diff options
26 files changed, 0 insertions, 1533 deletions
diff --git a/target/linux/cns3xxx/config-3.14 b/target/linux/cns3xxx/config-3.14 deleted file mode 100644 index 000cfd3..0000000 --- a/target/linux/cns3xxx/config-3.14 +++ /dev/null @@ -1,263 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_CNS3XXX=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_NR_GPIO=0 -# CONFIG_ARCH_OMAP2 is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -# CONFIG_ARCH_WM8750 is not set -CONFIG_ARM=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_SD=y -CONFIG_BROADCOM_PHY=y -CONFIG_CACHE_L2X0=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CNS3XXX_ETH=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v6=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_ABRT_EV6=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V6=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_V6=y -CONFIG_CPU_V6K=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DMA_CACHE_FIQ_BROADCAST=y -CONFIG_DTC=y -CONFIG_EEPROM_AT24=y -CONFIG_FIQ=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HWMON=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_CNS3XXX=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KTIME_SCALAR=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_MACH_CNS3420VB is not set -CONFIG_MACH_GW2388=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_CNS3XXX=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_M25P80=y -# CONFIG_MTD_OF_PARTS is not set -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=2 -CONFIG_NTP_PPS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_PPS=y -CONFIG_PPS_CLIENT_GPIO=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_PROC_STRIPPED is not set -CONFIG_RAID_ATTRS=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1672=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SENSORS_AD7418=y -CONFIG_SENSORS_GSC=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_CNS3XXX=y -CONFIG_SPI_MASTER=y -# CONFIG_STAGING is not set -CONFIG_STOP_MACHINE=y -CONFIG_SWIOTLB=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TREE_RCU=y -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_CNS3XXX_EHCI=y -CONFIG_USB_CNS3XXX_OHCI=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_ETH is not set -CONFIG_USB_GADGET=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/cns3xxx/patches-3.14/000-cns3xxx_arch_include.patch b/target/linux/cns3xxx/patches-3.14/000-cns3xxx_arch_include.patch deleted file mode 100644 index f98fe0c..0000000 --- a/target/linux/cns3xxx/patches-3.14/000-cns3xxx_arch_include.patch +++ /dev/null @@ -1,8 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/Makefile -+++ b/arch/arm/mach-cns3xxx/Makefile -@@ -1,3 +1,5 @@ -+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -+ - obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o - cns3xxx-y += core.o pm.o - cns3xxx-$(CONFIG_ATAGS) += devices.o diff --git a/target/linux/cns3xxx/patches-3.14/001-cns3xxx_section_fix.patch b/target/linux/cns3xxx/patches-3.14/001-cns3xxx_section_fix.patch deleted file mode 100644 index 3191726..0000000 --- a/target/linux/cns3xxx/patches-3.14/001-cns3xxx_section_fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -307,7 +307,7 @@ static struct usb_ohci_pdata cns3xxx_usb - .power_off = csn3xxx_usb_power_off, - }; - --static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { -+static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { - { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, - { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, - { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, diff --git a/target/linux/cns3xxx/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/cns3xxx/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch deleted file mode 100644 index a7cf49b..0000000 --- a/target/linux/cns3xxx/patches-3.14/010-arm_introduce-dma-fiq-irq-broadcast.patch +++ /dev/null @@ -1,64 +0,0 @@ ---- a/arch/arm/include/asm/glue-cache.h -+++ b/arch/arm/include/asm/glue-cache.h -@@ -156,11 +156,19 @@ extern inline void nop_dma_unmap_area(co - #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) - #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) - #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) -+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST - #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) - - #define dmac_map_area __glue(_CACHE,_dma_map_area) - #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) - #define dmac_flush_range __glue(_CACHE,_dma_flush_range) -+#else -+#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) -+ -+#define dmac_map_area __glue(fiq,_dma_map_area) -+#define dmac_unmap_area __glue(fiq,_dma_unmap_area) -+#define dmac_flush_range __glue(fiq,_dma_flush_range) -+#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */ - #endif - - #endif ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -844,6 +844,17 @@ config DMA_CACHE_RWFO - in hardware, other workarounds are needed (e.g. cache - maintenance broadcasting in software via FIQ). - -+config DMA_CACHE_FIQ_BROADCAST -+ bool "Enable fiq broadcast DMA cache maintenance" -+ depends on CPU_V6K && SMP -+ select FIQ -+ help -+ The Snoop Control Unit on ARM11MPCore does not detect the -+ cache maintenance operations and the dma_{map,unmap}_area() -+ functions may leave stale cache entries on other CPUs. By -+ enabling this option, fiq broadcast in the ARMv6 -+ DMA cache maintenance functions is performed. -+ - config OUTER_CACHE - bool - ---- a/arch/arm/mm/flush.c -+++ b/arch/arm/mm/flush.c -@@ -281,6 +281,7 @@ void __sync_icache_dcache(pte_t pteval) - void flush_dcache_page(struct page *page) - { - struct address_space *mapping; -+ bool skip_broadcast = true; - - /* - * The zero page is never written to, so never has any dirty -@@ -291,7 +292,10 @@ void flush_dcache_page(struct page *page - - mapping = page_mapping(page); - -- if (!cache_ops_need_broadcast() && -+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST -+ skip_broadcast = !cache_ops_need_broadcast(); -+#endif -+ if (skip_broadcast && - mapping && !page_mapped(page)) - clear_bit(PG_dcache_clean, &page->flags); - else { diff --git a/target/linux/cns3xxx/patches-3.14/020-watchdog_support.patch b/target/linux/cns3xxx/patches-3.14/020-watchdog_support.patch deleted file mode 100644 index 74ffcc3..0000000 --- a/target/linux/cns3xxx/patches-3.14/020-watchdog_support.patch +++ /dev/null @@ -1,59 +0,0 @@ -1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog - since the CNS3xxx SOCs have ARM11 MPcore CPU. -2. Enable mpcore_watchdog option as module to default configuration at - arch/arm/configs/cns3420vb_defconfig. - -Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com> - ---- -arch/arm/Kconfig | 1 + - arch/arm/configs/cns3420vb_defconfig | 2 ++ - arch/arm/mach-cns3xxx/cns3420vb.c | 22 ++++++++++++++++++++++ - 3 files changed, 25 insertions(+), 0 deletions(-) - ---- a/arch/arm/configs/cns3420vb_defconfig -+++ b/arch/arm/configs/cns3420vb_defconfig -@@ -56,6 +56,8 @@ CONFIG_LEGACY_PTY_COUNT=16 - # CONFIG_HW_RANDOM is not set - # CONFIG_HWMON is not set - # CONFIG_VGA_CONSOLE is not set -+CONFIG_WATCHDOG=y -+CONFIG_MPCORE_WATCHDOG=m - # CONFIG_HID_SUPPORT is not set - # CONFIG_USB_SUPPORT is not set - CONFIG_MMC=y ---- a/arch/arm/mach-cns3xxx/cns3420vb.c -+++ b/arch/arm/mach-cns3xxx/cns3420vb.c -@@ -206,10 +206,32 @@ static struct platform_device cns3xxx_us - }, - }; - -+/* Watchdog */ -+static struct resource cns3xxx_watchdog_resources[] = { -+ [0] = { -+ .start = CNS3XXX_TC11MP_TWD_BASE, -+ .end = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_LOCALWDOG, -+ .end = IRQ_LOCALWDOG, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device cns3xxx_watchdog_device = { -+ .name = "mpcore_wdt", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(cns3xxx_watchdog_resources), -+ .resource = cns3xxx_watchdog_resources, -+}; -+ - /* - * Initialization - */ - static struct platform_device *cns3420_pdevs[] __initdata = { -+ &cns3xxx_watchdog_device, - &cns3420_nor_pdev, - &cns3xxx_usb_ehci_device, - &cns3xxx_usb_ohci_device, diff --git a/target/linux/cns3xxx/patches-3.14/025-smp_support.patch b/target/linux/cns3xxx/patches-3.14/025-smp_support.patch deleted file mode 100644 index d4ae6f4..0000000 --- a/target/linux/cns3xxx/patches-3.14/025-smp_support.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/Makefile -+++ b/arch/arm/mach-cns3xxx/Makefile -@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o - cns3xxx-$(CONFIG_ATAGS) += devices.o - cns3xxx-$(CONFIG_PCI) += pcie.o - cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o -+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o -+cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o ---- a/arch/arm/mach-cns3xxx/Kconfig -+++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -6,6 +6,9 @@ config ARCH_CNS3XXX - select MIGHT_HAVE_CACHE_L2X0 - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI -+ select HAVE_ARM_SCU if SMP -+ select HAVE_ARM_TWD if LOCAL_TIMERS -+ select HAVE_SMP - help - Support for Cavium Networks CNS3XXX platform. - ---- a/arch/arm/mach-cns3xxx/core.h -+++ b/arch/arm/mach-cns3xxx/core.h -@@ -13,6 +13,7 @@ - - #include <linux/reboot.h> - -+extern struct smp_operations cns3xxx_smp_ops; - extern void cns3xxx_timer_init(void); - - #ifdef CONFIG_CACHE_L2X0 diff --git a/target/linux/cns3xxx/patches-3.14/030-pcie_clock.patch b/target/linux/cns3xxx/patches-3.14/030-pcie_clock.patch deleted file mode 100644 index 3734daf..0000000 --- a/target/linux/cns3xxx/patches-3.14/030-pcie_clock.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -370,8 +370,6 @@ static int __init cns3xxx_pcie_init(void - for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { - iotable_init(cns3xxx_pcie[i].cfg_bases, - ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); -- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); -- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); - cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); - cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); - pci_common_init(&cns3xxx_pcie[i].hw_pci); diff --git a/target/linux/cns3xxx/patches-3.14/040-fiq_support.patch b/target/linux/cns3xxx/patches-3.14/040-fiq_support.patch deleted file mode 100644 index 3ef9d1c..0000000 --- a/target/linux/cns3xxx/patches-3.14/040-fiq_support.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/Kconfig -+++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -9,6 +9,7 @@ config ARCH_CNS3XXX - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if LOCAL_TIMERS - select HAVE_SMP -+ select FIQ - help - Support for Cavium Networks CNS3XXX platform. - ---- a/arch/arm/mach-cns3xxx/Makefile -+++ b/arch/arm/mach-cns3xxx/Makefile -@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o - cns3xxx-$(CONFIG_ATAGS) += devices.o - cns3xxx-$(CONFIG_PCI) += pcie.o - cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o --cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o -+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o - cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o ---- a/arch/arm/mach-cns3xxx/cns3xxx.h -+++ b/arch/arm/mach-cns3xxx/cns3xxx.h -@@ -267,6 +267,7 @@ - #define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100) - #define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100) - -+#define MISC_FIQ_CPU(x) MISC_MEM_MAP(0xA58 - (x) * 0x4) - /* - * Power management and clock control - */ ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -827,7 +827,7 @@ config KUSER_HELPERS - - config DMA_CACHE_RWFO - bool "Enable read/write for ownership DMA cache maintenance" -- depends on CPU_V6K && SMP -+ depends on CPU_V6K && SMP && !ARCH_CNS3XXX - default y - help - The Snoop Control Unit on ARM11MPCore does not detect the diff --git a/target/linux/cns3xxx/patches-3.14/045-twd_base.patch b/target/linux/cns3xxx/patches-3.14/045-twd_base.patch deleted file mode 100644 index b93a7f1..0000000 --- a/target/linux/cns3xxx/patches-3.14/045-twd_base.patch +++ /dev/null @@ -1,45 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -17,6 +17,7 @@ - #include <linux/platform_device.h> - #include <linux/usb/ehci_pdriver.h> - #include <linux/usb/ohci_pdriver.h> -+#include <asm/smp_twd.h> - #include <asm/mach/arch.h> - #include <asm/mach/map.h> - #include <asm/mach/time.h> -@@ -26,6 +27,8 @@ - #include "core.h" - #include "pm.h" - -+#define IRQ_LOCALTIMER 29 -+ - static struct map_desc cns3xxx_io_desc[] __initdata = { - { - .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, -@@ -159,6 +162,17 @@ static struct irqaction cns3xxx_timer_ir - .handler = cns3xxx_timer_interrupt, - }; - -+static void __init cns3xxx_init_twd(void) -+{ -+#ifdef CONFIG_LOCAL_TIMERS -+ static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer, -+ CNS3XXX_TC11MP_TWD_BASE, -+ IRQ_LOCALTIMER); -+ -+ twd_local_timer_register(&cns3xx_twd_local_timer); -+#endif -+} -+ - /* - * Set up the clock source and clock events devices - */ -@@ -212,6 +226,7 @@ static void __init __cns3xxx_timer_init( - setup_irq(timer_irq, &cns3xxx_timer_irq); - - cns3xxx_clockevents_init(timer_irq); -+ cns3xxx_init_twd(); - } - - void __init cns3xxx_timer_init(void) diff --git a/target/linux/cns3xxx/patches-3.14/055-pcie_io.patch b/target/linux/cns3xxx/patches-3.14/055-pcie_io.patch deleted file mode 100644 index b4f2768..0000000 --- a/target/linux/cns3xxx/patches-3.14/055-pcie_io.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[] - .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), - .length = SZ_4K, - .type = MT_DEVICE, -+ }, { -+ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT, -+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE), -+ .length = SZ_16M, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT, -+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE), -+ .length = SZ_16M, -+ .type = MT_DEVICE, - }, - }; - diff --git a/target/linux/cns3xxx/patches-3.14/060-pcie_abort.patch b/target/linux/cns3xxx/patches-3.14/060-pcie_abort.patch deleted file mode 100644 index e1edf05..0000000 --- a/target/linux/cns3xxx/patches-3.14/060-pcie_abort.patch +++ /dev/null @@ -1,129 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -92,6 +92,79 @@ static void __iomem *cns3xxx_pci_cfg_bas - return base + offset; - } - -+static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where) -+{ -+ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); -+ -+ /* check PCI-compatible status register after access */ -+ if (cnspci->linked) { -+ void __iomem *host_base; -+ u32 sreg, ereg; -+ -+ host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual; -+ sreg = __raw_readw(host_base + 0x6) & 0xF900; -+ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg -+ -+ if (sreg | ereg) { -+ /* SREG: -+ * BIT15 - Detected Parity Error -+ * BIT14 - Signaled System Error -+ * BIT13 - Received Master Abort -+ * BIT12 - Received Target Abort -+ * BIT11 - Signaled Target Abort -+ * BIT08 - Master Data Parity Error -+ * -+ * EREG: -+ * BIT20 - Unsupported Request -+ * BIT19 - ECRC -+ * BIT18 - Malformed TLP -+ * BIT17 - Receiver Overflow -+ * BIT16 - Unexpected Completion -+ * BIT15 - Completer Abort -+ * BIT14 - Completion Timeout -+ * BIT13 - Flow Control Protocol Error -+ * BIT12 - Poisoned TLP -+ * BIT04 - Data Link Protocol Error -+ * -+ * TODO: see Documentation/pci-error-recovery.txt -+ * implement error_detected handler -+ */ -+/* -+ printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg); -+ if (sreg & BIT(15)) printk(" <PERR"); -+ if (sreg & BIT(14)) printk(" >SERR"); -+ if (sreg & BIT(13)) printk(" <MABRT"); -+ if (sreg & BIT(12)) printk(" <TABRT"); -+ if (sreg & BIT(11)) printk(" >TABRT"); -+ if (sreg & BIT( 8)) printk(" MPERR"); -+ -+ if (ereg & BIT(20)) printk(" Unsup"); -+ if (ereg & BIT(19)) printk(" ECRC"); -+ if (ereg & BIT(18)) printk(" MTLP"); -+ if (ereg & BIT(17)) printk(" OFLOW"); -+ if (ereg & BIT(16)) printk(" Unex"); -+ if (ereg & BIT(15)) printk(" ABRT"); -+ if (ereg & BIT(14)) printk(" COMPTO"); -+ if (ereg & BIT(13)) printk(" FLOW"); -+ if (ereg & BIT(12)) printk(" PTLP"); -+ if (ereg & BIT( 4)) printk(" DLINK"); -+ printk("\n"); -+*/ -+ pr_debug("%s failed port%d sreg=0x%04x\n", __func__, -+ cnspci->hw_pci.domain, sreg); -+ -+ /* make sure the status bits are reset */ -+ __raw_writew(sreg, host_base + 6); -+ __raw_writel(ereg, host_base + 0x104); -+ return 1; -+ } -+ } -+ else -+ return 1; -+ -+ return 0; -+} -+ - static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) - { -@@ -108,6 +181,11 @@ static int cns3xxx_pci_read_config(struc - - v = __raw_readl(base); - -+ if (check_master_abort(bus, devfn, where)) { -+ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } -+ - if (bus->number == 0 && devfn == 0 && - (where & 0xffc) == PCI_CLASS_REVISION) { - /* -@@ -137,11 +215,19 @@ static int cns3xxx_pci_write_config(stru - return PCIBIOS_SUCCESSFUL; - - v = __raw_readl(base); -+ if (check_master_abort(bus, devfn, where)) { -+ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } - - v &= ~(mask << shift); - v |= (val & mask) << shift; - - __raw_writel(v, base); -+ if (check_master_abort(bus, devfn, where)) { -+ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on write\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } - - return PCIBIOS_SUCCESSFUL; - } -@@ -352,8 +438,14 @@ static void __init cns3xxx_pcie_hw_init( - static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) - { -+#if 0 -+/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE -+ * ignore imprecise aborts and use PCI-compatible Status register to -+ * determine errors instead -+ */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; -+#endif - return 0; - } - diff --git a/target/linux/cns3xxx/patches-3.14/065-pcie_early_init.patch b/target/linux/cns3xxx/patches-3.14/065-pcie_early_init.patch deleted file mode 100644 index ca66255..0000000 --- a/target/linux/cns3xxx/patches-3.14/065-pcie_early_init.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/cns3420vb.c -+++ b/arch/arm/mach-cns3xxx/cns3420vb.c -@@ -261,11 +261,21 @@ static struct map_desc cns3420_io_desc[] - static void __init cns3420_map_io(void) - { - cns3xxx_map_io(); -+ cns3xxx_pcie_iotable_init(); - iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc)); - - cns3420_early_serial_setup(); - } - -+static int __init cns3420vb_pcie_init(void) -+{ -+ if (!machine_is_cns3420vb()) -+ return 0; -+ -+ return cns3xxx_pcie_init(); -+} -+subsys_initcall(cns3420vb_pcie_init); -+ - MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") - .atag_offset = 0x100, - .nr_irqs = NR_IRQS_CNS3XXX, ---- a/arch/arm/mach-cns3xxx/core.h -+++ b/arch/arm/mach-cns3xxx/core.h -@@ -15,6 +15,7 @@ - - extern struct smp_operations cns3xxx_smp_ops; - extern void cns3xxx_timer_init(void); -+extern void cns3xxx_pcie_iotable_init(void); - - #ifdef CONFIG_CACHE_L2X0 - void __init cns3xxx_l2x0_init(void); -@@ -24,6 +25,7 @@ static inline void cns3xxx_l2x0_init(voi - - void __init cns3xxx_map_io(void); - void __init cns3xxx_init_irq(void); -+int __init cns3xxx_pcie_init(void); - void cns3xxx_power_off(void); - void cns3xxx_restart(enum reboot_mode, const char *); - ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -449,7 +449,18 @@ static int cns3xxx_pcie_abort_handler(un - return 0; - } - --static int __init cns3xxx_pcie_init(void) -+ -+void __init cns3xxx_pcie_iotable_init() -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { -+ iotable_init(cns3xxx_pcie[i].cfg_bases, -+ ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); -+ } -+} -+ -+int __init cns3xxx_pcie_init(void) - { - int i; - -@@ -460,15 +471,14 @@ static int __init cns3xxx_pcie_init(void - "imprecise external abort"); - - for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { -- iotable_init(cns3xxx_pcie[i].cfg_bases, -- ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases)); - cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); -- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); -- pci_common_init(&cns3xxx_pcie[i].hw_pci); -+ if (cns3xxx_pcie[i].linked) { -+ cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); -+ pci_common_init(&cns3xxx_pcie[i].hw_pci); -+ } - } - - pci_assign_unassigned_resources(); - - return 0; - } --device_initcall(cns3xxx_pcie_init); diff --git a/target/linux/cns3xxx/patches-3.14/070-i2c_support.patch b/target/linux/cns3xxx/patches-3.14/070-i2c_support.patch deleted file mode 100644 index 1b2a7d8..0000000 --- a/target/linux/cns3xxx/patches-3.14/070-i2c_support.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -386,6 +386,18 @@ config I2C_CBUS_GPIO - This driver can also be built as a module. If so, the module - will be called i2c-cbus-gpio. - -+config I2C_CNS3XXX -+ tristate "Cavium CNS3xxx I2C driver" -+ depends on ARCH_CNS3XXX -+ help -+ Support for Cavium CNS3xxx I2C controller driver. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-cns3xxx. -+ -+ Please note that this driver might be needed to bring up other -+ devices such as Cavium CNS3xxx Ethernet. -+ - config I2C_CPM - tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" - depends on CPM1 || CPM2 ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-ko - obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o - obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o - obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o -+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o - obj-$(CONFIG_SCx200_ACB) += scx200_acb.o - obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o - diff --git a/target/linux/cns3xxx/patches-3.14/075-spi_support.patch b/target/linux/cns3xxx/patches-3.14/075-spi_support.patch deleted file mode 100644 index 2828e71..0000000 --- a/target/linux/cns3xxx/patches-3.14/075-spi_support.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -155,6 +155,13 @@ config SPI_CLPS711X - This enables dedicated general purpose SPI/Microwire1-compatible - master mode interface (SSI1) for CLPS711X-based CPUs. - -+config SPI_CNS3XXX -+ tristate "CNS3XXX SPI controller" -+ depends on ARCH_CNS3XXX && SPI_MASTER -+ select SPI_BITBANG -+ help -+ This enables using the CNS3XXX SPI controller in master mode. -+ - config SPI_COLDFIRE_QSPI - tristate "Freescale Coldfire QSPI controller" - depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_BFIN_V3) - obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o - obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o - obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o -+obj-$(CONFIG_SPI_CNS3XXX) += spi-cns3xxx.o - obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o - obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o - obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o ---- a/drivers/spi/spi-bitbang.c -+++ b/drivers/spi/spi-bitbang.c -@@ -333,6 +333,10 @@ static int spi_bitbang_transfer_one(stru - */ - if (!m->is_dma_mapped) - t->rx_dma = t->tx_dma = 0; -+ -+ t->last_in_message_list = -+ list_is_last(&t->transfer_list, &m->transfers); -+ - status = bitbang->txrx_bufs(spi, t); - } - if (status > 0) ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -591,6 +591,13 @@ struct spi_transfer { - u32 speed_hz; - - struct list_head transfer_list; -+ -+#ifdef CONFIG_ARCH_CNS3XXX -+ unsigned last_in_message_list; -+#ifdef CONFIG_SPI_CNS3XXX_2IOREAD -+ u8 dio_read; -+#endif -+#endif - }; - - /** diff --git a/target/linux/cns3xxx/patches-3.14/080-sata_support.patch b/target/linux/cns3xxx/patches-3.14/080-sata_support.patch deleted file mode 100644 index 7402131..0000000 --- a/target/linux/cns3xxx/patches-3.14/080-sata_support.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/devices.c -+++ b/arch/arm/mach-cns3xxx/devices.c -@@ -40,7 +40,7 @@ static struct resource cns3xxx_ahci_reso - static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32); - - static struct platform_device cns3xxx_ahci_pdev = { -- .name = "ahci", -+ .name = "cns3xxx-ahci", - .id = 0, - .resource = cns3xxx_ahci_resource, - .num_resources = ARRAY_SIZE(cns3xxx_ahci_resource), ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -31,6 +31,7 @@ enum ahci_type { - AHCI, /* standard platform ahci */ - IMX53_AHCI, /* ahci on i.mx53 */ - STRICT_AHCI, /* delayed DMA engine start */ -+ CNS3XXX_AHCI, /* AHCI on cns3xxx */ - }; - - static struct platform_device_id ahci_devtype[] = { -@@ -44,6 +45,9 @@ static struct platform_device_id ahci_de - .name = "strict-ahci", - .driver_data = STRICT_AHCI, - }, { -+ .name = "cns3xxx-ahci", -+ .driver_data = CNS3XXX_AHCI, -+ }, { - /* sentinel */ - } - }; -@@ -81,6 +85,12 @@ static const struct ata_port_info ahci_p - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_platform_ops, - }, -+ [CNS3XXX_AHCI] = { -+ .flags = AHCI_FLAG_COMMON, -+ .pio_mask = ATA_PIO4, -+ .udma_mask = ATA_UDMA6, -+ .port_ops = &ahci_platform_retry_srst_ops, -+ } - }; - - static struct scsi_host_template ahci_platform_sht = { diff --git a/target/linux/cns3xxx/patches-3.14/085-ethernet_support.patch b/target/linux/cns3xxx/patches-3.14/085-ethernet_support.patch deleted file mode 100644 index 6a9be35..0000000 --- a/target/linux/cns3xxx/patches-3.14/085-ethernet_support.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -34,6 +34,7 @@ source "drivers/net/ethernet/calxeda/Kco - source "drivers/net/ethernet/chelsio/Kconfig" - source "drivers/net/ethernet/cirrus/Kconfig" - source "drivers/net/ethernet/cisco/Kconfig" -+source "drivers/net/ethernet/cavium/Kconfig" - source "drivers/net/ethernet/davicom/Kconfig" - - config DNET ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_NET_BFIN) += adi/ - obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ - obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ - obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/ -+obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/ - obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ - obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/ - obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ diff --git a/target/linux/cns3xxx/patches-3.14/090-timers.patch b/target/linux/cns3xxx/patches-3.14/090-timers.patch deleted file mode 100644 index 46635e1..0000000 --- a/target/linux/cns3xxx/patches-3.14/090-timers.patch +++ /dev/null @@ -1,104 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -103,12 +103,13 @@ static void cns3xxx_timer_set_mode(enum - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: -- reload = pclk * 20 / (3 * HZ) * 0x25000; -+ reload = pclk * 1000000 / HZ; - writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); - ctrl |= (1 << 0) | (1 << 2) | (1 << 9); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ -+ writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); - ctrl |= (1 << 2) | (1 << 9); - break; - case CLOCK_EVT_MODE_UNUSED: -@@ -136,7 +137,7 @@ static struct clock_event_device cns3xxx - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = cns3xxx_timer_set_mode, - .set_next_event = cns3xxx_timer_set_next_event, -- .rating = 350, -+ .rating = 300, - .cpumask = cpu_all_mask, - }; - -@@ -183,6 +184,35 @@ static void __init cns3xxx_init_twd(void - #endif - } - -+static cycle_t cns3xxx_get_cycles(struct clocksource *cs) -+{ -+ u64 val; -+ -+ val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); -+ val &= 0xffff; -+ -+ return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET)); -+} -+ -+static struct clocksource clocksource_cns3xxx = { -+ .name = "freerun", -+ .rating = 200, -+ .read = cns3xxx_get_cycles, -+ .mask = CLOCKSOURCE_MASK(48), -+ .shift = 16, -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+static void __init cns3xxx_clocksource_init(void) -+{ -+ /* Reset the FreeRunning counter */ -+ writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); -+ -+ clocksource_cns3xxx.mult = -+ clocksource_khz2mult(100, clocksource_cns3xxx.shift); -+ clocksource_register(&clocksource_cns3xxx); -+} -+ - /* - * Set up the clock source and clock events devices - */ -@@ -200,13 +230,12 @@ static void __init __cns3xxx_timer_init( - /* stop free running timer3 */ - writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); - -- /* timer1 */ -- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); -- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); -- - writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET); - writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET); - -+ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ; -+ writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); -+ - /* mask irq, non-mask timer1 overflow */ - irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); - irq_mask &= ~(1 << 2); -@@ -218,23 +247,9 @@ static void __init __cns3xxx_timer_init( - val |= (1 << 9); - writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); - -- /* timer2 */ -- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET); -- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET); -- -- /* mask irq */ -- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); -- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5)); -- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); -- -- /* down counter */ -- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); -- val |= (1 << 10); -- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); -- -- /* Make irqs happen for the system timer */ - setup_irq(timer_irq, &cns3xxx_timer_irq); - -+ cns3xxx_clocksource_init(); - cns3xxx_clockevents_init(timer_irq); - cns3xxx_init_twd(); - } diff --git a/target/linux/cns3xxx/patches-3.14/095-gpio_support.patch b/target/linux/cns3xxx/patches-3.14/095-gpio_support.patch deleted file mode 100644 index fead43a..0000000 --- a/target/linux/cns3xxx/patches-3.14/095-gpio_support.patch +++ /dev/null @@ -1,82 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/cns3420vb.c -+++ b/arch/arm/mach-cns3xxx/cns3420vb.c -@@ -245,6 +245,10 @@ static void __init cns3420_init(void) - - cns3xxx_ahci_init(); - cns3xxx_sdhci_init(); -+ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA, -+ NR_IRQS_CNS3XXX); -+ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB, -+ NR_IRQS_CNS3XXX + 32); - - pm_power_off = cns3xxx_power_off; - } ---- a/arch/arm/mach-cns3xxx/core.h -+++ b/arch/arm/mach-cns3xxx/core.h -@@ -17,12 +17,6 @@ extern struct smp_operations cns3xxx_smp - extern void cns3xxx_timer_init(void); - extern void cns3xxx_pcie_iotable_init(void); - --#ifdef CONFIG_CACHE_L2X0 --void __init cns3xxx_l2x0_init(void); --#else --static inline void cns3xxx_l2x0_init(void) {} --#endif /* CONFIG_CACHE_L2X0 */ -- - void __init cns3xxx_map_io(void); - void __init cns3xxx_init_irq(void); - int __init cns3xxx_pcie_init(void); ---- a/arch/arm/mach-cns3xxx/Kconfig -+++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -2,6 +2,8 @@ config ARCH_CNS3XXX - bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 - select ARM_GIC - select CPU_V6K -+ select ARCH_REQUIRE_GPIOLIB -+ select GENERIC_IRQ_CHIP - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select MIGHT_HAVE_PCI ---- a/arch/arm/mach-cns3xxx/Makefile -+++ b/arch/arm/mach-cns3xxx/Makefile -@@ -1,7 +1,7 @@ - ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - - obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o --cns3xxx-y += core.o pm.o -+cns3xxx-y += core.o pm.o gpio.o - cns3xxx-$(CONFIG_ATAGS) += devices.o - cns3xxx-$(CONFIG_PCI) += pcie.o - cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o ---- a/arch/arm/mach-cns3xxx/cns3xxx.h -+++ b/arch/arm/mach-cns3xxx/cns3xxx.h -@@ -68,8 +68,10 @@ - #define SMC_PCELL_ID_3_OFFSET 0xFFC - - #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ -+#define CNS3XXX_GPIOA_BASE_VIRT 0xFB006000 - - #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ -+#define CNS3XXX_GPIOB_BASE_VIRT 0xFB007000 - - #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ - ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -60,6 +60,16 @@ static struct map_desc cns3xxx_io_desc[] - .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE), - .length = SZ_16M, - .type = MT_DEVICE, -+ }, { -+ .virtual = CNS3XXX_GPIOA_BASE_VIRT, -+ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE, -+ }, { -+ .virtual = CNS3XXX_GPIOB_BASE_VIRT, -+ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE, - }, - }; - diff --git a/target/linux/cns3xxx/patches-3.14/097-l2x0_cmdline_disable.patch b/target/linux/cns3xxx/patches-3.14/097-l2x0_cmdline_disable.patch deleted file mode 100644 index 73619ba..0000000 --- a/target/linux/cns3xxx/patches-3.14/097-l2x0_cmdline_disable.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/core.c -+++ b/arch/arm/mach-cns3xxx/core.c -@@ -273,13 +273,26 @@ void __init cns3xxx_timer_init(void) - - #ifdef CONFIG_CACHE_L2X0 - --void __init cns3xxx_l2x0_init(void) -+static int cns3xxx_l2x0_enable = 1; -+ -+static int __init cns3xxx_l2x0_disable(char *s) -+{ -+ cns3xxx_l2x0_enable = 0; -+ return 1; -+} -+__setup("nol2x0", cns3xxx_l2x0_disable); -+ -+static int __init cns3xxx_l2x0_init(void) - { -- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); -+ void __iomem *base; - u32 val; - -+ if (!cns3xxx_l2x0_enable) -+ return 0; -+ -+ base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); - if (WARN_ON(!base)) -- return; -+ return 0; - - /* - * Tag RAM Control register -@@ -309,7 +322,10 @@ void __init cns3xxx_l2x0_init(void) - - /* 32 KiB, 8-way, parity disable */ - l2x0_init(base, 0x00540000, 0xfe000fff); -+ -+ return 0; - } -+arch_initcall(cns3xxx_l2x0_init); - - #endif /* CONFIG_CACHE_L2X0 */ - ---- a/arch/arm/mach-cns3xxx/cns3420vb.c -+++ b/arch/arm/mach-cns3xxx/cns3420vb.c -@@ -239,8 +239,6 @@ static struct platform_device *cns3420_p - - static void __init cns3420_init(void) - { -- cns3xxx_l2x0_init(); -- - platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); - - cns3xxx_ahci_init(); diff --git a/target/linux/cns3xxx/patches-3.14/100-laguna_support.patch b/target/linux/cns3xxx/patches-3.14/100-laguna_support.patch deleted file mode 100644 index d2338e2..0000000 --- a/target/linux/cns3xxx/patches-3.14/100-laguna_support.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/Kconfig -+++ b/arch/arm/mach-cns3xxx/Kconfig -@@ -27,4 +27,12 @@ config MACH_CNS3420VB - This is a platform with an on-board ARM11 MPCore and has support - for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. - -+config MACH_GW2388 -+ bool "Support for Gateworks Laguna Platform" -+ help -+ Include support for the Gateworks Laguna Platform -+ -+ This is a platform with an on-board ARM11 MPCore and has support -+ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc. -+ - endmenu ---- a/arch/arm/mach-cns3xxx/Makefile -+++ b/arch/arm/mach-cns3xxx/Makefile -@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o - cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o - cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o - cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o -+cns3xxx-$(CONFIG_MACH_GW2388) += laguna.o -+ ---- a/arch/arm/mach-cns3xxx/devices.c -+++ b/arch/arm/mach-cns3xxx/devices.c -@@ -16,6 +16,7 @@ - #include <linux/compiler.h> - #include <linux/dma-mapping.h> - #include <linux/platform_device.h> -+#include <asm/mach-types.h> - #include "cns3xxx.h" - #include "pm.h" - #include "core.h" -@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void) - u32 gpioa_pins = __raw_readl(gpioa); - - /* MMC/SD pins share with GPIOA */ -- gpioa_pins |= 0x1fff0004; -+ if (machine_is_gw2388()) { -+ gpioa_pins |= 0x1fff0000; -+ } else { -+ gpioa_pins |= 0x1fff0004; -+ } - __raw_writel(gpioa_pins, gpioa); - - cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); diff --git a/target/linux/cns3xxx/patches-3.14/101-laguna_sdhci_card_detect.patch b/target/linux/cns3xxx/patches-3.14/101-laguna_sdhci_card_detect.patch deleted file mode 100644 index 2d28785..0000000 --- a/target/linux/cns3xxx/patches-3.14/101-laguna_sdhci_card_detect.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/mmc/host/sdhci-cns3xxx.c -+++ b/drivers/mmc/host/sdhci-cns3xxx.c -@@ -88,10 +88,11 @@ static const struct sdhci_pltfm_data sdh - .ops = &sdhci_cns3xxx_ops, - .quirks = SDHCI_QUIRK_BROKEN_DMA | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | -- SDHCI_QUIRK_INVERTED_WRITE_PROTECT | -+ //SDHCI_QUIRK_INVERTED_WRITE_PROTECT | - SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | -- SDHCI_QUIRK_NONSTANDARD_CLOCK, -+ SDHCI_QUIRK_NONSTANDARD_CLOCK | -+ SDHCI_QUIRK_BROKEN_CARD_DETECTION, - }; - - static int sdhci_cns3xxx_probe(struct platform_device *pdev) diff --git a/target/linux/cns3xxx/patches-3.14/110-pci_isolated_interrupts.patch b/target/linux/cns3xxx/patches-3.14/110-pci_isolated_interrupts.patch deleted file mode 100644 index 4aeb210..0000000 --- a/target/linux/cns3xxx/patches-3.14/110-pci_isolated_interrupts.patch +++ /dev/null @@ -1,193 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/cns3420vb.c -+++ b/arch/arm/mach-cns3xxx/cns3420vb.c -@@ -274,7 +274,7 @@ static int __init cns3420vb_pcie_init(vo - if (!machine_is_cns3420vb()) - return 0; - -- return cns3xxx_pcie_init(); -+ return cns3xxx_pcie_init(NULL, NULL); - } - subsys_initcall(cns3420vb_pcie_init); - ---- a/arch/arm/mach-cns3xxx/core.h -+++ b/arch/arm/mach-cns3xxx/core.h -@@ -19,7 +19,7 @@ extern void cns3xxx_pcie_iotable_init(vo - - void __init cns3xxx_map_io(void); - void __init cns3xxx_init_irq(void); --int __init cns3xxx_pcie_init(void); -+int __init cns3xxx_pcie_init(int *pcie0_irqs, int *pcie1_irqs); - void cns3xxx_power_off(void); - void cns3xxx_restart(enum reboot_mode, const char *); - ---- a/arch/arm/mach-cns3xxx/laguna.c -+++ b/arch/arm/mach-cns3xxx/laguna.c -@@ -21,6 +21,7 @@ - #include <linux/kernel.h> - #include <linux/compiler.h> - #include <linux/io.h> -+#include <linux/irq.h> - #include <linux/gpio.h> - #include <linux/dma-mapping.h> - #include <linux/serial_core.h> -@@ -873,12 +874,42 @@ static int laguna_register_gpio(struct g - return ret; - } - -+/* allow disabling of external isolated PCIe IRQs */ -+static int cns3xxx_pciextirq = 1; -+static int __init cns3xxx_pciextirq_disable(char *s) -+{ -+ cns3xxx_pciextirq = 0; -+ return 1; -+} -+__setup("noextirq", cns3xxx_pciextirq_disable); -+ - static int __init laguna_pcie_init(void) - { -+ u32 __iomem *mem = (void __iomem *)(CNS3XXX_GPIOB_BASE_VIRT + 0x0004); -+ u32 reg = (__raw_readl(mem) >> 26) & 0xf; -+ int irqs[] = { -+ IRQ_CNS3XXX_EXTERNAL_PIN0, -+ IRQ_CNS3XXX_EXTERNAL_PIN1, -+ IRQ_CNS3XXX_EXTERNAL_PIN2, -+ 154, -+ }; -+ - if (!machine_is_gw2388()) - return 0; - -- return cns3xxx_pcie_init(); -+ /* Verify GPIOB[26:29] == 0001b indicating support for ext irqs */ -+ if (cns3xxx_pciextirq && reg != 1) -+ cns3xxx_pciextirq = 0; -+ -+ if (cns3xxx_pciextirq) { -+ printk("laguna: using isolated PCI interrupts:" -+ " irq%d/irq%d/irq%d/irq%d\n", -+ irqs[0], irqs[1], irqs[2], irqs[3]); -+ return cns3xxx_pcie_init(irqs, NULL); -+ } -+ printk("laguna: using shared PCI interrupts: irq%d\n", -+ IRQ_CNS3XXX_PCIE0_DEVICE); -+ return cns3xxx_pcie_init(NULL, NULL); - } - subsys_initcall(laguna_pcie_init); - -@@ -893,8 +924,33 @@ static int __init laguna_model_setup(voi - printk("Running on Gateworks Laguna %s\n", laguna_info.model); - cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA, - NR_IRQS_CNS3XXX); -- cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB, -- NR_IRQS_CNS3XXX + 32); -+ -+ /* -+ * If pcie external interrupts are supported and desired -+ * configure IRQ types and configure pin function. -+ * Note that cns3xxx_pciextirq is enabled by default, but can be -+ * unset via the 'noextirq' kernel param or by laguna_pcie_init() if -+ * the baseboard model does not support this hardware feature. -+ */ -+ if (cns3xxx_pciextirq) { -+ mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0018); -+ reg = __raw_readl(mem); -+ /* GPIO26 is gpio, EXT_INT[0:2] not gpio func */ -+ reg &= ~0x3c000000; -+ reg |= 0x38000000; -+ __raw_writel(reg, mem); -+ -+ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, -+ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32); -+ -+ irq_set_irq_type(154, IRQ_TYPE_LEVEL_LOW); -+ irq_set_irq_type(93, IRQ_TYPE_LEVEL_HIGH); -+ irq_set_irq_type(94, IRQ_TYPE_LEVEL_HIGH); -+ irq_set_irq_type(95, IRQ_TYPE_LEVEL_HIGH); -+ } else { -+ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, -+ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32); -+ } - - if (strncmp(laguna_info.model, "GW", 2) == 0) { - if (laguna_info.config_bitmap & ETH0_LOAD) ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -18,6 +18,7 @@ - #include <linux/io.h> - #include <linux/ioport.h> - #include <linux/interrupt.h> -+#include <linux/irq.h> - #include <linux/ptrace.h> - #include <asm/mach/map.h> - #include "cns3xxx.h" -@@ -32,7 +33,7 @@ enum cns3xxx_access_type { - - struct cns3xxx_pcie { - struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES]; -- unsigned int irqs[2]; -+ unsigned int irqs[6]; - struct resource res_io; - struct resource res_mem; - struct hw_pci hw_pci; -@@ -255,7 +256,7 @@ static struct pci_ops cns3xxx_pcie_ops = - static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { - struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); -- int irq = cnspci->irqs[slot]; -+ int irq = cnspci->irqs[slot+pin-1]; - - pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", - pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), -@@ -298,7 +299,12 @@ static struct cns3xxx_pcie cns3xxx_pcie[ - .end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, -+ .irqs = { IRQ_CNS3XXX_PCIE0_RC, -+ IRQ_CNS3XXX_PCIE0_DEVICE, -+ IRQ_CNS3XXX_PCIE0_DEVICE, -+ IRQ_CNS3XXX_PCIE0_DEVICE, -+ IRQ_CNS3XXX_PCIE0_DEVICE, -+ }, - .hw_pci = { - .domain = 0, - .nr_controllers = 1, -@@ -340,7 +346,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[ - .end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, -+ .irqs = { -+ IRQ_CNS3XXX_PCIE1_RC, -+ IRQ_CNS3XXX_PCIE1_DEVICE, -+ IRQ_CNS3XXX_PCIE1_DEVICE, -+ IRQ_CNS3XXX_PCIE1_DEVICE, -+ IRQ_CNS3XXX_PCIE1_DEVICE, -+ }, - .hw_pci = { - .domain = 1, - .nr_controllers = 1, -@@ -460,13 +472,22 @@ void __init cns3xxx_pcie_iotable_init() - } - } - --int __init cns3xxx_pcie_init(void) -+int __init cns3xxx_pcie_init(int *pcie0_irqs, int *pcie1_irqs) - { - int i; - - pcibios_min_io = 0; - pcibios_min_mem = 0; - -+ if (pcie0_irqs) { -+ for (i = 0; i < 4; i++) -+ cns3xxx_pcie[0].irqs[i+1] = pcie0_irqs[i]; -+ } -+ if (pcie1_irqs) { -+ for (i = 0; i < 4; i++) -+ cns3xxx_pcie[1].irqs[i+1] = pcie1_irqs[i]; -+ } -+ - hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, - "imprecise external abort"); - diff --git a/target/linux/cns3xxx/patches-3.14/120-backport_pcie_topology_fix.patch b/target/linux/cns3xxx/patches-3.14/120-backport_pcie_topology_fix.patch deleted file mode 100644 index 4f68e6f..0000000 --- a/target/linux/cns3xxx/patches-3.14/120-backport_pcie_topology_fix.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -71,7 +71,7 @@ static void __iomem *cns3xxx_pci_cfg_bas - void __iomem *base; - - /* If there is no link, just show the CNS PCI bridge. */ -- if (!cnspci->linked && (busno > 0 || slot > 0)) -+ if (!cnspci->linked && (busno > 0)) - return NULL; - - /* -@@ -80,15 +80,19 @@ static void __iomem *cns3xxx_pci_cfg_bas - * the first device on the same bus as the CNS PCI bridge. - */ - if (busno == 0) { -- if (slot > 1) -+ type = CNS3XXX_HOST_TYPE; -+ if (devfn) -+ return NULL; -+ } else if (busno == 1) { -+ type = CNS3XXX_CFG0_TYPE; -+ if (slot) - return NULL; -- type = slot; - } else { - type = CNS3XXX_CFG1_TYPE; - } - - base = (void __iomem *)cnspci->cfg_bases[type].virtual; -- offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc); -+ offset = (devfn << 12) | (where & 0xffc); - - return base + offset; - } -@@ -256,7 +260,7 @@ static struct pci_ops cns3xxx_pcie_ops = - static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { - struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); -- int irq = cnspci->irqs[slot+pin-1]; -+ int irq = cnspci->irqs[!!dev->bus->number+pin-1]; - - pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", - pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), -@@ -434,7 +438,8 @@ static void __init cns3xxx_pcie_hw_init( - return; - - /* Set Device Max_Read_Request_Size to 128 byte */ -- devfn = PCI_DEVFN(1, 0); -+ bus.number = 1; -+ devfn = PCI_DEVFN(0, 0); - pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP); - pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc); - dc &= ~(0x3 << 12); /* Clear Device Control Register [14:12] */ diff --git a/target/linux/cns3xxx/patches-3.14/121-pcie_fix_bridge_access.patch b/target/linux/cns3xxx/patches-3.14/121-pcie_fix_bridge_access.patch deleted file mode 100644 index d3907bd..0000000 --- a/target/linux/cns3xxx/patches-3.14/121-pcie_fix_bridge_access.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-cns3xxx/pcie.c -+++ b/arch/arm/mach-cns3xxx/pcie.c -@@ -93,6 +93,8 @@ static void __iomem *cns3xxx_pci_cfg_bas - - base = (void __iomem *)cnspci->cfg_bases[type].virtual; - offset = (devfn << 12) | (where & 0xffc); -+ if (busno > 1) -+ offset += busno << 20; - - return base + offset; - } diff --git a/target/linux/cns3xxx/patches-3.14/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-3.14/200-broadcom_phy_reinit.patch deleted file mode 100644 index bfec081..0000000 --- a/target/linux/cns3xxx/patches-3.14/200-broadcom_phy_reinit.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/net/phy/broadcom.c -+++ b/drivers/net/phy/broadcom.c -@@ -567,6 +567,11 @@ static int bcm5481_config_aneg(struct ph - /* Write bits 14:0. */ - reg |= (1 << 15); - phy_write(phydev, 0x18, reg); -+ } else { -+ phy_write(phydev, 0x18, 0xf1e7); -+ phy_write(phydev, 0x1c, 0x8e00); -+ -+ phy_write(phydev, 0x1c, 0xa41f); - } - - return ret; diff --git a/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch deleted file mode 100644 index 00081c4..0000000 --- a/target/linux/cns3xxx/patches-3.14/210-dwc2_defaults.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -75,6 +75,34 @@ static const struct dwc2_core_params par - .uframe_sched = 0, - }; - -+static const struct dwc2_core_params params_cns3xxx = { -+ .otg_cap = 2, /* non-HNP/non-SRP capable */ -+ .otg_ver = 0, /* 1.3 */ -+ .dma_enable = 1, -+ .dma_desc_enable = 0, -+ .speed = 0, /* High Speed */ -+ .enable_dynamic_fifo = 1, -+ .en_multiple_tx_fifo = 1, -+ .host_rx_fifo_size = 658, /* 774 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */ -+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */ -+ .max_transfer_size = 65535, -+ .max_packet_count = 511, -+ .host_channels = 16, -+ .phy_type = 1, /* UTMI */ -+ .phy_utmi_width = 16, /* 8 bits */ -+ .phy_ulpi_ddr = 0, /* Single */ -+ .phy_ulpi_ext_vbus = 0, -+ .i2c_enable = 0, -+ .ulpi_fs_ls = 0, -+ .host_support_fs_ls_low_power = 0, -+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */ -+ .ts_dline = 0, -+ .reload_ctl = 0, -+ .ahbcfg = 0x10, -+ .uframe_sched = 0, -+}; -+ - /** - * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the - * DWC_otg driver -@@ -134,6 +162,9 @@ static int dwc2_driver_probe(struct plat - /* Default all params to autodetect */ - dwc2_set_all_params(&defparams, -1); - params = &defparams; -+#ifdef CONFIG_ARCH_CNS3XXX -+ params = ¶ms_cns3xxx; -+#endif - } - - hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); |