diff options
| author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:08:10 +0800 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-07-30 14:02:40 +0200 |
| commit | 21ad5fb1eafd33f82850c18d1df3b247fce17e0e (patch) | |
| tree | c868363f900d3fa7f9c10420b7cb79fa8b6b9581 /tools/sparse | |
| parent | 4dc0ff8183a45d80db88a4b42a24cb0371786e35 (diff) | |
| download | mtk-20170518-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.zip mtk-20170518-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.tar.gz mtk-20170518-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.tar.bz2 | |
ar71xx:add support for E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9558)
- 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 4x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 3-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (JP5) and LEDs (J8) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
(cherry picked from commit b74f63f81d6121b5eace3f0c0c87399f7e0fde92)
Diffstat (limited to 'tools/sparse')
0 files changed, 0 insertions, 0 deletions