diff options
13 files changed, 260 insertions, 14 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 308a050..5011af6 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -92,6 +92,10 @@ c-55) ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt" ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt" ;; +c-60) + ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt" + ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt" + ;; cap4200ag) ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1" ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 4ef43cf..f720767 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -199,6 +199,10 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "3:lan" ;; + c-60) + ucidef_add_switch "switch0" \ + "0@eth0" "3:wan" "4:lan" + ;; cap324) ucidef_set_interface_lan "eth0" "dhcp" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index d5ddb51..0d069ec 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -73,7 +73,8 @@ get_status_led() { cap324) status_led="pcs:green:power" ;; - c-55) + c-55|\ + c-60) status_led="$board:green:pwr" ;; cap4200ag) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3141625..945167b 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -53,7 +53,8 @@ board=$(ar71xx_board_name) case "$FIRMWARE" in "soc_wmac.eeprom") case $board in - c-55) + c-55|\ + c-60) ath9k_eeprom_extract "art" 4096 2048 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1) ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index a8ea7d4..940c1c9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -482,6 +482,9 @@ ar71xx_board_detect() { *C-55) name="c-55" ;; + *C-60) + name="c-60" + ;; *CAP4200AG) name="cap4200ag" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx index 60e2787..50f59de 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx @@ -22,7 +22,8 @@ fetch_mac_from_mtd() { preinit_set_mac_address() { case $(ar71xx_board_name) in - c-55) + c-55|\ + c-60) mac_lan=$(mtd_get_mac_binary art 0) [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 010442c..7c554e3 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -424,6 +424,14 @@ platform_check_image() { tew-673gru) dir825b_check_image "$1" && return 0 ;; + c-60|\ + nbg6716|\ + r6100|\ + wndr3700v4|\ + wndr4300) + nand_do_platform_check $board $1 + return $? + ;; cpe210|\ cpe510) tplink_pharos_check_image "$1" && return 0 @@ -485,13 +493,6 @@ platform_check_image() { return 0 ;; - nbg6716|\ - r6100|\ - wndr3700v4|\ - wndr4300) - nand_do_platform_check $board $1 - return $? - ;; tube2h) alfa_check_image "$1" && return 0 return 1 @@ -537,16 +538,17 @@ platform_pre_upgrade() { local board=$(ar71xx_board_name) case "$board" in - mr18|\ - z1) - merakinand_do_upgrade "$1" - ;; + c-60|\ nbg6716|\ r6100|\ wndr3700v4|\ wndr4300) nand_do_upgrade "$1" ;; + mr18|\ + z1) + merakinand_do_upgrade "$1" + ;; esac } diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 9f4c16e..fb59b07 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_BSB=y CONFIG_ATH79_MACH_C55=y +CONFIG_ATH79_MACH_C60=y CONFIG_ATH79_MACH_CAP324=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 119bfd1..3084155 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -210,6 +210,18 @@ config ATH79_MACH_C55 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_C60 + bool "AirTight Networks C-60 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_DEV_NFC + select ATH79_DEV_USB + config ATH79_MACH_AW_NR580 bool "AzureWave AW-NR580 board support" select SOC_AR71XX diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 8d67723..ed5c4d8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o +obj-$(CONFIG_ATH79_MACH_C60) += mach-c60.o obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c new file mode 100644 index 0000000..2a9e721 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c @@ -0,0 +1,200 @@ +/* + * AirTight Networks C-60 board support + * + * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com> + * + * Based on AirTight Networks C-55 board support + * + * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/platform/ar934x_nfc.h> +#include <linux/ar8216_platform.h> +#include <linux/ath9k_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "dev-usb.h" +#include "dev-nfc.h" +#include "machtypes.h" + +#define C60_GPIO_LED_PWR_AMBER 11 +#define C60_GPIO_LED_WLAN2_GREEN 12 +#define C60_GPIO_LED_WLAN2_AMBER 13 +#define C60_GPIO_LED_PWR_GREEN 16 + +#define C60_GPIO_BTN_RESET 17 + +/* GPIOs of the AR9300 PCIe chip */ +#define C60_GPIO_WMAC_LED_WLAN1_AMBER 0 +#define C60_GPIO_WMAC_LED_WLAN1_GREEN 3 + +#define C60_KEYS_POLL_INTERVAL 20 /* msecs */ +#define C60_KEYS_DEBOUNCE_INTERVAL (3 * C60_KEYS_POLL_INTERVAL) + +#define C60_ART_ADDR 0x1f7f0000 +#define C60_ART_SIZE 0xffff +#define C60_MAC_OFFSET 0 +#define C60_WMAC_CALDATA_OFFSET 0x1000 +#define C60_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led c60_leds_gpio[] __initdata = { + { + .name = "c-60:amber:pwr", + .gpio = C60_GPIO_LED_PWR_AMBER, + .active_low = 1, + }, + { + .name = "c-60:green:pwr", + .gpio = C60_GPIO_LED_PWR_GREEN, + .active_low = 1, + }, + { + .name = "c-60:green:wlan2", + .gpio = C60_GPIO_LED_WLAN2_GREEN, + .active_low = 1, + }, + { + .name = "c-60:amber:wlan2", + .gpio = C60_GPIO_LED_WLAN2_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_keys_button c60_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = C60_KEYS_DEBOUNCE_INTERVAL, + .gpio = C60_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg c60_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data c60_ar8327_data = { + .pad0_cfg = &c60_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + } +}; + +static struct mdio_board_info c60_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &c60_ar8327_data, + }, +}; + +static struct nand_ecclayout c60_nand_ecclayout = { + .eccbytes = 7, + .eccpos = { 4, 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 3 }, { 6, 2 }, { 11, 2 }, } +}; + +static int c60_nand_scan_fixup(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + chip->ecc.size = 512; + chip->ecc.strength = 4; + chip->ecc.layout = &c60_nand_ecclayout; + return 0; +} + +static struct gpio_led c60_wmac0_leds_gpio[] = { + { + .name = "c-60:amber:wlan1", + .gpio = C60_GPIO_WMAC_LED_WLAN1_AMBER, + .active_low = 1, + }, + { + .name = "c-60:green:wlan1", + .gpio = C60_GPIO_WMAC_LED_WLAN1_GREEN, + .active_low = 1, + }, +}; + +static void __init c60_setup(void) +{ + u8 tmpmac[6]; + u8 *art = (u8 *) KSEG1ADDR(C60_ART_ADDR); + + /* NAND */ + ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH); + ath79_nfc_set_scan_fixup(c60_nand_scan_fixup); + ath79_register_nfc(); + + /* SPI Storage*/ + ath79_register_m25p80_large(NULL); + + /* AR8327 Switch Ethernet */ + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(c60_mdio0_info, + ARRAY_SIZE(c60_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_init_mac(ath79_eth0_data.mac_addr, art + C60_MAC_OFFSET, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + /* LEDs & GPIO */ + ath79_register_leds_gpio(-1, ARRAY_SIZE(c60_leds_gpio), + c60_leds_gpio); + ath79_register_gpio_keys_polled(-1, C60_KEYS_POLL_INTERVAL, + ARRAY_SIZE(c60_gpio_keys), + c60_gpio_keys); + ap9x_pci_setup_wmac_leds(0, c60_wmac0_leds_gpio, + ARRAY_SIZE(c60_wmac0_leds_gpio)); + /* USB */ + ath79_register_usb(); + + /* WiFi */ + ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 1); + ap91_pci_init(art + C60_PCIE_CALDATA_OFFSET, tmpmac); + ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 2); + ath79_register_wmac(art + C60_WMAC_CALDATA_OFFSET, tmpmac); +} +MIPS_MACHINE(ATH79_MACH_C60, "C-60", "AirTight Networks C-60", + c60_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index faba2b6..8835b97 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -47,6 +47,7 @@ enum ath79_mach_type { ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ ATH79_MACH_C55, /* AirTight Networks C-55 */ + ATH79_MACH_C60, /* AirTight Networks C-60 */ ATH79_MACH_CAP324, /* PowerCloud CAP324 */ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk index aa431ac..c08081b 100644 --- a/target/linux/ar71xx/image/nand.mk +++ b/target/linux/ar71xx/image/nand.mk @@ -1,3 +1,18 @@ +define Device/c-60 + DEVICE_TITLE := AirTight C-60 + DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-core kmod-usb2 kmod-ath9k + BOARDNAME = C-60 + BLOCKSIZE := 64k + KERNEL_SIZE = 3648k + IMAGE_SIZE = 32m + IMAGES := sysupgrade.tar + MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi) + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma + IMAGE/sysupgrade.tar := sysupgrade-tar +endef + +TARGET_DEVICES += c-60 + define Build/MerakiNAND -$(STAGING_DIR_HOST)/bin/mkmerakifw \ -B $(BOARDNAME) -s \ |