ar71xx: add support for TP-Link Archer C25 v1

The TP-Link Archer C25 is a low-cost dual-band router.

Specification:

- CPU: Atheros QCA9561 775 MHz
- RAM: 64 MB
- Flash: 8 MB
- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
- NET: 5x 10/100 Mbps Ethernet

Some LEDs are controlled by an additional 74HC595 chip.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[minor code style fixes, boards alphabetical order fixes,
reworked commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

14 files changed, 274 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index be6dfcc..87f99ea 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -54,6 +54,15 @@ sc1750|\
 sc450)
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
 	;;
+archer-c25-v1)
+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+	ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+	;;
 archer-c59-v1|\
 archer-c60-v1)
 	ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index b805487..80355d6 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -133,6 +133,7 @@ ar71xx_setup_interfaces()
 	a60|\
 	alfa-ap96|\
 	alfa-nx|\
+	archer-c25-v1|\
 	dr344|\
 	gl-ar150|\
 	gl-ar300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 369abde..dce5d8e 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -51,6 +51,7 @@ get_status_led() {
 	ap135-020)
 		status_led="ap135:green:status"
 		;;
+	archer-c25-v1|\
 	archer-c59-v1|\
 	archer-c60-v1|\
 	mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d4afbbc..6c83a2f 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -92,6 +92,7 @@ case "$FIRMWARE" in
 		ath10kcal_extract "art" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
+	archer-c25-v1|\
 	archer-c59-v1|\
 	archer-c60-v1|\
 	tl-wdr6500-v2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 5660d3e..a1abfa0 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -440,6 +440,9 @@ ar71xx_board_detect() {
 	*"AP90Q")
 		name="ap90q"
 		;;
+	*"Archer C25 v1")
+		name="archer-c25-v1"
+		;;
 	*"Archer C5")
 		name="archer-c5"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e14f8f3..4ee4671 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -206,6 +206,7 @@ platform_check_image() {
 	ap132|\
 	ap531b0|\
 	ap90q|\
+	archer-c25-v1|\
 	archer-c59-v1|\
 	archer-c60-v1|\
 	bullet-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index df1108d..6ac3a9e 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_AP531B0=y
 # CONFIG_ATH79_MACH_AP81 is not set
 CONFIG_ATH79_MACH_AP90Q=y
 CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C25_V1=y
 CONFIG_ATH79_MACH_ARCHER_C59_V1=y
 CONFIG_ATH79_MACH_ARCHER_C60_V1=y
 CONFIG_ATH79_MACH_ARCHER_C7=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ae64c6e..6182a6f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1318,6 +1318,16 @@ config ATH79_MACH_BSB
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_ARCHER_C25_V1
+	bool "TP-LINK Archer C25 v1 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_ARCHER_C59_V1
 	bool "TP-LINK Archer C59 v1 support"
 	select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index bf5515b..5c22faf 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP152)			+= mach-ap152.o
 obj-$(CONFIG_ATH79_MACH_AP531B0)		+= mach-ap531b0.o
 obj-$(CONFIG_ATH79_MACH_AP90Q)			+= mach-ap90q.o
 obj-$(CONFIG_ATH79_MACH_AP96)			+= mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1)		+= mach-archer-c25-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1)		+= mach-archer-c59-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1)		+= mach-archer-c60-v1.o
 obj-$(CONFIG_ATH79_MACH_ARCHER_C7)		+= mach-archer-c7.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
new file mode 100644
index 0000000..a0f001c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
@@ -0,0 +1,227 @@
+/*
+ *  TP-Link Archer C25 v1 board support
+ *
+ *  Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
+ *  based on mach-archer-c60/C59-v1.c
+ *  Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#define ARCHER_C25_GPIO_SHIFT_OE	21 /* OE,   Output Enable */
+#define ARCHER_C25_GPIO_SHIFT_SER	14 /* DS,   Data Serial Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLK	15 /* SHCP, Shift Reg Clock Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLR	19 /* MR,   Master Reset */
+#define ARCHER_C25_GPIO_SHIFT_RCLK	16 /* STCP, Storage Reg Clock Input */
+
+#define ARCHER_C25_74HC_GPIO_BASE		QCA956X_GPIO_COUNT
+#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER	27
+#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN	28
+#define ARCHER_C25_74HC_GPIO_LED_WLAN2		29
+#define ARCHER_C25_74HC_GPIO_LED_WLAN5		30
+#define ARCHER_C25_74HC_GPIO_LED_LAN1		23
+#define ARCHER_C25_74HC_GPIO_LED_LAN2		24
+#define ARCHER_C25_74HC_GPIO_LED_LAN3		25
+#define ARCHER_C25_74HC_GPIO_LED_LAN4		26
+
+#define ARCHER_C25_V1_SSR_BIT_0			0
+#define ARCHER_C25_V1_SSR_BIT_1			1
+#define ARCHER_C25_V1_SSR_BIT_2			2
+#define ARCHER_C25_V1_SSR_BIT_3			3
+#define ARCHER_C25_V1_SSR_BIT_4			4
+#define ARCHER_C25_V1_SSR_BIT_5			5
+#define ARCHER_C25_V1_SSR_BIT_6			6
+#define ARCHER_C25_V1_SSR_BIT_7			7
+
+
+#define ARCHER_C25_V1_KEYS_POLL_INTERVAL	20
+#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL	\
+					(3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C25_V1_GPIO_BTN_RESET		1
+#define ARCHER_C25_V1_GPIO_BTN_RFKILL		22
+
+#define ARCHER_C25_V1_GPIO_LED_POWER		17
+#define ARCHER_C25_V1_GPIO_LED_WPS		2
+
+#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET	0x1000
+
+static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
+	.sck		= ARCHER_C25_GPIO_SHIFT_SRCLK,
+	.miso		= SPI_GPIO_NO_MISO,
+	.mosi		= ARCHER_C25_GPIO_SHIFT_SER,
+	.num_chipselect	= 1,
+};
+
+static u8 archer_c25_v1_ssr_initdata[] __initdata = {
+	BIT(ARCHER_C25_V1_SSR_BIT_7) |
+	BIT(ARCHER_C25_V1_SSR_BIT_6) |
+	BIT(ARCHER_C25_V1_SSR_BIT_5) |
+	BIT(ARCHER_C25_V1_SSR_BIT_4) |
+	BIT(ARCHER_C25_V1_SSR_BIT_3) |
+	BIT(ARCHER_C25_V1_SSR_BIT_2) |
+	BIT(ARCHER_C25_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
+	.base = ARCHER_C25_74HC_GPIO_BASE,
+	.num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
+	.init_data = archer_c25_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c25_v1_spi_device = {
+	.name		= "spi_gpio",
+	.id		= 1,
+	.dev = {
+		.platform_data = &archer_c25_v1_spi_data,
+	},
+};
+
+static struct spi_board_info archer_c25_v1_spi_info[] = {
+	{
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 10000000,
+		.modalias		= "74x164",
+		.platform_data		= &archer_c25_v1_ssr_data,
+		.controller_data	= (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
+	},
+};
+
+static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "archer-c25-v1:green:power",
+		.gpio		= ARCHER_C25_V1_GPIO_LED_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:wps",
+		.gpio		= ARCHER_C25_V1_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:wlan2g",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_WLAN2,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:wlan5g",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_WLAN5,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:lan1",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_LAN1,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:lan2",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_LAN2,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:lan3",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_LAN3,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:lan4",
+		.gpio		= ARCHER_C25_74HC_GPIO_LED_LAN4,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:green:wan",
+		.gpio		=  ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "archer-c25-v1:amber:wan",
+		.gpio		=  ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
+	{
+		.desc			= "Reset button",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C25_V1_GPIO_BTN_RESET,
+		.active_low		= 1,
+	}, {
+		.desc			= "RFKILL button",
+		.type			= EV_KEY,
+		.code			= KEY_RFKILL,
+		.debounce_interval	= ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= ARCHER_C25_V1_GPIO_BTN_RFKILL,
+		.active_low		= 1,
+	},
+};
+
+static void __init archer_c25_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
+	u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+	ath79_register_m25p80(NULL);
+
+	spi_register_board_info(archer_c25_v1_spi_info,
+				ARRAY_SIZE(archer_c25_v1_spi_info));
+
+	platform_device_register(&archer_c25_v1_spi_device);
+
+	gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
+			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+			 "LED control");
+
+	gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "LED reset");
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
+				 archer_c25_v1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(archer_c25_v1_gpio_keys),
+					archer_c25_v1_gpio_keys);
+
+	ath79_register_mdio(0, 0x0);
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+	/* WAN port */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_register_eth(0);
+
+	/* LAN ports */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_register_eth(1);
+
+	ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
+	ap91_pci_init(NULL, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
+	     archer_c25_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 46d250d..19d06c9 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -40,6 +40,7 @@ enum ath79_mach_type {
 	ATH79_MACH_AP531B0,			/* Rockeetech AP531B0 */
 	ATH79_MACH_AP90Q,			/* YunCore AP90Q */
 	ATH79_MACH_AP96,			/* Atheros AP96 */
+	ATH79_MACH_ARCHER_C25_V1,		/* TP-LINK Archer C25 V1 board */
 	ATH79_MACH_ARCHER_C5,			/* TP-LINK Archer C5 board */
 	ATH79_MACH_ARCHER_C59_V1,		/* TP-LINK Archer C59 V1 board */
 	ATH79_MACH_ARCHER_C60_V1,		/* TP-LINK Archer C60 V1 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index d9c7982..c80b4ef 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -118,6 +118,22 @@ define Device/tplink-16mlzma
   IMAGE_SIZE := 15872k
 endef
 
+define Device/archer-c25-v1
+  DEVICE_TITLE := TP-LINK Archer C25 v1
+  DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
+  BOARDNAME := ARCHER-C25-V1
+  TPLINK_BOARD_NAME := ARCHER-C25-V1
+  DEVICE_PROFILE := ARCHERC25V1
+  IMAGE_SIZE := 7808k
+  LOADER_TYPE := elf
+  KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+  IMAGES := sysupgrade.bin factory.bin
+  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+  MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
+endef
+TARGET_DEVICES += archer-c25-v1
+
 define Device/archer-c59-v1
   DEVICE_TITLE := TP-LINK Archer C59 v1
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 748252c..f00933b 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -16,6 +16,7 @@
 # CONFIG_ATH79_MACH_AP531B0 is not set
 # CONFIG_ATH79_MACH_AP90Q is not set
 # CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 7ae42fe..41eacbf 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -16,6 +16,7 @@
 # CONFIG_ATH79_MACH_AP531B0 is not set
 # CONFIG_ATH79_MACH_AP90Q is not set
 # CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
 # CONFIG_ATH79_MACH_ARCHER_C7 is not set