bcm53xx: use Broadcom's proposed SMP implementation

This replaces our SMP implementation with a very similar version which
is Broadcom currently trying to get into mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47247

3 files changed, 685 insertions, 314 deletions

diff --git a/target/linux/bcm53xx/patches-4.1/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.1/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
new file mode 100644
index 0000000..5e3bd77
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.1/130-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
@@ -0,0 +1,635 @@
+From a0ad1511d5805b95ac4c454d7904c670a1696055 Mon Sep 17 00:00:00 2001
+From: Kapil Hali <kapilh@broadcom.com>
+Date: Wed, 14 Oct 2015 13:47:00 -0400
+Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom NSP
+
+Add SMP support for Broadcom's Northstar Plus SoC,
+cpu enable method and pen_release procedures. This
+changes also consolidates iProc family's - BCM NSP
+and BCM Kona, SMP handling in a common file.
+
+Northstar Plus SoC is based on ARM Cortex-A9
+revision r3p0 which requires configuration for ARM
+Errata 764369 for SMP. This change adds the needed
+configuration option.
+
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ arch/arm/mach-bcm/Makefile   |   2 +-
+ arch/arm/mach-bcm/bcm_nsp.h  |  19 +++
+ arch/arm/mach-bcm/headsmp.S  |  37 +++++
+ arch/arm/mach-bcm/kona_smp.c | 202 ---------------------------
+ arch/arm/mach-bcm/platsmp.c  | 326 +++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 383 insertions(+), 203 deletions(-)
+ create mode 100644 arch/arm/mach-bcm/bcm_nsp.h
+ create mode 100644 arch/arm/mach-bcm/headsmp.S
+ delete mode 100644 arch/arm/mach-bcm/kona_smp.c
+ create mode 100644 arch/arm/mach-bcm/platsmp.c
+
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bc
+ obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
+ 
+ # BCM281XX and BCM21664 SMP support
+-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
++obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
+ 
+ # BCM281XX and BCM21664 L2 cache control
+ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
+--- /dev/null
++++ b/arch/arm/mach-bcm/bcm_nsp.h
+@@ -0,0 +1,19 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __BCM_NSP_H
++#define __BCM_NSP_H
++
++extern void nsp_secondary_startup(void);
++
++#endif /* __BCM_NSP_H */
+--- /dev/null
++++ b/arch/arm/mach-bcm/headsmp.S
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/linkage.h>
++
++/*
++ * iProc specific entry point for secondary CPUs.  This provides
++ * a "holding pen" into which all secondary cores are held until
++ * we are ready for them to initialise.
++ */
++ENTRY(nsp_secondary_startup)
++	mrc     p15, 0, r0, c0, c0, 5
++	and     r0, r0, #15
++	adr     r4, 1f
++	ldmia   r4, {r5, r6}
++	sub     r4, r4, r5
++	add     r6, r6, r4
++pen:	ldr     r7, [r6]
++	cmp     r7, r0
++	bne     pen
++
++	b    secondary_startup
++
++1:	.long   .
++	.long   pen_release
++
++ENDPROC(nsp_secondary_startup)
+--- a/arch/arm/mach-bcm/kona_smp.c
++++ /dev/null
+@@ -1,202 +0,0 @@
+-/*
+- * Copyright (C) 2014 Broadcom Corporation
+- * Copyright 2014 Linaro Limited
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation version 2.
+- *
+- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+- * kind, whether express or implied; without even the implied warranty
+- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/errno.h>
+-#include <linux/io.h>
+-#include <linux/of.h>
+-#include <linux/sched.h>
+-
+-#include <asm/smp.h>
+-#include <asm/smp_plat.h>
+-#include <asm/smp_scu.h>
+-
+-/* Size of mapped Cortex A9 SCU address space */
+-#define CORTEX_A9_SCU_SIZE	0x58
+-
+-#define SECONDARY_TIMEOUT_NS	NSEC_PER_MSEC	/* 1 msec (in nanoseconds) */
+-#define BOOT_ADDR_CPUID_MASK	0x3
+-
+-/* Name of device node property defining secondary boot register location */
+-#define OF_SECONDARY_BOOT	"secondary-boot-reg"
+-
+-/* I/O address of register used to coordinate secondary core startup */
+-static u32	secondary_boot;
+-
+-/*
+- * Enable the Cortex A9 Snoop Control Unit
+- *
+- * By the time this is called we already know there are multiple
+- * cores present.  We assume we're running on a Cortex A9 processor,
+- * so any trouble getting the base address register or getting the
+- * SCU base is a problem.
+- *
+- * Return 0 if successful or an error code otherwise.
+- */
+-static int __init scu_a9_enable(void)
+-{
+-	unsigned long config_base;
+-	void __iomem *scu_base;
+-
+-	if (!scu_a9_has_base()) {
+-		pr_err("no configuration base address register!\n");
+-		return -ENXIO;
+-	}
+-
+-	/* Config base address register value is zero for uniprocessor */
+-	config_base = scu_a9_get_base();
+-	if (!config_base) {
+-		pr_err("hardware reports only one core\n");
+-		return -ENOENT;
+-	}
+-
+-	scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+-	if (!scu_base) {
+-		pr_err("failed to remap config base (%lu/%u) for SCU\n",
+-			config_base, CORTEX_A9_SCU_SIZE);
+-		return -ENOMEM;
+-	}
+-
+-	scu_enable(scu_base);
+-
+-	iounmap(scu_base);	/* That's the last we'll need of this */
+-
+-	return 0;
+-}
+-
+-static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+-{
+-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+-	struct device_node *node;
+-	int ret;
+-
+-	BUG_ON(secondary_boot);		/* We're called only once */
+-
+-	/*
+-	 * This function is only called via smp_ops->smp_prepare_cpu().
+-	 * That only happens if a "/cpus" device tree node exists
+-	 * and has an "enable-method" property that selects the SMP
+-	 * operations defined herein.
+-	 */
+-	node = of_find_node_by_path("/cpus");
+-	BUG_ON(!node);
+-
+-	/*
+-	 * Our secondary enable method requires a "secondary-boot-reg"
+-	 * property to specify a register address used to request the
+-	 * ROM code boot a secondary code.  If we have any trouble
+-	 * getting this we fall back to uniprocessor mode.
+-	 */
+-	if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
+-		pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
+-			node->name);
+-		ret = -ENOENT;		/* Arrange to disable SMP */
+-		goto out;
+-	}
+-
+-	/*
+-	 * Enable the SCU on Cortex A9 based SoCs.  If -ENOENT is
+-	 * returned, the SoC reported a uniprocessor configuration.
+-	 * We bail on any other error.
+-	 */
+-	ret = scu_a9_enable();
+-out:
+-	of_node_put(node);
+-	if (ret) {
+-		/* Update the CPU present map to reflect uniprocessor mode */
+-		BUG_ON(ret != -ENOENT);
+-		pr_warn("disabling SMP\n");
+-		init_cpu_present(&only_cpu_0);
+-	}
+-}
+-
+-/*
+- * The ROM code has the secondary cores looping, waiting for an event.
+- * When an event occurs each core examines the bottom two bits of the
+- * secondary boot register.  When a core finds those bits contain its
+- * own core id, it performs initialization, including computing its boot
+- * address by clearing the boot register value's bottom two bits.  The
+- * core signals that it is beginning its execution by writing its boot
+- * address back to the secondary boot register, and finally jumps to
+- * that address.
+- *
+- * So to start a core executing we need to:
+- * - Encode the (hardware) CPU id with the bottom bits of the secondary
+- *   start address.
+- * - Write that value into the secondary boot register.
+- * - Generate an event to wake up the secondary CPU(s).
+- * - Wait for the secondary boot register to be re-written, which
+- *   indicates the secondary core has started.
+- */
+-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+-{
+-	void __iomem *boot_reg;
+-	phys_addr_t boot_func;
+-	u64 start_clock;
+-	u32 cpu_id;
+-	u32 boot_val;
+-	bool timeout = false;
+-
+-	cpu_id = cpu_logical_map(cpu);
+-	if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
+-		pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
+-		return -EINVAL;
+-	}
+-
+-	if (!secondary_boot) {
+-		pr_err("required secondary boot register not specified\n");
+-		return -EINVAL;
+-	}
+-
+-	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+-	if (!boot_reg) {
+-		pr_err("unable to map boot register for cpu %u\n", cpu_id);
+-		return -ENOSYS;
+-	}
+-
+-	/*
+-	 * Secondary cores will start in secondary_startup(),
+-	 * defined in "arch/arm/kernel/head.S"
+-	 */
+-	boot_func = virt_to_phys(secondary_startup);
+-	BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
+-	BUG_ON(boot_func > (phys_addr_t)U32_MAX);
+-
+-	/* The core to start is encoded in the low bits */
+-	boot_val = (u32)boot_func | cpu_id;
+-	writel_relaxed(boot_val, boot_reg);
+-
+-	sev();
+-
+-	/* The low bits will be cleared once the core has started */
+-	start_clock = local_clock();
+-	while (!timeout && readl_relaxed(boot_reg) == boot_val)
+-		timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
+-
+-	iounmap(boot_reg);
+-
+-	if (!timeout)
+-		return 0;
+-
+-	pr_err("timeout waiting for cpu %u to start\n", cpu_id);
+-
+-	return -ENOSYS;
+-}
+-
+-static struct smp_operations bcm_smp_ops __initdata = {
+-	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
+-	.smp_boot_secondary	= bcm_boot_secondary,
+-};
+-CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
+-			&bcm_smp_ops);
+--- /dev/null
++++ b/arch/arm/mach-bcm/platsmp.c
+@@ -0,0 +1,326 @@
++/*
++ * Copyright (C) 2014-2015 Broadcom Corporation
++ * Copyright 2014 Linaro Limited
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/cpumask.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/of.h>
++#include <linux/sched.h>
++#include <linux/smp.h>
++
++#include <asm/cacheflush.h>
++#include <asm/smp.h>
++#include <asm/smp_plat.h>
++#include <asm/smp_scu.h>
++
++#include "bcm_nsp.h"
++
++/* Size of mapped Cortex A9 SCU address space */
++#define CORTEX_A9_SCU_SIZE	0x58
++
++#define SECONDARY_TIMEOUT_NS	NSEC_PER_MSEC	/* 1 msec (in nanoseconds) */
++#define BOOT_ADDR_CPUID_MASK	0x3
++
++/* Name of device node property defining secondary boot register location */
++#define OF_SECONDARY_BOOT	"secondary-boot-reg"
++
++/* I/O address of register used to coordinate secondary core startup */
++static u32	secondary_boot;
++
++static DEFINE_SPINLOCK(boot_lock);
++
++/*
++ * Write pen_release in a way that is guaranteed to be visible to all
++ * observers, irrespective of whether they're taking part in coherency
++ * or not.  This is necessary for the hotplug code to work reliably.
++ */
++static void write_pen_release(int val)
++{
++	pen_release = val;
++	/*
++	 * Ensure write to pen_release is visible to the other cores,
++	 * here - primary core
++	 */
++	smp_wmb();
++	sync_cache_w(&pen_release);
++}
++
++/*
++ * Enable the Cortex A9 Snoop Control Unit
++ *
++ * By the time this is called we already know there are multiple
++ * cores present.  We assume we're running on a Cortex A9 processor,
++ * so any trouble getting the base address register or getting the
++ * SCU base is a problem.
++ *
++ * Return 0 if successful or an error code otherwise.
++ */
++static int __init scu_a9_enable(void)
++{
++	unsigned long config_base;
++	void __iomem *scu_base;
++
++	if (!scu_a9_has_base()) {
++		pr_err("no configuration base address register!\n");
++		return -ENXIO;
++	}
++
++	/* Config base address register value is zero for uniprocessor */
++	config_base = scu_a9_get_base();
++	if (!config_base) {
++		pr_err("hardware reports only one core\n");
++		return -ENOENT;
++	}
++
++	scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
++	if (!scu_base) {
++		pr_err("failed to remap config base (%lu/%u) for SCU\n",
++			config_base, CORTEX_A9_SCU_SIZE);
++		return -ENOMEM;
++	}
++
++	scu_enable(scu_base);
++
++	iounmap(scu_base);	/* That's the last we'll need of this */
++
++	return 0;
++}
++
++static int nsp_write_lut(void (*secondary_startup) (void))
++{
++	void __iomem *sku_rom_lut;
++	phys_addr_t secondary_startup_phy;
++
++	if (!secondary_boot) {
++		pr_warn("required secondary boot register not specified\n");
++		return -EINVAL;
++	}
++
++	sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot,
++						sizeof(secondary_boot));
++	if (!sku_rom_lut) {
++		pr_warn("unable to ioremap SKU-ROM LUT register\n");
++		return -ENOMEM;
++	}
++
++	secondary_startup_phy = virt_to_phys(secondary_startup);
++	BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
++
++	writel_relaxed(secondary_startup_phy, sku_rom_lut);
++	/*
++	 * Ensure the write is visible to the secondary core.
++	 */
++	smp_wmb();
++
++	iounmap(sku_rom_lut);
++
++	return 0;
++}
++
++static void nsp_secondary_init(unsigned int cpu)
++{
++	/*
++	 * Let the primary cpu know we are out of holding pen.
++	 */
++	write_pen_release(-1);
++
++	/*
++	 * Synchronise with the boot thread.
++	 */
++	spin_lock(&boot_lock);
++	spin_unlock(&boot_lock);
++}
++
++static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
++{
++	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
++	struct device_node *node;
++	int ret;
++
++	BUG_ON(secondary_boot);		/* We're called only once */
++
++	/*
++	 * This function is only called via smp_ops->smp_prepare_cpu().
++	 * That only happens if a "/cpus" device tree node exists
++	 * and has an "enable-method" property that selects the SMP
++	 * operations defined herein.
++	 */
++	node = of_find_node_by_path("/cpus");
++	BUG_ON(!node);
++
++	/*
++	 * Our secondary enable method requires a "secondary-boot-reg"
++	 * property to specify a register address used to request the
++	 * ROM code boot a secondary core.  If we have any trouble
++	 * getting this we fall back to uniprocessor mode.
++	 */
++	if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
++		pr_warn("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
++			node->name);
++		ret = -ENOENT;		/* Arrange to disable SMP */
++		goto out;
++	}
++
++	/*
++	 * Enable the SCU on Cortex A9 based SoCs.  If -ENOENT is
++	 * returned, the SoC reported a uniprocessor configuration.
++	 * We bail on any other error.
++	 */
++	ret = scu_a9_enable();
++out:
++	of_node_put(node);
++	if (ret) {
++		/* Update the CPU present map to reflect uniprocessor mode */
++		pr_warn("disabling SMP\n");
++		init_cpu_present(&only_cpu_0);
++	}
++}
++
++/*
++ * The ROM code has the secondary cores looping, waiting for an event.
++ * When an event occurs each core examines the bottom two bits of the
++ * secondary boot register.  When a core finds those bits contain its
++ * own core id, it performs initialization, including computing its boot
++ * address by clearing the boot register value's bottom two bits.  The
++ * core signals that it is beginning its execution by writing its boot
++ * address back to the secondary boot register, and finally jumps to
++ * that address.
++ *
++ * So to start a core executing we need to:
++ * - Encode the (hardware) CPU id with the bottom bits of the secondary
++ *   start address.
++ * - Write that value into the secondary boot register.
++ * - Generate an event to wake up the secondary CPU(s).
++ * - Wait for the secondary boot register to be re-written, which
++ *   indicates the secondary core has started.
++ */
++static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++	void __iomem *boot_reg;
++	phys_addr_t boot_func;
++	u64 start_clock;
++	u32 cpu_id;
++	u32 boot_val;
++	bool timeout = false;
++
++	cpu_id = cpu_logical_map(cpu);
++	if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
++		pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
++		return -EINVAL;
++	}
++
++	if (!secondary_boot) {
++		pr_err("required secondary boot register not specified\n");
++		return -EINVAL;
++	}
++
++	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
++	if (!boot_reg) {
++		pr_err("unable to map boot register for cpu %u\n", cpu_id);
++		return -ENOMEM;
++	}
++
++	/*
++	 * Secondary cores will start in secondary_startup(),
++	 * defined in "arch/arm/kernel/head.S"
++	 */
++	boot_func = virt_to_phys(secondary_startup);
++	BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
++	BUG_ON(boot_func > (phys_addr_t)U32_MAX);
++
++	/* The core to start is encoded in the low bits */
++	boot_val = (u32)boot_func | cpu_id;
++	writel_relaxed(boot_val, boot_reg);
++
++	sev();
++
++	/* The low bits will be cleared once the core has started */
++	start_clock = local_clock();
++	while (!timeout && readl_relaxed(boot_reg) == boot_val)
++		timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
++
++	iounmap(boot_reg);
++
++	if (!timeout)
++		return 0;
++
++	pr_err("timeout waiting for cpu %u to start\n", cpu_id);
++
++	return -ENXIO;
++}
++
++static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++	unsigned long timeout;
++	int ret;
++
++	/*
++	 * After wake up, secondary core branches to the startup
++	 * address programmed at SKU ROM LUT location.
++	 */
++	ret = nsp_write_lut(nsp_secondary_startup);
++	if (ret) {
++		pr_err("unable to write startup addr to SKU ROM LUT\n");
++		goto out;
++	}
++
++	/*
++	 * The secondary processor is waiting to be released from
++	 * the holding pen - release it, then wait for it to flag
++	 * that it has been released by resetting pen_release.
++	 */
++	spin_lock(&boot_lock);
++
++	write_pen_release(cpu_logical_map(cpu));
++	/*
++	 * Send an Event to wake up the secondary core which is in
++	 * WFE state. Updated pen_release should also be visible to
++	 * the secondary core.
++	 */
++	dsb_sev();
++
++	timeout = jiffies + (1 * HZ);
++	while (time_before(jiffies, timeout)) {
++		/* Make sure loads on other CPU is visible */
++		smp_rmb();
++		if (pen_release == -1)
++			break;
++
++		udelay(10);
++	}
++
++	spin_unlock(&boot_lock);
++
++	ret = pen_release != -1 ? -ENXIO : 0;
++
++out:
++	return ret;
++}
++
++static struct smp_operations bcm_smp_ops __initdata = {
++	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
++	.smp_boot_secondary	= kona_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
++			&bcm_smp_ops);
++
++struct smp_operations nsp_smp_ops __initdata = {
++	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
++	.smp_secondary_init	= nsp_secondary_init,
++	.smp_boot_secondary	= nsp_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch b/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
new file mode 100644
index 0000000..4cd0473
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.1/131-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
@@ -0,0 +1,50 @@
+From ddbf0ad85be06948dd214c7beb7b315ef2749e65 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 14:14:10 -0400
+Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom 4708
+
+ARM: BCM: Add SMP support for Broadcom 4708
+
+Add SMP support for Broadcom's 4708 SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/bcm4708.dtsi | 2 ++
+ arch/arm/mach-bcm/Kconfig      | 2 ++
+ arch/arm/mach-bcm/Makefile     | 3 +++
+ 3 files changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708.dtsi
++++ b/arch/arm/boot/dts/bcm4708.dtsi
+@@ -15,6 +15,8 @@
+ 	cpus {
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
++		enable-method = "brcm,bcm-nsp-smp";
++		secondary-boot-reg = <0xffff0400>;
+ 
+ 		cpu@0 {
+ 			device_type = "cpu";
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -38,6 +38,8 @@ config ARCH_BCM_CYGNUS
+ config ARCH_BCM_5301X
+ 	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ 	select ARCH_BCM_IPROC
++	select ARM_ERRATA_764369 if SMP
++	select HAVE_SMP
+ 	help
+ 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+ 
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -36,6 +36,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2
+ 
+ # BCM5301X
+ obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
++ifeq ($(CONFIG_ARCH_BCM_5301X),y)
++obj-$(CONFIG_SMP)		+= headsmp.o platsmp.o
++endif
+ 
+ # BCM63XXx
+ obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
diff --git a/target/linux/bcm53xx/patches-4.1/131-ARM-BCM5301X-Implement-SMP-support.patch b/target/linux/bcm53xx/patches-4.1/131-ARM-BCM5301X-Implement-SMP-support.patch
deleted file mode 100644
index bdc7dea..0000000
--- a/target/linux/bcm53xx/patches-4.1/131-ARM-BCM5301X-Implement-SMP-support.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-From 707ab07695ea8953a5bb56512e7bb38ca79c5c38 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 19 Feb 2015 23:27:59 +0100
-Subject: [PATCH V2] ARM: BCM5301X: Implement SMP support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-V2: Change code after receiving Florian's comments:
-    1) Use "mmio-sram"
-    2) Remove commented out ASM call
-    3) Fix coding style in ASM
-    4) Simplify finding OF node
----
- Documentation/devicetree/bindings/arm/bcm4708.txt |  24 ++++
- Documentation/devicetree/bindings/arm/cpus.txt    |   1 +
- arch/arm/boot/dts/bcm4708.dtsi                    |  13 ++
- arch/arm/mach-bcm/Makefile                        |   3 +
- arch/arm/mach-bcm/bcm5301x_headsmp.S              |  45 ++++++
- arch/arm/mach-bcm/bcm5301x_smp.c                  | 158 ++++++++++++++++++++++
- 6 files changed, 244 insertions(+)
- create mode 100644 arch/arm/mach-bcm/bcm5301x_headsmp.S
- create mode 100644 arch/arm/mach-bcm/bcm5301x_smp.c
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
-@@ -6,3 +6,27 @@ Boards with the BCM4708 SoC shall have t
- Required root node property:
- 
- compatible = "brcm,bcm4708";
-+
-+Optional sub-node properties:
-+
-+compatible = "mmio-sram" for SRAM access with IO memory region
-+		This is needed for SMP-capable SoCs which use part of
-+		SRAM for storing location of code to be executed by the
-+		extra cores.
-+		SMP support requires another sub-node with compatible
-+		property "brcm,bcm4708-sysram".
-+
-+Example:
-+
-+	sysram@ffff0000 {
-+		compatible = "mmio-sram";
-+		reg = <0xffff0000 0x10000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0 0xffff0000 0x10000>;
-+
-+		smp-sysram@0 {
-+			compatible = "brcm,bcm4708-sysram";
-+			reg = <0x0 0x1000>;
-+		};
-+	};
---- a/Documentation/devicetree/bindings/arm/cpus.txt
-+++ b/Documentation/devicetree/bindings/arm/cpus.txt
-@@ -189,6 +189,7 @@ nodes to be present and contain the prop
- 			  can be one of:
- 			    "allwinner,sun6i-a31"
- 			    "arm,psci"
-+			    "brcm,bcm4708-smp"
- 			    "brcm,brahma-b15"
- 			    "marvell,armada-375-smp"
- 			    "marvell,armada-380-smp"
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -15,6 +15,7 @@
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
-+		enable-method = "brcm,bcm4708-smp";
- 
- 		cpu@0 {
- 			device_type = "cpu";
-@@ -31,4 +32,16 @@
- 		};
- 	};
- 
-+	sysram@ffff0000 {
-+		compatible = "mmio-sram";
-+		reg = <0xffff0000 0x10000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0 0xffff0000 0x10000>;
-+
-+		smp-sysram@0 {
-+			compatible = "brcm,bcm4708-sysram";
-+			reg = <0x0 0x1000>;
-+		};
-+	};
- };
---- a/arch/arm/mach-bcm/Makefile
-+++ b/arch/arm/mach-bcm/Makefile
-@@ -36,6 +36,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2
- 
- # BCM5301X
- obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
-+ifeq ($(CONFIG_SMP),y)
-+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm5301x_smp.o bcm5301x_headsmp.o
-+endif
- 
- # BCM63XXx
- obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
---- /dev/null
-+++ b/arch/arm/mach-bcm/bcm5301x_headsmp.S
-@@ -0,0 +1,45 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ *
-+ * Copyright (c) 2003 ARM Limited
-+ * All Rights Reserved
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/linkage.h>
-+
-+/*
-+ * BCM5301X specific entry point for secondary CPUs.
-+ */
-+ENTRY(bcm5301x_secondary_startup)
-+	mrc	p15, 0, r0, c0, c0, 5
-+	and	r0, r0, #15
-+	adr	r4, 1f
-+	ldmia	r4, {r5, r6}
-+	sub	r4, r4, r5
-+	add	r6, r6, r4
-+pen:	ldr	r7, [r6]
-+	cmp	r7, r0
-+	bne	pen
-+
-+	/*
-+	 * In case L1 cache has unpredictable contents at power-up
-+	 * clean its contents without flushing.
-+	 */
-+	bl      v7_invalidate_l1
-+
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c5, 0	/* Invalidate icache */
-+	dsb
-+	isb
-+
-+	/*
-+	 * we've been released from the holding pen: secondary_stack
-+	 * should now contain the SVC stack for this core
-+	 */
-+	b	secondary_startup
-+ENDPROC(bcm5301x_secondary_startup)
-+
-+	.align 2
-+1:	.long	.
-+	.long	pen_release
---- /dev/null
-+++ b/arch/arm/mach-bcm/bcm5301x_smp.c
-@@ -0,0 +1,158 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ *
-+ * Copyright (C) 2002 ARM Ltd.
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <asm/cacheflush.h>
-+#include <asm/delay.h>
-+#include <asm/smp_plat.h>
-+#include <asm/smp_scu.h>
-+
-+#include <linux/clockchips.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+
-+#define SOC_ROM_LUT_OFF		0x400
-+
-+extern void bcm5301x_secondary_startup(void);
-+
-+static void __cpuinit write_pen_release(int val)
-+{
-+	pen_release = val;
-+	smp_wmb();
-+	sync_cache_w(&pen_release);
-+}
-+
-+static DEFINE_SPINLOCK(boot_lock);
-+
-+static void __init bcm5301x_smp_secondary_set_entry(void (*entry_point)(void))
-+{
-+	void __iomem *sysram_base_addr = NULL;
-+	struct device_node *node;
-+
-+	node = of_find_compatible_node(NULL, NULL, "brcm,bcm4708-sysram");
-+	if (!of_device_is_available(node))
-+		return;
-+
-+	sysram_base_addr = of_iomap(node, 0);
-+	if (!sysram_base_addr) {
-+		pr_warn("Failed to map sysram\n");
-+		return;
-+	}
-+
-+	writel(virt_to_phys(entry_point), sysram_base_addr + SOC_ROM_LUT_OFF);
-+
-+	dsb_sev();	/* Exit WFI */
-+	mb();		/* make sure write buffer is drained */
-+
-+	iounmap(sysram_base_addr);
-+}
-+
-+static void __init bcm5301x_smp_prepare_cpus(unsigned int max_cpus)
-+{
-+	void __iomem *scu_base;
-+
-+	if (!scu_a9_has_base()) {
-+		pr_warn("Unknown SCU base\n");
-+		return;
-+	}
-+
-+	scu_base = ioremap((phys_addr_t)scu_a9_get_base(), SZ_256);
-+	if (!scu_base) {
-+		pr_err("Failed to remap SCU\n");
-+		return;
-+	}
-+
-+	/* Initialise the SCU */
-+	scu_enable(scu_base);
-+
-+	/* Let CPUs know where to start */
-+	bcm5301x_smp_secondary_set_entry(bcm5301x_secondary_startup);
-+
-+	iounmap(scu_base);
-+}
-+
-+static void __cpuinit bcm5301x_smp_secondary_init(unsigned int cpu)
-+{
-+	trace_hardirqs_off();
-+
-+	/*
-+	 * let the primary processor know we're out of the
-+	 * pen, then head off into the C entry point
-+	 */
-+	write_pen_release(-1);
-+
-+	/*
-+	 * Synchronise with the boot thread.
-+	 */
-+	spin_lock(&boot_lock);
-+	spin_unlock(&boot_lock);
-+}
-+
-+static int __cpuinit bcm5301x_smp_boot_secondary(unsigned int cpu,
-+						 struct task_struct *idle)
-+{
-+	unsigned long timeout;
-+
-+	/*
-+	 * set synchronisation state between this boot processor
-+	 * and the secondary one
-+	 */
-+	spin_lock(&boot_lock);
-+
-+	/*
-+	 * The secondary processor is waiting to be released from
-+	 * the holding pen - release it, then wait for it to flag
-+	 * that it has been released by resetting pen_release.
-+	 *
-+	 * Note that "pen_release" is the hardware CPU ID, whereas
-+	 * "cpu" is Linux's internal ID.
-+	 */
-+	write_pen_release(cpu_logical_map(cpu));
-+
-+	 /* Send the secondary CPU SEV */
-+	dsb_sev();
-+
-+	udelay(100);
-+
-+	/*
-+	 * Send the secondary CPU a soft interrupt, thereby causing
-+	 * the boot monitor to read the system wide flags register,
-+	 * and branch to the address found there.
-+	 */
-+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-+
-+	/*
-+	 * Timeout set on purpose in jiffies so that on slow processors
-+	 * that must also have low HZ it will wait longer.
-+	 */
-+	timeout = jiffies + (HZ * 10);
-+	while (time_before(jiffies, timeout)) {
-+		smp_rmb();
-+		if (pen_release == -1)
-+			break;
-+
-+		udelay(10);
-+	}
-+
-+	/*
-+	 * now the secondary core is starting up let it run its
-+	 * calibrations, then wait for it to finish
-+	 */
-+	spin_unlock(&boot_lock);
-+
-+	return pen_release != -1 ? -ENOSYS : 0;
-+}
-+
-+static struct smp_operations bcm5301x_smp_ops __initdata = {
-+	.smp_prepare_cpus	= bcm5301x_smp_prepare_cpus,
-+	.smp_secondary_init	= bcm5301x_smp_secondary_init,
-+	.smp_boot_secondary	= bcm5301x_smp_boot_secondary,
-+};
-+
-+CPU_METHOD_OF_DECLARE(bcm5301x_smp, "brcm,bcm4708-smp",
-+		      &bcm5301x_smp_ops);