summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2016-12-21 09:59:29 +0100
committerMathias Kresin <dev@kresin.me>2016-12-24 10:03:38 +0100
commit7dd42d610dcd6f9271d5d44edff52caf633b8abf (patch)
treeef0d8d65ce7e76841e05d28008fb50641cf373a2 /target
parent9aa420b00e816ba7fc98049aa4961e392ab65d3a (diff)
downloadmtk-20170518-7dd42d610dcd6f9271d5d44edff52caf633b8abf.zip
mtk-20170518-7dd42d610dcd6f9271d5d44edff52caf633b8abf.tar.gz
mtk-20170518-7dd42d610dcd6f9271d5d44edff52caf633b8abf.tar.bz2
lantiq: add FRITZ7360SL phy reset gpios
Due to a hardware bug of Atheros 8030 phys, the driver need to reset the phys on link state change. Use the correct compatible string for the at903x phys connected to switch port 0 and 1. Fix the pinmux of the gpio lines connected to the reset pin of the phys and define the reset-pins to let the driver do the fixups. Fixes FS#343 Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
-rw-r--r--target/linux/lantiq/dts/FRITZ7360SL.dts10
1 files changed, 5 insertions, 5 deletions
diff --git a/target/linux/lantiq/dts/FRITZ7360SL.dts b/target/linux/lantiq/dts/FRITZ7360SL.dts
index b3cb1c5..0caea7f 100644
--- a/target/linux/lantiq/dts/FRITZ7360SL.dts
+++ b/target/linux/lantiq/dts/FRITZ7360SL.dts
@@ -70,7 +70,7 @@
};
phy-rst {
lantiq,pins = "io37", "io44";
- lantiq,pull = <2>;
+ lantiq,pull = <0>;
lantiq,open-drain;
lantiq,output = <1>;
};
@@ -160,14 +160,12 @@
reg = <0>;
phy-mode = "rmii";
phy-handle = <&phy0>;
- // gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rmii";
phy-handle = <&phy1>;
- // gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
@@ -189,11 +187,13 @@
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x00>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
+ reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
phy1: ethernet-phy@1 {
reg = <0x01>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;