summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2017-07-02 18:32:38 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2017-07-04 08:58:54 +0200
commit6165e4aab0e22b780b6b1dde887ed803a7c8210a (patch)
tree4f95e80fcccc02122231d83e6f1579f8a97490af /tools
parent0a2e4204dbe0b7bf31cb4100491a01b2837d7f3f (diff)
downloadmtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.zip
mtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.tar.gz
mtk-20170518-6165e4aab0e22b780b6b1dde887ed803a7c8210a.tar.bz2
ar71xx: add support for TP-Link TL-WR902AC v1
TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of TL-MR3020 (both devices use very similar enclosure, in same size). New device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (GPIO-controlled power) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch - UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper resitors are missing on TX/RX lines) - 1x micro USB (for power only) Flash instructions: Use "factory" image under vendor GUI. Recovery instructions: This device contains tftp recovery mode inside U-Boot. You can use it to flash LEDE (use "factory" image) or vendor firmware. 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "lede-ar71xx-generic-tl-wr902ac-v1-squashfs-factory.bin" to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir. 3. Connect PC with LAN port, press the reset button, power up the router and keep button pressed until WPS LED lights up. 4. Router will download file from server, write it to flash and reboot. Root access over serial line in vendor firmware: root/sohoadmin. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'tools')
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c36
1 files changed, 36 insertions, 0 deletions
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index cc5b583..aa8cc31 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -672,6 +672,42 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WR902AC v1 */
+ {
+ .id = "TL-WR902AC-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ /**
+ 384KB were moved from file-system to os-image
+ in comparison to the stock image
+ */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"os-image", 0x20000, 0x160000},
+ {"file-system", 0x180000, 0x5d0000},
+ {"default-mac", 0x750000, 0x00200},
+ {"pin", 0x750200, 0x00200},
+ {"product-info", 0x750400, 0x0fc00},
+ {"soft-version", 0x760000, 0x0b000},
+ {"support-list", 0x76b000, 0x04000},
+ {"profile", 0x770000, 0x04000},
+ {"default-config", 0x774000, 0x0b000},
+ {"user-config", 0x780000, 0x40000},
+ {"partition-table", 0x7c0000, 0x10000},
+ {"log", 0x7d0000, 0x20000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the TL-WR942N V1 */
{
.id = "TLWR942NV1",