summaryrefslogtreecommitdiff
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2014-08-25 06:35:42 +0000
committerJohn Crispin <john@openwrt.org>2014-08-25 06:35:42 +0000
commita3fd3dc7968629334b8f8ec76e3e020ef18cad85 (patch)
treee848e62ca253d8d828892ff3feeedca51864654c /target
parent75cbca0a4088dd6bffabe7657e7292e05f2fcd42 (diff)
downloadmtk-20170518-a3fd3dc7968629334b8f8ec76e3e020ef18cad85.zip
mtk-20170518-a3fd3dc7968629334b8f8ec76e3e020ef18cad85.tar.gz
mtk-20170518-a3fd3dc7968629334b8f8ec76e3e020ef18cad85.tar.bz2
ramips: second spi device on rt5350
This is based on Jon Smirl's patch with the following changes: - Set CS polarity as low by default. - Add support for changing CS polarity. - Add support for changing LSB/MSB. - Add support for changing SPI mode. - Fix indentations. I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42276
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/dts/rt5350.dtsi4
-rw-r--r--target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch368
-rw-r--r--target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch368
3 files changed, 738 insertions, 2 deletions
diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi
index 722540b..8ba20bb 100644
--- a/target/linux/ramips/dts/rt5350.dtsi
+++ b/target/linux/ramips/dts/rt5350.dtsi
@@ -151,7 +151,7 @@
};
spi@b00 {
- compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
+ compatible = "ralink,rt5350-spi";
reg = <0xb00 0x100>;
resets = <&rstctrl 18>;
@@ -161,7 +161,7 @@
#size-cells = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>;
+ pinctrl-0 = <&spi_pins &spi_cs1>;
status = "disabled";
};
diff --git a/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch
new file mode 100644
index 0000000..64c4150
--- /dev/null
+++ b/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch
@@ -0,0 +1,368 @@
+--- a/drivers/spi/spi-rt2880.c
++++ b/drivers/spi/spi-rt2880.c
+@@ -29,16 +29,17 @@
+ #define SPI_BPW_MASK(bits) BIT((bits) - 1)
+
+ #define DRIVER_NAME "spi-rt2880"
+-/* only one slave is supported*/
+-#define RALINK_NUM_CHIPSELECTS 1
+ /* in usec */
+ #define RALINK_SPI_WAIT_MAX_LOOP 2000
+
+-#define RAMIPS_SPI_STAT 0x00
+-#define RAMIPS_SPI_CFG 0x10
+-#define RAMIPS_SPI_CTL 0x14
+-#define RAMIPS_SPI_DATA 0x20
+-#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++
++#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_ARBITER 0xF0
+
+ /* SPISTAT register bit field */
+ #define SPISTAT_BUSY BIT(0)
+@@ -68,6 +69,10 @@
+ /* SPIFIFOSTAT register bit field */
+ #define SPIFIFOSTAT_TXFULL BIT(17)
+
++#define SPICTL_ARB_EN BIT(31)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
+ #define MT7621_SPI_TRANS 0x00
+ #define SPITRANS_BUSY BIT(16)
+ #define MT7621_SPI_OPCODE 0x04
+@@ -78,13 +83,16 @@
+ #define MT7621_SPI_MASTER 0x28
+ #define MT7621_SPI_SPACE 0x3c
+
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
++
+ struct rt2880_spi;
+
+ struct rt2880_spi_ops {
+ void (*init_hw)(struct rt2880_spi *rs);
+- void (*set_cs)(struct rt2880_spi *rs, int enable);
++ void (*set_cs)(struct spi_device *spi, int enable);
+ int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
+ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
++ int num_cs;
+ };
+
+ struct rt2880_spi {
+@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st
+
+ static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+ {
++ int cs = spi->chip_select;
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 rate;
+ u32 prescale;
+@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc
+ prescale = ilog2(rate / 2);
+ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
+
+- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
+ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
+- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
+ rs->speed = speed;
+ return 0;
+ }
+@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev
+ {
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ unsigned int speed = spi->max_speed_hz;
+- int rc;
++ int rc, cs = spi->chip_select;
++ u32 reg;
+
+ if ((t != NULL) && t->speed_hz)
+ speed = t->speed_hz;
+@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev
+ return rc;
+ }
+
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
++
++ reg = (reg & ~SPICFG_MSBFIRST);
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING));
++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
++
++ reg = SPICTL_ARB_EN;
++ if (spi->mode & SPI_CS_HIGH) {
++ switch(cs) {
++ case 0:
++ reg |= SPI0_POR;
++ break;
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ }
++ }
++
++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg);
++
+ return 0;
+ }
+
+-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
++static void rt2880_spi_set_cs(struct spi_device *spi, int enable)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
++
+ if (enable)
+- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
+ else
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
+ }
+
+-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
++static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
+
+ if (enable)
+@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2
+ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
+ }
+
+-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
++static inline int rt2880_spi_wait_till_ready(struct spi_device *spi)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+ u32 status;
+
+- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs));
+ if ((status & SPISTAT_BUSY) == 0)
+ return 0;
+
+@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r
+ return -ETIMEDOUT;
+ }
+
+-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
++static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+@@ -268,6 +323,7 @@ static unsigned int
+ rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
+ {
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
+ unsigned count = 0;
+ u8 *rx = xfer->rx_buf;
+ const u8 *tx = xfer->tx_buf;
+@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device
+
+ if (tx) {
+ for (count = 0; count < xfer->len; count++) {
+- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
+- err = rt2880_spi_wait_till_ready(rs);
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR);
++ err = rt2880_spi_wait_till_ready(spi);
+ if (err) {
+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
+ goto out;
+@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device
+
+ if (rx) {
+ for (count = 0; count < xfer->len; count++) {
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
+- err = rt2880_spi_wait_till_ready(rs);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD);
++ err = rt2880_spi_wait_till_ready(spi);
+ if (err) {
+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
+ goto out;
+ }
+- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs));
+ }
+ }
+
+@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device
+ trans |= SPI_CTL_START;
+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
+
+- mt7621_spi_wait_till_ready(rs);
++ mt7621_spi_wait_till_ready(spi);
+
+ if (rx) {
+ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
+@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa
+ }
+
+ if (!cs_active) {
+- rs->ops->set_cs(rs, 1);
++ rs->ops->set_cs(spi, 1);
+ cs_active = 1;
+ }
+
+@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa
+ udelay(t->delay_usecs);
+
+ if (t->cs_change) {
+- rs->ops->set_cs(rs, 0);
++ rs->ops->set_cs(spi, 0);
+ cs_active = 0;
+ }
+ }
+
+ msg_done:
+ if (cs_active)
+- rs->ops->set_cs(rs, 0);
++ rs->ops->set_cs(spi, 0);
+
+ m->status = status;
+ spi_finalize_current_message(master);
+@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+
+ if ((spi->max_speed_hz == 0) ||
+- (spi->max_speed_hz > (rs->sys_freq / 2)))
++ (spi->max_speed_hz > (rs->sys_freq / 2)))
+ spi->max_speed_hz = (rs->sys_freq / 2);
+
+ if (spi->max_speed_hz < (rs->sys_freq / 128)) {
+@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d
+
+ static void rt2880_spi_reset(struct rt2880_spi *rs)
+ {
+- rt2880_spi_write(rs, RAMIPS_SPI_CFG,
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0),
+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
+- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA);
++}
++
++static void rt5350_spi_reset(struct rt2880_spi *rs)
++{
++ int cs;
++
++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER,
++ SPICTL_ARB_EN);
++
++ for (cs = 0; cs < rs->ops->num_cs; cs++) {
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs),
++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA);
++ }
+ }
+
+ static void mt7621_spi_reset(struct rt2880_spi *rs)
+@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] =
+ .set_cs = rt2880_spi_set_cs,
+ .baudrate_set = rt2880_spi_baudrate_set,
+ .write_read = rt2880_spi_write_read,
++ .num_cs = 1,
++ }, {
++ .init_hw = rt5350_spi_reset,
++ .set_cs = rt2880_spi_set_cs,
++ .baudrate_set = rt2880_spi_baudrate_set,
++ .write_read = rt2880_spi_write_read,
++ .num_cs = 2,
+ }, {
+ .init_hw = mt7621_spi_reset,
+ .set_cs = mt7621_spi_set_cs,
+ .baudrate_set = mt7621_spi_baudrate_set,
+ .write_read = mt7621_spi_write_read,
++ .num_cs = 1,
+ },
+ };
+
+ static const struct of_device_id rt2880_spi_match[] = {
+ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
+- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
++ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]},
++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+
+ static int rt2880_spi_probe(struct platform_device *pdev)
+ {
+- const struct of_device_id *match;
++ const struct of_device_id *match;
+ struct spi_master *master;
+ struct rt2880_spi *rs;
+ unsigned long flags;
+@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf
+ struct resource *r;
+ int status = 0;
+ struct clk *clk;
++ struct rt2880_spi_ops *ops;
+
+- match = of_match_device(rt2880_spi_match, &pdev->dev);
++ match = of_match_device(rt2880_spi_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
++ ops = (struct rt2880_spi_ops *)match->data;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, r);
+@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf
+ return -ENOMEM;
+ }
+
+- /* we support only mode 0, and no options */
+- master->mode_bits = 0;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
+
+ master->setup = rt2880_spi_setup;
+ master->transfer_one_message = rt2880_spi_transfer_one_message;
+- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
++ master->num_chipselect = ops->num_cs;
+
+ dev_set_drvdata(&pdev->dev, master);
+
+@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf
+ rs->clk = clk;
+ rs->master = master;
+ rs->sys_freq = clk_get_rate(rs->clk);
+- rs->ops = (struct rt2880_spi_ops *) match->data;
++ rs->ops = ops;
+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
+ spin_lock_irqsave(&rs->lock, flags);
+
diff --git a/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch
new file mode 100644
index 0000000..64c4150
--- /dev/null
+++ b/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch
@@ -0,0 +1,368 @@
+--- a/drivers/spi/spi-rt2880.c
++++ b/drivers/spi/spi-rt2880.c
+@@ -29,16 +29,17 @@
+ #define SPI_BPW_MASK(bits) BIT((bits) - 1)
+
+ #define DRIVER_NAME "spi-rt2880"
+-/* only one slave is supported*/
+-#define RALINK_NUM_CHIPSELECTS 1
+ /* in usec */
+ #define RALINK_SPI_WAIT_MAX_LOOP 2000
+
+-#define RAMIPS_SPI_STAT 0x00
+-#define RAMIPS_SPI_CFG 0x10
+-#define RAMIPS_SPI_CTL 0x14
+-#define RAMIPS_SPI_DATA 0x20
+-#define RAMIPS_SPI_FIFO_STAT 0x38
++#define RAMIPS_SPI_DEV_OFFSET 0x40
++
++#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET))
++#define RAMIPS_SPI_ARBITER 0xF0
+
+ /* SPISTAT register bit field */
+ #define SPISTAT_BUSY BIT(0)
+@@ -68,6 +69,10 @@
+ /* SPIFIFOSTAT register bit field */
+ #define SPIFIFOSTAT_TXFULL BIT(17)
+
++#define SPICTL_ARB_EN BIT(31)
++#define SPI1_POR BIT(1)
++#define SPI0_POR BIT(0)
++
+ #define MT7621_SPI_TRANS 0x00
+ #define SPITRANS_BUSY BIT(16)
+ #define MT7621_SPI_OPCODE 0x04
+@@ -78,13 +83,16 @@
+ #define MT7621_SPI_MASTER 0x28
+ #define MT7621_SPI_SPACE 0x3c
+
++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
++
+ struct rt2880_spi;
+
+ struct rt2880_spi_ops {
+ void (*init_hw)(struct rt2880_spi *rs);
+- void (*set_cs)(struct rt2880_spi *rs, int enable);
++ void (*set_cs)(struct spi_device *spi, int enable);
+ int (*baudrate_set)(struct spi_device *spi, unsigned int speed);
+ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer);
++ int num_cs;
+ };
+
+ struct rt2880_spi {
+@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st
+
+ static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+ {
++ int cs = spi->chip_select;
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 rate;
+ u32 prescale;
+@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc
+ prescale = ilog2(rate / 2);
+ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
+
+- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
+ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
+- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
+ rs->speed = speed;
+ return 0;
+ }
+@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev
+ {
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ unsigned int speed = spi->max_speed_hz;
+- int rc;
++ int rc, cs = spi->chip_select;
++ u32 reg;
+
+ if ((t != NULL) && t->speed_hz)
+ speed = t->speed_hz;
+@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev
+ return rc;
+ }
+
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs));
++
++ reg = (reg & ~SPICFG_MSBFIRST);
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING));
++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg);
++
++ reg = SPICTL_ARB_EN;
++ if (spi->mode & SPI_CS_HIGH) {
++ switch(cs) {
++ case 0:
++ reg |= SPI0_POR;
++ break;
++ case 1:
++ reg |= SPI1_POR;
++ break;
++ }
++ }
++
++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg);
++
+ return 0;
+ }
+
+-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
++static void rt2880_spi_set_cs(struct spi_device *spi, int enable)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
++
+ if (enable)
+- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
+ else
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA);
+ }
+
+-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable)
++static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR);
+
+ if (enable)
+@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2
+ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar);
+ }
+
+-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
++static inline int rt2880_spi_wait_till_ready(struct spi_device *spi)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+ u32 status;
+
+- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT);
++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs));
+ if ((status & SPISTAT_BUSY) == 0)
+ return 0;
+
+@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r
+ return -ETIMEDOUT;
+ }
+
+-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs)
++static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
+ {
++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ int i;
+
+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
+@@ -268,6 +323,7 @@ static unsigned int
+ rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer)
+ {
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++ int cs = spi->chip_select;
+ unsigned count = 0;
+ u8 *rx = xfer->rx_buf;
+ const u8 *tx = xfer->tx_buf;
+@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device
+
+ if (tx) {
+ for (count = 0; count < xfer->len; count++) {
+- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
+- err = rt2880_spi_wait_till_ready(rs);
++ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR);
++ err = rt2880_spi_wait_till_ready(spi);
+ if (err) {
+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
+ goto out;
+@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device
+
+ if (rx) {
+ for (count = 0; count < xfer->len; count++) {
+- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
+- err = rt2880_spi_wait_till_ready(rs);
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD);
++ err = rt2880_spi_wait_till_ready(spi);
+ if (err) {
+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
+ goto out;
+ }
+- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs));
+ }
+ }
+
+@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device
+ trans |= SPI_CTL_START;
+ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans);
+
+- mt7621_spi_wait_till_ready(rs);
++ mt7621_spi_wait_till_ready(spi);
+
+ if (rx) {
+ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0);
+@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa
+ }
+
+ if (!cs_active) {
+- rs->ops->set_cs(rs, 1);
++ rs->ops->set_cs(spi, 1);
+ cs_active = 1;
+ }
+
+@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa
+ udelay(t->delay_usecs);
+
+ if (t->cs_change) {
+- rs->ops->set_cs(rs, 0);
++ rs->ops->set_cs(spi, 0);
+ cs_active = 0;
+ }
+ }
+
+ msg_done:
+ if (cs_active)
+- rs->ops->set_cs(rs, 0);
++ rs->ops->set_cs(spi, 0);
+
+ m->status = status;
+ spi_finalize_current_message(master);
+@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+
+ if ((spi->max_speed_hz == 0) ||
+- (spi->max_speed_hz > (rs->sys_freq / 2)))
++ (spi->max_speed_hz > (rs->sys_freq / 2)))
+ spi->max_speed_hz = (rs->sys_freq / 2);
+
+ if (spi->max_speed_hz < (rs->sys_freq / 128)) {
+@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d
+
+ static void rt2880_spi_reset(struct rt2880_spi *rs)
+ {
+- rt2880_spi_write(rs, RAMIPS_SPI_CFG,
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0),
+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
+- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA);
++}
++
++static void rt5350_spi_reset(struct rt2880_spi *rs)
++{
++ int cs;
++
++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER,
++ SPICTL_ARB_EN);
++
++ for (cs = 0; cs < rs->ops->num_cs; cs++) {
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs),
++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA);
++ }
+ }
+
+ static void mt7621_spi_reset(struct rt2880_spi *rs)
+@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] =
+ .set_cs = rt2880_spi_set_cs,
+ .baudrate_set = rt2880_spi_baudrate_set,
+ .write_read = rt2880_spi_write_read,
++ .num_cs = 1,
++ }, {
++ .init_hw = rt5350_spi_reset,
++ .set_cs = rt2880_spi_set_cs,
++ .baudrate_set = rt2880_spi_baudrate_set,
++ .write_read = rt2880_spi_write_read,
++ .num_cs = 2,
+ }, {
+ .init_hw = mt7621_spi_reset,
+ .set_cs = mt7621_spi_set_cs,
+ .baudrate_set = mt7621_spi_baudrate_set,
+ .write_read = mt7621_spi_write_read,
++ .num_cs = 1,
+ },
+ };
+
+ static const struct of_device_id rt2880_spi_match[] = {
+ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]},
+- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] },
++ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]},
++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, rt2880_spi_match);
+
+ static int rt2880_spi_probe(struct platform_device *pdev)
+ {
+- const struct of_device_id *match;
++ const struct of_device_id *match;
+ struct spi_master *master;
+ struct rt2880_spi *rs;
+ unsigned long flags;
+@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf
+ struct resource *r;
+ int status = 0;
+ struct clk *clk;
++ struct rt2880_spi_ops *ops;
+
+- match = of_match_device(rt2880_spi_match, &pdev->dev);
++ match = of_match_device(rt2880_spi_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
++ ops = (struct rt2880_spi_ops *)match->data;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, r);
+@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf
+ return -ENOMEM;
+ }
+
+- /* we support only mode 0, and no options */
+- master->mode_bits = 0;
++ master->mode_bits = RT2880_SPI_MODE_BITS;
+
+ master->setup = rt2880_spi_setup;
+ master->transfer_one_message = rt2880_spi_transfer_one_message;
+- master->num_chipselect = RALINK_NUM_CHIPSELECTS;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->dev.of_node = pdev->dev.of_node;
++ master->num_chipselect = ops->num_cs;
+
+ dev_set_drvdata(&pdev->dev, master);
+
+@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf
+ rs->clk = clk;
+ rs->master = master;
+ rs->sys_freq = clk_get_rate(rs->clk);
+- rs->ops = (struct rt2880_spi_ops *) match->data;
++ rs->ops = ops;
+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
+ spin_lock_irqsave(&rs->lock, flags);
+