mpc85xx: drop 3.14 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44818

9 files changed, 0 insertions, 1203 deletions

diff --git a/target/linux/mpc85xx/config-3.14 b/target/linux/mpc85xx/config-3.14
deleted file mode 100644
index 62f35a9..0000000
--- a/target/linux/mpc85xx/config-3.14
+++ /dev/null
@@ -1,292 +0,0 @@
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BOOKE=y
-CONFIG_BOUNCE=y
-# CONFIG_BSC9131_RDB is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CPM2 is not set
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVKMEM=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_FSL_ULI1575=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IPIC is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGRATION=y
-# CONFIG_MII is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-CONFIG_MPC85xx_CDS=y
-# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC85xx_MDS=y
-CONFIG_MPC85xx_RDB=y
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_P1010_RDB=y
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDS is not set
-# CONFIG_P2041_RDB is not set
-# CONFIG_P3041_DS is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_P5020_DS is not set
-# CONFIG_P5040_DS is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DOORBELL=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_OF=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_QEMU_E500 is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC8548 is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOCK_DIAG=y
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_FSL_LIB=y
-CONFIG_SPI_MASTER=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TL_WDR4900_V1=y
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WORD_SIZE=32
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_MPIC_TIMER=y
-# CONFIG_C293_PCIE is not set
-# CONFIG_TWR_P102x is not set
-# CONFIG_CORENET_GENERIC is not set
diff --git a/target/linux/mpc85xx/patches-3.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-3.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
deleted file mode 100644
index a46e88b..0000000
--- a/target/linux/mpc85xx/patches-3.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -30,6 +30,7 @@ static struct of_device_id __initdata mp
- 	{ .compatible = "fsl,mpc8548-guts", },
- 	/* Probably unnecessary? */
- 	{ .compatible = "gpio-leds", },
-+	{ .compatible = "gpio-keys", },
- 	/* For all PCI controllers */
- 	{ .compatible = "fsl,mpc8540-pci", },
- 	{ .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-3.14/100-fix_mpc8568e_mds.patch b/target/linux/mpc85xx/patches-3.14/100-fix_mpc8568e_mds.patch
deleted file mode 100644
index 993b5f7..0000000
--- a/target/linux/mpc85xx/patches-3.14/100-fix_mpc8568e_mds.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
-@@ -134,17 +134,8 @@
- 
- 	};
- 
--	duart-sleep-nexus {
--		#address-cells = <1>;
--		#size-cells = <1>;
--		compatible = "simple-bus";
--		sleep = <&pmc 0x00000002>;
--		ranges;
--
- /include/ "pq3-duart-0.dtsi"
- 
--	};
--
- 	L2: l2-cache-controller@20000 {
- 		compatible = "fsl,mpc8568-l2-cache-controller";
- 		reg = <0x20000 0x1000>;
---- a/arch/powerpc/boot/dts/mpc8568mds.dts
-+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
-@@ -309,6 +309,9 @@
- 			gpios = <&bcsr5 3 0>;
- 		};
- 	};
-+	chosen {
-+		linux,stdout-path = "/soc8568@e0000000/serial@4500";
-+	};
- };
- 
- /include/ "fsl/mpc8568si-post.dtsi"
diff --git a/target/linux/mpc85xx/patches-3.14/110-fix_mpc8548_cds.patch b/target/linux/mpc85xx/patches-3.14/110-fix_mpc8548_cds.patch
deleted file mode 100644
index b6dbd0d..0000000
--- a/target/linux/mpc85xx/patches-3.14/110-fix_mpc8548_cds.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
-@@ -131,7 +131,24 @@
- 
- /include/ "pq3-i2c-0.dtsi"
- /include/ "pq3-i2c-1.dtsi"
--/include/ "pq3-duart-0.dtsi"
-+
-+	serial0: serial@4600 {
-+		cell-index = <1>;
-+		device_type = "serial";
-+		compatible = "fsl,ns16550", "ns16550";
-+		reg = <0x4600 0x100>;
-+		clock-frequency = <0>;
-+		interrupts = <42 2 0 0>;
-+	};
-+
-+	serial1: serial@4500 {
-+		cell-index = <0>;
-+		device_type = "serial";
-+		compatible = "fsl,ns16550", "ns16550";
-+		reg = <0x4500 0x100>;
-+		clock-frequency = <0>;
-+		interrupts = <42 2 0 0>;
-+	};
- 
- 	L2: l2-cache-controller@20000 {
- 		compatible = "fsl,mpc8548-l2-cache-controller";
---- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts
-+++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts
-@@ -75,6 +75,9 @@
- 			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
- 		};
- 	};
-+	chosen {
-+		linux,stdout-path = "/soc8548@e0000000/serial@4600";
-+	};
- };
- 
- /*
diff --git a/target/linux/mpc85xx/patches-3.14/120-mpc8548_cds_i8259_noirq_init.patch b/target/linux/mpc85xx/patches-3.14/120-mpc8548_cds_i8259_noirq_init.patch
deleted file mode 100644
index 81b9193..0000000
--- a/target/linux/mpc85xx/patches-3.14/120-mpc8548_cds_i8259_noirq_init.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
-+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
-@@ -247,15 +247,16 @@ static int mpc85xx_cds_8259_attach(void)
- 		return -ENODEV;
- 	}
- 
-+	i8259_init(cascade_node, 0);
-+	of_node_put(cascade_node);
-+
- 	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
- 	if (cascade_irq == NO_IRQ) {
--		printk(KERN_ERR "Failed to map cascade interrupt\n");
-+		of_node_put(cascade_node);
-+		printk(KERN_DEBUG "No interrupt for i8259 PIC\n");
- 		return -ENXIO;
- 	}
- 
--	i8259_init(cascade_node, 0);
--	of_node_put(cascade_node);
--
- 	/*
- 	 *  Hook the interrupt to make sure desc->action is never NULL.
- 	 *  This is required to ensure that the interrupt does not get
diff --git a/target/linux/mpc85xx/patches-3.14/130-mpc8548_cds_disable_i8259_irq.patch b/target/linux/mpc85xx/patches-3.14/130-mpc8548_cds_disable_i8259_irq.patch
deleted file mode 100644
index 7d9e63c..0000000
--- a/target/linux/mpc85xx/patches-3.14/130-mpc8548_cds_disable_i8259_irq.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/powerpc/boot/dts/mpc8548cds.dtsi
-+++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi
-@@ -289,8 +289,10 @@
- 				#address-cells = <0>;
- 				#interrupt-cells = <2>;
- 				compatible = "chrp,iic";
-+/*
- 				interrupts = <0 1 0 0>;
- 				interrupt-parent = <&mpic>;
-+*/
- 			};
- 
- 			rtc@70 {
diff --git a/target/linux/mpc85xx/patches-3.14/140-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-3.14/140-powerpc-85xx-tl-wdr4900-v1-support.patch
deleted file mode 100644
index fa64580..0000000
--- a/target/linux/mpc85xx/patches-3.14/140-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ /dev/null
@@ -1,616 +0,0 @@
-From 406d86e5990ac171f18ef6e2973672d8fbfe1556 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/powerpc/boot/Makefile                  |   3 +
- arch/powerpc/boot/cuboot-tl-wdr4900-v1.c    | 164 +++++++++++++++++++++
- arch/powerpc/boot/dts/tl-wdr4900-v1.dts     | 212 ++++++++++++++++++++++++++++
- arch/powerpc/boot/wrapper                   |   4 +
- arch/powerpc/platforms/85xx/Kconfig         |  11 ++
- arch/powerpc/platforms/85xx/Makefile        |   1 +
- arch/powerpc/platforms/85xx/tl_wdr4900_v1.c | 145 +++++++++++++++++++
- 7 files changed, 540 insertions(+)
- create mode 100644 arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
- create mode 100644 arch/powerpc/boot/dts/tl-wdr4900-v1.dts
- create mode 100644 arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -99,6 +99,8 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot
- src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
- src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
- src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c
-+
- 
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -279,6 +281,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
-+image-$(CONFIG_TL_WDR4900_V1)		+= cuImage.tl-wdr4900-v1
- 
- # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
- image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
---- /dev/null
-+++ b/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c
-@@ -0,0 +1,164 @@
-+/*
-+ * U-Boot compatibility wrapper for the TP-Link TL-WDR4900 v1 board
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *  cuboot-85xx.c
-+ *     Author: Scott Wood <scottwood@freescale.com>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ *  simpleboot.c
-+ *     Authors: Scott Wood <scottwood@freescale.com>
-+ *              Grant Likely <grant.likely@secretlab.ca>
-+ *     Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *     Copyright (c) 2008 Secret Lab Technologies Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+static unsigned long bus_freq;
-+static unsigned long int_freq;
-+static u64 mem_size;
-+static unsigned char enetaddr[6];
-+
-+static void process_boot_dtb(void *boot_dtb)
-+{
-+	const u32 *na, *ns, *reg, *val32;
-+	const char *path;
-+	u64 memsize64;
-+	int node, size, i;
-+
-+	/* Make sure FDT blob is sane */
-+	if (fdt_check_header(boot_dtb) != 0)
-+		fatal("Invalid device tree blob\n");
-+
-+	/* Find the #address-cells and #size-cells properties */
-+	node = fdt_path_offset(boot_dtb, "/");
-+	if (node < 0)
-+		fatal("Cannot find root node\n");
-+	na = fdt_getprop(boot_dtb, node, "#address-cells", &size);
-+	if (!na || (size != 4))
-+		fatal("Cannot find #address-cells property");
-+
-+	ns = fdt_getprop(boot_dtb, node, "#size-cells", &size);
-+	if (!ns || (size != 4))
-+		fatal("Cannot find #size-cells property");
-+
-+	/* Find the memory range */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "memory", sizeof("memory"));
-+	if (node < 0)
-+		fatal("Cannot find memory node\n");
-+	reg = fdt_getprop(boot_dtb, node, "reg", &size);
-+	if (size < (*na+*ns) * sizeof(u32))
-+		fatal("cannot get memory range\n");
-+
-+	/* Only interested in memory based at 0 */
-+	for (i = 0; i < *na; i++)
-+		if (*reg++ != 0)
-+			fatal("Memory range is not based at address 0\n");
-+
-+	/* get the memsize and trucate it to under 4G on 32 bit machines */
-+	memsize64 = 0;
-+	for (i = 0; i < *ns; i++)
-+		memsize64 = (memsize64 << 32) | *reg++;
-+	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
-+		memsize64 = 0xffffffff;
-+
-+	mem_size = memsize64;
-+
-+	/* get clock frequencies */
-+	node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type",
-+					     "cpu", sizeof("cpu"));
-+	if (!node)
-+		fatal("Cannot find cpu node\n");
-+
-+	val32 = fdt_getprop(boot_dtb, node, "clock-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get clock frequency");
-+
-+	int_freq = *val32;
-+
-+	val32 = fdt_getprop(boot_dtb, node, "bus-frequency", &size);
-+	if (!val32 || (size != 4))
-+		fatal("Cannot get bus frequency");
-+
-+	bus_freq = *val32;
-+
-+	path = fdt_get_alias(boot_dtb, "ethernet0");
-+	if (path) {
-+		const void *p;
-+
-+		node = fdt_path_offset(boot_dtb, path);
-+		if (node < 0)
-+			fatal("Cannot find ethernet0 node");
-+
-+		p = fdt_getprop(boot_dtb, node, "mac-address", &size);
-+		if (!p || (size < 6)) {
-+			printf("no mac-address property, finding local\n\r");
-+			p = fdt_getprop(boot_dtb, node, "local-mac-address", &size);
-+		}
-+
-+		if (!p || (size < 6))
-+			fatal("cannot get MAC addres");
-+
-+		memcpy(enetaddr, p, sizeof(enetaddr));
-+	}
-+}
-+
-+static void platform_fixups(void)
-+{
-+	void *soc;
-+
-+	dt_fixup_memory(0, mem_size);
-+
-+	dt_fixup_mac_address_by_alias("ethernet0", enetaddr);
-+	dt_fixup_cpu_clocks(int_freq, bus_freq / 8, bus_freq);
-+
-+	/* Unfortunately, the specific model number is encoded in the
-+	 * soc node name in existing dts files -- once that is fixed,
-+	 * this can do a simple path lookup.
-+	 */
-+	soc = find_node_by_devtype(NULL, "soc");
-+	if (soc) {
-+		void *serial = NULL;
-+
-+		setprop(soc, "bus-frequency", &bus_freq, sizeof(bus_freq));
-+
-+		while ((serial = find_node_by_devtype(serial, "serial"))) {
-+			if (get_parent(serial) != soc)
-+				continue;
-+
-+			setprop(serial, "clock-frequency", &bus_freq,
-+				sizeof(bus_freq));
-+		}
-+	}
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+                   unsigned long r6, unsigned long r7)
-+{
-+	mem_size = 64 * 1024 * 1024;
-+
-+	simple_alloc_init(_end, mem_size - (u32)_end - 1024*1024, 32, 64);
-+
-+	fdt_init(_dtb_start);
-+	serial_console_init();
-+
-+	printf("\n\r-- TL-WDR4900 v1 boot wrapper --\n\r");
-+
-+	process_boot_dtb((void *) r3);
-+
-+	platform_ops.fixups = platform_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
-@@ -0,0 +1,212 @@
-+/*
-+ * TP-Link TL-WDR4900 v1 Device Tree Source
-+ *
-+ * Copyright 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+/include/ "fsl/p1010si-pre.dtsi"
-+
-+/ {
-+	model = "TP-Link TL-WDR4900 v1";
-+	compatible = "tp-link,TL-WDR4900v1";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+/*
-+		linux,stdout-path = "/soc@ffe00000/serial@4500";
-+*/
-+	};
-+
-+	aliases {
-+		spi0 = &spi0;
-+	};
-+
-+	memory {
-+		device_type = "memory";
-+	};
-+
-+	soc: soc@ffe00000 {
-+		ranges = <0x0 0x0 0xffe00000 0x100000>;
-+
-+		spi0: spi@7000 {
-+			flash@0 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "spansion,s25fl129p1";
-+				reg = <0>;
-+				spi-max-frequency = <25000000>;
-+
-+				u-boot@0 {
-+					reg = <0x0 0x0050000>;
-+					label = "u-boot";
-+					read-only;
-+				};
-+
-+				dtb@50000 {
-+					reg = <0x00050000 0x00010000>;
-+					label = "dtb";
-+					read-only;
-+				};
-+
-+				kernel@60000 {
-+					reg = <0x00060000 0x002a0000>;
-+					label = "kernel";
-+				};
-+
-+				rootfs@300000 {
-+					reg = <0x00300000 0x00ce0000>;
-+					label = "rootfs";
-+				};
-+
-+				config@fe0000 {
-+					reg = <0x00fe0000 0x00010000>;
-+					label = "config";
-+					read-only;
-+				};
-+
-+				caldata@ff0000 {
-+					reg = <0x00ff0000 0x00010000>;
-+					label = "caldata";
-+					read-only;
-+				};
-+
-+				firmware@60000 {
-+					reg = <0x00060000 0x00f80000>;
-+					label = "firmware";
-+				};
-+			};
-+		};
-+
-+		gpio0: gpio-controller@f000 {
-+		};
-+
-+		usb@22000 {
-+			phy_type = "utmi";
-+			dr_mode = "host";
-+		};
-+
-+		mdio@24000 {
-+			phy0: ethernet-phy@0 {
-+				reg = <0x0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x07600000 /* PAD0_MODE */
-+					0x00008 0x00000000 /* PAD5_MODE */
-+					0x0000c 0x01000000 /* PAD6_MODE */
-+					0x00010 0x40000000 /* POWER_ON_STRIP */
-+					0x00050 0xcf35cf35 /* LED_CTRL0 */
-+					0x00054 0xcf35cf35 /* LED_CTRL1 */
-+					0x00058 0xcf35cf35 /* LED_CTRL2 */
-+					0x0005c 0x03ffff00 /* LED_CTRL3 */
-+					0x0007c 0x0000007e /* PORT0_STATUS */
-+				>;
-+			};
-+		};
-+
-+		mdio@25000 {
-+			status = "disabled";
-+		};
-+
-+		mdio@26000 {
-+			status = "disabled";
-+		};
-+
-+		enet0: ethernet@b0000 {
-+			phy-handle = <&phy0>;
-+			phy-connection-type = "rgmii-id";
-+		};
-+
-+		enet1: ethernet@b1000 {
-+			status = "disabled";
-+		};
-+
-+		enet2: ethernet@b2000 {
-+			status = "disabled";
-+		};
-+
-+		sdhc@2e000 {
-+			status = "disabled";
-+		};
-+
-+		serial1: serial@4600 {
-+			status = "disabled";
-+		};
-+
-+		can0: can@1c000 {
-+			status = "disabled";
-+		};
-+
-+		can1: can@1d000 {
-+			status = "disabled";
-+		};
-+	};
-+
-+	pci0: pcie@ffe09000 {
-+		reg = <0 0xffe09000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0xa0000000
-+				  0x2000000 0x0 0xa0000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	pci1: pcie@ffe0a000 {
-+		reg = <0 0xffe0a000 0 0x1000>;
-+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-+		pcie@0 {
-+			ranges = <0x2000000 0x0 0x80000000
-+				  0x2000000 0x0 0x80000000
-+				  0x0 0x20000000
-+
-+				  0x1000000 0x0 0x0
-+				  0x1000000 0x0 0x0
-+				  0x0 0x100000>;
-+		};
-+	};
-+
-+	ifc: ifc@ffe1e000 {
-+		status = "disabled";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		system {
-+			gpios = <&gpio0 2 1>; /* active low */
-+			label = "tp-link:blue:system";
-+		};
-+
-+		usb1 {
-+			gpios = <&gpio0 3 1>; /* active low */
-+			label = "tp-link:green:usb1";
-+		};
-+
-+		usb2 {
-+			gpios = <&gpio0 4 1>; /* active low */
-+			label = "tp-link:green:usb2";
-+		};
-+	};
-+
-+	buttons {
-+		compatible = "gpio-keys";
-+
-+		reset {
-+			label = "Reset button";
-+			gpios = <&gpio0 5 1>; /* active low */
-+			linux,code = <0x198>; /* KEY_RESTART */
-+		};
-+	};
-+};
-+
-+/include/ "fsl/p1010si-post.dtsi"
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -205,6 +205,10 @@ cuboot*)
-     *-mpc85*|*-tqm85*|*-sbc85*)
-         platformo=$object/cuboot-85xx.o
-         ;;
-+    *-tl-wdr4900-v1)
-+        platformo=$object/cuboot-tl-wdr4900-v1.o
-+	link_address='0x1000000'
-+        ;;
-     *-amigaone)
-         link_address='0x800000'
-         ;;
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -159,6 +159,17 @@ config STX_GP3
- 	select CPM2
- 	select DEFAULT_UIMAGE
- 
-+config TL_WDR4900_V1
-+	bool "TP-Link TL-WDR4900 v1"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+	  This board is a Concurrent Dual-Band wireless router with a
-+	  Freescale P1014 SoC.
-+
- config TQM8540
- 	bool "TQ Components TQM8540"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548)     += sbc8548.o
- obj-$(CONFIG_PPA8548)     += ppa8548.o
- obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
---- /dev/null
-+++ b/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c
-@@ -0,0 +1,145 @@
-+/*
-+ * TL-WDR4900 v1 board setup
-+ *
-+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Based on:
-+ *   p1010rdb.c:
-+ *      P1010RDB Board Setup
-+ *      Copyright 2011 Freescale Semiconductor Inc.
-+ *
-+ * This program is free software; you can redistribute  it and/or modify it
-+ * under  the terms of  the GNU General  Public License as published by the
-+ * Free Software Foundation;  either version 2 of the  License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/leds.h>
-+
-+#include <asm/time.h>
-+#include <asm/machdep.h>
-+#include <asm/pci-bridge.h>
-+#include <mm/mmu_decl.h>
-+#include <asm/prom.h>
-+#include <asm/udbg.h>
-+#include <asm/mpic.h>
-+
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+
-+#include "mpc85xx.h"
-+
-+void __init tl_wdr4900_v1_pic_init(void)
-+{
-+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
-+	  MPIC_SINGLE_DEST_CPU,
-+	  0, 256, " OpenPIC  ");
-+
-+	BUG_ON(mpic == NULL);
-+
-+	mpic_init(mpic);
-+}
-+
-+#ifdef CONFIG_PCI
-+static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = {
-+	{
-+		.name		= "tp-link:blue:wps",
-+		.gpio		= 1,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac0.eeprom",
-+	.leds = tl_wdr4900_v1_wmac_leds_gpio,
-+	.num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio),
-+};
-+
-+static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = {
-+	.led_pin = 0,
-+	.eeprom_name = "pci_wmac1.eeprom",
-+};
-+
-+static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev)
-+{
-+	if (!machine_is(tl_wdr4900_v1))
-+		return;
-+
-+	if (dev->bus->number == 1 &&
-+	    PCI_SLOT(dev->devfn) == 0) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data;
-+		return;
-+	}
-+
-+	if (dev->bus->number == 3 &&
-+	    PCI_SLOT(dev->devfn) == 0 &&
-+	    dev->device == 0xabcd) {
-+		dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data;
-+
-+		/*
-+		 * The PCI header of the AR9381 chip is not programmed
-+		 * correctly by the bootloader and the device uses wrong
-+		 * data due to that. Replace the broken values with the
-+		 * correct ones.
-+		 */
-+		dev->device = 0x30;
-+		dev->class = 0x028000;
-+
-+		pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev));
-+	}
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
-+			tl_wdr4900_v1_pci_wmac_fixup);
-+#endif /* CONFIG_PCI */
-+
-+/*
-+ * Setup the architecture
-+ */
-+static void __init tl_wdr4900_v1_setup_arch(void)
-+{
-+	if (ppc_md.progress)
-+		ppc_md.progress("tl_wdr4900_v1_setup_arch()", 0);
-+
-+	fsl_pci_assign_primary();
-+
-+	printk(KERN_INFO "TL-WDR4900 v1 board from TP-Link\n");
-+}
-+
-+machine_arch_initcall(tl_wdr4900_v1, mpc85xx_common_publish_devices);
-+machine_arch_initcall(tl_wdr4900_v1, swiotlb_setup_bus_notifier);
-+
-+/*
-+ * Called very early, device-tree isn't unflattened
-+ */
-+static int __init tl_wdr4900_v1_probe(void)
-+{
-+	unsigned long root = of_get_flat_dt_root();
-+
-+	if (of_flat_dt_is_compatible(root, "tp-link,TL-WDR4900v1"))
-+		return 1;
-+
-+	return 0;
-+}
-+
-+define_machine(tl_wdr4900_v1) {
-+	.name			= "Freescale P1014",
-+	.probe			= tl_wdr4900_v1_probe,
-+	.setup_arch		= tl_wdr4900_v1_setup_arch,
-+	.init_IRQ		= tl_wdr4900_v1_pic_init,
-+#ifdef CONFIG_PCI
-+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-+#endif
-+	.get_irq		= mpic_get_irq,
-+	.restart		= fsl_rstcr_restart,
-+	.calibrate_decr		= generic_calibrate_decr,
-+	.progress		= udbg_progress,
-+};
diff --git a/target/linux/mpc85xx/patches-3.14/150-powerpc-85xx-fix-etsec-ranges.patch b/target/linux/mpc85xx/patches-3.14/150-powerpc-85xx-fix-etsec-ranges.patch
deleted file mode 100644
index 1b93356..0000000
--- a/target/linux/mpc85xx/patches-3.14/150-powerpc-85xx-fix-etsec-ranges.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
-@@ -50,6 +50,7 @@ ethernet@b0000 {
- 	fsl,num_tx_queues = <0x8>;
- 	fsl,magic-packet;
- 	local-mac-address = [ 00 00 00 00 00 00 ];
-+	ranges;
- 
- 	queue-group@b0000 {
- 		#address-cells = <1>;
---- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
-@@ -50,6 +50,7 @@ ethernet@b1000 {
- 	fsl,num_tx_queues = <0x8>;
- 	fsl,magic-packet;
- 	local-mac-address = [ 00 00 00 00 00 00 ];
-+	ranges;
- 
- 	queue-group@b1000 {
- 		#address-cells = <1>;
---- a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
-+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
-@@ -49,6 +49,7 @@ ethernet@b2000 {
- 	fsl,num_tx_queues = <0x8>;
- 	fsl,magic-packet;
- 	local-mac-address = [ 00 00 00 00 00 00 ];
-+	ranges;
- 
- 	queue-group@b2000 {
- 		#address-cells = <1>;
diff --git a/target/linux/mpc85xx/patches-3.14/210-spi-fsl-espi-preallocate-local-buffer.patch b/target/linux/mpc85xx/patches-3.14/210-spi-fsl-espi-preallocate-local-buffer.patch
deleted file mode 100644
index 2cbb693..0000000
--- a/target/linux/mpc85xx/patches-3.14/210-spi-fsl-espi-preallocate-local-buffer.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: spi-fsl-espi: avoid frequent high order allocations
-
-The driver allocates 64KiB of memory fro a local buffer before
-each transfer and releases that afterwards. When the memory is
-fragmented this allocation often fails and causes a warning like
-this:
-
-  kworker/u2:2: page allocation failure: order:4, mode:0x10c0d0
-  CPU: 0 PID: 7011 Comm: kworker/u2:2 Not tainted 3.10.24 #1
-  Workqueue: ffe07000.spi mpc8xxx_spi_work
-  Call Trace:
-  [c1c6dcf0] [c0006914] show_stack+0x50/0x170 (unreliable)
-  [c1c6dd30] [c0259858] dump_stack+0x24/0x34
-  [c1c6dd40] [c00672e8] warn_alloc_failed+0x120/0x13c
-  [c1c6dd90] [c0069920] __alloc_pages_nodemask+0x574/0x5c8
-  [c1c6de20] [c0069990] __get_free_pages+0x1c/0x4c
-  [c1c6de30] [c0185174] fsl_espi_do_one_msg+0x128/0x2a0
-  [c1c6de90] [c0184290] mpc8xxx_spi_work+0x50/0x7c
-  [c1c6dea0] [c0037af8] process_one_work+0x208/0x30c
-  [c1c6dec0] [c00387a0] worker_thread+0x20c/0x308
-  [c1c6def0] [c003de60] kthread+0xa4/0xa8
-  [c1c6df40] [c000c4bc] ret_from_kernel_thread+0x5c/0x64
-
-  m25p80 spi0.0: error -12 reading SR
-  end_request: I/O error, dev mtdblock3, sector 680
-  SQUASHFS error: squashfs_read_data failed to read block 0x54a4a
-  SQUASHFS error: Unable to read data cache entry [54a4a]
-
-Preallocate the buffer from the probe routine to avoid
-this.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/spi/spi-fsl-espi.c | 34 ++++++++++++++++------------------
- drivers/spi/spi-fsl-lib.h  |  1 +
- 2 files changed, 17 insertions(+), 18 deletions(-)
-
---- a/drivers/spi/spi-fsl-espi.c
-+++ b/drivers/spi/spi-fsl-espi.c
-@@ -334,17 +334,13 @@ static void fsl_espi_do_trans(struct spi
- static void fsl_espi_cmd_trans(struct spi_message *m,
- 				struct fsl_espi_transfer *trans, u8 *rx_buff)
- {
-+	struct spi_device *spi = m->spi;
-+	struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
- 	struct spi_transfer *t;
--	u8 *local_buf;
-+	u8 *local_buf = mspi->local_buf;
- 	int i = 0;
- 	struct fsl_espi_transfer *espi_trans = trans;
- 
--	local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
--	if (!local_buf) {
--		espi_trans->status = -ENOMEM;
--		return;
--	}
--
- 	list_for_each_entry(t, &m->transfers, transfer_list) {
- 		if (t->tx_buf) {
- 			memcpy(local_buf + i, t->tx_buf, t->len);
-@@ -357,28 +353,23 @@ static void fsl_espi_cmd_trans(struct sp
- 	fsl_espi_do_trans(m, espi_trans);
- 
- 	espi_trans->actual_length = espi_trans->len;
--	kfree(local_buf);
- }
- 
- static void fsl_espi_rw_trans(struct spi_message *m,
- 				struct fsl_espi_transfer *trans, u8 *rx_buff)
- {
-+	struct spi_device *spi = m->spi;
-+	struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
- 	struct fsl_espi_transfer *espi_trans = trans;
- 	unsigned int n_tx = espi_trans->n_tx;
- 	unsigned int n_rx = espi_trans->n_rx;
- 	struct spi_transfer *t;
--	u8 *local_buf;
-+	u8 *local_buf = mspi->local_buf;
- 	u8 *rx_buf = rx_buff;
- 	unsigned int trans_len;
- 	unsigned int addr;
- 	int i, pos, loop;
- 
--	local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
--	if (!local_buf) {
--		espi_trans->status = -ENOMEM;
--		return;
--	}
--
- 	for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) {
- 		trans_len = n_rx - pos;
- 		if (trans_len > SPCOM_TRANLEN_MAX - n_tx)
-@@ -412,8 +403,6 @@ static void fsl_espi_rw_trans(struct spi
- 		else
- 			espi_trans->actual_length += espi_trans->len;
- 	}
--
--	kfree(local_buf);
- }
- 
- static void fsl_espi_do_one_msg(struct spi_message *m)
-@@ -581,6 +570,7 @@ static irqreturn_t fsl_espi_irq(s32 irq,
- static void fsl_espi_remove(struct mpc8xxx_spi *mspi)
- {
- 	iounmap(mspi->reg_base);
-+	kfree(mspi->local_buf);
- }
- 
- static struct spi_master * fsl_espi_probe(struct device *dev,
-@@ -612,10 +602,16 @@ static struct spi_master * fsl_espi_prob
- 	mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg;
- 	mpc8xxx_spi->spi_remove = fsl_espi_remove;
- 
-+	mpc8xxx_spi->local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
-+	if (!mpc8xxx_spi->local_buf) {
-+		ret = -ENOMEM;
-+		goto err_probe;
-+	}
-+
- 	mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem));
- 	if (!mpc8xxx_spi->reg_base) {
- 		ret = -ENOMEM;
--		goto err_probe;
-+		goto free_buf;
- 	}
- 
- 	reg_base = mpc8xxx_spi->reg_base;
-@@ -658,6 +654,8 @@ unreg_master:
- 	free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
- free_irq:
- 	iounmap(mpc8xxx_spi->reg_base);
-+free_buf:
-+	kfree(mpc8xxx_spi->local_buf);
- err_probe:
- 	spi_master_put(master);
- err:
---- a/drivers/spi/spi-fsl-lib.h
-+++ b/drivers/spi/spi-fsl-lib.h
-@@ -30,6 +30,7 @@ struct mpc8xxx_spi {
- 	void *rx;
- #ifdef CONFIG_SPI_FSL_ESPI
- 	int len;
-+	u8 *local_buf;
- #endif
- 
- 	int subblock;