Revert "ramips: Move PCI driver to files directory"

This reverts commit a098a78a33a6b096d15c9982b5d6457988e09f03.

Signed-off-by: John Crispin <john@phrozen.org>

2 files changed, 842 insertions, 837 deletions

diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c
deleted file mode 100644
index 5125412..0000000
--- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/**************************************************************************
- *
- *  BRIEF MODULE DESCRIPTION
- *     PCI init for Ralink RT2880 solution
- *
- *  Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2007 Bruce Chang
- * Initial Release
- *
- * May 2009 Bruce Chang
- * support RT2880/RT3883 PCIe
- *
- * May 2011 Bruce Chang
- * support RT6855/MT7620 PCIe
- *
- **************************************************************************
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/version.h>
-#include <asm/pci.h>
-#include <asm/io.h>
-#include <asm/mips-cm.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_pci.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
-#include <ralink_regs.h>
-
-extern void pcie_phy_init(void);
-extern void chk_phy_pll(void);
-
-/*
- * These functions and structures provide the BIOS scan and mapping of the PCI
- * devices.
- */
-
-#define CONFIG_PCIE_PORT0
-#define CONFIG_PCIE_PORT1
-#define CONFIG_PCIE_PORT2
-#define RALINK_PCIE0_CLK_EN             (1<<24)
-#define RALINK_PCIE1_CLK_EN             (1<<25)
-#define RALINK_PCIE2_CLK_EN             (1<<26)
-
-#define RALINK_PCI_CONFIG_ADDR                         0x20
-#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG     0x24
-#define RALINK_INT_PCIE0         pcie_irq[0]
-#define RALINK_INT_PCIE1         pcie_irq[1]
-#define RALINK_INT_PCIE2         pcie_irq[2]
-#define RALINK_PCI_MEMBASE              *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-#define RALINK_PCI_IOBASE               *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-#define RALINK_PCIE0_RST                (1<<24)
-#define RALINK_PCIE1_RST                (1<<25)
-#define RALINK_PCIE2_RST                (1<<26)
-#define RALINK_SYSCTL_BASE              0xBE000000
-
-#define RALINK_PCI_PCICFG_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-#define RALINK_PCI_PCIMSK_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-#define RALINK_PCI_BASE                 0xBE140000
-
-#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-#define RT6855_PCIE0_OFFSET     0x2000
-#define RT6855_PCIE1_OFFSET     0x3000
-#define RT6855_PCIE2_OFFSET     0x4000
-
-#define RALINK_PCI0_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-#define RALINK_PCI0_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-#define RALINK_PCI0_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-#define RALINK_PCI0_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-#define RALINK_PCI0_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-#define RALINK_PCI0_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-#define RALINK_PCI0_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-#define RALINK_PCI0_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-
-#define RALINK_PCI1_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-#define RALINK_PCI1_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-#define RALINK_PCI1_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-#define RALINK_PCI1_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-#define RALINK_PCI1_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-#define RALINK_PCI1_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-#define RALINK_PCI1_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-#define RALINK_PCI1_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-
-#define RALINK_PCI2_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-#define RALINK_PCI2_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-#define RALINK_PCI2_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-#define RALINK_PCI2_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-#define RALINK_PCI2_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-#define RALINK_PCI2_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-#define RALINK_PCI2_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-#define RALINK_PCI2_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-
-#define RALINK_PCIEPHY_P0P1_CTL_OFFSET  (RALINK_PCI_BASE + 0x9000)
-#define RALINK_PCIEPHY_P2_CTL_OFFSET    (RALINK_PCI_BASE + 0xA000)
-
-
-#define MV_WRITE(ofs, data)  \
-        *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-#define MV_READ(ofs, data)   \
-	        *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-#define MV_READ_DATA(ofs)    \
-		        le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-
-#define MV_WRITE_16(ofs, data)  \
-        *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-#define MV_READ_16(ofs, data)   \
-	        *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-
-#define MV_WRITE_8(ofs, data)  \
-        *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-#define MV_READ_8(ofs, data)   \
-	        *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-
-
-
-#define RALINK_PCI_MM_MAP_BASE	0x60000000
-#define RALINK_PCI_IO_MAP_BASE	0x1e160000
-
-#define RALINK_SYSTEM_CONTROL_BASE	0xbe000000
-#define GPIO_PERST
-#define ASSERT_SYSRST_PCIE(val)		do {	\
-						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
-							RALINK_RSTCTRL |= val;	\
-						else	\
-							RALINK_RSTCTRL &= ~val;	\
-					} while(0)
-#define DEASSERT_SYSRST_PCIE(val) 	do {	\
-						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
-							RALINK_RSTCTRL &= ~val;	\
-						else	\
-							RALINK_RSTCTRL |= val;	\
-					} while(0)
-#define RALINK_SYSCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
-#define RALINK_CLKCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
-#define RALINK_RSTCTRL			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
-#define RALINK_GPIOMODE			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
-#define RALINK_PCIE_CLK_GEN		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
-#define RALINK_PCIE_CLK_GEN1		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
-#define PPLL_CFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
-#define PPLL_DRV			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
-//RALINK_SYSCFG1 bit
-#define RALINK_PCI_HOST_MODE_EN		(1<<7)
-#define RALINK_PCIE_RC_MODE_EN		(1<<8)
-//RALINK_RSTCTRL bit
-#define RALINK_PCIE_RST			(1<<23)
-#define RALINK_PCI_RST			(1<<24)
-//RALINK_CLKCFG1 bit
-#define RALINK_PCI_CLK_EN		(1<<19)
-#define RALINK_PCIE_CLK_EN		(1<<21)
-//RALINK_GPIOMODE bit
-#define PCI_SLOTx2			(1<<11)
-#define PCI_SLOTx1			(2<<11)
-//MTK PCIE PLL bit
-#define PDRV_SW_SET			(1<<31)
-#define LC_CKDRVPD_			(1<<19)
-
-#define MEMORY_BASE 0x0
-static int pcie_link_status = 0;
-
-#define PCI_ACCESS_READ_1  0
-#define PCI_ACCESS_READ_2  1
-#define PCI_ACCESS_READ_4  2
-#define PCI_ACCESS_WRITE_1 3
-#define PCI_ACCESS_WRITE_2 4
-#define PCI_ACCESS_WRITE_4 5
-
-static int pcie_irq[3];
-
-static int config_access(unsigned char access_type, struct pci_bus *bus,
-			unsigned int devfn, unsigned int where, u32 * data)
-{
-	unsigned int slot = PCI_SLOT(devfn);
-	u8 func = PCI_FUNC(devfn);
-	uint32_t address_reg, data_reg;
-	unsigned int address;
-
-	address_reg = RALINK_PCI_CONFIG_ADDR;
-	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-
-	address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-	MV_WRITE(address_reg, address);
-
-	switch(access_type) {
-	case PCI_ACCESS_WRITE_1:
-		MV_WRITE_8(data_reg+(where&0x3), *data);
-		break;
-	case PCI_ACCESS_WRITE_2:
-		MV_WRITE_16(data_reg+(where&0x3), *data);
-		break;
-	case PCI_ACCESS_WRITE_4:
-		MV_WRITE(data_reg, *data);
-		break;
-	case PCI_ACCESS_READ_1:
-		MV_READ_8( data_reg+(where&0x3), data);
-		break;
-	case PCI_ACCESS_READ_2:
-		MV_READ_16(data_reg+(where&0x3), data);
-		break;
-	case PCI_ACCESS_READ_4:
-		MV_READ(data_reg, data);
-		break;
-	default:
-		printk("no specify access type\n");
-		break;
-	}
-	return 0;
-}
-
-static int
-read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
-{
-	return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
-}
-
-static int
-read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
-{
-	return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
-}
-
-static int
-read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
-{
-	return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
-}
-
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
-{
-	if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
-{
-	if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
-{
-	if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
-		return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int
-pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-{
-	switch (size) {
-	case 1:
-		return read_config_byte(bus, devfn, where, (u8 *) val);
-	case 2:
-		return read_config_word(bus, devfn, where, (u16 *) val);
-	default:
-		return read_config_dword(bus, devfn, where, val);
-	}
-}
-
-static int
-pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-	switch (size) {
-	case 1:
-		return write_config_byte(bus, devfn, where, (u8) val);
-	case 2:
-		return write_config_word(bus, devfn, where, (u16) val);
-	default:
-		return write_config_dword(bus, devfn, where, val);
-	}
-}
-
-struct pci_ops mt7621_pci_ops= {
-	.read		=  pci_config_read,
-	.write		= pci_config_write,
-};
-
-static struct resource mt7621_res_pci_mem1 = {
-	.name		= "PCI MEM1",
-	.start		= RALINK_PCI_MM_MAP_BASE,
-	.end		= (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
-	.flags		= IORESOURCE_MEM,
-};
-static struct resource mt7621_res_pci_io1 = {
-	.name		= "PCI I/O1",
-	.start		= RALINK_PCI_IO_MAP_BASE,
-	.end		= (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
-	.flags		= IORESOURCE_IO,
-};
-
-static struct pci_controller mt7621_controller = {
-	.pci_ops	= &mt7621_pci_ops,
-	.mem_resource	= &mt7621_res_pci_mem1,
-	.io_resource	= &mt7621_res_pci_io1,
-	.mem_offset	= 0x00000000UL,
-	.io_offset	= 0x00000000UL,
-	.io_map_base	= 0xa0000000,
-};
-
-static void
-read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
-{
-	unsigned int address_reg, data_reg, address;
-
-	address_reg = RALINK_PCI_CONFIG_ADDR;
-        data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-        MV_WRITE(address_reg, address);
-        MV_READ(data_reg, val);
-	return;
-}
-
-static void
-write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
-{
-	unsigned int address_reg, data_reg, address;
-
-	address_reg = RALINK_PCI_CONFIG_ADDR;
-	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-	MV_WRITE(address_reg, address);
-	MV_WRITE(data_reg, val);
-	return;
-}
-
-
-int
-pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	u16 cmd;
-	u32 val;
-	int irq = 0;
-
-	if ((dev->bus->number == 0) && (slot == 0)) {
-		write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-		read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-		printk("BAR0 at slot 0 = %x\n", val);
-		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-	} else if((dev->bus->number == 0) && (slot == 0x1)) {
-		write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-		read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-		printk("BAR0 at slot 1 = %x\n", val);
-		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-	} else if((dev->bus->number == 0) && (slot == 0x2)) {
-		write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-		read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-		printk("BAR0 at slot 2 = %x\n", val);
-		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
-		switch (pcie_link_status) {
-		case 2:
-		case 6:
-			irq = RALINK_INT_PCIE1;
-			break;
-		case 4:
-			irq = RALINK_INT_PCIE2;
-			break;
-		default:
-			irq = RALINK_INT_PCIE0;
-		}
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else if ((dev->bus->number == 2) && (slot == 0x0)) {
-		switch (pcie_link_status) {
-		case 5:
-		case 6:
-			irq = RALINK_INT_PCIE2;
-			break;
-		default:
-			irq = RALINK_INT_PCIE1;
-		}
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else if ((dev->bus->number == 2) && (slot == 0x1)) {
-		switch (pcie_link_status) {
-		case 5:
-		case 6:
-			irq = RALINK_INT_PCIE2;
-			break;
-		default:
-			irq = RALINK_INT_PCIE1;
-		}
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else if ((dev->bus->number ==3) && (slot == 0x0)) {
-		irq = RALINK_INT_PCIE2;
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else if ((dev->bus->number ==3) && (slot == 0x1)) {
-		irq = RALINK_INT_PCIE2;
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else if ((dev->bus->number ==3) && (slot == 0x2)) {
-		irq = RALINK_INT_PCIE2;
-		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-	} else {
-		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-		return 0;
-	}
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF);  //configure latency timer 0x10
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	return irq;
-}
-
-void
-set_pcie_phy(u32 *addr, int start_b, int bits, int val)
-{
-//	printk("0x%p:", addr);
-//	printk(" %x", *addr);
-	*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
-	*(unsigned int *)(addr) |= val << start_b;
-//	printk(" -> %x\n", *addr);
-}
-
-void
-bypass_pipe_rst(void)
-{
-#if defined (CONFIG_PCIE_PORT0)
-	/* PCIe Port 0 */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	/* PCIe Port 1 */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	/* PCIe Port 2 */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
-#endif
-}
-
-void
-set_phy_for_ssc(void)
-{
-	unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
-
-	reg = (reg >> 6) & 0x7;
-#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
-	/* Set PCIe Port0 & Port1 PHY to disable SSC */
-	/* Debug Xtal Type */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 1 enable control
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 1 disable
-	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
-		printk("***** Xtal 40MHz *****\n");
-	} else {			// 25MHz | 20MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
-		if (reg >= 6) { 	
-			printk("***** Xtal 25MHz *****\n");
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
-		} else {
-			printk("***** Xtal 20MHz *****\n");
-		}
-	}
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
-	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
-	}
-	/* Enable PHY and disable force mode */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 1 enable
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 1 disable control
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	/* Set PCIe Port2 PHY to disable SSC */
-	/* Debug Xtal Type */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
-	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
-	} else {			// 25MHz | 20MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
-		if (reg >= 6) { 	// 25MHz Xtal
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
-			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
-		}
-	}
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
-	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
-		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
-	}
-	/* Enable PHY and disable force mode */
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
-	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
-#endif
-}
-
-void setup_cm_memory_region(struct resource *mem_resource)
-{
-	resource_size_t mask;
-	if (mips_cps_numiocu(0)) {
-		/* FIXME: hardware doesn't accept mask values with 1s after
-		   0s (e.g. 0xffef), so it would be great to warn if that's
-		   about to happen */
-		mask = ~(mem_resource->end - mem_resource->start);
-
-		write_gcr_reg1_base(mem_resource->start);
-		write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
-		printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n",
-		       read_gcr_reg1_base(),
-		       read_gcr_reg1_mask());
-	}
-}
-
-static int mt7621_pci_probe(struct platform_device *pdev)
-{
-	unsigned long val = 0;
-	int i;
-
-	for (i = 0; i < 3; i++)
-		pcie_irq[i] = irq_of_parse_and_map(pdev->dev.of_node, i);
-
-	iomem_resource.start = 0;
-	iomem_resource.end= ~0;
-	ioport_resource.start= 0;
-	ioport_resource.end = ~0;
-
-#if defined (CONFIG_PCIE_PORT0)
-	val = RALINK_PCIE0_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	val |= RALINK_PCIE1_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	val |= RALINK_PCIE2_RST;
-#endif
-	ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-	printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-	*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
-	*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
-	mdelay(100);
-	*(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
-	mdelay(100);
-	*(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7);		// clear DATA
-
-	mdelay(100);
-#else
-	*(unsigned int *)(0xbe000060) &= ~0x00000c00;
-#endif
-#if defined (CONFIG_PCIE_PORT0)
-	val = RALINK_PCIE0_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	val |= RALINK_PCIE1_RST;
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	val |= RALINK_PCIE2_RST;
-#endif
-	DEASSERT_SYSRST_PCIE(val);
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-
-	if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
-		bypass_pipe_rst();
-	set_phy_for_ssc();
-	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-
-#if defined (CONFIG_PCIE_PORT0)
-	read_config(0, 0, 0, 0x70c, &val);
-	printk("Port 0 N_FTS = %x\n", (unsigned int)val);
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	read_config(0, 1, 0, 0x70c, &val);
-	printk("Port 1 N_FTS = %x\n", (unsigned int)val);
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	read_config(0, 2, 0, 0x70c, &val);
-	printk("Port 2 N_FTS = %x\n", (unsigned int)val);
-#endif
-
-	RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
-	RALINK_SYSCFG1 &= ~(0x30);
-	RALINK_SYSCFG1 |= (2<<4);
-	RALINK_PCIE_CLK_GEN &= 0x7fffffff;
-	RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
-	RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
-	RALINK_PCIE_CLK_GEN |= 0x80000000;
-	mdelay(50);
-	RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-	
-
-#if defined GPIO_PERST /* add GPIO control instead of PERST_N */  /*chhung*/
-	*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;		// set DATA
-	mdelay(100);
-#else
-	RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
-#endif
-	mdelay(500);
-
-
-	mdelay(500);
-#if defined (CONFIG_PCIE_PORT0)
-	if(( RALINK_PCI0_STATUS & 0x1) == 0)
-	{
-		printk("PCIE0 no card, disable it(RST&CLK)\n");
-		ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
-		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
-		pcie_link_status &= ~(1<<0);
-	} else {
-		pcie_link_status |= 1<<0;
-		RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
-	}
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	if(( RALINK_PCI1_STATUS & 0x1) == 0)
-	{
-		printk("PCIE1 no card, disable it(RST&CLK)\n");
-		ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
-		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
-		pcie_link_status &= ~(1<<1);
-	} else {
-		pcie_link_status |= 1<<1;
-		RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
-	}
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	if (( RALINK_PCI2_STATUS & 0x1) == 0) {
-		printk("PCIE2 no card, disable it(RST&CLK)\n");
-		ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
-		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
-		pcie_link_status &= ~(1<<2);
-	} else {
-		pcie_link_status |= 1<<2;
-		RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
-	}
-#endif
-	if (pcie_link_status == 0)
-		return 0;
-
-/*
-pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
-3'b000			x		x		x
-3'b001			x		x		0
-3'b010			x		0		x
-3'b011			x		1		0
-3'b100			0		x		x
-3'b101			1		x		0
-3'b110			1		0		x
-3'b111			2		1		0
-*/
-	switch(pcie_link_status) {
-	case 2:
-		RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
-		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
-		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
-		break;
-	case 4:
-		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
-		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
-		RALINK_PCI_PCICFG_ADDR |= 0x0 << 24;	//port2
-		break;
-	case 5:
-		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-		RALINK_PCI_PCICFG_ADDR |= 0x0 << 16;	//port0
-		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
-		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
-		break;
-	case 6:
-		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-		RALINK_PCI_PCICFG_ADDR |= 0x2 << 16;	//port0
-		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
-		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
-		break;
-	}
-	printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-	//printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
-
-/*
-	ioport_resource.start = mt7621_res_pci_io1.start;
-  	ioport_resource.end = mt7621_res_pci_io1.end;
-*/
-
-	RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
-	RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
-
-#if defined (CONFIG_PCIE_PORT0)
-	//PCIe0
-	if((pcie_link_status & 0x1) != 0) {
-		RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI0_CLASS = 0x06040001;
-		printk("PCIE0 enabled\n");
-	}
-#endif
-#if defined (CONFIG_PCIE_PORT1)
-	//PCIe1
-	if ((pcie_link_status & 0x2) != 0) {
-		RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI1_CLASS = 0x06040001;
-		printk("PCIE1 enabled\n");
-	}
-#endif
-#if defined (CONFIG_PCIE_PORT2)
-	//PCIe2
-	if ((pcie_link_status & 0x4) != 0) {
-		RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
-		RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
-		RALINK_PCI2_CLASS = 0x06040001;
-		printk("PCIE2 enabled\n");
-	}
-#endif
-
-
-	switch(pcie_link_status) {
-	case 7:
-		read_config(0, 2, 0, 0x4, &val);
-		write_config(0, 2, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
-		read_config(0, 2, 0, 0x70c, &val);
-		val &= ~(0xff)<<8;
-		val |= 0x50<<8;
-		write_config(0, 2, 0, 0x70c, val);
-	case 3:
-	case 5:
-	case 6:
-		read_config(0, 1, 0, 0x4, &val);
-		write_config(0, 1, 0, 0x4, val|0x4);
-		// write_config(0, 1, 0, 0x4, val|0x7);
-		read_config(0, 1, 0, 0x70c, &val);
-		val &= ~(0xff)<<8;
-		val |= 0x50<<8;
-		write_config(0, 1, 0, 0x70c, val);
-	default:
-		read_config(0, 0, 0, 0x4, &val);
-		write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-		// write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
-		read_config(0, 0, 0, 0x70c, &val);
-		val &= ~(0xff)<<8;
-		val |= 0x50<<8;
-		write_config(0, 0, 0, 0x70c, val);
-	}
-
-	pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node);
-	setup_cm_memory_region(mt7621_controller.mem_resource);
-	register_pci_controller(&mt7621_controller);
-	return 0;
-
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-static const struct of_device_id mt7621_pci_ids[] = {
-	{ .compatible = "mediatek,mt7621-pci" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
-
-static struct platform_driver mt7621_pci_driver = {
-	.probe = mt7621_pci_probe,
-	.driver = {
-		.name = "mt7621-pci",
-		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(mt7621_pci_ids),
-	},
-};
-
-static int __init mt7621_pci_init(void)
-{
-	return platform_driver_register(&mt7621_pci_driver);
-}
-
-arch_initcall(mt7621_pci_init);
diff --git a/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
index 2d50510..b6f1ce9 100644
--- a/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ b/target/linux/ramips/patches-4.14/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -6,7 +6,9 @@ Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver
 Signed-off-by: John Crispin <blogic@openwrt.org>
 ---
  arch/mips/pci/Makefile     |    1 +
- 1 file changed, 1 insertion(+)
+ arch/mips/pci/pci-mt7621.c |  813 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 814 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7621.c
 
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
@@ -18,3 +20,842 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
  obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7621.c
+@@ -0,0 +1,836 @@
++/**************************************************************************
++ *
++ *  BRIEF MODULE DESCRIPTION
++ *     PCI init for Ralink RT2880 solution
++ *
++ *  Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ **************************************************************************
++ * May 2007 Bruce Chang
++ * Initial Release
++ *
++ * May 2009 Bruce Chang
++ * support RT2880/RT3883 PCIe
++ *
++ * May 2011 Bruce Chang
++ * support RT6855/MT7620 PCIe
++ *
++ **************************************************************************
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/version.h>
++#include <asm/pci.h>
++#include <asm/io.h>
++#include <asm/mips-cm.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/of.h>
++#include <linux/of_pci.h>
++#include <linux/of_irq.h>
++#include <linux/platform_device.h>
++
++#include <ralink_regs.h>
++
++extern void pcie_phy_init(void);
++extern void chk_phy_pll(void);
++
++/*
++ * These functions and structures provide the BIOS scan and mapping of the PCI
++ * devices.
++ */
++
++#define CONFIG_PCIE_PORT0
++#define CONFIG_PCIE_PORT1
++#define CONFIG_PCIE_PORT2
++#define RALINK_PCIE0_CLK_EN             (1<<24)
++#define RALINK_PCIE1_CLK_EN             (1<<25)
++#define RALINK_PCIE2_CLK_EN             (1<<26)
++
++#define RALINK_PCI_CONFIG_ADDR                         0x20
++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG     0x24
++#define RALINK_INT_PCIE0         pcie_irq[0]
++#define RALINK_INT_PCIE1         pcie_irq[1]
++#define RALINK_INT_PCIE2         pcie_irq[2]
++#define RALINK_PCI_MEMBASE              *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
++#define RALINK_PCI_IOBASE               *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
++#define RALINK_PCIE0_RST                (1<<24)
++#define RALINK_PCIE1_RST                (1<<25)
++#define RALINK_PCIE2_RST                (1<<26)
++#define RALINK_SYSCTL_BASE              0xBE000000
++
++#define RALINK_PCI_PCICFG_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
++#define RALINK_PCI_PCIMSK_ADDR          *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
++#define RALINK_PCI_BASE                 0xBE140000
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
++#define RT6855_PCIE0_OFFSET     0x2000
++#define RT6855_PCIE1_OFFSET     0x3000
++#define RT6855_PCIE2_OFFSET     0x4000
++
++#define RALINK_PCI0_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
++#define RALINK_PCI0_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
++#define RALINK_PCI0_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
++#define RALINK_PCI0_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
++#define RALINK_PCI0_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
++#define RALINK_PCI0_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
++#define RALINK_PCI0_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
++#define RALINK_PCI0_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
++
++#define RALINK_PCI1_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
++#define RALINK_PCI1_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
++#define RALINK_PCI1_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
++#define RALINK_PCI1_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
++#define RALINK_PCI1_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
++#define RALINK_PCI1_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
++#define RALINK_PCI1_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
++#define RALINK_PCI1_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
++
++#define RALINK_PCI2_BAR0SETUP_ADDR      *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
++#define RALINK_PCI2_IMBASEBAR0_ADDR     *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
++#define RALINK_PCI2_ID                  *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
++#define RALINK_PCI2_CLASS               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
++#define RALINK_PCI2_SUBID               *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
++#define RALINK_PCI2_STATUS              *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
++#define RALINK_PCI2_DERR                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
++#define RALINK_PCI2_ECRC                *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
++
++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET  (RALINK_PCI_BASE + 0x9000)
++#define RALINK_PCIEPHY_P2_CTL_OFFSET    (RALINK_PCI_BASE + 0xA000)
++
++
++#define MV_WRITE(ofs, data)  \
++        *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
++#define MV_READ(ofs, data)   \
++	        *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++#define MV_READ_DATA(ofs)    \
++		        le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_16(ofs, data)  \
++        *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
++#define MV_READ_16(ofs, data)   \
++	        *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
++
++#define MV_WRITE_8(ofs, data)  \
++        *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
++#define MV_READ_8(ofs, data)   \
++	        *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
++
++
++
++#define RALINK_PCI_MM_MAP_BASE	0x60000000
++#define RALINK_PCI_IO_MAP_BASE	0x1e160000
++
++#define RALINK_SYSTEM_CONTROL_BASE	0xbe000000
++#define GPIO_PERST
++#define ASSERT_SYSRST_PCIE(val)		do {	\
++						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
++							RALINK_RSTCTRL |= val;	\
++						else	\
++							RALINK_RSTCTRL &= ~val;	\
++					} while(0)
++#define DEASSERT_SYSRST_PCIE(val) 	do {	\
++						if (*(unsigned int *)(0xbe00000c) == 0x00030101)	\
++							RALINK_RSTCTRL &= ~val;	\
++						else	\
++							RALINK_RSTCTRL |= val;	\
++					} while(0)
++#define RALINK_SYSCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
++#define RALINK_CLKCFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
++#define RALINK_RSTCTRL			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
++#define RALINK_GPIOMODE			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
++#define RALINK_PCIE_CLK_GEN		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
++#define RALINK_PCIE_CLK_GEN1		*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
++#define PPLL_CFG1			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
++#define PPLL_DRV			*(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
++//RALINK_SYSCFG1 bit
++#define RALINK_PCI_HOST_MODE_EN		(1<<7)
++#define RALINK_PCIE_RC_MODE_EN		(1<<8)
++//RALINK_RSTCTRL bit
++#define RALINK_PCIE_RST			(1<<23)
++#define RALINK_PCI_RST			(1<<24)
++//RALINK_CLKCFG1 bit
++#define RALINK_PCI_CLK_EN		(1<<19)
++#define RALINK_PCIE_CLK_EN		(1<<21)
++//RALINK_GPIOMODE bit
++#define PCI_SLOTx2			(1<<11)
++#define PCI_SLOTx1			(2<<11)
++//MTK PCIE PLL bit
++#define PDRV_SW_SET			(1<<31)
++#define LC_CKDRVPD_			(1<<19)
++
++#define MEMORY_BASE 0x0
++static int pcie_link_status = 0;
++
++#define PCI_ACCESS_READ_1  0
++#define PCI_ACCESS_READ_2  1
++#define PCI_ACCESS_READ_4  2
++#define PCI_ACCESS_WRITE_1 3
++#define PCI_ACCESS_WRITE_2 4
++#define PCI_ACCESS_WRITE_4 5
++
++static int pcie_irq[3];
++
++static int config_access(unsigned char access_type, struct pci_bus *bus,
++			unsigned int devfn, unsigned int where, u32 * data)
++{
++	unsigned int slot = PCI_SLOT(devfn);
++	u8 func = PCI_FUNC(devfn);
++	uint32_t address_reg, data_reg;
++	unsigned int address;
++
++	address_reg = RALINK_PCI_CONFIG_ADDR;
++	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++
++	address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++	MV_WRITE(address_reg, address);
++
++	switch(access_type) {
++	case PCI_ACCESS_WRITE_1:
++		MV_WRITE_8(data_reg+(where&0x3), *data);
++		break;
++	case PCI_ACCESS_WRITE_2:
++		MV_WRITE_16(data_reg+(where&0x3), *data);
++		break;
++	case PCI_ACCESS_WRITE_4:
++		MV_WRITE(data_reg, *data);
++		break;
++	case PCI_ACCESS_READ_1:
++		MV_READ_8( data_reg+(where&0x3), data);
++		break;
++	case PCI_ACCESS_READ_2:
++		MV_READ_16(data_reg+(where&0x3), data);
++		break;
++	case PCI_ACCESS_READ_4:
++		MV_READ(data_reg, data);
++		break;
++	default:
++		printk("no specify access type\n");
++		break;
++	}
++	return 0;
++}
++
++static int
++read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
++{
++	return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
++{
++	return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
++{
++	return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
++}
++
++static int
++write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
++{
++	if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
++		return -1;
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
++{
++	if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
++		return -1;
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++static int
++write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
++{
++	if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
++		return -1;
++
++	return PCIBIOS_SUCCESSFUL;
++}
++
++
++static int
++pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++	switch (size) {
++	case 1:
++		return read_config_byte(bus, devfn, where, (u8 *) val);
++	case 2:
++		return read_config_word(bus, devfn, where, (u16 *) val);
++	default:
++		return read_config_dword(bus, devfn, where, val);
++	}
++}
++
++static int
++pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++	switch (size) {
++	case 1:
++		return write_config_byte(bus, devfn, where, (u8) val);
++	case 2:
++		return write_config_word(bus, devfn, where, (u16) val);
++	default:
++		return write_config_dword(bus, devfn, where, val);
++	}
++}
++
++struct pci_ops mt7621_pci_ops= {
++	.read		=  pci_config_read,
++	.write		= pci_config_write,
++};
++
++static struct resource mt7621_res_pci_mem1 = {
++	.name		= "PCI MEM1",
++	.start		= RALINK_PCI_MM_MAP_BASE,
++	.end		= (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
++	.flags		= IORESOURCE_MEM,
++};
++static struct resource mt7621_res_pci_io1 = {
++	.name		= "PCI I/O1",
++	.start		= RALINK_PCI_IO_MAP_BASE,
++	.end		= (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
++	.flags		= IORESOURCE_IO,
++};
++
++static struct pci_controller mt7621_controller = {
++	.pci_ops	= &mt7621_pci_ops,
++	.mem_resource	= &mt7621_res_pci_mem1,
++	.io_resource	= &mt7621_res_pci_io1,
++	.mem_offset	= 0x00000000UL,
++	.io_offset	= 0x00000000UL,
++	.io_map_base	= 0xa0000000,
++};
++
++static void
++read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
++{
++	unsigned int address_reg, data_reg, address;
++
++	address_reg = RALINK_PCI_CONFIG_ADDR;
++        data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++        MV_WRITE(address_reg, address);
++        MV_READ(data_reg, val);
++	return;
++}
++
++static void
++write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
++{
++	unsigned int address_reg, data_reg, address;
++
++	address_reg = RALINK_PCI_CONFIG_ADDR;
++	data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
++	address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
++	MV_WRITE(address_reg, address);
++	MV_WRITE(data_reg, val);
++	return;
++}
++
++
++int
++pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	u16 cmd;
++	u32 val;
++	int irq = 0;
++
++	if ((dev->bus->number == 0) && (slot == 0)) {
++		write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++		read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++		printk("BAR0 at slot 0 = %x\n", val);
++		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++	} else if((dev->bus->number == 0) && (slot == 0x1)) {
++		write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++		read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++		printk("BAR0 at slot 1 = %x\n", val);
++		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++	} else if((dev->bus->number == 0) && (slot == 0x2)) {
++		write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
++		read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
++		printk("BAR0 at slot 2 = %x\n", val);
++		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
++		switch (pcie_link_status) {
++		case 2:
++		case 6:
++			irq = RALINK_INT_PCIE1;
++			break;
++		case 4:
++			irq = RALINK_INT_PCIE2;
++			break;
++		default:
++			irq = RALINK_INT_PCIE0;
++		}
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else if ((dev->bus->number == 2) && (slot == 0x0)) {
++		switch (pcie_link_status) {
++		case 5:
++		case 6:
++			irq = RALINK_INT_PCIE2;
++			break;
++		default:
++			irq = RALINK_INT_PCIE1;
++		}
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else if ((dev->bus->number == 2) && (slot == 0x1)) {
++		switch (pcie_link_status) {
++		case 5:
++		case 6:
++			irq = RALINK_INT_PCIE2;
++			break;
++		default:
++			irq = RALINK_INT_PCIE1;
++		}
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else if ((dev->bus->number ==3) && (slot == 0x0)) {
++		irq = RALINK_INT_PCIE2;
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else if ((dev->bus->number ==3) && (slot == 0x1)) {
++		irq = RALINK_INT_PCIE2;
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else if ((dev->bus->number ==3) && (slot == 0x2)) {
++		irq = RALINK_INT_PCIE2;
++		printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
++	} else {
++		printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
++		return 0;
++	}
++
++	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);  //configure cache line size 0x14
++	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF);  //configure latency timer 0x10
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
++	return irq;
++}
++
++void
++set_pcie_phy(u32 *addr, int start_b, int bits, int val)
++{
++//	printk("0x%p:", addr);
++//	printk(" %x", *addr);
++	*(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
++	*(unsigned int *)(addr) |= val << start_b;
++//	printk(" -> %x\n", *addr);
++}
++
++void
++bypass_pipe_rst(void)
++{
++#if defined (CONFIG_PCIE_PORT0)
++	/* PCIe Port 0 */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	/* PCIe Port 1 */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	/* PCIe Port 2 */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01);	// rg_pe1_pipe_rst_b
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c),  4, 1, 0x01);	// rg_pe1_pipe_cmd_frc[4]
++#endif
++}
++
++void
++set_phy_for_ssc(void)
++{
++	unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
++
++	reg = (reg >> 6) & 0x7;
++#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
++	/* Set PCIe Port0 & Port1 PHY to disable SSC */
++	/* Debug Xtal Type */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 1 enable control
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 1 disable
++	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
++		printk("***** Xtal 40MHz *****\n");
++	} else {			// 25MHz | 20MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
++		if (reg >= 6) { 	
++			printk("***** Xtal 25MHz *****\n");
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
++		} else {
++			printk("***** Xtal 20MHz *****\n");
++		}
++	}
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
++	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
++	}
++	/* Enable PHY and disable force mode */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 1 enable
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 1 disable control
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	/* Set PCIe Port2 PHY to disable SSC */
++	/* Debug Xtal Type */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  8, 1, 0x01);	// rg_pe1_frc_h_xtal_type
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  9, 2, 0x00);	// rg_pe1_h_xtal_type
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x01);	// rg_pe1_frc_phy_en               //Force Port 0 enable control
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x00);	// rg_pe1_phy_en                   //Port 0 disable
++	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x01);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
++	} else {			// 25MHz | 20MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x00);	// RG_PE1_H_PLL_PREDIV             //Pre-divider ratio (for host mode)
++		if (reg >= 6) { 	// 25MHz Xtal
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc),  4, 2, 0x01);	// RG_PE1_H_PLL_FBKSEL             //Feedback clock select
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c),  0,31, 0x18000000);	// RG_PE1_H_LCDDS_PCW_NCPO         //DDS NCPO PCW (for host mode)
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4),  0,16, 0x18d);	// RG_PE1_H_LCDDS_SSC_PRD          //DDS SSC dither period control
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8),  0,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA        //DDS SSC dither amplitude control
++			set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a);	// RG_PE1_H_LCDDS_SSC_DELTA1       //DDS SSC dither amplitude control for initial
++		}
++	}
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0),  5, 1, 0x01);	// RG_PE1_LCDDS_CLK_PH_INV         //DDS clock inversion
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02);	// RG_PE1_H_PLL_BC                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06);	// RG_PE1_H_PLL_BP                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02);	// RG_PE1_H_PLL_IR                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  8, 4, 0x01);	// RG_PE1_H_PLL_IC                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00);	// RG_PE1_H_PLL_BR                 
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  1, 3, 0x02);	// RG_PE1_PLL_DIVEN                
++	if(reg <= 5 && reg >= 3) { 	// 40MHz Xtal
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  6, 2, 0x01);	// rg_pe1_mstckdiv		//value of da_pe1_mstckdiv when force mode enable
++		set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  5, 1, 0x01);	// rg_pe1_frc_mstckdiv          //force mode enable of da_pe1_mstckdiv      
++	}
++	/* Enable PHY and disable force mode */
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x01);	// rg_pe1_phy_en                   //Port 0 enable
++	set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x00);	// rg_pe1_frc_phy_en               //Force Port 0 disable control
++#endif
++}
++
++void setup_cm_memory_region(struct resource *mem_resource)
++{
++	resource_size_t mask;
++	if (mips_cps_numiocu(0)) {
++		/* FIXME: hardware doesn't accept mask values with 1s after
++		   0s (e.g. 0xffef), so it would be great to warn if that's
++		   about to happen */
++		mask = ~(mem_resource->end - mem_resource->start);
++
++		write_gcr_reg1_base(mem_resource->start);
++		write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
++		printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n",
++		       read_gcr_reg1_base(),
++		       read_gcr_reg1_mask());
++	}
++}
++
++static int mt7621_pci_probe(struct platform_device *pdev)
++{
++	unsigned long val = 0;
++	int i;
++
++	for (i = 0; i < 3; i++)
++		pcie_irq[i] = irq_of_parse_and_map(pdev->dev.of_node, i);
++
++	iomem_resource.start = 0;
++	iomem_resource.end= ~0;
++	ioport_resource.start= 0;
++	ioport_resource.end = ~0;
++
++#if defined (CONFIG_PCIE_PORT0)
++	val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	val |= RALINK_PCIE2_RST;
++#endif
++	ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
++	printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
++	*(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
++	*(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
++	mdelay(100);
++	*(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
++	mdelay(100);
++	*(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7);		// clear DATA
++
++	mdelay(100);
++#else
++	*(unsigned int *)(0xbe000060) &= ~0x00000c00;
++#endif
++#if defined (CONFIG_PCIE_PORT0)
++	val = RALINK_PCIE0_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	val |= RALINK_PCIE1_RST;
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	val |= RALINK_PCIE2_RST;
++#endif
++	DEASSERT_SYSRST_PCIE(val);
++	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++
++	if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
++		bypass_pipe_rst();
++	set_phy_for_ssc();
++	printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
++
++#if defined (CONFIG_PCIE_PORT0)
++	read_config(0, 0, 0, 0x70c, &val);
++	printk("Port 0 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	read_config(0, 1, 0, 0x70c, &val);
++	printk("Port 1 N_FTS = %x\n", (unsigned int)val);
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	read_config(0, 2, 0, 0x70c, &val);
++	printk("Port 2 N_FTS = %x\n", (unsigned int)val);
++#endif
++
++	RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
++	RALINK_SYSCFG1 &= ~(0x30);
++	RALINK_SYSCFG1 |= (2<<4);
++	RALINK_PCIE_CLK_GEN &= 0x7fffffff;
++	RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
++	RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
++	RALINK_PCIE_CLK_GEN |= 0x80000000;
++	mdelay(50);
++	RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
++	
++
++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */  /*chhung*/
++	*(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;		// set DATA
++	mdelay(100);
++#else
++	RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
++#endif
++	mdelay(500);
++
++
++	mdelay(500);
++#if defined (CONFIG_PCIE_PORT0)
++	if(( RALINK_PCI0_STATUS & 0x1) == 0)
++	{
++		printk("PCIE0 no card, disable it(RST&CLK)\n");
++		ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
++		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
++		pcie_link_status &= ~(1<<0);
++	} else {
++		pcie_link_status |= 1<<0;
++		RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
++	}
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	if(( RALINK_PCI1_STATUS & 0x1) == 0)
++	{
++		printk("PCIE1 no card, disable it(RST&CLK)\n");
++		ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
++		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
++		pcie_link_status &= ~(1<<1);
++	} else {
++		pcie_link_status |= 1<<1;
++		RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
++	}
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	if (( RALINK_PCI2_STATUS & 0x1) == 0) {
++		printk("PCIE2 no card, disable it(RST&CLK)\n");
++		ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
++		RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
++		pcie_link_status &= ~(1<<2);
++	} else {
++		pcie_link_status |= 1<<2;
++		RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
++	}
++#endif
++	if (pcie_link_status == 0)
++		return 0;
++
++/*
++pcie(2/1/0) link status	pcie2_num	pcie1_num	pcie0_num
++3'b000			x		x		x
++3'b001			x		x		0
++3'b010			x		0		x
++3'b011			x		1		0
++3'b100			0		x		x
++3'b101			1		x		0
++3'b110			1		0		x
++3'b111			2		1		0
++*/
++	switch(pcie_link_status) {
++	case 2:
++		RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
++		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
++		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
++		break;
++	case 4:
++		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++		RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;	//port0
++		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
++		RALINK_PCI_PCICFG_ADDR |= 0x0 << 24;	//port2
++		break;
++	case 5:
++		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++		RALINK_PCI_PCICFG_ADDR |= 0x0 << 16;	//port0
++		RALINK_PCI_PCICFG_ADDR |= 0x2 << 20;	//port1
++		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
++		break;
++	case 6:
++		RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
++		RALINK_PCI_PCICFG_ADDR |= 0x2 << 16;	//port0
++		RALINK_PCI_PCICFG_ADDR |= 0x0 << 20;	//port1
++		RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;	//port2
++		break;
++	}
++	printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
++	//printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
++
++/*
++	ioport_resource.start = mt7621_res_pci_io1.start;
++  	ioport_resource.end = mt7621_res_pci_io1.end;
++*/
++
++	RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
++	RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
++
++#if defined (CONFIG_PCIE_PORT0)
++	//PCIe0
++	if((pcie_link_status & 0x1) != 0) {
++		RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
++		RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
++		RALINK_PCI0_CLASS = 0x06040001;
++		printk("PCIE0 enabled\n");
++	}
++#endif
++#if defined (CONFIG_PCIE_PORT1)
++	//PCIe1
++	if ((pcie_link_status & 0x2) != 0) {
++		RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
++		RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
++		RALINK_PCI1_CLASS = 0x06040001;
++		printk("PCIE1 enabled\n");
++	}
++#endif
++#if defined (CONFIG_PCIE_PORT2)
++	//PCIe2
++	if ((pcie_link_status & 0x4) != 0) {
++		RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001;	//open 7FFF:2G; ENABLE
++		RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
++		RALINK_PCI2_CLASS = 0x06040001;
++		printk("PCIE2 enabled\n");
++	}
++#endif
++
++
++	switch(pcie_link_status) {
++	case 7:
++		read_config(0, 2, 0, 0x4, &val);
++		write_config(0, 2, 0, 0x4, val|0x4);
++		// write_config(0, 1, 0, 0x4, val|0x7);
++		read_config(0, 2, 0, 0x70c, &val);
++		val &= ~(0xff)<<8;
++		val |= 0x50<<8;
++		write_config(0, 2, 0, 0x70c, val);
++	case 3:
++	case 5:
++	case 6:
++		read_config(0, 1, 0, 0x4, &val);
++		write_config(0, 1, 0, 0x4, val|0x4);
++		// write_config(0, 1, 0, 0x4, val|0x7);
++		read_config(0, 1, 0, 0x70c, &val);
++		val &= ~(0xff)<<8;
++		val |= 0x50<<8;
++		write_config(0, 1, 0, 0x70c, val);
++	default:
++		read_config(0, 0, 0, 0x4, &val);
++		write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
++		// write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
++		read_config(0, 0, 0, 0x70c, &val);
++		val &= ~(0xff)<<8;
++		val |= 0x50<<8;
++		write_config(0, 0, 0, 0x70c, val);
++	}
++
++	pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node);
++	setup_cm_memory_region(mt7621_controller.mem_resource);
++	register_pci_controller(&mt7621_controller);
++	return 0;
++
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
++
++static const struct of_device_id mt7621_pci_ids[] = {
++	{ .compatible = "mediatek,mt7621-pci" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
++
++static struct platform_driver mt7621_pci_driver = {
++	.probe = mt7621_pci_probe,
++	.driver = {
++		.name = "mt7621-pci",
++		.owner = THIS_MODULE,
++		.of_match_table = of_match_ptr(mt7621_pci_ids),
++	},
++};
++
++static int __init mt7621_pci_init(void)
++{
++	return platform_driver_register(&mt7621_pci_driver);
++}
++
++arch_initcall(mt7621_pci_init);