diff options
| -rw-r--r-- | target/linux/ar71xx/config-3.3 | 1 | ||||
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c | 131 | ||||
| -rw-r--r-- | target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch | 39 |
3 files changed, 171 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3 index ec12afd..45e589e 100644 --- a/target/linux/ar71xx/config-3.3 +++ b/target/linux/ar71xx/config-3.3 @@ -30,6 +30,7 @@ CONFIG_ATH79_MACH_AP81=y CONFIG_ATH79_MACH_AP83=y CONFIG_ATH79_MACH_AP96=y CONFIG_ATH79_MACH_AW_NR580=y +CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c new file mode 100644 index 0000000..18944c4 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c @@ -0,0 +1,131 @@ +/* + * Senao CAP4200AG board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define CAP4200AG_GPIO_LED_PWR_GREEN 12 +#define CAP4200AG_GPIO_LED_PWR_AMBER 13 +#define CAP4200AG_GPIO_LED_LAN_GREEN 14 +#define CAP4200AG_GPIO_LED_LAN_AMBER 15 +#define CAP4200AG_GPIO_LED_WLAN_GREEN 18 +#define CAP4200AG_GPIO_LED_WLAN_AMBER 19 + +#define CAP4200AG_GPIO_BTN_RESET 17 + +#define CAP4200AG_KEYS_POLL_INTERVAL 20 /* msecs */ +#define CAP4200AG_KEYS_DEBOUNCE_INTERVAL (3 * CAP4200AG_KEYS_POLL_INTERVAL) + +#define CAP4200AG_MAC_OFFSET 0 +#define CAP4200AG_WMAC_CALDATA_OFFSET 0x1000 +#define CAP4200AG_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led cap4200ag_leds_gpio[] __initdata = { + { + .name = "senao:green:pwr", + .gpio = CAP4200AG_GPIO_LED_PWR_GREEN, + .active_low = 1, + }, + { + .name = "senao:amber:pwr", + .gpio = CAP4200AG_GPIO_LED_PWR_AMBER, + .active_low = 1, + }, + { + .name = "senao:green:lan", + .gpio = CAP4200AG_GPIO_LED_LAN_GREEN, + .active_low = 1, + }, + { + .name = "senao:amber:lan", + .gpio = CAP4200AG_GPIO_LED_LAN_AMBER, + .active_low = 1, + }, + { + .name = "senao:green:wlan", + .gpio = CAP4200AG_GPIO_LED_WLAN_GREEN, + .active_low = 1, + }, + { + .name = "senao:amber:wlan", + .gpio = CAP4200AG_GPIO_LED_WLAN_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_keys_button cap4200ag_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = CAP4200AG_KEYS_DEBOUNCE_INTERVAL, + .gpio = CAP4200AG_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init cap4200ag_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 mac[6]; + + ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_GREEN, + AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_AMBER, + AR934X_GPIO_OUT_GPIO); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cap4200ag_leds_gpio), + cap4200ag_leds_gpio); + ath79_register_gpio_keys_polled(-1, CAP4200AG_KEYS_POLL_INTERVAL, + ARRAY_SIZE(cap4200ag_gpio_keys), + cap4200ag_gpio_keys); + + ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -1); + ath79_wmac_disable_2ghz(); + ath79_register_wmac(art + CAP4200AG_WMAC_CALDATA_OFFSET, mac); + + ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -2); + ap91_pci_init(art + CAP4200AG_PCIE_CALDATA_OFFSET, mac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, + art + CAP4200AG_MAC_OFFSET, -2); + + /* GMAC0 is connected to an external PHY */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_CAP4200AG, "CAP4200AG", "Senao CAP4200AG", + cap4200ag_setup); diff --git a/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch new file mode 100644 index 0000000..39cef42 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/611-MIPS-ath79-CAP4200AG-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -403,6 +403,16 @@ config ATH79_MACH_RW2458N + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_CAP4200AG ++ bool "Senao CAP4200AG support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_EAP7660D + bool "Senao EAP7660D support" + select SOC_AR71XX +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -29,6 +29,7 @@ enum ath79_mach_type { + ATH79_MACH_AP83, /* Atheros AP83 */ + ATH79_MACH_AP96, /* Atheros AP96 */ + ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ ++ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP81) += mach-a + obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o + obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o ++obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o + obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o |