mvebu: drop linux 3.14 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828

16 files changed, 0 insertions, 1804 deletions

diff --git a/target/linux/mvebu/config-3.14 b/target/linux/mvebu/config-3.14
deleted file mode 100644
index 8cf6ee3..0000000
--- a/target/linux/mvebu/config-3.14
+++ /dev/null
@@ -1,297 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-CONFIG_DEBUG_MVEBU_UART=y
-# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-CONFIG_MACH_ARMADA_370_XP=y
-CONFIG_MACH_ARMADA_XP=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_PCI=y
-# CONFIG_MLX5_CORE is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVSW61XX_PHY=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_RX_BUSY_POLL=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_STATS=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-# CONFIG_ZBUD is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch
deleted file mode 100644
index 4ed10b3..0000000
--- a/target/linux/mvebu/patches-3.14/001-build_mamba_dts.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-d
- 	armada-xp-db.dtb \
- 	armada-xp-gp.dtb \
- 	armada-xp-netgear-rn2120.dtb \
-+	armada-xp-mamba.dtb \
- 	armada-xp-matrix.dtb \
- 	armada-xp-openblocks-ax3-4.dtb
- dtb-$(CONFIG_ARCH_MXC) += \
diff --git a/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch
deleted file mode 100644
index 77dc1a6..0000000
--- a/target/linux/mvebu/patches-3.14/002-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -43,12 +43,10 @@
- 			};
- 
- 			i2c0: i2c@11000 {
--				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 				reg = <0x11000 0x100>;
- 			};
- 
- 			i2c1: i2c@11100 {
--				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 				reg = <0x11100 0x100>;
- 			};
- 
diff --git a/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch b/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch
deleted file mode 100644
index fea668d..0000000
--- a/target/linux/mvebu/patches-3.14/003-add_leds_tlc59116_driver.patch
+++ /dev/null
@@ -1,529 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -487,6 +487,15 @@ config LEDS_BLINKM
- 	  This option enables support for the BlinkM RGB LED connected
- 	  through I2C. Say Y to enable support for the BlinkM LED.
- 
-+config LEDS_TLC59116
-+	tristate "LED driver for TLC59116F dimmer"
-+	depends on LEDS_CLASS
-+	depends on I2C
-+	help
-+	  This option enables support for Texas Instruments TLC59116F
-+	  LED controller. It is generally only useful
-+	  as a platform driver
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
- 
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.
- obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
- obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
- obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
-+obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
- 
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
---- /dev/null
-+++ b/drivers/leds/leds-tlc59116.c
-@@ -0,0 +1,498 @@
-+/*
-+ * Copyright 2014 Belkin Inc.
-+ *
-+ * Author: Belkin Inc.
-+ *
-+ * This file is subject to the terms and conditions of version 2 of
-+ * the GNU General Public License.  See the file COPYING in the main
-+ * directory of this archive for more details.
-+ *
-+ * LED driver for various TLC59116 I2C LED drivers
-+  */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/ctype.h>
-+#include <linux/leds.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/workqueue.h>
-+
-+/* LED select registers determine the source that drives LED outputs */
-+#define TLC59116_LED_OFF	0x0	/* Output LOW */
-+#define TLC59116_LED_ON	0x1	/* Output HI-Z */
-+#define TLC59116_DIM	0x2	/* Dimming */
-+#define TLC59116_BLINK	0x3	/* Blinking */
-+
-+#define TLC59116_PINS		16
-+#define TLC59116_REG_MODE1	0x00	/* Mode register 0 */
-+#define MODE1_RESPON_ADDR_MASK	0xF0
-+#define MODE1_NORMAL_MODE	(0 << 4)
-+#define MODE1_SPEED_MODE	(1 << 4)
-+
-+#define TLC59116_REG_MODE2	0x01	/* Mode register 1 */
-+#define MODE2_DIM		(0 << 5)
-+#define MODE2_BLINK		(1 << 5)
-+#define MODE2_OCH_STOP                  (0 << 3)
-+#define MODE2_OCH_ACK                   (1 << 3)
-+
-+#define TLC59116_REG_PWM0	0x02
-+#define TLC59116_REG_PWM1	0x03
-+#define TLC59116_REG_PWM2	0x04
-+#define TLC59116_REG_PWM3	0x05
-+#define TLC59116_REG_PWM4	0x06
-+#define TLC59116_REG_PWM5	0x07
-+#define TLC59116_REG_PWM6	0x08
-+#define TLC59116_REG_PWM7	0x09
-+#define TLC59116_REG_PWM8	0x0a
-+#define TLC59116_REG_PWM9	0x0b
-+#define TLC59116_REG_PWM10	0x0c
-+#define TLC59116_REG_PWM11	0x0d
-+#define TLC59116_REG_PWM12	0x0e
-+#define TLC59116_REG_PWM13	0x0f
-+#define TLC59116_REG_PWM14	0x10
-+#define TLC59116_REG_PWM15	0x01
-+
-+#define TLC59116_REG_GRPPWM	0x12
-+#define TLC59116_REG_GRPFREQ	0x13
-+
-+#define TLC59116_PERIOD_MIN	41	/* 41ms */
-+#define TLC59116_PERIOD_MAX	10730	/* 10.73s */
-+
-+#define TLC59116_REG_LEDOUT0         0x14    /* LED [3:0] driver output state registers */              
-+#define TLC59116_REG_LEDOUT1         0x15    /* LED [7:4] driver output state registers */
-+#define TLC59116_REG_LEDOUT2         0x16    /* LED [11:8] driver output state registers */
-+#define TLC59116_REG_LEDOUT3         0x17    /* LED [15:12] driver output state registers */
-+
-+#define GPIO0_MASK        0x3
-+
-+#define DEBUG 0
-+
-+#if DEBUG > 1
-+#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg)
-+#else
-+#define led_dbg(fmt, arg...)
-+#endif
-+
-+
-+#if DEBUG > 0
-+#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg)
-+#else
-+#define led_info(fmt, arg...)
-+#endif
-+
-+enum tlc59116_type {
-+	tlc59116,
-+};
-+
-+struct tlc59116_chipdef {
-+	int			bits;
-+	u8			slv_addr;	/* 7-bit slave address mask */
-+	int			slv_addr_shift;	/* Number of bits to ignore */
-+};
-+
-+static struct tlc59116_chipdef tlc59116_chipdefs[] = {
-+	[tlc59116] = {
-+		.bits		= 16,
-+		.slv_addr	= /* 1100xxx */ 0x68,
-+		.slv_addr_shift	= 3,
-+	},
-+};
-+
-+static const struct i2c_device_id tlc59116_id[] = {
-+	{ "tlc59116", tlc59116 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
-+
-+struct tlc59116_led {
-+	struct tlc59116_chipdef	*chipdef;
-+	struct i2c_client	*client;
-+	struct work_struct	work;
-+	spinlock_t		lock;
-+	enum led_brightness	brightness;
-+	struct led_classdev	led_cdev;
-+	int			led_num;	/* 0 .. 8 potentially */
-+	char			name[32];
-+};
-+
-+//#define DUMP_REGS
-+
-+#ifdef DUMP_REGS
-+void dump_regs(struct i2c_client *client)
-+{
-+        int i, j = 0;
-+        u8 data;
-+        printk ("\n-------------------------------------\n");
-+        for (i = 0; i< 0x20; i++)
-+        {
-+                data = i2c_smbus_read_byte_data(client, i);
-+		printk ("[0x%x] = 0x%x ",i, data);
-+                j++;
-+                if (j == 5)
-+                {
-+                        printk ("\n");
-+                        j = 0;
-+                }
-+        }
-+        printk ("\n");
-+}
-+#endif
-+
-+static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode)
-+{
-+	uint8_t val = 0;
-+	
-+	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
-+		mode = MODE2_DIM;
-+
-+	/* Configure MODE1 register */
-+	val &= 0x0;
-+	val &= MODE1_RESPON_ADDR_MASK;
-+	val |= MODE1_NORMAL_MODE;
-+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val);
-+
-+        /* Configure MODE2 Reg */
-+        val &= 0x00;
-+        val |= MODE2_OCH_STOP;
-+
-+        val |= mode;
-+
-+        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val);
-+        mdelay(100);
-+	
-+	return 0;
-+}
-+
-+static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode)
-+{
-+        char data, addr = 0, i;
-+
-+        if ((gpio_no >= 0) && (gpio_no < 4))
-+                addr = TLC59116_REG_LEDOUT0;
-+        else if ((gpio_no >= 4) && (gpio_no < 8))
-+                addr = TLC59116_REG_LEDOUT1;
-+        else if ((gpio_no >= 8) && (gpio_no < 12))
-+                addr = TLC59116_REG_LEDOUT2;
-+        else if ((gpio_no >=12 ) && (gpio_no < 16))
-+                addr = TLC59116_REG_LEDOUT3;
-+
-+        data = i2c_smbus_read_byte_data(client, addr);
-+
-+        i = (gpio_no % 4) * 2;
-+
-+        data &= ~(GPIO0_MASK << i);
-+        act_mode = act_mode << i;
-+        data |= act_mode;
-+
-+        if(i2c_smbus_write_byte_data(client, addr, data) != 0) {
-+                return -1;
-+        }
-+        return 0;
-+}
-+
-+static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val)
-+{
-+	val &= 0x03;
-+        tlc59116_set_gpio_act(client, gpio_no, val);
-+#ifdef DUMP_REGS
-+	dump_regs(client);
-+#endif
-+        return 0;
-+}
-+
-+static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no)
-+{
-+	uint8_t val, reg, data;
-+	
-+	led_dbg("gpio = %d\n", gpio_no);
-+	reg = TLC59116_REG_LEDOUT0;
-+
-+        if ((gpio_no >= 0) && (gpio_no < 4))
-+                reg = TLC59116_REG_LEDOUT0;
-+        else if ((gpio_no >= 4) && (gpio_no < 8)) {
-+                reg = TLC59116_REG_LEDOUT1;
-+		gpio_no = gpio_no - 4;
-+	}
-+        else if ((gpio_no >= 8) && (gpio_no < 12)) {
-+                reg = TLC59116_REG_LEDOUT2;
-+		gpio_no = gpio_no - 8;
-+	}
-+        else if ((gpio_no >=12 ) && (gpio_no < 16)) {
-+                reg = TLC59116_REG_LEDOUT3;
-+		gpio_no = gpio_no - 12;
-+	}
-+	
-+	val = i2c_smbus_read_byte_data(client, reg);
-+
-+	data = (val >> (gpio_no * 2)) & 0x03;
-+	return data;
-+}
-+
-+/*
-+ * gpio_no [0..7]
-+ * duty_cycle [0..99]%
-+ * 
-+ * */
-+static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness)
-+{
-+	uint8_t pwm;
-+
-+	pwm = gpio_no + TLC59116_REG_PWM0;
-+        i2c_smbus_write_byte_data(client, pwm, brightness);
-+
-+        return 0;
-+}
-+
-+static void tlc59116_led_work(struct work_struct *work)
-+{
-+	struct tlc59116_led *tlc59116;
-+
-+	tlc59116 = container_of(work, struct tlc59116_led, work);
-+
-+	led_dbg("\nbrighness = %d \n", tlc59116->brightness);
-+	switch (tlc59116->brightness) {
-+	case LED_OFF:
-+		led_info("\nLed off\n");
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF);
-+		break;
-+
-+	case LED_FULL:
-+		led_info("\nLed on\n");
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON);
-+		break;
-+	default:
-+		led_info("\nBrightness is %d\n", tlc59116->brightness);
-+		if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num))
-+			tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM);
-+
-+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+		break;
-+	}
-+
-+}
-+
-+static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+	struct tlc59116_led *tlc59116;
-+
-+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
-+
-+	spin_lock(&tlc59116->lock);
-+	tlc59116->brightness = value;
-+
-+	/*
-+	 * Must use workqueue for the actual I/O since I2C operations
-+	 * can sleep.
-+	 */
-+	schedule_work(&tlc59116->work);
-+
-+	spin_unlock(&tlc59116->lock);
-+}
-+
-+/*
-+ * delay_on, delay_off: units are in ms
-+ *
-+ */
-+
-+static int tlc59116_set_blink(struct led_classdev *led_cdev,
-+				unsigned long *delay_on,
-+				unsigned long *delay_off)
-+{
-+	struct tlc59116_led *tlc59116;
-+	uint16_t	period;
-+	uint16_t	duty_cycle;
-+	uint8_t		gdc;
-+	uint8_t		gfrq;
-+	
-+	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
-+	led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n", 
-+				*delay_on, *delay_off, tlc59116->brightness);
-+
-+	// Hardware blinking only for tricolor leds . The rest will have software blinking
-+	if (tlc59116->led_num > 2) 
-+		return 1;
-+
-+	if ((*delay_on == 0) && (*delay_off ==0)) {
-+		spin_lock(&tlc59116->lock);
-+
-+		/* MODE2[DMBLNK] = 1 */
-+		tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
-+
-+		/* Set LDRx = 11 */
-+		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
-+
-+		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+		spin_unlock(&tlc59116->lock);
-+		return 0;
-+	}
-+
-+
-+	if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX)
-+	{
-+		led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX);
-+		return -EINVAL;
-+	}
-+
-+	if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN)
-+	{
-+		*delay_on = TLC59116_PERIOD_MIN/2 + 1;
-+		*delay_off = TLC59116_PERIOD_MIN/2 + 1;
-+	}
-+	period = (*delay_on) + (*delay_off);
-+
-+	duty_cycle = (100 * (*delay_on)) / period;
-+
-+	spin_lock(&tlc59116->lock);
-+	
-+	/* MODE2[DMBLNK] = 1 */
-+	tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
-+
-+	/* Set LDRx = 11 */
-+	tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
-+
-+	tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
-+
-+	gdc = (duty_cycle * 256)/100;
-+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc);	
-+
-+	gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */
-+	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq);		
-+	
-+
-+#ifdef DUMP_REGS
-+	dump_regs(tlc59116->client);
-+#endif
-+
-+	spin_unlock(&tlc59116->lock);
-+	return 0;
-+}
-+
-+static int tlc59116_probe(struct i2c_client *client,
-+					const struct i2c_device_id *id)
-+{
-+	struct tlc59116_led *tlc59116;
-+	struct tlc59116_chipdef *chip;
-+	struct i2c_adapter *adapter;
-+	struct led_platform_data *pdata;
-+	int i, err;
-+
-+	chip = &tlc59116_chipdefs[id->driver_data];
-+	adapter = to_i2c_adapter(client->dev.parent);
-+	pdata = client->dev.platform_data;
-+
-+	/* Make sure the slave address / chip type combo given is possible */
-+	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
-+	    chip->slv_addr) {
-+		dev_err(&client->dev, "invalid slave address %02x\n",
-+				client->addr);
-+		return -ENODEV;
-+	}
-+
-+	printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at "
-+			"slave address 0x%02x\n",
-+			id->name, chip->bits, client->addr);
-+
-+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
-+		return -EIO;
-+
-+	if (pdata) {
-+		if (pdata->num_leds != chip->bits) {
-+			dev_err(&client->dev, "board info claims %d LEDs"
-+					" on a %d-bit chip\n",
-+					pdata->num_leds, chip->bits);
-+			return -ENODEV;
-+		}
-+	}
-+
-+	tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL);
-+	if (!tlc59116)
-+		return -ENOMEM;
-+
-+	i2c_set_clientdata(client, tlc59116);
-+
-+	for (i = 0; i < chip->bits; i++) {
-+		tlc59116[i].chipdef = chip;
-+		tlc59116[i].client = client;
-+		tlc59116[i].led_num = i;
-+
-+		/* Platform data can specify LED names and default triggers */
-+		if (pdata) {
-+			if (pdata->leds[i].name)
-+				snprintf(tlc59116[i].name,
-+					 sizeof(tlc59116[i].name), "tlc59116:%s",
-+					 pdata->leds[i].name);
-+			if (pdata->leds[i].default_trigger)
-+				tlc59116[i].led_cdev.default_trigger =
-+					pdata->leds[i].default_trigger;
-+		} else {
-+			snprintf(tlc59116[i].name, sizeof(tlc59116[i].name),
-+				 "tlc59116:%d", i);
-+		}
-+
-+		spin_lock_init(&tlc59116[i].lock);
-+
-+		tlc59116[i].led_cdev.name = tlc59116[i].name;
-+		tlc59116[i].led_cdev.brightness_set = tlc59116_led_set;
-+	        tlc59116[i].led_cdev.blink_set = tlc59116_set_blink;	
-+		tlc59116[i].led_cdev.brightness = 0;
-+
-+		INIT_WORK(&tlc59116[i].work, tlc59116_led_work);
-+
-+		err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev);
-+		if (err < 0)
-+			goto exit;
-+	}
-+		
-+        tlc59116_set_mode(client, MODE2_DIM);
-+
-+	/* Turn off LEDs */
-+	for (i = 0; i < chip->bits; i++)
-+		tlc59116_set_gpio(client, i, TLC59116_LED_OFF);
-+
-+	return 0;
-+
-+exit:
-+	while (i--) {
-+		led_classdev_unregister(&tlc59116[i].led_cdev);
-+		cancel_work_sync(&tlc59116[i].work);
-+	}
-+
-+	devm_kfree(&client->dev, tlc59116);
-+	i2c_set_clientdata(client, NULL);
-+
-+	return err;
-+}
-+
-+static int tlc59116_remove(struct i2c_client *client)
-+{
-+	struct tlc59116_led *tlc59116 = i2c_get_clientdata(client);
-+	int i;
-+
-+	for (i = 0; i < tlc59116->chipdef->bits; i++) {
-+		led_classdev_unregister(&tlc59116[i].led_cdev);
-+		cancel_work_sync(&tlc59116[i].work);
-+	}
-+
-+	devm_kfree(&client->dev, tlc59116);
-+	i2c_set_clientdata(client, NULL);
-+
-+	return 0;
-+}
-+
-+static struct i2c_driver tlc59116_driver = {
-+	.driver = {
-+		.name	= "leds-tlc59116",
-+		.owner	= THIS_MODULE,
-+	},
-+	.probe	= tlc59116_probe,
-+	.remove	= tlc59116_remove,
-+	.id_table = tlc59116_id,
-+};
-+
-+module_i2c_driver(tlc59116_driver);
-+
-+MODULE_AUTHOR("Belkin Inc.");
-+MODULE_DESCRIPTION("TLC59116 LED driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch b/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch
deleted file mode 100644
index 09bb72c..0000000
--- a/target/linux/mvebu/patches-3.14/008-nand_warn_weak_ecc_strength.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 67a9ad9b8a6f6ea76ef8fc484ae49970d72d5534 Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Wed, 14 May 2014 14:58:06 -0300
-Subject: mtd: nand: Warn the user if the selected ECC strength is too weak
-
-This commit makes use of the chip->ecc_strength_ds and chip->ecc_step_ds which
-contain the datasheet minimum requested ECC strength to produce a noisy warning
-if the configured ECC strength is weaker.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -3682,6 +3682,39 @@ int nand_scan_ident(struct mtd_info *mtd
- }
- EXPORT_SYMBOL(nand_scan_ident);
- 
-+/*
-+ * Check if the chip configuration meet the datasheet requirements.
-+
-+ * If our configuration corrects A bits per B bytes and the minimum
-+ * required correction level is X bits per Y bytes, then we must ensure
-+ * both of the following are true:
-+ *
-+ * (1) A / B >= X / Y
-+ * (2) A >= X
-+ *
-+ * Requirement (1) ensures we can correct for the required bitflip density.
-+ * Requirement (2) ensures we can correct even when all bitflips are clumped
-+ * in the same sector.
-+ */
-+static bool nand_ecc_strength_good(struct mtd_info *mtd)
-+{
-+	struct nand_chip *chip = mtd->priv;
-+	struct nand_ecc_ctrl *ecc = &chip->ecc;
-+	int corr, ds_corr;
-+
-+	if (ecc->size == 0 || chip->ecc_step_ds == 0)
-+		/* Not enough information */
-+		return true;
-+
-+	/*
-+	 * We get the number of corrected bits per page to compare
-+	 * the correction density.
-+	 */
-+	corr = (mtd->writesize * ecc->strength) / ecc->size;
-+	ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
-+
-+	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
-+}
- 
- /**
-  * nand_scan_tail - [NAND Interface] Scan for the NAND device
-@@ -3891,6 +3924,9 @@ int nand_scan_tail(struct mtd_info *mtd)
- 		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
- 	mtd->oobavail = ecc->layout->oobavail;
- 
-+	/* ECC sanity check: warn noisily if it's too weak */
-+	WARN_ON(!nand_ecc_strength_good(mtd));
-+
- 	/*
- 	 * Set the number of read / write steps for one page depending on ECC
- 	 * mode.
diff --git a/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch b/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch
deleted file mode 100644
index dd2dc94..0000000
--- a/target/linux/mvebu/patches-3.14/009-add_of_mtd_ecc_helpers.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 6d9434ebb76157071164b32ad03fbed165c74382 Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Mon, 24 Feb 2014 19:24:48 -0300
-Subject: of_mtd: Add helpers to get ECC strength and ECC step size
-
-This commit adds simple helpers to obtain the devicetree properties
-that specify the ECC strength and ECC step size to use on a given
-NAND controller.
-
-Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/of/of_mtd.c
-+++ b/drivers/of/of_mtd.c
-@@ -50,6 +50,40 @@ int of_get_nand_ecc_mode(struct device_n
- EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
- 
- /**
-+ * of_get_nand_ecc_step_size - Get ECC step size associated to
-+ * the required ECC strength (see below).
-+ * @np:	Pointer to the given device_node
-+ *
-+ * return the ECC step size, or errno in error case.
-+ */
-+int of_get_nand_ecc_step_size(struct device_node *np)
-+{
-+	int ret;
-+	u32 val;
-+
-+	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
-+	return ret ? ret : val;
-+}
-+EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
-+
-+/**
-+ * of_get_nand_ecc_strength - Get required ECC strength over the
-+ * correspnding step size as defined by 'nand-ecc-size'
-+ * @np:	Pointer to the given device_node
-+ *
-+ * return the ECC strength, or errno in error case.
-+ */
-+int of_get_nand_ecc_strength(struct device_node *np)
-+{
-+	int ret;
-+	u32 val;
-+
-+	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
-+	return ret ? ret : val;
-+}
-+EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
-+
-+/**
-  * of_get_nand_bus_width - Get nand bus witdh for given device_node
-  * @np:	Pointer to the given device_node
-  *
---- a/include/linux/of_mtd.h
-+++ b/include/linux/of_mtd.h
-@@ -13,6 +13,8 @@
- 
- #include <linux/of.h>
- int of_get_nand_ecc_mode(struct device_node *np);
-+int of_get_nand_ecc_step_size(struct device_node *np);
-+int of_get_nand_ecc_strength(struct device_node *np);
- int of_get_nand_bus_width(struct device_node *np);
- bool of_get_nand_on_flash_bbt(struct device_node *np);
- 
-@@ -23,6 +25,16 @@ static inline int of_get_nand_ecc_mode(s
- 	return -ENOSYS;
- }
- 
-+static inline int of_get_nand_ecc_step_size(struct device_node *np)
-+{
-+	return -ENOSYS;
-+}
-+
-+static inline int of_get_nand_ecc_strength(struct device_node *np)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int of_get_nand_bus_width(struct device_node *np)
- {
- 	return -ENOSYS;
diff --git a/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch b/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch
deleted file mode 100644
index d02f5fe..0000000
--- a/target/linux/mvebu/patches-3.14/010-pxa3xx_nand_print_ECC_strength.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e634ce51baa52c131e4a35c01bba9e596a0eb86d Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Thu, 27 Feb 2014 14:13:26 -0300
-Subject: mtd: nand: pxa3xx: Print actual ECC strength in error message
-
-The actual ECC strength used to select the ECC scheme is 'ecc_strength'.
-Use it in the error message.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -1531,7 +1531,7 @@ KEEP_CONFIG:
- 	if (!ret) {
- 		dev_err(&info->pdev->dev,
- 			"ECC strength %d at page size %d is not supported\n",
--			chip->ecc_strength_ds, mtd->writesize);
-+			ecc_strength, mtd->writesize);
- 		return -ENODEV;
- 	}
- 
diff --git a/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch b/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch
deleted file mode 100644
index 06757e8..0000000
--- a/target/linux/mvebu/patches-3.14/011-pxa3xx_nand_clean_error_handling.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From eee0166d8ead9d719d794df3e66acd8f83630e05 Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Wed, 14 May 2014 14:58:07 -0300
-Subject: mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
-
-Let's make pxa_ecc_init() return a negative errno on error or zero
-if succesful, which is standard kernel practice. Also, report the
-selected ECC strength and step size, which is important information.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -1355,7 +1355,6 @@ static int pxa_ecc_init(struct pxa3xx_na
- 		ecc->mode = NAND_ECC_HW;
- 		ecc->size = 512;
- 		ecc->strength = 1;
--		return 1;
- 
- 	} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
- 		info->chunk_size = 512;
-@@ -1364,7 +1363,6 @@ static int pxa_ecc_init(struct pxa3xx_na
- 		ecc->mode = NAND_ECC_HW;
- 		ecc->size = 512;
- 		ecc->strength = 1;
--		return 1;
- 
- 	/*
- 	 * Required ECC: 4-bit correction per 512 bytes
-@@ -1379,7 +1377,6 @@ static int pxa_ecc_init(struct pxa3xx_na
- 		ecc->size = info->chunk_size;
- 		ecc->layout = &ecc_layout_2KB_bch4bit;
- 		ecc->strength = 16;
--		return 1;
- 
- 	} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
- 		info->ecc_bch = 1;
-@@ -1390,7 +1387,6 @@ static int pxa_ecc_init(struct pxa3xx_na
- 		ecc->size = info->chunk_size;
- 		ecc->layout = &ecc_layout_4KB_bch4bit;
- 		ecc->strength = 16;
--		return 1;
- 
- 	/*
- 	 * Required ECC: 8-bit correction per 512 bytes
-@@ -1405,8 +1401,15 @@ static int pxa_ecc_init(struct pxa3xx_na
- 		ecc->size = info->chunk_size;
- 		ecc->layout = &ecc_layout_4KB_bch8bit;
- 		ecc->strength = 16;
--		return 1;
-+	} else {
-+		dev_err(&info->pdev->dev,
-+			"ECC strength %d at page size %d is not supported\n",
-+			strength, page_size);
-+		return -ENODEV;
- 	}
-+
-+	dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
-+		 ecc->strength, ecc->size);
- 	return 0;
- }
- 
-@@ -1528,12 +1531,8 @@ KEEP_CONFIG:
- 
- 	ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
- 			   ecc_step, mtd->writesize);
--	if (!ret) {
--		dev_err(&info->pdev->dev,
--			"ECC strength %d at page size %d is not supported\n",
--			ecc_strength, mtd->writesize);
--		return -ENODEV;
--	}
-+	if (ret)
-+		return ret;
- 
- 	/* calculate addressing information */
- 	if (mtd->writesize >= 2048)
diff --git a/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch b/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch
deleted file mode 100644
index 8b5cc5b..0000000
--- a/target/linux/mvebu/patches-3.14/012-pxa3xx_nand_use_ecc_info_from_dt.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 5b3e507820c6e120bc2680c0d35f9d9d81fcb98d Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Wed, 14 May 2014 14:58:08 -0300
-Subject: mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
-
-This commit adds support for the user to specify the ECC strength
-and step size through the devicetree. We keep the previous behavior,
-when there is no DT parameter provided.
-
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -1520,8 +1520,13 @@ KEEP_CONFIG:
- 		}
- 	}
- 
--	ecc_strength = chip->ecc_strength_ds;
--	ecc_step = chip->ecc_step_ds;
-+	if (pdata->ecc_strength && pdata->ecc_step_size) {
-+		ecc_strength = pdata->ecc_strength;
-+		ecc_step = pdata->ecc_step_size;
-+	} else {
-+		ecc_strength = chip->ecc_strength_ds;
-+		ecc_step = chip->ecc_step_ds;
-+	}
- 
- 	/* Set default ECC strength requirements on non-ONFI devices */
- 	if (ecc_strength < 1 && ecc_step < 1) {
-@@ -1730,6 +1735,14 @@ static int pxa3xx_nand_probe_dt(struct p
- 	of_property_read_u32(np, "num-cs", &pdata->num_cs);
- 	pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
- 
-+	pdata->ecc_strength = of_get_nand_ecc_strength(np);
-+	if (pdata->ecc_strength < 0)
-+		pdata->ecc_strength = 0;
-+
-+	pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
-+	if (pdata->ecc_step_size < 0)
-+		pdata->ecc_step_size = 0;
-+
- 	pdev->dev.platform_data = pdata;
- 
- 	return 0;
---- a/include/linux/platform_data/mtd-nand-pxa3xx.h
-+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
-@@ -58,6 +58,9 @@ struct pxa3xx_nand_platform_data {
- 	/* use an flash-based bad block table */
- 	bool	flash_bbt;
- 
-+	/* requested ECC strength and ECC step size */
-+	int ecc_strength, ecc_step_size;
-+
- 	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
- 	unsigned int				nr_parts[NUM_CHIP_SELECT];
- 
diff --git a/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch b/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch
deleted file mode 100644
index 9572c78..0000000
--- a/target/linux/mvebu/patches-3.14/018-decouple_phy_id_and_address.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 9b744942290c168287013f0a19ff7392f65c8107 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Fri, 16 May 2014 16:14:03 +0200
-Subject: net: phy: decouple PHY id and PHY address in fixed PHY driver
-
-Until now, the fixed_phy_add() function was taking as argument
-'phy_id', which was used both as the PHY address on the fake fixed
-MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and
-MII_PHYSID2 registers. However, those two informations are completely
-unrelated.
-
-This patch decouples them. The PHY id of fixed PHYs is hardcoded to be
-0x0. Ideally, a really reserved value would be nicer, but there
-doesn't seem to be an easy of making sure a dummy value can be
-assigned to the Linux kernel for such usage.
-
-The PHY address remains passed by the caller of phy_fixed_add().
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-
---- a/drivers/net/phy/fixed.c
-+++ b/drivers/net/phy/fixed.c
-@@ -31,7 +31,7 @@ struct fixed_mdio_bus {
- };
- 
- struct fixed_phy {
--	int id;
-+	int addr;
- 	u16 regs[MII_REGS_NUM];
- 	struct phy_device *phydev;
- 	struct fixed_phy_status status;
-@@ -104,8 +104,8 @@ static int fixed_phy_update_regs(struct 
- 	if (fp->status.asym_pause)
- 		lpa |= LPA_PAUSE_ASYM;
- 
--	fp->regs[MII_PHYSID1] = fp->id >> 16;
--	fp->regs[MII_PHYSID2] = fp->id;
-+	fp->regs[MII_PHYSID1] = 0;
-+	fp->regs[MII_PHYSID2] = 0;
- 
- 	fp->regs[MII_BMSR] = bmsr;
- 	fp->regs[MII_BMCR] = bmcr;
-@@ -115,7 +115,7 @@ static int fixed_phy_update_regs(struct 
- 	return 0;
- }
- 
--static int fixed_mdio_read(struct mii_bus *bus, int phy_id, int reg_num)
-+static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
- {
- 	struct fixed_mdio_bus *fmb = bus->priv;
- 	struct fixed_phy *fp;
-@@ -124,7 +124,7 @@ static int fixed_mdio_read(struct mii_bu
- 		return -1;
- 
- 	list_for_each_entry(fp, &fmb->phys, node) {
--		if (fp->id == phy_id) {
-+		if (fp->addr == phy_addr) {
- 			/* Issue callback if user registered it. */
- 			if (fp->link_update) {
- 				fp->link_update(fp->phydev->attached_dev,
-@@ -138,7 +138,7 @@ static int fixed_mdio_read(struct mii_bu
- 	return 0xFFFF;
- }
- 
--static int fixed_mdio_write(struct mii_bus *bus, int phy_id, int reg_num,
-+static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
- 			    u16 val)
- {
- 	return 0;
-@@ -160,7 +160,7 @@ int fixed_phy_set_link_update(struct phy
- 		return -EINVAL;
- 
- 	list_for_each_entry(fp, &fmb->phys, node) {
--		if (fp->id == phydev->phy_id) {
-+		if (fp->addr == phydev->addr) {
- 			fp->link_update = link_update;
- 			fp->phydev = phydev;
- 			return 0;
-@@ -171,7 +171,7 @@ int fixed_phy_set_link_update(struct phy
- }
- EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
- 
--int fixed_phy_add(unsigned int irq, int phy_id,
-+int fixed_phy_add(unsigned int irq, int phy_addr,
- 		  struct fixed_phy_status *status)
- {
- 	int ret;
-@@ -184,9 +184,9 @@ int fixed_phy_add(unsigned int irq, int 
- 
- 	memset(fp->regs, 0xFF,  sizeof(fp->regs[0]) * MII_REGS_NUM);
- 
--	fmb->irqs[phy_id] = irq;
-+	fmb->irqs[phy_addr] = irq;
- 
--	fp->id = phy_id;
-+	fp->addr = phy_addr;
- 	fp->status = *status;
- 
- 	ret = fixed_phy_update_regs(fp);
diff --git a/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch b/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch
deleted file mode 100644
index ad37aab..0000000
--- a/target/linux/mvebu/patches-3.14/019-add_fixed_phy_register.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From a75951217472c522c324adb0a4de3ba69d656ef5 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Fri, 16 May 2014 16:14:04 +0200
-Subject: net: phy: extend fixed driver with fixed_phy_register()
-
-The existing fixed_phy_add() function has several drawbacks that
-prevents it from being used as is for OF-based declaration of fixed
-PHYs:
-
- * The address of the PHY on the fake bus needs to be passed, while a
-   dynamic allocation is desired.
-
- * Since the phy_device instantiation is post-poned until the next
-   mdiobus scan, there is no way to associate the fixed PHY with its
-   OF node, which later prevents of_phy_connect() from finding this
-   fixed PHY from a given OF node.
-
-To solve this, this commit introduces fixed_phy_register(), which will
-allocate an available PHY address, add the PHY using fixed_phy_add()
-and instantiate the phy_device structure associated with the provided
-OF node.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Acked-by: Grant Likely <grant.likely@linaro.org>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-
---- a/drivers/net/phy/fixed.c
-+++ b/drivers/net/phy/fixed.c
-@@ -21,6 +21,7 @@
- #include <linux/phy_fixed.h>
- #include <linux/err.h>
- #include <linux/slab.h>
-+#include <linux/of.h>
- 
- #define MII_REGS_NUM 29
- 
-@@ -203,6 +204,66 @@ err_regs:
- }
- EXPORT_SYMBOL_GPL(fixed_phy_add);
- 
-+void fixed_phy_del(int phy_addr)
-+{
-+	struct fixed_mdio_bus *fmb = &platform_fmb;
-+	struct fixed_phy *fp, *tmp;
-+
-+	list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
-+		if (fp->addr == phy_addr) {
-+			list_del(&fp->node);
-+			kfree(fp);
-+			return;
-+		}
-+	}
-+}
-+EXPORT_SYMBOL_GPL(fixed_phy_del);
-+
-+static int phy_fixed_addr;
-+static DEFINE_SPINLOCK(phy_fixed_addr_lock);
-+
-+int fixed_phy_register(unsigned int irq,
-+		       struct fixed_phy_status *status,
-+		       struct device_node *np)
-+{
-+	struct fixed_mdio_bus *fmb = &platform_fmb;
-+	struct phy_device *phy;
-+	int phy_addr;
-+	int ret;
-+
-+	/* Get the next available PHY address, up to PHY_MAX_ADDR */
-+	spin_lock(&phy_fixed_addr_lock);
-+	if (phy_fixed_addr == PHY_MAX_ADDR) {
-+		spin_unlock(&phy_fixed_addr_lock);
-+		return -ENOSPC;
-+	}
-+	phy_addr = phy_fixed_addr++;
-+	spin_unlock(&phy_fixed_addr_lock);
-+
-+	ret = fixed_phy_add(PHY_POLL, phy_addr, status);
-+	if (ret < 0)
-+		return ret;
-+
-+	phy = get_phy_device(fmb->mii_bus, phy_addr, false);
-+	if (!phy || IS_ERR(phy)) {
-+		fixed_phy_del(phy_addr);
-+		return -EINVAL;
-+	}
-+
-+	of_node_get(np);
-+	phy->dev.of_node = np;
-+
-+	ret = phy_device_register(phy);
-+	if (ret) {
-+		phy_device_free(phy);
-+		of_node_put(np);
-+		fixed_phy_del(phy_addr);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
- static int __init fixed_mdio_bus_init(void)
- {
- 	struct fixed_mdio_bus *fmb = &platform_fmb;
---- a/include/linux/phy_fixed.h
-+++ b/include/linux/phy_fixed.h
-@@ -9,15 +9,26 @@ struct fixed_phy_status {
- 	int asym_pause;
- };
- 
-+struct device_node;
-+
- #ifdef CONFIG_FIXED_PHY
- extern int fixed_phy_add(unsigned int irq, int phy_id,
- 			 struct fixed_phy_status *status);
-+extern int fixed_phy_register(unsigned int irq,
-+			      struct fixed_phy_status *status,
-+			      struct device_node *np);
- #else
- static inline int fixed_phy_add(unsigned int irq, int phy_id,
- 				struct fixed_phy_status *status)
- {
- 	return -ENODEV;
- }
-+static inline int fixed_phy_register(unsigned int irq,
-+				     struct fixed_phy_status *status,
-+				     struct device_node *np)
-+{
-+	return -ENODEV;
-+}
- #endif /* CONFIG_FIXED_PHY */
- 
- /*
diff --git a/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch b/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch
deleted file mode 100644
index d1acc65..0000000
--- a/target/linux/mvebu/patches-3.14/020-of_fixed_link_phy.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 3be2a49e5c08d268f8af0dd4fe89a24ea8cdc339 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Fri, 16 May 2014 16:14:05 +0200
-Subject: of: provide a binding for fixed link PHYs
-
-Some Ethernet MACs have a "fixed link", and are not connected to a
-normal MDIO-managed PHY device. For those situations, a Device Tree
-binding allows to describe a "fixed link" using a special PHY node.
-
-This patch adds:
-
- * A documentation for the fixed PHY Device Tree binding.
-
- * An of_phy_is_fixed_link() function that an Ethernet driver can call
-   on its PHY phandle to find out whether it's a fixed link PHY or
-   not. It should typically be used to know if
-   of_phy_register_fixed_link() should be called.
-
- * An of_phy_register_fixed_link() function that instantiates the
-   fixed PHY into the PHY subsystem, so that when the driver calls
-   of_phy_connect(), the PHY device associated to the OF node will be
-   found.
-
-These two additional functions also support the old fixed-link Device
-Tree binding used on PowerPC platforms, so that ultimately, the
-network device drivers for those platforms could be converted to use
-of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of
-of_phy_connect_fixed_link(), while keeping compatibility with their
-respective Device Tree bindings.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
-@@ -0,0 +1,30 @@
-+Fixed link Device Tree binding
-+------------------------------
-+
-+Some Ethernet MACs have a "fixed link", and are not connected to a
-+normal MDIO-managed PHY device. For those situations, a Device Tree
-+binding allows to describe a "fixed link".
-+
-+Such a fixed link situation is described by creating a 'fixed-link'
-+sub-node of the Ethernet MAC device node, with the following
-+properties:
-+
-+* 'speed' (integer, mandatory), to indicate the link speed. Accepted
-+  values are 10, 100 and 1000
-+* 'full-duplex' (boolean, optional), to indicate that full duplex is
-+  used. When absent, half duplex is assumed.
-+* 'pause' (boolean, optional), to indicate that pause should be
-+  enabled.
-+* 'asym-pause' (boolean, optional), to indicate that asym_pause should
-+  be enabled.
-+
-+Example:
-+
-+ethernet@0 {
-+	...
-+	fixed-link {
-+	      speed = <1000>;
-+	      full-duplex;
-+	};
-+	...
-+};
---- a/drivers/of/of_mdio.c
-+++ b/drivers/of/of_mdio.c
-@@ -14,6 +14,7 @@
- #include <linux/netdevice.h>
- #include <linux/err.h>
- #include <linux/phy.h>
-+#include <linux/phy_fixed.h>
- #include <linux/of.h>
- #include <linux/of_irq.h>
- #include <linux/of_mdio.h>
-@@ -280,3 +281,69 @@ struct phy_device *of_phy_attach(struct 
- 	return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy;
- }
- EXPORT_SYMBOL(of_phy_attach);
-+
-+#if defined(CONFIG_FIXED_PHY)
-+/*
-+ * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
-+ * support two DT bindings:
-+ * - the old DT binding, where 'fixed-link' was a property with 5
-+ *   cells encoding various informations about the fixed PHY
-+ * - the new DT binding, where 'fixed-link' is a sub-node of the
-+ *   Ethernet device.
-+ */
-+bool of_phy_is_fixed_link(struct device_node *np)
-+{
-+	struct device_node *dn;
-+	int len;
-+
-+	/* New binding */
-+	dn = of_get_child_by_name(np, "fixed-link");
-+	if (dn) {
-+		of_node_put(dn);
-+		return true;
-+	}
-+
-+	/* Old binding */
-+	if (of_get_property(np, "fixed-link", &len) &&
-+	    len == (5 * sizeof(__be32)))
-+		return true;
-+
-+	return false;
-+}
-+EXPORT_SYMBOL(of_phy_is_fixed_link);
-+
-+int of_phy_register_fixed_link(struct device_node *np)
-+{
-+	struct fixed_phy_status status = {};
-+	struct device_node *fixed_link_node;
-+	const __be32 *fixed_link_prop;
-+	int len;
-+
-+	/* New binding */
-+	fixed_link_node = of_get_child_by_name(np, "fixed-link");
-+	if (fixed_link_node) {
-+		status.link = 1;
-+		status.duplex = of_property_read_bool(np, "full-duplex");
-+		if (of_property_read_u32(fixed_link_node, "speed", &status.speed))
-+			return -EINVAL;
-+		status.pause = of_property_read_bool(np, "pause");
-+		status.asym_pause = of_property_read_bool(np, "asym-pause");
-+		of_node_put(fixed_link_node);
-+		return fixed_phy_register(PHY_POLL, &status, np);
-+	}
-+
-+	/* Old binding */
-+	fixed_link_prop = of_get_property(np, "fixed-link", &len);
-+	if (fixed_link_prop && len == (5 * sizeof(__be32))) {
-+		status.link = 1;
-+		status.duplex = be32_to_cpu(fixed_link_prop[1]);
-+		status.speed = be32_to_cpu(fixed_link_prop[2]);
-+		status.pause = be32_to_cpu(fixed_link_prop[3]);
-+		status.asym_pause = be32_to_cpu(fixed_link_prop[4]);
-+		return fixed_phy_register(PHY_POLL, &status, np);
-+	}
-+
-+	return -ENODEV;
-+}
-+EXPORT_SYMBOL(of_phy_register_fixed_link);
-+#endif
---- a/include/linux/of_mdio.h
-+++ b/include/linux/of_mdio.h
-@@ -67,4 +67,19 @@ static inline struct mii_bus *of_mdio_fi
- }
- #endif /* CONFIG_OF */
- 
-+#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY)
-+extern int of_phy_register_fixed_link(struct device_node *np);
-+extern bool of_phy_is_fixed_link(struct device_node *np);
-+#else
-+static inline int of_phy_register_fixed_link(struct device_node *np)
-+{
-+	return -ENOSYS;
-+}
-+static inline bool of_phy_is_fixed_link(struct device_node *np)
-+{
-+	return false;
-+}
-+#endif
-+
-+
- #endif /* __LINUX_OF_MDIO_H */
diff --git a/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch b/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch
deleted file mode 100644
index 5df6757..0000000
--- a/target/linux/mvebu/patches-3.14/021-mvneta_support_fixed_links.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 83895bedeee6fbf56d887af4280bf9edcc80da60 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Fri, 16 May 2014 16:14:06 +0200
-Subject: net: mvneta: add support for fixed links
-
-Following the introduction of of_phy_register_fixed_link(), this patch
-introduces fixed link support in the mvneta driver, for Marvell Armada
-370/XP SOCs.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2808,9 +2808,22 @@ static int mvneta_probe(struct platform_
- 
- 	phy_node = of_parse_phandle(dn, "phy", 0);
- 	if (!phy_node) {
--		dev_err(&pdev->dev, "no associated PHY\n");
--		err = -ENODEV;
--		goto err_free_irq;
-+		if (!of_phy_is_fixed_link(dn)) {
-+			dev_err(&pdev->dev, "no PHY specified\n");
-+			err = -ENODEV;
-+			goto err_free_irq;
-+		}
-+
-+		err = of_phy_register_fixed_link(dn);
-+		if (err < 0) {
-+			dev_err(&pdev->dev, "cannot register fixed PHY\n");
-+			goto err_free_irq;
-+		}
-+
-+		/* In the case of a fixed PHY, the DT node associated
-+		 * to the PHY is the Ethernet MAC DT node.
-+		 */
-+		phy_node = dn;
- 	}
- 
- 	phy_mode = of_get_phy_mode(dn);
diff --git a/target/linux/mvebu/patches-3.14/100-find_active_root.patch b/target/linux/mvebu/patches-3.14/100-find_active_root.patch
deleted file mode 100644
index 45fa575..0000000
--- a/target/linux/mvebu/patches-3.14/100-find_active_root.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-The bootloader passes the active rootfs in bootargs and also sets the
-rootfstype to jffs2 - which is clearly something we don't want.
-
-Rename both root= and rootfstype= variables to avoid issues and also
-use the former to dynamically rename the active partition to "ubi".
-
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -64,6 +64,18 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+static void mangle_bootargs(void *fdt, const char *fdt_cmdline)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock");
-+	strncpy(rootdev, "uboot_active_root=", 18);
-+
-+	rootfs = strstr(fdt_cmdline, "rootfstype");
-+	strncpy(rootfs, "origfstype", 10);
-+}
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -133,6 +145,9 @@ int atags_to_fdt(void *atag_list, void *
- 
- 	for_each_tag(atag, atag_list) {
- 		if (atag->hdr.tag == ATAG_CMDLINE) {
-+			/* Rename the original root= and rootfstype= options */
-+			mangle_bootargs(fdt,
-+					   atag->u.cmdline.cmdline);
- 			/* Append the ATAGS command line to the device tree
- 			 * command line.
- 			 * NB: This means that if the same parameter is set in
---- a/arch/arm/boot/compressed/string.c
-+++ b/arch/arm/boot/compressed/string.c
-@@ -111,6 +111,53 @@ char *strchr(const char *s, int c)
- 	return (char *)s;
- }
- 
-+/**
-+ * strncpy - Copy a length-limited, %NUL-terminated string
-+ * @dest: Where to copy the string to
-+ * @src: Where to copy the string from
-+ * @count: The maximum number of bytes to copy
-+ *
-+ * The result is not %NUL-terminated if the source exceeds
-+ * @count bytes.
-+ *
-+ * In the case where the length of @src is less than  that  of
-+ * count, the remainder of @dest will be padded with %NUL.
-+ *
-+ */
-+char *strncpy(char *dest, const char *src, size_t count)
-+{
-+	char *tmp = dest;
-+
-+	while (count) {
-+		if ((*tmp = *src) != 0)
-+			src++;
-+		tmp++;
-+		count--;
-+	}
-+	return dest;
-+}
-+
-+/**
-+ * strstr - Find the first substring in a %NUL terminated string
-+ * @s1: The string to be searched
-+ * @s2: The string to search for
-+ */
-+char *strstr(const char *s1, const char *s2)
-+{
-+	size_t l1, l2;
-+
-+	l2 = strlen(s2);
-+	if (!l2)
-+		return (char *)s1;
-+	l1 = strlen(s1);
-+	while (l1 >= l2) {
-+		l1--;
-+		if (!memcmp(s1, s2, l2))
-+			return (char *)s1;
-+		s1++;
-+	}
-+	return NULL;
-+}
- #undef memset
- 
- void *memset(void *s, int c, size_t count)
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int uboot_active_root;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- 				   struct mtd_partition **pparts,
- 				   struct mtd_part_parser_data *data)
- {
- 	struct device_node *node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i;
- 
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- 		(*pparts)[i].offset = of_read_number(reg, a_cells);
- 		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (uboot_active_root && (i == uboot_active_root)) {
-+				partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		(*pparts)[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &uboot_active_root);
-+
-+	if (!uboot_active_root)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("uboot_active_root=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-3.14/110-mvneta_fix_tso_and_chksum.patch b/target/linux/mvebu/patches-3.14/110-mvneta_fix_tso_and_chksum.patch
deleted file mode 100644
index 7115468..0000000
--- a/target/linux/mvebu/patches-3.14/110-mvneta_fix_tso_and_chksum.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -20,6 +20,7 @@
- #include <linux/mbus.h>
- #include <linux/module.h>
- #include <linux/interrupt.h>
-+#include <linux/if_vlan.h>
- #include <net/ip.h>
- #include <net/ipv6.h>
- #include <linux/io.h>
-@@ -1380,15 +1381,16 @@ static u32 mvneta_skb_tx_csum(struct mvn
- {
- 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
- 		int ip_hdr_len = 0;
-+		__be16 l3_proto = vlan_get_protocol(skb);
- 		u8 l4_proto;
- 
--		if (skb->protocol == htons(ETH_P_IP)) {
-+		if (l3_proto == htons(ETH_P_IP)) {
- 			struct iphdr *ip4h = ip_hdr(skb);
- 
- 			/* Calculate IPv4 checksum and L4 checksum */
- 			ip_hdr_len = ip4h->ihl;
- 			l4_proto = ip4h->protocol;
--		} else if (skb->protocol == htons(ETH_P_IPV6)) {
-+		} else if (l3_proto == htons(ETH_P_IPV6)) {
- 			struct ipv6hdr *ip6h = ipv6_hdr(skb);
- 
- 			/* Read l4_protocol from one of IPv6 extra headers */
-@@ -1399,7 +1401,7 @@ static u32 mvneta_skb_tx_csum(struct mvn
- 			return MVNETA_TX_L4_CSUM_NOT;
- 
- 		return mvneta_txq_desc_csum(skb_network_offset(skb),
--				skb->protocol, ip_hdr_len, l4_proto);
-+					l3_proto, ip_hdr_len, l4_proto);
- 	}
- 
- 	return MVNETA_TX_L4_CSUM_NOT;
diff --git a/target/linux/mvebu/patches-3.14/140-alias_mdio_node.patch b/target/linux/mvebu/patches-3.14/140-alias_mdio_node.patch
deleted file mode 100644
index 08a619b..0000000
--- a/target/linux/mvebu/patches-3.14/140-alias_mdio_node.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -221,7 +221,7 @@
- 				status = "disabled";
- 			};
- 
--			mdio {
-+			mdio: mdio {
- 				#address-cells = <1>;
- 				#size-cells = <0>;
- 				compatible = "marvell,orion-mdio";