diff options
11 files changed, 140 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index ba4787b..e0a4a39 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -48,6 +48,9 @@ get_status_led() { nw718) status_led="nw718:amber:cpu" ;; + omni-emb) + status_led="emb:green:status" + ;; pwh2004) status_led="pwh2004:green:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 920c8a3..d6db35c 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -53,6 +53,7 @@ case "$FIRMWARE" in pwh2004 | \ nbg-419n | \ nw718 | \ + omni-emb | \ rt-n15 | \ v22rw-2x2 | \ wcr-150gn | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 4261a6c..0518b7b 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -20,7 +20,8 @@ preinit_set_mac_address() { ifconfig eth0 hw ether $mac 2>/dev/null ;; hw550-3g |\ - nbg-419n) + nbg-419n |\ + omni-emb) mac=$(ramips_get_mac_binary factory 40) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index b41a153..7d45bde 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -80,6 +80,9 @@ ramips_board_name() { *"NW718") name="nw718" ;; + *"Omnima MiniEMBWiFi") + name="omni-emb" + ;; *"PWH2004") name="pwh2004" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4cb4c50..03a1e7b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -23,6 +23,7 @@ platform_check_image() { mofi3500-3gn | \ nbg-419n | \ nw718 | \ + omni-emb | \ rt-g32-b1 | \ rt-n15 | \ v22rw-2x2 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 72cd9c7..211f72c 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -32,6 +32,7 @@ enum ramips_mach_type { RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */ RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ + RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index e8a1a25..cf8ede3 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -56,6 +56,11 @@ config RT305X_MACH_BC2 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_OMNI_EMB + bool "Omnima MiniEMBWiFi" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_PWH2004 bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 76a7830..be3d308 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o +obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c new file mode 100644 index 0000000..87acf4d --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c @@ -0,0 +1,111 @@ +/* + * Omnima MiniEMBWiFi board support + * + * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */ + +#define OMNI_EMB_BUTTONS_POLL_INTERVAL 20 + +#define OMNI_EMB_GPIO_LED_STATUS 9 +#define OMNI_EMB_GPIO_LED_WLAN 14 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition emb_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + }, { + .name = "uboot-config", + .offset = 0x030000, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x050000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "linux", + .offset = 0x050000, + .size = 0x100000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x6B0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data omni_emb_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(emb_partitions), + .parts = emb_partitions, +#endif +}; + +static struct gpio_led omni_emb_leds_gpio[] __initdata = { + { + .name = "emb:green:status", + .gpio = OMNI_EMB_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "emb:green:wlan", + .gpio = OMNI_EMB_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_button omni_emb_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = OMNI_EMB_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init omni_emb_init(void) +{ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio), + omni_emb_leds_gpio); + ramips_register_gpio_buttons(-1, OMNI_EMB_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(omni_emb_gpio_buttons), + omni_emb_gpio_buttons); + + rt305x_register_flash(0, &omni_emb_flash_data); + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi", + omni_emb_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 24f5966..4f92d30 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -139,6 +139,12 @@ define Image/Build/Template/NW718 $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120) endef +console_OMNIEMB=ttyS1,57600 +mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware) +define Image/Build/Template/OMNIEMB + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352) +endef + define Image/Build/Profile/DIR300B1 $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) @@ -173,6 +179,10 @@ define Image/Build/Profile/NW718 $(call Image/Build/Template/NW718,$(1),nw718,NW718) endef +define Image/Build/Profile/OMNIEMB + $(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB) +endef + define Image/Build/Profile/PWH2004 $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004) endef @@ -248,6 +258,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/V22RW2X2,$(1)) $(call Image/Build/Profile/NBG419N,$(1)) $(call Image/Build/Profile/NW718,$(1)) + $(call Image/Build/Profile/OMNIEMB,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 5d7e4b1..e3553e1 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -100,6 +100,7 @@ CONFIG_RT305X_MACH_HW550_3G=y CONFIG_RT305X_MACH_MOFI3500_3GN=y CONFIG_RT305X_MACH_NBG_419N=y CONFIG_RT305X_MACH_NW718=y +CONFIG_RT305X_MACH_OMNI_EMB=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_V22RW_2X2=y |