firmware-utils: kernel image generator for TP-Link RE450

The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>

1 files changed, 352 insertions, 0 deletions

diff --git a/tools/firmware-utils/src/mktplinkfw-kernel.c b/tools/firmware-utils/src/mktplinkfw-kernel.c
new file mode 100644
index 0000000..1565e73
--- /dev/null
+++ b/tools/firmware-utils/src/mktplinkfw-kernel.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2016 Tal Keren <kooolk@gmail.com>
+ *
+ * Stripped down version of the regular tplink firmware that is only used
+ * for compressing and booting the kernel.
+ *
+ * This tool was based on:
+ *   TP-Link WR941 V2 firmware checksum fixing tool.
+ *   Copyright (C) 2008,2009 Wang Jian <lark@linux.net.cn>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>     /* for unlink() */
+#include <libgen.h>
+#include <getopt.h>     /* for getopt() */
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/stat.h>
+
+#include <arpa/inet.h>
+#include <netinet/in.h>
+
+#define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
+
+#define HEADER_VERSION_V1	0x01000000
+
+#define MD5SUM_LEN	16
+
+struct file_info {
+	char		*file_name;	/* name of the file */
+	uint32_t	file_size;	/* length of the file */
+};
+
+struct fw_header {
+	uint32_t	version;	/* header version */
+	char		vendor_name[24];
+	char		fw_version[36];
+	uint32_t	hw_id;		/* hardware id */
+	uint32_t	hw_rev;		/* hardware revision */
+	uint32_t	unk1;
+	uint8_t		md5sum1[MD5SUM_LEN];
+	uint32_t	unk2;
+	uint8_t		md5sum2[MD5SUM_LEN];
+	uint32_t	unk3;
+	uint32_t	kernel_la;	/* kernel load address */
+	uint32_t	kernel_ep;	/* kernel entry point */
+	uint32_t	fw_length;	/* total length of the firmware */
+	uint32_t	kernel_ofs;	/* kernel data offset */
+	uint32_t	kernel_len;	/* kernel data length */
+	uint32_t	rootfs_ofs;	/* rootfs data offset */
+	uint32_t	rootfs_len;	/* rootfs data length */
+	uint32_t	boot_ofs;	/* bootloader data offset */
+	uint32_t	boot_len;	/* bootloader data length */
+	uint16_t	ver_hi;
+	uint16_t	ver_mid;
+	uint16_t	ver_lo;
+	uint8_t		pad[354];
+} __attribute__ ((packed));
+
+
+/*
+ * Globals
+ */
+static char *ofname;
+static char *progname;
+static char *vendor = "TP-LINK Technologies";
+static char *version = "ver. 1.0";
+static char *fw_ver = "0.0.0";
+static uint32_t hdr_ver = HEADER_VERSION_V1;
+
+static char *opt_hw_id;
+static uint32_t hw_id = 0;
+static struct file_info kernel_info;
+static uint32_t kernel_la = 0;
+static uint32_t kernel_ep = 0;
+static uint32_t kernel_len = 0;
+
+/*
+ * Message macros
+ */
+#define ERR(fmt, ...) do { \
+	fflush(0); \
+	fprintf(stderr, "[%s] *** error: " fmt "\n", \
+			progname, ## __VA_ARGS__ ); \
+} while (0)
+
+#define ERRS(fmt, ...) do { \
+	int save = errno; \
+	fflush(0); \
+	fprintf(stderr, "[%s] *** error: " fmt ": %s\n", \
+			progname, ## __VA_ARGS__, strerror(save)); \
+} while (0)
+
+#define DBG(fmt, ...) do { \
+	fprintf(stderr, "[%s] " fmt "\n", progname, ## __VA_ARGS__ ); \
+} while (0)
+
+static void usage(int status)
+{
+	FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
+	struct board_info *board;
+
+	fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
+	fprintf(stream,
+"\n"
+"Options:\n"
+"  -E <ep>         kernel entry point with <ep> (hexval prefixed with 0x)\n"
+"  -L <la>         kernel load address with <la> (hexval prefixed with 0x)\n"
+"  -H <hwid>       use hardware id specified with <hwid>\n"
+"  -k <file>       read kernel image from the file <file>\n"
+"  -o <file>       write output to the file <file>\n"
+"  -N <vendor>     set image vendor to <vendor>\n"
+"  -V <version>    set image version to <version>\n"
+"  -h              show this screen\n"
+	);
+
+	exit(status);
+}
+
+static int get_file_stat(struct file_info *fdata)
+{
+	struct stat st;
+	int res;
+
+	if (fdata->file_name == NULL)
+		return 0;
+
+	res = stat(fdata->file_name, &st);
+	if (res){
+		ERRS("stat failed on %s", fdata->file_name);
+		return res;
+	}
+
+	fdata->file_size = st.st_size;
+	return 0;
+}
+
+static int read_to_buf(struct file_info *fdata, char *buf)
+{
+	FILE *f;
+	int ret = EXIT_FAILURE;
+
+	f = fopen(fdata->file_name, "r");
+	if (f == NULL) {
+		ERRS("could not open \"%s\" for reading", fdata->file_name);
+		goto out;
+	}
+
+	errno = 0;
+	fread(buf, fdata->file_size, 1, f);
+	if (errno != 0) {
+		ERRS("unable to read from file \"%s\"", fdata->file_name);
+		goto out_close;
+	}
+
+	ret = EXIT_SUCCESS;
+
+ out_close:
+	fclose(f);
+ out:
+	return ret;
+}
+
+static int check_options(void)
+{
+	int ret;
+
+	if (opt_hw_id) {
+		hw_id = strtoul(opt_hw_id, NULL, 0);
+	}
+
+	if (!kernel_la || !kernel_ep) {
+		ERR("kernel loading address and entry point must be specified");
+		return -1;
+	}
+
+	if (kernel_info.file_name == NULL) {
+		ERR("no kernel image specified");
+		return -1;
+	}
+
+	ret = get_file_stat(&kernel_info);
+	if (ret)
+		return ret;
+
+	kernel_len = kernel_info.file_size;
+
+	if (ofname == NULL) {
+		ERR("no output file specified");
+		return -1;
+	}
+
+	return 0;
+}
+
+static void fill_header(char *buf)
+{
+	struct fw_header *hdr = (struct fw_header *)buf;
+
+	memset(hdr, 0, sizeof(struct fw_header));
+
+	hdr->version = htonl(hdr_ver);
+	strncpy(hdr->vendor_name, vendor, sizeof(hdr->vendor_name));
+	strncpy(hdr->fw_version, version, sizeof(hdr->fw_version));
+
+	/**
+	 * This field is ignored and not specified in stock firmware
+	 * It is specified here to ensure sysupgrade hardware compatibility
+	 * The hardware id of a device is in the product-info partition
+	 */
+	hdr->hw_id = htonl(hw_id);
+
+	hdr->kernel_la = htonl(kernel_la);
+	hdr->kernel_ep = htonl(kernel_ep);
+
+	hdr->kernel_ofs = htonl(sizeof(struct fw_header));
+	hdr->kernel_len = htonl(kernel_len);
+}
+
+static int write_fw(char *data, int len)
+{
+	FILE *f;
+	int ret = EXIT_FAILURE;
+
+	f = fopen(ofname, "w");
+	if (f == NULL) {
+		ERRS("could not open \"%s\" for writing", ofname);
+		goto out;
+	}
+
+	errno = 0;
+	fwrite(data, len, 1, f);
+	if (errno) {
+		ERRS("unable to write output file");
+		goto out_flush;
+	}
+
+	DBG("firmware file \"%s\" completed", ofname);
+
+	ret = EXIT_SUCCESS;
+
+ out_flush:
+	fflush(f);
+	fclose(f);
+	if (ret != EXIT_SUCCESS) {
+		unlink(ofname);
+	}
+ out:
+	return ret;
+}
+
+static int build_fw(void)
+{
+	int buflen;
+	char *buf;
+	char *p;
+	int ret = EXIT_FAILURE;
+
+	buflen = sizeof(struct fw_header) + kernel_len;
+	buflen = ALIGN(buflen, 0x4);
+
+	buf = malloc(buflen);
+	if (!buf) {
+		ERR("no memory for buffer\n");
+		goto out;
+	}
+
+	memset(buf, 0, buflen);
+	p = buf + sizeof(struct fw_header);
+	ret = read_to_buf(&kernel_info, p);
+	if (ret)
+		goto out_free_buf;
+
+	fill_header(buf);
+	ret = write_fw(buf, buflen);
+	if (ret)
+		goto out_free_buf;
+
+	ret = EXIT_SUCCESS;
+
+ out_free_buf:
+	free(buf);
+ out:
+	return ret;
+}
+
+int main(int argc, char *argv[])
+{
+	int ret = EXIT_FAILURE;
+	int err;
+
+	FILE *outfile;
+
+	progname = basename(argv[0]);
+
+	while ( 1 ) {
+		int c;
+
+		c = getopt(argc, argv, "H:E:L:V:N:k:o:h");
+		if (c == -1)
+			break;
+
+		switch (c) {
+		case 'H':
+			opt_hw_id = optarg;
+			break;
+		case 'E':
+			sscanf(optarg, "0x%x", &kernel_ep);
+			break;
+		case 'L':
+			sscanf(optarg, "0x%x", &kernel_la);
+			break;
+		case 'V':
+			version = optarg;
+			break;
+		case 'N':
+			vendor = optarg;
+			break;
+		case 'k':
+			kernel_info.file_name = optarg;
+			break;
+		case 'o':
+			ofname = optarg;
+			break;
+		case 'h':
+			usage(EXIT_SUCCESS);
+			break;
+		default:
+			usage(EXIT_FAILURE);
+			break;
+		}
+	}
+
+	ret = check_options();
+	if (ret)
+		goto out;
+
+	ret = build_fw();
+
+ out:
+	return ret;
+}
+