netlogic: add XLR/XLP support

Add support for Broadcom/Netlogic XLR/XLP support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43037

7 files changed, 277 insertions, 0 deletions

diff --git a/target/linux/netlogic/Makefile b/target/linux/netlogic/Makefile
new file mode 100644
index 0000000..e3aa572
--- /dev/null
+++ b/target/linux/netlogic/Makefile
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips64
+BOARD:=netlogic
+BOARDNAME:=Broadcom/Netlogic XLP/XLR
+FEATURES:=squashfs jffs2 ext4 pci usb
+MAINTAINER:=Florian Fainelli <florian@openwrt.org>
+SUBTARGETS:=xlp xlr
+
+LINUX_VERSION:=3.14.16
+
+include $(INCLUDE_DIR)/target.mk
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/netlogic/config-default b/target/linux/netlogic/config-default
new file mode 100644
index 0000000..9ec7155
--- /dev/null
+++ b/target/linux/netlogic/config-default
@@ -0,0 +1,209 @@
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+CONFIG_BINFMT_ELF32=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BOOT_ELF32=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+# CONFIG_CYCLADES is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_DMA_COHERENT=y
+CONFIG_DTC=y
+CONFIG_E1000E=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OCORES=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISI is not set
+CONFIG_MIPS=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_N32=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLM_COMMON=y
+# CONFIG_NLM_MULTINODE is not set
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=32
+CONFIG_NR_CPUS_DEFAULT_32=y
+# CONFIG_N_HDLC is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
+CONFIG_PCI_STUB=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PM=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+CONFIG_PM_DEBUG=y
+CONFIG_PM_RUNTIME=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_PPS=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_KCORE=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+# CONFIG_ROCKETPORT is not set
+CONFIG_RPS=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+CONFIG_SYNC_R4K=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_GOV_STEP_WISE=y
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_STATS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
+CONFIG_XPS=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/netlogic/image/Makefile b/target/linux/netlogic/image/Makefile
new file mode 100644
index 0000000..6dde9b0
--- /dev/null
+++ b/target/linux/netlogic/image/Makefile
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/BuildKernel
+endef
+
+define Image/Build/squashfs
+    $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
+define Image/Build
+	$(call Image/Build/$(1))
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/netlogic/xlp/config-default b/target/linux/netlogic/xlp/config-default
new file mode 100644
index 0000000..eee7fb4
--- /dev/null
+++ b/target/linux/netlogic/xlp/config-default
@@ -0,0 +1,7 @@
+CONFIG_CPU_XLP=y
+CONFIG_DT_XLP_EVP=y
+CONFIG_DT_XLP_FVP=y
+CONFIG_DT_XLP_GVP=y
+CONFIG_DT_XLP_SVP=y
+CONFIG_NLM_XLP_BOARD=y
+CONFIG_SYS_HAS_CPU_XLP=y
diff --git a/target/linux/netlogic/xlp/target.mk b/target/linux/netlogic/xlp/target.mk
new file mode 100644
index 0000000..44c4460
--- /dev/null
+++ b/target/linux/netlogic/xlp/target.mk
@@ -0,0 +1,10 @@
+CPU_TYPE:=xlp
+CPU_FLAGS_xlp:=-march=xlp -mabi=64
+BOARDNAME:=xlp
+
+DEFAULT_PACKAGES += kmod-usb-core kmod-usb2 kmod-usb2-pci kmod-usb3 \
+		    kmod-usb-net kmod-usb-net-smsc95xx
+
+define Target/Description
+	Build firmware images for Broadcom/Netlogic XLP boards.
+endef
diff --git a/target/linux/netlogic/xlr/config-default b/target/linux/netlogic/xlr/config-default
new file mode 100644
index 0000000..ad2911d
--- /dev/null
+++ b/target/linux/netlogic/xlr/config-default
@@ -0,0 +1,2 @@
+CONFIG_NLM_XLR_BOARD=y
+CONFIG_I2C_XLR=y
diff --git a/target/linux/netlogic/xlr/target.mk b/target/linux/netlogic/xlr/target.mk
new file mode 100644
index 0000000..e786598
--- /dev/null
+++ b/target/linux/netlogic/xlr/target.mk
@@ -0,0 +1,7 @@
+CPU_TYPE:=xlr
+CPU_FLAGS_xlr:=-march=xlr -mabi=64
+BOARDNAME:=xlr
+
+define Target/Description
+	Build firmware images for Broadcom/Netlogic XLR boards.
+endef