sunxi: add kernel DT for NanoPi NEO Plus2 board

Linux Kernel upstream commit d73413058

Signed-off-by: Antony Antony <antony@phenome.org>

1 files changed, 224 insertions, 0 deletions

diff --git a/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch b/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch
new file mode 100644
index 0000000..535c8b6
--- /dev/null
+++ b/target/linux/sunxi/patches-4.14/061-arm-dts-sun50i-support-for-nanopi-neo-plus2-board.patch
@@ -0,0 +1,224 @@
+From d7341305863bcc054ee168bd77864100e0c3b144 Mon Sep 17 00:00:00 2001
+From: Antony Antony <antony@phenome.org>
+Date: Thu, 7 Sep 2017 18:42:22 +0200
+Subject: [PATCH] arm64: allwinner: h5: add NanoPi NEO Plus2 DT support
+
+Add initial DT for NanoPi NEO Plus2 by FriendlyARM
+- Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
+- 1 GB DDR3 RAM
+- 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
+- micro SD card slot
+- Gigabit Ethernet (external RTL8211E-VB-CG chip)
+- 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
+- 2x USB 2.0 host ports & 2x USB via headers
+
+Kernel 4.15 commit d7341305863b
+
+Signed-off-by: Antony Antony <antony@phenome.org>
+
+--- a/arch/arm64/boot/dts/allwinner/Makefile
++++ b/arch/arm64/boot/dts/allwinner/Makefile
+@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-or
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+ 
+ always		:= $(dtb-y)
+ subdir-y	:= $(dts-dirs)
+--- /dev/null
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+@@ -0,0 +1,193 @@
++/*
++ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
++ * Copyright (C) 2016 ARM Ltd.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun50i-h5.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++	model = "FriendlyARM NanoPi NEO Plus2";
++	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
++
++	aliases {
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		pwr {
++			label = "nanopi:green:pwr";
++			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
++		};
++
++		status {
++			label = "nanopi:red:status";
++			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		pinctrl-names = "default";
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <100000>;
++		enable-active-high;
++		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
++	};
++
++	reg_vcc3v3: vcc3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	vdd_cpux: gpio-regulator {
++		compatible = "regulator-gpio";
++		pinctrl-names = "default";
++		regulator-name = "vdd-cpux";
++		regulator-type = "voltage";
++		regulator-boot-on;
++		regulator-always-on;
++		regulator-min-microvolt = <1100000>;
++		regulator-max-microvolt = <1300000>;
++		regulator-ramp-delay = <50>; /* 4ms */
++		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
++		gpios-states = <0x1>;
++		states = <1100000 0x0
++			  1300000 0x1>;
++	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		pinctrl-names = "default";
++		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++		post-power-on-delay-ms = <200>;
++	};
++};
++
++&codec {
++	allwinner,audio-routing =
++		"Line Out", "LINEOUT",
++		"MIC1", "Mic",
++		"Mic",  "MBIAS";
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&ehci3 {
++	status = "okay";
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
++	vmmc-supply = <&reg_vcc3v3>;
++	bus-width = <4>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
++	status = "okay";
++};
++
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins_a>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	brcmf: wifi@1 {
++		reg = <1>;
++		compatible = "brcm,bcm4329-fmac";
++	};
++};
++
++&mmc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc2_8bit_pins>;
++	vmmc-supply = <&reg_vcc3v3>;
++	bus-width = <8>;
++	non-removable;
++	cap-mmc-hw-reset;
++	status = "okay";
++};
++
++&ohci0 {
++	status = "okay";
++};
++
++&ohci3 {
++	status = "okay";
++};
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_pins_a>;
++	status = "okay";
++};
++
++&usb_otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usbphy {
++	/* USB Type-A ports' VBUS is always on */
++	status = "okay";
++};