_if);
-+ } else {
-+ dwc_otg_dump_dev_registers( otg_dev->core_if);
-+
-+ }
-+ return sprintf( buf, "Register Dump\n" );
-+}
-+
-+DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t spramdump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dwc_otg_dump_spram( otg_dev->core_if);
-+
-+ return sprintf( buf, "SPRAM Dump\n" );
-+}
-+
-+DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0);
-+
-+/**
-+ * Dump the current hcd state.
-+ */
-+static ssize_t hcddump_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dwc_otg_hcd_dump_state(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump\n" );
-+}
-+
-+DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
-+
-+/**
-+ * Dump the average frame remaining at SOF. This can be used to
-+ * determine average interrupt latency. Frame remaining is also shown for
-+ * start transfer and two additional sample points.
-+ */
-+static ssize_t hcd_frrem_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump Frame Remaining\n" );
-+}
-+
-+DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
-+
-+/**
-+ * Displays the time required to read the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is read).
-+ */
-+#define RW_REG_COUNT 10000000
-+#define MSEC_PER_JIFFIE 1000/HZ
-+static ssize_t rd_reg_test_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-+}
-+
-+DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
-+
-+/**
-+ * Displays the time required to write the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is written).
-+ */
-+static ssize_t wr_reg_test_show( struct device *_dev,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct device_attribute *attr,
-+#endif
-+ char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ uint32_t reg_val;
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-+}
-+
-+DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
-+/**@}*/
-+
-+/**
-+ * Create the device files
-+ */
-+void dwc_otg_attr_create (struct device *dev)
-+{
-+ int error;
-+
-+ error = device_create_file(dev, &dev_attr_regoffset);
-+ error = device_create_file(dev, &dev_attr_regvalue);
-+ error = device_create_file(dev, &dev_attr_mode);
-+ error = device_create_file(dev, &dev_attr_hnpcapable);
-+ error = device_create_file(dev, &dev_attr_srpcapable);
-+ error = device_create_file(dev, &dev_attr_hnp);
-+ error = device_create_file(dev, &dev_attr_srp);
-+ error = device_create_file(dev, &dev_attr_buspower);
-+ error = device_create_file(dev, &dev_attr_bussuspend);
-+ error = device_create_file(dev, &dev_attr_busconnected);
-+ error = device_create_file(dev, &dev_attr_gotgctl);
-+ error = device_create_file(dev, &dev_attr_gusbcfg);
-+ error = device_create_file(dev, &dev_attr_grxfsiz);
-+ error = device_create_file(dev, &dev_attr_gnptxfsiz);
-+ error = device_create_file(dev, &dev_attr_gpvndctl);
-+ error = device_create_file(dev, &dev_attr_ggpio);
-+ error = device_create_file(dev, &dev_attr_guid);
-+ error = device_create_file(dev, &dev_attr_gsnpsid);
-+ error = device_create_file(dev, &dev_attr_devspeed);
-+ error = device_create_file(dev, &dev_attr_enumspeed);
-+ error = device_create_file(dev, &dev_attr_hptxfsiz);
-+ error = device_create_file(dev, &dev_attr_hprt0);
-+ error = device_create_file(dev, &dev_attr_remote_wakeup);
-+ error = device_create_file(dev, &dev_attr_regdump);
-+ error = device_create_file(dev, &dev_attr_spramdump);
-+ error = device_create_file(dev, &dev_attr_hcddump);
-+ error = device_create_file(dev, &dev_attr_hcd_frrem);
-+ error = device_create_file(dev, &dev_attr_rd_reg_test);
-+ error = device_create_file(dev, &dev_attr_wr_reg_test);
-+}
-+
-+/**
-+ * Remove the device files
-+ */
-+void dwc_otg_attr_remove (struct device *dev)
-+{
-+ device_remove_file(dev, &dev_attr_regoffset);
-+ device_remove_file(dev, &dev_attr_regvalue);
-+ device_remove_file(dev, &dev_attr_mode);
-+ device_remove_file(dev, &dev_attr_hnpcapable);
-+ device_remove_file(dev, &dev_attr_srpcapable);
-+ device_remove_file(dev, &dev_attr_hnp);
-+ device_remove_file(dev, &dev_attr_srp);
-+ device_remove_file(dev, &dev_attr_buspower);
-+ device_remove_file(dev, &dev_attr_bussuspend);
-+ device_remove_file(dev, &dev_attr_busconnected);
-+ device_remove_file(dev, &dev_attr_gotgctl);
-+ device_remove_file(dev, &dev_attr_gusbcfg);
-+ device_remove_file(dev, &dev_attr_grxfsiz);
-+ device_remove_file(dev, &dev_attr_gnptxfsiz);
-+ device_remove_file(dev, &dev_attr_gpvndctl);
-+ device_remove_file(dev, &dev_attr_ggpio);
-+ device_remove_file(dev, &dev_attr_guid);
-+ device_remove_file(dev, &dev_attr_gsnpsid);
-+ device_remove_file(dev, &dev_attr_devspeed);
-+ device_remove_file(dev, &dev_attr_enumspeed);
-+ device_remove_file(dev, &dev_attr_hptxfsiz);
-+ device_remove_file(dev, &dev_attr_hprt0);
-+ device_remove_file(dev, &dev_attr_remote_wakeup);
-+ device_remove_file(dev, &dev_attr_regdump);
-+ device_remove_file(dev, &dev_attr_spramdump);
-+ device_remove_file(dev, &dev_attr_hcddump);
-+ device_remove_file(dev, &dev_attr_hcd_frrem);
-+ device_remove_file(dev, &dev_attr_rd_reg_test);
-+ device_remove_file(dev, &dev_attr_wr_reg_test);
-+}
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
-@@ -0,0 +1,67 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 477051 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_ATTR_H__)
-+#define __DWC_OTG_ATTR_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux device attributes.
-+ */
-+extern struct device_attribute dev_attr_regoffset;
-+extern struct device_attribute dev_attr_regvalue;
-+
-+extern struct device_attribute dev_attr_mode;
-+extern struct device_attribute dev_attr_hnpcapable;
-+extern struct device_attribute dev_attr_srpcapable;
-+extern struct device_attribute dev_attr_hnp;
-+extern struct device_attribute dev_attr_srp;
-+extern struct device_attribute dev_attr_buspower;
-+extern struct device_attribute dev_attr_bussuspend;
-+extern struct device_attribute dev_attr_busconnected;
-+extern struct device_attribute dev_attr_gotgctl;
-+extern struct device_attribute dev_attr_gusbcfg;
-+extern struct device_attribute dev_attr_grxfsiz;
-+extern struct device_attribute dev_attr_gnptxfsiz;
-+extern struct device_attribute dev_attr_gpvndctl;
-+extern struct device_attribute dev_attr_ggpio;
-+extern struct device_attribute dev_attr_guid;
-+extern struct device_attribute dev_attr_gsnpsid;
-+extern struct device_attribute dev_attr_devspeed;
-+extern struct device_attribute dev_attr_enumspeed;
-+extern struct device_attribute dev_attr_hptxfsiz;
-+extern struct device_attribute dev_attr_hprt0;
-+
-+void dwc_otg_attr_create (struct device *dev);
-+void dwc_otg_attr_remove (struct device *dev);
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
-@@ -0,0 +1,3692 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
-+ * $Revision: 1.7 $
-+ * $Date: 2008-12-22 11:43:05 $
-+ * $Change: 1117667 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * The CIL manages the memory map for the core so that the HCD and PCD
-+ * don't have to do this separately. It also handles basic tasks like
-+ * reading/writing the registers and data FIFOs in the controller.
-+ * Some of the data access functions provide encapsulation of several
-+ * operations required to perform a task, such as writing multiple
-+ * registers to start a transfer. Finally, the CIL performs basic
-+ * services that are not specific to either the host or device modes
-+ * of operation. These services include management of the OTG Host
-+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
-+ * Diagnostic API is also provided to allow testing of the controller
-+ * hardware.
-+ *
-+ * The Core Interface Layer has the following requirements:
-+ * - Provides basic controller operations.
-+ * - Minimal use of OS services.
-+ * - The OS services used will be abstracted by using inline functions
-+ * or macros.
-+ *
-+ */
-+#include <asm/unaligned.h>
-+#include <linux/dma-mapping.h>
-+#ifdef DEBUG
-+#include <linux/jiffies.h>
-+#endif
-+
-+#include "linux/dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+
-+/* Included only to access hc->qh for non-dword buffer handling
-+ * TODO: account it
-+ */
-+#include "dwc_otg_hcd.h"
-+
-+/**
-+ * This function is called to initialize the DWC_otg CSR data
-+ * structures. The register addresses in the device and host
-+ * structures are initialized from the base address supplied by the
-+ * caller. The calling function must make the OS calls to get the
-+ * base address of the DWC_otg controller registers. The core_params
-+ * argument holds the parameters that specify how the core should be
-+ * configured.
-+ *
-+ * @param[in] reg_base_addr Base address of DWC_otg core registers
-+ * @param[in] core_params Pointer to the core configuration parameters
-+ *
-+ */
-+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
-+ dwc_otg_core_params_t *core_params)
-+{
-+ dwc_otg_core_if_t *core_if = 0;
-+ dwc_otg_dev_if_t *dev_if = 0;
-+ dwc_otg_host_if_t *host_if = 0;
-+ uint8_t *reg_base = (uint8_t *)reg_base_addr;
-+ int i = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
-+
-+ core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
-+
-+ if (core_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
-+ return 0;
-+ }
-+
-+ memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-+
-+ core_if->core_params = core_params;
-+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
-+
-+ /*
-+ * Allocate the Device Mode structures.
-+ */
-+ dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
-+
-+ if (dev_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
-+ kfree(core_if);
-+ return 0;
-+ }
-+
-+ dev_if->dev_global_regs =
-+ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
-+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+
-+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
-+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
-+ i, &dev_if->in_ep_regs[i]->diepctl);
-+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
-+ i, &dev_if->out_ep_regs[i]->doepctl);
-+ }
-+
-+ dev_if->speed = 0; // unknown
-+
-+ core_if->dev_if = dev_if;
-+
-+ /*
-+ * Allocate the Host Mode structures.
-+ */
-+ host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
-+
-+ if (host_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
-+ kfree(dev_if);
-+ kfree(core_if);
-+ return 0;
-+ }
-+
-+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
-+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-+
-+ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
-+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
-+ (i * DWC_OTG_CHAN_REGS_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-+ i, &host_if->hc_regs[i]->hcchar);
-+ }
-+
-+ host_if->num_host_channels = MAX_EPS_CHANNELS;
-+ core_if->host_if = host_if;
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ core_if->data_fifo[i] =
-+ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
-+ (i * DWC_OTG_DATA_FIFO_SIZE));
-+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
-+ i, (unsigned)core_if->data_fifo[i]);
-+ }
-+
-+ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-+
-+ /*
-+ * Store the contents of the hardware configuration registers here for
-+ * easy access later.
-+ */
-+ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
-+ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
-+ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
-+ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-+
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-+
-+ core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-+ core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+
-+ DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
-+ DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
-+ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
-+ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
-+ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
-+ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-+
-+ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
-+ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-+
-+ /*
-+ * Set the SRP sucess bit for FS-I2c
-+ */
-+ core_if->srp_success = 0;
-+ core_if->srp_timer_started = 0;
-+
-+
-+ /*
-+ * Create new workqueue and init works
-+ */
-+ core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
-+ if(core_if->wq_otg == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
-+ kfree(host_if);
-+ kfree(dev_if);
-+ kfree(core_if);
-+ return 0 * HZ;
-+ }
-+
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
-+ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
-+
-+#else
-+
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
-+ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
-+
-+#endif
-+ return core_if;
-+}
-+
-+/**
-+ * This function frees the structures allocated by dwc_otg_cil_init().
-+ *
-+ * @param[in] core_if The core interface pointer returned from
-+ * dwc_otg_cil_init().
-+ *
-+ */
-+void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
-+{
-+ /* Disable all interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
-+ dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
-+
-+ if (core_if->wq_otg) {
-+ destroy_workqueue(core_if->wq_otg);
-+ }
-+ if (core_if->dev_if) {
-+ kfree(core_if->dev_if);
-+ }
-+ if (core_if->host_if) {
-+ kfree(core_if->host_if);
-+ }
-+ kfree(core_if);
-+}
-+
-+/**
-+ * This function enables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-+}
-+
-+/**
-+ * This function disables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the commmon interrupts, used in both
-+ * device and host modes.
-+ *
-+ * @param[in] core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ /* Clear any pending OTG Interrupts */
-+ dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
-+
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /*
-+ * Enable the interrupts in the GINTMSK.
-+ */
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.otgintr = 1;
-+
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.rxstsqlvl = 1;
-+ }
-+
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+ intr_mask.b.sessreqintr = 1;
-+ dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
-+}
-+
-+/**
-+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
-+ * type.
-+ */
-+static void init_fslspclksel(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t val;
-+ hcfg_data_t hcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = DWC_HCFG_48_MHZ;
-+ }
-+ else {
-+ /* High speed PHY running at full speed or high speed */
-+ val = DWC_HCFG_30_60_MHZ;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
-+ hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
-+ hcfg.b.fslspclksel = val;
-+ dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+/**
-+ * Initializes the DevSpd field of the DCFG register depending on the PHY type
-+ * and the enumeration speed of the device.
-+ */
-+static void init_devspd(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t val;
-+ dcfg_data_t dcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = 0x3;
-+ }
-+ else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ /* High speed PHY running at full speed */
-+ val = 0x1;
-+ }
-+ else {
-+ /* High speed PHY running at high speed */
-+ val = 0x0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-+
-+ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+/**
-+ * This function calculates the number of IN EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t num_in_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
-+ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
-+ int i;
-+
-+
-+ for(i = 0; i < num_eps; ++i)
-+ {
-+ if(!(hwcfg1 & 0x1))
-+ num_in_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+
-+ if(core_if->hwcfg4.b.ded_fifo_en) {
-+ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
-+ }
-+
-+ return num_in_eps;
-+}
-+
-+
-+/**
-+ * This function calculates the number of OUT EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t num_out_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
-+ int i;
-+
-+ for(i = 0; i < num_eps; ++i)
-+ {
-+ if(!(hwcfg1 & 0x2))
-+ num_out_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+ return num_out_eps;
-+}
-+/**
-+ * This function initializes the DWC_otg controller registers and
-+ * prepares the core for device mode or host mode operation.
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
-+{
-+ int i = 0;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ gahbcfg_data_t ahbcfg = { .d32 = 0 };
-+ gusbcfg_data_t usbcfg = { .d32 = 0 };
-+ gi2cctl_data_t i2cctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
-+
-+ /* Common Initialization */
-+
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+// usbcfg.b.tx_end_delay = 1;
-+ /* Program the ULPI External VBUS bit if needed */
-+ usbcfg.b.ulpi_ext_vbus_drv =
-+ (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-+
-+ /* Set external TS Dline pulsing */
-+ usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+
-+ /* Reset the Controller */
-+ dwc_otg_core_reset(core_if);
-+
-+ /* Initialize parameters from Hardware configuration registers. */
-+ dev_if->num_in_eps = calc_num_in_eps(core_if);
-+ dev_if->num_out_eps = calc_num_out_eps(core_if);
-+
-+
-+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
-+
-+ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ dev_if->perio_tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
-+ {
-+ dev_if->tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
-+ core_if->rx_fifo_size =
-+ dwc_read_reg32(&global_regs->grxfsiz);
-+ core_if->nperio_tx_fifo_size =
-+ dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-+
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* If FS mode with FS PHY */
-+
-+ /* core_init() is now called on every switch so only call the
-+ * following for the first time through. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.physel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after a PHY select */
-+ dwc_otg_core_reset(core_if);
-+ }
-+
-+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
-+ * do this on HNP Dev/Host mode switches (done in dev_init and
-+ * host_init). */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ init_fslspclksel(core_if);
-+ }
-+ else {
-+ init_devspd(core_if);
-+ }
-+
-+ if (core_if->core_params->i2c_enable) {
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
-+ /* Program GUSBCFG.OtgUtmifsSel to I2C */
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.otgutmifssel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Program GI2CCTL.I2CEn */
-+ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
-+ i2cctl.b.i2cdevaddr = 1;
-+ i2cctl.b.i2cen = 0;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ i2cctl.b.i2cen = 1;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ }
-+
-+ } /* endif speed == DWC_SPEED_PARAM_FULL */
-+
-+ else {
-+ /* High speed PHY. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+ usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
-+ if (usbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ usbcfg.b.phyif = 0;
-+ usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
-+ }
-+ else {
-+ /* UTMI+ interface */
-+ if (core_if->core_params->phy_utmi_width == 16) {
-+ usbcfg.b.phyif = 1;
-+ }
-+ else {
-+ usbcfg.b.phyif = 0;
-+ }
-+ }
-+
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after setting the PHY parameters */
-+ dwc_otg_core_reset(core_if);
-+ }
-+ }
-+
-+ if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) {
-+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 1;
-+ usbcfg.b.ulpi_clk_sus_m = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+ else {
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 0;
-+ usbcfg.b.ulpi_clk_sus_m = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+
-+ /* Program the GAHBCFG Register.*/
-+ switch (core_if->hwcfg2.b.architecture) {
-+
-+ case DWC_SLAVE_ONLY_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
-+ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ core_if->dma_enable = 0;
-+ core_if->dma_desc_enable = 0;
-+ break;
-+
-+ case DWC_EXT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
-+ ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ case DWC_INT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
-+ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ }
-+ ahbcfg.b.dmaenable = core_if->dma_enable;
-+ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
-+
-+ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
-+
-+ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
-+ core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
-+ DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
-+ DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
-+
-+ /*
-+ * Program the GUSBCFG register.
-+ */
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+ switch (core_if->hwcfg2.b.op_mode) {
-+ case DWC_MODE_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_SRP_ONLY_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+ }
-+
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Enable common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Do device or host intialization based on mode during PCD
-+ * and HCD initialization */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
-+ core_if->op_state = A_HOST;
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
-+ core_if->op_state = B_PERIPHERAL;
-+#ifdef DWC_DEVICE_ONLY
-+ dwc_otg_core_dev_init(core_if);
-+#endif
-+ }
-+}
-+
-+
-+/**
-+ * This function enables the Device mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Enable interrupts */
-+ intr_mask.b.usbreset = 1;
-+ intr_mask.b.enumdone = 1;
-+
-+ if(!core_if->multiproc_int_enable) {
-+ intr_mask.b.inepintr = 1;
-+ intr_mask.b.outepintr = 1;
-+ }
-+
-+ intr_mask.b.erlysuspend = 1;
-+
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.epmismatch = 1;
-+ }
-+
-+
-+#ifdef DWC_EN_ISOC
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable == 0) {
-+ if(core_if->pti_enh_enable) {
-+ dctl_data_t dctl = { .d32 = 0 };
-+ dctl.b.ifrmnum = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+ }
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+#endif // DWC_EN_ISOC
-+
-+/** @todo NGS: Should this be a module parameter? */
-+#ifdef USE_PERIODIC_EP
-+ intr_mask.b.isooutdrop = 1;
-+ intr_mask.b.eopframe = 1;
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+#endif
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
-+ dwc_read_reg32(&global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * device mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ dcfg_data_t dcfg = { .d32 = 0};
-+ grstctl_t resetctl = { .d32 = 0 };
-+ uint32_t rx_fifo_size;
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t txfifosize;
-+ dthrctl_data_t dthrctl;
-+ fifosize_data_t ptxfifosize;
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(core_if->pcgcctl, 0);
-+
-+ /* Device configuration register */
-+ init_devspd(core_if);
-+ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
-+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ rx_fifo_size = params->dev_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /** Set Periodic Tx FIFO Mask all bits 0 */
-+ core_if->p_tx_msk = 0;
-+
-+ /** Set Tx FIFO Mask all bits 0 */
-+ core_if->tx_msk = 0;
-+
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ /**@todo NGS: Fix Periodic FIFO Sizing! */
-+ /*
-+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_perio_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz array run from 0 to 14.
-+ */
-+ /** @todo Finish debug of this */
-+ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
-+ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
-+ ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ ptxfifosize.b.startaddr += ptxfifosize.b.depth;
-+ }
-+ }
-+ else {
-+ /*
-+ * Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz_dieptxf array run from 0 to 14.
-+ */
-+
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ /*
-+ Modify by kaiker ,for RT3052 device mode config
-+
-+ In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is
-+ configed to 0 so these TX_FIF0 not config.IN EP will can't
-+ more than 1 if not modify it.
-+
-+ */
-+#if 1
-+ for (i=1 ; i <= dev_if->num_in_eps; i++)
-+#else
-+ for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+#endif
-+ {
-+
-+ txfifosize.b.depth = params->dev_tx_fifo_size[i];
-+
-+ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+
-+ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1],
-+ txfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
-+
-+ txfifosize.b.startaddr += txfifosize.b.depth;
-+ }
-+ }
-+ }
-+ /* Flush the FIFOs */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Flush the Learning Queue. */
-+ resetctl.b.intknqflsh = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ /* Clear all pending Device Interrupts */
-+
-+ if(core_if->multiproc_int_enable) {
-+ }
-+
-+ /** @todo - if the condition needed to be checked
-+ * or in any case all pending interrutps should be cleared?
-+ */
-+ if(core_if->multiproc_int_enable) {
-+ for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
-+ }
-+
-+ for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
-+ }
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
-+ } else {
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
-+ dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
-+ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
-+ }
-+
-+ for (i=0; i <= dev_if->num_in_eps; i++)
-+ {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else {
-+ depctl.d32 = 0;
-+ }
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
-+ }
-+
-+ for (i=0; i <= dev_if->num_out_eps; i++)
-+ {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else {
-+ depctl.d32 = 0;
-+ }
-+
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-+
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
-+ }
-+
-+ if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
-+ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
-+ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
-+ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
-+
-+ dev_if->rx_thr_length = params->rx_thr_length;
-+ dev_if->tx_thr_length = params->tx_thr_length;
-+
-+ dev_if->setup_desc_index = 0;
-+
-+ dthrctl.d32 = 0;
-+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
-+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
-+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
-+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
-+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
-+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
-+
-+ }
-+
-+ dwc_otg_enable_device_interrupts(core_if);
-+
-+ {
-+ diepmsk_data_t msk = { .d32 = 0 };
-+ msk.b.txfifoundrn = 1;
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
-+ }
-+ }
-+
-+
-+ if(core_if->multiproc_int_enable) {
-+ /* Set NAK on Babble */
-+ dctl_data_t dctl = { .d32 = 0};
-+ dctl.b.nakonbble = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function enables the Host mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts. */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /*
-+ * Enable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+}
-+
-+/**
-+ * This function disables the Host Mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-+
-+ /*
-+ * Disable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+ intr_mask.b.ptxfempty = 1;
-+ intr_mask.b.nptxfempty = 1;
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * host mode.
-+ *
-+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ * request queues. Host channels are reset to ensure that they are ready for
-+ * performing transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ hprt0_data_t hprt0 = { .d32 = 0 };
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t ptxfifosize;
-+ int i;
-+ hcchar_data_t hcchar;
-+ hcfg_data_t hcfg;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ int num_channels;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(core_if->pcgcctl, 0);
-+
-+ /* Initialize Host Configuration Register */
-+ init_fslspclksel(core_if);
-+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
-+ {
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+ hcfg.b.fslssupp = 1;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
-+ }
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ /* Periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
-+ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ }
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ /* Make sure the FIFOs are flushed. */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Flush out any leftover queued requests. */
-+ num_channels = core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ /* Halt all channels to put them into a known state. */
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ int count = 0;
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
-+ do {
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (++count > 1000)
-+ {
-+ DWC_ERROR("%s: Unable to clear halt on channel %d\n",
-+ __func__, i);
-+ break;
-+ }
-+ }
-+ while (hcchar.b.chen);
-+ }
-+
-+ /* Turn on the vbus power. */
-+ DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
-+ if (core_if->op_state == A_HOST) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-+ if (hprt0.b.prtpwr == 0) {
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(host_if->hprt0, hprt0.d32);
-+ }
-+ }
-+
-+ dwc_otg_enable_host_interrupts(core_if);
-+}
-+
-+/**
-+ * Prepares a host channel for transferring packets to/from a specific
-+ * endpoint. The HCCHARn register is set up with the characteristics specified
-+ * in _hc. Host channel interrupts that may need to be serviced while this
-+ * transfer is in progress are enabled.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ * @param hc Information needed to initialize the host channel
-+ */
-+void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ uint32_t intr_enable;
-+ hcintmsk_data_t hc_intr_mask;
-+ gintmsk_data_t gintmsk = { .d32 = 0 };
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+
-+ uint8_t hc_num = hc->hc_num;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-+
-+ /* Clear old interrupt conditions for this host channel. */
-+ hc_intr_mask.d32 = 0xFFFFFFFF;
-+ hc_intr_mask.b.reserved = 0;
-+ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-+
-+ /* Enable channel interrupts required for this transfer. */
-+ hc_intr_mask.d32 = 0;
-+ hc_intr_mask.b.chhltd = 1;
-+ if (core_if->dma_enable) {
-+ hc_intr_mask.b.ahberr = 1;
-+ if (hc->error_state && !hc->do_split &&
-+ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ hc_intr_mask.b.ack = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-+ hc_intr_mask.b.nak = 1;
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.nyet = 1;
-+ if (hc->do_ping) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ hc_intr_mask.b.nak = 1;
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_INTR:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_ISOC:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+ hc_intr_mask.b.ack = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ break;
-+ }
-+ }
-+ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-+
-+// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
-+// hc->max_packet = 512;
-+ /* Enable the top level host channel interrupt. */
-+ intr_enable = (1 << hc_num);
-+ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-+
-+ /* Make sure host channel interrupts are enabled. */
-+ gintmsk.b.hcintr = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+
-+ /*
-+ * Program the HCCHARn register with the endpoint characteristics for
-+ * the current transfer.
-+ */
-+ hcchar.d32 = 0;
-+ hcchar.b.devaddr = hc->dev_addr;
-+ hcchar.b.epnum = hc->ep_num;
-+ hcchar.b.epdir = hc->ep_is_in;
-+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
-+ hcchar.b.eptype = hc->ep_type;
-+ hcchar.b.mps = hc->max_packet;
-+
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
-+ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
-+
-+ /*
-+ * Program the HCSPLIT register for SPLITs
-+ */
-+ hcsplt.d32 = 0;
-+ if (hc->do_split) {
-+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
-+ hc->complete_split ? "CSPLIT" : "SSPLIT");
-+ hcsplt.b.compsplt = hc->complete_split;
-+ hcsplt.b.xactpos = hc->xact_pos;
-+ hcsplt.b.hubaddr = hc->hub_addr;
-+ hcsplt.b.prtaddr = hc->port_addr;
-+ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split);
-+ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos);
-+ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len);
-+ }
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-+
-+}
-+
-+/**
-+ * Attempts to halt a host channel. This function should only be called in
-+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
-+ * normal circumstances in DMA mode, the controller halts the channel when the
-+ * transfer is complete or a condition occurs that requires application
-+ * intervention.
-+ *
-+ * In slave mode, checks for a free request queue entry, then sets the Channel
-+ * Enable and Channel Disable bits of the Host Channel Characteristics
-+ * register of the specified channel to intiate the halt. If there is no free
-+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
-+ * register to flush requests for this channel. In the latter case, sets a
-+ * flag to indicate that the host channel needs to be halted when a request
-+ * queue slot is open.
-+ *
-+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ * HCCHARn register. The controller ensures there is space in the request
-+ * queue before submitting the halt request.
-+ *
-+ * Some time may elapse before the core flushes any posted requests for this
-+ * host channel and halts. The Channel Halted interrupt handler completes the
-+ * deactivation of the host channel.
-+ *
-+ * @param core_if Controller register interface.
-+ * @param hc Host channel to halt.
-+ * @param halt_status Reason for halting the channel.
-+ */
-+void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
-+ dwc_hc_t *hc,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ gnptxsts_data_t nptxsts;
-+ hptxsts_data_t hptxsts;
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_core_global_regs_t *global_regs;
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ global_regs = core_if->core_global_regs;
-+ host_global_regs = core_if->host_if->host_global_regs;
-+
-+ WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Disable all channel interrupts except Ch Halted. The QTD
-+ * and QH state associated with this transfer has been cleared
-+ * (in the case of URB_DEQUEUE), so the channel needs to be
-+ * shut down carefully to prevent crashes.
-+ */
-+ hcintmsk_data_t hcintmsk;
-+ hcintmsk.d32 = 0;
-+ hcintmsk.b.chhltd = 1;
-+ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-+
-+ /*
-+ * Make sure no other interrupts besides halt are currently
-+ * pending. Handling another interrupt could cause a crash due
-+ * to the QTD and QH state.
-+ */
-+ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-+
-+ /*
-+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-+ * even if the channel was already halted for some other
-+ * reason.
-+ */
-+ hc->halt_status = halt_status;
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen == 0) {
-+ /*
-+ * The channel is either already halted or it hasn't
-+ * started yet. In DMA mode, the transfer may halt if
-+ * it finishes normally or a condition occurs that
-+ * requires driver intervention. Don't want to halt
-+ * the channel again. In either Slave or DMA mode,
-+ * it's possible that the transfer has been assigned
-+ * to a channel, but not started yet when an URB is
-+ * dequeued. Don't want to halt a channel that hasn't
-+ * started yet.
-+ */
-+ return;
-+ }
-+ }
-+
-+ if (hc->halt_pending) {
-+ /*
-+ * A halt has already been issued for this channel. This might
-+ * happen when a transfer is aborted by a higher level in
-+ * the stack.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
-+ __func__, hc->hc_num);
-+
-+/* dwc_otg_dump_global_registers(core_if); */
-+/* dwc_otg_dump_host_registers(core_if); */
-+#endif
-+ return;
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+
-+ if (!core_if->dma_enable) {
-+ /* Check for space in the request queue to issue the halt. */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (nptxsts.b.nptxqspcavail == 0) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ else {
-+ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
-+ if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ }
-+
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->halt_status = halt_status;
-+
-+ if (hcchar.b.chen) {
-+ hc->halt_pending = 1;
-+ hc->halt_on_queue = 0;
-+ }
-+ else {
-+ hc->halt_on_queue = 1;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
-+
-+ return;
-+}
-+
-+/**
-+ * Clears the transfer state for a host channel. This function is normally
-+ * called after a transfer is done and the host channel is being released.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to clean up.
-+ */
-+void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ dwc_otg_hc_regs_t *hc_regs;
-+
-+ hc->xfer_started = 0;
-+
-+ /*
-+ * Clear channel interrupt enables and any unhandled channel interrupt
-+ * conditions.
-+ */
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0);
-+ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-+
-+#ifdef DEBUG
-+ del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+ }
-+#endif
-+}
-+
-+/**
-+ * Sets the channel property that indicates in which frame a periodic transfer
-+ * should occur. This is always set to the _next_ frame. This function has no
-+ * effect on non-periodic transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to set up and its properties.
-+ * @param hcchar Current value of the HCCHAR register for the specified host
-+ * channel.
-+ */
-+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
-+ dwc_hc_t *hc,
-+ hcchar_data_t *hcchar)
-+{
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hfnum_data_t hfnum;
-+ hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
-+
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+#ifdef DEBUG
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
-+ switch (hfnum.b.frnum & 0x7) {
-+ case 7:
-+ core_if->hfnum_7_samples++;
-+ core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
-+ break;
-+ case 0:
-+ core_if->hfnum_0_samples++;
-+ core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
-+ break;
-+ default:
-+ core_if->hfnum_other_samples++;
-+ core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
-+ break;
-+ }
-+ }
-+#endif
-+ }
-+}
-+
-+#ifdef DEBUG
-+static void hc_xfer_timeout(unsigned long ptr)
-+{
-+ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
-+ int hc_num = xfer_info->hc->hc_num;
-+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-+ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-+}
-+#endif
-+
-+/*
-+ * This function does the setup for a data transfer for a host channel and
-+ * starts the transfer. May be called in either Slave mode or DMA mode. In
-+ * Slave mode, the caller must ensure that there is sufficient space in the
-+ * request queue and Tx Data FIFO.
-+ *
-+ * For an OUT transfer in Slave mode, it loads a data packet into the
-+ * appropriate FIFO. If necessary, additional data packets will be loaded in
-+ * the Host ISR.
-+ *
-+ * For an IN transfer in Slave mode, a data packet is requested. The data
-+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
-+ * additional data packets are requested in the Host ISR.
-+ *
-+ * For a PING transfer in Slave mode, the Do Ping bit is set in the egards,
-+ *
-+ * Steven
-+ *
-+ * register along with a packet count of 1 and the channel is enabled. This
-+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ * simply set to 0 since no data transfer occurs in this case.
-+ *
-+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ * all the information required to perform the subsequent data transfer. In
-+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ * controller performs the entire PING protocol, then starts the data
-+ * transfer.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Information needed to initialize the host channel. The xfer_len
-+ * value may be reduced to accommodate the max widths of the XferSize and
-+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ * to reflect the final xfer_len value.
-+ */
-+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ uint16_t num_packets;
-+ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
-+ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hctsiz.d32 = 0;
-+
-+ if (hc->do_ping) {
-+ if (!core_if->dma_enable) {
-+ dwc_otg_hc_do_ping(core_if, hc);
-+ hc->xfer_started = 1;
-+ return;
-+ }
-+ else {
-+ hctsiz.b.dopng = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ num_packets = 1;
-+
-+ if (hc->complete_split && !hc->ep_is_in) {
-+ /* For CSPLIT OUT Transfer, set the size to 0 so the
-+ * core doesn't expect any data written to the FIFO */
-+ hc->xfer_len = 0;
-+ }
-+ else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
-+ hc->xfer_len = hc->max_packet;
-+ }
-+ else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
-+ hc->xfer_len = 188;
-+ }
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ }
-+ else {
-+ /*
-+ * Ensure that the transfer length and packet count will fit
-+ * in the widths allocated for them in the HCTSIZn register.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure the transfer size is no larger than one
-+ * (micro)frame's worth of data. (A check was done
-+ * when the periodic transfer was accepted to ensure
-+ * that a (micro)frame's worth of data can be
-+ * programmed into a channel.)
-+ */
-+ uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
-+ if (hc->xfer_len > max_periodic_len) {
-+ hc->xfer_len = max_periodic_len;
-+ }
-+ else {
-+ }
-+
-+ }
-+ else if (hc->xfer_len > max_hc_xfer_size) {
-+ /* Make sure that xfer_len is a multiple of max packet size. */
-+ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
-+ }
-+
-+ if (hc->xfer_len > 0) {
-+ num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
-+ if (num_packets > max_hc_pkt_count) {
-+ num_packets = max_hc_pkt_count;
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+ }
-+ else {
-+ /* Need 1 packet for transfer length of 0. */
-+ num_packets = 1;
-+ }
-+
-+ if (hc->ep_is_in) {
-+ /* Always program an integral # of max packets for IN transfers. */
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure that the multi_count field matches the
-+ * actual transfer length.
-+ */
-+ hc->multi_count = num_packets;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /* Set up the initial PID for the transfer. */
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ if (hc->ep_is_in) {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ else if (hc->multi_count == 2) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
-+ }
-+ }
-+ else {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
-+ }
-+ }
-+ }
-+ else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ }
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ }
-+
-+ hc->start_pkt_count = num_packets;
-+ hctsiz.b.pktcnt = num_packets;
-+ hctsiz.b.pid = hc->data_pid_start;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+
-+ if (core_if->dma_enable) {
-+#if defined (CONFIG_DWC_OTG_HOST_ONLY)
-+ if ((uint32_t)hc->xfer_buff & 0x3) {
-+ /* non DWORD-aligned buffer case*/
-+ if(!hc->qh->dw_align_buf) {
-+ hc->qh->dw_align_buf =
-+ dma_alloc_coherent(NULL,
-+ core_if->core_params->max_transfer_size,
-+ &hc->qh->dw_align_buf_dma,
-+ GFP_ATOMIC | GFP_DMA);
-+ if (!hc->qh->dw_align_buf) {
-+
-+ DWC_ERROR("%s: Failed to allocate memory to handle "
-+ "non-dword aligned buffer case\n", __func__);
-+ return;
-+ }
-+
-+ }
-+ if (!hc->ep_is_in) {
-+ memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len);
-+ }
-+
-+ dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma);
-+ }
-+ else
-+#endif
-+ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
-+ }
-+
-+ /* Start the split */
-+ if (hc->do_split) {
-+ hcsplt_data_t hcsplt;
-+ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
-+ hcsplt.b.spltena = 1;
-+ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.multicnt = hc->multi_count;
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+#ifdef DEBUG
-+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+#endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->xfer_started = 1;
-+ hc->requests++;
-+
-+ if (!core_if->dma_enable &&
-+ !hc->ep_is_in && hc->xfer_len > 0) {
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ }
-+
-+#ifdef DEBUG
-+ /* Start a timer for this transfer. */
-+ core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
-+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
-+ core_if->hc_xfer_info[hc->hc_num].hc = hc;
-+ core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
-+ core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
-+ add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
-+#endif
-+}
-+
-+/**
-+ * This function continues a data transfer that was started by previous call
-+ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
-+ * sufficient space in the request queue and Tx Data FIFO. This function
-+ * should only be called in Slave mode. In DMA mode, the controller acts
-+ * autonomously to complete transfers programmed to a host channel.
-+ *
-+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
-+ * if there is any data remaining to be queued. For an IN transfer, another
-+ * data packet is always requested. For the SETUP phase of a control transfer,
-+ * this function does nothing.
-+ *
-+ * @return 1 if a new request is queued, 0 if no more requests are required
-+ * for this transfer.
-+ */
-+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /* SPLITs always queue just once per channel */
-+ return 0;
-+ }
-+ else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ /* SETUPs are queued only once since they can't be NAKed. */
-+ return 0;
-+ }
-+ else if (hc->ep_is_in) {
-+ /*
-+ * Always queue another request for other IN transfers. If
-+ * back-to-back INs are issued and NAKs are received for both,
-+ * the driver may still be processing the first NAK when the
-+ * second NAK is received. When the interrupt handler clears
-+ * the NAK interrupt for the first NAK, the second NAK will
-+ * not be seen. So we can't depend on the NAK interrupt
-+ * handler to requeue a NAKed request. Instead, IN requests
-+ * are issued each time this function is called. When the
-+ * transfer completes, the extra requests for the channel will
-+ * be flushed.
-+ */
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ hc->requests++;
-+ return 1;
-+ }
-+ else {
-+ /* OUT transfers. */
-+ if (hc->xfer_count < hc->xfer_len) {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ }
-+
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ hc->requests++;
-+ return 1;
-+ }
-+ else {
-+ return 0;
-+ }
-+ }
-+}
-+
-+/**
-+ * Starts a PING transfer. This function should only be called in Slave mode.
-+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
-+ */
-+void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ hctsiz.d32 = 0;
-+ hctsiz.b.dopng = 1;
-+ hctsiz.b.pktcnt = 1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+}
-+
-+/*
-+ * This function writes a packet into the Tx FIFO associated with the Host
-+ * Channel. For a channel associated with a non-periodic EP, the non-periodic
-+ * Tx FIFO is written. For a channel associated with a periodic EP, the
-+ * periodic Tx FIFO is written. This function should only be called in Slave
-+ * mode.
-+ *
-+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
-+ * then number of bytes written to the Tx FIFO.
-+ */
-+void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
-+{
-+ uint32_t i;
-+ uint32_t remaining_count;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+
-+ uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
-+ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
-+
-+ remaining_count = hc->xfer_len - hc->xfer_count;
-+ if (remaining_count > hc->max_packet) {
-+ byte_count = hc->max_packet;
-+ }
-+ else {
-+ byte_count = remaining_count;
-+ }
-+
-+ dword_count = (byte_count + 3) / 4;
-+
-+ if ((((unsigned long)data_buff) & 0x3) == 0) {
-+ /* xfer_buff is DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++)
-+ {
-+ dwc_write_reg32(data_fifo, *data_buff);
-+ }
-+ }
-+ else {
-+ /* xfer_buff is not DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++)
-+ {
-+ dwc_write_reg32(data_fifo, get_unaligned(data_buff));
-+ }
-+ }
-+
-+ hc->xfer_count += byte_count;
-+ hc->xfer_buff += byte_count;
-+}
-+
-+/**
-+ * Gets the current USB frame number. This is the frame number from the last
-+ * SOF packet.
-+ */
-+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /* read current frame/microframe number from DSTS register */
-+ return dsts.b.soffn;
-+}
-+
-+/**
-+ * This function reads a setup packet from the Rx FIFO into the destination
-+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
-+ * Interrupt routine when a SETUP packet has been received in Slave mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for packet data.
-+ */
-+void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
-+{
-+ /* Get the 8 bytes of a setup transaction data */
-+
-+ /* Pop 2 DWORDS off the receive data FIFO into memory */
-+ dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
-+ dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
-+}
-+
-+
-+/**
-+ * This function enables EP0 OUT to receive SETUP packets and configures EP0
-+ * IN for transmitting packets. It is normally called when the
-+ * "Enumeration Done" interrupt occurs.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dsts_data_t dsts;
-+ depctl_data_t diepctl;
-+ depctl_data_t doepctl;
-+ dctl_data_t dctl = { .d32 = 0 };
-+
-+ /* Read the Device Status and Endpoint 0 Control registers */
-+ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
-+ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
-+ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-+
-+ /* Set the MPS of the IN EP based on the enumeration speed */
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
-+ break;
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
-+ break;
-+ }
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Enable OUT EP for receive */
-+ doepctl.b.epena = 1;
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+ dctl.b.cgnpinnak = 1;
-+
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-+}
-+
-+/**
-+ * This function activates an EP. The Device EP control register for
-+ * the EP is configured as defined in the ep structure. Note: This
-+ * function is not used for EP0.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to activate.
-+ */
-+void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t depctl;
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<ep->num;
-+ }
-+ else {
-+ addr = &dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<ep->num;
-+ }
-+
-+ /* If the EP is already active don't change the EP Control
-+ * register. */
-+ depctl.d32 = dwc_read_reg32(addr);
-+ if (!depctl.b.usbactep) {
-+ depctl.b.mps = ep->maxpacket;
-+ depctl.b.eptype = ep->type;
-+ depctl.b.txfnum = ep->tx_fifo_num;
-+
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ depctl.b.setd0pid = 1; // ???
-+ }
-+ else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ depctl.b.usbactep = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
-+ }
-+
-+ /* Enable the Interrupt for this EP */
-+ if(core_if->multiproc_int_enable) {
-+ if (ep->is_in == 1) {
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+ diepmsk.b.txfifoundrn = 1; //?????
-+
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+/*
-+ if(core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
-+
-+ } else {
-+ doepmsk_data_t doepmsk = { .d32 = 0};
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+ doepmsk.b.nak = 1;
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
-+ }
-+ dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
-+ 0, daintmsk.d32);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
-+ 0, daintmsk.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
-+
-+ ep->stall_clear_flag = 0;
-+ return;
-+}
-+
-+/**
-+ * This function deactivates an EP. This is done by clearing the USB Active
-+ * EP bit in the Device EP control register. Note: This function is not used
-+ * for EP0. EP0 cannot be deactivated.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to deactivate.
-+ */
-+void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = { .d32 = 0};
-+
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<ep->num;
-+ }
-+ else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<ep->num;
-+ }
-+
-+ depctl.b.usbactep = 0;
-+
-+ if(core_if->dma_desc_enable)
-+ depctl.b.epdis = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+
-+ /* Disable the Interrupt for this EP */
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
-+ daintmsk.d32, 0);
-+
-+ if (ep->is_in == 1) {
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
-+ } else {
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
-+ }
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
-+ daintmsk.d32, 0);
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dma_desc_t* dma_desc;
-+ uint32_t offset;
-+ uint32_t xfer_est;
-+ int i;
-+
-+ ep->desc_cnt = ( ep->total_len / ep->maxxfer) +
-+ ((ep->total_len % ep->maxxfer) ? 1 : 0);
-+ if(!ep->desc_cnt)
-+ ep->desc_cnt = 1;
-+
-+ dma_desc = ep->desc_addr;
-+ xfer_est = ep->total_len;
-+ offset = 0;
-+ for( i = 0; i < ep->desc_cnt; ++i) {
-+ /** DMA Descriptor Setup */
-+ if(xfer_est > ep->maxxfer) {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 0;
-+ dma_desc->status.b.ioc = 0;
-+ dma_desc->status.b.sp = 0;
-+ dma_desc->status.b.bytes = ep->maxxfer;
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ xfer_est -= ep->maxxfer;
-+ offset += ep->maxxfer;
-+ } else {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ if(ep->is_in) {
-+ dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
-+ 1 : ((ep->sent_zlp) ? 1 : 0);
-+ dma_desc->status.b.bytes = xfer_est;
-+ } else {
-+ dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
-+ }
-+
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+ }
-+ dma_desc ++;
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p\n",
-+ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ gtxstatus.d32 =
-+ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+
-+ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-+
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+
-+ /* Zero Length Packet? */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ }
-+
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ init_dma_desc_chain(core_if, ep);
-+ /** DIEPDMAn Register write */
-+ dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+
-+ }
-+ }
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-+ depctl.b.nextep = ep->num;
-+ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-+
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-+
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+
-+ /* Program the transfer size and packet count as follows:
-+ *
-+ * pktcnt = N
-+ * xfersize = N * maxpacket
-+ */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
-+ ep->num,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ init_dma_desc_chain(core_if, ep);
-+
-+ /** DOEPDMAn Register write */
-+ dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
-+ dwc_read_reg32(&out_regs->doepctl),
-+ dwc_read_reg32(&out_regs->doeptsiz));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&core_if->core_global_regs->gintmsk));
-+ }
-+}
-+
-+/**
-+ * This function setup a zero length transfer in Buffer DMA and
-+ * Slave modes for usb requests with zero field set
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-+
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
-+ depctl.b.nextep = ep->num;
-+ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-+
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-+
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for EP0 and starts
-+ * the transfer. For an IN transfer, the packets will be loaded into
-+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
-+ * unloaded from the Rx FIFO in the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p \n",
-+ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-+
-+ ep->total_len = ep->xfer_len;
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ gtxstatus.d32 =
-+ dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+
-+ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
-+ dwc_read_reg32(&in_regs->diepctl));
-+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
-+ deptsiz.d32,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
-+ gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Zero Length Packet? */
-+ if (ep->xfer_len == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ }
-+ else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ if (ep->xfer_len > ep->maxpacket) {
-+ ep->xfer_len = ep->maxpacket;
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ }
-+ else {
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ }
-+ deptsiz.b.pktcnt = 1;
-+
-+ }
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if(core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DIEPDMA0 Register write */
-+ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count as follows:
-+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
-+ * pktcnt = N */
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if(!core_if->dma_desc_enable) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-+ }
-+ }
-+ else {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function continues control IN transfers started by
-+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
-+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
-+ * bit for the packet count.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+ gnptxsts_data_t tx_status = { .d32 = 0 };
-+
-+ tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
-+ /** @todo Should there be check for room in the Tx
-+ * Status Queue. If not remove the code above this comment. */
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+
-+
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-+ (ep->total_len - ep->xfer_count);
-+ deptsiz.b.pktcnt = 1;
-+ if(core_if->dma_enable == 0) {
-+ ep->xfer_len += deptsiz.b.xfersize;
-+ } else {
-+ ep->xfer_len = deptsiz.b.xfersize;
-+ }
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ }
-+ else {
-+ ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
-+ (ep->total_len - ep->xfer_count);
-+
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DIEPDMA0 Register write */
-+ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if(core_if->dma_desc_enable == 0)
-+ dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ /* First clear it from GINTSTS */
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+
-+ }
-+ else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if(ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+
-+ if(core_if->dma_desc_enable == 0) {
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+ else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if(core_if->dma_desc_enable == 0)
-+ dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+#ifdef DEBUG
-+void dump_msg(const u8 *buf, unsigned int length)
-+{
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+ start = 0;
-+ while (length > 0) {
-+ num = min(length, 16u);
-+ p = line;
-+ for (i = 0; i < num; ++i)
-+ {
-+ if (i == 8)
-+ *p++ = ' ';
-+ sprintf(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ DWC_PRINT("%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+}
-+#else
-+static inline void dump_msg(const u8 *buf, unsigned int length)
-+{
-+}
-+#endif
-+
-+/**
-+ * This function writes a packet into the Tx FIFO associated with the
-+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
-+ * periodic EPs the periodic Tx FIFO associated with the EP is written
-+ * with all packets for the next micro-frame.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to write packet for.
-+ * @param dma Indicates if DMA is being used.
-+ */
-+void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
-+{
-+ /**
-+ * The buffer is padded to DWORD on a per packet basis in
-+ * slave/dma mode if the MPS is not DWORD aligned. The last
-+ * packet, if short, is also padded to a multiple of DWORD.
-+ *
-+ * ep->xfer_buff always starts DWORD aligned in memory and is a
-+ * multiple of DWORD in length
-+ *
-+ * ep->xfer_len can be any number of bytes
-+ *
-+ * ep->xfer_count is a multiple of ep->maxpacket until the last
-+ * packet
-+ *
-+ * FIFO access is DWORD */
-+
-+ uint32_t i;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+ uint32_t *fifo;
-+ uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
-+ if (ep->xfer_count >= ep->xfer_len) {
-+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
-+ return;
-+ }
-+
-+ /* Find the byte length of the packet either short packet or MPS */
-+ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
-+ byte_count = ep->xfer_len - ep->xfer_count;
-+ }
-+ else {
-+ byte_count = ep->maxpacket;
-+ }
-+
-+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
-+ * is not a multiple of DWORD */
-+ dword_count = (byte_count + 3) / 4;
-+
-+#ifdef VERBOSE
-+ dump_msg(ep->xfer_buff, byte_count);
-+#endif
-+
-+ /**@todo NGS Where are the Periodic Tx FIFO addresses
-+ * intialized? What should this be? */
-+
-+ fifo = core_if->data_fifo[ep->num];
-+
-+
-+ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
-+
-+ if (!dma) {
-+ for (i=0; i<dword_count; i++, data_buff++) {
-+ dwc_write_reg32(fifo, *data_buff);
-+ }
-+ }
-+
-+ ep->xfer_count += byte_count;
-+ ep->xfer_buff += byte_count;
-+ ep->dma_addr += byte_count;
-+}
-+
-+/**
-+ * Set the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to set the stall on.
-+ */
-+void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"in":"out"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ }
-+ else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the stall bit */
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-+
-+ return;
-+}
-+
-+/**
-+ * Clear the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to clear stall from.
-+ */
-+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in?"IN":"OUT"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ }
-+ else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* clear the stall bits */
-+ depctl.b.stall = 0;
-+
-+ /*
-+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
-+ * of whether an endpoint has the Halt feature set, a
-+ * ClearFeature(ENDPOINT_HALT) request always results in the
-+ * data toggle being reinitialized to DATA0.
-+ */
-+ if (ep->type == DWC_OTG_EP_TYPE_INTR ||
-+ ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ depctl.b.setd0pid = 1; /* DATA0 */
-+ }
-+
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-+ return;
-+}
-+
-+/**
-+ * This function reads a packet from the Rx FIFO into the destination
-+ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for the packet.
-+ * @param bytes Number of bytes to copy to the destination.
-+ */
-+void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-+ uint8_t *dest,
-+ uint16_t bytes)
-+{
-+ int i;
-+ int word_count = (bytes + 3) / 4;
-+
-+ volatile uint32_t *fifo = core_if->data_fifo[0];
-+ uint32_t *data_buff = (uint32_t *)dest;
-+
-+ /**
-+ * @todo Account for the case where _dest is not dword aligned. This
-+ * requires reading data from the FIFO into a uint32_t temp buffer,
-+ * then moving it into the data buffer.
-+ */
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
-+ core_if, dest, bytes);
-+
-+ for (i=0; i<word_count; i++, data_buff++)
-+ {
-+ *data_buff = dwc_read_reg32(fifo);
-+ }
-+
-+ return;
-+}
-+
-+
-+
-+/**
-+ * This functions reads the device registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Device Global Registers\n");
-+ addr=&core_if->dev_if->dev_global_regs->dcfg;
-+ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dctl;
-+ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dsts;
-+ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->diepmsk;
-+ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->doepmsk;
-+ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->daint;
-+ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->daintmsk;
-+ DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr1;
-+ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr2;
-+ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+ addr=&core_if->dev_if->dev_global_regs->dvbusdis;
-+ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
-+ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
-+ DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n",
-+ (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+/*
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+*/
-+ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
-+
-+ addr=&core_if->dev_if->dev_global_regs->deachint;
-+ DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->dev_global_regs->deachintmsk;
-+ DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-+ addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
-+ DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+
-+
-+ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-+ addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
-+ DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+
-+ for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
-+ DWC_PRINT("Device IN EP %d Registers\n", i);
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
-+ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepint;
-+ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
-+ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
-+ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
-+ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
-+ DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+
-+ for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
-+ DWC_PRINT("Device OUT EP %d Registers\n", i);
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
-+ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
-+ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepint;
-+ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
-+ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
-+ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
-+ DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ }
-+
-+
-+
-+ return;
-+}
-+
-+/**
-+ * This functions reads the SPRAM and prints its content
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
-+{
-+ volatile uint8_t *addr, *start_addr, *end_addr;
-+
-+ DWC_PRINT("SPRAM Data:\n");
-+ start_addr = (void*)core_if->core_global_regs;
-+ DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
-+ start_addr += 0x00028000;
-+ end_addr=(void*)core_if->core_global_regs;
-+ end_addr += 0x000280e0;
-+
-+ for(addr = start_addr; addr < end_addr; addr+=16)
-+ {
-+ DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
-+ addr[0],
-+ addr[1],
-+ addr[2],
-+ addr[3],
-+ addr[4],
-+ addr[5],
-+ addr[6],
-+ addr[7],
-+ addr[8],
-+ addr[9],
-+ addr[10],
-+ addr[11],
-+ addr[12],
-+ addr[13],
-+ addr[14],
-+ addr[15]
-+ );
-+ }
-+
-+ return;
-+}
-+/**
-+ * This function reads the host registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Host Global Registers\n");
-+ addr=&core_if->host_if->host_global_regs->hcfg;
-+ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hfir;
-+ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hfnum;
-+ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->hptxsts;
-+ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->haint;
-+ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->host_global_regs->haintmsk;
-+ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=core_if->host_if->hprt0;
-+ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<core_if->core_params->host_channels; i++)
-+ {
-+ DWC_PRINT("Host Channel %d Specific Registers\n", i);
-+ addr=&core_if->host_if->hc_regs[i]->hcchar;
-+ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcsplt;
-+ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcint;
-+ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcintmsk;
-+ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hctsiz;
-+ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->host_if->hc_regs[i]->hcdma;
-+ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+ return;
-+}
-+
-+/**
-+ * This function reads the core global registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Core Global Registers\n");
-+ addr=&core_if->core_global_regs->gotgctl;
-+ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gotgint;
-+ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gahbcfg;
-+ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gusbcfg;
-+ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grstctl;
-+ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gintsts;
-+ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gintmsk;
-+ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grxstsr;
-+ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ //addr=&core_if->core_global_regs->grxstsp;
-+ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->grxfsiz;
-+ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gnptxfsiz;
-+ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gnptxsts;
-+ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gi2cctl;
-+ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gpvndctl;
-+ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ggpio;
-+ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->guid;
-+ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->gsnpsid;
-+ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg1;
-+ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg2;
-+ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg3;
-+ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->ghwcfg4;
-+ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&core_if->core_global_regs->hptxfsiz;
-+ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
-+ DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+}
-+
-+/**
-+ * Flush a Tx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param num Tx FIFO to flush.
-+ */
-+void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
-+ const int num)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
-+
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = num;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-+ __func__, greset.d32,
-+ dwc_read_reg32(&global_regs->gnptxsts));
-+ break;
-+ }
-+ }
-+ while (greset.b.txfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Flush Rx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-+ /*
-+ *
-+ */
-+ greset.b.rxfflsh = 1;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ }
-+ while (greset.b.rxfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Do core a soft reset of the core. Be careful with this because it
-+ * resets all the internal state machines of the core.
-+ */
-+void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
-+ /* Wait for AHB master IDLE state. */
-+ do {
-+ UDELAY(10);
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 100000) {
-+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ return;
-+ }
-+ }
-+ while (greset.b.ahbidle == 0);
-+
-+ /* Core Soft Reset */
-+ count = 0;
-+ greset.b.csftrst = 1;
-+ dwc_write_reg32(&global_regs->grstctl, greset.d32);
-+ do {
-+ greset.d32 = dwc_read_reg32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ }
-+ while (greset.b.csftrst == 1);
-+
-+ /* Wait for 3 PHY Clocks*/
-+ MDELAY(100);
-+}
-+
-+
-+
-+/**
-+ * Register HCD callbacks. The callbacks are used to start and stop
-+ * the HCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the HCD callback structure.
-+ * @param p pointer to be passed to callback function (usb_hcd*).
-+ */
-+void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
-+ dwc_otg_cil_callbacks_t *cb,
-+ void *p)
-+{
-+ core_if->hcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+/**
-+ * Register PCD callbacks. The callbacks are used to start and stop
-+ * the PCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the PCD callback structure.
-+ * @param p pointer to be passed to callback function (pcd*).
-+ */
-+void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
-+ dwc_otg_cil_callbacks_t *cb,
-+ void *p)
-+{
-+ core_if->pcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function writes isoc data per 1 (micro)frame into tx fifo
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0};
-+ uint32_t len = 0;
-+ uint32_t dwords;
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[ep->num];
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->xfer_count < ep->xfer_len &&
-+ ep->xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, ep, 0);
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
-+ }
-+}
-+
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ depctl_data_t depctl = { .d32 = 0 };
-+ dsts_data_t dsts = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if(ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff = ep->cur_pkt_addr;
-+ ep->dma_addr = ep->cur_pkt_dma_addr;
-+
-+ if(ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ deptsiz.b.mc = deptsiz.b.pktcnt;
-+ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-+ }
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-+
-+ if (core_if->dma_enable) {
-+ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
-+ (uint32_t)ep->dma_addr);
-+ }
-+ }
-+
-+
-+ /** Enable endpoint, clear nak */
-+
-+ depctl.d32 = 0;
-+ if(ep->bInterval == 1) {
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+ ep->next_frame = dsts.b.soffn + ep->bInterval;
-+
-+ if(ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ } else {
-+ ep->next_frame += ep->bInterval;
-+
-+ if(ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, 0, depctl.d32);
-+ depctl.d32 = dwc_read_reg32(addr);
-+
-+ if(ep->is_in && core_if->dma_enable == 0) {
-+ write_isoc_frame_data(core_if, ep);
-+ }
-+
-+}
-+
-+#endif //DWC_EN_ISOC
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
-@@ -0,0 +1,1098 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1099526 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_CIL_H__)
-+#define __DWC_CIL_H__
-+
-+#include <linux/workqueue.h>
-+#include <linux/version.h>
-+#include <asm/param.h>
-+
-+#include "linux/dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#ifdef DEBUG
-+#include "linux/timer.h"
-+#endif
-+
-+/**
-+ * @file
-+ * This file contains the interface to the Core Interface Layer.
-+ */
-+
-+
-+/** Macros defined for DWC OTG HW Release verison */
-+#define OTG_CORE_REV_2_00 0x4F542000
-+#define OTG_CORE_REV_2_60a 0x4F54260A
-+#define OTG_CORE_REV_2_71a 0x4F54271A
-+#define OTG_CORE_REV_2_72a 0x4F54272A
-+
-+/**
-+*/
-+typedef struct iso_pkt_info
-+{
-+ uint32_t offset;
-+ uint32_t length;
-+ int32_t status;
-+} iso_pkt_info_t;
-+/**
-+ * The <code>dwc_ep</code> structure represents the state of a single
-+ * endpoint when acting in device mode. It contains the data items
-+ * needed for an endpoint to be activated and transfer packets.
-+ */
-+typedef struct dwc_ep
-+{
-+ /** EP number used for register address lookup */
-+ uint8_t num;
-+ /** EP direction 0 = OUT */
-+ unsigned is_in : 1;
-+ /** EP active. */
-+ unsigned active : 1;
-+
-+ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
-+ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
-+ unsigned tx_fifo_num : 4;
-+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
-+ unsigned type : 2;
-+#define DWC_OTG_EP_TYPE_CONTROL 0
-+#define DWC_OTG_EP_TYPE_ISOC 1
-+#define DWC_OTG_EP_TYPE_BULK 2
-+#define DWC_OTG_EP_TYPE_INTR 3
-+
-+ /** DATA start PID for INTR and BULK EP */
-+ unsigned data_pid_start : 1;
-+ /** Frame (even/odd) for ISOC EP */
-+ unsigned even_odd_frame : 1;
-+ /** Max Packet bytes */
-+ unsigned maxpacket : 11;
-+
-+ /** Max Transfer size */
-+ unsigned maxxfer : 16;
-+
-+ /** @name Transfer state */
-+ /** @{ */
-+
-+ /**
-+ * Pointer to the beginning of the transfer buffer -- do not modify
-+ * during transfer.
-+ */
-+
-+ uint32_t dma_addr;
-+
-+ uint32_t dma_desc_addr;
-+ dwc_otg_dma_desc_t* desc_addr;
-+
-+
-+ uint8_t *start_xfer_buff;
-+ /** pointer to the transfer buffer */
-+ uint8_t *xfer_buff;
-+ /** Number of bytes to transfer */
-+ unsigned xfer_len : 19;
-+ /** Number of bytes transferred. */
-+ unsigned xfer_count : 19;
-+ /** Sent ZLP */
-+ unsigned sent_zlp : 1;
-+ /** Total len for control transfer */
-+ unsigned total_len : 19;
-+
-+ /** stall clear flag */
-+ unsigned stall_clear_flag : 1;
-+
-+ /** Allocated DMA Desc count */
-+ uint32_t desc_cnt;
-+
-+#ifdef DWC_EN_ISOC
-+ /**
-+ * Variables specific for ISOC EPs
-+ *
-+ */
-+ /** DMA addresses of ISOC buffers */
-+ uint32_t dma_addr0;
-+ uint32_t dma_addr1;
-+
-+ uint32_t iso_dma_desc_addr;
-+ dwc_otg_dma_desc_t* iso_desc_addr;
-+
-+ /** pointer to the transfer buffers */
-+ uint8_t *xfer_buff0;
-+ uint8_t *xfer_buff1;
-+
-+ /** number of ISOC Buffer is processing */
-+ uint32_t proc_buf_num;
-+ /** Interval of ISOC Buffer processing */
-+ uint32_t buf_proc_intrvl;
-+ /** Data size for regular frame */
-+ uint32_t data_per_frame;
-+
-+ /* todo - pattern data support is to be implemented in the future */
-+ /** Data size for pattern frame */
-+ uint32_t data_pattern_frame;
-+ /** Frame number of pattern data */
-+ uint32_t sync_frame;
-+
-+ /** bInterval */
-+ uint32_t bInterval;
-+ /** ISO Packet number per frame */
-+ uint32_t pkt_per_frm;
-+ /** Next frame num for which will be setup DMA Desc */
-+ uint32_t next_frame;
-+ /** Number of packets per buffer processing */
-+ uint32_t pkt_cnt;
-+ /** Info for all isoc packets */
-+ iso_pkt_info_t *pkt_info;
-+ /** current pkt number */
-+ uint32_t cur_pkt;
-+ /** current pkt number */
-+ uint8_t *cur_pkt_addr;
-+ /** current pkt number */
-+ uint32_t cur_pkt_dma_addr;
-+#endif //DWC_EN_ISOC
-+/** @} */
-+} dwc_ep_t;
-+
-+/*
-+ * Reasons for halting a host channel.
-+ */
-+typedef enum dwc_otg_halt_status
-+{
-+ DWC_OTG_HC_XFER_NO_HALT_STATUS,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ DWC_OTG_HC_XFER_URB_COMPLETE,
-+ DWC_OTG_HC_XFER_ACK,
-+ DWC_OTG_HC_XFER_NAK,
-+ DWC_OTG_HC_XFER_NYET,
-+ DWC_OTG_HC_XFER_STALL,
-+ DWC_OTG_HC_XFER_XACT_ERR,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN,
-+ DWC_OTG_HC_XFER_BABBLE_ERR,
-+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
-+ DWC_OTG_HC_XFER_AHB_ERR,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE
-+} dwc_otg_halt_status_e;
-+
-+/**
-+ * Host channel descriptor. This structure represents the state of a single
-+ * host channel when acting in host mode. It contains the data items needed to
-+ * transfer packets to an endpoint via a host channel.
-+ */
-+typedef struct dwc_hc
-+{
-+ /** Host channel number used for register address lookup */
-+ uint8_t hc_num;
-+
-+ /** Device to access */
-+ unsigned dev_addr : 7;
-+
-+ /** EP to access */
-+ unsigned ep_num : 4;
-+
-+ /** EP direction. 0: OUT, 1: IN */
-+ unsigned ep_is_in : 1;
-+
-+ /**
-+ * EP speed.
-+ * One of the following values:
-+ * - DWC_OTG_EP_SPEED_LOW
-+ * - DWC_OTG_EP_SPEED_FULL
-+ * - DWC_OTG_EP_SPEED_HIGH
-+ */
-+ unsigned speed : 2;
-+#define DWC_OTG_EP_SPEED_LOW 0
-+#define DWC_OTG_EP_SPEED_FULL 1
-+#define DWC_OTG_EP_SPEED_HIGH 2
-+
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - DWC_OTG_EP_TYPE_CONTROL: 0
-+ * - DWC_OTG_EP_TYPE_ISOC: 1
-+ * - DWC_OTG_EP_TYPE_BULK: 2
-+ * - DWC_OTG_EP_TYPE_INTR: 3
-+ */
-+ unsigned ep_type : 2;
-+
-+ /** Max packet size in bytes */
-+ unsigned max_packet : 11;
-+
-+ /**
-+ * PID for initial transaction.
-+ * 0: DATA0,<br>
-+ * 1: DATA2,<br>
-+ * 2: DATA1,<br>
-+ * 3: MDATA (non-Control EP),
-+ * SETUP (Control EP)
-+ */
-+ unsigned data_pid_start : 2;
-+#define DWC_OTG_HC_PID_DATA0 0
-+#define DWC_OTG_HC_PID_DATA2 1
-+#define DWC_OTG_HC_PID_DATA1 2
-+#define DWC_OTG_HC_PID_MDATA 3
-+#define DWC_OTG_HC_PID_SETUP 3
-+
-+ /** Number of periodic transactions per (micro)frame */
-+ unsigned multi_count: 2;
-+
-+ /** @name Transfer State */
-+ /** @{ */
-+
-+ /** Pointer to the current transfer buffer position. */
-+ uint8_t *xfer_buff;
-+ /** Total number of bytes to transfer. */
-+ uint32_t xfer_len;
-+ /** Number of bytes transferred so far. */
-+ uint32_t xfer_count;
-+ /** Packet count at start of transfer.*/
-+ uint16_t start_pkt_count;
-+
-+ /**
-+ * Flag to indicate whether the transfer has been started. Set to 1 if
-+ * it has been started, 0 otherwise.
-+ */
-+ uint8_t xfer_started;
-+
-+ /**
-+ * Set to 1 to indicate that a PING request should be issued on this
-+ * channel. If 0, process normally.
-+ */
-+ uint8_t do_ping;
-+
-+ /**
-+ * Set to 1 to indicate that the error count for this transaction is
-+ * non-zero. Set to 0 if the error count is 0.
-+ */
-+ uint8_t error_state;
-+
-+ /**
-+ * Set to 1 to indicate that this channel should be halted the next
-+ * time a request is queued for the channel. This is necessary in
-+ * slave mode if no request queue space is available when an attempt
-+ * is made to halt the channel.
-+ */
-+ uint8_t halt_on_queue;
-+
-+ /**
-+ * Set to 1 if the host channel has been halted, but the core is not
-+ * finished flushing queued requests. Otherwise 0.
-+ */
-+ uint8_t halt_pending;
-+
-+ /**
-+ * Reason for halting the host channel.
-+ */
-+ dwc_otg_halt_status_e halt_status;
-+
-+ /*
-+ * Split settings for the host channel
-+ */
-+ uint8_t do_split; /**< Enable split for the channel */
-+ uint8_t complete_split; /**< Enable complete split */
-+ uint8_t hub_addr; /**< Address of high speed hub */
-+
-+ uint8_t port_addr; /**< Port of the low/full speed device */
-+ /** Split transaction position
-+ * One of the following values:
-+ * - DWC_HCSPLIT_XACTPOS_MID
-+ * - DWC_HCSPLIT_XACTPOS_BEGIN
-+ * - DWC_HCSPLIT_XACTPOS_END
-+ * - DWC_HCSPLIT_XACTPOS_ALL */
-+ uint8_t xact_pos;
-+
-+ /** Set when the host channel does a short read. */
-+ uint8_t short_read;
-+
-+ /**
-+ * Number of requests issued for this channel since it was assigned to
-+ * the current transfer (not counting PINGs).
-+ */
-+ uint8_t requests;
-+
-+ /**
-+ * Queue Head for the transfer being processed by this channel.
-+ */
-+ struct dwc_otg_qh *qh;
-+
-+ /** @} */
-+
-+ /** Entry in list of host channels. */
-+ struct list_head hc_list_entry;
-+} dwc_hc_t;
-+
-+/**
-+ * The following parameters may be specified when starting the module. These
-+ * parameters define how the DWC_otg controller should be configured.
-+ * Parameter values are passed to the CIL initialization function
-+ * dwc_otg_cil_init.
-+ */
-+typedef struct dwc_otg_core_params
-+{
-+ int32_t opt;
-+#define dwc_param_opt_default 1
-+
-+ /**
-+ * Specifies the OTG capabilities. The driver will automatically
-+ * detect the value for this parameter if none is specified.
-+ * 0 - HNP and SRP capable (default)
-+ * 1 - SRP Only capable
-+ * 2 - No HNP/SRP capable
-+ */
-+ int32_t otg_cap;
-+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-+
-+ /**
-+ * Specifies whether to use slave or DMA mode for accessing the data
-+ * FIFOs. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - Slave
-+ * 1 - DMA (default, if available)
-+ */
-+ int32_t dma_enable;
-+#define dwc_param_dma_enable_default 1
-+
-+ /**
-+ * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data
-+ * FIFOs in device mode. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - address DMA
-+ * 1 - DMA Descriptor(default, if available)
-+ */
-+ int32_t dma_desc_enable;
-+#define dwc_param_dma_desc_enable_default 0
-+ /** The DMA Burst size (applicable only for External DMA
-+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ */
-+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-+#define dwc_param_dma_burst_size_default 32
-+
-+ /**
-+ * Specifies the maximum speed of operation in host and device mode.
-+ * The actual speed depends on the speed of the attached device and
-+ * the value of phy_type. The actual speed depends on the speed of the
-+ * attached device.
-+ * 0 - High Speed (default)
-+ * 1 - Full Speed
-+ */
-+ int32_t speed;
-+#define dwc_param_speed_default 0
-+#define DWC_SPEED_PARAM_HIGH 0
-+#define DWC_SPEED_PARAM_FULL 1
-+
-+ /** Specifies whether low power mode is supported when attached
-+ * to a Full Speed or Low Speed device in host mode.
-+ * 0 - Don't support low power mode (default)
-+ * 1 - Support low power mode
-+ */
-+ int32_t host_support_fs_ls_low_power;
-+#define dwc_param_host_support_fs_ls_low_power_default 0
-+
-+ /** Specifies the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. This parameter is applicable only if
-+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
-+ * then defaults to 6 MHZ otherwise 48 MHZ.
-+ *
-+ * 0 - 48 MHz
-+ * 1 - 6 MHz
-+ */
-+ int32_t host_ls_low_power_phy_clk;
-+#define dwc_param_host_ls_low_power_phy_clk_default 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-+
-+ /**
-+ * 0 - Use cC FIFO size parameters
-+ * 1 - Allow dynamic FIFO sizing (default)
-+ */
-+ int32_t enable_dynamic_fifo;
-+#define dwc_param_enable_dynamic_fifo_default 1
-+
-+ /** Total number of 4-byte words in the data FIFO memory. This
-+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ * Tx FIFOs.
-+ * 32 to 32768 (default 8192)
-+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ */
-+ int32_t data_fifo_size;
-+#define dwc_param_data_fifo_size_default 8192
-+
-+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1064)
-+ */
-+ int32_t dev_rx_fifo_size;
-+#define dwc_param_dev_rx_fifo_size_default 1064
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-+ * when dynamic FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t dev_nperio_tx_fifo_size;
-+#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-+
-+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+#define dwc_param_dev_perio_tx_fifo_size_default 256
-+
-+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_rx_fifo_size;
-+#define dwc_param_host_rx_fifo_size_default 1024
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-+ * when Dynamic FIFO sizing is enabled in the core.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_nperio_tx_fifo_size;
-+#define dwc_param_host_nperio_tx_fifo_size_default 1024
-+
-+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_perio_tx_fifo_size;
-+#define dwc_param_host_perio_tx_fifo_size_default 1024
-+
-+ /** The maximum transfer size supported in bytes.
-+ * 2047 to 65,535 (default 65,535)
-+ */
-+ int32_t max_transfer_size;
-+#define dwc_param_max_transfer_size_default 65535
-+
-+ /** The maximum number of packets in a transfer.
-+ * 15 to 511 (default 511)
-+ */
-+ int32_t max_packet_count;
-+#define dwc_param_max_packet_count_default 511
-+
-+ /** The number of host channel registers to use.
-+ * 1 to 16 (default 12)
-+ * Note: The FPGA configuration supports a maximum of 12 host channels.
-+ */
-+ int32_t host_channels;
-+#define dwc_param_host_channels_default 12
-+
-+ /** The number of endpoints in addition to EP0 available for device
-+ * mode operations.
-+ * 1 to 15 (default 6 IN and OUT)
-+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-+ * endpoints in addition to EP0.
-+ */
-+ int32_t dev_endpoints;
-+#define dwc_param_dev_endpoints_default 6
-+
-+ /**
-+ * Specifies the type of PHY interface to use. By default, the driver
-+ * will automatically detect the phy_type.
-+ *
-+ * 0 - Full Speed PHY
-+ * 1 - UTMI+ (default)
-+ * 2 - ULPI
-+ */
-+ int32_t phy_type;
-+#define DWC_PHY_TYPE_PARAM_FS 0
-+#define DWC_PHY_TYPE_PARAM_UTMI 1
-+#define DWC_PHY_TYPE_PARAM_ULPI 2
-+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-+
-+ /**
-+ * Specifies the UTMI+ Data Width. This parameter is
-+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-+ * PHY_TYPE, this parameter indicates the data width between
-+ * the MAC and the ULPI Wrapper.) Also, this parameter is
-+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-+ * to "8 and 16 bits", meaning that the core has been
-+ * configured to work at either data path width.
-+ *
-+ * 8 or 16 bits (default 16)
-+ */
-+ int32_t phy_utmi_width;
-+#define dwc_param_phy_utmi_width_default 16
-+
-+ /**
-+ * Specifies whether the ULPI operates at double or single
-+ * data rate. This parameter is only applicable if PHY_TYPE is
-+ * ULPI.
-+ *
-+ * 0 - single data rate ULPI interface with 8 bit wide data
-+ * bus (default)
-+ * 1 - double data rate ULPI interface with 4 bit wide data
-+ * bus
-+ */
-+ int32_t phy_ulpi_ddr;
-+#define dwc_param_phy_ulpi_ddr_default 0
-+
-+ /**
-+ * Specifies whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy.
-+ */
-+ int32_t phy_ulpi_ext_vbus;
-+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-+
-+ /**
-+ * Specifies whether to use the I2Cinterface for full speed PHY. This
-+ * parameter is only applicable if PHY_TYPE is FS.
-+ * 0 - No (default)
-+ * 1 - Yes
-+ */
-+ int32_t i2c_enable;
-+#define dwc_param_i2c_enable_default 0
-+
-+ int32_t ulpi_fs_ls;
-+#define dwc_param_ulpi_fs_ls_default 0
-+
-+ int32_t ts_dline;
-+#define dwc_param_ts_dline_default 0
-+
-+ /**
-+ * Specifies whether dedicated transmit FIFOs are
-+ * enabled for non periodic IN endpoints in device mode
-+ * 0 - No
-+ * 1 - Yes
-+ */
-+ int32_t en_multiple_tx_fifo;
-+#define dwc_param_en_multiple_tx_fifo_default 1
-+
-+ /** Number of 4-byte words in each of the Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-+#define dwc_param_dev_tx_fifo_size_default 256
-+
-+ /** Thresholding enable flag-
-+ * bit 0 - enable non-ISO Tx thresholding
-+ * bit 1 - enable ISO Tx thresholding
-+ * bit 2 - enable Rx thresholding
-+ */
-+ uint32_t thr_ctl;
-+#define dwc_param_thr_ctl_default 0
-+
-+ /** Thresholding length for Tx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t tx_thr_length;
-+#define dwc_param_tx_thr_length_default 64
-+
-+ /** Thresholding length for Rx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t rx_thr_length;
-+#define dwc_param_rx_thr_length_default 64
-+
-+ /** Per Transfer Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ uint32_t pti_enable;
-+#define dwc_param_pti_enable_default 0
-+
-+ /** Molti Processor Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ uint32_t mpi_enable;
-+#define dwc_param_mpi_enable_default 0
-+
-+} dwc_otg_core_params_t;
-+
-+#ifdef DEBUG
-+struct dwc_otg_core_if;
-+typedef struct hc_xfer_info
-+{
-+ struct dwc_otg_core_if *core_if;
-+ dwc_hc_t *hc;
-+} hc_xfer_info_t;
-+#endif
-+
-+/**
-+ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
-+ * the DWC_otg controller acting in either host or device mode. It
-+ * represents the programming view of the controller as a whole.
-+ */
-+typedef struct dwc_otg_core_if
-+{
-+ /** Parameters that define how the core should be configured.*/
-+ dwc_otg_core_params_t *core_params;
-+
-+ /** Core Global registers starting at offset 000h. */
-+ dwc_otg_core_global_regs_t *core_global_regs;
-+
-+ /** Device-specific information */
-+ dwc_otg_dev_if_t *dev_if;
-+ /** Host-specific information */
-+ dwc_otg_host_if_t *host_if;
-+
-+ /** Value from SNPSID register */
-+ uint32_t snpsid;
-+
-+ /*
-+ * Set to 1 if the core PHY interface bits in USBCFG have been
-+ * initialized.
-+ */
-+ uint8_t phy_init_done;
-+
-+ /*
-+ * SRP Success flag, set by srp success interrupt in FS I2C mode
-+ */
-+ uint8_t srp_success;
-+ uint8_t srp_timer_started;
-+
-+ /* Common configuration information */
-+ /** Power and Clock Gating Control Register */
-+ volatile uint32_t *pcgcctl;
-+#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-+
-+ /** Push/pop addresses for endpoints or host channels.*/
-+ uint32_t *data_fifo[MAX_EPS_CHANNELS];
-+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-+#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-+
-+ /** Total RAM for FIFOs (Bytes) */
-+ uint16_t total_fifo_size;
-+ /** Size of Rx FIFO (Bytes) */
-+ uint16_t rx_fifo_size;
-+ /** Size of Non-periodic Tx FIFO (Bytes) */
-+ uint16_t nperio_tx_fifo_size;
-+
-+
-+ /** 1 if DMA is enabled, 0 otherwise. */
-+ uint8_t dma_enable;
-+
-+ /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */
-+ uint8_t dma_desc_enable;
-+
-+ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t pti_enh_enable;
-+
-+ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t multiproc_int_enable;
-+
-+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
-+ uint8_t en_multiple_tx_fifo;
-+
-+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
-+ * process of being queued */
-+ uint8_t queuing_high_bandwidth;
-+
-+ /** Hardware Configuration -- stored here for convenience.*/
-+ hwcfg1_data_t hwcfg1;
-+ hwcfg2_data_t hwcfg2;
-+ hwcfg3_data_t hwcfg3;
-+ hwcfg4_data_t hwcfg4;
-+
-+ /** Host and Device Configuration -- stored here for convenience.*/
-+ hcfg_data_t hcfg;
-+ dcfg_data_t dcfg;
-+
-+ /** The operational State, during transations
-+ * (a_host>>a_peripherial and b_device=>b_host) this may not
-+ * match the core but allows the software to determine
-+ * transitions.
-+ */
-+ uint8_t op_state;
-+
-+ /**
-+ * Set to 1 if the HCD needs to be restarted on a session request
-+ * interrupt. This is required if no connector ID status change has
-+ * occurred since the HCD was last disconnected.
-+ */
-+ uint8_t restart_hcd_on_session_req;
-+
-+ /** HCD callbacks */
-+ /** A-Device is a_host */
-+#define A_HOST (1)
-+ /** A-Device is a_suspend */
-+#define A_SUSPEND (2)
-+ /** A-Device is a_peripherial */
-+#define A_PERIPHERAL (3)
-+ /** B-Device is operating as a Peripheral. */
-+#define B_PERIPHERAL (4)
-+ /** B-Device is operating as a Host. */
-+#define B_HOST (5)
-+
-+ /** HCD callbacks */
-+ struct dwc_otg_cil_callbacks *hcd_cb;
-+ /** PCD callbacks */
-+ struct dwc_otg_cil_callbacks *pcd_cb;
-+
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t p_tx_msk;
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t tx_msk;
-+
-+ /** Workqueue object used for handling several interrupts */
-+ struct workqueue_struct *wq_otg;
-+
-+ /** Work object used for handling "Connector ID Status Change" Interrupt */
-+ struct work_struct w_conn_id;
-+
-+ /** Work object used for handling "Wakeup Detected" Interrupt */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct work_struct w_wkp;
-+#else
-+ struct delayed_work w_wkp;
-+#endif
-+
-+#ifdef DEBUG
-+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-+
-+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
-+ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
-+
-+ uint32_t hfnum_7_samples;
-+ uint64_t hfnum_7_frrem_accum;
-+ uint32_t hfnum_0_samples;
-+ uint64_t hfnum_0_frrem_accum;
-+ uint32_t hfnum_other_samples;
-+ uint64_t hfnum_other_frrem_accum;
-+#endif
-+
-+
-+} dwc_otg_core_if_t;
-+
-+/*We must clear S3C24XX_EINTPEND external interrupt register
-+ * because after clearing in this register trigerred IRQ from
-+ * H/W core in kernel interrupt can be occured again before OTG
-+ * handlers clear all IRQ sources of Core registers because of
-+ * timing latencies and Low Level IRQ Type.
-+ */
-+
-+#ifdef CONFIG_MACH_IPMATE
-+#define S3C2410X_CLEAR_EINTPEND() \
-+do { \
-+ if (!dwc_otg_read_core_intr(core_if)) { \
-+ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \
-+ } \
-+} while (0)
-+#else
-+#define S3C2410X_CLEAR_EINTPEND() do { } while (0)
-+#endif
-+
-+/*
-+ * The following functions are functions for works
-+ * using during handling some interrupts
-+ */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+extern void w_conn_id_status_change(void *p);
-+extern void w_wakeup_detected(void *p);
-+
-+#else
-+
-+extern void w_conn_id_status_change(struct work_struct *p);
-+extern void w_wakeup_detected(struct work_struct *p);
-+
-+#endif
-+
-+
-+/*
-+ * The following functions support initialization of the CIL driver component
-+ * and the DWC_otg controller.
-+ */
-+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
-+ dwc_otg_core_params_t *_core_params);
-+extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+
-+/** @name Device CIL Functions
-+ * The following functions support managing the DWC_otg controller in device
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if);
-+#ifdef DWC_EN_ISOC
-+extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-+extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep);
-+#endif //DWC_EN_ISOC
-+/**@}*/
-+
-+/** @name Host CIL Functions
-+ * The following functions support managing the DWC_otg controller in host
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
-+ dwc_hc_t *_hc,
-+ dwc_otg_halt_status_e _halt_status);
-+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+
-+/**
-+ * This function Reads HPRT0 in preparation to modify. It keeps the
-+ * WC bits 0 so that if they are read as 1, they won't clear when you
-+ * write it back
-+ */
-+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtconndet = 0;
-+ hprt0.b.prtenchng = 0;
-+ hprt0.b.prtovrcurrchng = 0;
-+ return hprt0.d32;
-+}
-+
-+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-+/**@}*/
-+
-+/** @name Common CIL Functions
-+ * The following functions support managing the DWC_otg controller in either
-+ * device or host mode.
-+ */
-+/**@{*/
-+
-+extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-+ uint8_t *dest,
-+ uint16_t bytes);
-+
-+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-+
-+extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
-+ const int _num );
-+extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-+
-+extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count);
-+extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count);
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
-+ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function returns the OTG Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the IN endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t v;
-+
-+ if(core_if->multiproc_int_enable) {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+ return (v & 0xffff);
-+
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the OUT endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t v;
-+
-+ if(core_if->multiproc_int_enable) {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+
-+ return ((v & 0xffff0000) >> 16);
-+}
-+
-+/**
-+ * This function returns the Device IN EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if,
-+ dwc_ep_t *ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ uint32_t v, msk, emp;
-+
-+ if(core_if->multiproc_int_enable) {
-+ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]);
-+ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ } else {
-+ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-+ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ }
-+
-+
-+ return v;
-+}
-+/**
-+ * This function returns the Device OUT EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
-+ dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v;
-+ doepmsk_data_t msk = { .d32 = 0 };
-+
-+ if(_core_if->multiproc_int_enable) {
-+ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]);
-+ if(_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ } else {
-+ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
-+ if(_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ }
-+ return v;
-+}
-+
-+/**
-+ * This function returns the Host All Channel Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-+}
-+
-+static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-+}
-+
-+
-+/**
-+ * This function returns the mode of the operation, host or device.
-+ *
-+ * @return 0 - Device Mode, 1 - Host Mode
-+ */
-+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-+}
-+
-+static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-+}
-+static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-+}
-+
-+extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-+
-+
-+/**@}*/
-+
-+/**
-+ * DWC_otg CIL callback structure. This structure allows the HCD and
-+ * PCD to register functions used for starting and stopping the PCD
-+ * and HCD for role change on for a DRD.
-+ */
-+typedef struct dwc_otg_cil_callbacks
-+{
-+ /** Start function for role change */
-+ int (*start) (void *_p);
-+ /** Stop Function for role change */
-+ int (*stop) (void *_p);
-+ /** Disconnect Function for role change */
-+ int (*disconnect) (void *_p);
-+ /** Resume/Remote wakeup Function */
-+ int (*resume_wakeup) (void *_p);
-+ /** Suspend function */
-+ int (*suspend) (void *_p);
-+ /** Session Start (SRP) */
-+ int (*session_start) (void *_p);
-+ /** Pointer passed to start() and stop() */
-+ void *p;
-+} dwc_otg_cil_callbacks_t;
-+
-+extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
-@@ -0,0 +1,750 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1065567 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * This file contains the Common Interrupt handlers.
-+ */
-+#include "linux/dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+
-+#ifdef DEBUG
-+inline const char *op_state_str(dwc_otg_core_if_t *core_if)
-+{
-+ return (core_if->op_state==A_HOST?"a_host":
-+ (core_if->op_state==A_SUSPEND?"a_suspend":
-+ (core_if->op_state==A_PERIPHERAL?"a_peripheral":
-+ (core_if->op_state==B_PERIPHERAL?"b_peripheral":
-+ (core_if->op_state==B_HOST?"b_host":
-+ "unknown")))));
-+}
-+#endif
-+
-+/** This function will log a debug message
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-+ dwc_otg_mode(core_if) ? "Host" : "Device");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.modemismatch = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/** Start the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->start) {
-+ core_if->hcd_cb->start(core_if->hcd_cb->p);
-+ }
-+}
-+/** Stop the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_stop(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->stop) {
-+ core_if->hcd_cb->stop(core_if->hcd_cb->p);
-+ }
-+}
-+/** Disconnect the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_disconnect(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
-+ core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
-+ }
-+}
-+/** Inform the HCD the a New Session has begun. Helper function for
-+ * using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_session_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
-+ core_if->hcd_cb->session_start(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Start the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_start(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->start) {
-+ core_if->pcd_cb->start(core_if->pcd_cb->p);
-+ }
-+}
-+/** Stop the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_stop(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->stop) {
-+ core_if->pcd_cb->stop(core_if->pcd_cb->p);
-+ }
-+}
-+/** Suspend the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_suspend(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
-+ core_if->pcd_cb->suspend(core_if->pcd_cb->p);
-+ }
-+}
-+/** Resume the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_resume(dwc_otg_core_if_t *core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+}
-+
-+/**
-+ * This function handles the OTG Interrupts. It reads the OTG
-+ * Interrupt Register (GOTGINT) to determine what interrupt has
-+ * occurred.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ gotgint_data_t gotgint;
-+ gotgctl_data_t gotgctl;
-+ gintmsk_data_t gintmsk;
-+
-+ gotgint.d32 = dwc_read_reg32(&global_regs->gotgint);
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32);
-+
-+ if (gotgint.b.sesenddet) {
-+ DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: "
-+ "Session End Detected++ (%s)\n",
-+ op_state_str(core_if));
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+
-+ if (core_if->op_state == B_HOST) {
-+ pcd_start(core_if);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ /* If not B_HOST and Device HNP still set. HNP
-+ * Did not succeed!*/
-+ if (gotgctl.b.devhnpen) {
-+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
-+ DWC_ERROR("Device Not Connected/Responding!\n");
-+ }
-+
-+ /* If Session End Detected the B-Cable has
-+ * been disconnected. */
-+ /* Reset PCD and Gadget driver to a
-+ * clean state. */
-+ pcd_stop(core_if);
-+ }
-+ gotgctl.d32 = 0;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ if (gotgint.b.sesreqsucstschng) {
-+ DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: "
-+ "Session Reqeust Success Status Change++\n");
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ if (gotgctl.b.sesreqscs) {
-+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->core_params->i2c_enable)) {
-+ core_if->srp_success = 1;
-+ }
-+ else {
-+ pcd_resume(core_if);
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ }
-+ }
-+ if (gotgint.b.hstnegsucstschng) {
-+ /* Print statements during the HNP interrupt handling
-+ * can cause it to fail.*/
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ if (gotgctl.b.hstnegscs) {
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ core_if->op_state = B_HOST;
-+ /*
-+ * Need to disable SOF interrupt immediately.
-+ * When switching from device to host, the PCD
-+ * interrupt handler won't handle the
-+ * interrupt if host mode is already set. The
-+ * HCD interrupt handler won't get called if
-+ * the HCD state is HALT. This means that the
-+ * interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ pcd_stop(core_if);
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ hcd_start(core_if);
-+ core_if->op_state = B_HOST;
-+ }
-+ } else {
-+ gotgctl.d32 = 0;
-+ gotgctl.b.hnpreq = 1;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
-+ DWC_ERROR("Device Not Connected/Responding\n");
-+ }
-+ }
-+ if (gotgint.b.hstnegdet) {
-+ /* The disconnect interrupt is set at the same time as
-+ * Host Negotiation Detected. During the mode
-+ * switch all interrupts are cleared so the disconnect
-+ * interrupt handler will not get executed.
-+ */
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Host Negotiation Detected++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-+ if (dwc_otg_is_device_mode(core_if)){
-+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state);
-+ hcd_disconnect(core_if);
-+ pcd_start(core_if);
-+ core_if->op_state = A_PERIPHERAL;
-+ } else {
-+ /*
-+ * Need to disable SOF interrupt immediately. When
-+ * switching from device to host, the PCD interrupt
-+ * handler won't handle the interrupt if host mode is
-+ * already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that
-+ * the interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ pcd_stop(core_if);
-+ hcd_start(core_if);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+ if (gotgint.b.adevtoutchng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "A-Device Timeout Change++\n");
-+ }
-+ if (gotgint.b.debdone) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Debounce Done++\n");
-+ }
-+
-+ /* Clear GOTGINT */
-+ dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32);
-+
-+ return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+
-+void w_conn_id_status_change(void *p)
-+{
-+ dwc_otg_core_if_t *core_if = p;
-+
-+#else
-+
-+void w_conn_id_status_change(struct work_struct *p)
-+{
-+ dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id);
-+
-+#endif
-+
-+
-+ uint32_t count = 0;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-+
-+ /* B-Device connector (Device Mode) */
-+ if (gotgctl.b.conidsts) {
-+ /* Wait for switch to device mode. */
-+ while (!dwc_otg_is_device_mode(core_if)){
-+ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ pcd_start(core_if);
-+ } else {
-+ /* A-Device connector (Host Mode) */
-+ while (!dwc_otg_is_host_mode(core_if)) {
-+ DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ core_if->op_state = A_HOST;
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ hcd_start(core_if);
-+ }
-+}
-+
-+
-+/**
-+ * This function handles the Connector ID Status Change Interrupt. It
-+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
-+ * is a Device to Host Mode transition or a Host Mode to Device
-+ * Transition.
-+ *
-+ * This only occurs when the cable is connected/removed from the PHY
-+ * connector.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if)
-+{
-+
-+ /*
-+ * Need to disable SOF interrupt immediately. If switching from device
-+ * to host, the PCD interrupt handler won't handle the interrupt if
-+ * host mode is already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that the interrupt does
-+ * not get handled and Linux complains loudly.
-+ */
-+ gintmsk_data_t gintmsk = { .d32 = 0 };
-+ gintsts_data_t gintsts = { .d32 = 0 };
-+
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+
-+ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"));
-+
-+ /*
-+ * Need to schedule a work, as there are possible DELAY function calls
-+ */
-+ queue_work(core_if->wq_otg, &core_if->w_conn_id);
-+
-+ /* Set flag and clear interrupt */
-+ gintsts.b.conidstschng = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device is initiating the Session
-+ * Request Protocol to request the host to turn on bus power so a new
-+ * session can begin. The handler responds by turning on bus power. If
-+ * the DWC_otg controller is in low power mode, the handler brings the
-+ * controller out of low power mode before turning on bus power.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+#ifndef DWC_HOST_ONLY
-+ hprt0_data_t hprt0;
-+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_PRINT("SRP: Device mode\n");
-+ } else {
-+ DWC_PRINT("SRP: Host mode\n");
-+
-+ /* Turn on the port power bit. */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Start the Connection timer. So a message can be displayed
-+ * if connect does not occur within 10 seconds. */
-+ hcd_session_start(core_if);
-+ }
-+#endif
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sessreqintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+void w_wakeup_detected(void *p)
-+{
-+ dwc_otg_core_if_t* core_if = p;
-+
-+#else
-+
-+void w_wakeup_detected(struct work_struct *p)
-+{
-+ struct delayed_work *dw = container_of(p, struct delayed_work, work);
-+ dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp);
-+
-+#endif
-+ /*
-+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-+ * so that OPT tests pass with all PHYs).
-+ */
-+ hprt0_data_t hprt0 = {.d32=0};
-+#if 0
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ UDELAY(10);
-+#endif //0
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-+// MDELAY(70);
-+ hprt0.b.prtres = 0; /* Resume */
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0));
-+}
-+/**
-+ * This interrupt indicates that the DWC_otg controller has detected a
-+ * resume or remote wakeup sequence. If the DWC_otg controller is in
-+ * low power mode, the handler must brings the controller out of low
-+ * power mode. The controller automatically begins resume
-+ * signaling. The handler schedules a time to stop resume signaling.
-+ */
-+int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dctl_data_t dctl = {.d32=0};
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
-+ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts));
-+#ifdef PARTIAL_POWER_DOWN
-+ if (core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+
-+ power.d32 = dwc_read_reg32(core_if->pcgcctl);
-+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-+
-+ power.b.stoppclk = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.pwrclmp = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 0;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+ }
-+#endif
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+
-+ } else {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0);
-+
-+ queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1));
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.wkupintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device has been disconnected from
-+ * the root port.
-+ */
-+int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
-+ (dwc_otg_is_host_mode(core_if)?"Host":"Device"),
-+ op_state_str(core_if));
-+
-+/** @todo Consolidate this if statement. */
-+#ifndef DWC_HOST_ONLY
-+ if (core_if->op_state == B_HOST) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect(core_if);
-+ pcd_start(core_if);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else if (dwc_otg_is_device_mode(core_if)) {
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl);
-+ if (gotgctl.b.hstsethnpen==1) {
-+ /* Do nothing, if HNP in process the OTG
-+ * interrupt "Host Negotiation Detected"
-+ * interrupt will do the mode switch.
-+ */
-+ } else if (gotgctl.b.devhnpen == 0) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect(core_if);
-+ pcd_start(core_if);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
-+ }
-+ } else {
-+ if (core_if->op_state == A_HOST) {
-+ /* A-Cable still connected but device disconnected. */
-+ hcd_disconnect(core_if);
-+ }
-+ }
-+#endif
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.disconnect = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+/**
-+ * This interrupt indicates that SUSPEND state has been detected on
-+ * the USB.
-+ *
-+ * For HNP the USB Suspend interrupt signals the change from
-+ * "a_peripheral" to "a_host".
-+ *
-+ * When power management is enabled the core will be put in low power
-+ * mode.
-+ */
-+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ /* Check the Device status register to determine if the Suspend
-+ * state is active. */
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
-+ "HWCFG4.power Optimize=%d\n",
-+ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
-+
-+
-+#ifdef PARTIAL_POWER_DOWN
-+/** @todo Add a module parameter for power management. */
-+
-+ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+ DWC_DEBUGPL(DBG_CIL, "suspend\n");
-+
-+ power.b.pwrclmp = 1;
-+ dwc_write_reg32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-+
-+ power.b.stoppclk = 1;
-+ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32);
-+
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
-+ }
-+#endif
-+ /* PCD callback for suspend. */
-+ pcd_suspend(core_if);
-+ } else {
-+ if (core_if->op_state == A_PERIPHERAL) {
-+ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
-+ /* Clear the a_peripheral flag, back to a_host. */
-+ pcd_stop(core_if);
-+ hcd_start(core_if);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+ gintmsk_data_t gintmsk_common = {.d32=0};
-+ gintmsk_common.b.wkupintr = 1;
-+ gintmsk_common.b.sessreqintr = 1;
-+ gintmsk_common.b.conidstschng = 1;
-+ gintmsk_common.b.otgintr = 1;
-+ gintmsk_common.b.modemismatch = 1;
-+ gintmsk_common.b.disconnect = 1;
-+ gintmsk_common.b.usbsuspend = 1;
-+ /** @todo: The port interrupt occurs while in device
-+ * mode. Added code to CIL to clear the interrupt for now!
-+ */
-+ gintmsk_common.b.portintr = 1;
-+
-+ gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts);
-+ gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk);
-+#ifdef DEBUG
-+ /* if any common interrupts set */
-+ if (gintsts.d32 & gintmsk_common.d32) {
-+ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
-+ gintsts.d32, gintmsk.d32);
-+ }
-+#endif
-+
-+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-+
-+}
-+
-+/**
-+ * Common interrupt handler.
-+ *
-+ * The common interrupts are those that occur in both Host and Device mode.
-+ * This handler handles the following interrupts:
-+ * - Mode Mismatch Interrupt
-+ * - Disconnect Interrupt
-+ * - OTG Interrupt
-+ * - Connector ID Status Change Interrupt
-+ * - Session Request Interrupt.
-+ * - Resume / Remote Wakeup Detected Interrupt.
-+ *
-+ */
-+int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if)
-+{
-+ int retval = 0;
-+ gintsts_data_t gintsts;
-+
-+ gintsts.d32 = dwc_otg_read_common_intr(core_if);
-+
-+ if (gintsts.b.modemismatch) {
-+ retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
-+ }
-+ if (gintsts.b.otgintr) {
-+ retval |= dwc_otg_handle_otg_intr(core_if);
-+ }
-+ if (gintsts.b.conidstschng) {
-+ retval |= dwc_otg_handle_conn_id_status_change_intr(core_if);
-+ }
-+ if (gintsts.b.disconnect) {
-+ retval |= dwc_otg_handle_disconnect_intr(core_if);
-+ }
-+ if (gintsts.b.sessreqintr) {
-+ retval |= dwc_otg_handle_session_req_intr(core_if);
-+ }
-+ if (gintsts.b.wkupintr) {
-+ retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
-+ }
-+ if (gintsts.b.usbsuspend) {
-+ retval |= dwc_otg_handle_usb_suspend_intr(core_if);
-+ }
-+ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
-+ /* The port interrupt occurs while in device mode with HPRT0
-+ * Port Enable/Disable.
-+ */
-+ gintsts.d32 = 0;
-+ gintsts.b.portintr = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->gintsts,
-+ gintsts.d32);
-+ retval |= 1;
-+
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
-@@ -0,0 +1,1273 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
-+ * $Revision: 1.7 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 791271 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ * The dwc_otg_driver module provides the initialization and cleanup entry
-+ * points for the DWC_otg driver. This module will be dynamically installed
-+ * after Linux is booted using the insmod command. When the module is
-+ * installed, the dwc_otg_driver_init function is called. When the module is
-+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
-+ *
-+ * This module also defines a data structure for the dwc_otg_driver, which is
-+ * used in conjunction with the standard ARM platform_device structure. These
-+ * structures allow the OTG driver to comply with the standard Linux driver
-+ * model in which devices and drivers are registered with a bus driver. This
-+ * has the benefit that Linux can expose attributes of the driver and device
-+ * in its special sysfs file system. Users can then read or write files in
-+ * this file system to perform diagnostics on the driver components or the
-+ * device.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/version.h>
-+#include <linux/platform_device.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# include <linux/irq.h>
-+#endif
-+
-+#include <asm/io.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+# include <asm/irq.h>
-+#endif
-+
-+#include "linux/dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008"
-+#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-+
-+static const char dwc_driver_name[] = "dwc_otg";
-+
-+/*-------------------------------------------------------------------------*/
-+/* Encapsulate the module parameter settings */
-+
-+static dwc_otg_core_params_t dwc_otg_module_params = {
-+ .opt = -1,
-+ .otg_cap = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .dma_burst_size = -1,
-+ .speed = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .enable_dynamic_fifo = -1,
-+ .data_fifo_size = -1,
-+ .dev_rx_fifo_size = -1,
-+ .dev_nperio_tx_fifo_size = -1,
-+ .dev_perio_tx_fifo_size = {
-+ /* dev_perio_tx_fifo_size_1 */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .dev_endpoints = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .ts_dline = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .dev_tx_fifo_size = {
-+ /* dev_tx_fifo_size */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .thr_ctl = -1,
-+ .tx_thr_length = -1,
-+ .rx_thr_length = -1,
-+ .pti_enable = -1,
-+ .mpi_enable = -1,
-+};
-+
-+/**
-+ * This function shows the Driver Version.
-+ */
-+static ssize_t version_show(struct device_driver *dev, char *buf)
-+{
-+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n",
-+ DWC_DRIVER_VERSION);
-+}
-+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-+
-+/**
-+ * Global Debug Level Mask.
-+ */
-+uint32_t g_dbg_lvl = 0; /* OFF */
-+
-+/**
-+ * This function shows the driver Debug Level.
-+ */
-+static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
-+{
-+ return sprintf(buf, "0x%0x\n", g_dbg_lvl);
-+}
-+
-+/**
-+ * This function stores the driver Debug Level.
-+ */
-+static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
-+ size_t count)
-+{
-+ g_dbg_lvl = simple_strtoul(buf, NULL, 16);
-+ return count;
-+}
-+static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
-+
-+/**
-+ * This function is called during module intialization to verify that
-+ * the module parameters are in a valid state.
-+ */
-+static int check_parameters(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ int retval = 0;
-+
-+/* Checks if the parameter is outside of its valid range of values */
-+#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
-+ ((dwc_otg_module_params._param_ < (_low_)) || \
-+ (dwc_otg_module_params._param_ > (_high_)))
-+
-+/* If the parameter has been set by the user, check that the parameter value is
-+ * within the value range of values. If not, report a module error. */
-+#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \
-+ do { \
-+ if (dwc_otg_module_params._param_ != -1) { \
-+ if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'\n", \
-+ dwc_otg_module_params._param_, _string_); \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ retval++; \
-+ } \
-+ } \
-+ } while (0)
-+
-+ DWC_OTG_PARAM_ERR(opt,0,1,"opt");
-+ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
-+ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
-+ DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable");
-+ DWC_OTG_PARAM_ERR(speed,0,1,"speed");
-+ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
-+ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
-+ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
-+ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
-+ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
-+ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
-+ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
-+ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
-+ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
-+ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
-+ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-+
-+ if (dwc_otg_module_params.dma_burst_size != -1) {
-+ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) {
-+ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
-+ dwc_otg_module_params.dma_burst_size);
-+ dwc_otg_module_params.dma_burst_size = 32;
-+ retval++;
-+ }
-+
-+ {
-+ uint8_t brst_sz = 0;
-+ while(dwc_otg_module_params.dma_burst_size > 1) {
-+ brst_sz ++;
-+ dwc_otg_module_params.dma_burst_size >>= 1;
-+ }
-+ dwc_otg_module_params.dma_burst_size = brst_sz;
-+ }
-+ }
-+
-+ if (dwc_otg_module_params.phy_utmi_width != -1) {
-+ if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) &&
-+ DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) {
-+ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
-+ dwc_otg_module_params.phy_utmi_width);
-+ dwc_otg_module_params.phy_utmi_width = 16;
-+ retval++;
-+ }
-+ }
-+
-+ for (i = 0; i < 15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ retval++;
-+ }
-+ }
-+ }
-+
-+ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
-+
-+ for (i = 0; i < 15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-+ retval++;
-+ }
-+ }
-+ }
-+
-+ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
-+ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
-+ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-+
-+ DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable");
-+ DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable");
-+
-+ /* At this point, all module parameters that have been set by the user
-+ * are valid, and those that have not are left unset. Now set their
-+ * default values and/or check the parameters against the hardware
-+ * configurations of the OTG core. */
-+
-+/* This sets the parameter to the default value if it has not been set by the
-+ * user */
-+#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
-+ ({ \
-+ int changed = 1; \
-+ if (dwc_otg_module_params._param_ == -1) { \
-+ changed = 0; \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ } \
-+ changed; \
-+ })
-+
-+/* This checks the macro agains the hardware configuration to see if it is
-+ * valid. It is possible that the default value could be invalid. In this
-+ * case, it will report a module error if the user touched the parameter.
-+ * Otherwise it will adjust the value without any error. */
-+#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \
-+ ({ \
-+ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
-+ int error = 0; \
-+ if (!(_is_valid_)) { \
-+ if (changed) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \
-+ error = 1; \
-+ } \
-+ dwc_otg_module_params._param_ = (_set_valid_); \
-+ } \
-+ error; \
-+ })
-+
-+ /* OTG Cap */
-+ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap",
-+ ({
-+ int valid;
-+ valid = 1;
-+ switch (dwc_otg_module_params.otg_cap) {
-+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
-+ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ valid = 0;
-+ break;
-+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
-+ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-+ valid = 0;
-+ }
-+ break;
-+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-+ /* always valid */
-+ break;
-+ }
-+ valid;
-+ }),
-+ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
-+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable",
-+ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable",
-+ ((dwc_otg_module_params.dma_desc_enable == 1) &&
-+ ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0);
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
-+ "host_support_fs_ls_low_power",
-+ 1, 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
-+ "enable_dynamic_fifo",
-+ ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
-+ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
-+ "data_fifo_size",
-+ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
-+ core_if->hwcfg3.b.dfifo_depth);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
-+ "dev_rx_fifo_size",
-+ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
-+ "dev_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
-+ "host_rx_fifo_size",
-+ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
-+ "host_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
-+ "host_perio_tx_fifo_size",
-+ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
-+ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
-+ "max_transfer_size",
-+ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
-+ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
-+ "max_packet_count",
-+ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
-+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
-+ "host_channels",
-+ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
-+ (core_if->hwcfg2.b.num_host_chan + 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
-+ "dev_endpoints",
-+ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
-+ core_if->hwcfg2.b.num_dev_ep);
-+
-+/*
-+ * Define the following to disable the FS PHY Hardware checking. This is for
-+ * internal testing only.
-+ *
-+ * #define NO_FS_PHY_HW_CHECKS
-+ */
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type",
-+ ({
-+ int valid = 0;
-+ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1)) {
-+ valid = 1;
-+ }
-+ valid;
-+ }),
-+ ({
-+ int set = DWC_PHY_TYPE_PARAM_FS;
-+ if (core_if->hwcfg2.b.hs_phy_type) {
-+ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 1)) {
-+ set = DWC_PHY_TYPE_PARAM_UTMI;
-+ }
-+ else {
-+ set = DWC_PHY_TYPE_PARAM_ULPI;
-+ }
-+ }
-+ set;
-+ }));
-+#endif
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed",
-+ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
-+ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
-+ "host_ls_low_power_phy_clk",
-+ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
-+ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
-+ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
-+ DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
-+ "i2c_enable",
-+ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
-+ 0);
-+#endif
-+
-+ for (i = 0; i < 15; i++) {
-+ int changed = 1;
-+ int error = 0;
-+
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo",
-+ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1,
-+ 0);
-+
-+ for (i = 0; i < 15; i++) {
-+ int changed = 1;
-+ int error = 0;
-+
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl",
-+ ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1,
-+ 0);
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
-+ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable",
-+ ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable",
-+ ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0,
-+ 0);
-+ return retval;
-+}
-+
-+/**
-+ * This function is the top level interrupt handler for the Common
-+ * (Device and host modes) interrupts.
-+ */
-+static irqreturn_t dwc_otg_common_irq(int irq, void *dev
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *r
-+#endif
-+ )
-+{
-+ dwc_otg_device_t *otg_dev = dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_handle_common_intr(otg_dev->core_if);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * This function is called when a platform_device is unregistered with the
-+ * dwc_otg_driver. This happens, for example, when the rmmod command is
-+ * executed. The device may or may not be electrically present. If it is
-+ * present, the driver stops device processing. Any resources used on behalf
-+ * of this device are freed.
-+ *
-+ * @param[in] pdev
-+ */
-+static int dwc_otg_driver_remove(struct platform_device *pdev)
-+{
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
-+ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev);
-+
-+ if (!otg_dev) {
-+ /* Memory allocation for the dwc_otg_device failed. */
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return 0;
-+ }
-+
-+ /*
-+ * Free the IRQ
-+ */
-+ if (otg_dev->common_irq_installed) {
-+ free_irq(otg_dev->irq, otg_dev);
-+ }
-+
-+#ifndef DWC_DEVICE_ONLY
-+ if (otg_dev->hcd) {
-+ dwc_otg_hcd_remove(&pdev->dev);
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return 0;
-+ }
-+#endif
-+
-+#ifndef DWC_HOST_ONLY
-+ if (otg_dev->pcd) {
-+ dwc_otg_pcd_remove(&pdev->dev);
-+ }
-+#endif
-+ if (otg_dev->core_if) {
-+ dwc_otg_cil_remove(otg_dev->core_if);
-+ }
-+
-+ /*
-+ * Remove the device attributes
-+ */
-+ dwc_otg_attr_remove(otg_dev->parent);
-+
-+ /* Disable USB port */
-+ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf);
-+
-+ /*
-+ * Return the memory.
-+ */
-+ if (otg_dev->base) {
-+ iounmap(otg_dev->base);
-+ }
-+
-+ if (otg_dev->phys_addr != 0) {
-+ release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
-+ }
-+
-+ kfree(otg_dev);
-+
-+ /*
-+ * Clear the drvdata pointer.
-+ */
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is called when an platform_device is bound to a
-+ * dwc_otg_driver. It creates the driver components required to
-+ * control the device (CIL, HCD, and PCD) and it initializes the
-+ * device. The driver components are stored in a dwc_otg_device
-+ * structure. A reference to the dwc_otg_device is saved in the
-+ * platform_device. This allows the driver to access the dwc_otg_device
-+ * structure on subsequent calls to driver methods for this device.
-+ *
-+ * @param[in] pdev platform_device definition
-+ */
-+static int dwc_otg_driver_probe(struct platform_device *pdev)
-+{
-+ int retval = 0;
-+ uint32_t snpsid;
-+ dwc_otg_device_t *otg_dev;
-+ struct resource *res;
-+
-+ dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev);
-+
-+ otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
-+ if (!otg_dev) {
-+ dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ otg_dev->reg_offset = 0xFFFFFFFF;
-+
-+ /*
-+ * Retrieve the memory and IRQ resources.
-+ */
-+ otg_dev->irq = platform_get_irq(pdev, 0);
-+ if (otg_dev->irq <= 0) {
-+ dev_err(&pdev->dev, "no device irq\n");
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ dev_err(&pdev->dev, "no CSR address\n");
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ otg_dev->parent = &pdev->dev;
-+ otg_dev->phys_addr = res->start;
-+ otg_dev->base_len = res->end - res->start + 1;
-+ if (request_mem_region(otg_dev->phys_addr,
-+ otg_dev->base_len,
-+ dwc_driver_name) == NULL) {
-+ dev_err(&pdev->dev, "request_mem_region failed\n");
-+ retval = -EBUSY;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Map the DWC_otg Core memory into virtual address space.
-+ */
-+ otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len);
-+ if (!otg_dev->base) {
-+ dev_err(&pdev->dev, "ioremap() failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base);
-+
-+ /* Enable USB Port */
-+ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0);
-+
-+ /*
-+ * Attempt to ensure this device is really a DWC_otg Controller.
-+ * Read and verify the SNPSID register contents. The value should be
-+ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
-+ */
-+ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40));
-+
-+ if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) {
-+ dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ DWC_PRINT("Core Release: %x.%x%x%x\n",
-+ (snpsid >> 12 & 0xF),
-+ (snpsid >> 8 & 0xF),
-+ (snpsid >> 4 & 0xF),
-+ (snpsid & 0xF));
-+
-+ /*
-+ * Initialize driver data to point to the global DWC_otg
-+ * Device structure.
-+ */
-+ platform_set_drvdata(pdev, otg_dev);
-+ dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev);
-+
-+
-+ otg_dev->core_if = dwc_otg_cil_init(otg_dev->base,
-+ &dwc_otg_module_params);
-+
-+ otg_dev->core_if->snpsid = snpsid;
-+
-+ if (!otg_dev->core_if) {
-+ dev_err(&pdev->dev, "CIL initialization failed!\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Validate parameter values.
-+ */
-+ if (check_parameters(otg_dev->core_if)) {
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Create Device Attributes in sysfs
-+ */
-+ //dwc_otg_attr_create(&pdev->dev);
-+
-+ /*
-+ * Disable the global interrupt until all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_disable_global_interrupts(otg_dev->core_if);
-+
-+ /*
-+ * Install the interrupt handler for the common interrupts before
-+ * enabling common interrupts in core_init below.
-+ */
-+ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
-+ otg_dev->irq);
-+ retval = request_irq(otg_dev->irq, dwc_otg_common_irq,
-+ IRQF_SHARED, "dwc_otg", otg_dev);
-+ if (retval) {
-+ DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
-+ retval = -EBUSY;
-+ goto fail;
-+ } else {
-+ otg_dev->common_irq_installed = 1;
-+ }
-+
-+ /*
-+ * Initialize the DWC_otg core.
-+ */
-+ dwc_otg_core_init(otg_dev->core_if);
-+
-+#ifndef DWC_HOST_ONLY
-+ /*
-+ * Initialize the PCD
-+ */
-+ retval = dwc_otg_pcd_init(&pdev->dev);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_pcd_init failed\n");
-+ otg_dev->pcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+#ifndef DWC_DEVICE_ONLY
-+ /*
-+ * Initialize the HCD
-+ */
-+ retval = dwc_otg_hcd_init(&pdev->dev);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_hcd_init failed\n");
-+ otg_dev->hcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+
-+ /*
-+ * Enable the global interrupt after all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_enable_global_interrupts(otg_dev->core_if);
-+
-+ return 0;
-+
-+ fail:
-+ dwc_otg_driver_remove(pdev);
-+ return retval;
-+}
-+
-+/**
-+ * This structure defines the methods to be called by a bus driver
-+ * during the lifecycle of a device on that bus. Both drivers and
-+ * devices are registered with a bus driver. The bus driver matches
-+ * devices to drivers based on information in the device and driver
-+ * structures.
-+ *
-+ * The probe function is called when the bus driver matches a device
-+ * to this driver. The remove function is called when a device is
-+ * unregistered with the bus driver.
-+ */
-+
-+static const struct of_device_id ralink_otg_match[] = {
-+ { .compatible = "ralink,rt3050-otg" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_otg_match);
-+
-+static struct platform_driver dwc_otg_driver = {
-+ .driver = {
-+ .name = (char *)dwc_driver_name,
-+ .of_match_table = ralink_otg_match,
-+ },
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+};
-+
-+/**
-+ * This function is called when the dwc_otg_driver is installed with the
-+ * insmod command. It registers the dwc_otg_driver structure with the
-+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
-+ * to be called. In addition, the bus driver will automatically expose
-+ * attributes defined for the device and driver in the special sysfs file
-+ * system.
-+ *
-+ * @return
-+ */
-+static int __init dwc_otg_driver_init(void)
-+{
-+ int retval = 0;
-+ int error;
-+
-+ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
-+
-+ retval = platform_driver_register(&dwc_otg_driver);
-+ if (retval) {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+
-+ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
-+ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+
-+ return retval;
-+}
-+module_init(dwc_otg_driver_init);
-+
-+/**
-+ * This function is called when the driver is removed from the kernel
-+ * with the rmmod command. The driver unregisters itself with its bus
-+ * driver.
-+ *
-+ */
-+static void __exit dwc_otg_driver_cleanup(void)
-+{
-+ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
-+
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-+
-+ platform_driver_unregister(&dwc_otg_driver);
-+
-+ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-+}
-+module_exit(dwc_otg_driver_cleanup);
-+
-+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-+MODULE_AUTHOR("Synopsys Inc.");
-+MODULE_LICENSE("GPL");
-+
-+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-+module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-+MODULE_PARM_DESC(opt, "OPT Mode");
-+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-+
-+module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444);
-+MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
-+
-+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-+MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-+module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-+module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-+MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-+module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-+MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-+module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-+MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-+/** @todo Set the max to 512K, modify checks */
-+MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-+MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-+module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-+MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-+MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-+module_param_named(debug, g_dbg_lvl, int, 0444);
-+MODULE_PARM_DESC(debug, "");
-+
-+module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-+MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-+module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-+
-+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-+MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-+
-+module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
-+MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled");
-+
-+module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
-+MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled");
-+
-+/** @page "Module Parameters"
-+ *
-+ * The following parameters may be specified when starting the module.
-+ * These parameters define how the DWC_otg controller should be
-+ * configured. Parameter values are passed to the CIL initialization
-+ * function dwc_otg_cil_init
-+ *
-+ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
-+ *
-+
-+ <table>
-+ <tr><td>Parameter Name</td><td>Meaning</td></tr>
-+
-+ <tr>
-+ <td>otg_cap</td>
-+ <td>Specifies the OTG capabilities. The driver will automatically detect the
-+ value for this parameter if none is specified.
-+ - 0: HNP and SRP capable (default, if available)
-+ - 1: SRP Only capable
-+ - 2: No HNP/SRP capable
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_enable</td>
-+ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Slave
-+ - 1: DMA (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_burst_size</td>
-+ <td>The DMA Burst size (applicable only for External DMA Mode).
-+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ </td></tr>
-+
-+ <tr>
-+ <td>speed</td>
-+ <td>Specifies the maximum speed of operation in host and device mode. The
-+ actual speed depends on the speed of the attached device and the value of
-+ phy_type.
-+ - 0: High Speed (default)
-+ - 1: Full Speed
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_support_fs_ls_low_power</td>
-+ <td>Specifies whether low power mode is supported when attached to a Full
-+ Speed or Low Speed device in host mode.
-+ - 0: Don't support low power mode (default)
-+ - 1: Support low power mode
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_ls_low_power_phy_clk</td>
-+ <td>Specifies the PHY clock rate in low power mode when connected to a Low
-+ Speed device in host mode. This parameter is applicable only if
-+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
-+ - 0: 48 MHz (default)
-+ - 1: 6 MHz
-+ </td></tr>
-+
-+ <tr>
-+ <td>enable_dynamic_fifo</td>
-+ <td> Specifies whether FIFOs may be resized by the driver software.
-+ - 0: Use cC FIFO size parameters
-+ - 1: Allow dynamic FIFO sizing (default)
-+ </td></tr>
-+
-+ <tr>
-+ <td>data_fifo_size</td>
-+ <td>Total number of 4-byte words in the data FIFO memory. This memory
-+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
-+ - Values: 32 to 32768 (default 8192)
-+
-+ Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1064)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
-+ dynamic FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
-+ dynamic FIFO sizing is enabled in the core.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_perio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_transfer_size</td>
-+ <td>The maximum transfer size supported in bytes.
-+ - Values: 2047 to 65,535 (default 65,535)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_packet_count</td>
-+ <td>The maximum number of packets in a transfer.
-+ - Values: 15 to 511 (default 511)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_channels</td>
-+ <td>The number of host channel registers to use.
-+ - Values: 1 to 16 (default 12)
-+
-+ Note: The FPGA configuration supports a maximum of 12 host channels.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_endpoints</td>
-+ <td>The number of endpoints in addition to EP0 available for device mode
-+ operations.
-+ - Values: 1 to 15 (default 6 IN and OUT)
-+
-+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
-+ addition to EP0.
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_type</td>
-+ <td>Specifies the type of PHY interface to use. By default, the driver will
-+ automatically detect the phy_type.
-+ - 0: Full Speed
-+ - 1: UTMI+ (default, if available)
-+ - 2: ULPI
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_utmi_width</td>
-+ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
-+ phy_type of UTMI+. Also, this parameter is applicable only if the
-+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
-+ core has been configured to work at either data path width.
-+ - Values: 8 or 16 bits (default 16)
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_ulpi_ddr</td>
-+ <td>Specifies whether the ULPI operates at double or single data rate. This
-+ parameter is only applicable if phy_type is ULPI.
-+ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
-+ - 1: double data rate ULPI interface with 4 bit wide data bus
-+ </td></tr>
-+
-+ <tr>
-+ <td>i2c_enable</td>
-+ <td>Specifies whether to use the I2C interface for full speed PHY. This
-+ parameter is only applicable if PHY_TYPE is FS.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>otg_en_multiple_tx_fifo</td>
-+ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Disabled
-+ - 1: Enabled (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+*/
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
-@@ -0,0 +1,83 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_DRIVER_H__
-+#define __DWC_OTG_DRIVER_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux driver.
-+ */
-+#include "dwc_otg_cil.h"
-+
-+/* Type declarations */
-+struct dwc_otg_pcd;
-+struct dwc_otg_hcd;
-+
-+/**
-+ * This structure is a wrapper that encapsulates the driver components used to
-+ * manage a single DWC_otg controller.
-+ */
-+typedef struct dwc_otg_device {
-+ /** Base address returned from ioremap() */
-+ void *base;
-+
-+ struct device *parent;
-+
-+ /** Pointer to the core interface structure. */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Register offset for Diagnostic API. */
-+ uint32_t reg_offset;
-+
-+ /** Pointer to the PCD structure. */
-+ struct dwc_otg_pcd *pcd;
-+
-+ /** Pointer to the HCD structure. */
-+ struct dwc_otg_hcd *hcd;
-+
-+ /** Flag to indicate whether the common IRQ handler is installed. */
-+ uint8_t common_irq_installed;
-+
-+ /* Interrupt request number. */
-+ unsigned int irq;
-+
-+ /* Physical address of Control and Status registers, used by
-+ * release_mem_region().
-+ */
-+ resource_size_t phys_addr;
-+
-+ /* Length of memory region, used by release_mem_region(). */
-+ unsigned long base_len;
-+} dwc_otg_device_t;
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
-@@ -0,0 +1,2852 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
-+ * $Revision: 1.4 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1064940 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the implementation of the HCD. In Linux, the HCD
-+ * implements the hc_driver API.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+static const char dwc_otg_hcd_name[] = "dwc_otg";
-+
-+static const struct hc_driver dwc_otg_hc_driver = {
-+
-+ .description = dwc_otg_hcd_name,
-+ .product_desc = "DWC OTG Controller",
-+ .hcd_priv_size = sizeof(dwc_otg_hcd_t),
-+
-+ .irq = dwc_otg_hcd_irq,
-+
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ //.reset =
-+ .start = dwc_otg_hcd_start,
-+ //.suspend =
-+ //.resume =
-+ .stop = dwc_otg_hcd_stop,
-+
-+ .urb_enqueue = dwc_otg_hcd_urb_enqueue,
-+ .urb_dequeue = dwc_otg_hcd_urb_dequeue,
-+ .endpoint_disable = dwc_otg_hcd_endpoint_disable,
-+
-+ .get_frame_number = dwc_otg_hcd_get_frame_number,
-+
-+ .hub_status_data = dwc_otg_hcd_hub_status_data,
-+ .hub_control = dwc_otg_hcd_hub_control,
-+ //.hub_suspend =
-+ //.hub_resume =
-+};
-+
-+/**
-+ * Work queue function for starting the HCD when A-Cable is connected.
-+ * The dwc_otg_hcd_start() must be called in a process context.
-+ */
-+static void hcd_start_func(
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ void *_vp
-+#else
-+ struct work_struct *_work
-+#endif
-+ )
-+{
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp;
-+#else
-+ struct delayed_work *dw = container_of(_work, struct delayed_work, work);
-+ struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work);
-+ struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv);
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
-+ if (usb_hcd) {
-+ dwc_otg_hcd_start(usb_hcd);
-+ }
-+}
-+
-+/**
-+ * HCD Callback function for starting the HCD when A-Cable is
-+ * connected.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ if (core_if->op_state == B_HOST) {
-+ /*
-+ * Reset the port. During a HNP mode switch the reset
-+ * needs to occur within 1ms and have a duration of at
-+ * least 50ms.
-+ */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ ((struct usb_hcd *)p)->self.is_b_host = 1;
-+ } else {
-+ ((struct usb_hcd *)p)->self.is_b_host = 0;
-+ }
-+
-+ /* Need to start the HCD in a non-interrupt context. */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-+// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p);
-+#else
-+// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-+ INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-+#endif
-+// schedule_work(&dwc_otg_hcd->start_work);
-+ queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000);
-+
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback function for stopping the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_stop_cb(void *p)
-+{
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)p;
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd_stop(usb_hcd);
-+ return 1;
-+}
-+
-+static void del_xfer_timers(dwc_otg_hcd_t *hcd)
-+{
-+#ifdef DEBUG
-+ int i;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ del_timer(&hcd->core_if->hc_xfer_timer[i]);
-+ }
-+#endif
-+}
-+
-+static void del_timers(dwc_otg_hcd_t *hcd)
-+{
-+ del_xfer_timers(hcd);
-+ del_timer(&hcd->conn_timer);
-+}
-+
-+/**
-+ * Processes all the URBs in a single list of QHs. Completes them with
-+ * -ETIMEDOUT and frees the QTD.
-+ */
-+static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-+{
-+ struct list_head *qh_item;
-+ dwc_otg_qh_t *qh;
-+ struct list_head *qtd_item;
-+ dwc_otg_qtd_t *qtd;
-+
-+ list_for_each(qh_item, qh_list) {
-+ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
-+ for (qtd_item = qh->qtd_list.next;
-+ qtd_item != &qh->qtd_list;
-+ qtd_item = qh->qtd_list.next) {
-+ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
-+ if (qtd->urb != NULL) {
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb,
-+ -ETIMEDOUT);
-+ }
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-+ }
-+ }
-+}
-+
-+/**
-+ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
-+ * and periodic schedules. The QTD associated with each URB is removed from
-+ * the schedule and freed. This function may be called when a disconnect is
-+ * detected or when the HCD is being stopped.
-+ */
-+static void kill_all_urbs(dwc_otg_hcd_t *hcd)
-+{
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_disconnect_cb(void *p)
-+{
-+ gintsts_data_t intr;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+
-+ //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+
-+ /*
-+ * Set status flags for the hub driver.
-+ */
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 0;
-+
-+ /*
-+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
-+ * interrupt mask and status bits and disabling subsequent host
-+ * channel interrupts.
-+ */
-+ intr.d32 = 0;
-+ intr.b.nptxfempty = 1;
-+ intr.b.ptxfempty = 1;
-+ intr.b.hcintr = 1;
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /*
-+ * Turn off the vbus power only if the core has transitioned to device
-+ * mode. If still in host mode, need to keep power on to detect a
-+ * reconnection.
-+ */
-+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
-+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
-+ hprt0_data_t hprt0 = { .d32=0 };
-+ DWC_PRINT("Disconnect: PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+ }
-+
-+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-+ }
-+
-+ /* Respond with an error status to all URBs in the schedule. */
-+ kill_all_urbs(dwc_otg_hcd);
-+
-+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
-+ /* Clean up any host channels that were in use. */
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ /* Flush out any channel requests in slave mode. */
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+ }
-+ }
-+ }
-+
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ /* Halt the channel. */
-+ hcchar.b.chdis = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
-+ list_add_tail(&channel->hc_list_entry,
-+ &dwc_otg_hcd->free_hc_list);
-+ }
-+ }
-+ }
-+
-+ /* A disconnect will end the session so the B-Device is no
-+ * longer a B-host. */
-+ ((struct usb_hcd *)p)->self.is_b_host = 0;
-+ return 1;
-+}
-+
-+/**
-+ * Connection timeout function. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds.
-+ */
-+void dwc_otg_hcd_connect_timeout(unsigned long ptr)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr);
-+ DWC_PRINT("Connect Timeout\n");
-+ DWC_ERROR("Device Not Connected/Responding\n");
-+}
-+
-+/**
-+ * Start the connection timer. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds. The
-+ * timer is deleted if a port connect interrupt occurs before the
-+ * timer expires.
-+ */
-+static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd)
-+{
-+ init_timer(&hcd->conn_timer);
-+ hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
-+ hcd->conn_timer.data = 0;
-+ hcd->conn_timer.expires = jiffies + (HZ * 10);
-+ add_timer(&hcd->conn_timer);
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_session_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p);
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
-+ .start = dwc_otg_hcd_start_cb,
-+ .stop = dwc_otg_hcd_stop_cb,
-+ .disconnect = dwc_otg_hcd_disconnect_cb,
-+ .session_start = dwc_otg_hcd_session_start_cb,
-+ .p = 0,
-+};
-+
-+/**
-+ * Reset tasklet function
-+ */
-+static void reset_tasklet_func(unsigned long data)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data;
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay(60);
-+
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+}
-+
-+static struct tasklet_struct reset_tasklet = {
-+ .next = NULL,
-+ .state = 0,
-+ .count = ATOMIC_INIT(0),
-+ .func = reset_tasklet_func,
-+ .data = 0,
-+};
-+
-+/**
-+ * Initializes the HCD. This function allocates memory for and initializes the
-+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
-+ * USB bus with the core and calls the hc_driver->start() function. It returns
-+ * a negative error on failure.
-+ */
-+int dwc_otg_hcd_init(struct device *dev)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
-+ struct usb_hcd *hcd = NULL;
-+ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-+
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */
-+
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (otg_dev->core_if->dma_enable) {
-+ DWC_PRINT("Using DMA mode\n");
-+ dev->dma_mask = (void *)~0;
-+ dev->coherent_dma_mask = ~0;
-+
-+ if (otg_dev->core_if->dma_desc_enable) {
-+ DWC_PRINT("Device using Descriptor DMA mode\n");
-+ } else {
-+ DWC_PRINT("Device using Buffer DMA mode\n");
-+ }
-+ } else {
-+ DWC_PRINT("Using Slave mode\n");
-+ dev->dma_mask = (void *)0;
-+ dev->coherent_dma_mask = 0;
-+ }
-+#endif
-+ /*
-+ * Allocate memory for the base HCD plus the DWC OTG HCD.
-+ * Initialize the base HCD.
-+ */
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev));
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto error1;
-+ }
-+
-+ dev_set_drvdata(dev, otg_dev);
-+ hcd->regs = otg_dev->base;
-+ hcd->rsrc_start = otg_dev->phys_addr;
-+ hcd->rsrc_len = otg_dev->base_len;
-+ hcd->self.otg_port = 1;
-+ hcd->has_tt = 1;
-+
-+ /* Initialize the DWC OTG HCD. */
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_hcd->core_if = otg_dev->core_if;
-+ otg_dev->hcd = dwc_otg_hcd;
-+
-+ /* */
-+ spin_lock_init(&dwc_otg_hcd->lock);
-+
-+ /* Register the HCD CIL Callbacks */
-+ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
-+ &hcd_cil_callbacks, hcd);
-+
-+ /* Initialize the non-periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
-+
-+ /* Initialize the periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-+
-+ /*
-+ * Create a host channel descriptor for each host channel implemented
-+ * in the controller. Initialize the channel descriptor array.
-+ */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+ memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array));
-+ for (i = 0; i < num_channels; i++) {
-+ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
-+ if (channel == NULL) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: host channel allocation failed\n", __func__);
-+ goto error2;
-+ }
-+ memset(channel, 0, sizeof(dwc_hc_t));
-+ channel->hc_num = i;
-+ dwc_otg_hcd->hc_ptr_array[i] = channel;
-+#ifdef DEBUG
-+ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
-+ }
-+
-+ /* Initialize the Connection timeout timer. */
-+ init_timer(&dwc_otg_hcd->conn_timer);
-+
-+ /* Initialize reset tasklet. */
-+ reset_tasklet.data = (unsigned long) dwc_otg_hcd;
-+ dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (otg_dev->core_if->dma_enable) {
-+ DWC_PRINT("Using DMA mode\n");
-+ dev->dma_mask = (void *)~0;
-+ dev->coherent_dma_mask = ~0;
-+
-+ if (otg_dev->core_if->dma_desc_enable){
-+ DWC_PRINT("Device using Descriptor DMA mode\n");
-+ } else {
-+ DWC_PRINT("Device using Buffer DMA mode\n");
-+ }
-+ } else {
-+ DWC_PRINT("Using Slave mode\n");
-+ dev->dma_mask = (void *)0;
-+ dev->dev.coherent_dma_mask = 0;
-+ }
-+#endif
-+ /*
-+ * Finish generic HCD initialization and start the HCD. This function
-+ * allocates the DMA buffer pool, registers the USB bus, requests the
-+ * IRQ line, and calls dwc_otg_hcd_start method.
-+ */
-+ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
-+ if (retval < 0) {
-+ goto error2;
-+ }
-+
-+ /*
-+ * Allocate space for storing data on status transactions. Normally no
-+ * data is sent, but this space acts as a bit bucket. This must be
-+ * done after usb_add_hcd since that function allocates the DMA buffer
-+ * pool.
-+ */
-+ if (otg_dev->core_if->dma_enable) {
-+ dwc_otg_hcd->status_buf =
-+ dma_alloc_coherent(dev,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ &dwc_otg_hcd->status_buf_dma,
-+ GFP_KERNEL | GFP_DMA);
-+ } else {
-+ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ GFP_KERNEL);
-+ }
-+ if (!dwc_otg_hcd->status_buf) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
-+ goto error3;
-+ }
-+
-+ dwc_otg_hcd->otg_dev = otg_dev;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
-+ dev_name(dev), hcd->self.busnum);
-+
-+ return 0;
-+
-+ /* Error conditions */
-+ error3:
-+ usb_remove_hcd(hcd);
-+ error2:
-+ dwc_otg_hcd_free(hcd);
-+ usb_put_hcd(hcd);
-+
-+ /* FIXME: 2008/05/03 by Steven
-+ * write back to device:
-+ * dwc_otg_hcd has already been released by dwc_otg_hcd_free()
-+ */
-+ dev_set_drvdata(dev, otg_dev);
-+
-+ error1:
-+ return retval;
-+}
-+
-+/**
-+ * Removes the HCD.
-+ * Frees memory and resources associated with the HCD and deregisters the bus.
-+ */
-+void dwc_otg_hcd_remove(struct device *dev)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ struct usb_hcd *hcd;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-+
-+ if (!otg_dev) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return;
-+ }
-+
-+ dwc_otg_hcd = otg_dev->hcd;
-+
-+ if (!dwc_otg_hcd) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return;
-+ }
-+
-+ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-+
-+ if (!hcd) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__);
-+ return;
-+ }
-+
-+ /* Turn off all interrupts */
-+ dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
-+ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-+
-+ usb_remove_hcd(hcd);
-+ dwc_otg_hcd_free(hcd);
-+ usb_put_hcd(hcd);
-+}
-+
-+/* =========================================================================
-+ * Linux HC Driver Functions
-+ * ========================================================================= */
-+
-+/**
-+ * Initializes dynamic portions of the DWC_otg HCD state.
-+ */
-+static void hcd_reinit(dwc_otg_hcd_t *hcd)
-+{
-+ struct list_head *item;
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ hcd->flags.d32 = 0;
-+
-+ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
-+ hcd->non_periodic_channels = 0;
-+ hcd->periodic_channels = 0;
-+
-+ /*
-+ * Put all channels in the free channel list and clean up channel
-+ * states.
-+ */
-+ item = hcd->free_hc_list.next;
-+ while (item != &hcd->free_hc_list) {
-+ list_del(item);
-+ item = hcd->free_hc_list.next;
-+ }
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ channel = hcd->hc_ptr_array[i];
-+ list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list);
-+ dwc_otg_hc_cleanup(hcd->core_if, channel);
-+ }
-+
-+ /* Initialize the DWC core for host mode operation. */
-+ dwc_otg_core_host_init(hcd->core_if);
-+}
-+
-+/** Initializes the DWC_otg controller and its root hub and prepares it for host
-+ * mode operation. Activates the root port. Returns 0 on success and a negative
-+ * error code on failure. */
-+int dwc_otg_hcd_start(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ struct usb_bus *bus;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct usb_device *udev;
-+ int retval;
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-+
-+ bus = hcd_to_bus(hcd);
-+
-+ /* Initialize the bus state. If the core is in Device Mode
-+ * HALT the USB bus and return. */
-+ if (dwc_otg_is_device_mode(core_if)) {
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ hcd->state = HC_STATE_HALT;
-+#else
-+ hcd->state = HC_STATE_RUNNING;
-+#endif
-+ return 0;
-+ }
-+ hcd->state = HC_STATE_RUNNING;
-+
-+ /* Initialize and connect root hub if one is not already attached */
-+ if (bus->root_hub) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
-+ /* Inform the HUB driver to resume. */
-+ usb_hcd_resume_root_hub(hcd);
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n");
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ udev = usb_alloc_dev(NULL, bus, 0);
-+ udev->speed = USB_SPEED_HIGH;
-+ if (!udev) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
-+ return -ENODEV;
-+ }
-+ if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
-+ return -ENODEV;
-+ }
-+#endif
-+ }
-+
-+ hcd_reinit(dwc_otg_hcd);
-+
-+ return 0;
-+}
-+
-+static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list)
-+{
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh;
-+
-+ if (!qh_list->next) {
-+ /* The list hasn't been initialized yet. */
-+ return;
-+ }
-+
-+ /* Ensure there are no QTDs or URBs left. */
-+ kill_urbs_in_qh_list(hcd, qh_list);
-+
-+ for (item = qh_list->next; item != qh_list; item = qh_list->next) {
-+ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ dwc_otg_hcd_qh_remove_and_free(hcd, qh);
-+ }
-+}
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ */
-+void dwc_otg_hcd_stop(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ hprt0_data_t hprt0 = { .d32=0 };
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-+
-+ /* Turn off all host-specific interrupts. */
-+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-+
-+ /*
-+ * The root hub should be disconnected before this function is called.
-+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
-+ * and the QH lists (via ..._hcd_endpoint_disable).
-+ */
-+
-+ /* Turn off the vbus power */
-+ DWC_PRINT("PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+}
-+
-+/** Returns the current frame number. */
-+int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ hfnum_data_t hfnum;
-+
-+ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
-+ host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-+#endif
-+ return hfnum.b.frnum;
-+}
-+
-+/**
-+ * Frees secondary storage associated with the dwc_otg_hcd structure contained
-+ * in the struct usb_hcd field.
-+ */
-+void dwc_otg_hcd_free(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /* Free memory for QH/QTD lists */
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-+
-+ /* Free memory for the host channels. */
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
-+ if (hc != NULL) {
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
-+ kfree(hc);
-+ }
-+ }
-+
-+ if (dwc_otg_hcd->core_if->dma_enable) {
-+ if (dwc_otg_hcd->status_buf_dma) {
-+ dma_free_coherent(hcd->self.controller,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ dwc_otg_hcd->status_buf,
-+ dwc_otg_hcd->status_buf_dma);
-+ }
-+ } else if (dwc_otg_hcd->status_buf != NULL) {
-+ kfree(dwc_otg_hcd->status_buf);
-+ }
-+}
-+
-+#ifdef DEBUG
-+static void dump_urb_info(struct urb *urb, char* fn_name)
-+{
-+ DWC_PRINT("%s, urb %p\n", fn_name, urb);
-+ DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_PRINT(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_PRINT(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_PRINT(" Interval: %d\n", urb->interval);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d:\n", i);
-+ DWC_PRINT(" offset: %d, length %d\n",
-+ urb->iso_frame_desc[i].offset,
-+ urb->iso_frame_desc[i].length);
-+ }
-+ }
-+}
-+
-+static void dump_channel_info(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh)
-+{
-+ if (qh->channel != NULL) {
-+ dwc_hc_t *hc = qh->channel;
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh_item;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ int i;
-+
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+
-+ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&hc_regs->hcdma);
-+
-+ DWC_PRINT(" Assigned to channel %p:\n", hc);
-+ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ DWC_PRINT(" NP inactive sched:\n");
-+ list_for_each(item, &hcd->non_periodic_sched_inactive) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ }
-+ DWC_PRINT(" NP active sched:\n");
-+ list_for_each(item, &hcd->non_periodic_sched_active) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ }
-+ DWC_PRINT(" Channels: \n");
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINT(" %2d: %p\n", i, hc);
-+ }
-+ }
-+}
-+#endif
-+
-+/** Starts processing a USB transfer request specified by a USB Request Block
-+ * (URB). mem_flags indicates the type of memory allocation to use while
-+ * processing this URB. */
-+int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-+ struct urb *urb,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int mem_flags
-+#else
-+ gfp_t mem_flags
-+#endif
-+ )
-+{
-+ int retval = 0;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_qtd_t *qtd;
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue");
-+ }
-+#endif
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /* No longer connected. */
-+ return -ENODEV;
-+ }
-+
-+ qtd = dwc_otg_hcd_qtd_create(urb);
-+ if (qtd == NULL) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
-+ return -ENOMEM;
-+ }
-+
-+ retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd);
-+ if (retval < 0) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
-+ "Error status %d\n", retval);
-+ dwc_otg_hcd_qtd_free(qtd);
-+ }
-+
-+ return retval;
-+}
-+
-+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
-+ * success. */
-+int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-+ struct urb *urb,
-+ int status)
-+{
-+ unsigned long flags;
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ dwc_otg_qtd_t *urb_qtd;
-+ dwc_otg_qh_t *qh;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-+
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+
-+ urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv;
-+ qh = (dwc_otg_qh_t *)ep->hcpriv;
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue");
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dump_channel_info(dwc_otg_hcd, qh);
-+ }
-+ }
-+#endif
-+
-+ if (urb_qtd == qh->qtd_in_process) {
-+ /* The QTD is in process (it has been assigned to a channel). */
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * If still connected (i.e. in host mode), halt the
-+ * channel so it can be used for other transfers. If
-+ * no longer connected, the host registers can't be
-+ * written to halt the channel since the core is in
-+ * device mode.
-+ */
-+ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE);
-+ }
-+ }
-+
-+ /*
-+ * Free the QTD and clean up the associated QH. Leave the QH in the
-+ * schedule if it has any remaining QTDs.
-+ */
-+ dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd);
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
-+ qh->channel = NULL;
-+ qh->qtd_in_process = NULL;
-+ } else if (list_empty(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+ urb->hcpriv = NULL;
-+
-+ /* Higher layer software sets URB status. */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ usb_hcd_giveback_urb(hcd, urb, status);
-+#else
-+ usb_hcd_giveback_urb(hcd, urb, NULL);
-+#endif
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("Called usb_hcd_giveback_urb()\n");
-+ DWC_PRINT(" urb->status = %d\n", urb->status);
-+ }
-+
-+ return 0;
-+}
-+
-+/** Frees resources in the DWC_otg controller related to a given endpoint. Also
-+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
-+ * must already be dequeued. */
-+void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_qh_t *qh;
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ unsigned long flags;
-+ int retry = 0;
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-+ "endpoint=%d\n", ep->desc.bEndpointAddress,
-+ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+rescan:
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+ qh = (dwc_otg_qh_t *)(ep->hcpriv);
-+ if (!qh)
-+ goto done;
-+
-+ /** Check that the QTD list is really empty */
-+ if (!list_empty(&qh->qtd_list)) {
-+ if (retry++ < 250) {
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+ schedule_timeout_uninterruptible(1);
-+ goto rescan;
-+ }
-+
-+ DWC_WARN("DWC OTG HCD EP DISABLE:"
-+ " QTD List for this endpoint is not empty\n");
-+ }
-+
-+ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-+ ep->hcpriv = NULL;
-+done:
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+#else // LINUX_VERSION_CODE
-+
-+ qh = (dwc_otg_qh_t *)(ep->hcpriv);
-+ if (qh != NULL) {
-+#ifdef DEBUG
-+ /** Check that the QTD list is really empty */
-+ if (!list_empty(&qh->qtd_list)) {
-+ DWC_WARN("DWC OTG HCD EP DISABLE:"
-+ " QTD List for this endpoint is not empty\n");
-+ }
-+#endif
-+ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-+ ep->hcpriv = NULL;
-+ }
-+#endif // LINUX_VERSION_CODE
-+}
-+
-+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
-+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
-+ * interrupt.
-+ *
-+ * This function is called by the USB core when an interrupt occurs */
-+irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *regs
-+#endif
-+ )
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
-+}
-+
-+/** Creates Status Change bitmap for the root hub and root port. The bitmap is
-+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
-+ * is the status change indicator for the single root port. Returns 1 if either
-+ * change indicator is 1, otherwise returns 0. */
-+int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ buf[0] = 0;
-+ buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
-+ dwc_otg_hcd->flags.b.port_reset_change ||
-+ dwc_otg_hcd->flags.b.port_enable_change ||
-+ dwc_otg_hcd->flags.b.port_suspend_change ||
-+ dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-+
-+#ifdef DEBUG
-+ if (buf[0]) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
-+ " Root port status changed\n");
-+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_connect_status_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_reset_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_enable_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_suspend_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_over_current_change);
-+ }
-+#endif
-+ return (buf[0] != 0);
-+}
-+
-+#ifdef DWC_HS_ELECT_TST
-+/*
-+ * Quick and dirty hack to implement the HS Electrical Test
-+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
-+ *
-+ * This code was copied from our userspace app "hset". It sends a
-+ * Get Device Descriptor control sequence in two parts, first the
-+ * Setup packet by itself, followed some time later by the In and
-+ * Ack packets. Rather than trying to figure out how to add this
-+ * functionality to the normal driver code, we just hijack the
-+ * hardware, using these two function to drive the hardware
-+ * directly.
-+ */
-+
-+dwc_otg_core_global_regs_t *global_regs;
-+dwc_otg_host_global_regs_t *hc_global_regs;
-+dwc_otg_hc_regs_t *hc_regs;
-+uint32_t *data_fifo;
-+
-+static void do_setup(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Send Setup packet (Get Device Descriptor)
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+// hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ /* Fill FIFO with Setup data for Get Device Descriptor */
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+ dwc_write_reg32(data_fifo++, 0x01000680);
-+ dwc_write_reg32(data_fifo++, 0x00080000);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+
-+static void do_in_ack(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+ host_grxsts_data_t grxsts;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Receive Control In packet
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 1;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer */
-+ if (grxsts.b.bcnt > 0) {
-+ int i;
-+ int word_count = (grxsts.b.bcnt + 3) / 4;
-+
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ for (i = 0; i < word_count; i++) {
-+ (void)dwc_read_reg32(data_fifo++);
-+ }
-+ }
-+
-+ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+// usleep(100000);
-+// mdelay(100);
-+ mdelay(1);
-+
-+ /*
-+ * Send handshake packet
-+ */
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 0;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+#endif /* DWC_HS_ELECT_TST */
-+
-+/** Handles hub class-specific requests. */
-+int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if;
-+ struct usb_hub_descriptor *desc;
-+ hprt0_data_t hprt0 = {.d32 = 0};
-+
-+ uint32_t port_status;
-+
-+ switch (typeReq) {
-+ case ClearHubFeature:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearHubFeature 0x%x\n", wValue);
-+ switch (wValue) {
-+ case C_HUB_LOCAL_POWER:
-+ case C_HUB_OVER_CURRENT:
-+ /* Nothing required here */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearHubFeature request %xh unknown\n", wValue);
-+ }
-+ break;
-+ case ClearPortFeature:
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ switch (wValue) {
-+ case USB_PORT_FEAT_ENABLE:
-+ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtena = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ /* Clear Resume bit */
-+ mdelay(100);
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-+ /* Port inidicator not supported */
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ /* Clears drivers internal connect status change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ /* Clears the driver's internal Port Reset Change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-+ dwc_otg_hcd->flags.b.port_reset_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_ENABLE:
-+ /* Clears the driver's internal Port
-+ * Enable/Disable Change flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-+ dwc_otg_hcd->flags.b.port_enable_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ /* Clears the driver's internal Port Suspend
-+ * Change flag, which is set when resume signaling on
-+ * the host port is complete */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-+ dwc_otg_hcd->flags.b.port_suspend_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-+ dwc_otg_hcd->flags.b.port_over_current_change = 0;
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ }
-+ break;
-+ case GetHubDescriptor:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubDescriptor\n");
-+ desc = (struct usb_hub_descriptor *)buf;
-+ desc->bDescLength = 9;
-+ desc->bDescriptorType = 0x29;
-+ desc->bNbrPorts = 1;
-+ desc->wHubCharacteristics = 0x08;
-+ desc->bPwrOn2PwrGood = 1;
-+ desc->bHubContrCurrent = 0;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39)
-+ desc->u.hs.DeviceRemovable[0] = 0;
-+ desc->u.hs.DeviceRemovable[1] = 0xff;
-+#endif
-+ break;
-+ case GetHubStatus:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubStatus\n");
-+ memset(buf, 0, 4);
-+ break;
-+ case GetPortStatus:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetPortStatus\n");
-+
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ port_status = 0;
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-+
-+ if (dwc_otg_hcd->flags.b.port_enable_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-+
-+ if (dwc_otg_hcd->flags.b.port_suspend_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-+
-+ if (dwc_otg_hcd->flags.b.port_reset_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_RESET);
-+
-+ if (dwc_otg_hcd->flags.b.port_over_current_change) {
-+ DWC_ERROR("Device Not Supported\n");
-+ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
-+ }
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return 0's for the remainder of the port status
-+ * since the port register can't be read if the core
-+ * is in device mode.
-+ */
-+ *((__le32 *) buf) = cpu_to_le32(port_status);
-+ break;
-+ }
-+
-+ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
-+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-+
-+ if (hprt0.b.prtconnsts)
-+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-+
-+ if (hprt0.b.prtena)
-+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
-+
-+ if (hprt0.b.prtsusp)
-+ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-+
-+ if (hprt0.b.prtovrcurract)
-+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-+
-+ if (hprt0.b.prtrst)
-+ port_status |= (1 << USB_PORT_FEAT_RESET);
-+
-+ if (hprt0.b.prtpwr)
-+ port_status |= (1 << USB_PORT_FEAT_POWER);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-+ port_status |= USB_PORT_STAT_HIGH_SPEED;
-+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
-+ port_status |= USB_PORT_STAT_LOW_SPEED;
-+
-+ if (hprt0.b.prttstctl)
-+ port_status |= (1 << USB_PORT_FEAT_TEST);
-+
-+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-+
-+ *((__le32 *) buf) = cpu_to_le32(port_status);
-+
-+ break;
-+ case SetHubFeature:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetHubFeature\n");
-+ /* No HUB features supported */
-+ break;
-+ case SetPortFeature:
-+ if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1))
-+ goto error;
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return without doing anything since the port
-+ * register can't be written if the core is in device
-+ * mode.
-+ */
-+ break;
-+ }
-+
-+ switch (wValue) {
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-+ if (hcd->self.otg_port == wIndex &&
-+ hcd->self.b_hnp_enable) {
-+ gotgctl_data_t gotgctl = {.d32=0};
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-+ 0, gotgctl.d32);
-+ core_if->op_state = A_SUSPEND;
-+ }
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32);
-+ /* Suspend the Phy Clock */
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
-+ }
-+
-+ /* For HNP the bus must be suspended for at least 200ms. */
-+ if (hcd->self.b_hnp_enable) {
-+ mdelay(200);
-+ //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state);
-+ }
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_RESET:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ /* When B-Host the Port reset bit is set in
-+ * the Start HCD Callback function, so that
-+ * the reset is started within 1ms of the HNP
-+ * success interrupt. */
-+ if (!hcd->self.is_b_host) {
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-+ MDELAY(60);
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+
-+#ifdef DWC_HS_ELECT_TST
-+ case USB_PORT_FEAT_TEST:
-+ {
-+ uint32_t t;
-+ gintmsk_data_t gintmsk;
-+
-+ t = (wIndex >> 8); /* MSB wIndex USB */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
-+ warn("USB_PORT_FEAT_TEST %d\n", t);
-+ if (t < 6) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prttstctl = t;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ } else {
-+ /* Setup global vars with reg addresses (quick and
-+ * dirty hack, should be cleaned up)
-+ */
-+ global_regs = core_if->core_global_regs;
-+ hc_global_regs = core_if->host_if->host_global_regs;
-+ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive suspend on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive resume on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 0;
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay(100);
-+
-+ /* Clear the resume bit */
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Send the In and Ack packets */
-+ do_in_ack();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ }
-+ }
-+ break;
-+ }
-+#endif /* DWC_HS_ELECT_TST */
-+
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-+ /* Not supported */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "SetPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ break;
-+ }
-+ break;
-+ default:
-+ error:
-+ retval = -EINVAL;
-+ DWC_WARN("DWC OTG HCD - "
-+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-+ typeReq, wIndex, wValue);
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Assigns transactions from a QTD to a free host channel and initializes the
-+ * host channel to perform the transactions. The host channel is removed from
-+ * the free list.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param qh Transactions from the first QTD for this QH are selected and
-+ * assigned to a free host channel.
-+ */
-+static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ dwc_hc_t *hc;
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh);
-+
-+ hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-+
-+ /* Remove the host channel from the free list. */
-+ list_del_init(&hc->hc_list_entry);
-+
-+ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+ urb = qtd->urb;
-+ qh->channel = hc;
-+ qh->qtd_in_process = qtd;
-+
-+ /*
-+ * Use usb_pipedevice to determine device address. This address is
-+ * 0 before the SET_ADDRESS command and the correct address afterward.
-+ */
-+ hc->dev_addr = usb_pipedevice(urb->pipe);
-+ hc->ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (urb->dev->speed == USB_SPEED_LOW) {
-+ hc->speed = DWC_OTG_EP_SPEED_LOW;
-+ } else if (urb->dev->speed == USB_SPEED_FULL) {
-+ hc->speed = DWC_OTG_EP_SPEED_FULL;
-+ } else {
-+ hc->speed = DWC_OTG_EP_SPEED_HIGH;
-+ }
-+
-+ hc->max_packet = dwc_max_packet(qh->maxp);
-+
-+ hc->xfer_started = 0;
-+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
-+ hc->error_state = (qtd->error_count > 0);
-+ hc->halt_on_queue = 0;
-+ hc->halt_pending = 0;
-+ hc->requests = 0;
-+
-+ /*
-+ * The following values may be modified in the transfer type section
-+ * below. The xfer_len value may be reduced when the transfer is
-+ * started to accommodate the max widths of the XferSize and PktCnt
-+ * fields in the HCTSIZn register.
-+ */
-+ hc->do_ping = qh->ping_state;
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
-+ hc->data_pid_start = qh->data_toggle;
-+ hc->multi_count = 1;
-+
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
-+ }
-+ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
-+ hc->xfer_count = 0;
-+
-+ /*
-+ * Set the split attributes
-+ */
-+ hc->do_split = 0;
-+ if (qh->do_split) {
-+ hc->do_split = 1;
-+ hc->xact_pos = qtd->isoc_split_pos;
-+ hc->complete_split = qtd->complete_split;
-+ hc->hub_addr = urb->dev->tt->hub->devnum;
-+ hc->port_addr = urb->dev->ttport;
-+ }
-+
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
-+ hc->do_ping = 0;
-+ hc->ep_is_in = 0;
-+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->setup_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->setup_packet;
-+ }
-+ hc->xfer_len = 8;
-+ break;
-+ case DWC_OTG_CONTROL_DATA:
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
-+ hc->data_pid_start = qtd->data_toggle;
-+ break;
-+ case DWC_OTG_CONTROL_STATUS:
-+ /*
-+ * Direction is opposite of data direction or IN if no
-+ * data.
-+ */
-+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
-+ if (urb->transfer_buffer_length == 0) {
-+ hc->ep_is_in = 1;
-+ } else {
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
-+ }
-+ if (hc->ep_is_in) {
-+ hc->do_ping = 0;
-+ }
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ hc->xfer_len = 0;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)hcd->status_buf_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)hcd->status_buf;
-+ }
-+ break;
-+ }
-+ break;
-+ case PIPE_BULK:
-+ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
-+ break;
-+ case PIPE_INTERRUPT:
-+ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
-+ }
-+ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
-+ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-+
-+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ if (hc->xfer_len <= 188) {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ }
-+ else {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
-+ }
-+ }
-+ }
-+ break;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This value may be modified when the transfer is started to
-+ * reflect the actual transfer length.
-+ */
-+ hc->multi_count = dwc_hb_mult(qh->maxp);
-+ }
-+
-+ dwc_otg_hc_init(hcd->core_if, hc);
-+ hc->qh = qh;
-+}
-+
-+/**
-+ * This function selects transactions from the HCD transfer schedule and
-+ * assigns them to available host channels. It is called from HCD interrupt
-+ * handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ *
-+ * @return The types of new transactions that were assigned to host channels.
-+ */
-+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd)
-+{
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int num_channels;
-+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
-+#endif
-+
-+ /* Process entries in the periodic ready list. */
-+ qh_ptr = hcd->periodic_sched_ready.next;
-+ while (qh_ptr != &hcd->periodic_sched_ready &&
-+ !list_empty(&hcd->free_hc_list)) {
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the periodic ready schedule to the
-+ * periodic assigned schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned);
-+
-+ ret_val = DWC_OTG_TRANSACTION_PERIODIC;
-+ }
-+
-+ /*
-+ * Process entries in the inactive portion of the non-periodic
-+ * schedule. Some free host channels may not be used if they are
-+ * reserved for periodic transfers.
-+ */
-+ qh_ptr = hcd->non_periodic_sched_inactive.next;
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ while (qh_ptr != &hcd->non_periodic_sched_inactive &&
-+ (hcd->non_periodic_channels <
-+ num_channels - hcd->periodic_channels) &&
-+ !list_empty(&hcd->free_hc_list)) {
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the non-periodic inactive schedule to the
-+ * non-periodic active schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active);
-+
-+ if (ret_val == DWC_OTG_TRANSACTION_NONE) {
-+ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
-+ } else {
-+ ret_val = DWC_OTG_TRANSACTION_ALL;
-+ }
-+
-+ hcd->non_periodic_channels++;
-+ }
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Attempts to queue a single transaction request for a host channel
-+ * associated with either a periodic or non-periodic transfer. This function
-+ * assumes that there is space available in the appropriate request queue. For
-+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
-+ * is available in the appropriate Tx FIFO.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc Host channel descriptor associated with either a periodic or
-+ * non-periodic transfer.
-+ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
-+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
-+ * transfers.
-+ *
-+ * @return 1 if a request is queued and more requests may be needed to
-+ * complete the transfer, 0 if no more requests are required for this
-+ * transfer, -1 if there is insufficient space in the Tx FIFO.
-+ */
-+static int queue_transaction(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ uint16_t fifo_dwords_avail)
-+{
-+ int retval;
-+
-+ if (hcd->core_if->dma_enable) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ hc->qh->ping_state = 0;
-+ }
-+ retval = 0;
-+ } else if (hc->halt_pending) {
-+ /* Don't queue a request if the channel has been halted. */
-+ retval = 0;
-+ } else if (hc->halt_on_queue) {
-+ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
-+ retval = 0;
-+ } else if (hc->do_ping) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ }
-+ retval = 0;
-+ } else if (!hc->ep_is_in ||
-+ hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ if ((fifo_dwords_avail * 4) >= hc->max_packet) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-+ }
-+ } else {
-+ retval = -1;
-+ }
-+ } else {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Processes active non-periodic channels and queues transactions for these
-+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
-+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
-+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
-+ * FIFO Empty interrupt is disabled.
-+ */
-+static void process_non_periodic_channels(dwc_otg_hcd_t *hcd)
-+{
-+ gnptxsts_data_t tx_status;
-+ struct list_head *orig_qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+ int more_to_do = 0;
-+
-+ dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ /*
-+ * Keep track of the starting point. Skip over the start-of-list
-+ * entry.
-+ */
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+ orig_qh_ptr = hcd->non_periodic_qh_ptr;
-+
-+ /*
-+ * Process once through the active list or until no more space is
-+ * available in the request queue or the Tx FIFO.
-+ */
-+ do {
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail);
-+
-+ if (status > 0) {
-+ more_to_do = 1;
-+ } else if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /* Advance to next QH, skipping start-of-list entry. */
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+
-+ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
-+
-+ if (!hcd->core_if->dma_enable) {
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+ intr_mask.b.nptxfempty = 1;
-+
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ if (more_to_do || no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the non-periodic
-+ * Tx FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Processes periodic channels for the next frame and queues transactions for
-+ * these channels to the DWC_otg controller. After queueing transactions, the
-+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
-+ * to queue as Periodic Tx FIFO or request queue space becomes available.
-+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
-+ */
-+static void process_periodic_channels(dwc_otg_hcd_t *hcd)
-+{
-+ hptxsts_data_t tx_status;
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+
-+ dwc_otg_host_global_regs_t *host_regs;
-+ host_regs = hcd->core_if->host_if->host_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+
-+ qh_ptr = hcd->periodic_sched_assigned.next;
-+ while (qh_ptr != &hcd->periodic_sched_assigned) {
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ if (tx_status.b.ptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+
-+ /*
-+ * Set a flag if we're queuing high-bandwidth in slave mode.
-+ * The flag prevents any halts to get into the request queue in
-+ * the middle of multiple high-bandwidth packets getting queued.
-+ */
-+ if (!hcd->core_if->dma_enable &&
-+ qh->channel->multi_count > 1)
-+ {
-+ hcd->core_if->queuing_high_bandwidth = 1;
-+ }
-+
-+ status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail);
-+ if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /*
-+ * In Slave mode, stay on the current transfer until there is
-+ * nothing more to do or the high-bandwidth request count is
-+ * reached. In DMA mode, only need to queue one request. The
-+ * controller automatically handles multiple packets for
-+ * high-bandwidth transfers.
-+ */
-+ if (hcd->core_if->dma_enable || status == 0 ||
-+ qh->channel->requests == qh->channel->multi_count) {
-+ qh_ptr = qh_ptr->next;
-+ /*
-+ * Move the QH from the periodic assigned schedule to
-+ * the periodic queued schedule.
-+ */
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued);
-+
-+ /* done queuing high bandwidth */
-+ hcd->core_if->queuing_high_bandwidth = 0;
-+ }
-+ }
-+
-+ if (!hcd->core_if->dma_enable) {
-+ dwc_otg_core_global_regs_t *global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ global_regs = hcd->core_if->core_global_regs;
-+ intr_mask.b.ptxfempty = 1;
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+ if (!list_empty(&hcd->periodic_sched_assigned) ||
-+ no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the periodic Tx
-+ * FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function processes the currently active host channels and queues
-+ * transactions for these channels to the DWC_otg controller. It is called
-+ * from HCD interrupt handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param tr_type The type(s) of transactions to queue (non-periodic,
-+ * periodic, or both).
-+ */
-+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-+ dwc_otg_transaction_type_e tr_type)
-+{
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-+#endif
-+ /* Process host channels associated with periodic transfers. */
-+ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) &&
-+ !list_empty(&hcd->periodic_sched_assigned)) {
-+
-+ process_periodic_channels(hcd);
-+ }
-+
-+ /* Process host channels associated with non-periodic transfers. */
-+ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) {
-+ if (!list_empty(&hcd->non_periodic_sched_active)) {
-+ process_non_periodic_channels(hcd);
-+ } else {
-+ /*
-+ * Ensure NP Tx FIFO empty interrupt is disabled when
-+ * there are no non-periodic transfers to process.
-+ */
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Sets the final status of an URB and returns it to the device driver. Any
-+ * required cleanup of the URB is performed.
-+ */
-+void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status)
-+{
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
-+ __func__, urb, usb_pipedevice(urb->pipe),
-+ usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT", status);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d status: %d\n",
-+ i, urb->iso_frame_desc[i].status);
-+ }
-+ }
-+ }
-+#endif
-+
-+ urb->status = status;
-+ urb->hcpriv = NULL;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
-+#else
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL);
-+#endif
-+}
-+
-+/*
-+ * Returns the Queue Head for an URB.
-+ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb)
-+{
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-+ return (dwc_otg_qh_t *)ep->hcpriv;
-+}
-+
-+#ifdef DEBUG
-+void dwc_print_setup_data(uint8_t *setup)
-+{
-+ int i;
-+ if (CHK_DEBUG_LEVEL(DBG_HCD)){
-+ DWC_PRINT("Setup Data = MSB ");
-+ for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]);
-+ DWC_PRINT("\n");
-+ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device");
-+ DWC_PRINT(" bmRequestType Type = ");
-+ switch ((setup[0] & 0x60) >> 5) {
-+ case 0: DWC_PRINT("Standard\n"); break;
-+ case 1: DWC_PRINT("Class\n"); break;
-+ case 2: DWC_PRINT("Vendor\n"); break;
-+ case 3: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bmRequestType Recipient = ");
-+ switch (setup[0] & 0x1f) {
-+ case 0: DWC_PRINT("Device\n"); break;
-+ case 1: DWC_PRINT("Interface\n"); break;
-+ case 2: DWC_PRINT("Endpoint\n"); break;
-+ case 3: DWC_PRINT("Other\n"); break;
-+ default: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
-+ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
-+ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
-+ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
-+ }
-+}
-+#endif
-+
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) {
-+#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ DWC_PRINT("Frame remaining at SOF:\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->frrem_samples, hcd->frrem_accum,
-+ (hcd->frrem_samples > 0) ?
-+ hcd->frrem_accum/hcd->frrem_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum,
-+ (hcd->core_if->hfnum_7_samples > 0) ?
-+ hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum,
-+ (hcd->core_if->hfnum_0_samples > 0) ?
-+ hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum,
-+ (hcd->core_if->hfnum_other_samples > 0) ?
-+ hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
-+ (hcd->hfnum_7_samples_a > 0) ?
-+ hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
-+ (hcd->hfnum_0_samples_a > 0) ?
-+ hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
-+ (hcd->hfnum_other_samples_a > 0) ?
-+ hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
-+ (hcd->hfnum_7_samples_b > 0) ?
-+ hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
-+ (hcd->hfnum_0_samples_b > 0) ?
-+ hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
-+ (hcd->hfnum_other_samples_b > 0) ?
-+ hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0);
-+#endif
-+}
-+
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd)
-+{
-+#ifdef DEBUG
-+ int num_channels;
-+ int i;
-+ gnptxsts_data_t np_tx_status;
-+ hptxsts_data_t p_tx_status;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ DWC_PRINT("\n");
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("HCD State:\n");
-+ DWC_PRINT(" Num channels: %d\n", num_channels);
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINT(" Channel %d:\n", i);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" speed: %d\n", hc->speed);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" multi_count: %d\n", hc->multi_count);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
-+ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" do_split: %d\n", hc->do_split);
-+ DWC_PRINT(" complete_split: %d\n", hc->complete_split);
-+ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
-+ DWC_PRINT(" port_addr: %d\n", hc->port_addr);
-+ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
-+ DWC_PRINT(" requests: %d\n", hc->requests);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ if (hc->xfer_started) {
-+ hfnum_data_t hfnum;
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+ hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk);
-+ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
-+ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
-+ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
-+ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
-+ }
-+ if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) {
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+ qtd = hc->qh->qtd_in_process;
-+ urb = qtd->urb;
-+ DWC_PRINT(" URB Info:\n");
-+ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
-+ if (urb) {
-+ DWC_PRINT(" Dev: %d, EP: %d %s\n",
-+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT");
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
-+ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
-+ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINT(" actual_length: %d\n", urb->actual_length);
-+ }
-+ }
-+ }
-+ DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels);
-+ DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels);
-+ DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs);
-+ np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts);
-+ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
-+ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
-+ p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts);
-+ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
-+ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
-+ dwc_otg_hcd_dump_frrem(hcd);
-+ dwc_otg_dump_global_registers(hcd->core_if);
-+ dwc_otg_dump_host_registers(hcd->core_if);
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("\n");
-+#endif
-+}
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
-@@ -0,0 +1,668 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
-+ * $Revision: 1.3 $
-+ * $Date: 2008-12-15 06:51:32 $
-+ * $Change: 1064918 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+#ifndef __DWC_HCD_H__
-+#define __DWC_HCD_H__
-+
-+#include <linux/list.h>
-+#include <linux/usb.h>
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35)
-+#include <linux/usb/hcd.h>
-+#else
-+#include <../drivers/usb/core/hcd.h>
-+#endif
-+
-+struct dwc_otg_device;
-+
-+#include "dwc_otg_cil.h"
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Host Contoller Driver (HCD).
-+ *
-+ * The Host Controller Driver (HCD) is responsible for translating requests
-+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
-+ * It isolates the USBD from the specifics of the controller by providing an
-+ * API to the USBD.
-+ */
-+
-+/**
-+ * Phases for control transfers.
-+ */
-+typedef enum dwc_otg_control_phase {
-+ DWC_OTG_CONTROL_SETUP,
-+ DWC_OTG_CONTROL_DATA,
-+ DWC_OTG_CONTROL_STATUS
-+} dwc_otg_control_phase_e;
-+
-+/** Transaction types. */
-+typedef enum dwc_otg_transaction_type {
-+ DWC_OTG_TRANSACTION_NONE,
-+ DWC_OTG_TRANSACTION_PERIODIC,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC,
-+ DWC_OTG_TRANSACTION_ALL
-+} dwc_otg_transaction_type_e;
-+
-+/**
-+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
-+ * interrupt, or isochronous transfer. A single QTD is created for each URB
-+ * (of one of these types) submitted to the HCD. The transfer associated with
-+ * a QTD may require one or multiple transactions.
-+ *
-+ * A QTD is linked to a Queue Head, which is entered in either the
-+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
-+ * execution, some or all of its transactions may be executed. After
-+ * execution, the state of the QTD is updated. The QTD may be retired if all
-+ * its transactions are complete or if an error occurred. Otherwise, it
-+ * remains in the schedule so more transactions can be executed later.
-+ */
-+typedef struct dwc_otg_qtd {
-+ /**
-+ * Determines the PID of the next data packet for the data phase of
-+ * control transfers. Ignored for other transfer types.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Current phase for control transfers (Setup, Data, or Status). */
-+ dwc_otg_control_phase_e control_phase;
-+
-+ /** Keep track of the current split type
-+ * for FS/LS endpoints on a HS Hub */
-+ uint8_t complete_split;
-+
-+ /** How many bytes transferred during SSPLIT OUT */
-+ uint32_t ssplit_out_xfer_count;
-+
-+ /**
-+ * Holds the number of bus errors that have occurred for a transaction
-+ * within this transfer.
-+ */
-+ uint8_t error_count;
-+
-+ /**
-+ * Index of the next frame descriptor for an isochronous transfer. A
-+ * frame descriptor describes the buffer position and length of the
-+ * data to be transferred in the next scheduled (micro)frame of an
-+ * isochronous transfer. It also holds status for that transaction.
-+ * The frame index starts at 0.
-+ */
-+ int isoc_frame_index;
-+
-+ /** Position of the ISOC split on full/low speed */
-+ uint8_t isoc_split_pos;
-+
-+ /** Position of the ISOC split in the buffer for the current frame */
-+ uint16_t isoc_split_offset;
-+
-+ /** URB for this transfer */
-+ struct urb *urb;
-+
-+ /** This list of QTDs */
-+ struct list_head qtd_list_entry;
-+
-+} dwc_otg_qtd_t;
-+
-+/**
-+ * A Queue Head (QH) holds the static characteristics of an endpoint and
-+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
-+ * be entered in either the non-periodic or periodic schedule.
-+ */
-+typedef struct dwc_otg_qh {
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - USB_ENDPOINT_XFER_CONTROL
-+ * - USB_ENDPOINT_XFER_ISOC
-+ * - USB_ENDPOINT_XFER_BULK
-+ * - USB_ENDPOINT_XFER_INT
-+ */
-+ uint8_t ep_type;
-+ uint8_t ep_is_in;
-+
-+ /** wMaxPacketSize Field of Endpoint Descriptor. */
-+ uint16_t maxp;
-+
-+ /**
-+ * Determines the PID of the next data packet for non-control
-+ * transfers. Ignored for control transfers.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Ping state if 1. */
-+ uint8_t ping_state;
-+
-+ /**
-+ * List of QTDs for this QH.
-+ */
-+ struct list_head qtd_list;
-+
-+ /** Host channel currently processing transfers for this QH. */
-+ dwc_hc_t *channel;
-+
-+ /** QTD currently assigned to a host channel for this QH. */
-+ dwc_otg_qtd_t *qtd_in_process;
-+
-+ /** Full/low speed endpoint on high-speed hub requires split. */
-+ uint8_t do_split;
-+
-+ /** @name Periodic schedule information */
-+ /** @{ */
-+
-+ /** Bandwidth in microseconds per (micro)frame. */
-+ uint8_t usecs;
-+
-+ /** Interval between transfers in (micro)frames. */
-+ uint16_t interval;
-+
-+ /**
-+ * (micro)frame to initialize a periodic transfer. The transfer
-+ * executes in the following (micro)frame.
-+ */
-+ uint16_t sched_frame;
-+
-+ /** (micro)frame at which last start split was initialized. */
-+ uint16_t start_split_frame;
-+
-+ /** @} */
-+
-+ /** Entry for QH in either the periodic or non-periodic schedule. */
-+ struct list_head qh_list_entry;
-+
-+ /* For non-dword aligned buffer support */
-+ uint8_t *dw_align_buf;
-+ dma_addr_t dw_align_buf_dma;
-+} dwc_otg_qh_t;
-+
-+/**
-+ * This structure holds the state of the HCD, including the non-periodic and
-+ * periodic schedules.
-+ */
-+typedef struct dwc_otg_hcd {
-+ /** The DWC otg device pointer */
-+ struct dwc_otg_device *otg_dev;
-+
-+ /** DWC OTG Core Interface Layer */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Internal DWC HCD Flags */
-+ volatile union dwc_otg_hcd_internal_flags {
-+ uint32_t d32;
-+ struct {
-+ unsigned port_connect_status_change : 1;
-+ unsigned port_connect_status : 1;
-+ unsigned port_reset_change : 1;
-+ unsigned port_enable_change : 1;
-+ unsigned port_suspend_change : 1;
-+ unsigned port_over_current_change : 1;
-+ unsigned reserved : 27;
-+ } b;
-+ } flags;
-+
-+ /**
-+ * Inactive items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are not
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_inactive;
-+
-+ /**
-+ * Active items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_active;
-+
-+ /**
-+ * Pointer to the next Queue Head to process in the active
-+ * non-periodic schedule.
-+ */
-+ struct list_head *non_periodic_qh_ptr;
-+
-+ /**
-+ * Inactive items in the periodic schedule. This is a list of QHs for
-+ * periodic transfers that are _not_ scheduled for the next frame.
-+ * Each QH in the list has an interval counter that determines when it
-+ * needs to be scheduled for execution. This scheduling mechanism
-+ * allows only a simple calculation for periodic bandwidth used (i.e.
-+ * must assume that all periodic transfers may need to execute in the
-+ * same frame). However, it greatly simplifies scheduling and should
-+ * be sufficient for the vast majority of OTG hosts, which need to
-+ * connect to a small number of peripherals at one time.
-+ *
-+ * Items move from this list to periodic_sched_ready when the QH
-+ * interval counter is 0 at SOF.
-+ */
-+ struct list_head periodic_sched_inactive;
-+
-+ /**
-+ * List of periodic QHs that are ready for execution in the next
-+ * frame, but have not yet been assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_assigned as host
-+ * channels become available during the current frame.
-+ */
-+ struct list_head periodic_sched_ready;
-+
-+ /**
-+ * List of periodic QHs to be executed in the next frame that are
-+ * assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_queued as the
-+ * transactions for the QH are queued to the DWC_otg controller.
-+ */
-+ struct list_head periodic_sched_assigned;
-+
-+ /**
-+ * List of periodic QHs that have been queued for execution.
-+ *
-+ * Items move from this list to either periodic_sched_inactive or
-+ * periodic_sched_ready when the channel associated with the transfer
-+ * is released. If the interval for the QH is 1, the item moves to
-+ * periodic_sched_ready because it must be rescheduled for the next
-+ * frame. Otherwise, the item moves to periodic_sched_inactive.
-+ */
-+ struct list_head periodic_sched_queued;
-+
-+ /**
-+ * Total bandwidth claimed so far for periodic transfers. This value
-+ * is in microseconds per (micro)frame. The assumption is that all
-+ * periodic transfers may occur in the same (micro)frame.
-+ */
-+ uint16_t periodic_usecs;
-+
-+ /**
-+ * Frame number read from the core at SOF. The value ranges from 0 to
-+ * DWC_HFNUM_MAX_FRNUM.
-+ */
-+ uint16_t frame_number;
-+
-+ /**
-+ * Free host channels in the controller. This is a list of
-+ * dwc_hc_t items.
-+ */
-+ struct list_head free_hc_list;
-+
-+ /**
-+ * Number of host channels assigned to periodic transfers. Currently
-+ * assuming that there is a dedicated host channel for each periodic
-+ * transaction and at least one host channel available for
-+ * non-periodic transactions.
-+ */
-+ int periodic_channels;
-+
-+ /**
-+ * Number of host channels assigned to non-periodic transfers.
-+ */
-+ int non_periodic_channels;
-+
-+ /**
-+ * Array of pointers to the host channel descriptors. Allows accessing
-+ * a host channel descriptor given the host channel number. This is
-+ * useful in interrupt handlers.
-+ */
-+ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
-+
-+ /**
-+ * Buffer to use for any data received during the status phase of a
-+ * control transfer. Normally no data is transferred during the status
-+ * phase. This buffer is used as a bit bucket.
-+ */
-+ uint8_t *status_buf;
-+
-+ /**
-+ * DMA address for status_buf.
-+ */
-+ dma_addr_t status_buf_dma;
-+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-+
-+ /**
-+ * Structure to allow starting the HCD in a non-interrupt context
-+ * during an OTG role change.
-+ */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ struct work_struct start_work;
-+#else
-+ struct delayed_work start_work;
-+#endif
-+
-+ /**
-+ * Connection timer. An OTG host must display a message if the device
-+ * does not connect. Started when the VBus power is turned on via
-+ * sysfs attribute "buspower".
-+ */
-+ struct timer_list conn_timer;
-+
-+ /* Tasket to do a reset */
-+ struct tasklet_struct *reset_tasklet;
-+
-+ /* */
-+ spinlock_t lock;
-+
-+#ifdef DEBUG
-+ uint32_t frrem_samples;
-+ uint64_t frrem_accum;
-+
-+ uint32_t hfnum_7_samples_a;
-+ uint64_t hfnum_7_frrem_accum_a;
-+ uint32_t hfnum_0_samples_a;
-+ uint64_t hfnum_0_frrem_accum_a;
-+ uint32_t hfnum_other_samples_a;
-+ uint64_t hfnum_other_frrem_accum_a;
-+
-+ uint32_t hfnum_7_samples_b;
-+ uint64_t hfnum_7_frrem_accum_b;
-+ uint32_t hfnum_0_samples_b;
-+ uint64_t hfnum_0_frrem_accum_b;
-+ uint32_t hfnum_other_samples_b;
-+ uint64_t hfnum_other_frrem_accum_b;
-+#endif
-+} dwc_otg_hcd_t;
-+
-+/** Gets the dwc_otg_hcd from a struct usb_hcd */
-+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-+{
-+ return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-+}
-+
-+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-+}
-+
-+/** @name HCD Create/Destroy Functions */
-+/** @{ */
-+extern int dwc_otg_hcd_init(struct device *dev);
-+extern void dwc_otg_hcd_remove(struct device *dev);
-+/** @} */
-+
-+/** @name Linux HC Driver API Functions */
-+/** @{ */
-+
-+extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-+extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-+extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-+ struct urb *urb,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int mem_flags
-+#else
-+ gfp_t mem_flags
-+#endif
-+ );
-+extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+#endif
-+ struct urb *urb, int status);
-+extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep);
-+extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ , struct pt_regs *regs
-+#endif
-+ );
-+extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
-+ char *buf);
-+extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength);
-+
-+/** @} */
-+
-+/** @name Transaction Execution Functions */
-+/** @{ */
-+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd);
-+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd,
-+ dwc_otg_transaction_type_e tr_type);
-+extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb,
-+ int status);
-+/** @} */
-+
-+/** @name Interrupt Handler Functions */
-+/** @{ */
-+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num);
-+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd);
-+/** @} */
-+
-+
-+/** @name Schedule Queue Functions */
-+/** @{ */
-+
-+/* Implemented in dwc_otg_hcd_queue.c */
-+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb);
-+extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb);
-+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit);
-+
-+/** Remove and free a QH */
-+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh)
-+{
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ dwc_otg_hcd_qh_free(hcd, qh);
-+}
-+
-+/** Allocates memory for a QH structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void)
-+{
-+ return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL);
-+}
-+
-+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb);
-+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb);
-+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-+
-+/** Allocates memory for a QTD structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void)
-+{
-+ return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-+}
-+
-+/** Frees the memory for a QTD structure. QTD should already be removed from
-+ * list.
-+ * @param[in] qtd QTD to free.*/
-+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd)
-+{
-+ kfree(qtd);
-+}
-+
-+/** Removes a QTD from list.
-+ * @param[in] hcd HCD instance.
-+ * @param[in] qtd QTD to remove from list. */
-+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-+{
-+ unsigned long flags;
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+ list_del(&qtd->qtd_list_entry);
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-+}
-+
-+/** Remove and free a QTD */
-+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd)
-+{
-+ dwc_otg_hcd_qtd_remove(hcd, qtd);
-+ dwc_otg_hcd_qtd_free(qtd);
-+}
-+
-+/** @} */
-+
-+
-+/** @name Internal Functions */
-+/** @{ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb);
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd);
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd);
-+/** @} */
-+
-+/** Gets the usb_host_endpoint associated with an URB. */
-+static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
-+{
-+ struct usb_device *dev = urb->dev;
-+ int ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (usb_pipein(urb->pipe))
-+ return dev->ep_in[ep_num];
-+ else
-+ return dev->ep_out[ep_num];
-+}
-+
-+/**
-+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
-+ * qualified with its direction (possible 32 endpoints per device).
-+ */
-+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-+
-+/** Gets the QH that contains the list_head */
-+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
-+
-+/** Gets the QTD that contains the list_head */
-+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
-+
-+/** Check if QH is non-periodic */
-+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
-+ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-+
-+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-+
-+/** Packet size for any kind of endpoint descriptor */
-+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-+
-+/**
-+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
-+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
-+ * frame number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
-+{
-+ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
-+ (DWC_HFNUM_MAX_FRNUM >> 1);
-+}
-+
-+/**
-+ * Returns true if _frame1 is greater than _frame2. The comparison is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
-+ * number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
-+{
-+ return (frame1 != frame2) &&
-+ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
-+ (DWC_HFNUM_MAX_FRNUM >> 1));
-+}
-+
-+/**
-+ * Increments _frame by the amount specified by _inc. The addition is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
-+ */
-+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
-+{
-+ return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
-+}
-+
-+static inline uint16_t dwc_full_frame_num(uint16_t frame)
-+{
-+ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
-+}
-+
-+static inline uint16_t dwc_micro_frame_num(uint16_t frame)
-+{
-+ return frame & 0x7;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * Macro to sample the remaining PHY clocks left in the current frame. This
-+ * may be used during debugging to determine the average time it takes to
-+ * execute sections of code. There are two possible sample points, "a" and
-+ * "b", so the _letter argument must be one of these values.
-+ *
-+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
-+ * example, "cat /sys/devices/lm0/hcd_frrem".
-+ */
-+#define dwc_sample_frrem(_hcd, _qh, _letter) \
-+{ \
-+ hfnum_data_t hfnum; \
-+ dwc_otg_qtd_t *qtd; \
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
-+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
-+ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
-+ switch (hfnum.b.frnum & 0x7) { \
-+ case 7: \
-+ _hcd->hfnum_7_samples_##_letter++; \
-+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ case 0: \
-+ _hcd->hfnum_0_samples_##_letter++; \
-+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ default: \
-+ _hcd->hfnum_other_samples_##_letter++; \
-+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ } \
-+ } \
-+}
-+#else
-+#define dwc_sample_frrem(_hcd, _qh, _letter)
-+#endif
-+#endif
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-@@ -0,0 +1,1873 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
-+ * $Revision: 1.6.2.1 $
-+ * $Date: 2009-04-22 03:48:22 $
-+ * $Change: 1117667 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+#include <linux/version.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+/** @file
-+ * This file contains the implementation of the HCD Interrupt handlers.
-+ */
-+
-+/** This function handles interrupts for the HCD. */
-+int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+#endif
-+
-+ /* Check if HOST Mode */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ gintsts.d32 = dwc_otg_read_core_intr(core_if);
-+ if (!gintsts.d32) {
-+ return 0;
-+ }
-+
-+#ifdef DEBUG
-+ /* Don't print debug message in the interrupt handler on SOF */
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "\n");
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-+#endif
-+ if (gintsts.b.usbreset) {
-+ DWC_PRINT("Usb Reset In Host Mode\n");
-+ }
-+
-+
-+ if (gintsts.b.sofintr) {
-+ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.rxstsqlvl) {
-+ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.nptxfempty) {
-+ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.i2cintr) {
-+ /** @todo Implement i2cintr handler. */
-+ }
-+ if (gintsts.b.portintr) {
-+ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.hcintr) {
-+ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.ptxfempty) {
-+ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd);
-+ }
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintmsk));
-+ }
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "\n");
-+#endif
-+
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+#warning Compiling code to track missed SOFs
-+#define FRAME_NUM_ARRAY_SIZE 1000
-+/**
-+ * This function is for debug only.
-+ */
-+static inline void track_missed_sofs(uint16_t curr_frame_number)
-+{
-+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static int frame_num_idx = 0;
-+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
-+ static int dumped_frame_num_array = 0;
-+
-+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
-+ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) {
-+ frame_num_array[frame_num_idx] = curr_frame_number;
-+ last_frame_num_array[frame_num_idx++] = last_frame_num;
-+ }
-+ } else if (!dumped_frame_num_array) {
-+ int i;
-+ printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
-+ printk(KERN_EMERG USB_DWC "----- ----------\n");
-+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
-+ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
-+ frame_num_array[i], last_frame_num_array[i]);
-+ }
-+ dumped_frame_num_array = 1;
-+ }
-+ last_frame_num = curr_frame_number;
-+}
-+#endif
-+
-+/**
-+ * Handles the start-of-frame interrupt in host mode. Non-periodic
-+ * transactions may be queued to the DWC_otg controller for the current
-+ * (micro)frame. Periodic transactions may be queued to the controller for the
-+ * next (micro)frame.
-+ */
-+int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd)
-+{
-+ hfnum_data_t hfnum;
-+ struct list_head *qh_entry;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_transaction_type_e tr_type;
-+ gintsts_data_t gintsts = {.d32 = 0};
-+
-+ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-+#endif
-+ hcd->frame_number = hfnum.b.frnum;
-+
-+#ifdef DEBUG
-+ hcd->frrem_accum += hfnum.b.frrem;
-+ hcd->frrem_samples++;
-+#endif
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+ track_missed_sofs(hcd->frame_number);
-+#endif
-+
-+ /* Determine whether any periodic QHs should be executed. */
-+ qh_entry = hcd->periodic_sched_inactive.next;
-+ while (qh_entry != &hcd->periodic_sched_inactive) {
-+ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
-+ qh_entry = qh_entry->next;
-+ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
-+ /*
-+ * Move QH to the ready list to be executed next
-+ * (micro)frame.
-+ */
-+ list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready);
-+ }
-+ }
-+
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.b.sofintr = 1;
-+ dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
-+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
-+ * memory if the DWC_otg controller is operating in Slave mode. */
-+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ host_grxsts_data_t grxsts;
-+ dwc_hc_t *hc = NULL;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-+
-+ grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-+
-+ /* Packet Status */
-+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
-+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer. */
-+ if (grxsts.b.bcnt > 0) {
-+ dwc_otg_read_packet(dwc_otg_hcd->core_if,
-+ hc->xfer_buff,
-+ grxsts.b.bcnt);
-+
-+ /* Update the HC fields for the next packet received. */
-+ hc->xfer_count += grxsts.b.bcnt;
-+ hc->xfer_buff += grxsts.b.bcnt;
-+ }
-+
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
-+ case DWC_GRXSTS_PKTSTS_CH_HALTED:
-+ /* Handled in interrupt, just ignore data */
-+ break;
-+ default:
-+ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
-+ break;
-+ }
-+
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
-+ * data packets may be written to the FIFO for OUT transfers. More requests
-+ * may be written to the non-periodic request queue for IN transfers. This
-+ * interrupt is enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC);
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
-+ * packets may be written to the FIFO for OUT transfers. More requests may be
-+ * written to the periodic request queue for IN transfers. This interrupt is
-+ * enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_PERIODIC);
-+ return 1;
-+}
-+
-+/** There are multiple conditions that can cause a port interrupt. This function
-+ * determines which interrupt conditions have occurred and handles them
-+ * appropriately. */
-+int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int retval = 0;
-+ hprt0_data_t hprt0;
-+ hprt0_data_t hprt0_modify;
-+
-+ hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-+ hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0);
-+
-+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ hprt0_modify.b.prtena = 0;
-+ hprt0_modify.b.prtconndet = 0;
-+ hprt0_modify.b.prtenchng = 0;
-+ hprt0_modify.b.prtovrcurrchng = 0;
-+
-+ /* Port Connect Detected
-+ * Set flag and clear if detected */
-+ if (hprt0.b.prtconndet) {
-+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-+ "Port Connect Detected--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 1;
-+ hprt0_modify.b.prtconndet = 1;
-+
-+ /* B-Device has connected, Delete the connection timer. */
-+ del_timer( &dwc_otg_hcd->conn_timer );
-+
-+ /* The Hub driver asserts a reset when it sees port connect
-+ * status change flag */
-+ retval |= 1;
-+ }
-+
-+ /* Port Enable Changed
-+ * Clear if detected - Set internal flag if disabled */
-+ if (hprt0.b.prtenchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Enable Changed--\n", hprt0.d32);
-+ hprt0_modify.b.prtenchng = 1;
-+ if (hprt0.b.prtena == 1) {
-+ int do_reset = 0;
-+ dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params;
-+ dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if;
-+
-+ /* Check if we need to adjust the PHY clock speed for
-+ * low power and adjust it */
-+ if (params->host_support_fs_ls_low_power) {
-+ gusbcfg_data_t usbcfg;
-+
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ||
-+ hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
-+ /*
-+ * Low power
-+ */
-+ hcfg_data_t hcfg;
-+ if (usbcfg.b.phylpwrclksel == 0) {
-+ /* Set PHY low power clock select for FS/LS devices */
-+ usbcfg.b.phylpwrclksel = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED &&
-+ params->host_ls_low_power_phy_clk ==
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
-+ /* 6 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ } else {
-+ /* 48 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+ } else {
-+ /*
-+ * Not low power
-+ */
-+ if (usbcfg.b.phylpwrclksel == 1) {
-+ usbcfg.b.phylpwrclksel = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+
-+ if (do_reset) {
-+ tasklet_schedule(dwc_otg_hcd->reset_tasklet);
-+ }
-+ }
-+
-+ if (!do_reset) {
-+ /* Port has been enabled set the reset change flag */
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+ }
-+ } else {
-+ dwc_otg_hcd->flags.b.port_enable_change = 1;
-+ }
-+ retval |= 1;
-+ }
-+
-+ /** Overcurrent Change Interrupt */
-+ if (hprt0.b.prtovrcurrchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Overcurrent Changed--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_over_current_change = 1;
-+ hprt0_modify.b.prtovrcurrchng = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Clear Port Interrupts */
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-+
-+ return retval;
-+}
-+
-+/** This interrupt indicates that one or more host channels has a pending
-+ * interrupt. There are multiple conditions that can cause each host channel
-+ * interrupt. This function determines which conditions have occurred for each
-+ * host channel interrupt and handles them appropriately. */
-+int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ int i;
-+ int retval = 0;
-+ haint_data_t haint;
-+
-+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
-+
-+ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
-+ if (haint.b2.chint & (1 << i)) {
-+ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/* Macro used to clear one channel interrupt */
-+#define clear_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcint_data_t hcint_clear = {.d32 = 0}; \
-+ hcint_clear.b._intr_ = 1; \
-+ dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \
-+} while (0)
-+
-+/*
-+ * Macro used to disable one channel interrupt. Channel interrupts are
-+ * disabled when the channel is halted or released by the interrupt handler.
-+ * There is no need to handle further interrupts of that type until the
-+ * channel is re-assigned. In fact, subsequent handling may cause crashes
-+ * because the channel structures are cleaned up when the channel is released.
-+ */
-+#define disable_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
-+} while (0)
-+
-+/**
-+ * Gets the actual length of a transfer after the transfer halts. _halt_status
-+ * holds the reason for the halt.
-+ *
-+ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
-+ * *short_read is set to 1 upon return if less than the requested
-+ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
-+ * return. short_read may also be NULL on entry, in which case it remains
-+ * unchanged.
-+ */
-+static uint32_t get_actual_xfer_length(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status,
-+ int *short_read)
-+{
-+ hctsiz_data_t hctsiz;
-+ uint32_t length;
-+
-+ if (short_read != NULL) {
-+ *short_read = 0;
-+ }
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ if (hc->ep_is_in) {
-+ length = hc->xfer_len - hctsiz.b.xfersize;
-+ if (short_read != NULL) {
-+ *short_read = (hctsiz.b.xfersize != 0);
-+ }
-+ } else if (hc->qh->do_split) {
-+ length = qtd->ssplit_out_xfer_count;
-+ } else {
-+ length = hc->xfer_len;
-+ }
-+ } else {
-+ /*
-+ * Must use the hctsiz.pktcnt field to determine how much data
-+ * has been transferred. This field reflects the number of
-+ * packets that have been transferred via the USB. This is
-+ * always an integral number of packets if the transfer was
-+ * halted before its normal completion. (Can't use the
-+ * hctsiz.xfersize field because that reflects the number of
-+ * bytes transferred via the AHB, not the USB).
-+ */
-+ length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
-+ }
-+
-+ return length;
-+}
-+
-+/**
-+ * Updates the state of the URB after a Transfer Complete interrupt on the
-+ * host channel. Updates the actual_length field of the URB based on the
-+ * number of bytes transferred via the host channel. Sets the URB status
-+ * if the data transfer is finished.
-+ *
-+ * @return 1 if the data transfer specified by the URB is completely finished,
-+ * 0 otherwise.
-+ */
-+static int update_urb_state_xfer_comp(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ struct urb *urb,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ int xfer_done = 0;
-+ int short_read = 0;
-+ int overflow_read=0;
-+ uint32_t len = 0;
-+ int max_packet;
-+
-+ len = get_actual_xfer_length(hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ &short_read);
-+
-+ /* Data overflow case: by Steven */
-+ if (len > urb->transfer_buffer_length) {
-+ len = urb->transfer_buffer_length;
-+ overflow_read = 1;
-+ }
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) {
-+ memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len);
-+ }
-+ urb->actual_length +=len;
-+
-+ max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe));
-+ if((len) && usb_pipebulk(urb->pipe) &&
-+ (urb->transfer_flags & URB_ZERO_PACKET) &&
-+ (urb->actual_length == urb->transfer_buffer_length) &&
-+ (!(urb->transfer_buffer_length % max_packet))) {
-+ } else if (short_read || urb->actual_length == urb->transfer_buffer_length) {
-+ xfer_done = 1;
-+ if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) {
-+ urb->status = -EREMOTEIO;
-+ } else if (overflow_read) {
-+ urb->status = -EOVERFLOW;
-+ } else {
-+ urb->status = 0;
-+ }
-+ }
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->transfer_buffer_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
-+ short_read, xfer_done);
-+ }
-+#endif
-+
-+ return xfer_done;
-+}
-+
-+/*
-+ * Save the starting data toggle for the next transfer. The data toggle is
-+ * saved in the QH for non-control transfers and it's saved in the QTD for
-+ * control transfers.
-+ */
-+static void save_data_toggle(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
-+ dwc_otg_qh_t *qh = hc->qh;
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ } else {
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ }
-+}
-+
-+/**
-+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
-+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
-+ * still linked to the QH, the QH is added to the end of the inactive
-+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
-+ * schedule if no more QTDs are linked to the QH.
-+ */
-+static void deactivate_qh(dwc_otg_hcd_t *hcd,
-+ dwc_otg_qh_t *qh,
-+ int free_qtd)
-+{
-+ int continue_split = 0;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
-+
-+ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ if (qtd->complete_split) {
-+ continue_split = 1;
-+ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
-+ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
-+ continue_split = 1;
-+ }
-+
-+ if (free_qtd) {
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd);
-+ continue_split = 0;
-+ }
-+
-+ qh->channel = NULL;
-+ qh->qtd_in_process = NULL;
-+ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
-+}
-+
-+/**
-+ * Updates the state of an Isochronous URB when the transfer is stopped for
-+ * any reason. The fields of the current entry in the frame descriptor array
-+ * are set based on the transfer state and the input _halt_status. Completes
-+ * the Isochronous URB if all the URB frames have been completed.
-+ *
-+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
-+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
-+ */
-+static dwc_otg_halt_status_e
-+update_isoc_urb_state(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ struct urb *urb = qtd->urb;
-+ dwc_otg_halt_status_e ret_val = halt_status;
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_COMPLETE:
-+ frame_desc->status = 0;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
-+ hc->qh->dw_align_buf && hc->ep_is_in) {
-+ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
-+ hc->qh->dw_align_buf, frame_desc->actual_length);
-+
-+ }
-+
-+ break;
-+ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
-+ printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status);
-+ urb->error_count++;
-+ if (hc->ep_is_in) {
-+ frame_desc->status = -ENOSR;
-+ } else {
-+ frame_desc->status = -ECOMM;
-+ }
-+ frame_desc->actual_length = 0;
-+ break;
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status);
-+ urb->error_count++;
-+ frame_desc->status = -EOVERFLOW;
-+ /* Don't need to update actual_length in this case. */
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status);
-+ urb->error_count++;
-+ frame_desc->status = -EPROTO;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) &&
-+ hc->qh->dw_align_buf && hc->ep_is_in) {
-+ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset,
-+ hc->qh->dw_align_buf, frame_desc->actual_length);
-+
-+ }
-+ break;
-+ default:
-+
-+ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
-+ halt_status);
-+ BUG();
-+ break;
-+ }
-+
-+ if (++qtd->isoc_frame_index == urb->number_of_packets) {
-+ /*
-+ * urb->status is not used for isoc transfers.
-+ * The individual frame_desc statuses are used instead.
-+ */
-+ dwc_otg_hcd_complete_urb(hcd, urb, 0);
-+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ ret_val = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Releases a host channel for use by other transfers. Attempts to select and
-+ * queue more transactions since at least one host channel is available.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc The host channel to release.
-+ * @param qtd The QTD associated with the host channel. This QTD may be freed
-+ * if the transfer is complete or an error has occurred.
-+ * @param halt_status Reason the channel is being released. This status
-+ * determines the actions taken by this function.
-+ */
-+static void release_channel(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ dwc_otg_transaction_type_e tr_type;
-+ int free_qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
-+ __func__, hc->hc_num, halt_status);
-+
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_URB_COMPLETE:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_AHB_ERR:
-+ case DWC_OTG_HC_XFER_STALL:
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ if (qtd->error_count >= 3) {
-+ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
-+ free_qtd = 1;
-+ qtd->urb->status = -EPROTO;
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO);
-+ } else {
-+ free_qtd = 0;
-+ }
-+ break;
-+ case DWC_OTG_HC_XFER_URB_DEQUEUE:
-+ /*
-+ * The QTD has already been removed and the QH has been
-+ * deactivated. Don't want to do anything except release the
-+ * host channel and try to queue more transfers.
-+ */
-+ goto cleanup;
-+ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
-+ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num);
-+ free_qtd = 0;
-+ break;
-+ default:
-+ free_qtd = 0;
-+ break;
-+ }
-+
-+ deactivate_qh(hcd, hc->qh, free_qtd);
-+
-+ cleanup:
-+ /*
-+ * Release the host channel for use by other transfers. The cleanup
-+ * function clears the channel interrupt enables and conditions, so
-+ * there's no need to clear the Channel Halted interrupt separately.
-+ */
-+ dwc_otg_hc_cleanup(hcd->core_if, hc);
-+ list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list);
-+
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hcd->non_periodic_channels--;
-+ break;
-+
-+ default:
-+ /*
-+ * Don't release reservations for periodic channels here.
-+ * That's done when a periodic transfer is descheduled (i.e.
-+ * when the QH is removed from the periodic schedule).
-+ */
-+ break;
-+ }
-+
-+ /* Try to queue more transfers now that there's a free channel. */
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+}
-+
-+/**
-+ * Halts a host channel. If the channel cannot be halted immediately because
-+ * the request queue is full, this function ensures that the FIFO empty
-+ * interrupt for the appropriate queue is enabled so that the halt request can
-+ * be queued when there is space in the request queue.
-+ *
-+ * This function may also be called in DMA mode. In that case, the channel is
-+ * simply released since the core always halts the channel automatically in
-+ * DMA mode.
-+ */
-+static void halt_channel(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ if (hcd->core_if->dma_enable) {
-+ release_channel(hcd, hc, qtd, halt_status);
-+ return;
-+ }
-+
-+ /* Slave mode processing... */
-+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
-+
-+ if (hc->halt_on_queue) {
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ dwc_otg_core_global_regs_t *global_regs;
-+ global_regs = hcd->core_if->core_global_regs;
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ /*
-+ * Make sure the Non-periodic Tx FIFO empty interrupt
-+ * is enabled so that the non-periodic schedule will
-+ * be processed.
-+ */
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ } else {
-+ /*
-+ * Move the QH from the periodic queued schedule to
-+ * the periodic assigned schedule. This allows the
-+ * halt to be queued when the periodic schedule is
-+ * processed.
-+ */
-+ list_move(&hc->qh->qh_list_entry,
-+ &hcd->periodic_sched_assigned);
-+
-+ /*
-+ * Make sure the Periodic Tx FIFO Empty interrupt is
-+ * enabled so that the periodic schedule will be
-+ * processed.
-+ */
-+ gintmsk.b.ptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for non-periodic transfers after a Transfer
-+ * Complete interrupt. This function should be called after any endpoint type
-+ * specific handling is finished to release the host channel.
-+ */
-+static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hcint_data_t hcint;
-+
-+ qtd->error_count = 0;
-+
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ if (hcint.b.nyet) {
-+ /*
-+ * Got a NYET on the last transaction of the transfer. This
-+ * means that the endpoint should be in the PING state at the
-+ * beginning of the next transfer.
-+ */
-+ hc->qh->ping_state = 1;
-+ clear_hc_int(hc_regs, nyet);
-+ }
-+
-+ /*
-+ * Always halt and release the host channel to make it available for
-+ * more transfers. There may still be more phases for a control
-+ * transfer or more data packets for a bulk transfer at this point,
-+ * but the host channel is still halted. A channel will be reassigned
-+ * to the transfer when the non-periodic schedule is processed after
-+ * the channel is released. This allows transactions to be queued
-+ * properly via dwc_otg_hcd_queue_transactions, which also enables the
-+ * Tx FIFO Empty interrupt if necessary.
-+ */
-+ if (hc->ep_is_in) {
-+ /*
-+ * IN transfers in Slave mode require an explicit disable to
-+ * halt the channel. (In DMA mode, this call simply releases
-+ * the channel.)
-+ */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /*
-+ * The channel is automatically disabled by the core for OUT
-+ * transfers in Slave mode.
-+ */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for periodic transfers after a Transfer Complete
-+ * interrupt. This function should be called after any endpoint type specific
-+ * handling is finished to release the host channel.
-+ */
-+static void complete_periodic_xfer(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hctsiz_data_t hctsiz;
-+ qtd->error_count = 0;
-+
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
-+ /* Core halts channel in these cases. */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /* Flush any outstanding requests from the Tx queue. */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Transfer Complete interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ int urb_xfer_done;
-+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ struct urb *urb = qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transfer Complete--\n", hc->hc_num);
-+
-+ /*
-+ * Handle xfer complete on CSPLIT.
-+ */
-+ if (hc->qh->do_split) {
-+ qtd->complete_split = 0;
-+ }
-+
-+ /* Update the QTD and URB states. */
-+ switch (pipe_type) {
-+ case PIPE_CONTROL:
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ if (urb->transfer_buffer_length > 0) {
-+ qtd->control_phase = DWC_OTG_CONTROL_DATA;
-+ } else {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ case DWC_OTG_CONTROL_DATA: {
-+ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+ if (urb_xfer_done) {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
-+ } else {
-+ save_data_toggle(hc, hc_regs, qtd);
-+ }
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ }
-+ case DWC_OTG_CONTROL_STATUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
-+ if (urb->status == -EINPROGRESS) {
-+ urb->status = 0;
-+ }
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ break;
-+ }
-+
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case PIPE_BULK:
-+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
-+ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+ if (urb_xfer_done) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ save_data_toggle(hc, hc_regs, qtd);
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case PIPE_INTERRUPT:
-+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
-+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+
-+ /*
-+ * Interrupt URB is done on the first transfer complete
-+ * interrupt.
-+ */
-+ dwc_otg_hcd_complete_urb(hcd, urb, urb->status);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_URB_COMPLETE);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
-+ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, xfercompl);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel STALL interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ struct urb *urb = qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "STALL Received--\n", hc->hc_num);
-+
-+ if (pipe_type == PIPE_CONTROL) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-+ }
-+
-+ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE);
-+ /*
-+ * USB protocol requires resetting the data toggle for bulk
-+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
-+ * setup command is issued to the endpoint. Anticipate the
-+ * CLEAR_FEATURE command since a STALL has occurred and reset
-+ * the data toggle now.
-+ */
-+ hc->qh->data_toggle = 0;
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
-+
-+ disable_hc_int(hc_regs, stall);
-+
-+ return 1;
-+}
-+
-+/*
-+ * Updates the state of the URB when a transfer has been stopped due to an
-+ * abnormal condition before the transfer completes. Modifies the
-+ * actual_length field of the URB to reflect the number of bytes that have
-+ * actually been transferred via the host channel.
-+ */
-+static void update_urb_state_xfer_intr(dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ struct urb *urb,
-+ dwc_otg_qtd_t *qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+ urb->actual_length += bytes_transferred;
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet);
-+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->transfer_buffer_length);
-+ }
-+#endif
-+}
-+
-+/**
-+ * Handles a host channel NAK interrupt. This handler may be called in either
-+ * DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NAK Received--\n", hc->hc_num);
-+
-+ /*
-+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
-+ * interrupt. Re-start the SSPLIT transfer.
-+ */
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ qtd->error_count = 0;
-+ }
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ goto handle_nak_done;
-+ }
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ if (hcd->core_if->dma_enable && hc->ep_is_in) {
-+ /*
-+ * NAK interrupts are enabled on bulk/control IN
-+ * transfers in DMA mode for the sole purpose of
-+ * resetting the error count after a transaction error
-+ * occurs. The core will continue transferring data.
-+ */
-+ qtd->error_count = 0;
-+ goto handle_nak_done;
-+ }
-+
-+ /*
-+ * NAK interrupts normally occur during OUT transfers in DMA
-+ * or Slave mode. For IN transfers, more requests will be
-+ * queued as request queue space is available.
-+ */
-+ qtd->error_count = 0;
-+
-+ if (!hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-+ qtd, DWC_OTG_HC_XFER_NAK);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will
-+ * start/continue.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case PIPE_INTERRUPT:
-+ qtd->error_count = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ /* Should never get called for isochronous transfers. */
-+ BUG();
-+ break;
-+ }
-+
-+ handle_nak_done:
-+ disable_hc_int(hc_regs, nak);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * performing the PING protocol in Slave mode, when errors occur during
-+ * either Slave mode or DMA mode, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "ACK Received--\n", hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /*
-+ * Handle ACK on SSPLIT.
-+ * ACK should not occur in CSPLIT.
-+ */
-+ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
-+ qtd->ssplit_out_xfer_count = hc->xfer_len;
-+ }
-+ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
-+ /* Don't need complete for isochronous out transfers. */
-+ qtd->complete_split = 1;
-+ }
-+
-+ /* ISOC OUT */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ switch (hc->xact_pos) {
-+ case DWC_HCSPLIT_XACTPOS_ALL:
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_END:
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_BEGIN:
-+ case DWC_HCSPLIT_XACTPOS_MID:
-+ /*
-+ * For BEGIN or MID, calculate the length for
-+ * the next microframe to determine the correct
-+ * SSPLIT token, either MID or END.
-+ */
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index];
-+ qtd->isoc_split_offset += 188;
-+
-+ if ((frame_desc->length - qtd->isoc_split_offset) <= 188) {
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
-+ } else {
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
-+ }
-+
-+ }
-+ break;
-+ }
-+ } else {
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ } else {
-+ qtd->error_count = 0;
-+
-+ if (hc->qh->ping_state) {
-+ hc->qh->ping_state = 0;
-+ /*
-+ * Halt the channel so the transfer can be re-started
-+ * from the appropriate point. This only happens in
-+ * Slave mode. In DMA mode, the ping_state is cleared
-+ * when the transfer is started because the core
-+ * automatically executes the PING, then the transfer.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ }
-+
-+ /*
-+ * If the ACK occurred when _not_ in the PING state, let the channel
-+ * continue transferring data after clearing the error count.
-+ */
-+
-+ disable_hc_int(hc_regs, ack);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel NYET interrupt. This interrupt should only occur on
-+ * Bulk and Control OUT endpoints and for complete split transactions. If a
-+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
-+ * handled in the xfercomp interrupt handler, not here. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NYET Received--\n", hc->hc_num);
-+
-+ /*
-+ * NYET on CSPLIT
-+ * re-do the CSPLIT immediately on non-periodic
-+ */
-+ if (hc->do_split && hc->complete_split) {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-+
-+ if (dwc_full_frame_num(frnum) !=
-+ dwc_full_frame_num(hc->qh->sched_frame)) {
-+ /*
-+ * No longer in the same full speed frame.
-+ * Treat this as a transaction error.
-+ */
-+#if 0
-+ /** @todo Fix system performance so this can
-+ * be treated as an error. Right now complete
-+ * splits cannot be scheduled precisely enough
-+ * due to other system activity, so this error
-+ * occurs regularly in Slave mode.
-+ */
-+ qtd->error_count++;
-+#endif
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ /** @todo add support for isoc release */
-+ goto handle_nyet_done;
-+ }
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+ goto handle_nyet_done;
-+ }
-+
-+ hc->qh->ping_state = 1;
-+ qtd->error_count = 0;
-+
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
-+ DWC_OTG_HC_XFER_NYET);
-+ save_data_toggle(hc, hc_regs, qtd);
-+
-+ /*
-+ * Halt the channel and re-start the transfer so the PING
-+ * protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+
-+handle_nyet_done:
-+ disable_hc_int(hc_regs, nyet);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel babble interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Babble Error--\n", hc->hc_num);
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
-+ } else {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_BABBLE_ERR);
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ disable_hc_int(hc_regs, bblerr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+ struct urb *urb = qtd->urb;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "AHB Error--\n", hc->hc_num);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&hc_regs->hcdma);
-+
-+ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
-+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
-+ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_ERROR(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_ERROR(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_ERROR(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_ERROR(" Interval: %d\n", urb->interval);
-+
-+ dwc_otg_hcd_complete_urb(hcd, urb, -EIO);
-+
-+ /*
-+ * Force a channel halt. Don't call halt_channel because that won't
-+ * write to the HCCHARn register in DMA mode to force the halt.
-+ */
-+ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
-+
-+ disable_hc_int(hc_regs, ahberr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel transaction error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transaction Error--\n", hc->hc_num);
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ qtd->error_count++;
-+ if (!hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb,
-+ qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ save_data_toggle(hc, hc_regs, qtd);
-+ if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case PIPE_INTERRUPT:
-+ qtd->error_count++;
-+ if (hc->do_split && hc->complete_split) {
-+ qtd->complete_split = 0;
-+ }
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, xacterr);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel frame overrun interrupt. This handler may be called
-+ * in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Frame Overrun--\n", hc->hc_num);
-+
-+ switch (usb_pipetype(qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ break;
-+ case PIPE_INTERRUPT:
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, frmovrun);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel data toggle error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Data Toggle Error--\n", hc->hc_num);
-+
-+ if (hc->ep_is_in) {
-+ qtd->error_count = 0;
-+ } else {
-+ DWC_ERROR("Data Toggle Error on OUT transfer,"
-+ "channel %d\n", hc->hc_num);
-+ }
-+
-+ disable_hc_int(hc_regs, datatglerr);
-+
-+ return 1;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * This function is for debug only. It checks that a valid halt status is set
-+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
-+ * taken and a warning is issued.
-+ * @return 1 if halt status is ok, 0 otherwise.
-+ */
-+static inline int halt_status_ok(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hcsplt_data_t hcsplt;
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
-+ /*
-+ * This code is here only as a check. This condition should
-+ * never happen. Ignore the halt if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ DWC_WARN("%s: hc->halt_status == DWC_OTG"
-+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
-+ "hcint 0x%08x, hcintmsk 0x%08x, "
-+ "hcsplt 0x%08x, qtd->complete_split %d\n",
-+ __func__, hc->hc_num, hcchar.d32, hctsiz.d32,
-+ hcint.d32, hcintmsk.d32,
-+ hcsplt.d32, qtd->complete_split);
-+
-+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
-+ __func__, hc->hc_num);
-+ DWC_WARN("\n");
-+ clear_hc_int(hc_regs, chhltd);
-+ return 0;
-+ }
-+
-+ /*
-+ * This code is here only as a check. hcchar.chdis should
-+ * never be set when the halt interrupt occurs. Halt the
-+ * channel again if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
-+ "hcchar 0x%08x, trying to halt again\n",
-+ __func__, hcchar.d32);
-+ clear_hc_int(hc_regs, chhltd);
-+ hc->halt_pending = 0;
-+ halt_channel(hcd, hc, qtd, hc->halt_status);
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+#endif
-+
-+/**
-+ * Handles a host Channel Halted interrupt in DMA mode. This handler
-+ * determines the reason the channel halted and proceeds accordingly.
-+ */
-+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ int out_nak_enh = 0;
-+
-+ /* For core with OUT NAK enhancement, the flow for high-
-+ * speed CONTROL/BULK OUT is handled a little differently.
-+ */
-+ if (hcd->core_if->snpsid >= 0x4F54271A) {
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
-+ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
-+ printk(KERN_DEBUG "OUT NAK enhancement enabled\n");
-+ out_nak_enh = 1;
-+ } else {
-+ printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n");
-+ }
-+ } else {
-+// printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n");
-+ }
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Just release the channel. A dequeue can happen on a
-+ * transfer timeout. In the case of an AHB Error, the channel
-+ * was forced to halt because there's no way to gracefully
-+ * recover.
-+ */
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ return;
-+ }
-+
-+ /* Read the HCINTn register to determine the cause for the halt. */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+
-+ if (hcint.b.xfercomp) {
-+ /** @todo This is here because of a possible hardware bug. Spec
-+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
-+ * interrupt w/ACK bit set should occur, but I only see the
-+ * XFERCOMP bit, even with it masked out. This is a workaround
-+ * for that behavior. Should fix this when hardware is fixed.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ }
-+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.stall) {
-+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.xacterr) {
-+ if (out_nak_enh) {
-+ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
-+ printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n");
-+ qtd->error_count = 0;
-+ } else {
-+ printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n");
-+ }
-+ }
-+
-+ /*
-+ * Must handle xacterr before nak or ack. Could get a xacterr
-+ * at the same time as either of these on a BULK/CONTROL OUT
-+ * that started with a PING. The xacterr takes precedence.
-+ */
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (!out_nak_enh) {
-+ if (hcint.b.nyet) {
-+ /*
-+ * Must handle nyet before nak or ack. Could get a nyet at the
-+ * same time as either of those on a BULK/CONTROL OUT that
-+ * started with a PING. The nyet takes precedence.
-+ */
-+ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.frmovrun) {
-+ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.nak && !hcintmsk.b.nak) {
-+ /*
-+ * If nak is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the nak is handled by
-+ * the nak interrupt handler, not here. Handle nak here for
-+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
-+ * rewinding the buffer pointer.
-+ */
-+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ack && !hcintmsk.b.ack) {
-+ /*
-+ * If ack is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the ack is handled by
-+ * the ack interrupt handler, not here. Handle ack here for
-+ * split transfers. Start splits halt on ACK.
-+ */
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * A periodic transfer halted with no other channel
-+ * interrupts set. Assume it was halted by the core
-+ * because it could not be completed in its scheduled
-+ * (micro)frame.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
-+ __func__, hc->hc_num);
-+#endif
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
-+ } else {
-+ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
-+ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
-+ __func__, hc->hc_num, hcint.d32,
-+ dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts));
-+ }
-+ }
-+ } else {
-+ printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Channel Halted interrupt.
-+ *
-+ * In slave mode, this handler is called only when the driver specifically
-+ * requests a halt. This occurs during handling other host channel interrupts
-+ * (e.g. nak, xacterr, stall, nyet, etc.).
-+ *
-+ * In DMA mode, this is the interrupt that occurs when the core has finished
-+ * processing a transfer on a channel. Other host channel interrupts (except
-+ * ahberr) are disabled in DMA mode.
-+ */
-+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd,
-+ dwc_hc_t *hc,
-+ dwc_otg_hc_regs_t *hc_regs,
-+ dwc_otg_qtd_t *qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Channel Halted--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_enable) {
-+ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
-+ } else {
-+#ifdef DEBUG
-+ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
-+ return 1;
-+ }
-+#endif
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ }
-+
-+ return 1;
-+}
-+
-+/** Handles interrupt for a specific Host Channel */
-+int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num)
-+{
-+ int retval = 0;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ dwc_hc_t *hc;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[num];
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
-+ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-+ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
-+ hcint.d32 = hcint.d32 & hcintmsk.d32;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ if (hcint.b.chhltd && hcint.d32 != 0x2) {
-+ hcint.b.chhltd = 0;
-+ }
-+ }
-+
-+ if (hcint.b.xfercomp) {
-+ retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ /*
-+ * If NYET occurred at same time as Xfer Complete, the NYET is
-+ * handled by the Xfer Complete interrupt handler. Don't want
-+ * to call the NYET interrupt handler in this case.
-+ */
-+ hcint.b.nyet = 0;
-+ }
-+ if (hcint.b.chhltd) {
-+ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ahberr) {
-+ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.stall) {
-+ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nak) {
-+ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ack) {
-+ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nyet) {
-+ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.xacterr) {
-+ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.bblerr) {
-+ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.frmovrun) {
-+ retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.datatglerr) {
-+ retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
-@@ -0,0 +1,684 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
-+ * $Revision: 1.5 $
-+ * $Date: 2008-12-15 06:51:32 $
-+ * $Change: 537387 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the functions to manage Queue Heads and Queue
-+ * Transfer Descriptors.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+/**
-+ * This function allocates and initializes a QH.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH.
-+ *
-+ * @return Returns pointer to the newly allocated QH, or NULL on error. */
-+dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb)
-+{
-+ dwc_otg_qh_t *qh;
-+
-+ /* Allocate memory */
-+ /** @todo add memflags argument */
-+ qh = dwc_otg_hcd_qh_alloc ();
-+ if (qh == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qh_init (hcd, qh, urb);
-+ return qh;
-+}
-+
-+/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
-+ * removed from a list. QTD list should already be empty if called from URB
-+ * Dequeue.
-+ *
-+ * @param[in] hcd HCD instance.
-+ * @param[in] qh The QH to free.
-+ */
-+void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ dwc_otg_qtd_t *qtd;
-+ struct list_head *pos;
-+ unsigned long flags;
-+
-+ /* Free each QTD in the QTD list */
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-+ for (pos = qh->qtd_list.next;
-+ pos != &qh->qtd_list;
-+ pos = qh->qtd_list.next)
-+ {
-+ list_del (pos);
-+ qtd = dwc_list_to_qtd (pos);
-+ dwc_otg_hcd_qtd_free (qtd);
-+ }
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-+
-+ if (qh->dw_align_buf) {
-+ dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller,
-+ hcd->core_if->core_params->max_transfer_size,
-+ qh->dw_align_buf,
-+ qh->dw_align_buf_dma);
-+ }
-+
-+ kfree (qh);
-+ return;
-+}
-+
-+/** Initializes a QH structure.
-+ *
-+ * @param[in] hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] qh The QH to init.
-+ * @param[in] urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH. */
-+#define SCHEDULE_SLOP 10
-+void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
-+{
-+ char *speed, *type;
-+ memset (qh, 0, sizeof (dwc_otg_qh_t));
-+
-+ /* Initialize QH */
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
-+ break;
-+ case PIPE_BULK:
-+ qh->ep_type = USB_ENDPOINT_XFER_BULK;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ qh->ep_type = USB_ENDPOINT_XFER_ISOC;
-+ break;
-+ case PIPE_INTERRUPT:
-+ qh->ep_type = USB_ENDPOINT_XFER_INT;
-+ break;
-+ }
-+
-+ qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
-+
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
-+ INIT_LIST_HEAD(&qh->qtd_list);
-+ INIT_LIST_HEAD(&qh->qh_list_entry);
-+ qh->channel = NULL;
-+
-+ /* FS/LS Enpoint on HS Hub
-+ * NOT virtual root hub */
-+ qh->do_split = 0;
-+ if (((urb->dev->speed == USB_SPEED_LOW) ||
-+ (urb->dev->speed == USB_SPEED_FULL)) &&
-+ (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
-+ {
-+ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-+ usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
-+ urb->dev->ttport);
-+ qh->do_split = 1;
-+ }
-+
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
-+ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
-+ /* Compute scheduling parameters once and save them. */
-+ hprt0_data_t hprt;
-+
-+ /** @todo Account for split transfers in the bus time. */
-+ int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
-+
-+ /* FIXME: work-around patch by Steven */
-+ qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
-+ usb_pipein(urb->pipe),
-+ (qh->ep_type == USB_ENDPOINT_XFER_ISOC),
-+ bytecount));
-+
-+ /* Start in a slightly future (micro)frame. */
-+ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
-+ SCHEDULE_SLOP);
-+ qh->interval = urb->interval;
-+#if 0
-+ /* Increase interrupt polling rate for debugging. */
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ qh->interval = 8;
-+ }
-+#endif
-+ hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
-+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
-+ ((urb->dev->speed == USB_SPEED_LOW) ||
-+ (urb->dev->speed == USB_SPEED_FULL))) {
-+ qh->interval *= 8;
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
-+ urb->dev->devnum);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
-+ usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-+
-+ switch(urb->dev->speed) {
-+ case USB_SPEED_LOW:
-+ speed = "low";
-+ break;
-+ case USB_SPEED_FULL:
-+ speed = "full";
-+ break;
-+ case USB_SPEED_HIGH:
-+ speed = "high";
-+ break;
-+ default:
-+ speed = "?";
-+ break;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
-+
-+ switch (qh->ep_type) {
-+ case USB_ENDPOINT_XFER_ISOC:
-+ type = "isochronous";
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ type = "interrupt";
-+ break;
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ type = "control";
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ type = "bulk";
-+ break;
-+ default:
-+ type = "?";
-+ break;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type);
-+
-+#ifdef DEBUG
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
-+ qh->usecs);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
-+ qh->interval);
-+ }
-+#endif
-+ qh->dw_align_buf = NULL;
-+ return;
-+}
-+
-+/**
-+ * Checks that a channel is available for a periodic transfer.
-+ *
-+ * @return 0 if successful, negative error code otherise.
-+ */
-+static int periodic_channel_available(dwc_otg_hcd_t *hcd)
-+{
-+ /*
-+ * Currently assuming that there is a dedicated host channnel for each
-+ * periodic transaction plus at least one host channel for
-+ * non-periodic transactions.
-+ */
-+ int status;
-+ int num_channels;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) &&
-+ (hcd->periodic_channels < num_channels - 1)) {
-+ status = 0;
-+ }
-+ else {
-+ DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
-+ __func__, num_channels, hcd->periodic_channels,
-+ hcd->non_periodic_channels);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Checks that there is sufficient bandwidth for the specified QH in the
-+ * periodic schedule. For simplicity, this calculation assumes that all the
-+ * transfers in the periodic schedule may occur in the same (micro)frame.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH containing periodic bandwidth required.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status;
-+ uint16_t max_claimed_usecs;
-+
-+ status = 0;
-+
-+ if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) {
-+ /*
-+ * High speed mode.
-+ * Max periodic usecs is 80% x 125 usec = 100 usec.
-+ */
-+ max_claimed_usecs = 100 - qh->usecs;
-+ } else {
-+ /*
-+ * Full speed mode.
-+ * Max periodic usecs is 90% x 1000 usec = 900 usec.
-+ */
-+ max_claimed_usecs = 900 - qh->usecs;
-+ }
-+
-+ if (hcd->periodic_usecs > max_claimed_usecs) {
-+ DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n",
-+ __func__, hcd->periodic_usecs, qh->usecs);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Checks that the max transfer size allowed in a host channel is large enough
-+ * to handle the maximum data transfer in a single (micro)frame for a periodic
-+ * transfer.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for a periodic endpoint.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status;
-+ uint32_t max_xfer_size;
-+ uint32_t max_channel_xfer_size;
-+
-+ status = 0;
-+
-+ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
-+ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
-+
-+ if (max_xfer_size > max_channel_xfer_size) {
-+ DWC_NOTICE("%s: Periodic xfer length %d > "
-+ "max xfer length for channel %d\n",
-+ __func__, max_xfer_size, max_channel_xfer_size);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Schedules an interrupt or isochronous transfer in the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer. The QH should already contain the
-+ * scheduling information.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int status = 0;
-+
-+ status = periodic_channel_available(hcd);
-+ if (status) {
-+ DWC_NOTICE("%s: No host channel available for periodic "
-+ "transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ status = check_periodic_bandwidth(hcd, qh);
-+ if (status) {
-+ DWC_NOTICE("%s: Insufficient periodic bandwidth for "
-+ "periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ status = check_max_xfer_size(hcd, qh);
-+ if (status) {
-+ DWC_NOTICE("%s: Channel max transfer size too small "
-+ "for periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive);
-+
-+ /* Reserve the periodic channel. */
-+ hcd->periodic_channels++;
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs += qh->usecs;
-+
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval;
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * This function adds a QH to either the non periodic or periodic schedule if
-+ * it is not already in the schedule. If the QH is already in the schedule, no
-+ * action is taken.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ unsigned long flags;
-+ int status = 0;
-+
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags)
-+
-+ if (!list_empty(&qh->qh_list_entry)) {
-+ /* QH already in a schedule. */
-+ goto done;
-+ }
-+
-+ /* Add the new QH to the appropriate schedule */
-+ if (dwc_qh_is_non_per(qh)) {
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive);
-+ } else {
-+ status = schedule_periodic(hcd, qh);
-+ }
-+
-+ done:
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-+
-+ return status;
-+}
-+
-+/**
-+ * Removes an interrupt or isochronous transfer from the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer.
-+ */
-+static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ list_del_init(&qh->qh_list_entry);
-+
-+ /* Release the periodic channel reservation. */
-+ hcd->periodic_channels--;
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs -= qh->usecs;
-+
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval;
-+
-+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
-+ qh, qh->usecs, qh->interval);
-+ }
-+}
-+
-+/**
-+ * Removes a QH from either the non-periodic or periodic schedule. Memory is
-+ * not freed.
-+ *
-+ * @param[in] hcd The HCD state structure.
-+ * @param[in] qh QH to remove from schedule. */
-+void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ unsigned long flags;
-+
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+
-+ if (list_empty(&qh->qh_list_entry)) {
-+ /* QH is not in a schedule. */
-+ goto done;
-+ }
-+
-+ if (dwc_qh_is_non_per(qh)) {
-+ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+ list_del_init(&qh->qh_list_entry);
-+ } else {
-+ deschedule_periodic(hcd, qh);
-+ }
-+
-+ done:
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags)
-+}
-+
-+/**
-+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
-+ * non-periodic schedule. The QH is added to the inactive non-periodic
-+ * schedule if any QTDs are still attached to the QH.
-+ *
-+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
-+ * there are any QTDs still attached to the QH, the QH is added to either the
-+ * periodic inactive schedule or the periodic ready schedule and its next
-+ * scheduled frame is calculated. The QH is placed in the ready schedule if
-+ * the scheduled frame has been reached already. Otherwise it's placed in the
-+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
-+ * completely removed from the periodic schedule.
-+ */
-+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split)
-+{
-+ unsigned long flags;
-+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags);
-+
-+ if (dwc_qh_is_non_per(qh)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ if (!list_empty(&qh->qtd_list)) {
-+ /* Add back to inactive non-periodic schedule. */
-+ dwc_otg_hcd_qh_add(hcd, qh);
-+ }
-+ } else {
-+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd));
-+
-+ if (qh->do_split) {
-+ /* Schedule the next continuing periodic split transfer */
-+ if (sched_next_periodic_split) {
-+
-+ qh->sched_frame = frame_number;
-+ if (dwc_frame_num_le(frame_number,
-+ dwc_frame_num_inc(qh->start_split_frame, 1))) {
-+ /*
-+ * Allow one frame to elapse after start
-+ * split microframe before scheduling
-+ * complete split, but DONT if we are
-+ * doing the next start split in the
-+ * same frame for an ISOC out.
-+ */
-+ if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) {
-+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1);
-+ }
-+ }
-+ } else {
-+ qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame,
-+ qh->interval);
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+ } else {
-+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval);
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ }
-+
-+ if (list_empty(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ } else {
-+ /*
-+ * Remove from periodic_sched_queued and move to
-+ * appropriate queue.
-+ */
-+ if (qh->sched_frame == frame_number) {
-+ list_move(&qh->qh_list_entry,
-+ &hcd->periodic_sched_ready);
-+ } else {
-+ list_move(&qh->qh_list_entry,
-+ &hcd->periodic_sched_inactive);
-+ }
-+ }
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags);
-+}
-+
-+/**
-+ * This function allocates and initializes a QTD.
-+ *
-+ * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up
-+ * pointing to each other so each pair should have a unique correlation.
-+ *
-+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb)
-+{
-+ dwc_otg_qtd_t *qtd;
-+
-+ qtd = dwc_otg_hcd_qtd_alloc ();
-+ if (qtd == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qtd_init (qtd, urb);
-+ return qtd;
-+}
-+
-+/**
-+ * Initializes a QTD structure.
-+ *
-+ * @param[in] qtd The QTD to initialize.
-+ * @param[in] urb The URB to use for initialization. */
-+void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb)
-+{
-+ memset (qtd, 0, sizeof (dwc_otg_qtd_t));
-+ qtd->urb = urb;
-+ if (usb_pipecontrol(urb->pipe)) {
-+ /*
-+ * The only time the QTD data toggle is used is on the data
-+ * phase of control transfers. This phase always starts with
-+ * DATA1.
-+ */
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ qtd->control_phase = DWC_OTG_CONTROL_SETUP;
-+ }
-+
-+ /* start split */
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+
-+ /* Store the qtd ptr in the urb to reference what QTD. */
-+ urb->hcpriv = qtd;
-+ return;
-+}
-+
-+/**
-+ * This function adds a QTD to the QTD-list of a QH. It will find the correct
-+ * QH to place the QTD into. If it does not find a QH, then it will create a
-+ * new QH. If the QH to which the QTD is added is not currently scheduled, it
-+ * is placed into the proper schedule based on its EP type.
-+ *
-+ * @param[in] qtd The QTD to add
-+ * @param[in] dwc_otg_hcd The DWC HCD structure
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd,
-+ dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ struct usb_host_endpoint *ep;
-+ dwc_otg_qh_t *qh;
-+ unsigned long flags;
-+ int retval = 0;
-+
-+ struct urb *urb = qtd->urb;
-+
-+ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags);
-+
-+ /*
-+ * Get the QH which holds the QTD-list to insert to. Create QH if it
-+ * doesn't exist.
-+ */
-+ ep = dwc_urb_to_endpoint(urb);
-+ qh = (dwc_otg_qh_t *)ep->hcpriv;
-+ if (qh == NULL) {
-+ qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb);
-+ if (qh == NULL) {
-+ goto done;
-+ }
-+ ep->hcpriv = qh;
-+ }
-+
-+ retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh);
-+ if (retval == 0) {
-+ list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list);
-+ }
-+
-+ done:
-+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags);
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
-@@ -0,0 +1,2523 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
-+ * $Revision: 1.5 $
-+ * $Date: 2008-11-27 09:21:25 $
-+ * $Change: 1115682 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+/** @file
-+ * This file implements the Peripheral Controller Driver.
-+ *
-+ * The Peripheral Controller Driver (PCD) is responsible for
-+ * translating requests from the Function Driver into the appropriate
-+ * actions on the DWC_otg controller. It isolates the Function Driver
-+ * from the specifics of the controller by providing an API to the
-+ * Function Driver.
-+ *
-+ * The Peripheral Controller Driver for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used.
-+ * (Gadget Driver is the Linux terminology for a Function Driver.)
-+ *
-+ * The Linux Gadget API is defined in the header file
-+ * <code><linux/usb_gadget.h></code>. The USB EP operations API is
-+ * defined in the structure <code>usb_ep_ops</code> and the USB
-+ * Controller API is defined in the structure
-+ * <code>usb_gadget_ops</code>.
-+ *
-+ * An important function of the PCD is managing interrupts generated
-+ * by the DWC_otg controller. The implementation of the DWC_otg device
-+ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
-+ *
-+ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
-+ * @todo Does it work when the request size is greater than DEPTSIZ
-+ * transfer size
-+ *
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-+#include <linux/usb/gadget.h>
-+#else
-+#include <linux/usb_gadget.h>
-+#endif
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+
-+
-+/**
-+ * Static PCD pointer for use in usb_gadget_register_driver and
-+ * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
-+ */
-+static dwc_otg_pcd_t *s_pcd = 0;
-+
-+
-+/* Display the contents of the buffer */
-+extern void dump_msg(const u8 *buf, unsigned int length);
-+
-+
-+/**
-+ * This function completes a request. It call's the request call back.
-+ */
-+void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
-+ int status)
-+{
-+ unsigned stopped = ep->stopped;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
-+ list_del_init(&req->queue);
-+
-+ if (req->req.status == -EINPROGRESS) {
-+ req->req.status = status;
-+ } else {
-+ status = req->req.status;
-+ }
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ SPIN_UNLOCK(&ep->pcd->lock);
-+ req->req.complete(&ep->ep, &req->req);
-+ SPIN_LOCK(&ep->pcd->lock);
-+
-+ if (ep->pcd->request_pending > 0) {
-+ --ep->pcd->request_pending;
-+ }
-+
-+ ep->stopped = stopped;
-+}
-+
-+/**
-+ * This function terminates all the requsts in the EP request queue.
-+ */
-+void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_pcd_request_t *req;
-+
-+ ep->stopped = 1;
-+
-+ /* called with irqs blocked?? */
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-+ queue);
-+ dwc_otg_request_done(ep, req, -ESHUTDOWN);
-+ }
-+}
-+
-+/* USB Endpoint Operations */
-+/*
-+ * The following sections briefly describe the behavior of the Gadget
-+ * API endpoint operations implemented in the DWC_otg driver
-+ * software. Detailed descriptions of the generic behavior of each of
-+ * these functions can be found in the Linux header file
-+ * include/linux/usb_gadget.h.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
-+ * function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper
-+ * functions. Within each section, the corresponding DWC_otg PCD
-+ * function name is specified.
-+ *
-+ */
-+
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t PerTxMsk = 1;
-+ int i;
-+ for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
-+ {
-+ if((PerTxMsk & core_if->p_tx_msk) == 0) {
-+ core_if->p_tx_msk |= PerTxMsk;
-+ return i + 1;
-+ }
-+ PerTxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-+{
-+ core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
-+}
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
-+{
-+ uint32_t TxMsk = 1;
-+ int i;
-+
-+ for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
-+ {
-+ if((TxMsk & core_if->tx_msk) == 0) {
-+ core_if->tx_msk |= TxMsk;
-+ return i + 1;
-+ }
-+ TxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
-+{
-+ core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
-+}
-+
-+/**
-+ * This function is called by the Gadget Driver for each EP to be
-+ * configured for the current configuration (SET_CONFIGURATION).
-+ *
-+ * This function initializes the dwc_otg_ep_t data structure, and then
-+ * calls dwc_otg_ep_activate.
-+ */
-+static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
-+ const struct usb_endpoint_descriptor *ep_desc)
-+{
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ dwc_otg_pcd_t *pcd = 0;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !ep_desc || ep->desc ||
-+ ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
-+ DWC_WARN("%s, bad ep or descriptor\n", __func__);
-+ return -EINVAL;
-+ }
-+ if (ep == &ep->pcd->ep0) {
-+ DWC_WARN("%s, bad ep(0)\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ /* Check FIFO size? */
-+ if (!ep_desc->wMaxPacketSize) {
-+ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
-+ return -ERANGE;
-+ }
-+
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ ep->desc = ep_desc;
-+ ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
-+
-+ /*
-+ * Activate the EP
-+ */
-+ ep->stopped = 0;
-+
-+ ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
-+ ep->dwc_ep.maxpacket = ep->ep.maxpacket;
-+
-+ ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-+
-+ if(ep->dwc_ep.is_in) {
-+ if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
-+ ep->dwc_ep.tx_fifo_num = 0;
-+
-+ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
-+ /*
-+ * if ISOC EP then assign a Periodic Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
-+ }
-+ } else {
-+ /*
-+ * if Dedicated FIFOs mode is on then assign a Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
-+
-+ }
-+ }
-+ /* Set initial data PID. */
-+ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
-+ ep->dwc_ep.data_pid_start = 0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
-+ ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
-+ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
-+
-+ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
-+ ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-+ }
-+
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is called when an EP is disabled due to disconnect or
-+ * change in configuration. Any pending requests will terminate with a
-+ * status of -ESHUTDOWN.
-+ *
-+ * This function modifies the dwc_otg_ep_t data structure for this EP,
-+ * and then calls dwc_otg_ep_deactivate.
-+ */
-+static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !ep->desc) {
-+ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
-+ usb_ep ? ep->ep.name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+ dwc_otg_request_nuke(ep);
-+
-+ dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ if(ep->dwc_ep.is_in) {
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
-+ }
-+
-+ /* Free DMA Descriptors */
-+ pcd = ep->pcd;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-+
-+ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
-+ dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
-+ return 0;
-+}
-+
-+
-+/**
-+ * This function allocates a request object to use with the specified
-+ * endpoint.
-+ *
-+ * @param ep The endpoint to be used with with the request
-+ * @param gfp_flags the GFP_* flags to use.
-+ */
-+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ dwc_otg_pcd_request_t *req;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
-+ if (0 == ep) {
-+ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
-+ return 0;
-+ }
-+ req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
-+ if (0 == req) {
-+ DWC_WARN("%s() %s\n", __func__,
-+ "request allocation failed!\n");
-+ return 0;
-+ }
-+ memset(req, 0, sizeof(dwc_otg_pcd_request_t));
-+ req->req.dma = DMA_ADDR_INVALID;
-+ INIT_LIST_HEAD(&req->queue);
-+ return &req->req;
-+}
-+
-+/**
-+ * This function frees a request object.
-+ *
-+ * @param ep The endpoint associated with the request
-+ * @param req The request being freed
-+ */
-+static void dwc_otg_pcd_free_request(struct usb_ep *ep,
-+ struct usb_request *req)
-+{
-+ dwc_otg_pcd_request_t *request;
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
-+
-+ if (0 == ep || 0 == req) {
-+ DWC_WARN("%s() %s\n", __func__,
-+ "Invalid ep or req argument!\n");
-+ return;
-+ }
-+
-+ request = container_of(req, dwc_otg_pcd_request_t, req);
-+ kfree(request);
-+}
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
-+/**
-+ * This function allocates an I/O buffer to be used for a transfer
-+ * to/from the specified endpoint.
-+ *
-+ * @param usb_ep The endpoint to be used with with the request
-+ * @param bytes The desired number of bytes for the buffer
-+ * @param dma Pointer to the buffer's DMA address; must be valid
-+ * @param gfp_flags the GFP_* flags to use.
-+ * @return address of a new buffer or null is buffer could not be allocated.
-+ */
-+static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
-+ dma_addr_t *dma,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ void *buf;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ pcd = ep->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
-+ dma, gfp_flags);
-+
-+ /* Check dword alignment */
-+ if ((bytes & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer size is not a multiple of"
-+ "DWORD size (%d)",__func__, bytes);
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
-+ }
-+ else {
-+ buf = kmalloc(bytes, gfp_flags);
-+ }
-+
-+ /* Check dword alignment */
-+ if (((int)buf & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
-+ __func__, buf);
-+ }
-+
-+ return buf;
-+}
-+
-+/**
-+ * This function frees an I/O buffer that was allocated by alloc_buffer.
-+ *
-+ * @param usb_ep the endpoint associated with the buffer
-+ * @param buf address of the buffer
-+ * @param dma The buffer's DMA address
-+ * @param bytes The number of bytes of the buffer
-+ */
-+static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
-+ dma_addr_t dma, unsigned bytes)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ pcd = ep->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ dma_free_coherent (NULL, bytes, buf, dma);
-+ }
-+ else {
-+ kfree(buf);
-+ }
-+}
-+#endif
-+
-+
-+/**
-+ * This function is used to submit an I/O Request to an EP.
-+ *
-+ * - When the request completes the request's completion callback
-+ * is called to return the request to the driver.
-+ * - An EP, except control EPs, may have multiple requests
-+ * pending.
-+ * - Once submitted the request cannot be examined or modified.
-+ * - Each request is turned into one or more packets.
-+ * - A BULK EP can queue any amount of data; the transfer is
-+ * packetized.
-+ * - Zero length Packets are specified with the request 'zero'
-+ * flag.
-+ */
-+static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
-+ struct usb_request *usb_req,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+ )
-+{
-+ int prevented = 0;
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ unsigned long flags = 0;
-+ dwc_otg_core_if_t *_core_if;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
-+ __func__, usb_ep, usb_req, gfp_flags);
-+
-+ req = container_of(usb_req, dwc_otg_pcd_request_t, req);
-+ if (!usb_req || !usb_req->complete || !usb_req->buf ||
-+ !list_empty(&req->queue)) {
-+ DWC_WARN("%s, bad params\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
-+ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-+
-+ if (!GET_CORE_IF(pcd)->core_params->opt) {
-+ if (ep->dwc_ep.num != 0) {
-+ DWC_ERROR("%s queue req %p, len %d buf %p\n",
-+ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-+ }
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+
-+ /**************************************************
-+ New add by kaiker ,for DMA mode bug
-+ ************************************************/
-+ //by kaiker ,for RT3052 USB OTG device mode
-+
-+ _core_if = GET_CORE_IF(pcd);
-+
-+ if (_core_if->dma_enable)
-+ {
-+ usb_req->dma = virt_to_phys((void *)usb_req->buf);
-+
-+ if(ep->dwc_ep.is_in)
-+ {
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS)
-+ if(usb_req->length)
-+ dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2);
-+#endif
-+ }
-+ }
-+
-+
-+
-+#if defined(DEBUG) & defined(VERBOSE)
-+ dump_msg(usb_req->buf, usb_req->length);
-+#endif
-+
-+ usb_req->status = -EINPROGRESS;
-+ usb_req->actual = 0;
-+
-+ /*
-+ * For EP0 IN without premature status, zlp is required?
-+ */
-+ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
-+ DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
-+ //_req->zero = 1;
-+ }
-+
-+ /* Start the transfer */
-+ if (list_empty(&ep->queue) && !ep->stopped) {
-+ /* EP0 Transfer? */
-+ if (ep->dwc_ep.num == 0) {
-+ switch (pcd->ep0state) {
-+ case EP0_IN_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_DATA_PHASE\n",
-+ __func__);
-+ break;
-+
-+ case EP0_OUT_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_OUT_DATA_PHASE\n",
-+ __func__);
-+ if (pcd->request_config) {
-+ /* Complete STATUS PHASE */
-+ ep->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+ break;
-+
-+ case EP0_IN_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_STATUS_PHASE\n",
-+ __func__);
-+ break;
-+
-+ default:
-+ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
-+ pcd->ep0state);
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return -EL2HLT;
-+ }
-+ ep->dwc_ep.dma_addr = usb_req->dma;
-+ ep->dwc_ep.start_xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_len = usb_req->length;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ if(usb_req->zero) {
-+ if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.xfer_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ else {
-+
-+ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-+
-+ /* Setup and start the Transfer */
-+ ep->dwc_ep.dma_addr = usb_req->dma;
-+ ep->dwc_ep.start_xfer_buff = usb_req->buf;
-+ ep->dwc_ep.xfer_buff = usb_req->buf;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = usb_req->length;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+
-+ if(max_transfer > MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-+ } else {
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ }
-+
-+ if(usb_req->zero) {
-+ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ }
-+
-+ if ((req != 0) || prevented) {
-+ ++pcd->request_pending;
-+ list_add_tail(&req->queue, &ep->queue);
-+ if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
-+ /** @todo NGS Create a function for this. */
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.intktxfemp = 1;
-+ if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
-+ 0, diepmsk.d32);
-+ } else {
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
-+ }
-+ }
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return 0;
-+}
-+
-+/**
-+ * This function cancels an I/O request from an EP.
-+ */
-+static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
-+ struct usb_request *usb_req)
-+{
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+ if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
-+ DWC_WARN("%s, bad argument\n", __func__);
-+ return -EINVAL;
-+ }
-+ pcd = ep->pcd;
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+ DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
-+ ep->dwc_ep.is_in ? "IN" : "OUT",
-+ usb_req);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue)
-+ {
-+ if (&req->req == usb_req) {
-+ break;
-+ }
-+ }
-+
-+ if (&req->req != usb_req) {
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ if (!list_empty(&req->queue)) {
-+ dwc_otg_request_done(ep, req, -ECONNRESET);
-+ }
-+ else {
-+ req = 0;
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ return req ? 0 : -EOPNOTSUPP;
-+}
-+
-+/**
-+ * usb_ep_set_halt stalls an endpoint.
-+ *
-+ * usb_ep_clear_halt clears an endpoint halt and resets its data
-+ * toggle.
-+ *
-+ * Both of these functions are implemented with the same underlying
-+ * function. The behavior depends on the value argument.
-+ *
-+ * @param[in] usb_ep the Endpoint to halt or clear halt.
-+ * @param[in] value
-+ * - 0 means clear_halt.
-+ * - 1 means set_halt,
-+ * - 2 means clear stall lock flag.
-+ * - 3 means set stall lock flag.
-+ */
-+static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
-+{
-+ int retval = 0;
-+ unsigned long flags;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+
-+
-+ DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
-+ ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+ if (!list_empty(&ep->queue)) {
-+ DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
-+ retval = -EAGAIN;
-+ }
-+ else if (value == 0) {
-+ dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ else if(value == 1) {
-+ if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
-+ dtxfsts_data_t txstatus;
-+ fifosize_data_t txfifosize;
-+
-+ txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
-+ txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
-+
-+ if(txstatus.b.txfspcavail < txfifosize.b.depth) {
-+ DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
-+ retval = -EAGAIN;
-+ }
-+ else {
-+ if (ep->dwc_ep.num == 0) {
-+ ep->pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ }
-+ else {
-+ if (ep->dwc_ep.num == 0) {
-+ ep->pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
-+ &ep->dwc_ep);
-+ }
-+ }
-+ else if (value == 2) {
-+ ep->dwc_ep.stall_clear_flag = 0;
-+ }
-+ else if (value == 3) {
-+ ep->dwc_ep.stall_clear_flag = 1;
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
-+ return retval;
-+}
-+
-+/**
-+ * This function allocates a DMA Descriptor chain for the Endpoint
-+ * buffer to be used for a transfer to/from the specified endpoint.
-+ */
-+dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
-+{
-+
-+ return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
-+}
-+
-+/**
-+ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
-+ */
-+void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
-+{
-+ dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+
-+ dsts_data_t dsts = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+ int i, j;
-+
-+ if(dwc_ep->is_in)
-+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
-+ else
-+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+
-+
-+ /** Allocate descriptors for double buffering */
-+ dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
-+ if(dwc_ep->desc_addr) {
-+ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
-+ return;
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ desc_sts_data_t sts = { .d32 =0 };
-+ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ uint32_t data_per_desc;
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[dwc_ep->num];
-+ int offset;
-+
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
-+
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ offset = 0;
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ (uint32_t)dma_ad += data_per_desc;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ (uint32_t)dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_out.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ offset = 0;
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ (uint32_t)dma_ad += data_per_desc;
-+ }
-+ }
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ (uint32_t)dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = 1;
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = 0;
-+
-+ /** Write dma_ad into DOEPDMA register */
-+ dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-+
-+ }
-+ /** ISO IN EP */
-+ else {
-+ desc_sts_data_t sts = { .d32 =0 };
-+ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[dwc_ep->num];
-+ unsigned int frmnumber;
-+ fifosize_data_t txfifosize,rxfifosize;
-+
-+ txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
-+ rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
-+
-+
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+
-+
-+ frmnumber = dwc_ep->next_frame;
-+
-+ sts.b_iso_in.framenum = frmnumber;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ /** Buffer 0 descriptors setup */
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ (uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ ++dma_desc;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_in.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ dma_desc ++;
-+
-+ (uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+
-+ sts.b_iso_in.ioc = 0;
-+ }
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = 1;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
-+
-+ /** Write dma_ad into diepdma register */
-+ dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.usbactep = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+ depctl.d32 = dwc_read_reg32(addr);
-+}
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+
-+void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+
-+ if(ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+
-+ if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
-+ return;
-+ } else {
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+
-+ ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
-+ ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+
-+ if(ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.mc = ep->pkt_per_frm;
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) /
-+ ep->maxpacket;
-+ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
-+
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
-+
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(addr, depctl.d32,depctl.d32);
-+ }
-+}
-+
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable) {
-+ if(ep->is_in) {
-+ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
-+ } else {
-+ ep->desc_cnt = ep->pkt_cnt;
-+ }
-+ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
-+ } else {
-+ if(core_if->pti_enh_enable) {
-+ dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
-+ } else {
-+ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+ }
-+ } else {
-+ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ depctl_data_t depctl = { .d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if(ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ }
-+ else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ /* disable the ep */
-+ depctl.d32 = dwc_read_reg32(addr);
-+
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+
-+ if(core_if->dma_desc_enable &&
-+ ep->iso_desc_addr && ep->iso_dma_desc_addr) {
-+ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
-+ }
-+
-+ /* reset varibales */
-+ ep->dma_addr0 = 0;
-+ ep->dma_addr1 = 0;
-+ ep->xfer_buff0 = 0;
-+ ep->xfer_buff1 = 0;
-+ ep->data_per_frame = 0;
-+ ep->data_pattern_frame = 0;
-+ ep->sync_frame = 0;
-+ ep->buf_proc_intrvl = 0;
-+ ep->bInterval = 0;
-+ ep->proc_buf_num = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->desc_cnt = 0;
-+ ep->iso_desc_addr = 0;
-+ ep->iso_dma_desc_addr = 0;
-+}
-+
-+
-+/**
-+ * This function is used to submit an ISOC Transfer Request to an EP.
-+ *
-+ * - Every time a sync period completes the request's completion callback
-+ * is called to provide data to the gadget driver.
-+ * - Once submitted the request cannot be modified.
-+ * - Each request is turned into periodic data packets untill ISO
-+ * Transfer is stopped..
-+ */
-+static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ dwc_ep_t *dwc_ep;
-+ unsigned long flags = 0;
-+ int32_t frm_data;
-+ dwc_otg_core_if_t *core_if;
-+ dcfg_data_t dcfg;
-+ dsts_data_t dsts;
-+
-+
-+ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
-+ DWC_WARN("%s, bad params\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+ core_if = GET_CORE_IF(pcd);
-+
-+ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
-+
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(ep->iso_req) {
-+ DWC_WARN("%s, iso request in progress\n", __func__);
-+ }
-+ req->status = -EINPROGRESS;
-+
-+ dwc_ep->dma_addr0 = req->dma0;
-+ dwc_ep->dma_addr1 = req->dma1;
-+
-+ dwc_ep->xfer_buff0 = req->buf0;
-+ dwc_ep->xfer_buff1 = req->buf1;
-+
-+ ep->iso_req = req;
-+
-+ dwc_ep->data_per_frame = req->data_per_frame;
-+
-+ /** @todo - pattern data support is to be implemented in the future */
-+ dwc_ep->data_pattern_frame = req->data_pattern_frame;
-+ dwc_ep->sync_frame = req->sync_frame;
-+
-+ dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
-+
-+ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
-+
-+ dwc_ep->proc_buf_num = 0;
-+
-+ dwc_ep->pkt_per_frm = 0;
-+ frm_data = ep->dwc_ep.data_per_frame;
-+ while(frm_data > 0) {
-+ dwc_ep->pkt_per_frm++;
-+ frm_data -= ep->dwc_ep.maxpacket;
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ if(req->flags & USB_REQ_ISO_ASAP) {
-+ dwc_ep->next_frame = dsts.b.soffn + 1;
-+ if(dwc_ep->bInterval != 1){
-+ dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
-+ }
-+ } else {
-+ dwc_ep->next_frame = req->start_frame;
-+ }
-+
-+
-+ if(!core_if->pti_enh_enable) {
-+ dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+ } else {
-+ dwc_ep->pkt_cnt =
-+ (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
-+ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
-+ }
-+
-+ if(core_if->dma_desc_enable) {
-+ dwc_ep->desc_cnt =
-+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
-+ }
-+
-+ dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
-+ if(!dwc_ep->pkt_info) {
-+ return -ENOMEM;
-+ }
-+ if(core_if->pti_enh_enable) {
-+ memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-+ }
-+
-+ dwc_ep->cur_pkt = 0;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function stops ISO EP Periodic Data Transfer.
-+ */
-+static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_t *pcd;
-+ dwc_ep_t *dwc_ep;
-+ unsigned long flags;
-+
-+ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
-+
-+ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ pcd = ep->pcd;
-+
-+ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
-+
-+ kfree(dwc_ep->pkt_info);
-+
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ if(ep->iso_req != req) {
-+ return -EINVAL;
-+ }
-+
-+ req->status = -ECONNRESET;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+
-+
-+ ep->iso_req = 0;
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is used for perodical data exchnage between PCD and gadget drivers.
-+ * for Isochronous EPs
-+ *
-+ * - Every time a sync period completes this function is called to
-+ * perform data exchange between PCD and gadget
-+ */
-+void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
-+{
-+ int i;
-+ struct usb_gadget_iso_packet_descriptor *iso_packet;
-+ dwc_ep_t *dwc_ep;
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(ep->iso_req->status == -ECONNRESET) {
-+ DWC_PRINT("Device has already disconnected\n");
-+ /*Device has been disconnected*/
-+ return;
-+ }
-+
-+ if(dwc_ep->proc_buf_num != 0) {
-+ iso_packet = ep->iso_req->iso_packet_desc0;
-+ }
-+
-+ else {
-+ iso_packet = ep->iso_req->iso_packet_desc1;
-+ }
-+
-+ /* Fill in ISOC packets descriptors & pass to gadget driver*/
-+
-+ for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
-+ iso_packet[i].status = dwc_ep->pkt_info[i].status;
-+ iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
-+ iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
-+ dwc_ep->pkt_info[i].status = 0;
-+ dwc_ep->pkt_info[i].offset = 0;
-+ dwc_ep->pkt_info[i].length = 0;
-+ }
-+
-+ /* Call callback function to process data buffer */
-+ ep->iso_req->status = 0;/* success */
-+
-+ SPIN_UNLOCK(&ep->pcd->lock);
-+ ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
-+ SPIN_LOCK(&ep->pcd->lock);
-+}
-+
-+
-+static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ int gfp_flags
-+#else
-+ gfp_t gfp_flags
-+#endif
-+)
-+{
-+ struct usb_iso_request *pReq = NULL;
-+ uint32_t req_size;
-+
-+
-+ req_size = sizeof(struct usb_iso_request);
-+ req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
-+
-+
-+ pReq = kmalloc(req_size, gfp_flags);
-+ if (!pReq) {
-+ DWC_WARN("%s, can't allocate Iso Request\n", __func__);
-+ return 0;
-+ }
-+ pReq->iso_packet_desc0 = (void*) (pReq + 1);
-+
-+ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
-+
-+ return pReq;
-+}
-+
-+static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
-+{
-+ kfree(req);
-+}
-+
-+static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
-+{
-+ .ep_ops =
-+ {
-+ .enable = dwc_otg_pcd_ep_enable,
-+ .disable = dwc_otg_pcd_ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
-+ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+ .free_buffer = dwc_otg_pcd_free_buffer,
-+#endif
-+
-+ .queue = dwc_otg_pcd_ep_queue,
-+ .dequeue = dwc_otg_pcd_ep_dequeue,
-+
-+ .set_halt = dwc_otg_pcd_ep_set_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+ },
-+ .iso_ep_start = dwc_otg_pcd_iso_ep_start,
-+ .iso_ep_stop = dwc_otg_pcd_iso_ep_stop,
-+ .alloc_iso_request = dwc_otg_pcd_alloc_iso_request,
-+ .free_iso_request = dwc_otg_pcd_free_iso_request,
-+};
-+
-+#else
-+
-+
-+static struct usb_ep_ops dwc_otg_pcd_ep_ops =
-+{
-+ .enable = dwc_otg_pcd_ep_enable,
-+ .disable = dwc_otg_pcd_ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
-+ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+ .free_buffer = dwc_otg_pcd_free_buffer,
-+#endif
-+
-+ .queue = dwc_otg_pcd_ep_queue,
-+ .dequeue = dwc_otg_pcd_ep_dequeue,
-+
-+ .set_halt = dwc_otg_pcd_ep_set_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+
-+
-+};
-+
-+#endif /* DWC_EN_ISOC */
-+/* Gadget Operations */
-+/**
-+ * The following gadget operations will be implemented in the DWC_otg
-+ * PCD. Functions in the API that are not described below are not
-+ * implemented.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
-+ * wrapper function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper functions
-+ * (except for ioctl, which doesn't have a wrapper function). Within
-+ * each section, the corresponding DWC_otg PCD function name is
-+ * specified.
-+ *
-+ */
-+
-+/**
-+ *Gets the USB Frame number of the last SOF.
-+ */
-+static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
-+{
-+ dwc_otg_pcd_t *pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ }
-+ else {
-+ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-+ dwc_otg_get_frame_number(GET_CORE_IF(pcd));
-+ }
-+
-+ return 0;
-+}
-+
-+void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
-+{
-+ uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ gotgctl_data_t val;
-+
-+ val.d32 = dwc_read_reg32(addr);
-+ if (val.b.sesreq) {
-+ DWC_ERROR("Session Request Already active!\n");
-+ return;
-+ }
-+
-+ DWC_NOTICE("Session Request Initated\n");
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.sesreq = 1;
-+ dwc_write_reg32(addr, mem.d32);
-+
-+ /* Start the SRP timer */
-+ dwc_otg_pcd_start_srp_timer(pcd);
-+ return;
-+}
-+
-+void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
-+{
-+ dctl_data_t dctl = {.d32=0};
-+ volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
-+
-+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-+ if (pcd->remote_wakeup_enable) {
-+ if (set) {
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(addr, 0, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
-+ mdelay(1);
-+ dwc_modify_reg32(addr, dctl.d32, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
-+ }
-+ else {
-+ }
-+ }
-+ else {
-+ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
-+ }
-+ }
-+ return;
-+}
-+
-+/**
-+ * Initiates Session Request Protocol (SRP) to wakeup the host if no
-+ * session is in progress. If a session is already in progress, but
-+ * the device is suspended, remote wakeup signaling is started.
-+ *
-+ */
-+static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
-+{
-+ unsigned long flags;
-+ dwc_otg_pcd_t *pcd;
-+ dsts_data_t dsts;
-+ gotgctl_data_t gotgctl;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ }
-+ else {
-+ pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
-+ }
-+ SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
-+
-+ /*
-+ * This function starts the Protocol if no session is in progress. If
-+ * a session is already in progress, but the device is suspended,
-+ * remote wakeup signaling is started.
-+ */
-+
-+ /* Check if valid session */
-+ gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
-+ if (gotgctl.b.bsesvld) {
-+ /* Check if suspend state */
-+ dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
-+ if (dsts.b.suspsts) {
-+ dwc_otg_pcd_remote_wakeup(pcd, 1);
-+ }
-+ }
-+ else {
-+ dwc_otg_pcd_initiate_srp(pcd);
-+ }
-+
-+ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
-+ return 0;
-+}
-+
-+static const struct usb_gadget_ops dwc_otg_pcd_ops =
-+{
-+ .get_frame = dwc_otg_pcd_get_frame,
-+ .wakeup = dwc_otg_pcd_wakeup,
-+ // current versions must always be self-powered
-+};
-+
-+/**
-+ * This function updates the otg values in the gadget structure.
-+ */
-+void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
-+{
-+
-+ if (!pcd->gadget.is_otg)
-+ return;
-+
-+ if (reset) {
-+ pcd->b_hnp_enable = 0;
-+ pcd->a_hnp_support = 0;
-+ pcd->a_alt_hnp_support = 0;
-+ }
-+
-+ pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
-+ pcd->gadget.a_hnp_support = pcd->a_hnp_support;
-+ pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
-+}
-+
-+/**
-+ * This function is the top level PCD interrupt handler.
-+ */
-+static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+ , struct pt_regs *r
-+#endif
-+ )
-+{
-+ dwc_otg_pcd_t *pcd = dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_pcd_handle_intr(pcd);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * PCD Callback function for initializing the PCD when switching to
-+ * device mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_start_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ /*
-+ * Initialized the Core for Device mode.
-+ */
-+ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
-+ dwc_otg_core_dev_init(GET_CORE_IF(pcd));
-+ }
-+ return 1;
-+}
-+
-+/**
-+ * PCD Callback function for stopping the PCD when switching to Host
-+ * mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_stop_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
-+
-+ dwc_otg_pcd_stop(pcd);
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback function for notifying the PCD when resuming from
-+ * suspend.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_suspend_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ if (pcd->driver && pcd->driver->resume) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->suspend(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback function for notifying the PCD when resuming from
-+ * suspend.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_resume_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
-+
-+ if (pcd->driver && pcd->driver->resume) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->resume(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+
-+ /* Stop the SRP timeout timer. */
-+ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
-+ (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
-+ if (GET_CORE_IF(pcd)->srp_timer_started) {
-+ GET_CORE_IF(pcd)->srp_timer_started = 0;
-+ del_timer(&pcd->srp_timer);
-+ }
-+ }
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t pcd_callbacks =
-+{
-+ .start = dwc_otg_pcd_start_cb,
-+ .stop = dwc_otg_pcd_stop_cb,
-+ .suspend = dwc_otg_pcd_suspend_cb,
-+ .resume_wakeup = dwc_otg_pcd_resume_cb,
-+ .p = 0, /* Set at registration */
-+};
-+
-+/**
-+ * This function is called when the SRP timer expires. The SRP should
-+ * complete within 6 seconds.
-+ */
-+static void srp_timeout(unsigned long ptr)
-+{
-+ gotgctl_data_t gotgctl;
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
-+ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
-+
-+ gotgctl.d32 = dwc_read_reg32(addr);
-+
-+ core_if->srp_timer_started = 0;
-+
-+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->core_params->i2c_enable)) {
-+ DWC_PRINT("SRP Timeout\n");
-+
-+ if ((core_if->srp_success) &&
-+ (gotgctl.b.bsesvld)) {
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+
-+ core_if->srp_success = 0;
-+ }
-+ else {
-+ DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ dwc_write_reg32(addr, gotgctl.d32);
-+ }
-+ }
-+ else if (gotgctl.b.sesreq) {
-+ DWC_PRINT("SRP Timeout\n");
-+
-+ DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ dwc_write_reg32(addr, gotgctl.d32);
-+ }
-+ else {
-+ DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
-+ }
-+}
-+
-+/**
-+ * Start the SRP timer to detect when the SRP does not complete within
-+ * 6 seconds.
-+ *
-+ * @param pcd the pcd structure.
-+ */
-+void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
-+{
-+ struct timer_list *srp_timer = &pcd->srp_timer;
-+ GET_CORE_IF(pcd)->srp_timer_started = 1;
-+ init_timer(srp_timer);
-+ srp_timer->function = srp_timeout;
-+ srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
-+ srp_timer->expires = jiffies + (HZ*6);
-+ add_timer(srp_timer);
-+}
-+
-+/**
-+ * Tasklet
-+ *
-+ */
-+extern void start_next_request(dwc_otg_pcd_ep_t *ep);
-+
-+static void start_xfer_tasklet_func (unsigned long data)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
-+ dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
-+
-+ int i;
-+ depctl_data_t diepctl;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
-+
-+ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
-+
-+ if (pcd->ep0.queue_sof) {
-+ pcd->ep0.queue_sof = 0;
-+ start_next_request (&pcd->ep0);
-+ // break;
-+ }
-+
-+ for (i=0; i<core_if->dev_if->num_in_eps; i++)
-+ {
-+ depctl_data_t diepctl;
-+ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-+
-+ if (pcd->in_ep[i].queue_sof) {
-+ pcd->in_ep[i].queue_sof = 0;
-+ start_next_request (&pcd->in_ep[i]);
-+ // break;
-+ }
-+ }
-+
-+ return;
-+}
-+
-+
-+
-+
-+
-+
-+
-+static struct tasklet_struct start_xfer_tasklet = {
-+ .next = NULL,
-+ .state = 0,
-+ .count = ATOMIC_INIT(0),
-+ .func = start_xfer_tasklet_func,
-+ .data = 0,
-+};
-+/**
-+ * This function initialized the pcd Dp structures to there default
-+ * state.
-+ *
-+ * @param pcd the pcd structure.
-+ */
-+void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
-+{
-+ static const char * names[] =
-+ {
-+
-+ "ep0",
-+ "ep1in",
-+ "ep2in",
-+ "ep3in",
-+ "ep4in",
-+ "ep5in",
-+ "ep6in",
-+ "ep7in",
-+ "ep8in",
-+ "ep9in",
-+ "ep10in",
-+ "ep11in",
-+ "ep12in",
-+ "ep13in",
-+ "ep14in",
-+ "ep15in",
-+ "ep1out",
-+ "ep2out",
-+ "ep3out",
-+ "ep4out",
-+ "ep5out",
-+ "ep6out",
-+ "ep7out",
-+ "ep8out",
-+ "ep9out",
-+ "ep10out",
-+ "ep11out",
-+ "ep12out",
-+ "ep13out",
-+ "ep14out",
-+ "ep15out"
-+
-+ };
-+
-+ int i;
-+ int in_ep_cntr, out_ep_cntr;
-+ uint32_t hwcfg1;
-+ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
-+ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-+
-+ INIT_LIST_HEAD (&pcd->gadget.ep_list);
-+ pcd->gadget.ep0 = &pcd->ep0.ep;
-+ pcd->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
-+
-+ /**
-+ * Initialize the EP0 structure.
-+ */
-+ ep = &pcd->ep0;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.num = 0;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+ ep->dwc_ep.desc_addr = 0;
-+ ep->dwc_ep.dma_desc_addr = 0;
-+
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[0];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ /**
-+ * Initialize the EP structures.
-+ */
-+ in_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
-+
-+ for (i = 1; in_ep_cntr < num_in_eps; i++)
-+ {
-+ if((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
-+ in_ep_cntr ++;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.is_in = 1;
-+ ep->dwc_ep.num = i;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+ ep->dwc_ep.desc_addr = 0;
-+ ep->dwc_ep.dma_desc_addr = 0;
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[i];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ out_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
-+
-+ for (i = 1; out_ep_cntr < num_out_eps; i++)
-+ {
-+ if((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
-+ out_ep_cntr++;
-+
-+ /* Init EP structure */
-+ ep->desc = 0;
-+ ep->pcd = pcd;
-+ ep->stopped = 1;
-+
-+ /* Init DWC ep structure */
-+ ep->dwc_ep.is_in = 0;
-+ ep->dwc_ep.num = i;
-+ ep->dwc_ep.active = 0;
-+ ep->dwc_ep.tx_fifo_num = 0;
-+ /* Control until ep is actvated */
-+ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ ep->dwc_ep.dma_addr = 0;
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = 0;
-+ ep->queue_sof = 0;
-+
-+ /* Init the usb_ep structure. */
-+ ep->ep.name = names[15 + i];
-+ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->ep.maxpacket = MAX_PACKET_SIZE;
-+
-+ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
-+
-+ INIT_LIST_HEAD (&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ /* remove ep0 from the list. There is a ep0 pointer.*/
-+ list_del_init (&pcd->ep0.ep.ep_list);
-+
-+ pcd->ep0state = EP0_DISCONNECT;
-+ pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
-+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
-+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+}
-+
-+/**
-+ * This function releases the Gadget device.
-+ * required by device_unregister().
-+ *
-+ * @todo Should this do something? Should it free the PCD?
-+ */
-+static void dwc_otg_pcd_gadget_release(struct device *dev)
-+{
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
-+}
-+
-+
-+
-+/**
-+ * This function initialized the PCD portion of the driver.
-+ *
-+ */
-+
-+int dwc_otg_pcd_init(struct device *dev)
-+{
-+ static char pcd_name[] = "dwc_otg_pcd";
-+ dwc_otg_pcd_t *pcd;
-+ dwc_otg_core_if_t* core_if;
-+ dwc_otg_dev_if_t* dev_if;
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
-+ int retval = 0;
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev);
-+ /*
-+ * Allocate PCD structure
-+ */
-+ pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
-+
-+ if (pcd == 0) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(pcd, 0, sizeof(dwc_otg_pcd_t));
-+ spin_lock_init(&pcd->lock);
-+
-+ otg_dev->pcd = pcd;
-+ s_pcd = pcd;
-+ pcd->gadget.name = pcd_name;
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
-+ strcpy(pcd->gadget.dev.bus_id, "gadget");
-+#else
-+ dev_set_name(&pcd->gadget.dev, "%s", "gadget");
-+#endif
-+
-+ pcd->otg_dev = dev_get_drvdata(dev);
-+
-+ pcd->gadget.dev.parent = dev;
-+ pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
-+ pcd->gadget.ops = &dwc_otg_pcd_ops;
-+
-+ core_if = GET_CORE_IF(pcd);
-+ dev_if = core_if->dev_if;
-+
-+ if(core_if->hwcfg4.b.ded_fifo_en) {
-+ DWC_PRINT("Dedicated Tx FIFOs mode\n");
-+ }
-+ else {
-+ DWC_PRINT("Shared Tx FIFO mode\n");
-+ }
-+
-+ /* If the module is set to FS or if the PHY_TYPE is FS then the gadget
-+ * should not report as dual-speed capable. replace the following line
-+ * with the block of code below it once the software is debugged for
-+ * this. If is_dualspeed = 0 then the gadget driver should not report
-+ * a device qualifier descriptor when queried. */
-+ if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
-+ ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
-+ (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
-+ (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
-+ pcd->gadget.is_dualspeed = 0;
-+ }
-+ else {
-+ pcd->gadget.is_dualspeed = 1;
-+ }
-+
-+ if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-+ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-+ pcd->gadget.is_otg = 0;
-+ }
-+ else {
-+ pcd->gadget.is_otg = 1;
-+ }
-+
-+
-+ pcd->driver = 0;
-+ /* Register the gadget device */
-+ retval = device_register(&pcd->gadget.dev);
-+ if (retval != 0) {
-+ kfree (pcd);
-+ return retval;
-+ }
-+
-+
-+ /*
-+ * Initialized the Core for Device mode.
-+ */
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dwc_otg_core_dev_init(core_if);
-+ }
-+
-+ /*
-+ * Initialize EP structures
-+ */
-+ dwc_otg_pcd_reinit(pcd);
-+
-+ /*
-+ * Register the PCD Callbacks.
-+ */
-+ dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
-+ pcd);
-+ /*
-+ * Setup interupt handler
-+ */
-+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
-+ retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
-+ IRQF_SHARED, pcd->gadget.name, pcd);
-+ if (retval != 0) {
-+ DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -EBUSY;
-+ }
-+
-+ /*
-+ * Initialize the DMA buffer for SETUP packets
-+ */
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
-+ if (pcd->setup_pkt == 0) {
-+ free_irq(otg_dev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
-+ if (pcd->status_buf == 0) {
-+ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+ free_irq(otg_dev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
-+ dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
-+ dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
-+ dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
-+
-+ if(dev_if->setup_desc_addr[0] == 0
-+ || dev_if->setup_desc_addr[1] == 0
-+ || dev_if->in_desc_addr == 0
-+ || dev_if->out_desc_addr == 0 ) {
-+
-+ if(dev_if->out_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-+ if(dev_if->in_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-+ if(dev_if->setup_desc_addr[1])
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-+ if(dev_if->setup_desc_addr[0])
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-+
-+
-+ dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
-+ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+
-+ free_irq(otg_dev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+
-+ return -ENOMEM;
-+ }
-+ }
-+ }
-+ else {
-+ pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
-+ if (pcd->setup_pkt == 0) {
-+ free_irq(otg_dev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+
-+ pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
-+ if (pcd->status_buf == 0) {
-+ kfree(pcd->setup_pkt);
-+ free_irq(otg_dev->irq, pcd);
-+ device_unregister(&pcd->gadget.dev);
-+ kfree (pcd);
-+ return -ENOMEM;
-+ }
-+ }
-+
-+
-+ /* Initialize tasklet */
-+ start_xfer_tasklet.data = (unsigned long)pcd;
-+ pcd->start_xfer_tasklet = &start_xfer_tasklet;
-+
-+ return 0;
-+}
-+
-+/**
-+ * Cleanup the PCD.
-+ */
-+void dwc_otg_pcd_remove(struct device *dev)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev);
-+ dwc_otg_pcd_t *pcd = otg_dev->pcd;
-+ dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
-+
-+ /*
-+ * Free the IRQ
-+ */
-+ free_irq(otg_dev->irq, pcd);
-+
-+ /* start with the driver above us */
-+ if (pcd->driver) {
-+ /* should have been done already by driver model core */
-+ DWC_WARN("driver '%s' is still registered\n",
-+ pcd->driver->driver.name);
-+ usb_gadget_unregister_driver(pcd->driver);
-+ }
-+ device_unregister(&pcd->gadget.dev);
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+ dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
-+ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
-+ }
-+ }
-+ else {
-+ kfree (pcd->setup_pkt);
-+ kfree (pcd->status_buf);
-+ }
-+
-+ kfree(pcd);
-+ otg_dev->pcd = 0;
-+}
-+
-+/**
-+ * This function registers a gadget driver with the PCD.
-+ *
-+ * When a driver is successfully registered, it will receive control
-+ * requests including set_configuration(), which enables non-control
-+ * requests. then usb traffic follows until a disconnect is reported.
-+ * then a host may connect again, or the driver might get unbound.
-+ *
-+ * @param driver The driver being registered
-+ */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
-+int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *))
-+#else
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+#endif
-+{
-+ int retval;
-+ int (*d_bind)(struct usb_gadget *);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
-+ d_bind = bind;
-+#else
-+ d_bind = driver->bind;
-+#endif
-+
-+ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name);
-+
-+ if (!driver || driver->speed == USB_SPEED_UNKNOWN ||
-+ !d_bind ||
-+ !driver->unbind ||
-+ !driver->disconnect ||
-+ !driver->setup) {
-+ DWC_DEBUGPL(DBG_PCDV,"EINVAL\n");
-+ return -EINVAL;
-+ }
-+ if (s_pcd == 0) {
-+ DWC_DEBUGPL(DBG_PCDV,"ENODEV\n");
-+ return -ENODEV;
-+ }
-+ if (s_pcd->driver != 0) {
-+ DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver);
-+ return -EBUSY;
-+ }
-+
-+ /* hook up the driver */
-+ s_pcd->driver = driver;
-+ s_pcd->gadget.dev.driver = &driver->driver;
-+
-+ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
-+ retval = d_bind(&s_pcd->gadget);
-+ if (retval) {
-+ DWC_ERROR("bind to driver %s --> error %d\n",
-+ driver->driver.name, retval);
-+ s_pcd->driver = 0;
-+ s_pcd->gadget.dev.driver = 0;
-+ return retval;
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
-+ driver->driver.name);
-+ return 0;
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)
-+EXPORT_SYMBOL(usb_gadget_probe_driver);
-+#else
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+#endif
-+
-+/**
-+ * This function unregisters a gadget driver
-+ *
-+ * @param driver The driver being unregistered
-+ */
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
-+
-+ if (s_pcd == 0) {
-+ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
-+ -ENODEV);
-+ return -ENODEV;
-+ }
-+ if (driver == 0 || driver != s_pcd->driver) {
-+ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
-+ -EINVAL);
-+ return -EINVAL;
-+ }
-+
-+ driver->unbind(&s_pcd->gadget);
-+ s_pcd->driver = 0;
-+
-+ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n",
-+ driver->driver.name);
-+ return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
-@@ -0,0 +1,248 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1103515 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+#if !defined(__DWC_PCD_H__)
-+#define __DWC_PCD_H__
-+
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-+#include <linux/usb/gadget.h>
-+#else
-+#include <linux/usb_gadget.h>
-+#endif
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+
-+struct dwc_otg_device;
-+
-+#include "dwc_otg_cil.h"
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Perpherial Contoller Driver (PCD).
-+ *
-+ * The Peripheral Controller Driver (PCD) for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used. For
-+ * the Mass Storage Function driver the File-backed USB Storage Gadget
-+ * (FBS) driver will be used. The FBS driver supports the
-+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
-+ * transports.
-+ *
-+ */
-+
-+/** Invalid DMA Address */
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+/** Maxpacket size for EP0 */
-+#define MAX_EP0_SIZE 64
-+/** Maxpacket size for any EP */
-+#define MAX_PACKET_SIZE 1024
-+
-+/** Max Transfer size for any EP */
-+#define MAX_TRANSFER_SIZE 65535
-+
-+/** Max DMA Descriptor count for any EP */
-+#define MAX_DMA_DESC_CNT 64
-+
-+/**
-+ * Get the pointer to the core_if from the pcd pointer.
-+ */
-+#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if)
-+
-+/**
-+ * States of EP0.
-+ */
-+typedef enum ep0_state
-+{
-+ EP0_DISCONNECT, /* no host */
-+ EP0_IDLE,
-+ EP0_IN_DATA_PHASE,
-+ EP0_OUT_DATA_PHASE,
-+ EP0_IN_STATUS_PHASE,
-+ EP0_OUT_STATUS_PHASE,
-+ EP0_STALL,
-+} ep0state_e;
-+
-+/** Fordward declaration.*/
-+struct dwc_otg_pcd;
-+
-+/** DWC_otg iso request structure.
-+ *
-+ */
-+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
-+
-+/** PCD EP structure.
-+ * This structure describes an EP, there is an array of EPs in the PCD
-+ * structure.
-+ */
-+typedef struct dwc_otg_pcd_ep
-+{
-+ /** USB EP data */
-+ struct usb_ep ep;
-+ /** USB EP Descriptor */
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ /** queue of dwc_otg_pcd_requests. */
-+ struct list_head queue;
-+ unsigned stopped : 1;
-+ unsigned disabling : 1;
-+ unsigned dma : 1;
-+ unsigned queue_sof : 1;
-+
-+#ifdef DWC_EN_ISOC
-+ /** DWC_otg Isochronous Transfer */
-+ struct usb_iso_request* iso_req;
-+#endif //DWC_EN_ISOC
-+
-+ /** DWC_otg ep data. */
-+ dwc_ep_t dwc_ep;
-+
-+ /** Pointer to PCD */
-+ struct dwc_otg_pcd *pcd;
-+}dwc_otg_pcd_ep_t;
-+
-+
-+
-+/** DWC_otg PCD Structure.
-+ * This structure encapsulates the data for the dwc_otg PCD.
-+ */
-+typedef struct dwc_otg_pcd
-+{
-+ /** USB gadget */
-+ struct usb_gadget gadget;
-+ /** USB gadget driver pointer*/
-+ struct usb_gadget_driver *driver;
-+ /** The DWC otg device pointer. */
-+ struct dwc_otg_device *otg_dev;
-+
-+ /** State of EP0 */
-+ ep0state_e ep0state;
-+ /** EP0 Request is pending */
-+ unsigned ep0_pending : 1;
-+ /** Indicates when SET CONFIGURATION Request is in process */
-+ unsigned request_config : 1;
-+ /** The state of the Remote Wakeup Enable. */
-+ unsigned remote_wakeup_enable : 1;
-+ /** The state of the B-Device HNP Enable. */
-+ unsigned b_hnp_enable : 1;
-+ /** The state of A-Device HNP Support. */
-+ unsigned a_hnp_support : 1;
-+ /** The state of the A-Device Alt HNP support. */
-+ unsigned a_alt_hnp_support : 1;
-+ /** Count of pending Requests */
-+ unsigned request_pending;
-+
-+ /** SETUP packet for EP0
-+ * This structure is allocated as a DMA buffer on PCD initialization
-+ * with enough space for up to 3 setup packets.
-+ */
-+ union
-+ {
-+ struct usb_ctrlrequest req;
-+ uint32_t d32[2];
-+ } *setup_pkt;
-+
-+ dma_addr_t setup_pkt_dma_handle;
-+
-+ /** 2-byte dma buffer used to return status from GET_STATUS */
-+ uint16_t *status_buf;
-+ dma_addr_t status_buf_dma_handle;
-+
-+ /** EP0 */
-+ dwc_otg_pcd_ep_t ep0;
-+
-+ /** Array of IN EPs. */
-+ dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1];
-+ /** Array of OUT EPs. */
-+ dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1];
-+ /** number of valid EPs in the above array. */
-+// unsigned num_eps : 4;
-+ spinlock_t lock;
-+ /** Timer for SRP. If it expires before SRP is successful
-+ * clear the SRP. */
-+ struct timer_list srp_timer;
-+
-+ /** Tasklet to defer starting of TEST mode transmissions until
-+ * Status Phase has been completed.
-+ */
-+ struct tasklet_struct test_mode_tasklet;
-+
-+ /** Tasklet to delay starting of xfer in DMA mode */
-+ struct tasklet_struct *start_xfer_tasklet;
-+
-+ /** The test mode to enter when the tasklet is executed. */
-+ unsigned test_mode;
-+
-+} dwc_otg_pcd_t;
-+
-+
-+/** DWC_otg request structure.
-+ * This structure is a list of requests.
-+ */
-+typedef struct
-+{
-+ struct usb_request req; /**< USB Request. */
-+ struct list_head queue; /**< queue of these requests. */
-+} dwc_otg_pcd_request_t;
-+
-+
-+extern int dwc_otg_pcd_init(struct device *dev);
-+
-+//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev );
-+extern void dwc_otg_pcd_remove( struct device *dev);
-+extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd );
-+extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd );
-+
-+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd);
-+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set);
-+
-+extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req);
-+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req,
-+ int status);
-+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep);
-+extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd,
-+ const unsigned reset);
-+
-+#endif
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
-@@ -0,0 +1,3654 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1115682 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+
-+
-+#define DEBUG_EP0
-+
-+/* request functions defined in "dwc_otg_pcd.c" */
-+
-+/** @file
-+ * This file contains the implementation of the PCD Interrupt handlers.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ * All interrupt registers are processed from LSB to MSB.
-+ */
-+
-+
-+/**
-+ * This function prints the ep0 state for debug purposes.
-+ */
-+static inline void print_ep0_state(dwc_otg_pcd_t *pcd)
-+{
-+#ifdef DEBUG
-+ char str[40];
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ strcpy(str, "EP0_DISCONNECT");
-+ break;
-+ case EP0_IDLE:
-+ strcpy(str, "EP0_IDLE");
-+ break;
-+ case EP0_IN_DATA_PHASE:
-+ strcpy(str, "EP0_IN_DATA_PHASE");
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+ strcpy(str, "EP0_OUT_DATA_PHASE");
-+ break;
-+ case EP0_IN_STATUS_PHASE:
-+ strcpy(str,"EP0_IN_STATUS_PHASE");
-+ break;
-+ case EP0_OUT_STATUS_PHASE:
-+ strcpy(str,"EP0_OUT_STATUS_PHASE");
-+ break;
-+ case EP0_STALL:
-+ strcpy(str,"EP0_STALL");
-+ break;
-+ default:
-+ strcpy(str,"EP0_INVALID");
-+ }
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
-+#endif
-+}
-+
-+/**
-+ * This function returns pointer to in ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ if(ep_num == 0) {
-+ return &pcd->ep0;
-+ }
-+ else {
-+ for(i = 0; i < num_in_eps; ++i)
-+ {
-+ if(pcd->in_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->in_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+/**
-+ * This function returns pointer to out ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+ if(ep_num == 0) {
-+ return &pcd->ep0;
-+ }
-+ else {
-+ for(i = 0; i < num_out_eps; ++i)
-+ {
-+ if(pcd->out_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->out_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+/**
-+ * This functions gets a pointer to an EP from the wIndex address
-+ * value of the control request.
-+ */
-+static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+ return &pcd->ep0;
-+ list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list)
-+ {
-+ u8 bEndpointAddress;
-+
-+ if (!ep->desc)
-+ continue;
-+
-+ bEndpointAddress = ep->desc->bEndpointAddress;
-+ if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))
-+ == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)))
-+ return ep;
-+ }
-+ return NULL;
-+}
-+
-+/**
-+ * This function checks the EP request queue, if the queue is not
-+ * empty the next request is started.
-+ */
-+void start_next_request(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_pcd_request_t *req = 0;
-+ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-+
-+ if (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next,
-+ dwc_otg_pcd_request_t, queue);
-+
-+ /* Setup and start the Transfer */
-+ ep->dwc_ep.dma_addr = req->req.dma;
-+ ep->dwc_ep.start_xfer_buff = req->req.buf;
-+ ep->dwc_ep.xfer_buff = req->req.buf;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = req->req.length;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+
-+ if(max_transfer > MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
-+ } else {
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ }
-+
-+ if(req->req.zero) {
-+ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-+ }
-+}
-+
-+/**
-+ * This function handles the SOF Interrupts. At this time the SOF
-+ * Interrupt is disabled.
-+ */
-+int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_PCD, "SOF\n");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sofintr = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function handles the Rx Status Queue Level Interrupt, which
-+ * indicates that there is a least one packet in the Rx FIFO. The
-+ * packets are moved from the FIFO to memory, where they will be
-+ * processed when the Endpoint Interrupt Register indicates Transfer
-+ * Complete or SETUP Phase Done.
-+ *
-+ * Repeat the following until the Rx Status Queue is empty:
-+ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
-+ * info
-+ * -# If Receive FIFO is empty then skip to step Clear the interrupt
-+ * and exit
-+ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
-+ * SETUP data to the buffer
-+ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data
-+ * to the destination buffer
-+ */
-+int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t gintmask = {.d32=0};
-+ device_grxsts_data_t status;
-+ dwc_otg_pcd_ep_t *ep;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" };
-+#endif
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
-+ /* Disable the Rx Status Queue Level interrupt */
-+ gintmask.b.rxstsqlvl= 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0);
-+
-+ /* Get the Status from the top of the FIFO */
-+ status.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
-+ "pktsts:%x Frame:%d(0x%0x)\n",
-+ status.b.epnum, status.b.bcnt,
-+ dpid_str[status.b.dpid],
-+ status.b.pktsts, status.b.fn, status.b.fn);
-+ /* Get pointer to EP structure */
-+ ep = get_out_ep(pcd, status.b.epnum);
-+
-+ switch (status.b.pktsts) {
-+ case DWC_DSTS_GOUT_NAK:
-+ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
-+ break;
-+ case DWC_STS_DATA_UPDT:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
-+ if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
-+ /** @todo NGS Check for buffer overflow? */
-+ dwc_otg_read_packet(core_if,
-+ ep->dwc_ep.xfer_buff,
-+ status.b.bcnt);
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ ep->dwc_ep.xfer_buff += status.b.bcnt;
-+ }
-+ break;
-+ case DWC_STS_XFER_COMP:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
-+ break;
-+ case DWC_DSTS_SETUP_COMP:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
-+#endif
-+ break;
-+case DWC_DSTS_SETUP_UPDT:
-+ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
-+ pcd->setup_pkt->req.bRequestType,
-+ pcd->setup_pkt->req.bRequest,
-+ pcd->setup_pkt->req.wValue,
-+ pcd->setup_pkt->req.wIndex,
-+ pcd->setup_pkt->req.wLength);
-+#endif
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ break;
-+ default:
-+ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
-+ status.b.pktsts);
-+ break;
-+ }
-+
-+ /* Enable the Rx Status Queue Level interrupt */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32);
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
-+ return 1;
-+}
-+/**
-+ * This function examines the Device IN Token Learning Queue to
-+ * determine the EP number of the last IN token received. This
-+ * implementation is for the Mass Storage device where there are only
-+ * 2 IN EPs (Control-IN and BULK-IN).
-+ *
-+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
-+ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ *
-+ */
-+static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if)
-+{
-+ dwc_otg_device_global_regs_t *dev_global_regs =
-+ core_if->dev_if->dev_global_regs;
-+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
-+ /* Number of Token Queue Registers */
-+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
-+ dtknq1_data_t dtknqr1;
-+ uint32_t in_tkn_epnums[4];
-+ int ndx = 0;
-+ int i = 0;
-+ volatile uint32_t *addr = &dev_global_regs->dtknqr1;
-+ int epnum = 0;
-+
-+ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-+
-+
-+ /* Read the DTKNQ Registers */
-+ for (i = 0; i < DTKNQ_REG_CNT; i++)
-+ {
-+ in_tkn_epnums[ i ] = dwc_read_reg32(addr);
-+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1,
-+ in_tkn_epnums[i]);
-+ if (addr == &dev_global_regs->dvbusdis) {
-+ addr = &dev_global_regs->dtknqr3_dthrctl;
-+ }
-+ else {
-+ ++addr;
-+ }
-+
-+ }
-+
-+ /* Copy the DTKNQR1 data to the bit field. */
-+ dtknqr1.d32 = in_tkn_epnums[0];
-+ /* Get the EP numbers */
-+ in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
-+ ndx = dtknqr1.b.intknwptr - 1;
-+
-+ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
-+ if (ndx == -1) {
-+ /** @todo Find a simpler way to calculate the max
-+ * queue position.*/
-+ int cnt = TOKEN_Q_DEPTH;
-+ if (TOKEN_Q_DEPTH <= 6) {
-+ cnt = TOKEN_Q_DEPTH - 1;
-+ }
-+ else if (TOKEN_Q_DEPTH <= 14) {
-+ cnt = TOKEN_Q_DEPTH - 7;
-+ }
-+ else if (TOKEN_Q_DEPTH <= 22) {
-+ cnt = TOKEN_Q_DEPTH - 15;
-+ }
-+ else {
-+ cnt = TOKEN_Q_DEPTH - 23;
-+ }
-+ epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF;
-+ }
-+ else {
-+ if (ndx <= 5) {
-+ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 13) {
-+ ndx -= 6;
-+ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 21) {
-+ ndx -= 14;
-+ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
-+ }
-+ else if (ndx <= 29) {
-+ ndx -= 22;
-+ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
-+ }
-+ }
-+ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
-+ return epnum;
-+}
-+
-+/**
-+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
-+ * The active request is checked for the next packet to be loaded into
-+ * the non-periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ gnptxsts_data_t txstatus = {.d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ int epnum = 0;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ /* Get the epnum from the IN Token Learning Queue. */
-+ epnum = get_ep_of_last_in_token(core_if);
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+ dwords = (len + 3)/4;
-+
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32);
-+
-+ while (txstatus.b.nptxqspcavail > 0 &&
-+ txstatus.b.nptxfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxsts));
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.nptxfempty = 1;
-+ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
-+ * The active request is checked for the next packet to be loaded into
-+ * apropriate Tx FIFO.
-+ */
-+static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t* dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0};
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum);
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
-+ ep->dwc_ep.xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3)/4;
-+ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function is called when the Device is disconnected. It stops
-+ * any active requests and informs the Gadget driver of the
-+ * disconnect.
-+ */
-+void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd)
-+{
-+ int i, num_in_eps, num_out_eps;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
-+ /* don't disconnect drivers more than once */
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
-+ return;
-+ }
-+ pcd->ep0state = EP0_DISCONNECT;
-+
-+ /* Reset the OTG state. */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Disable the NP Tx Fifo Empty Interrupt. */
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Flush the FIFOs */
-+ /**@todo NGS Flush Periodic FIFOs */
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
-+ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ ep = &pcd->ep0;
-+ dwc_otg_request_nuke(ep);
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_in_eps; i++)
-+ {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_out_eps; i++)
-+ {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (pcd->driver && pcd->driver->disconnect) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ pcd->driver->disconnect(&pcd->gadget);
-+ SPIN_LOCK(&pcd->lock);
-+ }
-+}
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr");
-+ intr_mask.b.i2cintr = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.i2cintr = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintsts_data_t gintsts;
-+#if defined(VERBOSE)
-+ DWC_PRINT("Early Suspend Detected\n");
-+#endif
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.erlysuspend = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This function configures EPO to receive SETUP packets.
-+ *
-+ * @todo NGS: Update the comments from the HW FS.
-+ *
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param pcd Programming view of the PCD.
-+ */
-+static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz0_data_t doeptsize0 = { .d32 = 0};
-+ dwc_otg_dma_desc_t* dma_desc;
-+ depctl_data_t doepctl = { .d32 = 0 };
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__,
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+#endif
-+
-+ doeptsize0.b.supcnt = 3;
-+ doeptsize0.b.pktcnt = 1;
-+ doeptsize0.b.xfersize = 8*3;
-+
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+
-+ /** @todo dma needs to handle multiple setup packets (up to 3) */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma,
-+ pcd->setup_pkt_dma_handle);
-+ } else {
-+ dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1;
-+ dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index];
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
-+ dma_desc->buf = pcd->setup_pkt_dma_handle;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]);
-+ }
-+
-+ } else {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+ }
-+
-+ /** DOEPCTL0 Register write */
-+ doepctl.b.epena = 1;
-+ doepctl.b.cnak = 1;
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+}
-+
-+
-+/**
-+ * This interrupt occurs when a USB Reset is detected. When the USB
-+ * Reset Interrupt occurs the device state is set to DEFAULT and the
-+ * EP0 state is set to IDLE.
-+ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
-+ * -# Unmask the following interrupt bits
-+ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
-+ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
-+ * - DOEPMSK.SETUP = 1
-+ * - DOEPMSK.XferCompl = 1
-+ * - DIEPMSK.XferCompl = 1
-+ * - DIEPMSK.TimeOut = 1
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ * At this point, all the required initialization, except for enabling
-+ * the control 0 OUT endpoint is done, for receiving SETUP packets.
-+ */
-+int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t doepctl = { .d32 = 0};
-+
-+ daint_data_t daintmsk = { .d32 = 0};
-+ doepmsk_data_t doepmsk = { .d32 = 0};
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+
-+ dcfg_data_t dcfg = { .d32=0 };
-+ grstctl_t resetctl = { .d32=0 };
-+ dctl_data_t dctl = {.d32=0};
-+ int i = 0;
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("USB RESET\n");
-+#ifdef DWC_EN_ISOC
-+ for(i = 1;i < 16; ++i)
-+ {
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ ep = get_in_ep(pcd,i);
-+ if(ep != 0){
-+ dwc_ep = &ep->dwc_ep;
-+ dwc_ep->next_frame = 0xffffffff;
-+ }
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ /* reset the HNP settings */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+
-+ /* Set NAK for all OUT EPs */
-+ doepctl.b.snak = 1;
-+ for (i=0; i <= dev_if->num_out_eps; i++)
-+ {
-+ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl,
-+ doepctl.d32);
-+ }
-+
-+ /* Flush the NP Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10);
-+ /* Flush the Learning Queue */
-+ resetctl.b.intknqflsh = 1;
-+ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ if(core_if->multiproc_int_enable) {
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.stsphsercvd = 1;
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+
-+ if(core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+/*
-+ if(core_if->dma_enable) {
-+ diepmsk.b.nak = 1;
-+ }
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32);
-+ } else{
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ doepmsk.b.stsphsercvd = 1;
-+ doepmsk.b.bna = 1;
-+ }
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+ doepmsk.b.nak = 1;
-+*/
-+ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+
-+ if(core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+
-+// diepmsk.b.nak = 1;
-+
-+ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
-+ }
-+
-+ /* Reset Device Address */
-+ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devaddr = 0;
-+ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* setup EP0 to receive SETUP packets */
-+ ep0_out_start(core_if, pcd);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbreset = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Get the device speed from the device status register and convert it
-+ * to USB speed constant.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static int get_device_speed(dwc_otg_core_if_t *core_if)
-+{
-+ dsts_data_t dsts;
-+ enum usb_device_speed speed = USB_SPEED_UNKNOWN;
-+ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ speed = USB_SPEED_HIGH;
-+ break;
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ speed = USB_SPEED_FULL;
-+ break;
-+
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ speed = USB_SPEED_LOW;
-+ break;
-+ }
-+
-+ return speed;
-+}
-+
-+/**
-+ * Read the device status register and set the device speed in the
-+ * data structure.
-+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
-+ */
-+int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ gintsts_data_t gintsts;
-+ gusbcfg_data_t gusbcfg;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ GET_CORE_IF(pcd)->core_global_regs;
-+ uint8_t utmi16b, utmi8b;
-+ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
-+
-+ if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) {
-+ utmi16b = 6;
-+ utmi8b = 9;
-+ } else {
-+ utmi16b = 4;
-+ utmi8b = 8;
-+ }
-+ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ pcd->ep0state = EP0_IDLE;
-+ }
-+ else if (pcd->ep0state == EP0_STALL) {
-+ pcd->ep0state = EP0_IDLE;
-+ }
-+
-+ pcd->ep0state = EP0_IDLE;
-+
-+ ep0->stopped = 0;
-+
-+ pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd));
-+
-+ /* Set USB turnaround time based on device speed and PHY interface. */
-+ gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ if (pcd->gadget.speed == USB_SPEED_HIGH) {
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ else {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
-+ /* UTMI+ OR ULPI interface */
-+ if (gusbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ else {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ else {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ }
-+ }
-+ }
-+ else {
-+ /* Full or low speed */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.enumdone = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the ISO OUT Packet was dropped due to
-+ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs
-+ * read all the data from the Rx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "ISOC Out Dropped");
-+
-+ intr_mask.b.isooutdrop = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.isooutdrop = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates the end of the portion of the micro-frame
-+ * for periodic transactions. If there is a periodic transaction for
-+ * the next frame, load the packets into the EP periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP");
-+
-+ intr_mask.b.eopframe = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.eopframe = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that EP of the packet on the top of the
-+ * non-periodic Tx FIFO does not match EP of the IN Token received.
-+ *
-+ * The "Device IN Token Queue" Registers are read to determine the
-+ * order the IN Tokens have been received. The non-periodic Tx FIFO
-+ * is flushed, so it can be reloaded in the order seen in the IN Token
-+ * Queue.
-+ */
-+int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.epmismatch = 1;
-+ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This funcion stalls EP0.
-+ */
-+static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req;
-+ DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
-+ ctrl->bRequestType, ctrl->bRequest, err_val);
-+
-+ ep0->dwc_ep.is_in = 1;
-+ dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep);
-+ pcd->ep0.stopped = 1;
-+ pcd->ep0state = EP0_IDLE;
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This functions delegates the setup command to the gadget driver.
-+ */
-+static inline void do_gadget_setup(dwc_otg_pcd_t *pcd,
-+ struct usb_ctrlrequest * ctrl)
-+{
-+ int ret = 0;
-+ if (pcd->driver && pcd->driver->setup) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ ret = pcd->driver->setup(&pcd->gadget, ctrl);
-+ SPIN_LOCK(&pcd->lock);
-+ if (ret < 0) {
-+ ep0_do_stall(pcd, ret);
-+ }
-+
-+ /** @todo This is a g_file_storage gadget driver specific
-+ * workaround: a DELAYED_STATUS result from the fsg_setup
-+ * routine will result in the gadget queueing a EP0 IN status
-+ * phase for a two-stage control transfer. Exactly the same as
-+ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
-+ * specific request. Need a generic way to know when the gadget
-+ * driver will queue the status phase. Can we assume when we
-+ * call the gadget driver setup() function that it will always
-+ * queue and require the following flag? Need to look into
-+ * this.
-+ */
-+
-+ if (ret == 256 + 999) {
-+ pcd->request_config = 1;
-+ }
-+ }
-+}
-+
-+/**
-+ * This function starts the Zero-Length Packet for the IN status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ return;
-+ }
-+
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+
-+ /* Prepare for more SETUP Packets */
-+ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 1;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This function starts the Zero-Length Packet for the OUT status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
-+ return;
-+ }
-+ pcd->ep0state = EP0_OUT_STATUS_PHASE;
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 0;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+ if(GET_CORE_IF(pcd)->dma_enable == 0) {
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+ }
-+}
-+
-+/**
-+ * Clear the EP halt (STALL) and if pending requests start the
-+ * transfer.
-+ */
-+static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep)
-+{
-+ if(ep->dwc_ep.stall_clear_flag == 0)
-+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+
-+ /* Reactive the EP */
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ if (ep->stopped) {
-+ ep->stopped = 0;
-+ /* If there is a request in the EP queue start it */
-+
-+ /** @todo FIXME: this causes an EP mismatch in DMA mode.
-+ * epmismatch not yet implemented. */
-+
-+ /*
-+ * Above fixme is solved by implmenting a tasklet to call the
-+ * start_next_request(), outside of interrupt context at some
-+ * time after the current time, after a clear-halt setup packet.
-+ * Still need to implement ep mismatch in the future if a gadget
-+ * ever uses more than one endpoint at once
-+ */
-+ ep->queue_sof = 1;
-+ tasklet_schedule (pcd->start_xfer_tasklet);
-+ }
-+ /* Start Control Status Phase */
-+ do_setup_in_status_phase(pcd);
-+}
-+
-+/**
-+ * This function is called when the SET_FEATURE TEST_MODE Setup packet
-+ * is sent from the host. The Device Control register is written with
-+ * the Test Mode bits set to the specified Test Mode. This is done as
-+ * a tasklet so that the "Status" phase of the control transfer
-+ * completes before transmitting the TEST packets.
-+ *
-+ * @todo This has not been tested since the tasklet struct was put
-+ * into the PCD struct!
-+ *
-+ */
-+static void do_test_mode(unsigned long data)
-+{
-+ dctl_data_t dctl;
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ int test_mode = pcd->test_mode;
-+
-+
-+// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
-+
-+ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
-+ switch (test_mode) {
-+ case 1: // TEST_J
-+ dctl.b.tstctl = 1;
-+ break;
-+
-+ case 2: // TEST_K
-+ dctl.b.tstctl = 2;
-+ break;
-+
-+ case 3: // TEST_SE0_NAK
-+ dctl.b.tstctl = 3;
-+ break;
-+
-+ case 4: // TEST_PACKET
-+ dctl.b.tstctl = 4;
-+ break;
-+
-+ case 5: // TEST_FORCE_ENABLE
-+ dctl.b.tstctl = 5;
-+ break;
-+ }
-+ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+}
-+
-+/**
-+ * This function process the GET_STATUS Setup Commands.
-+ */
-+static inline void do_get_status(dwc_otg_pcd_t *pcd)
-+{
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ uint16_t *status = pcd->status_buf;
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+#endif
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ *status = 0x1; /* Self powered */
-+ *status |= pcd->remote_wakeup_enable << 1;
-+ break;
-+
-+ case USB_RECIP_INTERFACE:
-+ *status = 0;
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0 || ctrl.wLength > 2) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+ /** @todo check for EP stall */
-+ *status = ep->stopped;
-+ break;
-+ }
-+ pcd->ep0_pending = 1;
-+ ep0->dwc_ep.start_xfer_buff = (uint8_t *)status;
-+ ep0->dwc_ep.xfer_buff = (uint8_t *)status;
-+ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
-+ ep0->dwc_ep.xfer_len = 2;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+}
-+/**
-+ * This function process the SET_FEATURE Setup Commands.
-+ */
-+static inline void do_set_feature(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ int32_t otg_cap_param = core_if->core_params->otg_cap;
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+ DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param);
-+
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ switch (ctrl.wValue) {
-+ case USB_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 1;
-+ break;
-+
-+ case USB_DEVICE_TEST_MODE:
-+ /* Setup the Test Mode tasklet to do the Test
-+ * Packet generation after the SETUP Status
-+ * phase has completed. */
-+
-+ /** @todo This has not been tested since the
-+ * tasklet struct was put into the PCD
-+ * struct! */
-+ pcd->test_mode_tasklet.next = 0;
-+ pcd->test_mode_tasklet.state = 0;
-+ atomic_set(&pcd->test_mode_tasklet.count, 0);
-+ pcd->test_mode_tasklet.func = do_test_mode;
-+ pcd->test_mode_tasklet.data = (unsigned long)pcd;
-+ pcd->test_mode = ctrl.wIndex >> 8;
-+ tasklet_schedule(&pcd->test_mode_tasklet);
-+ break;
-+
-+ case USB_DEVICE_B_HNP_ENABLE:
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
-+
-+ /* dev may initiate HNP */
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->b_hnp_enable = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
-+ /**@todo Is the gotgctl.devhnpen cleared
-+ * by a USB Reset? */
-+ gotgctl.b.devhnpen = 1;
-+ gotgctl.b.hnpreq = 1;
-+ dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+
-+ case USB_DEVICE_A_HNP_SUPPORT:
-+ /* RH port supports HNP */
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+
-+ case USB_DEVICE_A_ALT_HNP_SUPPORT:
-+ /* other RH port does */
-+ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_alt_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ }
-+ else {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ }
-+ break;
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case USB_RECIP_INTERFACE:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ if (ctrl.wValue == USB_ENDPOINT_HALT) {
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the CLEAR_FEATURE Setup Commands.
-+ */
-+static inline void do_clear_feature(dwc_otg_pcd_t *pcd)
-+{
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+
-+ switch (ctrl.bRequestType & USB_RECIP_MASK) {
-+ case USB_RECIP_DEVICE:
-+ switch (ctrl.wValue) {
-+ case USB_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 0;
-+ break;
-+
-+ case USB_DEVICE_TEST_MODE:
-+ /** @todo Add CLEAR_FEATURE for TEST modes. */
-+ break;
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case USB_RECIP_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, ctrl.wIndex);
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -EOPNOTSUPP);
-+ return;
-+ }
-+
-+ pcd_clear_halt(pcd, ep);
-+
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the SET_ADDRESS Setup Commands.
-+ */
-+static inline void do_set_address(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+
-+ if (ctrl.bRequestType == USB_RECIP_DEVICE) {
-+ dcfg_data_t dcfg = {.d32=0};
-+
-+#ifdef DEBUG_EP0
-+// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
-+#endif
-+ dcfg.b.devaddr = ctrl.wValue;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
-+ do_setup_in_status_phase(pcd);
-+ }
-+}
-+
-+/**
-+ * This function processes SETUP commands. In Linux, the USB Command
-+ * processing is done in two places - the first being the PCD and the
-+ * second in the Gadget Driver (for example, the File-Backed Storage
-+ * Gadget Driver).
-+ *
-+ * <table>
-+ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr>
-+ *
-+ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
-+ * defined in chapter 9 of the USB 2.0 Specification chapter 9
-+ * </td></tr>
-+ *
-+ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are the ENDPOINT_HALT feature is procesed, all others the
-+ * interface requests are ignored.</td></tr>
-+ *
-+ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are processed by the PCD. Interface requests are passed
-+ * to the Gadget Driver.</td></tr>
-+ *
-+ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
-+ * with device address received </td></tr>
-+ *
-+ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
-+ * requested descriptor</td></tr>
-+ *
-+ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
-+ * not implemented by any of the existing Gadget Drivers.</td></tr>
-+ *
-+ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
-+ * all EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
-+ * the current configuration</td></tr>
-+ *
-+ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
-+ * EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
-+ * current interface.</td></tr>
-+ *
-+ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
-+ * message.</td></tr>
-+ * </table>
-+ *
-+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
-+ * processed by pcd_setup. Calling the Function Driver's setup function from
-+ * pcd_setup processes the gadget SETUP commands.
-+ */
-+static inline void pcd_setup(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+
-+ deptsiz0_data_t doeptsize0 = { .d32 = 0};
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+#endif
-+
-+ doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz);
-+
-+ /** @todo handle > 1 setup packet , assert error for now */
-+
-+ if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) {
-+ DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
-+ }
-+
-+ /* Clean up the request queue */
-+ dwc_otg_request_nuke(ep0);
-+ ep0->stopped = 0;
-+
-+ if (ctrl.bRequestType & USB_DIR_IN) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_DATA_PHASE;
-+ }
-+ else {
-+ ep0->dwc_ep.is_in = 0;
-+ pcd->ep0state = EP0_OUT_DATA_PHASE;
-+ }
-+
-+ if(ctrl.wLength == 0) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+
-+ if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
-+ /* handle non-standard (class/vendor) requests in the gadget driver */
-+ do_gadget_setup(pcd, &ctrl);
-+ return;
-+ }
-+
-+ /** @todo NGS: Handle bad setup packet? */
-+
-+///////////////////////////////////////////
-+//// --- Standard Request handling --- ////
-+
-+ switch (ctrl.bRequest) {
-+ case USB_REQ_GET_STATUS:
-+ do_get_status(pcd);
-+ break;
-+
-+ case USB_REQ_CLEAR_FEATURE:
-+ do_clear_feature(pcd);
-+ break;
-+
-+ case USB_REQ_SET_FEATURE:
-+ do_set_feature(pcd);
-+ break;
-+
-+ case USB_REQ_SET_ADDRESS:
-+ do_set_address(pcd);
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ case USB_REQ_SET_CONFIGURATION:
-+// _pcd->request_config = 1; /* Configuration changed */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case USB_REQ_SYNCH_FRAME:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ default:
-+ /* Call the Gadget Driver's setup functions */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function completes the ep0 control transfer.
-+ */
-+static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+#ifdef DEBUG_EP0
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+#endif
-+ deptsiz0_data_t deptsiz;
-+ desc_sts_data_t desc_sts;
-+ dwc_otg_pcd_request_t *req;
-+ int is_last = 0;
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name);
-+
-+ if (pcd->ep0_pending && list_empty(&ep->queue)) {
-+ if (ep->dwc_ep.is_in) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
-+#endif
-+ do_setup_out_status_phase(pcd);
-+ }
-+ else {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
-+#endif
-+ do_setup_in_status_phase(pcd);
-+ }
-+ pcd->ep0_pending = 0;
-+ return 1;
-+ }
-+
-+ if (list_empty(&ep->queue)) {
-+ return 0;
-+ }
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue);
-+
-+
-+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ is_last = 1;
-+ }
-+ else if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-+ if(core_if->dma_desc_enable != 0)
-+ desc_sts.d32 = readl(dev_if->in_desc_addr);
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+#endif
-+
-+ if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) ||
-+ ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) {
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+ /* Is a Zero Len Packet needed? */
-+ if (req->req.zero) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
-+#endif
-+ req->req.zero = 0;
-+ }
-+ do_setup_out_status_phase(pcd);
-+ }
-+ }
-+ else {
-+ /* ep0-OUT */
-+#ifdef DEBUG_EP0
-+ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+#endif
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+ /* Is a Zero Len Packet needed? */
-+ if (req->req.zero) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
-+#endif
-+ req->req.zero = 0;
-+ }
-+ if(core_if->dma_desc_enable == 0)
-+ do_setup_in_status_phase(pcd);
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+ dwc_otg_request_done(ep, req, 0);
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * This function completes the request for the EP. If there are
-+ * additional requests for the EP in the queue they will be started.
-+ */
-+static void complete_ep(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+ deptsiz_data_t deptsiz;
-+ desc_sts_data_t desc_sts;
-+ dwc_otg_pcd_request_t *req = 0;
-+ dwc_otg_dma_desc_t* dma_desc;
-+ uint32_t byte_count = 0;
-+ int is_last = 0;
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name,
-+ (ep->dwc_ep.is_in?"IN":"OUT"));
-+
-+ /* Get any pending requests */
-+ if (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
-+ queue);
-+ if (!req) {
-+ printk("complete_ep 0x%p, req = NULL!\n", ep);
-+ return;
-+ }
-+ }
-+ else {
-+ printk("complete_ep 0x%p, ep->queue empty!\n", ep);
-+ return;
-+ }
-+ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
-+
-+ if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz);
-+
-+ if (core_if->dma_enable) {
-+ if(core_if->dma_desc_enable == 0) {
-+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-+ byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ } else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ } else {
-+ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-+ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+ } else {
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+
-+ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-+ desc_sts.d32 = readl(dma_desc);
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+
-+ if(byte_count == 0) {
-+ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len;
-+ is_last = 1;
-+ } else {
-+ DWC_WARN("Incomplete transfer\n");
-+ }
-+ }
-+ } else {
-+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->ep.name, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ } else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+ else {
-+ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n",
-+ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"),
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+ }
-+ } else {
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+ desc_sts.d32 = 0;
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable) {
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) {
-+ desc_sts.d32 = readl(dma_desc);
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+
-+ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len
-+ - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3);
-+ is_last = 1;
-+ } else {
-+ deptsiz.d32 = 0;
-+ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz);
-+
-+ byte_count = (ep->dwc_ep.xfer_len -
-+ ep->dwc_ep.xfer_count - deptsiz.b.xfersize);
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+ } else {
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ else if(ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+
-+#ifdef DEBUG
-+
-+ DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n",
-+ &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len,
-+ ep->dwc_ep.xfer_count,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+#endif
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+ req->req.actual = ep->dwc_ep.xfer_count;
-+
-+ dwc_otg_request_done(ep, req, 0);
-+
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+
-+ /* If there is a request in the queue start it.*/
-+ start_next_request(ep);
-+ }
-+}
-+
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function BNA interrupt for Isochronous EPs
-+ *
-+ */
-+static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ volatile uint32_t *addr;
-+ depctl_data_t depctl = {.d32 = 0};
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+ dwc_otg_dma_desc_t *dma_desc;
-+ int i;
-+
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
-+
-+ if(dwc_ep->is_in) {
-+ desc_sts_data_t sts = {.d32 = 0};
-+ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ writel(sts.d32,&dma_desc->status);
-+ }
-+ }
-+ else {
-+ desc_sts_data_t sts = {.d32 = 0};
-+ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ writel(sts.d32,&dma_desc->status);
-+ }
-+ }
-+
-+ if(dwc_ep->is_in == 0){
-+ addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ }
-+ else{
-+ addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+ depctl.b.epena = 1;
-+ dwc_modify_reg32(addr,depctl.d32,depctl.d32);
-+}
-+
-+/**
-+ * This function sets latest iso packet information(non-PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ dma_addr_t dma_addr;
-+ uint32_t offset;
-+
-+ if(ep->proc_buf_num)
-+ dma_addr = ep->dma_addr1;
-+ else
-+ dma_addr = ep->dma_addr0;
-+
-+
-+ if(ep->is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-+ offset = ep->data_per_frame;
-+ } else {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-+ offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
-+ }
-+
-+ if(!deptsiz.b.xfersize) {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = 0;
-+ } else {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = -ENODATA;
-+ }
-+ ep->cur_pkt_addr += offset;
-+ ep->cur_pkt_dma_addr += offset;
-+ ep->cur_pkt++;
-+}
-+
-+/**
-+ * This function sets latest iso packet information(DDMA mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ dwc_otg_dma_desc_t* dma_desc;
-+ desc_sts_data_t sts = {.d32 = 0};
-+ iso_pkt_info_t *iso_packet;
-+ uint32_t data_per_desc;
-+ uint32_t offset;
-+ int i, j;
-+
-+ iso_packet = dwc_ep->pkt_info;
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+ offset = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Received data length */
-+ if(!sts.b_iso_out.rxbytes){
-+ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes +
-+ (4 - dwc_ep->data_per_frame % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ dma_desc ++;
-+ iso_packet ++;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Received data length */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ iso_packet++;
-+ dma_desc++;
-+ }
-+
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE);
-+ if(iso_packet->status) {
-+ iso_packet->status = -ENODATA;
-+ }
-+ /* Received data length */
-+ if(!sts.b_iso_out.rxbytes){
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
-+ (4 - dwc_ep->data_per_frame % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+ }
-+ else /** ISO IN EP */
-+ {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ sts.d32 = readl(&dma_desc->status);
-+
-+ /* Write status in iso packet descriptor */
-+ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-+ if(iso_packet->status != 0) {
-+ iso_packet->status = -ENODATA;
-+
-+ }
-+ /* Bytes has been transfered */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+
-+ dma_desc ++;
-+ iso_packet++;
-+ }
-+
-+ sts.d32 = readl(&dma_desc->status);
-+ while(sts.b_iso_in.bs == BS_DMA_BUSY) {
-+ sts.d32 = readl(&dma_desc->status);
-+ }
-+
-+ /* Write status in iso packet descriptor ??? do be done with ERROR codes*/
-+ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE);
-+ if(iso_packet->status != 0) {
-+ iso_packet->status = -ENODATA;
-+ }
-+
-+ /* Bytes has been transfered */
-+ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+ }
-+}
-+
-+/**
-+ * This function reinitialize DMA Descriptors for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ int i, j;
-+ dwc_otg_dma_desc_t* dma_desc;
-+ dma_addr_t dma_ad;
-+ volatile uint32_t *addr;
-+ desc_sts_data_t sts = { .d32 =0 };
-+ uint32_t data_per_desc;
-+
-+ if(dwc_ep->is_in == 0) {
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ }
-+ else {
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+
-+
-+ if(dwc_ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+ }
-+ else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr1;
-+ }
-+
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if(dwc_ep->is_in == 0) {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
-+ {
-+ for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
-+ {
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ (uint32_t)dma_ad += data_per_desc;
-+ dma_desc ++;
-+ }
-+ }
-+
-+ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
-+ {
-+
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dma_desc++;
-+ (uint32_t)dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = dwc_ep->proc_buf_num;
-+
-+ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+ }
-+ else /** ISO IN EP */
-+ {
-+ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp = 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+ sts.b_iso_in.framenum = dwc_ep->next_frame;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
-+ {
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ (uint32_t)dma_ad += dwc_ep->data_per_frame;
-+ dma_desc ++;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = dwc_ep->proc_buf_num;
-+
-+ writel((uint32_t)dma_ad, &dma_desc->buf);
-+ writel(sts.d32, &dma_desc->status);
-+
-+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
-+ }
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+}
-+
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ * in case Iso out packet was dropped
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP for wihich transfer complete was asserted
-+ *
-+ */
-+static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
-+{
-+ uint32_t dma_addr;
-+ uint32_t drp_pkt;
-+ uint32_t drp_pkt_cnt;
-+ deptsiz_data_t deptsiz = { .d32 = 0 };
-+ depctl_data_t depctl = { .d32 = 0 };
-+ int i;
-+
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
-+
-+ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
-+ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
-+
-+ /* Setting dropped packets status */
-+ for(i = 0; i < drp_pkt_cnt; ++i) {
-+ dwc_ep->pkt_info[drp_pkt].status = -ENODATA;
-+ drp_pkt ++;
-+ deptsiz.b.pktcnt--;
-+ }
-+
-+
-+ if(deptsiz.b.pktcnt > 0) {
-+ deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket;
-+ } else {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 0;
-+ }
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32);
-+
-+ if(deptsiz.b.pktcnt > 0) {
-+ if(dwc_ep->proc_buf_num) {
-+ dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize;
-+ } else {
-+ dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;;
-+ }
-+
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
-+
-+ /** Re-enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl,
-+ depctl.d32,depctl.d32);
-+ return 0;
-+ } else {
-+ return 1;
-+ }
-+}
-+
-+/**
-+ * This function sets iso packets information(PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
-+{
-+ int i, j;
-+ dma_addr_t dma_ad;
-+ iso_pkt_info_t *packet_info = ep->pkt_info;
-+ uint32_t offset;
-+ uint32_t frame_data;
-+ deptsiz_data_t deptsiz;
-+
-+ if(ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = ep->dma_addr0;
-+ }
-+ else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = ep->dma_addr1;
-+ }
-+
-+
-+ if(ep->is_in) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz);
-+ } else {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz);
-+ }
-+
-+ if(!deptsiz.b.xfersize) {
-+ offset = 0;
-+ for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm)
-+ {
-+ frame_data = ep->data_per_frame;
-+ for(j = 0; j < ep->pkt_per_frm; ++j) {
-+
-+ /* Packet status - is not set as initially
-+ * it is set to 0 and if packet was sent
-+ successfully, status field will remain 0*/
-+
-+
-+ /* Bytes has been transfered */
-+ packet_info->length = (ep->maxpacket < frame_data) ?
-+ ep->maxpacket : frame_data;
-+
-+ /* Received packet offset */
-+ packet_info->offset = offset;
-+ offset += packet_info->length;
-+ frame_data -= packet_info->length;
-+
-+ packet_info ++;
-+ }
-+ }
-+ return 1;
-+ } else {
-+ /* This is a workaround for in case of Transfer Complete with
-+ * PktDrpSts interrupts merging - in this case Transfer complete
-+ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
-+ * set and with DOEPTSIZ register non zero. Investigations showed,
-+ * that this happens when Out packet is dropped, but because of
-+ * interrupts merging during first interrupt handling PktDrpSts
-+ * bit is cleared and for next merged interrupts it is not reset.
-+ * In this case SW hadles the interrupt as if PktDrpSts bit is set.
-+ */
-+ if(ep->is_in) {
-+ return 1;
-+ } else {
-+ return handle_iso_out_pkt_dropped(core_if, ep);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ *
-+ * @param ep The EP for which transfer complete was asserted
-+ *
-+ */
-+static void complete_iso_ep(dwc_otg_pcd_ep_t *ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ uint8_t is_last = 0;
-+
-+ if(core_if->dma_enable) {
-+ if(core_if->dma_desc_enable) {
-+ set_ddma_iso_pkts_info(core_if, dwc_ep);
-+ reinit_ddma_iso_xfer(core_if, dwc_ep);
-+ is_last = 1;
-+ } else {
-+ if(core_if->pti_enh_enable) {
-+ if(set_iso_pkts_info(core_if, dwc_ep)) {
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep);
-+ is_last = 1;
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-+ }
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-+ }
-+ if(is_last)
-+ dwc_otg_iso_buffer_done(ep, ep->iso_req);
-+}
-+
-+#endif //DWC_EN_ISOC
-+
-+
-+/**
-+ * This function handles EP0 Control transfers.
-+ *
-+ * The state of the control tranfers are tracked in
-+ * <code>ep0state</code>.
-+ */
-+static void handle_ep0(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ desc_sts_data_t desc_sts;
-+ deptsiz0_data_t deptsiz;
-+ uint32_t byte_count;
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+ print_ep0_state(pcd);
-+#endif
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ break;
-+
-+ case EP0_IDLE:
-+ pcd->request_config = 0;
-+
-+ pcd_setup(pcd);
-+ break;
-+
-+ case EP0_IN_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+
-+ if (core_if->dma_enable != 0) {
-+ /*
-+ * For EP0 we can only program 1 packet at a time so we
-+ * need to do the make calculations after each complete.
-+ * Call write_packet to make the calculations, as in
-+ * slave mode, and use those values to determine if we
-+ * can complete.
-+ */
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz);
-+ byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
-+ }
-+ else {
-+ desc_sts.d32 = readl(core_if->dev_if->in_desc_addr);
-+ byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
-+ }
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else if(ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+ if (core_if->dma_enable != 0) {
-+ if(core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz);
-+ byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
-+ }
-+ else {
-+ desc_sts.d32 = readl(core_if->dev_if->out_desc_addr);
-+ byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
-+ }
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else if(ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ }
-+ else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+
-+
-+ case EP0_IN_STATUS_PHASE:
-+ case EP0_OUT_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
-+ ep0_complete_request(ep0);
-+ pcd->ep0state = EP0_IDLE;
-+ ep0->stopped = 1;
-+ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */
-+
-+ /* Prepare for more SETUP Packets */
-+ if(core_if->dma_enable) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+ break;
-+
-+ case EP0_STALL:
-+ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
-+ break;
-+ }
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+}
-+
-+
-+/**
-+ * Restart transfer
-+ */
-+static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if;
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+#ifdef DWC_EN_ISOC
-+ if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ return;
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ core_if = GET_CORE_IF(pcd);
-+ dev_if = core_if->dev_if;
-+
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+
-+ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x"
-+ " stopped=%d\n", ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-+ ep->stopped);
-+ /*
-+ * If xfersize is 0 and pktcnt in not 0, resend the last packet.
-+ */
-+ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
-+ ep->dwc_ep.start_xfer_buff != 0) {
-+ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ }
-+ else {
-+ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
-+ /* convert packet size to dwords. */
-+ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ }
-+ ep->stopped = 0;
-+ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x "
-+ "xfer_len=%0x stopped=%d\n",
-+ ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len ,
-+ ep->stopped
-+ );
-+ if (epnum == 0) {
-+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ else {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ }
-+}
-+
-+
-+/**
-+ * handle the IN EP disable interrupt.
-+ */
-+static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ return;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum,
-+ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl));
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt,
-+ dieptsiz.b.xfersize);
-+
-+ if (ep->stopped) {
-+ /* Flush the Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ /* Clear the Global IN NP NAK */
-+ dctl.d32 = 0;
-+ dctl.b.cgnpinnak = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0);
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 ||
-+ dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ }
-+ else {
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 ||
-+ dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
-+ }
-+}
-+
-+/**
-+ * Handler for the IN EP timeout handshake interrupt.
-+ */
-+static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+
-+#ifdef DEBUG
-+ deptsiz_data_t dieptsiz = {.d32=0};
-+ uint32_t num = 0;
-+#endif
-+ dctl_data_t dctl = {.d32=0};
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ /* Disable the NP Tx Fifo Empty Interrrupt */
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ /** @todo NGS Check EP type.
-+ * Implement for Periodic EPs */
-+ /*
-+ * Non-periodic EP
-+ */
-+ /* Enable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
-+ 0, intr_mask.d32);
-+
-+ /* Set Global IN NAK */
-+ dctl.b.sgnpinnak = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl,
-+ dctl.d32, dctl.d32);
-+
-+ ep->stopped = 1;
-+
-+#ifdef DEBUG
-+ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz);
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt,
-+ dieptsiz.b.xfersize);
-+#endif
-+
-+#ifdef DISABLE_PERIODIC_EP
-+ /*
-+ * Set the NAK bit for this EP to
-+ * start the disable process.
-+ */
-+ diepctl.d32 = 0;
-+ diepctl.b.snak = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32);
-+ ep->disabling = 1;
-+ ep->stopped = 1;
-+#endif
-+}
-+
-+/**
-+ * Handler for the IN EP NAK interrupt.
-+ */
-+static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ diepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP Babble interrupt.
-+ */
-+static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.babble = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NAK interrupt.
-+ */
-+static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NYET interrupt.
-+ */
-+static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t* core_if;
-+ doepmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nyet = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum],
-+ intr_mask.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that an IN EP has a pending Interrupt.
-+ * The sequence for handling the IN EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each IN EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DIEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Time-out Handshake" log error
-+ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx
-+ * FIFO.
-+ * -# If "IN Token EP Mismatch" (disable, this is handled by EP
-+ * Mismatch Interrupt)
-+ */
-+static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd)
-+{
-+#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ diepint_data_t diepint = {.d32=0}; \
-+ diepint.b.__intr = 1; \
-+ dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
-+ diepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ diepint_data_t diepint = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ depctl_data_t depctl = {.d32=0};
-+ uint32_t ep_intr;
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
-+
-+ /* Service the Device IN interrupts for each endpoint */
-+ while(ep_intr) {
-+ if (ep_intr&0x1) {
-+ uint32_t empty_msk;
-+ /* Get EP pointer */
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-+ empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n",
-+ epnum,
-+ empty_msk,
-+ depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+
-+ diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
-+
-+ DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32);
-+ /* Transfer complete */
-+ if (diepint.b.xfercompl) {
-+ /* Disable the NP Tx FIFO Empty
-+ * Interrrupt */
-+ if(core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ else {
-+ /* Disable the Tx FIFO Empty Interrupt for this EP */
-+ uint32_t fifoemptymsk = 0x1 << dwc_ep->num;
-+ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ fifoemptymsk, 0);
-+ }
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,xfercompl);
-+
-+ /* Complete the transfer */
-+ if (epnum == 0) {
-+ handle_ep0(pcd);
-+ }
-+#ifdef DWC_EN_ISOC
-+ else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if(!ep->stopped)
-+ complete_iso_ep(ep);
-+ }
-+#endif //DWC_EN_ISOC
-+ else {
-+
-+ complete_ep(ep);
-+ }
-+ }
-+ /* Endpoint disable */
-+ if (diepint.b.epdisabled) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum);
-+ handle_in_ep_disable_intr(pcd, epnum);
-+
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,epdisabled);
-+ }
-+ /* AHB Error */
-+ if (diepint.b.ahberr) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum);
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if,epnum,ahberr);
-+ }
-+ /* TimeOUT Handshake (non-ISOC IN EPs) */
-+ if (diepint.b.timeout) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum);
-+ handle_in_ep_timeout_intr(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,timeout);
-+ }
-+ /** IN Token received with TxF Empty */
-+ if (diepint.b.intktxfemp) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n",
-+ epnum);
-+ if (!ep->stopped && epnum != 0) {
-+
-+ diepmsk_data_t diepmsk = { .d32 = 0};
-+ diepmsk.b.intktxfemp = 1;
-+
-+ if(core_if->multiproc_int_enable) {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum],
-+ diepmsk.d32, 0);
-+ } else {
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0);
-+ }
-+ start_next_request(ep);
-+ }
-+ else if(core_if->dma_desc_enable && epnum == 0 &&
-+ pcd->ep0state == EP0_OUT_STATUS_PHASE) {
-+ // EP0 IN set STALL
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp);
-+ }
-+ /** IN Token Received with EP mismatch */
-+ if (diepint.b.intknepmis) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum);
-+ CLEAR_IN_EP_INTR(core_if,epnum,intknepmis);
-+ }
-+ /** IN Endpoint NAK Effective */
-+ if (diepint.b.inepnakeff) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum);
-+ /* Periodic EP */
-+ if (ep->disabling) {
-+ depctl.d32 = 0;
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff);
-+
-+ }
-+
-+ /** IN EP Tx FIFO Empty Intr */
-+ if (diepint.b.emptyintr) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum);
-+ write_empty_tx_fifo(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,emptyintr);
-+
-+ }
-+
-+ /** IN EP BNA Intr */
-+ if (diepint.b.bna) {
-+ CLEAR_IN_EP_INTR(core_if,epnum,bna);
-+ if(core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if(dwc_ep->next_frame != 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ }
-+ else
-+#endif //DWC_EN_ISOC
-+ {
-+ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-+
-+ /* If Global Continue on BNA is disabled - disable EP */
-+ if(!dctl.b.gcontbna) {
-+ depctl.d32 = 0;
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32);
-+ } else {
-+ start_next_request(ep);
-+ }
-+ }
-+ }
-+ }
-+ /* NAK Interrutp */
-+ if (diepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum);
-+ handle_in_ep_nak_intr(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if,epnum,nak);
-+ }
-+ }
-+ epnum++;
-+ ep_intr >>=1;
-+ }
-+
-+ return 1;
-+#undef CLEAR_IN_EP_INTR
-+}
-+
-+/**
-+ * This interrupt indicates that an OUT EP has a pending Interrupt.
-+ * The sequence for handling the OUT EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each OUT EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DOEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Setup Phase Done" process Setup Packet (See Standard USB
-+ * Command Processing)
-+ */
-+static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd)
-+{
-+#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ doepint_data_t doepint = {.d32=0}; \
-+ doepint.b.__intr = 1; \
-+ dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
-+ doepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ uint32_t ep_intr;
-+ doepint_data_t doepint = {.d32=0};
-+ dctl_data_t dctl = {.d32=0};
-+ depctl_data_t doepctl = {.d32=0};
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
-+
-+ while(ep_intr) {
-+ if (ep_intr&0x1) {
-+ /* Get EP pointer */
-+ ep = get_out_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+#endif
-+ doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
-+
-+ /* Transfer complete */
-+ if (doepint.b.xfercompl) {
-+
-+ if (epnum == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE)
-+ handle_ep0(pcd);
-+#ifdef DWC_EN_ISOC
-+ } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (doepint.b.pktdrpsts == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ complete_iso_ep(ep);
-+ } else {
-+
-+ doepint_data_t doepint = {.d32=0};
-+ doepint.b.xfercompl = 1;
-+ doepint.b.pktdrpsts = 1;
-+ dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint,
-+ doepint.d32);
-+ if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) {
-+ complete_iso_ep(ep);
-+ }
-+ }
-+#endif //DWC_EN_ISOC
-+ } else {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl);
-+ complete_ep(ep);
-+ }
-+
-+ }
-+
-+ /* Endpoint disable */
-+ if (doepint.b.epdisabled) {
-+
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled);
-+ }
-+ /* AHB Error */
-+ if (doepint.b.ahberr) {
-+ DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum);
-+ DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma);
-+ CLEAR_OUT_EP_INTR(core_if,epnum,ahberr);
-+ }
-+ /* Setup Phase Done (contorl EPs) */
-+ if (doepint.b.setup) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n",
-+ epnum);
-+#endif
-+ CLEAR_OUT_EP_INTR(core_if,epnum,setup);
-+
-+ handle_ep0(pcd);
-+ }
-+
-+ /** OUT EP BNA Intr */
-+ if (doepint.b.bna) {
-+ CLEAR_OUT_EP_INTR(core_if,epnum,bna);
-+ if(core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if(dwc_ep->next_frame != 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ }
-+ else
-+#endif //DWC_EN_ISOC
-+ {
-+ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl);
-+
-+ /* If Global Continue on BNA is disabled - disable EP*/
-+ if(!dctl.b.gcontbna) {
-+ doepctl.d32 = 0;
-+ doepctl.b.snak = 1;
-+ doepctl.b.epdis = 1;
-+ dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32);
-+ } else {
-+ start_next_request(ep);
-+ }
-+ }
-+ }
-+ }
-+ if (doepint.b.stsphsercvd) {
-+ CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd);
-+ if(core_if->dma_desc_enable) {
-+ do_setup_in_status_phase(pcd);
-+ }
-+ }
-+ /* Babble Interrutp */
-+ if (doepint.b.babble) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum);
-+ handle_out_ep_babble_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,babble);
-+ }
-+ /* NAK Interrutp */
-+ if (doepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum);
-+ handle_out_ep_nak_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,nak);
-+ }
-+ /* NYET Interrutp */
-+ if (doepint.b.nyet) {
-+ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum);
-+ handle_out_ep_nyet_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if,epnum,nyet);
-+ }
-+ }
-+
-+ epnum++;
-+ ep_intr >>=1;
-+ }
-+
-+ return 1;
-+
-+#undef CLEAR_OUT_EP_INTR
-+}
-+
-+
-+/**
-+ * Incomplete ISO IN Transfer Interrupt.
-+ * This interrupt indicates one of the following conditions occurred
-+ * while transmitting an ISOC transaction.
-+ * - Corrupted IN Token for ISOC EP.
-+ * - Packet not complete in FIFO.
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Disable EP; when "Endpoint Disabled" interrupt is received
-+ * Flush FIFO
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd)
-+{
-+ gintsts_data_t gintsts;
-+
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0};
-+ dsts_data_t dsts = { .d32 = 0};
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for(i = 1; i <= dev_if->num_in_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if(dwc_ep->active &&
-+ dwc_ep->type == USB_ENDPOINT_XFER_ISOC)
-+ {
-+ deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz);
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+
-+ if(depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-+ }
-+ }
-+ }
-+
-+#else
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "IN ISOC Incomplete");
-+
-+ intr_mask.b.incomplisoin = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+#endif //DWC_EN_ISOC
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoin = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Incomplete ISO OUT Transfer Interrupt.
-+ *
-+ * This interrupt indicates that the core has dropped an ISO OUT
-+ * packet. The following conditions can be the cause:
-+ * - FIFO Full, the entire packet would not fit in the FIFO.
-+ * - CRC Error
-+ * - Corrupted Token
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Read any data from the FIFO
-+ * -# Disable EP. when "Endpoint Disabled" interrupt is received
-+ * re-enable EP.
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd)
-+{
-+ /* @todo implement ISR */
-+ gintsts_data_t gintsts;
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = { .d32 = 0};
-+ depctl_data_t depctl = { .d32 = 0};
-+ dsts_data_t dsts = { .d32 = 0};
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for(i = 1; i <= dev_if->num_out_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if(pcd->out_ep[i].dwc_ep.active &&
-+ pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC)
-+ {
-+ deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz);
-+ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-+
-+ if(depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep);
-+ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if(dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep);
-+ }
-+ }
-+ }
-+#else
-+ /** @todo implement ISR */
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "OUT ISOC Incomplete");
-+
-+ intr_mask.b.incomplisoout = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+#endif // DWC_EN_ISOC
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoout = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the Global IN NAK Effective interrupt.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ depctl_data_t diepctl = { .d32 = 0};
-+ depctl_data_t diepctl_rd = { .d32 = 0};
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
-+
-+ /* Disable all active IN EPs */
-+ diepctl.b.epdis = 1;
-+ diepctl.b.snak = 1;
-+
-+ for (i=0; i <= dev_if->num_in_eps; i++)
-+ {
-+ diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (diepctl_rd.b.epena) {
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl,
-+ diepctl.d32);
-+ }
-+ }
-+ /* Disable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.ginnakeff = 1;
-+ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * OUT NAK Effective.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINT("INTERRUPT Handler not implemented for %s\n",
-+ "Global IN NAK Effective\n");
-+ /* Disable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.goutnakeff = 1;
-+ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.goutnakeff = 1;
-+ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * PCD interrupt handler.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ *
-+ * All interrupt registers are processed from LSB to MSB.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+#ifdef VERBOSE
-+ dwc_otg_core_global_regs_t *global_regs =
-+ core_if->core_global_regs;
-+#endif
-+ gintsts_data_t gintr_status;
-+ int32_t retval = 0;
-+
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ dwc_read_reg32(&global_regs->gintsts),
-+ dwc_read_reg32(&global_regs->gintmsk));
-+#endif
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ SPIN_LOCK(&pcd->lock);
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ dwc_read_reg32(&global_regs->gintsts),
-+ dwc_read_reg32(&global_regs->gintmsk));
-+#endif
-+
-+ gintr_status.d32 = dwc_otg_read_core_intr(core_if);
-+
-+/*
-+ if (!gintr_status.d32) {
-+ SPIN_UNLOCK(&pcd->lock);
-+ return 0;
-+ }
-+*/
-+ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
-+ __func__, gintr_status.d32);
-+
-+ if (gintr_status.b.sofintr) {
-+ retval |= dwc_otg_pcd_handle_sof_intr(pcd);
-+ }
-+ if (gintr_status.b.rxstsqlvl) {
-+ retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
-+ }
-+ if (gintr_status.b.nptxfempty) {
-+ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
-+ }
-+ if (gintr_status.b.ginnakeff) {
-+ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.goutnakeff) {
-+ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.i2cintr) {
-+ retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
-+ }
-+ if (gintr_status.b.erlysuspend) {
-+ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
-+ }
-+ if (gintr_status.b.usbreset) {
-+ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
-+ }
-+ if (gintr_status.b.enumdone) {
-+ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
-+ }
-+ if (gintr_status.b.isooutdrop) {
-+ retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd);
-+ }
-+ if (gintr_status.b.eopframe) {
-+ retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
-+ }
-+ if (gintr_status.b.epmismatch) {
-+ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if);
-+ }
-+ if (gintr_status.b.inepint) {
-+ if(!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.outepintr) {
-+ if(!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.incomplisoin) {
-+ retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
-+ }
-+ if (gintr_status.b.incomplisoout) {
-+ retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
-+ }
-+
-+ /* In MPI mode De vice Endpoints intterrupts are asserted
-+ * without setting outepintr and inepint bits set, so these
-+ * Interrupt handlers are called without checking these bit-fields
-+ */
-+ if(core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
-+ dwc_read_reg32(&global_regs->gintsts));
-+#endif
-+ SPIN_UNLOCK(&pcd->lock);
-+ }
-+
-+ S3C2410X_CLEAR_EINTPEND();
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
-@@ -0,0 +1,2075 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:15 $
-+ * $Change: 1099526 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_REGS_H__
-+#define __DWC_OTG_REGS_H__
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the data structures for accessing the DWC_otg core registers.
-+ *
-+ * The application interfaces with the HS OTG core by reading from and
-+ * writing to the Control and Status Register (CSR) space through the
-+ * AHB Slave interface. These registers are 32 bits wide, and the
-+ * addresses are 32-bit-block aligned.
-+ * CSRs are classified as follows:
-+ * - Core Global Registers
-+ * - Device Mode Registers
-+ * - Device Global Registers
-+ * - Device Endpoint Specific Registers
-+ * - Host Mode Registers
-+ * - Host Global Registers
-+ * - Host Port CSRs
-+ * - Host Channel Specific Registers
-+ *
-+ * Only the Core Global registers can be accessed in both Device and
-+ * Host modes. When the HS OTG core is operating in one mode, either
-+ * Device or Host, the application must not access registers from the
-+ * other mode. When the core switches from one mode to another, the
-+ * registers in the new mode of operation must be reprogrammed as they
-+ * would be after a power-on reset.
-+ */
-+
-+/** Maximum number of Periodic FIFOs */
-+#define MAX_PERIO_FIFOS 15
-+/** Maximum number of Transmit FIFOs */
-+#define MAX_TX_FIFOS 15
-+
-+/** Maximum number of Endpoints/HostChannels */
-+#define MAX_EPS_CHANNELS 16
-+
-+/****************************************************************************/
-+/** DWC_otg Core registers .
-+ * The dwc_otg_core_global_regs structure defines the size
-+ * and relative field offsets for the Core Global registers.
-+ */
-+typedef struct dwc_otg_core_global_regs
-+{
-+ /** OTG Control and Status Register. <i>Offset: 000h</i> */
-+ volatile uint32_t gotgctl;
-+ /** OTG Interrupt Register. <i>Offset: 004h</i> */
-+ volatile uint32_t gotgint;
-+ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
-+ volatile uint32_t gahbcfg;
-+
-+#define DWC_GLBINTRMASK 0x0001
-+#define DWC_DMAENABLE 0x0020
-+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-+#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-+
-+ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
-+ volatile uint32_t gusbcfg;
-+ /**Core Reset Register. <i>Offset: 010h</i> */
-+ volatile uint32_t grstctl;
-+ /**Core Interrupt Register. <i>Offset: 014h</i> */
-+ volatile uint32_t gintsts;
-+ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
-+ volatile uint32_t gintmsk;
-+ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
-+ volatile uint32_t grxstsr;
-+ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
-+ volatile uint32_t grxstsp;
-+ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
-+ volatile uint32_t grxfsiz;
-+ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
-+ volatile uint32_t gnptxfsiz;
-+ /**Non Periodic Transmit FIFO/Queue Status Register (Read
-+ * Only). <i>Offset: 02Ch</i> */
-+ volatile uint32_t gnptxsts;
-+ /**I2C Access Register. <i>Offset: 030h</i> */
-+ volatile uint32_t gi2cctl;
-+ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
-+ volatile uint32_t gpvndctl;
-+ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
-+ volatile uint32_t ggpio;
-+ /**User ID Register. <i>Offset: 03Ch</i> */
-+ volatile uint32_t guid;
-+ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
-+ volatile uint32_t gsnpsid;
-+ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
-+ volatile uint32_t ghwcfg1;
-+ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
-+ volatile uint32_t ghwcfg2;
-+#define DWC_SLAVE_ONLY_ARCH 0
-+#define DWC_EXT_DMA_ARCH 1
-+#define DWC_INT_DMA_ARCH 2
-+
-+#define DWC_MODE_HNP_SRP_CAPABLE 0
-+#define DWC_MODE_SRP_ONLY_CAPABLE 1
-+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-+#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
-+ volatile uint32_t ghwcfg3;
-+ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
-+ volatile uint32_t ghwcfg4;
-+ /** Reserved <i>Offset: 054h-0FFh</i> */
-+ volatile uint32_t reserved[43];
-+ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
-+ volatile uint32_t hptxfsiz;
-+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
-+ otherwise Device Transmit FIFO#n Register.
-+ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
-+ volatile uint32_t dptxfsiz_dieptxf[15];
-+} dwc_otg_core_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Control
-+ * and Status Register (GOTGCTL). Set the bits using the bit
-+ * fields then write the <i>d32</i> value to the register.
-+ */
-+typedef union gotgctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned sesreqscs : 1;
-+ unsigned sesreq : 1;
-+ unsigned reserved2_7 : 6;
-+ unsigned hstnegscs : 1;
-+ unsigned hnpreq : 1;
-+ unsigned hstsethnpen : 1;
-+ unsigned devhnpen : 1;
-+ unsigned reserved12_15 : 4;
-+ unsigned conidsts : 1;
-+ unsigned reserved17 : 1;
-+ unsigned asesvld : 1;
-+ unsigned bsesvld : 1;
-+ unsigned currmod : 1;
-+ unsigned reserved21_31 : 11;
-+ } b;
-+} gotgctl_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Interrupt Register
-+ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
-+ * value to the register.
-+ */
-+typedef union gotgint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Current Mode */
-+ unsigned reserved0_1 : 2;
-+
-+ /** Session End Detected */
-+ unsigned sesenddet : 1;
-+
-+ unsigned reserved3_7 : 5;
-+
-+ /** Session Request Success Status Change */
-+ unsigned sesreqsucstschng : 1;
-+ /** Host Negotiation Success Status Change */
-+ unsigned hstnegsucstschng : 1;
-+
-+ unsigned reserver10_16 : 7;
-+
-+ /** Host Negotiation Detected */
-+ unsigned hstnegdet : 1;
-+ /** A-Device Timeout Change */
-+ unsigned adevtoutchng : 1;
-+ /** Debounce Done */
-+ unsigned debdone : 1;
-+
-+ unsigned reserved31_20 : 12;
-+
-+ } b;
-+} gotgint_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core AHB Configuration
-+ * Register (GAHBCFG). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gahbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned glblintrmsk : 1;
-+#define DWC_GAHBCFG_GLBINT_ENABLE 1
-+
-+ unsigned hburstlen : 4;
-+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
-+
-+ unsigned dmaenable : 1;
-+#define DWC_GAHBCFG_DMAENABLE 1
-+ unsigned reserved : 1;
-+ unsigned nptxfemplvl_txfemplvl : 1;
-+ unsigned ptxfemplvl : 1;
-+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
-+ unsigned reserved9_31 : 23;
-+ } b;
-+} gahbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core USB Configuration
-+ * Register (GUSBCFG). Set the bits using the bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union gusbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned toutcal : 3;
-+ unsigned phyif : 1;
-+ unsigned ulpi_utmi_sel : 1;
-+ unsigned fsintf : 1;
-+ unsigned physel : 1;
-+ unsigned ddrsel : 1;
-+ unsigned srpcap : 1;
-+ unsigned hnpcap : 1;
-+ unsigned usbtrdtim : 4;
-+ unsigned nptxfrwnden : 1;
-+ unsigned phylpwrclksel : 1;
-+ unsigned otgutmifssel : 1;
-+ unsigned ulpi_fsls : 1;
-+ unsigned ulpi_auto_res : 1;
-+ unsigned ulpi_clk_sus_m : 1;
-+ unsigned ulpi_ext_vbus_drv : 1;
-+ unsigned ulpi_int_vbus_indicator : 1;
-+ unsigned term_sel_dl_pulse : 1;
-+ unsigned reserved23_27 : 5;
-+ unsigned tx_end_delay : 1;
-+ unsigned reserved29_31 : 3;
-+ } b;
-+} gusbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core Reset Register
-+ * (GRSTCTL). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union grstctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Core Soft Reset (CSftRst) (Device and Host)
-+ *
-+ * The application can flush the control logic in the
-+ * entire core using this bit. This bit resets the
-+ * pipelines in the AHB Clock domain as well as the
-+ * PHY Clock domain.
-+ *
-+ * The state machines are reset to an IDLE state, the
-+ * control bits in the CSRs are cleared, all the
-+ * transmit FIFOs and the receive FIFO are flushed.
-+ *
-+ * The status mask bits that control the generation of
-+ * the interrupt, are cleared, to clear the
-+ * interrupt. The interrupt status bits are not
-+ * cleared, so the application can get the status of
-+ * any events that occurred in the core after it has
-+ * set this bit.
-+ *
-+ * Any transactions on the AHB are terminated as soon
-+ * as possible following the protocol. Any
-+ * transactions on the USB are terminated immediately.
-+ *
-+ * The configuration settings in the CSRs are
-+ * unchanged, so the software doesn't have to
-+ * reprogram these registers (Device
-+ * Configuration/Host Configuration/Core System
-+ * Configuration/Core PHY Configuration).
-+ *
-+ * The application can write to this bit, any time it
-+ * wants to reset the core. This is a self clearing
-+ * bit and the core clears this bit after all the
-+ * necessary logic is reset in the core, which may
-+ * take several clocks, depending on the current state
-+ * of the core.
-+ */
-+ unsigned csftrst : 1;
-+ /** Hclk Soft Reset
-+ *
-+ * The application uses this bit to reset the control logic in
-+ * the AHB clock domain. Only AHB clock domain pipelines are
-+ * reset.
-+ */
-+ unsigned hsftrst : 1;
-+ /** Host Frame Counter Reset (Host Only)<br>
-+ *
-+ * The application can reset the (micro)frame number
-+ * counter inside the core, using this bit. When the
-+ * (micro)frame counter is reset, the subsequent SOF
-+ * sent out by the core, will have a (micro)frame
-+ * number of 0.
-+ */
-+ unsigned hstfrm : 1;
-+ /** In Token Sequence Learning Queue Flush
-+ * (INTknQFlsh) (Device Only)
-+ */
-+ unsigned intknqflsh : 1;
-+ /** RxFIFO Flush (RxFFlsh) (Device and Host)
-+ *
-+ * The application can flush the entire Receive FIFO
-+ * using this bit. <p>The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is reading from the RxFIFO nor the MAC
-+ * is writing the data in to the FIFO. <p>The
-+ * application should wait until the bit is cleared
-+ * before performing any other operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned rxfflsh : 1;
-+ /** TxFIFO Flush (TxFFlsh) (Device and Host).
-+ *
-+ * This bit is used to selectively flush a single or
-+ * all transmit FIFOs. The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is writing into the TxFIFO nor the MAC
-+ * is reading the data out of the FIFO. <p>The
-+ * application should wait until the core clears this
-+ * bit, before performing any operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned txfflsh : 1;
-+
-+ /** TxFIFO Number (TxFNum) (Device and Host).
-+ *
-+ * This is the FIFO number which needs to be flushed,
-+ * using the TxFIFO Flush bit. This field should not
-+ * be changed until the TxFIFO Flush bit is cleared by
-+ * the core.
-+ * - 0x0 : Non Periodic TxFIFO Flush
-+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
-+ * or Periodic TxFIFO in host mode
-+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
-+ * - ...
-+ * - 0xF : Periodic TxFIFO #15 Flush in device mode
-+ * - 0x10: Flush all the Transmit NonPeriodic and
-+ * Transmit Periodic FIFOs in the core
-+ */
-+ unsigned txfnum : 5;
-+ /** Reserved */
-+ unsigned reserved11_29 : 19;
-+ /** DMA Request Signal. Indicated DMA request is in
-+ * probress. Used for debug purpose. */
-+ unsigned dmareq : 1;
-+ /** AHB Master Idle. Indicates the AHB Master State
-+ * Machine is in IDLE condition. */
-+ unsigned ahbidle : 1;
-+ } b;
-+} grstctl_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core Interrupt Mask
-+ * Register (GINTMSK). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned reserved0 : 1;
-+ unsigned modemismatch : 1;
-+ unsigned otgintr : 1;
-+ unsigned sofintr : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned reserved8 : 1;
-+ unsigned i2cintr : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned usbreset : 1;
-+ unsigned enumdone : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned eopframe : 1;
-+ unsigned reserved16 : 1;
-+ unsigned epmismatch : 1;
-+ unsigned inepintr : 1;
-+ unsigned outepintr : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned incomplisoout : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned portintr : 1;
-+ unsigned hcintr : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned reserved27 : 1;
-+ unsigned conidstschng : 1;
-+ unsigned disconnect : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned wkupintr : 1;
-+ } b;
-+} gintmsk_data_t;
-+/**
-+ * This union represents the bit fields of the Core Interrupt Register
-+ * (GINTSTS). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union gintsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+#define DWC_SOF_INTR_MASK 0x0008
-+ /** register bits */
-+ struct
-+ {
-+#define DWC_HOST_MODE 1
-+ unsigned curmode : 1;
-+ unsigned modemismatch : 1;
-+ unsigned otgintr : 1;
-+ unsigned sofintr : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned reserved8 : 1;
-+ unsigned i2cintr : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned usbreset : 1;
-+ unsigned enumdone : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned eopframe : 1;
-+ unsigned intokenrx : 1;
-+ unsigned epmismatch : 1;
-+ unsigned inepint: 1;
-+ unsigned outepintr : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned incomplisoout : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned portintr : 1;
-+ unsigned hcintr : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned reserved27 : 1;
-+ unsigned conidstschng : 1;
-+ unsigned disconnect : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned wkupintr : 1;
-+ } b;
-+} gintsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union device_grxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned epnum : 4;
-+ unsigned bcnt : 11;
-+ unsigned dpid : 2;
-+
-+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+
-+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
-+ unsigned pktsts : 4;
-+ unsigned fn : 4;
-+ unsigned reserved : 7;
-+ } b;
-+} device_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union host_grxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned chnum : 4;
-+ unsigned bcnt : 11;
-+ unsigned dpid : 2;
-+
-+ unsigned pktsts : 4;
-+#define DWC_GRXSTS_PKTSTS_IN 0x2
-+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
-+
-+ unsigned reserved : 11;
-+ } b;
-+} host_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
-+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then
-+ * read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union fifosize_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned startaddr : 16;
-+ unsigned depth : 16;
-+ } b;
-+} fifosize_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Non-Periodic Transmit
-+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union gnptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned nptxfspcavail : 16;
-+ unsigned nptxqspcavail : 8;
-+ /** Top of the Non-Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (Last entry for the selected
-+ * channel/EP)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - IN/OUT
-+ * - 2'b01 - Zero Length OUT
-+ * - 2'b10 - PING/Complete Split
-+ * - 2'b11 - Channel Halt
-+ * - bits 30:27 - Channel/EP Number
-+ */
-+ unsigned nptxqtop_terminate : 1;
-+ unsigned nptxqtop_token : 2;
-+ unsigned nptxqtop_chnep : 4;
-+ unsigned reserved : 1;
-+ } b;
-+} gnptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Transmit
-+ * FIFO Status Register (DTXFSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union dtxfsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned txfspcavail : 16;
-+ unsigned reserved : 16;
-+ } b;
-+} dtxfsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the I2C Control Register
-+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gi2cctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned rwdata : 8;
-+ unsigned regaddr : 8;
-+ unsigned addr : 7;
-+ unsigned i2cen : 1;
-+ unsigned ack : 1;
-+ unsigned i2csuspctl : 1;
-+ unsigned i2cdevaddr : 2;
-+ unsigned reserved : 2;
-+ unsigned rw : 1;
-+ unsigned bsydne : 1;
-+ } b;
-+} gi2cctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config1
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg1_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ep_dir0 : 2;
-+ unsigned ep_dir1 : 2;
-+ unsigned ep_dir2 : 2;
-+ unsigned ep_dir3 : 2;
-+ unsigned ep_dir4 : 2;
-+ unsigned ep_dir5 : 2;
-+ unsigned ep_dir6 : 2;
-+ unsigned ep_dir7 : 2;
-+ unsigned ep_dir8 : 2;
-+ unsigned ep_dir9 : 2;
-+ unsigned ep_dir10 : 2;
-+ unsigned ep_dir11 : 2;
-+ unsigned ep_dir12 : 2;
-+ unsigned ep_dir13 : 2;
-+ unsigned ep_dir14 : 2;
-+ unsigned ep_dir15 : 2;
-+ } b;
-+} hwcfg1_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config2
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg2_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /* GHWCFG2 */
-+ unsigned op_mode : 3;
-+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ unsigned architecture : 2;
-+ unsigned point2point : 1;
-+ unsigned hs_phy_type : 2;
-+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-+
-+ unsigned fs_phy_type : 2;
-+ unsigned num_dev_ep : 4;
-+ unsigned num_host_chan : 4;
-+ unsigned perio_ep_supported : 1;
-+ unsigned dynamic_fifo : 1;
-+ unsigned multi_proc_int : 1;
-+ unsigned reserved21 : 1;
-+ unsigned nonperio_tx_q_depth : 2;
-+ unsigned host_perio_tx_q_depth : 2;
-+ unsigned dev_token_q_depth : 5;
-+ unsigned reserved31 : 1;
-+ } b;
-+} hwcfg2_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config3
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg3_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /* GHWCFG3 */
-+ unsigned xfer_size_cntr_width : 4;
-+ unsigned packet_size_cntr_width : 3;
-+ unsigned otg_func : 1;
-+ unsigned i2c : 1;
-+ unsigned vendor_ctrl_if : 1;
-+ unsigned optional_features : 1;
-+ unsigned synch_reset_type : 1;
-+ unsigned ahb_phy_clock_synch : 1;
-+ unsigned reserved15_13 : 3;
-+ unsigned dfifo_depth : 16;
-+ } b;
-+} hwcfg3_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config4
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg4_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned num_dev_perio_in_ep : 4;
-+ unsigned power_optimiz : 1;
-+ unsigned min_ahb_freq : 9;
-+ unsigned utmi_phy_data_width : 2;
-+ unsigned num_dev_mode_ctrl_ep : 4;
-+ unsigned iddig_filt_en : 1;
-+ unsigned vbus_valid_filt_en : 1;
-+ unsigned a_valid_filt_en : 1;
-+ unsigned b_valid_filt_en : 1;
-+ unsigned session_end_filt_en : 1;
-+ unsigned ded_fifo_en : 1;
-+ unsigned num_in_eps : 4;
-+ unsigned desc_dma : 1;
-+ unsigned desc_dma_dyn : 1;
-+ } b;
-+} hwcfg4_data_t;
-+
-+////////////////////////////////////////////
-+// Device Registers
-+/**
-+ * Device Global Registers. <i>Offsets 800h-BFFh</i>
-+ *
-+ * The following structures define the size and relative field offsets
-+ * for the Device Mode Registers.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_global_regs
-+{
-+ /** Device Configuration Register. <i>Offset 800h</i> */
-+ volatile uint32_t dcfg;
-+ /** Device Control Register. <i>Offset: 804h</i> */
-+ volatile uint32_t dctl;
-+ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
-+ volatile uint32_t dsts;
-+ /** Reserved. <i>Offset: 80Ch</i> */
-+ uint32_t unused;
-+ /** Device IN Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 810h</i> */
-+ volatile uint32_t diepmsk;
-+ /** Device OUT Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 814h</i> */
-+ volatile uint32_t doepmsk;
-+ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
-+ volatile uint32_t daint;
-+ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
-+ * 81Ch</i> */
-+ volatile uint32_t daintmsk;
-+ /** Device IN Token Queue Read Register-1 (Read Only).
-+ * <i>Offset: 820h</i> */
-+ volatile uint32_t dtknqr1;
-+ /** Device IN Token Queue Read Register-2 (Read Only).
-+ * <i>Offset: 824h</i> */
-+ volatile uint32_t dtknqr2;
-+ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
-+ volatile uint32_t dvbusdis;
-+ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
-+ volatile uint32_t dvbuspulse;
-+ /** Device IN Token Queue Read Register-3 (Read Only). /
-+ * Device Thresholding control register (Read/Write)
-+ * <i>Offset: 830h</i> */
-+ volatile uint32_t dtknqr3_dthrctl;
-+ /** Device IN Token Queue Read Register-4 (Read Only). /
-+ * Device IN EPs empty Inr. Mask Register (Read/Write)
-+ * <i>Offset: 834h</i> */
-+ volatile uint32_t dtknqr4_fifoemptymsk;
-+ /** Device Each Endpoint Interrupt Register (Read Only). /
-+ * <i>Offset: 838h</i> */
-+ volatile uint32_t deachint;
-+ /** Device Each Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 83Ch</i> */
-+ volatile uint32_t deachintmsk;
-+ /** Device Each In Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 840h</i> */
-+ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
-+ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 880h</i> */
-+ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
-+} dwc_otg_device_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Configuration
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements. Write the
-+ * <i>d32</i> member to the dcfg register.
-+ */
-+typedef union dcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Device Speed */
-+ unsigned devspd : 2;
-+ /** Non Zero Length Status OUT Handshake */
-+ unsigned nzstsouthshk : 1;
-+#define DWC_DCFG_SEND_STALL 1
-+
-+ unsigned reserved3 : 1;
-+ /** Device Addresses */
-+ unsigned devaddr : 7;
-+ /** Periodic Frame Interval */
-+ unsigned perfrint : 2;
-+#define DWC_DCFG_FRAME_INTERVAL_80 0
-+#define DWC_DCFG_FRAME_INTERVAL_85 1
-+#define DWC_DCFG_FRAME_INTERVAL_90 2
-+#define DWC_DCFG_FRAME_INTERVAL_95 3
-+
-+ unsigned reserved13_17 : 5;
-+ /** In Endpoint Mis-match count */
-+ unsigned epmscnt : 5;
-+ /** Enable Descriptor DMA in Device mode */
-+ unsigned descdma : 1;
-+ } b;
-+} dcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Remote Wakeup */
-+ unsigned rmtwkupsig : 1;
-+ /** Soft Disconnect */
-+ unsigned sftdiscon : 1;
-+ /** Global Non-Periodic IN NAK Status */
-+ unsigned gnpinnaksts : 1;
-+ /** Global OUT NAK Status */
-+ unsigned goutnaksts : 1;
-+ /** Test Control */
-+ unsigned tstctl : 3;
-+ /** Set Global Non-Periodic IN NAK */
-+ unsigned sgnpinnak : 1;
-+ /** Clear Global Non-Periodic IN NAK */
-+ unsigned cgnpinnak : 1;
-+ /** Set Global OUT NAK */
-+ unsigned sgoutnak : 1;
-+ /** Clear Global OUT NAK */
-+ unsigned cgoutnak : 1;
-+
-+ /** Power-On Programming Done */
-+ unsigned pwronprgdone : 1;
-+ /** Global Continue on BNA */
-+ unsigned gcontbna : 1;
-+ /** Global Multi Count */
-+ unsigned gmc : 2;
-+ /** Ignore Frame Number for ISOC EPs */
-+ unsigned ifrmnum : 1;
-+ /** NAK on Babble */
-+ unsigned nakonbble : 1;
-+
-+ unsigned reserved16_31 : 16;
-+ } b;
-+} dctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Status
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Suspend Status */
-+ unsigned suspsts : 1;
-+ /** Enumerated Speed */
-+ unsigned enumspd : 2;
-+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
-+ /** Erratic Error */
-+ unsigned errticerr : 1;
-+ unsigned reserved4_7: 4;
-+ /** Frame or Microframe Number of the received SOF */
-+ unsigned soffn : 14;
-+ unsigned reserved22_31 : 10;
-+ } b;
-+} dsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP Interrupt
-+ * Register and the Device IN EP Common Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union diepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer complete mask */
-+ unsigned xfercompl : 1;
-+ /** Endpoint disable mask */
-+ unsigned epdisabled : 1;
-+ /** AHB Error mask */
-+ unsigned ahberr : 1;
-+ /** TimeOUT Handshake mask (non-ISOC EPs) */
-+ unsigned timeout : 1;
-+ /** IN Token received with TxF Empty mask */
-+ unsigned intktxfemp : 1;
-+ /** IN Token Received with EP mismatch mask */
-+ unsigned intknepmis : 1;
-+ /** IN Endpoint HAK Effective mask */
-+ unsigned inepnakeff : 1;
-+ /** IN Endpoint HAK Effective mask */
-+ unsigned emptyintr : 1;
-+
-+ unsigned txfifoundrn : 1;
-+
-+ /** BNA Interrupt mask */
-+ unsigned bna : 1;
-+
-+ unsigned reserved10_12 : 3;
-+ /** BNA Interrupt mask */
-+ unsigned nak : 1;
-+
-+ unsigned reserved14_31 : 18;
-+ } b;
-+} diepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union diepint_data diepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP Interrupt
-+ * Registerand Device OUT EP Common Interrupt Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union doepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer complete */
-+ unsigned xfercompl : 1;
-+ /** Endpoint disable */
-+ unsigned epdisabled : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** Setup Phase Done (contorl EPs) */
-+ unsigned setup : 1;
-+ /** OUT Token Received when Endpoint Disabled */
-+ unsigned outtknepdis : 1;
-+
-+ unsigned stsphsercvd : 1;
-+ /** Back-to-Back SETUP Packets Received */
-+ unsigned back2backsetup : 1;
-+
-+ unsigned reserved7 : 1;
-+ /** OUT packet Error */
-+ unsigned outpkterr : 1;
-+ /** BNA Interrupt */
-+ unsigned bna : 1;
-+
-+ unsigned reserved10 : 1;
-+ /** Packet Drop Status */
-+ unsigned pktdrpsts : 1;
-+ /** Babble Interrupt */
-+ unsigned babble : 1;
-+ /** NAK Interrupt */
-+ unsigned nak : 1;
-+ /** NYET Interrupt */
-+ unsigned nyet : 1;
-+
-+ unsigned reserved15_31 : 17;
-+ } b;
-+} doepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union doepint_data doepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device All EP Interrupt
-+ * and Mask Registers.
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union daint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** IN Endpoint bits */
-+ unsigned in : 16;
-+ /** OUT Endpoint bits */
-+ unsigned out : 16;
-+ } ep;
-+ struct
-+ {
-+ /** IN Endpoint bits */
-+ unsigned inep0 : 1;
-+ unsigned inep1 : 1;
-+ unsigned inep2 : 1;
-+ unsigned inep3 : 1;
-+ unsigned inep4 : 1;
-+ unsigned inep5 : 1;
-+ unsigned inep6 : 1;
-+ unsigned inep7 : 1;
-+ unsigned inep8 : 1;
-+ unsigned inep9 : 1;
-+ unsigned inep10 : 1;
-+ unsigned inep11 : 1;
-+ unsigned inep12 : 1;
-+ unsigned inep13 : 1;
-+ unsigned inep14 : 1;
-+ unsigned inep15 : 1;
-+ /** OUT Endpoint bits */
-+ unsigned outep0 : 1;
-+ unsigned outep1 : 1;
-+ unsigned outep2 : 1;
-+ unsigned outep3 : 1;
-+ unsigned outep4 : 1;
-+ unsigned outep5 : 1;
-+ unsigned outep6 : 1;
-+ unsigned outep7 : 1;
-+ unsigned outep8 : 1;
-+ unsigned outep9 : 1;
-+ unsigned outep10 : 1;
-+ unsigned outep11 : 1;
-+ unsigned outep12 : 1;
-+ unsigned outep13 : 1;
-+ unsigned outep14 : 1;
-+ unsigned outep15 : 1;
-+ } b;
-+} daint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN Token Queue
-+ * Read Registers.
-+ * - Read the register into the <i>d32</i> member.
-+ * - READ-ONLY Register
-+ */
-+typedef union dtknq1_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** In Token Queue Write Pointer */
-+ unsigned intknwptr : 5;
-+ /** Reserved */
-+ unsigned reserved05_06 : 2;
-+ /** write pointer has wrapped. */
-+ unsigned wrap_bit : 1;
-+ /** EP Numbers of IN Tokens 0 ... 4 */
-+ unsigned epnums0_5 : 24;
-+ }b;
-+} dtknq1_data_t;
-+
-+/**
-+ * This union represents Threshold control Register
-+ * - Read and write the register into the <i>d32</i> member.
-+ * - READ-WRITABLE Register
-+ */
-+typedef union dthrctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** non ISO Tx Thr. Enable */
-+ unsigned non_iso_thr_en : 1;
-+ /** ISO Tx Thr. Enable */
-+ unsigned iso_thr_en : 1;
-+ /** Tx Thr. Length */
-+ unsigned tx_thr_len : 9;
-+ /** Reserved */
-+ unsigned reserved11_15 : 5;
-+ /** Rx Thr. Enable */
-+ unsigned rx_thr_en : 1;
-+ /** Rx Thr. Length */
-+ unsigned rx_thr_len : 9;
-+ /** Reserved */
-+ unsigned reserved26_31 : 6;
-+ }b;
-+} dthrctl_data_t;
-+
-+
-+/**
-+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
-+ * 900h-AFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_in_ep_regs
-+{
-+ /** Device IN Endpoint Control Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t diepctl;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
-+ uint32_t reserved04;
-+ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t diepint;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device IN Endpoint Transfer Size
-+ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t dieptsiz;
-+ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t diepdma;
-+ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 18h</i> */
-+ volatile uint32_t dtxfsts;
-+ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 1Ch</i> */
-+ volatile uint32_t diepdmab;
-+} dwc_otg_dev_in_ep_regs_t;
-+
-+/**
-+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
-+ * B00h-CFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_out_ep_regs
-+{
-+ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t doepctl;
-+ /** Device OUT Endpoint Frame number Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 04h</i> */
-+ volatile uint32_t doepfn;
-+ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t doepint;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t doeptsiz;
-+ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t doepdma;
-+ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */
-+ uint32_t unused;
-+ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 1Ch</i> */
-+ uint32_t doepdmab;
-+} dwc_otg_dev_out_ep_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union depctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Maximum Packet Size
-+ * IN/OUT EPn
-+ * IN/OUT EP0 - 2 bits
-+ * 2'b00: 64 Bytes
-+ * 2'b01: 32
-+ * 2'b10: 16
-+ * 2'b11: 8 */
-+ unsigned mps : 11;
-+#define DWC_DEP0CTL_MPS_64 0
-+#define DWC_DEP0CTL_MPS_32 1
-+#define DWC_DEP0CTL_MPS_16 2
-+#define DWC_DEP0CTL_MPS_8 3
-+
-+ /** Next Endpoint
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned nextep : 4;
-+
-+ /** USB Active Endpoint */
-+ unsigned usbactep : 1;
-+
-+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
-+ * This field contains the PID of the packet going to
-+ * be received or transmitted on this endpoint. The
-+ * application should program the PID of the first
-+ * packet going to be received or transmitted on this
-+ * endpoint , after the endpoint is
-+ * activated. Application use the SetD1PID and
-+ * SetD0PID fields of this register to program either
-+ * D0 or D1 PID.
-+ *
-+ * The encoding for this field is
-+ * - 0: D0
-+ * - 1: D1
-+ */
-+ unsigned dpid : 1;
-+
-+ /** NAK Status */
-+ unsigned naksts : 1;
-+
-+ /** Endpoint Type
-+ * 2'b00: Control
-+ * 2'b01: Isochronous
-+ * 2'b10: Bulk
-+ * 2'b11: Interrupt */
-+ unsigned eptype : 2;
-+
-+ /** Snoop Mode
-+ * OUT EPn/OUT EP0
-+ * IN EPn/IN EP0 - reserved */
-+ unsigned snp : 1;
-+
-+ /** Stall Handshake */
-+ unsigned stall : 1;
-+
-+ /** Tx Fifo Number
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned txfnum : 4;
-+
-+ /** Clear NAK */
-+ unsigned cnak : 1;
-+ /** Set NAK */
-+ unsigned snak : 1;
-+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA0. Set Even
-+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to even (micro)
-+ * frame.
-+ */
-+ unsigned setd0pid : 1;
-+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA1 Set Odd
-+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to odd (micro) frame.
-+ */
-+ unsigned setd1pid : 1;
-+
-+ /** Endpoint Disable */
-+ unsigned epdis : 1;
-+ /** Endpoint Enable */
-+ unsigned epena : 1;
-+ } b;
-+} depctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize : 19;
-+ /** Packet Count */
-+ unsigned pktcnt : 10;
-+ /** Multi Count - Periodic IN endpoints */
-+ unsigned mc : 2;
-+ unsigned reserved : 1;
-+ } b;
-+} deptsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP 0 Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize : 7;
-+ /** Reserved */
-+ unsigned reserved7_18 : 12;
-+ /** Packet Count */
-+ unsigned pktcnt : 1;
-+ /** Reserved */
-+ unsigned reserved20_28 : 9;
-+ /**Setup Packet Count (DOEPTSIZ0 Only) */
-+ unsigned supcnt : 2;
-+ unsigned reserved31;
-+ } b;
-+} deptsiz0_data_t;
-+
-+
-+/////////////////////////////////////////////////
-+// DMA Descriptor Specific Structures
-+//
-+
-+/** Buffer status definitions */
-+
-+#define BS_HOST_READY 0x0
-+#define BS_DMA_BUSY 0x1
-+#define BS_DMA_DONE 0x2
-+#define BS_HOST_BUSY 0x3
-+
-+/** Receive/Transmit status definitions */
-+
-+#define RTS_SUCCESS 0x0
-+#define RTS_BUFFLUSH 0x1
-+#define RTS_RESERVED 0x2
-+#define RTS_BUFERR 0x3
-+
-+
-+/**
-+ * This union represents the bit fields in the DMA Descriptor
-+ * status quadlet. Read the quadlet into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
-+ * <i>b_iso_in</i> elements.
-+ */
-+typedef union desc_sts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned bytes : 16;
-+
-+ unsigned reserved16_22 : 7;
-+ /** Multiple Transfer - only for OUT EPs */
-+ unsigned mtrf : 1;
-+ /** Setup Packet received - only for OUT EPs */
-+ unsigned sr : 1;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Receive Status */
-+ unsigned sts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b;
-+
-+#ifdef DWC_EN_ISOC
-+ /** iso out quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned rxbytes : 11;
-+
-+ unsigned reserved11 : 1;
-+ /** Frame Number */
-+ unsigned framenum : 11;
-+ /** Received ISO Data PID */
-+ unsigned pid : 2;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Receive Status */
-+ unsigned rxsts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b_iso_out;
-+
-+ /** iso in quadlet bits */
-+ struct {
-+ /** Transmited number of bytes */
-+ unsigned txbytes : 12;
-+ /** Frame Number */
-+ unsigned framenum : 11;
-+ /** Transmited ISO Data PID */
-+ unsigned pid : 2;
-+ /** Interrupt On Complete */
-+ unsigned ioc : 1;
-+ /** Short Packet */
-+ unsigned sp : 1;
-+ /** Last */
-+ unsigned l : 1;
-+ /** Transmit Status */
-+ unsigned txsts : 2;
-+ /** Buffer Status */
-+ unsigned bs : 2;
-+ } b_iso_in;
-+#endif //DWC_EN_ISOC
-+} desc_sts_data_t;
-+
-+/**
-+ * DMA Descriptor structure
-+ *
-+ * DMA Descriptor structure contains two quadlets:
-+ * Status quadlet and Data buffer pointer.
-+ */
-+typedef struct dwc_otg_dma_desc
-+{
-+ /** DMA Descriptor status quadlet */
-+ desc_sts_data_t status;
-+ /** DMA Descriptor data buffer pointer */
-+ dma_addr_t buf;
-+} dwc_otg_dma_desc_t;
-+
-+/**
-+ * The dwc_otg_dev_if structure contains information needed to manage
-+ * the DWC_otg controller acting in device mode. It represents the
-+ * programming view of the device-specific aspects of the controller.
-+ */
-+typedef struct dwc_otg_dev_if
-+{
-+ /** Pointer to device Global registers.
-+ * Device Global Registers starting at offset 800h
-+ */
-+ dwc_otg_device_global_regs_t *dev_global_regs;
-+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-+
-+ /**
-+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
-+ */
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-+#define DWC_EP_REG_OFFSET 0x20
-+
-+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-+
-+ /* Device configuration information*/
-+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
-+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
-+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-+
-+ /** Size of periodic FIFOs (Bytes) */
-+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+
-+ /** Size of Tx FIFOs (Bytes) */
-+ uint16_t tx_fifo_size[MAX_TX_FIFOS];
-+
-+ /** Thresholding enable flags and length varaiables **/
-+ uint16_t rx_thr_en;
-+ uint16_t iso_tx_thr_en;
-+ uint16_t non_iso_tx_thr_en;
-+
-+ uint16_t rx_thr_length;
-+ uint16_t tx_thr_length;
-+
-+ /**
-+ * Pointers to the DMA Descriptors for EP0 Control
-+ * transfers (virtual and physical)
-+ */
-+
-+ /** 2 descriptors for SETUP packets */
-+ uint32_t dma_setup_desc_addr[2];
-+ dwc_otg_dma_desc_t* setup_desc_addr[2];
-+
-+ /** Pointer to Descriptor with latest SETUP packet */
-+ dwc_otg_dma_desc_t* psetup;
-+
-+ /** Index of current SETUP handler descriptor */
-+ uint32_t setup_desc_index;
-+
-+ /** Descriptor for Data In or Status In phases */
-+ uint32_t dma_in_desc_addr;
-+ dwc_otg_dma_desc_t* in_desc_addr;;
-+
-+ /** Descriptor for Data Out or Status Out phases */
-+ uint32_t dma_out_desc_addr;
-+ dwc_otg_dma_desc_t* out_desc_addr;
-+
-+} dwc_otg_dev_if_t;
-+
-+
-+
-+
-+/////////////////////////////////////////////////
-+// Host Mode Register Structures
-+//
-+/**
-+ * The Host Global Registers structure defines the size and relative
-+ * field offsets for the Host Mode Global Registers. Host Global
-+ * Registers offsets 400h-7FFh.
-+*/
-+typedef struct dwc_otg_host_global_regs
-+{
-+ /** Host Configuration Register. <i>Offset: 400h</i> */
-+ volatile uint32_t hcfg;
-+ /** Host Frame Interval Register. <i>Offset: 404h</i> */
-+ volatile uint32_t hfir;
-+ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
-+ volatile uint32_t hfnum;
-+ /** Reserved. <i>Offset: 40Ch</i> */
-+ uint32_t reserved40C;
-+ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
-+ volatile uint32_t hptxsts;
-+ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
-+ volatile uint32_t haint;
-+ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
-+ volatile uint32_t haintmsk;
-+} dwc_otg_host_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Configuration Register.
-+ * Read the register into the <i>d32</i> member then set/clear the bits using
-+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
-+ */
-+typedef union hcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** FS/LS Phy Clock Select */
-+ unsigned fslspclksel : 2;
-+#define DWC_HCFG_30_60_MHZ 0
-+#define DWC_HCFG_48_MHZ 1
-+#define DWC_HCFG_6_MHZ 2
-+
-+ /** FS/LS Only Support */
-+ unsigned fslssupp : 1;
-+ } b;
-+} hcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfir_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned frint : 16;
-+ unsigned reserved : 16;
-+ } b;
-+} hfir_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfnum_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned frnum : 16;
-+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
-+ unsigned frrem : 16;
-+ } b;
-+} hfnum_data_t;
-+
-+typedef union hptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ptxfspcavail : 16;
-+ unsigned ptxqspcavail : 8;
-+ /** Top of the Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (last entry for the selected channel)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - Zero length
-+ * - 2'b01 - Ping
-+ * - 2'b10 - Disable
-+ * - bits 30:27 - Channel Number
-+ * - bit 31 - Odd/even microframe
-+ */
-+ unsigned ptxqtop_terminate : 1;
-+ unsigned ptxqtop_token : 2;
-+ unsigned ptxqtop_chnum : 4;
-+ unsigned ptxqtop_odd : 1;
-+ } b;
-+} hptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Port Control and Status
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hprt0 register.
-+ */
-+typedef union hprt0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned prtconnsts : 1;
-+ unsigned prtconndet : 1;
-+ unsigned prtena : 1;
-+ unsigned prtenchng : 1;
-+ unsigned prtovrcurract : 1;
-+ unsigned prtovrcurrchng : 1;
-+ unsigned prtres : 1;
-+ unsigned prtsusp : 1;
-+ unsigned prtrst : 1;
-+ unsigned reserved9 : 1;
-+ unsigned prtlnsts : 2;
-+ unsigned prtpwr : 1;
-+ unsigned prttstctl : 4;
-+ unsigned prtspd : 2;
-+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
-+ unsigned reserved19_31 : 13;
-+ } b;
-+} hprt0_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ch0 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch15 : 1;
-+ unsigned reserved : 16;
-+ } b;
-+
-+ struct
-+ {
-+ unsigned chint : 16;
-+ unsigned reserved : 16;
-+ } b2;
-+} haint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned ch0 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch15 : 1;
-+ unsigned reserved : 16;
-+ } b;
-+
-+ struct
-+ {
-+ unsigned chint : 16;
-+ unsigned reserved : 16;
-+ } b2;
-+} haintmsk_data_t;
-+
-+/**
-+ * Host Channel Specific Registers. <i>500h-5FCh</i>
-+ */
-+typedef struct dwc_otg_hc_regs
-+{
-+ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
-+ volatile uint32_t hcchar;
-+ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
-+ volatile uint32_t hcsplt;
-+ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
-+ volatile uint32_t hcint;
-+ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
-+ volatile uint32_t hcintmsk;
-+ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
-+ volatile uint32_t hctsiz;
-+ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
-+ volatile uint32_t hcdma;
-+ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
-+ uint32_t reserved[2];
-+} dwc_otg_hc_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Characteristics
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hcchar_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Maximum packet size in bytes */
-+ unsigned mps : 11;
-+
-+ /** Endpoint number */
-+ unsigned epnum : 4;
-+
-+ /** 0: OUT, 1: IN */
-+ unsigned epdir : 1;
-+
-+ unsigned reserved : 1;
-+
-+ /** 0: Full/high speed device, 1: Low speed device */
-+ unsigned lspddev : 1;
-+
-+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-+ unsigned eptype : 2;
-+
-+ /** Packets per frame for periodic transfers. 0 is reserved. */
-+ unsigned multicnt : 2;
-+
-+ /** Device address */
-+ unsigned devaddr : 7;
-+
-+ /**
-+ * Frame to transmit periodic transaction.
-+ * 0: even, 1: odd
-+ */
-+ unsigned oddfrm : 1;
-+
-+ /** Channel disable */
-+ unsigned chdis : 1;
-+
-+ /** Channel enable */
-+ unsigned chen : 1;
-+ } b;
-+} hcchar_data_t;
-+
-+typedef union hcsplt_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Port Address */
-+ unsigned prtaddr : 7;
-+
-+ /** Hub Address */
-+ unsigned hubaddr : 7;
-+
-+ /** Transaction Position */
-+ unsigned xactpos : 2;
-+#define DWC_HCSPLIT_XACTPOS_MID 0
-+#define DWC_HCSPLIT_XACTPOS_END 1
-+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-+#define DWC_HCSPLIT_XACTPOS_ALL 3
-+
-+ /** Do Complete Split */
-+ unsigned compsplt : 1;
-+
-+ /** Reserved */
-+ unsigned reserved : 14;
-+
-+ /** Split Enble */
-+ unsigned spltena : 1;
-+ } b;
-+} hcsplt_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union hcint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Transfer Complete */
-+ unsigned xfercomp : 1;
-+ /** Channel Halted */
-+ unsigned chhltd : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** STALL Response Received */
-+ unsigned stall : 1;
-+ /** NAK Response Received */
-+ unsigned nak : 1;
-+ /** ACK Response Received */
-+ unsigned ack : 1;
-+ /** NYET Response Received */
-+ unsigned nyet : 1;
-+ /** Transaction Err */
-+ unsigned xacterr : 1;
-+ /** Babble Error */
-+ unsigned bblerr : 1;
-+ /** Frame Overrun */
-+ unsigned frmovrun : 1;
-+ /** Data Toggle Error */
-+ unsigned datatglerr : 1;
-+ /** Reserved */
-+ unsigned reserved : 21;
-+ } b;
-+} hcint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Transfer Size
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hctsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Total transfer size in bytes */
-+ unsigned xfersize : 19;
-+
-+ /** Data packets to transfer */
-+ unsigned pktcnt : 10;
-+
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control), SETUP (Control)
-+ */
-+ unsigned pid : 2;
-+#define DWC_HCTSIZ_DATA0 0
-+#define DWC_HCTSIZ_DATA1 2
-+#define DWC_HCTSIZ_DATA2 1
-+#define DWC_HCTSIZ_MDATA 3
-+#define DWC_HCTSIZ_SETUP 3
-+
-+ /** Do PING protocol when 1 */
-+ unsigned dopng : 1;
-+ } b;
-+} hctsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Interrupt Mask
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcintmsk register.
-+ */
-+typedef union hcintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ unsigned xfercompl : 1;
-+ unsigned chhltd : 1;
-+ unsigned ahberr : 1;
-+ unsigned stall : 1;
-+ unsigned nak : 1;
-+ unsigned ack : 1;
-+ unsigned nyet : 1;
-+ unsigned xacterr : 1;
-+ unsigned bblerr : 1;
-+ unsigned frmovrun : 1;
-+ unsigned datatglerr : 1;
-+ unsigned reserved : 21;
-+ } b;
-+} hcintmsk_data_t;
-+
-+/** OTG Host Interface Structure.
-+ *
-+ * The OTG Host Interface Structure structure contains information
-+ * needed to manage the DWC_otg controller acting in host mode. It
-+ * represents the programming view of the host-specific aspects of the
-+ * controller.
-+ */
-+typedef struct dwc_otg_host_if
-+{
-+ /** Host Global Registers starting at offset 400h.*/
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-+
-+ /** Host Port 0 Control and Status Register */
-+ volatile uint32_t *hprt0;
-+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-+
-+
-+ /** Host Channel Specific Registers at offsets 500h-5FCh. */
-+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-+
-+
-+ /* Host configuration information */
-+ /** Number of Host Channels (range: 1-16) */
-+ uint8_t num_host_channels;
-+ /** Periodic EPs supported (0: no, 1: yes) */
-+ uint8_t perio_eps_supported;
-+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
-+ uint16_t perio_tx_fifo_size;
-+
-+} dwc_otg_host_if_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Power and Clock Gating Control
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union pcgcctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct
-+ {
-+ /** Stop Pclk */
-+ unsigned stoppclk : 1;
-+ /** Gate Hclk */
-+ unsigned gatehclk : 1;
-+ /** Power Clamp */
-+ unsigned pwrclmp : 1;
-+ /** Reset Power Down Modules */
-+ unsigned rstpdwnmodule : 1;
-+ /** PHY Suspended */
-+ unsigned physuspended : 1;
-+
-+ unsigned reserved : 27;
-+ } b;
-+} pcgcctl_data_t;
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
-@@ -0,0 +1,260 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $
-+ * $Revision: 1.2 $
-+ * $Date: 2008-11-21 05:39:16 $
-+ * $Change: 1064915 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_PLAT_H__)
-+#define __DWC_OTG_PLAT_H__
-+
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the Platform Specific constants, interfaces
-+ * (functions and macros) for Linux.
-+ *
-+ */
-+//#if !defined(__LINUX_ARM_ARCH__)
-+//#error "The contents of this file is Linux specific!!!"
-+//#endif
-+
-+/**
-+ * Reads the content of a register.
-+ *
-+ * @param reg address of register to read.
-+ * @return contents of the register.
-+ *
-+
-+ * Usage:<br>
-+ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
-+ */
-+static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg)
-+{
-+ return readl(reg);
-+};
-+
-+/**
-+ * Writes a register with a 32 bit value.
-+ *
-+ * @param reg address of register to read.
-+ * @param value to write to _reg.
-+ *
-+ * Usage:<br>
-+ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
-+ */
-+static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value)
-+{
-+ writel( value, reg );
-+};
-+
-+/**
-+ * This function modifies bit values in a register. Using the
-+ * algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ *
-+ * @param reg address of register to read.
-+ * @param clear_mask bit mask to be cleared.
-+ * @param set_mask bit mask to be set.
-+ *
-+ * Usage:<br>
-+ * <code> // Clear the SOF Interrupt Mask bit and <br>
-+ * // set the OTG Interrupt mask bit, leaving all others as they were.
-+ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
-+ */
-+static __inline__
-+ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask)
-+{
-+ writel( (readl(reg) & ~clear_mask) | set_mask, reg );
-+};
-+
-+
-+/**
-+ * Wrapper for the OS micro-second delay function.
-+ * @param[in] usecs Microseconds of delay
-+ */
-+static __inline__ void UDELAY( const uint32_t usecs )
-+{
-+ udelay( usecs );
-+}
-+
-+/**
-+ * Wrapper for the OS milli-second delay function.
-+ * @param[in] msecs milliseconds of delay
-+ */
-+static __inline__ void MDELAY( const uint32_t msecs )
-+{
-+ mdelay( msecs );
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_lock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_LOCK( spinlock_t *lock )
-+{
-+ spin_lock(lock);
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_UNLOCK( spinlock_t *lock )
-+{
-+ spin_unlock(lock);
-+}
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param l Pointer to the spinlock.
-+ * @param f unsigned long for irq flags storage.
-+ */
-+#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f);
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param l Pointer to the spinlock.
-+ * @param f unsigned long for irq flags storage.
-+ */
-+#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f);
-+
-+/*
-+ * Debugging support vanishes in non-debug builds.
-+ */
-+
-+
-+/**
-+ * The Debug Level bit-mask variable.
-+ */
-+extern uint32_t g_dbg_lvl;
-+/**
-+ * Set the Debug Level variable.
-+ */
-+static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new )
-+{
-+ uint32_t old = g_dbg_lvl;
-+ g_dbg_lvl = new;
-+ return old;
-+}
-+
-+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-+#define DBG_CIL (0x2)
-+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
-+ * messages */
-+#define DBG_CILV (0x20)
-+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
-+ * messages */
-+#define DBG_PCD (0x4)
-+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
-+ * messages */
-+#define DBG_PCDV (0x40)
-+/** When debug level has the DBG_HCD bit set, display Host debug messages */
-+#define DBG_HCD (0x8)
-+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
-+ * messages */
-+#define DBG_HCDV (0x80)
-+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
-+ * mode. */
-+#define DBG_HCD_URB (0x800)
-+
-+/** When debug level has any bit set, display debug messages */
-+#define DBG_ANY (0xFF)
-+
-+/** All debug messages off */
-+#define DBG_OFF 0
-+
-+/** Prefix string for DWC_DEBUG print macros. */
-+#define USB_DWC "dwc_otg: "
-+
-+/**
-+ * Print a debug message when the Global debug level variable contains
-+ * the bit defined in <code>lvl</code>.
-+ *
-+ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
-+ * @param[in] x - like printf
-+ *
-+ * Example:<p>
-+ * <code>
-+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
-+ * </code>
-+ * <br>
-+ * results in:<br>
-+ * <code>
-+ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
-+ * </code>
-+ */
-+#ifdef DEBUG
-+
-+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-+
-+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-+
-+#else
-+
-+# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-+# define DWC_DEBUGP(x...)
-+
-+# define CHK_DEBUG_LEVEL(level) (0)
-+
-+#endif /*DEBUG*/
-+
-+/**
-+ * Print an Error message.
-+ */
-+#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-+/**
-+ * Print a Warning message.
-+ */
-+#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-+/**
-+ * Print a notice (normal but significant message).
-+ */
-+#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-+/**
-+ * Basic message printing.
-+ */
-+#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-+
-+#endif
-+
diff --git a/target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch
deleted file mode 100644
index f0b2e66..0000000
--- a/target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 16f476a7528eefade4bd4ebee12d5aa2052bba8c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 15 Mar 2013 18:16:01 +0100
-Subject: [PATCH 122/133] serial: ralink: adds mt7620 serial
-
-Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/8250/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -300,7 +300,7 @@ config SERIAL_8250_EM
-
- config SERIAL_8250_RT288X
- bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
- help
- If you have a Ralink RT288x/RT305x SoC based board and want to use the
- serial port, say Y to this option. The driver can handle up to 2 serial
diff --git a/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
deleted file mode 100644
index b7c9987..0000000
--- a/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 304c4f060cfa6b44370ad3fe6a16963cac35b10a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:52:01 +0000
-Subject: [PATCH 123/133] serial: ralink: the core has a size of 0x100 and not
- 0x1000
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/8250/8250_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -2499,7 +2499,7 @@ serial8250_pm(struct uart_port *port, un
- static unsigned int serial8250_port_size(struct uart_8250_port *pt)
- {
- if (pt->port.iotype == UPIO_AU)
-- return 0x1000;
-+ return 0x100;
- if (is_omap1_8250(pt))
- return 0x16 << pt->port.regshift;
-
diff --git a/target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
deleted file mode 100644
index 8bd00e9..0000000
--- a/target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 3f70be332048f6a903dc35f73ff5381be3b8f12b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:18:57 +0200
-Subject: [PATCH 124/133] serial: of: allow au1x00 and rt288x to load from OF
-
-In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
-to default the iotype to UPIO_AU.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/of_serial.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/tty/serial/of_serial.c
-+++ b/drivers/tty/serial/of_serial.c
-@@ -103,7 +103,10 @@ static int of_platform_serial_setup(stru
- port->fifosize = prop;
-
- port->irq = irq_of_parse_and_map(np, 0);
-- port->iotype = UPIO_MEM;
-+ if (of_device_is_compatible(np, "ralink,rt2880-uart"))
-+ port->iotype = UPIO_AU;
-+ else
-+ port->iotype = UPIO_MEM;
- if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
- switch (prop) {
- case 1:
diff --git a/target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch
deleted file mode 100644
index 99654a1..0000000
--- a/target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ /dev/null
@@ -1,345 +0,0 @@
-From 701cd2fb0513d17f248048b3a6f2c7d1ea294681 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 29 Apr 2013 14:40:43 +0200
-Subject: [PATCH 125/133] i2c: MIPS: adds ralink I2C driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-ralink.c | 274 ++++++++++++++++++++
- 4 files changed, 306 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
- create mode 100644 drivers/i2c/busses/i2c-ralink.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-@@ -0,0 +1,27 @@
-+I2C for Ralink platforms
-+
-+Required properties :
-+- compatible : Must be "link,rt3052-i2c"
-+- reg: physical base address of the controller and length of memory mapped
-+ region.
-+- #address-cells = <1>;
-+- #size-cells = <0>;
-+
-+Optional properties:
-+- Child nodes conforming to i2c bus binding
-+
-+Example :
-+
-+palmbus@10000000 {
-+ i2c@900 {
-+ compatible = "link,rt3052-i2c";
-+ reg = <0x900 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hwmon@4b {
-+ compatible = "national,lm92";
-+ reg = <0x4b>;
-+ };
-+ };
-+};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -632,6 +632,10 @@ config I2C_PXA_SLAVE
- is necessary for systems where the PXA may be a target on the
- I2C bus.
-
-+config I2C_RALINK
-+ tristate "Ralink I2C Controller"
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
- obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
-+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
- obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
- obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
- obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,274 @@
-+/*
-+ * drivers/i2c/busses/i2c-ralink.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/of_i2c.h>
-+#include <linux/err.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define REG_CONFIG_REG 0x00
-+#define REG_CLKDIV_REG 0x04
-+#define REG_DEVADDR_REG 0x08
-+#define REG_ADDR_REG 0x0C
-+#define REG_DATAOUT_REG 0x10
-+#define REG_DATAIN_REG 0x14
-+#define REG_STATUS_REG 0x18
-+#define REG_STARTXFR_REG 0x1C
-+#define REG_BYTECNT_REG 0x20
-+
-+#define I2C_STARTERR BIT(4)
-+#define I2C_ACKERR BIT(3)
-+#define I2C_DATARDY BIT(2)
-+#define I2C_SDOEMPTY BIT(1)
-+#define I2C_BUSY BIT(0)
-+
-+#define I2C_DEVADLEN_7 (6 << 2)
-+#define I2C_ADDRDIS BIT(1)
-+
-+#define I2C_RETRY 0x400
-+
-+#define CLKDIV_VALUE 200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
-+//#define CLKDIV_VALUE 50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
-+
-+#define READ_CMD 0x01
-+#define WRITE_CMD 0x00
-+#define READ_BLOCK 64
-+
-+static void __iomem *membase;
-+static struct i2c_adapter *adapter;
-+
-+static void rt_i2c_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, membase + reg);
-+}
-+
-+static u32 rt_i2c_r32(unsigned reg)
-+{
-+ return ioread32(membase + reg);
-+}
-+
-+static inline int rt_i2c_wait_rx_done(void)
-+{
-+ int retries = I2C_RETRY;
-+
-+ do {
-+ if (!retries--)
-+ break;
-+ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
-+
-+ return (retries < 0);
-+}
-+
-+static inline int rt_i2c_wait_idle(void)
-+{
-+ int retries = I2C_RETRY;
-+
-+ do {
-+ if (!retries--)
-+ break;
-+ } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
-+
-+ return (retries < 0);
-+}
-+
-+static inline int rt_i2c_wait_tx_done(void)
-+{
-+ int retries = I2C_RETRY;
-+
-+ do {
-+ if (!retries--)
-+ break;
-+ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
-+
-+ return (retries < 0);
-+}
-+
-+static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
-+{
-+ int i = 0, j = 0, pos = 0;
-+ int nblock = msg->len / READ_BLOCK;
-+ int rem = msg->len % READ_BLOCK;
-+
-+ if (msg->flags & I2C_M_TEN) {
-+ printk("10 bits addr not supported\n");
-+ return -EINVAL;
-+ }
-+
-+ if (msg->flags & I2C_M_RD) {
-+ for (i = 0; i < nblock; i++) {
-+ rt_i2c_wait_idle();
-+ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+ for (j = 0; j < READ_BLOCK; j++) {
-+ if (rt_i2c_wait_rx_done())
-+ return -1;
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ }
-+
-+ rt_i2c_wait_idle();
-+ rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+ for (i = 0; i < rem; i++) {
-+ if (rt_i2c_wait_rx_done())
-+ return -1;
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ } else {
-+ rt_i2c_wait_idle();
-+ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
-+ for (i = 0; i < msg->len; i++) {
-+ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
-+ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
-+ if (rt_i2c_wait_tx_done())
-+ return -1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
-+{
-+ int i = 0;
-+ int ret = 0;
-+
-+ if (rt_i2c_wait_idle()) {
-+ printk("i2c transfer failed\n");
-+ return 0;
-+ }
-+
-+ device_reset(a->dev.parent);
-+
-+ rt_i2c_w32(m->addr, REG_DEVADDR_REG);
-+ rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
-+ rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
-+
-+ for (i = 0; i < n && !ret; i++)
-+ ret = rt_i2c_handle_msg(a, &m[i]);
-+
-+ if (ret) {
-+ printk("i2c transfer failed\n");
-+ return 0;
-+ }
-+
-+ return n;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+ .master_xfer = rt_i2c_master_xfer,
-+ .functionality = rt_i2c_func,
-+};
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ int ret;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENODEV;
-+ }
-+
-+ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
-+ if (!adapter) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+
-+ membase = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(membase))
-+ return PTR_ERR(membase);
-+
-+ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
-+ adapter->owner = THIS_MODULE;
-+ adapter->nr = pdev->id;
-+ adapter->timeout = HZ;
-+ adapter->algo = &rt_i2c_algo;
-+ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adapter->dev.parent = &pdev->dev;
-+ adapter->dev.of_node = pdev->dev.of_node;
-+
-+ ret = i2c_add_numbered_adapter(adapter);
-+ if (ret)
-+ return ret;
-+
-+ of_i2c_register_devices(adapter);
-+
-+ platform_set_drvdata(pdev, adapter);
-+
-+ dev_info(&pdev->dev, "loaded\n");
-+
-+ return 0;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+ { .compatible = "ralink,rt2880-i2c", },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static struct platform_driver rt_i2c_driver = {
-+ .probe = rt_i2c_probe,
-+ .remove = rt_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-ralink",
-+ .of_match_table = i2c_rt_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+ return platform_driver_register(&rt_i2c_driver);
-+}
-+subsys_initcall(i2c_rt_init);
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+ platform_driver_unregister(&rt_i2c_driver);
-+}
-+
-+module_exit (i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("Ralink I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:Ralink-I2C");
diff --git a/target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch b/target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch
deleted file mode 100644
index 1dcba05..0000000
--- a/target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b07600f50efe84d7e3b431e6d10fe774bb00d573 Mon Sep 17 00:00:00 2001
-From: Stephen Warren <swarren@wwwdotorg.org>
-Date: Tue, 21 May 2013 20:36:34 -0600
-Subject: [PATCH 126/133] spi: introduce macros to set bits_per_word_mask
-
-Introduce two macros to make setting up spi_master.bits_per_word_mask
-easier, and avoid mistakes like writing BIT(n) instead of BIT(n - 1).
-
-SPI_BPW_MASK is for a single supported value of bits_per_word_mask.
-
-SPI_BPW_RANGE_MASK represents a contiguous set of bit lengths.
-
-Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
-Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
----
- include/linux/spi/spi.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -308,6 +308,8 @@ struct spi_master {
-
- /* bitmask of supported bits_per_word for transfers */
- u32 bits_per_word_mask;
-+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
-+#define SPI_BPW_RANGE_MASK(min, max) ((BIT(max) - 1) - (BIT(min) - 1))
-
- /* other constraints relevant to this driver */
- u16 flags;
diff --git a/target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
deleted file mode 100644
index 3985718..0000000
--- a/target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ /dev/null
@@ -1,3433 +0,0 @@
-From 759e011e67792898799fb54340ba5bad944274a1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 2 May 2013 14:59:01 +0200
-Subject: [PATCH 127/133] mmc: MIPS: ralink: add sdhci for mt7620a SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mmc/host/Kconfig | 11 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/mt6575_sd.h | 1068 ++++++++++++++++++
- drivers/mmc/host/sdhci-mt7620.c | 2314 +++++++++++++++++++++++++++++++++++++++
- 4 files changed, 3394 insertions(+)
- create mode 100644 drivers/mmc/host/mt6575_sd.h
- create mode 100644 drivers/mmc/host/sdhci-mt7620.c
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -260,6 +260,17 @@ config MMC_SDHCI_BCM2835
-
- If unsure, say N.
-
-+config MMC_SDHCI_MT7620
-+ tristate "SDHCI platform support for the MT7620 SD/MMC Controller"
-+ depends on SOC_MT7620
-+ depends on MMC_SDHCI_PLTFM
-+ select MMC_SDHCI_IO_ACCESSORS
-+ help
-+ This selects the BCM2835 SD/MMC controller. If you have a BCM2835
-+ platform with SD or MMC devices, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_OMAP
- tristate "TI OMAP Multimedia Card Interface support"
- depends on ARCH_OMAP
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-
- obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
- obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
- obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
-+obj-$(CONFIG_MMC_SDHCI_MT7620) += sdhci-mt7620.o
-
- ifeq ($(CONFIG_CB710_DEBUG),y)
- CFLAGS-cb710-mmc += -DDEBUG
---- /dev/null
-+++ b/drivers/mmc/host/mt6575_sd.h
-@@ -0,0 +1,1068 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef MT6575_SD_H
-+#define MT6575_SD_H
-+
-+#include <linux/bitops.h>
-+#include <linux/mmc/host.h>
-+
-+// #include <mach/mt6575_reg_base.h> /* --- by chhung */
-+
-+typedef void (*sdio_irq_handler_t)(void*); /* external irq handler */
-+typedef void (*pm_callback_t)(pm_message_t state, void *data);
-+
-+#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
-+#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
-+#define MSDC_RST_PIN_EN (1 << 2) /* emmc reset pin is wired */
-+#define MSDC_SDIO_IRQ (1 << 3) /* use internal sdio irq (bus) */
-+#define MSDC_EXT_SDIO_IRQ (1 << 4) /* use external sdio irq */
-+#define MSDC_REMOVABLE (1 << 5) /* removable slot */
-+#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
-+#define MSDC_HIGHSPEED (1 << 7) /* high-speed mode support */
-+#define MSDC_UHS1 (1 << 8) /* uhs-1 mode support */
-+#define MSDC_DDR (1 << 9) /* ddr mode support */
-+#define MSDC_SPE (1 << 10) /* special support */
-+#define MSDC_INTERNAL_CLK (1 << 11) /* Force Internal clock */
-+#define MSDC_TABDRV (1 << 12) /* TABLET */
-+
-+
-+#define MSDC_SMPL_RISING (0)
-+#define MSDC_SMPL_FALLING (1)
-+
-+#define MSDC_CMD_PIN (0)
-+#define MSDC_DAT_PIN (1)
-+#define MSDC_CD_PIN (2)
-+#define MSDC_WP_PIN (3)
-+#define MSDC_RST_PIN (4)
-+
-+enum {
-+ MSDC_CLKSRC_26MHZ = 0,
-+ MSDC_CLKSRC_197MHZ = 1,
-+ MSDC_CLKSRC_208MHZ = 2
-+};
-+
-+struct msdc_hw {
-+ unsigned char clk_src; /* host clock source */
-+ unsigned char cmd_edge; /* command latch edge */
-+ unsigned char data_edge; /* data latch edge */
-+ unsigned char clk_drv; /* clock pad driving */
-+ unsigned char cmd_drv; /* command pad driving */
-+ unsigned char dat_drv; /* data pad driving */
-+ unsigned long flags; /* hardware capability flags */
-+ unsigned long data_pins; /* data pins */
-+ unsigned long data_offset; /* data address offset */
-+
-+ /* config gpio pull mode */
-+ void (*config_gpio_pin)(int type, int pull);
-+
-+ /* external power control for card */
-+ void (*ext_power_on)(void);
-+ void (*ext_power_off)(void);
-+
-+ /* external sdio irq operations */
-+ void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
-+ void (*enable_sdio_eirq)(void);
-+ void (*disable_sdio_eirq)(void);
-+
-+ /* external cd irq operations */
-+ void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
-+ void (*enable_cd_eirq)(void);
-+ void (*disable_cd_eirq)(void);
-+ int (*get_cd_status)(void);
-+
-+ /* power management callback for external module */
-+ void (*register_pm)(pm_callback_t pm_cb, void *data);
-+};
-+
-+extern struct msdc_hw msdc0_hw;
-+extern struct msdc_hw msdc1_hw;
-+extern struct msdc_hw msdc2_hw;
-+extern struct msdc_hw msdc3_hw;
-+
-+
-+/*--------------------------------------------------------------------------*/
-+/* Common Macro */
-+/*--------------------------------------------------------------------------*/
-+#define REG_ADDR(x) ((volatile u32*)(base + OFFSET_##x))
-+
-+/*--------------------------------------------------------------------------*/
-+/* Common Definition */
-+/*--------------------------------------------------------------------------*/
-+#define MSDC_FIFO_SZ (128)
-+#define MSDC_FIFO_THD (64) // (128)
-+#define MSDC_NUM (4)
-+
-+#define MSDC_MS (0)
-+#define MSDC_SDMMC (1)
-+
-+#define MSDC_MODE_UNKNOWN (0)
-+#define MSDC_MODE_PIO (1)
-+#define MSDC_MODE_DMA_BASIC (2)
-+#define MSDC_MODE_DMA_DESC (3)
-+#define MSDC_MODE_DMA_ENHANCED (4)
-+#define MSDC_MODE_MMC_STREAM (5)
-+
-+#define MSDC_BUS_1BITS (0)
-+#define MSDC_BUS_4BITS (1)
-+#define MSDC_BUS_8BITS (2)
-+
-+#define MSDC_BRUST_8B (3)
-+#define MSDC_BRUST_16B (4)
-+#define MSDC_BRUST_32B (5)
-+#define MSDC_BRUST_64B (6)
-+
-+#define MSDC_PIN_PULL_NONE (0)
-+#define MSDC_PIN_PULL_DOWN (1)
-+#define MSDC_PIN_PULL_UP (2)
-+#define MSDC_PIN_KEEP (3)
-+
-+#define MSDC_MAX_SCLK (48000000) /* +/- by chhung */
-+#define MSDC_MIN_SCLK (260000)
-+
-+#define MSDC_AUTOCMD12 (0x0001)
-+#define MSDC_AUTOCMD23 (0x0002)
-+#define MSDC_AUTOCMD19 (0x0003)
-+
-+#define MSDC_EMMC_BOOTMODE0 (0) /* Pull low CMD mode */
-+#define MSDC_EMMC_BOOTMODE1 (1) /* Reset CMD mode */
-+
-+enum {
-+ RESP_NONE = 0,
-+ RESP_R1,
-+ RESP_R2,
-+ RESP_R3,
-+ RESP_R4,
-+ RESP_R5,
-+ RESP_R6,
-+ RESP_R7,
-+ RESP_R1B
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Offset */
-+/*--------------------------------------------------------------------------*/
-+#define OFFSET_MSDC_CFG (0x0)
-+#define OFFSET_MSDC_IOCON (0x04)
-+#define OFFSET_MSDC_PS (0x08)
-+#define OFFSET_MSDC_INT (0x0c)
-+#define OFFSET_MSDC_INTEN (0x10)
-+#define OFFSET_MSDC_FIFOCS (0x14)
-+#define OFFSET_MSDC_TXDATA (0x18)
-+#define OFFSET_MSDC_RXDATA (0x1c)
-+#define OFFSET_SDC_CFG (0x30)
-+#define OFFSET_SDC_CMD (0x34)
-+#define OFFSET_SDC_ARG (0x38)
-+#define OFFSET_SDC_STS (0x3c)
-+#define OFFSET_SDC_RESP0 (0x40)
-+#define OFFSET_SDC_RESP1 (0x44)
-+#define OFFSET_SDC_RESP2 (0x48)
-+#define OFFSET_SDC_RESP3 (0x4c)
-+#define OFFSET_SDC_BLK_NUM (0x50)
-+#define OFFSET_SDC_CSTS (0x58)
-+#define OFFSET_SDC_CSTS_EN (0x5c)
-+#define OFFSET_SDC_DCRC_STS (0x60)
-+#define OFFSET_EMMC_CFG0 (0x70)
-+#define OFFSET_EMMC_CFG1 (0x74)
-+#define OFFSET_EMMC_STS (0x78)
-+#define OFFSET_EMMC_IOCON (0x7c)
-+#define OFFSET_SDC_ACMD_RESP (0x80)
-+#define OFFSET_SDC_ACMD19_TRG (0x84)
-+#define OFFSET_SDC_ACMD19_STS (0x88)
-+#define OFFSET_MSDC_DMA_SA (0x90)
-+#define OFFSET_MSDC_DMA_CA (0x94)
-+#define OFFSET_MSDC_DMA_CTRL (0x98)
-+#define OFFSET_MSDC_DMA_CFG (0x9c)
-+#define OFFSET_MSDC_DBG_SEL (0xa0)
-+#define OFFSET_MSDC_DBG_OUT (0xa4)
-+#define OFFSET_MSDC_PATCH_BIT (0xb0)
-+#define OFFSET_MSDC_PATCH_BIT1 (0xb4)
-+#define OFFSET_MSDC_PAD_CTL0 (0xe0)
-+#define OFFSET_MSDC_PAD_CTL1 (0xe4)
-+#define OFFSET_MSDC_PAD_CTL2 (0xe8)
-+#define OFFSET_MSDC_PAD_TUNE (0xec)
-+#define OFFSET_MSDC_DAT_RDDLY0 (0xf0)
-+#define OFFSET_MSDC_DAT_RDDLY1 (0xf4)
-+#define OFFSET_MSDC_HW_DBG (0xf8)
-+#define OFFSET_MSDC_VERSION (0x100)
-+#define OFFSET_MSDC_ECO_VER (0x104)
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Address */
-+/*--------------------------------------------------------------------------*/
-+
-+/* common register */
-+#define MSDC_CFG REG_ADDR(MSDC_CFG)
-+#define MSDC_IOCON REG_ADDR(MSDC_IOCON)
-+#define MSDC_PS REG_ADDR(MSDC_PS)
-+#define MSDC_INT REG_ADDR(MSDC_INT)
-+#define MSDC_INTEN REG_ADDR(MSDC_INTEN)
-+#define MSDC_FIFOCS REG_ADDR(MSDC_FIFOCS)
-+#define MSDC_TXDATA REG_ADDR(MSDC_TXDATA)
-+#define MSDC_RXDATA REG_ADDR(MSDC_RXDATA)
-+#define MSDC_PATCH_BIT0 REG_ADDR(MSDC_PATCH_BIT)
-+
-+/* sdmmc register */
-+#define SDC_CFG REG_ADDR(SDC_CFG)
-+#define SDC_CMD REG_ADDR(SDC_CMD)
-+#define SDC_ARG REG_ADDR(SDC_ARG)
-+#define SDC_STS REG_ADDR(SDC_STS)
-+#define SDC_RESP0 REG_ADDR(SDC_RESP0)
-+#define SDC_RESP1 REG_ADDR(SDC_RESP1)
-+#define SDC_RESP2 REG_ADDR(SDC_RESP2)
-+#define SDC_RESP3 REG_ADDR(SDC_RESP3)
-+#define SDC_BLK_NUM REG_ADDR(SDC_BLK_NUM)
-+#define SDC_CSTS REG_ADDR(SDC_CSTS)
-+#define SDC_CSTS_EN REG_ADDR(SDC_CSTS_EN)
-+#define SDC_DCRC_STS REG_ADDR(SDC_DCRC_STS)
-+
-+/* emmc register*/
-+#define EMMC_CFG0 REG_ADDR(EMMC_CFG0)
-+#define EMMC_CFG1 REG_ADDR(EMMC_CFG1)
-+#define EMMC_STS REG_ADDR(EMMC_STS)
-+#define EMMC_IOCON REG_ADDR(EMMC_IOCON)
-+
-+/* auto command register */
-+#define SDC_ACMD_RESP REG_ADDR(SDC_ACMD_RESP)
-+#define SDC_ACMD19_TRG REG_ADDR(SDC_ACMD19_TRG)
-+#define SDC_ACMD19_STS REG_ADDR(SDC_ACMD19_STS)
-+
-+/* dma register */
-+#define MSDC_DMA_SA REG_ADDR(MSDC_DMA_SA)
-+#define MSDC_DMA_CA REG_ADDR(MSDC_DMA_CA)
-+#define MSDC_DMA_CTRL REG_ADDR(MSDC_DMA_CTRL)
-+#define MSDC_DMA_CFG REG_ADDR(MSDC_DMA_CFG)
-+
-+/* pad ctrl register */
-+#define MSDC_PAD_CTL0 REG_ADDR(MSDC_PAD_CTL0)
-+#define MSDC_PAD_CTL1 REG_ADDR(MSDC_PAD_CTL1)
-+#define MSDC_PAD_CTL2 REG_ADDR(MSDC_PAD_CTL2)
-+
-+/* data read delay */
-+#define MSDC_DAT_RDDLY0 REG_ADDR(MSDC_DAT_RDDLY0)
-+#define MSDC_DAT_RDDLY1 REG_ADDR(MSDC_DAT_RDDLY1)
-+
-+/* debug register */
-+#define MSDC_DBG_SEL REG_ADDR(MSDC_DBG_SEL)
-+#define MSDC_DBG_OUT REG_ADDR(MSDC_DBG_OUT)
-+
-+/* misc register */
-+#define MSDC_PATCH_BIT REG_ADDR(MSDC_PATCH_BIT)
-+#define MSDC_PATCH_BIT1 REG_ADDR(MSDC_PATCH_BIT1)
-+#define MSDC_PAD_TUNE REG_ADDR(MSDC_PAD_TUNE)
-+#define MSDC_HW_DBG REG_ADDR(MSDC_HW_DBG)
-+#define MSDC_VERSION REG_ADDR(MSDC_VERSION)
-+#define MSDC_ECO_VER REG_ADDR(MSDC_ECO_VER) /* ECO Version */
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Mask */
-+/*--------------------------------------------------------------------------*/
-+
-+/* MSDC_CFG mask */
-+#define MSDC_CFG_MODE (0x1 << 0) /* RW */
-+#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
-+#define MSDC_CFG_RST (0x1 << 2) /* RW */
-+#define MSDC_CFG_PIO (0x1 << 3) /* RW */
-+#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
-+#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
-+#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
-+#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
-+#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
-+#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
-+
-+/* MSDC_IOCON mask */
-+#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
-+#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
-+#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
-+#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
-+#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
-+#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
-+#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
-+#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
-+#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
-+#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
-+#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
-+#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
-+#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
-+#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
-+#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
-+
-+/* MSDC_PS mask */
-+#define MSDC_PS_CDEN (0x1 << 0) /* RW */
-+#define MSDC_PS_CDSTS (0x1 << 1) /* R */
-+#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
-+#define MSDC_PS_DAT (0xff << 16) /* R */
-+#define MSDC_PS_CMD (0x1 << 24) /* R */
-+#define MSDC_PS_WP (0x1UL<< 31) /* R */
-+
-+/* MSDC_INT mask */
-+#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
-+#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
-+#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
-+#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
-+#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
-+#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
-+#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
-+#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
-+#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
-+#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
-+#define MSDC_INT_CSTA (0x1 << 11) /* R */
-+#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
-+#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
-+#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
-+#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
-+#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
-+
-+/* MSDC_INTEN mask */
-+#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
-+#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
-+#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
-+#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
-+#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
-+#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
-+#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
-+#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
-+#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
-+#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
-+#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
-+#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
-+#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
-+#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
-+#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
-+#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
-+
-+/* MSDC_FIFOCS mask */
-+#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
-+#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
-+#define MSDC_FIFOCS_CLR (0x1UL<< 31) /* RW */
-+
-+/* SDC_CFG mask */
-+#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
-+#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
-+#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
-+#define SDC_CFG_SDIO (0x1 << 19) /* RW */
-+#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
-+#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
-+#define SDC_CFG_DTOC (0xffUL << 24) /* RW */
-+
-+/* SDC_CMD mask */
-+#define SDC_CMD_OPC (0x3f << 0) /* RW */
-+#define SDC_CMD_BRK (0x1 << 6) /* RW */
-+#define SDC_CMD_RSPTYP (0x7 << 7) /* RW */
-+#define SDC_CMD_DTYP (0x3 << 11) /* RW */
-+#define SDC_CMD_DTYP (0x3 << 11) /* RW */
-+#define SDC_CMD_RW (0x1 << 13) /* RW */
-+#define SDC_CMD_STOP (0x1 << 14) /* RW */
-+#define SDC_CMD_GOIRQ (0x1 << 15) /* RW */
-+#define SDC_CMD_BLKLEN (0xfff<< 16) /* RW */
-+#define SDC_CMD_AUTOCMD (0x3 << 28) /* RW */
-+#define SDC_CMD_VOLSWTH (0x1 << 30) /* RW */
-+
-+/* SDC_STS mask */
-+#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
-+#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
-+#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
-+
-+/* SDC_DCRC_STS mask */
-+#define SDC_DCRC_STS_NEG (0xf << 8) /* RO */
-+#define SDC_DCRC_STS_POS (0xff << 0) /* RO */
-+
-+/* EMMC_CFG0 mask */
-+#define EMMC_CFG0_BOOTSTART (0x1 << 0) /* W */
-+#define EMMC_CFG0_BOOTSTOP (0x1 << 1) /* W */
-+#define EMMC_CFG0_BOOTMODE (0x1 << 2) /* RW */
-+#define EMMC_CFG0_BOOTACKDIS (0x1 << 3) /* RW */
-+#define EMMC_CFG0_BOOTWDLY (0x7 << 12) /* RW */
-+#define EMMC_CFG0_BOOTSUPP (0x1 << 15) /* RW */
-+
-+/* EMMC_CFG1 mask */
-+#define EMMC_CFG1_BOOTDATTMC (0xfffff << 0) /* RW */
-+#define EMMC_CFG1_BOOTACKTMC (0xfffUL << 20) /* RW */
-+
-+/* EMMC_STS mask */
-+#define EMMC_STS_BOOTCRCERR (0x1 << 0) /* W1C */
-+#define EMMC_STS_BOOTACKERR (0x1 << 1) /* W1C */
-+#define EMMC_STS_BOOTDATTMO (0x1 << 2) /* W1C */
-+#define EMMC_STS_BOOTACKTMO (0x1 << 3) /* W1C */
-+#define EMMC_STS_BOOTUPSTATE (0x1 << 4) /* R */
-+#define EMMC_STS_BOOTACKRCV (0x1 << 5) /* W1C */
-+#define EMMC_STS_BOOTDATRCV (0x1 << 6) /* R */
-+
-+/* EMMC_IOCON mask */
-+#define EMMC_IOCON_BOOTRST (0x1 << 0) /* RW */
-+
-+/* SDC_ACMD19_TRG mask */
-+#define SDC_ACMD19_TRG_TUNESEL (0xf << 0) /* RW */
-+
-+/* MSDC_DMA_CTRL mask */
-+#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
-+#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
-+#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
-+#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
-+#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
-+#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
-+#define MSDC_DMA_CTRL_XFERSZ (0xffffUL << 16)/* RW */
-+
-+/* MSDC_DMA_CFG mask */
-+#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
-+#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
-+#define MSDC_DMA_CFG_BDCSERR (0x1 << 4) /* R */
-+#define MSDC_DMA_CFG_GPDCSERR (0x1 << 5) /* R */
-+
-+/* MSDC_PATCH_BIT mask */
-+#define MSDC_PATCH_BIT_WFLSMODE (0x1 << 0) /* RW */
-+#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
-+#define MSDC_PATCH_BIT_CKGEN_CK (0x1 << 6) /* E2: Fixed to 1 */
-+#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
-+#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
-+#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
-+#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
-+#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
-+#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
-+#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
-+#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
-+#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
-+
-+/* MSDC_PATCH_BIT1 mask */
-+#define MSDC_PATCH_BIT1_WRDAT_CRCS (0x7 << 3)
-+#define MSDC_PATCH_BIT1_CMD_RSP (0x7 << 0)
-+
-+/* MSDC_PAD_CTL0 mask */
-+#define MSDC_PAD_CTL0_CLKDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL0_CLKDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL0_CLKSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL0_CLKPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL0_CLKPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL0_CLKSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL0_CLKIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL0_CLKTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL0_CLKRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_CTL1 mask */
-+#define MSDC_PAD_CTL1_CMDDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL1_CMDDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL1_CMDSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL1_CMDPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL1_CMDPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL1_CMDSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL1_CMDIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL1_CMDTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL1_CMDRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_CTL2 mask */
-+#define MSDC_PAD_CTL2_DATDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL2_DATDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL2_DATSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL2_DATPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL2_DATPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL2_DATIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL2_DATSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL2_DATTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL2_DATRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_TUNE mask */
-+#define MSDC_PAD_TUNE_DATWRDLY (0x1F << 0) /* RW */
-+#define MSDC_PAD_TUNE_DATRRDLY (0x1F << 8) /* RW */
-+#define MSDC_PAD_TUNE_CMDRDLY (0x1F << 16) /* RW */
-+#define MSDC_PAD_TUNE_CMDRRDLY (0x1FUL << 22) /* RW */
-+#define MSDC_PAD_TUNE_CLKTXDLY (0x1FUL << 27) /* RW */
-+
-+/* MSDC_DAT_RDDLY0/1 mask */
-+#define MSDC_DAT_RDDLY0_D0 (0x1F << 0) /* RW */
-+#define MSDC_DAT_RDDLY0_D1 (0x1F << 8) /* RW */
-+#define MSDC_DAT_RDDLY0_D2 (0x1F << 16) /* RW */
-+#define MSDC_DAT_RDDLY0_D3 (0x1F << 24) /* RW */
-+
-+#define MSDC_DAT_RDDLY1_D4 (0x1F << 0) /* RW */
-+#define MSDC_DAT_RDDLY1_D5 (0x1F << 8) /* RW */
-+#define MSDC_DAT_RDDLY1_D6 (0x1F << 16) /* RW */
-+#define MSDC_DAT_RDDLY1_D7 (0x1F << 24) /* RW */
-+
-+#define MSDC_CKGEN_MSDC_DLY_SEL (0x1F<<10)
-+#define MSDC_INT_DAT_LATCH_CK_SEL (0x7<<7)
-+#define MSDC_CKGEN_MSDC_CK_SEL (0x1<<6)
-+#define CARD_READY_FOR_DATA (1<<8)
-+#define CARD_CURRENT_STATE(x) ((x&0x00001E00)>>9)
-+
-+/*--------------------------------------------------------------------------*/
-+/* Descriptor Structure */
-+/*--------------------------------------------------------------------------*/
-+typedef struct {
-+ u32 hwo:1; /* could be changed by hw */
-+ u32 bdp:1;
-+ u32 rsv0:6;
-+ u32 chksum:8;
-+ u32 intr:1;
-+ u32 rsv1:15;
-+ void *next;
-+ void *ptr;
-+ u32 buflen:16;
-+ u32 extlen:8;
-+ u32 rsv2:8;
-+ u32 arg;
-+ u32 blknum;
-+ u32 cmd;
-+} gpd_t;
-+
-+typedef struct {
-+ u32 eol:1;
-+ u32 rsv0:7;
-+ u32 chksum:8;
-+ u32 rsv1:1;
-+ u32 blkpad:1;
-+ u32 dwpad:1;
-+ u32 rsv2:13;
-+ void *next;
-+ void *ptr;
-+ u32 buflen:16;
-+ u32 rsv3:16;
-+} bd_t;
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Debugging Structure */
-+/*--------------------------------------------------------------------------*/
-+
-+typedef struct {
-+ u32 msdc:1;
-+ u32 ckpwn:1;
-+ u32 rst:1;
-+ u32 pio:1;
-+ u32 ckdrven:1;
-+ u32 start18v:1;
-+ u32 pass18v:1;
-+ u32 ckstb:1;
-+ u32 ckdiv:8;
-+ u32 ckmod:2;
-+ u32 pad:14;
-+} msdc_cfg_reg;
-+typedef struct {
-+ u32 sdr104cksel:1;
-+ u32 rsmpl:1;
-+ u32 dsmpl:1;
-+ u32 ddlysel:1;
-+ u32 ddr50ckd:1;
-+ u32 dsplsel:1;
-+ u32 pad1:10;
-+ u32 d0spl:1;
-+ u32 d1spl:1;
-+ u32 d2spl:1;
-+ u32 d3spl:1;
-+ u32 d4spl:1;
-+ u32 d5spl:1;
-+ u32 d6spl:1;
-+ u32 d7spl:1;
-+ u32 riscsz:1;
-+ u32 pad2:7;
-+} msdc_iocon_reg;
-+typedef struct {
-+ u32 cden:1;
-+ u32 cdsts:1;
-+ u32 pad1:10;
-+ u32 cddebounce:4;
-+ u32 dat:8;
-+ u32 cmd:1;
-+ u32 pad2:6;
-+ u32 wp:1;
-+} msdc_ps_reg;
-+typedef struct {
-+ u32 mmcirq:1;
-+ u32 cdsc:1;
-+ u32 pad1:1;
-+ u32 atocmdrdy:1;
-+ u32 atocmdtmo:1;
-+ u32 atocmdcrc:1;
-+ u32 dmaqempty:1;
-+ u32 sdioirq:1;
-+ u32 cmdrdy:1;
-+ u32 cmdtmo:1;
-+ u32 rspcrc:1;
-+ u32 csta:1;
-+ u32 xfercomp:1;
-+ u32 dxferdone:1;
-+ u32 dattmo:1;
-+ u32 datcrc:1;
-+ u32 atocmd19done:1;
-+ u32 pad2:15;
-+} msdc_int_reg;
-+typedef struct {
-+ u32 mmcirq:1;
-+ u32 cdsc:1;
-+ u32 pad1:1;
-+ u32 atocmdrdy:1;
-+ u32 atocmdtmo:1;
-+ u32 atocmdcrc:1;
-+ u32 dmaqempty:1;
-+ u32 sdioirq:1;
-+ u32 cmdrdy:1;
-+ u32 cmdtmo:1;
-+ u32 rspcrc:1;
-+ u32 csta:1;
-+ u32 xfercomp:1;
-+ u32 dxferdone:1;
-+ u32 dattmo:1;
-+ u32 datcrc:1;
-+ u32 atocmd19done:1;
-+ u32 pad2:15;
-+} msdc_inten_reg;
-+typedef struct {
-+ u32 rxcnt:8;
-+ u32 pad1:8;
-+ u32 txcnt:8;
-+ u32 pad2:7;
-+ u32 clr:1;
-+} msdc_fifocs_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_txdat_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_rxdat_reg;
-+typedef struct {
-+ u32 sdiowkup:1;
-+ u32 inswkup:1;
-+ u32 pad1:14;
-+ u32 buswidth:2;
-+ u32 pad2:1;
-+ u32 sdio:1;
-+ u32 sdioide:1;
-+ u32 intblkgap:1;
-+ u32 pad4:2;
-+ u32 dtoc:8;
-+} sdc_cfg_reg;
-+typedef struct {
-+ u32 cmd:6;
-+ u32 brk:1;
-+ u32 rsptyp:3;
-+ u32 pad1:1;
-+ u32 dtype:2;
-+ u32 rw:1;
-+ u32 stop:1;
-+ u32 goirq:1;
-+ u32 blklen:12;
-+ u32 atocmd:2;
-+ u32 volswth:1;
-+ u32 pad2:1;
-+} sdc_cmd_reg;
-+typedef struct {
-+ u32 arg;
-+} sdc_arg_reg;
-+typedef struct {
-+ u32 sdcbusy:1;
-+ u32 cmdbusy:1;
-+ u32 pad:29;
-+ u32 swrcmpl:1;
-+} sdc_sts_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp0_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp1_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp2_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp3_reg;
-+typedef struct {
-+ u32 num;
-+} sdc_blknum_reg;
-+typedef struct {
-+ u32 sts;
-+} sdc_csts_reg;
-+typedef struct {
-+ u32 sts;
-+} sdc_cstsen_reg;
-+typedef struct {
-+ u32 datcrcsts:8;
-+ u32 ddrcrcsts:4;
-+ u32 pad:20;
-+} sdc_datcrcsts_reg;
-+typedef struct {
-+ u32 bootstart:1;
-+ u32 bootstop:1;
-+ u32 bootmode:1;
-+ u32 pad1:9;
-+ u32 bootwaidly:3;
-+ u32 bootsupp:1;
-+ u32 pad2:16;
-+} emmc_cfg0_reg;
-+typedef struct {
-+ u32 bootcrctmc:16;
-+ u32 pad:4;
-+ u32 bootacktmc:12;
-+} emmc_cfg1_reg;
-+typedef struct {
-+ u32 bootcrcerr:1;
-+ u32 bootackerr:1;
-+ u32 bootdattmo:1;
-+ u32 bootacktmo:1;
-+ u32 bootupstate:1;
-+ u32 bootackrcv:1;
-+ u32 bootdatrcv:1;
-+ u32 pad:25;
-+} emmc_sts_reg;
-+typedef struct {
-+ u32 bootrst:1;
-+ u32 pad:31;
-+} emmc_iocon_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_acmd_resp_reg;
-+typedef struct {
-+ u32 tunesel:4;
-+ u32 pad:28;
-+} msdc_acmd19_trg_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_acmd19_sts_reg;
-+typedef struct {
-+ u32 addr;
-+} msdc_dma_sa_reg;
-+typedef struct {
-+ u32 addr;
-+} msdc_dma_ca_reg;
-+typedef struct {
-+ u32 start:1;
-+ u32 stop:1;
-+ u32 resume:1;
-+ u32 pad1:5;
-+ u32 mode:1;
-+ u32 pad2:1;
-+ u32 lastbuf:1;
-+ u32 pad3:1;
-+ u32 brustsz:3;
-+ u32 pad4:1;
-+ u32 xfersz:16;
-+} msdc_dma_ctrl_reg;
-+typedef struct {
-+ u32 status:1;
-+ u32 decsen:1;
-+ u32 pad1:2;
-+ u32 bdcsen:1;
-+ u32 gpdcsen:1;
-+ u32 pad2:26;
-+} msdc_dma_cfg_reg;
-+typedef struct {
-+ u32 sel:16;
-+ u32 pad2:16;
-+} msdc_dbg_sel_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_dbg_out_reg;
-+typedef struct {
-+ u32 clkdrvn:3;
-+ u32 rsv0:1;
-+ u32 clkdrvp:3;
-+ u32 rsv1:1;
-+ u32 clksr:1;
-+ u32 rsv2:7;
-+ u32 clkpd:1;
-+ u32 clkpu:1;
-+ u32 clksmt:1;
-+ u32 clkies:1;
-+ u32 clktdsel:4;
-+ u32 clkrdsel:8;
-+} msdc_pad_ctl0_reg;
-+typedef struct {
-+ u32 cmddrvn:3;
-+ u32 rsv0:1;
-+ u32 cmddrvp:3;
-+ u32 rsv1:1;
-+ u32 cmdsr:1;
-+ u32 rsv2:7;
-+ u32 cmdpd:1;
-+ u32 cmdpu:1;
-+ u32 cmdsmt:1;
-+ u32 cmdies:1;
-+ u32 cmdtdsel:4;
-+ u32 cmdrdsel:8;
-+} msdc_pad_ctl1_reg;
-+typedef struct {
-+ u32 datdrvn:3;
-+ u32 rsv0:1;
-+ u32 datdrvp:3;
-+ u32 rsv1:1;
-+ u32 datsr:1;
-+ u32 rsv2:7;
-+ u32 datpd:1;
-+ u32 datpu:1;
-+ u32 datsmt:1;
-+ u32 daties:1;
-+ u32 dattdsel:4;
-+ u32 datrdsel:8;
-+} msdc_pad_ctl2_reg;
-+typedef struct {
-+ u32 wrrxdly:3;
-+ u32 pad1:5;
-+ u32 rdrxdly:8;
-+ u32 pad2:16;
-+} msdc_pad_tune_reg;
-+typedef struct {
-+ u32 dat0:5;
-+ u32 rsv0:3;
-+ u32 dat1:5;
-+ u32 rsv1:3;
-+ u32 dat2:5;
-+ u32 rsv2:3;
-+ u32 dat3:5;
-+ u32 rsv3:3;
-+} msdc_dat_rddly0;
-+typedef struct {
-+ u32 dat4:5;
-+ u32 rsv4:3;
-+ u32 dat5:5;
-+ u32 rsv5:3;
-+ u32 dat6:5;
-+ u32 rsv6:3;
-+ u32 dat7:5;
-+ u32 rsv7:3;
-+} msdc_dat_rddly1;
-+typedef struct {
-+ u32 dbg0sel:8;
-+ u32 dbg1sel:6;
-+ u32 pad1:2;
-+ u32 dbg2sel:6;
-+ u32 pad2:2;
-+ u32 dbg3sel:6;
-+ u32 pad3:2;
-+} msdc_hw_dbg_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_version_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_eco_ver_reg;
-+
-+struct msdc_regs {
-+ msdc_cfg_reg msdc_cfg; /* base+0x00h */
-+ msdc_iocon_reg msdc_iocon; /* base+0x04h */
-+ msdc_ps_reg msdc_ps; /* base+0x08h */
-+ msdc_int_reg msdc_int; /* base+0x0ch */
-+ msdc_inten_reg msdc_inten; /* base+0x10h */
-+ msdc_fifocs_reg msdc_fifocs; /* base+0x14h */
-+ msdc_txdat_reg msdc_txdat; /* base+0x18h */
-+ msdc_rxdat_reg msdc_rxdat; /* base+0x1ch */
-+ u32 rsv1[4];
-+ sdc_cfg_reg sdc_cfg; /* base+0x30h */
-+ sdc_cmd_reg sdc_cmd; /* base+0x34h */
-+ sdc_arg_reg sdc_arg; /* base+0x38h */
-+ sdc_sts_reg sdc_sts; /* base+0x3ch */
-+ sdc_resp0_reg sdc_resp0; /* base+0x40h */
-+ sdc_resp1_reg sdc_resp1; /* base+0x44h */
-+ sdc_resp2_reg sdc_resp2; /* base+0x48h */
-+ sdc_resp3_reg sdc_resp3; /* base+0x4ch */
-+ sdc_blknum_reg sdc_blknum; /* base+0x50h */
-+ u32 rsv2[1];
-+ sdc_csts_reg sdc_csts; /* base+0x58h */
-+ sdc_cstsen_reg sdc_cstsen; /* base+0x5ch */
-+ sdc_datcrcsts_reg sdc_dcrcsta; /* base+0x60h */
-+ u32 rsv3[3];
-+ emmc_cfg0_reg emmc_cfg0; /* base+0x70h */
-+ emmc_cfg1_reg emmc_cfg1; /* base+0x74h */
-+ emmc_sts_reg emmc_sts; /* base+0x78h */
-+ emmc_iocon_reg emmc_iocon; /* base+0x7ch */
-+ msdc_acmd_resp_reg acmd_resp; /* base+0x80h */
-+ msdc_acmd19_trg_reg acmd19_trg; /* base+0x84h */
-+ msdc_acmd19_sts_reg acmd19_sts; /* base+0x88h */
-+ u32 rsv4[1];
-+ msdc_dma_sa_reg dma_sa; /* base+0x90h */
-+ msdc_dma_ca_reg dma_ca; /* base+0x94h */
-+ msdc_dma_ctrl_reg dma_ctrl; /* base+0x98h */
-+ msdc_dma_cfg_reg dma_cfg; /* base+0x9ch */
-+ msdc_dbg_sel_reg dbg_sel; /* base+0xa0h */
-+ msdc_dbg_out_reg dbg_out; /* base+0xa4h */
-+ u32 rsv5[2];
-+ u32 patch0; /* base+0xb0h */
-+ u32 patch1; /* base+0xb4h */
-+ u32 rsv6[10];
-+ msdc_pad_ctl0_reg pad_ctl0; /* base+0xe0h */
-+ msdc_pad_ctl1_reg pad_ctl1; /* base+0xe4h */
-+ msdc_pad_ctl2_reg pad_ctl2; /* base+0xe8h */
-+ msdc_pad_tune_reg pad_tune; /* base+0xech */
-+ msdc_dat_rddly0 dat_rddly0; /* base+0xf0h */
-+ msdc_dat_rddly1 dat_rddly1; /* base+0xf4h */
-+ msdc_hw_dbg_reg hw_dbg; /* base+0xf8h */
-+ u32 rsv7[1];
-+ msdc_version_reg version; /* base+0x100h */
-+ msdc_eco_ver_reg eco_ver; /* base+0x104h */
-+};
-+
-+struct scatterlist_ex {
-+ u32 cmd;
-+ u32 arg;
-+ u32 sglen;
-+ struct scatterlist *sg;
-+};
-+
-+#define DMA_FLAG_NONE (0x00000000)
-+#define DMA_FLAG_EN_CHKSUM (0x00000001)
-+#define DMA_FLAG_PAD_BLOCK (0x00000002)
-+#define DMA_FLAG_PAD_DWORD (0x00000004)
-+
-+struct msdc_dma {
-+ u32 flags; /* flags */
-+ u32 xfersz; /* xfer size in bytes */
-+ u32 sglen; /* size of scatter list */
-+ u32 blklen; /* block size */
-+ struct scatterlist *sg; /* I/O scatter list */
-+ struct scatterlist_ex *esg; /* extended I/O scatter list */
-+ u8 mode; /* dma mode */
-+ u8 burstsz; /* burst size */
-+ u8 intr; /* dma done interrupt */
-+ u8 padding; /* padding */
-+ u32 cmd; /* enhanced mode command */
-+ u32 arg; /* enhanced mode arg */
-+ u32 rsp; /* enhanced mode command response */
-+ u32 autorsp; /* auto command response */
-+
-+ gpd_t *gpd; /* pointer to gpd array */
-+ bd_t *bd; /* pointer to bd array */
-+ dma_addr_t gpd_addr; /* the physical address of gpd array */
-+ dma_addr_t bd_addr; /* the physical address of bd array */
-+ u32 used_gpd; /* the number of used gpd elements */
-+ u32 used_bd; /* the number of used bd elements */
-+};
-+
-+struct msdc_host
-+{
-+ struct msdc_hw *hw;
-+
-+ struct mmc_host *mmc; /* mmc structure */
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ struct mmc_request *mrq;
-+ int cmd_rsp;
-+ int cmd_rsp_done;
-+ int cmd_r1b_done;
-+
-+ int error;
-+ spinlock_t lock; /* mutex */
-+ struct semaphore sem;
-+
-+ u32 blksz; /* host block size */
-+ u32 base; /* host base address */
-+ int id; /* host id */
-+ int pwr_ref; /* core power reference count */
-+
-+ u32 xfer_size; /* total transferred size */
-+
-+ struct msdc_dma dma; /* dma channel */
-+ u32 dma_addr; /* dma transfer address */
-+ u32 dma_left_size; /* dma transfer left size */
-+ u32 dma_xfer_size; /* dma transfer size in bytes */
-+ int dma_xfer; /* dma transfer mode */
-+
-+ u32 timeout_ns; /* data timeout ns */
-+ u32 timeout_clks; /* data timeout clks */
-+
-+ atomic_t abort; /* abort transfer */
-+
-+ int irq; /* host interrupt */
-+
-+ struct tasklet_struct card_tasklet;
-+
-+ struct completion cmd_done;
-+ struct completion xfer_done;
-+ struct pm_message pm_state;
-+
-+ u32 mclk; /* mmc subsystem clock */
-+ u32 hclk; /* host clock speed */
-+ u32 sclk; /* SD/MS clock speed */
-+ u8 core_clkon; /* Host core clock on ? */
-+ u8 card_clkon; /* Card clock on ? */
-+ u8 core_power; /* core power */
-+ u8 power_mode; /* host power mode */
-+ u8 card_inserted; /* card inserted ? */
-+ u8 suspend; /* host suspended ? */
-+ u8 reserved;
-+ u8 app_cmd; /* for app command */
-+ u32 app_cmd_arg;
-+ u64 starttime;
-+};
-+
-+static inline unsigned int uffs(unsigned int x)
-+{
-+ unsigned int r = 1;
-+
-+ if (!x)
-+ return 0;
-+ if (!(x & 0xffff)) {
-+ x >>= 16;
-+ r += 16;
-+ }
-+ if (!(x & 0xff)) {
-+ x >>= 8;
-+ r += 8;
-+ }
-+ if (!(x & 0xf)) {
-+ x >>= 4;
-+ r += 4;
-+ }
-+ if (!(x & 3)) {
-+ x >>= 2;
-+ r += 2;
-+ }
-+ if (!(x & 1)) {
-+ x >>= 1;
-+ r += 1;
-+ }
-+ return r;
-+}
-+#define sdr_read8(reg) __raw_readb(reg)
-+#define sdr_read16(reg) __raw_readw(reg)
-+#define sdr_read32(reg) __raw_readl(reg)
-+#define sdr_write8(reg,val) __raw_writeb(val,reg)
-+#define sdr_write16(reg,val) __raw_writew(val,reg)
-+#define sdr_write32(reg,val) __raw_writel(val,reg)
-+
-+#define sdr_set_bits(reg,bs) ((*(volatile u32*)(reg)) |= (u32)(bs))
-+#define sdr_clr_bits(reg,bs) ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
-+
-+#define sdr_set_field(reg,field,val) \
-+ do { \
-+ volatile unsigned int tv = sdr_read32(reg); \
-+ tv &= ~(field); \
-+ tv |= ((val) << (uffs((unsigned int)field) - 1)); \
-+ sdr_write32(reg,tv); \
-+ } while(0)
-+#define sdr_get_field(reg,field,val) \
-+ do { \
-+ volatile unsigned int tv = sdr_read32(reg); \
-+ val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
-+ } while(0)
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/mmc/host/sdhci-mt7620.c
-@@ -0,0 +1,2314 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ *
-+ * MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/timer.h>
-+#include <linux/ioport.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/blkdev.h>
-+#include <linux/slab.h>
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/card.h>
-+#include <linux/mmc/core.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/sd.h>
-+#include <linux/mmc/sdio.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/version.h>
-+#include <linux/pm.h>
-+
-+#define MSDC_SMPL_FALLING (1)
-+#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
-+#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
-+#define MSDC_REMOVABLE (1 << 5) /* removable slot */
-+#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
-+#define MSDC_HIGHSPEED (1 << 7)
-+
-+#define IRQ_SDC 22
-+
-+#include <asm/dma.h>
-+
-+#include "mt6575_sd.h"
-+
-+#define DRV_NAME "mtk-sd"
-+
-+#define HOST_MAX_NUM (1) /* +/- by chhung */
-+
-+#define HOST_MAX_MCLK (48000000) /* +/- by chhung */
-+#define HOST_MIN_MCLK (260000)
-+
-+#define HOST_MAX_BLKSZ (2048)
-+
-+#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
-+
-+#define GPIO_PULL_DOWN (0)
-+#define GPIO_PULL_UP (1)
-+
-+#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
-+#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
-+
-+#define CMD_TIMEOUT (HZ/10) /* 100ms */
-+#define DAT_TIMEOUT (HZ/2 * 5) /* 500ms x5 */
-+
-+#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/
-+
-+#define MAX_GPD_NUM (1 + 1) /* one null gpd */
-+#define MAX_BD_NUM (1024)
-+#define MAX_BD_PER_GPD (MAX_BD_NUM)
-+
-+#define MAX_HW_SGMTS (MAX_BD_NUM)
-+#define MAX_PHY_SGMTS (MAX_BD_NUM)
-+#define MAX_SGMT_SZ (MAX_DMA_CNT)
-+#define MAX_REQ_SZ (MAX_SGMT_SZ * 8)
-+
-+#ifdef MT6575_SD_DEBUG
-+static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
-+#endif
-+
-+//=================================
-+#define PERI_MSDC0_PDN (15)
-+//#define PERI_MSDC1_PDN (16)
-+//#define PERI_MSDC2_PDN (17)
-+//#define PERI_MSDC3_PDN (18)
-+
-+struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
-+
-+struct msdc_hw msdc0_hw = {
-+ .clk_src = 0,
-+ .cmd_edge = MSDC_SMPL_FALLING,
-+ .data_edge = MSDC_SMPL_FALLING,
-+ .clk_drv = 4,
-+ .cmd_drv = 4,
-+ .dat_drv = 4,
-+ .data_pins = 4,
-+ .data_offset = 0,
-+ .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
-+};
-+
-+static struct resource mtk_sd_resources[] = {
-+ [0] = {
-+ .start = 0xb0130000,
-+ .end = 0xb0133fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_SDC, /*FIXME*/
-+ .end = IRQ_SDC, /*FIXME*/
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device mtk_sd_device = {
-+ .name = "mtk-sd",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(mtk_sd_resources),
-+ .resource = mtk_sd_resources,
-+};
-+/* end of +++ */
-+
-+static int msdc_rsp[] = {
-+ 0, /* RESP_NONE */
-+ 1, /* RESP_R1 */
-+ 2, /* RESP_R2 */
-+ 3, /* RESP_R3 */
-+ 4, /* RESP_R4 */
-+ 1, /* RESP_R5 */
-+ 1, /* RESP_R6 */
-+ 1, /* RESP_R7 */
-+ 7, /* RESP_R1b */
-+};
-+
-+/* For Inhanced DMA */
-+#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
-+ do { \
-+ ((gpd_t*)gpd)->extlen = extlen; \
-+ ((gpd_t*)gpd)->cmd = cmd; \
-+ ((gpd_t*)gpd)->arg = arg; \
-+ ((gpd_t*)gpd)->blknum = blknum; \
-+ }while(0)
-+
-+#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
-+ do { \
-+ BUG_ON(dlen > 0xFFFFUL); \
-+ ((bd_t*)bd)->blkpad = blkpad; \
-+ ((bd_t*)bd)->dwpad = dwpad; \
-+ ((bd_t*)bd)->ptr = (void*)dptr; \
-+ ((bd_t*)bd)->buflen = dlen; \
-+ }while(0)
-+
-+#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
-+#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
-+#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v))
-+#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v))
-+#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA)
-+#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA)
-+
-+
-+#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
-+#define msdc_dma_off() sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
-+
-+#define msdc_retry(expr,retry,cnt) \
-+ do { \
-+ int backup = cnt; \
-+ while (retry) { \
-+ if (!(expr)) break; \
-+ if (cnt-- == 0) { \
-+ retry--; mdelay(1); cnt = backup; \
-+ } \
-+ } \
-+ WARN_ON(retry == 0); \
-+ } while(0)
-+
-+#if 0 /* +/- chhung */
-+#define msdc_reset() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
-+ dsb(); \
-+ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
-+ } while(0)
-+#else
-+#define msdc_reset() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
-+ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
-+ } while(0)
-+#endif /* end of +/- */
-+
-+#define msdc_clr_int() \
-+ do { \
-+ volatile u32 val = sdr_read32(MSDC_INT); \
-+ sdr_write32(MSDC_INT, val); \
-+ } while(0)
-+
-+#define msdc_clr_fifo() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
-+ msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
-+ } while(0)
-+
-+#define msdc_irq_save(val) \
-+ do { \
-+ val = sdr_read32(MSDC_INTEN); \
-+ sdr_clr_bits(MSDC_INTEN, val); \
-+ } while(0)
-+
-+#define msdc_irq_restore(val) \
-+ do { \
-+ sdr_set_bits(MSDC_INTEN, val); \
-+ } while(0)
-+
-+/* clock source for host: global */
-+static u32 hclks[] = {48000000}; /* +/- by chhung */
-+
-+//============================================
-+// the power for msdc host controller: global
-+// always keep the VMC on.
-+//============================================
-+#define msdc_vcore_on(host) \
-+ do { \
-+ printk("[+]VMC ref. count<%d>\n", ++host->pwr_ref); \
-+ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
-+ } while (0)
-+#define msdc_vcore_off(host) \
-+ do { \
-+ printk("[-]VMC ref. count<%d>\n", --host->pwr_ref); \
-+ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
-+ } while (0)
-+
-+//====================================
-+// the vdd output for card: global
-+// always keep the VMCH on.
-+//====================================
-+#define msdc_vdd_on(host) \
-+ do { \
-+ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
-+ } while (0)
-+#define msdc_vdd_off(host) \
-+ do { \
-+ (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
-+ } while (0)
-+
-+#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
-+#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
-+
-+#define sdc_send_cmd(cmd,arg) \
-+ do { \
-+ sdr_write32(SDC_ARG, (arg)); \
-+ sdr_write32(SDC_CMD, (cmd)); \
-+ } while(0)
-+
-+// can modify to read h/w register.
-+//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
-+#define is_card_present(h) (((struct msdc_host*)(h))->card_inserted)
-+
-+/* +++ chhung */
-+#ifndef __ASSEMBLY__
-+#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-+#else
-+#define PHYSADDR(a) ((a) & 0x1fffffff)
-+#endif
-+/* end of +++ */
-+static unsigned int msdc_do_command(struct msdc_host *host,
-+ struct mmc_command *cmd,
-+ int tune,
-+ unsigned long timeout);
-+
-+static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
-+
-+#ifdef MT6575_SD_DEBUG
-+static void msdc_dump_card_status(struct msdc_host *host, u32 status)
-+{
-+ static char *state[] = {
-+ "Idle", /* 0 */
-+ "Ready", /* 1 */
-+ "Ident", /* 2 */
-+ "Stby", /* 3 */
-+ "Tran", /* 4 */
-+ "Data", /* 5 */
-+ "Rcv", /* 6 */
-+ "Prg", /* 7 */
-+ "Dis", /* 8 */
-+ "Reserved", /* 9 */
-+ "Reserved", /* 10 */
-+ "Reserved", /* 11 */
-+ "Reserved", /* 12 */
-+ "Reserved", /* 13 */
-+ "Reserved", /* 14 */
-+ "I/O mode", /* 15 */
-+ };
-+ if (status & R1_OUT_OF_RANGE)
-+ printk("[CARD_STATUS] Out of Range\n");
-+ if (status & R1_ADDRESS_ERROR)
-+ printk("[CARD_STATUS] Address Error\n");
-+ if (status & R1_BLOCK_LEN_ERROR)
-+ printk("[CARD_STATUS] Block Len Error\n");
-+ if (status & R1_ERASE_SEQ_ERROR)
-+ printk("[CARD_STATUS] Erase Seq Error\n");
-+ if (status & R1_ERASE_PARAM)
-+ printk("[CARD_STATUS] Erase Param\n");
-+ if (status & R1_WP_VIOLATION)
-+ printk("[CARD_STATUS] WP Violation\n");
-+ if (status & R1_CARD_IS_LOCKED)
-+ printk("[CARD_STATUS] Card is Locked\n");
-+ if (status & R1_LOCK_UNLOCK_FAILED)
-+ printk("[CARD_STATUS] Lock/Unlock Failed\n");
-+ if (status & R1_COM_CRC_ERROR)
-+ printk("[CARD_STATUS] Command CRC Error\n");
-+ if (status & R1_ILLEGAL_COMMAND)
-+ printk("[CARD_STATUS] Illegal Command\n");
-+ if (status & R1_CARD_ECC_FAILED)
-+ printk("[CARD_STATUS] Card ECC Failed\n");
-+ if (status & R1_CC_ERROR)
-+ printk("[CARD_STATUS] CC Error\n");
-+ if (status & R1_ERROR)
-+ printk("[CARD_STATUS] Error\n");
-+ if (status & R1_UNDERRUN)
-+ printk("[CARD_STATUS] Underrun\n");
-+ if (status & R1_OVERRUN)
-+ printk("[CARD_STATUS] Overrun\n");
-+ if (status & R1_CID_CSD_OVERWRITE)
-+ printk("[CARD_STATUS] CID/CSD Overwrite\n");
-+ if (status & R1_WP_ERASE_SKIP)
-+ printk("[CARD_STATUS] WP Eraser Skip\n");
-+ if (status & R1_CARD_ECC_DISABLED)
-+ printk("[CARD_STATUS] Card ECC Disabled\n");
-+ if (status & R1_ERASE_RESET)
-+ printk("[CARD_STATUS] Erase Reset\n");
-+ if (status & R1_READY_FOR_DATA)
-+ printk("[CARD_STATUS] Ready for Data\n");
-+ if (status & R1_SWITCH_ERROR)
-+ printk("[CARD_STATUS] Switch error\n");
-+ if (status & R1_APP_CMD)
-+ printk("[CARD_STATUS] App Command\n");
-+
-+ printk("[CARD_STATUS] '%s' State\n", state[R1_CURRENT_STATE(status)]);
-+}
-+
-+static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
-+{
-+ if (resp & (1 << 7))
-+ printk("[OCR] Low Voltage Range\n");
-+ if (resp & (1 << 15))
-+ printk("[OCR] 2.7-2.8 volt\n");
-+ if (resp & (1 << 16))
-+ printk("[OCR] 2.8-2.9 volt\n");
-+ if (resp & (1 << 17))
-+ printk("[OCR] 2.9-3.0 volt\n");
-+ if (resp & (1 << 18))
-+ printk("[OCR] 3.0-3.1 volt\n");
-+ if (resp & (1 << 19))
-+ printk("[OCR] 3.1-3.2 volt\n");
-+ if (resp & (1 << 20))
-+ printk("[OCR] 3.2-3.3 volt\n");
-+ if (resp & (1 << 21))
-+ printk("[OCR] 3.3-3.4 volt\n");
-+ if (resp & (1 << 22))
-+ printk("[OCR] 3.4-3.5 volt\n");
-+ if (resp & (1 << 23))
-+ printk("[OCR] 3.5-3.6 volt\n");
-+ if (resp & (1 << 24))
-+ printk("[OCR] Switching to 1.8V Accepted (S18A)\n");
-+ if (resp & (1 << 30))
-+ printk("[OCR] Card Capacity Status (CCS)\n");
-+ if (resp & (1 << 31))
-+ printk("[OCR] Card Power Up Status (Idle)\n");
-+ else
-+ printk("[OCR] Card Power Up Status (Busy)\n");
-+}
-+
-+static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
-+{
-+ u32 status = (((resp >> 15) & 0x1) << 23) |
-+ (((resp >> 14) & 0x1) << 22) |
-+ (((resp >> 13) & 0x1) << 19) |
-+ (resp & 0x1fff);
-+
-+ printk("[RCA] 0x%.4x\n", resp >> 16);
-+
-+ msdc_dump_card_status(host, status);
-+}
-+
-+static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
-+{
-+ u32 flags = (resp >> 8) & 0xFF;
-+ char *state[] = {"DIS", "CMD", "TRN", "RFU"};
-+
-+ if (flags & (1 << 7))
-+ printk("[IO] COM_CRC_ERR\n");
-+ if (flags & (1 << 6))
-+ printk("[IO] Illgal command\n");
-+ if (flags & (1 << 3))
-+ printk("[IO] Error\n");
-+ if (flags & (1 << 2))
-+ printk("[IO] RFU\n");
-+ if (flags & (1 << 1))
-+ printk("[IO] Function number error\n");
-+ if (flags & (1 << 0))
-+ printk("[IO] Out of range\n");
-+
-+ printk("[IO] State: %s, Data:0x%x\n", state[(resp >> 12) & 0x3], resp & 0xFF);
-+}
-+#endif
-+
-+static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
-+{
-+ u32 base = host->base;
-+ u32 timeout, clk_ns;
-+
-+ host->timeout_ns = ns;
-+ host->timeout_clks = clks;
-+
-+ clk_ns = 1000000000UL / host->sclk;
-+ timeout = ns / clk_ns + clks;
-+ timeout = timeout >> 16; /* in 65536 sclk cycle unit */
-+ timeout = timeout > 1 ? timeout - 1 : 0;
-+ timeout = timeout > 255 ? 255 : timeout;
-+
-+ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
-+
-+/* printk("Set read data timeout: %dns %dclks -> %d x 65536 cycles\n",
-+ ns, clks, timeout + 1);*/
-+}
-+
-+static void msdc_eirq_sdio(void *data)
-+{
-+ struct msdc_host *host = (struct msdc_host *)data;
-+
-+// printk("SDIO EINT\n");
-+
-+ mmc_signal_sdio_irq(host->mmc);
-+}
-+
-+static void msdc_eirq_cd(void *data)
-+{
-+ struct msdc_host *host = (struct msdc_host *)data;
-+
-+// printk("CD EINT\n");
-+
-+ tasklet_hi_schedule(&host->card_tasklet);
-+}
-+
-+static void msdc_tasklet_card(unsigned long arg)
-+{
-+ struct msdc_host *host = (struct msdc_host *)arg;
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ u32 inserted;
-+ u32 status = 0;
-+
-+ spin_lock(&host->lock);
-+
-+ if (hw->get_cd_status) {
-+ inserted = hw->get_cd_status();
-+ } else {
-+ status = sdr_read32(MSDC_PS);
-+ inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
-+ }
-+
-+ host->card_inserted = inserted;
-+
-+ if (!host->suspend) {
-+ host->mmc->f_max = HOST_MAX_MCLK;
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
-+ }
-+
-+// printk("card found<%s>\n", inserted ? "inserted" : "removed");
-+
-+ spin_unlock(&host->lock);
-+}
-+
-+static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
-+{
-+ u32 base = host->base;
-+ u32 hclk = host->hclk;
-+ u32 mode, flags, div, sclk;
-+
-+ if (!hz) {
-+// printk("set mclk to 0!!!\n");
-+ msdc_reset();
-+ return;
-+ }
-+
-+ msdc_irq_save(flags);
-+
-+ if (ddr) {
-+ mode = 0x2;
-+ if (hz >= (hclk >> 2)) {
-+ div = 1;
-+ sclk = hclk >> 2;
-+ } else {
-+ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
-+ sclk = (hclk >> 2) / div;
-+ }
-+ } else if (hz >= hclk) {
-+ mode = 0x1;
-+ div = 0;
-+ sclk = hclk;
-+ } else {
-+ mode = 0x0;
-+ if (hz >= (hclk >> 1)) {
-+ div = 0;
-+ sclk = hclk >> 1;
-+ } else {
-+ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
-+ sclk = (hclk >> 2) / div;
-+ }
-+ }
-+
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
-+
-+ while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
-+
-+ host->sclk = sclk;
-+ host->mclk = hz;
-+ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
-+
-+/* printk("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>\n",
-+ hz / 1000, hclk / 1000, sclk / 1000);
-+*/
-+ msdc_irq_restore(flags);
-+}
-+
-+static void msdc_abort_data(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ struct mmc_command *stop = host->mrq->stop;
-+
-+// printk("Need to Abort. dma<%d>\n", host->dma_xfer);
-+
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+
-+ if (stop) {
-+// printk("stop when abort CMD<%d>\n", stop->opcode);
-+ msdc_do_command(host, stop, 0, CMD_TIMEOUT);
-+ }
-+}
-+
-+static unsigned int msdc_command_start(struct msdc_host *host,
-+ struct mmc_command *cmd, int tune, unsigned long timeout)
-+{
-+ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
-+ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
-+ MSDC_INT_ACMD19_DONE;
-+ u32 base = host->base;
-+ u32 opcode = cmd->opcode;
-+ u32 rawcmd;
-+ u32 resp;
-+ unsigned long tmo;
-+
-+ if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
-+ resp = RESP_R3;
-+ else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
-+ resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
-+ else if (opcode == MMC_FAST_IO)
-+ resp = RESP_R4;
-+ else if (opcode == MMC_GO_IRQ_STATE)
-+ resp = RESP_R5;
-+ else if (opcode == MMC_SELECT_CARD)
-+ resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
-+ else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
-+ resp = RESP_R1;
-+ else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
-+ resp = RESP_R1;
-+ else {
-+ switch (mmc_resp_type(cmd)) {
-+ case MMC_RSP_R1:
-+ resp = RESP_R1;
-+ break;
-+ case MMC_RSP_R1B:
-+ resp = RESP_R1B;
-+ break;
-+ case MMC_RSP_R2:
-+ resp = RESP_R2;
-+ break;
-+ case MMC_RSP_R3:
-+ resp = RESP_R3;
-+ break;
-+ case MMC_RSP_NONE:
-+ default:
-+ resp = RESP_NONE;
-+ break;
-+ }
-+ }
-+
-+ cmd->error = 0;
-+ rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
-+
-+ if (opcode == MMC_READ_MULTIPLE_BLOCK) {
-+ rawcmd |= (2 << 11);
-+ } else if (opcode == MMC_READ_SINGLE_BLOCK) {
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
-+ rawcmd |= ((2 << 11) | (1 << 13));
-+ } else if (opcode == MMC_WRITE_BLOCK) {
-+ rawcmd |= ((1 << 11) | (1 << 13));
-+ } else if (opcode == SD_IO_RW_EXTENDED) {
-+ if (cmd->data->flags & MMC_DATA_WRITE)
-+ rawcmd |= (1 << 13);
-+ if (cmd->data->blocks > 1)
-+ rawcmd |= (2 << 11);
-+ else
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
-+ rawcmd |= (1 << 14);
-+ } else if ((opcode == SD_APP_SEND_SCR) ||
-+ (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
-+ (opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
-+ (opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
-+ (opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == MMC_STOP_TRANSMISSION) {
-+ rawcmd |= (1 << 14);
-+ rawcmd &= ~(0x0FFF << 16);
-+ }
-+
-+// printk("CMD<%d><0x%.8x> Arg<0x%.8x>\n", opcode , rawcmd, cmd->arg);
-+
-+ tmo = jiffies + timeout;
-+
-+ if (opcode == MMC_SEND_STATUS) {
-+ for (;;) {
-+ if (!sdc_is_cmd_busy())
-+ break;
-+
-+ if (time_after(jiffies, tmo)) {
-+ //printk("XXX cmd_busy timeout: before CMD<%d>\n", opcode);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ goto end;
-+ }
-+ }
-+ } else {
-+ for (;;) {
-+ if (!sdc_is_busy())
-+ break;
-+ if (time_after(jiffies, tmo)) {
-+ //printk("XXX sdc_busy timeout: before CMD<%d>\n", opcode);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ goto end;
-+ }
-+ }
-+ }
-+
-+ //BUG_ON(in_interrupt());
-+ host->cmd = cmd;
-+ host->cmd_rsp = resp;
-+ init_completion(&host->cmd_done);
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ sdc_send_cmd(rawcmd, cmd->arg);
-+
-+end:
-+ return cmd->error;
-+}
-+
-+static unsigned int msdc_command_resp(struct msdc_host *host, struct mmc_command *cmd,
-+ int tune, unsigned long timeout)
-+{
-+ u32 base = host->base;
-+ //u32 opcode = cmd->opcode;
-+ u32 resp;
-+ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
-+ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
-+ MSDC_INT_ACMD19_DONE;
-+
-+ resp = host->cmd_rsp;
-+
-+ BUG_ON(in_interrupt());
-+ spin_unlock(&host->lock);
-+ if (!wait_for_completion_timeout(&host->cmd_done, 10*timeout)) {
-+ //printk("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n", opcode, cmd->arg);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ }
-+ spin_lock(&host->lock);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+ host->cmd = NULL;
-+
-+ if (!tune)
-+ return cmd->error;
-+
-+ /* memory card CRC */
-+ if (host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
-+ if (sdr_read32(SDC_CMD) & 0x1800) {
-+ msdc_abort_data(host);
-+ } else {
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ cmd->error = msdc_tune_cmdrsp(host,cmd);
-+ }
-+
-+ return cmd->error;
-+}
-+
-+static unsigned int msdc_do_command(struct msdc_host *host, struct mmc_command *cmd,
-+ int tune, unsigned long timeout)
-+{
-+ if (!msdc_command_start(host, cmd, tune, timeout))
-+ msdc_command_resp(host, cmd, tune, timeout);
-+
-+ //printk(" return<%d> resp<0x%.8x>\n", cmd->error, cmd->resp[0]);
-+ return cmd->error;
-+}
-+
-+static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
-+{
-+ u32 base = host->base;
-+ int ret = 0;
-+
-+ if (atomic_read(&host->abort))
-+ ret = 1;
-+
-+ if (time_after(jiffies, tmo)) {
-+ data->error = (unsigned int)-ETIMEDOUT;
-+ //printk("XXX PIO Data Timeout: CMD<%d>\n", host->mrq->cmd->opcode);
-+ ret = 1;
-+ }
-+
-+ if (ret) {
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ //printk("msdc pio find abort\n");
-+ }
-+
-+ return ret;
-+}
-+
-+static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
-+{
-+ struct scatterlist *sg = data->sg;
-+ u32 base = host->base;
-+ u32 num = data->sg_len;
-+ u32 *ptr;
-+ u8 *u8ptr;
-+ u32 left;
-+ u32 count, size = 0;
-+ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
-+ unsigned long tmo = jiffies + DAT_TIMEOUT;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ while (num) {
-+ left = sg_dma_len(sg);
-+ ptr = sg_virt(sg);
-+ while (left) {
-+ if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
-+ count = MSDC_FIFO_THD >> 2;
-+ do {
-+ *ptr++ = msdc_fifo_read32();
-+ } while (--count);
-+ left -= MSDC_FIFO_THD;
-+ } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
-+ while (left > 3) {
-+ *ptr++ = msdc_fifo_read32();
-+ left -= 4;
-+ }
-+
-+ u8ptr = (u8 *)ptr;
-+ while(left) {
-+ * u8ptr++ = msdc_fifo_read8();
-+ left--;
-+ }
-+ }
-+
-+ if (msdc_pio_abort(host, data, tmo))
-+ goto end;
-+ }
-+ size += sg_dma_len(sg);
-+ sg = sg_next(sg); num--;
-+ }
-+end:
-+ data->bytes_xfered += size;
-+ //printk(" PIO Read<%d>bytes\n", size);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+ if(data->error)
-+ printk("read pio data->error<%d> left<%d> size<%d>\n", data->error, left, size);
-+
-+ return data->error;
-+}
-+
-+static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
-+{
-+ u32 base = host->base;
-+ struct scatterlist *sg = data->sg;
-+ u32 num = data->sg_len;
-+ u32 *ptr;
-+ u8 *u8ptr;
-+ u32 left;
-+ u32 count, size = 0;
-+ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
-+ unsigned long tmo = jiffies + DAT_TIMEOUT;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ while (num) {
-+ left = sg_dma_len(sg);
-+ ptr = sg_virt(sg);
-+
-+ while (left) {
-+ if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
-+ count = MSDC_FIFO_SZ >> 2;
-+ do {
-+ msdc_fifo_write32(*ptr); ptr++;
-+ } while (--count);
-+ left -= MSDC_FIFO_SZ;
-+ } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
-+ while (left > 3) {
-+ msdc_fifo_write32(*ptr); ptr++;
-+ left -= 4;
-+ }
-+
-+ u8ptr = (u8*)ptr;
-+ while( left) {
-+ msdc_fifo_write8(*u8ptr);
-+ u8ptr++;
-+ left--;
-+ }
-+ }
-+
-+ if (msdc_pio_abort(host, data, tmo))
-+ goto end;
-+ }
-+ size += sg_dma_len(sg);
-+ sg = sg_next(sg); num--;
-+ }
-+end:
-+ data->bytes_xfered += size;
-+ //printk(" PIO Write<%d>bytes\n", size);
-+ if(data->error)
-+ printk("write pio data->error<%d>\n", data->error);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+
-+ return data->error;
-+}
-+
-+static void msdc_dma_start(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
-+
-+ //printk("DMA start\n");
-+}
-+
-+static void msdc_dma_stop(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
-+
-+ //printk("DMA status: 0x%.8x\n",sdr_read32(MSDC_DMA_CFG));
-+
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
-+ while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
-+ sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
-+
-+ //printk("DMA stop\n");
-+}
-+
-+static u8 msdc_dma_calcs(u8 *buf, u32 len)
-+{
-+ u32 i, sum = 0;
-+
-+ for (i = 0; i < len; i++)
-+ sum += buf[i];
-+
-+ return 0xFF - (u8)sum;
-+}
-+
-+static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
-+{
-+ u32 base = host->base;
-+ u32 sglen = dma->sglen;
-+ u32 j, num, bdlen;
-+ u8 blkpad, dwpad, chksum;
-+ struct scatterlist *sg = dma->sg;
-+ gpd_t *gpd;
-+ bd_t *bd;
-+
-+ switch (dma->mode) {
-+ case MSDC_MODE_DMA_BASIC:
-+ BUG_ON(dma->xfersz > 65535);
-+ BUG_ON(dma->sglen != 1);
-+ sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
-+ break;
-+
-+ case MSDC_MODE_DMA_DESC:
-+ blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
-+ dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
-+ chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
-+
-+ num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
-+ BUG_ON(num !=1 );
-+
-+ gpd = dma->gpd;
-+ bd = dma->bd;
-+ bdlen = sglen;
-+
-+ gpd->hwo = 1; /* hw will clear it */
-+ gpd->bdp = 1;
-+ gpd->chksum = 0; /* need to clear first. */
-+ gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
-+
-+ for (j = 0; j < bdlen; j++) {
-+ msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
-+ if( j == bdlen - 1)
-+ bd[j].eol = 1;
-+ else
-+ bd[j].eol = 0;
-+ bd[j].chksum = 0; /* checksume need to clear first */
-+ bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
-+ sg++;
-+ }
-+
-+ dma->used_gpd += 2;
-+ dma->used_bd += bdlen;
-+
-+ sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
-+ sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
-+ break;
-+ }
-+
-+// printk("DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
-+// printk("DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG));
-+// printk("DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA));
-+
-+ return 0;
-+}
-+
-+static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
-+ struct scatterlist *sg, unsigned int sglen)
-+{
-+ BUG_ON(sglen > MAX_BD_NUM);
-+
-+ dma->sg = sg;
-+ dma->flags = DMA_FLAG_EN_CHKSUM;
-+ dma->sglen = sglen;
-+ dma->xfersz = host->xfer_size;
-+ dma->burstsz = MSDC_BRUST_64B;
-+
-+ if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
-+ dma->mode = MSDC_MODE_DMA_BASIC;
-+ else
-+ dma->mode = MSDC_MODE_DMA_DESC;
-+
-+// printk("DMA mode<%d> sglen<%d> xfersz<%d>\n", dma->mode, dma->sglen, dma->xfersz);
-+
-+ msdc_dma_config(host, dma);
-+}
-+
-+static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
-+{
-+ u32 base = host->base;
-+
-+ sdr_write32(SDC_BLK_NUM, blknum);
-+}
-+
-+static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ u32 base = host->base;
-+ unsigned int left=0;
-+ int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
-+
-+#define SND_DAT 0
-+#define SND_CMD 1
-+
-+ BUG_ON(mmc == NULL);
-+ BUG_ON(mrq == NULL);
-+
-+ host->error = 0;
-+ atomic_set(&host->abort, 0);
-+
-+ cmd = mrq->cmd;
-+ data = mrq->cmd->data;
-+
-+ if (!data) {
-+ send_type = SND_CMD;
-+ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+ } else {
-+ BUG_ON(data->blksz > HOST_MAX_BLKSZ);
-+ send_type=SND_DAT;
-+
-+ data->error = 0;
-+ read = data->flags & MMC_DATA_READ ? 1 : 0;
-+ host->data = data;
-+ host->xfer_size = data->blocks * data->blksz;
-+ host->blksz = data->blksz;
-+
-+ host->dma_xfer = dma = ((host->xfer_size >= 512) ? 1 : 0);
-+
-+ if (read)
-+ if ((host->timeout_ns != data->timeout_ns) ||
-+ (host->timeout_clks != data->timeout_clks))
-+ msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
-+
-+ msdc_set_blknum(host, data->blocks);
-+
-+ if (dma) {
-+ msdc_dma_on();
-+ init_completion(&host->xfer_done);
-+
-+ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+
-+ dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-+ dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
-+ msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
-+
-+ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+
-+ msdc_dma_start(host);
-+
-+ spin_unlock(&host->lock);
-+ if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
-+ /*printk("XXX CMD<%d> wait xfer_done<%d> timeout!!\n", cmd->opcode, data->blocks * data->blksz);
-+ printk(" DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA));
-+ printk(" DMA_CA = 0x%x\n", sdr_read32(MSDC_DMA_CA));
-+ printk(" DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL));
-+ printk(" DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG));*/
-+ data->error = (unsigned int)-ETIMEDOUT;
-+
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ spin_lock(&host->lock);
-+ msdc_dma_stop(host);
-+ } else {
-+ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+
-+ if (read) {
-+ if (msdc_pio_read(host, data))
-+ goto done;
-+ } else {
-+ if (msdc_pio_write(host, data))
-+ goto done;
-+ }
-+
-+ if (!read) {
-+ while (1) {
-+ left = msdc_txfifocnt();
-+ if (left == 0) {
-+ break;
-+ }
-+ if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
-+ break;
-+ /* Fix me: what about if data error, when stop ? how to? */
-+ }
-+ }
-+ } else {
-+ /* Fix me: read case: need to check CRC error */
-+ }
-+
-+ /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy.
-+ For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
-+ */
-+
-+ /* try not to wait xfer_comp interrupt.
-+ the next command will check SDC_BUSY.
-+ SDC_BUSY means xfer_comp assert
-+ */
-+
-+ } // PIO mode
-+
-+ /* Last: stop transfer */
-+ if (data->stop){
-+ if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
-+ goto done;
-+ }
-+ }
-+ }
-+
-+done:
-+ if (data != NULL) {
-+ host->data = NULL;
-+ host->dma_xfer = 0;
-+ if (dma != 0) {
-+ msdc_dma_off();
-+ host->dma.used_bd = 0;
-+ host->dma.used_gpd = 0;
-+ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
-+ }
-+ host->blksz = 0;
-+
-+ // printk("CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio\n"),
-+ // (read ? "read ":"write") ,data->blksz, data->blocks, data->error);
-+ }
-+
-+ if (mrq->cmd->error) host->error = 0x001;
-+ if (mrq->data && mrq->data->error) host->error |= 0x010;
-+ if (mrq->stop && mrq->stop->error) host->error |= 0x100;
-+
-+ //if (host->error) printk("host->error<%d>\n", host->error);
-+
-+ return host->error;
-+}
-+
-+static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
-+{
-+ struct mmc_command cmd;
-+ struct mmc_request mrq;
-+ u32 err;
-+
-+ memset(&cmd, 0, sizeof(struct mmc_command));
-+ cmd.opcode = MMC_APP_CMD;
-+#if 0 /* bug: we meet mmc->card is null when ACMD6 */
-+ cmd.arg = mmc->card->rca << 16;
-+#else
-+ cmd.arg = host->app_cmd_arg;
-+#endif
-+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-+
-+ memset(&mrq, 0, sizeof(struct mmc_request));
-+ mrq.cmd = &cmd; cmd.mrq = &mrq;
-+ cmd.data = NULL;
-+
-+ err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);
-+ return err;
-+}
-+
-+static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
-+{
-+ int result = -1;
-+ u32 base = host->base;
-+ u32 rsmpl, cur_rsmpl, orig_rsmpl;
-+ u32 rrdly, cur_rrdly = 0, orig_rrdly;
-+ u32 skip = 1;
-+
-+ /* ==== don't support 3.0 now ====
-+ 1: R_SMPL[1]
-+ 2: PAD_CMD_RESP_RXDLY[26:22]
-+ ==========================*/
-+
-+ // save the previous tune result
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, orig_rsmpl);
-+ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
-+
-+ rrdly = 0;
-+ do {
-+ for (rsmpl = 0; rsmpl < 2; rsmpl++) {
-+ /* Lv1: R_SMPL[1] */
-+ cur_rsmpl = (orig_rsmpl + rsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ //printk("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n",
-+ // host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
-+ //printk("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n", cmd->opcode,
-+// (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
-+
-+ if (result == 0) {
-+ return 0;
-+ }
-+ if (result != (unsigned int)(-EIO)) {
-+ // printk("TUNE_CMD<%d> Error<%d> not -EIO\n", cmd->opcode, result);
-+ return result;
-+ }
-+
-+ /* should be EIO */
-+ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
-+ msdc_abort_data(host);
-+ }
-+ }
-+
-+ /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */
-+ cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
-+ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);
-+ }while (++rrdly < 32);
-+
-+ return result;
-+}
-+
-+/* Support SD2.0 Only */
-+static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ u32 ddr=0;
-+ u32 dcrc = 0;
-+ u32 rxdly, cur_rxdly0, cur_rxdly1;
-+ u32 dsmpl, cur_dsmpl, orig_dsmpl;
-+ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
-+ u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7;
-+ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
-+ u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
-+ int result = -1;
-+ u32 skip = 1;
-+
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
-+
-+ /* Tune Method 2. */
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
-+
-+ rxdly = 0;
-+ do {
-+ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
-+ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ //printk("TUNE_BREAD app_cmd<%d> failed\n", host->mrq->cmd->opcode);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_request(mmc,mrq);
-+
-+ sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
-+ if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
-+ //printk("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n",
-+ // (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
-+ // sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
-+
-+ /* Fix me: result is 0, but dcrc is still exist */
-+ if (result == 0 && dcrc == 0) {
-+ goto done;
-+ } else {
-+ /* there is a case: command timeout, and data phase not processed */
-+ if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
-+ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
-+ // result, mrq->cmd->error, mrq->data->error);
-+ goto done;
-+ }
-+ }
-+ }
-+
-+ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
-+ cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
-+
-+ /* E1 ECO. YD: Reverse */
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
-+ orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
-+ orig_dat6 = (cur_rxdly1 >> 8) & 0x1F;
-+ orig_dat7 = (cur_rxdly1 >> 0) & 0x1F;
-+ } else {
-+ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat4 = (cur_rxdly1 >> 0) & 0x1F;
-+ orig_dat5 = (cur_rxdly1 >> 8) & 0x1F;
-+ orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
-+ orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
-+ }
-+
-+ if (ddr) {
-+ cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
-+ cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
-+ cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
-+ cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
-+ } else {
-+ cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
-+ cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
-+ cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
-+ cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
-+ }
-+ cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
-+ cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
-+ cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
-+ cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
-+
-+ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
-+ cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
-+
-+ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
-+ sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
-+
-+ } while (++rxdly < 32);
-+
-+done:
-+ return result;
-+}
-+
-+static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+
-+ u32 wrrdly, cur_wrrdly = 0, orig_wrrdly;
-+ u32 dsmpl, cur_dsmpl, orig_dsmpl;
-+ u32 rxdly, cur_rxdly0;
-+ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
-+ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
-+ int result = -1;
-+ u32 skip = 1;
-+
-+ // MSDC_IOCON_DDR50CKD need to check. [Fix me]
-+
-+ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl );
-+
-+ /* Tune Method 2. just DAT0 */
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
-+ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
-+
-+ /* E1 ECO. YD: Reverse */
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
-+ } else {
-+ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
-+ }
-+
-+ rxdly = 0;
-+ do {
-+ wrrdly = 0;
-+ do {
-+ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
-+ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ //printk("TUNE_BWRITE app_cmd<%d> failed\n", host->mrq->cmd->opcode);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_request(mmc,mrq);
-+
-+ //printk("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n",
-+ // result == 0 ? "PASS" : "FAIL",
-+ // cur_dsmpl, cur_wrrdly, cur_rxdly0);
-+
-+ if (result == 0) {
-+ goto done;
-+ }
-+ else {
-+ /* there is a case: command timeout, and data phase not processed */
-+ if (mrq->data->error != (unsigned int)(-EIO)) {
-+ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n",
-+ // && result, mrq->cmd->error, mrq->data->error);
-+ goto done;
-+ }
-+ }
-+ }
-+ cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
-+ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);
-+ } while (++wrrdly < 32);
-+
-+ cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
-+ cur_dat1 = orig_dat1;
-+ cur_dat2 = orig_dat2;
-+ cur_dat3 = orig_dat3;
-+
-+ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
-+ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
-+ } while (++rxdly < 32);
-+
-+done:
-+ return result;
-+}
-+
-+static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
-+{
-+ struct mmc_command cmd;
-+ struct mmc_request mrq;
-+ u32 err;
-+
-+ memset(&cmd, 0, sizeof(struct mmc_command));
-+ cmd.opcode = MMC_SEND_STATUS;
-+ if (mmc->card) {
-+ cmd.arg = mmc->card->rca << 16;
-+ } else {
-+ //printk("cmd13 mmc card is null\n");
-+ cmd.arg = host->app_cmd_arg;
-+ }
-+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
-+
-+ memset(&mrq, 0, sizeof(struct mmc_request));
-+ mrq.cmd = &cmd; cmd.mrq = &mrq;
-+ cmd.data = NULL;
-+
-+ err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
-+
-+ if (status)
-+ *status = cmd.resp[0];
-+
-+ return err;
-+}
-+
-+static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
-+{
-+ u32 err = 0;
-+ u32 status = 0;
-+
-+ do {
-+ err = msdc_get_card_status(mmc, host, &status);
-+ if (err)
-+ return err;
-+ /* need cmd12? */
-+ //printk("cmd<13> resp<0x%x>\n", status);
-+ } while (R1_CURRENT_STATE(status) == 7);
-+
-+ return err;
-+}
-+
-+static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ int ret=0, read;
-+
-+ cmd = mrq->cmd;
-+ data = mrq->cmd->data;
-+
-+ read = data->flags & MMC_DATA_READ ? 1 : 0;
-+
-+ if (read) {
-+ if (data->error == (unsigned int)(-EIO))
-+ ret = msdc_tune_bread(mmc,mrq);
-+ } else {
-+ ret = msdc_check_busy(mmc, host);
-+ if (ret){
-+ //printk("XXX cmd13 wait program done failed\n");
-+ return ret;
-+ }
-+ /* CRC and TO */
-+ /* Fix me: don't care card status? */
-+ ret = msdc_tune_bwrite(mmc,mrq);
-+ }
-+
-+ return ret;
-+}
-+
-+static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+
-+ if (host->mrq) {
-+ //printk("XXX host->mrq<0x%.8x>\n", (int)host->mrq);
-+ BUG();
-+ }
-+ if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
-+ //printk("cmd<%d> card<%d> power<%d>\n", mrq->cmd->opcode, is_card_present(host), host->power_mode);
-+ mrq->cmd->error = (unsigned int)-ENOMEDIUM;
-+ mrq->done(mrq);
-+ return;
-+ }
-+ spin_lock(&host->lock);
-+
-+ host->mrq = mrq;
-+
-+ if (msdc_do_request(mmc,mrq))
-+ if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error)
-+ msdc_tune_request(mmc,mrq);
-+
-+ if (mrq->cmd->opcode == MMC_APP_CMD) {
-+ host->app_cmd = 1;
-+ host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */
-+ } else {
-+ host->app_cmd = 0;
-+ }
-+
-+ host->mrq = NULL;
-+
-+ spin_unlock(&host->lock);
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+/* called by ops.set_ios */
-+static void msdc_set_buswidth(struct msdc_host *host, u32 width)
-+{
-+ u32 base = host->base;
-+ u32 val = sdr_read32(SDC_CFG);
-+
-+ val &= ~SDC_CFG_BUSWIDTH;
-+
-+ switch (width) {
-+ default:
-+ case MMC_BUS_WIDTH_1:
-+ width = 1;
-+ val |= (MSDC_BUS_1BITS << 16);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ val |= (MSDC_BUS_4BITS << 16);
-+ break;
-+ case MMC_BUS_WIDTH_8:
-+ val |= (MSDC_BUS_8BITS << 16);
-+ break;
-+ }
-+
-+ sdr_write32(SDC_CFG, val);
-+
-+ //printk("Bus Width = %d\n", width);
-+}
-+
-+/* ops.set_ios */
-+static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct msdc_hw *hw=host->hw;
-+ u32 base = host->base;
-+ u32 ddr = 0;
-+
-+#ifdef MT6575_SD_DEBUG
-+ static char *vdd[] = {
-+ "1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
-+ "2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
-+ "2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
-+ "3.40v", "3.50v", "3.60v"
-+ };
-+ static char *power_mode[] = {
-+ "OFF", "UP", "ON"
-+ };
-+ static char *bus_mode[] = {
-+ "UNKNOWN", "OPENDRAIN", "PUSHPULL"
-+ };
-+ static char *timing[] = {
-+ "LEGACY", "MMC_HS", "SD_HS"
-+ };
-+
-+ /*printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)\n",
-+ ios->clock / 1000, bus_mode[ios->bus_mode],
-+ (ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
-+ power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);*/
-+#endif
-+
-+ msdc_set_buswidth(host, ios->bus_width);
-+
-+ /* Power control ??? */
-+ switch (ios->power_mode) {
-+ case MMC_POWER_OFF:
-+ case MMC_POWER_UP:
-+ // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
-+ break;
-+ case MMC_POWER_ON:
-+ host->power_mode = MMC_POWER_ON;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* Clock control */
-+ if (host->mclk != ios->clock) {
-+ if(ios->clock > 25000000) {
-+ //printk("SD data latch edge<%d>\n", hw->data_edge);
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
-+ } else {
-+ sdr_write32(MSDC_IOCON, 0x00000000);
-+ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
-+ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
-+ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
-+ }
-+ msdc_set_mclk(host, ddr, ios->clock);
-+ }
-+}
-+
-+/* ops.get_ro */
-+static int msdc_ops_get_ro(struct mmc_host *mmc)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ unsigned long flags;
-+ int ro = 0;
-+
-+ if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
-+ spin_lock_irqsave(&host->lock, flags);
-+ ro = (sdr_read32(MSDC_PS) >> 31);
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ }
-+ return ro;
-+}
-+
-+/* ops.get_cd */
-+static int msdc_ops_get_cd(struct mmc_host *mmc)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ unsigned long flags;
-+ int present = 1;
-+
-+ /* for sdio, MSDC_REMOVABLE not set, always return 1 */
-+ if (!(host->hw->flags & MSDC_REMOVABLE)) {
-+ /* For sdio, read H/W always get<1>, but may timeout some times */
-+#if 1
-+ host->card_inserted = 1;
-+ return 1;
-+#else
-+ host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
-+ printk("sdio ops_get_cd<%d>\n", host->card_inserted);
-+ return host->card_inserted;
-+#endif
-+ }
-+
-+ /* MSDC_CD_PIN_EN set for card */
-+ if (host->hw->flags & MSDC_CD_PIN_EN) {
-+ spin_lock_irqsave(&host->lock, flags);
-+#if 0
-+ present = host->card_inserted; /* why not read from H/W: Fix me*/
-+#else
-+ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
-+ host->card_inserted = present;
-+#endif
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ } else {
-+ present = 0; /* TODO? Check DAT3 pins for card detection */
-+ }
-+
-+ //printk("ops_get_cd return<%d>\n", present);
-+ return present;
-+}
-+
-+/* ops.enable_sdio_irq */
-+static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ u32 tmp;
-+
-+ if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
-+ if (enable) {
-+ hw->enable_sdio_eirq(); /* combo_sdio_enable_eirq */
-+ } else {
-+ hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
-+ }
-+ } else {
-+ //printk("XXX \n"); /* so never enter here */
-+ tmp = sdr_read32(SDC_CFG);
-+ /* FIXME. Need to interrupt gap detection */
-+ if (enable) {
-+ tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-+ } else {
-+ tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-+ }
-+ sdr_write32(SDC_CFG, tmp);
-+ }
-+}
-+
-+static struct mmc_host_ops mt_msdc_ops = {
-+ .request = msdc_ops_request,
-+ .set_ios = msdc_ops_set_ios,
-+ .get_ro = msdc_ops_get_ro,
-+ .get_cd = msdc_ops_get_cd,
-+ .enable_sdio_irq = msdc_ops_enable_sdio_irq,
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+/* interrupt handler */
-+/*--------------------------------------------------------------------------*/
-+static irqreturn_t msdc_irq(int irq, void *dev_id)
-+{
-+ struct msdc_host *host = (struct msdc_host *)dev_id;
-+ struct mmc_data *data = host->data;
-+ struct mmc_command *cmd = host->cmd;
-+ u32 base = host->base;
-+
-+ u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY |
-+ MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
-+ MSDC_INT_ACMD19_DONE;
-+ u32 datsts = MSDC_INT_DATCRCERR |MSDC_INT_DATTMO;
-+
-+ u32 intsts = sdr_read32(MSDC_INT);
-+ u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
-+
-+ sdr_write32(MSDC_INT, intsts); /* clear interrupts */
-+ /* MSG will cause fatal error */
-+
-+ /* card change interrupt */
-+ if (intsts & MSDC_INT_CDSC){
-+ //printk("MSDC_INT_CDSC irq<0x%.8x>\n", intsts);
-+ tasklet_hi_schedule(&host->card_tasklet);
-+ /* tuning when plug card ? */
-+ }
-+
-+ /* sdio interrupt */
-+ if (intsts & MSDC_INT_SDIOIRQ){
-+ //printk("XXX MSDC_INT_SDIOIRQ\n"); /* seems not sdio irq */
-+ //mmc_signal_sdio_irq(host->mmc);
-+ }
-+
-+ /* transfer complete interrupt */
-+ if (data != NULL) {
-+ if (inten & MSDC_INT_XFER_COMPL) {
-+ data->bytes_xfered = host->dma.xfersz;
-+ complete(&host->xfer_done);
-+ }
-+
-+ if (intsts & datsts) {
-+ /* do basic reset, or stop command will sdc_busy */
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ atomic_set(&host->abort, 1); /* For PIO mode exit */
-+
-+ if (intsts & MSDC_INT_DATTMO){
-+ //printk("XXX CMD<%d> MSDC_INT_DATTMO\n", host->mrq->cmd->opcode);
-+ data->error = (unsigned int)-ETIMEDOUT;
-+ }
-+ else if (intsts & MSDC_INT_DATCRCERR){
-+ //printk("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
-+ data->error = (unsigned int)-EIO;
-+ }
-+
-+ //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
-+ if (host->dma_xfer) {
-+ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
-+ } /* PIO mode can't do complete, because not init */
-+ }
-+ }
-+
-+ /* command interrupts */
-+ if ((cmd != NULL) && (intsts & cmdsts)) {
-+ if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) ||
-+ (intsts & MSDC_INT_ACMD19_DONE)) {
-+ u32 *rsp = &cmd->resp[0];
-+
-+ switch (host->cmd_rsp) {
-+ case RESP_NONE:
-+ break;
-+ case RESP_R2:
-+ *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
-+ *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
-+ break;
-+ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
-+ if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
-+ *rsp = sdr_read32(SDC_ACMD_RESP);
-+ } else {
-+ *rsp = sdr_read32(SDC_RESP0);
-+ }
-+ break;
-+ }
-+ } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
-+ if(intsts & MSDC_INT_ACMDCRCERR){
-+ //printk("XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",cmd->opcode);
-+ }
-+ else {
-+ //printk("XXX CMD<%d> MSDC_INT_RSPCRCERR\n",cmd->opcode);
-+ }
-+ cmd->error = (unsigned int)-EIO;
-+ } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
-+ if(intsts & MSDC_INT_ACMDTMO){
-+ //printk("XXX CMD<%d> MSDC_INT_ACMDTMO\n",cmd->opcode);
-+ }
-+ else {
-+ //printk("XXX CMD<%d> MSDC_INT_CMDTMO\n",cmd->opcode);
-+ }
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ complete(&host->cmd_done);
-+ }
-+
-+ /* mmc irq interrupts */
-+ if (intsts & MSDC_INT_MMCIRQ) {
-+ //printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
-+ }
-+
-+#ifdef MT6575_SD_DEBUG
-+ {
-+ msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
-+ /*printk("IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)\n",
-+ intsts,
-+ int_reg->mmcirq,
-+ int_reg->cdsc,
-+ int_reg->atocmdrdy,
-+ int_reg->atocmdtmo,
-+ int_reg->atocmdcrc,
-+ int_reg->atocmd19done);
-+ printk("IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)\n",
-+ intsts,
-+ int_reg->sdioirq,
-+ int_reg->cmdrdy,
-+ int_reg->cmdtmo,
-+ int_reg->rspcrc,
-+ int_reg->csta);
-+ printk("IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)\n",
-+ intsts,
-+ int_reg->xfercomp,
-+ int_reg->dxferdone,
-+ int_reg->dattmo,
-+ int_reg->datcrc,
-+ int_reg->dmaqempty);*/
-+
-+ }
-+#endif
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+/* platform_driver members */
-+/*--------------------------------------------------------------------------*/
-+/* called by msdc_drv_probe/remove */
-+static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
-+{
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+
-+ /* for sdio, not set */
-+ if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
-+ /* Pull down card detection pin since it is not avaiable */
-+ /*
-+ if (hw->config_gpio_pin)
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
-+ */
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
-+ return;
-+ }
-+
-+ //printk("CD IRQ Eanable(%d)\n", enable);
-+
-+ if (enable) {
-+ if (hw->enable_cd_eirq) { /* not set, never enter */
-+ hw->enable_cd_eirq();
-+ } else {
-+ /* card detection circuit relies on the core power so that the core power
-+ * shouldn't be turned off. Here adds a reference count to keep
-+ * the core power alive.
-+ */
-+ //msdc_vcore_on(host); //did in msdc_init_hw()
-+
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
-+
-+ sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
-+ sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+ sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */
-+ }
-+ } else {
-+ if (hw->disable_cd_eirq) {
-+ hw->disable_cd_eirq();
-+ } else {
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
-+
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+
-+ /* Here decreases a reference count to core power since card
-+ * detection circuit is shutdown.
-+ */
-+ //msdc_vcore_off(host);
-+ }
-+ }
-+}
-+
-+/* called by msdc_drv_probe */
-+static void msdc_init_hw(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ struct msdc_hw *hw = host->hw;
-+
-+#ifdef MT6575_SD_DEBUG
-+ msdc_reg[host->id] = (struct msdc_regs *)host->base;
-+#endif
-+
-+ /* Power on */
-+#if 0 /* --- chhung */
-+ msdc_vcore_on(host);
-+ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
-+ msdc_select_clksrc(host, hw->clk_src);
-+ enable_clock(PERI_MSDC0_PDN + host->id, "SD");
-+ msdc_vdd_on(host);
-+#endif /* end of --- */
-+ /* Configure to MMC/SD mode */
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
-+
-+ /* Reset */
-+ msdc_reset();
-+ msdc_clr_fifo();
-+
-+ /* Disable card detection */
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+
-+ /* Disable and clear all interrupts */
-+ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
-+ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
-+
-+#if 1
-+ /* reset tuning parameter */
-+ sdr_write32(MSDC_PAD_CTL0, 0x00090000);
-+ sdr_write32(MSDC_PAD_CTL1, 0x000A0000);
-+ sdr_write32(MSDC_PAD_CTL2, 0x000A0000);
-+ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
-+ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
-+ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
-+ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
-+ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
-+ sdr_write32(MSDC_IOCON, 0x00000000);
-+#if 0 // use MT7620 default value: 0x403c004f
-+ sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
-+#endif
-+
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ if (host->id == 1) {
-+ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
-+ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
-+
-+ /* internal clock: latch read data */
-+ sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);
-+ }
-+ }
-+#endif
-+
-+ /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in
-+ pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
-+ set when kernel driver wants to use SDIO bus interrupt */
-+ /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
-+ sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
-+
-+ /* disable detect SDIO device interupt function */
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
-+
-+ /* eneable SMT for glitch filter */
-+ sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
-+ sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
-+ sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
-+
-+#if 1
-+ /* set clk, cmd, dat pad driving */
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
-+#else
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
-+#endif
-+
-+ /* set sampling edge */
-+
-+ /* write crc timeout detection */
-+ sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
-+
-+ /* Configure to default data timeout */
-+ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
-+
-+ msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
-+
-+ //printk("init hardware done!\n");
-+}
-+
-+/* called by msdc_drv_remove */
-+static void msdc_deinit_hw(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+
-+ /* Disable and clear all interrupts */
-+ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
-+ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
-+
-+ /* Disable card detection */
-+ msdc_enable_cd_irq(host, 0);
-+ // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
-+}
-+
-+/* init gpd and bd list in msdc_drv_probe */
-+static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
-+{
-+ gpd_t *gpd = dma->gpd;
-+ bd_t *bd = dma->bd;
-+ bd_t *ptr, *prev;
-+
-+ /* we just support one gpd */
-+ int bdlen = MAX_BD_PER_GPD;
-+
-+ /* init the 2 gpd */
-+ memset(gpd, 0, sizeof(gpd_t) * 2);
-+ //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */
-+ //gpd->next = (dma->gpd_addr + 1); /* bug */
-+ gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));
-+
-+ //gpd->intr = 0;
-+ gpd->bdp = 1; /* hwo, cs, bd pointer */
-+ //gpd->ptr = (void*)virt_to_phys(bd);
-+ gpd->ptr = (void *)dma->bd_addr; /* physical address */
-+
-+ memset(bd, 0, sizeof(bd_t) * bdlen);
-+ ptr = bd + bdlen - 1;
-+ //ptr->eol = 1; /* 0 or 1 [Fix me]*/
-+ //ptr->next = 0;
-+
-+ while (ptr != bd) {
-+ prev = ptr - 1;
-+ prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
-+ ptr = prev;
-+ }
-+}
-+
-+static int msdc_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ __iomem void *base;
-+ struct mmc_host *mmc;
-+ struct resource *mem;
-+ struct msdc_host *host;
-+ struct msdc_hw *hw;
-+ int ret, irq;
-+ pdev->dev.platform_data = &msdc0_hw;
-+
-+ /* Allocate MMC host for this device */
-+ mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
-+ if (!mmc) return -ENOMEM;
-+
-+ hw = (struct msdc_hw*)pdev->dev.platform_data;
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+
-+ //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
-+
-+ base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+/* mem = request_mem_region(mem->start - 0xa0000000, (mem->end - mem->start + 1) - 0xa0000000, dev_name(&pdev->dev));
-+ if (mem == NULL) {
-+ mmc_free_host(mmc);
-+ return -EBUSY;
-+ }
-+*/
-+ /* Set host parameters to mmc */
-+ mmc->ops = &mt_msdc_ops;
-+ mmc->f_min = HOST_MIN_MCLK;
-+ mmc->f_max = HOST_MAX_MCLK;
-+ mmc->ocr_avail = MSDC_OCR_AVAIL;
-+
-+ /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
-+ For sdio : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
-+ if (hw->flags & MSDC_HIGHSPEED) {
-+ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
-+ }
-+ if (hw->data_pins == 4) { /* current data_pins are all 4*/
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+ } else if (hw->data_pins == 8) {
-+ mmc->caps |= MMC_CAP_8_BIT_DATA;
-+ }
-+ if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
-+ mmc->caps |= MMC_CAP_SDIO_IRQ; /* yes for sdio */
-+
-+ /* MMC core transfer sizes tunable parameters */
-+ // mmc->max_hw_segs = MAX_HW_SGMTS;
-+// mmc->max_phys_segs = MAX_PHY_SGMTS;
-+ mmc->max_seg_size = MAX_SGMT_SZ;
-+ mmc->max_blk_size = HOST_MAX_BLKSZ;
-+ mmc->max_req_size = MAX_REQ_SZ;
-+ mmc->max_blk_count = mmc->max_req_size;
-+
-+ host = mmc_priv(mmc);
-+ host->hw = hw;
-+ host->mmc = mmc;
-+ host->id = pdev->id;
-+ host->error = 0;
-+ host->irq = irq;
-+ host->base = (unsigned long) base;
-+ host->mclk = 0; /* mclk: the request clock of mmc sub-system */
-+ host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */
-+ host->sclk = 0; /* sclk: the really clock after divition */
-+ host->pm_state = PMSG_RESUME;
-+ host->suspend = 0;
-+ host->core_clkon = 0;
-+ host->card_clkon = 0;
-+ host->core_power = 0;
-+ host->power_mode = MMC_POWER_OFF;
-+// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
-+ host->timeout_ns = 0;
-+ host->timeout_clks = DEFAULT_DTOC * 65536;
-+
-+ host->mrq = NULL;
-+ //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
-+
-+ host->dma.used_gpd = 0;
-+ host->dma.used_bd = 0;
-+
-+ /* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */
-+ host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL);
-+ host->dma.bd = dma_alloc_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), &host->dma.bd_addr, GFP_KERNEL);
-+ BUG_ON((!host->dma.gpd) || (!host->dma.bd));
-+ msdc_init_gpd_bd(host, &host->dma);
-+ /*for emmc*/
-+ msdc_6575_host[pdev->id] = host;
-+
-+ tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
-+ spin_lock_init(&host->lock);
-+ msdc_init_hw(host);
-+
-+ ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
-+ if (ret) goto release;
-+ // mt65xx_irq_unmask(irq); /* --- by chhung */
-+
-+ if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
-+ if (hw->request_cd_eirq) { /* not set for MT6575 */
-+ hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
-+ }
-+ }
-+
-+ if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
-+ hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
-+
-+ if (hw->register_pm) {/* yes for sdio */
-+ if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
-+ //printk("MSDC_SYS_SUSPEND and register_pm both set\n");
-+ }
-+ //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
-+ }
-+
-+ platform_set_drvdata(pdev, mmc);
-+
-+ ret = mmc_add_host(mmc);
-+ if (ret) goto free_irq;
-+
-+ /* Config card detection pin and enable interrupts */
-+ if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */
-+ msdc_enable_cd_irq(host, 1);
-+ } else {
-+ msdc_enable_cd_irq(host, 0);
-+ }
-+
-+ return 0;
-+
-+free_irq:
-+ free_irq(irq, host);
-+release:
-+ platform_set_drvdata(pdev, NULL);
-+ msdc_deinit_hw(host);
-+
-+ tasklet_kill(&host->card_tasklet);
-+
-+/* if (mem)
-+ release_mem_region(mem->start, mem->end - mem->start + 1);
-+*/
-+ mmc_free_host(mmc);
-+
-+ return ret;
-+}
-+
-+/* 4 device share one driver, using "drvdata" to show difference */
-+static int msdc_drv_remove(struct platform_device *pdev)
-+{
-+ struct mmc_host *mmc;
-+ struct msdc_host *host;
-+ struct resource *mem;
-+
-+
-+ mmc = platform_get_drvdata(pdev);
-+ BUG_ON(!mmc);
-+
-+ host = mmc_priv(mmc);
-+ BUG_ON(!host);
-+
-+ //printk("removed !!!\n");
-+
-+ platform_set_drvdata(pdev, NULL);
-+ mmc_remove_host(host->mmc);
-+ msdc_deinit_hw(host);
-+
-+ tasklet_kill(&host->card_tasklet);
-+ free_irq(host->irq, host);
-+
-+ dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
-+ dma_free_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), host->dma.bd, host->dma.bd_addr);
-+
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (mem)
-+ release_mem_region(mem->start, mem->end - mem->start + 1);
-+
-+ mmc_free_host(host->mmc);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620a_sdhci_match[] = {
-+ { .compatible = "ralink,mt7620a-sdhci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
-+
-+/* Fix me: Power Flow */
-+static struct platform_driver mt_msdc_driver = {
-+ .probe = msdc_drv_probe,
-+ .remove = msdc_drv_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7620a_sdhci_match,
-+
-+ },
-+};
-+
-+static int __init mt_msdc_init(void)
-+{
-+ int ret;
-+/* +++ chhung */
-+ unsigned int reg;
-+
-+ mtk_sd_device.dev.platform_data = &msdc0_hw;
-+ printk("MTK MSDC device init.\n");
-+ reg = sdr_read32((__iomem void *) 0xb0000060) & ~(0x3<<18);
-+ reg |= 0x1 << 18;
-+ sdr_write32((__iomem void *) 0xb0000060, reg);
-+/* end of +++ */
-+ ret = platform_driver_register(&mt_msdc_driver);
-+ if (ret) {
-+ printk(KERN_ERR DRV_NAME ": Can't register driver");
-+ return ret;
-+ }
-+ printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
-+
-+ //msdc_debug_proc_init();
-+ return 0;
-+}
-+
-+static void __exit mt_msdc_exit(void)
-+{
-+ platform_driver_unregister(&mt_msdc_driver);
-+}
-+
-+module_init(mt_msdc_init);
-+module_exit(mt_msdc_exit);
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
-+MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
-+
-+EXPORT_SYMBOL(msdc_6575_host);
diff --git a/target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
deleted file mode 100644
index 18ba4cc..0000000
--- a/target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 543f839e6fbeb325e6fa201e205ab18a46e37424 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:38:51 +0200
-Subject: [PATCH 128/133] mtd: fix cfi cmdset 0002 erase status check
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1957,7 +1957,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -2046,7 +2046,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
diff --git a/target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch
deleted file mode 100644
index 28274ee..0000000
--- a/target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 0ffe6cdf77793536a77b5c85cf41deb27cfc7632 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 129/133] mtd: cfi cmdset 0002 force word write
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -41,7 +41,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -52,7 +52,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1585,7 +1590,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1660,6 +1664,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch
deleted file mode 100644
index 45e4632..0000000
--- a/target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch
+++ /dev/null
@@ -1,2408 +0,0 @@
-From bea6f4b28443b7603e25b2404ad787a97f80fc59 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 17 Nov 2013 17:41:46 +0100
-Subject: [PATCH 130/133] mtd: ralink: add mt7620 nand driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/Kconfig | 4 +
- drivers/mtd/maps/Makefile | 2 +
- drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++
- drivers/mtd/maps/ralink_nand.h | 232 +++++
- 4 files changed, 2374 insertions(+)
- create mode 100644 drivers/mtd/maps/ralink_nand.c
- create mode 100644 drivers/mtd/maps/ralink_nand.h
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -424,4 +424,8 @@ config MTD_LATCH_ADDR
-
- If compiled as a module, it will be called latch-addr-flash.
-
-+config MTD_NAND_MT7620
-+ tristate "Support for NAND on Mediatek MT7620"
-+ depends on RALINK && SOC_MT7620
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -46,3 +46,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
-+obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o
-+
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.c
-@@ -0,0 +1,2136 @@
-+#define DEBUG
-+#include <linux/device.h>
-+#undef DEBUG
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/io.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#include "ralink_nand.h"
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+#include <linux/random.h>
-+#endif
-+
-+#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
-+
-+
-+#define BLOCK_ALIGNED(a) ((a) & (CFG_BLOCKSIZE - 1))
-+
-+#define READ_STATUS_RETRY 1000
-+
-+struct mtd_info *ranfc_mtd = NULL;
-+
-+int skipbbt = 0;
-+int ranfc_debug = 1;
-+static int ranfc_bbt = 1;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+static int ranfc_verify = 1;
-+#endif
-+static u32 nand_addrlen;
-+
-+#if 0
-+module_param(ranfc_debug, int, 0644);
-+module_param(ranfc_bbt, int, 0644);
-+module_param(ranfc_verify, int, 0644);
-+#endif
-+
-+#if 0
-+#define ra_dbg(args...) do { if (ranfc_debug) printk(args); } while(0)
-+#else
-+#define ra_dbg(args...)
-+#endif
-+
-+#define CLEAR_INT_STATUS() ra_outl(NFC_INT_ST, ra_inl(NFC_INT_ST))
-+#define NFC_TRANS_DONE() (ra_inl(NFC_INT_ST) & INT_ST_ND_DONE)
-+
-+int is_nand_page_2048 = 0;
-+const unsigned int nand_size_map[2][3] = {{25, 30, 30}, {20, 27, 30}};
-+
-+static int nfc_wait_ready(int snooze_ms);
-+
-+static const char * const mtk_probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+/**
-+ * reset nand chip
-+ */
-+static int nfc_chip_reset(void)
-+{
-+ int status;
-+
-+ //ra_dbg("%s:\n", __func__);
-+
-+ // reset nand flash
-+ ra_outl(NFC_CMD1, 0x0);
-+ ra_outl(NFC_CMD2, 0xff);
-+ ra_outl(NFC_ADDR, 0x0);
-+ ra_outl(NFC_CONF, 0x0411);
-+
-+ status = nfc_wait_ready(5); //erase wait 5us
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ }
-+
-+ return (int)(status & NAND_STATUS_FAIL);
-+
-+}
-+
-+
-+
-+/**
-+ * clear NFC and flash chip.
-+ */
-+static int nfc_all_reset(void)
-+{
-+ int retry;
-+
-+ ra_dbg("%s: \n", __func__);
-+
-+ // reset controller
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ CLEAR_INT_STATUS();
-+
-+ retry = READ_STATUS_RETRY;
-+ while ((ra_inl(NFC_INT_ST) & 0x02) != 0x02 && retry--);
-+ if (retry <= 0) {
-+ printk("nfc_all_reset: clean buffer fail \n");
-+ return -1;
-+ }
-+
-+ retry = READ_STATUS_RETRY;
-+ while ((ra_inl(NFC_STATUS) & 0x1) != 0x0 && retry--) { //fixme, controller is busy ?
-+ udelay(1);
-+ }
-+
-+ nfc_chip_reset();
-+
-+ return 0;
-+}
-+
-+/** NOTICE: only called by nfc_wait_ready().
-+ * @return -1, nfc can not get transction done
-+ * @return 0, ok.
-+ */
-+static int _nfc_read_status(char *status)
-+{
-+ unsigned long cmd1, conf;
-+ int int_st, nfc_st;
-+ int retry;
-+
-+ cmd1 = 0x70;
-+ conf = 0x000101 | (1 << 20);
-+
-+ //fixme, should we check nfc status?
-+ CLEAR_INT_STATUS();
-+
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CONF, conf);
-+
-+ /* FIXME,
-+ * 1. since we have no wired ready signal, directly
-+ * calling this function is not gurantee to read right status under ready state.
-+ * 2. the other side, we can not determine how long to become ready, this timeout retry is nonsense.
-+ * 3. SUGGESTION: call nfc_read_status() from nfc_wait_ready(),
-+ * that is aware about caller (in sementics) and has snooze plused nfc ND_DONE.
-+ */
-+ retry = READ_STATUS_RETRY;
-+ do {
-+ nfc_st = ra_inl(NFC_STATUS);
-+ int_st = ra_inl(NFC_INT_ST);
-+
-+ ndelay(10);
-+ } while (!(int_st & INT_ST_RX_BUF_RDY) && retry--);
-+
-+ if (!(int_st & INT_ST_RX_BUF_RDY)) {
-+ printk("nfc_read_status: NFC fail, int_st(%x), retry:%x. nfc:%x, reset nfc and flash. \n",
-+ int_st, retry, nfc_st);
-+ nfc_all_reset();
-+ *status = NAND_STATUS_FAIL;
-+ return -1;
-+ }
-+
-+ *status = (char)(le32_to_cpu(ra_inl(NFC_DATA)) & 0x0ff);
-+ return 0;
-+}
-+
-+/**
-+ * @return !0, chip protect.
-+ * @return 0, chip not protected.
-+ */
-+static int nfc_check_wp(void)
-+{
-+ /* Check the WP bit */
-+#if !defined CONFIG_NOT_SUPPORT_WP
-+ return !!(ra_inl(NFC_CTRL) & 0x01);
-+#else
-+ char result = 0;
-+ int ret;
-+
-+ ret = _nfc_read_status(&result);
-+ //FIXME, if ret < 0
-+
-+ return !(result & NAND_STATUS_WP);
-+#endif
-+}
-+
-+#if !defined CONFIG_NOT_SUPPORT_RB
-+/*
-+ * @return !0, chip ready.
-+ * @return 0, chip busy.
-+ */
-+static int nfc_device_ready(void)
-+{
-+ /* Check the ready */
-+ return !!(ra_inl(NFC_STATUS) & 0x04);
-+}
-+#endif
-+
-+
-+/**
-+ * generic function to get data from flash.
-+ * @return data length reading from flash.
-+ */
-+static int _ra_nand_pull_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+ char *p = buf;
-+#else
-+ __u32 *p = (__u32 *)buf;
-+#endif
-+ int retry, int_st;
-+ unsigned int ret_data;
-+ int ret_size;
-+
-+ // receive data by use_gdma
-+ if (use_gdma) {
-+ //if (_ra_nand_dma_pull((unsigned long)p, len)) {
-+ if (1) {
-+ printk("%s: fail \n", __func__);
-+ len = -1; //return error
-+ }
-+
-+ return len;
-+ }
-+
-+ //fixme: retry count size?
-+ retry = READ_STATUS_RETRY;
-+ // no gdma
-+ while (len > 0) {
-+ int_st = ra_inl(NFC_INT_ST);
-+ if (int_st & INT_ST_RX_BUF_RDY) {
-+
-+ ret_data = ra_inl(NFC_DATA);
-+ ra_outl(NFC_INT_ST, INT_ST_RX_BUF_RDY);
-+#ifdef RW_DATA_BY_BYTE
-+ ret_size = sizeof(unsigned int);
-+ ret_size = min(ret_size, len);
-+ len -= ret_size;
-+ while (ret_size-- > 0) {
-+ //nfc is little endian
-+ *p++ = ret_data & 0x0ff;
-+ ret_data >>= 8;
-+ }
-+#else
-+ ret_size = min(len, 4);
-+ len -= ret_size;
-+ if (ret_size == 4)
-+ *p++ = ret_data;
-+ else {
-+ __u8 *q = (__u8 *)p;
-+ while (ret_size-- > 0) {
-+ *q++ = ret_data & 0x0ff;
-+ ret_data >>= 8;
-+ }
-+ p = (__u32 *)q;
-+ }
-+#endif
-+ retry = READ_STATUS_RETRY;
-+ }
-+ else if (int_st & INT_ST_ND_DONE) {
-+ break;
-+ }
-+ else {
-+ udelay(1);
-+ if (retry-- < 0)
-+ break;
-+ }
-+ }
-+
-+#ifdef RW_DATA_BY_BYTE
-+ return (int)(p - buf);
-+#else
-+ return ((int)p - (int)buf);
-+#endif
-+}
-+
-+/**
-+ * generic function to put data into flash.
-+ * @return data length writing into flash.
-+ */
-+static int _ra_nand_push_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+ char *p = buf;
-+#else
-+ __u32 *p = (__u32 *)buf;
-+#endif
-+ int retry, int_st;
-+ unsigned int tx_data = 0;
-+ int tx_size, iter = 0;
-+
-+ // receive data by use_gdma
-+ if (use_gdma) {
-+ //if (_ra_nand_dma_push((unsigned long)p, len))
-+ if (1)
-+ len = 0;
-+ printk("%s: fail \n", __func__);
-+ return len;
-+ }
-+
-+ // no gdma
-+ retry = READ_STATUS_RETRY;
-+ while (len > 0) {
-+ int_st = ra_inl(NFC_INT_ST);
-+ if (int_st & INT_ST_TX_BUF_RDY) {
-+#ifdef RW_DATA_BY_BYTE
-+ tx_size = min(len, (int)sizeof(unsigned long));
-+ for (iter = 0; iter < tx_size; iter++) {
-+ tx_data |= (*p++ << (8*iter));
-+ }
-+#else
-+ tx_size = min(len, 4);
-+ if (tx_size == 4)
-+ tx_data = (*p++);
-+ else {
-+ __u8 *q = (__u8 *)p;
-+ for (iter = 0; iter < tx_size; iter++)
-+ tx_data |= (*q++ << (8*iter));
-+ p = (__u32 *)q;
-+ }
-+#endif
-+ ra_outl(NFC_INT_ST, INT_ST_TX_BUF_RDY);
-+ ra_outl(NFC_DATA, tx_data);
-+ len -= tx_size;
-+ retry = READ_STATUS_RETRY;
-+ }
-+ else if (int_st & INT_ST_ND_DONE) {
-+ break;
-+ }
-+ else {
-+ udelay(1);
-+ if (retry-- < 0) {
-+ ra_dbg("%s p:%p buf:%p \n", __func__, p, buf);
-+ break;
-+ }
-+ }
-+ }
-+
-+
-+#ifdef RW_DATA_BY_BYTE
-+ return (int)(p - buf);
-+#else
-+ return ((int)p - (int)buf);
-+#endif
-+
-+}
-+
-+static int nfc_select_chip(struct ra_nand_chip *ra, int chipnr)
-+{
-+#if (CONFIG_NUMCHIPS == 1)
-+ if (!(chipnr < CONFIG_NUMCHIPS))
-+ return -1;
-+ return 0;
-+#else
-+ BUG();
-+#endif
-+}
-+
-+/** @return -1: chip_select fail
-+ * 0 : both CE and WP==0 are OK
-+ * 1 : CE OK and WP==1
-+ */
-+static int nfc_enable_chip(struct ra_nand_chip *ra, unsigned int offs, int read_only)
-+{
-+ int chipnr = offs >> ra->chip_shift;
-+
-+ ra_dbg("%s: offs:%x read_only:%x \n", __func__, offs, read_only);
-+
-+ chipnr = nfc_select_chip(ra, chipnr);
-+ if (chipnr < 0) {
-+ printk("%s: chip select error, offs(%x)\n", __func__, offs);
-+ return -1;
-+ }
-+
-+ if (!read_only)
-+ return nfc_check_wp();
-+
-+ return 0;
-+}
-+
-+/** wait nand chip becomeing ready and return queried status.
-+ * @param snooze: sleep time in ms unit before polling device ready.
-+ * @return status of nand chip
-+ * @return NAN_STATUS_FAIL if something unexpected.
-+ */
-+static int nfc_wait_ready(int snooze_ms)
-+{
-+ int retry;
-+ char status;
-+
-+ // wait nfc idle,
-+ if (snooze_ms == 0)
-+ snooze_ms = 1;
-+ else
-+ schedule_timeout(snooze_ms * HZ / 1000);
-+
-+ snooze_ms = retry = snooze_ms *1000000 / 100 ; // ndelay(100)
-+
-+ while (!NFC_TRANS_DONE() && retry--) {
-+ if (!cond_resched())
-+ ndelay(100);
-+ }
-+
-+ if (!NFC_TRANS_DONE()) {
-+ printk("nfc_wait_ready: no transaction done \n");
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+#if !defined (CONFIG_NOT_SUPPORT_RB)
-+ //fixme
-+ while(!(status = nfc_device_ready()) && retry--) {
-+ ndelay(100);
-+ }
-+
-+ if (status == 0) {
-+ printk("nfc_wait_ready: no device ready. \n");
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ _nfc_read_status(&status);
-+ return status;
-+#else
-+
-+ while(retry--) {
-+ _nfc_read_status(&status);
-+ if (status & NAND_STATUS_READY)
-+ break;
-+ ndelay(100);
-+ }
-+ if (retry<0)
-+ printk("nfc_wait_ready 2: no device ready, status(%x). \n", status);
-+
-+ return status;
-+#endif
-+}
-+
-+/**
-+ * return 0: erase OK
-+ * return -EIO: fail
-+ */
-+int nfc_erase_block(struct ra_nand_chip *ra, int row_addr)
-+{
-+ unsigned long cmd1, cmd2, bus_addr, conf;
-+ char status;
-+
-+ cmd1 = 0x60;
-+ cmd2 = 0xd0;
-+ bus_addr = row_addr;
-+ conf = 0x00511 | ((CFG_ROW_ADDR_CYCLE)<<16);
-+
-+ // set NFC
-+ ra_dbg("%s: cmd1: %lx, cmd2:%lx bus_addr: %lx, conf: %lx \n",
-+ __func__, cmd1, cmd2, bus_addr, conf);
-+
-+ //fixme, should we check nfc status?
-+ CLEAR_INT_STATUS();
-+
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD2, cmd2);
-+ ra_outl(NFC_ADDR, bus_addr);
-+ ra_outl(NFC_CONF, conf);
-+
-+ status = nfc_wait_ready(3); //erase wait 3ms
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+
-+}
-+
-+static inline int _nfc_read_raw_data(int cmd1, int cmd2, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+ int ret;
-+
-+ CLEAR_INT_STATUS();
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD2, cmd2);
-+ ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ ra_outl(NFC_ADDR2, bus_addr2);
-+#endif
-+ ra_outl(NFC_CONF, conf);
-+
-+ ret = _ra_nand_pull_data(buf, len, 0);
-+ if (ret != len) {
-+ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ //FIXME, this section is not necessary
-+ ret = nfc_wait_ready(0); //wait ready
-+ /* to prevent the DATA FIFO 's old data from next operation */
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ if (ret & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline int _nfc_write_raw_data(int cmd1, int cmd3, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+ int ret;
-+
-+ CLEAR_INT_STATUS();
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD3, cmd3);
-+ ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ ra_outl(NFC_ADDR2, bus_addr2);
-+#endif
-+ ra_outl(NFC_CONF, conf);
-+
-+ ret = _ra_nand_push_data(buf, len, 0);
-+ if (ret != len) {
-+ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ ret = nfc_wait_ready(1); //write wait 1ms
-+ /* to prevent the DATA FIFO 's old data from next operation */
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ if (ret & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_read_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int status;
-+
-+ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+ // constrain of nfc read function
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ BUG_ON (len > 60); //problem of rx-buffer overrun
-+#endif
-+ BUG_ON (offs >> ra->oob_shift); //page boundry
-+ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+ if (is_nand_page_2048) {
-+ bus_addr += CFG_PAGESIZE;
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x0;
-+ cmd2 = 0x30;
-+ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ else {
-+ cmd1 = 0x50;
-+ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ if (ecc_en)
-+ conf |= (1<<3);
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ ra_dbg("%s: cmd1:%x, bus_addr:%x, conf:%x, len:%x, flag:%x\n",
-+ __func__, cmd1, bus_addr, conf, len, flags);
-+
-+ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail\n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_write_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd3=0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ int use_gdma;
-+ int status;
-+
-+ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+ // constrain of nfc read function
-+
-+ BUG_ON (offs >> ra->oob_shift); //page boundry
-+ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+ if (is_nand_page_2048) {
-+ cmd1 = 0x80;
-+ cmd3 = 0x10;
-+ bus_addr += CFG_PAGESIZE;
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ conf = 0x001123 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
-+ }
-+ else {
-+ cmd1 = 0x08050;
-+ cmd3 = 0x10;
-+ conf = 0x001223 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
-+ }
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ // set NFC
-+ ra_dbg("%s: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
-+ __func__, cmd1, cmd3, bus_addr, conf, len);
-+
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+
-+
-+#if !defined (WORKAROUND_RX_BUF_OV)
-+static int one_bit_correction(char *ecc, char *expected, int *bytes, int *bits);
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+ int ret, i;
-+ char *p, *e;
-+ int ecc;
-+
-+ //ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+ if (mode == FL_WRITING) {
-+ int len = CFG_PAGESIZE + CFG_PAGE_OOBSIZE;
-+ int conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ conf |= (1<<3); //(ecc_en)
-+ //conf |= (1<<2); // (use_gdma)
-+
-+ p = ra->readback_buffers;
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
-+ if (ret == 0)
-+ goto ecc_check;
-+
-+ //FIXME, double comfirm
-+ printk("%s: read back fail, try again \n",__func__);
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
-+ if (ret != 0) {
-+ printk("\t%s: read back fail agian \n",__func__);
-+ goto bad_block;
-+ }
-+ }
-+ else if (mode == FL_READING) {
-+ p = buf;
-+ }
-+ else
-+ return -2;
-+
-+ecc_check:
-+ p += CFG_PAGESIZE;
-+ if (!is_nand_page_2048) {
-+ ecc = ra_inl(NFC_ECC);
-+ if (ecc == 0) //clean page.
-+ return 0;
-+ e = (char*)&ecc;
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != (char)0xff)
-+ break;
-+ if (i == CONFIG_ECC_BYTES - 1) {
-+ printk("skip ecc 0xff at page %x\n", page);
-+ return 0;
-+ }
-+ }
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+ return -1;
-+ }
-+ }
-+ }
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ else {
-+ int ecc2, ecc3, ecc4, qsz;
-+ char *e2, *e3, *e4;
-+ int correction_flag = 0;
-+ ecc = ra_inl(NFC_ECC_P1);
-+ ecc2 = ra_inl(NFC_ECC_P2);
-+ ecc3 = ra_inl(NFC_ECC_P3);
-+ ecc4 = ra_inl(NFC_ECC_P4);
-+ e = (char*)&ecc;
-+ e2 = (char*)&ecc2;
-+ e3 = (char*)&ecc3;
-+ e4 = (char*)&ecc4;
-+ qsz = CFG_PAGE_OOBSIZE / 4;
-+ if (ecc == 0 && ecc2 == 0 && ecc3 == 0 && ecc4 == 0)
-+ return 0;
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz*2) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz*3) != (char)0xff)
-+ break;
-+ if (i == CONFIG_ECC_BYTES - 1) {
-+ printk("skip ecc 0xff at page %x\n", page);
-+ return 0;
-+ }
-+ }
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+ correction_flag |= 0x1;
-+ }
-+ if (*(p + eccpos + qsz) != *(e2 + i)) {
-+ printk("%s mode:%s, invalid ecc2, page: %x read:%x %x %x, ecc2:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz), *(p+ CONFIG_ECC_OFFSET+1+qsz), *(p+ CONFIG_ECC_OFFSET+2+qsz), ecc2);
-+ correction_flag |= 0x2;
-+ }
-+ if (*(p + eccpos + qsz*2) != *(e3 + i)) {
-+ printk("%s mode:%s, invalid ecc3, page: %x read:%x %x %x, ecc3:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz*2), *(p+ CONFIG_ECC_OFFSET+1+qsz*2), *(p+ CONFIG_ECC_OFFSET+2+qsz*2), ecc3);
-+ correction_flag |= 0x4;
-+ }
-+ if (*(p + eccpos + qsz*3) != *(e4 + i)) {
-+ printk("%s mode:%s, invalid ecc4, page: %x read:%x %x %x, ecc4:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz*3), *(p+ CONFIG_ECC_OFFSET+1+qsz*3), *(p+ CONFIG_ECC_OFFSET+2+qsz*3), ecc4);
-+ correction_flag |= 0x8;
-+ }
-+ }
-+
-+ if (correction_flag)
-+ {
-+ printk("trying to do correction!\n");
-+ if (correction_flag & 0x1)
-+ {
-+ int bytes, bits;
-+ char *pBuf = p - CFG_PAGESIZE;
-+
-+ if (one_bit_correction(p + CONFIG_ECC_OFFSET, e, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("1. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+
-+ if (correction_flag & 0x2)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/4;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz), e2, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("2. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ if (correction_flag & 0x4)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/2;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 2), e3, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("3. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ if (correction_flag & 0x8)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE*3/4;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 3), e4, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("4. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ }
-+
-+ }
-+#endif
-+ return 0;
-+
-+bad_block:
-+ return -1;
-+}
-+
-+#else
-+
-+void ranfc_dump(void)
-+{
-+ int i;
-+ for (i=0; i<11; i++) {
-+ if (i==6)
-+ continue;
-+ printk("%x: %x \n", NFC_BASE + i*4, ra_inl(NFC_BASE + i*4));
-+ }
-+}
-+
-+/**
-+ * @return 0, ecc OK or corrected.
-+ * @return NAND_STATUS_FAIL, ecc fail.
-+ */
-+
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+ int ret, i;
-+ char *p, *e;
-+ int ecc;
-+
-+ if (ranfc_verify == 0)
-+ return 0;
-+
-+ ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+ if (mode == FL_WRITING) { // read back and memcmp
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
-+ if (ret != 0) //double comfirm
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
-+
-+ if (ret != 0) {
-+ printk("%s: mode:%x read back fail \n", __func__, mode);
-+ return -1;
-+ }
-+ return memcmp(buf, ra->readback_buffers, 1<<ra->page_shift);
-+ }
-+
-+ if (mode == FL_READING) {
-+#if 0
-+ if (ra->sandbox_page == 0)
-+ return 0;
-+
-+ ret = nfc_write_page(ra, buf, ra->sandbox_page, FLAG_USE_GDMA | FLAG_ECC_EN);
-+ if (ret != 0) {
-+ printk("%s, fail write sandbox_page \n", __func__);
-+ return -1;
-+ }
-+#else
-+ /** @note:
-+ * The following command is actually not 'write' command to drive NFC to write flash.
-+ * However, it can make NFC to calculate ECC, that will be used to compare with original ones.
-+ * --YT
-+ */
-+ unsigned int conf = 0x001223| (CFG_ADDR_CYCLE<<16) | (0x200 << 20) | (1<<3) | (1<<2);
-+ _nfc_write_raw_data(0xff, 0xff, ra->sandbox_page<<ra->page_shift, conf, buf, 0x200, FLAG_USE_GDMA);
-+#endif
-+
-+ ecc = ra_inl(NFC_ECC);
-+ if (ecc == 0) //clean page.
-+ return 0;
-+ e = (char*)&ecc;
-+ p = buf + (1<<ra->page_shift);
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, write:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+
-+ for (i=0; i<528; i++)
-+ printk("%-2x \n", *(buf + i));
-+ return -1;
-+ }
-+ }
-+ return 0;
-+ }
-+
-+ return -1;
-+
-+}
-+
-+#endif
-+
-+
-+/**
-+ * @return -EIO, writing size is less than a page
-+ * @return 0, OK
-+ */
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int size, offs;
-+ int status = 0;
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+
-+ page = page & (CFG_CHIPSIZE - 1); // chip boundary
-+ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+ offs = 0;
-+
-+ while (size > 0) {
-+ int len;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ len = min(60, size);
-+#else
-+ len = size;
-+#endif
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8)-1));
-+ if (is_nand_page_2048) {
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x0;
-+ cmd2 = 0x30;
-+ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ else {
-+ if (offs & ~(CFG_PAGESIZE-1))
-+ cmd1 = 0x50;
-+ else if (offs & ~((1<<CFG_COLUMN_ADDR_CYCLE*8)-1))
-+ cmd1 = 0x01;
-+ else
-+ cmd1 = 0;
-+
-+ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+#if !defined (WORKAROUND_RX_BUF_OV)
-+ if (ecc_en)
-+ conf |= (1<<3);
-+#endif
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf+offs, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ offs += len;
-+ size -= len;
-+ }
-+
-+ // verify and correct ecc
-+ if ((flags & (FLAG_VERIFY | FLAG_ECC_EN)) == (FLAG_VERIFY | FLAG_ECC_EN)) {
-+ status = nfc_ecc_verify(ra, buf, page, FL_READING);
-+ if (status != 0) {
-+ printk("%s: fail, buf:%x, page:%x, flag:%x\n",
-+ __func__, (unsigned int)buf, page, flags);
-+ return -EBADMSG;
-+ }
-+ }
-+ else {
-+ // fix,e not yet support
-+ ra->buffers_page = -1; //cached
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/**
-+ * @return -EIO, fail to write
-+ * @return 0, OK
-+ */
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd3, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int size;
-+ char status;
-+ uint8_t *oob = buf + (1<<ra->page_shift);
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+
-+ oob[ra->badblockpos] = 0xff; //tag as good block.
-+ ra->buffers_page = -1; //cached
-+
-+ page = page & (CFG_CHIPSIZE-1); //chip boundary
-+ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)); //write_page always write from offset 0.
-+
-+ if (is_nand_page_2048) {
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x80;
-+ cmd3 = 0x10;
-+ conf = 0x001123| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
-+ }
-+ else {
-+ cmd1 = 0x8000;
-+ cmd3 = 0x10;
-+ conf = 0x001223| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
-+}
-+ if (ecc_en)
-+ conf |= (1<<3); //enable ecc
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ // set NFC
-+ ra_dbg("nfc_write_page: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
-+ cmd1, cmd3, bus_addr, conf, size);
-+
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+
-+ if (flags & FLAG_VERIFY) { // verify and correct ecc
-+ status = nfc_ecc_verify(ra, buf, page, FL_WRITING);
-+
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+ if (((random32() & 0x1ff) == 0x0) && (page >= 0x100)) // randomly create bad block
-+ {
-+ printk("hmm... create a bad block at page %x\n", (bus_addr >> 16));
-+ status = -1;
-+ }
-+#endif
-+
-+ if (status != 0) {
-+ printk("%s: ecc_verify fail: ret:%x \n", __func__, status);
-+ oob[ra->badblockpos] = 0x33;
-+ page -= page % (CFG_BLOCKSIZE/CFG_PAGESIZE);
-+ printk("create a bad block at page %x\n", page);
-+ if (!is_nand_page_2048)
-+ status = nfc_write_oob(ra, page, ra->badblockpos, oob+ra->badblockpos, 1, flags);
-+ else
-+ {
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+ nfc_write_oob(ra, page, 0, oob, 16, FLAG_NONE);
-+ }
-+ return -EBADMSG;
-+ }
-+ }
-+
-+
-+ ra->buffers_page = page; //cached
-+ return 0;
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process
-+ *************************************************************/
-+
-+/**
-+ * nand_release_device - [GENERIC] release chip
-+ * @mtd: MTD device structure
-+ *
-+ * Deselect, release chip lock and wake up anyone waiting on the device
-+ */
-+static void nand_release_device(struct ra_nand_chip *ra)
-+{
-+ /* De-select the NAND device */
-+ nfc_select_chip(ra, -1);
-+
-+ /* Release the controller and the chip */
-+ ra->state = FL_READY;
-+
-+ mutex_unlock(ra->controller);
-+}
-+
-+/**
-+ * nand_get_device - [GENERIC] Get chip for selected access
-+ * @chip: the nand chip descriptor
-+ * @mtd: MTD device structure
-+ * @new_state: the state which is requested
-+ *
-+ * Get the device and lock it for exclusive access
-+ */
-+static int
-+nand_get_device(struct ra_nand_chip *ra, int new_state)
-+{
-+ int ret = 0;
-+
-+ ret = mutex_lock_interruptible(ra->controller);
-+ if (!ret)
-+ ra->state = new_state;
-+
-+ return ret;
-+
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process
-+ *************************************************************/
-+
-+int nand_bbt_get(struct ra_nand_chip *ra, int block)
-+{
-+ int byte, bits;
-+ bits = block * BBTTAG_BITS;
-+
-+ byte = bits / 8;
-+ bits = bits % 8;
-+
-+ return (ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK;
-+}
-+
-+int nand_bbt_set(struct ra_nand_chip *ra, int block, int tag)
-+{
-+ int byte, bits;
-+ bits = block * BBTTAG_BITS;
-+
-+ byte = bits / 8;
-+ bits = bits % 8;
-+
-+ // If previous tag is bad, dont overwrite it
-+ if (((ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK) == BBT_TAG_BAD)
-+ {
-+ return BBT_TAG_BAD;
-+ }
-+
-+ ra->bbt[byte] = (ra->bbt[byte] & ~(BBTTAG_BITS_MASK << bits)) | ((tag & BBTTAG_BITS_MASK) << bits);
-+
-+ return tag;
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+int nand_block_checkbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+ int page, block;
-+ int ret = 4;
-+ unsigned int tag;
-+ char *str[]= {"UNK", "RES", "BAD", "GOOD"};
-+
-+ if (ranfc_bbt == 0)
-+ return 0;
-+
-+ {
-+ // align with chip
-+
-+ offs = offs & ((1<<ra->chip_shift) -1);
-+
-+ page = offs >> ra->page_shift;
-+ block = offs >> ra->erase_shift;
-+ }
-+
-+ tag = nand_bbt_get(ra, block);
-+
-+ if (tag == BBT_TAG_UNKNOWN) {
-+ ret = nfc_read_oob(ra, page, ra->badblockpos, (char*)&tag, 1, FLAG_NONE);
-+ if (ret == 0)
-+ tag = ((le32_to_cpu(tag) & 0x0ff) == 0x0ff) ? BBT_TAG_GOOD : BBT_TAG_BAD;
-+ else
-+ tag = BBT_TAG_BAD;
-+
-+ nand_bbt_set(ra, block, tag);
-+ }
-+
-+ if (tag != BBT_TAG_GOOD) {
-+ printk("%s: offs:%x tag: %s \n", __func__, (unsigned int)offs, str[tag]);
-+ return 1;
-+ }
-+ else
-+ return 0;
-+
-+}
-+
-+
-+
-+/**
-+ * nand_block_markbad -
-+ */
-+int nand_block_markbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+ int page, block;
-+ int ret = 4;
-+ unsigned int tag;
-+ char *ecc;
-+
-+ // align with chip
-+ ra_dbg("%s offs: %x \n", __func__, (int)offs);
-+
-+ offs = offs & ((1<<ra->chip_shift) -1);
-+
-+ page = offs >> ra->page_shift;
-+ block = offs >> ra->erase_shift;
-+
-+ tag = nand_bbt_get(ra, block);
-+
-+ if (tag == BBT_TAG_BAD) {
-+ printk("%s: mark repeatedly \n", __func__);
-+ return 0;
-+ }
-+
-+ // new tag as bad
-+ tag =BBT_TAG_BAD;
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_NONE);
-+ if (ret != 0) {
-+ printk("%s: fail to read bad block tag \n", __func__);
-+ goto tag_bbt;
-+ }
-+
-+ ecc = &ra->buffers[(1<<ra->page_shift)+ra->badblockpos];
-+ if (*ecc == (char)0x0ff) {
-+ //tag into flash
-+ *ecc = (char)tag;
-+ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA);
-+ if (ret)
-+ printk("%s: fail to write bad block tag \n", __func__);
-+
-+ }
-+
-+tag_bbt:
-+ //update bbt
-+ nand_bbt_set(ra, block, tag);
-+
-+ return 0;
-+}
-+
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+/**
-+ * to find a bad block for ecc verify of read_page
-+ */
-+unsigned int nand_bbt_find_sandbox(struct ra_nand_chip *ra)
-+{
-+ loff_t offs = 0;
-+ int chipsize = 1 << ra->chip_shift;
-+ int blocksize = 1 << ra->erase_shift;
-+
-+
-+ while (offs < chipsize) {
-+ if (nand_block_checkbad(ra, offs)) //scan and verify the unknown tag
-+ break;
-+ offs += blocksize;
-+ }
-+
-+ if (offs >= chipsize) {
-+ offs = chipsize - blocksize;
-+ }
-+
-+ nand_bbt_set(ra, (unsigned int)offs>>ra->erase_shift, BBT_TAG_RES); // tag bbt only, instead of update badblockpos of flash.
-+ return (offs >> ra->page_shift);
-+}
-+#endif
-+
-+
-+
-+/**
-+ * nand_erase_nand - [Internal] erase block(s)
-+ * @mtd: MTD device structure
-+ * @instr: erase instruction
-+ * @allowbbt: allow erasing the bbt area
-+ *
-+ * Erase one ore more blocks
-+ */
-+int _nand_erase_nand(struct ra_nand_chip *ra, struct erase_info *instr)
-+{
-+ int page, len, status, ret;
-+ unsigned int addr, blocksize = 1<<ra->erase_shift;
-+
-+ ra_dbg("%s: start:%x, len:%x \n", __func__,
-+ (unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+//#define BLOCK_ALIGNED(a) ((a) & (blocksize - 1)) // already defined
-+
-+ if (BLOCK_ALIGNED(instr->addr) || BLOCK_ALIGNED(instr->len)) {
-+ ra_dbg("%s: erase block not aligned, addr:%x len:%x\n", __func__, instr->addr, instr->len);
-+ return -EINVAL;
-+ }
-+
-+ instr->fail_addr = 0xffffffff;
-+
-+ len = instr->len;
-+ addr = instr->addr;
-+ instr->state = MTD_ERASING;
-+
-+ while (len) {
-+
-+ page = (int)(addr >> ra->page_shift);
-+
-+ /* select device and check wp */
-+ if (nfc_enable_chip(ra, addr, 0)) {
-+ printk("%s: nand is write protected \n", __func__);
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* if we have a bad block, we do not erase bad blocks */
-+ if (nand_block_checkbad(ra, addr)) {
-+ printk(KERN_WARNING "nand_erase: attempt to erase a "
-+ "bad block at 0x%08x\n", addr);
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /*
-+ * Invalidate the page cache, if we erase the block which
-+ * contains the current cached page
-+ */
-+ if (BLOCK_ALIGNED(addr) == BLOCK_ALIGNED(ra->buffers_page << ra->page_shift))
-+ ra->buffers_page = -1;
-+
-+ status = nfc_erase_block(ra, page);
-+ /* See if block erase succeeded */
-+ if (status) {
-+ printk("%s: failed erase, page 0x%08x\n", __func__, page);
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = (page << ra->page_shift);
-+ goto erase_exit;
-+ }
-+
-+
-+ /* Increment page address and decrement length */
-+ len -= blocksize;
-+ addr += blocksize;
-+
-+ }
-+ instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+
-+ ret = ((instr->state == MTD_ERASE_DONE) ? 0 : -EIO);
-+ /* Do call back function */
-+ if (!ret)
-+ mtd_erase_callback(instr);
-+
-+ if (ret) {
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ }
-+
-+ /* Return more or less happy */
-+ return ret;
-+}
-+
-+static int
-+nand_write_oob_buf(struct ra_nand_chip *ra, uint8_t *buf, uint8_t *oob, size_t size,
-+ int mode, int ooboffs)
-+{
-+ size_t oobsize = 1<<ra->oob_shift;
-+ struct nand_oobfree *free;
-+ uint32_t woffs = ooboffs;
-+ int retsize = 0;
-+
-+ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
-+
-+ switch(mode) {
-+ case MTD_OPS_PLACE_OOB:
-+ case MTD_OPS_RAW:
-+ if (ooboffs > oobsize)
-+ return -1;
-+
-+ size = min(size, oobsize - ooboffs);
-+ memcpy(buf + ooboffs, oob, size);
-+ retsize = size;
-+ break;
-+
-+ case MTD_OPS_AUTO_OOB:
-+ if (ooboffs > ra->oob->oobavail)
-+ return -1;
-+
-+ while (size) {
-+ for(free = ra->oob->oobfree; free->length && size; free++) {
-+ int wlen = free->length - woffs;
-+ int bytes = 0;
-+
-+ /* Write request not from offset 0 ? */
-+ if (wlen <= 0) {
-+ woffs = -wlen;
-+ continue;
-+ }
-+
-+ bytes = min_t(size_t, size, wlen);
-+ memcpy (buf + free->offset + woffs, oob, bytes);
-+ woffs = 0;
-+ oob += bytes;
-+ size -= bytes;
-+ retsize += bytes;
-+ }
-+ buf += oobsize;
-+ }
-+ break;
-+
-+ default:
-+ BUG();
-+ }
-+
-+ return retsize;
-+}
-+
-+static int nand_read_oob_buf(struct ra_nand_chip *ra, uint8_t *oob, size_t size,
-+ int mode, int ooboffs)
-+{
-+ size_t oobsize = 1<<ra->oob_shift;
-+ uint8_t *buf = ra->buffers + (1<<ra->page_shift);
-+ int retsize=0;
-+
-+ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
-+
-+ switch(mode) {
-+ case MTD_OPS_PLACE_OOB:
-+ case MTD_OPS_RAW:
-+ if (ooboffs > oobsize)
-+ return -1;
-+
-+ size = min(size, oobsize - ooboffs);
-+ memcpy(oob, buf + ooboffs, size);
-+ return size;
-+
-+ case MTD_OPS_AUTO_OOB: {
-+ struct nand_oobfree *free;
-+ uint32_t woffs = ooboffs;
-+
-+ if (ooboffs > ra->oob->oobavail)
-+ return -1;
-+
-+ size = min(size, ra->oob->oobavail - ooboffs);
-+ for(free = ra->oob->oobfree; free->length && size; free++) {
-+ int wlen = free->length - woffs;
-+ int bytes = 0;
-+
-+ /* Write request not from offset 0 ? */
-+ if (wlen <= 0) {
-+ woffs = -wlen;
-+ continue;
-+ }
-+
-+ bytes = min_t(size_t, size, wlen);
-+ memcpy (oob, buf + free->offset + woffs, bytes);
-+ woffs = 0;
-+ oob += bytes;
-+ size -= bytes;
-+ retsize += bytes;
-+ }
-+ return retsize;
-+ }
-+ default:
-+ BUG();
-+ }
-+
-+ return -1;
-+}
-+
-+/**
-+ * nand_do_write_ops - [Internal] NAND write with ECC
-+ * @mtd: MTD device structure
-+ * @to: offset to write to
-+ * @ops: oob operations description structure
-+ *
-+ * NAND write with ECC
-+ */
-+static int nand_do_write_ops(struct ra_nand_chip *ra, loff_t to,
-+ struct mtd_oob_ops *ops)
-+{
-+ int page;
-+ uint32_t datalen = ops->len;
-+ uint32_t ooblen = ops->ooblen;
-+ uint8_t *oob = ops->oobbuf;
-+ uint8_t *data = ops->datbuf;
-+ int pagesize = (1<<ra->page_shift);
-+ int pagemask = (pagesize -1);
-+ int oobsize = 1<<ra->oob_shift;
-+ loff_t addr = to;
-+ //int i = 0; //for ra_dbg only
-+
-+ ra_dbg("%s: to:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x oobmode:%x \n",
-+ __func__, (unsigned int)to, data, oob, datalen, ooblen, ops->ooboffs, ops->mode);
-+
-+ ops->retlen = 0;
-+ ops->oobretlen = 0;
-+
-+
-+ /* Invalidate the page cache, when we write to the cached page */
-+ ra->buffers_page = -1;
-+
-+
-+ if (data ==0)
-+ datalen = 0;
-+
-+ // oob sequential (burst) write
-+ if (datalen == 0 && ooblen) {
-+ int len = ((ooblen + ops->ooboffs) + (ra->oob->oobavail - 1)) / ra->oob->oobavail * oobsize;
-+
-+ /* select chip, and check if it is write protected */
-+ if (nfc_enable_chip(ra, addr, 0))
-+ return -EIO;
-+
-+ //FIXME, need sanity check of block boundary
-+ page = (int)((to & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+ memset(ra->buffers, 0x0ff, pagesize);
-+ //fixme, should we reserve the original content?
-+ if (ops->mode == MTD_OPS_AUTO_OOB) {
-+ nfc_read_oob(ra, page, 0, ra->buffers, len, FLAG_NONE);
-+ }
-+ //prepare buffers
-+ if (ooblen != 8)
-+ {
-+ nand_write_oob_buf(ra, ra->buffers, oob, ooblen, ops->mode, ops->ooboffs);
-+ // write out buffer to chip
-+ nfc_write_oob(ra, page, 0, ra->buffers, len, FLAG_USE_GDMA);
-+ }
-+
-+ ops->oobretlen = ooblen;
-+ ooblen = 0;
-+ }
-+
-+ // data sequential (burst) write
-+ if (datalen && ooblen == 0) {
-+ // ranfc can not support write_data_burst, since hw-ecc and fifo constraints..
-+ }
-+
-+ // page write
-+ while(datalen || ooblen) {
-+ int len;
-+ int ret;
-+ int offs;
-+ int ecc_en = 0;
-+
-+ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+
-+ /* select chip, and check if it is write protected */
-+ if (nfc_enable_chip(ra, addr, 0))
-+ return -EIO;
-+
-+ // oob write
-+ if (ops->mode == MTD_OPS_AUTO_OOB) {
-+ //fixme, this path is not yet varified
-+ nfc_read_oob(ra, page, 0, ra->buffers + pagesize, oobsize, FLAG_NONE);
-+ }
-+ if (oob && ooblen > 0) {
-+ len = nand_write_oob_buf(ra, ra->buffers + pagesize, oob, ooblen, ops->mode, ops->ooboffs);
-+ if (len < 0)
-+ return -EINVAL;
-+
-+ oob += len;
-+ ops->oobretlen += len;
-+ ooblen -= len;
-+ }
-+
-+ // data write
-+ offs = addr & pagemask;
-+ len = min_t(size_t, datalen, pagesize - offs);
-+ if (data && len > 0) {
-+ memcpy(ra->buffers + offs, data, len); // we can not sure ops->buf wether is DMA-able.
-+
-+ data += len;
-+ datalen -= len;
-+ ops->retlen += len;
-+
-+ ecc_en = FLAG_ECC_EN;
-+ }
-+ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA | FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0 : ecc_en ));
-+ if (ret) {
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ return ret;
-+ }
-+
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+
-+ addr = (page+1) << ra->page_shift;
-+
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * nand_do_read_ops - [Internal] Read data with ECC
-+ *
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @ops: oob ops structure
-+ *
-+ * Internal function. Called with chip held.
-+ */
-+static int nand_do_read_ops(struct ra_nand_chip *ra, loff_t from,
-+ struct mtd_oob_ops *ops)
-+{
-+ int page;
-+ uint32_t datalen = ops->len;
-+ uint32_t ooblen = ops->ooblen;
-+ uint8_t *oob = ops->oobbuf;
-+ uint8_t *data = ops->datbuf;
-+ int pagesize = (1<<ra->page_shift);
-+ int pagemask = (pagesize -1);
-+ loff_t addr = from;
-+ //int i = 0; //for ra_dbg only
-+
-+ ra_dbg("%s: addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+ ops->retlen = 0;
-+ ops->oobretlen = 0;
-+ if (data == 0)
-+ datalen = 0;
-+
-+
-+ while(datalen || ooblen) {
-+ int len;
-+ int ret;
-+ int offs;
-+
-+ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+ /* select chip */
-+ if (nfc_enable_chip(ra, addr, 1) < 0)
-+ return -EIO;
-+
-+ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift);
-+
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+ //FIXME, something strange here, some page needs 2 more tries to guarantee read success.
-+ if (ret) {
-+ printk("read again:\n");
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+
-+ if (ret) {
-+ printk("read again fail \n");
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ if ((ret != -EUCLEAN) && (ret != -EBADMSG)) {
-+ return ret;
-+ }
-+ else {
-+ /* ecc verification fail, but data need to be returned. */
-+ }
-+ }
-+ else {
-+ printk(" read agian susccess \n");
-+ }
-+ }
-+
-+ // oob read
-+ if (oob && ooblen > 0) {
-+ len = nand_read_oob_buf(ra, oob, ooblen, ops->mode, ops->ooboffs);
-+ if (len < 0) {
-+ printk("nand_read_oob_buf: fail return %x \n", len);
-+ return -EINVAL;
-+ }
-+
-+ oob += len;
-+ ops->oobretlen += len;
-+ ooblen -= len;
-+ }
-+
-+ // data read
-+ offs = addr & pagemask;
-+ len = min_t(size_t, datalen, pagesize - offs);
-+ if (data && len > 0) {
-+ memcpy(data, ra->buffers + offs, len); // we can not sure ops->buf wether is DMA-able.
-+
-+ data += len;
-+ datalen -= len;
-+ ops->retlen += len;
-+ if (ret)
-+ return ret;
-+ }
-+
-+
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+ // address go further to next page, instead of increasing of length of write. This avoids some special cases wrong.
-+ addr = (page+1) << ra->page_shift;
-+ }
-+ return 0;
-+}
-+
-+static int
-+ramtd_nand_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct ra_nand_chip *ra = (struct ra_nand_chip *)mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: start:%x, len:%x \n", __func__,
-+ (unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+ nand_get_device(ra, FL_ERASING);
-+ ret = _nand_erase_nand((struct ra_nand_chip *)mtd->priv, instr);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const uint8_t *buf)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ struct mtd_oob_ops ops;
-+ int ret;
-+
-+ ra_dbg("%s: to 0x%x len=0x%x\n", __func__, to, len);
-+
-+ if ((to + len) > mtd->size)
-+ return -EINVAL;
-+
-+ if (!len)
-+ return 0;
-+
-+ nand_get_device(ra, FL_WRITING);
-+
-+ memset(&ops, 0, sizeof(ops));
-+ ops.len = len;
-+ ops.datbuf = (uint8_t *)buf;
-+ ops.oobbuf = NULL;
-+ ops.mode = MTD_OPS_AUTO_OOB;
-+
-+ ret = nand_do_write_ops(ra, to, &ops);
-+
-+ *retlen = ops.retlen;
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, uint8_t *buf)
-+{
-+
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+ struct mtd_oob_ops ops;
-+
-+ ra_dbg("%s: mtd:%p from:%x, len:%x, buf:%p \n", __func__, mtd, (unsigned int)from, len, buf);
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size)
-+ return -EINVAL;
-+ if (!len)
-+ return 0;
-+
-+ nand_get_device(ra, FL_READING);
-+
-+ memset(&ops, 0, sizeof(ops));
-+ ops.len = len;
-+ ops.datbuf = buf;
-+ ops.oobbuf = NULL;
-+ ops.mode = MTD_OPS_AUTO_OOB;
-+
-+ ret = nand_do_read_ops(ra, from, &ops);
-+
-+ *retlen = ops.retlen;
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+
-+}
-+
-+static int
-+ramtd_nand_readoob(struct mtd_info *mtd, loff_t from,
-+ struct mtd_oob_ops *ops)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: \n", __func__);
-+
-+ nand_get_device(ra, FL_READING);
-+
-+ ret = nand_do_read_ops(ra, from, ops);
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_writeoob(struct mtd_info *mtd, loff_t to,
-+ struct mtd_oob_ops *ops)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ nand_get_device(ra, FL_READING);
-+ ret = nand_do_write_ops(ra, to, ops);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_block_isbad(struct mtd_info *mtd, loff_t offs)
-+{
-+ if (offs > mtd->size)
-+ return -EINVAL;
-+
-+ return nand_block_checkbad((struct ra_nand_chip *)mtd->priv, offs);
-+}
-+
-+static int
-+ramtd_nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: \n", __func__);
-+ nand_get_device(ra, FL_WRITING);
-+ ret = nand_block_markbad(ra, ofs);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+// 1-bit error detection
-+static int one_bit_correction(char *ecc1, char *ecc2, int *bytes, int *bits)
-+{
-+ // check if ecc and expected are all valid
-+ char *p, nibble, crumb;
-+ int i, xor, iecc1 = 0, iecc2 = 0;
-+
-+ printk("correction : %x %x %x\n", ecc1[0], ecc1[1], ecc1[2]);
-+ printk("correction : %x %x %x\n", ecc2[0], ecc2[1], ecc2[2]);
-+
-+ p = (char *)ecc1;
-+ for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+ {
-+ nibble = *(p+i) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ nibble = ((*(p+i)) >> 4) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ }
-+
-+ p = (char *)ecc2;
-+ for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+ {
-+ nibble = *(p+i) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ nibble = ((*(p+i)) >> 4) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ }
-+
-+ memcpy(&iecc1, ecc1, 3);
-+ memcpy(&iecc2, ecc2, 3);
-+
-+ xor = iecc1 ^ iecc2;
-+ printk("xor = %x (%x %x)\n", xor, iecc1, iecc2);
-+
-+ *bytes = 0;
-+ for (i = 0; i < 9; i++)
-+ {
-+ crumb = (xor >> (2*i)) & 0x3;
-+ if ((crumb == 0x0) || (crumb == 0x3))
-+ return -1;
-+ if (crumb == 0x2)
-+ *bytes += (1 << i);
-+ }
-+
-+ *bits = 0;
-+ for (i = 0; i < 3; i++)
-+ {
-+ crumb = (xor >> (18 + 2*i)) & 0x3;
-+ if ((crumb == 0x0) || (crumb == 0x3))
-+ return -1;
-+ if (crumb == 0x2)
-+ *bits += (1 << i);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+
-+/************************************************************
-+ * the init/exit section.
-+ */
-+
-+static struct nand_ecclayout ra_oob_layout = {
-+ .eccbytes = CONFIG_ECC_BYTES,
-+ .eccpos = {5, 6, 7},
-+ .oobfree = {
-+ {.offset = 0, .length = 4},
-+ {.offset = 8, .length = 8},
-+ {.offset = 0, .length = 0}
-+ },
-+#define RA_CHIP_OOB_AVAIL (4+8)
-+ .oobavail = RA_CHIP_OOB_AVAIL,
-+ // 5th byte is bad-block flag.
-+};
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+ struct mtd_part_parser_data ppdata;
-+ struct ra_nand_chip *ra;
-+ int alloc_size, bbt_size, buffers_size, reg, err;
-+ unsigned char chip_mode = 12;
-+
-+/* if(ra_check_flash_type()!=BOOT_FROM_NAND) {
-+ return 0;
-+ }*/
-+
-+ //FIXME: config 512 or 2048-byte page according to HWCONF
-+#if defined (CONFIG_RALINK_RT6855A)
-+ reg = ra_inl(RALINK_SYSCTL_BASE+0x8c);
-+ chip_mode = ((reg>>28) & 0x3)|(((reg>>22) & 0x3)<<2);
-+ if (chip_mode == 1) {
-+ printk("! nand 2048\n");
-+ ra_or(NFC_CONF1, 1);
-+ is_nand_page_2048 = 1;
-+ nand_addrlen = 5;
-+ }
-+ else {
-+ printk("! nand 512\n");
-+ ra_and(NFC_CONF1, ~1);
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = 4;
-+ }
-+#elif (defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855))
-+ ra_outl(RALINK_SYSCTL_BASE+0x60, ra_inl(RALINK_SYSCTL_BASE+0x60) & ~(0x3<<18));
-+ reg = ra_inl(RALINK_SYSCTL_BASE+0x10);
-+ chip_mode = (reg & 0x0F);
-+ if((chip_mode==1)||(chip_mode==11)) {
-+ ra_or(NFC_CONF1, 1);
-+ is_nand_page_2048 = 1;
-+ nand_addrlen = ((chip_mode!=11) ? 4 : 5);
-+ printk("!!! nand page size = 2048, addr len=%d\n", nand_addrlen);
-+ }
-+ else {
-+ ra_and(NFC_CONF1, ~1);
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = ((chip_mode!=10) ? 3 : 4);
-+ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+ }
-+#else
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = 3;
-+ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+#endif
-+
-+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855)
-+ //config ECC location
-+ ra_and(NFC_CONF1, 0xfff000ff);
-+ ra_or(NFC_CONF1, ((CONFIG_ECC_OFFSET + 2) << 16) +
-+ ((CONFIG_ECC_OFFSET + 1) << 12) +
-+ (CONFIG_ECC_OFFSET << 8));
-+#endif
-+
-+#define ALIGNE_16(a) (((unsigned long)(a)+15) & ~15)
-+ buffers_size = ALIGNE_16((1<<CONFIG_PAGE_SIZE_BIT) + (1<<CONFIG_OOBSIZE_PER_PAGE_BIT)); //ra->buffers
-+ bbt_size = BBTTAG_BITS * (1<<(CONFIG_CHIP_SIZE_BIT - (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))) / 8; //ra->bbt
-+ bbt_size = ALIGNE_16(bbt_size);
-+
-+ alloc_size = buffers_size + bbt_size;
-+ alloc_size += buffers_size; //for ra->readback_buffers
-+ alloc_size += sizeof(*ra);
-+ alloc_size += sizeof(*ranfc_mtd);
-+
-+ //make sure gpio-0 is input
-+ ra_outl(RALINK_PIO_BASE+0x24, ra_inl(RALINK_PIO_BASE+0x24) & ~0x01);
-+
-+ ra = (struct ra_nand_chip *)kzalloc(alloc_size, GFP_KERNEL | GFP_DMA);
-+ if (!ra) {
-+ printk("%s: mem alloc fail \n", __func__);
-+ return -ENOMEM;
-+ }
-+ memset(ra, 0, alloc_size);
-+
-+ //dynamic
-+ ra->buffers = (char *)((char *)ra + sizeof(*ra));
-+ ra->readback_buffers = ra->buffers + buffers_size;
-+ ra->bbt = ra->readback_buffers + buffers_size;
-+ ranfc_mtd = (struct mtd_info *)(ra->bbt + bbt_size);
-+
-+ //static
-+ ra->numchips = CONFIG_NUMCHIPS;
-+ ra->chip_shift = CONFIG_CHIP_SIZE_BIT;
-+ ra->page_shift = CONFIG_PAGE_SIZE_BIT;
-+ ra->oob_shift = CONFIG_OOBSIZE_PER_PAGE_BIT;
-+ ra->erase_shift = (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT);
-+ ra->badblockpos = CONFIG_BAD_BLOCK_POS;
-+ ra_oob_layout.eccpos[0] = CONFIG_ECC_OFFSET;
-+ ra_oob_layout.eccpos[1] = CONFIG_ECC_OFFSET + 1;
-+ ra_oob_layout.eccpos[2] = CONFIG_ECC_OFFSET + 2;
-+ ra->oob = &ra_oob_layout;
-+ ra->buffers_page = -1;
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ if (ranfc_verify) {
-+ ra->sandbox_page = nand_bbt_find_sandbox(ra);
-+ }
-+#endif
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x01); //set wp to high
-+ nfc_all_reset();
-+
-+ ranfc_mtd->type = MTD_NANDFLASH;
-+ ranfc_mtd->flags = MTD_CAP_NANDFLASH;
-+ ranfc_mtd->size = CONFIG_NUMCHIPS * CFG_CHIPSIZE;
-+ ranfc_mtd->erasesize = CFG_BLOCKSIZE;
-+ ranfc_mtd->writesize = CFG_PAGESIZE;
-+ ranfc_mtd->oobsize = CFG_PAGE_OOBSIZE;
-+ ranfc_mtd->oobavail = RA_CHIP_OOB_AVAIL;
-+ ranfc_mtd->name = "ra_nfc";
-+ //ranfc_mtd->index
-+ ranfc_mtd->ecclayout = &ra_oob_layout;
-+ //ranfc_mtd->numberaseregions
-+ //ranfc_mtd->eraseregions
-+ //ranfc_mtd->bansize
-+ ranfc_mtd->_erase = ramtd_nand_erase;
-+ //ranfc_mtd->point
-+ //ranfc_mtd->unpoint
-+ ranfc_mtd->_read = ramtd_nand_read;
-+ ranfc_mtd->_write = ramtd_nand_write;
-+ ranfc_mtd->_read_oob = ramtd_nand_readoob;
-+ ranfc_mtd->_write_oob = ramtd_nand_writeoob;
-+ //ranfc_mtd->get_fact_prot_info; ranfc_mtd->read_fact_prot_reg;
-+ //ranfc_mtd->get_user_prot_info; ranfc_mtd->read_user_prot_reg;
-+ //ranfc_mtd->write_user_prot_reg; ranfc_mtd->lock_user_prot_reg;
-+ //ranfc_mtd->writev; ranfc_mtd->sync; ranfc_mtd->lock; ranfc_mtd->unlock; ranfc_mtd->suspend; ranfc_mtd->resume;
-+ ranfc_mtd->_block_isbad = ramtd_nand_block_isbad;
-+ ranfc_mtd->_block_markbad = ramtd_nand_block_markbad;
-+ //ranfc_mtd->reboot_notifier
-+ //ranfc_mtd->ecc_stats;
-+ // subpage_sht;
-+
-+ //ranfc_mtd->get_device; ranfc_mtd->put_device
-+ ranfc_mtd->priv = ra;
-+
-+ ranfc_mtd->owner = THIS_MODULE;
-+ ra->controller = &ra->hwcontrol;
-+ mutex_init(ra->controller);
-+
-+ printk("%s: alloc %x, at %p , btt(%p, %x), ranfc_mtd:%p\n",
-+ __func__ , alloc_size, ra, ra->bbt, bbt_size, ranfc_mtd);
-+
-+ ppdata.of_node = pdev->dev.of_node;
-+ err = mtd_device_parse_register(ranfc_mtd, mtk_probe_types,
-+ &ppdata, NULL, 0);
-+
-+ return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+ struct ra_nand_chip *ra;
-+
-+ if (ranfc_mtd) {
-+ ra = (struct ra_nand_chip *)ranfc_mtd->priv;
-+
-+ /* Deregister partitions */
-+ //del_mtd_partitions(ranfc_mtd);
-+ kfree(ra);
-+ }
-+ return 0;
-+}
-+
-+static const struct of_device_id mtk_nand_match[] = {
-+ { .compatible = "mtk,mt7620-nand" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mtk_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+ .probe = mtk_nand_probe,
-+ .remove = mtk_nand_remove,
-+ .driver = {
-+ .name = "mt7620_nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mtk_nand_match,
-+ },
-+};
-+
-+module_platform_driver(mtk_nand_driver);
-+
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.h
-@@ -0,0 +1,232 @@
-+#ifndef RT2880_NAND_H
-+#define RT2880_NAND_H
-+
-+#include <linux/mtd/mtd.h>
-+
-+//#include "gdma.h"
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define CONFIG_RALINK_MT7620
-+
-+#define SKIP_BAD_BLOCK
-+//#define RANDOM_GEN_BAD_BLOCK
-+
-+#define ra_inl(addr) (*(volatile unsigned int *)(addr))
-+#define ra_outl(addr, value) (*(volatile unsigned int *)(addr) = (value))
-+#define ra_aor(addr, a_mask, o_value) ra_outl(addr, (ra_inl(addr) & (a_mask)) | (o_value))
-+#define ra_and(addr, a_mask) ra_aor(addr, a_mask, 0)
-+#define ra_or(addr, o_value) ra_aor(addr, -1, o_value)
-+
-+
-+#define CONFIG_NUMCHIPS 1
-+#define CONFIG_NOT_SUPPORT_WP //rt3052 has no WP signal for chip.
-+//#define CONFIG_NOT_SUPPORT_RB
-+
-+extern int is_nand_page_2048;
-+extern const unsigned int nand_size_map[2][3];
-+
-+//chip
-+// chip geometry: SAMSUNG small size 32MB.
-+#define CONFIG_CHIP_SIZE_BIT (nand_size_map[is_nand_page_2048][nand_addrlen-3]) //! (1<<NAND_SIZE_BYTE) MB
-+//#define CONFIG_CHIP_SIZE_BIT (is_nand_page_2048? 29 : 25) //! (1<<NAND_SIZE_BYTE) MB
-+#define CONFIG_PAGE_SIZE_BIT (is_nand_page_2048? 11 : 9) //! (1<<PAGE_SIZE) MB
-+//#define CONFIG_SUBPAGE_BIT 1 //! these bits will be compensate by command cycle
-+#define CONFIG_NUMPAGE_PER_BLOCK_BIT (is_nand_page_2048? 6 : 5) //! order of number of pages a block.
-+#define CONFIG_OOBSIZE_PER_PAGE_BIT (is_nand_page_2048? 6 : 4) //! byte number of oob a page.
-+#define CONFIG_BAD_BLOCK_POS (is_nand_page_2048? 0 : 4) //! offset of byte to denote bad block.
-+#define CONFIG_ECC_BYTES 3 //! ecc has 3 bytes
-+#define CONFIG_ECC_OFFSET (is_nand_page_2048? 6 : 5) //! ecc starts from offset 5.
-+
-+//this section should not be modified.
-+//#define CFG_COLUMN_ADDR_MASK ((1 << (CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT)) - 1)
-+//#define CFG_COLUMN_ADDR_CYCLE (((CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT) + 7)/8)
-+//#define CFG_ROW_ADDR_CYCLE ((CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT + 7)/8)
-+//#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_COLUMN_ADDR_CYCLE (is_nand_page_2048? 2 : 1)
-+#define CFG_ROW_ADDR_CYCLE (nand_addrlen - CFG_COLUMN_ADDR_CYCLE)
-+#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_CHIPSIZE (1 << ((CONFIG_CHIP_SIZE_BIT>=32)? 31 : CONFIG_CHIP_SIZE_BIT))
-+//#define CFG_CHIPSIZE (1 << CONFIG_CHIP_SIZE_BIT)
-+#define CFG_PAGESIZE (1 << CONFIG_PAGE_SIZE_BIT)
-+#define CFG_BLOCKSIZE (CFG_PAGESIZE << CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_NUMPAGE (1 << (CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT))
-+#define CFG_NUMBLOCK (CFG_NUMPAGE >> CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_BLOCK_OOBSIZE (1 << (CONFIG_OOBSIZE_PER_PAGE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))
-+#define CFG_PAGE_OOBSIZE (1 << CONFIG_OOBSIZE_PER_PAGE_BIT)
-+
-+#define NAND_BLOCK_ALIGN(addr) ((addr) & (CFG_BLOCKSIZE-1))
-+#define NAND_PAGE_ALIGN(addr) ((addr) & (CFG_PAGESIZE-1))
-+
-+
-+#define NFC_BASE RALINK_NAND_CTRL_BASE
-+#define NFC_CTRL (NFC_BASE + 0x0)
-+#define NFC_CONF (NFC_BASE + 0x4)
-+#define NFC_CMD1 (NFC_BASE + 0x8)
-+#define NFC_CMD2 (NFC_BASE + 0xc)
-+#define NFC_CMD3 (NFC_BASE + 0x10)
-+#define NFC_ADDR (NFC_BASE + 0x14)
-+#define NFC_DATA (NFC_BASE + 0x18)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_ECC (NFC_BASE + 0x30)
-+#else
-+#define NFC_ECC (NFC_BASE + 0x1c)
-+#endif
-+#define NFC_STATUS (NFC_BASE + 0x20)
-+#define NFC_INT_EN (NFC_BASE + 0x24)
-+#define NFC_INT_ST (NFC_BASE + 0x28)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_CONF1 (NFC_BASE + 0x2c)
-+#define NFC_ECC_P1 (NFC_BASE + 0x30)
-+#define NFC_ECC_P2 (NFC_BASE + 0x34)
-+#define NFC_ECC_P3 (NFC_BASE + 0x38)
-+#define NFC_ECC_P4 (NFC_BASE + 0x3c)
-+#define NFC_ECC_ERR1 (NFC_BASE + 0x40)
-+#define NFC_ECC_ERR2 (NFC_BASE + 0x44)
-+#define NFC_ECC_ERR3 (NFC_BASE + 0x48)
-+#define NFC_ECC_ERR4 (NFC_BASE + 0x4c)
-+#define NFC_ADDR2 (NFC_BASE + 0x50)
-+#endif
-+
-+enum _int_stat {
-+ INT_ST_ND_DONE = 1<<0,
-+ INT_ST_TX_BUF_RDY = 1<<1,
-+ INT_ST_RX_BUF_RDY = 1<<2,
-+ INT_ST_ECC_ERR = 1<<3,
-+ INT_ST_TX_TRAS_ERR = 1<<4,
-+ INT_ST_RX_TRAS_ERR = 1<<5,
-+ INT_ST_TX_KICK_ERR = 1<<6,
-+ INT_ST_RX_KICK_ERR = 1<<7
-+};
-+
-+
-+//#define WORKAROUND_RX_BUF_OV 1
-+
-+
-+/*************************************************************
-+ * stolen from nand.h
-+ *************************************************************/
-+
-+/*
-+ * Standard NAND flash commands
-+ */
-+#define NAND_CMD_READ0 0
-+#define NAND_CMD_READ1 1
-+#define NAND_CMD_RNDOUT 5
-+#define NAND_CMD_PAGEPROG 0x10
-+#define NAND_CMD_READOOB 0x50
-+#define NAND_CMD_ERASE1 0x60
-+#define NAND_CMD_STATUS 0x70
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_SEQIN 0x80
-+#define NAND_CMD_RNDIN 0x85
-+#define NAND_CMD_READID 0x90
-+#define NAND_CMD_ERASE2 0xd0
-+#define NAND_CMD_RESET 0xff
-+
-+/* Extended commands for large page devices */
-+#define NAND_CMD_READSTART 0x30
-+#define NAND_CMD_RNDOUTSTART 0xE0
-+#define NAND_CMD_CACHEDPROG 0x15
-+
-+/* Extended commands for AG-AND device */
-+/*
-+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
-+ * there is no way to distinguish that from NAND_CMD_READ0
-+ * until the remaining sequence of commands has been completed
-+ * so add a high order bit and mask it off in the command.
-+ */
-+#define NAND_CMD_DEPLETE1 0x100
-+#define NAND_CMD_DEPLETE2 0x38
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_STATUS_ERROR 0x72
-+/* multi-bank error status (banks 0-3) */
-+#define NAND_CMD_STATUS_ERROR0 0x73
-+#define NAND_CMD_STATUS_ERROR1 0x74
-+#define NAND_CMD_STATUS_ERROR2 0x75
-+#define NAND_CMD_STATUS_ERROR3 0x76
-+#define NAND_CMD_STATUS_RESET 0x7f
-+#define NAND_CMD_STATUS_CLEAR 0xff
-+
-+#define NAND_CMD_NONE -1
-+
-+/* Status bits */
-+#define NAND_STATUS_FAIL 0x01
-+#define NAND_STATUS_FAIL_N1 0x02
-+#define NAND_STATUS_TRUE_READY 0x20
-+#define NAND_STATUS_READY 0x40
-+#define NAND_STATUS_WP 0x80
-+
-+typedef enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_WRITING,
-+ FL_ERASING,
-+ FL_SYNCING,
-+ FL_CACHEDPRG,
-+ FL_PM_SUSPENDED,
-+} nand_state_t;
-+
-+/*************************************************************/
-+
-+
-+
-+typedef enum _ra_flags {
-+ FLAG_NONE = 0,
-+ FLAG_ECC_EN = (1<<0),
-+ FLAG_USE_GDMA = (1<<1),
-+ FLAG_VERIFY = (1<<2),
-+} RA_FLAGS;
-+
-+
-+#define BBTTAG_BITS 2
-+#define BBTTAG_BITS_MASK ((1<<BBTTAG_BITS) -1)
-+enum BBT_TAG {
-+ BBT_TAG_UNKNOWN = 0, //2'b01
-+ BBT_TAG_GOOD = 3, //2'b11
-+ BBT_TAG_BAD = 2, //2'b10
-+ BBT_TAG_RES = 1, //2'b01
-+};
-+
-+struct ra_nand_chip {
-+ int numchips;
-+ int chip_shift;
-+ int page_shift;
-+ int erase_shift;
-+ int oob_shift;
-+ int badblockpos;
-+#if !defined (__UBOOT__)
-+ struct mutex hwcontrol;
-+ struct mutex *controller;
-+#endif
-+ struct nand_ecclayout *oob;
-+ int state;
-+ unsigned int buffers_page;
-+ char *buffers; //[CFG_PAGESIZE + CFG_PAGE_OOBSIZE];
-+ char *readback_buffers;
-+ unsigned char *bbt;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ unsigned int sandbox_page; // steal a page (block) for read ECC verification
-+#endif
-+
-+};
-+
-+
-+
-+//fixme, gdma api
-+int nand_dma_sync(void);
-+void release_dma_buf(void);
-+int set_gdma_ch(unsigned long dst,
-+ unsigned long src, unsigned int len, int burst_size,
-+ int soft_mode, int src_req_type, int dst_req_type,
-+ int src_burst_mode, int dst_burst_mode);
-+
-+
-+
-+
-+#endif
diff --git a/target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch
deleted file mode 100644
index 74453e1..0000000
--- a/target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From f85e6dacdb7d7a9bc37f33cf8770006ab64286f7 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 27 Nov 2013 20:58:16 +0100
-Subject: [PATCH 131/133] mtd: add chunked read io to m25p80
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/devices/m25p80.c | 127 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 127 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -392,6 +392,58 @@ static int m25p80_read(struct mtd_info *
- return 0;
- }
-
-+static int m25p80_read_chunked(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ struct spi_transfer t[2];
-+ struct spi_message m;
-+ uint8_t opcode;
-+ int idx = 0;
-+
-+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-+ __func__, (u32)from, len);
-+
-+ spi_message_init(&m);
-+ memset(t, 0, (sizeof t));
-+
-+ t[0].tx_buf = flash->command;
-+ t[0].len = m25p_cmdsz(flash);
-+ spi_message_add_tail(&t[0], &m);
-+ spi_message_add_tail(&t[1], &m);
-+
-+ *retlen = 0;
-+
-+ while (idx < len) {
-+ int rlen = (len - idx > 4) ? (4) : (len - idx);
-+
-+ t[1].rx_buf = &buf[idx];
-+ t[1].len = rlen;
-+
-+ mutex_lock(&flash->lock);
-+
-+ /* Wait till previous write/erase is done. */
-+ if (wait_till_ready(flash)) {
-+ /* REVISIT status return?? */
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ /* Set up the write data buffer. */
-+ opcode = OPCODE_NORM_READ;
-+ flash->command[0] = opcode;
-+ m25p_addr2cmd(flash, from + idx, flash->command);
-+
-+ spi_sync(flash->spi, &m);
-+
-+ *retlen += m.actual_length - m25p_cmdsz(flash);
-+
-+ mutex_unlock(&flash->lock);
-+ idx += rlen;
-+ }
-+ return 0;
-+}
-+
- /*
- * Write an address range to the flash chip. Data must be written in
- * FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -479,6 +531,76 @@ static int m25p80_write(struct mtd_info
- return 0;
- }
-
-+static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ struct spi_transfer t;
-+ struct spi_message m;
-+ u32 i, page_size;
-+ u8 tmp[8];
-+
-+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-+ __func__, (u32)to, len);
-+
-+ spi_message_init(&m);
-+ memset(&t, 0, (sizeof t));
-+
-+ t.tx_buf = tmp;
-+ t.len = 8;
-+ spi_message_add_tail(&t, &m);
-+
-+ mutex_lock(&flash->lock);
-+
-+ /* Wait until finished previous write command. */
-+ if (wait_till_ready(flash)) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ write_enable(flash);
-+
-+ /* Set up the opcode in the write buffer. */
-+ flash->command[0] = OPCODE_PP;
-+ m25p_addr2cmd(flash, to, flash->command);
-+
-+ t.len = 4 + (to & 0x3);
-+ if (t.len == 4)
-+ t.len = 8;
-+ memcpy(tmp, flash->command, 4);
-+ memcpy(&tmp[4], buf, t.len - 4);
-+ spi_sync(flash->spi, &m);
-+ page_size = t.len - 4;
-+
-+ *retlen = m.actual_length - m25p_cmdsz(flash);
-+
-+ /* write everything in flash->page_size chunks */
-+ for (i = page_size; i < len; i += page_size) {
-+ page_size = len - i;
-+ if (page_size > 4)
-+ page_size = 4;
-+
-+ /* write the next page to flash */
-+ m25p_addr2cmd(flash, to + i, flash->command);
-+
-+ memcpy(tmp, flash->command, 4);
-+ memcpy(&tmp[4], buf + i, page_size);
-+ t.len = 4 + page_size;
-+
-+ wait_till_ready(flash);
-+
-+ write_enable(flash);
-+
-+ spi_sync(flash->spi, &m);
-+
-+ *retlen += m.actual_length - m25p_cmdsz(flash);
-+ }
-+
-+ mutex_unlock(&flash->lock);
-+
-+ return 0;
-+}
-+
- static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1059,6 +1181,12 @@ static int m25p_probe(struct spi_device
- flash->fast_read = true;
- #endif
-
-+ if (np && of_property_read_bool(np, "m25p,chunked-io")) {
-+ dev_warn(&spi->dev, "using chunked io\n");
-+ flash->mtd._read = m25p80_read_chunked;
-+ flash->mtd._write = m25p80_write_chunked;
-+ }
-+
- #ifdef CONFIG_M25PXX_USE_FAST_READ
- flash->fast_read = true;
- #endif
diff --git a/target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch b/target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch
deleted file mode 100644
index c6ad7f4..0000000
--- a/target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch
+++ /dev/null
@@ -1,325 +0,0 @@
-From def7e226d3e5c501180bdc2fc644ff924b5a275e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 23 Jun 2013 00:16:22 +0200
-Subject: [PATCH 132/133] GPIO: add gpio_export_with_name
-
-http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/133856.html
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- Documentation/devicetree/bindings/gpio/gpio.txt | 60 ++++++++++++++++++++
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 24 +++++---
- include/asm-generic/gpio.h | 6 +-
- include/linux/gpio.h | 26 ++++++++-
- 5 files changed, 172 insertions(+), 12 deletions(-)
-
---- a/Documentation/devicetree/bindings/gpio/gpio.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
-@@ -112,3 +112,63 @@ where,
-
- The pinctrl node must have "#gpio-range-cells" property to show number of
- arguments to pass with phandle from gpio controllers node.
-+
-+3) gpio-export
-+--------------
-+
-+gpio-export will allow you to automatically export gpio
-+
-+required properties:
-+- compatible: Should be "gpio-export"
-+
-+in each child node will reprensent a gpio or if no name is specified
-+a list of gpio to export
-+
-+required properties:
-+- gpios: gpio to export
-+
-+optional properties:
-+ - gpio-export,name: export name
-+ - gpio-export,output: to set the as output with default value
-+ if no present gpio as input
-+ - pio-export,direction_may_change: boolean to allow the direction to be controllable
-+
-+Example:
-+
-+
-+gpio_export {
-+ compatible = "gpio-export";
-+ #size-cells = <0>;
-+
-+ in {
-+ gpio-export,name = "in";
-+ gpios = <&pioC 20 0>;
-+ };
-+
-+ out {
-+ gpio-export,name = "out";
-+ gpio-export,output = <1>;
-+ gpio-export,direction_may_change;
-+ gpios = <&pioC 21 0>;
-+ };
-+
-+ in_out {
-+ gpio-export,name = "in_out";
-+ gpio-export,direction_may_change;
-+ gpios = <&pioC 21 0>;
-+ };
-+
-+ gpios_in {
-+ gpios = <&pioB 0 0
-+ &pioB 3 0
-+ &pioC 4 0>;
-+ gpio-export,direction_may_change;
-+ };
-+
-+ gpios_out {
-+ gpios = <&pioB 1 0
-+ &pioB 2 0
-+ &pioC 3 0>;
-+ gpio-export,output = <1>;
-+ };
-+};
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -21,6 +21,8 @@
- #include <linux/of_gpio.h>
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- /* Private data structure for of_gpiochip_find_and_xlate */
- struct gg_data {
-@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip
- if (chip->of_node)
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/drivers/gpio/gpiolib.c
-+++ b/drivers/gpio/gpiolib.c
-@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct
- static void gpiod_set_value(struct gpio_desc *desc, int value);
- static int gpiod_cansleep(const struct gpio_desc *desc);
- static int gpiod_to_irq(const struct gpio_desc *desc);
--static int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
-+static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- static int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
- static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-@@ -674,7 +674,7 @@ static ssize_t export_store(struct class
- status = -ENODEV;
- goto done;
- }
-- status = gpiod_export(desc, true);
-+ status = gpiod_export(desc, true, NULL);
- if (status < 0)
- gpiod_free(desc);
- else
-@@ -736,9 +736,10 @@ static struct class gpio_class = {
-
-
- /**
-- * gpio_export - export a GPIO through sysfs
-+ * gpio_export_with_name - export a GPIO through sysfs
- * @gpio: gpio to make available, already requested
- * @direction_may_change: true if userspace may change gpio direction
-+ * @name: gpio name
- * Context: arch_initcall or later
- *
- * When drivers want to make a GPIO accessible to userspace after they
-@@ -750,7 +751,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+static int gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- unsigned long flags;
- int status;
-@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc
- goto fail_unlock;
- }
-
-+ if (name)
-+ ioname = name;
- if (!desc->chip->direction_input || !desc->chip->direction_output)
- direction_may_change = false;
- spin_unlock_irqrestore(&gpio_lock, flags);
-@@ -829,11 +832,11 @@ fail_unlock:
- return status;
- }
-
--int gpio_export(unsigned gpio, bool direction_may_change)
-+int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
- {
-- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
-+ return gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
- }
--EXPORT_SYMBOL_GPL(gpio_export);
-+EXPORT_SYMBOL_GPL(gpio_export_with_name);
-
- static int match_export(struct device *dev, const void *data)
- {
-@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(str
- }
-
- static inline int gpiod_export(struct gpio_desc *desc,
-- bool direction_may_change)
-+ bool direction_may_change, const char *name)
- {
- return -ENOSYS;
- }
-@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsi
- if (flags & GPIOF_OPEN_SOURCE)
- set_bit(FLAG_OPEN_SOURCE, &desc->flags);
-
-+ if (flags & GPIOF_ACTIVE_LOW)
-+ set_bit(FLAG_ACTIVE_LOW, &gpio_desc[gpio].flags);
-+
- if (flags & GPIOF_DIR_IN)
- err = gpiod_direction_input(desc);
- else
-@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsi
- goto free_gpio;
-
- if (flags & GPIOF_EXPORT) {
-- err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE);
-+ err = gpiod_export(desc, flags & GPIOF_EXPORT_CHANGEABLE, NULL);
- if (err)
- goto free_gpio;
- }
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct
- * A sysfs interface can be exported by individual drivers if they want,
- * but more typically is configured entirely from userspace.
- */
--extern int gpio_export(unsigned gpio, bool direction_may_change);
-+extern int gpio_export_with_name(unsigned gpio, bool direction_may_change,
-+ const char *name);
- extern int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio);
- extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
-@@ -284,7 +285,8 @@ struct device;
-
- /* sysfs support is only available with gpiolib, where it's optional */
-
--static inline int gpio_export(unsigned gpio, bool direction_may_change)
-+static inline int gpio_export_with_name(unsigned gpio,
-+ bool direction_may_change, const char *name)
- {
- return -ENOSYS;
- }
---- a/include/linux/gpio.h
-+++ b/include/linux/gpio.h
-@@ -27,6 +27,9 @@
- #define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
- #define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
-
-+#define GPIOF_ACTIVE_LOW (1 << 6)
-+
-+
- /**
- * struct gpio - a structure describing a GPIO with configuration
- * @gpio: the GPIO number
-@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansle
- WARN_ON(1);
- }
-
--static inline int gpio_export(unsigned gpio, bool direction_may_change)
-+static inline int gpio_export_with_name(unsigned gpio,
-+ bool direction_may_change, const char *name)
- {
- /* GPIO can never have been requested or set as {in,out}put */
- WARN_ON(1);
-@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device
- unsigned long flags, const char *label);
- void devm_gpio_free(struct device *dev, unsigned int gpio);
-
-+/**
-+ * gpio_export - export a GPIO through sysfs
-+ * @gpio: gpio to make available, already requested
-+ * @direction_may_change: true if userspace may change gpio direction
-+ * Context: arch_initcall or later
-+ *
-+ * When drivers want to make a GPIO accessible to userspace after they
-+ * have requested it -- perhaps while debugging, or as part of their
-+ * public interface -- they may use this routine. If the GPIO can
-+ * change direction (some can't) and the caller allows it, userspace
-+ * will see "direction" sysfs attribute which may be used to change
-+ * the gpio's direction. A "value" attribute will always be provided.
-+ *
-+ * Returns zero on success, else an error.
-+ */
-+static inline int gpio_export(unsigned gpio,bool direction_may_change)
-+{
-+ return gpio_export_with_name(gpio, direction_may_change, NULL);
-+}
-+
- #endif /* __LINUX_GPIO_H */
diff --git a/target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch
deleted file mode 100644
index 099671a..0000000
--- a/target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch
+++ /dev/null
@@ -1,246 +0,0 @@
-From 935815cd3b9690b86e70a18fb755f70becb57cc6 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 133/133] uvc: add iPassion iP2970 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/media/usb/uvc/uvc_driver.c | 14 ++++
- drivers/media/usb/uvc/uvc_status.c | 2 +
- drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h | 3 +
- 4 files changed, 166 insertions(+)
-
---- a/drivers/media/usb/uvc/uvc_driver.c
-+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2420,6 +2420,20 @@ static struct usb_device_id uvc_ids[] =
- .bInterfaceProtocol = 0,
- .driver_info = UVC_QUIRK_PROBE_MINMAX
- | UVC_QUIRK_IGNORE_SELECTOR_UNIT },
-+
-+/* iPassion iP2970 */
-+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
-+ | USB_DEVICE_ID_MATCH_INT_INFO,
-+ .idVendor = 0x1B3B,
-+ .idProduct = 0x2970,
-+ .bInterfaceClass = USB_CLASS_VIDEO,
-+ .bInterfaceSubClass = 1,
-+ .bInterfaceProtocol = 0,
-+ .driver_info = UVC_QUIRK_PROBE_MINMAX
-+ | UVC_QUIRK_STREAM_NO_FID
-+ | UVC_QUIRK_MOTION
-+ | UVC_QUIRK_SINGLE_ISO },
-+
- /* Generic USB Video Class */
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
- {}
---- a/drivers/media/usb/uvc/uvc_status.c
-+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
- switch (dev->status[0] & 0x0f) {
- case UVC_STATUS_TYPE_CONTROL:
- uvc_event_control(dev, dev->status, len);
-+ dev->motion = 1;
- break;
-
- case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
- }
-
- pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
-+ dev->motion = 0;
-
- /* For high-speed interrupt endpoints, the bInterval value is used as
- * an exponent of two. Some developers forgot about it.
---- a/drivers/media/usb/uvc/uvc_video.c
-+++ b/drivers/media/usb/uvc/uvc_video.c
-@@ -21,6 +21,11 @@
- #include <linux/wait.h>
- #include <linux/atomic.h>
- #include <asm/unaligned.h>
-+#include <linux/skbuff.h>
-+#include <linux/kobject.h>
-+#include <linux/netlink.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-
- #include <media/v4l2-common.h>
-
-@@ -1074,9 +1079,149 @@ static void uvc_video_decode_data(struct
- }
- }
-
-+struct bh_priv {
-+ unsigned long seen;
-+};
-+
-+struct bh_event {
-+ const char *name;
-+ struct sk_buff *skb;
-+ struct work_struct work;
-+};
-+
-+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
-+#define BH_DBG(fmt, args...) do {} while (0)
-+#define BH_SKB_SIZE 2048
-+
-+extern u64 uevent_next_seqnum(void);
-+static int seen = 0;
-+
-+static int bh_event_add_var(struct bh_event *event, int argv,
-+ const char *format, ...)
-+{
-+ static char buf[128];
-+ char *s;
-+ va_list args;
-+ int len;
-+
-+ if (argv)
-+ return 0;
-+
-+ va_start(args, format);
-+ len = vsnprintf(buf, sizeof(buf), format, args);
-+ va_end(args);
-+
-+ if (len >= sizeof(buf)) {
-+ BH_ERR("buffer size too small\n");
-+ WARN_ON(1);
-+ return -ENOMEM;
-+ }
-+
-+ s = skb_put(event->skb, len + 1);
-+ strcpy(s, buf);
-+
-+ BH_DBG("added variable '%s'\n", s);
-+
-+ return 0;
-+}
-+
-+static int motion_hotplug_fill_event(struct bh_event *event)
-+{
-+ int s = jiffies;
-+ int ret;
-+
-+ if (!seen)
-+ seen = jiffies;
-+
-+ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "PATH=%s",
-+ "/sbin:/bin:/usr/sbin:/usr/bin");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "ACTION=motion");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
-+ if (ret)
-+ return ret;
-+ seen = s;
-+
-+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
-+
-+ return ret;
-+}
-+
-+static void motion_hotplug_work(struct work_struct *work)
-+{
-+ struct bh_event *event = container_of(work, struct bh_event, work);
-+ int ret = 0;
-+
-+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
-+ if (!event->skb)
-+ goto out_free_event;
-+
-+ ret = bh_event_add_var(event, 0, "%s@", "add");
-+ if (ret)
-+ goto out_free_skb;
-+
-+ ret = motion_hotplug_fill_event(event);
-+ if (ret)
-+ goto out_free_skb;
-+
-+ NETLINK_CB(event->skb).dst_group = 1;
-+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-+
-+out_free_skb:
-+ if (ret) {
-+ BH_ERR("work error %d\n", ret);
-+ kfree_skb(event->skb);
-+ }
-+out_free_event:
-+ kfree(event);
-+}
-+
-+static int motion_hotplug_create_event(void)
-+{
-+ struct bh_event *event;
-+
-+ event = kzalloc(sizeof(*event), GFP_KERNEL);
-+ if (!event)
-+ return -ENOMEM;
-+
-+ event->name = "motion";
-+
-+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
-+ schedule_work(&event->work);
-+
-+ return 0;
-+}
-+
-+#define MOTION_FLAG_OFFSET 4
- static void uvc_video_decode_end(struct uvc_streaming *stream,
- struct uvc_buffer *buf, const __u8 *data, int len)
- {
-+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
-+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
-+ u8 *mem;
-+ buf->state = UVC_BUF_STATE_READY;
-+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
-+ if ( stream->dev->motion ) {
-+ stream->dev->motion = 0;
-+ motion_hotplug_create_event();
-+ } else {
-+ *mem &= 0x7f;
-+ }
-+ }
-+
- /* Mark the buffer as done if the EOF marker is set. */
- if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1477,6 +1622,8 @@ static int uvc_init_video_isoc(struct uv
- if (npackets == 0)
- return -ENOMEM;
-
-+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
-+ npackets = 1;
- size = npackets * psize;
-
- for (i = 0; i < UVC_URBS; ++i) {
---- a/drivers/media/usb/uvc/uvcvideo.h
-+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -137,6 +137,8 @@
- #define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
- #define UVC_QUIRK_PROBE_DEF 0x00000100
- #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
-+#define UVC_QUIRK_MOTION 0x00000400
-+#define UVC_QUIRK_SINGLE_ISO 0x00000800
-
- /* Format flags */
- #define UVC_FMT_FLAG_COMPRESSED 0x00000001
-@@ -538,6 +540,7 @@ struct uvc_device {
- __u8 *status;
- struct input_dev *input;
- char input_phys[64];
-+ int motion;
- };
-
- enum uvc_handle_state {
diff --git a/target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch
deleted file mode 100644
index 9c5a728..0000000
--- a/target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -805,10 +805,6 @@ static void split_uimage(struct mtd_info
- return;
-
- len = be32_to_cpu(hdr.size) + 0x40;
-- len = mtd_pad_erasesize(master, part->offset, len);
-- if (len + master->erasesize > part->mtd.size)
-- return;
--
- __mtd_add_partition(master, "rootfs", part->offset + len,
- part->mtd.size - len, false);
- }
diff --git a/target/linux/ramips/patches-3.10/0135-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.10/0135-mtd-add-rtn56u-support.patch
deleted file mode 100644
index f48c7cb..0000000
--- a/target/linux/ramips/patches-3.10/0135-mtd-add-rtn56u-support.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -793,8 +793,11 @@ static void split_uimage(struct mtd_info
- {
- struct {
- __be32 magic;
-- __be32 pad[2];
-+ __be32 pad0[2];
- __be32 size;
-+ __be32 pad1[4];
-+ __be32 name[7];
-+ __be32 kern_size;
- } hdr;
- size_t len;
-
-@@ -804,7 +807,11 @@ static void split_uimage(struct mtd_info
- if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
- return;
-
-- len = be32_to_cpu(hdr.size) + 0x40;
-+ if (hdr.kern_size != 0 && hdr.name[0] == 0)
-+ len = be32_to_cpu(hdr.kern_size);
-+ else
-+ len = be32_to_cpu(hdr.size) + 0x40;
-+
- __mtd_add_partition(master, "rootfs", part->offset + len,
- part->mtd.size - len, false);
- }
diff --git a/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch b/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch
deleted file mode 100644
index e358e62..0000000
--- a/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From f281fdccbb3e762d293e6eef7f291a33b84e0f6a Mon Sep 17 00:00:00 2001
-From: Ralf Baechle <ralf@linux-mips.org>
-Date: Thu, 20 Jun 2013 14:56:17 +0200
-Subject: [PATCH 200/215] MIPS: Fix TLBR-use hazards for R2 cores in the TLB
- reload handlers
-
-MIPS R2 documents state that an execution hazard barrier is needed
-after a TLBR before reading EntryLo.
-
-Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.
-
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-Patchwork: https://patchwork.linux-mips.org/patch/5526/
-(cherry picked from commit 73acc7df534ff458a81435178dab3ea037ed6d78)
----
- arch/mips/mm/tlbex.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -1935,6 +1935,19 @@ static void __cpuinit build_r4000_tlb_lo
- uasm_i_nop(&p);
-
- uasm_i_tlbr(&p);
-+
-+ switch (current_cpu_type()) {
-+ default:
-+ if (cpu_has_mips_r2) {
-+ uasm_i_ehb(&p);
-+
-+ case CPU_CAVIUM_OCTEON:
-+ case CPU_CAVIUM_OCTEON_PLUS:
-+ case CPU_CAVIUM_OCTEON2:
-+ break;
-+ }
-+ }
-+
- /* Examine entrylo 0 or 1 based on ptr. */
- if (use_bbit_insns()) {
- uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8);
-@@ -1989,6 +2002,19 @@ static void __cpuinit build_r4000_tlb_lo
- uasm_i_nop(&p);
-
- uasm_i_tlbr(&p);
-+
-+ switch (current_cpu_type()) {
-+ default:
-+ if (cpu_has_mips_r2) {
-+ uasm_i_ehb(&p);
-+
-+ case CPU_CAVIUM_OCTEON:
-+ case CPU_CAVIUM_OCTEON_PLUS:
-+ case CPU_CAVIUM_OCTEON2:
-+ break;
-+ }
-+ }
-+
- /* Examine entrylo 0 or 1 based on ptr. */
- if (use_bbit_insns()) {
- uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8);
diff --git a/target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch b/target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch
deleted file mode 100644
index f1898ba..0000000
--- a/target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From cde59bef2f155fc38413e470ff0e4672623cdbec Mon Sep 17 00:00:00 2001
-From: Tony Wu <tung7970@gmail.com>
-Date: Fri, 21 Jun 2013 10:13:08 +0000
-Subject: [PATCH 201/215] MIPS: GIC: Fix gic_set_affinity infinite loop
-
-There is an infinite loop in gic_set_affinity. When irq_set_affinity
-gets called on gic controller, it blocks forever.
-
-Signed-off-by: Tony Wu <tung7970@gmail.com>
-Cc: Steven J. Hill <Steven.Hill@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5537/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-(cherry picked from commit c214c03512b67e56dea3f4471705f8caae49553a)
----
- arch/mips/kernel/irq-gic.c | 15 +++++++--------
- 1 file changed, 7 insertions(+), 8 deletions(-)
-
---- a/arch/mips/kernel/irq-gic.c
-+++ b/arch/mips/kernel/irq-gic.c
-@@ -219,16 +219,15 @@ static int gic_set_affinity(struct irq_d
-
- /* Assumption : cpumask refers to a single CPU */
- spin_lock_irqsave(&gic_lock, flags);
-- for (;;) {
-- /* Re-route this IRQ */
-- GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
-
-- /* Update the pcpu_masks */
-- for (i = 0; i < NR_CPUS; i++)
-- clear_bit(irq, pcpu_masks[i].pcpu_mask);
-- set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
-+ /* Re-route this IRQ */
-+ GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
-+
-+ /* Update the pcpu_masks */
-+ for (i = 0; i < NR_CPUS; i++)
-+ clear_bit(irq, pcpu_masks[i].pcpu_mask);
-+ set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
-
-- }
- cpumask_copy(d->affinity, cpumask);
- spin_unlock_irqrestore(&gic_lock, flags);
-
diff --git a/target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch b/target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch
deleted file mode 100644
index e3a2cab..0000000
--- a/target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 46b62174f655edf6a4befae7f9871c431146b1b6 Mon Sep 17 00:00:00 2001
-From: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-Date: Wed, 11 Sep 2013 14:17:47 -0500
-Subject: [PATCH 202/215] MIPS: Fix SMP core calculations when using MT
- support.
-
-The TCBIND register is only available if the core has MT support. It
-should not be read otherwise. Secondly, the number of TCs (siblings)
-are calculated differently depending on if the kernel is configured
-as SMVP or SMTC.
-
-Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5822/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-(cherry picked from commit 670bac3a8c201fc1f5f92ac6b4a8b42dc8172937)
----
- arch/mips/kernel/smp-cmp.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/arch/mips/kernel/smp-cmp.c
-+++ b/arch/mips/kernel/smp-cmp.c
-@@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
-
- c->core = (read_c0_ebase() >> 1) & 0x1ff;
- #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-- c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
-+ if (cpu_has_mipsmt)
-+ c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
-+ TCBIND_CURVPE;
- #endif
- #ifdef CONFIG_MIPS_MT_SMTC
- c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
-@@ -177,9 +179,16 @@ void __init cmp_smp_setup(void)
- }
-
- if (cpu_has_mipsmt) {
-- unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
-+ unsigned int nvpe = 1;
-+#ifdef CONFIG_MIPS_MT_SMP
-+ unsigned int mvpconf0 = read_c0_mvpconf0();
-+
-+ nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-+#elif defined(CONFIG_MIPS_MT_SMTC)
-+ unsigned int mvpconf0 = read_c0_mvpconf0();
-
- nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
-+#endif
- smp_num_siblings = nvpe;
- }
- pr_info("Detected %i available secondary CPU(s)\n", ncpu);
diff --git a/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch b/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch
deleted file mode 100644
index fc853fa..0000000
--- a/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 871d1be8c3ce46b8ef395b56cd0e37cede10e76a Mon Sep 17 00:00:00 2001
-From: Ralf Baechle <ralf@linux-mips.org>
-Date: Tue, 17 Sep 2013 12:44:31 +0200
-Subject: [PATCH 203/215] MIPS: Fix accessing to per-cpu data when flushing
- the cache
-
-This fixes the following issue
-
-BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
-caller is blast_dcache32+0x30/0x254
-Call Trace:
-[<8047f02c>] dump_stack+0x8/0x34
-[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
-[<80114d94>] blast_dcache32+0x30/0x254
-[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
-[<80110ff0>] mips_dma_map_sg+0x108/0x180
-[<80355098>] ide_dma_prepare+0xf0/0x1b8
-[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
-[<8035951c>] ide_do_rw_disk+0x298/0x3e4
-[<8034a3c4>] do_ide_request+0x2e0/0x704
-[<802bb0dc>] __blk_run_queue+0x44/0x64
-[<802be000>] queue_unplugged.isra.36+0x1c/0x54
-[<802beb94>] blk_flush_plug_list+0x18c/0x24c
-[<802bec6c>] blk_finish_plug+0x18/0x48
-[<8026554c>] journal_commit_transaction+0x3b8/0x151c
-[<80269648>] kjournald+0xec/0x238
-[<8014ac00>] kthread+0xb8/0xc0
-[<8010268c>] ret_from_kernel_thread+0x14/0x1c
-
-Caches in most systems are identical - but not always, so we can't avoid
-the use of smp_call_function() by just looking at the boot CPU's data,
-have to fiddle with preemption instead.
-
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5835
-(cherry picked from commit ff522058bd717506b2fa066fa564657f2b86477e)
----
- arch/mips/mm/c-r4k.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -12,6 +12,7 @@
- #include <linux/highmem.h>
- #include <linux/kernel.h>
- #include <linux/linkage.h>
-+#include <linux/preempt.h>
- #include <linux/sched.h>
- #include <linux/smp.h>
- #include <linux/mm.h>
-@@ -601,6 +602,7 @@ static void r4k_dma_cache_wback_inv(unsi
- /* Catch bad driver code */
- BUG_ON(size == 0);
-
-+ preempt_disable();
- if (cpu_has_inclusive_pcaches) {
- if (size >= scache_size)
- r4k_blast_scache();
-@@ -621,6 +623,7 @@ static void r4k_dma_cache_wback_inv(unsi
- R4600_HIT_CACHEOP_WAR_IMPL;
- blast_dcache_range(addr, addr + size);
- }
-+ preempt_enable();
-
- bc_wback_inv(addr, size);
- __sync();
-@@ -631,6 +634,7 @@ static void r4k_dma_cache_inv(unsigned l
- /* Catch bad driver code */
- BUG_ON(size == 0);
-
-+ preempt_disable();
- if (cpu_has_inclusive_pcaches) {
- if (size >= scache_size)
- r4k_blast_scache();
-@@ -655,6 +659,7 @@ static void r4k_dma_cache_inv(unsigned l
- R4600_HIT_CACHEOP_WAR_IMPL;
- blast_inv_dcache_range(addr, addr + size);
- }
-+ preempt_enable();
-
- bc_inv(addr, size);
- __sync();
diff --git a/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch b/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch
deleted file mode 100644
index 0a80ea5..0000000
--- a/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 3da3528448850ccde412d52fb939575641ada80d Mon Sep 17 00:00:00 2001
-From: "Maciej W. Rozycki" <macro@linux-mips.org>
-Date: Wed, 18 Sep 2013 19:08:15 +0100
-Subject: [PATCH 204/215] MIPS: 74K/1074K: Correct erratum workaround.
-
-Make sure 74K revision numbers are not applied to the 1074K. Also catch
-invalid usage.
-
-Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
-Cc: Steven J. Hill <Steven.Hill@imgtec.com>
-Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Patchwork: https://patchwork.linux-mips.org/patch/5857/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-(cherry picked from commit 9213ad77070ea75fc3a5e43e3d9e9c4146e4930a)
----
- arch/mips/mm/c-r4k.c | 26 ++++++++++++++++++--------
- 1 file changed, 18 insertions(+), 8 deletions(-)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -785,20 +785,30 @@ static inline void rm7k_erratum31(void)
-
- static inline void alias_74k_erratum(struct cpuinfo_mips *c)
- {
-+ unsigned int imp = c->processor_id & 0xff00;
-+ unsigned int rev = c->processor_id & PRID_REV_MASK;
-+
- /*
- * Early versions of the 74K do not update the cache tags on a
- * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
- * aliases. In this case it is better to treat the cache as always
- * having aliases.
- */
-- if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
-- c->dcache.flags |= MIPS_CACHE_VTAG;
-- if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
-- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-- if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
-- ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
-- c->dcache.flags |= MIPS_CACHE_VTAG;
-- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-+ switch (imp) {
-+ case PRID_IMP_74K:
-+ if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
-+ c->dcache.flags |= MIPS_CACHE_VTAG;
-+ if (rev == PRID_REV_ENCODE_332(2, 4, 0))
-+ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-+ break;
-+ case PRID_IMP_1074K:
-+ if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
-+ c->dcache.flags |= MIPS_CACHE_VTAG;
-+ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-+ }
-+ break;
-+ default:
-+ BUG();
- }
- }
-
diff --git a/target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch b/target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch
deleted file mode 100644
index 01ac875..0000000
--- a/target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 5a43b20db2fd18f8ea5f3a919d4bc9d9c2038c6c Mon Sep 17 00:00:00 2001
-From: "Steven J. Hill" <Steven.Hill@imgtec.com>
-Date: Wed, 25 Sep 2013 14:58:19 -0500
-Subject: [PATCH 205/215] MIPS: GIC: Send IPIs using the GIC.
-
-If a GIC present, then use it to send IPIs between the cores.
-
-Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
----
- arch/mips/kernel/smp-mt.c | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/arch/mips/kernel/smp-mt.c
-+++ b/arch/mips/kernel/smp-mt.c
-@@ -71,6 +71,7 @@ static unsigned int __init smvp_vpe_init
-
- /* Record this as available CPU */
- set_cpu_possible(tc, true);
-+ set_cpu_present(tc, true);
- __cpu_number_map[tc] = ++ncpu;
- __cpu_logical_map[ncpu] = tc;
- }
-@@ -112,12 +113,35 @@ static void __init smvp_tc_init(unsigned
- write_tc_c0_tchalt(TCHALT_H);
- }
-
-+static void mp_send_ipi_single(int cpu, unsigned int action)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ switch (action) {
-+ case SMP_CALL_FUNCTION:
-+ gic_send_ipi(plat_ipi_call_int_xlate(cpu));
-+ break;
-+
-+ case SMP_RESCHEDULE_YOURSELF:
-+ gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
-+ break;
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
- static void vsmp_send_ipi_single(int cpu, unsigned int action)
- {
- int i;
- unsigned long flags;
- int vpflags;
-
-+ if (gic_present) {
-+ mp_send_ipi_single(cpu, action);
-+ return;
-+ }
- local_irq_save(flags);
-
- vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */
-@@ -164,6 +188,8 @@ static void __cpuinit vsmp_init_secondar
-
- static void __cpuinit vsmp_smp_finish(void)
- {
-+ pr_debug("SMPMT: CPU%d: vsmp_smp_finish\n", smp_processor_id());
-+
- /* CDFIXME: remove this? */
- write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
-
-@@ -178,6 +204,7 @@ static void __cpuinit vsmp_smp_finish(vo
-
- static void vsmp_cpus_done(void)
- {
-+ pr_debug("SMPMT: CPU%d: vsmp_cpus_done\n", smp_processor_id());
- }
-
- /*
-@@ -191,6 +218,8 @@ static void vsmp_cpus_done(void)
- static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
- {
- struct thread_info *gp = task_thread_info(idle);
-+ pr_debug("SMPMT: CPU%d: vsmp_boot_secondary cpu %d\n",
-+ smp_processor_id(), cpu);
- dvpe();
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
-@@ -232,6 +261,7 @@ static void __init vsmp_smp_setup(void)
- unsigned int mvpconf0, ntc, tc, ncpu = 0;
- unsigned int nvpe;
-
-+ pr_debug("SMPMT: CPU%d: vsmp_smp_setup\n", smp_processor_id());
- #ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
-@@ -272,6 +302,8 @@ static void __init vsmp_smp_setup(void)
-
- static void __init vsmp_prepare_cpus(unsigned int max_cpus)
- {
-+ pr_debug("SMPMT: CPU%d: vsmp_prepare_cpus %d\n",
-+ smp_processor_id(), max_cpus);
- mips_mt_set_cpuoptions();
- }
-
diff --git a/target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch
deleted file mode 100644
index 74fdf1d..0000000
--- a/target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch
+++ /dev/null
@@ -1,723 +0,0 @@
-From 259ce690b20562aa5dfef711e72ed02a4f514ce4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:19:37 +0000
-Subject: [PATCH 206/215] MIPS: ralink: add MT7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/gic.h | 2 +
- arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++
- arch/mips/kernel/vmlinux.lds.S | 1 +
- arch/mips/ralink/Kconfig | 18 ++
- arch/mips/ralink/Makefile | 7 +-
- arch/mips/ralink/Platform | 7 +
- arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++
- arch/mips/ralink/malta-amon.c | 81 +++++++++
- arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++
- 9 files changed, 608 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h
- create mode 100644 arch/mips/ralink/irq-gic.c
- create mode 100644 arch/mips/ralink/malta-amon.c
- create mode 100644 arch/mips/ralink/mt7621.c
-
---- a/arch/mips/include/asm/gic.h
-+++ b/arch/mips/include/asm/gic.h
-@@ -19,7 +19,11 @@
- #define GIC_TRIG_EDGE 1
- #define GIC_TRIG_LEVEL 0
-
-+#define GIC_NUM_INTRS 64
-+
-+#ifndef GIC_NUM_INTRS
- #define GIC_NUM_INTRS (24 + NR_CPUS * 2)
-+#endif
-
- #define MSK(n) ((1 << (n)) - 1)
- #define REG32(addr) (*(volatile unsigned int *) (addr))
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -0,0 +1,39 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _MT7621_REGS_H_
-+#define _MT7621_REGS_H_
-+
-+#define MT7621_SYSC_BASE 0x1E000000
-+
-+#define SYSC_REG_CHIP_NAME0 0x00
-+#define SYSC_REG_CHIP_NAME1 0x04
-+#define SYSC_REG_CHIP_REV 0x0c
-+#define SYSC_REG_SYSTEM_CONFIG0 0x10
-+#define SYSC_REG_SYSTEM_CONFIG1 0x14
-+
-+#define CHIP_REV_PKG_MASK 0x1
-+#define CHIP_REV_PKG_SHIFT 16
-+#define CHIP_REV_VER_MASK 0xf
-+#define CHIP_REV_VER_SHIFT 8
-+#define CHIP_REV_ECO_MASK 0xf
-+
-+#define MT7621_DRAM_BASE 0x0
-+#define MT7621_DDR2_SIZE_MIN 32
-+#define MT7621_DDR2_SIZE_MAX 256
-+
-+#define MT7621_CHIP_NAME0 0x3637544D
-+#define MT7621_CHIP_NAME1 0x20203132
-+
-+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-+
-+#endif
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -51,6 +51,7 @@ SECTIONS
- /* read-only */
- _text = .; /* Text and read-only data */
- .text : {
-+ /*. = . + 0x8000; */
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -7,6 +7,11 @@ config CLKEVT_RT3352
- select CLKSRC_OF
- select CLKSRC_MMIO
-
-+config IRQ_INTC
-+ bool
-+ default y
-+ depends on !SOC_MT7621
-+
- choice
- prompt "Ralink SoC selection"
- default SOC_RT305X
-@@ -35,6 +40,15 @@ choice
- select USB_ARCH_HAS_EHCI
- select HW_HAS_PCI
-
-+ config SOC_MT7621
-+ bool "MT7621"
-+ select MIPS_CPU_SCACHE
-+ select SYS_SUPPORTS_MULTITHREADING
-+ select SYS_SUPPORTS_SMP
-+ select SYS_SUPPORTS_MIPS_CMP
-+ select IRQ_GIC
-+ select HW_HAS_PCI
-+
- endchoice
-
- choice
-@@ -62,6 +76,10 @@ choice
- bool "MT7620A eval kit"
- depends on SOC_MT7620
-
-+ config DTB_MT7621_EVAL
-+ bool "MT7621 eval kit"
-+ depends on SOC_MT7621
-+
- endchoice
-
- endif
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -6,16 +6,21 @@
- # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-
--obj-y := prom.o of.o reset.o clk.o irq.o timer.o
-+obj-y := prom.o of.o reset.o clk.o timer.o
-
- obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-
- obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
-
-+obj-$(CONFIG_IRQ_INTC) += irq.o
-+obj-$(CONFIG_IRQ_GIC) += irq-gic.o
-+obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o
-+
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
- obj-$(CONFIG_SOC_RT3883) += rt3883.o
- obj-$(CONFIG_SOC_MT7620) += mt7620.o
-+obj-$(CONFIG_SOC_MT7621) += mt7621.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- a/arch/mips/ralink/Platform
-+++ b/arch/mips/ralink/Platform
-@@ -26,3 +26,10 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
- # Ralink MT7620
- #
- load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
-+cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
-+
-+#
-+# Ralink MT7621
-+#
-+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
-+cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
---- /dev/null
-+++ b/arch/mips/ralink/irq-gic.c
-@@ -0,0 +1,271 @@
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/hardirq.h>
-+#include <linux/preempt.h>
-+#include <linux/irqdomain.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mipsregs.h>
-+
-+#include <asm/irq.h>
-+#include <asm/setup.h>
-+
-+#include <asm/gic.h>
-+#include <asm/gcmpregs.h>
-+
-+#include <asm/mach-ralink/mt7621.h>
-+
-+unsigned long _gcmp_base;
-+static int gic_resched_int_base = 56;
-+static int gic_call_int_base = 60;
-+static struct irq_chip *irq_gic;
-+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS];
-+
-+#if defined(CONFIG_MIPS_MT_SMP)
-+static int gic_resched_int_base;
-+static int gic_call_int_base;
-+
-+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
-+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
-+
-+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-+{
-+ scheduler_ipi();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t
-+ipi_call_interrupt(int irq, void *dev_id)
-+{
-+ smp_call_function_interrupt();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction irq_resched = {
-+ .handler = ipi_resched_interrupt,
-+ .flags = IRQF_DISABLED|IRQF_PERCPU,
-+ .name = "ipi resched"
-+};
-+
-+static struct irqaction irq_call = {
-+ .handler = ipi_call_interrupt,
-+ .flags = IRQF_DISABLED|IRQF_PERCPU,
-+ .name = "ipi call"
-+};
-+
-+#endif
-+
-+static void __init
-+gic_fill_map(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-+ gic_intr_map[i].cpunum = 0;
-+ gic_intr_map[i].pin = GIC_CPU_INT0;
-+ gic_intr_map[i].polarity = GIC_POL_POS;
-+ gic_intr_map[i].trigtype = GIC_TRIG_LEVEL;
-+ gic_intr_map[i].flags = GIC_FLAG_IPI;
-+ }
-+
-+#if defined(CONFIG_MIPS_MT_SMP)
-+ {
-+ int cpu;
-+
-+ gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids;
-+ gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
-+
-+ i = gic_resched_int_base;
-+
-+ for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
-+ gic_intr_map[i + cpu].cpunum = cpu;
-+ gic_intr_map[i + cpu].pin = GIC_CPU_INT1;
-+ gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE;
-+
-+ gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu;
-+ gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2;
-+ gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE;
-+ }
-+ }
-+#endif
-+}
-+
-+void
-+gic_irq_ack(struct irq_data *d)
-+{
-+ int irq = (d->irq - gic_irq_base);
-+
-+ GIC_CLR_INTR_MASK(irq);
-+
-+ if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
-+ GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
-+}
-+
-+void
-+gic_finish_irq(struct irq_data *d)
-+{
-+ GIC_SET_INTR_MASK(d->irq - gic_irq_base);
-+}
-+
-+void __init
-+gic_platform_init(int irqs, struct irq_chip *irq_controller)
-+{
-+ irq_gic = irq_controller;
-+}
-+
-+static void
-+gic_irqdispatch(void)
-+{
-+ unsigned int irq = gic_get_int();
-+
-+ if (likely(irq < GIC_NUM_INTRS))
-+ do_IRQ(MIPS_GIC_IRQ_BASE + irq);
-+ else {
-+ pr_err("Spurious GIC Interrupt!\n");
-+ spurious_interrupt();
-+ }
-+
-+}
-+
-+static void
-+vi_timer_irqdispatch(void)
-+{
-+ do_IRQ(cp0_compare_irq);
-+}
-+
-+#if defined(CONFIG_MIPS_MT_SMP)
-+unsigned int
-+plat_ipi_call_int_xlate(unsigned int cpu)
-+{
-+ return GIC_CALL_INT(cpu);
-+}
-+
-+unsigned int
-+plat_ipi_resched_int_xlate(unsigned int cpu)
-+{
-+ return GIC_RESCHED_INT(cpu);
-+}
-+#endif
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-+
-+ if (unlikely(!pending)) {
-+ pr_err("Spurious CP0 Interrupt!\n");
-+ spurious_interrupt();
-+ } else {
-+ if (pending & CAUSEF_IP7)
-+ do_IRQ(cp0_compare_irq);
-+
-+ if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2))
-+ gic_irqdispatch();
-+ }
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+static int
-+gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, irq_gic,
-+#if defined(CONFIG_MIPS_MT_SMP)
-+ (hw >= gic_resched_int_base) ?
-+ handle_percpu_irq :
-+#endif
-+ handle_level_irq);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = gic_map,
-+};
-+
-+static int __init
-+of_gic_init(struct device_node *node,
-+ struct device_node *parent)
-+{
-+ struct irq_domain *domain;
-+ struct resource gcmp = { 0 }, gic = { 0 };
-+ unsigned int gic_rev;
-+ int i;
-+
-+ if (of_address_to_resource(node, 0, &gic))
-+ panic("Failed to get gic memory range");
-+ if (request_mem_region(gic.start, resource_size(&gic),
-+ gic.name) < 0)
-+ panic("Failed to request gic memory");
-+ if (of_address_to_resource(node, 2, &gcmp))
-+ panic("Failed to get gic memory range");
-+ if (request_mem_region(gcmp.start, resource_size(&gcmp),
-+ gcmp.name) < 0)
-+ panic("Failed to request gcmp memory");
-+
-+ _gcmp_base = (unsigned long) ioremap_nocache(gcmp.start, resource_size(&gcmp));
-+ if (!_gcmp_base)
-+ panic("Failed to remap gcmp memory\n");
-+
-+ if ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) != gcmp.start)
-+ panic("Failed to find gcmp core\n");
-+
-+ /* tell the gcmp where to find the gic */
-+ GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK;
-+ gic_present = 1;
-+ if (cpu_has_vint) {
-+ set_vi_handler(2, gic_irqdispatch);
-+ set_vi_handler(3, gic_irqdispatch);
-+ set_vi_handler(4, gic_irqdispatch);
-+ set_vi_handler(7, vi_timer_irqdispatch);
-+ }
-+
-+ gic_fill_map();
-+
-+ gic_init(gic.start, resource_size(&gic), gic_intr_map,
-+ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
-+
-+ GICREAD(GIC_REG(SHARED, GIC_SH_REVISIONID), gic_rev);
-+ pr_info("gic: revision %d.%d\n", (gic_rev >> 8) & 0xff, gic_rev & 0xff);
-+
-+ domain = irq_domain_add_legacy(node, GIC_NUM_INTRS, MIPS_GIC_IRQ_BASE,
-+ 0, &irq_domain_ops, NULL);
-+ if (!domain)
-+ panic("Failed to add irqdomain");
-+
-+#if defined(CONFIG_MIPS_MT_SMP)
-+ for (i = 0; i < nr_cpu_ids; i++) {
-+ setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched);
-+ setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call);
-+ }
-+#endif
-+
-+ change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 |
-+ STATUSF_IP2);
-+ return 0;
-+}
-+
-+static struct of_device_id __initdata of_irq_ids[] = {
-+ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
-+ { .compatible = "ralink,mt7621-gic", .data = of_gic_init },
-+ {},
-+};
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ of_irq_init(of_irq_ids);
-+}
---- /dev/null
-+++ b/arch/mips/ralink/malta-amon.c
-@@ -0,0 +1,81 @@
-+/*
-+ * Copyright (C) 2007 MIPS Technologies, Inc.
-+ * All rights reserved.
-+
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Arbitrary Monitor interface
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/smp.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/mips-boards/launch.h>
-+#include <asm/mipsmtregs.h>
-+
-+int amon_cpu_avail(int cpu)
-+{
-+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-+
-+ if (cpu < 0 || cpu >= NCPULAUNCH) {
-+ pr_debug("avail: cpu%d is out of range\n", cpu);
-+ return 0;
-+ }
-+
-+ launch += cpu;
-+ if (!(launch->flags & LAUNCH_FREADY)) {
-+ pr_debug("avail: cpu%d is not ready\n", cpu);
-+ return 0;
-+ }
-+ if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
-+ pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+void amon_cpu_start(int cpu,
-+ unsigned long pc, unsigned long sp,
-+ unsigned long gp, unsigned long a0)
-+{
-+ volatile struct cpulaunch *launch =
-+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-+
-+ if (!amon_cpu_avail(cpu))
-+ return;
-+ if (cpu == smp_processor_id()) {
-+ pr_debug("launch: I am cpu%d!\n", cpu);
-+ return;
-+ }
-+ launch += cpu;
-+
-+ pr_debug("launch: starting cpu%d\n", cpu);
-+
-+ launch->pc = pc;
-+ launch->gp = gp;
-+ launch->sp = sp;
-+ launch->a0 = a0;
-+
-+ smp_wmb(); /* Target must see parameters before go */
-+ launch->flags |= LAUNCH_FGO;
-+ smp_wmb(); /* Target must see go before we poll */
-+
-+ while ((launch->flags & LAUNCH_FGONE) == 0)
-+ ;
-+ smp_rmb(); /* Target will be updating flags soon */
-+ pr_debug("launch: cpu%d gone!\n", cpu);
-+}
---- /dev/null
-+++ b/arch/mips/ralink/mt7621.c
-@@ -0,0 +1,183 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <asm/gcmpregs.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/smp-ops.h>
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/mt7621.h>
-+
-+#include <pinmux.h>
-+
-+#include "common.h"
-+
-+#define SYSC_REG_SYSCFG 0x10
-+#define SYSC_REG_CPLL_CLKCFG0 0x2c
-+#define SYSC_REG_CUR_CLK_STS 0x44
-+#define CPU_CLK_SEL (BIT(30) | BIT(31))
-+
-+#define MT7621_GPIO_MODE_UART1 1
-+#define MT7621_GPIO_MODE_I2C 2
-+#define MT7621_GPIO_MODE_UART2 3
-+#define MT7621_GPIO_MODE_UART3 5
-+#define MT7621_GPIO_MODE_JTAG 7
-+#define MT7621_GPIO_MODE_WDT_MASK 0x3
-+#define MT7621_GPIO_MODE_WDT_SHIFT 8
-+#define MT7621_GPIO_MODE_WDT_GPIO 1
-+#define MT7621_GPIO_MODE_PCIE_RST 0
-+#define MT7621_GPIO_MODE_PCIE_REF 2
-+#define MT7621_GPIO_MODE_PCIE_MASK 0x3
-+#define MT7621_GPIO_MODE_PCIE_SHIFT 10
-+#define MT7621_GPIO_MODE_PCIE_GPIO 1
-+#define MT7621_GPIO_MODE_MDIO 12
-+#define MT7621_GPIO_MODE_RGMII1 14
-+#define MT7621_GPIO_MODE_RGMII2 15
-+#define MT7621_GPIO_MODE_SPI_MASK 0x3
-+#define MT7621_GPIO_MODE_SPI_SHIFT 16
-+#define MT7621_GPIO_MODE_SPI_GPIO 1
-+#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
-+#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
-+#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-+
-+static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-+static struct rt2880_pmx_func uart3_grp[] = { FUNC("uart3", 0, 5, 4) };
-+static struct rt2880_pmx_func uart2_grp[] = { FUNC("uart2", 0, 9, 4) };
-+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-+static struct rt2880_pmx_func wdt_grp[] = {
-+ FUNC("wdt rst", 0, 18, 1),
-+ FUNC("wdt refclk", 2, 18, 1),
-+};
-+static struct rt2880_pmx_func pcie_rst_grp[] = {
-+ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
-+ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
-+};
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-+static struct rt2880_pmx_func spi_grp[] = {
-+ FUNC("spi", 0, 34, 7),
-+ FUNC("nand", 2, 34, 8),
-+};
-+static struct rt2880_pmx_func sdhci_grp[] = {
-+ FUNC("sdhci", 0, 41, 8),
-+ FUNC("nand", 2, 41, 8),
-+};
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
-+
-+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
-+ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
-+ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
-+ GRP("uart3", uart2_grp, 1, MT7621_GPIO_MODE_UART2),
-+ GRP("uart2", uart3_grp, 1, MT7621_GPIO_MODE_UART3),
-+ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
-+ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
-+ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
-+ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
-+ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
-+ GRP("mdio", mdio_grp, 1, MT7621_GPIO_MODE_MDIO),
-+ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
-+ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
-+ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
-+ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
-+ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
-+ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
-+ { 0 }
-+};
-+
-+void __init ralink_clk_init(void)
-+{
-+ int cpu_fdiv = 0;
-+ int cpu_ffrac = 0;
-+ int fbdiv = 0;
-+ u32 clk_sts, syscfg;
-+ u8 clk_sel = 0, xtal_mode;
-+ u32 cpu_clk;
-+
-+ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
-+ clk_sel = 1;
-+
-+ switch (clk_sel) {
-+ case 0:
-+ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-+ cpu_fdiv = ((clk_sts >> 8) & 0x1F);
-+ cpu_ffrac = (clk_sts & 0x1F);
-+ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
-+ break;
-+
-+ case 1:
-+ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
-+ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
-+ xtal_mode = (syscfg >> 6) & 0x7;
-+ if(xtal_mode >= 6) { //25Mhz Xtal
-+ cpu_clk = 25 * fbdiv * 1000 * 1000;
-+ } else if(xtal_mode >=3) { //40Mhz Xtal
-+ cpu_clk = 40 * fbdiv * 1000 * 1000;
-+ } else { // 20Mhz Xtal
-+ cpu_clk = 20 * fbdiv * 1000 * 1000;
-+ }
-+ break;
-+ }
-+ cpu_clk = 880000000;
-+ ralink_clk_add("cpu", cpu_clk);
-+ ralink_clk_add("1e000b00.spi", 50000000);
-+ ralink_clk_add("1e000c00.uartlite", 50000000);
-+ ralink_clk_add("1e000d00.uart", 50000000);
-+}
-+
-+void __init ralink_of_remap(void)
-+{
-+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
-+ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
-+
-+ if (!rt_sysc_membase || !rt_memc_membase)
-+ panic("Failed to remap core resources");
-+}
-+
-+void prom_soc_init(struct ralink_soc_info *soc_info)
-+{
-+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
-+ unsigned char *name = NULL;
-+ u32 n0;
-+ u32 n1;
-+ u32 rev;
-+
-+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-+
-+ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
-+ name = "MT7621";
-+ soc_info->compatible = "mtk,mt7621-soc";
-+ } else {
-+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-+ }
-+
-+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-+
-+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-+ "Mediatek %s ver:%u eco:%u",
-+ name,
-+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-+ (rev & CHIP_REV_ECO_MASK));
-+
-+ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
-+ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
-+ soc_info->mem_base = MT7621_DRAM_BASE;
-+
-+ rt2880_pinmux_data = mt7621_pinmux_data;
-+
-+ if (register_cmp_smp_ops())
-+ panic("failed to register_vsmp_smp_ops()");
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/irq.h
-@@ -0,0 +1,9 @@
-+#ifndef __ASM_MACH_RALINK_IRQ_H
-+#define __ASM_MACH_RALINK_IRQ_H
-+
-+#define GIC_NUM_INTRS 64
-+#define NR_IRQS 256
-+
-+#include_next <irq.h>
-+
-+#endif
diff --git a/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch
deleted file mode 100644
index 1dc9726..0000000
--- a/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 29b1c70ab171609fee58ef6642086d571c0ba0c2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 27 Jan 2014 13:12:41 +0000
-Subject: [PATCH 207/215] MIPS: ralink: add MT7621 defconfig
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 197 insertions(+)
- create mode 100644 arch/mips/configs/mt7621_defconfig
-
---- /dev/null
-+++ b/arch/mips/configs/mt7621_defconfig
-@@ -0,0 +1,197 @@
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SYSVIPC=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_RCU_FANOUT=32
-+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
-+CONFIG_INITRAMFS_ROOT_UID=1000
-+CONFIG_INITRAMFS_ROOT_GID=1000
-+# CONFIG_RD_GZIP is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+# CONFIG_AIO is not set
-+CONFIG_EMBEDDED=y
-+# CONFIG_VM_EVENT_COUNTERS is not set
-+# CONFIG_SLUB_DEBUG is not set
-+# CONFIG_COMPAT_BRK is not set
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_BLK_DEV_BSG is not set
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_SMP=y
-+CONFIG_NR_CPUS=4
-+CONFIG_SCHED_SMT=y
-+# CONFIG_COMPACTION is not set
-+# CONFIG_CROSS_MEMORY_ATTACH is not set
-+# CONFIG_SECCOMP is not set
-+CONFIG_HZ_100=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_NET=y
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+CONFIG_IP_ROUTE_MULTIPATH=y
-+CONFIG_IP_ROUTE_VERBOSE=y
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-+CONFIG_ARPD=y
-+CONFIG_SYN_COOKIES=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+# CONFIG_INET_DIAG is not set
-+CONFIG_TCP_CONG_ADVANCED=y
-+# CONFIG_TCP_CONG_BIC is not set
-+# CONFIG_TCP_CONG_WESTWOOD is not set
-+# CONFIG_TCP_CONG_HTCP is not set
-+CONFIG_IPV6_PRIVACY=y
-+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET6_XFRM_MODE_BEET is not set
-+# CONFIG_IPV6_SIT is not set
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_IPV6_SUBTREES=y
-+CONFIG_IPV6_MROUTE=y
-+CONFIG_NETFILTER=y
-+# CONFIG_BRIDGE_NETFILTER is not set
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NETFILTER_XT_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_LOG=m
-+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-+CONFIG_NETFILTER_XT_MATCH_MAC=m
-+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+CONFIG_NETFILTER_XT_MATCH_TIME=m
-+CONFIG_NF_CONNTRACK_IPV4=m
-+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_NF_NAT_IPV4=m
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_IP_NF_TARGET_REDIRECT=m
-+CONFIG_IP_NF_MANGLE=m
-+CONFIG_IP_NF_RAW=m
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_AH=m
-+CONFIG_IP6_NF_MATCH_EUI64=m
-+CONFIG_IP6_NF_MATCH_FRAG=m
-+CONFIG_IP6_NF_MATCH_OPTS=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_MATCH_MH=m
-+CONFIG_IP6_NF_MATCH_RT=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+CONFIG_IP6_NF_RAW=m
-+CONFIG_BRIDGE=m
-+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-+CONFIG_VLAN_8021Q=y
-+CONFIG_NET_SCHED=y
-+CONFIG_NET_SCH_FQ_CODEL=y
-+CONFIG_HAMRADIO=y
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_FIRMWARE_IN_KERNEL is not set
-+CONFIG_MTD=y
-+CONFIG_MTD_CMDLINE_PARTS=y
-+CONFIG_MTD_BLOCK=y
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_M25P80=y
-+CONFIG_EEPROM_93CX6=m
-+CONFIG_SCSI=y
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_NETDEVICES=y
-+# CONFIG_NET_PACKET_ENGINE is not set
-+# CONFIG_NET_VENDOR_WIZNET is not set
-+CONFIG_PHYLIB=y
-+CONFIG_SWCONFIG=y
-+CONFIG_PPP=m
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPPOE=m
-+CONFIG_PPP_ASYNC=m
-+CONFIG_ISDN=y
-+# CONFIG_INPUT is not set
-+# CONFIG_SERIO is not set
-+# CONFIG_VT is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_DEVKMEM is not set
-+CONFIG_SERIAL_8250=y
-+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-+CONFIG_SERIAL_8250_CONSOLE=y
-+# CONFIG_SERIAL_8250_PCI is not set
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-+CONFIG_SPI=y
-+CONFIG_GPIOLIB=y
-+CONFIG_GPIO_SYSFS=y
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_CORE=y
-+# CONFIG_VGA_ARB is not set
-+CONFIG_USB=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_PLATFORM=y
-+CONFIG_USB_MT7621_XHCI_PLATFORM=y
-+CONFIG_USB_STORAGE=y
-+CONFIG_USB_PHY=y
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_GPIO=m
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_STAGING=y
-+CONFIG_USB_DWC2=m
-+# CONFIG_IOMMU_SUPPORT is not set
-+CONFIG_RESET_CONTROLLER=y
-+# CONFIG_FIRMWARE_MEMMAP is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_PROC_PAGE_MONITOR is not set
-+CONFIG_TMPFS=y
-+CONFIG_TMPFS_XATTR=y
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_SUMMARY=y
-+CONFIG_JFFS2_FS_XATTR=y
-+# CONFIG_JFFS2_FS_POSIX_ACL is not set
-+# CONFIG_JFFS2_FS_SECURITY is not set
-+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-+# CONFIG_JFFS2_ZLIB is not set
-+CONFIG_SQUASHFS=y
-+# CONFIG_SQUASHFS_ZLIB is not set
-+CONFIG_SQUASHFS_XZ=y
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_STRIP_ASM_SYMS=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_SCHED_DEBUG is not set
-+CONFIG_DEBUG_INFO=y
-+CONFIG_DEBUG_INFO_REDUCED=y
-+CONFIG_RCU_CPU_STALL_TIMEOUT=60
-+# CONFIG_FTRACE is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+# CONFIG_VIRTUALIZATION is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32_SARWATE=y
-+# CONFIG_XZ_DEC_X86 is not set
-+CONFIG_AVERAGE=y
diff --git a/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch b/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch
deleted file mode 100644
index 8802528..0000000
--- a/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From dd4f939bb7c30f9256a35d31de673241ead350ab Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 Jan 2014 17:01:22 +0100
-Subject: [PATCH 208/215] MIPS: ralink: add MT7621 dts file
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/dts/Makefile | 1 +
- arch/mips/ralink/dts/mt7621.dtsi | 257 ++++++++++++++++++++++++++++++++++
- arch/mips/ralink/dts/mt7621_eval.dts | 16 +++
- 3 files changed, 274 insertions(+)
- create mode 100644 arch/mips/ralink/dts/mt7621.dtsi
- create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts
-
---- a/arch/mips/ralink/dts/Makefile
-+++ b/arch/mips/ralink/dts/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_
- obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
- obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
- obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
-+obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
---- /dev/null
-+++ b/arch/mips/ralink/dts/mt7621.dtsi
-@@ -0,0 +1,257 @@
-+/ {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "ralink,mtk7620a-soc";
-+
-+ cpus {
-+ cpu@0 {
-+ compatible = "mips,mips24KEc";
-+ };
-+ };
-+
-+ cpuintc: cpuintc@0 {
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ compatible = "mti,cpu-interrupt-controller";
-+ };
-+
-+ palmbus@1E000000 {
-+ compatible = "palmbus";
-+ reg = <0x1E000000 0x100000>;
-+ ranges = <0x0 0x1E000000 0x0FFFFF>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ sysc@0 {
-+ compatible = "mtk,mt7621-sysc";
-+ reg = <0x0 0x100>;
-+ };
-+
-+ wdt@100 {
-+ compatible = "mtk,mt7621-wdt";
-+ reg = <0x100 0x100>;
-+ };
-+
-+ gpio@600 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ compatible = "mtk,mt7621-gpio";
-+ reg = <0x600 0x100>;
-+
-+ gpio0: bank@0 {
-+ reg = <0>;
-+ compatible = "mtk,mt7621-gpio-bank";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ gpio1: bank@1 {
-+ reg = <1>;
-+ compatible = "mtk,mt7621-gpio-bank";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ gpio2: bank@2 {
-+ reg = <2>;
-+ compatible = "mtk,mt7621-gpio-bank";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+
-+ memc@5000 {
-+ compatible = "mtk,mt7621-memc";
-+ reg = <0x300 0x100>;
-+ };
-+
-+ uartlite@c00 {
-+ compatible = "ns16550a";
-+ reg = <0xc00 0x100>;
-+
-+ interrupt-parent = <&gic>;
-+ interrupts = <26>;
-+
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ no-loopback-test;
-+ };
-+
-+ uart@d00 {
-+ compatible = "ns16550a";
-+ reg = <0xd00 0x100>;
-+
-+ interrupt-parent = <&gic>;
-+ interrupts = <27>;
-+
-+ fifo-size = <16>;
-+ reg-shift = <2>;
-+ reg-io-width = <4>;
-+ no-loopback-test;
-+ };
-+
-+ spi@b00 {
-+ status = "okay";
-+
-+ compatible = "ralink,mt7621-spi";
-+ reg = <0xb00 0x100>;
-+
-+ resets = <&rstctrl 18>;
-+ reset-names = "spi";
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+/* pinctrl-names = "default";
-+ pinctrl-0 = <&spi_pins>;*/
-+
-+ m25p80@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "en25q64";
-+ reg = <0 0>;
-+ linux,modalias = "m25p80", "en25q64";
-+ spi-max-frequency = <10000000>;
-+
-+ m25p,chunked-io;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x30000>;
-+ read-only;
-+ };
-+
-+ partition@30000 {
-+ label = "u-boot-env";
-+ reg = <0x30000 0x10000>;
-+ read-only;
-+ };
-+
-+ factory: partition@40000 {
-+ label = "factory";
-+ reg = <0x40000 0x10000>;
-+ read-only;
-+ };
-+
-+ partition@50000 {
-+ label = "firmware";
-+ reg = <0x50000 0x7a0000>;
-+ };
-+
-+ partition@7f0000 {
-+ label = "test";
-+ reg = <0x7f0000 0x10000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ rstctrl: rstctrl {
-+ compatible = "ralink,rt2880-reset";
-+ #reset-cells = <1>;
-+ };
-+
-+ sdhci@1E130000 {
-+ compatible = "ralink,mt7620a-sdhci";
-+ reg = <0x1E130000 4000>;
-+
-+ interrupt-parent = <&gic>;
-+ interrupts = <20>;
-+ };
-+
-+ xhci@1E1C0000 {
-+ compatible = "xhci-platform";
-+ reg = <0x1E1C0000 4000>;
-+
-+ interrupt-parent = <&gic>;
-+ interrupts = <22>;
-+ };
-+
-+ gic: gic@1fbc0000 {
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ compatible = "ralink,mt7621-gic";
-+ reg = < 0x1fbc0000 0x80 /* gic */
-+ 0x1fbf0000 0x8000 /* cpc */
-+ 0x1fbf8000 0x8000 /* gpmc */
-+ >;
-+ };
-+
-+ nand@1e003000 {
-+ compatible = "mtk,mt7621-nand";
-+ bank-width = <2>;
-+ reg = <0x1e003000 0x800
-+ 0x1e003800 0x800>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0x00000 0x80000>; /* 64 KB */
-+ };
-+ partition@80000 {
-+ label = "uboot_env";
-+ reg = <0x80000 0x80000>; /* 64 KB */
-+ };
-+ partition@100000 {
-+ label = "factory";
-+ reg = <0x100000 0x40000>;
-+ };
-+ partition@140000 {
-+ label = "rootfs";
-+ reg = <0x140000 0xec0000>;
-+ };
-+ };
-+
-+ ethernet@1e100000 {
-+ compatible = "ralink,mt7621-eth";
-+ reg = <0x1e100000 10000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ralink,port-map = "llllw";
-+
-+ interrupt-parent = <&gic>;
-+ interrupts = <3>;
-+
-+/* resets = <&rstctrl 21 &rstctrl 23>;
-+ reset-names = "fe", "esw";
-+
-+ port@4 {
-+ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
-+ reg = <4>;
-+
-+ status = "disabled";
-+ };
-+
-+ port@5 {
-+ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
-+ reg = <5>;
-+
-+ status = "disabled";
-+ };
-+*/
-+ mdio-bus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ phy1f: ethernet-phy@1f {
-+ reg = <0x1f>;
-+ phy-mode = "rgmii";
-+
-+/* interrupt-parent = <&gic>;
-+ interrupts = <23>;
-+*/ };
-+ };
-+ };
-+
-+ gsw@1e110000 {
-+ compatible = "ralink,mt7620a-gsw";
-+ reg = <0x1e110000 8000>;
-+ };
-+};
---- /dev/null
-+++ b/arch/mips/ralink/dts/mt7621_eval.dts
-@@ -0,0 +1,16 @@
-+/dts-v1/;
-+
-+/include/ "mt7621.dtsi"
-+
-+/ {
-+ compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
-+ model = "Ralink MT7621 evaluation board";
-+
-+ memory@0 {
-+ reg = <0x0 0x2000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,57600";
-+ };
-+};
diff --git a/target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch b/target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch
deleted file mode 100644
index d518ee6..0000000
--- a/target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From a9d4390c6d27e737887388ccbb48f3767f9f89ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 Jan 2014 17:01:17 +0100
-Subject: [PATCH 209/215] MIPS: ralink: add MT7621 early_printk support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/early_printk.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ralink/early_printk.c
-+++ b/arch/mips/ralink/early_printk.c
-@@ -13,6 +13,8 @@
-
- #ifdef CONFIG_SOC_RT288X
- #define EARLY_UART_BASE 0x300c00
-+#elif defined(CONFIG_SOC_MT7621)
-+#define EARLY_UART_BASE 0x1E000c00
- #else
- #define EARLY_UART_BASE 0x10000c00
- #endif
-@@ -40,9 +42,15 @@ static inline u32 uart_r32(unsigned reg)
-
- void prom_putchar(unsigned char ch)
- {
-+#ifdef CONFIG_SOC_MT7621
-+ uart_w32(ch, UART_TX);
-+ while ((uart_r32(0x14) & UART_LSR_THRE) == 0)
-+ ;
-+#else
- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
- ;
- uart_w32(ch, UART_REG_TX);
- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
- ;
-+#endif
- }
diff --git a/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch
deleted file mode 100644
index 8dae5b3..0000000
--- a/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ /dev/null
@@ -1,822 +0,0 @@
-From 6541090161342ef11cf319a7471aeb6769e20c2c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:22:39 +0000
-Subject: [PATCH 210/215] MIPS: ralink: add MT7621 pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7621.c | 797 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 798 insertions(+)
- create mode 100644 arch/mips/pci/pci-mt7621.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o
-+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
- obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
---- /dev/null
-+++ b/arch/mips/pci/pci-mt7621.c
-@@ -0,0 +1,797 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * PCI init for Ralink RT2880 solution
-+ *
-+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2007 Bruce Chang
-+ * Initial Release
-+ *
-+ * May 2009 Bruce Chang
-+ * support RT2880/RT3883 PCIe
-+ *
-+ * May 2011 Bruce Chang
-+ * support RT6855/MT7620 PCIe
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/version.h>
-+#include <asm/pci.h>
-+#include <asm/io.h>
-+//#include <asm/mach-ralink/eureka_ep430.h>
-+#include <linux/init.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/delay.h>
-+//#include <asm/rt2880/surfboardint.h>
-+
-+#include <ralink_regs.h>
-+
-+extern void pcie_phy_init(void);
-+extern void chk_phy_pll(void);
-+
-+/*
-+ * These functions and structures provide the BIOS scan and mapping of the PCI
-+ * devices.
-+ */
-+
-+#define CONFIG_PCIE_PORT0
-+#define CONFIG_PCIE_PORT1
-+#define CONFIG_PCIE_PORT2
-+#define RALINK_PCIE0_CLK_EN (1<<24)
-+#define RALINK_PCIE1_CLK_EN (1<<25)
-+#define RALINK_PCIE2_CLK_EN (1<<26)
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+#define SURFBOARDINT_PCIE0 12 /* PCIE0 */
-+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
-+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
-+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
-+#define SURFBOARDINT_PCIE1 32 /* PCIE1 */
-+#define SURFBOARDINT_PCIE2 33 /* PCIE2 */
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCIE0_RST (1<<24)
-+#define RALINK_PCIE1_RST (1<<25)
-+#define RALINK_PCIE2_RST (1<<26)
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_BASE 0xBE140000
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+#define RT6855_PCIE2_OFFSET 0x4000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-+
-+
-+#define MV_WRITE(ofs, data) \
-+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-+#define MV_READ(ofs, data) \
-+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+#define MV_READ_DATA(ofs) \
-+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_16(ofs, data) \
-+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-+#define MV_READ_16(ofs, data) \
-+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_8(ofs, data) \
-+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-+#define MV_READ_8(ofs, data) \
-+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-+
-+
-+
-+#define RALINK_PCI_MM_MAP_BASE 0x60000000
-+#define RALINK_PCI_IO_MAP_BASE 0x1e160000
-+
-+#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
-+#define GPIO_PERST
-+#define ASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL |= val; \
-+ else \
-+ RALINK_RSTCTRL &= ~val; \
-+ } while(0)
-+#define DEASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL &= ~val; \
-+ else \
-+ RALINK_RSTCTRL |= val; \
-+ } while(0)
-+#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
-+#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
-+#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
-+#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
-+#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
-+#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
-+#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
-+#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
-+//RALINK_SYSCFG1 bit
-+#define RALINK_PCI_HOST_MODE_EN (1<<7)
-+#define RALINK_PCIE_RC_MODE_EN (1<<8)
-+//RALINK_RSTCTRL bit
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+//RALINK_CLKCFG1 bit
-+#define RALINK_PCI_CLK_EN (1<<19)
-+#define RALINK_PCIE_CLK_EN (1<<21)
-+//RALINK_GPIOMODE bit
-+#define PCI_SLOTx2 (1<<11)
-+#define PCI_SLOTx1 (2<<11)
-+//MTK PCIE PLL bit
-+#define PDRV_SW_SET (1<<31)
-+#define LC_CKDRVPD_ (1<<19)
-+
-+#define MEMORY_BASE 0x0
-+int pcie_link_status = 0;
-+
-+void __inline__ read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val);
-+void __inline__ write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val);
-+
-+#define PCI_ACCESS_READ_1 0
-+#define PCI_ACCESS_READ_2 1
-+#define PCI_ACCESS_READ_4 2
-+#define PCI_ACCESS_WRITE_1 3
-+#define PCI_ACCESS_WRITE_2 4
-+#define PCI_ACCESS_WRITE_4 5
-+
-+static int config_access(unsigned char access_type, struct pci_bus *bus,
-+ unsigned int devfn, unsigned int where, u32 * data)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ uint32_t address_reg, data_reg;
-+ unsigned int address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+
-+ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ MV_WRITE(address_reg, address);
-+
-+ switch(access_type) {
-+ case PCI_ACCESS_WRITE_1:
-+ MV_WRITE_8(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_2:
-+ MV_WRITE_16(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_4:
-+ MV_WRITE(data_reg, *data);
-+ break;
-+ case PCI_ACCESS_READ_1:
-+ MV_READ_8( data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_2:
-+ MV_READ_16(data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_4:
-+ MV_READ(data_reg, data);
-+ break;
-+ default:
-+ printk("no specify access type\n");
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static int
-+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int
-+pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-+{
-+ switch (size) {
-+ case 1:
-+ return read_config_byte(bus, devfn, where, (u8 *) val);
-+ case 2:
-+ return read_config_word(bus, devfn, where, (u16 *) val);
-+ default:
-+ return read_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+static int
-+pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-+{
-+ switch (size) {
-+ case 1:
-+ return write_config_byte(bus, devfn, where, (u8) val);
-+ case 2:
-+ return write_config_word(bus, devfn, where, (u16) val);
-+ default:
-+ return write_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+struct pci_ops rt2880_pci_ops= {
-+ .read = pci_config_read,
-+ .write = pci_config_write,
-+};
-+
-+static struct resource rt2880_res_pci_mem1 = {
-+ .name = "PCI MEM1",
-+ .start = RALINK_PCI_MM_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource rt2880_res_pci_io1 = {
-+ .name = "PCI I/O1",
-+ .start = RALINK_PCI_IO_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller rt2880_controller = {
-+ .pci_ops = &rt2880_pci_ops,
-+ .mem_resource = &rt2880_res_pci_mem1,
-+ .io_resource = &rt2880_res_pci_io1,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+ .io_map_base = 0xa0000000,
-+};
-+
-+void __inline__
-+read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_READ(data_reg, val);
-+ return;
-+}
-+
-+void __inline__
-+write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_WRITE(data_reg, val);
-+ return;
-+}
-+
-+
-+int __init
-+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ u32 val;
-+ int irq = 0;
-+
-+ if ((dev->bus->number == 0) && (slot == 0)) {
-+ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 0 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x1)) {
-+ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 1 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x2)) {
-+ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 2 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 2:
-+ case 6:
-+ irq = RALINK_INT_PCIE1;
-+ break;
-+ case 4:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE0;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else {
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ return 0;
-+ }
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+ return irq;
-+}
-+
-+void
-+set_pcie_phy(u32 *addr, int start_b, int bits, int val)
-+{
-+// printk("0x%p:", addr);
-+// printk(" %x", *addr);
-+ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
-+ *(unsigned int *)(addr) |= val << start_b;
-+// printk(" -> %x\n", *addr);
-+}
-+
-+void
-+bypass_pipe_rst(void)
-+{
-+#if defined (CONFIG_PCIE_PORT0)
-+ /* PCIe Port 0 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ /* PCIe Port 1 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* PCIe Port 2 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+}
-+
-+void
-+set_phy_for_ssc(void)
-+{
-+ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
-+
-+ reg = (reg >> 6) & 0x7;
-+#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
-+ /* Set PCIe Port0 & Port1 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ printk("***** Xtal 40MHz *****\n");
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) {
-+ printk("***** Xtal 25MHz *****\n");
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ } else {
-+ printk("***** Xtal 20MHz *****\n");
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* Set PCIe Port2 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) { // 25MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+#endif
-+}
-+
-+int init_rt2880pci(void)
-+{
-+ unsigned long val = 0;
-+ iomem_resource.start = 0;
-+ iomem_resource.end= ~0;
-+ ioport_resource.start= 0;
-+ ioport_resource.end = ~0;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ DEASSERT_SYSRST_PCIE(val);
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+ bypass_pipe_rst();
-+ set_phy_for_ssc();
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-+ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
-+ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
-+
-+ mdelay(100);
-+#else
-+ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
-+#endif
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ DEASSERT_SYSRST_PCIE(val);
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+#if defined (CONFIG_PCIE_PORT0)
-+ read_config(0, 0, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 0, 0, 0x70c, val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ read_config(0, 1, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 1, 0, 0x70c, val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ read_config(0, 2, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 2, 0, 0x70c, val);
-+#endif
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ read_config(0, 0, 0, 0x70c, &val);
-+ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ read_config(0, 1, 0, 0x70c, &val);
-+ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ read_config(0, 2, 0, 0x70c, &val);
-+ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
-+ RALINK_SYSCFG1 &= ~(0x30);
-+ RALINK_SYSCFG1 |= (2<<4);
-+ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
-+ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
-+ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
-+ RALINK_PCIE_CLK_GEN |= 0x80000000;
-+ mdelay(50);
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-+
-+
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
-+ mdelay(100);
-+#else
-+ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
-+#endif
-+ mdelay(500);
-+
-+
-+ mdelay(500);
-+#if defined (CONFIG_PCIE_PORT0)
-+ if(( RALINK_PCI0_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE0 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
-+ pcie_link_status &= ~(1<<0);
-+ } else {
-+ pcie_link_status |= 1<<0;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ if(( RALINK_PCI1_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE1 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
-+ pcie_link_status &= ~(1<<1);
-+ } else {
-+ pcie_link_status |= 1<<1;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
-+ printk("PCIE2 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
-+ pcie_link_status &= ~(1<<2);
-+ } else {
-+ pcie_link_status |= 1<<2;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
-+ }
-+#endif
-+ if (pcie_link_status == 0)
-+ return 0;
-+
-+/*
-+pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
-+3'b000 x x x
-+3'b001 x x 0
-+3'b010 x 0 x
-+3'b011 x 1 0
-+3'b100 0 x x
-+3'b101 1 x 0
-+3'b110 1 0 x
-+3'b111 2 1 0
-+*/
-+ switch(pcie_link_status) {
-+ case 2:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ break;
-+ case 4:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
-+ break;
-+ case 5:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ case 6:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ }
-+ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-+ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
-+
-+/*
-+ ioport_resource.start = rt2880_res_pci_io1.start;
-+ ioport_resource.end = rt2880_res_pci_io1.end;
-+*/
-+
-+ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
-+ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ //PCIe0
-+ if((pcie_link_status & 0x1) != 0) {
-+ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI0_CLASS = 0x06040001;
-+ printk("PCIE0 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ //PCIe1
-+ if ((pcie_link_status & 0x2) != 0) {
-+ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI1_CLASS = 0x06040001;
-+ printk("PCIE1 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ //PCIe2
-+ if ((pcie_link_status & 0x4) != 0) {
-+ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI2_CLASS = 0x06040001;
-+ printk("PCIE2 enabled\n");
-+ }
-+#endif
-+
-+
-+ switch(pcie_link_status) {
-+ case 7:
-+ read_config(0, 2, 0, 0x4, &val);
-+ write_config(0, 2, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ case 3:
-+ case 5:
-+ case 6:
-+ read_config(0, 1, 0, 0x4, &val);
-+ write_config(0, 1, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ default:
-+ read_config(0, 0, 0, 0x4, &val);
-+ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-+ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
-+ }
-+ register_pci_controller(&rt2880_controller);
-+ return 0;
-+
-+}
-+arch_initcall(init_rt2880pci);
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
diff --git a/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch
deleted file mode 100644
index d010f6f..0000000
--- a/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From 158f2deb6349046ee4406578a5d3146ce9870cb3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:24:42 +0000
-Subject: [PATCH 211/215] watchdog: add MT7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/watchdog/Kconfig | 7 ++
- drivers/watchdog/Makefile | 1 +
- drivers/watchdog/mt7621_wdt.c | 185 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 193 insertions(+)
- create mode 100644 drivers/watchdog/mt7621_wdt.c
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1120,6 +1120,13 @@ config RALINK_WDT
- help
- Hardware driver for the Ralink SoC Watchdog Timer.
-
-+config MT7621_WDT
-+ tristate "Mediatek SoC watchdog"
-+ select WATCHDOG_CORE
-+ depends on SOC_MT7621
-+ help
-+ Hardware driver for the Ralink SoC Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
- obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
-+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
-
- # PARISC Architecture
-
---- /dev/null
-+++ b/drivers/watchdog/mt7621_wdt.c
-@@ -0,0 +1,185 @@
-+/*
-+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
-+ *
-+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * This driver was based on: drivers/watchdog/softdog.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/watchdog.h>
-+#include <linux/miscdevice.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define SYSC_RSTSTAT 0x38
-+#define WDT_RST_CAUSE BIT(1)
-+
-+#define RALINK_WDT_TIMEOUT 30
-+
-+#define TIMER_REG_TMRSTAT 0x00
-+#define TIMER_REG_TMR1LOAD 0x24
-+#define TIMER_REG_TMR1CTL 0x20
-+
-+#define TMR1CTL_ENABLE BIT(7)
-+#define TMR1CTL_RESTART BIT(9)
-+
-+static void __iomem *mt762x_wdt_base;
-+
-+static bool nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, bool, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+static inline void rt_wdt_w32(unsigned reg, u32 val)
-+{
-+ iowrite32(val, mt762x_wdt_base + reg);
-+}
-+
-+static inline u32 rt_wdt_r32(unsigned reg)
-+{
-+ return ioread32(mt762x_wdt_base + reg);
-+}
-+
-+static int mt762x_wdt_ping(struct watchdog_device *w)
-+{
-+ rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
-+{
-+ w->timeout = t;
-+ rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
-+ mt762x_wdt_ping(w);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_start(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << 16);
-+ mt762x_wdt_set_timeout(w, w->timeout);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t |= TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_stop(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ mt762x_wdt_ping(w);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t &= ~TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_bootcause(void)
-+{
-+ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
-+ return WDIOF_CARDRESET;
-+
-+ return 0;
-+}
-+
-+static struct watchdog_info mt762x_wdt_info = {
-+ .identity = "Mediatek Watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-+};
-+
-+static struct watchdog_ops mt762x_wdt_ops = {
-+ .owner = THIS_MODULE,
-+ .start = mt762x_wdt_start,
-+ .stop = mt762x_wdt_stop,
-+ .ping = mt762x_wdt_ping,
-+ .set_timeout = mt762x_wdt_set_timeout,
-+};
-+
-+static struct watchdog_device mt762x_wdt_dev = {
-+ .info = &mt762x_wdt_info,
-+ .ops = &mt762x_wdt_ops,
-+ .min_timeout = 1,
-+};
-+
-+static int mt762x_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int ret;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mt762x_wdt_base = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(mt762x_wdt_base))
-+ return PTR_ERR(mt762x_wdt_base);
-+
-+ device_reset(&pdev->dev);
-+
-+ mt762x_wdt_dev.dev = &pdev->dev;
-+ mt762x_wdt_dev.bootstatus = mt762x_wdt_bootcause();
-+ mt762x_wdt_dev.max_timeout = (0xfffful / 1000);
-+ mt762x_wdt_dev.timeout = mt762x_wdt_dev.max_timeout;
-+
-+ watchdog_set_nowayout(&mt762x_wdt_dev, nowayout);
-+
-+ ret = watchdog_register_device(&mt762x_wdt_dev);
-+ if (!ret)
-+ dev_info(&pdev->dev, "Initialized\n");
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_remove(struct platform_device *pdev)
-+{
-+ watchdog_unregister_device(&mt762x_wdt_dev);
-+
-+ return 0;
-+}
-+
-+static void mt762x_wdt_shutdown(struct platform_device *pdev)
-+{
-+ mt762x_wdt_stop(&mt762x_wdt_dev);
-+}
-+
-+static const struct of_device_id mt762x_wdt_match[] = {
-+ { .compatible = "mtk,mt7621-wdt" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt762x_wdt_match);
-+
-+static struct platform_driver mt762x_wdt_driver = {
-+ .probe = mt762x_wdt_probe,
-+ .remove = mt762x_wdt_remove,
-+ .shutdown = mt762x_wdt_shutdown,
-+ .driver = {
-+ .name = KBUILD_MODNAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt762x_wdt_match,
-+ },
-+};
-+
-+module_platform_driver(mt762x_wdt_driver);
-+
-+MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch
deleted file mode 100644
index e0a0db8..0000000
--- a/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From 2a9b5a9fc1a0707b95dbe61dd1c30b9337cb457d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:26:34 +0000
-Subject: [PATCH 212/215] GPIO: ralink: add mt7621 gpio controller
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 5 +-
- drivers/gpio/Kconfig | 6 ++
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mt7621.c | 183 ++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 194 insertions(+), 1 deletion(-)
- create mode 100644 drivers/gpio/gpio-mt7621.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -448,7 +448,10 @@ config RALINK
- select ARCH_REQUIRE_GPIOLIB
- select PINCTRL
- select PINCTRL_RT2880
--
-+ select ARCH_HAS_RESET_CONTROLLER
-+ select RESET_CONTROLLER
-+ select ARCH_REQUIRE_GPIOLIB
-+
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
- select FW_ARC
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -710,6 +710,12 @@ config GPIO_MSIC
- Enable support for GPIO on intel MSIC controllers found in
- intel MID devices
-
-+config GPIO_MT7621
-+ bool "Mediatek GPIO Support"
-+ depends on SOC_MT7621
-+ help
-+ Say yes here to support the Mediatek SoC GPIO device
-+
- comment "USB GPIO expanders:"
-
- config GPIO_VIPERBOARD
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x
- obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
- obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
- obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
-+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mt7621.c
-@@ -0,0 +1,183 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/module.h>
-+#include <linux/of_irq.h>
-+#include <linux/spinlock.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#define MTK_BANK_WIDTH 32
-+
-+enum mediatek_gpio_reg {
-+ GPIO_REG_CTRL = 0,
-+ GPIO_REG_POL,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DSET,
-+ GPIO_REG_DCLR,
-+};
-+
-+static void __iomem *mtk_gc_membase;
-+
-+struct mtk_gc {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ int bank;
-+};
-+
-+int
-+gpio_to_irq(unsigned gpio)
-+{
-+ return -1;
-+}
-+
-+static inline struct mtk_gc
-+*to_mediatek_gpio(struct gpio_chip *chip)
-+{
-+ struct mtk_gc *mgc;
-+
-+ mgc = container_of(chip, struct mtk_gc, chip);
-+
-+ return mgc;
-+}
-+
-+static inline void
-+mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static inline u32
-+mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
-+{
-+ return ioread32(mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static void
-+mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t &= ~BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t |= BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ mediatek_gpio_set(chip, offset, value);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
-+{
-+ const __be32 *id = of_get_property(bank, "reg", NULL);
-+ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct mtk_gc), GFP_KERNEL);
-+ if (!rg || !id)
-+ return -ENOMEM;
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.dev = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = bank;
-+ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
-+ rg->chip.ngpio = MTK_BANK_WIDTH;
-+ rg->chip.direction_input = mediatek_gpio_direction_input;
-+ rg->chip.direction_output = mediatek_gpio_direction_output;
-+ rg->chip.get = mediatek_gpio_get;
-+ rg->chip.set = mediatek_gpio_set;
-+
-+ /* set polarity to low for all gpios */
-+ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static int
-+mediatek_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *bank, *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ mtk_gc_membase = devm_request_and_ioremap(&pdev->dev, res);
-+ if (IS_ERR(mtk_gc_membase))
-+ return PTR_ERR(mtk_gc_membase);
-+
-+ for_each_child_of_node(np, bank)
-+ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
-+ mediatek_gpio_bank_probe(pdev, bank);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mediatek_gpio_match[] = {
-+ { .compatible = "mtk,mt7621-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
-+
-+static struct platform_driver mediatek_gpio_driver = {
-+ .probe = mediatek_gpio_probe,
-+ .driver = {
-+ .name = "mt7621_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gpio_match,
-+ },
-+};
-+
-+static int __init
-+mediatek_gpio_init(void)
-+{
-+ return platform_driver_register(&mediatek_gpio_driver);
-+}
-+
-+subsys_initcall(mediatek_gpio_init);
diff --git a/target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch b/target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch
deleted file mode 100644
index 93ce9e1..0000000
--- a/target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch
+++ /dev/null
@@ -1,4419 +0,0 @@
-From 3598d232eb3456fa7aca78e6eeea64210b49c1fc Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 Jan 2014 17:01:21 +0100
-Subject: [PATCH 213/215] MTD: add mt7621 nand support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/Kconfig | 6 +
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/bmt.c | 750 ++++++++++++
- drivers/mtd/nand/bmt.h | 80 ++
- drivers/mtd/nand/dev-nand.c | 63 +
- drivers/mtd/nand/mt6575_typedefs.h | 340 ++++++
- drivers/mtd/nand/mtk_nand.c | 2304 +++++++++++++++++++++++++++++++++++
- drivers/mtd/nand/mtk_nand.h | 452 +++++++
- drivers/mtd/nand/nand_base.c | 6 +-
- drivers/mtd/nand/nand_bbt.c | 41 +
- drivers/mtd/nand/nand_def.h | 123 ++
- drivers/mtd/nand/nand_device_list.h | 55 +
- drivers/mtd/nand/partition.h | 115 ++
- 13 files changed, 4333 insertions(+), 3 deletions(-)
- create mode 100644 drivers/mtd/nand/bmt.c
- create mode 100644 drivers/mtd/nand/bmt.h
- create mode 100644 drivers/mtd/nand/dev-nand.c
- create mode 100644 drivers/mtd/nand/mt6575_typedefs.h
- create mode 100644 drivers/mtd/nand/mtk_nand.c
- create mode 100644 drivers/mtd/nand/mtk_nand.h
- create mode 100644 drivers/mtd/nand/nand_def.h
- create mode 100644 drivers/mtd/nand/nand_device_list.h
- create mode 100644 drivers/mtd/nand/partition.h
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -544,4 +544,10 @@ config MTD_NAND_XWAY
- Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- to the External Bus Unit (EBU).
-
-+config MTK_MTD_NAND
-+ tristate "Support for MTK SoC NAND controller"
-+ depends on SOC_MT7621
-+ select MTD_NAND_IDS
-+ select MTD_NAND_ECC
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
- obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
-+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
-
- nand-objs := nand_base.o nand_bbt.o
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.c
-@@ -0,0 +1,750 @@
-+#include "bmt.h"
-+
-+typedef struct
-+{
-+ char signature[3];
-+ u8 version;
-+ u8 bad_count; // bad block count in pool
-+ u8 mapped_count; // mapped block count in pool
-+ u8 checksum;
-+ u8 reseverd[13];
-+} phys_bmt_header;
-+
-+typedef struct
-+{
-+ phys_bmt_header header;
-+ bmt_entry table[MAX_BMT_SIZE];
-+} phys_bmt_struct;
-+
-+typedef struct
-+{
-+ char signature[3];
-+} bmt_oob_data;
-+
-+static char MAIN_SIGNATURE[] = "BMT";
-+static char OOB_SIGNATURE[] = "bmt";
-+#define SIGNATURE_SIZE (3)
-+
-+#define MAX_DAT_SIZE 0x1000
-+#define MAX_OOB_SIZE 0x80
-+
-+static struct mtd_info *mtd_bmt;
-+static struct nand_chip *nand_chip_bmt;
-+#define BLOCK_SIZE_BMT (1 << nand_chip_bmt->phys_erase_shift)
-+#define PAGE_SIZE_BMT (1 << nand_chip_bmt->page_shift)
-+
-+#define OFFSET(block) ((block) * BLOCK_SIZE_BMT)
-+#define PAGE_ADDR(block) ((block) * BLOCK_SIZE_BMT / PAGE_SIZE_BMT)
-+
-+/*********************************************************************
-+* Flash is splited into 2 parts, system part is for normal system *
-+* system usage, size is system_block_count, another is replace pool *
-+* +-------------------------------------------------+ *
-+* | system_block_count | bmt_block_count | *
-+* +-------------------------------------------------+ *
-+*********************************************************************/
-+static u32 total_block_count; // block number in flash
-+static u32 system_block_count;
-+static int bmt_block_count; // bmt table size
-+// static int bmt_count; // block used in bmt
-+static int page_per_block; // page per count
-+
-+static u32 bmt_block_index; // bmt block index
-+static bmt_struct bmt; // dynamic created global bmt table
-+
-+static u8 dat_buf[MAX_DAT_SIZE];
-+static u8 oob_buf[MAX_OOB_SIZE];
-+static bool pool_erased;
-+
-+/***************************************************************
-+*
-+* Interface adaptor for preloader/uboot/kernel
-+* These interfaces operate on physical address, read/write
-+* physical data.
-+*
-+***************************************************************/
-+int nand_read_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ return mtk_nand_exec_read_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob);
-+}
-+
-+bool nand_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_bad_hw(mtd_bmt, offset);
-+}
-+
-+bool nand_erase_bmt(u32 offset)
-+{
-+ int status;
-+ if (offset < 0x20000)
-+ {
-+ MSG(INIT, "erase offset: 0x%x\n", offset);
-+ }
-+
-+ status = mtk_nand_erase_hw(mtd_bmt, offset / PAGE_SIZE_BMT); // as nand_chip structure doesn't have a erase function defined
-+ if (status & NAND_STATUS_FAIL)
-+ return false;
-+ else
-+ return true;
-+}
-+
-+int mark_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_markbad_hw(mtd_bmt, offset); //mark_block_bad_hw(offset);
-+}
-+
-+bool nand_write_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ if (mtk_nand_exec_write_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob))
-+ return false;
-+ else
-+ return true;
-+}
-+
-+/***************************************************************
-+* *
-+* static internal function *
-+* *
-+***************************************************************/
-+static void dump_bmt_info(bmt_struct * bmt)
-+{
-+ int i;
-+
-+ MSG(INIT, "BMT v%d. total %d mapping:\n", bmt->version, bmt->mapped_count);
-+ for (i = 0; i < bmt->mapped_count; i++)
-+ {
-+ MSG(INIT, "\t0x%x -> 0x%x\n", bmt->table[i].bad_index, bmt->table[i].mapped_index);
-+ }
-+}
-+
-+static bool match_bmt_signature(u8 * dat, u8 * oob)
-+{
-+
-+ if (memcmp(dat + MAIN_SIGNATURE_OFFSET, MAIN_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ return false;
-+ }
-+
-+ if (memcmp(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ MSG(INIT, "main signature match, oob signature doesn't match, but ignore\n");
-+ }
-+ return true;
-+}
-+
-+static u8 cal_bmt_checksum(phys_bmt_struct * phys_table, int bmt_size)
-+{
-+ int i;
-+ u8 checksum = 0;
-+ u8 *dat = (u8 *) phys_table;
-+
-+ checksum += phys_table->header.version;
-+ checksum += phys_table->header.mapped_count;
-+
-+ dat += sizeof(phys_bmt_header);
-+ for (i = 0; i < bmt_size * sizeof(bmt_entry); i++)
-+ {
-+ checksum += dat[i];
-+ }
-+
-+ return checksum;
-+}
-+
-+
-+static int is_block_mapped(int index)
-+{
-+ int i;
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (index == bmt.table[i].mapped_index)
-+ return i;
-+ }
-+ return -1;
-+}
-+
-+static bool is_page_used(u8 * dat, u8 * oob)
-+{
-+ return ((oob[OOB_INDEX_OFFSET] != 0xFF) || (oob[OOB_INDEX_OFFSET + 1] != 0xFF));
-+}
-+
-+static bool valid_bmt_data(phys_bmt_struct * phys_table)
-+{
-+ int i;
-+ u8 checksum = cal_bmt_checksum(phys_table, bmt_block_count);
-+
-+ // checksum correct?
-+ if (phys_table->header.checksum != checksum)
-+ {
-+ MSG(INIT, "BMT Data checksum error: %x %x\n", phys_table->header.checksum, checksum);
-+ return false;
-+ }
-+
-+ MSG(INIT, "BMT Checksum is: 0x%x\n", phys_table->header.checksum);
-+
-+ // block index correct?
-+ for (i = 0; i < phys_table->header.mapped_count; i++)
-+ {
-+ if (phys_table->table[i].bad_index >= total_block_count || phys_table->table[i].mapped_index >= total_block_count || phys_table->table[i].mapped_index < system_block_count)
-+ {
-+ MSG(INIT, "index error: bad_index: %d, mapped_index: %d\n", phys_table->table[i].bad_index, phys_table->table[i].mapped_index);
-+ return false;
-+ }
-+ }
-+
-+ // pass check, valid bmt.
-+ MSG(INIT, "Valid BMT, version v%d\n", phys_table->header.version);
-+ return true;
-+}
-+
-+static void fill_nand_bmt_buffer(bmt_struct * bmt, u8 * dat, u8 * oob)
-+{
-+ phys_bmt_struct phys_bmt;
-+
-+ dump_bmt_info(bmt);
-+
-+ // fill phys_bmt_struct structure with bmt_struct
-+ memset(&phys_bmt, 0xFF, sizeof(phys_bmt));
-+
-+ memcpy(phys_bmt.header.signature, MAIN_SIGNATURE, SIGNATURE_SIZE);
-+ phys_bmt.header.version = BMT_VERSION;
-+ // phys_bmt.header.bad_count = bmt->bad_count;
-+ phys_bmt.header.mapped_count = bmt->mapped_count;
-+ memcpy(phys_bmt.table, bmt->table, sizeof(bmt_entry) * bmt_block_count);
-+
-+ phys_bmt.header.checksum = cal_bmt_checksum(&phys_bmt, bmt_block_count);
-+
-+ memcpy(dat + MAIN_SIGNATURE_OFFSET, &phys_bmt, sizeof(phys_bmt));
-+ memcpy(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE);
-+}
-+
-+// return valid index if found BMT, else return 0
-+static int load_bmt_data(int start, int pool_size)
-+{
-+ int bmt_index = start + pool_size - 1; // find from the end
-+ phys_bmt_struct phys_table;
-+ int i;
-+
-+ MSG(INIT, "[%s]: begin to search BMT from block 0x%x\n", __FUNCTION__, bmt_index);
-+
-+ for (bmt_index = start + pool_size - 1; bmt_index >= start; bmt_index--)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(bmt_index)))
-+ {
-+ MSG(INIT, "Skip bad block: %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!nand_read_page_bmt(PAGE_ADDR(bmt_index), dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Error found when read block %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!match_bmt_signature(dat_buf, oob_buf))
-+ {
-+ continue;
-+ }
-+
-+ MSG(INIT, "Match bmt signature @ block: 0x%x\n", bmt_index);
-+
-+ memcpy(&phys_table, dat_buf + MAIN_SIGNATURE_OFFSET, sizeof(phys_table));
-+
-+ if (!valid_bmt_data(&phys_table))
-+ {
-+ MSG(INIT, "BMT data is not correct %d\n", bmt_index);
-+ continue;
-+ } else
-+ {
-+ bmt.mapped_count = phys_table.header.mapped_count;
-+ bmt.version = phys_table.header.version;
-+ // bmt.bad_count = phys_table.header.bad_count;
-+ memcpy(bmt.table, phys_table.table, bmt.mapped_count * sizeof(bmt_entry));
-+
-+ MSG(INIT, "bmt found at block: %d, mapped block: %d\n", bmt_index, bmt.mapped_count);
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (!nand_block_bad_bmt(OFFSET(bmt.table[i].bad_index)))
-+ {
-+ MSG(INIT, "block 0x%x is not mark bad, should be power lost last time\n", bmt.table[i].bad_index);
-+ mark_block_bad_bmt(OFFSET(bmt.table[i].bad_index));
-+ }
-+ }
-+
-+ return bmt_index;
-+ }
-+ }
-+
-+ MSG(INIT, "bmt block not found!\n");
-+ return 0;
-+}
-+
-+/*************************************************************************
-+* Find an available block and erase. *
-+* start_from_end: if true, find available block from end of flash. *
-+* else, find from the beginning of the pool *
-+* need_erase: if true, all unmapped blocks in the pool will be erased *
-+*************************************************************************/
-+static int find_available_block(bool start_from_end)
-+{
-+ int i; // , j;
-+ int block = system_block_count;
-+ int direction;
-+ // int avail_index = 0;
-+ MSG(INIT, "Try to find_available_block, pool_erase: %d\n", pool_erased);
-+
-+ // erase all un-mapped blocks in pool when finding avaliable block
-+ if (!pool_erased)
-+ {
-+ MSG(INIT, "Erase all un-mapped blocks in pool\n");
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block + i);
-+ continue;
-+ }
-+//if(block==4095)
-+//{
-+// continue;
-+//}
-+
-+ if (is_block_mapped(block + i) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block + i);
-+ continue;
-+ }
-+
-+ if (!nand_erase_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Erase block 0x%x failed\n", block + i);
-+ mark_block_bad_bmt(OFFSET(block + i));
-+ }
-+ }
-+
-+ pool_erased = 1;
-+ }
-+
-+ if (start_from_end)
-+ {
-+ block = total_block_count - 1;
-+ direction = -1;
-+ } else
-+ {
-+ block = system_block_count;
-+ direction = 1;
-+ }
-+
-+ for (i = 0; i < bmt_block_count; i++, block += direction)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (is_block_mapped(block) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Find block 0x%x available\n", block);
-+ return block;
-+ }
-+
-+ return 0;
-+}
-+
-+static unsigned short get_bad_index_from_oob(u8 * oob_buf)
-+{
-+ unsigned short index;
-+ memcpy(&index, oob_buf + OOB_INDEX_OFFSET, OOB_INDEX_SIZE);
-+
-+ return index;
-+}
-+
-+void set_bad_index_to_oob(u8 * oob, u16 index)
-+{
-+ memcpy(oob + OOB_INDEX_OFFSET, &index, sizeof(index));
-+}
-+
-+static int migrate_from_bad(int offset, u8 * write_dat, u8 * write_oob)
-+{
-+ int page;
-+ int error_block = offset / BLOCK_SIZE_BMT;
-+ int error_page = (offset / PAGE_SIZE_BMT) % page_per_block;
-+ int to_index;
-+
-+ memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ to_index = find_available_block(false);
-+
-+ if (!to_index)
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return 0;
-+ }
-+
-+ { // migrate error page first
-+ MSG(INIT, "Write error page: 0x%x\n", error_page);
-+ if (!write_dat)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + error_page, dat_buf, NULL);
-+ write_dat = dat_buf;
-+ }
-+ // memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ if (error_block < system_block_count)
-+ set_bad_index_to_oob(oob_buf, error_block); // if error_block is already a mapped block, original mapping index is in OOB.
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + error_page, write_dat, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + error_page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+
-+ for (page = 0; page < page_per_block; page++)
-+ {
-+ if (page != error_page)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + page, dat_buf, oob_buf);
-+ if (is_page_used(dat_buf, oob_buf))
-+ {
-+ if (error_block < system_block_count)
-+ {
-+ set_bad_index_to_oob(oob_buf, error_block);
-+ }
-+ MSG(INIT, "\tmigrate page 0x%x to page 0x%x\n", PAGE_ADDR(error_block) + page, PAGE_ADDR(to_index) + page);
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + page, dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+ }
-+ }
-+
-+ MSG(INIT, "Migrate from 0x%x to 0x%x done!\n", error_block, to_index);
-+
-+ return to_index;
-+}
-+
-+static bool write_bmt_to_flash(u8 * dat, u8 * oob)
-+{
-+ bool need_erase = true;
-+ MSG(INIT, "Try to write BMT\n");
-+
-+ if (bmt_block_index == 0)
-+ {
-+ // if we don't have index, we don't need to erase found block as it has been erased in find_available_block()
-+ need_erase = false;
-+ if (!(bmt_block_index = find_available_block(true)))
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return false;
-+ }
-+ }
-+
-+ MSG(INIT, "Find BMT block: 0x%x\n", bmt_block_index);
-+
-+ // write bmt to flash
-+ if (need_erase)
-+ {
-+ if (!nand_erase_bmt(OFFSET(bmt_block_index)))
-+ {
-+ MSG(INIT, "BMT block erase fail, mark bad: 0x%x\n", bmt_block_index);
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+ }
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(bmt_block_index), dat, oob))
-+ {
-+ MSG(INIT, "Write BMT data fail, need to write again\n");
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+
-+ MSG(INIT, "Write BMT data to block 0x%x success\n", bmt_block_index);
-+ return true;
-+}
-+
-+/*******************************************************************
-+* Reconstruct bmt, called when found bmt info doesn't match bad
-+* block info in flash.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+bmt_struct *reconstruct_bmt(bmt_struct * bmt)
-+{
-+ int i;
-+ int index = system_block_count;
-+ unsigned short bad_index;
-+ int mapped;
-+
-+ // init everything in BMT struct
-+ bmt->version = BMT_VERSION;
-+ bmt->bad_count = 0;
-+ bmt->mapped_count = 0;
-+
-+ memset(bmt->table, 0, bmt_block_count * sizeof(bmt_entry));
-+
-+ for (i = 0; i < bmt_block_count; i++, index++)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(index)))
-+ {
-+ MSG(INIT, "Skip bad block: 0x%x\n", index);
-+ // bmt->bad_count++;
-+ continue;
-+ }
-+
-+ MSG(INIT, "read page: 0x%x\n", PAGE_ADDR(index));
-+ nand_read_page_bmt(PAGE_ADDR(index), dat_buf, oob_buf);
-+ /* if (mtk_nand_read_page_hw(PAGE_ADDR(index), dat_buf))
-+ {
-+ MSG(INIT, "Error when read block %d\n", bmt_block_index);
-+ continue;
-+ } */
-+
-+ if ((bad_index = get_bad_index_from_oob(oob_buf)) >= system_block_count)
-+ {
-+ MSG(INIT, "get bad index: 0x%x\n", bad_index);
-+ if (bad_index != 0xFFFF)
-+ MSG(INIT, "Invalid bad index found in block 0x%x, bad index 0x%x\n", index, bad_index);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Block 0x%x is mapped to bad block: 0x%x\n", index, bad_index);
-+
-+ if (!nand_block_bad_bmt(OFFSET(bad_index)))
-+ {
-+ MSG(INIT, "\tbut block 0x%x is not marked as bad, invalid mapping\n", bad_index);
-+ continue; // no need to erase here, it will be erased later when trying to write BMT
-+ }
-+
-+ if ((mapped = is_block_mapped(bad_index)) >= 0)
-+ {
-+ MSG(INIT, "bad block 0x%x is mapped to 0x%x, should be caused by power lost, replace with one\n", bmt->table[mapped].bad_index, bmt->table[mapped].mapped_index);
-+ bmt->table[mapped].mapped_index = index; // use new one instead.
-+ } else
-+ {
-+ // add mapping to BMT
-+ bmt->table[bmt->mapped_count].bad_index = bad_index;
-+ bmt->table[bmt->mapped_count].mapped_index = index;
-+ bmt->mapped_count++;
-+ }
-+
-+ MSG(INIT, "Add mapping: 0x%x -> 0x%x to BMT\n", bad_index, index);
-+
-+ }
-+
-+ MSG(INIT, "Scan replace pool done, mapped block: %d\n", bmt->mapped_count);
-+ // dump_bmt_info(bmt);
-+
-+ // fill NAND BMT buffer
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(bmt, dat_buf, oob_buf);
-+
-+ // write BMT back
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "TRAGEDY: cannot find a place to write BMT!!!!\n");
-+ }
-+
-+ return bmt;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Init bmt from nand. Reconstruct if not found or data error
-+*
-+* Parameter:
-+* size: size of bmt and replace pool
-+*
-+* Return:
-+* NULL for failure, and a bmt struct for success
-+*******************************************************************/
-+bmt_struct *init_bmt(struct nand_chip * chip, int size)
-+{
-+ struct mtk_nand_host *host;
-+
-+ if (size > 0 && size < MAX_BMT_SIZE)
-+ {
-+ MSG(INIT, "Init bmt table, size: %d\n", size);
-+ bmt_block_count = size;
-+ } else
-+ {
-+ MSG(INIT, "Invalid bmt table size: %d\n", size);
-+ return NULL;
-+ }
-+ nand_chip_bmt = chip;
-+ system_block_count = chip->chipsize >> chip->phys_erase_shift;
-+ total_block_count = bmt_block_count + system_block_count;
-+ page_per_block = BLOCK_SIZE_BMT / PAGE_SIZE_BMT;
-+ host = (struct mtk_nand_host *)chip->priv;
-+ mtd_bmt = &host->mtd;
-+
-+ MSG(INIT, "mtd_bmt: %p, nand_chip_bmt: %p\n", mtd_bmt, nand_chip_bmt);
-+ MSG(INIT, "bmt count: %d, system count: %d\n", bmt_block_count, system_block_count);
-+
-+ // set this flag, and unmapped block in pool will be erased.
-+ pool_erased = 0;
-+ memset(bmt.table, 0, size * sizeof(bmt_entry));
-+ if ((bmt_block_index = load_bmt_data(system_block_count, size)))
-+ {
-+ MSG(INIT, "Load bmt data success @ block 0x%x\n", bmt_block_index);
-+ dump_bmt_info(&bmt);
-+ return &bmt;
-+ } else
-+ {
-+ MSG(INIT, "Load bmt data fail, need re-construct!\n");
-+#ifndef __UBOOT_NAND__ // BMT is not re-constructed in UBOOT.
-+ if (reconstruct_bmt(&bmt))
-+ return &bmt;
-+ else
-+#endif
-+ return NULL;
-+ }
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Update BMT.
-+*
-+* Parameter:
-+* offset: update block/page offset.
-+* reason: update reason, see update_reason_t for reason.
-+* dat/oob: data and oob buffer for write fail.
-+*
-+* Return:
-+* Return true for success, and false for failure.
-+*******************************************************************/
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob)
-+{
-+ int map_index;
-+ int orig_bad_block = -1;
-+ // int bmt_update_index;
-+ int i;
-+ int bad_index = offset / BLOCK_SIZE_BMT;
-+
-+#ifndef MTK_NAND_BMT
-+ return false;
-+#endif
-+ if (reason == UPDATE_WRITE_FAIL)
-+ {
-+ MSG(INIT, "Write fail, need to migrate\n");
-+ if (!(map_index = migrate_from_bad(offset, dat, oob)))
-+ {
-+ MSG(INIT, "migrate fail\n");
-+ return false;
-+ }
-+ } else
-+ {
-+ if (!(map_index = find_available_block(false)))
-+ {
-+ MSG(INIT, "Cannot find block in pool\n");
-+ return false;
-+ }
-+ }
-+
-+ // now let's update BMT
-+ if (bad_index >= system_block_count) // mapped block become bad, find original bad block
-+ {
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (bmt.table[i].mapped_index == bad_index)
-+ {
-+ orig_bad_block = bmt.table[i].bad_index;
-+ break;
-+ }
-+ }
-+ // bmt.bad_count++;
-+ MSG(INIT, "Mapped block becomes bad, orig bad block is 0x%x\n", orig_bad_block);
-+
-+ bmt.table[i].mapped_index = map_index;
-+ } else
-+ {
-+ bmt.table[bmt.mapped_count].mapped_index = map_index;
-+ bmt.table[bmt.mapped_count].bad_index = bad_index;
-+ bmt.mapped_count++;
-+ }
-+
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(&bmt, dat_buf, oob_buf);
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ return false;
-+
-+ mark_block_bad_bmt(offset);
-+
-+ return true;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Given an block index, return mapped index if it's mapped, else
-+* return given index.
-+*
-+* Parameter:
-+* index: given an block index. This value cannot exceed
-+* system_block_count.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+u16 get_mapping_block_index(int index)
-+{
-+ int i;
-+#ifndef MTK_NAND_BMT
-+ return index;
-+#endif
-+ if (index > system_block_count)
-+ {
-+ return index;
-+ }
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (bmt.table[i].bad_index == index)
-+ {
-+ return bmt.table[i].mapped_index;
-+ }
-+ }
-+
-+ return index;
-+}
-+#ifdef __KERNEL_NAND__
-+EXPORT_SYMBOL_GPL(init_bmt);
-+EXPORT_SYMBOL_GPL(update_bmt);
-+EXPORT_SYMBOL_GPL(get_mapping_block_index);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("MediaTek");
-+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.h
-@@ -0,0 +1,80 @@
-+#ifndef __BMT_H__
-+#define __BMT_H__
-+
-+#include "nand_def.h"
-+
-+#if defined(__PRELOADER_NAND__)
-+
-+#include "nand.h"
-+
-+#elif defined(__UBOOT_NAND__)
-+
-+#include <linux/mtd/nand.h>
-+#include "mtk_nand.h"
-+
-+#elif defined(__KERNEL_NAND__)
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/module.h>
-+#include "mtk_nand.h"
-+
-+#endif
-+
-+
-+#define MAX_BMT_SIZE (0x80)
-+#define BMT_VERSION (1) // initial version
-+
-+#define MAIN_SIGNATURE_OFFSET (0)
-+#define OOB_SIGNATURE_OFFSET (1)
-+#define OOB_INDEX_OFFSET (29)
-+#define OOB_INDEX_SIZE (2)
-+#define FAKE_INDEX (0xAAAA)
-+
-+typedef struct _bmt_entry_
-+{
-+ u16 bad_index; // bad block index
-+ u16 mapped_index; // mapping block index in the replace pool
-+} bmt_entry;
-+
-+typedef enum
-+{
-+ UPDATE_ERASE_FAIL,
-+ UPDATE_WRITE_FAIL,
-+ UPDATE_UNMAPPED_BLOCK,
-+ UPDATE_REASON_COUNT,
-+} update_reason_t;
-+
-+typedef struct
-+{
-+ bmt_entry table[MAX_BMT_SIZE];
-+ u8 version;
-+ u8 mapped_count; // mapped block count in pool
-+ u8 bad_count; // bad block count in pool. Not used in V1
-+} bmt_struct;
-+
-+/***************************************************************
-+* *
-+* Interface BMT need to use *
-+* *
-+***************************************************************/
-+extern bool mtk_nand_exec_read_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+extern int mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_erase_hw(struct mtd_info *mtd, int page);
-+extern int mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_exec_write_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+
-+
-+/***************************************************************
-+* *
-+* Different function interface for preloader/uboot/kernel *
-+* *
-+***************************************************************/
-+void set_bad_index_to_oob(u8 * oob, u16 index);
-+
-+
-+bmt_struct *init_bmt(struct nand_chip *nand, int size);
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob);
-+unsigned short get_mapping_block_index(int index);
-+
-+#endif // #ifndef __BMT_H__
---- /dev/null
-+++ b/drivers/mtd/nand/dev-nand.c
-@@ -0,0 +1,63 @@
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include "mt6575_typedefs.h"
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define NFI_base RALINK_NAND_CTRL_BASE
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+#define NFIECC_base RALINK_NANDECC_CTRL_BASE
-+#define MT7621_NFI_IRQ_ID SURFBOARDINT_NAND
-+#define MT7621_NFIECC_IRQ_ID SURFBOARDINT_NAND_ECC
-+
-+#define SURFBOARDINT_NAND 22
-+#define SURFBOARDINT_NAND_ECC 23
-+
-+static struct resource MT7621_resource_nand[] = {
-+ {
-+ .start = NFI_base,
-+ .end = NFI_base + 0x1A0,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = NFIECC_base,
-+ .end = NFIECC_base + 0x150,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = MT7621_NFI_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = MT7621_NFIECC_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device MT7621_nand_dev = {
-+ .name = "MT7621-NAND",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(MT7621_resource_nand),
-+ .resource = MT7621_resource_nand,
-+ .dev = {
-+ .platform_data = &mt7621_nand_hw,
-+ },
-+};
-+
-+
-+int __init mtk_nand_register(void)
-+{
-+
-+ int retval = 0;
-+
-+ retval = platform_device_register(&MT7621_nand_dev);
-+ if (retval != 0) {
-+ printk(KERN_ERR "register nand device fail\n");
-+ return retval;
-+ }
-+
-+
-+ return retval;
-+}
-+arch_initcall(mtk_nand_register);
---- /dev/null
-+++ b/drivers/mtd/nand/mt6575_typedefs.h
-@@ -0,0 +1,340 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+/*****************************************************************************
-+* Copyright Statement:
-+* --------------------
-+* This software is protected by Copyright and the information contained
-+* herein is confidential. The software may not be copied and the information
-+* contained herein may not be used or disclosed except with the written
-+* permission of MediaTek Inc. (C) 2008
-+*
-+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
-+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
-+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
-+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
-+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
-+*
-+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
-+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
-+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+*
-+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
-+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
-+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
-+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
-+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
-+*
-+*****************************************************************************/
-+
-+#ifndef _MT6575_TYPEDEFS_H
-+#define _MT6575_TYPEDEFS_H
-+
-+#if defined (__KERNEL_NAND__)
-+#include <linux/bug.h>
-+#else
-+#define true 1
-+#define false 0
-+#define bool u8
-+#endif
-+
-+// ---------------------------------------------------------------------------
-+// Basic Type Definitions
-+// ---------------------------------------------------------------------------
-+
-+typedef volatile unsigned char *P_kal_uint8;
-+typedef volatile unsigned short *P_kal_uint16;
-+typedef volatile unsigned int *P_kal_uint32;
-+
-+typedef long LONG;
-+typedef unsigned char UBYTE;
-+typedef short SHORT;
-+
-+typedef signed char kal_int8;
-+typedef signed short kal_int16;
-+typedef signed int kal_int32;
-+typedef long long kal_int64;
-+typedef unsigned char kal_uint8;
-+typedef unsigned short kal_uint16;
-+typedef unsigned int kal_uint32;
-+typedef unsigned long long kal_uint64;
-+typedef char kal_char;
-+
-+typedef unsigned int *UINT32P;
-+typedef volatile unsigned short *UINT16P;
-+typedef volatile unsigned char *UINT8P;
-+typedef unsigned char *U8P;
-+
-+typedef volatile unsigned char *P_U8;
-+typedef volatile signed char *P_S8;
-+typedef volatile unsigned short *P_U16;
-+typedef volatile signed short *P_S16;
-+typedef volatile unsigned int *P_U32;
-+typedef volatile signed int *P_S32;
-+typedef unsigned long long *P_U64;
-+typedef signed long long *P_S64;
-+
-+typedef unsigned char U8;
-+typedef signed char S8;
-+typedef unsigned short U16;
-+typedef signed short S16;
-+typedef unsigned int U32;
-+typedef signed int S32;
-+typedef unsigned long long U64;
-+typedef signed long long S64;
-+//typedef unsigned char bool;
-+
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int UINT32;
-+typedef unsigned short USHORT;
-+typedef signed char INT8;
-+typedef signed short INT16;
-+typedef signed int INT32;
-+typedef unsigned int DWORD;
-+typedef void VOID;
-+typedef unsigned char BYTE;
-+typedef float FLOAT;
-+
-+typedef char *LPCSTR;
-+typedef short *LPWSTR;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Constants
-+// ---------------------------------------------------------------------------
-+
-+#define IMPORT EXTERN
-+#ifndef __cplusplus
-+ #define EXTERN extern
-+#else
-+ #define EXTERN extern "C"
-+#endif
-+#define LOCAL static
-+#define GLOBAL
-+#define EXPORT GLOBAL
-+
-+#define EQ ==
-+#define NEQ !=
-+#define AND &&
-+#define OR ||
-+#define XOR(A,B) ((!(A) AND (B)) OR ((A) AND !(B)))
-+
-+#ifndef FALSE
-+ #define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+ #define TRUE (1)
-+#endif
-+
-+#ifndef NULL
-+ #define NULL (0)
-+#endif
-+
-+//enum boolean {false, true};
-+enum {RX, TX, NONE};
-+
-+#ifndef BOOL
-+typedef unsigned char BOOL;
-+#endif
-+
-+typedef enum {
-+ KAL_FALSE = 0,
-+ KAL_TRUE = 1,
-+} kal_bool;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Type Casting
-+// ---------------------------------------------------------------------------
-+
-+#define AS_INT32(x) (*(INT32 *)((void*)x))
-+#define AS_INT16(x) (*(INT16 *)((void*)x))
-+#define AS_INT8(x) (*(INT8 *)((void*)x))
-+
-+#define AS_UINT32(x) (*(UINT32 *)((void*)x))
-+#define AS_UINT16(x) (*(UINT16 *)((void*)x))
-+#define AS_UINT8(x) (*(UINT8 *)((void*)x))
-+
-+
-+// ---------------------------------------------------------------------------
-+// Register Manipulations
-+// ---------------------------------------------------------------------------
-+
-+#define READ_REGISTER_UINT32(reg) \
-+ (*(volatile UINT32 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT32(reg, val) \
-+ (*(volatile UINT32 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT16(reg) \
-+ (*(volatile UINT16 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT16(reg, val) \
-+ (*(volatile UINT16 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT8(reg) \
-+ (*(volatile UINT8 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT8(reg, val) \
-+ (*(volatile UINT8 * const)(reg)) = (val)
-+
-+#define INREG8(x) READ_REGISTER_UINT8((UINT8*)((void*)(x)))
-+#define OUTREG8(x, y) WRITE_REGISTER_UINT8((UINT8*)((void*)(x)), (UINT8)(y))
-+#define SETREG8(x, y) OUTREG8(x, INREG8(x)|(y))
-+#define CLRREG8(x, y) OUTREG8(x, INREG8(x)&~(y))
-+#define MASKREG8(x, y, z) OUTREG8(x, (INREG8(x)&~(y))|(z))
-+
-+#define INREG16(x) READ_REGISTER_UINT16((UINT16*)((void*)(x)))
-+#define OUTREG16(x, y) WRITE_REGISTER_UINT16((UINT16*)((void*)(x)),(UINT16)(y))
-+#define SETREG16(x, y) OUTREG16(x, INREG16(x)|(y))
-+#define CLRREG16(x, y) OUTREG16(x, INREG16(x)&~(y))
-+#define MASKREG16(x, y, z) OUTREG16(x, (INREG16(x)&~(y))|(z))
-+
-+#define INREG32(x) READ_REGISTER_UINT32((UINT32*)((void*)(x)))
-+#define OUTREG32(x, y) WRITE_REGISTER_UINT32((UINT32*)((void*)(x)), (UINT32)(y))
-+#define SETREG32(x, y) OUTREG32(x, INREG32(x)|(y))
-+#define CLRREG32(x, y) OUTREG32(x, INREG32(x)&~(y))
-+#define MASKREG32(x, y, z) OUTREG32(x, (INREG32(x)&~(y))|(z))
-+
-+
-+#define DRV_Reg8(addr) INREG8(addr)
-+#define DRV_WriteReg8(addr, data) OUTREG8(addr, data)
-+#define DRV_SetReg8(addr, data) SETREG8(addr, data)
-+#define DRV_ClrReg8(addr, data) CLRREG8(addr, data)
-+
-+#define DRV_Reg16(addr) INREG16(addr)
-+#define DRV_WriteReg16(addr, data) OUTREG16(addr, data)
-+#define DRV_SetReg16(addr, data) SETREG16(addr, data)
-+#define DRV_ClrReg16(addr, data) CLRREG16(addr, data)
-+
-+#define DRV_Reg32(addr) INREG32(addr)
-+#define DRV_WriteReg32(addr, data) OUTREG32(addr, data)
-+#define DRV_SetReg32(addr, data) SETREG32(addr, data)
-+#define DRV_ClrReg32(addr, data) CLRREG32(addr, data)
-+
-+// !!! DEPRECATED, WILL BE REMOVED LATER !!!
-+#define DRV_Reg(addr) DRV_Reg16(addr)
-+#define DRV_WriteReg(addr, data) DRV_WriteReg16(addr, data)
-+#define DRV_SetReg(addr, data) DRV_SetReg16(addr, data)
-+#define DRV_ClrReg(addr, data) DRV_ClrReg16(addr, data)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Compiler Time Deduction Macros
-+// ---------------------------------------------------------------------------
-+
-+#define _MASK_OFFSET_1(x, n) ((x) & 0x1) ? (n) :
-+#define _MASK_OFFSET_2(x, n) _MASK_OFFSET_1((x), (n)) _MASK_OFFSET_1((x) >> 1, (n) + 1)
-+#define _MASK_OFFSET_4(x, n) _MASK_OFFSET_2((x), (n)) _MASK_OFFSET_2((x) >> 2, (n) + 2)
-+#define _MASK_OFFSET_8(x, n) _MASK_OFFSET_4((x), (n)) _MASK_OFFSET_4((x) >> 4, (n) + 4)
-+#define _MASK_OFFSET_16(x, n) _MASK_OFFSET_8((x), (n)) _MASK_OFFSET_8((x) >> 8, (n) + 8)
-+#define _MASK_OFFSET_32(x, n) _MASK_OFFSET_16((x), (n)) _MASK_OFFSET_16((x) >> 16, (n) + 16)
-+
-+#define MASK_OFFSET_ERROR (0xFFFFFFFF)
-+
-+#define MASK_OFFSET(x) (_MASK_OFFSET_32(x, 0) MASK_OFFSET_ERROR)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Assertions
-+// ---------------------------------------------------------------------------
-+
-+#ifndef ASSERT
-+ #define ASSERT(expr) BUG_ON(!(expr))
-+#endif
-+
-+#ifndef NOT_IMPLEMENTED
-+ #define NOT_IMPLEMENTED() BUG_ON(1)
-+#endif
-+
-+#define STATIC_ASSERT(pred) STATIC_ASSERT_X(pred, __LINE__)
-+#define STATIC_ASSERT_X(pred, line) STATIC_ASSERT_XX(pred, line)
-+#define STATIC_ASSERT_XX(pred, line) \
-+ extern char assertion_failed_at_##line[(pred) ? 1 : -1]
-+
-+// ---------------------------------------------------------------------------
-+// Resolve Compiler Warnings
-+// ---------------------------------------------------------------------------
-+
-+#define NOT_REFERENCED(x) { (x) = (x); }
-+
-+
-+// ---------------------------------------------------------------------------
-+// Utilities
-+// ---------------------------------------------------------------------------
-+
-+#define MAXIMUM(A,B) (((A)>(B))?(A):(B))
-+#define MINIMUM(A,B) (((A)<(B))?(A):(B))
-+
-+#define ARY_SIZE(x) (sizeof((x)) / sizeof((x[0])))
-+#define DVT_DELAYMACRO(u4Num) \
-+{ \
-+ UINT32 u4Count = 0 ; \
-+ for (u4Count = 0; u4Count < u4Num; u4Count++ ); \
-+} \
-+
-+#define A68351B 0
-+#define B68351B 1
-+#define B68351D 2
-+#define B68351E 3
-+#define UNKNOWN_IC_VERSION 0xFF
-+
-+/* NAND driver */
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern unsigned int CFG_BLOCKSIZE;
-+
-+#endif // _MT6575_TYPEDEFS_H
-+
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -0,0 +1,2304 @@
-+/******************************************************************************
-+* mtk_nand.c - MTK NAND Flash Device Driver
-+ *
-+* Copyright 2009-2012 MediaTek Co.,Ltd.
-+ *
-+* DESCRIPTION:
-+* This file provid the other drivers nand relative functions
-+ *
-+* modification history
-+* ----------------------------------------
-+* v3.0, 11 Feb 2010, mtk
-+* ----------------------------------------
-+******************************************************************************/
-+#include "nand_def.h"
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/proc_fs.h>
-+#include <linux/time.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+#include <asm/cacheflush.h>
-+#include <asm/uaccess.h>
-+#include <linux/miscdevice.h>
-+#include "mtk_nand.h"
-+#include "nand_device_list.h"
-+
-+#include "bmt.h"
-+#include "partition.h"
-+
-+unsigned int CFG_BLOCKSIZE;
-+
-+static int shift_on_bbt = 0;
-+extern void nand_bbt_set(struct mtd_info *mtd, int page, int flag);
-+extern int nand_bbt_get(struct mtd_info *mtd, int page);
-+int mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page);
-+
-+static const char * const probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+#define NAND_CMD_STATUS_MULTI 0x71
-+
-+void show_stack(struct task_struct *tsk, unsigned long *sp);
-+extern void mt_irq_set_sens(unsigned int irq, unsigned int sens);
-+extern void mt_irq_set_polarity(unsigned int irq,unsigned int polarity);
-+
-+struct mtk_nand_host mtk_nand_host; /* include mtd_info and nand_chip structs */
-+struct mtk_nand_host_hw mt7621_nand_hw = {
-+ .nfi_bus_width = 8,
-+ .nfi_access_timing = NFI_DEFAULT_ACCESS_TIMING,
-+ .nfi_cs_num = NFI_CS_NUM,
-+ .nand_sec_size = 512,
-+ .nand_sec_shift = 9,
-+ .nand_ecc_size = 2048,
-+ .nand_ecc_bytes = 32,
-+ .nand_ecc_mode = NAND_ECC_HW,
-+};
-+
-+
-+/*******************************************************************************
-+ * Gloable Varible Definition
-+ *******************************************************************************/
-+
-+#define NFI_ISSUE_COMMAND(cmd, col_addr, row_addr, col_num, row_num) \
-+ do { \
-+ DRV_WriteReg(NFI_CMD_REG16,cmd);\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_CMD_STATE);\
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);\
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, row_addr);\
-+ DRV_WriteReg(NFI_ADDRNOB_REG16, col_num | (row_num<<ADDR_ROW_NOB_SHIFT));\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_ADDR_STATE);\
-+ }while(0);
-+
-+//-------------------------------------------------------------------------------
-+static struct NAND_CMD g_kCMD;
-+static u32 g_u4ChipVer;
-+bool g_bInitDone;
-+static bool g_bcmdstatus;
-+static u32 g_value = 0;
-+static int g_page_size;
-+
-+BOOL g_bHwEcc = true;
-+
-+
-+static u8 *local_buffer_16_align; // 16 byte aligned buffer, for HW issue
-+static u8 local_buffer[4096 + 512];
-+
-+extern void nand_release_device(struct mtd_info *mtd);
-+extern int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state);
-+
-+#if defined(MTK_NAND_BMT)
-+static bmt_struct *g_bmt;
-+#endif
-+struct mtk_nand_host *host;
-+extern struct mtd_partition g_pasStatic_Partition[];
-+int part_num = NUM_PARTITIONS;
-+int manu_id;
-+int dev_id;
-+
-+static u8 local_oob_buf[NAND_MAX_OOBSIZE];
-+
-+static u8 nand_badblock_offset = 0;
-+
-+void nand_enable_clock(void)
-+{
-+ //enable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+void nand_disable_clock(void)
-+{
-+ //disable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+static struct nand_ecclayout nand_oob_16 = {
-+ .eccbytes = 8,
-+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
-+ .oobfree = {{1, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_64 = {
-+ .eccbytes = 32,
-+ .eccpos = {32, 33, 34, 35, 36, 37, 38, 39,
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_128 = {
-+ .eccbytes = 64,
-+ .eccpos = {
-+ 64, 65, 66, 67, 68, 69, 70, 71,
-+ 72, 73, 74, 75, 76, 77, 78, 79,
-+ 80, 81, 82, 83, 84, 85, 86, 86,
-+ 88, 89, 90, 91, 92, 93, 94, 95,
-+ 96, 97, 98, 99, 100, 101, 102, 103,
-+ 104, 105, 106, 107, 108, 109, 110, 111,
-+ 112, 113, 114, 115, 116, 117, 118, 119,
-+ 120, 121, 122, 123, 124, 125, 126, 127},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 7}, {33, 7}, {41, 7}, {49, 7}, {57, 6}}
-+};
-+
-+flashdev_info devinfo;
-+
-+void dump_nfi(void)
-+{
-+}
-+
-+void dump_ecc(void)
-+{
-+}
-+
-+u32
-+nand_virt_to_phys_add(u32 va)
-+{
-+ u32 pageOffset = (va & (PAGE_SIZE - 1));
-+ pgd_t *pgd;
-+ pmd_t *pmd;
-+ pte_t *pte;
-+ u32 pa;
-+
-+ if (virt_addr_valid(va))
-+ return __virt_to_phys(va);
-+
-+ if (NULL == current) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR ,current is NULL! \n");
-+ return 0;
-+ }
-+
-+ if (NULL == current->mm) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR current->mm is NULL! tgid=0x%x, name=%s \n", current->tgid, current->comm);
-+ return 0;
-+ }
-+
-+ pgd = pgd_offset(current->mm, va); /* what is tsk->mm */
-+ if (pgd_none(*pgd) || pgd_bad(*pgd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pgd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pmd = pmd_offset((pud_t *)pgd, va);
-+ if (pmd_none(*pmd) || pmd_bad(*pmd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pmd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pte = pte_offset_map(pmd, va);
-+ if (pte_present(*pte)) {
-+ pa = (pte_val(*pte) & (PAGE_MASK)) | pageOffset;
-+ return pa;
-+ }
-+
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR va=0x%x, pte invalid! \n", va);
-+ return 0;
-+}
-+EXPORT_SYMBOL(nand_virt_to_phys_add);
-+
-+bool
-+get_device_info(u16 id, u32 ext_id, flashdev_info * pdevinfo)
-+{
-+ u32 index;
-+ for (index = 0; gen_FlashTable[index].id != 0; index++) {
-+ if (id == gen_FlashTable[index].id && ext_id == gen_FlashTable[index].ext_id) {
-+ pdevinfo->id = gen_FlashTable[index].id;
-+ pdevinfo->ext_id = gen_FlashTable[index].ext_id;
-+ pdevinfo->blocksize = gen_FlashTable[index].blocksize;
-+ pdevinfo->addr_cycle = gen_FlashTable[index].addr_cycle;
-+ pdevinfo->iowidth = gen_FlashTable[index].iowidth;
-+ pdevinfo->timmingsetting = gen_FlashTable[index].timmingsetting;
-+ pdevinfo->advancedmode = gen_FlashTable[index].advancedmode;
-+ pdevinfo->pagesize = gen_FlashTable[index].pagesize;
-+ pdevinfo->sparesize = gen_FlashTable[index].sparesize;
-+ pdevinfo->totalsize = gen_FlashTable[index].totalsize;
-+ memcpy(pdevinfo->devciename, gen_FlashTable[index].devciename, sizeof(pdevinfo->devciename));
-+ printk(KERN_INFO "Device found in MTK table, ID: %x, EXT_ID: %x\n", id, ext_id);
-+
-+ goto find;
-+ }
-+ }
-+
-+find:
-+ if (0 == pdevinfo->id) {
-+ printk(KERN_INFO "Device not found, ID: %x\n", id);
-+ return false;
-+ } else {
-+ return true;
-+ }
-+}
-+
-+static void
-+ECC_Config(struct mtk_nand_host_hw *hw,u32 ecc_bit)
-+{
-+ u32 u4ENCODESize;
-+ u32 u4DECODESize;
-+ u32 ecc_bit_cfg = ECC_CNFG_ECC4;
-+
-+ switch(ecc_bit){
-+ case 4:
-+ ecc_bit_cfg = ECC_CNFG_ECC4;
-+ break;
-+ case 8:
-+ ecc_bit_cfg = ECC_CNFG_ECC8;
-+ break;
-+ case 10:
-+ ecc_bit_cfg = ECC_CNFG_ECC10;
-+ break;
-+ case 12:
-+ ecc_bit_cfg = ECC_CNFG_ECC12;
-+ break;
-+ default:
-+ break;
-+ }
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+ do {
-+ } while (!DRV_Reg16(ECC_DECIDLE_REG16));
-+
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+ do {
-+ } while (!DRV_Reg32(ECC_ENCIDLE_REG32));
-+
-+ /* setup FDM register base */
-+ DRV_WriteReg32(ECC_FDMADDR_REG32, NFI_FDM0L_REG32);
-+
-+ /* Sector + FDM */
-+ u4ENCODESize = (hw->nand_sec_size + 8) << 3;
-+ /* Sector + FDM + YAFFS2 meta data bits */
-+ u4DECODESize = ((hw->nand_sec_size + 8) << 3) + ecc_bit * 13;
-+
-+ /* configure ECC decoder && encoder */
-+ DRV_WriteReg32(ECC_DECCNFG_REG32, ecc_bit_cfg | DEC_CNFG_NFI | DEC_CNFG_EMPTY_EN | (u4DECODESize << DEC_CNFG_CODE_SHIFT));
-+
-+ DRV_WriteReg32(ECC_ENCCNFG_REG32, ecc_bit_cfg | ENC_CNFG_NFI | (u4ENCODESize << ENC_CNFG_MSG_SHIFT));
-+ NFI_SET_REG32(ECC_DECCNFG_REG32, DEC_CNFG_EL);
-+}
-+
-+static void
-+ECC_Decode_Start(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_EN);
-+}
-+
-+static void
-+ECC_Decode_End(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+}
-+
-+static void
-+ECC_Encode_Start(void)
-+{
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE))
-+ ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_EN);
-+}
-+
-+static void
-+ECC_Encode_End(void)
-+{
-+ /* wait for device returning idle */
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+}
-+
-+static bool
-+mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u32 u4PageAddr)
-+{
-+ bool bRet = true;
-+ u16 u2SectorDoneMask = 1 << u4SecIndex;
-+ u32 u4ErrorNumDebug, i, u4ErrNum;
-+ u32 timeout = 0xFFFF;
-+ // int el;
-+ u32 au4ErrBitLoc[6];
-+ u32 u4ErrByteLoc, u4BitOffset;
-+ u32 u4ErrBitLoc1th, u4ErrBitLoc2nd;
-+
-+ //4 // Wait for Decode Done
-+ while (0 == (u2SectorDoneMask & DRV_Reg16(ECC_DECDONE_REG16))) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ /* We will manually correct the error bits in the last sector, not all the sectors of the page! */
-+ memset(au4ErrBitLoc, 0x0, sizeof(au4ErrBitLoc));
-+ u4ErrorNumDebug = DRV_Reg32(ECC_DECENUM_REG32);
-+ u4ErrNum = DRV_Reg32(ECC_DECENUM_REG32) >> (u4SecIndex << 2);
-+ u4ErrNum &= 0xF;
-+
-+ if (u4ErrNum) {
-+ if (0xF == u4ErrNum) {
-+ mtd->ecc_stats.failed++;
-+ bRet = false;
-+ //printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr);
-+ } else {
-+ for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
-+ au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
-+ u4ErrBitLoc1th = au4ErrBitLoc[i] & 0x1FFF;
-+ if (u4ErrBitLoc1th < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc1th / 8;
-+ u4BitOffset = u4ErrBitLoc1th % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ }
-+ u4ErrBitLoc2nd = (au4ErrBitLoc[i] >> 16) & 0x1FFF;
-+ if (0 != u4ErrBitLoc2nd) {
-+ if (u4ErrBitLoc2nd < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc2nd / 8;
-+ u4BitOffset = u4ErrBitLoc2nd % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ //printk(KERN_ERR"UnCorrectable High ErrLoc=%d\n", au4ErrBitLoc[i]);
-+ }
-+ }
-+ }
-+ }
-+ if (0 == (DRV_Reg16(ECC_DECFER_REG16) & (1 << u4SecIndex)))
-+ bRet = false;
-+ }
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_RFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+ while (FIFO_RD_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) < u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_WFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while (FIFO_WR_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) > u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_status_ready(u32 u4Status)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while ((DRV_Reg32(NFI_STA_REG32) & u4Status) != 0) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_reset(void)
-+{
-+ int timeout = 0xFFFF;
-+ if (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+ while (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ timeout--;
-+ if (!timeout)
-+ MSG(INIT, "Wait for NFI_MASTERSTA timeout\n");
-+ }
-+ }
-+ /* issue reset operation */
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+
-+ return mtk_nand_status_ready(STA_NFI_FSM_MASK | STA_NAND_BUSY) && mtk_nand_RFIFOValidSize(0) && mtk_nand_WFIFOValidSize(0);
-+}
-+
-+static void
-+mtk_nand_set_mode(u16 u2OpMode)
-+{
-+ u16 u2Mode = DRV_Reg16(NFI_CNFG_REG16);
-+ u2Mode &= ~CNFG_OP_MODE_MASK;
-+ u2Mode |= u2OpMode;
-+ DRV_WriteReg16(NFI_CNFG_REG16, u2Mode);
-+}
-+
-+static void
-+mtk_nand_set_autoformat(bool bEnable)
-+{
-+ if (bEnable)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+}
-+
-+static void
-+mtk_nand_configure_fdm(u16 u2FDMSize)
-+{
-+ NFI_CLN_REG16(NFI_PAGEFMT_REG16, PAGEFMT_FDM_MASK | PAGEFMT_FDM_ECC_MASK);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_SHIFT);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_ECC_SHIFT);
-+}
-+
-+static void
-+mtk_nand_configure_lock(void)
-+{
-+ u32 u4WriteColNOB = 2;
-+ u32 u4WriteRowNOB = 3;
-+ u32 u4EraseColNOB = 0;
-+ u32 u4EraseRowNOB = 3;
-+ DRV_WriteReg16(NFI_LOCKANOB_REG16,
-+ (u4WriteColNOB << PROG_CADD_NOB_SHIFT) | (u4WriteRowNOB << PROG_RADD_NOB_SHIFT) | (u4EraseColNOB << ERASE_CADD_NOB_SHIFT) | (u4EraseRowNOB << ERASE_RADD_NOB_SHIFT));
-+
-+ if (CHIPVER_ECO_1 == g_u4ChipVer) {
-+ int i;
-+ for (i = 0; i < 16; ++i) {
-+ DRV_WriteReg32(NFI_LOCK00ADD_REG32 + (i << 1), 0xFFFFFFFF);
-+ DRV_WriteReg32(NFI_LOCK00FMT_REG32 + (i << 1), 0xFFFFFFFF);
-+ }
-+ //DRV_WriteReg16(NFI_LOCKANOB_REG16, 0x0);
-+ DRV_WriteReg32(NFI_LOCKCON_REG32, 0xFFFFFFFF);
-+ DRV_WriteReg16(NFI_LOCK_REG16, NFI_LOCK_ON);
-+ }
-+}
-+
-+static bool
-+mtk_nand_pio_ready(void)
-+{
-+ int count = 0;
-+ while (!(DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1)) {
-+ count++;
-+ if (count > 0xffff) {
-+ printk("PIO_DIRDY timeout\n");
-+ return false;
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_set_command(u16 command)
-+{
-+ mb();
-+ DRV_WriteReg16(NFI_CMD_REG16, command);
-+ return mtk_nand_status_ready(STA_CMD_STATE);
-+}
-+
-+static bool
-+mtk_nand_set_address(u32 u4ColAddr, u32 u4RowAddr, u16 u2ColNOB, u16 u2RowNOB)
-+{
-+ mb();
-+ DRV_WriteReg32(NFI_COLADDR_REG32, u4ColAddr);
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, u4RowAddr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, u2ColNOB | (u2RowNOB << ADDR_ROW_NOB_SHIFT));
-+ return mtk_nand_status_ready(STA_ADDR_STATE);
-+}
-+
-+static bool
-+mtk_nand_check_RW_count(u16 u2WriteSize)
-+{
-+ u32 timeout = 0xFFFF;
-+ u16 u2SecNum = u2WriteSize >> 9;
-+
-+ while (ADDRCNTR_CNTR(DRV_Reg16(NFI_ADDRCNTR_REG16)) < u2SecNum) {
-+ timeout--;
-+ if (0 == timeout) {
-+ printk(KERN_INFO "[%s] timeout\n", __FUNCTION__);
-+ return false;
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_ready_for_read(struct nand_chip *nand, u32 u4RowAddr, u32 u4ColAddr, bool full, u8 * buf)
-+{
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ bool bRet = false;
-+ u16 sec_num = 1 << (nand->page_shift - 9);
-+ u32 col_addr = u4ColAddr;
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ if (!mtk_nand_reset())
-+ goto cleanup;
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+
-+ mtk_nand_set_mode(CNFG_OP_READ);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Decode_Start();
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto cleanup;
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto cleanup;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_ready_for_write(struct nand_chip *nand, u32 u4RowAddr, u32 col_addr, bool full, u8 * buf)
-+{
-+ bool bRet = false;
-+ u32 sec_num = 1 << (nand->page_shift - 9);
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ if (!mtk_nand_reset())
-+ return false;
-+
-+ mtk_nand_set_mode(CNFG_OP_PRGM);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Encode_Start();
-+
-+ if (!mtk_nand_set_command(NAND_CMD_SEQIN))
-+ goto cleanup;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_check_dececc_done(u32 u4SecNum)
-+{
-+ u32 timeout, dec_mask;
-+
-+ timeout = 0xffff;
-+ dec_mask = (1 << u4SecNum) - 1;
-+ while ((dec_mask != DRV_Reg(ECC_DECDONE_REG16)) && timeout > 0)
-+ timeout--;
-+ if (timeout == 0) {
-+ MSG(VERIFY, "ECC_DECDONE: timeout\n");
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_mcu_read_data(u8 * buf, u32 length)
-+{
-+ int timeout = 0xffff;
-+ u32 i;
-+ u32 *buf32 = (u32 *) buf;
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ //DRV_WriteReg32(NFI_STRADDR_REG32, 0);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf++ = (u8) DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf32++ = DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_read_page_data(struct mtd_info *mtd, u8 * pDataBuf, u32 u4Size)
-+{
-+ return mtk_nand_mcu_read_data(pDataBuf, u4Size);
-+}
-+
-+static bool
-+mtk_nand_mcu_write_data(struct mtd_info *mtd, const u8 * buf, u32 length)
-+{
-+ u32 timeout = 0xFFFF;
-+ u32 i;
-+ u32 *pBuf32;
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ pBuf32 = (u32 *) buf;
-+
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *buf++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *pBuf32++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_write_page_data(struct mtd_info *mtd, u8 * buf, u32 size)
-+{
-+ return mtk_nand_mcu_write_data(mtd, buf, size);
-+}
-+
-+static void
-+mtk_nand_read_fdm_data(u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i;
-+ u32 *pBuf32 = (u32 *) pDataBuf;
-+
-+ if (pBuf32) {
-+ for (i = 0; i < u4SecNum; ++i) {
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0L_REG32 + (i << 1));
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0M_REG32 + (i << 1));
-+ }
-+ }
-+}
-+
-+static u8 fdm_buf[64];
-+static void
-+mtk_nand_write_fdm_data(struct nand_chip *chip, u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i, j;
-+ u8 checksum = 0;
-+ bool empty = true;
-+ struct nand_oobfree *free_entry;
-+ u32 *pBuf32;
-+
-+ memcpy(fdm_buf, pDataBuf, u4SecNum * 8);
-+
-+ free_entry = chip->ecc.layout->oobfree;
-+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free_entry[i].length; i++) {
-+ for (j = 0; j < free_entry[i].length; j++) {
-+ if (pDataBuf[free_entry[i].offset + j] != 0xFF)
-+ empty = false;
-+ checksum ^= pDataBuf[free_entry[i].offset + j];
-+ }
-+ }
-+
-+ if (!empty) {
-+ fdm_buf[free_entry[i - 1].offset + free_entry[i - 1].length] = checksum;
-+ }
-+
-+ pBuf32 = (u32 *) fdm_buf;
-+ for (i = 0; i < u4SecNum; ++i) {
-+ DRV_WriteReg32(NFI_FDM0L_REG32 + (i << 1), *pBuf32++);
-+ DRV_WriteReg32(NFI_FDM0M_REG32 + (i << 1), *pBuf32++);
-+ }
-+}
-+
-+static void
-+mtk_nand_stop_read(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ mtk_nand_reset();
-+ if (g_bHwEcc)
-+ ECC_Decode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+static void
-+mtk_nand_stop_write(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ if (g_bHwEcc)
-+ ECC_Encode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+bool
-+mtk_nand_exec_read_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ u8 *buf;
-+ bool bRet = true;
-+ struct nand_chip *nand = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+
-+ if (((u32) pPageBuf % 16) && local_buffer_16_align)
-+ buf = local_buffer_16_align;
-+ else
-+ buf = pPageBuf;
-+ if (mtk_nand_ready_for_read(nand, u4RowAddr, 0, true, buf)) {
-+ int j;
-+ for (j = 0 ; j < u4SecNum; j++) {
-+ if (!mtk_nand_read_page_data(mtd, buf+j*512, 512))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_dececc_done(j+1))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_bch_error(mtd, buf+j*512, j, u4RowAddr))
-+ bRet = false;
-+ }
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ bRet = false;
-+
-+ mtk_nand_read_fdm_data(pFDMBuf, u4SecNum);
-+ mtk_nand_stop_read();
-+ }
-+
-+ if (buf == local_buffer_16_align)
-+ memcpy(pPageBuf, buf, u4PageSize);
-+
-+ return bRet;
-+}
-+
-+int
-+mtk_nand_exec_write_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+ u8 *buf;
-+ u8 status;
-+
-+ MSG(WRITE, "mtk_nand_exec_write_page, page: 0x%x\n", u4RowAddr);
-+
-+ if (((u32) pPageBuf % 16) && local_buffer_16_align) {
-+ printk(KERN_INFO "Data buffer not 16 bytes aligned: %p\n", pPageBuf);
-+ memcpy(local_buffer_16_align, pPageBuf, mtd->writesize);
-+ buf = local_buffer_16_align;
-+ } else
-+ buf = pPageBuf;
-+
-+ if (mtk_nand_ready_for_write(chip, u4RowAddr, 0, true, buf)) {
-+ mtk_nand_write_fdm_data(chip, pFDMBuf, u4SecNum);
-+ (void)mtk_nand_write_page_data(mtd, buf, u4PageSize);
-+ (void)mtk_nand_check_RW_count(u4PageSize);
-+ mtk_nand_stop_write();
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ;
-+ }
-+
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL)
-+ return -EIO;
-+ return 0;
-+}
-+
-+static int
-+get_start_end_block(struct mtd_info *mtd, int block, int *start_blk, int *end_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+
-+ *start_blk = 0;
-+ for (i = 0; i <= part_num; i++)
-+ {
-+ if (i == part_num)
-+ {
-+ // try the last reset partition
-+ *end_blk = (chip->chipsize >> chip->phys_erase_shift) - 1;
-+ if (*start_blk <= *end_blk)
-+ {
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ }
-+ }
-+ // skip All partition entry
-+ else if (g_pasStatic_Partition[i].size == MTDPART_SIZ_FULL)
-+ {
-+ continue;
-+ }
-+ *end_blk = *start_blk + (g_pasStatic_Partition[i].size >> chip->phys_erase_shift) - 1;
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ *start_blk = *end_blk + 1;
-+ }
-+ if (*start_blk > *end_blk)
-+ {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static int
-+block_remap(struct mtd_info *mtd, int block)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int start_blk, end_blk;
-+ int j, block_offset;
-+ int bad_block = 0;
-+
-+ if (chip->bbt == NULL) {
-+ printk("ERROR!! no bbt table for block_remap\n");
-+ return -1;
-+ }
-+
-+ if (get_start_end_block(mtd, block, &start_blk, &end_blk) < 0) {
-+ printk("ERROR!! can not find start_blk and end_blk\n");
-+ return -1;
-+ }
-+
-+ block_offset = block - start_blk;
-+ for (j = start_blk; j <= end_blk;j++) {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) == 0x0) {
-+ if (!block_offset)
-+ break;
-+ block_offset--;
-+ } else {
-+ bad_block++;
-+ }
-+ }
-+ if (j <= end_blk) {
-+ return j;
-+ } else {
-+ // remap to the bad block
-+ for (j = end_blk; bad_block > 0; j--)
-+ {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) != 0x0)
-+ {
-+ bad_block--;
-+ if (bad_block <= block_offset)
-+ return j;
-+ }
-+ }
-+ }
-+
-+ printk("Error!! block_remap error\n");
-+ return -1;
-+}
-+
-+int
-+check_block_remap(struct mtd_info *mtd, int block)
-+{
-+ if (shift_on_bbt)
-+ return block_remap(mtd, block);
-+ else
-+ return block;
-+}
-+EXPORT_SYMBOL(check_block_remap);
-+
-+
-+static int
-+write_next_on_fail(struct mtd_info *mtd, char *write_buf, int page, int * to_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i, j, to_page = 0, first_page;
-+ char *buf, *oob;
-+ int start_blk = 0, end_blk;
-+ int mapped_block;
-+ int page_per_block_bit = chip->phys_erase_shift - chip->page_shift;
-+ int block = page >> page_per_block_bit;
-+
-+ // find next available block in the same MTD partition
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+
-+ get_start_end_block(mtd, block, &start_blk, &end_blk);
-+
-+ buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL | GFP_DMA);
-+ if (buf == NULL)
-+ return -1;
-+
-+ oob = buf + mtd->writesize;
-+ for ((*to_blk) = block + 1; (*to_blk) <= end_blk ; (*to_blk)++) {
-+ if (nand_bbt_get(mtd, (*to_blk) << page_per_block_bit) == 0) {
-+ int status;
-+ status = mtk_nand_erase_hw(mtd, (*to_blk) << page_per_block_bit);
-+ if (status & NAND_STATUS_FAIL) {
-+ mtk_nand_block_markbad_hw(mtd, (*to_blk) << chip->phys_erase_shift);
-+ nand_bbt_set(mtd, (*to_blk) << page_per_block_bit, 0x3);
-+ } else {
-+ /* good block */
-+ to_page = (*to_blk) << page_per_block_bit;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!to_page) {
-+ kfree(buf);
-+ return -1;
-+ }
-+
-+ first_page = (page >> page_per_block_bit) << page_per_block_bit;
-+ for (i = 0; i < (1 << page_per_block_bit); i++) {
-+ if ((first_page + i) != page) {
-+ mtk_nand_read_oob_hw(mtd, chip, (first_page+i));
-+ for (j = 0; j < mtd->oobsize; j++)
-+ if (chip->oob_poi[j] != (unsigned char)0xff)
-+ break;
-+ if (j < mtd->oobsize) {
-+ mtk_nand_exec_read_page(mtd, (first_page+i), mtd->writesize, buf, oob);
-+ memset(oob, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)buf, oob) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ } else {
-+ memset(chip->oob_poi, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)write_buf, chip->oob_poi) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, write_buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ }
-+
-+ kfree(buf);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset,
-+ int data_len, const u8 * buf, int oob_required, int page, int cached, int raw)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_exec_write_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, (u8 *)buf, chip->oob_poi)) {
-+ MSG(INIT, "write fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, UPDATE_WRITE_FAIL, (u8 *) buf, chip->oob_poi)) {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ {
-+ int new_blk;
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (write_next_on_fail(mtd, (char *)buf, page_in_block + mapped_block * page_per_block, &new_blk) != 0)
-+ {
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ return NAND_STATUS_FAIL;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ break;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static void
-+mtk_nand_command_bp(struct mtd_info *mtd, unsigned int command, int column, int page_addr)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+
-+ switch (command) {
-+ case NAND_CMD_SEQIN:
-+ memset(g_kCMD.au1OOB, 0xFF, sizeof(g_kCMD.au1OOB));
-+ g_kCMD.pDataBuf = NULL;
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_PAGEPROG:
-+ if (g_kCMD.pDataBuf || (0xFF != g_kCMD.au1OOB[nand_badblock_offset])) {
-+ u8 *pDataBuf = g_kCMD.pDataBuf ? g_kCMD.pDataBuf : nand->buffers->databuf;
-+ mtk_nand_exec_write_page(mtd, g_kCMD.u4RowAddr, mtd->writesize, pDataBuf, g_kCMD.au1OOB);
-+ g_kCMD.u4RowAddr = (u32) - 1;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+ }
-+ break;
-+
-+ case NAND_CMD_READOOB:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column + mtd->writesize;
-+ break;
-+
-+ case NAND_CMD_READ0:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_ERASE1:
-+ nand->state=FL_ERASING;
-+ (void)mtk_nand_reset();
-+ mtk_nand_set_mode(CNFG_OP_ERASE);
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE1);
-+ (void)mtk_nand_set_address(0, page_addr, 0, devinfo.addr_cycle - 2);
-+ break;
-+
-+ case NAND_CMD_ERASE2:
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE2);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ break;
-+
-+ case NAND_CMD_STATUS:
-+ (void)mtk_nand_reset();
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ mtk_nand_set_mode(CNFG_READ_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_STATUS);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD | (1 << CON_NFI_NOB_SHIFT));
-+ g_bcmdstatus = true;
-+ break;
-+
-+ case NAND_CMD_RESET:
-+ (void)mtk_nand_reset();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, INTR_RST_DONE_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_RESET);
-+ DRV_WriteReg16(NFI_BASE+0x44, 0xF1);
-+ while(!(DRV_Reg16(NFI_INTR_REG16)&INTR_RST_DONE_EN))
-+ ;
-+ break;
-+
-+ case NAND_CMD_READID:
-+ mtk_nand_reset();
-+ /* Disable HW ECC */
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN | CNFG_BYTE_RW);
-+ (void)mtk_nand_reset();
-+ mb();
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ (void)mtk_nand_set_command(NAND_CMD_READID);
-+ (void)mtk_nand_set_address(0, 0, 1, 0);
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_DATAR_STATE)
-+ ;
-+ break;
-+
-+ default:
-+ BUG();
-+ break;
-+ }
-+}
-+
-+static void
-+mtk_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ if ((chip == -1) && (false == g_bInitDone)) {
-+ struct nand_chip *nand = mtd->priv;
-+ struct mtk_nand_host *host = nand->priv;
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 spare_per_sector = mtd->oobsize / (mtd->writesize / 512);
-+ u32 ecc_bit = 4;
-+ u32 spare_bit = PAGEFMT_SPARE_16;
-+
-+ if (spare_per_sector >= 28) {
-+ spare_bit = PAGEFMT_SPARE_28;
-+ ecc_bit = 12;
-+ spare_per_sector = 28;
-+ } else if (spare_per_sector >= 27) {
-+ spare_bit = PAGEFMT_SPARE_27;
-+ ecc_bit = 8;
-+ spare_per_sector = 27;
-+ } else if (spare_per_sector >= 26) {
-+ spare_bit = PAGEFMT_SPARE_26;
-+ ecc_bit = 8;
-+ spare_per_sector = 26;
-+ } else if (spare_per_sector >= 16) {
-+ spare_bit = PAGEFMT_SPARE_16;
-+ ecc_bit = 4;
-+ spare_per_sector = 16;
-+ } else {
-+ MSG(INIT, "[NAND]: NFI not support oobsize: %x\n", spare_per_sector);
-+ ASSERT(0);
-+ }
-+ mtd->oobsize = spare_per_sector*(mtd->writesize/512);
-+ MSG(INIT, "[NAND]select ecc bit:%d, sparesize :%d spare_per_sector=%d\n",ecc_bit,mtd->oobsize,spare_per_sector);
-+ /* Setup PageFormat */
-+ if (4096 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_4K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ } else if (2048 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_2K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ }
-+ ECC_Config(hw,ecc_bit);
-+ g_bInitDone = true;
-+ }
-+ switch (chip) {
-+ case -1:
-+ break;
-+ case 0:
-+ case 1:
-+ /* Jun Shen, 2011.04.13 */
-+ /* Note: MT6577 EVB NAND is mounted on CS0, but FPGA is CS1 */
-+ DRV_WriteReg16(NFI_CSEL_REG16, chip);
-+ /* Jun Shen, 2011.04.13 */
-+ break;
-+ }
-+}
-+
-+static uint8_t
-+mtk_nand_read_byte(struct mtd_info *mtd)
-+{
-+ uint8_t retval = 0;
-+
-+ if (!mtk_nand_pio_ready()) {
-+ printk("pio ready timeout\n");
-+ retval = false;
-+ }
-+
-+ if (g_bcmdstatus) {
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mtk_nand_reset();
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+ g_bcmdstatus = false;
-+ } else
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+
-+ return retval;
-+}
-+
-+static void
-+mtk_nand_read_buf(struct mtd_info *mtd, uint8_t * buf, int len)
-+{
-+ struct nand_chip *nand = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr < u4PageSize) {
-+ if ((u4ColAddr == 0) && (len >= u4PageSize)) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, pkCMD->au1OOB);
-+ if (len > u4PageSize) {
-+ u32 u4Size = min(len - u4PageSize, sizeof(pkCMD->au1OOB));
-+ memcpy(buf + u4PageSize, pkCMD->au1OOB, u4Size);
-+ }
-+ } else {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ memcpy(buf, nand->buffers->databuf + u4ColAddr, len);
-+ }
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ } else {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u32 u4Size = min(len - u4Offset, sizeof(pkCMD->au1OOB));
-+ if (pkCMD->u4OOBRowAddr != pkCMD->u4RowAddr) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ }
-+ memcpy(buf, pkCMD->au1OOB + u4Offset, u4Size);
-+ }
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static void
-+mtk_nand_write_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+ int i4Size, i;
-+
-+ if (u4ColAddr >= u4PageSize) {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u8 *pOOB = pkCMD->au1OOB + u4Offset;
-+ i4Size = min(len, (int)(sizeof(pkCMD->au1OOB) - u4Offset));
-+ for (i = 0; i < i4Size; i++) {
-+ pOOB[i] &= buf[i];
-+ }
-+ } else {
-+ pkCMD->pDataBuf = (u8 *) buf;
-+ }
-+
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static int
-+mtk_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t * buf, int oob_required)
-+{
-+ mtk_nand_write_buf(mtd, buf, mtd->writesize);
-+ mtk_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, int oob_required, int page)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr == 0) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, chip->oob_poi);
-+ pkCMD->u4ColAddr += u4PageSize + mtd->oobsize;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 * buf, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block,
-+ mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+ else
-+ return -EIO;
-+#endif
-+}
-+
-+int
-+mtk_nand_erase_hw(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+
-+ chip->erase_cmd(mtd, page);
-+
-+ return chip->waitfunc(mtd, chip);
-+}
-+
-+static int
-+mtk_nand_erase(struct mtd_info *mtd, int page)
-+{
-+ // get mapping
-+ struct nand_chip *chip = mtd->priv;
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int page_in_block = page % page_per_block;
-+ int block = page / page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+
-+ do {
-+ int status = mtk_nand_erase_hw(mtd, page_in_block + page_per_block * mapped_block);
-+
-+ if (status & NAND_STATUS_FAIL) {
-+#if defined (MTK_NAND_BMT)
-+ if (update_bmt( (page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_ERASE_FAIL, NULL, NULL))
-+ {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT success\n", mapped_block);
-+ return 0;
-+ } else {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT fail\n", mapped_block);
-+ return NAND_STATUS_FAIL;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else
-+ return NAND_STATUS_FAIL;
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob_raw(struct mtd_info *mtd, uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int res = 0;
-+ u32 colnob = 2, rawnob = devinfo.addr_cycle - 2;
-+ int randomread = 0;
-+ int read_len = 0;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+ if (len > spare_per_sector)
-+ randomread = 1;
-+ if (!randomread || !(devinfo.advancedmode & RAMDOM_READ)) {
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); // TODO: Fix this hard-code 16
-+ if (!mtk_nand_ready_for_read(chip, page_addr, col_addr, false, NULL)) {
-+ printk(KERN_WARNING "mtk_nand_ready_for_read return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_check_RW_count(read_len);
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ } else {
-+ col_addr = NAND_SECTOR_SIZE;
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ if (!mtk_nand_reset())
-+ goto error;
-+ mtk_nand_set_mode(0x6000);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+
-+ mtk_nand_set_autoformat(false);
-+
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto error;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, page_addr, colnob, rawnob))
-+ goto error;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ sector++;
-+ len -= read_len;
-+ mtk_nand_stop_read();
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_set_command(0x05))
-+ goto error;
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector);
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, 2);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+ if (!mtk_nand_status_ready(STA_ADDR_STATE))
-+ goto error;
-+ if (!mtk_nand_set_command(0xE0))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ }
-+error:
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ return res;
-+}
-+
-+static int
-+mtk_nand_write_oob_raw(struct mtd_info *mtd, const uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int write_len = 0;
-+ int status;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+
-+ while (len > 0) {
-+ write_len = min(len, spare_per_sector);
-+ col_addr = sector * (NAND_SECTOR_SIZE + spare_per_sector) + NAND_SECTOR_SIZE;
-+ if (!mtk_nand_ready_for_write(chip, page_addr, col_addr, false, NULL))
-+ return -EIO;
-+ if (!mtk_nand_mcu_write_data(mtd, buf + sector * spare_per_sector, write_len))
-+ return -EIO;
-+ (void)mtk_nand_check_RW_count(write_len);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk(KERN_INFO "status: %d\n", status);
-+ return -EIO;
-+ }
-+ len -= write_len;
-+ sector++;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i, iter;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+
-+ // copy ecc data
-+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ local_oob_buf[iter] = chip->oob_poi[chip->ecc.layout->eccpos[i]];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++)
-+ memcpy(&local_oob_buf[i * spare_per_sector], &chip->oob_poi[i * OOB_AVAI_PER_SECTOR], OOB_AVAI_PER_SECTOR);
-+
-+ return mtk_nand_write_oob_raw(mtd, local_oob_buf, page, mtd->oobsize);
-+}
-+
-+static int mtk_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt)
-+ {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_write_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block /* page */)) {
-+ MSG(INIT, "write oob fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_WRITE_FAIL, NULL, chip->oob_poi))
-+ {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, mapped_block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else {
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int page = block * (1 << (chip->phys_erase_shift - chip->page_shift));
-+ u8 buf[8];
-+
-+ memset(buf, 0xFF, 8);
-+ buf[0] = 0;
-+ return mtk_nand_write_oob_raw(mtd, buf, page, 8);
-+}
-+
-+static int
-+mtk_nand_block_markbad(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int ret;
-+ int mapped_block = block;
-+
-+ nand_get_device(chip, mtd, FL_WRITING);
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1) {
-+ printk("NAND mark bad failed\n");
-+ nand_release_device(mtd);
-+ return NAND_STATUS_FAIL;
-+ }
-+ }
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#endif
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+
-+int
-+mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i;
-+ u8 iter = 0;
-+
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (mtk_nand_read_oob_raw(mtd, chip->oob_poi, page, mtd->oobsize)) {
-+ printk(KERN_ERR "[%s]mtk_nand_read_oob_raw return failed\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ // adjust to ecc physical layout to memory layout
-+ /*********************************************************/
-+ /* FDM0 | ECC0 | FDM1 | ECC1 | FDM2 | ECC2 | FDM3 | ECC3 */
-+ /* 8B | 8B | 8B | 8B | 8B | 8B | 8B | 8B */
-+ /*********************************************************/
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+ // copy ecc data
-+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ chip->oob_poi[chip->ecc.layout->eccpos[i]] = local_oob_buf[iter];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++) {
-+ memcpy(&chip->oob_poi[i * OOB_AVAI_PER_SECTOR], &local_oob_buf[i * spare_per_sector], OOB_AVAI_PER_SECTOR);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ // allow to read oob even if the block is bad
-+ }
-+ if (mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block)!=0)
-+ return -1;
-+#endif
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int page_addr = (int)(ofs >> chip->page_shift);
-+ unsigned int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ unsigned char oob_buf[8];
-+
-+ page_addr &= ~(page_per_block - 1);
-+ if (mtk_nand_read_oob_raw(mtd, oob_buf, page_addr, sizeof(oob_buf))) {
-+ printk(KERN_WARNING "mtk_nand_read_oob_raw return error\n");
-+ return 1;
-+ }
-+
-+ if (oob_buf[0] != 0xff) {
-+ printk(KERN_WARNING "Bad block detected at 0x%x, oob_buf[0] is 0x%x\n", page_addr, oob_buf[0]);
-+ // dump_nfi();
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+ int chipnr = 0;
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int block = (int)ofs >> chip->phys_erase_shift;
-+ int mapped_block = block;
-+ int ret;
-+
-+ if (getchip) {
-+ chipnr = (int)(ofs >> chip->chip_shift);
-+ nand_get_device(chip, mtd, FL_READING);
-+ /* Select the NAND device */
-+ chip->select_chip(mtd, chipnr);
-+ }
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1) {
-+ if (getchip)
-+ nand_release_device(mtd);
-+ return NAND_STATUS_FAIL;
-+ }
-+ }
-+#endif
-+
-+ ret = mtk_nand_block_bad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#if defined (MTK_NAND_BMT)
-+ if (ret) {
-+ MSG(INIT, "Unmapped bad block: 0x%x\n", mapped_block);
-+ if (update_bmt(mapped_block << chip->phys_erase_shift, UPDATE_UNMAPPED_BLOCK, NULL, NULL)) {
-+ MSG(INIT, "Update BMT success\n");
-+ ret = 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ ret = 1;
-+ }
-+ }
-+#endif
-+
-+ if (getchip)
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+char gacBuf[4096 + 288];
-+
-+static int
-+mtk_nand_verify_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4PageSize = mtd->writesize;
-+ u32 *pSrc, *pDst;
-+ int i;
-+
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, gacBuf, gacBuf + u4PageSize);
-+
-+ pSrc = (u32 *) buf;
-+ pDst = (u32 *) gacBuf;
-+ len = len / sizeof(u32);
-+ for (i = 0; i < len; ++i) {
-+ if (*pSrc != *pDst) {
-+ MSG(VERIFY, "mtk_nand_verify_buf page fail at page %d\n", pkCMD->u4RowAddr);
-+ return -1;
-+ }
-+ pSrc++;
-+ pDst++;
-+ }
-+
-+ pSrc = (u32 *) chip->oob_poi;
-+ pDst = (u32 *) (gacBuf + u4PageSize);
-+
-+ if ((pSrc[0] != pDst[0]) || (pSrc[1] != pDst[1]) || (pSrc[2] != pDst[2]) || (pSrc[3] != pDst[3]) || (pSrc[4] != pDst[4]) || (pSrc[5] != pDst[5])) {
-+ // TODO: Ask Designer Why?
-+ //(pSrc[6] != pDst[6]) || (pSrc[7] != pDst[7]))
-+ MSG(VERIFY, "mtk_nand_verify_buf oob fail at page %d\n", pkCMD->u4RowAddr);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pSrc[0], pSrc[1], pSrc[2], pSrc[3], pSrc[4], pSrc[5], pSrc[6], pSrc[7]);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pDst[0], pDst[1], pDst[2], pDst[3], pDst[4], pDst[5], pDst[6], pDst[7]);
-+ return -1;
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static void
-+mtk_nand_init_hw(struct mtk_nand_host *host) {
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ MSG(INIT, "Enable NFI Clock\n");
-+ nand_enable_clock();
-+
-+ g_bInitDone = false;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+
-+ /* Set default NFI access timing control */
-+ DRV_WriteReg32(NFI_ACCCON_REG32, hw->nfi_access_timing);
-+ DRV_WriteReg16(NFI_CNFG_REG16, 0);
-+ DRV_WriteReg16(NFI_PAGEFMT_REG16, 0);
-+
-+ /* Reset the state machine and data FIFO, because flushing FIFO */
-+ (void)mtk_nand_reset();
-+
-+ /* Set the ECC engine */
-+ if (hw->nand_ecc_mode == NAND_ECC_HW) {
-+ MSG(INIT, "%s : Use HW ECC\n", MODULE_NAME);
-+ if (g_bHwEcc)
-+ NFI_SET_REG32(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ ECC_Config(host->hw,4);
-+ mtk_nand_configure_fdm(8);
-+ mtk_nand_configure_lock();
-+ }
-+
-+ NFI_SET_REG16(NFI_IOCON_REG16, 0x47);
-+}
-+
-+static int mtk_nand_dev_ready(struct mtd_info *mtd)
-+{
-+ return !(DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY);
-+}
-+
-+#define FACT_BBT_BLOCK_NUM 32 // use the latest 32 BLOCK for factory bbt table
-+#define FACT_BBT_OOB_SIGNATURE 1
-+#define FACT_BBT_SIGNATURE_LEN 7
-+const u8 oob_signature[] = "mtknand";
-+static u8 *fact_bbt = 0;
-+static u32 bbt_size = 0;
-+
-+static int
-+read_fact_bbt(struct mtd_info *mtd, unsigned int page)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ // read oob
-+ if (mtk_nand_read_oob_hw(mtd, chip, page)==0)
-+ {
-+ if (chip->oob_poi[nand_badblock_offset] != 0xFF)
-+ {
-+ printk("Bad Block on Page %x\n", page);
-+ return -1;
-+ }
-+ if (memcmp(&chip->oob_poi[FACT_BBT_OOB_SIGNATURE], oob_signature, FACT_BBT_SIGNATURE_LEN) != 0)
-+ {
-+ printk("compare signature failed %x\n", page);
-+ return -1;
-+ }
-+ if (mtk_nand_exec_read_page(mtd, page, mtd->writesize, chip->buffers->databuf, chip->oob_poi))
-+ {
-+ printk("Signature matched and data read!\n");
-+ memcpy(fact_bbt, chip->buffers->databuf, (bbt_size <= mtd->writesize)? bbt_size:mtd->writesize);
-+ return 0;
-+ }
-+
-+ }
-+ printk("failed at page %x\n", page);
-+ return -1;
-+}
-+
-+static int
-+load_fact_bbt(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+ u32 total_block;
-+
-+ total_block = 1 << (chip->chip_shift - chip->phys_erase_shift);
-+ bbt_size = total_block >> 2;
-+
-+ if ((!fact_bbt) && (bbt_size))
-+ fact_bbt = (u8 *)kmalloc(bbt_size, GFP_KERNEL);
-+ if (!fact_bbt)
-+ return -1;
-+
-+ for (i = total_block - 1; i >= (total_block - FACT_BBT_BLOCK_NUM); i--)
-+ {
-+ if (read_fact_bbt(mtd, i << (chip->phys_erase_shift - chip->page_shift)) == 0)
-+ {
-+ printk("load_fact_bbt success %d\n", i);
-+ return 0;
-+ }
-+
-+ }
-+ printk("load_fact_bbt failed\n");
-+ return -1;
-+}
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+ struct mtd_part_parser_data ppdata;
-+ struct mtk_nand_host_hw *hw;
-+ struct mtd_info *mtd;
-+ struct nand_chip *nand_chip;
-+ u8 ext_id1, ext_id2, ext_id3;
-+ int err = 0;
-+ int id;
-+ u32 ext_id;
-+ int i;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ hw = &mt7621_nand_hw,
-+ BUG_ON(!hw);
-+ /* Allocate memory for the device structure (and zero it) */
-+ host = kzalloc(sizeof(struct mtk_nand_host), GFP_KERNEL);
-+ if (!host) {
-+ MSG(INIT, "mtk_nand: failed to allocate device structure.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Allocate memory for 16 byte aligned buffer */
-+ local_buffer_16_align = local_buffer + 16 - ((u32) local_buffer % 16);
-+ printk(KERN_INFO "Allocate 16 byte aligned buffer: %p\n", local_buffer_16_align);
-+ host->hw = hw;
-+
-+ /* init mtd data structure */
-+ nand_chip = &host->nand_chip;
-+ nand_chip->priv = host; /* link the private data structures */
-+
-+ mtd = &host->mtd;
-+ mtd->priv = nand_chip;
-+ mtd->owner = THIS_MODULE;
-+ mtd->name = "MT7621-NAND";
-+
-+ hw->nand_ecc_mode = NAND_ECC_HW;
-+
-+ /* Set address of NAND IO lines */
-+ nand_chip->IO_ADDR_R = (void __iomem *)NFI_DATAR_REG32;
-+ nand_chip->IO_ADDR_W = (void __iomem *)NFI_DATAW_REG32;
-+ nand_chip->chip_delay = 20; /* 20us command delay time */
-+ nand_chip->ecc.mode = hw->nand_ecc_mode; /* enable ECC */
-+ nand_chip->ecc.strength = 1;
-+ nand_chip->read_byte = mtk_nand_read_byte;
-+ nand_chip->read_buf = mtk_nand_read_buf;
-+ nand_chip->write_buf = mtk_nand_write_buf;
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ nand_chip->verify_buf = mtk_nand_verify_buf;
-+#endif
-+ nand_chip->select_chip = mtk_nand_select_chip;
-+ nand_chip->dev_ready = mtk_nand_dev_ready;
-+ nand_chip->cmdfunc = mtk_nand_command_bp;
-+ nand_chip->ecc.read_page = mtk_nand_read_page_hwecc;
-+ nand_chip->ecc.write_page = mtk_nand_write_page_hwecc;
-+
-+ nand_chip->ecc.layout = &nand_oob_64;
-+ nand_chip->ecc.size = hw->nand_ecc_size; //2048
-+ nand_chip->ecc.bytes = hw->nand_ecc_bytes; //32
-+
-+ // For BMT, we need to revise driver architecture
-+ nand_chip->write_page = mtk_nand_write_page;
-+ nand_chip->ecc.write_oob = mtk_nand_write_oob;
-+ nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
-+ // nand_chip->erase = mtk_nand_erase;
-+ // nand_chip->read_page = mtk_nand_read_page;
-+ nand_chip->ecc.read_oob = mtk_nand_read_oob;
-+ nand_chip->block_bad = mtk_nand_block_bad;
-+
-+ //Qwert:Add for Uboot
-+ mtk_nand_init_hw(host);
-+ /* Select the device */
-+ nand_chip->select_chip(mtd, NFI_DEFAULT_CS);
-+
-+ /*
-+ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
-+ * after power-up
-+ */
-+ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+
-+ /* Send the command for reading device ID */
-+
-+ nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-+
-+ /* Read manufacturer and device IDs */
-+ manu_id = nand_chip->read_byte(mtd);
-+ dev_id = nand_chip->read_byte(mtd);
-+ id = dev_id | (manu_id << 8);
-+ ext_id1 = nand_chip->read_byte(mtd);
-+ ext_id2 = nand_chip->read_byte(mtd);
-+ ext_id3 = nand_chip->read_byte(mtd);
-+ ext_id = ext_id1 << 16 | ext_id2 << 8 | ext_id3;
-+ if (!get_device_info(id, ext_id, &devinfo)) {
-+ u32 chip_mode = RALINK_REG(RALINK_SYSCTL_BASE+0x010)&0x0F;
-+ MSG(INIT, "Not Support this Device! \r\n");
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+ MSG(INIT, "chip_mode=%08X\n",chip_mode);
-+
-+ /* apply bootstrap first */
-+ devinfo.addr_cycle = 5;
-+ devinfo.iowidth = 8;
-+
-+ switch (chip_mode) {
-+ case 10:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ case 11:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 1024;
-+ devinfo.blocksize = 256;
-+ break;
-+ case 12:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 224;
-+ devinfo.totalsize = 2048;
-+ devinfo.blocksize = 512;
-+ break;
-+ default:
-+ case 1:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 64;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ }
-+
-+ devinfo.timmingsetting = NFI_DEFAULT_ACCESS_TIMING;
-+ devinfo.devciename[0] = 'U';
-+ devinfo.advancedmode = 0;
-+ }
-+ mtd->writesize = devinfo.pagesize;
-+ mtd->erasesize = (devinfo.blocksize<<10);
-+ mtd->oobsize = devinfo.sparesize;
-+
-+ nand_chip->chipsize = (devinfo.totalsize<<20);
-+ nand_chip->page_shift = ffs(mtd->writesize) - 1;
-+ nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
-+ nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
-+ nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
-+ nand_chip->badblockpos = 0;
-+
-+ if (devinfo.pagesize == 4096)
-+ nand_chip->ecc.layout = &nand_oob_128;
-+ else if (devinfo.pagesize == 2048)
-+ nand_chip->ecc.layout = &nand_oob_64;
-+ else if (devinfo.pagesize == 512)
-+ nand_chip->ecc.layout = &nand_oob_16;
-+
-+ nand_chip->ecc.layout->eccbytes = devinfo.sparesize-OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE);
-+ for (i = 0; i < nand_chip->ecc.layout->eccbytes; i++)
-+ nand_chip->ecc.layout->eccpos[i]=OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE)+i;
-+
-+ MSG(INIT, "Support this Device in MTK table! %x \r\n", id);
-+ hw->nfi_bus_width = devinfo.iowidth;
-+ DRV_WriteReg32(NFI_ACCCON_REG32, devinfo.timmingsetting);
-+
-+ /* 16-bit bus width */
-+ if (hw->nfi_bus_width == 16) {
-+ MSG(INIT, "%s : Set the 16-bit I/O settings!\n", MODULE_NAME);
-+ nand_chip->options |= NAND_BUSWIDTH_16;
-+ }
-+ mtd->oobsize = devinfo.sparesize;
-+ hw->nfi_cs_num = 1;
-+
-+ /* Scan to find existance of the device */
-+ if (nand_scan(mtd, hw->nfi_cs_num)) {
-+ MSG(INIT, "%s : nand_scan fail.\n", MODULE_NAME);
-+ err = -ENXIO;
-+ goto out;
-+ }
-+
-+ g_page_size = mtd->writesize;
-+ platform_set_drvdata(pdev, host);
-+ if (hw->nfi_bus_width == 16) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, PAGEFMT_DBYTE_EN);
-+ }
-+
-+ nand_chip->select_chip(mtd, 0);
-+#if defined(MTK_NAND_BMT)
-+ nand_chip->chipsize -= (BMT_POOL_SIZE) << nand_chip->phys_erase_shift;
-+#endif
-+ mtd->size = nand_chip->chipsize;
-+
-+ CFG_BLOCKSIZE = mtd->erasesize;
-+
-+#if defined(MTK_NAND_BMT)
-+ if (!g_bmt) {
-+ if (!(g_bmt = init_bmt(nand_chip, BMT_POOL_SIZE))) {
-+ MSG(INIT, "Error: init bmt failed\n");
-+ return 0;
-+ }
-+ }
-+#endif
-+
-+ ppdata.of_node = pdev->dev.of_node;
-+ err = mtd_device_parse_register(mtd, probe_types, &ppdata,
-+ NULL, 0);
-+ if (!err) {
-+ MSG(INIT, "[mtk_nand] probe successfully!\n");
-+ nand_disable_clock();
-+ shift_on_bbt = 1;
-+ if (load_fact_bbt(mtd) == 0) {
-+ int i;
-+ for (i = 0; i < 0x100; i++)
-+ nand_chip->bbt[i] |= fact_bbt[i];
-+ }
-+
-+ return err;
-+ }
-+
-+out:
-+ MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
-+ nand_release(mtd);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(host);
-+ nand_disable_clock();
-+ return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+ struct mtk_nand_host *host = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &host->mtd;
-+
-+ nand_release(mtd);
-+ kfree(host);
-+ nand_disable_clock();
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_nand_match[] = {
-+ { .compatible = "mtk,mt7621-nand" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+ .probe = mtk_nand_probe,
-+ .remove = mtk_nand_remove,
-+ .driver = {
-+ .name = "MT7621-NAND",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7621_nand_match,
-+ },
-+};
-+
-+static int __init
-+mtk_nand_init(void)
-+{
-+ printk("MediaTek Nand driver init, version %s\n", VERSION);
-+
-+ return platform_driver_register(&mtk_nand_driver);
-+}
-+
-+static void __exit
-+mtk_nand_exit(void)
-+{
-+ platform_driver_unregister(&mtk_nand_driver);
-+}
-+
-+module_init(mtk_nand_init);
-+module_exit(mtk_nand_exit);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand.h
-@@ -0,0 +1,452 @@
-+#ifndef __MTK_NAND_H
-+#define __MTK_NAND_H
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+/*******************************************************************************
-+ * NFI Register Definition
-+ *******************************************************************************/
-+
-+#define NFI_CNFG_REG16 ((volatile P_U16)(NFI_BASE+0x0000))
-+#define NFI_PAGEFMT_REG16 ((volatile P_U16)(NFI_BASE+0x0004))
-+#define NFI_CON_REG16 ((volatile P_U16)(NFI_BASE+0x0008))
-+#define NFI_ACCCON_REG32 ((volatile P_U32)(NFI_BASE+0x000C))
-+#define NFI_INTR_EN_REG16 ((volatile P_U16)(NFI_BASE+0x0010))
-+#define NFI_INTR_REG16 ((volatile P_U16)(NFI_BASE+0x0014))
-+
-+#define NFI_CMD_REG16 ((volatile P_U16)(NFI_BASE+0x0020))
-+
-+#define NFI_ADDRNOB_REG16 ((volatile P_U16)(NFI_BASE+0x0030))
-+#define NFI_COLADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0034))
-+#define NFI_ROWADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0038))
-+
-+#define NFI_STRDATA_REG16 ((volatile P_U16)(NFI_BASE+0x0040))
-+
-+#define NFI_DATAW_REG32 ((volatile P_U32)(NFI_BASE+0x0050))
-+#define NFI_DATAR_REG32 ((volatile P_U32)(NFI_BASE+0x0054))
-+#define NFI_PIO_DIRDY_REG16 ((volatile P_U16)(NFI_BASE+0x0058))
-+
-+#define NFI_STA_REG32 ((volatile P_U32)(NFI_BASE+0x0060))
-+#define NFI_FIFOSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0064))
-+#define NFI_LOCKSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0068))
-+
-+#define NFI_ADDRCNTR_REG16 ((volatile P_U16)(NFI_BASE+0x0070))
-+
-+#define NFI_STRADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0080))
-+#define NFI_BYTELEN_REG16 ((volatile P_U16)(NFI_BASE+0x0084))
-+
-+#define NFI_CSEL_REG16 ((volatile P_U16)(NFI_BASE+0x0090))
-+#define NFI_IOCON_REG16 ((volatile P_U16)(NFI_BASE+0x0094))
-+
-+#define NFI_FDM0L_REG32 ((volatile P_U32)(NFI_BASE+0x00A0))
-+#define NFI_FDM0M_REG32 ((volatile P_U32)(NFI_BASE+0x00A4))
-+
-+#define NFI_LOCK_REG16 ((volatile P_U16)(NFI_BASE+0x0100))
-+#define NFI_LOCKCON_REG32 ((volatile P_U32)(NFI_BASE+0x0104))
-+#define NFI_LOCKANOB_REG16 ((volatile P_U16)(NFI_BASE+0x0108))
-+#define NFI_LOCK00ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0110))
-+#define NFI_LOCK00FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0114))
-+#define NFI_LOCK01ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0118))
-+#define NFI_LOCK01FMT_REG32 ((volatile P_U32)(NFI_BASE+0x011C))
-+#define NFI_LOCK02ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0120))
-+#define NFI_LOCK02FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0124))
-+#define NFI_LOCK03ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0128))
-+#define NFI_LOCK03FMT_REG32 ((volatile P_U32)(NFI_BASE+0x012C))
-+#define NFI_LOCK04ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0130))
-+#define NFI_LOCK04FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0134))
-+#define NFI_LOCK05ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0138))
-+#define NFI_LOCK05FMT_REG32 ((volatile P_U32)(NFI_BASE+0x013C))
-+#define NFI_LOCK06ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0140))
-+#define NFI_LOCK06FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0144))
-+#define NFI_LOCK07ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0148))
-+#define NFI_LOCK07FMT_REG32 ((volatile P_U32)(NFI_BASE+0x014C))
-+#define NFI_LOCK08ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0150))
-+#define NFI_LOCK08FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0154))
-+#define NFI_LOCK09ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0158))
-+#define NFI_LOCK09FMT_REG32 ((volatile P_U32)(NFI_BASE+0x015C))
-+#define NFI_LOCK10ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0160))
-+#define NFI_LOCK10FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0164))
-+#define NFI_LOCK11ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0168))
-+#define NFI_LOCK11FMT_REG32 ((volatile P_U32)(NFI_BASE+0x016C))
-+#define NFI_LOCK12ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0170))
-+#define NFI_LOCK12FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0174))
-+#define NFI_LOCK13ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0178))
-+#define NFI_LOCK13FMT_REG32 ((volatile P_U32)(NFI_BASE+0x017C))
-+#define NFI_LOCK14ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0180))
-+#define NFI_LOCK14FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0184))
-+#define NFI_LOCK15ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0188))
-+#define NFI_LOCK15FMT_REG32 ((volatile P_U32)(NFI_BASE+0x018C))
-+
-+#define NFI_FIFODATA0_REG32 ((volatile P_U32)(NFI_BASE+0x0190))
-+#define NFI_FIFODATA1_REG32 ((volatile P_U32)(NFI_BASE+0x0194))
-+#define NFI_FIFODATA2_REG32 ((volatile P_U32)(NFI_BASE+0x0198))
-+#define NFI_FIFODATA3_REG32 ((volatile P_U32)(NFI_BASE+0x019C))
-+#define NFI_MASTERSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0210))
-+
-+
-+/*******************************************************************************
-+ * NFI Register Field Definition
-+ *******************************************************************************/
-+
-+/* NFI_CNFG */
-+#define CNFG_AHB (0x0001)
-+#define CNFG_READ_EN (0x0002)
-+#define CNFG_DMA_BURST_EN (0x0004)
-+#define CNFG_BYTE_RW (0x0040)
-+#define CNFG_HW_ECC_EN (0x0100)
-+#define CNFG_AUTO_FMT_EN (0x0200)
-+#define CNFG_OP_IDLE (0x0000)
-+#define CNFG_OP_READ (0x1000)
-+#define CNFG_OP_SRD (0x2000)
-+#define CNFG_OP_PRGM (0x3000)
-+#define CNFG_OP_ERASE (0x4000)
-+#define CNFG_OP_RESET (0x5000)
-+#define CNFG_OP_CUST (0x6000)
-+#define CNFG_OP_MODE_MASK (0x7000)
-+#define CNFG_OP_MODE_SHIFT (12)
-+
-+/* NFI_PAGEFMT */
-+#define PAGEFMT_512 (0x0000)
-+#define PAGEFMT_2K (0x0001)
-+#define PAGEFMT_4K (0x0002)
-+
-+#define PAGEFMT_PAGE_MASK (0x0003)
-+
-+#define PAGEFMT_DBYTE_EN (0x0008)
-+
-+#define PAGEFMT_SPARE_16 (0x0000)
-+#define PAGEFMT_SPARE_26 (0x0001)
-+#define PAGEFMT_SPARE_27 (0x0002)
-+#define PAGEFMT_SPARE_28 (0x0003)
-+#define PAGEFMT_SPARE_MASK (0x0030)
-+#define PAGEFMT_SPARE_SHIFT (4)
-+
-+#define PAGEFMT_FDM_MASK (0x0F00)
-+#define PAGEFMT_FDM_SHIFT (8)
-+
-+#define PAGEFMT_FDM_ECC_MASK (0xF000)
-+#define PAGEFMT_FDM_ECC_SHIFT (12)
-+
-+/* NFI_CON */
-+#define CON_FIFO_FLUSH (0x0001)
-+#define CON_NFI_RST (0x0002)
-+#define CON_NFI_SRD (0x0010)
-+
-+#define CON_NFI_NOB_MASK (0x0060)
-+#define CON_NFI_NOB_SHIFT (5)
-+
-+#define CON_NFI_BRD (0x0100)
-+#define CON_NFI_BWR (0x0200)
-+
-+#define CON_NFI_SEC_MASK (0xF000)
-+#define CON_NFI_SEC_SHIFT (12)
-+
-+/* NFI_ACCCON */
-+#define ACCCON_SETTING ()
-+
-+/* NFI_INTR_EN */
-+#define INTR_RD_DONE_EN (0x0001)
-+#define INTR_WR_DONE_EN (0x0002)
-+#define INTR_RST_DONE_EN (0x0004)
-+#define INTR_ERASE_DONE_EN (0x0008)
-+#define INTR_BSY_RTN_EN (0x0010)
-+#define INTR_ACC_LOCK_EN (0x0020)
-+#define INTR_AHB_DONE_EN (0x0040)
-+#define INTR_ALL_INTR_DE (0x0000)
-+#define INTR_ALL_INTR_EN (0x007F)
-+
-+/* NFI_INTR */
-+#define INTR_RD_DONE (0x0001)
-+#define INTR_WR_DONE (0x0002)
-+#define INTR_RST_DONE (0x0004)
-+#define INTR_ERASE_DONE (0x0008)
-+#define INTR_BSY_RTN (0x0010)
-+#define INTR_ACC_LOCK (0x0020)
-+#define INTR_AHB_DONE (0x0040)
-+
-+/* NFI_ADDRNOB */
-+#define ADDR_COL_NOB_MASK (0x0003)
-+#define ADDR_COL_NOB_SHIFT (0)
-+#define ADDR_ROW_NOB_MASK (0x0030)
-+#define ADDR_ROW_NOB_SHIFT (4)
-+
-+/* NFI_STA */
-+#define STA_READ_EMPTY (0x00001000)
-+#define STA_ACC_LOCK (0x00000010)
-+#define STA_CMD_STATE (0x00000001)
-+#define STA_ADDR_STATE (0x00000002)
-+#define STA_DATAR_STATE (0x00000004)
-+#define STA_DATAW_STATE (0x00000008)
-+
-+#define STA_NAND_FSM_MASK (0x1F000000)
-+#define STA_NAND_BUSY (0x00000100)
-+#define STA_NAND_BUSY_RETURN (0x00000200)
-+#define STA_NFI_FSM_MASK (0x000F0000)
-+#define STA_NFI_OP_MASK (0x0000000F)
-+
-+/* NFI_FIFOSTA */
-+#define FIFO_RD_EMPTY (0x0040)
-+#define FIFO_RD_FULL (0x0080)
-+#define FIFO_WR_FULL (0x8000)
-+#define FIFO_WR_EMPTY (0x4000)
-+#define FIFO_RD_REMAIN(x) (0x1F&(x))
-+#define FIFO_WR_REMAIN(x) ((0x1F00&(x))>>8)
-+
-+/* NFI_ADDRCNTR */
-+#define ADDRCNTR_CNTR(x) ((0xF000&(x))>>12)
-+#define ADDRCNTR_OFFSET(x) (0x03FF&(x))
-+
-+/* NFI_LOCK */
-+#define NFI_LOCK_ON (0x0001)
-+
-+/* NFI_LOCKANOB */
-+#define PROG_RADD_NOB_MASK (0x7000)
-+#define PROG_RADD_NOB_SHIFT (12)
-+#define PROG_CADD_NOB_MASK (0x0300)
-+#define PROG_CADD_NOB_SHIFT (8)
-+#define ERASE_RADD_NOB_MASK (0x0070)
-+#define ERASE_RADD_NOB_SHIFT (4)
-+#define ERASE_CADD_NOB_MASK (0x0007)
-+#define ERASE_CADD_NOB_SHIFT (0)
-+
-+/*******************************************************************************
-+ * ECC Register Definition
-+ *******************************************************************************/
-+
-+#define ECC_ENCCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0000))
-+#define ECC_ENCCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0004))
-+#define ECC_ENCDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0008))
-+#define ECC_ENCIDLE_REG32 ((volatile P_U32)(NFIECC_BASE+0x000C))
-+#define ECC_ENCPAR0_REG32 ((volatile P_U32)(NFIECC_BASE+0x0010))
-+#define ECC_ENCPAR1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0014))
-+#define ECC_ENCPAR2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0018))
-+#define ECC_ENCPAR3_REG32 ((volatile P_U32)(NFIECC_BASE+0x001C))
-+#define ECC_ENCPAR4_REG32 ((volatile P_U32)(NFIECC_BASE+0x0020))
-+#define ECC_ENCSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0024))
-+#define ECC_ENCIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0028))
-+#define ECC_ENCIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x002C))
-+
-+#define ECC_DECCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0100))
-+#define ECC_DECCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0104))
-+#define ECC_DECDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0108))
-+#define ECC_DECIDLE_REG16 ((volatile P_U16)(NFIECC_BASE+0x010C))
-+#define ECC_DECFER_REG16 ((volatile P_U16)(NFIECC_BASE+0x0110))
-+#define ECC_DECENUM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0114))
-+#define ECC_DECDONE_REG16 ((volatile P_U16)(NFIECC_BASE+0x0118))
-+#define ECC_DECEL0_REG32 ((volatile P_U32)(NFIECC_BASE+0x011C))
-+#define ECC_DECEL1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0120))
-+#define ECC_DECEL2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0124))
-+#define ECC_DECEL3_REG32 ((volatile P_U32)(NFIECC_BASE+0x0128))
-+#define ECC_DECEL4_REG32 ((volatile P_U32)(NFIECC_BASE+0x012C))
-+#define ECC_DECEL5_REG32 ((volatile P_U32)(NFIECC_BASE+0x0130))
-+#define ECC_DECIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0134))
-+#define ECC_DECIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x0138))
-+#define ECC_FDMADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x013C))
-+#define ECC_DECFSM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0140))
-+#define ECC_SYNSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0144))
-+#define ECC_DECNFIDI_REG32 ((volatile P_U32)(NFIECC_BASE+0x0148))
-+#define ECC_SYN0_REG32 ((volatile P_U32)(NFIECC_BASE+0x014C))
-+
-+/*******************************************************************************
-+ * ECC register definition
-+ *******************************************************************************/
-+/* ECC_ENCON */
-+#define ENC_EN (0x0001)
-+#define ENC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define ECC_CNFG_ECC4 (0x0000)
-+#define ECC_CNFG_ECC6 (0x0001)
-+#define ECC_CNFG_ECC8 (0x0002)
-+#define ECC_CNFG_ECC10 (0x0003)
-+#define ECC_CNFG_ECC12 (0x0004)
-+#define ECC_CNFG_ECC_MASK (0x00000007)
-+
-+#define ENC_CNFG_NFI (0x0010)
-+#define ENC_CNFG_MODE_MASK (0x0010)
-+
-+#define ENC_CNFG_META6 (0x10300000)
-+#define ENC_CNFG_META8 (0x10400000)
-+
-+#define ENC_CNFG_MSG_MASK (0x1FFF0000)
-+#define ENC_CNFG_MSG_SHIFT (0x10)
-+
-+/* ECC_ENCIDLE */
-+#define ENC_IDLE (0x0001)
-+
-+/* ECC_ENCSTA */
-+#define STA_FSM (0x001F)
-+#define STA_COUNT_PS (0xFF10)
-+#define STA_COUNT_MS (0x3FFF0000)
-+
-+/* ECC_ENCIRQEN */
-+#define ENC_IRQEN (0x0001)
-+
-+/* ECC_ENCIRQSTA */
-+#define ENC_IRQSTA (0x0001)
-+
-+/* ECC_DECCON */
-+#define DEC_EN (0x0001)
-+#define DEC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define DEC_CNFG_ECC4 (0x0000)
-+//#define DEC_CNFG_ECC6 (0x0001)
-+//#define DEC_CNFG_ECC12 (0x0002)
-+#define DEC_CNFG_NFI (0x0010)
-+//#define DEC_CNFG_META6 (0x10300000)
-+//#define DEC_CNFG_META8 (0x10400000)
-+
-+#define DEC_CNFG_FER (0x01000)
-+#define DEC_CNFG_EL (0x02000)
-+#define DEC_CNFG_CORRECT (0x03000)
-+#define DEC_CNFG_TYPE_MASK (0x03000)
-+
-+#define DEC_CNFG_EMPTY_EN (0x80000000)
-+
-+#define DEC_CNFG_CODE_MASK (0x1FFF0000)
-+#define DEC_CNFG_CODE_SHIFT (0x10)
-+
-+/* ECC_DECIDLE */
-+#define DEC_IDLE (0x0001)
-+
-+/* ECC_DECFER */
-+#define DEC_FER0 (0x0001)
-+#define DEC_FER1 (0x0002)
-+#define DEC_FER2 (0x0004)
-+#define DEC_FER3 (0x0008)
-+#define DEC_FER4 (0x0010)
-+#define DEC_FER5 (0x0020)
-+#define DEC_FER6 (0x0040)
-+#define DEC_FER7 (0x0080)
-+
-+/* ECC_DECENUM */
-+#define ERR_NUM0 (0x0000000F)
-+#define ERR_NUM1 (0x000000F0)
-+#define ERR_NUM2 (0x00000F00)
-+#define ERR_NUM3 (0x0000F000)
-+#define ERR_NUM4 (0x000F0000)
-+#define ERR_NUM5 (0x00F00000)
-+#define ERR_NUM6 (0x0F000000)
-+#define ERR_NUM7 (0xF0000000)
-+
-+/* ECC_DECDONE */
-+#define DEC_DONE0 (0x0001)
-+#define DEC_DONE1 (0x0002)
-+#define DEC_DONE2 (0x0004)
-+#define DEC_DONE3 (0x0008)
-+#define DEC_DONE4 (0x0010)
-+#define DEC_DONE5 (0x0020)
-+#define DEC_DONE6 (0x0040)
-+#define DEC_DONE7 (0x0080)
-+
-+/* ECC_DECIRQEN */
-+#define DEC_IRQEN (0x0001)
-+
-+/* ECC_DECIRQSTA */
-+#define DEC_IRQSTA (0x0001)
-+
-+#define CHIPVER_ECO_1 (0x8a00)
-+#define CHIPVER_ECO_2 (0x8a01)
-+
-+//#define NAND_PFM
-+
-+/*******************************************************************************
-+ * Data Structure Definition
-+ *******************************************************************************/
-+struct mtk_nand_host
-+{
-+ struct nand_chip nand_chip;
-+ struct mtd_info mtd;
-+ struct mtk_nand_host_hw *hw;
-+};
-+
-+struct NAND_CMD
-+{
-+ u32 u4ColAddr;
-+ u32 u4RowAddr;
-+ u32 u4OOBRowAddr;
-+ u8 au1OOB[288];
-+ u8* pDataBuf;
-+#ifdef NAND_PFM
-+ u32 pureReadOOB;
-+ u32 pureReadOOBNum;
-+#endif
-+};
-+
-+/*
-+ * ECC layout control structure. Exported to userspace for
-+ * diagnosis and to allow creation of raw images
-+struct nand_ecclayout {
-+ uint32_t eccbytes;
-+ uint32_t eccpos[64];
-+ uint32_t oobavail;
-+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
-+};
-+*/
-+#define __DEBUG_NAND 1 /* Debug information on/off */
-+
-+/* Debug message event */
-+#define DBG_EVT_NONE 0x00000000 /* No event */
-+#define DBG_EVT_INIT 0x00000001 /* Initial related event */
-+#define DBG_EVT_VERIFY 0x00000002 /* Verify buffer related event */
-+#define DBG_EVT_PERFORMANCE 0x00000004 /* Performance related event */
-+#define DBG_EVT_READ 0x00000008 /* Read related event */
-+#define DBG_EVT_WRITE 0x00000010 /* Write related event */
-+#define DBG_EVT_ERASE 0x00000020 /* Erase related event */
-+#define DBG_EVT_BADBLOCK 0x00000040 /* Badblock related event */
-+#define DBG_EVT_POWERCTL 0x00000080 /* Suspend/Resume related event */
-+
-+#define DBG_EVT_ALL 0xffffffff
-+
-+#define DBG_EVT_MASK (DBG_EVT_INIT)
-+
-+#if __DEBUG_NAND
-+#define MSG(evt, fmt, args...) \
-+do { \
-+ if ((DBG_EVT_##evt) & DBG_EVT_MASK) { \
-+ printk(fmt, ##args); \
-+ } \
-+} while(0)
-+
-+#define MSG_FUNC_ENTRY(f) MSG(FUC, "<FUN_ENT>: %s\n", __FUNCTION__)
-+#else
-+#define MSG(evt, fmt, args...) do{}while(0)
-+#define MSG_FUNC_ENTRY(f) do{}while(0)
-+#endif
-+
-+#define RAMDOM_READ 1<<0
-+#define CACHE_READ 1<<1
-+
-+typedef struct
-+{
-+ u16 id; //deviceid+menuid
-+ u32 ext_id;
-+ u8 addr_cycle;
-+ u8 iowidth;
-+ u16 totalsize;
-+ u16 blocksize;
-+ u16 pagesize;
-+ u16 sparesize;
-+ u32 timmingsetting;
-+ char devciename[14];
-+ u32 advancedmode; //
-+}flashdev_info,*pflashdev_info;
-+
-+/* NAND driver */
-+#if 0
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern u32 CFG_BLOCKSIZE;
-+#endif
-+#endif
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -90,7 +90,7 @@ static struct nand_ecclayout nand_oob_12
- .length = 78} }
- };
-
--static int nand_get_device(struct mtd_info *mtd, int new_state);
-+int nand_get_device(struct mtd_info *mtd, int new_state);
-
- static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
- struct mtd_oob_ops *ops);
-@@ -128,7 +128,7 @@ static int check_offs_len(struct mtd_inf
- *
- * Release chip lock and wake up anyone waiting on the device.
- */
--static void nand_release_device(struct mtd_info *mtd)
-+void nand_release_device(struct mtd_info *mtd)
- {
- struct nand_chip *chip = mtd->priv;
-
-@@ -739,7 +739,7 @@ static void panic_nand_get_device(struct
- *
- * Get the device and lock it for exclusive access
- */
--static int
-+int
- nand_get_device(struct mtd_info *mtd, int new_state)
- {
- struct nand_chip *chip = mtd->priv;
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1378,6 +1378,25 @@ int nand_isbad_bbt(struct mtd_info *mtd,
- return 1;
- }
-
-+void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ this->bbt[block >> 3] &= ~(0x03 << (block & 0x6));
-+ this->bbt[block >> 3] |= (flag & 0x3) << (block & 0x6);
-+}
-+
-+int nand_bbt_get(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ return (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
-+}
-+
- EXPORT_SYMBOL(nand_scan_bbt);
- EXPORT_SYMBOL(nand_default_bbt);
- EXPORT_SYMBOL_GPL(nand_update_bbt);
---- /dev/null
-+++ b/drivers/mtd/nand/nand_def.h
-@@ -0,0 +1,123 @@
-+#ifndef __NAND_DEF_H__
-+#define __NAND_DEF_H__
-+
-+#define VERSION "v2.1 Fix AHB virt2phys error"
-+#define MODULE_NAME "# MTK NAND #"
-+#define PROCNAME "driver/nand"
-+
-+#undef TESTTIME
-+//#define __UBOOT_NAND__ 1
-+#define __KERNEL_NAND__ 1
-+//#define __PRELOADER_NAND__ 1
-+//#define PMT 1
-+//#define _MTK_NAND_DUMMY_DRIVER
-+//#define CONFIG_BADBLOCK_CHECK 1
-+//#ifdef CONFIG_BADBLOCK_CHECK
-+//#define MTK_NAND_BMT 1
-+//#endif
-+#define ECC_ENABLE 1
-+#define MANUAL_CORRECT 1
-+//#define __INTERNAL_USE_AHB_MODE__ (0)
-+#define SKIP_BAD_BLOCK
-+#define FACT_BBT
-+
-+#ifndef NAND_OTP_SUPPORT
-+#define NAND_OTP_SUPPORT 0
-+#endif
-+
-+/*******************************************************************************
-+ * Macro definition
-+ *******************************************************************************/
-+//#define NFI_SET_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) | (value)))
-+//#define NFI_SET_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) | (value)))
-+//#define NFI_CLN_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) & (~(value))))
-+//#define NFI_CLN_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) & (~(value))))
-+
-+#if defined (__KERNEL_NAND__)
-+#define NFI_SET_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) | (value));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_SET_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) | (value));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) & (~(value)));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) & (~(value)));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+#endif
-+
-+#define NFI_WAIT_STATE_DONE(state) do{;}while (__raw_readl(NFI_STA_REG32) & state)
-+#define NFI_WAIT_TO_READY() do{;}while (!(__raw_readl(NFI_STA_REG32) & STA_BUSY2READY))
-+
-+
-+#define NAND_SECTOR_SIZE (512)
-+#define OOB_PER_SECTOR (16)
-+#define OOB_AVAI_PER_SECTOR (8)
-+
-+#ifndef PART_SIZE_BMTPOOL
-+#define BMT_POOL_SIZE (80)
-+#else
-+#define BMT_POOL_SIZE (PART_SIZE_BMTPOOL)
-+#endif
-+
-+#define PMT_POOL_SIZE (2)
-+
-+#define TIMEOUT_1 0x1fff
-+#define TIMEOUT_2 0x8ff
-+#define TIMEOUT_3 0xffff
-+#define TIMEOUT_4 0xffff//5000 //PIO
-+
-+
-+/* temporarity definiation */
-+#if !defined (__KERNEL_NAND__)
-+#define KERN_INFO
-+#define KERN_WARNING
-+#define KERN_ERR
-+#define PAGE_SIZE (4096)
-+#endif
-+#define AddStorageTrace //AddStorageTrace
-+#define STORAGE_LOGGER_MSG_NAND 0
-+#define NFI_BASE RALINK_NAND_CTRL_BASE
-+#define NFIECC_BASE RALINK_NANDECC_CTRL_BASE
-+
-+#ifdef __INTERNAL_USE_AHB_MODE__
-+#define MT65xx_POLARITY_LOW 0
-+#define MT65XX_PDN_PERI_NFI 0
-+#define MT65xx_EDGE_SENSITIVE 0
-+#define MT6575_NFI_IRQ_ID (58)
-+#endif
-+
-+#if defined (__KERNEL_NAND__)
-+#define RALINK_REG(x) (*((volatile u32 *)(x)))
-+#define __virt_to_phys(x) virt_to_phys((volatile void*)x)
-+#else
-+#define CONFIG_MTD_NAND_VERIFY_WRITE (1)
-+#define printk printf
-+#define ra_dbg printf
-+#define BUG() //BUG()
-+#define BUG_ON(x) //BUG_ON()
-+#define NUM_PARTITIONS 1
-+#endif
-+
-+#define NFI_DEFAULT_ACCESS_TIMING (0x30C77fff) //(0x44333)
-+
-+//uboot only support 1 cs
-+#define NFI_CS_NUM (1)
-+#define NFI_DEFAULT_CS (0)
-+
-+#include "mt6575_typedefs.h"
-+
-+#endif /* __NAND_DEF_H__ */
---- /dev/null
-+++ b/drivers/mtd/nand/nand_device_list.h
-@@ -0,0 +1,55 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __NAND_DEVICE_LIST_H__
-+#define __NAND_DEVICE_LIST_H__
-+
-+static const flashdev_info gen_FlashTable[]={
-+ {0x20BC, 0x105554, 5, 16, 512, 128, 2048, 64, 0x1123, "EHD013151MA_5", 0},
-+ {0xECBC, 0x005554, 5, 16, 512, 128, 2048, 64, 0x1123, "K524G2GACB_A0", 0},
-+ {0x2CBC, 0x905556, 5, 16, 512, 128, 2048, 64, 0x21044333, "MT29C4G96MAZA", 0},
-+ {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
-+ {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
-+ {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
-+ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
-+ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
-+ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
-+ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0},
-+ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0},
-+ {0x0000, 0x000000, 0, 0, 0, 0, 0, 0, 0, "xxxxxxxxxx", 0},
-+};
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/partition.h
-@@ -0,0 +1,115 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define RECONFIG_PARTITION_SIZE 1
-+
-+#define MTD_BOOT_PART_SIZE 0x80000
-+#define MTD_CONFIG_PART_SIZE 0x20000
-+#define MTD_FACTORY_PART_SIZE 0x20000
-+
-+extern unsigned int CFG_BLOCKSIZE;
-+#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
-+
-+/*=======================================================================*/
-+/* NAND PARTITION Mapping */
-+/*=======================================================================*/
-+//#ifdef CONFIG_MTD_PARTITIONS
-+static struct mtd_partition g_pasStatic_Partition[] = {
-+ {
-+ name: "ALL",
-+ size: MTDPART_SIZ_FULL,
-+ offset: 0,
-+ },
-+ /* Put your own partition definitions here */
-+ {
-+ name: "Bootloader",
-+ size: MTD_BOOT_PART_SIZE,
-+ offset: 0,
-+ }, {
-+ name: "Config",
-+ size: MTD_CONFIG_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+ }, {
-+ name: "Factory",
-+ size: MTD_FACTORY_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "Kernel",
-+ size: MTD_KERN_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+ }, {
-+ name: "RootFS",
-+ size: MTD_ROOTFS_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
-+ }, {
-+ name: "Kernel_RootFS",
-+ size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,
-+ offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,
-+#endif
-+#else //CONFIG_RT2880_ROOTFS_IN_RAM
-+ }, {
-+ name: "Kernel",
-+ size: 0x10000,
-+ offset: MTDPART_OFS_APPEND,
-+#endif
-+#ifdef CONFIG_DUAL_IMAGE
-+ }, {
-+ name: "Kernel2",
-+ size: MTD_KERN2_PART_SIZE,
-+ offset: MTD_KERN2_PART_OFFSET,
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "RootFS2",
-+ size: MTD_ROOTFS2_PART_SIZE,
-+ offset: MTD_ROOTFS2_PART_OFFSET,
-+#endif
-+#endif
-+ }
-+
-+};
-+
-+#define NUM_PARTITIONS ARRAY_SIZE(g_pasStatic_Partition)
-+extern int part_num; // = NUM_PARTITIONS;
-+//#endif
-+#undef RECONFIG_PARTITION_SIZE
-+
diff --git a/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch b/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch
deleted file mode 100644
index c0270da..0000000
--- a/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch
+++ /dev/null
@@ -1,5814 +0,0 @@
-From b823088d8782e02cc39c7eb4d834396b83dabe49 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 27 Jan 2014 13:11:01 +0000
-Subject: [PATCH 214/215] usb: add mt7621 xhci support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/core/hub.c | 2 +-
- drivers/usb/core/port.c | 3 +-
- drivers/usb/host/Kconfig | 6 +-
- drivers/usb/host/Makefile | 10 +-
- drivers/usb/host/mtk-phy-7621.c | 445 +++++
- drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++
- drivers/usb/host/mtk-phy-ahb.c | 58 +
- drivers/usb/host/mtk-phy.c | 102 ++
- drivers/usb/host/mtk-phy.h | 179 ++
- drivers/usb/host/pci-quirks.h | 2 +-
- drivers/usb/host/xhci-dbg.c | 3 +
- drivers/usb/host/xhci-mem.c | 11 +
- drivers/usb/host/xhci-mtk-power.c | 115 ++
- drivers/usb/host/xhci-mtk-power.h | 13 +
- drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++
- drivers/usb/host/xhci-mtk-scheduler.h | 77 +
- drivers/usb/host/xhci-mtk.c | 265 +++
- drivers/usb/host/xhci-mtk.h | 120 ++
- drivers/usb/host/xhci-plat.c | 19 +
- drivers/usb/host/xhci-ring.c | 109 +-
- drivers/usb/host/xhci.c | 201 ++-
- drivers/usb/host/xhci.h | 23 +-
- 22 files changed, 5229 insertions(+), 13 deletions(-)
- create mode 100644 drivers/usb/host/mtk-phy-7621.c
- create mode 100644 drivers/usb/host/mtk-phy-7621.h
- create mode 100644 drivers/usb/host/mtk-phy-ahb.c
- create mode 100644 drivers/usb/host/mtk-phy.c
- create mode 100644 drivers/usb/host/mtk-phy.h
- create mode 100644 drivers/usb/host/xhci-mtk-power.c
- create mode 100644 drivers/usb/host/xhci-mtk-power.h
- create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c
- create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h
- create mode 100644 drivers/usb/host/xhci-mtk.c
- create mode 100644 drivers/usb/host/xhci-mtk.h
-
-Index: linux-3.10.44/drivers/usb/core/hub.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/core/hub.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/core/hub.c 2014-07-02 11:20:15.817675027 +0100
-@@ -1254,7 +1254,7 @@
- if (type != HUB_SUSPEND) {
- /* Disconnect all the children */
- for (i = 0; i < hdev->maxchild; ++i) {
-- if (hub->ports[i]->child)
-+ if (hub->ports[i] && hub->ports[i]->child)
- usb_disconnect(&hub->ports[i]->child);
- }
- }
-Index: linux-3.10.44/drivers/usb/core/port.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/core/port.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/core/port.c 2014-07-02 11:20:15.817675027 +0100
-@@ -193,6 +193,7 @@
- void usb_hub_remove_port_device(struct usb_hub *hub,
- int port1)
- {
-- device_unregister(&hub->ports[port1 - 1]->dev);
-+ if (hub->ports[port1 - 1])
-+ device_unregister(&hub->ports[port1 - 1]->dev);
- }
-
-Index: linux-3.10.44/drivers/usb/host/Kconfig
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/Kconfig 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/Kconfig 2014-07-02 11:27:17.469659353 +0100
-@@ -28,7 +28,13 @@
- if USB_XHCI_HCD
-
- config USB_XHCI_PLATFORM
-- tristate
-+ bool "xHCI platform"
-+ depends on SOC_MT7621
-+
-+config USB_MT7621_XHCI_PLATFORM
-+ bool "MTK MT7621 xHCI"
-+ depends on USB_XHCI_PLATFORM
-+ depends on SOC_MT7621
-
- config USB_XHCI_HCD_DEBUGGING
- bool "Debugging for the xHCI host controller"
-Index: linux-3.10.44/drivers/usb/host/Makefile
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/Makefile 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/Makefile 2014-07-02 11:20:15.817675027 +0100
-@@ -13,15 +13,23 @@
-
- xhci-hcd-y := xhci.o xhci-mem.o
- xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- xhci-hcd-$(CONFIG_PCI) += xhci-pci.o
-+endif
-+
-+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
-+endif
-
- ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
-- xhci-hcd-y += xhci-plat.o
-+xhci-hcd-y += xhci-plat.o
- endif
-
- obj-$(CONFIG_USB_WHCI_HCD) += whci/
-
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_PCI) += pci-quirks.o
-+endif
-
- obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
- obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
-Index: linux-3.10.44/drivers/usb/host/mtk-phy-7621.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/mtk-phy-7621.c 2014-07-02 11:20:15.817675027 +0100
-@@ -0,0 +1,445 @@
-+#include "mtk-phy.h"
-+
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+
-+//not used on SoC
-+PHY_INT32 phy_init(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
-+ return PHY_TRUE;
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CheckPtInRegion()
-+// Description : Check if the test point is in a rectangle region.
-+// If it is in the rectangle, also check if this point
-+// is on the multiple of deltaX and deltaY.
-+// Parameter : strucScanRegion * prEye - the region
-+// BYTE bX
-+// BYTE bY
-+// Return : BYTE - TRUE : This point needs to be tested
-+// FALSE: This point will be omitted
-+// Note : First check within the rectangle.
-+// Secondly, use modulous to check if the point will be tested.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
-+{
-+ PHY_INT8 fgValid = true;
-+
-+
-+ /// Be careful, the axis origin is on the TOP-LEFT corner.
-+ /// Therefore the top-left point has the minimum X and Y
-+ /// Botton-right point is the maximum X and Y
-+ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
-+ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
-+ {
-+ // With the region, now check whether or not the input test point is
-+ // on the multiples of X and Y
-+ // Do not have to worry about negative value, because we have already
-+ // check the input bX, and bY is within the region.
-+ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
-+ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
-+ {
-+ // if the division will have remainder, that means
-+ // the input test point is on the multiples of X and Y
-+ fgValid = false;
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else
-+ {
-+
-+ fgValid = false;
-+ }
-+ return fgValid;
-+}
-+
-+//--------------------------------------------------------
-+// Function : EyeScanHelper_RunTest()
-+// Description : Enable the test, and wait til it is completed
-+// Parameter : None
-+// Return : None
-+// Note : None
-+//--------------------------------------------------------
-+static void EyeScanHelper_RunTest(struct u3phy_info *info)
-+{
-+ DRV_UDELAY(100);
-+ // Disable the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
-+ DRV_UDELAY(100);
-+ // Run the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
-+ DRV_UDELAY(100);
-+ // Wait til it's done
-+ //RGS_SSUSB_RX_EYE_CNT_RDY
-+ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CalNextPoint()
-+// Description : Calcualte the test point for the measurement
-+// Parameter : None
-+// Return : BOOL - TRUE : the next point is within the
-+// boundaryof HW limit
-+// FALSE: the next point is out of the HW limit
-+// Note : The next point is obtained by calculating
-+// from the bottom left of the region rectangle
-+// and then scanning up until it reaches the upper
-+// limit. At this time, the x will increment, and
-+// start scanning downwards until the y hits the
-+// zero.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
-+{
-+ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
-+ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
-+ )
-+ {
-+ /// Reaches the limit of Y axis
-+ /// Increment X
-+ _bXcurr++;
-+ _fgXChged = true;
-+ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
-+
-+ if (_bXcurr > MAX_X)
-+ {
-+ return false;
-+ }
-+ }
-+ else
-+ {
-+ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
-+ _fgXChged = false;
-+ }
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 eyescan_init(struct u3phy_info *info){
-+ //initial PHY setting
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
-+ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
-+ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
-+ PHY_INT32 cOfst = 0;
-+ PHY_UINT8 bIdxX = 0;
-+ PHY_UINT8 bIdxY = 0;
-+ //PHY_INT8 bCnt = 0;
-+ PHY_UINT8 bIdxCycCnt = 0;
-+ PHY_INT8 fgValid;
-+ PHY_INT8 cX;
-+ PHY_INT8 cY;
-+ PHY_UINT8 bExtendCnt;
-+ PHY_INT8 isContinue;
-+ //PHY_INT8 isBreak;
-+ PHY_UINT32 wErr0 = 0, wErr1 = 0;
-+ //PHY_UINT32 temp;
-+
-+ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+
-+ _rEye1.bX_tl = x_t1;
-+ _rEye1.bY_tl = y_t1;
-+ _rEye1.bX_br = x_br;
-+ _rEye1.bY_br = y_br;
-+ _rEye1.bDeltaX = delta_x;
-+ _rEye1.bDeltaY = delta_y;
-+
-+ _rEye2.bX_tl = x_t1;
-+ _rEye2.bY_tl = y_t1;
-+ _rEye2.bX_br = x_br;
-+ _rEye2.bY_br = y_br;
-+ _rEye2.bDeltaX = delta_x;
-+ _rEye2.bDeltaY = delta_y;
-+
-+ _rTestCycle.wEyeCnt = eye_cnt;
-+ _rTestCycle.bNumOfEyeCnt = num_cnt;
-+ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
-+ _rTestCycle.bPICalEn = PI_cal_en;
-+
-+ _bXcurr = 0;
-+ _bYcurr = 0;
-+ _eScanDir = SCAN_DN;
-+ _fgXChged = false;
-+
-+ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
-+ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
-+ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
-+
-+ //force SIGDET to OFF
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
-+
-+ // RX_TRI_DET_EN to Disable
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
-+ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
-+
-+
-+ if (PI_cal_en){
-+ // PI Calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+
-+ DRV_UDELAY(20);
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ }
-+ // Read Initial DAC
-+ // Set CYCLE
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
-+ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
-+
-+ // Eye Monitor Feature
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 0; cOfst >= -64; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 0; cOfst < 64; cOfst++)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
-+ }
-+ //ClearErrorResult
-+ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
-+ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
-+ {
-+ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
-+ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ }
-+ }
-+ }
-+ isContinue = true;
-+ while(isContinue){
-+ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
-+ // The point is within the boundary, then let's check if it is within
-+ // the testing region.
-+ // The point is only test-able if one of the eye region
-+ // includes this point.
-+ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
-+ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
-+ // Translate bX and bY to 2's complement from where the origin was on the
-+ // top left corner.
-+ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
-+ cX = (_bXcurr ^ 0x40);
-+ cY = (_bYcurr ^ 0x3F);
-+
-+ // Set X if necessary
-+ if (_fgXChged == true)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ // Set Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
-+
-+ /// Test this point!
-+ if (fgValid){
-+ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
-+ {
-+ //run test
-+ EyeScanHelper_RunTest(info);
-+ }
-+ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
-+ {
-+ EyeScanHelper_RunTest(info);
-+ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
-+ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
-+
-+ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
-+ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
-+
-+ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
-+// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
-+// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
-+ }
-+ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
-+ }
-+ else{
-+
-+ }
-+ if (fgEyeScanHelper_CalNextPoint() == false){
-+#if 0
-+ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
-+ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
-+#endif
-+ printk(KERN_ERR "end of eye scan\n");
-+ isContinue = false;
-+ }
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
-+
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
-+ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
-+
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
-+ PHY_INT32 i=0;
-+ //PHY_INT32 j=0;
-+ //PHY_INT8 u1SrCalVal = 0;
-+ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
-+ PHY_INT32 fgRet = 0;
-+ PHY_INT32 u4FmOut = 0;
-+ PHY_INT32 u4Tmp = 0;
-+ //PHY_INT32 temp;
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 1
-+ // enable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
-+ DRV_MSLEEP(1);
-+
-+ // => RG_FRCK_EN = 1
-+ // Enable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
-+
-+ // MT6290 HS signal quality patch
-+ // => RG_CYCLECNT = 400
-+ // Setting cyclecnt =400
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
-+
-+ // => RG_FREQDET_EN = 1
-+ // Enable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
-+
-+ // wait for FM detection done, set 10ms timeout
-+ for(i=0; i<10; i++){
-+ // => u4FmOut = USB_FM_OUT
-+ // read FM_OUT
-+ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
-+ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
-+
-+ // check if FM detection done
-+ if (u4FmOut != 0)
-+ {
-+ fgRet = 0;
-+ printk("FM detection done! loop = %d\n", i);
-+
-+ break;
-+ }
-+
-+ fgRet = 1;
-+ DRV_MSLEEP(1);
-+ }
-+ // => RG_FREQDET_EN = 0
-+ // disable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
-+
-+ // => RG_FRCK_EN = 0
-+ // disable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 0
-+ // disable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
-+ DRV_MSLEEP(1);
-+
-+ if(u4FmOut == 0){
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
-+
-+ fgRet = 1;
-+ }
-+ else{
-+ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
-+ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
-+ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
-+ }
-+ return fgRet;
-+}
-+
-+#endif
-Index: linux-3.10.44/drivers/usb/host/mtk-phy-7621.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/mtk-phy-7621.h 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,2871 @@
-+#ifdef CONFIG_PROJECT_7621
-+#ifndef __MTK_PHY_7621_H
-+#define __MTK_PHY_7621_H
-+
-+#define U2_SR_COEF_7621 28
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u2phy_reg {
-+ //0x0
-+ PHY_LE32 u2phyac0;
-+ PHY_LE32 u2phyac1;
-+ PHY_LE32 u2phyac2;
-+ PHY_LE32 reserve0;
-+ //0x10
-+ PHY_LE32 u2phyacr0;
-+ PHY_LE32 u2phyacr1;
-+ PHY_LE32 u2phyacr2;
-+ PHY_LE32 u2phyacr3;
-+ //0x20
-+ PHY_LE32 u2phyacr4;
-+ PHY_LE32 u2phyamon0;
-+ PHY_LE32 reserve1[2];
-+ //0x30~0x50
-+ PHY_LE32 reserve2[12];
-+ //0x60
-+ PHY_LE32 u2phydcr0;
-+ PHY_LE32 u2phydcr1;
-+ PHY_LE32 u2phydtm0;
-+ PHY_LE32 u2phydtm1;
-+ //0x70
-+ PHY_LE32 u2phydmon0;
-+ PHY_LE32 u2phydmon1;
-+ PHY_LE32 u2phydmon2;
-+ PHY_LE32 u2phydmon3;
-+ //0x80
-+ PHY_LE32 u2phybc12c;
-+ PHY_LE32 u2phybc12c1;
-+ PHY_LE32 reserve3[2];
-+ //0x90~0xe0
-+ PHY_LE32 reserve4[24];
-+ //0xf0
-+ PHY_LE32 reserve6[3];
-+ PHY_LE32 regfcom;
-+};
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
-+#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
-+#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
-+#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
-+#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
-+#define RG_USB20_REF_EN (0x1<<15) //15:15
-+#define RG_USB20_INTR_EN (0x1<<14) //14:14
-+#define RG_USB20_BG_TRIM (0xf<<8) //11:8
-+#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
-+#define RG_USB20_BG_RASEL (0x3<<4) //5:4
-+#define RG_USB20_BGR_DIV (0x3<<2) //3:2
-+#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
-+#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
-+#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
-+#define RG_USB20_MPX_SEL (0xff<<16) //23:16
-+#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
-+#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
-+#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
-+#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
-+#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
-+#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
-+#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
-+#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
-+#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
-+#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
-+#define RG_USB20_LS_CR (0x7<<12) //14:12
-+#define RG_USB20_FS_CR (0x7<<8) //10:8
-+#define RG_USB20_LS_SR (0x7<<4) //6:4
-+#define RG_USB20_FS_SR (0x7<<0) //2:0
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
-+#define RG_USB20_SQD (0x3<<24) //25:24
-+#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
-+#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
-+#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
-+#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
-+#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
-+#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
-+#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
-+#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
-+#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
-+#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
-+#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
-+#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
-+#define RG_USB20_DISCD (0x3<<20) //21:20
-+#define RG_USB20_DISCTH (0xf<<16) //19:16
-+#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
-+#define RG_USB20_SQCAL (0xf<<8) //11:8
-+#define RG_USB20_SQTH (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
-+#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
-+#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
-+#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
-+#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
-+#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
-+#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
-+#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
-+#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
-+#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
-+#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
-+#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
-+#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
-+#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
-+#define RG_USB20_PHY_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
-+#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
-+#define USB20_DP_100K_EN (0x1<<16) //16:16
-+#define USB20_GPIO_DM_I (0x1<<15) //15:15
-+#define USB20_GPIO_DP_I (0x1<<14) //14:14
-+#define USB20_GPIO_DM_OE (0x1<<13) //13:13
-+#define USB20_GPIO_DP_OE (0x1<<12) //12:12
-+#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
-+#define USB20_GPIO_MODE (0x1<<8) //8:8
-+#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
-+#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
-+#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
-+#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
-+#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST (0x3<<30) //31:30
-+#define RG_USB20_GATED_ENB (0x1<<29) //29:29
-+#define RG_USB20_TESTMODE (0x3<<26) //27:26
-+#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
-+#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
-+#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
-+#define RG_USB20_EBTHRLD (0x1<<7) //7:7
-+#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
-+#define RG_USB20_TX_TST (0x1<<5) //5:5
-+#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
-+#define RG_USB20_CDR_FILT (0xf<<0) //3:0
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
-+#define RG_USB20_DRVVBUS (0x1<<23) //23:23
-+#define RG_DEBUG_EN (0x1<<22) //22:22
-+#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
-+#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
-+#define RG_USB20_BERTH (0x3<<16) //17:16
-+#define RG_USB20_LBMODE (0x3<<13) //14:13
-+#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
-+#define RG_USB20_TAPSEL (0xfff<<0) //11:0
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE (0x3<<30) //31:30
-+#define FORCE_UART_I (0x1<<29) //29:29
-+#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
-+#define FORCE_UART_TX_OE (0x1<<27) //27:27
-+#define FORCE_UART_EN (0x1<<26) //26:26
-+#define FORCE_USB_CLKEN (0x1<<25) //25:25
-+#define FORCE_DRVVBUS (0x1<<24) //24:24
-+#define FORCE_DATAIN (0x1<<23) //23:23
-+#define FORCE_TXVALID (0x1<<22) //22:22
-+#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
-+#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
-+#define FORCE_XCVRSEL (0x1<<19) //19:19
-+#define FORCE_SUSPENDM (0x1<<18) //18:18
-+#define FORCE_TERMSEL (0x1<<17) //17:17
-+#define FORCE_OPMODE (0x1<<16) //16:16
-+#define UTMI_MUXSEL (0x1<<15) //15:15
-+#define RG_RESET (0x1<<14) //14:14
-+#define RG_DATAIN (0xf<<10) //13:10
-+#define RG_TXVALIDH (0x1<<9) //9:9
-+#define RG_TXVALID (0x1<<8) //8:8
-+#define RG_DMPULLDOWN (0x1<<7) //7:7
-+#define RG_DPPULLDOWN (0x1<<6) //6:6
-+#define RG_XCVRSEL (0x3<<4) //5:4
-+#define RG_SUSPENDM (0x1<<3) //3:3
-+#define RG_TERMSEL (0x1<<2) //2:2
-+#define RG_OPMODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
-+#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
-+#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
-+#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
-+#define RG_UART_I (0x1<<19) //19:19
-+#define RG_UART_BIAS_EN (0x1<<18) //18:18
-+#define RG_UART_TX_OE (0x1<<17) //17:17
-+#define RG_UART_EN (0x1<<16) //16:16
-+#define FORCE_VBUSVALID (0x1<<13) //13:13
-+#define FORCE_SESSEND (0x1<<12) //12:12
-+#define FORCE_BVALID (0x1<<11) //11:11
-+#define FORCE_AVALID (0x1<<10) //10:10
-+#define FORCE_IDDIG (0x1<<9) //9:9
-+#define FORCE_IDPULLUP (0x1<<8) //8:8
-+#define RG_VBUSVALID (0x1<<5) //5:5
-+#define RG_SESSEND (0x1<<4) //4:4
-+#define RG_BVALID (0x1<<3) //3:3
-+#define RG_AVALID (0x1<<2) //2:2
-+#define RG_IDDIG (0x1<<1) //1:1
-+#define RG_IDPULLUP (0x1<<0) //0:0
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O (0x1<<31) //31:31
-+#define RGO_USB20_LB_PASS (0x1<<30) //30:30
-+#define RGO_USB20_LB_DONE (0x1<<29) //29:29
-+#define AD_USB20_BVALID (0x1<<28) //28:28
-+#define USB20_IDDIG (0x1<<27) //27:27
-+#define AD_USB20_VBUSVALID (0x1<<26) //26:26
-+#define AD_USB20_SESSEND (0x1<<25) //25:25
-+#define AD_USB20_AVALID (0x1<<24) //24:24
-+#define USB20_LINE_STATE (0x3<<22) //23:22
-+#define USB20_HST_DISCON (0x1<<21) //21:21
-+#define USB20_TX_READY (0x1<<20) //20:20
-+#define USB20_RX_ERROR (0x1<<19) //19:19
-+#define USB20_RX_ACTIVE (0x1<<18) //18:18
-+#define USB20_RX_VALIDH (0x1<<17) //17:17
-+#define USB20_RX_VALID (0x1<<16) //16:16
-+#define USB20_DATA_OUT (0xffff<<0) //15:0
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT (0xff<<24) //31:24
-+#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
-+#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
-+#define USB20_PROBE_OUT (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
-+#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
-+#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
-+#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
-+#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
-+#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
-+#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
-+#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
-+#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
-+#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
-+#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
-+#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
-+#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
-+#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
-+#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
-+#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
-+#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
-+#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
-+#define RG_CHGDT_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV (0xff<<0) //7:0
-+
-+//U3D_REGFCOM
-+#define RG_PAGE (0xff<<24) //31:24
-+#define I2C_MODE (0x1<<16) //16:16
-+
-+
-+/* OFFSET */
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN_OFST (28)
-+#define RG_USB20_USBPLL_CKCTRL_OFST (26)
-+#define RG_USB20_USBPLL_PREDIV_OFST (24)
-+#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
-+#define RG_USB20_USBPLL_FBDIV_OFST (16)
-+#define RG_USB20_REF_EN_OFST (15)
-+#define RG_USB20_INTR_EN_OFST (14)
-+#define RG_USB20_BG_TRIM_OFST (8)
-+#define RG_USB20_BG_RBSEL_OFST (6)
-+#define RG_USB20_BG_RASEL_OFST (4)
-+#define RG_USB20_BGR_DIV_OFST (2)
-+#define RG_SIFSLV_CHP_EN_OFST (1)
-+#define RG_SIFSLV_BGR_EN_OFST (0)
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL_OFST (28)
-+#define RG_USB20_TERM_VREF_SEL_OFST (24)
-+#define RG_USB20_MPX_SEL_OFST (16)
-+#define RG_USB20_MPX_OUT_SEL_OFST (12)
-+#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
-+#define RG_USB20_USBPLL_ACCEN_OFST (3)
-+#define RG_USB20_USBPLL_LF_OFST (2)
-+#define RG_USB20_USBPLL_BR_OFST (1)
-+#define RG_USB20_USBPLL_BP_OFST (0)
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
-+#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
-+#define RG_USB20_CLKREF_REV_OFST (0)
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN_OFST (24)
-+#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
-+#define RG_USB20_HSTX_SRCTRL_OFST (16)
-+#define RG_USB20_LS_CR_OFST (12)
-+#define RG_USB20_FS_CR_OFST (8)
-+#define RG_USB20_LS_SR_OFST (4)
-+#define RG_USB20_FS_SR_OFST (0)
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
-+#define RG_USB20_SQD_OFST (24)
-+#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
-+#define RG_USB20_HSTX_TMODE_EN_OFST (19)
-+#define RG_USB20_PHYD_MONEN_OFST (18)
-+#define RG_USB20_INLPBK_EN_OFST (17)
-+#define RG_USB20_CHIRP_EN_OFST (16)
-+#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
-+#define RG_USB20_DM_ABIST_SELE_OFST (8)
-+#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
-+#define RG_USB20_DP_ABIST_SELE_OFST (0)
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE_OFST (29)
-+#define RG_USB20_OTG_ABIST_EN_OFST (28)
-+#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
-+#define RG_USB20_OTG_VBUSTH_OFST (24)
-+#define RG_USB20_DISC_FIT_EN_OFST (22)
-+#define RG_USB20_DISCD_OFST (20)
-+#define RG_USB20_DISCTH_OFST (16)
-+#define RG_USB20_SQCAL_EN_OFST (15)
-+#define RG_USB20_SQCAL_OFST (8)
-+#define RG_USB20_SQTH_OFST (0)
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST_OFST (28)
-+#define RG_USB20_HSTX_BIST_EN_OFST (26)
-+#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
-+#define RG_USB20_HSRX_TMODE_EN_OFST (23)
-+#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
-+#define RG_USB20_USB11_TMODE_EN_OFST (19)
-+#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
-+#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
-+#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
-+#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
-+#define RG_USB20_PUPD_BIST_EN_OFST (12)
-+#define RG_USB20_EN_PU_DM_OFST (11)
-+#define RG_USB20_EN_PD_DM_OFST (10)
-+#define RG_USB20_EN_PU_DP_OFST (9)
-+#define RG_USB20_EN_PD_DP_OFST (8)
-+#define RG_USB20_PHY_REV_OFST (0)
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE_OFST (18)
-+#define RG_USB20_DM_100K_EN_OFST (17)
-+#define USB20_DP_100K_EN_OFST (16)
-+#define USB20_GPIO_DM_I_OFST (15)
-+#define USB20_GPIO_DP_I_OFST (14)
-+#define USB20_GPIO_DM_OE_OFST (13)
-+#define USB20_GPIO_DP_OE_OFST (12)
-+#define RG_USB20_GPIO_CTL_OFST (9)
-+#define USB20_GPIO_MODE_OFST (8)
-+#define RG_USB20_TX_BIAS_EN_OFST (5)
-+#define RG_USB20_TX_VCMPDN_EN_OFST (4)
-+#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
-+#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O_OFST (1)
-+#define RGO_USB20_GPIO_DP_O_OFST (0)
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST_OFST (30)
-+#define RG_USB20_GATED_ENB_OFST (29)
-+#define RG_USB20_TESTMODE_OFST (26)
-+#define RG_USB20_PLL_STABLE_OFST (25)
-+#define RG_USB20_PLL_FORCE_ON_OFST (24)
-+#define RG_USB20_PHYD_RESERVE_OFST (8)
-+#define RG_USB20_EBTHRLD_OFST (7)
-+#define RG_USB20_EARLY_HSTX_I_OFST (6)
-+#define RG_USB20_TX_TST_OFST (5)
-+#define RG_USB20_NEGEDGE_ENB_OFST (4)
-+#define RG_USB20_CDR_FILT_OFST (0)
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL_OFST (24)
-+#define RG_USB20_DRVVBUS_OFST (23)
-+#define RG_DEBUG_EN_OFST (22)
-+#define RG_USB20_OTG_PROBE_OFST (20)
-+#define RG_USB20_SW_PLLMODE_OFST (18)
-+#define RG_USB20_BERTH_OFST (16)
-+#define RG_USB20_LBMODE_OFST (13)
-+#define RG_USB20_FORCE_TAP_OFST (12)
-+#define RG_USB20_TAPSEL_OFST (0)
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE_OFST (30)
-+#define FORCE_UART_I_OFST (29)
-+#define FORCE_UART_BIAS_EN_OFST (28)
-+#define FORCE_UART_TX_OE_OFST (27)
-+#define FORCE_UART_EN_OFST (26)
-+#define FORCE_USB_CLKEN_OFST (25)
-+#define FORCE_DRVVBUS_OFST (24)
-+#define FORCE_DATAIN_OFST (23)
-+#define FORCE_TXVALID_OFST (22)
-+#define FORCE_DM_PULLDOWN_OFST (21)
-+#define FORCE_DP_PULLDOWN_OFST (20)
-+#define FORCE_XCVRSEL_OFST (19)
-+#define FORCE_SUSPENDM_OFST (18)
-+#define FORCE_TERMSEL_OFST (17)
-+#define FORCE_OPMODE_OFST (16)
-+#define UTMI_MUXSEL_OFST (15)
-+#define RG_RESET_OFST (14)
-+#define RG_DATAIN_OFST (10)
-+#define RG_TXVALIDH_OFST (9)
-+#define RG_TXVALID_OFST (8)
-+#define RG_DMPULLDOWN_OFST (7)
-+#define RG_DPPULLDOWN_OFST (6)
-+#define RG_XCVRSEL_OFST (4)
-+#define RG_SUSPENDM_OFST (3)
-+#define RG_TERMSEL_OFST (2)
-+#define RG_OPMODE_OFST (0)
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN_OFST (31)
-+#define RG_USB20_PRBS7_BITCNT_OFST (24)
-+#define RG_USB20_CLK48M_EN_OFST (23)
-+#define RG_USB20_CLK60M_EN_OFST (22)
-+#define RG_UART_I_OFST (19)
-+#define RG_UART_BIAS_EN_OFST (18)
-+#define RG_UART_TX_OE_OFST (17)
-+#define RG_UART_EN_OFST (16)
-+#define FORCE_VBUSVALID_OFST (13)
-+#define FORCE_SESSEND_OFST (12)
-+#define FORCE_BVALID_OFST (11)
-+#define FORCE_AVALID_OFST (10)
-+#define FORCE_IDDIG_OFST (9)
-+#define FORCE_IDPULLUP_OFST (8)
-+#define RG_VBUSVALID_OFST (5)
-+#define RG_SESSEND_OFST (4)
-+#define RG_BVALID_OFST (3)
-+#define RG_AVALID_OFST (2)
-+#define RG_IDDIG_OFST (1)
-+#define RG_IDPULLUP_OFST (0)
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH_OFST (0)
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O_OFST (31)
-+#define RGO_USB20_LB_PASS_OFST (30)
-+#define RGO_USB20_LB_DONE_OFST (29)
-+#define AD_USB20_BVALID_OFST (28)
-+#define USB20_IDDIG_OFST (27)
-+#define AD_USB20_VBUSVALID_OFST (26)
-+#define AD_USB20_SESSEND_OFST (25)
-+#define AD_USB20_AVALID_OFST (24)
-+#define USB20_LINE_STATE_OFST (22)
-+#define USB20_HST_DISCON_OFST (21)
-+#define USB20_TX_READY_OFST (20)
-+#define USB20_RX_ERROR_OFST (19)
-+#define USB20_RX_ACTIVE_OFST (18)
-+#define USB20_RX_VALIDH_OFST (17)
-+#define USB20_RX_VALID_OFST (16)
-+#define USB20_DATA_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT_OFST (24)
-+#define RGO_RXACTIVE_CNT_OFST (16)
-+#define RGO_USB20_LB_BERCNT_OFST (8)
-+#define USB20_PROBE_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
-+#define RGO_USB20_PRBS7_DONE_OFST (3)
-+#define RGO_USB20_PRBS7_LOCK_OFST (2)
-+#define RGO_USB20_PRBS7_PASS_OFST (1)
-+#define RGO_USB20_PRBS7_PASSTH_OFST (0)
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
-+#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
-+#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
-+#define RG_CHGDT_ISRC_LEV_OFST (14)
-+#define RG_CHGDT_VDATSRC_OFST (13)
-+#define RG_CHGDT_BGVREF_SEL_OFST (10)
-+#define RG_CHGDT_RDVREF_SEL_OFST (8)
-+#define RG_CHGDT_ISRC_DP_OFST (7)
-+#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
-+#define RG_CHGDT_VDAT_DM_OFST (5)
-+#define RG_CHGDT_OPOUT_DP_OFST (4)
-+#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
-+#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
-+#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
-+#define RG_CHGDT_EN_OFST (0)
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV_OFST (0)
-+
-+//U3D_REGFCOM
-+#define RG_PAGE_OFST (24)
-+#define I2C_MODE_OFST (16)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg2;
-+ PHY_LE32 reg3;
-+ //0x10
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ //0x20
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ PHY_LE32 rega;
-+ PHY_LE32 regb;
-+ //0x30
-+ PHY_LE32 regc;
-+ PHY_LE32 regd;
-+ PHY_LE32 rege;
-+};
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
-+#define RG_SSUSB_CHPEN (0x1<<30) //30:30
-+#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
-+#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
-+#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
-+#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
-+#define RG_SSUSB_REF_EN (0x1<<15) //15:15
-+#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
-+#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
-+#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
-+#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
-+#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
-+#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
-+#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
-+#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
-+#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
-+#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
-+#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
-+#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
-+#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
-+#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
-+#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
-+#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
-+#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
-+#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
-+#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
-+#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
-+#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
-+#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
-+#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
-+#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
-+#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
-+#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
-+#define RG_SSUSB_TX_SR (0x7<<20) //22:20
-+#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
-+#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
-+#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
-+#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
-+#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
-+#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
-+#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
-+#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
-+#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
-+#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
-+#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
-+#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
-+#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
-+#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
-+#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
-+#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
-+#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
-+#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
-+#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
-+#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
-+#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
-+#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
-+#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
-+#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
-+#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
-+#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
-+#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
-+#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
-+#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
-+#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
-+#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
-+#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
-+#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
-+#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
-+#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
-+#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN_OFST (31)
-+#define RG_SSUSB_CHPEN_OFST (30)
-+#define RG_SSUSB_BG_DIV_OFST (28)
-+#define RG_SSUSB_INTR_EN_OFST (26)
-+#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
-+#define RG_SSUSB_MPX_SEL_OFST (16)
-+#define RG_SSUSB_REF_EN_OFST (15)
-+#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
-+#define RG_SSUSB_BG_RASEL_OFST (9)
-+#define RG_SSUSB_BG_RBSEL_OFST (7)
-+#define RG_SSUSB_BG_MONEN_OFST (6)
-+#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW_OFST (30)
-+#define RG_PCIE_CLKDRV_AMP_OFST (27)
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
-+#define RG_SSUSB_XTAL_MON_EN_OFST (25)
-+#define RG_SSUSB_XTAL_HYS_OFST (24)
-+#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
-+#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
-+#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
-+#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF_OFST (31)
-+#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
-+#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
-+#define RG_SSUSB_SYSPLL_BLP_OFST (20)
-+#define RG_SSUSB_SYSPLL_BP_OFST (19)
-+#define RG_SSUSB_SYSPLL_BR_OFST (18)
-+#define RG_SSUSB_SYSPLL_BC_OFST (17)
-+#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
-+#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
-+#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
-+#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
-+#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
-+#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
-+#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
-+#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
-+#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB_OFST (31)
-+#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
-+#define RG_SSUSB_IDRV_CALIB_OFST (24)
-+#define RG_SSUSB_TX_R50_FON_OFST (23)
-+#define RG_SSUSB_TX_SR_OFST (20)
-+#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
-+#define RG_SSUSB_RXDET_RSEL_OFST (14)
-+#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
-+#define RG_SSUSB_CKMON_EN_OFST (11)
-+#define RG_SSUSB_CKMON_SEL_OFST (8)
-+#define RG_SSUSB_TX_VLMON_EN_OFST (7)
-+#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
-+#define RG_SSUSB_RXLBTX_EN_OFST (5)
-+#define RG_SSUSB_TXLBRX_EN_OFST (4)
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE_OFST (12)
-+#define RG_SSUSB_PLL_CKCTRL_OFST (10)
-+#define RG_SSUSB_PLL_POSDIV_OFST (8)
-+#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
-+#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
-+#define RG_SSUSB_PLL_EP_EN_OFST (5)
-+#define RG_SSUSB_PLL_VOD_EN_OFST (4)
-+#define RG_SSUSB_PLL_V11_EN_OFST (3)
-+#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
-+#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
-+#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
-+#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
-+#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
-+#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
-+#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
-+#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
-+#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
-+#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
-+#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
-+#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
-+#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
-+#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
-+#define RG_SSUSB_CDR_MONMUX_OFST (11)
-+#define RG_SSUSB_CDR_CKCTRL_OFST (9)
-+#define RG_SSUSB_CDR_ACCEN_OFST (8)
-+#define RG_SSUSB_CDR_BYPASS_OFST (6)
-+#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
-+#define RG_SSUSB_CDR_EPEN_OFST (3)
-+#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
-+#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
-+#define RG_SSUSB_CDR_MONEN_OFST (0)
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
-+#define RG_SSUSB_CDR_REGOD_OFST (29)
-+#define RG_SSUSB_RX_DAC_EN_OFST (26)
-+#define RG_SSUSB_RX_DAC_PWD_OFST (25)
-+#define RG_SSUSB_EQ_CURSEL_OFST (24)
-+#define RG_SSUSB_RX_DAC_MUX_OFST (19)
-+#define RG_SSUSB_RX_R2T_EN_OFST (18)
-+#define RG_SSUSB_RX_T2R_EN_OFST (17)
-+#define RG_SSUSB_RX_50_LOWER_OFST (14)
-+#define RG_SSUSB_RX_50_TAR_OFST (12)
-+#define RG_SSUSB_RX_SW_CTRL_OFST (7)
-+#define RG_PCIE_SIGDET_VTH_OFST (5)
-+#define RG_PCIE_SIGDET_LPF_OFST (3)
-+#define RG_SSUSB_LFPS_MON_EN_OFST (2)
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
-+#define RG_SSUSB_CDR_RESERVE_OFST (16)
-+#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
-+#define RG_PCIE_RX_RESERVE_OFST (0)
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
-+#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
-+#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
-+#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
-+#define RG_SSUSB_RX_PD_RST_OFST (1)
-+#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_da_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ //0x10
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ //0x20
-+ PHY_LE32 reg10;
-+ PHY_LE32 reg12;
-+ PHY_LE32 reg13;
-+ PHY_LE32 reg14;
-+ //0x30
-+ PHY_LE32 reg15;
-+ PHY_LE32 reg16;
-+ PHY_LE32 reg19;
-+ PHY_LE32 reg20;
-+ //0x40
-+ PHY_LE32 reg21;
-+ PHY_LE32 reg23;
-+ PHY_LE32 reg25;
-+ PHY_LE32 reg26;
-+ //0x50
-+ PHY_LE32 reg28;
-+ PHY_LE32 reg29;
-+ PHY_LE32 reg30;
-+ PHY_LE32 reg31;
-+ //0x60
-+ PHY_LE32 reg32;
-+ PHY_LE32 reg33;
-+};
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
-+#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
-+#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
-+#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
-+#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
-+#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
-+#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
-+#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
-+#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
-+#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
-+#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
-+#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
-+#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
-+#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
-+#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
-+#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
-+#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
-+#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
-+#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
-+#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
-+#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
-+#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
-+#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
-+#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
-+#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
-+#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
-+#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
-+#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
-+#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
-+#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
-+#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
-+#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
-+#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
-+#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
-+#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
-+#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
-+#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
-+#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
-+#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
-+#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
-+#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
-+#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
-+#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
-+#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
-+#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D_OFST (24)
-+#define RG_PCIE_SPEED_PE2H_OFST (23)
-+#define RG_PCIE_SPEED_PE1D_OFST (22)
-+#define RG_PCIE_SPEED_PE1H_OFST (21)
-+#define RG_PCIE_SPEED_U3_OFST (20)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
-+#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
-+#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
-+#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
-+#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
-+#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
-+#define RG_USB20_REFCK_SEL_U3_OFST (26)
-+#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
-+#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
-+#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
-+#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
-+#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
-+#define RG_PCIE_MODE_PE2D_OFST (8)
-+#define RG_PCIE_MODE_PE2H_OFST (3)
-+#define RG_PCIE_MODE_PE1D_OFST (2)
-+#define RG_PCIE_MODE_PE1H_OFST (1)
-+#define RG_PCIE_MODE_U3_OFST (0)
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
-+#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
-+#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
-+#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
-+#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
-+#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
-+#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
-+#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_BC_U3_OFST (0)
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
-+#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
-+#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
-+#define RG_SSUSB_PLL_BR_U3_OFST (15)
-+#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
-+#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
-+#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
-+#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
-+#define RG_SSUSB_PLL_IC_U3_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_IR_U3_OFST (0)
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_BP_U3_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
-+#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
-+#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
-+#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_BPA_U3_OFST (0)
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BPB_U3_OFST (0)
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BR_U3_OFST (0)
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
-+#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
-+#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
-+#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
-+#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
-+#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
-+#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
-+#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
-+#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
-+#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
-+#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
-+#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
-+#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
-+#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
-+#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
-+#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
-+#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
-+#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
-+#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
-+#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
-+#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
-+#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_reg {
-+ //0x0
-+ PHY_LE32 phyd_mix0;
-+ PHY_LE32 phyd_mix1;
-+ PHY_LE32 phyd_lfps0;
-+ PHY_LE32 phyd_lfps1;
-+ //0x10
-+ PHY_LE32 phyd_impcal0;
-+ PHY_LE32 phyd_impcal1;
-+ PHY_LE32 phyd_txpll0;
-+ PHY_LE32 phyd_txpll1;
-+ //0x20
-+ PHY_LE32 phyd_txpll2;
-+ PHY_LE32 phyd_fl0;
-+ PHY_LE32 phyd_mix2;
-+ PHY_LE32 phyd_rx0;
-+ //0x30
-+ PHY_LE32 phyd_t2rlb;
-+ PHY_LE32 phyd_cppat;
-+ PHY_LE32 phyd_mix3;
-+ PHY_LE32 phyd_ebufctl;
-+ //0x40
-+ PHY_LE32 phyd_pipe0;
-+ PHY_LE32 phyd_pipe1;
-+ PHY_LE32 phyd_mix4;
-+ PHY_LE32 phyd_ckgen0;
-+ //0x50
-+ PHY_LE32 phyd_mix5;
-+ PHY_LE32 phyd_reserved;
-+ PHY_LE32 phyd_cdr0;
-+ PHY_LE32 phyd_cdr1;
-+ //0x60
-+ PHY_LE32 phyd_pll_0;
-+ PHY_LE32 phyd_pll_1;
-+ PHY_LE32 phyd_bcn_det_1;
-+ PHY_LE32 phyd_bcn_det_2;
-+ //0x70
-+ PHY_LE32 eq0;
-+ PHY_LE32 eq1;
-+ PHY_LE32 eq2;
-+ PHY_LE32 eq3;
-+ //0x80
-+ PHY_LE32 eq_eye0;
-+ PHY_LE32 eq_eye1;
-+ PHY_LE32 eq_eye2;
-+ PHY_LE32 eq_dfe0;
-+ //0x90
-+ PHY_LE32 eq_dfe1;
-+ PHY_LE32 eq_dfe2;
-+ PHY_LE32 eq_dfe3;
-+ PHY_LE32 reserve0;
-+ //0xa0
-+ PHY_LE32 phyd_mon0;
-+ PHY_LE32 phyd_mon1;
-+ PHY_LE32 phyd_mon2;
-+ PHY_LE32 phyd_mon3;
-+ //0xb0
-+ PHY_LE32 phyd_mon4;
-+ PHY_LE32 phyd_mon5;
-+ PHY_LE32 phyd_mon6;
-+ PHY_LE32 phyd_mon7;
-+ //0xc0
-+ PHY_LE32 phya_rx_mon0;
-+ PHY_LE32 phya_rx_mon1;
-+ PHY_LE32 phya_rx_mon2;
-+ PHY_LE32 phya_rx_mon3;
-+ //0xd0
-+ PHY_LE32 phya_rx_mon4;
-+ PHY_LE32 phya_rx_mon5;
-+ PHY_LE32 phyd_cppat2;
-+ PHY_LE32 eq_eye3;
-+ //0xe0
-+ PHY_LE32 kband_out;
-+ PHY_LE32 kband_out1;
-+};
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
-+#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
-+#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
-+#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
-+#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
-+#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
-+#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
-+#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
-+#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
-+#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
-+#define RG_SSUSB_COMCNT (0xf<<4) //7:4
-+#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
-+#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
-+#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
-+#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
-+#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
-+#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
-+#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
-+#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
-+#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
-+#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
-+#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
-+#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
-+#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
-+#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
-+#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
-+#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
-+#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
-+#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
-+#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
-+#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
-+#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
-+#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
-+#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
-+#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
-+#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
-+#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
-+#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
-+#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
-+#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
-+#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
-+#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
-+#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
-+#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
-+#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
-+#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
-+#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
-+#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
-+#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
-+#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
-+#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
-+#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
-+#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
-+#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
-+#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
-+#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
-+#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
-+#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
-+#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
-+#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
-+#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
-+#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
-+#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
-+#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
-+#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
-+#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
-+#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
-+#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
-+#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
-+#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
-+#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
-+#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
-+#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
-+#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
-+#define RG_SSUSB_K_EMP (0xf<<20) //23:20
-+#define RG_SSUSB_K_FUL (0xf<<16) //19:16
-+#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
-+#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
-+#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
-+#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
-+#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
-+#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
-+#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
-+#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
-+#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
-+#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
-+#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
-+#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
-+#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
-+#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
-+#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
-+#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
-+#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
-+#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
-+#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
-+#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
-+#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
-+#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
-+#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
-+#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
-+#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
-+#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
-+#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
-+#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
-+#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
-+//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
-+//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
-+#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
-+#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
-+#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
-+#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
-+#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
-+#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
-+#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
-+#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
-+#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
-+#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
-+#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
-+#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
-+#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
-+#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
-+#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
-+#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
-+#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
-+#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
-+#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
-+#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
-+#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
-+#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
-+#define RGS_SSUSB_LFPS (0xf<<12) //15:12
-+#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
-+#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
-+#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
-+#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
-+#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
-+#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
-+#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
-+#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
-+#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
-+#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
-+#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
-+#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
-+#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
-+#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
-+#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
-+#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
-+#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
-+#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
-+#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
-+#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
-+#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
-+#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
-+#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
-+#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
-+#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
-+#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
-+#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
-+#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
-+#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
-+#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
-+#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
-+#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
-+#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG_OFST (31)
-+#define RG_SSUSB_TSEQ_EN_OFST (30)
-+#define RG_SSUSB_TSEQ_POLEN_OFST (29)
-+#define RG_SSUSB_TSEQ_POL_OFST (28)
-+#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
-+#define RG_SSUSB_TSEQ_TH_OFST (24)
-+#define RG_SSUSB_PRBS_BERTH_OFST (16)
-+#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
-+#define RG_SSUSB_PRBS_EN_OFST (13)
-+#define RG_SSUSB_BPSLOCK_OFST (12)
-+#define RG_SSUSB_RTCOMCNT_OFST (8)
-+#define RG_SSUSB_COMCNT_OFST (4)
-+#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN_OFST (31)
-+#define RG_SSUSB_PRBSEL_PCS_OFST (28)
-+#define RG_SSUSB_TXLFPS_PRD_OFST (24)
-+#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
-+#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
-+#define RG_SSUSB_PDNCTL_OFST (16)
-+#define RG_SSUSB_TX_DRV_EN_OFST (15)
-+#define RG_SSUSB_TX_DRV_SEL_OFST (14)
-+#define RG_SSUSB_TX_DRV_DLY_OFST (8)
-+#define RG_SSUSB_BERT_EN_OFST (7)
-+#define RG_SSUSB_SCP_TH_OFST (4)
-+#define RG_SSUSB_SCP_EN_OFST (3)
-+#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD_OFST (30)
-+#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
-+#define RG_SSUSB_RXLFPS_OVF_OFST (24)
-+#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
-+#define RG_SSUSB_P3_ENTRY_OFST (22)
-+#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
-+#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
-+#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
-+#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
-+#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
-+#define RG_SSUSB_RXLFPS_LOB_OFST (8)
-+#define RG_SSUSB_TXLFPS_EN_OFST (7)
-+#define RG_SSUSB_TXLFPS_SEL_OFST (6)
-+#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
-+#define RG_SSUSB_RXLFPS_UPB_OFST (0)
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
-+#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
-+#define RG_SSUSB_FWAKE_TH_OFST (16)
-+#define RG_SSUSB_RXLFPS_UDF_OFST (8)
-+#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
-+#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_TX_IMPSEL_OFST (24)
-+#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
-+#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_RX_IMPSEL_OFST (24)
-+#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
-+#define RG_SSUSB_TXPLL_ON_OFST (26)
-+#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
-+#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
-+#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
-+#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
-+#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
-+#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
-+#define RG_SSUSB_PLL_DDSEN_OFST (25)
-+#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
-+#define RG_SSUSB_PLL_PWD_OFST (23)
-+#define RG_SSUSB_RX_AFE_PWD_OFST (22)
-+#define RG_SSUSB_PLL_TCADJ_OFST (16)
-+#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
-+#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
-+#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
-+#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
-+#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN_OFST (31)
-+#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
-+#define RG_SSUSB_TX_LFPS_OFST (29)
-+#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
-+#define RG_SSUSB_RXPLL_STB_OFST (27)
-+#define RG_SSUSB_TXPLL_STB_OFST (26)
-+#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
-+#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
-+#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
-+#define RG_SSUSB_RXPLL_ON_OFST (10)
-+#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
-+#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
-+#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
-+#define RG_SSUSB_CDR_PWD_OFST (6)
-+#define RG_SSUSB_CDR_TCADJ_OFST (0)
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET_OFST (16)
-+#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST_OFST (31)
-+#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
-+#define RG_SSUSB_RXVAL_RST_OFST (29)
-+#define RG_SSUSB_RXVAL_CNT_OFST (24)
-+#define RG_SSUSB_CDROS_EN_OFST (18)
-+#define RG_SSUSB_CDR_LCKOP_OFST (16)
-+#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
-+#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH_OFST (24)
-+#define RG_SSUSB_T2RLB_PAT_OFST (16)
-+#define RG_SSUSB_T2RLB_EN_OFST (15)
-+#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
-+#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
-+#define RG_SSUSB_T2RLB_MODE_OFST (11)
-+#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
-+#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
-+#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
-+#define RG_SSUSB_RX_DFE_EN_OFST (7)
-+#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
-+#define RG_SSUSB_RX_EQ_EN_OFST (5)
-+#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
-+#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
-+#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
-+#define RG_SSUSB_RX_DFE_RST_OFST (1)
-+#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
-+#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
-+#define RG_SSUSB_BPANSIENC_OFST (26)
-+#define RG_SSUSB_VALID_EN_OFST (25)
-+#define RG_SSUSB_EBUF_SRST_OFST (24)
-+#define RG_SSUSB_K_EMP_OFST (20)
-+#define RG_SSUSB_K_FUL_OFST (16)
-+#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
-+#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
-+#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
-+#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
-+#define RG_SSUSB_CPPAT_TOZ_OFST (21)
-+#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
-+#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
-+#define RG_SSUSB_P_CDROS_EN_OFST (30)
-+#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
-+#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
-+#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
-+#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
-+#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
-+#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
-+#define RG_SSUSB_PLL_SSCEN_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
-+#define RG_SSUSB_CDR_PI_PWD_OFST (12)
-+#define RG_SSUSB_CDR_PI_MODE_OFST (11)
-+#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL_OFST (0)
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION_OFST (30)
-+#define RG_SSUSB_RXEQTRAINING_OFST (29)
-+#define RG_SSUSB_RXPOLARITY_OFST (28)
-+#define RG_SSUSB_TXDEEMPH_OFST (26)
-+#define RG_SSUSB_POWERDOWN_OFST (24)
-+#define RG_SSUSB_TXONESZEROS_OFST (23)
-+#define RG_SSUSB_TXELECIDLE_OFST (22)
-+#define RG_SSUSB_TXDETECTRX_OFST (21)
-+#define RG_SSUSB_PIPE_SEL_OFST (20)
-+#define RG_SSUSB_TXDATAK_OFST (16)
-+#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
-+#define RG_SSUSB_CDR_STABLE_OFST (14)
-+#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
-+#define RG_SSUSB_CDR_RSTB_OFST (12)
-+#define RG_SSUSB_P_ERROR_SEL_OFST (4)
-+#define RG_SSUSB_TXMARGIN_OFST (1)
-+#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA_OFST (0)
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT_OFST (24)
-+#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
-+#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
-+#define RG_SSUSB_TFIFO_PSEL_OFST (24)
-+#define RG_SSUSB_CKGEN_PSEL_OFST (8)
-+#define RG_SSUSB_RXCK_INV_OFST (0)
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE_OFST (0)
-+//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
-+//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_CDR_BW_SEL_OFST (6)
-+#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
-+#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
-+#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
-+#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
-+#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
-+#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
-+#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RG_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
-+#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
-+#define RG_SSUSB_BCN_DET_DIS_OFST (12)
-+#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_STOPTIME_OFST (14)
-+#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
-+#define RG_SSUSB_EQ_STARTTIME_OFST (6)
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
-+#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
-+#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
-+#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
-+#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
-+#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
-+#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
-+#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
-+#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
-+#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET_OFST (24)
-+#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
-+#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
-+#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
-+#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX_OFST (28)
-+#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
-+#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
-+#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
-+#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
-+#define RG_SSUSB_EQ_PI90_INI_OFST (8)
-+#define RG_SSUSB_EQ_PI0_INI_OFST (0)
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV_OFST (16)
-+#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
-+#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
-+#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
-+#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
-+#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
-+#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
-+#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL_OFST (24)
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
-+#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED_OFST (0)
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC_OFST (16)
-+#define RGS_SSUSB_LFPS_OFST (12)
-+#define RGS_SSUSB_TRAINDEC_OFST (8)
-+#define RGS_SSUSB_SCP_PAT_OFST (0)
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT_OFST (0)
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
-+#define RGS_SSUSB_RETRACK_OFST (12)
-+#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
-+#define RGS_SSUSB_PDNCTL_OFST (0)
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
-+#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
-+#define RGS_SSUSB_SCP_DETCNT_OFST (16)
-+#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG_OFST (16)
-+#define RGS_SSUSB_BERT_LOCK_OFST (15)
-+#define RGS_SSUSB_SCP_DET_OFST (14)
-+#define RGS_SSUSB_TSEQ_DET_OFST (13)
-+#define RGS_SSUSB_EBUF_UDF_OFST (12)
-+#define RGS_SSUSB_EBUF_OVF_OFST (11)
-+#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
-+#define RGS_SSUSB_PRBS_PASS_OFST (9)
-+#define RGS_SSUSB_PRBS_LOCK_OFST (8)
-+#define RGS_SSUSB_T2RLB_ERR_OFST (6)
-+#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
-+#define RGS_SSUSB_T2RLB_PASS_OFST (4)
-+#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
-+#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
-+#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
-+#define RGS_SSUSB_RXDETECTED_OFST (0)
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
-+#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
-+#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
-+#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
-+#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
-+#define RGS_SSUSB_TFIFO_MSG_OFST (4)
-+#define RGS_SSUSB_RFIFO_MSG_OFST (0)
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT_OFST (8)
-+#define RGS_SSUSB_PRB_OUT_OFST (0)
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
-+#define RGS_SSUSB_EQ_DCD0H_OFST (16)
-+#define RGS_SSUSB_EQ_DCD0L_OFST (8)
-+#define RGS_SSUSB_EQ_DCD1H_OFST (0)
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L_OFST (24)
-+#define RGS_SSUSB_EQ_DCE0_OFST (16)
-+#define RGS_SSUSB_EQ_DCE1_OFST (8)
-+#define RGS_SSUSB_EQ_DCHHL_OFST (0)
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
-+#define RGS_SSUSB_EQ_DCLHL_OFST (24)
-+#define RGS_SSUSB_EQ_STATUS_OFST (16)
-+#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
-+#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
-+#define RGS_SSUSB_EQ_PILPO_OFST (0)
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
-+#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
-+#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
-+#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_bank2_reg {
-+ //0x0
-+ PHY_LE32 b2_phyd_top1;
-+ PHY_LE32 b2_phyd_top2;
-+ PHY_LE32 b2_phyd_top3;
-+ PHY_LE32 b2_phyd_top4;
-+ //0x10
-+ PHY_LE32 b2_phyd_top5;
-+ PHY_LE32 b2_phyd_top6;
-+ PHY_LE32 b2_phyd_top7;
-+ PHY_LE32 b2_phyd_p_sigdet1;
-+ //0x20
-+ PHY_LE32 b2_phyd_p_sigdet2;
-+ PHY_LE32 b2_phyd_p_sigdet_cal1;
-+ PHY_LE32 b2_phyd_rxdet1;
-+ PHY_LE32 b2_phyd_rxdet2;
-+ //0x30
-+ PHY_LE32 b2_phyd_misc0;
-+ PHY_LE32 b2_phyd_misc2;
-+ PHY_LE32 b2_phyd_misc3;
-+ PHY_LE32 reserve0;
-+ //0x40
-+ PHY_LE32 b2_rosc_0;
-+ PHY_LE32 b2_rosc_1;
-+ PHY_LE32 b2_rosc_2;
-+ PHY_LE32 b2_rosc_3;
-+ //0x50
-+ PHY_LE32 b2_rosc_4;
-+ PHY_LE32 b2_rosc_5;
-+ PHY_LE32 b2_rosc_6;
-+ PHY_LE32 b2_rosc_7;
-+ //0x60
-+ PHY_LE32 b2_rosc_8;
-+ PHY_LE32 b2_rosc_9;
-+ PHY_LE32 b2_rosc_a;
-+ PHY_LE32 reserve1;
-+ //0x70~0xd0
-+ PHY_LE32 reserve2[28];
-+ //0xe0
-+ PHY_LE32 phyd_version;
-+ PHY_LE32 phyd_model;
-+};
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
-+#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
-+#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
-+#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
-+#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
-+#define RG_SSUSB_RATE (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
-+#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
-+#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
-+#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
-+#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
-+#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
-+#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
-+#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
-+#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
-+#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
-+#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
-+#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
-+#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
-+#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
-+#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
-+#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
-+#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
-+#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
-+#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
-+#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
-+#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
-+#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
-+#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
-+#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
-+#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
-+#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
-+#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
-+#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
-+#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
-+#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
-+#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
-+#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
-+#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
-+#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
-+#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
-+#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
-+#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
-+#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
-+#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
-+#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
-+#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
-+#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
-+#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
-+#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
-+#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
-+#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
-+#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
-+#define RG_SSUSB_SIGDET_EN_OFST (15)
-+#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_CLKRX_EN_OFST (13)
-+#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
-+#define RG_SSUSB_CLKTX_EN_OFST (11)
-+#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
-+#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
-+#define RG_SSUSB_RATE_OFST (6)
-+#define RG_SSUSB_FORCE_RATE_OFST (5)
-+#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
-+#define RG_SSUSB_PHY_MODE_OFST (1)
-+#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
-+#define RG_SSUSB_IDRV_6DB_OFST (24)
-+#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
-+#define RG_SSUSB_IDEM_3P5DB_OFST (16)
-+#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
-+#define RG_SSUSB_IDRV_3P5DB_OFST (8)
-+#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
-+#define RG_SSUSB_IDRV_0DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI_OFST (25)
-+#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
-+#define RG_SSUSB_TX_BIASI_EN_OFST (16)
-+#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
-+#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
-+#define RG_SSUSB_IDEM_6DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
-+#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
-+#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
-+#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
-+#define RG_SSUSB_P_SIGDET_REK_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
-+#define RG_SSUSB_FORCE_CMDET_OFST (30)
-+#define RG_SSUSB_RXDET_EN_OFST (29)
-+#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
-+#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
-+#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
-+#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
-+#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
-+#define RG_SSUSB_PDN_T_SEL_OFST (18)
-+#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
-+#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
-+#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
-+#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
-+#define RG_SSUSB_LFPS_PSEL_OFST (15)
-+#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
-+#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
-+#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
-+#define RG_SSUSB_T2RLB_PSEL_OFST (8)
-+#define RG_SSUSB_PPCTL_PSEL_OFST (5)
-+#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
-+#define RG_SSUSB_BERTLB_PSEL_OFST (2)
-+#define RG_SSUSB_RETRACK_DIS_OFST (1)
-+#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
-+#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
-+#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
-+#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
-+#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
-+#define RGS_SSUSB_PPERRCNT_OFST (0)
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
-+#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
-+#define RG_SSUSB_RING_OSC_EN_OFST (3)
-+#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
-+#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
-+#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
-+#define RG_SSUSB_RING_OSC_P3_OFST (19)
-+#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
-+#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
-+#define RG_SSUSB_RING_OSC_SEL_OFST (8)
-+#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
-+#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE_OFST (16)
-+#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
-+#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
-+#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT_OFST (16)
-+#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
-+#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
-+#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION_OFST (0)
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_chip_reg {
-+ PHY_LE32 xtalbias;
-+ PHY_LE32 syspll1;
-+ PHY_LE32 gpio_ctla;
-+ PHY_LE32 gpio_ctlb;
-+ PHY_LE32 gpio_ctlc;
-+};
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
-+
-+/* OFFSET */
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA_OFST (0)
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB_OFST (0)
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_fm_feg {
-+ //0x0
-+ PHY_LE32 fmcr0;
-+ PHY_LE32 fmcr1;
-+ PHY_LE32 fmcr2;
-+ PHY_LE32 fmmonr0;
-+ //0x10
-+ PHY_LE32 fmmonr1;
-+};
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH (0xf<<28) //31:28
-+#define RG_MONCLK_SEL (0x3<<26) //27:26
-+#define RG_FM_MODE (0x1<<25) //25:25
-+#define RG_FREQDET_EN (0x1<<24) //24:24
-+#define RG_CYCLECNT (0xffffff<<0) //23:0
-+
-+//U3D_FMCR1
-+#define RG_TARGET (0xffffffff<<0) //31:0
-+
-+//U3D_FMCR2
-+#define RG_OFFSET (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
-+#define RG_FRCK_EN (0x1<<8) //8:8
-+#define USBPLL_LOCK (0x1<<1) //1:1
-+#define USB_FM_VLD (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH_OFST (28)
-+#define RG_MONCLK_SEL_OFST (26)
-+#define RG_FM_MODE_OFST (25)
-+#define RG_FREQDET_EN_OFST (24)
-+#define RG_CYCLECNT_OFST (0)
-+
-+//U3D_FMCR1
-+#define RG_TARGET_OFST (0)
-+
-+//U3D_FMCR2
-+#define RG_OFFSET_OFST (0)
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT_OFST (0)
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3_OFST (9)
-+#define RG_FRCK_EN_OFST (8)
-+#define USBPLL_LOCK_OFST (1)
-+#define USB_FM_VLD_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+PHY_INT32 phy_init(struct u3phy_info *info);
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+PHY_INT32 eyescan_init(struct u3phy_info *info);
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
-+
-+#endif
-+#endif
-Index: linux-3.10.44/drivers/usb/host/mtk-phy-ahb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/mtk-phy-ahb.c 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,58 @@
-+#include "mtk-phy.h"
-+#ifdef CONFIG_U3D_HAL_SUPPORT
-+#include "mu3d_hal_osal.h"
-+#endif
-+
-+#ifdef CONFIG_U3_PHY_AHB_SUPPORT
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+
-+#ifndef CONFIG_U3D_HAL_SUPPORT
-+#define os_writel(addr,data) {\
-+ (*((volatile PHY_UINT32*)(addr)) = data);\
-+ }
-+#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
-+#define os_writelmsk(addr, data, msk) \
-+ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
-+ }
-+#define os_setmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) | msk); \
-+ }
-+#define os_clrmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) &~ msk); \
-+ }
-+/*msk the data first, then umsk with the umsk.*/
-+#define os_writelmskumsk(addr, data, msk, umsk) \
-+{\
-+ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
-+}
-+
-+#endif
-+
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
-+{
-+ os_writel(addr, data);
-+
-+ return 0;
-+}
-+
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
-+{
-+ return os_readl(addr);
-+}
-+
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
-+{
-+ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
-+
-+ return 0;
-+}
-+
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
-+{
-+ return ((os_readl(addr)>>((addr%4)*8))&0xff);
-+}
-+
-+#endif
-+
-Index: linux-3.10.44/drivers/usb/host/mtk-phy.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/mtk-phy.c 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,102 @@
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#define U3_PHY_LIB
-+#include "mtk-phy.h"
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+#endif
-+#ifdef CONFIG_PROJECT_PHY
-+static struct u3phy_operator project_operators = {
-+ .init = phy_init,
-+ .change_pipe_phase = phy_change_pipe_phase,
-+ .eyescan_init = eyescan_init,
-+ .eyescan = phy_eyescan,
-+ .u2_slew_rate_calibration = u2_slew_rate_calibration,
-+};
-+#endif
-+
-+
-+PHY_INT32 u3phy_init(){
-+#ifndef CONFIG_PROJECT_PHY
-+ PHY_INT32 u3phy_version;
-+#endif
-+
-+ if(u3phy != NULL){
-+ return PHY_TRUE;
-+ }
-+
-+ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#endif
-+#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
-+ u3phy->phyd_version_addr = 0x2000e4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = 0x2000e4;
-+#endif
-+#else
-+ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
-+#endif
-+#endif
-+
-+#ifdef CONFIG_PROJECT_PHY
-+
-+ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
-+ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
-+ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
-+ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
-+ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
-+ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+ u3phy_ops = &project_operators;
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
-+ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
-+ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
-+ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
-+ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
-+ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+#endif
-+#endif
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT8 cur_value;
-+ PHY_INT8 new_value;
-+
-+ cur_value = U3PhyReadReg8(addr);
-+ new_value = (cur_value & (~mask)) | (value << offset);
-+ //udelay(i2cdelayus);
-+ U3PhyWriteReg8(addr, new_value);
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT32 cur_value;
-+ PHY_INT32 new_value;
-+
-+ cur_value = U3PhyReadReg32(addr);
-+ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
-+ U3PhyWriteReg32(addr, new_value);
-+ //DRV_MDELAY(100);
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg8(addr) & mask) >> offset);
-+}
-+
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg32(addr) & mask) >> offset);
-+}
-+
-Index: linux-3.10.44/drivers/usb/host/mtk-phy.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/mtk-phy.h 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,179 @@
-+#ifndef __MTK_PHY_NEW_H
-+#define __MTK_PHY_NEW_H
-+
-+//#define CONFIG_U3D_HAL_SUPPORT
-+
-+/* include system library */
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+/* Choose PHY R/W implementation */
-+//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
-+#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
-+
-+/* Choose PHY version */
-+//Select your project by defining one of the followings
-+#define CONFIG_PROJECT_7621 //7621
-+#define CONFIG_PROJECT_PHY
-+
-+/* BASE ADDRESS DEFINE, should define this on ASIC */
-+#define PHY_BASE 0xBE1D0000
-+#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
-+#define U2_PHY_BASE (PHY_BASE+0x800)
-+#define U3_PHYD_BASE (PHY_BASE+0x900)
-+#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
-+#define U3_PHYA_BASE (PHY_BASE+0xb00)
-+#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
-+#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
-+#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
-+#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
-+#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
-+#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
-+#endif
-+
-+/*
-+
-+0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
-+0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
-+0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
-+0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
-+0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
-+0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
-+0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
-+*/
-+
-+
-+/* TYPE DEFINE */
-+typedef unsigned int PHY_UINT32;
-+typedef int PHY_INT32;
-+typedef unsigned short PHY_UINT16;
-+typedef short PHY_INT16;
-+typedef unsigned char PHY_UINT8;
-+typedef char PHY_INT8;
-+
-+typedef PHY_UINT32 __bitwise PHY_LE32;
-+
-+/* CONSTANT DEFINE */
-+#define PHY_FALSE 0
-+#define PHY_TRUE 1
-+
-+/* MACRO DEFINE */
-+#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
-+#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
-+
-+#define DRV_MDELAY mdelay
-+#define DRV_MSLEEP msleep
-+#define DRV_UDELAY udelay
-+#define DRV_USLEEP usleep
-+
-+/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
-+
-+/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+
-+struct u3phy_info {
-+ PHY_INT32 phy_version;
-+ PHY_INT32 phyd_version_addr;
-+
-+#ifdef CONFIG_PROJECT_PHY
-+ struct u2phy_reg *u2phy_regs;
-+ struct u3phya_reg *u3phya_regs;
-+ struct u3phya_da_reg *u3phya_da_regs;
-+ struct u3phyd_reg *u3phyd_regs;
-+ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
-+ struct sifslv_chip_reg *sifslv_chip_regs;
-+ struct sifslv_fm_feg *sifslv_fm_regs;
-+#endif
-+};
-+
-+struct u3phy_operator {
-+ PHY_INT32 (*init) (struct u3phy_info *info);
-+ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
-+ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
-+};
-+
-+#ifdef U3_PHY_LIB
-+#define AUTOEXT
-+#else
-+#define AUTOEXT extern
-+#endif
-+
-+AUTOEXT struct u3phy_info *u3phy;
-+AUTOEXT struct u3phy_info *u3phy_p1;
-+AUTOEXT struct u3phy_operator *u3phy_ops;
-+
-+/*********eye scan required*********/
-+
-+#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
-+#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
-+
-+typedef enum
-+{
-+ SCAN_UP,
-+ SCAN_DN
-+} enumScanDir;
-+
-+struct strucScanRegion
-+{
-+ PHY_INT8 bX_tl;
-+ PHY_INT8 bY_tl;
-+ PHY_INT8 bX_br;
-+ PHY_INT8 bY_br;
-+ PHY_INT8 bDeltaX;
-+ PHY_INT8 bDeltaY;
-+};
-+
-+struct strucTestCycle
-+{
-+ PHY_UINT16 wEyeCnt;
-+ PHY_INT8 bNumOfEyeCnt;
-+ PHY_INT8 bPICalEn;
-+ PHY_INT8 bNumOfIgnoreCnt;
-+};
-+
-+#define ERRCNT_MAX 128
-+#define CYCLE_COUNT_MAX 15
-+
-+/// the map resolution is 128 x 128 pts
-+#define MAX_X 127
-+#define MAX_Y 127
-+#define MIN_X 0
-+#define MIN_Y 0
-+
-+PHY_INT32 u3phy_init(void);
-+
-+AUTOEXT struct strucScanRegion _rEye1;
-+AUTOEXT struct strucScanRegion _rEye2;
-+AUTOEXT struct strucTestCycle _rTestCycle;
-+AUTOEXT PHY_UINT8 _bXcurr;
-+AUTOEXT PHY_UINT8 _bYcurr;
-+AUTOEXT enumScanDir _eScanDir;
-+AUTOEXT PHY_INT8 _fgXChged;
-+AUTOEXT PHY_INT8 _bPIResult;
-+/* use local variable instead to save memory use */
-+#if 0
-+AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+#endif
-+
-+/***********************************/
-+#endif
-+
-Index: linux-3.10.44/drivers/usb/host/pci-quirks.h
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/pci-quirks.h 2014-07-02 11:20:14.589675072 +0100
-+++ linux-3.10.44/drivers/usb/host/pci-quirks.h 2014-07-02 11:20:15.821675026 +0100
-@@ -1,7 +1,7 @@
- #ifndef __LINUX_USB_PCI_QUIRKS_H
- #define __LINUX_USB_PCI_QUIRKS_H
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
- #endif /* CONFIG_PCI */
-Index: linux-3.10.44/drivers/usb/host/xhci-dbg.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci-dbg.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci-dbg.c 2014-07-02 11:20:15.821675026 +0100
-@@ -21,6 +21,9 @@
- */
-
- #include "xhci.h"
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include "xhci-mtk.h"
-+#endif
-
- #define XHCI_INIT_VALUE 0x0
-
-Index: linux-3.10.44/drivers/usb/host/xhci-mem.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci-mem.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci-mem.c 2014-07-02 11:20:15.821675026 +0100
-@@ -65,6 +65,9 @@
-
- static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
- {
-+ if (!seg)
-+ return;
-+
- if (seg->trbs) {
- dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
- seg->trbs = NULL;
-@@ -1446,9 +1449,17 @@
- max_burst = (usb_endpoint_maxp(&ep->desc)
- & 0x1800) >> 11;
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- case USB_SPEED_FULL:
- case USB_SPEED_LOW:
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- default:
- BUG();
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk-power.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk-power.c 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,115 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+static int g_num_u3_port;
-+static int g_num_u2_port;
-+
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci){
-+ int i;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=1; i<=g_num_u3_port; i++){
-+ port_id=i;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = xhci_readl(xhci, addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ xhci_writel(xhci, temp, addr);
-+ }
-+ for(i=1; i<=g_num_u2_port; i++){
-+ port_id=i+g_num_u3_port;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = xhci_readl(xhci, addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ xhci_writel(xhci, temp, addr);
-+ }
-+}
-+
-+void enableAllClockPower(){
-+
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ //2. Enable xHC
-+ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ //1. Enable target ports
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ msleep(100);
-+}
-+
-+
-+//(X)disable clock/power of a port
-+//(X)if all ports are disabled, disable IP ctrl power
-+//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
-+//and IP could be disable if suspended.
-+//If doesn't not disable all ports at first, the IP clock/power will never be disabled
-+//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void disablePortClockPower(void){
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp | (SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp | (SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+}
-+
-+//if IP ctrl power is disabled, enable it
-+//enable clock/power of a port
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void enablePortClockPower(int port_index, int port_rev){
-+ int i;
-+ u32 temp;
-+
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ if(port_rev == 0x3){
-+ temp = readl(SSUSB_U3_CTRL(port_index));
-+ temp = temp & (~SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(port_index));
-+ }
-+ else if(port_rev == 0x2){
-+ temp = readl(SSUSB_U2_CTRL(port_index));
-+ temp = temp & (~SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(port_index));
-+ }
-+}
-+
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk-power.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk-power.h 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,13 @@
-+#ifndef _XHCI_MTK_POWER_H
-+#define _XHCI_MTK_POWER_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+#include "xhci-mtk.h"
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci);
-+void enableAllClockPower(void);
-+void disablePortClockPower(void);
-+void enablePortClockPower(int port_index, int port_rev);
-+
-+#endif
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk-scheduler.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk-scheduler.c 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,608 @@
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+
-+static struct sch_ep **ss_out_eps[MAX_EP_NUM];
-+static struct sch_ep **ss_in_eps[MAX_EP_NUM];
-+static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
-+static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
-+
-+
-+int mtk_xhci_scheduler_init(void){
-+ int i;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_out_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_in_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ hs_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ tt_intr_eps[i] = NULL;
-+ }
-+ return 0;
-+}
-+
-+int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
-+ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
-+
-+ struct sch_ep **ep_array;
-+ int i;
-+
-+ if(is_in && dev_speed == USB_SPEED_SUPER ){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER){
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ if(ep_array[i] == NULL){
-+ tmp_ep->dev_speed = dev_speed;
-+ tmp_ep->isTT = isTT;
-+ tmp_ep->is_in = is_in;
-+ tmp_ep->ep_type = ep_type;
-+ tmp_ep->maxp = maxp;
-+ tmp_ep->interval = interval;
-+ tmp_ep->burst = burst;
-+ tmp_ep->mult = mult;
-+ tmp_ep->offset = offset;
-+ tmp_ep->repeat = repeat;
-+ tmp_ep->pkts = pkts;
-+ tmp_ep->cs_count = cs_count;
-+ tmp_ep->burst_mode = burst_mode;
-+ tmp_ep->bw_cost = bw_cost;
-+ tmp_ep->ep = ep;
-+ ep_array[i] = tmp_ep;
-+ return SCH_SUCCESS;
-+ }
-+ }
-+ return SCH_FAIL;
-+}
-+
-+int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
-+ , int td_size){
-+ int i, j, k;
-+ int bw_required[3];
-+ int final_bw_required;
-+ int bw_required_per_repeat;
-+ int tmp_bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ struct sch_ep **ep_array;
-+ int cur_offset;
-+ int cur_ep_offset;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_repeat;
-+ int ep_mult;
-+
-+ if(is_in){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+
-+ bw_required[0] = 0;
-+ bw_required[1] = 0;
-+ bw_required[2] = 0;
-+
-+ if(repeat == 0){
-+ final_bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_mult);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ final_bw_required += td_size;
-+ }
-+ else{
-+ bw_required_per_repeat = maxp * (burst+1);
-+ for(j=0; j<=mult; j++){
-+ tmp_bw_required = 0;
-+ cur_offset = offset+(j*repeat);
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_repeat);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ bw_required[j] = tmp_bw_required;
-+ }
-+ final_bw_required = SS_BW_BOUND;
-+ for(j=0; j<=mult; j++){
-+ if(bw_required[j] < final_bw_required){
-+ final_bw_required = bw_required[j];
-+ }
-+ }
-+ final_bw_required += bw_required_per_repeat;
-+ }
-+ return final_bw_required;
-+}
-+
-+int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
-+ int i;
-+ int bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int cur_tt_isoc_interval; //for isoc tt check
-+
-+ bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+
-+ cur_sch_ep = (struct sch_ep *)hs_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+ }
-+ else{
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += td_size;
-+ return bw_required;
-+}
-+
-+int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
-+ char is_cs;
-+ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
-+ int bw_required, max_bw;
-+ int ss_cs_count;
-+ int cs_mframe;
-+ int max_frame;
-+ int i,j;
-+ struct sch_ep *cur_sch_ep;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_cs_count;
-+ int tt_isoc_interval; //for isoc tt check
-+ int cur_tt_isoc_interval; //for isoc tt check
-+ int tmp_offset;
-+ int tmp_interval;
-+
-+ is_cs = 0;
-+
-+ tt_isoc_interval = interval<<3; //frame to mframe
-+ if(is_in){
-+ is_cs = 1;
-+ }
-+ s_frame = offset/8;
-+ s_mframe = offset%8;
-+ ss_cs_count = (maxp + (188 - 1))/188;
-+ if(is_cs){
-+ cs_mframe = offset%8 + 2 + ss_cs_count;
-+ if (cs_mframe <= 6)
-+ ss_cs_count += 2;
-+ else if (cs_mframe == 7)
-+ ss_cs_count++;
-+ else if (cs_mframe > 8)
-+ return -1;
-+ }
-+ max_bw = 0;
-+ if(is_in){
-+ i=2;
-+ }
-+ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
-+ bw_required = 0;
-+ for(j=0; j<MAX_EP_NUM; j++){
-+ cur_sch_ep = (struct sch_ep *)hs_eps[j];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //isoc tt
-+ //check if mframe offset overlap
-+ //if overlap, add 188 to the bw
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(cur_tt_isoc_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+
-+ }
-+ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //check if mframe
-+ if(ep_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += 188;
-+ if(bw_required > max_bw){
-+ max_bw = bw_required;
-+ }
-+ }
-+ return max_bw;
-+}
-+
-+int count_tt_intr_bw(int interval, int frame_offset){
-+ //check all eps in tt_intr_eps
-+ int ret;
-+ int i,j;
-+ int ep_offset;
-+ int ep_interval;
-+ int tmp_offset;
-+ int tmp_interval;
-+ ret = SCH_SUCCESS;
-+ struct sch_ep *cur_sch_ep;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - frame_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = frame_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+
-+ if(tmp_offset%tmp_interval==0){
-+ return SCH_FAIL;
-+ }
-+ }
-+ return SCH_SUCCESS;
-+}
-+
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
-+ int i;
-+ struct sch_ep **ep_array;
-+ struct sch_ep *cur_ep;
-+
-+ if (is_in && dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else {
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for (i = 0; i < MAX_EP_NUM; i++) {
-+ cur_ep = (struct sch_ep *)ep_array[i];
-+ if(cur_ep != NULL && cur_ep->ep == ep){
-+ ep_array[i] = NULL;
-+ return cur_ep;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
-+ mtk_u32 bPkts = 0;
-+ mtk_u32 bCsCount = 0;
-+ mtk_u32 bBm = 1;
-+ mtk_u32 bOffset = 0;
-+ mtk_u32 bRepeat = 0;
-+ int ret;
-+ struct mtk_xhci_ep_ctx *temp_ep_ctx;
-+ int td_size;
-+ int mframe_idx, frame_idx;
-+ int bw_cost;
-+ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
-+ int cur_offset, cs_mframe;
-+ int break_out;
-+ int frame_interval;
-+
-+ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
-+ , interval, burst, mult, ep, ep_ctx, sch_ep);
-+ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
-+ frame_interval = interval >> 3;
-+ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
-+ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
-+ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
-+ printk(KERN_ERR "check OK............\n");
-+ bOffset = frame_idx<<3;
-+ bPkts = 1;
-+ bCsCount = 3;
-+ bw_cost = maxp;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ break;
-+ }
-+ }
-+ }
-+ else if(isTT && ep_type == USB_EP_ISOC){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp;
-+ break_out = 0;
-+ frame_interval = interval>>3;
-+ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
-+ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
-+ cur_offset = (frame_idx*8) + mframe_idx;
-+ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = 1;
-+ bCsCount = (maxp + (188 - 1)) / 188;
-+ if(is_in){
-+ cs_mframe = bOffset%8 + 2 + bCsCount;
-+ if (cs_mframe <= 6)
-+ bCsCount += 2;
-+ else if (cs_mframe == 7)
-+ bCsCount++;
-+ }
-+ bw_cost = 188;
-+ bRepeat = 0;
-+ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp*(burst+1);
-+ for(cur_offset = 0; cur_offset<interval; cur_offset++){
-+ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break;
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = burst + 1;
-+ bCsCount = 0;
-+ bw_cost = td_size;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = SS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp * (mult+1) * (burst+1);
-+ if(mult == 0){
-+ max_repeat = 0;
-+ }
-+ else{
-+ max_repeat = (interval-1)/(mult+1);
-+ }
-+ break_out = 0;
-+ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
-+ for(repeat = max_repeat; repeat >= 0; repeat--){
-+ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
-+ , repeat, td_size);
-+ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
-+ , frame_idx, repeat, td_size, cur_bw);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = frame_idx;
-+ best_bw_repeat = repeat;
-+ best_bw = cur_bw;
-+ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bCsCount = 0;
-+ bRepeat = best_bw_repeat;
-+ if(bRepeat == 0){
-+ bw_cost = (burst+1)*(mult+1)*maxp;
-+ bPkts = (burst+1)*(mult+1);
-+ }
-+ else{
-+ bw_cost = (burst+1)*maxp;
-+ bPkts = (burst+1);
-+ }
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else{
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ if(ret == SCH_SUCCESS){
-+ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
-+ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
-+ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
-+
-+ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
-+ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
-+ return SCH_SUCCESS;
-+ }
-+ else{
-+ return SCH_FAIL;
-+ }
-+}
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk-scheduler.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk-scheduler.h 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,77 @@
-+#ifndef _XHCI_MTK_SCHEDULER_H
-+#define _XHCI_MTK_SCHEDULER_H
-+
-+#define MTK_SCH_NEW 1
-+
-+#define SCH_SUCCESS 1
-+#define SCH_FAIL 0
-+
-+#define MAX_EP_NUM 64
-+#define SS_BW_BOUND 51000
-+#define HS_BW_BOUND 6144
-+
-+#define USB_EP_CONTROL 0
-+#define USB_EP_ISOC 1
-+#define USB_EP_BULK 2
-+#define USB_EP_INT 3
-+
-+#define USB_SPEED_LOW 1
-+#define USB_SPEED_FULL 2
-+#define USB_SPEED_HIGH 3
-+#define USB_SPEED_SUPER 5
-+
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+
-+
-+#if 1
-+typedef unsigned int mtk_u32;
-+typedef unsigned long long mtk_u64;
-+#endif
-+
-+#define NULL ((void *)0)
-+
-+struct mtk_xhci_ep_ctx {
-+ mtk_u32 ep_info;
-+ mtk_u32 ep_info2;
-+ mtk_u64 deq;
-+ mtk_u32 tx_info;
-+ /* offset 0x14 - 0x1f reserved for HC internal use */
-+ mtk_u32 reserved[3];
-+};
-+
-+
-+struct sch_ep
-+{
-+ //device info
-+ int dev_speed;
-+ int isTT;
-+ //ep info
-+ int is_in;
-+ int ep_type;
-+ int maxp;
-+ int interval;
-+ int burst;
-+ int mult;
-+ //scheduling info
-+ int offset;
-+ int repeat;
-+ int pkts;
-+ int cs_count;
-+ int burst_mode;
-+ //other
-+ int bw_cost; //bandwidth cost in each repeat; including overhead
-+ mtk_u32 *ep; //address of usb_endpoint pointer
-+};
-+
-+int mtk_xhci_scheduler_init(void);
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
-+
-+
-+#endif
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk.c 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,265 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include "mtk-phy.h"
-+#ifdef CONFIG_C60802_SUPPORT
-+#include "mtk-phy-c60802.h"
-+#endif
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+
-+void setInitialReg(void )
-+{
-+ __u32 __iomem *addr;
-+ u32 temp;
-+
-+ /* set SSUSB DMA burst size to 128B */
-+ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
-+ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
-+ writel(temp, addr);
-+
-+ /* extend U3 LTSSM Polling.LFPS timeout value */
-+ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
-+ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
-+ writel(temp, addr);
-+
-+ /* EOF */
-+ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
-+ temp = SYNC_HS_EOF_VALUE;
-+ writel(temp, addr);
-+
-+#if defined (CONFIG_PERIODIC_ENP)
-+ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
-+ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
-+ writel(temp, addr);
-+#endif
-+
-+ /* Doorbell handling */
-+ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
-+ temp = 0x1;
-+ writel(temp, addr);
-+
-+ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
-+ /* Port 0 */
-+ addr = U2_PHY_BASE + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+
-+ /* Port 1 */
-+ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+}
-+
-+
-+void setLatchSel(void){
-+ __u32 __iomem *latch_sel_addr;
-+ u32 latch_sel_value;
-+ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
-+ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
-+ writel(latch_sel_value, latch_sel_addr);
-+}
-+
-+void reinitIP(void){
-+ __u32 __iomem *ip_reset_addr;
-+ u32 ip_reset_value;
-+
-+ enableAllClockPower();
-+ mtk_xhci_scheduler_init();
-+}
-+
-+void dbg_prb_out(void){
-+ mtk_probe_init(0x0f0f0f0f);
-+ mtk_probe_out(0xffffffff);
-+ mtk_probe_out(0x01010101);
-+ mtk_probe_out(0x02020202);
-+ mtk_probe_out(0x04040404);
-+ mtk_probe_out(0x08080808);
-+ mtk_probe_out(0x10101010);
-+ mtk_probe_out(0x20202020);
-+ mtk_probe_out(0x40404040);
-+ mtk_probe_out(0x80808080);
-+ mtk_probe_out(0x55555555);
-+ mtk_probe_out(0xaaaaaaaa);
-+}
-+
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+#define RET_SUCCESS 0
-+#define RET_FAIL 1
-+
-+static int dbg_u3w(int argc, char**argv)
-+{
-+ int u4TimingValue;
-+ char u1TimingValue;
-+ int u4TimingAddress;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: address value\n");
-+ return RET_FAIL;
-+ }
-+ u3phy_init();
-+
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
-+ u1TimingValue = u4TimingValue & 0xff;
-+ /* access MMIO directly */
-+ writel(u1TimingValue, u4TimingAddress);
-+ printk(KERN_ERR "Write done\n");
-+ return RET_SUCCESS;
-+
-+}
-+
-+static int dbg_u3r(int argc, char**argv)
-+{
-+ char u1ReadTimingValue;
-+ int u4TimingAddress;
-+ if (argc<2)
-+ {
-+ printk(KERN_ERR "Arg: address\n");
-+ return 0;
-+ }
-+ u3phy_init();
-+ mdelay(500);
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ /* access MMIO directly */
-+ u1ReadTimingValue = readl(u4TimingAddress);
-+ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
-+ return 0;
-+}
-+
-+static int dbg_u3init(int argc, char**argv)
-+{
-+ int ret;
-+ ret = u3phy_init();
-+ printk(KERN_ERR "phy registers and operations initial done\n");
-+ if(u3phy_ops->u2_slew_rate_calibration){
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ if(u3phy_ops->init(u3phy) == PHY_TRUE)
-+ return RET_SUCCESS;
-+ return RET_FAIL;
-+}
-+
-+void dbg_setU1U2(int argc, char**argv){
-+ struct xhci_hcd *xhci;
-+ int u1_value;
-+ int u2_value;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: u1value u2value\n");
-+ return RET_FAIL;
-+ }
-+
-+ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
-+ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
-+ addr = (SSUSB_U3_XHCI_BASE + 0x424);
-+ temp = readl(addr);
-+ temp = temp & (~(0x0000ffff));
-+ temp = temp | u1_value | (u2_value<<8);
-+ writel(temp, addr);
-+}
-+///////////////////////////////////////////////////////////////////////////////
-+
-+int call_function(char *buf)
-+{
-+ int i;
-+ int argc;
-+ char *argv[80];
-+
-+ argc = 0;
-+ do
-+ {
-+ argv[argc] = strsep(&buf, " ");
-+ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
-+ argc++;
-+ } while (buf);
-+ if (!strcmp("dbg.r", argv[0]))
-+ dbg_prb_out();
-+ else if (!strcmp("dbg.u3w", argv[0]))
-+ dbg_u3w(argc, argv);
-+ else if (!strcmp("dbg.u3r", argv[0]))
-+ dbg_u3r(argc, argv);
-+ else if (!strcmp("dbg.u3i", argv[0]))
-+ dbg_u3init(argc, argv);
-+ else if (!strcmp("pw.u1u2", argv[0]))
-+ dbg_setU1U2(argc, argv);
-+ return 0;
-+}
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ char w_buf[200];
-+ char r_buf[200] = "this is a test";
-+ int len = 200;
-+
-+ switch (cmd) {
-+ case IOCTL_READ:
-+ copy_to_user((char *) arg, r_buf, len);
-+ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
-+ break;
-+ case IOCTL_WRITE:
-+ copy_from_user(w_buf, (char *) arg, len);
-+ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
-+
-+ //invoke function
-+ return call_function(w_buf);
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+
-+ return len;
-+}
-+
-+int xhci_mtk_test_open(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
-+ return 0;
-+}
-+
-+int xhci_mtk_test_release(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
-+ return 0;
-+}
-+
-+
-+
-+
-Index: linux-3.10.44/drivers/usb/host/xhci-mtk.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10.44/drivers/usb/host/xhci-mtk.h 2014-07-02 11:20:15.821675026 +0100
-@@ -0,0 +1,120 @@
-+#ifndef _XHCI_MTK_H
-+#define _XHCI_MTK_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+
-+#define SSUSB_U3_XHCI_BASE 0xBE1C0000
-+#define SSUSB_U3_MAC_BASE 0xBE1C2400
-+#define SSUSB_U3_SYS_BASE 0xBE1C2600
-+#define SSUSB_U2_SYS_BASE 0xBE1C3400
-+#define SSUB_SIF_SLV_TOP 0xBE1D0000
-+#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
-+
-+#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
-+#define U3_PIPE_LATCH_TX 0
-+#define U3_PIPE_LATCH_RX 0
-+
-+#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
-+#define U3_REF_CK_PAR 0xb0
-+#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
-+#define U3_RX_UX_EXIT_LFPS_REF 3
-+#define U3_REF_CK_VAL 10
-+
-+#define U3_TIMING_PULSE_CTRL 0xb4
-+#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define USB20_TIMING_PARAMETER 0x40
-+#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define LINK_PM_TIMER 0x8
-+#define PM_LC_TIMEOUT_VALUE 3
-+
-+#define XHCI_IMOD 0x624
-+#define XHCI_IMOD_MT7621_VALUE 0x10
-+
-+#define SSUSB_HDMA_CFG 0x950
-+#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
-+
-+#define U3_LTSSM_TIMING_PARAMETER3 0x2514
-+#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
-+
-+#define U2_PHYD_CR1 0x64
-+
-+#define SSUSB_IP_SPAR0 0xC8
-+
-+#define SYNC_HS_EOF 0x938
-+#define SYNC_HS_EOF_VALUE 0x201F3
-+
-+#define HSCH_CFG1 0x960
-+#define SCH2_FIFO_DEPTH_OFFSET 16
-+
-+
-+#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
-+#define SSUSB_IP_SW_RST (1<<0)
-+#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
-+#define SSUSB_IP_PDN (1<<0)
-+#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
-+#define SSUSB_U3_PORT_DIS (1<<0)
-+#define SSUSB_U3_PORT_PDN (1<<1)
-+#define SSUSB_U3_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U3_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U3_PORT_MAC_RST (1<<4)
-+#define SSUSB_U3_PORT_PHYD_RST (1<<5)
-+#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
-+#define SSUSB_U2_PORT_DIS (1<<0)
-+#define SSUSB_U2_PORT_PDN (1<<1)
-+#define SSUSB_U2_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U2_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U2_PORT_MAC_RST (1<<4)
-+#define SSUSB_U2_PORT_PHYD_RST (1<<5)
-+#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
-+
-+#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
-+#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
-+
-+
-+#define XHCI_MTK_TEST_MAJOR 234
-+#define DEVICE_NAME "xhci_mtk_test"
-+
-+#define CLI_MAGIC 'CLI'
-+#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
-+#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
-+
-+void reinitIP(void);
-+void setInitialReg(void);
-+void dbg_prb_out(void);
-+int call_function(char *buf);
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+int xhci_mtk_test_open(struct inode *inode, struct file *file);
-+int xhci_mtk_test_release(struct inode *inode, struct file *file);
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
-+
-+/*
-+ mediatek probe out
-+*/
-+/************************************************************************************/
-+
-+#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
-+#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
-+
-+static inline void mtk_probe_init(const u32 byte){
-+ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
-+ writel(byte, ptr);
-+}
-+
-+static inline void mtk_probe_out(const u32 value){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+ writel(value, ptr);
-+}
-+
-+static inline u32 mtk_probe_value(void){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+
-+ return readl(ptr);
-+}
-+
-+
-+#endif
-Index: linux-3.10.44/drivers/usb/host/xhci-plat.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci-plat.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci-plat.c 2014-07-02 11:20:15.821675026 +0100
-@@ -25,6 +25,13 @@
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ /* MTK host controller gives a spurious successful event after a
-+ * short transfer. Ignore it.
-+ */
-+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
-+ xhci->quirks |= XHCI_LPM_SUPPORT;
-+#endif
- }
-
- /* called during probe() after chip reset completes */
-@@ -96,20 +103,32 @@
-
- driver = &xhci_plat_xhci_driver;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ irq = XHC_IRQ;
-+#else
- irq = platform_get_irq(pdev, 0);
-+#endif
-+
- if (irq < 0)
- return -ENODEV;
-
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-+#endif
-
- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd)
- return -ENOMEM;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ hcd->rsrc_start = (uint32_t)XHC_IO_START;
-+ hcd->rsrc_len = XHC_IO_LENGTH;
-+#else
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-+#endif
-
- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
- driver->description)) {
-Index: linux-3.10.44/drivers/usb/host/xhci-ring.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci-ring.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci-ring.c 2014-07-02 11:20:15.821675026 +0100
-@@ -236,7 +236,6 @@
- */
- if (!chain && !more_trbs_coming)
- break;
--
- /* If we're not dealing with 0.95 hardware or
- * isoc rings on AMD 0.96 host,
- * carry over the chain bit of the previous TRB
-@@ -273,16 +272,20 @@
- static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
- unsigned int num_trbs)
- {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- int num_trbs_in_deq_seg;
-+#endif
-
- if (ring->num_trbs_free < num_trbs)
- return 0;
-
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
- num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
- if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
- return 0;
- }
-+#endif
-
- return 1;
- }
-@@ -2910,6 +2913,7 @@
- next = ring->enqueue;
-
- while (last_trb(xhci, ring, ring->enq_seg, next)) {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- /* If we're not dealing with 0.95 hardware or isoc rings
- * on AMD 0.96 host, clear the chain bit.
- */
-@@ -2919,7 +2923,9 @@
- next->link.control &= cpu_to_le32(~TRB_CHAIN);
- else
- next->link.control |= cpu_to_le32(TRB_CHAIN);
--
-+#else
-+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
-+#endif
- wmb();
- next->link.control ^= cpu_to_le32(TRB_CYCLE);
-
-@@ -3049,6 +3055,9 @@
- start_trb->field[3] |= cpu_to_le32(start_cycle);
- else
- start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ wmb();
-+#endif
- xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
- }
-
-@@ -3108,6 +3117,29 @@
- return (remainder >> 10) << 17;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
-+{
-+ u32 max = 31;
-+ int remainder, td_packet_count, packet_transferred;
-+
-+ //0 for the last TRB
-+ //FIXME: need to workaround if there is ZLP in this TD
-+ if (td_running_total + trb_buffer_length == td_transfer_size)
-+ return 0;
-+
-+ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
-+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
-+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
-+ remainder = td_packet_count - packet_transferred;
-+
-+ if (remainder > max)
-+ return max << 17;
-+ else
-+ return remainder << 17;
-+}
-+#endif
-+
- /*
- * For xHCI 1.0 host controllers, TD size is the number of max packet sized
- * packets remaining in the TD (*not* including this TRB).
-@@ -3245,6 +3277,7 @@
- }
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3254,6 +3287,13 @@
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ if (num_trbs > 1)
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
-+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
-+#endif
-+
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3316,6 +3356,9 @@
- int running_total, trb_buff_len, ret;
- unsigned int total_packet_count;
- u64 addr;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
-
- if (urb->num_sgs)
- return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3341,6 +3384,25 @@
- running_total += TRB_MAX_BUFF_SIZE;
- }
- /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ default:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+ if((urb->transfer_flags & URB_ZERO_PACKET)
-+ && ((urb->transfer_buffer_length % max_packet) == 0)){
-+ num_trbs++;
-+ }
-+#endif
-
- ret = prepare_transfer(xhci, xhci->devs[slot_id],
- ep_index, urb->stream_id,
-@@ -3400,6 +3462,7 @@
- field |= TRB_ISP;
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3409,6 +3472,10 @@
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3498,7 +3565,11 @@
- field |= 0x1;
-
- /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (1) {
-+#else
- if (xhci->hci_version == 0x100) {
-+#endif
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
- field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3522,7 +3593,12 @@
- field = TRB_TYPE(TRB_DATA);
-
- length_field = TRB_LEN(urb->transfer_buffer_length) |
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- xhci_td_remainder(urb->transfer_buffer_length) |
-+#else
-+ //CC: MTK style, no scatter-gather for control transfer
-+ 0 |
-+#endif
- TRB_INTR_TARGET(0);
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
-@@ -3533,7 +3609,7 @@
- length_field,
- field | ep_ring->cycle_state);
- }
--
-+
- /* Save the DMA address of the last TRB in the TD */
- td->last_trb = ep_ring->enqueue;
-
-@@ -3645,6 +3721,9 @@
- u64 start_addr, addr;
- int i, j;
- bool more_trbs_coming;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
-
- ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-
-@@ -3658,6 +3737,21 @@
- start_trb = &ep_ring->enqueue->generic;
- start_cycle = ep_ring->cycle_state;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+#endif
-+
- urb_priv = urb->hcpriv;
- /* Queue the first TRB, even if it's zero-length */
- for (i = 0; i < num_tds; i++) {
-@@ -3729,9 +3823,13 @@
- } else {
- td->last_trb = ep_ring->enqueue;
- field |= TRB_IOC;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
-+#else
- if (xhci->hci_version == 0x100 &&
- !(xhci->quirks &
- XHCI_AVOID_BEI)) {
-+#endif
- /* Set BEI bit except for the last td */
- if (i < num_tds - 1)
- field |= TRB_BEI;
-@@ -3746,6 +3844,7 @@
- trb_buff_len = td_remain_len;
-
- /* Set the TRB length, TD size, & interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- td_len - running_total);
-@@ -3755,6 +3854,10 @@
- total_packet_count, urb,
- (trbs_per_td - j - 1));
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-Index: linux-3.10.44/drivers/usb/host/xhci.c
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci.c 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci.c 2014-07-02 11:20:15.825675026 +0100
-@@ -30,6 +30,16 @@
-
- #include "xhci.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include "mtk-phy.h"
-+#include "xhci-mtk-scheduler.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci-mtk.h"
-+#endif
-+
- #define DRIVER_AUTHOR "Sarah Sharp"
- #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
-
-@@ -38,6 +48,18 @@
- module_param(link_quirk, int, S_IRUGO | S_IWUSR);
- MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+static struct file_operations xhci_mtk_test_fops = {
-+ .owner = THIS_MODULE,
-+ .read = xhci_mtk_test_read,
-+ .write = xhci_mtk_test_write,
-+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
-+ .open = xhci_mtk_test_open,
-+ .release = xhci_mtk_test_release,
-+};
-+#endif
-+
- /* TODO: copied from ehci-hcd.c - can this be refactored? */
- /*
- * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -189,7 +211,7 @@
- return ret;
- }
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- static int xhci_free_msi(struct xhci_hcd *xhci)
- {
- int i;
-@@ -389,6 +411,7 @@
- return ret;
- }
- hcd->irq = pdev->irq;
-+
- return 0;
- }
-
-@@ -430,6 +453,11 @@
- xhci_dbg(xhci, "Attempting compliance mode recovery\n");
- hcd = xhci->shared_hcd;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (1 << 31);
-+ xhci_writel(xhci, temp, xhci->usb3_ports[i]);
-+#endif
-+
- if (hcd->state == HC_STATE_SUSPENDED)
- usb_hcd_resume_root_hub(hcd);
-
-@@ -478,6 +506,9 @@
- {
- const char *dmi_product_name, *dmi_sys_vendor;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ return true;
-+#endif
- dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
- dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
- if (!dmi_product_name || !dmi_sys_vendor)
-@@ -521,6 +552,10 @@
- } else {
- xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
- }
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ mtk_xhci_scheduler_init();
-+#endif
- retval = xhci_mem_init(xhci, GFP_KERNEL);
- xhci_dbg(xhci, "Finished xhci_init\n");
-
-@@ -664,7 +699,11 @@
- xhci_dbg(xhci, "// Set the interrupt modulation register\n");
- temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (u32) 16;
-+#else
- temp |= (u32) 160;
-+#endif
- xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
-
- /* Set the HCD state before we enable the irqs */
-@@ -685,6 +724,9 @@
- xhci_queue_vendor_command(xhci, 0, 0, 0,
- TRB_TYPE(TRB_NEC_GET_FW));
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ enableXhciAllPortPower(xhci);
-+#endif
- xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
- return 0;
- }
-@@ -1002,7 +1044,6 @@
-
- /* If restore operation fails, re-initialize the HC during resume */
- if ((temp & STS_SRE) || hibernated) {
--
- if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
- !(xhci_all_ports_seen_u0(xhci))) {
- del_timer_sync(&xhci->comp_mode_recovery_timer);
-@@ -1586,6 +1627,13 @@
- u32 drop_flag;
- u32 new_add_flags, new_drop_flags, new_slot_info;
- int ret;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ struct sch_ep *sch_ep = NULL;
-+ int isTT;
-+ int ep_type;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0)
-@@ -1637,6 +1685,40 @@
-
- xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
-+ , isTT, ep_type, (mtk_u32 *)ep);
-+ if (sch_ep != NULL) {
-+ kfree(sch_ep);
-+ }
-+ else {
-+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
-+ }
-+#else
-+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
-+#endif
-+#endif
-+
- xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
- (unsigned int) ep->desc.bEndpointAddress,
- udev->slot_id,
-@@ -1672,6 +1754,18 @@
- u32 new_add_flags, new_drop_flags, new_slot_info;
- struct xhci_virt_device *virt_dev;
- int ret = 0;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct xhci_ep_ctx *in_ep_ctx;
-+#if MTK_SCH_NEW
-+ struct sch_ep *sch_ep;
-+ int isTT;
-+ int ep_type;
-+ int maxp = 0;
-+ int burst = 0;
-+ int mult = 0;
-+ int interval;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0) {
-@@ -1734,6 +1828,56 @@
- return -ENOMEM;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
-+ || udev->speed == USB_SPEED_LOW) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->desc.wMaxPacketSize >> 11;
-+ mult = 0;
-+ }
-+ else if (udev->speed == USB_SPEED_SUPER) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->ss_ep_comp.bMaxBurst;
-+ mult = ep->ss_ep_comp.bmAttributes & 0x3;
-+ }
-+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
-+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
-+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
-+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
-+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#else
-+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#endif
-+#endif
- ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
- new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-
-@@ -2697,7 +2841,7 @@
- if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
- ctrl_ctx->drop_flags == 0)
- return 0;
--
-+
- xhci_dbg(xhci, "New Input Control Context:\n");
- slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
- xhci_dbg_ctx(xhci, virt_dev->in_ctx,
-@@ -4233,10 +4377,14 @@
- u16 *timeout)
- {
- if (state == USB3_LPM_U1) {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_intel_u1_timeout(udev, desc);
- } else {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_intel_u2_timeout(udev, desc);
- }
-
-@@ -4662,7 +4810,9 @@
- /* Accept arbitrarily long scatter-gather lists */
- hcd->self.sg_tablesize = ~0;
- /* XHCI controllers don't stop the ep queue on short packets :| */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- hcd->self.no_stop_on_short = 1;
-+#endif
-
- if (usb_hcd_is_primary_hcd(hcd)) {
- xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4731,6 +4881,10 @@
- goto error;
- xhci_dbg(xhci, "Reset complete\n");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ setInitialReg();
-+#endif
-+
- temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
- if (HCC_64BIT_ADDR(temp)) {
- xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-@@ -4755,8 +4909,21 @@
- MODULE_AUTHOR(DRIVER_AUTHOR);
- MODULE_LICENSE("GPL");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static struct platform_device xhci_platform_dev = {
-+ .name = "xhci-hcd",
-+ .id = -1,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+#endif
-+
- static int __init xhci_hcd_init(void)
- {
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct platform_device *pPlatformDev;
-+#endif
- int retval;
-
- retval = xhci_register_pci();
-@@ -4769,6 +4936,33 @@
- printk(KERN_DEBUG "Problem registering platform driver.");
- goto unreg_pci;
- }
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
-+
-+ u3phy_init();
-+ if (u3phy_ops->u2_slew_rate_calibration) {
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ u3phy_ops->init(u3phy);
-+ reinitIP();
-+
-+ pPlatformDev = &xhci_platform_dev;
-+ memset(pPlatformDev, 0, sizeof(struct platform_device));
-+ pPlatformDev->name = "xhci-hcd";
-+ pPlatformDev->id = -1;
-+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
-+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
-+
-+ retval = platform_device_register(&xhci_platform_dev);
-+ if (retval < 0)
-+ xhci_unregister_plat();
-+#endif
-+
- /*
- * Check the compiler generated sizes of structures that must be laid
- * out in specific ways for hardware access.
-@@ -4786,6 +4980,7 @@
- BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
- /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
- BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
-+
- return 0;
- unreg_pci:
- xhci_unregister_pci();
-Index: linux-3.10.44/drivers/usb/host/xhci.h
-===================================================================
---- linux-3.10.44.orig/drivers/usb/host/xhci.h 2014-06-16 21:43:06.000000000 +0100
-+++ linux-3.10.44/drivers/usb/host/xhci.h 2014-07-02 11:20:15.825675026 +0100
-@@ -29,9 +29,24 @@
- #include <linux/usb/hcd.h>
-
- /* Code sharing between pci-quirks and xhci hcd */
--#include "xhci-ext-caps.h"
-+#include "xhci-ext-caps.h"
- #include "pci-quirks.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define XHC_IRQ (22 + 8)
-+#define XHC_IO_START 0x1E1C0000
-+#define XHC_IO_LENGTH 0x10000
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+#endif
-+
-+
-+
-+
- /* xHCI PCI Configuration Registers */
- #define XHCI_SBRN_OFFSET (0x60)
-
-@@ -1536,8 +1551,12 @@
- /* Compliance Mode Recovery Data */
- struct timer_list comp_mode_recovery_timer;
- u32 port_status_u0;
-+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+#define COMP_MODE_RCVRY_MSECS 5000
-+#else
- /* Compliance Mode Timer Triggered every 2 seconds */
- #define COMP_MODE_RCVRY_MSECS 2000
-+#endif
- };
-
- /* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1703,7 +1722,7 @@
- void xhci_free_command(struct xhci_hcd *xhci,
- struct xhci_command *command);
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- /* xHCI PCI glue */
- int xhci_register_pci(void);
- void xhci_unregister_pci(void);
diff --git a/target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch b/target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch
deleted file mode 100644
index ec20066..0000000
--- a/target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch
+++ /dev/null
@@ -1,346 +0,0 @@
-From 1a961f146e65e2716dbe9065baa4c0931fcb6b3e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:34:11 +0000
-Subject: [PATCH 215/215] SPI: ralink: add mt7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++---
- 1 file changed, 205 insertions(+), 13 deletions(-)
-
---- a/drivers/spi/spi-rt2880.c
-+++ b/drivers/spi/spi-rt2880.c
-@@ -21,8 +21,13 @@
- #include <linux/io.h>
- #include <linux/reset.h>
- #include <linux/spi/spi.h>
-+#include <linux/of_device.h>
- #include <linux/platform_device.h>
-
-+#include <ralink_regs.h>
-+
-+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
-+
- #define DRIVER_NAME "spi-rt2880"
- /* only one slave is supported*/
- #define RALINK_NUM_CHIPSELECTS 1
-@@ -63,6 +68,25 @@
- /* SPIFIFOSTAT register bit field */
- #define SPIFIFOSTAT_TXFULL BIT(17)
-
-+#define MT7621_SPI_TRANS 0x00
-+#define SPITRANS_BUSY BIT(16)
-+#define MT7621_SPI_OPCODE 0x04
-+#define MT7621_SPI_DATA0 0x08
-+#define SPI_CTL_TX_RX_CNT_MASK 0xff
-+#define SPI_CTL_START BIT(8)
-+#define MT7621_SPI_POLAR 0x38
-+#define MT7621_SPI_MASTER 0x28
-+#define MT7621_SPI_SPACE 0x3c
-+
-+struct rt2880_spi;
-+
-+struct rt2880_spi_ops {
-+ void (*init_hw)(struct rt2880_spi *rs);
-+ void (*set_cs)(struct rt2880_spi *rs, int enable);
-+ int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
-+ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
-+};
-+
- struct rt2880_spi {
- struct spi_master *master;
- void __iomem *base;
-@@ -70,6 +94,8 @@ struct rt2880_spi {
- unsigned int speed;
- struct clk *clk;
- spinlock_t lock;
-+
-+ struct rt2880_spi_ops *ops;
- };
-
- static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struc
- return 0;
- }
-
-+static int mt7621_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
-+{
-+/* u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
-+
-+ // set default clock to hclk/5
-+ master &= ~(0xfff << 16);
-+ master |= 0x3 << 16;
-+*/
-+ return 0;
-+}
-+
- /*
- * called only when no transfer is active on the bus
- */
-@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_dev
-
- if (rs->speed != speed) {
- dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
-- rc = rt2880_spi_baudrate_set(spi, speed);
-+ rc = rs->ops->baudrate_set(spi, speed);
- if (rc)
- return rc;
- }
-@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2
- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
- }
-
-+static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
-+{
-+ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
-+
-+ if (enable)
-+ polar |= 1;
-+ else
-+ polar &= ~1;
-+ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
-+}
-+
- static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
- {
- int i;
-@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_r
- return -ETIMEDOUT;
- }
-
-+static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
-+{
-+ int i;
-+
-+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
-+ u32 status;
-+
-+ status = rt2880_spi_read(rs, MT7621_SPI_TRANS);
-+ if ((status & SPITRANS_BUSY) == 0) {
-+ return 0;
-+ }
-+ cpu_relax();
-+ udelay(1);
-+ }
-+
-+ return -ETIMEDOUT;
-+}
-+
- static unsigned int
--rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
-+rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
- {
- struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
- unsigned count = 0;
-@@ -239,6 +305,100 @@ out:
- return count;
- }
-
-+static unsigned int
-+mt7621_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ struct spi_transfer *next = NULL;
-+ const u8 *tx = xfer->tx_buf;
-+ u8 *rx = NULL;
-+ u32 trans;
-+ int len = xfer->len;
-+
-+ if (!tx)
-+ return 0;
-+
-+ if (!list_is_last(&xfer->transfer_list, list)) {
-+ next = list_entry(xfer->transfer_list.next, struct spi_transfer, transfer_list);
-+ rx = next->rx_buf;
-+ }
-+
-+ trans = rt2880_spi_read(rs, MT7621_SPI_TRANS);
-+ trans &= ~SPI_CTL_TX_RX_CNT_MASK;
-+
-+ if (tx) {
-+ u32 data0 = 0, opcode = 0;
-+
-+ switch (xfer->len) {
-+ case 8:
-+ data0 |= tx[7] << 24;
-+ case 7:
-+ data0 |= tx[6] << 16;
-+ case 6:
-+ data0 |= tx[5] << 8;
-+ case 5:
-+ data0 |= tx[4];
-+ case 4:
-+ opcode |= tx[3] << 8;
-+ case 3:
-+ opcode |= tx[2] << 16;
-+ case 2:
-+ opcode |= tx[1] << 24;
-+ case 1:
-+ opcode |= tx[0];
-+ break;
-+
-+ default:
-+ dev_err(&spi->dev, "trying to write too many bytes: %d\n", next->len);
-+ return -EINVAL;
-+ }
-+
-+ rt2880_spi_write(rs, MT7621_SPI_DATA0, data0);
-+ rt2880_spi_write(rs, MT7621_SPI_OPCODE, opcode);
-+ trans |= xfer->len;
-+ }
-+
-+ if (rx)
-+ trans |= (next->len << 4);
-+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
-+ trans |= SPI_CTL_START;
-+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
-+
-+ mt7621_spi_wait_till_ready(rs);
-+
-+ if (rx) {
-+ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
-+ u32 opcode = rt2880_spi_read(rs, MT7621_SPI_OPCODE);
-+
-+ switch (next->len) {
-+ case 8:
-+ rx[7] = (opcode >> 24) & 0xff;
-+ case 7:
-+ rx[6] = (opcode >> 16) & 0xff;
-+ case 6:
-+ rx[5] = (opcode >> 8) & 0xff;
-+ case 5:
-+ rx[4] = opcode & 0xff;
-+ case 4:
-+ rx[3] = (data0 >> 24) & 0xff;
-+ case 3:
-+ rx[2] = (data0 >> 16) & 0xff;
-+ case 2:
-+ rx[1] = (data0 >> 8) & 0xff;
-+ case 1:
-+ rx[0] = data0 & 0xff;
-+ break;
-+
-+ default:
-+ dev_err(&spi->dev, "trying to read too many bytes: %d\n", next->len);
-+ return -EINVAL;
-+ }
-+ len += next->len;
-+ }
-+
-+ return len;
-+}
-+
- static int rt2880_spi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
- {
-@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_messa
- }
-
- if (!cs_active) {
-- rt2880_spi_set_cs(rs, 1);
-+ rs->ops->set_cs(rs, 1);
- cs_active = 1;
- }
-
- if (t->len)
-- m->actual_length += rt2880_spi_write_read(spi, t);
-+ m->actual_length += rs->ops->write_read(spi, &m->transfers, t);
-
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (t->cs_change) {
-- rt2880_spi_set_cs(rs, 0);
-+ rs->ops->set_cs(rs, 0);
- cs_active = 0;
- }
- }
-
- msg_done:
- if (cs_active)
-- rt2880_spi_set_cs(rs, 0);
-+ rs->ops->set_cs(rs, 0);
-
- m->status = status;
- spi_finalize_current_message(master);
-@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt28
- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
- }
-
-+static void mt7621_spi_reset(struct rt2880_spi *rs)
-+{
-+ u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER);
-+
-+ master &= ~(0xfff << 16);
-+ master |= 3 << 16;
-+
-+ master |= 7 << 29;
-+ rt2880_spi_write(rs, MT7621_SPI_MASTER, master);
-+}
-+
-+static struct rt2880_spi_ops spi_ops[] = {
-+ {
-+ .init_hw = rt2880_spi_reset,
-+ .set_cs = rt2880_spi_set_cs,
-+ .baudrate_set = rt2880_spi_baudrate_set,
-+ .write_read = rt2880_spi_write_read,
-+ }, {
-+ .init_hw = mt7621_spi_reset,
-+ .set_cs = mt7621_spi_set_cs,
-+ .baudrate_set = mt7621_spi_baudrate_set,
-+ .write_read = mt7621_spi_write_read,
-+ },
-+};
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
-+ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
- static int rt2880_spi_probe(struct platform_device *pdev)
- {
-+ const struct of_device_id *match;
- struct spi_master *master;
- struct rt2880_spi *rs;
- unsigned long flags;
-@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platf
- int status = 0;
- struct clk *clk;
-
-+ match = of_match_device(rt2880_spi_match, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, r);
- if (IS_ERR(base))
-@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platf
- rs->clk = clk;
- rs->master = master;
- rs->sys_freq = clk_get_rate(rs->clk);
-+ rs->ops = (struct rt2880_spi_ops *) match->data;
- dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
- spin_lock_irqsave(&rs->lock, flags);
-
- device_reset(&pdev->dev);
-
-- rt2880_spi_reset(rs);
-+ rs->ops->init_hw(rs);
-
- return spi_register_master(master);
- }
-@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct plat
-
- MODULE_ALIAS("platform:" DRIVER_NAME);
-
--static const struct of_device_id rt2880_spi_match[] = {
-- { .compatible = "ralink,rt2880-spi" },
-- {},
--};
--MODULE_DEVICE_TABLE(of, rt2880_spi_match);
--
- static struct platform_driver rt2880_spi_driver = {
- .driver = {
- .name = DRIVER_NAME,
diff --git a/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch b/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch
deleted file mode 100644
index a3a5ec2..0000000
--- a/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch
+++ /dev/null
@@ -1,6045 +0,0 @@
-From 6e10c9b7ab93cb105dc2779769c48949ebc60ee7 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 08:51:14 +0000
-Subject: [PATCH 1/3] foo
-
----
- drivers/net/ethernet/raeth/Kconfig | 343 +++++++
- drivers/net/ethernet/raeth/Makefile | 7 +
- drivers/net/ethernet/raeth/ethtool_readme.txt | 44 +
- drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++
- drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++
- drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++
- drivers/net/ethernet/raeth/ra_mac.c | 93 ++
- drivers/net/ethernet/raeth/ra_mac.h | 35 +
- drivers/net/ethernet/raeth/raether.c | 663 +++++++++++++
- drivers/net/ethernet/raeth/raether.h | 92 ++
- drivers/net/ethernet/raeth/raether_pdma.c | 202 ++++
- drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++
- drivers/net/ethernet/ralink/gsw_mt7620a.c | 15 +-
- drivers/net/ethernet/ralink/mt7530.c | 2 +-
- drivers/net/ethernet/ralink/mt7621.c | 253 +++++
- drivers/net/ethernet/ralink/mt762x.c | 295 ++++++
- drivers/net/ethernet/ralink/mt762x.h | 38 +
- drivers/net/ethernet/ralink/ralink_soc_eth.c | 25 +-
- drivers/net/ethernet/ralink/ralink_soc_eth.h | 9 +-
- drivers/net/ethernet/ralink/soc_mt7621.c | 5 +-
- 20 files changed, 4429 insertions(+), 23 deletions(-)
- create mode 100644 drivers/net/ethernet/raeth/Kconfig
- create mode 100644 drivers/net/ethernet/raeth/Makefile
- create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt
- create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c
- create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h
- create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h
- create mode 100644 drivers/net/ethernet/raeth/ra_mac.c
- create mode 100644 drivers/net/ethernet/raeth/ra_mac.h
- create mode 100644 drivers/net/ethernet/raeth/raether.c
- create mode 100644 drivers/net/ethernet/raeth/raether.h
- create mode 100755 drivers/net/ethernet/raeth/raether_pdma.c
- create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c
- create mode 100644 drivers/net/ethernet/ralink/mt7621.c
- create mode 100644 drivers/net/ethernet/ralink/mt762x.c
- create mode 100644 drivers/net/ethernet/ralink/mt762x.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/Kconfig
-@@ -0,0 +1,344 @@
-+
-+config RA_NAT_NONE
-+ bool
-+ default y
-+ depends on RALINK
-+
-+config MT7621_ASIC
-+ bool
-+ default y
-+ depends on SOC_MT7621
-+
-+config RALINK_MT7621
-+ bool
-+ default y
-+ depends on SOC_MT7621
-+
-+config RAETH
-+ tristate "Ralink GMAC"
-+ depends on SOC_MT7621
-+ ---help---
-+ This driver supports Ralink gigabit ethernet family of
-+ adapters.
-+
-+config PDMA_NEW
-+ bool
-+ default y if (RALINK_MT7620 || RALINK_MT7621)
-+ depends on RAETH
-+
-+config RAETH_SCATTER_GATHER_RX_DMA
-+ bool
-+ default y if (RALINK_MT7620 || RALINK_MT7621)
-+ depends on RAETH
-+
-+
-+choice
-+ prompt "Network BottomHalves"
-+ depends on RAETH
-+ default RA_NETWORK_WORKQUEUE_BH
-+
-+ config RA_NETWORK_TASKLET_BH
-+ bool "Tasklet"
-+
-+ config RA_NETWORK_WORKQUEUE_BH
-+ bool "Work Queue"
-+
-+ config RAETH_NAPI
-+ bool "NAPI"
-+
-+endchoice
-+
-+#config TASKLET_WORKQUEUE_SW
-+# bool "Tasklet and Workqueue switch"
-+# depends on RA_NETWORK_TASKLET_BH
-+
-+config RAETH_SKB_RECYCLE_2K
-+ bool "SKB Recycling"
-+ depends on RAETH
-+
-+config RAETH_SPECIAL_TAG
-+ bool "Ralink Special Tag (0x810x)"
-+ depends on RAETH && RT_3052_ESW
-+
-+#config RAETH_JUMBOFRAME
-+# bool "Jumbo Frame up to 4K bytes"
-+# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628)
-+
-+config RAETH_CHECKSUM_OFFLOAD
-+ bool "TCP/UDP/IP checksum offload"
-+ default y
-+ depends on RAETH && !RALINK_RT2880
-+
-+#config RAETH_SW_FC
-+# bool "When TX ring is full, inform kernel stop transmit and stop RX handler"
-+# default n
-+# depends on RAETH
-+
-+config 32B_DESC
-+ bool "32bytes TX/RX description"
-+ default n
-+ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621)
-+ ---help---
-+ At this moment, you cannot enable 32B description with Multiple RX ring at the same time.
-+
-+config RAETH_LRO
-+ bool "LRO (Large Receive Offload )"
-+ select INET_LRO
-+ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621)
-+
-+config RAETH_HW_VLAN_TX
-+ bool "Transmit VLAN HW (DoubleVLAN is not supported)"
-+ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628)
-+ ---help---
-+ Please disable HW_VLAN_TX if you need double vlan
-+
-+config RAETH_HW_VLAN_RX
-+ bool "Receive VLAN HW (DoubleVLAN is not supported)"
-+ depends on RAETH && RALINK_MT7621
-+ ---help---
-+ Please disable HW_VLAN_RX if you need double vlan
-+
-+config RAETH_TSO
-+ bool "TSOV4 (Tcp Segmentaton Offload)"
-+ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621
-+
-+config RAETH_TSOV6
-+ bool "TSOV6 (Tcp Segmentaton Offload)"
-+ depends on RAETH_TSO
-+
-+config RAETH_RW_PDMAPTR_FROM_VAR
-+ bool
-+ default y if RALINK_RT6855A || RALINK_MT7620
-+ depends on RAETH
-+
-+#config RAETH_QOS
-+# bool "QoS Feature"
-+# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO
-+
-+choice
-+ prompt "QoS Type"
-+ depends on RAETH_QOS
-+ default DSCP_QOS_DSCP
-+
-+config RAETH_QOS_DSCP_BASED
-+ bool "DSCP-based"
-+ depends on RAETH_QOS
-+
-+config RAETH_QOS_VPRI_BASED
-+ bool "VPRI-based"
-+ depends on RAETH_QOS
-+
-+endchoice
-+
-+config RAETH_QDMA
-+ bool "Choose QDMA instead PDMA"
-+ default n
-+ depends on RAETH && RALINK_MT7621
-+
-+choice
-+ prompt "GMAC is connected to"
-+ depends on RAETH
-+ default GE1_RGMII_FORCE_1000
-+
-+config GE1_MII_FORCE_100
-+ bool "MII_FORCE_100 (10/100M Switch)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_MII_AN
-+ bool "MII_AN (100Phy)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RVMII_FORCE_100
-+ bool "RvMII_FORCE_100 (CPU)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883)
-+ select RALINK_SPI
-+
-+config GE1_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on (RALINK_MT7621)
-+ select RT_3052_ESW
-+
-+config GE1_TRGMII_FORCE_1200
-+ bool "TRGMII_FORCE_1200 (GigaSW, CPU)"
-+ depends on (RALINK_MT7621)
-+ select RT_3052_ESW
-+
-+config GE1_RGMII_AN
-+ bool "RGMII_AN (GigaPhy)"
-+ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621)
-+
-+config GE1_RGMII_NONE
-+ bool "NONE (NO CONNECT)"
-+ depends on (RALINK_MT7621)
-+
-+endchoice
-+
-+config RT_3052_ESW
-+ bool "Ralink Embedded Switch"
-+ default y
-+ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628)
-+
-+config LAN_WAN_SUPPORT
-+ bool "LAN/WAN Partition"
-+ depends on RAETH_ROUTER || RT_3052_ESW
-+
-+choice
-+ prompt "Switch Board Layout Type"
-+ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000
-+ default WAN_AT_P0
-+
-+ config WAN_AT_P4
-+ bool "LLLL/W"
-+
-+ config WAN_AT_P0
-+ bool "W/LLLL"
-+endchoice
-+
-+config RALINK_VISTA_BASIC
-+ bool 'Vista Basic Logo for IC+ 175C'
-+ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883)
-+
-+config ESW_DOUBLE_VLAN_TAG
-+ bool
-+ default y if RT_3052_ESW
-+
-+config RAETH_HAS_PORT4
-+ bool "Port 4 Support"
-+ depends on RAETH && RALINK_MT7620
-+choice
-+ prompt "Target Mode"
-+ depends on RAETH_HAS_PORT4
-+ default P4_RGMII_TO_MAC_MODE
-+
-+ config P4_MAC_TO_PHY_MODE
-+ bool "Giga_Phy (RGMII)"
-+ config GE_RGMII_MT7530_P0_AN
-+ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)"
-+ config GE_RGMII_MT7530_P4_AN
-+ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)"
-+ config P4_RGMII_TO_MAC_MODE
-+ bool "Giga_SW/iNIC (RGMII)"
-+ config P4_MII_TO_MAC_MODE
-+ bool "External_CPU (MII_RvMII)"
-+ config P4_RMII_TO_MAC_MODE
-+ bool "External_CPU (RvMII_MII)"
-+endchoice
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex "Port4 Phy Address"
-+ default 0x4
-+ depends on P4_MAC_TO_PHY_MODE
-+
-+config RAETH_HAS_PORT5
-+ bool "Port 5 Support"
-+ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)
-+choice
-+ prompt "Target Mode"
-+ depends on RAETH_HAS_PORT5
-+ default P5_RGMII_TO_MAC_MODE
-+
-+ config P5_MAC_TO_PHY_MODE
-+ bool "Giga_Phy (RGMII)"
-+ config P5_RGMII_TO_MAC_MODE
-+ bool "Giga_SW/iNIC (RGMII)"
-+ config P5_RGMII_TO_MT7530_MODE
-+ bool "MT7530 Giga_SW (RGMII)"
-+ depends on RALINK_MT7620
-+ config P5_MII_TO_MAC_MODE
-+ bool "External_CPU (MII_RvMII)"
-+ config P5_RMII_TO_MAC_MODE
-+ bool "External_CPU (RvMII_MII)"
-+endchoice
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR
-+ hex "GE1 Phy Address"
-+ default 0x1F
-+ depends on GE1_MII_AN || GE1_RGMII_AN
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR
-+ hex "Port5 Phy Address"
-+ default 0x5
-+ depends on P5_MAC_TO_PHY_MODE
-+
-+config RAETH_GMAC2
-+ bool "GMAC2 Support"
-+ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621)
-+
-+choice
-+ prompt "GMAC2 is connected to"
-+ depends on RAETH_GMAC2
-+ default GE2_RGMII_AN
-+
-+config GE2_MII_FORCE_100
-+ bool "MII_FORCE_100 (10/100M Switch)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_MII_AN
-+ bool "MII_AN (100Phy)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_RVMII_FORCE_100
-+ bool "RvMII_FORCE_100 (CPU)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_RGMII_FORCE_1000
-+ bool "RGMII_FORCE_1000 (GigaSW, CPU)"
-+ depends on RAETH_GMAC2
-+ select RALINK_SPI
-+
-+config GE2_RGMII_AN
-+ bool "RGMII_AN (GigaPhy)"
-+ depends on RAETH_GMAC2
-+
-+config GE2_INTERNAL_GPHY
-+ bool "Internal GigaPHY"
-+ depends on RAETH_GMAC2
-+ select LAN_WAN_SUPPORT
-+
-+endchoice
-+
-+config GE_RGMII_INTERNAL_P0_AN
-+ bool
-+ depends on GE2_INTERNAL_GPHY
-+ default y if WAN_AT_P0
-+
-+config GE_RGMII_INTERNAL_P4_AN
-+ bool
-+ depends on GE2_INTERNAL_GPHY
-+ default y if WAN_AT_P4
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex
-+ default 0 if GE_RGMII_INTERNAL_P0_AN
-+ default 4 if GE_RGMII_INTERNAL_P4_AN
-+ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN
-+
-+config MAC_TO_GIGAPHY_MODE_ADDR2
-+ hex "GE2 Phy Address"
-+ default 0x1E
-+ depends on GE2_MII_AN || GE2_RGMII_AN
-+
-+#force 100M
-+config RAETH_ROUTER
-+bool
-+default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100
-+
-+#force 1000M
-+config MAC_TO_MAC_MODE
-+bool
-+default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000
-+depends on (RALINK_RT2880 || RALINK_RT3883)
-+
-+#AN
-+config GIGAPHY
-+bool
-+default y if GE1_RGMII_AN || GE2_RGMII_AN
-+
-+#AN
-+config 100PHY
-+bool
-+default y if GE1_MII_AN || GE2_MII_AN
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/Makefile
-@@ -0,0 +1,7 @@
-+obj-$(CONFIG_RAETH) += raeth.o
-+raeth-objs := ra_mac.o mii_mgr.o
-+raeth-objs += raether_pdma.o
-+EXTRA_CFLAGS += -DWORKQUEUE_BH
-+#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING
-+
-+raeth-objs += raether.o
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ethtool_readme.txt
-@@ -0,0 +1,44 @@
-+
-+Ethtool readme for selecting different PHY address.
-+
-+Before doing any ethtool command you should make sure the current PHY
-+address is expected. The default PHY address is 1(port 1).
-+
-+You can change current PHY address to X(0~4) by doing follow command:
-+# echo X > /proc/rt2880/gmac
-+
-+Ethtool command also would show the current PHY address as following.
-+
-+# ethtool eth2
-+Settings for eth2:
-+ Supported ports: [ TP MII ]
-+ Supported link modes: 10baseT/Half 10baseT/Full
-+ 100baseT/Half 100baseT/Full
-+ Supports auto-negotiation: Yes
-+ Advertised link modes: 10baseT/Half 10baseT/Full
-+ 100baseT/Half 100baseT/Full
-+ Advertised auto-negotiation: No
-+ Speed: 10Mb/s
-+ Duplex: Full
-+ Port: MII
-+ PHYAD: 1
-+ Transceiver: internal
-+ Auto-negotiation: off
-+ Current message level: 0x00000000 (0)
-+ Link detected: no
-+
-+
-+The "PHYAD" field shows the current PHY address.
-+
-+
-+
-+Usage example
-+1) show port1 info
-+# echo 1 > /proc/rt2880/gmac # change phy address to 1
-+# ethtool eth2
-+
-+2) show port0 info
-+# echo 0 > /proc/rt2880/gmac # change phy address to 0
-+# ethtool eth2
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/mii_mgr.c
-@@ -0,0 +1,166 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/netdevice.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#endif
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+
-+
-+#define PHY_CONTROL_0 0x0004
-+#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0)
-+#define enable_mdio(x)
-+
-+
-+u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
-+{
-+ u32 volatile status = 0;
-+ u32 rc = 0;
-+ unsigned long volatile t_start = jiffies;
-+ u32 volatile data = 0;
-+
-+ /* We enable mdio gpio purpose register, and disable it when exit. */
-+ enable_mdio(1);
-+
-+ // make sure previous read operation is complete
-+ while (1) {
-+ // 0 : Read/write operation complete
-+ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
-+ {
-+ break;
-+ }
-+ else if (time_after(jiffies, t_start + 5*HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Read operation is ongoing !!\n");
-+ return rc;
-+ }
-+ }
-+
-+ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ data |= (1<<31);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
-+
-+
-+ // make sure read operation is complete
-+ t_start = jiffies;
-+ while (1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) {
-+ status = sysRegRead(MDIO_PHY_CONTROL_0);
-+ *read_data = (u32)(status & 0x0000FFFF);
-+
-+ enable_mdio(0);
-+ return 1;
-+ }
-+ else if (time_after(jiffies, t_start+5*HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Read operation is ongoing and Time Out!!\n");
-+ return 0;
-+ }
-+ }
-+}
-+
-+u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
-+{
-+ unsigned long volatile t_start=jiffies;
-+ u32 volatile data;
-+
-+ enable_mdio(1);
-+
-+ // make sure previous write operation is complete
-+ while(1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31)))
-+ {
-+ break;
-+ }
-+ else if (time_after(jiffies, t_start + 5 * HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Write operation ongoing\n");
-+ return 0;
-+ }
-+ }
-+ /*add 1 us delay to make sequencial write more robus*/
-+ udelay(1);
-+
-+ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data;
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data);
-+ data |= (1<<31);
-+ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation
-+ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0);
-+
-+ t_start = jiffies;
-+
-+ // make sure write operation is complete
-+ while (1) {
-+ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete
-+ {
-+ enable_mdio(0);
-+ return 1;
-+ }
-+ else if (time_after(jiffies, t_start + 5 * HZ)) {
-+ enable_mdio(0);
-+ printk("\n MDIO Write operation Time Out\n");
-+ return 0;
-+ }
-+ }
-+}
-+
-+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data)
-+{
-+ u32 low_word;
-+ u32 high_word;
-+ if(phy_addr==31)
-+ {
-+ //phase1: write page address phase
-+ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) {
-+ //phase2: write address & read low word phase
-+ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) {
-+ //phase3: write address & read high word phase
-+ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) {
-+ *read_data = (high_word << 16) | (low_word & 0xFFFF);
-+ return 1;
-+ }
-+ }
-+ }
-+ } else
-+ {
-+ if(__mii_mgr_read(phy_addr, phy_register, read_data)) {
-+ return 1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data)
-+{
-+ if(phy_addr == 31)
-+ {
-+ //phase1: write page address phase
-+ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) {
-+ //phase2: write address & read low word phase
-+ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) {
-+ //phase3: write address & read high word phase
-+ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) {
-+ return 1;
-+ }
-+ }
-+ }
-+ } else
-+ {
-+ if(__mii_mgr_write(phy_addr, phy_register, write_data)) {
-+ return 1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(mii_mgr_write);
-+EXPORT_SYMBOL(mii_mgr_read);
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra2882ethreg.h
-@@ -0,0 +1,1268 @@
-+#ifndef RA2882ETHREG_H
-+#define RA2882ETHREG_H
-+
-+#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h
-+#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#endif
-+#include "raether.h"
-+
-+#ifdef WORKQUEUE_BH
-+#include <linux/workqueue.h>
-+#endif // WORKQUEUE_BH //
-+#ifdef CONFIG_RAETH_LRO
-+#include <linux/inet_lro.h>
-+#endif
-+
-+#define MAX_PACKET_SIZE 1514
-+#define MIN_PACKET_SIZE 60
-+
-+#define phys_to_bus(a) (a & 0x1FFFFFFF)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
-+#define BIT(x) ((1 << x))
-+#endif
-+#define ETHER_ADDR_LEN 6
-+
-+/* Phy Vender ID list */
-+
-+#define EV_ICPLUS_PHY_ID0 0x0243
-+#define EV_ICPLUS_PHY_ID1 0x0D90
-+#define EV_MARVELL_PHY_ID0 0x0141
-+#define EV_MARVELL_PHY_ID1 0x0CC2
-+#define EV_VTSS_PHY_ID0 0x0007
-+#define EV_VTSS_PHY_ID1 0x0421
-+
-+/*
-+ FE_INT_STATUS
-+*/
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+
-+#define RX_COHERENT BIT(31)
-+#define RX_DLY_INT BIT(30)
-+#define TX_COHERENT BIT(29)
-+#define TX_DLY_INT BIT(28)
-+
-+#define RX_DONE_INT1 BIT(17)
-+#define RX_DONE_INT0 BIT(16)
-+
-+#define TX_DONE_INT3 BIT(3)
-+#define TX_DONE_INT2 BIT(2)
-+#define TX_DONE_INT1 BIT(1)
-+#define TX_DONE_INT0 BIT(0)
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+#define RLS_COHERENT BIT(29)
-+#define RLS_DLY_INT BIT(28)
-+#define RLS_DONE_INT BIT(0)
-+#endif
-+
-+#else
-+//#define CNT_PPE_AF BIT(31)
-+//#define CNT_GDM_AF BIT(29)
-+#define PSE_P2_FC BIT(26)
-+#define GDM_CRC_DROP BIT(25)
-+#define PSE_BUF_DROP BIT(24)
-+#define GDM_OTHER_DROP BIT(23)
-+#define PSE_P1_FC BIT(22)
-+#define PSE_P0_FC BIT(21)
-+#define PSE_FQ_EMPTY BIT(20)
-+#define GE1_STA_CHG BIT(18)
-+#define TX_COHERENT BIT(17)
-+#define RX_COHERENT BIT(16)
-+
-+#define TX_DONE_INT3 BIT(11)
-+#define TX_DONE_INT2 BIT(10)
-+#define TX_DONE_INT1 BIT(9)
-+#define TX_DONE_INT0 BIT(8)
-+#define RX_DONE_INT1 RX_DONE_INT0
-+#define RX_DONE_INT0 BIT(2)
-+#define TX_DLY_INT BIT(1)
-+#define RX_DLY_INT BIT(0)
-+#endif
-+
-+#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \
-+ TX_DONE_INT1 | TX_DONE_INT0 | \
-+ RX_DONE_INT0 )
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1)
-+#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT)
-+
-+#define NUM_QDMA_PAGE 256
-+#define QDMA_PAGE_SIZE 2048
-+#endif
-+/*
-+ * SW_INT_STATUS
-+ */
-+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+#define PORT0_QUEUE_FULL BIT(14) //port0 queue full
-+#define PORT1_QUEUE_FULL BIT(15) //port1 queue full
-+#define PORT2_QUEUE_FULL BIT(16) //port2 queue full
-+#define PORT3_QUEUE_FULL BIT(17) //port3 queue full
-+#define PORT4_QUEUE_FULL BIT(18) //port4 queue full
-+#define PORT5_QUEUE_FULL BIT(19) //port5 queue full
-+#define PORT6_QUEUE_FULL BIT(20) //port6 queue full
-+#define SHARED_QUEUE_FULL BIT(23) //shared queue full
-+#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped
-+#define BC_STROM BIT(25) //the device is undergoing broadcast storm
-+#define PORT_ST_CHG BIT(26) //Port status change
-+#define UNSECURED_ALERT BIT(27) //Intruder alert
-+#define ABNORMAL_ALERT BIT(28) //Abnormal
-+
-+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00)
-+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04)
-+#define ESW_INT_ALL (PORT_ST_CHG)
-+
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620)
-+#define MIB_INT BIT(25)
-+#define ACL_INT BIT(24)
-+#define P5_LINK_CH BIT(5)
-+#define P4_LINK_CH BIT(4)
-+#define P3_LINK_CH BIT(3)
-+#define P2_LINK_CH BIT(2)
-+#define P1_LINK_CH BIT(1)
-+#define P0_LINK_CH BIT(0)
-+
-+#define RX_GOCT_CNT BIT(4)
-+#define RX_GOOD_CNT BIT(6)
-+#define TX_GOCT_CNT BIT(17)
-+#define TX_GOOD_CNT BIT(19)
-+
-+#define MSK_RX_GOCT_CNT BIT(4)
-+#define MSK_RX_GOOD_CNT BIT(6)
-+#define MSK_TX_GOCT_CNT BIT(17)
-+#define MSK_TX_GOOD_CNT BIT(19)
-+#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT)
-+//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT)
-+
-+
-+#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8)
-+#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC)
-+#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT)
-+#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8)
-+#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004)
-+#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104)
-+#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204)
-+#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304)
-+#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404)
-+#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504)
-+#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604)
-+#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008)
-+#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108)
-+#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208)
-+#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308)
-+#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408)
-+#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508)
-+#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608)
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704)
-+#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708)
-+#endif
-+
-+
-+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000)
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000)
-+
-+#define P5_LINK_CH BIT(5)
-+#define P4_LINK_CH BIT(4)
-+#define P3_LINK_CH BIT(3)
-+#define P2_LINK_CH BIT(2)
-+#define P1_LINK_CH BIT(1)
-+#define P0_LINK_CH BIT(0)
-+
-+
-+#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)//
-+
-+#define RX_BUF_ALLOC_SIZE 2000
-+#define FASTPATH_HEADROOM 64
-+
-+#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line
-+
-+#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \
-+ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \
-+ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr))
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+typedef struct _PSEUDO_ADAPTER {
-+ struct net_device *RaethDev;
-+ struct net_device *PseudoDev;
-+ struct net_device_stats stat;
-+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
-+ struct mii_if_info mii_info;
-+#endif
-+
-+} PSEUDO_ADAPTER, PPSEUDO_ADAPTER;
-+
-+#define MAX_PSEUDO_ENTRY 1
-+#endif
-+
-+
-+
-+/* Register Categories Definition */
-+#define RAFRAMEENGINE_OFFSET 0x0000
-+#define RAGDMA_OFFSET 0x0020
-+#define RAPSE_OFFSET 0x0040
-+#define RAGDMA2_OFFSET 0x0060
-+#define RACDMA_OFFSET 0x0080
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+
-+#define RAPDMA_OFFSET 0x0800
-+#define SDM_OFFSET 0x0C00
-+#else
-+#define RAPDMA_OFFSET 0x0100
-+#endif
-+#define RAPPE_OFFSET 0x0200
-+#define RACMTABLE_OFFSET 0x0400
-+#define RAPOLICYTABLE_OFFSET 0x1000
-+
-+
-+/* Register Map Detail */
-+/* RT3883 */
-+#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14)
-+
-+#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+
-+/* 1. PDMA */
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C)
-+
-+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200)
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204)
-+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208)
-+#define PDMA_RST_CFG (PDMA_RST_IDX)
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C)
-+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210)
-+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220)
-+#define FE_INT_STATUS (INT_STATUS)
-+#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228)
-+#define FE_INT_ENABLE (INT_MASK)
-+#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
-+#define PDMA_SCH_CFG (PDMA_WRR)
-+
-+#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration
-+#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring
-+#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring
-+#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB
-+#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB
-+#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count
-+#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count
-+#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count
-+#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count
-+#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count
-+
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+
-+/* Old FE with New PDMA */
-+#define PDMA_RELATED 0x0800
-+/* 1. PDMA */
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C)
-+
-+#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200)
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204)
-+#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208)
-+#define PDMA_RST_CFG (PDMA_RST_IDX)
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C)
-+#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210)
-+#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220)
-+#define FE_INT_STATUS (INT_STATUS)
-+#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228)
-+#define FE_INT_ENABLE (INT_MASK)
-+#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280)
-+#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284)
-+
-+#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00
-+#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04
-+#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08
-+#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c
-+//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18
-+#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define GDMA1_RELATED 0x0600
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define GDMA1_RELATED 0x0500
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+
-+#define GDMA2_RELATED 0x1500
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
-+#else
-+#define GDMA1_RELATED 0x0020
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00)
-+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10)
-+
-+#define GDMA2_RELATED 0x0060
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00)
-+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10)
-+#endif
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define PSE_RELATED 0x0500
-+#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
-+#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
-+#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
-+#else
-+#define PSE_RELATED 0x0040
-+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00)
-+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04)
-+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08)
-+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C)
-+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10)
-+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14)
-+#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18)
-+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C)
-+#endif
-+
-+
-+#if defined (CONFIG_RALINK_MT7620)
-+#define CDMA_RELATED 0x0400
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4)
-+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8)
-+#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0)
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define CDMA_RELATED 0x0400
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition
-+#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
-+#else
-+#define CDMA_RELATED 0x0080
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00)
-+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04)
-+#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4)
-+#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8)
-+#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0)
-+#endif
-+
-+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100)
-+
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+/*kurtis: add QDMA define*/
-+
-+#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C)
-+#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58)
-+
-+#define QDMA_RELATED 0x1800
-+#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000)
-+#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004)
-+#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008)
-+#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C)
-+#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010)
-+#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014)
-+#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018)
-+#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C)
-+#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020)
-+#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024)
-+#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028)
-+#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C)
-+#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030)
-+#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034)
-+#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038)
-+#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C)
-+#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040)
-+#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044)
-+#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048)
-+#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C)
-+#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050)
-+#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054)
-+#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058)
-+#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C)
-+#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060)
-+#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064)
-+#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068)
-+#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C)
-+#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070)
-+#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074)
-+#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078)
-+#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C)
-+#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080)
-+#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084)
-+#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088)
-+#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C)
-+#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090)
-+#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094)
-+#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098)
-+#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C)
-+#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0)
-+#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4)
-+#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8)
-+#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC)
-+#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0)
-+#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4)
-+#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8)
-+#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC)
-+#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0)
-+#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4)
-+#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8)
-+#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC)
-+#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0)
-+#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4)
-+#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8)
-+#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC)
-+#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0)
-+#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4)
-+#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8)
-+#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC)
-+#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0)
-+#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4)
-+#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8)
-+#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC)
-+#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100)
-+#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104)
-+#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108)
-+#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C)
-+#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110)
-+#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114)
-+#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118)
-+#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C)
-+#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200)
-+#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204)
-+#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208)
-+#define QDMA_RST_CFG (QDMA_RST_IDX)
-+#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C)
-+#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210)
-+#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214)
-+#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218)
-+#define QFE_INT_STATUS (QDMA_INT_STS)
-+#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C)
-+#define QFE_INT_ENABLE (QDMA_INT_MASK)
-+#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220)
-+#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224)
-+#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228)
-+#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C)
-+#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230)
-+#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234)
-+#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238)
-+#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240)
-+#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244)
-+#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248)
-+#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C)
-+#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300)
-+#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304)
-+#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308)
-+#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310)
-+#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314)
-+#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318)
-+#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320)
-+#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324)
-+#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328)
-+#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C)
-+#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350)
-+#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354)
-+#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358)
-+#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C)
-+#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360)
-+#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364)
-+#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368)
-+#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C)
-+
-+
-+#endif/*MT7621 QDMA*/
-+
-+#else
-+
-+/* 1. Frame Engine Global Registers */
-+#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00)
-+#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04)
-+#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08)
-+#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C)
-+#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10)
-+#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14)
-+#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA
-+#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C)
-+
-+
-+/* 2. GDMA Registers */
-+#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00)
-+#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04)
-+#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08)
-+#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C)
-+#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10)
-+
-+#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00)
-+#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04)
-+#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08)
-+#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C)
-+#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10)
-+
-+/* 3. PSE */
-+#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00)
-+#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04)
-+#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08)
-+#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C)
-+#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0)
-+
-+/* 4. CDMA */
-+#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00)
-+#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04)
-+/* skip ppoe sid and vlan id definition */
-+
-+
-+/* 5. PDMA */
-+#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00)
-+#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04)
-+#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08)
-+
-+#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C)
-+
-+#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10)
-+#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14)
-+#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18)
-+#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C)
-+
-+#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20)
-+#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24)
-+#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28)
-+#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C)
-+
-+#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
-+#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
-+#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
-+#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
-+
-+#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50)
-+#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54)
-+#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58)
-+#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C)
-+
-+#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30)
-+#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34)
-+#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38)
-+#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C)
-+
-+#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40)
-+#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44)
-+#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48)
-+#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C)
-+
-+#endif
-+
-+#define DELAY_INT_INIT 0x84048404
-+#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT)
-+
-+
-+#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+
-+/* 6. Counter and Meter Table */
-+#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */
-+#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */
-+/* 0 ~ 63 */
-+
-+#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */
-+/* skip... */
-+#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC)
-+
-+#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */
-+#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */
-+#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */
-+#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */
-+
-+/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */
-+#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320)
-+#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324)
-+#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328)
-+#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C)
-+#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330)
-+#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334)
-+#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338)
-+#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C)
-+
-+#endif
-+
-+
-+/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */
-+#define PORT0_PKCOUNT (0xb01100e8)
-+#define PORT1_PKCOUNT (0xb01100ec)
-+#define PORT2_PKCOUNT (0xb01100f0)
-+#define PORT3_PKCOUNT (0xb01100f4)
-+#define PORT4_PKCOUNT (0xb01100f8)
-+#define PORT5_PKCOUNT (0xb01100fc)
-+
-+
-+// PHYS_TO_K1
-+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr)
-+
-+
-+#define sysRegRead(phys) \
-+ (*(volatile unsigned int *)PHYS_TO_K1(phys))
-+
-+#define sysRegWrite(phys, val) \
-+ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val))
-+
-+#define u_long unsigned long
-+#define u32 unsigned int
-+#define u16 unsigned short
-+
-+
-+/* ====================================== */
-+#define GDM1_DISPAD BIT(18)
-+#define GDM1_DISCRC BIT(17)
-+
-+//GDMA1 uni-cast frames destination port
-+#define GDM1_ICS_EN (0x1 << 22)
-+#define GDM1_TCS_EN (0x1 << 21)
-+#define GDM1_UCS_EN (0x1 << 20)
-+#define GDM1_JMB_EN (0x1 << 19)
-+#define GDM1_STRPCRC (0x1 << 16)
-+#define GDM1_UFRC_P_CPU (0 << 12)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_UFRC_P_PPE (4 << 12)
-+#else
-+#define GDM1_UFRC_P_PPE (6 << 12)
-+#endif
-+
-+//GDMA1 broad-cast MAC address frames
-+#define GDM1_BFRC_P_CPU (0 << 8)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_BFRC_P_PPE (4 << 8)
-+#else
-+#define GDM1_BFRC_P_PPE (6 << 8)
-+#endif
-+
-+//GDMA1 multi-cast MAC address frames
-+#define GDM1_MFRC_P_CPU (0 << 4)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_MFRC_P_PPE (4 << 4)
-+#else
-+#define GDM1_MFRC_P_PPE (6 << 4)
-+#endif
-+
-+//GDMA1 other MAC address frames destination port
-+#define GDM1_OFRC_P_CPU (0 << 0)
-+#if defined (CONFIG_RALINK_MT7621)
-+#define GDM1_OFRC_P_PPE (4 << 0)
-+#else
-+#define GDM1_OFRC_P_PPE (6 << 0)
-+#endif
-+
-+#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+/* checksum generator registers are removed */
-+#define ICS_GEN_EN (0 << 2)
-+#define UCS_GEN_EN (0 << 1)
-+#define TCS_GEN_EN (0 << 0)
-+#else
-+#define ICS_GEN_EN (1 << 2)
-+#define UCS_GEN_EN (1 << 1)
-+#define TCS_GEN_EN (1 << 0)
-+#endif
-+
-+// MDIO_CFG bit
-+#define MDIO_CFG_GP1_FC_TX (1 << 11)
-+#define MDIO_CFG_GP1_FC_RX (1 << 10)
-+
-+/* ====================================== */
-+/* ====================================== */
-+#define GP1_LNK_DWN BIT(9)
-+#define GP1_AN_FAIL BIT(8)
-+/* ====================================== */
-+/* ====================================== */
-+#define PSE_RESET BIT(0)
-+/* ====================================== */
-+#define PST_DRX_IDX1 BIT(17)
-+#define PST_DRX_IDX0 BIT(16)
-+#define PST_DTX_IDX3 BIT(3)
-+#define PST_DTX_IDX2 BIT(2)
-+#define PST_DTX_IDX1 BIT(1)
-+#define PST_DTX_IDX0 BIT(0)
-+
-+#define RX_2B_OFFSET BIT(31)
-+#define DESC_32B_EN BIT(8)
-+#define TX_WB_DDONE BIT(6)
-+#define RX_DMA_BUSY BIT(3)
-+#define TX_DMA_BUSY BIT(1)
-+#define RX_DMA_EN BIT(2)
-+#define TX_DMA_EN BIT(0)
-+
-+#define PDMA_BT_SIZE_4DWORDS (0<<4)
-+#define PDMA_BT_SIZE_8DWORDS (1<<4)
-+#define PDMA_BT_SIZE_16DWORDS (2<<4)
-+#define PDMA_BT_SIZE_32DWORDS (3<<4)
-+
-+/* Register bits.
-+ */
-+
-+#define MACCFG_RXEN (1<<2)
-+#define MACCFG_TXEN (1<<3)
-+#define MACCFG_PROMISC (1<<18)
-+#define MACCFG_RXMCAST (1<<19)
-+#define MACCFG_FDUPLEX (1<<20)
-+#define MACCFG_PORTSEL (1<<27)
-+#define MACCFG_HBEATDIS (1<<28)
-+
-+
-+#define DMACTL_SR (1<<1) /* Start/Stop Receive */
-+#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */
-+
-+#define DMACFG_SWR (1<<0) /* Software Reset */
-+#define DMACFG_BURST32 (32<<8)
-+
-+#define DMASTAT_TS 0x00700000 /* Transmit Process State */
-+#define DMASTAT_RS 0x000e0000 /* Receive Process State */
-+
-+#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL)
-+
-+
-+
-+/* Descriptor bits.
-+ */
-+#define R_OWN 0x80000000 /* Own Bit */
-+#define RD_RER 0x02000000 /* Receive End Of Ring */
-+#define RD_LS 0x00000100 /* Last Descriptor */
-+#define RD_ES 0x00008000 /* Error Summary */
-+#define RD_CHAIN 0x01000000 /* Chained */
-+
-+/* Word 0 */
-+#define T_OWN 0x80000000 /* Own Bit */
-+#define TD_ES 0x00008000 /* Error Summary */
-+
-+/* Word 1 */
-+#define TD_LS 0x40000000 /* Last Segment */
-+#define TD_FS 0x20000000 /* First Segment */
-+#define TD_TER 0x08000000 /* Transmit End Of Ring */
-+#define TD_CHAIN 0x01000000 /* Chained */
-+
-+
-+#define TD_SET 0x08000000 /* Setup Packet */
-+
-+
-+#define POLL_DEMAND 1
-+
-+#define RSTCTL (0x34)
-+#define RSTCTL_RSTENET1 (1<<19)
-+#define RSTCTL_RSTENET2 (1<<20)
-+
-+#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000
-+#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000
-+#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01
-+#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01
-+
-+// Define Whole FE Reset Register
-+#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34)
-+
-+/*=========================================
-+ PDMA RX Descriptor Format define
-+=========================================*/
-+
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T;
-+
-+struct _PDMA_RXD_INFO1_
-+{
-+ unsigned int PDP0;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T;
-+
-+struct _PDMA_RXD_INFO2_
-+{
-+ unsigned int PLEN1 : 14;
-+ unsigned int LS1 : 1;
-+ unsigned int TAG : 1;
-+ unsigned int PLEN0 : 14;
-+ unsigned int LS0 : 1;
-+ unsigned int DDONE_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T;
-+
-+struct _PDMA_RXD_INFO3_
-+{
-+ unsigned int VID:16;
-+ unsigned int TPID:16;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T;
-+
-+struct _PDMA_RXD_INFO4_
-+{
-+#if defined (CONFIG_RALINK_MT7620)
-+ unsigned int FOE_Entry : 14;
-+ unsigned int CRSN : 5;
-+ unsigned int SPORT : 3;
-+ unsigned int L4F : 1;
-+ unsigned int L4VLD : 1;
-+ unsigned int TACK : 1;
-+ unsigned int IP4F : 1;
-+ unsigned int IP4 : 1;
-+ unsigned int IP6 : 1;
-+ unsigned int UN_USE1 : 4;
-+#elif defined (CONFIG_RALINK_MT7621)
-+ unsigned int FOE_Entry : 14;
-+ unsigned int CRSN : 5;
-+ unsigned int SP : 4;
-+ unsigned int L4F : 1;
-+ unsigned int L4VLD : 1;
-+ unsigned int TACK : 1;
-+ unsigned int IP4F : 1;
-+ unsigned int IP4 : 1;
-+ unsigned int IP6 : 1;
-+ unsigned int UN_USE1 : 3;
-+#else
-+ unsigned int FOE_Entry : 14;
-+ unsigned int FVLD : 1;
-+ unsigned int UN_USE1 : 1;
-+ unsigned int AI : 8;
-+ unsigned int SP : 3;
-+ unsigned int AIS : 1;
-+ unsigned int L4F : 1;
-+ unsigned int IPF : 1;
-+ unsigned int L4FVLD_bit : 1;
-+ unsigned int IPFVLD_bit : 1;
-+#endif
-+};
-+
-+
-+struct PDMA_rxdesc {
-+ PDMA_RXD_INFO1_T rxd_info1;
-+ PDMA_RXD_INFO2_T rxd_info2;
-+ PDMA_RXD_INFO3_T rxd_info3;
-+ PDMA_RXD_INFO4_T rxd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int rxd_info5;
-+ unsigned int rxd_info6;
-+ unsigned int rxd_info7;
-+ unsigned int rxd_info8;
-+#endif
-+};
-+
-+/*=========================================
-+ PDMA TX Descriptor Format define
-+=========================================*/
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T;
-+
-+struct _PDMA_TXD_INFO1_
-+{
-+ unsigned int SDP0;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T;
-+
-+struct _PDMA_TXD_INFO2_
-+{
-+ unsigned int SDL1 : 14;
-+ unsigned int LS1_bit : 1;
-+ unsigned int BURST_bit : 1;
-+ unsigned int SDL0 : 14;
-+ unsigned int LS0_bit : 1;
-+ unsigned int DDONE_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T;
-+
-+struct _PDMA_TXD_INFO3_
-+{
-+ unsigned int SDP1;
-+};
-+//-------------------------------------------------
-+typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T;
-+
-+struct _PDMA_TXD_INFO4_
-+{
-+#if defined (CONFIG_RALINK_MT7620)
-+ unsigned int VPRI_VIDX : 8;
-+ unsigned int SIDX : 4;
-+ unsigned int INSP : 1;
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 5;
-+ unsigned int FP_BMAP : 8;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#elif defined (CONFIG_RALINK_MT7621)
-+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 6;
-+ unsigned int FPORT : 3;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#else
-+ unsigned int VPRI_VIDX : 8;
-+ unsigned int SIDX : 4;
-+ unsigned int INSP : 1;
-+ unsigned int RESV : 1;
-+ unsigned int UN_USE3 : 2;
-+ unsigned int QN : 3;
-+ unsigned int UN_USE2 : 1;
-+ unsigned int UDF : 4;
-+ unsigned int PN : 3;
-+ unsigned int UN_USE1 : 1;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+#endif
-+};
-+
-+
-+struct PDMA_txdesc {
-+ PDMA_TXD_INFO1_T txd_info1;
-+ PDMA_TXD_INFO2_T txd_info2;
-+ PDMA_TXD_INFO3_T txd_info3;
-+ PDMA_TXD_INFO4_T txd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int txd_info5;
-+ unsigned int txd_info6;
-+ unsigned int txd_info7;
-+ unsigned int txd_info8;
-+#endif
-+};
-+
-+
-+#if defined (CONFIG_RALINK_MT7621)
-+/*=========================================
-+ QDMA TX Descriptor Format define
-+=========================================*/
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T;
-+
-+struct _QDMA_TXD_INFO1_
-+{
-+ unsigned int SDP;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T;
-+
-+struct _QDMA_TXD_INFO2_
-+{
-+ unsigned int NDP;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T;
-+
-+struct _QDMA_TXD_INFO3_
-+{
-+ unsigned int QID : 4;
-+ unsigned int RESV : 10;
-+ unsigned int SWC_bit : 1;
-+ unsigned int BURST_bit : 1;
-+ unsigned int SDL : 14;
-+ unsigned int LS_bit : 1;
-+ unsigned int OWN_bit : 1;
-+};
-+//-------------------------------------------------
-+typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T;
-+
-+struct _QDMA_TXD_INFO4_
-+{
-+ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12)
-+ unsigned int RESV : 2;
-+ unsigned int UDF : 6;
-+ unsigned int FPORT : 3;
-+ unsigned int TSO : 1;
-+ unsigned int TUI_CO : 3;
-+};
-+
-+
-+struct QDMA_txdesc {
-+ QDMA_TXD_INFO1_T txd_info1;
-+ QDMA_TXD_INFO2_T txd_info2;
-+ QDMA_TXD_INFO3_T txd_info3;
-+ QDMA_TXD_INFO4_T txd_info4;
-+#ifdef CONFIG_32B_DESC
-+ unsigned int txd_info5;
-+ unsigned int txd_info6;
-+ unsigned int txd_info7;
-+ unsigned int txd_info8;
-+#endif
-+};
-+#endif
-+
-+#define phys_to_bus(a) (a & 0x1FFFFFFF)
-+
-+#define PHY_Enable_Auto_Nego 0x1000
-+#define PHY_Restart_Auto_Nego 0x0200
-+
-+/* PHY_STAT_REG = 1; */
-+#define PHY_Auto_Neco_Comp 0x0020
-+#define PHY_Link_Status 0x0004
-+
-+/* PHY_AUTO_NEGO_REG = 4; */
-+#define PHY_Cap_10_Half 0x0020
-+#define PHY_Cap_10_Full 0x0040
-+#define PHY_Cap_100_Half 0x0080
-+#define PHY_Cap_100_Full 0x0100
-+
-+/* proc definition */
-+
-+#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \
-+ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621)
-+#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c)
-+#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50)
-+#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54)
-+#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58)
-+#endif
-+
-+#define PROCREG_CONTROL_FILE "/var/run/procreg_control"
-+#if defined (CONFIG_RALINK_RT2880)
-+#define PROCREG_DIR "rt2880"
-+#elif defined (CONFIG_RALINK_RT3052)
-+#define PROCREG_DIR "rt3052"
-+#elif defined (CONFIG_RALINK_RT3352)
-+#define PROCREG_DIR "rt3352"
-+#elif defined (CONFIG_RALINK_RT5350)
-+#define PROCREG_DIR "rt5350"
-+#elif defined (CONFIG_RALINK_RT2883)
-+#define PROCREG_DIR "rt2883"
-+#elif defined (CONFIG_RALINK_RT3883)
-+#define PROCREG_DIR "rt3883"
-+#elif defined (CONFIG_RALINK_RT6855)
-+#define PROCREG_DIR "rt6855"
-+#elif defined (CONFIG_RALINK_MT7620)
-+#define PROCREG_DIR "mt7620"
-+#elif defined (CONFIG_RALINK_MT7621)
-+#define PROCREG_DIR "mt7621"
-+#elif defined (CONFIG_RALINK_MT7628)
-+#define PROCREG_DIR "mt7628"
-+#elif defined (CONFIG_RALINK_RT6855A)
-+#define PROCREG_DIR "rt6855a"
-+#else
-+#define PROCREG_DIR "rt2880"
-+#endif
-+#define PROCREG_SKBFREE "skb_free"
-+#define PROCREG_TXRING "tx_ring"
-+#define PROCREG_RXRING "rx_ring"
-+#define PROCREG_NUM_OF_TXD "num_of_txd"
-+#define PROCREG_TSO_LEN "tso_len"
-+#define PROCREG_LRO_STATS "lro_stats"
-+#define PROCREG_GMAC "gmac"
-+#define PROCREG_GMAC2 "gmac2"
-+#define PROCREG_CP0 "cp0"
-+#define PROCREG_RAQOS "qos"
-+#define PROCREG_READ_VAL "regread_value"
-+#define PROCREG_WRITE_VAL "regwrite_value"
-+#define PROCREG_ADDR "reg_addr"
-+#define PROCREG_CTL "procreg_control"
-+#define PROCREG_RXDONE_INTR "rxdone_intr_count"
-+#define PROCREG_ESW_INTR "esw_intr_count"
-+#define PROCREG_ESW_CNT "esw_cnt"
-+#define PROCREG_SNMP "snmp"
-+#if defined (TASKLET_WORKQUEUE_SW)
-+#define PROCREG_SCHE "schedule"
-+#endif
-+#define PROCREG_QDMA "qdma"
-+
-+struct rt2880_reg_op_data {
-+ char name[64];
-+ unsigned int reg_addr;
-+ unsigned int op;
-+ unsigned int reg_value;
-+};
-+
-+#ifdef CONFIG_RAETH_LRO
-+struct lro_counters {
-+ u32 lro_aggregated;
-+ u32 lro_flushed;
-+ u32 lro_no_desc;
-+};
-+
-+struct lro_para_struct {
-+ unsigned int lan_ip1;
-+};
-+
-+#endif // CONFIG_RAETH_LRO //
-+
-+
-+
-+
-+typedef struct end_device
-+{
-+
-+ unsigned int tx_cpu_owner_idx0;
-+ unsigned int rx_cpu_owner_idx0;
-+ unsigned int fe_int_status;
-+ unsigned int tx_full;
-+
-+#if !defined (CONFIG_RAETH_QDMA)
-+ unsigned int phy_tx_ring0;
-+#else
-+ /* QDMA Tx PTR */
-+ struct sk_buff *free_skb[NUM_TX_DESC];
-+ unsigned int tx_dma_ptr;
-+ unsigned int tx_cpu_ptr;
-+ unsigned int free_txd_num;
-+ unsigned int free_txd_head;
-+ unsigned int free_txd_tail;
-+ struct QDMA_txdesc *txd_pool;
-+ dma_addr_t phy_txd_pool;
-+// unsigned int phy_txd_pool;
-+ unsigned int txd_pool_info[NUM_TX_DESC];
-+#endif
-+
-+ unsigned int phy_rx_ring0, phy_rx_ring1;
-+
-+#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \
-+ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \
-+ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \
-+ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+ //send signal to user application to notify link status changed
-+ struct work_struct kill_sig_wq;
-+#endif
-+
-+ struct work_struct reset_task;
-+#ifdef WORKQUEUE_BH
-+ struct work_struct rx_wq;
-+#else
-+#if defined (TASKLET_WORKQUEUE_SW)
-+ struct work_struct rx_wq;
-+#endif
-+#endif // WORKQUEUE_BH //
-+
-+#if defined(CONFIG_RAETH_QOS)
-+ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC];
-+ unsigned int free_idx[NUM_TX_RINGS];
-+#else
-+ struct sk_buff* skb_free[NUM_TX_DESC];
-+ unsigned int free_idx;
-+#endif
-+
-+ struct net_device_stats stat; /* The new statistics table. */
-+ spinlock_t page_lock; /* Page register locks */
-+ struct PDMA_txdesc *tx_ring0;
-+#if defined(CONFIG_RAETH_QOS)
-+ struct PDMA_txdesc *tx_ring1;
-+ struct PDMA_txdesc *tx_ring2;
-+ struct PDMA_txdesc *tx_ring3;
-+#endif
-+ struct PDMA_rxdesc *rx_ring0;
-+ struct sk_buff *netrx0_skbuf[NUM_RX_DESC];
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ struct PDMA_rxdesc *rx_ring1;
-+ struct sk_buff *netrx1_skbuf[NUM_RX_DESC];
-+#endif
-+#ifdef CONFIG_RAETH_NAPI
-+ atomic_t irq_sem;
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
-+ struct napi_struct napi;
-+#endif
-+#endif
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ struct net_device *PseudoDev;
-+ unsigned int isPseudo;
-+#endif
-+#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/
-+ struct mii_if_info mii_info;
-+#endif
-+#ifdef CONFIG_RAETH_LRO
-+ struct lro_counters lro_counters;
-+ struct net_lro_mgr lro_mgr;
-+ struct net_lro_desc lro_arr[8];
-+#endif
-+#ifdef CONFIG_RAETH_HW_VLAN_RX
-+ struct vlan_group *vlgrp;
-+#endif
-+} END_DEVICE, *pEND_DEVICE;
-+
-+
-+#define RAETH_VERSION "v3.0"
-+
-+#endif
-+
-+#ifdef CONFIG_RAETH_QDMA
-+#define DMA_GLO_CFG QDMA_GLO_CFG
-+#define GDMA1_FWD_PORT 0x5555
-+#define GDMA2_FWD_PORT 0x5555
-+#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0
-+#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1
-+#define RAETH_FE_INT_STATUS QFE_INT_STATUS
-+#define RAETH_FE_INT_ALL QFE_INT_ALL
-+#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE
-+#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT
-+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT
-+#define RAETH_TX_DLY_INT RLS_DLY_INT
-+#define RAETH_TX_DONE_INT0 RLS_DONE_INT
-+#define RAETH_DLY_INT_CFG QDMA_DELAY_INT
-+#else
-+#define DMA_GLO_CFG PDMA_GLO_CFG
-+#define GDMA1_FWD_PORT 0x0000
-+#define GDMA2_FWD_PORT 0x0000
-+#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0
-+#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1
-+#define RAETH_FE_INT_STATUS FE_INT_STATUS
-+#define RAETH_FE_INT_ALL FE_INT_ALL
-+#define RAETH_FE_INT_ENABLE FE_INT_ENABLE
-+#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT
-+#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3
-+#define RAETH_TX_DLY_INT TX_DLY_INT
-+#define RAETH_TX_DONE_INT0 TX_DONE_INT0
-+#define RAETH_DLY_INT_CFG DLY_INT_CFG
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_ioctl.h
-@@ -0,0 +1,92 @@
-+#ifndef _RAETH_IOCTL_H
-+#define _RAETH_IOCTL_H
-+
-+/* ioctl commands */
-+#define RAETH_ESW_REG_READ 0x89F1
-+#define RAETH_ESW_REG_WRITE 0x89F2
-+#define RAETH_MII_READ 0x89F3
-+#define RAETH_MII_WRITE 0x89F4
-+#define RAETH_ESW_INGRESS_RATE 0x89F5
-+#define RAETH_ESW_EGRESS_RATE 0x89F6
-+#define RAETH_ESW_PHY_DUMP 0x89F7
-+#define RAETH_QDMA_REG_READ 0x89F8
-+#define RAETH_QDMA_REG_WRITE 0x89F9
-+#define RAETH_QDMA_QUEUE_MAPPING 0x89FA
-+#define RAETH_QDMA_READ_CPU_CLK 0x89FB
-+
-+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
-+
-+#define REG_ESW_WT_MAC_MFC 0x10
-+#define REG_ESW_WT_MAC_ATA1 0x74
-+#define REG_ESW_WT_MAC_ATA2 0x78
-+#define REG_ESW_WT_MAC_ATWD 0x7C
-+#define REG_ESW_WT_MAC_ATC 0x80
-+
-+#define REG_ESW_TABLE_TSRA1 0x84
-+#define REG_ESW_TABLE_TSRA2 0x88
-+#define REG_ESW_TABLE_ATRD 0x8C
-+
-+
-+#define REG_ESW_VLAN_VTCR 0x90
-+#define REG_ESW_VLAN_VAWD1 0x94
-+#define REG_ESW_VLAN_VAWD2 0x98
-+
-+
-+#define REG_ESW_VLAN_ID_BASE 0x100
-+
-+//#define REG_ESW_VLAN_ID_BASE 0x50
-+#define REG_ESW_VLAN_MEMB_BASE 0x70
-+#define REG_ESW_TABLE_SEARCH 0x24
-+#define REG_ESW_TABLE_STATUS0 0x28
-+#define REG_ESW_TABLE_STATUS1 0x2C
-+#define REG_ESW_TABLE_STATUS2 0x30
-+#define REG_ESW_WT_MAC_AD0 0x34
-+#define REG_ESW_WT_MAC_AD1 0x38
-+#define REG_ESW_WT_MAC_AD2 0x3C
-+
-+#else
-+/* rt3052 embedded ethernet switch registers */
-+#define REG_ESW_VLAN_ID_BASE 0x50
-+#define REG_ESW_VLAN_MEMB_BASE 0x70
-+#define REG_ESW_TABLE_SEARCH 0x24
-+#define REG_ESW_TABLE_STATUS0 0x28
-+#define REG_ESW_TABLE_STATUS1 0x2C
-+#define REG_ESW_TABLE_STATUS2 0x30
-+#define REG_ESW_WT_MAC_AD0 0x34
-+#define REG_ESW_WT_MAC_AD1 0x38
-+#define REG_ESW_WT_MAC_AD2 0x3C
-+#endif
-+
-+
-+#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628)
-+#define REG_ESW_MAX 0x16C
-+#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620)
-+#define REG_ESW_MAX 0x7FFFF
-+#else //RT305x, RT3350
-+#define REG_ESW_MAX 0xFC
-+#endif
-+#define REG_HQOS_MAX 0x3FFF
-+
-+
-+typedef struct rt3052_esw_reg {
-+ unsigned int off;
-+ unsigned int val;
-+} esw_reg;
-+
-+typedef struct ralink_mii_ioctl_data {
-+ __u32 phy_id;
-+ __u32 reg_num;
-+ __u32 val_in;
-+ __u32 val_out;
-+} ra_mii_ioctl_data;
-+
-+typedef struct rt335x_esw_reg {
-+ unsigned int on_off;
-+ unsigned int port;
-+ unsigned int bw;/*Mbps*/
-+} esw_rate;
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_mac.c
-@@ -0,0 +1,98 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/signal.h>
-+#include <linux/irq.h>
-+#include <linux/ctype.h>
-+
-+#include <asm/io.h>
-+#include <asm/bitops.h>
-+#include <asm/io.h>
-+#include <asm/dma.h>
-+
-+#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */
-+
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+//#include <linux/mca.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/proc_fs.h>
-+#include <asm/uaccess.h>
-+
-+#if defined(CONFIG_USER_SNMPD)
-+#include <linux/seq_file.h>
-+#endif
-+
-+
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+
-+extern struct net_device *dev_raether;
-+
-+
-+void ra2880stop(END_DEVICE *ei_local)
-+{
-+ unsigned int regValue;
-+ printk("ra2880stop()...");
-+
-+ regValue = sysRegRead(PDMA_GLO_CFG);
-+ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN);
-+ sysRegWrite(PDMA_GLO_CFG, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue);
-+ printk("Done\n");
-+}
-+
-+void ei_irq_clear(void)
-+{
-+ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF);
-+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF);
-+}
-+
-+void rt2880_gmac_hard_reset(void)
-+{
-+ sysRegWrite(RSTCTRL, RALINK_FE_RST);
-+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST);
-+ sysRegWrite(RSTCTRL, 0);
-+ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0);
-+}
-+
-+void ra2880EnableInterrupt()
-+{
-+ unsigned int regValue = sysRegRead(FE_INT_ENABLE);
-+ sysRegWrite(FE_INT_ENABLE, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue);
-+}
-+
-+void ra2880MacAddressSet(unsigned char p[6])
-+{
-+ unsigned long regValue;
-+
-+ regValue = (p[0] << 8) | (p[1]);
-+ sysRegWrite(GDMA1_MAC_ADRH, regValue);
-+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue);
-+
-+ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5];
-+ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue);
-+ sysRegWrite(GDMA1_MAC_ADRL, regValue);
-+
-+ return;
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/ra_mac.h
-@@ -0,0 +1,35 @@
-+#ifndef RA_MAC_H
-+#define RA_MAC_H
-+
-+void ra2880stop(END_DEVICE *ei_local);
-+void ra2880MacAddressSet(unsigned char p[6]);
-+void ra2880Mac2AddressSet(unsigned char p[6]);
-+void ethtool_init(struct net_device *dev);
-+
-+void ra2880EnableInterrupt(void);
-+
-+void dump_qos(void);
-+void dump_reg(void);
-+void dump_cp0(void);
-+
-+int debug_proc_init(void);
-+void debug_proc_exit(void);
-+
-+#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621)
-+void enable_auto_negotiate(int unused);
-+#else
-+void enable_auto_negotiate(int ge);
-+#endif
-+
-+void rt2880_gmac_hard_reset(void);
-+
-+int TsoLenUpdate(int tso_len);
-+int NumOfTxdUpdate(int num_of_txd);
-+
-+#ifdef CONFIG_RAETH_LRO
-+int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed);
-+#endif
-+int getnext(const char *src, int separator, char *dest);
-+int str_to_ip(unsigned int *ip, const char *str);
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether.c
-@@ -0,0 +1,693 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+
-+#include <asm/rt2880/rt_mmap.h>
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+#include "ra_ioctl.h"
-+
-+static int rt2880_eth_recv(struct net_device* dev);
-+int reg_dbg = 0;
-+
-+void setup_internal_gsw(void);
-+
-+#define MAX_RX_LENGTH 1536
-+
-+struct net_device *dev_raether;
-+
-+static int rx_dma_owner_idx;
-+static int rx_dma_owner_idx0;
-+static int pending_recv;
-+static struct PDMA_rxdesc *rx_ring;
-+static unsigned long tx_ring_full=0;
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern int fe_dma_init(struct net_device *dev);
-+extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no);
-+extern void ei_xmit_housekeeping(unsigned long unused);
-+extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no);
-+
-+static int ei_set_mac_addr(struct net_device *dev, void *p)
-+{
-+ struct sockaddr *addr = p;
-+
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ if(netif_running(dev))
-+ return -EBUSY;
-+
-+ ra2880MacAddressSet(addr->sa_data);
-+ return 0;
-+}
-+
-+
-+void set_fe_dma_glo_cfg(void)
-+{
-+ int dma_glo_cfg=0;
-+
-+ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS);
-+
-+ dma_glo_cfg |= (RX_2B_OFFSET);
-+
-+ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg);
-+}
-+
-+int forward_config(struct net_device *dev)
-+{
-+ unsigned int regVal, regCsg;
-+
-+ regVal = sysRegRead(GDMA1_FWD_CFG);
-+ regCsg = sysRegRead(CDMA_CSG_CFG);
-+
-+ //set unicast/multicast/broadcast frame to cpu
-+ regVal &= ~0xFFFF;
-+ regVal |= GDMA1_FWD_PORT;
-+ regCsg &= ~0x7;
-+
-+ //disable ipv4 header checksum check
-+ regVal &= ~GDM1_ICS_EN;
-+ regCsg &= ~ICS_GEN_EN;
-+
-+ //disable tcp checksum check
-+ regVal &= ~GDM1_TCS_EN;
-+ regCsg &= ~TCS_GEN_EN;
-+
-+ //disable udp checksum check
-+ regVal &= ~GDM1_UCS_EN;
-+ regCsg &= ~UCS_GEN_EN;
-+
-+
-+ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */
-+
-+
-+ sysRegWrite(GDMA1_FWD_CFG, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal);
-+ sysRegWrite(CDMA_CSG_CFG, regCsg);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg);
-+
-+ regVal = 0x1;
-+ sysRegWrite(FE_RST_GL, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal);
-+ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1);
-+
-+ regCsg = sysRegRead(CDMA_CSG_CFG);
-+ printk("CDMA_CSG_CFG = %0X\n",regCsg);
-+ regVal = sysRegRead(GDMA1_FWD_CFG);
-+ printk("GDMA1_FWD_CFG = %0X\n",regVal);
-+
-+ return 1;
-+}
-+
-+
-+static int rt2880_eth_recv(struct net_device* dev)
-+{
-+ struct sk_buff *skb, *rx_skb;
-+ unsigned int length = 0;
-+ unsigned long RxProcessed;
-+
-+
-+ int bReschedule = 0;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+
-+
-+ RxProcessed = 0;
-+
-+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
-+
-+ for ( ; ; ) {
-+
-+ if (RxProcessed++ > NUM_RX_MAX_PROCESS)
-+ {
-+ // need to reschedule rx handle
-+ bReschedule = 1;
-+ break;
-+ }
-+
-+
-+
-+ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) {
-+ rx_ring = ei_local->rx_ring0;
-+ rx_dma_owner_idx = rx_dma_owner_idx0;
-+ } else {
-+ break;
-+ }
-+
-+ /* skb processing */
-+ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0;
-+ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx];
-+ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data;
-+ rx_skb->len = length;
-+
-+ rx_skb->data += NET_IP_ALIGN;
-+
-+ rx_skb->tail = rx_skb->data + length;
-+
-+ rx_skb->dev = dev;
-+ rx_skb->protocol = eth_type_trans(rx_skb,dev);
-+
-+ rx_skb->ip_summed = CHECKSUM_NONE;
-+
-+
-+ /* We have to check the free memory size is big enough
-+ * before pass the packet to cpu*/
-+ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC);
-+
-+ if (unlikely(skb == NULL))
-+ {
-+ printk(KERN_ERR "skb not available...\n");
-+ ei_local->stat.rx_dropped++;
-+ bReschedule = 1;
-+ break;
-+ }
-+
-+ {
-+ netif_rx(rx_skb);
-+ }
-+
-+ {
-+ ei_local->stat.rx_packets++;
-+ ei_local->stat.rx_bytes += length;
-+ }
-+
-+
-+ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0;
-+ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0;
-+ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+
-+ /* Move point to next RXD which wants to alloc*/
-+ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx);
-+ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb;
-+
-+ /* Update to Next packet point that was received.
-+ */
-+ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC;
-+ } /* for */
-+
-+ return bReschedule;
-+}
-+
-+void ei_receive_workq(struct work_struct *work)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long reg_int_mask=0;
-+ int bReschedule=0;
-+
-+
-+ if(tx_ring_full==0){
-+ bReschedule = rt2880_eth_recv(dev);
-+ if(bReschedule)
-+ {
-+ schedule_work(&ei_local->rx_wq);
-+ }else{
-+ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT);
-+ }
-+ }else{
-+ schedule_work(&ei_local->rx_wq);
-+ }
-+}
-+
-+
-+static irqreturn_t ei_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long reg_int_val;
-+ unsigned long reg_int_mask=0;
-+ unsigned int recv = 0;
-+ unsigned int transmit __maybe_unused = 0;
-+ unsigned long flags;
-+
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ if (dev == NULL)
-+ {
-+ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0);
-+ return IRQ_NONE;
-+ }
-+
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS);
-+
-+ if((reg_int_val & RX_DLY_INT))
-+ recv = 1;
-+
-+ if (reg_int_val & RAETH_TX_DLY_INT)
-+ transmit = 1;
-+
-+ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT);
-+
-+ ei_xmit_housekeeping(0);
-+
-+ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0))
-+ {
-+ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT));
-+ pending_recv=0;
-+ schedule_work(&ei_local->rx_wq);
-+ }
-+ else if (recv == 1 && tx_ring_full==1)
-+ {
-+ pending_recv=1;
-+ }
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void esw_link_status_changed(int port_no, void *dev_id)
-+{
-+ unsigned int reg_val;
-+ mii_mgr_read(31, (0x3008 + (port_no*0x100)), &reg_val);
-+ if(reg_val & 0x1) {
-+ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no);
-+ } else {
-+ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no);
-+ }
-+}
-+
-+
-+static irqreturn_t esw_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long flags;
-+ unsigned int reg_int_val;
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ mii_mgr_read(31, 0x700c, &reg_int_val);
-+
-+ if (reg_int_val & P4_LINK_CH) {
-+ esw_link_status_changed(4, dev_id);
-+ }
-+
-+ if (reg_int_val & P3_LINK_CH) {
-+ esw_link_status_changed(3, dev_id);
-+ }
-+ if (reg_int_val & P2_LINK_CH) {
-+ esw_link_status_changed(2, dev_id);
-+ }
-+ if (reg_int_val & P1_LINK_CH) {
-+ esw_link_status_changed(1, dev_id);
-+ }
-+ if (reg_int_val & P0_LINK_CH) {
-+ esw_link_status_changed(0, dev_id);
-+ }
-+
-+ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+ return IRQ_HANDLED;
-+}
-+
-+
-+
-+static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev)
-+{
-+ return ei_start_xmit(skb, dev, 1);
-+}
-+
-+static int ei_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ unsigned long flags;
-+ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure
-+
-+ if ( ei_local == NULL ) {
-+ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name);
-+ return -ENXIO;
-+ }
-+
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+
-+ if ( (new_mtu > 4096) || (new_mtu < 64)) {
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ if ( new_mtu > 1500 ) {
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ dev->mtu = new_mtu;
-+
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+
-+static const struct net_device_ops ei_netdev_ops = {
-+ .ndo_init = rather_probe,
-+ .ndo_open = ei_open,
-+ .ndo_stop = ei_close,
-+ .ndo_start_xmit = ei_start_xmit_fake,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_change_mtu = ei_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+};
-+
-+void ra2880_setup_dev_fptable(struct net_device *dev)
-+{
-+ RAETH_PRINT(__FUNCTION__ "is called!\n");
-+
-+ dev->netdev_ops = &ei_netdev_ops;
-+#define TX_TIMEOUT (5*HZ)
-+ dev->watchdog_timeo = TX_TIMEOUT;
-+
-+}
-+
-+void fe_reset(void)
-+{
-+ u32 val;
-+ val = sysRegRead(RSTCTRL);
-+
-+ val = val | RALINK_FE_RST;
-+ sysRegWrite(RSTCTRL, val);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
-+ val = val & ~(RALINK_FE_RST);
-+ sysRegWrite(RSTCTRL, val);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val);
-+}
-+
-+void ei_reset_task(struct work_struct *work)
-+{
-+ struct net_device *dev = dev_raether;
-+
-+ ei_close(dev);
-+ ei_open(dev);
-+
-+ return;
-+}
-+
-+void ei_tx_timeout(struct net_device *dev)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+
-+ schedule_work(&ei_local->reset_task);
-+}
-+
-+int __init rather_probe(struct net_device *dev)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct sockaddr addr;
-+ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80};
-+
-+ fe_reset();
-+ net_srandom(jiffies);
-+ memcpy(addr.sa_data, mac_addr01234, 5);
-+ addr.sa_data[5] = net_random()&0xFF;
-+ ei_set_mac_addr(dev, &addr);
-+ spin_lock_init(&ei_local->page_lock);
-+ ether_setup(dev);
-+
-+ return 0;
-+}
-+
-+
-+int ei_open(struct net_device *dev)
-+{
-+ int i, err;
-+ unsigned long flags;
-+ END_DEVICE *ei_local;
-+
-+
-+ if (!try_module_get(THIS_MODULE))
-+ {
-+ printk("%s: Cannot reserve module\n", __FUNCTION__);
-+ return -1;
-+ }
-+ printk("Raeth %s (",RAETH_VERSION);
-+ printk("Workqueue");
-+
-+ printk(")\n");
-+ ei_local = netdev_priv(dev); // get device pointer from System
-+ // unsigned int flags;
-+
-+ if (ei_local == NULL)
-+ {
-+ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name);
-+ return -ENXIO;
-+ }
-+
-+ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */
-+ for ( i = 0; i < NUM_RX_DESC; i++)
-+ {
-+ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN);
-+ if (ei_local->netrx0_skbuf[i] == NULL ) {
-+ printk("rx skbuff buffer allocation failed!");
-+ } else {
-+ }
-+ }
-+
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+ fe_dma_init(dev);
-+ fe_sw_init(); //initialize fe and switch register
-+ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open
-+ if (err)
-+ return err;
-+
-+ if ( dev->dev_addr != NULL) {
-+ ra2880MacAddressSet((void *)(dev->dev_addr));
-+ } else {
-+ printk("dev->dev_addr is empty !\n");
-+ }
-+ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr
-+ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev);
-+ if (err)
-+ return err;
-+
-+ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT);
-+ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT);
-+
-+ INIT_WORK(&ei_local->reset_task, ei_reset_task);
-+
-+ INIT_WORK(&ei_local->rx_wq, ei_receive_workq);
-+
-+ netif_start_queue(dev);
-+
-+
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+
-+ forward_config(dev);
-+ return 0;
-+}
-+
-+int ei_close(struct net_device *dev)
-+{
-+ int i;
-+ END_DEVICE *ei_local = netdev_priv(dev); // device pointer
-+ unsigned long flags;
-+ spin_lock_irqsave(&(ei_local->page_lock), flags);
-+
-+ cancel_work_sync(&ei_local->reset_task);
-+ netif_stop_queue(dev);
-+ ra2880stop(ei_local);
-+ msleep(10);
-+
-+ cancel_work_sync(&ei_local->rx_wq);
-+ free_irq(dev->irq, dev);
-+ free_irq(31, dev);
-+ for ( i = 0; i < NUM_RX_DESC; i++)
-+ {
-+ if (ei_local->netrx0_skbuf[i] != NULL) {
-+ dev_kfree_skb(ei_local->netrx0_skbuf[i]);
-+ ei_local->netrx0_skbuf[i] = NULL;
-+ }
-+ }
-+ if (ei_local->tx_ring0 != NULL) {
-+ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0);
-+ }
-+ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0);
-+
-+ printk("Free TX/RX Ring Memory!\n");
-+
-+// fe_reset();
-+ spin_unlock_irqrestore(&(ei_local->page_lock), flags);
-+
-+ module_put(THIS_MODULE);
-+ return 0;
-+}
-+
-+
-+void setup_internal_gsw(void)
-+{
-+ u32 i;
-+ u32 regValue;
-+
-+ /* reduce RGMII2 PAD driving strength */
-+ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4);
-+
-+ //RGMII1=Normal mode
-+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14);
-+
-+ //GMAC1= RGMII mode
-+ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12);
-+
-+ //enable MDIO to control MT7530
-+ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60));
-+ regValue &= ~(0x3 << 12);
-+ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue;
-+
-+ for(i=0;i<=4;i++)
-+ {
-+ //turn off PHY
-+ mii_mgr_read(i, 0x0 ,&regValue);
-+ regValue |= (0x1<<11);
-+ mii_mgr_write(i, 0x0, regValue);
-+ }
-+ mii_mgr_write(31, 0x7000, 0x3); //reset switch
-+ udelay(10);
-+
-+ if(sysRegRead(0xbe00000c)==0x00030101) {
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b);
-+ mii_mgr_write(31, 0x3600, 0x5e30b);
-+ } else {
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b);
-+ mii_mgr_write(31, 0x3600, 0x5e33b);
-+ }
-+
-+ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down)
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000);
-+
-+ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/
-+ mii_mgr_read(31, 0x7804 ,&regValue);
-+ regValue &= ~(1<<8); //Enable Port 6
-+ regValue |= (1<<6); //Disable Port 5
-+ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY
-+
-+ regValue |= (1<<16);//change HW-TRAP
-+ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue);
-+ mii_mgr_write(31, 0x7804 ,regValue);
-+ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10);
-+ regValue = (regValue >> 6) & 0x7;
-+ if(regValue >= 6) { //25Mhz Xtal
-+ /* do nothing */
-+ } else if(regValue >=3) { //40Mhz
-+
-+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock
-+ mii_mgr_write(0, 14, 0x410);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x0);
-+
-+ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL
-+ mii_mgr_write(0, 14, 0x40d);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x2020);
-+
-+ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz
-+ mii_mgr_write(0, 14, 0x40e);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x119);
-+
-+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL
-+ mii_mgr_write(0, 14, 0x40d);
-+ mii_mgr_write(0, 13, 0x401f);
-+ mii_mgr_write(0, 14, 0x2820);
-+
-+ udelay(20); //suggest by CD
-+
-+ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock
-+ mii_mgr_write(0, 14, 0x410);
-+ mii_mgr_write(0, 13, 0x401f);
-+ }else { //20Mhz Xtal
-+
-+ /* TODO */
-+
-+ }
-+ mii_mgr_write(0, 14, 0x1); /*RGMII*/
-+
-+#if 1
-+ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M
-+ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M
-+#else
-+ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M
-+ mii_mgr_write(31, 0x7b04, 0x14); // for 100M
-+#endif
-+ /*Tx Driving*/
-+ mii_mgr_write(31, 0x7a54, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a64, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a74, 0x44); //lower driving
-+ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving
-+
-+ for(i=0;i<=4;i++)
-+ {
-+ //turn on PHY
-+ mii_mgr_read(i, 0x0 ,&regValue);
-+ regValue &= ~(0x1<<11);
-+ mii_mgr_write(i, 0x0, regValue);
-+ }
-+
-+ mii_mgr_read(31, 0x7808 ,&regValue);
-+ regValue |= (3<<16); //Enable INTR
-+ mii_mgr_write(31, 0x7808 ,regValue);
-+}
-+
-+int __init ra2882eth_init(void)
-+{
-+ int ret;
-+ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE));
-+ if (!dev)
-+ return -ENOMEM;
-+
-+ strcpy(dev->name, DEV_NAME);
-+ dev->irq = IRQ_ENET0;
-+ dev->addr_len = 6;
-+ dev->base_addr = RALINK_FRAME_ENGINE_BASE;
-+
-+ rather_probe(dev);
-+ ra2880_setup_dev_fptable(dev);
-+
-+ if ( register_netdev(dev) != 0) {
-+ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n");
-+ return -ENXIO;
-+ }
-+ ret = 0;
-+
-+ dev_raether = dev;
-+ return ret;
-+}
-+
-+void fe_sw_init(void)
-+{
-+ setup_internal_gsw();
-+}
-+
-+
-+void ra2882eth_cleanup_module(void)
-+{
-+}
-+EXPORT_SYMBOL(set_fe_dma_glo_cfg);
-+module_init(ra2882eth_init);
-+module_exit(ra2882eth_cleanup_module);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether.h
-@@ -0,0 +1,92 @@
-+#ifndef RA2882ETHEND_H
-+#define RA2882ETHEND_H
-+
-+#ifdef DSP_VIA_NONCACHEABLE
-+#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */
-+#else
-+#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */
-+#endif
-+
-+#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000))
-+#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800))
-+
-+#if defined(CONFIG_RALINK_RT2880)
-+#define NUM_TX_RINGS 1
-+#else
-+#define NUM_TX_RINGS 4
-+#endif
-+#ifdef MEMORY_OPTIMIZATION
-+#ifdef CONFIG_RAETH_ROUTER
-+#define NUM_RX_DESC 128
-+#define NUM_TX_DESC 128
-+#elif CONFIG_RT_3052_ESW
-+#define NUM_RX_DESC 64
-+#define NUM_TX_DESC 64
-+#else
-+#define NUM_RX_DESC 128
-+#define NUM_TX_DESC 128
-+#endif
-+//#define NUM_RX_MAX_PROCESS 32
-+#define NUM_RX_MAX_PROCESS 64
-+#else
-+#if defined (CONFIG_RAETH_ROUTER)
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#elif defined (CONFIG_RT_3052_ESW)
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#else
-+#define NUM_RX_DESC 256
-+#define NUM_TX_DESC 256
-+#endif
-+#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620)
-+#define NUM_RX_MAX_PROCESS 2
-+#else
-+#define NUM_RX_MAX_PROCESS 16
-+#endif
-+#endif
-+
-+#define DEV_NAME "eth0"
-+#define DEV2_NAME "eth3"
-+
-+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621)
-+#define GMAC0_OFFSET 0xE000
-+#define GMAC2_OFFSET 0xE006
-+#else
-+#define GMAC0_OFFSET 0x28
-+#define GMAC2_OFFSET 0x22
-+#endif
-+
-+#if defined(CONFIG_RALINK_RT6855A)
-+#define IRQ_ENET0 22
-+#else
-+#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */
-+#endif
-+
-+#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS))
-+#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg
-+
-+//#define RAETH_DEBUG
-+#ifdef RAETH_DEBUG
-+#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args)
-+#else
-+#define RAETH_PRINT(fmt, args...) { }
-+#endif
-+
-+struct net_device_stats *ra_get_stats(struct net_device *dev);
-+
-+void ei_tx_timeout(struct net_device *dev);
-+int rather_probe(struct net_device *dev);
-+int ei_open(struct net_device *dev);
-+int ei_close(struct net_device *dev);
-+
-+int ra2882eth_init(void);
-+void ra2882eth_cleanup_module(void);
-+
-+void ei_xmit_housekeeping(unsigned long data);
-+
-+u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data);
-+u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data);
-+void fe_sw_init(void);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether_pdma.c
-@@ -0,0 +1,212 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <asm/rt2880/rt_mmap.h>
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+
-+#define MAX_RX_LENGTH 1536
-+
-+extern int reg_dbg;
-+extern struct net_device *dev_raether;
-+static unsigned long tx_ring_full=0;
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern void set_fe_dma_glo_cfg(void);
-+
-+int fe_dma_init(struct net_device *dev)
-+{
-+
-+ int i;
-+ unsigned int regVal;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ while(1)
-+ {
-+ regVal = sysRegRead(PDMA_GLO_CFG);
-+ if((regVal & RX_DMA_BUSY))
-+ {
-+ printk("\n RX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ if((regVal & TX_DMA_BUSY))
-+ {
-+ printk("\n TX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ break;
-+ }
-+
-+ for (i=0;i<NUM_TX_DESC;i++){
-+ ei_local->skb_free[i]=0;
-+ }
-+ ei_local->free_idx =0;
-+ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0);
-+ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0);
-+
-+ for (i=0; i < NUM_TX_DESC; i++) {
-+ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc));
-+ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1;
-+ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1;
-+
-+ }
-+
-+ /* Initial RX Ring 0*/
-+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
-+
-+
-+ regVal = sysRegRead(PDMA_GLO_CFG);
-+ regVal &= 0x000000FF;
-+ sysRegWrite(PDMA_GLO_CFG, regVal);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal);
-+
-+ regVal=sysRegRead(PDMA_GLO_CFG);
-+
-+ /* Tell the adapter where the TX/RX rings are located. */
-+ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0));
-+ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC));
-+ sysRegWrite(TX_CTX_IDX0, 0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0);
-+ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0);
-+
-+ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0);
-+ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0);
-+
-+ set_fe_dma_glo_cfg();
-+
-+ return 1;
-+}
-+
-+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
-+{
-+ unsigned int length=skb->len;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0);
-+
-+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
-+ {
-+ ei_local->stat.tx_errors++;
-+ }
-+
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data);
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length;
-+ if (gmac_no == 1) {
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1;
-+ }else {
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2;
-+ }
-+ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0;
-+ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC;
-+ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0)
-+ {
-+ ei_local->stat.tx_errors++;
-+ }
-+ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0));
-+
-+ {
-+ ei_local->stat.tx_packets++;
-+ ei_local->stat.tx_bytes += length;
-+ }
-+
-+ return length;
-+}
-+
-+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long flags;
-+ unsigned long tx_cpu_owner_idx;
-+ unsigned int tx_cpu_owner_idx_next;
-+ unsigned int num_of_txd;
-+ unsigned int tx_cpu_owner_idx_next2;
-+
-+ dev->trans_start = jiffies; /* save the timestamp */
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0);
-+ num_of_txd = 1;
-+ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC;
-+
-+ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){
-+ rt2880_eth_send(dev, skb, gmac_no);
-+
-+ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC;
-+
-+ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){
-+ }
-+ }else {
-+ ei_local->stat.tx_dropped++;
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+
-+ ei_local->skb_free[tx_cpu_owner_idx] = skb;
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+void ei_xmit_housekeeping(unsigned long unused)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct PDMA_txdesc *tx_desc;
-+ unsigned long skb_free_idx;
-+ unsigned long tx_dtx_idx __maybe_unused;
-+ unsigned long reg_int_mask=0;
-+
-+ tx_dtx_idx = sysRegRead(TX_DTX_IDX0);
-+ tx_desc = ei_local->tx_ring0;
-+ skb_free_idx = ei_local->free_idx;
-+ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) {
-+ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){
-+ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]);
-+ ei_local->skb_free[skb_free_idx]=0;
-+ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC;
-+ }
-+
-+ netif_wake_queue(dev);
-+ tx_ring_full=0;
-+ ei_local->free_idx = skb_free_idx;
-+ }
-+
-+ reg_int_mask=sysRegRead(FE_INT_ENABLE);
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT);
-+}
-+
-+EXPORT_SYMBOL(ei_start_xmit);
-+EXPORT_SYMBOL(ei_xmit_housekeeping);
-+EXPORT_SYMBOL(fe_dma_init);
-+EXPORT_SYMBOL(rt2880_eth_send);
---- /dev/null
-+++ b/drivers/net/ethernet/raeth/raether_qdma.c
-@@ -0,0 +1,805 @@
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_vlan.h>
-+#include <linux/if_ether.h>
-+#include <linux/fs.h>
-+#include <asm/uaccess.h>
-+#include <asm/rt2880/surfboardint.h>
-+#if defined (CONFIG_RAETH_TSO)
-+#include <linux/tcp.h>
-+#include <net/ipv6.h>
-+#include <linux/ip.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/in.h>
-+#include <linux/ppp_defs.h>
-+#include <linux/if_pppox.h>
-+#endif
-+#include <linux/delay.h>
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35)
-+#include <linux/sched.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-+#include <asm/rt2880/rt_mmap.h>
-+#else
-+#include <linux/libata-compat.h>
-+#endif
-+
-+#include "ra2882ethreg.h"
-+#include "raether.h"
-+#include "ra_mac.h"
-+#include "ra_ioctl.h"
-+#include "ra_rfrw.h"
-+#ifdef CONFIG_RAETH_NETLINK
-+#include "ra_netlink.h"
-+#endif
-+#if defined (CONFIG_RAETH_QOS)
-+#include "ra_qos.h"
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+#include "../../../net/nat/hw_nat/ra_nat.h"
-+#endif
-+
-+#if defined (TASKLET_WORKQUEUE_SW)
-+int init_schedule;
-+int working_schedule;
-+#endif
-+
-+
-+#if !defined(CONFIG_RA_NAT_NONE)
-+/* bruce+
-+ */
-+extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb);
-+extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no);
-+#endif
-+
-+#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE)
-+/* Qwert+
-+ */
-+#include <asm/mipsregs.h>
-+extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle);
-+extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle);
-+#endif /* CONFIG_RA_CLASSIFIER */
-+
-+#if defined (CONFIG_RALINK_RT3052_MP2)
-+int32_t mcast_rx(struct sk_buff * skb);
-+int32_t mcast_tx(struct sk_buff * skb);
-+#endif
-+
-+#ifdef RA_MTD_RW_BY_NUM
-+int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf);
-+#else
-+int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf);
-+#endif
-+
-+/* gmac driver feature set config */
-+#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS)
-+#undef DELAY_INT
-+#else
-+#define DELAY_INT 1
-+#endif
-+
-+//#define CONFIG_UNH_TEST
-+/* end of config */
-+
-+#if defined (CONFIG_RAETH_JUMBOFRAME)
-+#define MAX_RX_LENGTH 4096
-+#else
-+#define MAX_RX_LENGTH 1536
-+#endif
-+
-+extern struct net_device *dev_raether;
-+
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+static int rx_dma_owner_idx1;
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+static int rx_calc_idx1;
-+#endif
-+#endif
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+static int rx_calc_idx0;
-+static unsigned long tx_cpu_owner_idx0=0;
-+#endif
-+static unsigned long tx_ring_full=0;
-+
-+#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER)
-+#include "ra_ethtool.h"
-+extern struct ethtool_ops ra_ethtool_ops;
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+extern struct ethtool_ops ra_virt_ethtool_ops;
-+#endif // CONFIG_PSEUDO_SUPPORT //
-+#endif // (CONFIG_ETHTOOL //
-+
-+#ifdef CONFIG_RALINK_VISTA_BASIC
-+int is_switch_175c = 1;
-+#endif
-+
-+//skb->mark to queue mapping table
-+extern unsigned int M2Q_table[64];
-+
-+
-+#define KSEG1 0xa0000000
-+#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1))
-+#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1)
-+
-+extern void set_fe_dma_glo_cfg(void);
-+
-+
-+/**
-+ *
-+ * @brief: get the TXD index from its address
-+ *
-+ * @param: cpu_ptr
-+ *
-+ * @return: TXD index
-+*/
-+
-+static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ int ctx_offset;
-+ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc);
-+ ctx_offset = (*cpu_ptr - ei_local->txd_pool);
-+
-+ return ctx_offset;
-+}
-+
-+
-+
-+/**
-+ * @brief get free TXD from TXD queue
-+ *
-+ * @param free_txd
-+ *
-+ * @return
-+ */
-+static int get_free_txd(struct QDMA_txdesc **free_txd)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned int tmp_idx;
-+
-+ if(ei_local->free_txd_num > 0){
-+ tmp_idx = ei_local->free_txd_head;
-+ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx];
-+ ei_local->free_txd_num -= 1;
-+ *free_txd = &ei_local->txd_pool[tmp_idx];
-+ return tmp_idx;
-+ }else
-+ return NUM_TX_DESC;
-+}
-+
-+
-+/**
-+ * @brief add free TXD into TXD queue
-+ *
-+ * @param free_txd
-+ *
-+ * @return
-+ */
-+int put_free_txd(int free_txd_idx)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx;
-+ ei_local->free_txd_tail = free_txd_idx;
-+ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC;
-+ ei_local->free_txd_num += 1;
-+ return 1;
-+}
-+
-+/*define qdma initial alloc*/
-+/**
-+ * @brief
-+ *
-+ * @param net_dev
-+ *
-+ * @return 0: fail
-+ * 1: success
-+ */
-+bool qdma_tx_desc_alloc(void)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ struct QDMA_txdesc *free_txd = NULL;
-+ unsigned int txd_idx;
-+ int i = 0;
-+
-+
-+ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool);
-+ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool);
-+
-+ if (ei_local->txd_pool == NULL) {
-+ printk("adapter->txd_pool allocation failed!\n");
-+ return 0;
-+ }
-+ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free);
-+ //set all txd_pool_info to 0.
-+ for ( i = 0; i < NUM_TX_DESC; i++)
-+ {
-+ ei_local->skb_free[i]= 0;
-+ ei_local->txd_pool_info[i] = i + 1;
-+ ei_local->txd_pool[i].txd_info3.LS_bit = 1;
-+ ei_local->txd_pool[i].txd_info3.OWN_bit = 1;
-+ }
-+
-+ ei_local->free_txd_head = 0;
-+ ei_local->free_txd_tail = NUM_TX_DESC - 1;
-+ ei_local->free_txd_num = NUM_TX_DESC;
-+
-+
-+ //get free txd from txd pool
-+ txd_idx = get_free_txd(&free_txd);
-+ if( txd_idx == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+
-+ //add null TXD for transmit
-+ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr);
-+
-+ //get free txd from txd pool
-+
-+ txd_idx = get_free_txd(&free_txd);
-+ if( txd_idx == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+ // add null TXD for release
-+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd));
-+ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd));
-+
-+ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr);
-+
-+ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n");
-+ printk("----------------+---------+--------\n");
-+#if 1
-+ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool,
-+ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr);
-+#endif
-+ return 1;
-+}
-+
-+bool fq_qdma_init(void)
-+{
-+ struct QDMA_txdesc *free_head = NULL;
-+ unsigned int free_head_phy;
-+ unsigned int free_tail_phy;
-+ unsigned int *free_page_head = NULL;
-+ unsigned int free_page_head_phy;
-+ int i;
-+
-+ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy);
-+ if (unlikely(free_head == NULL)){
-+ printk(KERN_ERR "QDMA FQ decriptor not available...\n");
-+ return 0;
-+ }
-+ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE);
-+
-+ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy);
-+ if (unlikely(free_page_head == NULL)){
-+ printk(KERN_ERR "QDMA FQ pager not available...\n");
-+ return 0;
-+ }
-+ for (i=0; i < NUM_QDMA_PAGE; i++) {
-+ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE));
-+ if(i < (NUM_QDMA_PAGE-1)){
-+ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc)));
-+
-+
-+#if 0
-+ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) );
-+ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] );
-+ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP );
-+ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP );
-+#endif
-+ }
-+ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE;
-+
-+ }
-+ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc)));
-+
-+ printk("free_head_phy is 0x%x!!!\n", free_head_phy);
-+ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy);
-+ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy);
-+ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy);
-+ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE));
-+ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16);
-+ return 1;
-+}
-+
-+int fe_dma_init(struct net_device *dev)
-+{
-+
-+ int i;
-+ unsigned int regVal;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ fq_qdma_init();
-+
-+ while(1)
-+ {
-+ regVal = sysRegRead(QDMA_GLO_CFG);
-+ if((regVal & RX_DMA_BUSY))
-+ {
-+ printk("\n RX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ if((regVal & TX_DMA_BUSY))
-+ {
-+ printk("\n TX_DMA_BUSY !!! ");
-+ continue;
-+ }
-+ break;
-+ }
-+ /*tx desc alloc, add a NULL TXD to HW*/
-+
-+ qdma_tx_desc_alloc();
-+
-+
-+ /* Initial RX Ring 0*/
-+#ifdef CONFIG_32B_DESC
-+ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
-+ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0);
-+#else
-+ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0);
-+#endif
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0;
-+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+#else
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 1;
-+#endif
-+ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0);
-+
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ /* Initial RX Ring 1*/
-+#ifdef CONFIG_32B_DESC
-+ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL);
-+ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1);
-+#else
-+ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1);
-+#endif
-+ for (i = 0; i < NUM_RX_DESC; i++) {
-+ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc));
-+ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0;
-+#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA)
-+ ei_local->rx_ring0[i].rxd_info2.LS0 = 0;
-+ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH;
-+#else
-+ ei_local->rx_ring1[i].rxd_info2.LS0 = 1;
-+#endif
-+ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE);
-+ }
-+ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1);
-+#endif
-+
-+ regVal = sysRegRead(QDMA_GLO_CFG);
-+ regVal &= 0x000000FF;
-+ sysRegWrite(QDMA_GLO_CFG, regVal);
-+ regVal=sysRegRead(QDMA_GLO_CFG);
-+
-+ /* Tell the adapter where the TX/RX rings are located. */
-+
-+ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0));
-+ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0);
-+#endif
-+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0);
-+#if defined (CONFIG_RAETH_MULTIPLE_RX_RING)
-+ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1));
-+ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC));
-+ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1)));
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1);
-+#endif
-+ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1);
-+#endif
-+
-+ set_fe_dma_glo_cfg();
-+
-+ return 1;
-+}
-+
-+inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no)
-+{
-+ unsigned int length=skb->len;
-+ END_DEVICE* ei_local = netdev_priv(dev);
-+
-+ struct QDMA_txdesc *cpu_ptr;
-+
-+ struct QDMA_txdesc *dma_ptr __maybe_unused;
-+ struct QDMA_txdesc *free_txd;
-+ int ctx_offset;
-+#if defined (CONFIG_RAETH_TSO)
-+ struct iphdr *iph = NULL;
-+ struct QDMA_txdesc *init_cpu_ptr;
-+ struct tcphdr *th = NULL;
-+ struct skb_frag_struct *frag;
-+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-+ int i=0;
-+ int init_txd_idx;
-+#endif // CONFIG_RAETH_TSO //
-+
-+#if defined (CONFIG_RAETH_TSOV6)
-+ struct ipv6hdr *ip6h = NULL;
-+#endif
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ PSEUDO_ADAPTER *pAd;
-+#endif
-+ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr);
-+ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr);
-+ ctx_offset = GET_TXD_OFFSET(&cpu_ptr);
-+ ei_local->skb_free[ctx_offset] = skb;
-+#if defined (CONFIG_RAETH_TSO)
-+ init_cpu_ptr = cpu_ptr;
-+ init_txd_idx = ctx_offset;
-+#endif
-+
-+#if !defined (CONFIG_RAETH_TSO)
-+
-+ //2. prepare data
-+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
-+ cpu_ptr->txd_info3.SDL = skb->len;
-+
-+ if (gmac_no == 1) {
-+ cpu_ptr->txd_info4.FPORT = 1;
-+ }else {
-+ cpu_ptr->txd_info4.FPORT = 2;
-+ }
-+
-+
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+#if 0
-+ iph = (struct iphdr *)skb_network_header(skb);
-+ if (iph->tos == 0xe0)
-+ cpu_ptr->txd_info3.QID = 3;
-+ else if (iph->tos == 0xa0)
-+ cpu_ptr->txd_info3.QID = 2;
-+ else if (iph->tos == 0x20)
-+ cpu_ptr->txd_info3.QID = 1;
-+ else
-+ cpu_ptr->txd_info3.QID = 0;
-+#endif
-+
-+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+ if (skb->ip_summed == CHECKSUM_PARTIAL){
-+ cpu_ptr->txd_info4.TUI_CO = 7;
-+ }else {
-+ cpu_ptr->txd_info4.TUI_CO = 0;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RAETH_HW_VLAN_TX
-+ if(vlan_tx_tag_present(skb)) {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
-+ }else {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0;
-+ }
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
-+ if(ra_sw_nat_hook_rx!= NULL){
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ FOE_MAGIC_TAG(skb) = 0;
-+ }
-+ }
-+#endif
-+#if 0
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ cpu_ptr->txd_info4.UDF = 0x2F;
-+#endif
-+
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+
-+ //3. get NULL TXD and decrease free_tx_num by 1.
-+ ctx_offset = get_free_txd(&free_txd);
-+ if(ctx_offset == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least.
-+ return 0;
-+ }
-+
-+ //4. hook new TXD in the end of queue
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+
-+
-+ //5. move CPU_PTR to new TXD
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ cpu_ptr->txd_info3.OWN_bit = 0;
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+
-+#if 0
-+ printk("----------------------------------------------\n");
-+ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1);
-+ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2);
-+ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3);
-+ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4);
-+#endif
-+
-+#else //#if !defined (CONFIG_RAETH_TSO)
-+ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data);
-+ cpu_ptr->txd_info3.SDL = (length - skb->data_len);
-+ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1;
-+ if (gmac_no == 1) {
-+ cpu_ptr->txd_info4.FPORT = 1;
-+ }else {
-+ cpu_ptr->txd_info4.FPORT = 2;
-+ }
-+
-+ cpu_ptr->txd_info4.TSO = 0;
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628)
-+ if (skb->ip_summed == CHECKSUM_PARTIAL){
-+ cpu_ptr->txd_info4.TUI_CO = 7;
-+ }else {
-+ cpu_ptr->txd_info4.TUI_CO = 0;
-+ }
-+#endif
-+
-+#ifdef CONFIG_RAETH_HW_VLAN_TX
-+ if(vlan_tx_tag_present(skb)) {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb);
-+ }else {
-+ cpu_ptr->txd_info4.VLAN_TAG = 0;
-+ }
-+#endif
-+
-+#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE)
-+ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) {
-+ if(ra_sw_nat_hook_rx!= NULL){
-+ cpu_ptr->txd_info4.FPORT = 4; /* PPE */
-+ FOE_MAGIC_TAG(skb) = 0;
-+ }
-+ }
-+#endif
-+
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+
-+ ctx_offset = get_free_txd(&free_txd);
-+ if(ctx_offset == NUM_TX_DESC) {
-+ printk("get_free_txd fail\n");
-+ return 0;
-+ }
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+
-+ if(nr_frags > 0) {
-+ for(i=0;i<nr_frags;i++) {
-+ frag = &skb_shinfo(skb)->frags[i];
-+ cpu_ptr = free_txd;
-+ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark];
-+ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE);
-+ cpu_ptr->txd_info3.SDL = frag->size;
-+ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0;
-+ cpu_ptr->txd_info3.OWN_bit = 0;
-+ cpu_ptr->txd_info3.SWC_bit = 1;
-+ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID
-+
-+ ctx_offset = get_free_txd(&free_txd);
-+ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd);
-+ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd);
-+ }
-+ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID
-+ }
-+
-+ if(skb_shinfo(skb)->gso_segs > 1) {
-+
-+// TsoLenUpdate(skb->len);
-+
-+ /* TCP over IPv4 */
-+ iph = (struct iphdr *)skb_network_header(skb);
-+#if defined (CONFIG_RAETH_TSOV6)
-+ /* TCP over IPv6 */
-+ ip6h = (struct ipv6hdr *)skb_network_header(skb);
-+#endif
-+ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ }
-+
-+#if defined (CONFIG_RAETH_TSOV6)
-+ /* TCP over IPv6 */
-+ //ip6h = (struct ipv6hdr *)skb_network_header(skb);
-+ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) {
-+ th = (struct tcphdr *)skb_transport_header(skb);
-+#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+#else
-+ init_cpu_ptr->txd_info4.TSO = 1;
-+#endif
-+ th->check = htons(skb_shinfo(skb)->gso_size);
-+ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE);
-+ }
-+#endif
-+ }
-+
-+
-+// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+ init_cpu_ptr->txd_info3.OWN_bit = 0;
-+#endif // CONFIG_RAETH_TSO //
-+
-+ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr);
-+
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ if (gmac_no == 2) {
-+ if (ei_local->PseudoDev != NULL) {
-+ pAd = netdev_priv(ei_local->PseudoDev);
-+ pAd->stat.tx_packets++;
-+ pAd->stat.tx_bytes += length;
-+ }
-+ } else
-+
-+#endif
-+ {
-+ ei_local->stat.tx_packets++;
-+ ei_local->stat.tx_bytes += skb->len;
-+ }
-+ return length;
-+}
-+
-+int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no)
-+{
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+ unsigned long flags;
-+ unsigned int num_of_txd;
-+#if defined (CONFIG_RAETH_TSO)
-+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
-+#endif
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ PSEUDO_ADAPTER *pAd;
-+#endif
-+
-+#if !defined(CONFIG_RA_NAT_NONE)
-+ if(ra_sw_nat_hook_tx!= NULL)
-+ {
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ }else{
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+ }
-+#endif
-+
-+
-+
-+ dev->trans_start = jiffies; /* save the timestamp */
-+ spin_lock_irqsave(&ei_local->page_lock, flags);
-+ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+
-+
-+//check free_txd_num before calling rt288_eth_send()
-+
-+#if defined (CONFIG_RAETH_TSO)
-+ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1);
-+#else
-+ num_of_txd = 1;
-+#endif
-+
-+#if defined(CONFIG_RALINK_MT7621)
-+ if(sysRegRead(0xbe00000c)==0x00030101) {
-+ ei_xmit_housekeeping(0);
-+ }
-+#endif
-+
-+
-+ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC))
-+ {
-+ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA
-+ if (ei_local->free_txd_num < 3)
-+ {
-+#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL)
-+ netif_stop_queue(dev);
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ netif_stop_queue(ei_local->PseudoDev);
-+#endif
-+ tx_ring_full = 1;
-+#endif
-+ }
-+ } else {
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ if (gmac_no == 2)
-+ {
-+ if (ei_local->PseudoDev != NULL)
-+ {
-+ pAd = netdev_priv(ei_local->PseudoDev);
-+ pAd->stat.tx_dropped++;
-+ }
-+ } else
-+#endif
-+ ei_local->stat.tx_dropped++;
-+ kfree_skb(skb);
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+ }
-+ spin_unlock_irqrestore(&ei_local->page_lock, flags);
-+ return 0;
-+}
-+
-+void ei_xmit_housekeeping(unsigned long unused)
-+{
-+ struct net_device *dev = dev_raether;
-+ END_DEVICE *ei_local = netdev_priv(dev);
-+#ifndef CONFIG_RAETH_NAPI
-+ unsigned long reg_int_mask=0;
-+#endif
-+ struct QDMA_txdesc *dma_ptr = NULL;
-+ struct QDMA_txdesc *cpu_ptr = NULL;
-+ struct QDMA_txdesc *tmp_ptr = NULL;
-+ unsigned int htx_offset = 0;
-+
-+ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR));
-+ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR));
-+ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
-+ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) {
-+
-+ //1. keep cpu next TXD
-+ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP);
-+ htx_offset = GET_TXD_OFFSET(&tmp_ptr);
-+ //2. free skb meomry
-+#if defined (CONFIG_RAETH_TSO)
-+ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) {
-+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
-+ }
-+#else
-+ dev_kfree_skb_any(ei_local->skb_free[htx_offset]);
-+#endif
-+
-+ //3. release TXD
-+ htx_offset = GET_TXD_OFFSET(&cpu_ptr);
-+ put_free_txd(htx_offset);
-+
-+ netif_wake_queue(dev);
-+#ifdef CONFIG_PSEUDO_SUPPORT
-+ netif_wake_queue(ei_local->PseudoDev);
-+#endif
-+ tx_ring_full=0;
-+
-+ //4. update cpu_ptr to next ptr
-+ cpu_ptr = tmp_ptr;
-+ }
-+ }
-+ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr));
-+#ifndef CONFIG_RAETH_NAPI
-+ reg_int_mask=sysRegRead(QFE_INT_ENABLE);
-+#if defined (DELAY_INT)
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT);
-+#else
-+
-+ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT);
-+#endif
-+#endif //CONFIG_RAETH_NAPI//
-+}
-+
-+EXPORT_SYMBOL(ei_start_xmit);
-+EXPORT_SYMBOL(ei_xmit_housekeeping);
-+EXPORT_SYMBOL(fe_dma_init);
-+EXPORT_SYMBOL(rt2880_eth_send);
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
- source "drivers/net/ethernet/pasemi/Kconfig"
- source "drivers/net/ethernet/qlogic/Kconfig"
- source "drivers/net/ethernet/ralink/Kconfig"
-+source "drivers/net/ethernet/raeth/Kconfig"
- source "drivers/net/ethernet/realtek/Kconfig"
- source "drivers/net/ethernet/renesas/Kconfig"
- source "drivers/net/ethernet/rdc/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
- obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
- obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
- obj-$(CONFIG_NET_RALINK) += ralink/
-+obj-$(CONFIG_RAETH) += raeth/
- obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
- obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/board-custom.h
-@@ -0,0 +1,153 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
-+#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H
-+
-+#include <linux/autoconf.h>
-+
-+/*=======================================================================*/
-+/* MT6575 SD */
-+/*=======================================================================*/
-+#ifdef MTK_EMMC_SUPPORT
-+#define CFG_DEV_MSDC0
-+#endif
-+#define CFG_DEV_MSDC1
-+#define CFG_DEV_MSDC2
-+#define CFG_DEV_MSDC3
-+#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE)
-+/*
-+SDIO slot index number used by connectivity combo chip:
-+0: invalid (used by memory card)
-+1: MSDC1
-+2: MSDC2
-+*/
-+#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */
-+#else
-+#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT
-+#endif
-+
-+#if 0 /* FIXME. */
-+/*=======================================================================*/
-+/* MT6575 UART */
-+/*=======================================================================*/
-+#define CFG_DEV_UART1
-+#define CFG_DEV_UART2
-+#define CFG_DEV_UART3
-+#define CFG_DEV_UART4
-+
-+#define CFG_UART_PORTS (4)
-+
-+/*=======================================================================*/
-+/* MT6575 I2C */
-+/*=======================================================================*/
-+#define CFG_DEV_I2C
-+//#define CFG_I2C_HIGH_SPEED_MODE
-+//#define CFG_I2C_DMA_MODE
-+
-+/*=======================================================================*/
-+/* MT6575 ADB */
-+/*=======================================================================*/
-+#define ADB_SERIAL "E1K"
-+
-+#endif
-+
-+/*=======================================================================*/
-+/* MT6575 NAND FLASH */
-+/*=======================================================================*/
-+#if 0
-+#define RAMDOM_READ 1<<0
-+#define CACHE_READ 1<<1
-+/*******************************************************************************
-+ * NFI & ECC Configuration
-+ *******************************************************************************/
-+typedef struct
-+{
-+ u16 id; //deviceid+menuid
-+ u8 addr_cycle;
-+ u8 iowidth;
-+ u16 totalsize;
-+ u16 blocksize;
-+ u16 pagesize;
-+ u32 timmingsetting;
-+ char devciename[14];
-+ u32 advancedmode; //
-+}flashdev_info,*pflashdev_info;
-+
-+static const flashdev_info g_FlashTable[]={
-+ //micro
-+ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0},
-+ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0},
-+ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0},
-+ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0},
-+ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0},
-+ //samsung
-+ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0},
-+ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0},
-+ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ},
-+ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ},
-+ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0},
-+ //hynix
-+ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0},
-+ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0},
-+ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0},
-+ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0},
-+ //toshiba
-+ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0},
-+ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0},
-+ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0},
-+ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0},
-+ //st-micro
-+ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0},
-+
-+ // elpida
-+ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0},
-+ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0}
-+};
-+#endif
-+
-+
-+#define NFI_DEFAULT_ACCESS_TIMING (0x44333)
-+
-+//uboot only support 1 cs
-+#define NFI_CS_NUM (2)
-+#define NFI_DEFAULT_CS (0)
-+
-+#define USE_AHB_MODE (1)
-+
-+#define PLATFORM_EVB (1)
-+
-+#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */
-+
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/eureka_ep430.h
-@@ -0,0 +1,204 @@
-+/**************************************************************************
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef _EUREKA_EP430_H
-+#define _EUREKA_EP430_H
-+
-+
-+#include <asm/addrspace.h> /* for KSEG1ADDR() */
-+#include <asm/byteorder.h> /* for cpu_to_le32() */
-+#include <asm/mach-ralink/rt_mmap.h>
-+
-+
-+/*
-+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
-+ * bytes when running bigendian.
-+ */
-+
-+#define MV_WRITE(ofs, data) \
-+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-+#define MV_READ(ofs, data) \
-+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+#define MV_READ_DATA(ofs) \
-+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_16(ofs, data) \
-+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-+#define MV_READ_16(ofs, data) \
-+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_8(ofs, data) \
-+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-+#define MV_READ_8(ofs, data) \
-+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-+
-+#define MV_SET_REG_BITS(ofs,bits) \
-+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits))
-+#define MV_RESET_REG_BITS(ofs,bits) \
-+ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits))
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+
-+#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883)
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010)
-+#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030)
-+#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034)
-+#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050)
-+
-+#elif defined(CONFIG_RALINK_RT3883)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCI
-+PCI1 --> PCIe
-+*/
-+#define RT3883_PCI_OFFSET 0x1000
-+#define RT3883_PCIE_OFFSET 0x2000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050)
-+
-+#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCIe 0
-+PCI1 --> PCIe 1
-+*/
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004)
-+#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C)
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080)
-+
-+/*
-+PCI0 --> PCIe 0
-+PCI1 --> PCIe 1
-+PCI2 --> PCIe 2
-+*/
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+#define RT6855_PCIE2_OFFSET 0x4000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-+
-+#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350)
-+#else
-+#error "undefined in PCI"
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/generic.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Defines of the Palmchip boards specific address-MAP, registers, etc.
-+ */
-+#ifndef __ASM_SURFBOARD_GENERIC_H
-+#define __ASM_SURFBOARD_GENERIC_H
-+
-+#include <asm/addrspace.h>
-+#include <asm/byteorder.h>
-+#include <asm/mach-ralink/rt_mmap.h>
-+
-+/*
-+ * Reset register.
-+ */
-+#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34))
-+#define GORESET (0x1)
-+
-+/*
-+ * Power-off register
-+ */
-+#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24))
-+#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */
-+#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28))
-+#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20))
-+#define POWEROFF (0x0) /* drive low */
-+
-+
-+#endif /* __ASM_SURFBOARD_GENERIC_H */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/lm.h
-@@ -0,0 +1,32 @@
-+#include <linux/version.h>
-+
-+struct lm_device {
-+ struct device dev;
-+ struct resource resource;
-+ unsigned int irq;
-+ unsigned int id;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ void *lm_drvdata;
-+#endif
-+};
-+
-+struct lm_driver {
-+ struct device_driver drv;
-+ int (*probe)(struct lm_device *);
-+ void (*remove)(struct lm_device *);
-+ int (*suspend)(struct lm_device *, u32);
-+ int (*resume)(struct lm_device *);
-+};
-+
-+int lm_driver_register(struct lm_driver *drv);
-+void lm_driver_unregister(struct lm_driver *drv);
-+
-+int lm_device_register(struct lm_device *dev);
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# define lm_get_drvdata(lm) ((lm)->lm_drvdata)
-+# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0)
-+#else
-+# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
-+# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/prom.h
-@@ -0,0 +1,50 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * MIPS boards bootprom interface for the Linux kernel.
-+ *
-+ */
-+
-+#ifndef _MIPS_PROM_H
-+#define _MIPS_PROM_H
-+
-+extern char *prom_getcmdline(void);
-+extern char *prom_getenv(char *name);
-+extern void setup_prom_printf(int tty_no);
-+extern void prom_setup_printf(int tty_no);
-+extern void prom_printf(char *fmt, ...);
-+extern void prom_init_cmdline(void);
-+extern void prom_meminit(void);
-+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-+extern void prom_free_prom_memory (void);
-+extern void mips_display_message(const char *str);
-+extern void mips_display_word(unsigned int num);
-+extern int get_ethernet_addr(char *ethernet_addr);
-+
-+/* Memory descriptor management. */
-+#define PROM_MAX_PMEMBLOCKS 32
-+struct prom_pmemblock {
-+ unsigned long base; /* Within KSEG0. */
-+ unsigned int size; /* In bytes. */
-+ unsigned int type; /* free or prom memory */
-+};
-+
-+#endif /* !(_MIPS_PROM_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/rt_mmap.h
-@@ -0,0 +1,796 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * register definition for Ralink RT-series SoC
-+ *
-+ * Copyright 2007 Ralink Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#ifndef __RALINK_MMAP__
-+#define __RALINK_MMAP__
-+
-+#if defined (CONFIG_RALINK_RT2880_SHUTTLE)
-+
-+#define RALINK_SYSCTL_BASE 0xA0300000
-+#define RALINK_TIMER_BASE 0xA0300100
-+#define RALINK_INTCL_BASE 0xA0300200
-+#define RALINK_MEMCTRL_BASE 0xA0300300
-+#define RALINK_UART_BASE 0xA0300500
-+#define RALINK_PIO_BASE 0xA0300600
-+#define RALINK_I2C_BASE 0xA0300900
-+#define RALINK_SPI_BASE 0xA0300B00
-+#define RALINK_UART_LITE_BASE 0xA0300C00
-+#define RALINK_FRAME_ENGINE_BASE 0xA0310000
-+#define RALINK_EMBEDD_ROM_BASE 0xA0400000
-+#define RALINK_PCI_BASE 0xA0500000
-+#define RALINK_11N_MAC_BASE 0xA0600000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_TIMER0 (1<<0)
-+#define RALINK_INTCTL_WDTIMER (1<<1)
-+#define RALINK_INTCTL_UART (1<<2)
-+#define RALINK_INTCTL_PIO (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UARTLITE (1<<8)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
-+
-+//Reset Control Register
-+#define RALINK_TIMER_RST (1<<1)
-+#define RALINK_INTC_RST (1<<2)
-+#define RALINK_MC_RST (1<<3)
-+#define RALINK_CPU_RST (1<<4)
-+#define RALINK_UART_RST (1<<5)
-+#define RALINK_PIO_RST (1<<6)
-+#define RALINK_I2C_RST (1<<9)
-+#define RALINK_SPI_RST (1<<11)
-+#define RALINK_UART2_RST (1<<12)
-+#define RALINK_PCI_RST (1<<16)
-+#define RALINK_2860_RST (1<<17)
-+#define RALINK_FE_RST (1<<18)
-+#define RALINK_PCM_RST (1<<19)
-+
-+
-+#elif defined (CONFIG_RALINK_RT2880_MP)
-+
-+#define RALINK_SYSCTL_BASE 0xA0300000
-+#define RALINK_TIMER_BASE 0xA0300100
-+#define RALINK_INTCL_BASE 0xA0300200
-+#define RALINK_MEMCTRL_BASE 0xA0300300
-+#define RALINK_UART_BASE 0xA0300500
-+#define RALINK_PIO_BASE 0xA0300600
-+#define RALINK_I2C_BASE 0xA0300900
-+#define RALINK_SPI_BASE 0xA0300B00
-+#define RALINK_UART_LITE_BASE 0x00300C00
-+#define RALINK_FRAME_ENGINE_BASE 0xA0400000
-+#define RALINK_EMBEDD_ROM_BASE 0xA0410000
-+#define RALINK_PCI_BASE 0xA0440000
-+#define RALINK_11N_MAC_BASE 0xA0480000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_TIMER0 (1<<0)
-+#define RALINK_INTCTL_WDTIMER (1<<1)
-+#define RALINK_INTCTL_UART (1<<2)
-+#define RALINK_INTCTL_PIO (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UARTLITE (1<<8)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<23)
-+
-+//Reset Control Register
-+#define RALINK_TIMER_RST (1<<1)
-+#define RALINK_INTC_RST (1<<2)
-+#define RALINK_MC_RST (1<<3)
-+#define RALINK_CPU_RST (1<<4)
-+#define RALINK_UART_RST (1<<5)
-+#define RALINK_PIO_RST (1<<6)
-+#define RALINK_I2C_RST (1<<9)
-+#define RALINK_SPI_RST (1<<11)
-+#define RALINK_UART2_RST (1<<12)
-+#define RALINK_PCI_RST (1<<16)
-+#define RALINK_2860_RST (1<<17)
-+#define RALINK_FE_RST (1<<18)
-+#define RALINK_PCM_RST (1<<19)
-+
-+#elif defined (CONFIG_RALINK_RT3052)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_PCM_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_GDMA_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_OTG_BASE 0x101C0000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_OTG_IRQN 18
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_CPU_RST (1<<1)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_RT2872_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_OTG_RST (1<<22)
-+#define RALINK_SW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+
-+#elif defined (CONFIG_RALINK_RT3352)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+
-+
-+//Clock Conf Register
-+#define RALINK_UPHY1_CLK_EN (1<<20)
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+
-+#elif defined (CONFIG_RALINK_RT5350)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_USB_HOST (1<<18)
-+#define RALINK_INTCTL_USB_DEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_MIPSC_RST (1<<28)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+#elif defined (CONFIG_RALINK_RT2883)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_PCM_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_GDMA_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_OTG_BASE 0x101C0000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_OTG_IRQN 18
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_CPU_RST (1<<1)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_OTG_RST (1<<22)
-+#define RALINK_PCIE_RST (1<<23)
-+
-+#elif defined (CONFIG_RALINK_RT3883)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NOR_CTRL_BASE 0xB0000700
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_CODEC1_BASE 0xB0003000
-+#define RALINK_CODEC2_BASE 0xB0003800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+#define RALINK_PCIE_BASE 0xB0200000
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_NAND (1<<8)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_NAND_RST (1<<15)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_WLAN_RST (1<<20)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_FLASH_RST (1<<26)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY1_CLK_EN (1<<20)
-+#define RALINK_UPHY0_CLK_EN (1<<18)
-+#define RALINK_GE1_CLK_EN (1<<16)
-+
-+#elif defined (CONFIG_RALINK_RT6855)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_NAND_CTRL_BASE 0xB0000800
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_OTG (1<<18)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+
-+#elif defined (CONFIG_RALINK_MT7620)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
-+#define RALINK_UART_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE_BASE 0x10000C00
-+#define RALINK_MIPS_CNT_BASE 0x10000D00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PPE_BASE 0xB0100C00
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0x10120000
-+#define RALINK_MSDC_BASE 0xB0130000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000D00
-+#define RALINK_COMPARE 0xB0000D04
-+#define RALINK_COUNT 0xB0000D08
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_SPI (1<<11)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_CRYPTO (1<<13)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+#define RALINK_MIPS_CNT_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_UPHY1_CLK_EN (1<<22)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+#define RALINK_TIMER_BASE 0xBE000100
-+#define RALINK_INTCL_BASE 0xBE000200
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400
-+#define RALINK_MIPS_CNT_BASE 0x1E000500
-+#define RALINK_PIO_BASE 0xBE000600
-+#define RALINK_SPDIF_BASE 0xBE000700
-+#define RALINK_I2C_BASE 0xBE000900
-+#define RALINK_I2S_BASE 0xBE000A00
-+#define RALINK_SPI_BASE 0xBE000B00
-+#define RALINK_UART_LITE1_BASE 0x1E000C00
-+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
-+#define RALINK_UART_LITE2_BASE 0x1E000D00
-+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
-+#define RALINK_UART_LITE3_BASE 0x1E000E00
-+#define RALINK_ANA_CTRL_BASE 0xBE000F00
-+#define RALINK_PCM_BASE 0xBE002000
-+#define RALINK_GDMA_BASE 0xBE002800
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000
-+#define RALINK_MEMCTRL_BASE 0xBE005000
-+#define RALINK_EXT_MC_ARB_BASE 0xBE006000
-+#define RALINK_HS_DMA_BASE 0xBE007000
-+#define RALINK_FRAME_ENGINE_BASE 0xBE100000
-+#define RALINK_PPE_BASE 0xBE100C00
-+#define RALINK_ETH_SW_BASE 0xBE110000
-+#define RALINK_ROM_BASE 0xBE118000
-+#define RALINK_MSDC_BASE 0xBE130000
-+#define RALINK_PCI_BASE 0xBE140000
-+#define RALINK_USB_HOST_BASE 0x1E1C0000
-+#define RALINK_11N_MAC_BASE 0xBE180000 //Unused
-+
-+#define RALINK_MCNT_CFG 0xBE000500
-+#define RALINK_COMPARE 0xBE000504
-+#define RALINK_COUNT 0xBE000508
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_FE (1<<3)
-+#define RALINK_INTCTL_PCIE0 (1<<4)
-+#define RALINK_INTCTL_SYSCTL (1<<6)
-+#define RALINK_INTCTL_I2C (1<<8)
-+#define RALINK_INTCTL_DRAMC (1<<9)
-+#define RALINK_INTCTL_PCM (1<<10)
-+#define RALINK_INTCTL_HSDMA (1<<11)
-+#define RALINK_INTCTL_PIO (1<<12)
-+#define RALINK_INTCTL_DMA (1<<13)
-+#define RALINK_INTCTL_NFI (1<<14)
-+#define RALINK_INTCTL_NFIECC (1<<15)
-+#define RALINK_INTCTL_I2S (1<<16)
-+#define RALINK_INTCTL_SPI (1<<17)
-+#define RALINK_INTCTL_SPDIF (1<<18)
-+#define RALINK_INTCTL_CRYPTO (1<<19)
-+#define RALINK_INTCTL_SDXC (1<<20)
-+#define RALINK_INTCTL_PCTRL (1<<21)
-+#define RALINK_INTCTL_USB (1<<22)
-+#define RALINK_INTCTL_SWITCH (1<<23)
-+#define RALINK_INTCTL_PCIE1 (1<<24)
-+#define RALINK_INTCTL_PCIE2 (1<<25)
-+#define RALINK_INTCTL_UART1 (1<<26)
-+#define RALINK_INTCTL_UART2 (1<<27)
-+#define RALINK_INTCTL_UART3 (1<<28)
-+#define RALINK_INTCTL_WDTIMER (1<<29)
-+#define RALINK_INTCTL_TIMER0 (1<<30)
-+#define RALINK_INTCTL_TIMER1 (1<<31)
-+
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_MCM_RST (1<<1)
-+#define RALINK_HSDMA_RST (1<<2)
-+#define RALINK_FE_RST (1<<6)
-+#define RALINK_SPDIF_RST (1<<7)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_NAND_RST (1<<15)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UART1_RST (1<<19)
-+#define RALINK_UART2_RST (1<<20)
-+#define RALINK_UART3_RST (1<<21)
-+#define RALINK_ETH_RST (1<<23)
-+#define RALINK_PCIE0_RST (1<<24)
-+#define RALINK_PCIE1_RST (1<<25)
-+#define RALINK_PCIE2_RST (1<<26)
-+#define RALINK_AUX_STCK_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+#define RALINK_SDXC_RST (1<<30)
-+#define RALINK_PPE_RST (1<<31)
-+
-+//Clock Conf Register
-+#define RALINK_PCIE0_CLK_EN (1<<24)
-+#define RALINK_PCIE1_CLK_EN (1<<25)
-+#define RALINK_PCIE2_CLK_EN (1<<26)
-+//#define RALINK_UPHY0_CLK_EN (1<<27)
-+//#define RALINK_UPHY1_CLK_EN (1<<28)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#define RALINK_TESTSTAT 0xBE000018
-+#define RALINK_TESTSTAT2 0xBE00001C
-+
-+#elif defined (CONFIG_RALINK_MT7628)
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_TIMER_BASE 0xB0000100
-+#define RALINK_INTCL_BASE 0xB0000200
-+#define RALINK_MEMCTRL_BASE 0xB0000300
-+#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400
-+#define RALINK_MIPS_CNT_BASE 0x10000500
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_SPI_SLAVE_BASE 0xB0000700
-+#define RALINK_I2C_BASE 0xB0000900
-+#define RALINK_I2S_BASE 0xB0000A00
-+#define RALINK_SPI_BASE 0xB0000B00
-+#define RALINK_UART_LITE1_BASE 0x10000C00
-+#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE
-+#define RALINK_UART_LITE2_BASE 0x10000D00
-+#define RALINK_UART_BASE RALINK_UART_LITE2_BASE
-+#define RALINK_UART_LITE3_BASE 0x10000E00
-+#define RALINK_PCM_BASE 0xB0002000
-+#define RALINK_GDMA_BASE 0xB0002800
-+#define RALINK_AES_ENGINE_BASE 0xB0004000
-+#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE
-+#define RALINK_FRAME_ENGINE_BASE 0xB0100000
-+#define RALINK_PPE_BASE 0xB0100C00
-+#define RALINK_ETH_SW_BASE 0xB0110000
-+#define RALINK_USB_DEV_BASE 0xB0120000
-+#define RALINK_MSDC_BASE 0xB0130000
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_11N_MAC_BASE 0xB0180000
-+#define RALINK_USB_HOST_BASE 0x101C0000
-+
-+#define RALINK_MCNT_CFG 0xB0000500
-+#define RALINK_COMPARE 0xB0000504
-+#define RALINK_COUNT 0xB0000508
-+
-+
-+//Interrupt Controller
-+#define RALINK_INTCTL_SYSCTL (1<<0)
-+#define RALINK_INTCTL_TIMER0 (1<<1)
-+#define RALINK_INTCTL_WDTIMER (1<<2)
-+#define RALINK_INTCTL_ILL_ACCESS (1<<3)
-+#define RALINK_INTCTL_PCM (1<<4)
-+#define RALINK_INTCTL_UART (1<<5)
-+#define RALINK_INTCTL_PIO (1<<6)
-+#define RALINK_INTCTL_DMA (1<<7)
-+#define RALINK_INTCTL_PC (1<<9)
-+#define RALINK_INTCTL_I2S (1<<10)
-+#define RALINK_INTCTL_SPI (1<<11)
-+#define RALINK_INTCTL_UARTLITE (1<<12)
-+#define RALINK_INTCTL_CRYPTO (1<<13)
-+#define RALINK_INTCTL_ESW (1<<17)
-+#define RALINK_INTCTL_UHST (1<<18)
-+#define RALINK_INTCTL_UDEV (1<<19)
-+#define RALINK_INTCTL_GLOBAL (1<<31)
-+
-+//Reset Control Register
-+#define RALINK_SYS_RST (1<<0)
-+#define RALINK_TIMER_RST (1<<8)
-+#define RALINK_INTC_RST (1<<9)
-+#define RALINK_MC_RST (1<<10)
-+#define RALINK_PCM_RST (1<<11)
-+#define RALINK_UART_RST (1<<12)
-+#define RALINK_PIO_RST (1<<13)
-+#define RALINK_DMA_RST (1<<14)
-+#define RALINK_I2C_RST (1<<16)
-+#define RALINK_I2S_RST (1<<17)
-+#define RALINK_SPI_RST (1<<18)
-+#define RALINK_UARTL_RST (1<<19)
-+#define RALINK_FE_RST (1<<21)
-+#define RALINK_UHST_RST (1<<22)
-+#define RALINK_ESW_RST (1<<23)
-+#define RALINK_EPHY_RST (1<<24)
-+#define RALINK_UDEV_RST (1<<25)
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCIE1_RST (1<<27)
-+#define RALINK_MIPS_CNT_RST (1<<28)
-+#define RALINK_CRYPTO_RST (1<<29)
-+
-+//Clock Conf Register
-+#define RALINK_UPHY0_CLK_EN (1<<25)
-+#define RALINK_UPHY1_CLK_EN (1<<22)
-+#define RALINK_PCIE0_CLK_EN (1<<26)
-+#define RALINK_PCIE1_CLK_EN (1<<27)
-+
-+//CPU PLL CFG Register
-+#define CPLL_SW_CONFIG (0x1UL << 31)
-+#define CPLL_MULT_RATIO_SHIFT 16
-+#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT)
-+#define CPLL_DIV_RATIO_SHIFT 10
-+#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT)
-+#define BASE_CLOCK 40 /* Mhz */
-+
-+#endif
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/serial_rt2880.h
-@@ -0,0 +1,443 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * serial port definition for Ralink RT2880 solution
-+ *
-+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2007 Bruce Chang
-+ *
-+ * Initial Release
-+ *
-+ *
-+ *
-+ **************************************************************************
-+ */
-+
-+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+#define RT2880_UART_RBR_OFFSET 0x00
-+#define RT2880_UART_TBR_OFFSET 0x00
-+#define RT2880_UART_IER_OFFSET 0x04
-+#define RT2880_UART_IIR_OFFSET 0x08
-+#define RT2880_UART_FCR_OFFSET 0x08
-+#define RT2880_UART_LCR_OFFSET 0x0C
-+#define RT2880_UART_MCR_OFFSET 0x10
-+#define RT2880_UART_LSR_OFFSET 0x14
-+#define RT2880_UART_DLL_OFFSET 0x00
-+#define RT2880_UART_DLM_OFFSET 0x04
-+#else
-+#define RT2880_UART_RBR_OFFSET 0x00
-+#define RT2880_UART_TBR_OFFSET 0x04
-+#define RT2880_UART_IER_OFFSET 0x08
-+#define RT2880_UART_IIR_OFFSET 0x0C
-+#define RT2880_UART_FCR_OFFSET 0x10
-+#define RT2880_UART_LCR_OFFSET 0x14
-+#define RT2880_UART_MCR_OFFSET 0x18
-+#define RT2880_UART_LSR_OFFSET 0x1C
-+#define RT2880_UART_DLL_OFFSET 0x2C
-+#define RT2880_UART_DLM_OFFSET 0x30
-+#endif
-+
-+#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET)
-+#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET)
-+#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET)
-+#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET)
-+#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET)
-+#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET)
-+#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET)
-+#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET)
-+#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET)
-+#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET)
-+
-+
-+#if defined (CONFIG_RALINK_RT2880) || \
-+ defined (CONFIG_RALINK_RT2883) || \
-+ defined (CONFIG_RALINK_RT3883) || \
-+ defined (CONFIG_RALINK_RT3352) || \
-+ defined (CONFIG_RALINK_RT5350) || \
-+ defined (CONFIG_RALINK_RT6855) || \
-+ defined (CONFIG_RALINK_MT7620) || \
-+ defined (CONFIG_RALINK_RT3052)
-+
-+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
-+
-+#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */
-+#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
-+ * In: Fifo count
-+ * Out: Fifo custom trigger levels
-+ * XR16C85x only
-+ */
-+
-+#define UART_IER 8 /* Out: Interrupt Enable Register */
-+#define UART_FCTR 8 /* (LCR=BF) Feature Control Register
-+ * XR16C85x only
-+ */
-+
-+#define UART_IIR 12 /* In: Interrupt ID Register */
-+#define UART_EFR 12 /* I/O: Extended Features Register */
-+ /* (DLAB=1, 16C660 only) */
-+
-+#define UART_FCR 16 /* Out: FIFO Control Register */
-+#define UART_LCR 20 /* Out: Line Control Register */
-+#define UART_MCR 24 /* Out: Modem Control Register */
-+#define UART_LSR 28 /* In: Line Status Register */
-+#define UART_MSR 32 /* In: Modem Status Register */
-+#define UART_SCR 36 /* I/O: Scratch Register */
-+#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */
-+/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause
-+ * unpredictable values to be written to the Divisor Latch
-+ */
-+#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */
-+
-+#else
-+
-+#define UART_RX 0 /* In: Receive buffer */
-+#define UART_TX 0 /* Out: Transmit buffer */
-+#define UART_DLL 0 /* Out: Divisor Latch Low */
-+#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
-+ * In: Fifo count
-+ * Out: Fifo custom trigger levels */
-+
-+#define UART_DLM 4 /* Out: Divisor Latch High */
-+#define UART_IER 4 /* Out: Interrupt Enable Register */
-+#define UART_FCTR 4 /* Feature Control Register */
-+
-+#define UART_IIR 8 /* In: Interrupt ID Register */
-+#define UART_FCR 8 /* Out: FIFO Control Register */
-+#define UART_EFR 8 /* I/O: Extended Features Register */
-+
-+#define UART_LCR 12 /* Out: Line Control Register */
-+#define UART_MCR 16 /* Out: Modem Control Register */
-+#define UART_LSR 20 /* In: Line Status Register */
-+#define UART_MSR 24 /* In: Modem Status Register */
-+#define UART_SCR 28 /* I/O: Scratch Register */
-+#define UART_EMSR 28 /* Extended Mode Select Register */
-+
-+#endif
-+/*
-+ * DLAB=0
-+ */
-+//#define UART_IER 1 /* Out: Interrupt Enable Register */
-+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-+/*
-+ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
-+ */
-+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
-+
-+//#define UART_IIR 2 /* In: Interrupt ID Register */
-+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-+
-+//#define UART_FCR 2 /* Out: FIFO Control Register */
-+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-+/*
-+ * Note: The FIFO trigger levels are chip specific:
-+ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
-+ * PC16550D: 1 4 8 14 xx xx xx xx
-+ * TI16C550A: 1 4 8 14 xx xx xx xx
-+ * TI16C550C: 1 4 8 14 xx xx xx xx
-+ * ST16C550: 1 4 8 14 xx xx xx xx
-+ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
-+ * NS16C552: 1 4 8 14 xx xx xx xx
-+ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
-+ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
-+ * TI16C752: 8 16 56 60 8 16 32 56
-+ */
-+#define UART_FCR_R_TRIG_00 0x00
-+#define UART_FCR_R_TRIG_01 0x40
-+#define UART_FCR_R_TRIG_10 0x80
-+#define UART_FCR_R_TRIG_11 0xc0
-+#define UART_FCR_T_TRIG_00 0x00
-+#define UART_FCR_T_TRIG_01 0x10
-+#define UART_FCR_T_TRIG_10 0x20
-+#define UART_FCR_T_TRIG_11 0x30
-+
-+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-+/* 16650 definitions */
-+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
-+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
-+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
-+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
-+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
-+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
-+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
-+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
-+
-+//#define UART_LCR 3 /* Out: Line Control Register */
-+/*
-+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
-+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
-+ */
-+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-+#define UART_LCR_SBC 0x40 /* Set break control */
-+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-+#define UART_LCR_EPAR 0x10 /* Even parity select */
-+#define UART_LCR_PARITY 0x08 /* Parity Enable */
-+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
-+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-+
-+//#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
-+#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
-+#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
-+#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-+#define UART_MCR_OUT2 0x08 /* Out2 complement */
-+#define UART_MCR_OUT1 0x04 /* Out1 complement */
-+#define UART_MCR_RTS 0x02 /* RTS complement */
-+#define UART_MCR_DTR 0x01 /* DTR complement */
-+
-+//#define UART_LSR 5 /* In: Line Status Register */
-+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-+#define UART_LSR_FE 0x08 /* Frame error indicator */
-+#define UART_LSR_PE 0x04 /* Parity error indicator */
-+#define UART_LSR_OE 0x02 /* Overrun error indicator */
-+#define UART_LSR_DR 0x01 /* Receiver data ready */
-+
-+//#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-+#define UART_MSR_RI 0x40 /* Ring Indicator */
-+#define UART_MSR_DSR 0x20 /* Data Set Ready */
-+#define UART_MSR_CTS 0x10 /* Clear to Send */
-+#define UART_MSR_DDCD 0x08 /* Delta DCD */
-+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-+#define UART_MSR_DDSR 0x02 /* Delta DSR */
-+#define UART_MSR_DCTS 0x01 /* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-+
-+//#define UART_SCR 7 /* I/O: Scratch Register */
-+
-+/*
-+ * DLAB=1
-+ */
-+//#define UART_DLL 0 /* Out: Divisor Latch Low */
-+//#define UART_DLM 1 /* Out: Divisor Latch High */
-+
-+/*
-+ * LCR=0xBF (or DLAB=1 for 16C660)
-+ */
-+//#define UART_EFR 2 /* I/O: Extended Features Register */
-+#define UART_EFR_CTS 0x80 /* CTS flow control */
-+#define UART_EFR_RTS 0x40 /* RTS flow control */
-+#define UART_EFR_SCD 0x20 /* Special character detect */
-+#define UART_EFR_ECB 0x10 /* Enhanced control bit */
-+/*
-+ * the low four bits control software flow control
-+ */
-+
-+/*
-+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
-+ */
-+#define UART_XON1 4 /* I/O: Xon character 1 */
-+#define UART_XON2 5 /* I/O: Xon character 2 */
-+#define UART_XOFF1 6 /* I/O: Xoff character 1 */
-+#define UART_XOFF2 7 /* I/O: Xoff character 2 */
-+
-+/*
-+ * EFR[4]=1 MCR[6]=1, TI16C752
-+ */
-+#define UART_TI752_TCR 6 /* I/O: transmission control register */
-+#define UART_TI752_TLR 7 /* I/O: trigger level register */
-+
-+/*
-+ * LCR=0xBF, XR16C85x
-+ */
-+//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
-+// * In: Fifo count
-+// * Out: Fifo custom trigger levels */
-+/*
-+ * These are the definitions for the Programmable Trigger Register
-+ */
-+#define UART_TRG_1 0x01
-+#define UART_TRG_4 0x04
-+#define UART_TRG_8 0x08
-+#define UART_TRG_16 0x10
-+#define UART_TRG_32 0x20
-+#define UART_TRG_64 0x40
-+#define UART_TRG_96 0x60
-+#define UART_TRG_120 0x78
-+#define UART_TRG_128 0x80
-+
-+//#define UART_FCTR 1 /* Feature Control Register */
-+#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
-+#define UART_FCTR_RTS_4DELAY 0x01
-+#define UART_FCTR_RTS_6DELAY 0x02
-+#define UART_FCTR_RTS_8DELAY 0x03
-+#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
-+#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
-+#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
-+#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
-+#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
-+#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
-+#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
-+#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
-+#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
-+
-+/*
-+ * LCR=0xBF, FCTR[6]=1
-+ */
-+//#define UART_EMSR 7 /* Extended Mode Select Register */
-+#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
-+#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
-+
-+/*
-+ * The Intel XScale on-chip UARTs define these bits
-+ */
-+#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
-+#define UART_IER_UUE 0x40 /* UART Unit Enable */
-+#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
-+#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
-+
-+#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
-+
-+#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
-+#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
-+#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
-+#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
-+
-+
-+
-+
-+/*
-+ * These register definitions are for the 16C950
-+ */
-+#define UART_ASR 0x01 /* Additional Status Register */
-+#define UART_RFL 0x03 /* Receiver FIFO level */
-+#define UART_TFL 0x04 /* Transmitter FIFO level */
-+#define UART_ICR 0x05 /* Index Control Register */
-+
-+/* The 16950 ICR registers */
-+#define UART_ACR 0x00 /* Additional Control Register */
-+#define UART_CPR 0x01 /* Clock Prescalar Register */
-+#define UART_TCR 0x02 /* Times Clock Register */
-+#define UART_CKS 0x03 /* Clock Select Register */
-+#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
-+#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
-+#define UART_FCL 0x06 /* Flow Control Level Lower */
-+#define UART_FCH 0x07 /* Flow Control Level Higher */
-+#define UART_ID1 0x08 /* ID #1 */
-+#define UART_ID2 0x09 /* ID #2 */
-+#define UART_ID3 0x0A /* ID #3 */
-+#define UART_REV 0x0B /* Revision */
-+#define UART_CSR 0x0C /* Channel Software Reset */
-+#define UART_NMR 0x0D /* Nine-bit Mode Register */
-+#define UART_CTR 0xFF
-+
-+/*
-+ * The 16C950 Additional Control Reigster
-+ */
-+#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-+#define UART_ACR_TXDIS 0x02 /* Receiver disable */
-+#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
-+#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
-+#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
-+#define UART_ACR_ASREN 0x80 /* Additional status enable */
-+
-+
-+
-+/*
-+ * These definitions are for the RSA-DV II/S card, from
-+ *
-+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
-+ */
-+
-+#define UART_RSA_BASE (-8)
-+
-+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-+
-+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-+
-+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-+
-+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-+
-+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-+
-+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-+
-+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-+
-+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-+
-+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-+
-+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-+
-+/*
-+ * The RSA DSV/II board has two fixed clock frequencies. One is the
-+ * standard rate, and the other is 8 times faster.
-+ */
-+#define SERIAL_RSA_BAUD_BASE (921600)
-+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
-+
-+/*
-+ * Extra serial register definitions for the internal UARTs
-+ * in TI OMAP processors.
-+ */
-+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
-+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
-+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
-+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
-+#define UART_OMAP_EBLR 0x12 /* BOF length register */
-+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
-+#define UART_OMAP_MVER 0x14 /* Module version register */
-+#define UART_OMAP_SYSC 0x15 /* System configuration register */
-+#define UART_OMAP_SYSS 0x16 /* System status register */
-+
-+
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/sizes.h
-@@ -0,0 +1,52 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+/* DO NOT EDIT!! - this file automatically generated
-+ * from .s file by awk -f s2h.awk
-+ */
-+/* Size definitions
-+ * Copyright (C) ARM Limited 1998. All rights reserved.
-+ */
-+
-+#ifndef __sizes_h
-+#define __sizes_h 1
-+
-+/* handy sizes */
-+#define SZ_1K 0x00000400
-+#define SZ_4K 0x00001000
-+#define SZ_8K 0x00002000
-+#define SZ_16K 0x00004000
-+#define SZ_64K 0x00010000
-+#define SZ_128K 0x00020000
-+#define SZ_256K 0x00040000
-+#define SZ_512K 0x00080000
-+
-+#define SZ_1M 0x00100000
-+#define SZ_2M 0x00200000
-+#define SZ_4M 0x00400000
-+#define SZ_8M 0x00800000
-+#define SZ_16M 0x01000000
-+#define SZ_32M 0x02000000
-+#define SZ_64M 0x04000000
-+#define SZ_128M 0x08000000
-+#define SZ_256M 0x10000000
-+#define SZ_512M 0x20000000
-+
-+#define SZ_1G 0x40000000
-+#define SZ_2G 0x80000000
-+
-+#endif
-+
-+/* END */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/surfboard.h
-@@ -0,0 +1,70 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ */
-+#ifndef _SURFBOARD_H
-+#define _SURFBOARD_H
-+
-+#include <asm/addrspace.h>
-+
-+
-+
-+/*
-+ * Surfboard system clock.
-+ * This is the default value and maybe overidden by System Clock passed on the
-+ * command line (sysclk=).
-+ */
-+#define SURFBOARD_SYSTEM_CLOCK (125000000)
-+
-+/*
-+ * Surfboard UART base baud rate = System Clock / 16.
-+ * Ex. (14.7456 MHZ / 16) = 921600
-+ * (32.0000 MHZ / 16) = 2000000
-+ */
-+#define SURFBOARD_BAUD_DIV (16)
-+#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV)
-+
-+/*
-+ * Maximum number of IDE Controllers
-+ * Surfboard only has one ide (ide0), so only 2 drives are
-+ * possible. (no need to check for more hwifs.)
-+ */
-+//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */
-+#define MAX_IDE_HWIFS (2) /* Graphite board */
-+
-+#define GCMP_BASE_ADDR 0x1fbf8000
-+#define GCMP_ADDRSPACE_SZ (256 * 1024)
-+
-+/*
-+ * * GIC Specific definitions
-+ * */
-+#define GIC_BASE_ADDR 0x1fbc0000
-+#define GIC_ADDRSPACE_SZ (128 * 1024)
-+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE)
-+
-+/* GIC's Nomenclature for Core Interrupt Pins */
-+#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
-+#define GIC_CPU_INT1 1 /* . */
-+#define GIC_CPU_INT2 2 /* . */
-+#define GIC_CPU_INT3 3 /* . */
-+#define GIC_CPU_INT4 4 /* . */
-+#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
-+
-+#endif /* !(_SURFBOARD_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/surfboardint.h
-@@ -0,0 +1,190 @@
-+/*
-+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Defines for the Surfboard interrupt controller.
-+ *
-+ */
-+#ifndef _SURFBOARDINT_H
-+#define _SURFBOARDINT_H
-+
-+/* Number of IRQ supported on hw interrupt 0. */
-+#if defined (CONFIG_RALINK_RT2880)
-+#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */
-+#define SURFBOARDINT_GPIO 7 /* GPIO */
-+#define SURFBOARDINT_UART1 8 /* UART Lite */
-+#define SURFBOARDINT_UART 9 /* UART */
-+#define SURFBOARDINT_TIMER0 10 /* timer0 */
-+#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620)
-+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_NAND 8 /* NAND */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_SDXC 14 /* SDXC */
-+#define SURFBOARDINT_ESW 17 /* ESW */
-+#define SURFBOARDINT_UART1 12 /* UART Lite */
-+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
-+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
-+#define SURFBOARDINT_TIMER0 33 /* timer0 */
-+#define SURFBOARDINT_WDG 34 /* watch dog */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define SURFBOARDINT_PCM 36 /* PCM */
-+#define SURFBOARDINT_UART 37 /* UART */
-+#define RALINK_INT_PCIE0 13 /* PCIE0 */
-+#define RALINK_INT_PCIE1 14 /* PCIE1 */
-+
-+
-+#elif defined (CONFIG_RALINK_MT7628)
-+#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */
-+#define SURFBOARDINT_PCM 4 /* PCM */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_SPI 11 /* SPI */
-+#define SURFBOARDINT_AES 13 /* AES */
-+#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */
-+#define SURFBOARDINT_SDXC 14 /* SDXC */
-+#define SURFBOARDINT_ESW 17 /* ESW */
-+#define SURFBOARDINT_USB 18 /* USB */
-+#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */
-+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1
-+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2
-+#define SURFBOARDINT_WDG 23 /* WDG timer */
-+#define SURFBOARDINT_TIMER0 24 /* Timer0 */
-+#define SURFBOARDINT_TIMER1 25 /* Timer1 */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define RALINK_INT_PCIE0 2 /* PCIE0 */
-+
-+
-+#elif defined (CONFIG_RALINK_MT7621)
-+
-+#define SURFBOARDINT_FE 3 /* FE */
-+#define SURFBOARDINT_PCIE0 4 /* PCIE0 */
-+#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */
-+#define SURFBOARDINT_I2C 8 /* I2C */
-+#define SURFBOARDINT_DRAMC 9 /* DRAMC */
-+#define SURFBOARDINT_PCM 10 /* PCM */
-+#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */
-+#define SURFBOARDINT_GPIO 12 /* GPIO */
-+#define SURFBOARDINT_DMA 13 /* GDMA */
-+#define SURFBOARDINT_NAND 14 /* NAND */
-+#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */
-+#define SURFBOARDINT_I2S 16 /* I2S */
-+#define SURFBOARDINT_SPI 17 /* SPI */
-+#define SURFBOARDINT_SPDIF 18 /* SPDIF */
-+#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */
-+#define SURFBOARDINT_SDXC 20 /* SDXC */
-+#define SURFBOARDINT_PCTRL 21 /* Performance counter */
-+#define SURFBOARDINT_USB 22 /* USB */
-+#define SURFBOARDINT_ESW 31 /* Switch */
-+#define SURFBOARDINT_PCIE1 24 /* PCIE1 */
-+#define SURFBOARDINT_PCIE2 25 /* PCIE2 */
-+#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */
-+#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */
-+#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0
-+#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1
-+
-+#define SURFBOARDINT_WDG 29 /* WDG timer */
-+#define SURFBOARDINT_TIMER0 30 /* Timer0 */
-+#define SURFBOARDINT_TIMER1 31 /* Timer1 */
-+
-+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
-+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
-+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
-+
-+#elif defined (CONFIG_RALINK_RT3883)
-+#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */
-+#define SURFBOARDINT_GPIO 6 /* GPIO */
-+#define SURFBOARDINT_DMA 7 /* DMA */
-+#define SURFBOARDINT_NAND 8 /* NAND */
-+#define SURFBOARDINT_PC 9 /* Performance counter */
-+#define SURFBOARDINT_I2S 10 /* I2S */
-+#define SURFBOARDINT_UART1 12 /* UART Lite */
-+#define SURFBOARDINT_PCI 18 /* PCI */
-+#define SURFBOARDINT_UDEV 19 /* USB Device */
-+#define SURFBOARDINT_UHST 20 /* USB Host */
-+#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */
-+#define SURFBOARDINT_TIMER0 33 /* timer0 */
-+#define SURFBOARDINT_ILL_ACC 35 /* illegal access */
-+#define SURFBOARDINT_PCM 36 /* PCM */
-+#define SURFBOARDINT_UART 37 /* UART */
-+#endif
-+
-+#define SURFBOARDINT_END 64
-+#define RT2880_INTERINT_START 40
-+
-+/* Global interrupt bit definitions */
-+#define C_SURFBOARD_GLOBAL_INT 31
-+#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT)
-+
-+/* added ??? */
-+#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310)
-+#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314)
-+/* end of added, bobtseng */
-+
-+/*
-+ * Surfboard registers are memory mapped on 32-bit aligned boundaries and
-+ * only word access are allowed.
-+ */
-+#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT
-+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT
-+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL
-+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE
-+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET
-+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR
-+#else
-+#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0)
-+#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4)
-+#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20)
-+#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30)
-+#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34)
-+#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38)
-+#endif
-+
-+/* bobtseng added ++, 2006.3.6. */
-+#define read_32bit_cp0_register(source) \
-+({ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tpush\n\t" \
-+ ".set\treorder\n\t" \
-+ "mfc0\t%0,"STR(source)"\n\t" \
-+ ".set\tpop" \
-+ : "=r" (__res)); \
-+ __res;})
-+
-+#define write_32bit_cp0_register(register,value) \
-+ __asm__ __volatile__( \
-+ "mtc0\t%0,"STR(register)"\n\t" \
-+ "nop" \
-+ : : "r" (value));
-+
-+/* bobtseng added --, 2006.3.6. */
-+
-+void surfboardint_init(void);
-+u32 get_surfboard_sysclk(void);
-+
-+
-+#endif /* !(_SURFBOARDINT_H) */
---- /dev/null
-+++ b/arch/mips/include/asm/rt2880/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-+#define __ASM_MIPS_MACH_MIPS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 1
-+#define MIPS_CACHE_SYNC_WAR 1
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 1
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch b/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch
deleted file mode 100644
index 6821da1..0000000
--- a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -17,46 +17,27 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt288x.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT2880_GPIO_MODE_I2C,
-- .gpio_first = 1,
-- .gpio_last = 2,
-- }, {
-- .name = "spi",
-- .mask = RT2880_GPIO_MODE_SPI,
-- .gpio_first = 3,
-- .gpio_last = 6,
-- }, {
-- .name = "uartlite",
-- .mask = RT2880_GPIO_MODE_UART0,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "jtag",
-- .mask = RT2880_GPIO_MODE_JTAG,
-- .gpio_first = 17,
-- .gpio_last = 21,
-- }, {
-- .name = "mdio",
-- .mask = RT2880_GPIO_MODE_MDIO,
-- .gpio_first = 22,
-- .gpio_last = 23,
-- }, {
-- .name = "sdram",
-- .mask = RT2880_GPIO_MODE_SDRAM,
-- .gpio_first = 24,
-- .gpio_last = 39,
-- }, {
-- .name = "pci",
-- .mask = RT2880_GPIO_MODE_PCI,
-- .gpio_first = 40,
-- .gpio_last = 71,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-+static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
-+
-+static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
-+ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
-+ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
-+ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
-+ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
-+ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
-+ { 0 }
- };
-
- static void rt288x_wdt_reset(void)
-@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
- rt_sysc_w32(t, SYSC_REG_CLKCFG);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .wdt_reset = rt288x_wdt_reset,
--};
--
- void __init ralink_clk_init(void)
- {
- unsigned long cpu_rate;
-@@ -140,4 +116,6 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT2880_SDRAM_BASE;
- soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
-+
-+ rt2880_pinmux_data = rt2880_pinmux_data_act;
- }
diff --git a/target/linux/ramips/patches-3.10/0218-rt2880-add-wmac-clock.patch b/target/linux/ramips/patches-3.10/0218-rt2880-add-wmac-clock.patch
deleted file mode 100644
index d7f8a2f..0000000
--- a/target/linux/ramips/patches-3.10/0218-rt2880-add-wmac-clock.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -52,7 +52,7 @@ static void rt288x_wdt_reset(void)
-
- void __init ralink_clk_init(void)
- {
-- unsigned long cpu_rate;
-+ unsigned long cpu_rate, wmac_rate = 40000000;
- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
-
-@@ -77,6 +77,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("300500.uart", cpu_rate / 2);
- ralink_clk_add("300c00.uartlite", cpu_rate / 2);
- ralink_clk_add("400000.ethernet", cpu_rate / 2);
-+ ralink_clk_add("480000.wmac", wmac_rate);
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch b/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
deleted file mode 100644
index bc92a02..0000000
--- a/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Index: linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
-===================================================================
---- linux-3.10.34.orig/drivers/net/ethernet/ralink/mdio_rt2880.c
-+++ linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
-@@ -136,7 +136,7 @@ int rt2880_mdio_read(struct mii_bus *bus
- if (err)
- return 0xffff;
-
-- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
- phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-
- return fe_r32(FE_MDIO_ACCESS) & 0xffff;
-@@ -148,7 +148,7 @@ int rt2880_mdio_write(struct mii_bus *bu
- int err;
- u32 t;
-
-- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
- phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-
- err = rt2880_mdio_wait_ready(priv);
diff --git a/target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch b/target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch
deleted file mode 100644
index bdcf7f0..0000000
--- a/target/linux/ramips/patches-3.10/0221-pinmux-rt5350-spi_cs1.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -145,6 +145,7 @@ static inline int soc_is_rt5350(void)
- #define RT305X_GPIO_MODE_SDRAM 8
- #define RT305X_GPIO_MODE_RGMII 9
- #define RT5350_GPIO_MODE_PHY_LED 14
-+#define RT5350_GPIO_MODE_SPI_CS1 21
- #define RT3352_GPIO_MODE_LNA 18
- #define RT3352_GPIO_MODE_PA 20
-
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -38,6 +38,10 @@ static struct rt2880_pmx_func uartlite_f
- static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
- static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
- static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-+static struct rt2880_pmx_func rt5350_cs1_func[] = {
-+ FUNC("spi_cs1", 0, 27, 1),
-+ FUNC("wdg_cs1", 1, 27, 1),
-+};
- static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
- static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
- static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-@@ -81,6 +85,7 @@ static struct rt2880_pmx_group rt5350_pi
- GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
- GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
- GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
- { 0 }
- };
-
diff --git a/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch
deleted file mode 100644
index 64c4150..0000000
--- a/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch
+++ /dev/null
@@ -1,368 +0,0 @@
---- a/drivers/spi/spi-rt2880.c
-+++ b/drivers/spi/spi-rt2880.c
-@@ -29,16 +29,17 @@
- #define SPI_BPW_MASK(bits) BIT((bits) - 1)
-
- #define DRIVER_NAME "spi-rt2880"
--/* only one slave is supported*/
--#define RALINK_NUM_CHIPSELECTS 1
- /* in usec */
- #define RALINK_SPI_WAIT_MAX_LOOP 2000
-
--#define RAMIPS_SPI_STAT 0x00
--#define RAMIPS_SPI_CFG 0x10
--#define RAMIPS_SPI_CTL 0x14
--#define RAMIPS_SPI_DATA 0x20
--#define RAMIPS_SPI_FIFO_STAT 0x38
-+#define RAMIPS_SPI_DEV_OFFSET 0x40
-+
-+#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET))
-+#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET))
-+#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET))
-+#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET))
-+#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET))
-+#define RAMIPS_SPI_ARBITER 0xF0
-
- /* SPISTAT register bit field */
- #define SPISTAT_BUSY BIT(0)
-@@ -68,6 +69,10 @@
- /* SPIFIFOSTAT register bit field */
- #define SPIFIFOSTAT_TXFULL BIT(17)
-
-+#define SPICTL_ARB_EN BIT(31)
-+#define SPI1_POR BIT(1)
-+#define SPI0_POR BIT(0)
-+
- #define MT7621_SPI_TRANS 0x00
- #define SPITRANS_BUSY BIT(16)
- #define MT7621_SPI_OPCODE 0x04
-@@ -78,13 +83,16 @@
- #define MT7621_SPI_MASTER 0x28
- #define MT7621_SPI_SPACE 0x3c
-
-+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
-+
- struct rt2880_spi;
-
- struct rt2880_spi_ops {
- void (*init_hw)(struct rt2880_spi *rs);
-- void (*set_cs)(struct rt2880_spi *rs, int enable);
-+ void (*set_cs)(struct spi_device *spi, int enable);
- int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
- unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
-+ int num_cs;
- };
-
- struct rt2880_spi {
-@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st
-
- static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
- {
-+ int cs = spi->chip_select;
- struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
- u32 rate;
- u32 prescale;
-@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc
- prescale = ilog2(rate / 2);
- dev_dbg(&spi->dev, "prescale:%u\n", prescale);
-
-- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
- reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
-- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
- rs->speed = speed;
- return 0;
- }
-@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev
- {
- struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
- unsigned int speed = spi->max_speed_hz;
-- int rc;
-+ int rc, cs = spi->chip_select;
-+ u32 reg;
-
- if ((t != NULL) && t->speed_hz)
- speed = t->speed_hz;
-@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev
- return rc;
- }
-
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
-+
-+ reg = (reg & ~SPICFG_MSBFIRST);
-+ if (!(spi->mode & SPI_LSB_FIRST))
-+ reg |= SPICFG_MSBFIRST;
-+
-+ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING));
-+ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+ case SPI_MODE_0:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_1:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_2:
-+ reg |= SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_3:
-+ reg |= SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ }
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
-+
-+ reg = SPICTL_ARB_EN;
-+ if (spi->mode & SPI_CS_HIGH) {
-+ switch(cs) {
-+ case 0:
-+ reg |= SPI0_POR;
-+ break;
-+ case 1:
-+ reg |= SPI1_POR;
-+ break;
-+ }
-+ }
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg);
-+
- return 0;
- }
-
--static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
-+static void rt2880_spi_set_cs(struct spi_device *spi, int enable)
- {
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ int cs = spi->chip_select;
-+
- if (enable)
-- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
- else
-- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
- }
-
--static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
-+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
- {
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
- u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
-
- if (enable)
-@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2
- rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
- }
-
--static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
-+static inline int rt2880_spi_wait_till_ready(struct spi_device *spi)
- {
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ int cs = spi->chip_select;
- int i;
-
- for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
- u32 status;
-
-- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
-+ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs));
- if ((status & SPISTAT_BUSY) == 0)
- return 0;
-
-@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r
- return -ETIMEDOUT;
- }
-
--static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
-+static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
- {
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
- int i;
-
- for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
-@@ -268,6 +323,7 @@ static unsigned int
- rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
- {
- struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ int cs = spi->chip_select;
- unsigned count = 0;
- u8 *rx = xfer->rx_buf;
- const u8 *tx = xfer->tx_buf;
-@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device
-
- if (tx) {
- for (count = 0; count < xfer->len; count++) {
-- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
-- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-- err = rt2880_spi_wait_till_ready(rs);
-+ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR);
-+ err = rt2880_spi_wait_till_ready(spi);
- if (err) {
- dev_err(&spi->dev, "TX failed, err=%d\n", err);
- goto out;
-@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device
-
- if (rx) {
- for (count = 0; count < xfer->len; count++) {
-- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-- err = rt2880_spi_wait_till_ready(rs);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD);
-+ err = rt2880_spi_wait_till_ready(spi);
- if (err) {
- dev_err(&spi->dev, "RX failed, err=%d\n", err);
- goto out;
- }
-- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs));
- }
- }
-
-@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device
- trans |= SPI_CTL_START;
- rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
-
-- mt7621_spi_wait_till_ready(rs);
-+ mt7621_spi_wait_till_ready(spi);
-
- if (rx) {
- u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
-@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa
- }
-
- if (!cs_active) {
-- rs->ops->set_cs(rs, 1);
-+ rs->ops->set_cs(spi, 1);
- cs_active = 1;
- }
-
-@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa
- udelay(t->delay_usecs);
-
- if (t->cs_change) {
-- rs->ops->set_cs(rs, 0);
-+ rs->ops->set_cs(spi, 0);
- cs_active = 0;
- }
- }
-
- msg_done:
- if (cs_active)
-- rs->ops->set_cs(rs, 0);
-+ rs->ops->set_cs(spi, 0);
-
- m->status = status;
- spi_finalize_current_message(master);
-@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d
- struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-
- if ((spi->max_speed_hz == 0) ||
-- (spi->max_speed_hz > (rs->sys_freq / 2)))
-+ (spi->max_speed_hz > (rs->sys_freq / 2)))
- spi->max_speed_hz = (rs->sys_freq / 2);
-
- if (spi->max_speed_hz < (rs->sys_freq / 128)) {
-@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d
-
- static void rt2880_spi_reset(struct rt2880_spi *rs)
- {
-- rt2880_spi_write(rs, RAMIPS_SPI_CFG,
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0),
- SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
- SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
-- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA);
-+}
-+
-+static void rt5350_spi_reset(struct rt2880_spi *rs)
-+{
-+ int cs;
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER,
-+ SPICTL_ARB_EN);
-+
-+ for (cs = 0; cs < rs->ops->num_cs; cs++) {
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs),
-+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA);
-+ }
- }
-
- static void mt7621_spi_reset(struct rt2880_spi *rs)
-@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] =
- .set_cs = rt2880_spi_set_cs,
- .baudrate_set = rt2880_spi_baudrate_set,
- .write_read = rt2880_spi_write_read,
-+ .num_cs = 1,
-+ }, {
-+ .init_hw = rt5350_spi_reset,
-+ .set_cs = rt2880_spi_set_cs,
-+ .baudrate_set = rt2880_spi_baudrate_set,
-+ .write_read = rt2880_spi_write_read,
-+ .num_cs = 2,
- }, {
- .init_hw = mt7621_spi_reset,
- .set_cs = mt7621_spi_set_cs,
- .baudrate_set = mt7621_spi_baudrate_set,
- .write_read = mt7621_spi_write_read,
-+ .num_cs = 1,
- },
- };
-
- static const struct of_device_id rt2880_spi_match[] = {
- { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
-- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
-+ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]},
-+ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] },
- {},
- };
- MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-
- static int rt2880_spi_probe(struct platform_device *pdev)
- {
-- const struct of_device_id *match;
-+ const struct of_device_id *match;
- struct spi_master *master;
- struct rt2880_spi *rs;
- unsigned long flags;
-@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf
- struct resource *r;
- int status = 0;
- struct clk *clk;
-+ struct rt2880_spi_ops *ops;
-
-- match = of_match_device(rt2880_spi_match, &pdev->dev);
-+ match = of_match_device(rt2880_spi_match, &pdev->dev);
- if (!match)
- return -EINVAL;
-+ ops = (struct rt2880_spi_ops *)match->data;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, r);
-@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf
- return -ENOMEM;
- }
-
-- /* we support only mode 0, and no options */
-- master->mode_bits = 0;
-+ master->mode_bits = RT2880_SPI_MODE_BITS;
-
- master->setup = rt2880_spi_setup;
- master->transfer_one_message = rt2880_spi_transfer_one_message;
-- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
- master->bits_per_word_mask = SPI_BPW_MASK(8);
- master->dev.of_node = pdev->dev.of_node;
-+ master->num_chipselect = ops->num_cs;
-
- dev_set_drvdata(&pdev->dev, master);
-
-@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf
- rs->clk = clk;
- rs->master = master;
- rs->sys_freq = clk_get_rate(rs->clk);
-- rs->ops = (struct rt2880_spi_ops *) match->data;
-+ rs->ops = ops;
- dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
- spin_lock_irqsave(&rs->lock, flags);
-
diff --git a/target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch b/target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch
deleted file mode 100644
index 1a00dc2..0000000
--- a/target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From c174d2250e402399ad7dbdd57d51883d8804bba0 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:40:37 +0200
-Subject: [PATCH 31/33] owrt: MIPS: add OWRTDTB secion
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/head.S | 3 +++
- arch/mips/ralink/Makefile | 2 +-
- arch/mips/ralink/of.c | 4 +++-
- 3 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
- .fill 0x400
- #endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-+ .ascii "OWRTDTB:"
-+ EXPORT(__image_dtb)
-+ .fill 0x4000
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -26,4 +26,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_DEBUG_FS) += bootrom.o
-
--obj-y += dts/
-+#obj-y += dts/
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem
- return 0;
- }
-
-+extern struct boot_param_header __image_dtb;
-+
- void __init plat_mem_setup(void)
- {
- set_io_port_base(KSEG1);
-@@ -98,7 +100,7 @@ void __init plat_mem_setup(void)
- * Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing
- */
-- __dt_setup_arch(&__dtb_start);
-+ __dt_setup_arch(&__image_dtb);
-
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
diff --git a/target/linux/ramips/patches-3.10/0400-MIPS-ralink-define-clock-for-wmac-on-rt3883.patch b/target/linux/ramips/patches-3.10/0400-MIPS-ralink-define-clock-for-wmac-on-rt3883.patch
deleted file mode 100644
index c781da6..0000000
--- a/target/linux/ramips/patches-3.10/0400-MIPS-ralink-define-clock-for-wmac-on-rt3883.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -111,6 +111,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", 40000000);
- ralink_clk_add("10100000.ethernet", sys_rate);
-+ ralink_clk_add("10180000.wmac", 40000000);
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.10/0401-mt7620n-add-wmac-clock.patch b/target/linux/ramips/patches-3.10/0401-mt7620n-add-wmac-clock.patch
deleted file mode 100644
index af5a252..0000000
--- a/target/linux/ramips/patches-3.10/0401-mt7620n-add-wmac-clock.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- linux-3.10.26/arch/mips/ralink/mt7620.c 2014-01-15 21:49:41.368793580 +0200
-+++ linux-3.10.26/arch/mips/ralink/mt7620.c 2014-01-15 19:33:32.022038160 +0200
-@@ -105,12 +105,15 @@
-
- void __init ralink_clk_init(void)
- {
-- unsigned long cpu_rate, sys_rate;
-+ unsigned long cpu_rate, sys_rate, xtal_freq;
- u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
- u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
- u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
- u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
-
-+ u32 syscfg0 = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-+ xtal_freq = (syscfg0 & 0x40) ? 40000000 : 20000000;
-+
- if (cpu_clk) {
- cpu_rate = 480000000;
- } else if (!swconfig) {
-@@ -133,6 +136,7 @@
- ralink_clk_add("10000500.uart", 40000000);
- ralink_clk_add("10000b00.spi", 40000000);
- ralink_clk_add("10000c00.uartlite", 40000000);
-+ ralink_clk_add("10180000.wmac", xtal_freq);
-
- if (IS_ENABLED(CONFIG_USB)) {
- /*
diff --git a/target/linux/ramips/rt288x/config-3.10 b/target/linux/ramips/rt288x/config-3.10
deleted file mode 100644
index 6fd3971..0000000
--- a/target/linux/ramips/rt288x/config-3.10
+++ /dev/null
@@ -1,166 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-# CONFIG_DEBUG_PINCTRL is not set
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT2880_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
-CONFIG_IRQ_WORK=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PCI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_WDT=y
-CONFIG_RA_NAT_NONE=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-CONFIG_SOC_RT288X=y
-# CONFIG_SOC_RT305X is not set
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.10 b/target/linux/ramips/rt305x/config-3.10
deleted file mode 100644
index fc79dec..0000000
--- a/target/linux/ramips/rt305x/config-3.10
+++ /dev/null
@@ -1,169 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-# CONFIG_CLKEVT_RT3352 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT305X_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-# CONFIG_DWC_OTG is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK=y
-CONFIG_NET_RALINK_ESW_RT3052=y
-CONFIG_NLS=m
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_USBPHY=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SAMSUNG_USBPHY is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-CONFIG_SOC_RT305X=y
-# CONFIG_SOC_RT3883 is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt3883/config-3.10 b/target/linux/ramips/rt3883/config-3.10
deleted file mode 100644
index 6f56d5b..0000000
--- a/target/linux/ramips/rt3883/config-3.10
+++ /dev/null
@@ -1,179 +0,0 @@
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DEBUG_PINCTRL=y
-CONFIG_DMA_NONCOHERENT=y
-# CONFIG_DTB_RT3883_EVAL is not set
-CONFIG_DTB_RT_NONE=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_RALINK=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MACH_CLKDEV=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MII is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_RALINK=y
-CONFIG_NET_RALINK_MDIO=y
-CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NLS=m
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PINCONF is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RT2880=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINMUX=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RALINK=y
-CONFIG_RALINK_USBPHY=y
-CONFIG_RALINK_WDT=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367B_PHY=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SAMSUNG_USBPHY is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RT288X=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
-# CONFIG_SOC_RT288X is not set
-# CONFIG_SOC_RT305X is not set
-CONFIG_SOC_RT3883=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB=m
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=m
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_ZONE_DMA_FLAG=0