diff options
| author | Serg Studzinskii <serguzhg@gmail.com> | 2017-03-08 22:10:05 +0200 |
|---|---|---|
| committer | Piotr Dymacz <pepe2k@gmail.com> | 2017-06-11 21:32:17 +0200 |
| commit | b7cc6616152a12b3f68c5f36e9ef052da5de889e (patch) | |
| tree | a32a392b58844a8d0b38b4f24d2bb7595f324e75 /tools | |
| parent | 641af0c39d071c8fb33d90ac3b4d369d34c61dfb (diff) | |
| download | mtk-20170518-b7cc6616152a12b3f68c5f36e9ef052da5de889e.zip mtk-20170518-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.gz mtk-20170518-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.bz2 | |
ar71xx: add support for TP-Link TL-WR942N v1
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on
Qualcomm/Atheros QCA9561.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x USB 2.0
- 11x LED (most are controlled by 74HC595)
- 2x button
- UART header on PCB*
* Serial console is disabled in OEM non-beta firmwares and corresponding
GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by
production (non-beta) U-Boot and firmware.
Currently not working:
1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs
by some U-Boot versions.
Flash instruction under vendor GUI:
1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin".
2. Go to WEB interface and perform usual firmware upgrade.
FLash instruction under U-Boot recovery mode (doesn't work in beta
firmware):
1. Setup PC with static IP "192.168.0.66/24" and tftp server.
2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make
it available to download from your tftp server.
3. Press "reset" button and power up the router, wait till "WPS" LED
turns on.
Flash instruction under U-Boot, using UART (can be done only with
preinstalled UART-enabled U-Boot version!):
1. Use "tpl" to stop autobooting and obtain U-Boot CLI access.
2. Setup ip addresses for U-Boot and your tftp server.
3. Issue below commands:
tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b 0x81000000 0x9f020000 $filesize
reset
Signed-off-by: Serg Studzinskii <serguzhg@gmail.com>
[minor code style fixes, extended commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/firmware-utils/src/tplink-safeloader.c | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 9c9efc3..31b374f 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -553,6 +553,43 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the TL-WR942N V1 */ + { + .id = "TLWR942NV1", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n", + .support_trail = '\x00', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"os-image", 0x20000, 0x150000}, + {"file-system", 0x170000, 0xcd0000}, + {"default-mac", 0xe40000, 0x00200}, + {"pin", 0xe40200, 0x00200}, + {"product-info", 0xe40400, 0x0fc00}, + {"partition-table", 0xe50000, 0x10000}, + {"soft-version", 0xe60000, 0x10000}, + {"support-list", 0xe70000, 0x10000}, + {"profile", 0xe80000, 0x10000}, + {"default-config", 0xe90000, 0x10000}, + {"user-config", 0xea0000, 0x40000}, + {"qos-db", 0xee0000, 0x40000}, + {"certificate", 0xf20000, 0x10000}, + {"usb-config", 0xfb0000, 0x10000}, + {"log", 0xfc0000, 0x20000}, + {"radio-bk", 0xfe0000, 0x10000}, + {"radio", 0xff0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the RE450 */ { .id = "RE450", |