summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--package/boot/uboot-lantiq/Makefile4
-rw-r--r--package/boot/uboot-lantiq/README6
-rw-r--r--package/boot/uboot-lantiq/patches/0001-sf-fix-out-of-order-calls-for-spi_claim_bus-and-spi_.patch175
-rw-r--r--package/boot/uboot-lantiq/patches/0002-sf-consistently-use-debug-for-warning-error-messages.patch54
-rw-r--r--package/boot/uboot-lantiq/patches/0002-sf-handle-CONFIG_MANUAL_RELOC.patch46
-rw-r--r--package/boot/uboot-lantiq/patches/0003-sf-factor-out-malloc-from-SPI-flash-drivers.patch719
-rw-r--r--package/boot/uboot-lantiq/patches/0003-sf-move-malloc-of-spi_flash-to-spi_flash_probe.patch115
-rw-r--r--package/boot/uboot-lantiq/patches/0004-sf-add-malloc-free-probe-functions-dedicated-for-SPL.patch131
-rw-r--r--package/boot/uboot-lantiq/patches/0004-sf-add-slim-probe-funtions-for-SPL.patch87
-rw-r--r--package/boot/uboot-lantiq/patches/0005-sf-factor-out-the-flash-address-calculation.patch107
-rw-r--r--package/boot/uboot-lantiq/patches/0005-sf-make-calculatiom-of-address-bytes-completely-conf.patch143
-rw-r--r--package/boot/uboot-lantiq/patches/0006-sf-add-generic-support-for-4-byte-address-mode.patch161
-rw-r--r--package/boot/uboot-lantiq/patches/0006-sf-add-support-for-4-byte-addressing.patch169
-rw-r--r--package/boot/uboot-lantiq/patches/0007-sf-add-support-for-EN25QH256.patch22
-rw-r--r--package/boot/uboot-lantiq/patches/0007-sf-eon-use-16-bit-ID-for-comparison.patch45
-rw-r--r--package/boot/uboot-lantiq/patches/0008-sf-eon-add-support-for-4-byte-address-mode.patch43
-rw-r--r--package/boot/uboot-lantiq/patches/0008-sf-fix-sector-layout-of-S25FL256S_256K-and-S25FL512S.patch26
-rw-r--r--package/boot/uboot-lantiq/patches/0009-net-switchlib-add-framework-for-ethernet-switch-driv.patch (renamed from package/boot/uboot-lantiq/patches/0019-net-switchlib-add-framework-for-ethernet-switch-driv.patch)51
-rw-r--r--package/boot/uboot-lantiq/patches/0009-sf-eon-add-support-for-EN25QH256.patch21
-rw-r--r--package/boot/uboot-lantiq/patches/0010-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch (renamed from package/boot/uboot-lantiq/patches/0020-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch)27
-rw-r--r--package/boot/uboot-lantiq/patches/0010-sf-spansion-fix-device-IDs-and-sector-architecture-f.patch30
-rw-r--r--package/boot/uboot-lantiq/patches/0011-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch (renamed from package/boot/uboot-lantiq/patches/0021-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch)27
-rw-r--r--package/boot/uboot-lantiq/patches/0011-sf-spansion-add-support-for-4-byte-address-mode.patch55
-rw-r--r--package/boot/uboot-lantiq/patches/0012-net-switchlib-add-driver-for-Atheros-AR8216.patch (renamed from package/boot/uboot-lantiq/patches/0022-net-switchlib-add-driver-for-Atheros-AR8216.patch)29
-rw-r--r--package/boot/uboot-lantiq/patches/0012-sf-spansion-add-support-for-S25FL512S.patch23
-rw-r--r--package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driver-for-REALTEK-RTL8306.patch387
-rw-r--r--package/boot/uboot-lantiq/patches/0013-sf-macronix-add-support-for-4-byte-address-mode.patch44
-rw-r--r--package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch (renamed from package/boot/uboot-lantiq/patches/0023-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch)2302
-rw-r--r--package/boot/uboot-lantiq/patches/0014-sf-macronix-add-support-for-MX25L25635E.patch21
-rw-r--r--package/boot/uboot-lantiq/patches/0015-MIPS-lantiq-add-support-for-Lantiq-XWAY-ARX100-SoC-f.patch1283
-rw-r--r--package/boot/uboot-lantiq/patches/0015-sf-macronix-add-support-for-MX66L51235L.patch21
-rw-r--r--package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch559
-rw-r--r--package/boot/uboot-lantiq/patches/0016-sf-add-MTD-layer-driver-for-SPI-flash-devices.patch133
-rw-r--r--package/boot/uboot-lantiq/patches/0017-sf-add-init-function.patch57
-rw-r--r--package/boot/uboot-lantiq/patches/0017-tools-add-some-helper-tools-for-Lantiq-SoCs.patch (renamed from package/boot/uboot-lantiq/patches/0029-tools-add-some-helper-tools-for-Lantiq-SoCs.patch)215
-rw-r--r--package/boot/uboot-lantiq/patches/0018-MIPS-add-SPI-flash-init-hook.patch47
-rw-r--r--package/boot/uboot-lantiq/patches/0018-tools-lantiq-add-NAND-SPL-support.patch228
-rw-r--r--package/boot/uboot-lantiq/patches/0019-Makefile-add-Lantiq-NAND-SPL-images.patch53
-rw-r--r--package/boot/uboot-lantiq/patches/0020-MIPS-lantiq-add-NAND-SPL-support.patch172
-rw-r--r--package/boot/uboot-lantiq/patches/0021-MIPS-vrx200-add-NAND-SPL-support.patch37
-rw-r--r--package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch68
-rw-r--r--package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch56
-rw-r--r--package/boot/uboot-lantiq/patches/0024-MIPS-VRX200-add-option-to-boot-from-AVM-EVA-loader.patch33
-rw-r--r--package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch31
-rw-r--r--package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch31
-rw-r--r--package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch (renamed from package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-Arcadyan-ARV4519.patch)114
-rw-r--r--package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch114
-rw-r--r--package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch268
-rw-r--r--package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch (renamed from package/boot/uboot-lantiq/patches/0025-MIPS-add-board-support-for-AVM-FritzBox-3370.patch)107
-rw-r--r--package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch (renamed from package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Gigaset-SX76X.patch)99
-rw-r--r--package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch327
-rw-r--r--package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch271
-rw-r--r--package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch324
-rw-r--r--package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch262
-rw-r--r--package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch321
-rw-r--r--package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch297
-rw-r--r--package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch262
-rw-r--r--package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch264
-rw-r--r--package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch289
-rw-r--r--package/boot/uboot-lantiq/patches/0040-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch23
60 files changed, 8333 insertions, 3103 deletions
diff --git a/package/boot/uboot-lantiq/Makefile b/package/boot/uboot-lantiq/Makefile
index b71b1e8..9bf6c01 100644
--- a/package/boot/uboot-lantiq/Makefile
+++ b/package/boot/uboot-lantiq/Makefile
@@ -8,7 +8,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=u-boot
-PKG_VERSION:=2013.01
+PKG_VERSION:=2013.10
PKG_RELEASE:=1
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -16,7 +16,7 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \
http://mirror2.openwrt.org/sources \
ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=e58a8a7f78972248190d83de0dc362ce
+PKG_MD5SUM:=a076a044b64371edc52f7e562b13f6b2
PKG_TARGETS:=bin
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
diff --git a/package/boot/uboot-lantiq/README b/package/boot/uboot-lantiq/README
new file mode 100644
index 0000000..44ed2bb
--- /dev/null
+++ b/package/boot/uboot-lantiq/README
@@ -0,0 +1,6 @@
+# How to refresh patches
+
+$ git clone git@github.com:danielschwierzeck/u-boot-lantiq.git
+$ mkdir -p $OPENWRT_ROOT/packages/boot/uboot-lantiq/patches
+$ cd u-boot-lantiq.git
+$ git format-patch -p -k --no-renames --no-binary -o $OPENWRT_ROOT/package/boot/uboot-lantiq/patches v2013.10..u-boot-lantiq-v2013.10-openwrtN
diff --git a/package/boot/uboot-lantiq/patches/0001-sf-fix-out-of-order-calls-for-spi_claim_bus-and-spi_.patch b/package/boot/uboot-lantiq/patches/0001-sf-fix-out-of-order-calls-for-spi_claim_bus-and-spi_.patch
new file mode 100644
index 0000000..b5d7ac8
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0001-sf-fix-out-of-order-calls-for-spi_claim_bus-and-spi_.patch
@@ -0,0 +1,175 @@
+From 909840ef844013379e5ec399c1e76c65d1a6eb1d Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sat, 12 Oct 2013 21:09:47 +0200
+Subject: sf: fix out-of-order calls for spi_claim_bus and spi_release_bus
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
+index 108665f..d34747b 100644
+--- a/drivers/mtd/spi/sf_ops.c
++++ b/drivers/mtd/spi/sf_ops.c
+@@ -132,12 +132,6 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ if (buf == NULL)
+ timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT;
+
+- ret = spi_claim_bus(flash->spi);
+- if (ret) {
+- debug("SF: unable to claim SPI bus\n");
+- return ret;
+- }
+-
+ ret = spi_flash_cmd_write_enable(flash);
+ if (ret < 0) {
+ debug("SF: enabling write failed\n");
+@@ -158,8 +152,6 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ return ret;
+ }
+
+- spi_release_bus(spi);
+-
+ return ret;
+ }
+
+@@ -175,12 +167,18 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ return -1;
+ }
+
++ ret = spi_claim_bus(flash->spi);
++ if (ret) {
++ debug("SF: unable to claim SPI bus\n");
++ return ret;
++ }
++
+ cmd[0] = flash->erase_cmd;
+ while (len) {
+ #ifdef CONFIG_SPI_FLASH_BAR
+ ret = spi_flash_bank(flash, offset);
+ if (ret < 0)
+- return ret;
++ goto done;
+ #endif
+ spi_flash_addr(offset, cmd);
+
+@@ -190,13 +188,16 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
+ if (ret < 0) {
+ debug("SF: erase failed\n");
+- break;
++ goto done;
+ }
+
+ offset += erase_size;
+ len -= erase_size;
+ }
+
++done:
++ spi_release_bus(flash->spi);
++
+ return ret;
+ }
+
+@@ -208,6 +209,12 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ u8 cmd[4];
+ int ret = -1;
+
++ ret = spi_claim_bus(flash->spi);
++ if (ret) {
++ debug("SF: unable to claim SPI bus\n");
++ return ret;
++ }
++
+ page_size = flash->page_size;
+
+ cmd[0] = CMD_PAGE_PROGRAM;
+@@ -215,7 +222,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ #ifdef CONFIG_SPI_FLASH_BAR
+ ret = spi_flash_bank(flash, offset);
+ if (ret < 0)
+- return ret;
++ goto done;
+ #endif
+ byte_addr = offset % page_size;
+ chunk_len = min(len - actual, page_size - byte_addr);
+@@ -232,12 +239,15 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: write failed\n");
+- break;
++ goto done;
+ }
+
+ offset += chunk_len;
+ }
+
++done:
++ spi_release_bus(flash->spi);
++
+ return ret;
+ }
+
+@@ -247,20 +257,12 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ struct spi_slave *spi = flash->spi;
+ int ret;
+
+- ret = spi_claim_bus(flash->spi);
+- if (ret) {
+- debug("SF: unable to claim SPI bus\n");
+- return ret;
+- }
+-
+ ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len);
+ if (ret < 0) {
+ debug("SF: read cmd failed\n");
+ return ret;
+ }
+
+- spi_release_bus(spi);
+-
+ return ret;
+ }
+
+@@ -271,6 +273,12 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ u32 remain_len, read_len;
+ int ret = -1;
+
++ ret = spi_claim_bus(flash->spi);
++ if (ret) {
++ debug("SF: unable to claim SPI bus\n");
++ return ret;
++ }
++
+ /* Handle memory-mapped SPI */
+ if (flash->memory_map) {
+ spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP);
+@@ -289,7 +297,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+ if (ret) {
+ debug("SF: fail to set bank%d\n", bank_sel);
+- return ret;
++ goto done;
+ }
+ #endif
+ remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1)) - offset;
+@@ -304,7 +312,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ data, read_len);
+ if (ret < 0) {
+ debug("SF: read failed\n");
+- break;
++ goto done;
+ }
+
+ offset += read_len;
+@@ -312,6 +320,9 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ data += read_len;
+ }
+
++done:
++ spi_release_bus(flash->spi);
++
+ return ret;
+ }
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0002-sf-consistently-use-debug-for-warning-error-messages.patch b/package/boot/uboot-lantiq/patches/0002-sf-consistently-use-debug-for-warning-error-messages.patch
new file mode 100644
index 0000000..597c2c1
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0002-sf-consistently-use-debug-for-warning-error-messages.patch
@@ -0,0 +1,54 @@
+From bb7df8c6ff30be3786483767d3afb0e77a69a640 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sat, 12 Oct 2013 21:21:18 +0200
+Subject: sf: consistently use debug() for warning/error messages
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 5eb8ffe..04356f1 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -176,8 +176,8 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ }
+
+ if (i == ARRAY_SIZE(spi_flash_params_table)) {
+- printf("SF: Unsupported flash IDs: ");
+- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
++ debug("SF: Unsupported flash IDs: ");
++ debug("manuf %02x, jedec %04x, ext_jedec %04x\n",
+ idcode[0], jedec, ext_jedec);
+ return NULL;
+ }
+@@ -296,7 +296,7 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ /* Setup spi_slave */
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+- printf("SF: Failed to set up slave\n");
++ debug("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+@@ -310,7 +310,7 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+ if (ret) {
+- printf("SF: Failed to get idcodes\n");
++ debug("SF: Failed to get idcodes\n");
+ goto err_read_id;
+ }
+
+@@ -341,8 +341,8 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ #endif
+ #ifndef CONFIG_SPI_FLASH_BAR
+ if (flash->size > SPI_FLASH_16MB_BOUN) {
+- puts("SF: Warning - Only lower 16MiB accessible,");
+- puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
++ debug("SF: Warning - Only lower 16MiB accessible,");
++ debug(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+ }
+ #endif
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0002-sf-handle-CONFIG_MANUAL_RELOC.patch b/package/boot/uboot-lantiq/patches/0002-sf-handle-CONFIG_MANUAL_RELOC.patch
deleted file mode 100644
index 63a21af..0000000
--- a/package/boot/uboot-lantiq/patches/0002-sf-handle-CONFIG_MANUAL_RELOC.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 60e8a35f0efa5a7e5d797a3f239971c84061ef11 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 21:39:47 +0100
-Subject: sf: handle CONFIG_MANUAL_RELOC
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -293,7 +293,7 @@ int spi_flash_cmd_write_status(struct sp
- */
- #define IDCODE_CONT_LEN 0
- #define IDCODE_PART_LEN 5
--static const struct {
-+static struct {
- const u8 shift;
- const u8 idcode;
- struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-@@ -335,6 +335,10 @@ static const struct {
- };
- #define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
-
-+#ifdef CONFIG_NEEDS_MANUAL_RELOC
-+DECLARE_GLOBAL_DATA_PTR;
-+#endif
-+
- struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
- {
-@@ -342,6 +346,16 @@ struct spi_flash *spi_flash_probe(unsign
- struct spi_flash *flash = NULL;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
-+#ifdef CONFIG_NEEDS_MANUAL_RELOC
-+ static int relocated;
-+
-+ if (!relocated) {
-+ for (i = 0; i < ARRAY_SIZE(flashes); i++)
-+ flashes[i].probe += gd->reloc_off;
-+
-+ relocated = 1;
-+ }
-+#endif
-
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- if (!spi) {
diff --git a/package/boot/uboot-lantiq/patches/0003-sf-factor-out-malloc-from-SPI-flash-drivers.patch b/package/boot/uboot-lantiq/patches/0003-sf-factor-out-malloc-from-SPI-flash-drivers.patch
deleted file mode 100644
index 7f44675..0000000
--- a/package/boot/uboot-lantiq/patches/0003-sf-factor-out-malloc-from-SPI-flash-drivers.patch
+++ /dev/null
@@ -1,719 +0,0 @@
-From 73d127565b5a4b19bcaacabc505689ee039f16fd Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Sun, 11 Nov 2012 03:11:38 +0100
-Subject: sf: factor out malloc from SPI flash drivers
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/atmel.c
-+++ b/drivers/mtd/spi/atmel.c
-@@ -40,18 +40,6 @@ struct atmel_spi_flash_params {
- const char *name;
- };
-
--/* spi_flash needs to be first so upper layers can free() it */
--struct atmel_spi_flash {
-- struct spi_flash flash;
-- const struct atmel_spi_flash_params *params;
--};
--
--static inline struct atmel_spi_flash *
--to_atmel_spi_flash(struct spi_flash *flash)
--{
-- return container_of(flash, struct atmel_spi_flash, flash);
--}
--
- static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
- {
- .idcode1 = 0x22,
-@@ -156,7 +144,8 @@ static int at45_wait_ready(struct spi_fl
- * Assemble the address part of a command for AT45 devices in
- * non-power-of-two page size mode.
- */
--static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset)
-+static void at45_build_address(const struct atmel_spi_flash_params *params,
-+ u8 *cmd, u32 offset)
- {
- unsigned long page_addr;
- unsigned long byte_addr;
-@@ -167,7 +156,7 @@ static void at45_build_address(struct at
- * The "extra" space per page is the power-of-two page size
- * divided by 32.
- */
-- page_shift = asf->params->l2_page_size;
-+ page_shift = params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
-@@ -181,11 +170,11 @@ static void at45_build_address(struct at
- static int dataflash_read_fast_at45(struct spi_flash *flash,
- u32 offset, size_t len, void *buf)
- {
-- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
-+ const struct atmel_spi_flash_params *params = flash->priv;
- u8 cmd[5];
-
- cmd[0] = CMD_READ_ARRAY_FAST;
-- at45_build_address(asf, cmd + 1, offset);
-+ at45_build_address(params, cmd + 1, offset);
- cmd[4] = 0x00;
-
- return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
-@@ -197,7 +186,7 @@ static int dataflash_read_fast_at45(stru
- static int dataflash_write_p2(struct spi_flash *flash,
- u32 offset, size_t len, const void *buf)
- {
-- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
-+ const struct atmel_spi_flash_params *params = flash->priv;
- unsigned long page_size;
- u32 addr = offset;
- size_t chunk_len;
-@@ -211,7 +200,7 @@ static int dataflash_write_p2(struct spi
- * the other is being programmed into main memory.
- */
-
-- page_size = (1 << asf->params->l2_page_size);
-+ page_size = (1 << params->l2_page_size);
-
- ret = spi_claim_bus(flash->spi);
- if (ret) {
-@@ -263,7 +252,7 @@ out:
- static int dataflash_write_at45(struct spi_flash *flash,
- u32 offset, size_t len, const void *buf)
- {
-- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
-+ const struct atmel_spi_flash_params *params = flash->priv;
- unsigned long page_addr;
- unsigned long byte_addr;
- unsigned long page_size;
-@@ -279,7 +268,7 @@ static int dataflash_write_at45(struct s
- * the other is being programmed into main memory.
- */
-
-- page_shift = asf->params->l2_page_size;
-+ page_shift = params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
-@@ -338,7 +327,7 @@ out:
- */
- static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len)
- {
-- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
-+ const struct atmel_spi_flash_params *params = flash->priv;
- unsigned long page_size;
-
- size_t actual;
-@@ -351,7 +340,7 @@ static int dataflash_erase_p2(struct spi
- * when possible.
- */
-
-- page_size = (1 << asf->params->l2_page_size);
-+ page_size = (1 << params->l2_page_size);
-
- if (offset % page_size || len % page_size) {
- debug("SF: Erase offset/length not multiple of page size\n");
-@@ -397,7 +386,7 @@ out:
-
- static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
- {
-- struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
-+ const struct atmel_spi_flash_params *params = flash->priv;
- unsigned long page_addr;
- unsigned long page_size;
- unsigned int page_shift;
-@@ -411,7 +400,7 @@ static int dataflash_erase_at45(struct s
- * when possible.
- */
-
-- page_shift = asf->params->l2_page_size;
-+ page_shift = params->l2_page_size;
- page_size = (1 << page_shift) + (1 << (page_shift - 5));
- page_shift++;
- page_addr = offset / page_size;
-@@ -458,12 +447,12 @@ out:
- return ret;
- }
-
--struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_atmel(struct spi_flash *flash, u8 *idcode)
- {
- const struct atmel_spi_flash_params *params;
-+ struct spi_slave *spi = flash->spi;
- unsigned page_size;
- unsigned int family;
-- struct atmel_spi_flash *asf;
- unsigned int i;
- int ret;
- u8 status;
-@@ -477,18 +466,11 @@ struct spi_flash *spi_flash_probe_atmel(
- if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
- debug("SF: Unsupported DataFlash ID %02x\n",
- idcode[1]);
-- return NULL;
-- }
--
-- asf = malloc(sizeof(struct atmel_spi_flash));
-- if (!asf) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-+ return 0;
- }
-
-- asf->params = params;
-- asf->flash.spi = spi;
-- asf->flash.name = params->name;
-+ flash->priv = (void *)params;
-+ flash->name = params->name;
-
- /* Assuming power-of-two page size initially. */
- page_size = 1 << params->l2_page_size;
-@@ -503,48 +485,44 @@ struct spi_flash *spi_flash_probe_atmel(
- */
- ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1);
- if (ret)
-- goto err;
-+ return -1;
-
- debug("SF: AT45 status register: %02x\n", status);
-
- if (!(status & AT45_STATUS_P2_PAGE_SIZE)) {
-- asf->flash.read = dataflash_read_fast_at45;
-- asf->flash.write = dataflash_write_at45;
-- asf->flash.erase = dataflash_erase_at45;
-+ flash->read = dataflash_read_fast_at45;
-+ flash->write = dataflash_write_at45;
-+ flash->erase = dataflash_erase_at45;
- page_size += 1 << (params->l2_page_size - 5);
- } else {
-- asf->flash.read = spi_flash_cmd_read_fast;
-- asf->flash.write = dataflash_write_p2;
-- asf->flash.erase = dataflash_erase_p2;
-+ flash->read = spi_flash_cmd_read_fast;
-+ flash->write = dataflash_write_p2;
-+ flash->erase = dataflash_erase_p2;
- }
-
-- asf->flash.page_size = page_size;
-- asf->flash.sector_size = page_size;
-+ flash->page_size = page_size;
-+ flash->sector_size = page_size;
- break;
-
- case DF_FAMILY_AT26F:
- case DF_FAMILY_AT26DF:
-- asf->flash.read = spi_flash_cmd_read_fast;
-- asf->flash.write = spi_flash_cmd_write_multi;
-- asf->flash.erase = spi_flash_cmd_erase;
-- asf->flash.page_size = page_size;
-- asf->flash.sector_size = 4096;
-+ flash->read = spi_flash_cmd_read_fast;
-+ flash->write = spi_flash_cmd_write_multi;
-+ flash->erase = spi_flash_cmd_erase;
-+ flash->page_size = page_size;
-+ flash->sector_size = 4096;
- /* clear SPRL# bit for locked flash */
-- spi_flash_cmd_write_status(&asf->flash, 0);
-+ spi_flash_cmd_write_status(flash, 0);
- break;
-
- default:
- debug("SF: Unsupported DataFlash family %u\n", family);
-- goto err;
-+ return -1;
- }
-
-- asf->flash.size = page_size * params->pages_per_block
-+ flash->size = page_size * params->pages_per_block
- * params->blocks_per_sector
- * params->nr_sectors;
-
-- return &asf->flash;
--
--err:
-- free(asf);
-- return NULL;
-+ return 1;
- }
---- a/drivers/mtd/spi/eon.c
-+++ b/drivers/mtd/spi/eon.c
-@@ -29,10 +29,9 @@ static const struct eon_spi_flash_params
- },
- };
-
--struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_eon(struct spi_flash *flash, u8 *idcode)
- {
- const struct eon_spi_flash_params *params;
-- struct spi_flash *flash;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) {
-@@ -43,16 +42,10 @@ struct spi_flash *spi_flash_probe_eon(st
-
- if (i == ARRAY_SIZE(eon_spi_flash_table)) {
- debug("SF: Unsupported EON ID %02x\n", idcode[1]);
-- return NULL;
-+ return 0;
- }
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
--
-- flash->spi = spi;
-+ flash->priv = (void *)params;
- flash->name = params->name;
-
- flash->write = spi_flash_cmd_write_multi;
-@@ -63,5 +56,5 @@ struct spi_flash *spi_flash_probe_eon(st
- flash->size = 256 * 16
- * params->nr_sectors;
-
-- return flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/macronix.c
-+++ b/drivers/mtd/spi/macronix.c
-@@ -79,10 +79,9 @@ static const struct macronix_spi_flash_p
- },
- };
-
--struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_macronix(struct spi_flash *flash, u8 *idcode)
- {
- const struct macronix_spi_flash_params *params;
-- struct spi_flash *flash;
- unsigned int i;
- u16 id = idcode[2] | idcode[1] << 8;
-
-@@ -94,16 +93,10 @@ struct spi_flash *spi_flash_probe_macron
-
- if (i == ARRAY_SIZE(macronix_spi_flash_table)) {
- debug("SF: Unsupported Macronix ID %04x\n", id);
-- return NULL;
-+ return 0;
- }
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
--
-- flash->spi = spi;
-+ flash->priv = (void *)params;
- flash->name = params->name;
-
- flash->write = spi_flash_cmd_write_multi;
-@@ -116,5 +109,5 @@ struct spi_flash *spi_flash_probe_macron
- /* Clear BP# bits for read-only flash */
- spi_flash_cmd_write_status(flash, 0);
-
-- return flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/ramtron.c
-+++ b/drivers/mtd/spi/ramtron.c
-@@ -69,17 +69,6 @@ struct ramtron_spi_fram_params {
- const char *name; /* name for display and/or matching */
- };
-
--struct ramtron_spi_fram {
-- struct spi_flash flash;
-- const struct ramtron_spi_fram_params *params;
--};
--
--static inline struct ramtron_spi_fram *to_ramtron_spi_fram(struct spi_flash
-- *flash)
--{
-- return container_of(flash, struct ramtron_spi_fram, flash);
--}
--
- /*
- * table describing supported FRAM chips:
- * chips without RDID command must have the values 0xff for id1 and id2
-@@ -155,18 +144,18 @@ static const struct ramtron_spi_fram_par
- static int ramtron_common(struct spi_flash *flash,
- u32 offset, size_t len, void *buf, u8 command)
- {
-- struct ramtron_spi_fram *sn = to_ramtron_spi_fram(flash);
-+ const struct ramtron_spi_fram_params *params = flash->priv;
- u8 cmd[4];
- int cmd_len;
- int ret;
-
-- if (sn->params->addr_len == 3 && sn->params->merge_cmd == 0) {
-+ if (params->addr_len == 3 && params->merge_cmd == 0) {
- cmd[0] = command;
- cmd[1] = offset >> 16;
- cmd[2] = offset >> 8;
- cmd[3] = offset;
- cmd_len = 4;
-- } else if (sn->params->addr_len == 2 && sn->params->merge_cmd == 0) {
-+ } else if (params->addr_len == 2 && params->merge_cmd == 0) {
- cmd[0] = command;
- cmd[1] = offset >> 8;
- cmd[2] = offset;
-@@ -230,10 +219,9 @@ static int ramtron_erase(struct spi_flas
- * nore: we are called here with idcode pointing to the first non-0x7f byte
- * already!
- */
--struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode)
-+int spi_fram_probe_ramtron(struct spi_flash *flash, u8 *idcode)
- {
- const struct ramtron_spi_fram_params *params;
-- struct ramtron_spi_fram *sn;
- unsigned int i;
- #ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
- int ret;
-@@ -259,11 +247,11 @@ struct spi_flash *spi_fram_probe_ramtron
- */
- ret = spi_flash_cmd(spi, CMD_READ_STATUS, &sr, 1);
- if (ret)
-- return NULL;
-+ return 0;
-
- /* Bits 5,4,0 are fixed 0 for all devices */
- if ((sr & 0x31) != 0x00)
-- return NULL;
-+ return 0;
- /* now find the device */
- for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) {
- params = &ramtron_spi_fram_table[i];
-@@ -281,23 +269,16 @@ struct spi_flash *spi_fram_probe_ramtron
- /* arriving here means no method has found a device we can handle */
- debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n",
- idcode[0], idcode[1], idcode[2]);
-- return NULL;
-+ return 0;
-
- found:
-- sn = malloc(sizeof(*sn));
-- if (!sn) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
-+ flash->priv = (void *)params;
-+ flash->name = params->name;
-
-- sn->params = params;
-- sn->flash.spi = spi;
-- sn->flash.name = params->name;
--
-- sn->flash.write = ramtron_write;
-- sn->flash.read = ramtron_read;
-- sn->flash.erase = ramtron_erase;
-- sn->flash.size = params->size;
-+ flash->write = ramtron_write;
-+ flash->read = ramtron_read;
-+ flash->erase = ramtron_erase;
-+ flash->size = params->size;
-
-- return &sn->flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/spansion.c
-+++ b/drivers/mtd/spi/spansion.c
-@@ -105,10 +105,9 @@ static const struct spansion_spi_flash_p
- },
- };
-
--struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_spansion(struct spi_flash *flash, u8 *idcode)
- {
- const struct spansion_spi_flash_params *params;
-- struct spi_flash *flash;
- unsigned int i;
- unsigned short jedec, ext_jedec;
-
-@@ -125,16 +124,10 @@ struct spi_flash *spi_flash_probe_spansi
-
- if (i == ARRAY_SIZE(spansion_spi_flash_table)) {
- debug("SF: Unsupported SPANSION ID %04x %04x\n", jedec, ext_jedec);
-- return NULL;
-+ return 0;
- }
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
--
-- flash->spi = spi;
-+ flash->priv = (void *)params;
- flash->name = params->name;
-
- flash->write = spi_flash_cmd_write_multi;
-@@ -144,5 +137,5 @@ struct spi_flash *spi_flash_probe_spansi
- flash->sector_size = 256 * params->pages_per_sector;
- flash->size = flash->sector_size * params->nr_sectors;
-
-- return flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -296,7 +296,7 @@ int spi_flash_cmd_write_status(struct sp
- static struct {
- const u8 shift;
- const u8 idcode;
-- struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
-+ int (*probe) (struct spi_flash *flash, u8 *idcode);
- } flashes[] = {
- /* Keep it sorted by define name */
- #ifdef CONFIG_SPI_FLASH_ATMEL
-@@ -343,7 +343,7 @@ struct spi_flash *spi_flash_probe(unsign
- unsigned int max_hz, unsigned int spi_mode)
- {
- struct spi_slave *spi;
-- struct spi_flash *flash = NULL;
-+ struct spi_flash *flash;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
- #ifdef CONFIG_NEEDS_MANUAL_RELOC
-@@ -379,6 +379,15 @@ struct spi_flash *spi_flash_probe(unsign
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
- #endif
-
-+ flash = malloc(sizeof(*flash));
-+ if (!flash) {
-+ debug("SF: failed to alloc memory\n");
-+ goto err_malloc;
-+ }
-+
-+ memset(flash, 0, sizeof(*flash));
-+ flash->spi = spi;
-+
- /* count the number of continuation bytes */
- for (shift = 0, idp = idcode;
- shift < IDCODE_CONT_LEN && *idp == 0x7f;
-@@ -389,12 +398,12 @@ struct spi_flash *spi_flash_probe(unsign
- for (i = 0; i < ARRAY_SIZE(flashes); ++i)
- if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
- /* we have a match, call probe */
-- flash = flashes[i].probe(spi, idp);
-- if (flash)
-+ ret = flashes[i].probe(flash, idp);
-+ if (ret)
- break;
- }
-
-- if (!flash) {
-+ if (ret <= 0) {
- printf("SF: Unsupported manufacturer %02x\n", *idp);
- goto err_manufacturer_probe;
- }
-@@ -408,6 +417,8 @@ struct spi_flash *spi_flash_probe(unsign
- return flash;
-
- err_manufacturer_probe:
-+ free(flash);
-+err_malloc:
- err_read_id:
- spi_release_bus(spi);
- err_claim_bus:
---- a/drivers/mtd/spi/spi_flash_internal.h
-+++ b/drivers/mtd/spi/spi_flash_internal.h
-@@ -98,11 +98,11 @@ int spi_flash_cmd_wait_ready(struct spi_
- int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len);
-
- /* Manufacturer-specific probe functions */
--struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
--struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
-+int spi_flash_probe_spansion(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_atmel(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_eon(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_macronix(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_sst(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_stmicro(struct spi_flash *flash, u8 *idcode);
-+int spi_flash_probe_winbond(struct spi_flash *flash, u8 *idcode);
-+int spi_fram_probe_ramtron(struct spi_flash *flash, u8 *idcode);
---- a/drivers/mtd/spi/sst.c
-+++ b/drivers/mtd/spi/sst.c
-@@ -39,11 +39,6 @@ struct sst_spi_flash_params {
- const char *name;
- };
-
--struct sst_spi_flash {
-- struct spi_flash flash;
-- const struct sst_spi_flash_params *params;
--};
--
- static const struct sst_spi_flash_params sst_spi_flash_table[] = {
- {
- .idcode1 = 0x8d,
-@@ -185,11 +180,9 @@ sst_write_wp(struct spi_flash *flash, u3
- return ret;
- }
-
--struct spi_flash *
--spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_sst(struct spi_flash *flash, u8 *idcode)
- {
- const struct sst_spi_flash_params *params;
-- struct sst_spi_flash *stm;
- size_t i;
-
- for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
-@@ -200,31 +193,24 @@ spi_flash_probe_sst(struct spi_slave *sp
-
- if (i == ARRAY_SIZE(sst_spi_flash_table)) {
- debug("SF: Unsupported SST ID %02x\n", idcode[1]);
-- return NULL;
-- }
--
-- stm = malloc(sizeof(*stm));
-- if (!stm) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-+ return 0;
- }
-
-- stm->params = params;
-- stm->flash.spi = spi;
-- stm->flash.name = params->name;
-+ flash->priv = (void *)params;
-+ flash->name = params->name;
-
-- if (stm->params->flags & SST_FEAT_WP)
-- stm->flash.write = sst_write_wp;
-+ if (params->flags & SST_FEAT_WP)
-+ flash->write = sst_write_wp;
- else
-- stm->flash.write = spi_flash_cmd_write_multi;
-- stm->flash.erase = spi_flash_cmd_erase;
-- stm->flash.read = spi_flash_cmd_read_fast;
-- stm->flash.page_size = 256;
-- stm->flash.sector_size = 4096;
-- stm->flash.size = stm->flash.sector_size * params->nr_sectors;
-+ flash->write = spi_flash_cmd_write_multi;
-+ flash->erase = spi_flash_cmd_erase;
-+ flash->read = spi_flash_cmd_read_fast;
-+ flash->page_size = 256;
-+ flash->sector_size = 4096;
-+ flash->size = flash->sector_size * params->nr_sectors;
-
- /* Flash powers up read-only, so clear BP# bits */
-- spi_flash_cmd_write_status(&stm->flash, 0);
-+ spi_flash_cmd_write_status(flash, 0);
-
-- return &stm->flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/stmicro.c
-+++ b/drivers/mtd/spi/stmicro.c
-@@ -112,10 +112,10 @@ static const struct stmicro_spi_flash_pa
- },
- };
-
--struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
-+int spi_flash_probe_stmicro(struct spi_flash *flash, u8 * idcode)
- {
- const struct stmicro_spi_flash_params *params;
-- struct spi_flash *flash;
-+ struct spi_slave *spi = flash->spi;
- unsigned int i;
- u16 id;
-
-@@ -123,13 +123,13 @@ struct spi_flash *spi_flash_probe_stmicr
- i = spi_flash_cmd(spi, CMD_M25PXX_RES,
- idcode, 4);
- if (i)
-- return NULL;
-+ return 0;
- if ((idcode[3] & 0xf0) == 0x10) {
- idcode[0] = 0x20;
- idcode[1] = 0x20;
- idcode[2] = idcode[3] + 1;
- } else
-- return NULL;
-+ return 0;
- }
-
- id = ((idcode[1] << 8) | idcode[2]);
-@@ -143,16 +143,10 @@ struct spi_flash *spi_flash_probe_stmicr
-
- if (i == ARRAY_SIZE(stmicro_spi_flash_table)) {
- debug("SF: Unsupported STMicro ID %04x\n", id);
-- return NULL;
-+ return 0;
- }
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
--
-- flash->spi = spi;
-+ flash->priv = (void *)params;
- flash->name = params->name;
-
- flash->write = spi_flash_cmd_write_multi;
-@@ -162,5 +156,5 @@ struct spi_flash *spi_flash_probe_stmicr
- flash->sector_size = 256 * params->pages_per_sector;
- flash->size = flash->sector_size * params->nr_sectors;
-
-- return flash;
-+ return 1;
- }
---- a/drivers/mtd/spi/winbond.c
-+++ b/drivers/mtd/spi/winbond.c
-@@ -69,10 +69,9 @@ static const struct winbond_spi_flash_pa
- },
- };
-
--struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode)
-+int spi_flash_probe_winbond(struct spi_flash *flash, u8 *idcode)
- {
- const struct winbond_spi_flash_params *params;
-- struct spi_flash *flash;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(winbond_spi_flash_table); i++) {
-@@ -84,16 +83,10 @@ struct spi_flash *spi_flash_probe_winbon
- if (i == ARRAY_SIZE(winbond_spi_flash_table)) {
- debug("SF: Unsupported Winbond ID %02x%02x\n",
- idcode[1], idcode[2]);
-- return NULL;
-+ return 0;
- }
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: Failed to allocate memory\n");
-- return NULL;
-- }
--
-- flash->spi = spi;
-+ flash->priv = (void *)params;
- flash->name = params->name;
-
- flash->write = spi_flash_cmd_write_multi;
-@@ -103,5 +96,5 @@ struct spi_flash *spi_flash_probe_winbon
- flash->sector_size = 4096;
- flash->size = 4096 * 16 * params->nr_blocks;
-
-- return flash;
-+ return 1;
- }
---- a/include/spi_flash.h
-+++ b/include/spi_flash.h
-@@ -31,6 +31,7 @@ struct spi_flash {
- struct spi_slave *spi;
-
- const char *name;
-+ void *priv;
-
- /* Total flash size */
- u32 size;
diff --git a/package/boot/uboot-lantiq/patches/0003-sf-move-malloc-of-spi_flash-to-spi_flash_probe.patch b/package/boot/uboot-lantiq/patches/0003-sf-move-malloc-of-spi_flash-to-spi_flash_probe.patch
new file mode 100644
index 0000000..819eef8
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0003-sf-move-malloc-of-spi_flash-to-spi_flash_probe.patch
@@ -0,0 +1,115 @@
+From 36b7400465fe2339f1c78274b3fd258ade3a4c00 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sat, 12 Oct 2013 21:30:07 +0200
+Subject: sf: move malloc of spi_flash to spi_flash_probe()
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 04356f1..2bba10c 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -153,11 +153,10 @@ static const struct spi_flash_params spi_flash_params_table[] = {
+ */
+ };
+
+-static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
++static int spi_flash_validate_params(struct spi_flash *flash,
+ u8 *idcode)
+ {
+ const struct spi_flash_params *params;
+- struct spi_flash *flash;
+ int i;
+ u16 jedec = idcode[1] << 8 | idcode[2];
+ u16 ext_jedec = idcode[3] << 8 | idcode[4];
+@@ -179,20 +178,12 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ debug("SF: Unsupported flash IDs: ");
+ debug("manuf %02x, jedec %04x, ext_jedec %04x\n",
+ idcode[0], jedec, ext_jedec);
+- return NULL;
+- }
+-
+- flash = malloc(sizeof(*flash));
+- if (!flash) {
+- debug("SF: Failed to allocate spi_flash\n");
+- return NULL;
++ return -1;
+ }
+- memset(flash, '\0', sizeof(*flash));
+
+ /* Assign spi data */
+- flash->spi = spi;
+ flash->name = params->name;
+- flash->memory_map = spi->memory_map;
++ flash->memory_map = flash->spi->memory_map;
+
+ /* Assign spi_flash ops */
+ flash->write = spi_flash_cmd_write_ops;
+@@ -239,7 +230,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1)) {
+ debug("SF: fail to read bank addr register\n");
+- return NULL;
++ return -1;
+ }
+ flash->bank_curr = curr_bank;
+ } else {
+@@ -254,7 +245,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ spi_flash_cmd_write_status(flash, 0);
+ #endif
+
+- return flash;
++ return 0;
+ }
+
+ #ifdef CONFIG_OF_CONTROL
+@@ -289,15 +280,22 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+ {
+ struct spi_slave *spi;
+- struct spi_flash *flash = NULL;
++ struct spi_flash *flash;
+ u8 idcode[5];
+ int ret;
+
++ flash = malloc(sizeof(*flash));
++ if (!flash) {
++ debug("SF: Failed to allocate spi_flash\n");
++ return NULL;
++ }
++ memset(flash, 0, sizeof(*flash));
++
+ /* Setup spi_slave */
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ if (!spi) {
+ debug("SF: Failed to set up slave\n");
+- return NULL;
++ goto err_setup;
+ }
+
+ /* Claim spi bus */
+@@ -320,8 +318,9 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ #endif
+
+ /* Validate params from spi_flash_params table */
+- flash = spi_flash_validate_params(spi, idcode);
+- if (!flash)
++ flash->spi = spi;
++ ret = spi_flash_validate_params(flash, idcode);
++ if (ret)
+ goto err_read_id;
+
+ #ifdef CONFIG_OF_CONTROL
+@@ -355,6 +354,9 @@ err_read_id:
+ spi_release_bus(spi);
+ err_claim_bus:
+ spi_free_slave(spi);
++err_setup:
++ free(flash);
++
+ return NULL;
+ }
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0004-sf-add-malloc-free-probe-functions-dedicated-for-SPL.patch b/package/boot/uboot-lantiq/patches/0004-sf-add-malloc-free-probe-functions-dedicated-for-SPL.patch
deleted file mode 100644
index 7a1ef3b..0000000
--- a/package/boot/uboot-lantiq/patches/0004-sf-add-malloc-free-probe-functions-dedicated-for-SPL.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From f9ab44c271fbd82a5702b6ba067fa90e33a30089 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 15:29:27 +0100
-Subject: sf: add malloc-free probe functions dedicated for SPL
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -339,11 +339,11 @@ static struct {
- DECLARE_GLOBAL_DATA_PTR;
- #endif
-
--struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
-- unsigned int max_hz, unsigned int spi_mode)
-+int spi_flash_probe_spl(struct spi_flash *flash, unsigned int bus,
-+ unsigned int cs, unsigned int max_hz,
-+ unsigned int spi_mode)
- {
- struct spi_slave *spi;
-- struct spi_flash *flash;
- int ret, i, shift;
- u8 idcode[IDCODE_LEN], *idp;
- #ifdef CONFIG_NEEDS_MANUAL_RELOC
-@@ -359,8 +359,8 @@ struct spi_flash *spi_flash_probe(unsign
-
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
- if (!spi) {
-- printf("SF: Failed to set up slave\n");
-- return NULL;
-+ debug("SF: Failed to set up slave\n");
-+ return -1;
- }
-
- ret = spi_claim_bus(spi);
-@@ -379,13 +379,6 @@ struct spi_flash *spi_flash_probe(unsign
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
- #endif
-
-- flash = malloc(sizeof(*flash));
-- if (!flash) {
-- debug("SF: failed to alloc memory\n");
-- goto err_malloc;
-- }
--
-- memset(flash, 0, sizeof(*flash));
- flash->spi = spi;
-
- /* count the number of continuation bytes */
-@@ -404,30 +397,58 @@ struct spi_flash *spi_flash_probe(unsign
- }
-
- if (ret <= 0) {
-- printf("SF: Unsupported manufacturer %02x\n", *idp);
-+ debug("SF: Unsupported manufacturer %02x\n", *idp);
- goto err_manufacturer_probe;
- }
-
-- printf("SF: Detected %s with page size ", flash->name);
-- print_size(flash->sector_size, ", total ");
-- print_size(flash->size, "\n");
--
- spi_release_bus(spi);
-
-- return flash;
-+ return 0;
-
- err_manufacturer_probe:
-- free(flash);
--err_malloc:
- err_read_id:
- spi_release_bus(spi);
- err_claim_bus:
- spi_free_slave(spi);
-+
-+ return ret;
-+}
-+
-+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
-+ unsigned int max_hz, unsigned int spi_mode)
-+{
-+ struct spi_flash *flash;
-+ int ret;
-+
-+ flash = malloc(sizeof(*flash));
-+ if (!flash) {
-+ debug("SF: Failed to malloc spi_flash\n");
-+ return NULL;
-+ }
-+ memset(flash, 0, sizeof(*flash));
-+
-+ ret = spi_flash_probe_spl(flash, bus, cs, max_hz, spi_mode);
-+ if (ret)
-+ goto err_probe;
-+
-+ printf("SF: %s, page size ", flash->name);
-+ print_size(flash->sector_size, ", total ");
-+ print_size(flash->size, "\n");
-+
-+ return flash;
-+
-+err_probe:
-+ free(flash);
- return NULL;
- }
-
--void spi_flash_free(struct spi_flash *flash)
-+void spi_flash_free_spl(struct spi_flash *flash)
- {
- spi_free_slave(flash->spi);
-+}
-+
-+void spi_flash_free(struct spi_flash *flash)
-+{
-+ spi_flash_free_spl(flash);
- free(flash);
- }
---- a/include/spi_flash.h
-+++ b/include/spi_flash.h
-@@ -52,6 +52,11 @@ struct spi_flash *spi_flash_probe(unsign
- unsigned int max_hz, unsigned int spi_mode);
- void spi_flash_free(struct spi_flash *flash);
-
-+int spi_flash_probe_spl(struct spi_flash *flash, unsigned int bus,
-+ unsigned int cs, unsigned int max_hz,
-+ unsigned int spi_mode);
-+void spi_flash_free_spl(struct spi_flash *flash);
-+
- static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
- size_t len, void *buf)
- {
diff --git a/package/boot/uboot-lantiq/patches/0004-sf-add-slim-probe-funtions-for-SPL.patch b/package/boot/uboot-lantiq/patches/0004-sf-add-slim-probe-funtions-for-SPL.patch
new file mode 100644
index 0000000..d1768af
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0004-sf-add-slim-probe-funtions-for-SPL.patch
@@ -0,0 +1,87 @@
+From da11da943487e2f724f25d409bcaa1f099637c0b Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 13 Oct 2013 14:56:45 +0200
+Subject: sf: add slim probe funtions for SPL
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 2bba10c..380aa09 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -365,3 +365,58 @@ void spi_flash_free(struct spi_flash *flash)
+ spi_free_slave(flash->spi);
+ free(flash);
+ }
++
++#ifdef CONFIG_SPI_SPL_SIMPLE
++int spl_spi_flash_probe(struct spi_flash *flash)
++{
++ struct spi_slave *spi;
++ u8 idcode[5];
++ int ret;
++
++ /* Setup spi_slave */
++ spi = spi_setup_slave(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
++ CONFIG_SPL_SPI_MAX_HZ, CONFIG_SPL_SPI_MODE);
++ if (!spi) {
++ debug("SF: Failed to set up slave\n");
++ return -1;
++ }
++
++ /* Claim spi bus */
++ ret = spi_claim_bus(spi);
++ if (ret) {
++ debug("SF: Failed to claim SPI bus: %d\n", ret);
++ goto err_claim_bus;
++ }
++
++ /* Read the ID codes */
++ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
++ if (ret) {
++ debug("SF: Failed to get idcodes\n");
++ goto err_read_id;
++ }
++
++ /* Validate params from spi_flash_params table */
++ flash->spi = spi;
++ ret = spi_flash_validate_params(flash, idcode);
++ if (ret)
++ goto err_read_id;
++
++ /* Release spi bus */
++ spi_release_bus(spi);
++
++ return 0;
++
++err_read_id:
++ spi_release_bus(spi);
++err_claim_bus:
++ spi_free_slave(spi);
++ flash->spi = NULL;
++
++ return ret;
++}
++
++void spl_spi_flash_free(struct spi_flash *flash)
++{
++ spi_free_slave(flash->spi);
++}
++#endif
+diff --git a/include/spi_flash.h b/include/spi_flash.h
+index 25ca8f1..411dd1b 100644
+--- a/include/spi_flash.h
++++ b/include/spi_flash.h
+@@ -69,6 +69,9 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode);
+ void spi_flash_free(struct spi_flash *flash);
+
++int spl_spi_flash_probe(struct spi_flash *flash);
++void spl_spi_flash_free(struct spi_flash *flash);
++
+ static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
+ size_t len, void *buf)
+ {
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0005-sf-factor-out-the-flash-address-calculation.patch b/package/boot/uboot-lantiq/patches/0005-sf-factor-out-the-flash-address-calculation.patch
deleted file mode 100644
index 356db59..0000000
--- a/package/boot/uboot-lantiq/patches/0005-sf-factor-out-the-flash-address-calculation.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From acb2721e1cd2e7488a7b08a4ed590177369a1689 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 19:10:40 +0100
-Subject: sf: factor out the flash address calculation
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -15,12 +15,22 @@
-
- #include "spi_flash_internal.h"
-
--static void spi_flash_addr(u32 addr, u8 *cmd)
-+static void spi_flash_addr(struct spi_flash *flash, u32 addr, u8 *cmd, u8 *cmd_len)
- {
- /* cmd[0] is actual command */
- cmd[1] = addr >> 16;
- cmd[2] = addr >> 8;
- cmd[3] = addr >> 0;
-+ *cmd_len = 4;
-+}
-+
-+static void spi_flash_page_addr(struct spi_flash *flash, u32 page_addr, u32 byte_addr, u8 *cmd, u8 *cmd_len)
-+{
-+ /* cmd[0] is actual command */
-+ cmd[1] = page_addr >> 8;
-+ cmd[2] = page_addr >> 0;
-+ cmd[3] = byte_addr;
-+ *cmd_len = 4;
- }
-
- static int spi_flash_read_write(struct spi_slave *spi,
-@@ -71,7 +81,7 @@ int spi_flash_cmd_write_multi(struct spi
- unsigned long page_addr, byte_addr, page_size;
- size_t chunk_len, actual;
- int ret;
-- u8 cmd[4];
-+ u8 cmd[4], cmd_len;
-
- page_size = flash->page_size;
- page_addr = offset / page_size;
-@@ -87,9 +97,7 @@ int spi_flash_cmd_write_multi(struct spi
- for (actual = 0; actual < len; actual += chunk_len) {
- chunk_len = min(len - actual, page_size - byte_addr);
-
-- cmd[1] = page_addr >> 8;
-- cmd[2] = page_addr;
-- cmd[3] = byte_addr;
-+ spi_flash_page_addr(flash, page_addr, byte_addr, cmd, &cmd_len);
-
- debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-@@ -100,7 +108,7 @@ int spi_flash_cmd_write_multi(struct spi
- break;
- }
-
-- ret = spi_flash_cmd_write(flash->spi, cmd, 4,
-+ ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
- buf + actual, chunk_len);
- if (ret < 0) {
- debug("SF: write failed\n");
-@@ -138,13 +146,13 @@ int spi_flash_read_common(struct spi_fla
- int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
- size_t len, void *data)
- {
-- u8 cmd[5];
-+ u8 cmd[5], cmd_len;
-
- cmd[0] = CMD_READ_ARRAY_FAST;
-- spi_flash_addr(offset, cmd);
-- cmd[4] = 0x00;
-+ spi_flash_addr(flash, offset, cmd, &cmd_len);
-+ cmd[cmd_len] = 0x00;
-
-- return spi_flash_read_common(flash, cmd, sizeof(cmd), data, len);
-+ return spi_flash_read_common(flash, cmd, cmd_len + 1, data, len);
- }
-
- int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-@@ -194,7 +202,7 @@ int spi_flash_cmd_erase(struct spi_flash
- {
- u32 start, end, erase_size;
- int ret;
-- u8 cmd[4];
-+ u8 cmd[4], cmd_len;
-
- erase_size = flash->sector_size;
- if (offset % erase_size || len % erase_size) {
-@@ -216,7 +224,7 @@ int spi_flash_cmd_erase(struct spi_flash
- end = start + len;
-
- while (offset < end) {
-- spi_flash_addr(offset, cmd);
-+ spi_flash_addr(flash, offset, cmd, &cmd_len);
- offset += erase_size;
-
- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-@@ -226,7 +234,7 @@ int spi_flash_cmd_erase(struct spi_flash
- if (ret)
- goto out;
-
-- ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0);
-+ ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, NULL, 0);
- if (ret)
- goto out;
-
diff --git a/package/boot/uboot-lantiq/patches/0005-sf-make-calculatiom-of-address-bytes-completely-conf.patch b/package/boot/uboot-lantiq/patches/0005-sf-make-calculatiom-of-address-bytes-completely-conf.patch
new file mode 100644
index 0000000..f17aa32
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0005-sf-make-calculatiom-of-address-bytes-completely-conf.patch
@@ -0,0 +1,143 @@
+From 6fb5f86b094756d94de8abe7425e3d290ff22dd2 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 13 Oct 2013 15:09:28 +0200
+Subject: sf: make calculatiom of address bytes completely configurable
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
+index d34747b..207adf5 100644
+--- a/drivers/mtd/spi/sf_ops.c
++++ b/drivers/mtd/spi/sf_ops.c
+@@ -15,12 +15,17 @@
+
+ #include "sf_internal.h"
+
+-static void spi_flash_addr(u32 addr, u8 *cmd)
++static void spi_flash_addr(const struct spi_flash *flash, u32 addr, u8 *cmd)
+ {
+ /* cmd[0] is actual command */
+- cmd[1] = addr >> 16;
+- cmd[2] = addr >> 8;
+- cmd[3] = addr >> 0;
++ cmd[1] = addr >> (flash->addr_width * 8 - 8);
++ cmd[2] = addr >> (flash->addr_width * 8 - 16);
++ cmd[3] = addr >> (flash->addr_width * 8 - 24);
++}
++
++static int spi_flash_cmdsz(const struct spi_flash *flash)
++{
++ return 1 + flash->addr_width;
+ }
+
+ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+@@ -158,7 +163,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ {
+ u32 erase_size;
+- u8 cmd[4];
++ u8 cmd[4], cmd_len;
+ int ret = -1;
+
+ erase_size = flash->erase_size;
+@@ -180,12 +185,13 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ if (ret < 0)
+ goto done;
+ #endif
+- spi_flash_addr(offset, cmd);
++ spi_flash_addr(flash, offset, cmd);
++ cmd_len = spi_flash_cmdsz(flash);
+
+ debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+ cmd[2], cmd[3], offset);
+
+- ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
++ ret = spi_flash_write_common(flash, cmd, cmd_len, NULL, 0);
+ if (ret < 0) {
+ debug("SF: erase failed\n");
+ goto done;
+@@ -206,7 +212,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ {
+ unsigned long byte_addr, page_size;
+ size_t chunk_len, actual;
+- u8 cmd[4];
++ u8 cmd[4], cmd_len;
+ int ret = -1;
+
+ ret = spi_claim_bus(flash->spi);
+@@ -230,12 +236,13 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ if (flash->spi->max_write_size)
+ chunk_len = min(chunk_len, flash->spi->max_write_size);
+
+- spi_flash_addr(offset, cmd);
++ spi_flash_addr(flash, offset, cmd);
++ cmd_len = spi_flash_cmdsz(flash);
+
+ debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
+ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+- ret = spi_flash_write_common(flash, cmd, sizeof(cmd),
++ ret = spi_flash_write_common(flash, cmd, cmd_len,
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: write failed\n");
+@@ -269,7 +276,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ size_t len, void *data)
+ {
+- u8 cmd[5], bank_sel = 0;
++ u8 cmd[5], cmd_len, bank_sel = 0;
+ u32 remain_len, read_len;
+ int ret = -1;
+
+@@ -288,7 +295,6 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ }
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+- cmd[4] = 0x00;
+
+ while (len) {
+ #ifdef CONFIG_SPI_FLASH_BAR
+@@ -306,9 +312,11 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ else
+ read_len = remain_len;
+
+- spi_flash_addr(offset, cmd);
++ spi_flash_addr(flash, offset, cmd);
++ cmd_len = spi_flash_cmdsz(flash);
++ cmd[cmd_len] = 0x00;
+
+- ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
++ ret = spi_flash_read_common(flash, cmd, cmd_len + 1,
+ data, read_len);
+ if (ret < 0) {
+ debug("SF: read failed\n");
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 380aa09..84289db 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -218,6 +218,9 @@ static int spi_flash_validate_params(struct spi_flash *flash,
+ flash->poll_cmd = CMD_FLAG_STATUS;
+ #endif
+
++ /* Configure default 3-byte addressing */
++ flash->addr_width = 3;
++
+ /* Configure the BAR - discover bank cmds and read current bank */
+ #ifdef CONFIG_SPI_FLASH_BAR
+ u8 curr_bank = 0;
+diff --git a/include/spi_flash.h b/include/spi_flash.h
+index 411dd1b..cc9398b 100644
+--- a/include/spi_flash.h
++++ b/include/spi_flash.h
+@@ -57,6 +57,7 @@ struct spi_flash {
+ #endif
+ u8 poll_cmd;
+ u8 erase_cmd;
++ u8 addr_width;
+
+ void *memory_map;
+ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0006-sf-add-generic-support-for-4-byte-address-mode.patch b/package/boot/uboot-lantiq/patches/0006-sf-add-generic-support-for-4-byte-address-mode.patch
deleted file mode 100644
index 1623b15..0000000
--- a/package/boot/uboot-lantiq/patches/0006-sf-add-generic-support-for-4-byte-address-mode.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From fb9ed0ef6f0ba6b6535c64dcfcf45c161723e56f Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 19:31:38 +0100
-Subject: sf: add generic support for 4-byte address mode
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -18,19 +18,35 @@
- static void spi_flash_addr(struct spi_flash *flash, u32 addr, u8 *cmd, u8 *cmd_len)
- {
- /* cmd[0] is actual command */
-- cmd[1] = addr >> 16;
-- cmd[2] = addr >> 8;
-- cmd[3] = addr >> 0;
-- *cmd_len = 4;
-+ if (spi_flash_use_4byte_mode(flash)) {
-+ cmd[1] = addr >> 24;
-+ cmd[2] = addr >> 16;
-+ cmd[3] = addr >> 8;
-+ cmd[4] = addr >> 0;
-+ *cmd_len = 5;
-+ } else {
-+ cmd[1] = addr >> 16;
-+ cmd[2] = addr >> 8;
-+ cmd[3] = addr >> 0;
-+ *cmd_len = 4;
-+ }
- }
-
- static void spi_flash_page_addr(struct spi_flash *flash, u32 page_addr, u32 byte_addr, u8 *cmd, u8 *cmd_len)
- {
- /* cmd[0] is actual command */
-- cmd[1] = page_addr >> 8;
-- cmd[2] = page_addr >> 0;
-- cmd[3] = byte_addr;
-- *cmd_len = 4;
-+ if (spi_flash_use_4byte_mode(flash)) {
-+ cmd[1] = page_addr >> 16;
-+ cmd[2] = page_addr >> 8;
-+ cmd[3] = page_addr >> 0;
-+ cmd[4] = byte_addr;
-+ *cmd_len = 5;
-+ } else {
-+ cmd[1] = page_addr >> 8;
-+ cmd[2] = page_addr >> 0;
-+ cmd[3] = byte_addr;
-+ *cmd_len = 4;
-+ }
- }
-
- static int spi_flash_read_write(struct spi_slave *spi,
-@@ -81,7 +97,7 @@ int spi_flash_cmd_write_multi(struct spi
- unsigned long page_addr, byte_addr, page_size;
- size_t chunk_len, actual;
- int ret;
-- u8 cmd[4], cmd_len;
-+ u8 cmd[5], cmd_len;
-
- page_size = flash->page_size;
- page_addr = offset / page_size;
-@@ -99,8 +115,8 @@ int spi_flash_cmd_write_multi(struct spi
-
- spi_flash_page_addr(flash, page_addr, byte_addr, cmd, &cmd_len);
-
-- debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
-- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
-+ debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x%02x } chunk_len = %zu\n",
-+ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], chunk_len);
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret < 0) {
-@@ -146,7 +162,7 @@ int spi_flash_read_common(struct spi_fla
- int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
- size_t len, void *data)
- {
-- u8 cmd[5], cmd_len;
-+ u8 cmd[6], cmd_len;
-
- cmd[0] = CMD_READ_ARRAY_FAST;
- spi_flash_addr(flash, offset, cmd, &cmd_len);
-@@ -202,7 +218,7 @@ int spi_flash_cmd_erase(struct spi_flash
- {
- u32 start, end, erase_size;
- int ret;
-- u8 cmd[4], cmd_len;
-+ u8 cmd[5], cmd_len;
-
- erase_size = flash->sector_size;
- if (offset % erase_size || len % erase_size) {
-@@ -227,8 +243,8 @@ int spi_flash_cmd_erase(struct spi_flash
- spi_flash_addr(flash, offset, cmd, &cmd_len);
- offset += erase_size;
-
-- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-- cmd[2], cmd[3], offset);
-+ debug("SF: erase %2x %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
-+ cmd[2], cmd[3], cmd[4], offset);
-
- ret = spi_flash_cmd_write_enable(flash);
- if (ret)
-@@ -409,6 +425,12 @@ int spi_flash_probe_spl(struct spi_flash
- goto err_manufacturer_probe;
- }
-
-+ ret = spi_flash_set_4byte_mode(flash);
-+ if (ret) {
-+ debug("SF: Failed to enable 4 byte mode: %d\n", ret);
-+ goto err_manufacturer_probe;
-+ }
-+
- spi_release_bus(spi);
-
- return 0;
---- a/drivers/mtd/spi/spi_flash_internal.h
-+++ b/drivers/mtd/spi/spi_flash_internal.h
-@@ -97,6 +97,31 @@ int spi_flash_cmd_wait_ready(struct spi_
- /* Erase sectors. */
- int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len);
-
-+#ifdef CONFIG_SPI_FLASH_4BYTE_MODE
-+static inline int spi_flash_use_4byte_mode(struct spi_flash *flash)
-+{
-+ return NULL != flash->set_4byte_mode;
-+}
-+
-+static inline int spi_flash_set_4byte_mode(struct spi_flash *flash)
-+{
-+ if (spi_flash_use_4byte_mode(flash))
-+ return flash->set_4byte_mode(flash);
-+
-+ return 0;
-+}
-+#else
-+static inline int spi_flash_use_4byte_mode(struct spi_flash *flash)
-+{
-+ return 0;
-+}
-+
-+static inline int spi_flash_set_4byte_mode(struct spi_flash *flash)
-+{
-+ return 0;
-+}
-+#endif
-+
- /* Manufacturer-specific probe functions */
- int spi_flash_probe_spansion(struct spi_flash *flash, u8 *idcode);
- int spi_flash_probe_atmel(struct spi_flash *flash, u8 *idcode);
---- a/include/spi_flash.h
-+++ b/include/spi_flash.h
-@@ -46,6 +46,9 @@ struct spi_flash {
- size_t len, const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset,
- size_t len);
-+#ifdef CONFIG_SPI_FLASH_4BYTE_MODE
-+ int (*set_4byte_mode)(struct spi_flash *flash);
-+#endif
- };
-
- struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
diff --git a/package/boot/uboot-lantiq/patches/0006-sf-add-support-for-4-byte-addressing.patch b/package/boot/uboot-lantiq/patches/0006-sf-add-support-for-4-byte-addressing.patch
new file mode 100644
index 0000000..f386eee
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0006-sf-add-support-for-4-byte-addressing.patch
@@ -0,0 +1,169 @@
+From 3af3addee645bd81537be1ddee49969f8dfc64ee Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 13 Oct 2013 15:24:56 +0200
+Subject: sf: add support for 4-byte addressing
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
+index 732ddf8..c5e8eb1 100644
+--- a/drivers/mtd/spi/sf_internal.h
++++ b/drivers/mtd/spi/sf_internal.h
+@@ -38,12 +38,14 @@
+ #define CMD_READ_ID 0x9f
+
+ /* Bank addr access commands */
+-#ifdef CONFIG_SPI_FLASH_BAR
+-# define CMD_BANKADDR_BRWR 0x17
+-# define CMD_BANKADDR_BRRD 0x16
+-# define CMD_EXTNADDR_WREAR 0xC5
+-# define CMD_EXTNADDR_RDEAR 0xC8
+-#endif
++#define CMD_BANKADDR_BRWR 0x17
++#define CMD_BANKADDR_BRRD 0x16
++#define CMD_EXTNADDR_WREAR 0xC5
++#define CMD_EXTNADDR_RDEAR 0xC8
++
++/* Macronix style 4-byte addressing */
++#define CMD_EN4B 0xb7
++#define CMD_EX4B 0xe9
+
+ /* Common status */
+ #define STATUS_WIP 0x01
+diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
+index 207adf5..1d072f8 100644
+--- a/drivers/mtd/spi/sf_ops.c
++++ b/drivers/mtd/spi/sf_ops.c
+@@ -21,6 +21,7 @@ static void spi_flash_addr(const struct spi_flash *flash, u32 addr, u8 *cmd)
+ cmd[1] = addr >> (flash->addr_width * 8 - 8);
+ cmd[2] = addr >> (flash->addr_width * 8 - 16);
+ cmd[3] = addr >> (flash->addr_width * 8 - 24);
++ cmd[4] = addr >> (flash->addr_width * 8 - 32);
+ }
+
+ static int spi_flash_cmdsz(const struct spi_flash *flash)
+@@ -163,7 +164,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
+ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ {
+ u32 erase_size;
+- u8 cmd[4], cmd_len;
++ u8 cmd[5], cmd_len;
+ int ret = -1;
+
+ erase_size = flash->erase_size;
+@@ -188,8 +189,8 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+ spi_flash_addr(flash, offset, cmd);
+ cmd_len = spi_flash_cmdsz(flash);
+
+- debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
+- cmd[2], cmd[3], offset);
++ debug("SF: erase %2x %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
++ cmd[2], cmd[3], cmd[4], offset);
+
+ ret = spi_flash_write_common(flash, cmd, cmd_len, NULL, 0);
+ if (ret < 0) {
+@@ -212,7 +213,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ {
+ unsigned long byte_addr, page_size;
+ size_t chunk_len, actual;
+- u8 cmd[4], cmd_len;
++ u8 cmd[5], cmd_len;
+ int ret = -1;
+
+ ret = spi_claim_bus(flash->spi);
+@@ -239,8 +240,8 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+ spi_flash_addr(flash, offset, cmd);
+ cmd_len = spi_flash_cmdsz(flash);
+
+- debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
+- buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
++ debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x%02x } chunk_len = %zu\n",
++ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], chunk_len);
+
+ ret = spi_flash_write_common(flash, cmd, cmd_len,
+ buf + actual, chunk_len);
+@@ -276,9 +277,13 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
+ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ size_t len, void *data)
+ {
+- u8 cmd[5], cmd_len, bank_sel = 0;
+- u32 remain_len, read_len;
++ u8 cmd[6], cmd_len;
++ u32 read_len;
+ int ret = -1;
++#ifdef CONFIG_SPI_FLASH_BAR
++ u8 bank_sel = 0;
++ u32 remain_len;
++#endif
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+@@ -305,12 +310,15 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+ debug("SF: fail to set bank%d\n", bank_sel);
+ goto done;
+ }
+-#endif
++
+ remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1)) - offset;
+ if (len < remain_len)
+ read_len = len;
+ else
+ read_len = remain_len;
++#else
++ read_len = len;
++#endif
+
+ spi_flash_addr(flash, offset, cmd);
+ cmd_len = spi_flash_cmdsz(flash);
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 84289db..ac44287 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -153,6 +153,25 @@ static const struct spi_flash_params spi_flash_params_table[] = {
+ */
+ };
+
++int spi_flash_4byte_set(struct spi_flash *flash, u8 idcode0, int enable)
++{
++ u8 cmd, bankaddr;
++
++ switch (idcode0) {
++ case 0xc2:
++ case 0xef:
++ case 0x1c:
++ /* Macronix style */
++ cmd = enable ? CMD_EN4B : CMD_EX4B;
++ return spi_flash_cmd(flash->spi, cmd, NULL, 0);
++ default:
++ /* Spansion style */
++ cmd = CMD_BANKADDR_BRWR;
++ bankaddr = enable << 7;
++ return spi_flash_cmd_write(flash->spi, &cmd, 1, &bankaddr, 1);
++ }
++}
++
+ static int spi_flash_validate_params(struct spi_flash *flash,
+ u8 *idcode)
+ {
+@@ -218,8 +237,18 @@ static int spi_flash_validate_params(struct spi_flash *flash,
+ flash->poll_cmd = CMD_FLAG_STATUS;
+ #endif
+
++#ifndef CONFIG_SPI_FLASH_BAR
++ /* enable 4-byte addressing if the device exceeds 16MiB */
++ if (flash->size > SPI_FLASH_16MB_BOUN) {
++ flash->addr_width = 4;
++ spi_flash_4byte_set(flash, idcode[0], 1);
++ } else {
++ flash->addr_width = 3;
++ }
++#else
+ /* Configure default 3-byte addressing */
+ flash->addr_width = 3;
++#endif
+
+ /* Configure the BAR - discover bank cmds and read current bank */
+ #ifdef CONFIG_SPI_FLASH_BAR
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0007-sf-add-support-for-EN25QH256.patch b/package/boot/uboot-lantiq/patches/0007-sf-add-support-for-EN25QH256.patch
new file mode 100644
index 0000000..561bd7b
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0007-sf-add-support-for-EN25QH256.patch
@@ -0,0 +1,22 @@
+From d5aa0d4117a439803a3d074d2745372036d2a1eb Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 13 Oct 2013 15:35:34 +0200
+Subject: sf: add support for EN25QH256
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index ac44287..7e87021 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -53,6 +53,7 @@ static const struct spi_flash_params spi_flash_params_table[] = {
+ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K},
+ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0},
+ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0},
++ {"EN25QH256", 0x1c7019, 0x0, 64 * 1024, 512, 0},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
+ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K},
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0007-sf-eon-use-16-bit-ID-for-comparison.patch b/package/boot/uboot-lantiq/patches/0007-sf-eon-use-16-bit-ID-for-comparison.patch
deleted file mode 100644
index 6836674..0000000
--- a/package/boot/uboot-lantiq/patches/0007-sf-eon-use-16-bit-ID-for-comparison.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From d32f45357f0475a2f810752eeb9412fe692e1c0a Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 14:09:21 +0100
-Subject: sf: eon: use 16 bit ID for comparison
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/eon.c
-+++ b/drivers/mtd/spi/eon.c
-@@ -11,19 +11,19 @@
- #include "spi_flash_internal.h"
-
- struct eon_spi_flash_params {
-- u8 idcode1;
-+ u16 idcode;
- u16 nr_sectors;
- const char *name;
- };
-
- static const struct eon_spi_flash_params eon_spi_flash_table[] = {
- {
-- .idcode1 = 0x16,
-+ .idcode = 0x3016,
- .nr_sectors = 1024,
- .name = "EN25Q32B",
- },
- {
-- .idcode1 = 0x18,
-+ .idcode = 0x3018,
- .nr_sectors = 4096,
- .name = "EN25Q128",
- },
-@@ -33,10 +33,11 @@ int spi_flash_probe_eon(struct spi_flash
- {
- const struct eon_spi_flash_params *params;
- unsigned int i;
-+ u16 id = idcode[2] | idcode[1] << 8;
-
- for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) {
- params = &eon_spi_flash_table[i];
-- if (params->idcode1 == idcode[2])
-+ if (params->idcode == id)
- break;
- }
-
diff --git a/package/boot/uboot-lantiq/patches/0008-sf-eon-add-support-for-4-byte-address-mode.patch b/package/boot/uboot-lantiq/patches/0008-sf-eon-add-support-for-4-byte-address-mode.patch
deleted file mode 100644
index c037a86..0000000
--- a/package/boot/uboot-lantiq/patches/0008-sf-eon-add-support-for-4-byte-address-mode.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 37254e3284f61ea495f73a78b7c8efae983781e2 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 14:10:07 +0100
-Subject: sf: eon: add support for 4-byte address mode
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/eon.c
-+++ b/drivers/mtd/spi/eon.c
-@@ -10,6 +10,8 @@
-
- #include "spi_flash_internal.h"
-
-+#define EN25XX_EN4B 0xb7 /* Enter 4-byte mode */
-+
- struct eon_spi_flash_params {
- u16 idcode;
- u16 nr_sectors;
-@@ -29,6 +31,13 @@ static const struct eon_spi_flash_params
- },
- };
-
-+static __maybe_unused int eon_set_4byte_mode(struct spi_flash *flash)
-+{
-+ struct spi_slave *spi = flash->spi;
-+
-+ return spi_flash_cmd(spi, EN25XX_EN4B, NULL, 0);
-+}
-+
- int spi_flash_probe_eon(struct spi_flash *flash, u8 *idcode)
- {
- const struct eon_spi_flash_params *params;
-@@ -57,5 +66,10 @@ int spi_flash_probe_eon(struct spi_flash
- flash->size = 256 * 16
- * params->nr_sectors;
-
-+#ifdef CONFIG_SPI_FLASH_4BYTE_MODE
-+ if (flash->size > (1 << 24))
-+ flash->set_4byte_mode = eon_set_4byte_mode;
-+#endif
-+
- return 1;
- }
diff --git a/package/boot/uboot-lantiq/patches/0008-sf-fix-sector-layout-of-S25FL256S_256K-and-S25FL512S.patch b/package/boot/uboot-lantiq/patches/0008-sf-fix-sector-layout-of-S25FL256S_256K-and-S25FL512S.patch
new file mode 100644
index 0000000..f313044
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0008-sf-fix-sector-layout-of-S25FL256S_256K-and-S25FL512S.patch
@@ -0,0 +1,26 @@
+From 5a6d8045190c887c7f65e65fb1bfc8854774c458 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 13 Oct 2013 15:40:07 +0200
+Subject: sf: fix sector layout of S25FL256S_256K and S25FL512S_256K
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
+index 7e87021..1fc224e 100644
+--- a/drivers/mtd/spi/sf_probe.c
++++ b/drivers/mtd/spi/sf_probe.c
+@@ -80,9 +80,9 @@ static const struct spi_flash_params spi_flash_params_table[] = {
+ {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, 0},
+ {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, 0},
+ {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, 0},
+- {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, 0},
++ {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, 0},
+ {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, 0},
+- {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, 0},
++ {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, 0},
+ {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, 0},
+ #endif
+ #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0019-net-switchlib-add-framework-for-ethernet-switch-driv.patch b/package/boot/uboot-lantiq/patches/0009-net-switchlib-add-framework-for-ethernet-switch-driv.patch
index a215d1a..e25df31 100644
--- a/package/boot/uboot-lantiq/patches/0019-net-switchlib-add-framework-for-ethernet-switch-driv.patch
+++ b/package/boot/uboot-lantiq/patches/0009-net-switchlib-add-framework-for-ethernet-switch-driv.patch
@@ -1,4 +1,4 @@
-From d8b1597130d228bc7e2bafd0c8d097529018c833 Mon Sep 17 00:00:00 2001
+From 0dff8c753c8929a478357abb38db0d1c1a60ec94 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Wed, 29 Aug 2012 22:08:15 +0200
Subject: net: switchlib: add framework for ethernet switch drivers
@@ -10,9 +10,11 @@ setup code for switch devices across different boards.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
+diff --git a/Makefile b/Makefile
+index dc04179..6ee9a3c 100644
--- a/Makefile
+++ b/Makefile
-@@ -291,6 +291,7 @@ LIBS-y += drivers/mtd/ubi/libubi.o
+@@ -280,6 +280,7 @@ LIBS-y += drivers/mtd/ubi/libubi.o
LIBS-y += drivers/mtd/spi/libspi_flash.o
LIBS-y += drivers/net/libnet.o
LIBS-y += drivers/net/phy/libphy.o
@@ -20,15 +22,17 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
LIBS-y += drivers/pci/libpci.o
LIBS-y += drivers/pcmcia/libpcmcia.o
LIBS-y += drivers/power/libpower.o \
+diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile
+new file mode 100644
+index 0000000..31719d8
--- /dev/null
+++ b/drivers/net/switch/Makefile
-@@ -0,0 +1,31 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,30 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -54,14 +58,16 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c
+new file mode 100644
+index 0000000..0e1d6b7
--- /dev/null
+++ b/drivers/net/switch/switch.c
-@@ -0,0 +1,63 @@
+@@ -0,0 +1,62 @@
+/*
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -120,14 +126,17 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
+
+ return NULL;
+}
+diff --git a/include/switch.h b/include/switch.h
+new file mode 100644
+index 0000000..4a7ae63
--- /dev/null
+++ b/include/switch.h
-@@ -0,0 +1,95 @@
+@@ -0,0 +1,102 @@
+/*
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ */
+
+#ifndef __SWITCH_H
@@ -203,7 +212,14 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
+ * Probe the available switch chips and connect the found one
+ * with the given MII bus
+ */
++#ifdef CONFIG_SWITCH_MULTI
+extern struct switch_device *switch_connect(struct mii_dev *bus);
++#else
++static inline struct switch_device *switch_connect(struct mii_dev *bus)
++{
++ return NULL;
++}
++#endif
+
+/*
+ * Setup the given switch device
@@ -218,9 +234,11 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
+
+#endif /* __SWITCH_H */
+
+diff --git a/net/eth.c b/net/eth.c
+index c96e767..03ecc1c 100644
--- a/net/eth.c
+++ b/net/eth.c
-@@ -26,6 +26,7 @@
+@@ -10,6 +10,7 @@
#include <net.h>
#include <miiphy.h>
#include <phy.h>
@@ -228,7 +246,7 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
void eth_parse_enetaddr(const char *addr, uchar *enetaddr)
{
-@@ -303,6 +304,8 @@ int eth_initialize(bd_t *bis)
+@@ -287,6 +288,8 @@ int eth_initialize(bd_t *bis)
phy_init();
#endif
@@ -237,3 +255,6 @@ Cc: Joe Hershberger <joe.hershberger@gmail.com>
eth_env_init(bis);
/*
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0009-sf-eon-add-support-for-EN25QH256.patch b/package/boot/uboot-lantiq/patches/0009-sf-eon-add-support-for-EN25QH256.patch
deleted file mode 100644
index 18f5823..0000000
--- a/package/boot/uboot-lantiq/patches/0009-sf-eon-add-support-for-EN25QH256.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From e510be1145796cd44cf5800e187a94ad7c19e764 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 14:10:34 +0100
-Subject: sf: eon: add support for EN25QH256
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/eon.c
-+++ b/drivers/mtd/spi/eon.c
-@@ -29,6 +29,11 @@ static const struct eon_spi_flash_params
- .nr_sectors = 4096,
- .name = "EN25Q128",
- },
-+ {
-+ .idcode = 0x7019,
-+ .nr_sectors = 8192,
-+ .name = "EN25QH256",
-+ },
- };
-
- static __maybe_unused int eon_set_4byte_mode(struct spi_flash *flash)
diff --git a/package/boot/uboot-lantiq/patches/0020-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch b/package/boot/uboot-lantiq/patches/0010-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch
index c017e0f..8e7803a 100644
--- a/package/boot/uboot-lantiq/patches/0020-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch
+++ b/package/boot/uboot-lantiq/patches/0010-net-switchlib-add-driver-for-Lantiq-PSB697X-switch-f.patch
@@ -1,13 +1,15 @@
-From b8c666eda693906488637c414db9db35b6760e4a Mon Sep 17 00:00:00 2001
+From e2c59cedebf72e4a002134a2932f722b508a5448 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Wed, 29 Aug 2012 22:08:15 +0200
Subject: net: switchlib: add driver for Lantiq PSB697X switch family
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile
+index 31719d8..a426774 100644
--- a/drivers/net/switch/Makefile
+++ b/drivers/net/switch/Makefile
-@@ -11,6 +11,7 @@ include $(TOPDIR)/config.mk
+@@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libswitch.o
COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
@@ -15,14 +17,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/net/switch/psb697x.c b/drivers/net/switch/psb697x.c
+new file mode 100644
+index 0000000..cb6c391
--- /dev/null
+++ b/drivers/net/switch/psb697x.c
-@@ -0,0 +1,119 @@
+@@ -0,0 +1,118 @@
+/*
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -137,9 +141,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ switch_driver_register(&psb697x_drv);
+}
+diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c
+index 0e1d6b7..3d02610 100644
--- a/drivers/net/switch/switch.c
+++ b/drivers/net/switch/switch.c
-@@ -18,6 +18,10 @@ void switch_init(void)
+@@ -17,6 +17,10 @@ void switch_init(void)
INIT_LIST_HEAD(&switch_drivers);
INIT_LIST_HEAD(&switch_devices);
@@ -150,9 +156,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
board_switch_init();
}
+diff --git a/include/switch.h b/include/switch.h
+index 4a7ae63..fd3cdbd 100644
--- a/include/switch.h
+++ b/include/switch.h
-@@ -90,6 +90,7 @@ static inline void switch_setup(struct s
+@@ -97,6 +97,7 @@ static inline void switch_setup(struct switch_device *dev)
}
/* Init functions for supported Switch drivers */
@@ -160,3 +168,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#endif /* __SWITCH_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0010-sf-spansion-fix-device-IDs-and-sector-architecture-f.patch b/package/boot/uboot-lantiq/patches/0010-sf-spansion-fix-device-IDs-and-sector-architecture-f.patch
deleted file mode 100644
index af8c7a1..0000000
--- a/package/boot/uboot-lantiq/patches/0010-sf-spansion-fix-device-IDs-and-sector-architecture-f.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 81a8e9e192d53ce8b5cafd47190d6c6826519d09 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 14:58:59 +0100
-Subject: sf: spansion: fix device IDs and sector architecture for S25FL256S
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spansion.c
-+++ b/drivers/mtd/spi/spansion.c
-@@ -97,11 +97,18 @@ static const struct spansion_spi_flash_p
- .name = "S25FL129P_64K",
- },
- {
-- .idcode1 = 0x2019,
-+ .idcode1 = 0x0219,
- .idcode2 = 0x4d01,
- .pages_per_sector = 256,
- .nr_sectors = 512,
-- .name = "S25FL256S",
-+ .name = "S25FL256S_64K",
-+ },
-+ {
-+ .idcode1 = 0x0219,
-+ .idcode2 = 0x4d00,
-+ .pages_per_sector = 1024,
-+ .nr_sectors = 128,
-+ .name = "S25FL256S_256K",
- },
- };
-
diff --git a/package/boot/uboot-lantiq/patches/0021-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch b/package/boot/uboot-lantiq/patches/0011-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch
index 342fa46..a30da0b 100644
--- a/package/boot/uboot-lantiq/patches/0021-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch
+++ b/package/boot/uboot-lantiq/patches/0011-net-switchlib-add-driver-for-Lantiq-ADM6996I-switch-.patch
@@ -1,13 +1,15 @@
-From fcbbb1beb2ae862f5c703c5719ed0e155cbbf82f Mon Sep 17 00:00:00 2001
+From c291443dc97dadcf0c6afd04688a7d9f79a221b5 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Wed, 29 Aug 2012 22:08:16 +0200
Subject: net: switchlib: add driver for Lantiq ADM6996I switch family
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile
+index a426774..6b7eeb9 100644
--- a/drivers/net/switch/Makefile
+++ b/drivers/net/switch/Makefile
-@@ -12,6 +12,7 @@ LIB := $(obj)libswitch.o
+@@ -11,6 +11,7 @@ LIB := $(obj)libswitch.o
COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o
@@ -15,14 +17,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/net/switch/adm6996i.c b/drivers/net/switch/adm6996i.c
+new file mode 100644
+index 0000000..46fcdc9
--- /dev/null
+++ b/drivers/net/switch/adm6996i.c
-@@ -0,0 +1,116 @@
+@@ -0,0 +1,115 @@
+/*
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -134,9 +138,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ switch_driver_register(&adm6996i_drv);
+}
+diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c
+index 3d02610..ea3fe9c 100644
--- a/drivers/net/switch/switch.c
+++ b/drivers/net/switch/switch.c
-@@ -21,6 +21,9 @@ void switch_init(void)
+@@ -20,6 +20,9 @@ void switch_init(void)
#if defined(CONFIG_SWITCH_PSB697X)
switch_psb697x_init();
#endif
@@ -146,9 +152,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
board_switch_init();
}
+diff --git a/include/switch.h b/include/switch.h
+index fd3cdbd..4b46df0 100644
--- a/include/switch.h
+++ b/include/switch.h
-@@ -91,6 +91,7 @@ static inline void switch_setup(struct s
+@@ -98,6 +98,7 @@ static inline void switch_setup(struct switch_device *dev)
/* Init functions for supported Switch drivers */
extern void switch_psb697x_init(void);
@@ -156,3 +164,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#endif /* __SWITCH_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0011-sf-spansion-add-support-for-4-byte-address-mode.patch b/package/boot/uboot-lantiq/patches/0011-sf-spansion-add-support-for-4-byte-address-mode.patch
deleted file mode 100644
index 9471d47..0000000
--- a/package/boot/uboot-lantiq/patches/0011-sf-spansion-add-support-for-4-byte-address-mode.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 0add8e5c60961d2b99174610df8d3d9d6d192b74 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 14:16:11 +0100
-Subject: sf: spansion: add support for 4-byte address mode
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spansion.c
-+++ b/drivers/mtd/spi/spansion.c
-@@ -31,6 +31,10 @@
-
- #include "spi_flash_internal.h"
-
-+#define S25FLXX_BRRD 0x16 /* Read Bank Register */
-+#define S25FLXX_BRWR 0x17 /* Write Bank Register */
-+#define S25FLXX_BAR_EXTADD (1 << 7) /* Extended address enable */
-+
- struct spansion_spi_flash_params {
- u16 idcode1;
- u16 idcode2;
-@@ -112,6 +116,23 @@ static const struct spansion_spi_flash_p
- },
- };
-
-+static __maybe_unused int spansion_set_4byte_mode(struct spi_flash *flash)
-+{
-+ struct spi_slave *spi = flash->spi;
-+ u8 bar, cmd;
-+ int err;
-+
-+ cmd = S25FLXX_BRRD;
-+ err = spi_flash_cmd(spi, cmd, &bar, 1);
-+ if (err)
-+ return err;
-+
-+ bar |= S25FLXX_BAR_EXTADD;
-+ cmd = S25FLXX_BRWR;
-+
-+ return spi_flash_cmd_write(spi, &cmd, 1, &bar, 1);
-+}
-+
- int spi_flash_probe_spansion(struct spi_flash *flash, u8 *idcode)
- {
- const struct spansion_spi_flash_params *params;
-@@ -144,5 +165,10 @@ int spi_flash_probe_spansion(struct spi_
- flash->sector_size = 256 * params->pages_per_sector;
- flash->size = flash->sector_size * params->nr_sectors;
-
-+#ifdef CONFIG_SPI_FLASH_4BYTE_MODE
-+ if (flash->size > (1 << 24))
-+ flash->set_4byte_mode = spansion_set_4byte_mode;
-+#endif
-+
- return 1;
- }
diff --git a/package/boot/uboot-lantiq/patches/0022-net-switchlib-add-driver-for-Atheros-AR8216.patch b/package/boot/uboot-lantiq/patches/0012-net-switchlib-add-driver-for-Atheros-AR8216.patch
index 127c0d8..c270b88 100644
--- a/package/boot/uboot-lantiq/patches/0022-net-switchlib-add-driver-for-Atheros-AR8216.patch
+++ b/package/boot/uboot-lantiq/patches/0012-net-switchlib-add-driver-for-Atheros-AR8216.patch
@@ -1,14 +1,16 @@
-From 16b8c52f80f20e07866e397ff52ff9658766437b Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
+From 1a1d61a2faf0390033a3766559ce0e758e15894e Mon Sep 17 00:00:00 2001
+From: Luka Perkov <openwrt@lukaperkov.net>
Date: Wed, 29 Aug 2012 22:08:16 +0200
Subject: net: switchlib: add driver for Atheros AR8216
-Signed-off-by: Luka Perkov <luka@openwrt.org>
+Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile
+index 6b7eeb9..7400897 100644
--- a/drivers/net/switch/Makefile
+++ b/drivers/net/switch/Makefile
-@@ -13,6 +13,7 @@ LIB := $(obj)libswitch.o
+@@ -12,6 +12,7 @@ LIB := $(obj)libswitch.o
COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o
COBJS-$(CONFIG_SWITCH_ADM6996I) += adm6996i.o
@@ -16,14 +18,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/net/switch/ar8216.c b/drivers/net/switch/ar8216.c
+new file mode 100644
+index 0000000..f1348f0
--- /dev/null
+++ b/drivers/net/switch/ar8216.c
-@@ -0,0 +1,115 @@
+@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
+ *
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -134,9 +138,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ switch_driver_register(&ar8216_drv);
+}
+diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c
+index ea3fe9c..3e34a7f 100644
--- a/drivers/net/switch/switch.c
+++ b/drivers/net/switch/switch.c
-@@ -24,6 +24,9 @@ void switch_init(void)
+@@ -23,6 +23,9 @@ void switch_init(void)
#if defined(CONFIG_SWITCH_ADM6996I)
switch_adm6996i_init();
#endif
@@ -146,9 +152,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
board_switch_init();
}
+diff --git a/include/switch.h b/include/switch.h
+index 4b46df0..ae7b123 100644
--- a/include/switch.h
+++ b/include/switch.h
-@@ -92,6 +92,7 @@ static inline void switch_setup(struct s
+@@ -99,6 +99,7 @@ static inline void switch_setup(struct switch_device *dev)
/* Init functions for supported Switch drivers */
extern void switch_psb697x_init(void);
extern void switch_adm6996i_init(void);
@@ -156,3 +164,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#endif /* __SWITCH_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0012-sf-spansion-add-support-for-S25FL512S.patch b/package/boot/uboot-lantiq/patches/0012-sf-spansion-add-support-for-S25FL512S.patch
deleted file mode 100644
index 5f415a9..0000000
--- a/package/boot/uboot-lantiq/patches/0012-sf-spansion-add-support-for-S25FL512S.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From bff335ac524843bc90163c3b231091a5016f8670 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 15:07:54 +0100
-Subject: sf: spansion: add support for S25FL512S
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spansion.c
-+++ b/drivers/mtd/spi/spansion.c
-@@ -114,6 +114,13 @@ static const struct spansion_spi_flash_p
- .nr_sectors = 128,
- .name = "S25FL256S_256K",
- },
-+ {
-+ .idcode1 = 0x0220,
-+ .idcode2 = 0x4d00,
-+ .pages_per_sector = 1024,
-+ .nr_sectors = 256,
-+ .name = "S25FL512S_256K",
-+ },
- };
-
- static __maybe_unused int spansion_set_4byte_mode(struct spi_flash *flash)
diff --git a/package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driver-for-REALTEK-RTL8306.patch b/package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driver-for-REALTEK-RTL8306.patch
new file mode 100644
index 0000000..e6bb374
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driver-for-REALTEK-RTL8306.patch
@@ -0,0 +1,387 @@
+From 42cb399df978a33539b95d668b3f973d927cb902 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 17 Dec 2012 23:37:57 +0100
+Subject: net: switchlib: add driver for REALTEK RTL8306
+
+Signed-off-by: Oliver Muth <dr.o.muth@gmx.de>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/drivers/net/switch/Makefile b/drivers/net/switch/Makefile
+index 7400897..08c6972 100644
+--- a/drivers/net/switch/Makefile
++++ b/drivers/net/switch/Makefile
+@@ -13,6 +13,7 @@ COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
+ COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o
+ COBJS-$(CONFIG_SWITCH_ADM6996I) += adm6996i.o
+ COBJS-$(CONFIG_SWITCH_AR8216) += ar8216.o
++COBJS-$(CONFIG_SWITCH_RTL8306) += rtl8306.o
+
+ COBJS := $(COBJS-y)
+ SRCS := $(COBJS:.o=.c)
+diff --git a/drivers/net/switch/rtl8306.c b/drivers/net/switch/rtl8306.c
+new file mode 100644
+index 0000000..7a6a917
+--- /dev/null
++++ b/drivers/net/switch/rtl8306.c
+@@ -0,0 +1,332 @@
++/*
++ * Based on OpenWRT linux driver
++ *
++ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++#define DEBUG
++#include <common.h>
++#include <malloc.h>
++#include <switch.h>
++#include <miiphy.h>
++
++#define RTL8306_REG_PAGE 16
++#define RTL8306_REG_PAGE_LO (1 << 15)
++#define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */
++#define RTL8306_CHIPID 0x5988
++
++#define RTL8306_NUM_VLANS 16
++#define RTL8306_NUM_PORTS 6
++#define RTL8306_PORT_CPU 5
++#define RTL8306_NUM_PAGES 4
++#define RTL8306_NUM_REGS 32
++
++enum {
++ RTL_TYPE_S,
++ RTL_TYPE_SD,
++ RTL_TYPE_SDM,
++};
++
++struct rtl_reg {
++ int page;
++ int phy;
++ int reg;
++ int bits;
++ int shift;
++ int inverted;
++};
++
++enum rtl_regidx {
++ RTL_REG_CHIPID,
++ RTL_REG_CHIPVER,
++ RTL_REG_CHIPTYPE,
++ RTL_REG_CPUPORT,
++
++ RTL_REG_EN_CPUPORT,
++ RTL_REG_EN_TAG_OUT,
++ RTL_REG_EN_TAG_CLR,
++ RTL_REG_EN_TAG_IN,
++ RTL_REG_TRAP_CPU,
++ RTL_REG_TRUNK_PORTSEL,
++ RTL_REG_EN_TRUNK,
++ RTL_REG_RESET,
++ RTL_REG_PHY_RESET,
++ RTL_REG_CPU_LINKUP,
++
++ RTL_REG_VLAN_ENABLE,
++ RTL_REG_VLAN_FILTER,
++ RTL_REG_VLAN_TAG_ONLY,
++ RTL_REG_VLAN_TAG_AWARE,
++#define RTL_VLAN_ENUM(id) \
++ RTL_REG_VLAN##id##_VID, \
++ RTL_REG_VLAN##id##_PORTMASK
++ RTL_VLAN_ENUM(0),
++ RTL_VLAN_ENUM(1),
++ RTL_VLAN_ENUM(2),
++ RTL_VLAN_ENUM(3),
++ RTL_VLAN_ENUM(4),
++ RTL_VLAN_ENUM(5),
++ RTL_VLAN_ENUM(6),
++ RTL_VLAN_ENUM(7),
++ RTL_VLAN_ENUM(8),
++ RTL_VLAN_ENUM(9),
++ RTL_VLAN_ENUM(10),
++ RTL_VLAN_ENUM(11),
++ RTL_VLAN_ENUM(12),
++ RTL_VLAN_ENUM(13),
++ RTL_VLAN_ENUM(14),
++ RTL_VLAN_ENUM(15),
++#define RTL_PORT_ENUM(id) \
++ RTL_REG_PORT##id##_PVID, \
++ RTL_REG_PORT##id##_NULL_VID_REPLACE, \
++ RTL_REG_PORT##id##_NON_PVID_DISCARD, \
++ RTL_REG_PORT##id##_VID_INSERT, \
++ RTL_REG_PORT##id##_TAG_INSERT, \
++ RTL_REG_PORT##id##_LINK, \
++ RTL_REG_PORT##id##_SPEED, \
++ RTL_REG_PORT##id##_NWAY, \
++ RTL_REG_PORT##id##_NRESTART, \
++ RTL_REG_PORT##id##_DUPLEX, \
++ RTL_REG_PORT##id##_RXEN, \
++ RTL_REG_PORT##id##_TXEN, \
++ RTL_REG_PORT##id##_LRNEN
++ RTL_PORT_ENUM(0),
++ RTL_PORT_ENUM(1),
++ RTL_PORT_ENUM(2),
++ RTL_PORT_ENUM(3),
++ RTL_PORT_ENUM(4),
++ RTL_PORT_ENUM(5),
++};
++
++static const struct rtl_reg rtl_regs[] = {
++ [RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 },
++ [RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 },
++ [RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 },
++
++ /* CPU port number */
++ [RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 },
++ /* Enable CPU port function */
++ [RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 },
++ /* Enable CPU port tag insertion */
++ [RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 },
++ /* Enable CPU port tag removal */
++ [RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 },
++ /* Enable CPU port tag checking */
++ [RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 },
++ [RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 },
++ [RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 },
++ [RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 },
++ [RTL_REG_PHY_RESET] = { 0, 0, 0, 1, 15, 0 },
++ [RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 },
++ [RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 },
++
++ [RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 },
++ [RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 },
++ [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 },
++ [RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 },
++
++#define RTL_VLAN_REGS(id, phy, page, regofs) \
++ [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
++ [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
++ RTL_VLAN_REGS( 0, 0, 0, 0),
++ RTL_VLAN_REGS( 1, 1, 0, 0),
++ RTL_VLAN_REGS( 2, 2, 0, 0),
++ RTL_VLAN_REGS( 3, 3, 0, 0),
++ RTL_VLAN_REGS( 4, 4, 0, 0),
++ RTL_VLAN_REGS( 5, 0, 1, 2),
++ RTL_VLAN_REGS( 6, 1, 1, 2),
++ RTL_VLAN_REGS( 7, 2, 1, 2),
++ RTL_VLAN_REGS( 8, 3, 1, 2),
++ RTL_VLAN_REGS( 9, 4, 1, 2),
++ RTL_VLAN_REGS(10, 0, 1, 4),
++ RTL_VLAN_REGS(11, 1, 1, 4),
++ RTL_VLAN_REGS(12, 2, 1, 4),
++ RTL_VLAN_REGS(13, 3, 1, 4),
++ RTL_VLAN_REGS(14, 4, 1, 4),
++ RTL_VLAN_REGS(15, 0, 1, 6),
++
++#define REG_PORT_SETTING(port, phy) \
++ [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
++ [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
++ [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
++ [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
++ [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
++ [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
++ [RTL_REG_PORT##port##_LRNEN] = { 0, phy, 24, 1, 9, 0 }, \
++ [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
++ [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
++ [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
++ [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
++ [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
++
++ REG_PORT_SETTING(0, 0),
++ REG_PORT_SETTING(1, 1),
++ REG_PORT_SETTING(2, 2),
++ REG_PORT_SETTING(3, 3),
++ REG_PORT_SETTING(4, 4),
++ REG_PORT_SETTING(5, 6),
++
++#define REG_PORT_PVID(phy, page, regofs) \
++ { page, phy, 24 + regofs, 4, 12, 0 }
++ [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
++ [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
++ [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
++ [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
++ [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
++ [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
++};
++
++static void rtl_set_page(struct mii_dev *bus, unsigned int page)
++{
++ u16 pgsel;
++
++ BUG_ON(page > RTL8306_NUM_PAGES);
++
++ pgsel = bus->read(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE);
++ pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
++
++ if (page & (1 << 0))
++ pgsel |= RTL8306_REG_PAGE_LO;
++
++ if (!(page & (1 << 1))) /* bit is inverted */
++ pgsel |= RTL8306_REG_PAGE_HI;
++
++ bus->write(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE, pgsel);
++
++}
++
++static __maybe_unused int rtl_w16(struct mii_dev *bus, unsigned int page, unsigned int phy,
++ unsigned int reg, u16 val)
++{
++ rtl_set_page(bus, page);
++
++ bus->write(bus, phy, MDIO_DEVAD_NONE, reg, val);
++ bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
++
++ return 0;
++}
++
++static int rtl_r16(struct mii_dev *bus, unsigned int page, unsigned int phy,
++ unsigned int reg)
++{
++ rtl_set_page(bus, page);
++
++ return bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
++}
++
++static u16 rtl_rmw(struct mii_dev *bus, unsigned int page, unsigned int phy,
++ unsigned int reg, u16 mask, u16 val)
++{
++ u16 r;
++
++ rtl_set_page(bus, page);
++
++ r = bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
++ r &= ~mask;
++ r |= val;
++ bus->write(bus, phy, MDIO_DEVAD_NONE, reg, r);
++
++ return bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
++}
++
++static int rtl_get(struct mii_dev *bus, enum rtl_regidx s)
++{
++ const struct rtl_reg *r = &rtl_regs[s];
++ u16 val;
++
++ BUG_ON(s >= ARRAY_SIZE(rtl_regs));
++
++ if (r->bits == 0) /* unimplemented */
++ return 0;
++
++ val = rtl_r16(bus, r->page, r->phy, r->reg);
++
++ if (r->shift > 0)
++ val >>= r->shift;
++
++ if (r->inverted)
++ val = ~val;
++
++ val &= (1 << r->bits) - 1;
++
++ return val;
++}
++
++static __maybe_unused int rtl_set(struct mii_dev *bus, enum rtl_regidx s, unsigned int val)
++{
++ const struct rtl_reg *r = &rtl_regs[s];
++ u16 mask = 0xffff;
++
++ BUG_ON(s >= ARRAY_SIZE(rtl_regs));
++
++ if (r->bits == 0) /* unimplemented */
++ return 0;
++
++ if (r->shift > 0)
++ val <<= r->shift;
++
++ if (r->inverted)
++ val = ~val;
++
++ if (r->bits != 16) {
++ mask = (1 << r->bits) - 1;
++ mask <<= r->shift;
++ }
++
++ val &= mask;
++
++ return rtl_rmw(bus, r->page, r->phy, r->reg, mask, val);
++}
++
++static int rtl8306_probe(struct switch_device *dev)
++{
++ struct mii_dev *bus = dev->bus;
++ unsigned int chipid, chipver, chiptype;
++
++ chipid = rtl_get(bus, RTL_REG_CHIPID);
++ chipver = rtl_get(bus, RTL_REG_CHIPVER);
++ chiptype = rtl_get(bus, RTL_REG_CHIPTYPE);
++
++ debug("%s: chipid %x, chipver %x, chiptype %x\n",
++ __func__, chipid, chipver, chiptype);
++
++ if (chipid == RTL8306_CHIPID)
++ return 0;
++
++ return 1;
++}
++
++static void rtl8306_setup(struct switch_device *dev)
++{
++ struct mii_dev *bus = dev->bus;
++
++ /* initialize cpu port settings */
++ rtl_set(bus, RTL_REG_CPUPORT, dev->cpu_port);
++ rtl_set(bus, RTL_REG_EN_CPUPORT, 1);
++
++ /* enable phy 5 link status */
++ rtl_set(bus, RTL_REG_CPU_LINKUP, 1);
++// rtl_set(bus, RTL_REG_PORT5_TXEN, 1);
++// rtl_set(bus, RTL_REG_PORT5_RXEN, 1);
++// rtl_set(bus, RTL_REG_PORT5_LRNEN, 1);
++#ifdef DEBUG
++ debug("%s: CPU link up: %i\n",
++ __func__, rtl_get(bus, RTL_REG_PORT5_LINK));
++#endif
++
++}
++
++static struct switch_driver rtl8306_drv = {
++ .name = "rtl8306",
++};
++
++void switch_rtl8306_init(void)
++{
++ /* For archs with manual relocation */
++ rtl8306_drv.probe = rtl8306_probe;
++ rtl8306_drv.setup = rtl8306_setup;
++
++ switch_driver_register(&rtl8306_drv);
++}
+diff --git a/drivers/net/switch/switch.c b/drivers/net/switch/switch.c
+index 3e34a7f..2e1c668 100644
+--- a/drivers/net/switch/switch.c
++++ b/drivers/net/switch/switch.c
+@@ -26,6 +26,9 @@ void switch_init(void)
+ #if defined(CONFIG_SWITCH_AR8216)
+ switch_ar8216_init();
+ #endif
++#if defined(CONFIG_SWITCH_RTL8306)
++ switch_rtl8306_init();
++#endif
+
+ board_switch_init();
+ }
+diff --git a/include/switch.h b/include/switch.h
+index ae7b123..927b1d2 100644
+--- a/include/switch.h
++++ b/include/switch.h
+@@ -100,6 +100,7 @@ static inline void switch_setup(struct switch_device *dev)
+ extern void switch_psb697x_init(void);
+ extern void switch_adm6996i_init(void);
+ extern void switch_ar8216_init(void);
++extern void switch_rtl8306_init(void);
+
+ #endif /* __SWITCH_H */
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0013-sf-macronix-add-support-for-4-byte-address-mode.patch b/package/boot/uboot-lantiq/patches/0013-sf-macronix-add-support-for-4-byte-address-mode.patch
deleted file mode 100644
index 70015c9..0000000
--- a/package/boot/uboot-lantiq/patches/0013-sf-macronix-add-support-for-4-byte-address-mode.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 207662a9270cc542709fbab0d25fbc361b39748c Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 15:13:49 +0100
-Subject: sf: macronix: add support for 4-byte address mode
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/macronix.c
-+++ b/drivers/mtd/spi/macronix.c
-@@ -35,6 +35,8 @@
-
- #include "spi_flash_internal.h"
-
-+#define MX25XX_EN4B 0xb7 /* Enter 4-byte mode */
-+
- struct macronix_spi_flash_params {
- u16 idcode;
- u16 nr_blocks;
-@@ -79,6 +81,13 @@ static const struct macronix_spi_flash_p
- },
- };
-
-+static __maybe_unused int macronix_set_4byte_mode(struct spi_flash *flash)
-+{
-+ struct spi_slave *spi = flash->spi;
-+
-+ return spi_flash_cmd(spi, MX25XX_EN4B, NULL, 0);
-+}
-+
- int spi_flash_probe_macronix(struct spi_flash *flash, u8 *idcode)
- {
- const struct macronix_spi_flash_params *params;
-@@ -106,6 +115,11 @@ int spi_flash_probe_macronix(struct spi_
- flash->sector_size = 256 * 16 * 16;
- flash->size = flash->sector_size * params->nr_blocks;
-
-+#ifdef CONFIG_SPI_FLASH_4BYTE_MODE
-+ if (flash->size > (1 << 24))
-+ flash->set_4byte_mode = macronix_set_4byte_mode;
-+#endif
-+
- /* Clear BP# bits for read-only flash */
- spi_flash_cmd_write_status(flash, 0);
-
diff --git a/package/boot/uboot-lantiq/patches/0023-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch b/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
index 2582c16..6f3be69 100644
--- a/package/boot/uboot-lantiq/patches/0023-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
+++ b/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
@@ -1,16 +1,19 @@
-From ed2effe0839929d00f05ec0e1e16fb467f324e1b Mon Sep 17 00:00:00 2001
+From 11553b0de8992ded6240d034bd49f561d17bea53 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Thu, 20 Dec 2012 19:05:54 +0100
+Date: Thu, 13 Jun 2013 01:18:02 +0200
Subject: MIPS: add support for Lantiq XWAY SoCs
+Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/.gitignore b/.gitignore
+index a39bd54..7abdc37 100644
--- a/.gitignore
+++ b/.gitignore
-@@ -44,6 +44,13 @@
+@@ -49,6 +49,13 @@
/u-boot.sb
+ /u-boot.bd
/u-boot.geany
- /include/u-boot.lst
+/u-boot.bin.lzma
+/u-boot.bin.lzo
+/u-boot.ltq.lzma.norspl
@@ -21,9 +24,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#
# Generated files
+diff --git a/Makefile b/Makefile
+index 6ee9a3c..73ec67d 100644
--- a/Makefile
+++ b/Makefile
-@@ -441,6 +441,12 @@ $(obj)u-boot.bin: $(obj)u-boot
+@@ -435,6 +435,12 @@ $(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(BOARD_SIZE_CHECK)
@@ -36,7 +41,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
$(obj)u-boot.ldr: $(obj)u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
-@@ -460,13 +466,23 @@ ifndef CONFIG_SYS_UBOOT_START
+@@ -454,13 +460,23 @@ ifndef CONFIG_SYS_UBOOT_START
CONFIG_SYS_UBOOT_START := 0
endif
@@ -60,11 +65,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+$(obj)u-boot.lzo.img: $(obj)u-boot.bin.lzo
+ $(call GEN_UBOOT_IMAGE,lzo)
- $(obj)u-boot.imx: $(obj)u-boot.bin
- $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
-@@ -549,6 +565,27 @@ endif
- $(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
- cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+ $(obj)u-boot.imx: $(obj)u-boot.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
+@@ -571,6 +587,27 @@ $(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+ conv=notrunc 2>/dev/null
+ cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+$(obj)u-boot.ltq.sfspl: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/ltq-boot-image -t sfspl -e $(CONFIG_SPL_TEXT_BASE) \
@@ -90,9 +95,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
+diff --git a/README b/README
+index 09662a4..1acceff 100644
--- a/README
+++ b/README
-@@ -460,6 +460,11 @@ The following options need to be configu
+@@ -468,6 +468,11 @@ The following options need to be configured:
CONF_CM_CACHABLE_CUW
CONF_CM_CACHABLE_ACCELERATED
@@ -104,23 +111,31 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
CONFIG_SYS_XWAY_EBU_BOOTCFG
Special option for Lantiq XWAY SoCs for booting from NOR flash.
+diff --git a/arch/mips/config.mk b/arch/mips/config.mk
+index c3f81b5..84b6e59 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
-@@ -61,7 +61,10 @@ PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__M
+@@ -45,9 +45,13 @@ PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
# to RAM. $28 is always used as gp.
#
-PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic $(ENDIANNESS)
+PF_ABICALLS ?= -mabicalls
+PF_PIC ?= -fpic
++PF_PIE ?= -pie
+
+PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC) $(ENDIANNESS)
PLATFORM_CPPFLAGS += -msoft-float
PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS)
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+-LDFLAGS_FINAL += --gc-sections -pie
++LDFLAGS_FINAL += --gc-sections $(PF_PIE)
+ OBJCFLAGS += --remove-section=.dynsym
+diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S
+index 12f656c..8620a9d 100644
--- a/arch/mips/cpu/mips32/cache.S
+++ b/arch/mips/cpu/mips32/cache.S
-@@ -45,7 +45,11 @@
+@@ -29,7 +29,11 @@
*/
#define MIPS_MAX_CACHE_SIZE 0x10000
@@ -132,7 +147,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
.macro cache_op op addr
.set push
-@@ -81,7 +85,11 @@
+@@ -65,7 +69,11 @@
*/
LEAF(mips_init_icache)
blez a1, 9f
@@ -144,7 +159,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
/* clear tag to invalidate */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
-@@ -106,7 +114,11 @@ LEAF(mips_init_icache)
+@@ -90,7 +98,11 @@ LEAF(mips_init_icache)
*/
LEAF(mips_init_dcache)
blez a1, 9f
@@ -156,15 +171,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
/* clear all tags */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
+diff --git a/arch/mips/cpu/mips32/danube/Makefile b/arch/mips/cpu/mips32/danube/Makefile
+new file mode 100644
+index 0000000..98f5f73
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/Makefile
-@@ -0,0 +1,33 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -192,15 +208,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/arch/mips/cpu/mips32/danube/cgu.c b/arch/mips/cpu/mips32/danube/cgu.c
+new file mode 100644
+index 0000000..4fd110a
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/cgu.c
-@@ -0,0 +1,118 @@
+@@ -0,0 +1,117 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -313,15 +331,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return clk;
+}
+diff --git a/arch/mips/cpu/mips32/danube/cgu_init.S b/arch/mips/cpu/mips32/danube/cgu_init.S
+new file mode 100644
+index 0000000..e0922f1
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/cgu_init.S
-@@ -0,0 +1,143 @@
+@@ -0,0 +1,142 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
@@ -459,14 +479,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ jr ra
+
+ END(ltq_cgu_init)
+diff --git a/arch/mips/cpu/mips32/danube/chipid.c b/arch/mips/cpu/mips32/danube/chipid.c
+new file mode 100644
+index 0000000..02d9554
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/chipid.c
-@@ -0,0 +1,60 @@
+@@ -0,0 +1,59 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -522,14 +544,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return "";
+}
+diff --git a/arch/mips/cpu/mips32/danube/config.mk b/arch/mips/cpu/mips32/danube/config.mk
+new file mode 100644
+index 0000000..cee376f
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/config.mk
-@@ -0,0 +1,27 @@
+@@ -0,0 +1,25 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PF_CPPFLAGS_DANUBE := $(call cc-option,-mtune=24kec,)
@@ -538,6 +562,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ifdef CONFIG_SPL_BUILD
+PF_ABICALLS := -mno-abicalls
+PF_PIC := -fno-pic
++PF_PIE :=
+USE_PRIVATE_LIBGCC := yes
+endif
+
@@ -550,25 +575,59 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
+endif
+endif
-+
-+LDSCRIPT := $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.lds
+diff --git a/arch/mips/cpu/mips32/danube/ebu.c b/arch/mips/cpu/mips32/danube/ebu.c
+new file mode 100644
+index 0000000..902f6a7
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/ebu.c
-@@ -0,0 +1,51 @@
+@@ -0,0 +1,105 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
-+#define LTQ_EBU_CON_0_RST_VAL 0x8001F7FF
++#define EBU_ADDRSEL_MASK(mask) ((mask & 0xf) << 4)
++#define EBU_ADDRSEL_REGEN (1 << 0)
++
++#define EBU_CON_WRDIS (1 << 31)
++#define EBU_CON_AGEN_DEMUX (0x0 << 24)
++#define EBU_CON_AGEN_MUX (0x2 << 24)
++#define EBU_CON_SETUP (1 << 22)
++#define EBU_CON_WAIT_DIS (0x0 << 20)
++#define EBU_CON_WAIT_ASYNC (0x1 << 20)
++#define EBU_CON_WAIT_SYNC (0x2 << 20)
++#define EBU_CON_WINV (1 << 19)
++#define EBU_CON_PW_8BIT (0x0 << 16)
++#define EBU_CON_PW_16BIT (0x1 << 16)
++#define EBU_CON_ALEC(cycles) ((cycles & 0x3) << 14)
++#define EBU_CON_BCGEN_CS (0x0 << 12)
++#define EBU_CON_BCGEN_INTEL (0x1 << 12)
++#define EBU_CON_BCGEN_MOTOROLA (0x2 << 12)
++#define EBU_CON_WAITWRC(cycles) ((cycles & 0x7) << 8)
++#define EBU_CON_WAITRDC(cycles) ((cycles & 0x3) << 6)
++#define EBU_CON_HOLDC(cycles) ((cycles & 0x3) << 4)
++#define EBU_CON_RECOVC(cycles) ((cycles & 0x3) << 2)
++#define EBU_CON_CMULT_1 0x0
++#define EBU_CON_CMULT_4 0x1
++#define EBU_CON_CMULT_8 0x2
++#define EBU_CON_CMULT_16 0x3
++
++#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
++#define ebu_region0_enable 1
++#else
++#define ebu_region0_enable 0
++#endif
+
-+#define LTQ_EBU_CON_WRDIS (1 << 31)
++#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
++#define ebu_region1_enable 1
++#else
++#define ebu_region1_enable 0
++#endif
+
+struct ltq_ebu_regs {
+ u32 clc;
@@ -587,33 +646,56 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+void ltq_ebu_init(void)
+{
-+ /*
-+ * Map EBU region 0 to range 0x10000000-0x13ffffff and enable
-+ * region control. This supports up to 32 MiB NOR flash in
-+ * bank 0.
-+ */
-+ ltq_writel(&ltq_ebu_regs->addr_sel_0, 0x10000011);
++ if (ebu_region0_enable) {
++ /*
++ * Map EBU region 0 to range 0x10000000-0x13ffffff and enable
++ * region control. This supports up to 32 MiB NOR flash in
++ * bank 0.
++ */
++ ltq_writel(&ltq_ebu_regs->addr_sel_0, LTQ_EBU_REGION0_BASE |
++ EBU_ADDRSEL_MASK(1) | EBU_ADDRSEL_REGEN);
+
-+ /*
-+ * Restore reset value to fix modifications by internal BootROM.
-+ * Also disable write protection.
-+ */
-+ ltq_writel(&ltq_ebu_regs->con_0,
-+ LTQ_EBU_CON_0_RST_VAL & ~LTQ_EBU_CON_WRDIS);
++ ltq_writel(&ltq_ebu_regs->con_0, EBU_CON_AGEN_DEMUX |
++ EBU_CON_WAIT_DIS | EBU_CON_PW_16BIT |
++ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
++ EBU_CON_WAITWRC(7) | EBU_CON_WAITRDC(3) |
++ EBU_CON_HOLDC(3) | EBU_CON_RECOVC(3) |
++ EBU_CON_CMULT_16);
++ } else
++ ltq_clrbits(&ltq_ebu_regs->addr_sel_0, EBU_ADDRSEL_REGEN);
++
++ if (ebu_region1_enable) {
++ /*
++ * Map EBU region 1 to range 0x14000000-0x13ffffff and enable
++ * region control. This supports NAND flash in bank 1.
++ */
++ ltq_writel(&ltq_ebu_regs->addr_sel_1, LTQ_EBU_REGION1_BASE |
++ EBU_ADDRSEL_MASK(3) | EBU_ADDRSEL_REGEN);
++
++ ltq_writel(&ltq_ebu_regs->con_1, EBU_CON_AGEN_DEMUX |
++ EBU_CON_SETUP | EBU_CON_WAIT_DIS | EBU_CON_PW_8BIT |
++ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
++ EBU_CON_WAITWRC(2) | EBU_CON_WAITRDC(2) |
++ EBU_CON_HOLDC(1) | EBU_CON_RECOVC(1) |
++ EBU_CON_CMULT_4);
++ } else
++ ltq_clrbits(&ltq_ebu_regs->addr_sel_1, EBU_ADDRSEL_REGEN);
+}
+
+void *flash_swap_addr(unsigned long addr)
+{
+ return (void *)(addr ^ 2);
+}
+diff --git a/arch/mips/cpu/mips32/danube/mem.c b/arch/mips/cpu/mips32/danube/mem.c
+new file mode 100644
+index 0000000..be1922c
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/mem.c
-@@ -0,0 +1,31 @@
+@@ -0,0 +1,30 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -640,15 +722,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return (1 << (row + col)) * 4 * 2;
+}
+diff --git a/arch/mips/cpu/mips32/danube/mem_init.S b/arch/mips/cpu/mips32/danube/mem_init.S
+new file mode 100644
+index 0000000..47a35e1
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/mem_init.S
-@@ -0,0 +1,115 @@
+@@ -0,0 +1,114 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
@@ -758,14 +842,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ jr ra
+
+ END(ltq_mem_init)
+diff --git a/arch/mips/cpu/mips32/danube/pmu.c b/arch/mips/cpu/mips32/danube/pmu.c
+new file mode 100644
+index 0000000..7dd8aea
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/pmu.c
-@@ -0,0 +1,118 @@
+@@ -0,0 +1,117 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -879,14 +965,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ ltq_clrsetbits(&ltq_pmu_regs->pwdcr, clr, set);
+}
+diff --git a/arch/mips/cpu/mips32/danube/rcu.c b/arch/mips/cpu/mips32/danube/rcu.c
+new file mode 100644
+index 0000000..906491a
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/rcu.c
-@@ -0,0 +1,126 @@
+@@ -0,0 +1,125 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -1008,87 +1096,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ return BOOT_UNKNOWN;
+ }
+}
---- /dev/null
-+++ b/arch/mips/cpu/mips32/danube/u-boot.lds
-@@ -0,0 +1,69 @@
-+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
-+ * Copyright (C) 2003 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
-+ */
-+
-+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-+OUTPUT_ARCH(mips)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text : {
-+ *(.text*)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : {
-+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-+ }
-+
-+ . = ALIGN(4);
-+ .data : {
-+ *(.data*)
-+ }
-+
-+ . = ALIGN(4);
-+ .sdata : {
-+ *(.sdata*)
-+ }
-+
-+ . = .;
-+ _gp = ALIGN(16) + 0x7ff0;
-+
-+ .got : {
-+ __got_start = .;
-+ *(.got)
-+ __got_end = .;
-+ }
-+
-+ num_got_entries = (__got_end - __got_start) >> 2;
-+
-+#ifndef CONFIG_SPL_BUILD
-+ . = ALIGN(4);
-+ .u_boot_list : {
-+ #include <u-boot.lst>
-+ }
-+#endif
-+
-+ . = ALIGN(4);
-+ __image_copy_end = .;
-+ uboot_end_data = .;
-+
-+ .bss (NOLOAD) : {
-+ __bss_start = .;
-+ *(.bss*)
-+ *(.sbss*)
-+ . = ALIGN(4);
-+ __bss_end = .;
-+ }
-+
-+ . = ALIGN(4);
-+ __end = .;
-+ uboot_end = .;
-+}
+diff --git a/arch/mips/cpu/mips32/lantiq-common/Makefile b/arch/mips/cpu/mips32/lantiq-common/Makefile
+new file mode 100644
+index 0000000..260d67c
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/Makefile
-@@ -0,0 +1,36 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -1119,14 +1136,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/arch/mips/cpu/mips32/lantiq-common/cpu.c b/arch/mips/cpu/mips32/lantiq-common/cpu.c
+new file mode 100644
+index 0000000..4a7acdf
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/cpu.c
-@@ -0,0 +1,60 @@
+@@ -0,0 +1,59 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -1182,14 +1201,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ ltq_reset_activate(LTQ_RESET_CORE);
+}
+diff --git a/arch/mips/cpu/mips32/lantiq-common/lowlevel_init.S b/arch/mips/cpu/mips32/lantiq-common/lowlevel_init.S
+new file mode 100644
+index 0000000..ad03b04
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/lowlevel_init.S
-@@ -0,0 +1,21 @@
+@@ -0,0 +1,20 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/asm.h>
@@ -1206,27 +1227,31 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ jr t8
+ END(lowlevel_init)
+diff --git a/arch/mips/cpu/mips32/lantiq-common/pmu.c b/arch/mips/cpu/mips32/lantiq-common/pmu.c
+new file mode 100644
+index 0000000..8f0dac1
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/pmu.c
-@@ -0,0 +1,10 @@
+@@ -0,0 +1,9 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/pm.h>
+
+diff --git a/arch/mips/cpu/mips32/lantiq-common/spl.c b/arch/mips/cpu/mips32/lantiq-common/spl.c
+new file mode 100644
+index 0000000..489a82b
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/spl.c
-@@ -0,0 +1,385 @@
+@@ -0,0 +1,403 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -1249,6 +1274,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+#else
+#define spl_has_console 0
++#define spl_has_debug 0
+#endif
+
+#define spl_debug(fmt, args...) \
@@ -1292,13 +1318,12 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+struct spl_image {
+ ulong data_addr;
+ ulong entry_addr;
-+ size_t data_size;
-+ size_t entry_size;
++ ulong data_size;
++ ulong entry_size;
++ ulong data_crc;
+ u8 comp;
+};
+
-+extern ulong __image_copy_end;
-+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Emulated malloc area needed for LZMA allocator in BSS */
@@ -1352,25 +1377,42 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+static int spl_parse_image(const image_header_t *hdr, struct spl_image *spl)
+{
-+ u32 magic;
-+
+ spl_puts("SPL: checking U-Boot image\n");
+
-+ magic = image_get_magic(hdr);
-+ if (magic != IH_MAGIC)
++ if (!image_check_magic(hdr)) {
++ spl_puts("SPL: invalid magic\n");
+ return -1;
++ }
++
++ if (!image_check_hcrc(hdr)) {
++ spl_puts("SPL: invalid header CRC\n");
++ return -1;
++ }
+
+ spl->data_addr += image_get_header_size();
+ spl->entry_addr = image_get_load(hdr);
+ spl->data_size = image_get_data_size(hdr);
++ spl->data_crc = image_get_dcrc(hdr);
+ spl->comp = image_get_comp(hdr);
+
-+ spl_debug("SPL: data %08lx, size %zu, entry %08lx, comp %u\n",
++ spl_debug("SPL: data %08lx, size %lu, entry %08lx, comp %u\n",
+ spl->data_addr, spl->data_size, spl->entry_addr, spl->comp);
+
+ return 0;
+}
+
++static int spl_check_data(const struct spl_image *spl, ulong loadaddr)
++{
++ ulong dcrc = crc32(0, (unsigned char *)loadaddr, spl->data_size);
++
++ if (dcrc != spl->data_crc) {
++ spl_puts("SPL: invalid data CRC\n");
++ return 0;
++ }
++
++ return 1;
++}
++
+static void *spl_lzma_alloc(void *p, size_t size)
+{
+ u8 *ret;
@@ -1462,7 +1504,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+static int spl_load_spi_flash(struct spl_image *spl)
+{
-+ struct spi_flash sf;
++ struct spi_flash sf = { 0 };
+ image_header_t hdr;
+ int ret;
+ unsigned long loadaddr;
@@ -1476,13 +1518,12 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * - 64 byte U-Boot mkimage header
+ * - U-Boot binary
+ */
-+ spl->data_addr = (ulong) &__image_copy_end - CONFIG_SPL_TEXT_BASE + 24;
++ spl->data_addr = image_copy_end() - CONFIG_SPL_TEXT_BASE + 24;
+
+ spl_puts("SPL: probing SPI flash\n");
+
+ spi_init();
-+ ret = spi_flash_probe_spl(&sf, CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
-+ CONFIG_SPL_SPI_MAX_HZ, CONFIG_SPL_SPI_MODE);
++ ret = spl_spi_flash_probe(&sf);
+ if (ret)
+ return ret;
+
@@ -1508,6 +1549,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ ret = spi_flash_read(&sf, spl->data_addr, spl->data_size,
+ (void *) loadaddr);
+
++ if (!spl_check_data(spl, loadaddr))
++ return -1;
++
+ if (spl_is_compressed(spl))
+ ret = spl_uncompress(spl, loadaddr);
+
@@ -1526,8 +1570,8 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * - 64 byte U-Boot mkimage header
+ * - U-Boot binary
+ */
-+ spl->data_addr = (ulong) &__image_copy_end;
-+ hdr = (const image_header_t *) &__image_copy_end;
++ spl->data_addr = image_copy_end();
++ hdr = (const image_header_t *) image_copy_end();
+
+ spl_debug("SPL: checking image header at address %p\n", hdr);
+
@@ -1607,15 +1651,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ for (;;)
+ ;
+}
+diff --git a/arch/mips/cpu/mips32/lantiq-common/start.S b/arch/mips/cpu/mips32/lantiq-common/start.S
+new file mode 100644
+index 0000000..481d739
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/start.S
-@@ -0,0 +1,144 @@
+@@ -0,0 +1,143 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2003 Wolfgang Denk, wd@denx.de
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
@@ -1754,14 +1800,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ la t9, spl_lantiq_init
+ jr t9
+ nop
+diff --git a/arch/mips/cpu/mips32/lantiq-common/u-boot-spl.lds b/arch/mips/cpu/mips32/lantiq-common/u-boot-spl.lds
+new file mode 100644
+index 0000000..97c8fa8
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/u-boot-spl.lds
-@@ -0,0 +1,49 @@
+@@ -0,0 +1,48 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .spl_mem : ORIGIN = CONFIG_SPL_TEXT_BASE, \
@@ -1806,229 +1854,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ __end = .;
+ uboot_end = .;
+}
+diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
+index 70ad198..091a4e2 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
-@@ -55,166 +55,63 @@
- #endif
- .endm
-
--#define RVECENT(f,n) \
-- b f; nop
--#define XVECENT(f,bev) \
-- b f ; \
-- li k0,bev
--
-- .set noreorder
--
-- .globl _start
-- .text
--_start:
-- RVECENT(reset,0) # U-boot entry point
-- RVECENT(reset,1) # software reboot
--#ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG
- /*
- * Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to
- * access external NOR flashes. If the board boots from NOR flash the
- * internal BootROM does a blind read at address 0xB0000010 to read the
- * initial configuration for that EBU in order to access the flash
- * device with correct parameters. This config option is board-specific.
-+ * Default to 0 if this option is not set.
- */
-- .word CONFIG_SYS_XWAY_EBU_BOOTCFG
-- .word 0x00000000
-+ .macro lantiq_soc_bootcfg
-+ .set push
-+ .set noreorder
-+ .org 0x10
-+#ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG
-+ .word CONFIG_SYS_XWAY_EBU_BOOTCFG
- #else
-- RVECENT(romReserved,2)
-+ .word 0
- #endif
-- RVECENT(romReserved,3)
-- RVECENT(romReserved,4)
-- RVECENT(romReserved,5)
-- RVECENT(romReserved,6)
-- RVECENT(romReserved,7)
-- RVECENT(romReserved,8)
-- RVECENT(romReserved,9)
-- RVECENT(romReserved,10)
-- RVECENT(romReserved,11)
-- RVECENT(romReserved,12)
-- RVECENT(romReserved,13)
-- RVECENT(romReserved,14)
-- RVECENT(romReserved,15)
-- RVECENT(romReserved,16)
-- RVECENT(romReserved,17)
-- RVECENT(romReserved,18)
-- RVECENT(romReserved,19)
-- RVECENT(romReserved,20)
-- RVECENT(romReserved,21)
-- RVECENT(romReserved,22)
-- RVECENT(romReserved,23)
-- RVECENT(romReserved,24)
-- RVECENT(romReserved,25)
-- RVECENT(romReserved,26)
-- RVECENT(romReserved,27)
-- RVECENT(romReserved,28)
-- RVECENT(romReserved,29)
-- RVECENT(romReserved,30)
-- RVECENT(romReserved,31)
-- RVECENT(romReserved,32)
-- RVECENT(romReserved,33)
-- RVECENT(romReserved,34)
-- RVECENT(romReserved,35)
-- RVECENT(romReserved,36)
-- RVECENT(romReserved,37)
-- RVECENT(romReserved,38)
-- RVECENT(romReserved,39)
-- RVECENT(romReserved,40)
-- RVECENT(romReserved,41)
-- RVECENT(romReserved,42)
-- RVECENT(romReserved,43)
-- RVECENT(romReserved,44)
-- RVECENT(romReserved,45)
-- RVECENT(romReserved,46)
-- RVECENT(romReserved,47)
-- RVECENT(romReserved,48)
-- RVECENT(romReserved,49)
-- RVECENT(romReserved,50)
-- RVECENT(romReserved,51)
-- RVECENT(romReserved,52)
-- RVECENT(romReserved,53)
-- RVECENT(romReserved,54)
-- RVECENT(romReserved,55)
-- RVECENT(romReserved,56)
-- RVECENT(romReserved,57)
-- RVECENT(romReserved,58)
-- RVECENT(romReserved,59)
-- RVECENT(romReserved,60)
-- RVECENT(romReserved,61)
-- RVECENT(romReserved,62)
-- RVECENT(romReserved,63)
-- XVECENT(romExcHandle,0x200) # bfc00200: R4000 tlbmiss vector
-- RVECENT(romReserved,65)
-- RVECENT(romReserved,66)
-- RVECENT(romReserved,67)
-- RVECENT(romReserved,68)
-- RVECENT(romReserved,69)
-- RVECENT(romReserved,70)
-- RVECENT(romReserved,71)
-- RVECENT(romReserved,72)
-- RVECENT(romReserved,73)
-- RVECENT(romReserved,74)
-- RVECENT(romReserved,75)
-- RVECENT(romReserved,76)
-- RVECENT(romReserved,77)
-- RVECENT(romReserved,78)
-- RVECENT(romReserved,79)
-- XVECENT(romExcHandle,0x280) # bfc00280: R4000 xtlbmiss vector
-- RVECENT(romReserved,81)
-- RVECENT(romReserved,82)
-- RVECENT(romReserved,83)
-- RVECENT(romReserved,84)
-- RVECENT(romReserved,85)
-- RVECENT(romReserved,86)
-- RVECENT(romReserved,87)
-- RVECENT(romReserved,88)
-- RVECENT(romReserved,89)
-- RVECENT(romReserved,90)
-- RVECENT(romReserved,91)
-- RVECENT(romReserved,92)
-- RVECENT(romReserved,93)
-- RVECENT(romReserved,94)
-- RVECENT(romReserved,95)
-- XVECENT(romExcHandle,0x300) # bfc00300: R4000 cache vector
-- RVECENT(romReserved,97)
-- RVECENT(romReserved,98)
-- RVECENT(romReserved,99)
-- RVECENT(romReserved,100)
-- RVECENT(romReserved,101)
-- RVECENT(romReserved,102)
-- RVECENT(romReserved,103)
-- RVECENT(romReserved,104)
-- RVECENT(romReserved,105)
-- RVECENT(romReserved,106)
-- RVECENT(romReserved,107)
-- RVECENT(romReserved,108)
-- RVECENT(romReserved,109)
-- RVECENT(romReserved,110)
-- RVECENT(romReserved,111)
-- XVECENT(romExcHandle,0x380) # bfc00380: R4000 general vector
-- RVECENT(romReserved,113)
-- RVECENT(romReserved,114)
-- RVECENT(romReserved,115)
-- RVECENT(romReserved,116)
-- RVECENT(romReserved,116)
-- RVECENT(romReserved,118)
-- RVECENT(romReserved,119)
-- RVECENT(romReserved,120)
-- RVECENT(romReserved,121)
-- RVECENT(romReserved,122)
-- RVECENT(romReserved,123)
-- RVECENT(romReserved,124)
-- RVECENT(romReserved,125)
-- RVECENT(romReserved,126)
-- RVECENT(romReserved,127)
-+ .word 0
-+ .set pop
-+ .endm
-+
-+ .macro reset_vector branch
-+ .set push
-+ .set noreorder
-+ b \branch
-+ nop
-+ .set pop
-+ .endm
-+
-+ .macro exception_vector offset branch
-+ .set push
-+ .set noreorder
-+ .org \offset
-+ b \branch
-+ li k0, \offset
-+ .set pop
-+ .endm
-+
-+ .set noreorder
-+
-+ .globl _start
-+ .text
-+_start:
-+ reset_vector reset # U-boot entry point
-+ reset_vector reset # software reboot
-+
-+ lantiq_soc_bootcfg # Lantiq SoC Boot config word
-+
-+ exception_vector 0x200, halt # TLB miss
-+ exception_vector 0x280, halt # XTLB miss
-+ exception_vector 0x300, halt # Cache error
-+ exception_vector 0x380, halt # General
-+ exception_vector 0x400, halt # Interrupt, CauseIV
-+ exception_vector 0x480, ejtag_exception # EJTAG debug
-
-- /*
-- * We hope there are no more reserved vectors!
-- * 128 * 8 == 1024 == 0x400
-- * so this is address R_VEC+0x400 == 0xbfc00400
-- */
- .align 4
- reset:
--
- /* Clear watch registers */
- mtc0 zero, CP0_WATCHLO
- mtc0 zero, CP0_WATCHHI
-@@ -222,13 +119,15 @@ reset:
- /* WP(Watch Pending), SW0/1 should be cleared */
- mtc0 zero, CP0_CAUSE
-
-+#if 0
- setup_c0_status_reset
-+#endif
-
- /* Init Timer */
+@@ -105,7 +105,7 @@ reset:
mtc0 zero, CP0_COUNT
mtc0 zero, CP0_COMPARE
@@ -2037,41 +1867,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
/* CONFIG0 register */
li t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
-@@ -323,6 +222,8 @@ relocate_code:
- jalr t9
- nop
-
-+ sync
-+
- /* Jump to where we've relocated ourselves */
- addi t0, s2, in_ram - _start
- jr t0
-@@ -378,8 +279,12 @@ in_ram:
- .end relocate_code
-
- /* Exception handlers */
--romReserved:
-- b romReserved
-+ejtag_exception:
-+ /* Set DEPC to halt and exit debug mode */
-+ la k1, halt
-+ mtc0 k1, CP0_DEPC
-+ deret
-+ nop
-
--romExcHandle:
-- b romExcHandle
-+halt:
-+ b halt
+diff --git a/arch/mips/cpu/mips32/vrx200/Makefile b/arch/mips/cpu/mips32/vrx200/Makefile
+new file mode 100644
+index 0000000..714dc69
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/Makefile
-@@ -0,0 +1,34 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,32 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -2100,15 +1905,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/arch/mips/cpu/mips32/vrx200/cgu.c b/arch/mips/cpu/mips32/vrx200/cgu.c
+new file mode 100644
+index 0000000..799c902
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/cgu.c
-@@ -0,0 +1,209 @@
+@@ -0,0 +1,208 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2312,15 +2119,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ ltq_cgu_pll1_init();
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/cgu_init.S b/arch/mips/cpu/mips32/vrx200/cgu_init.S
+new file mode 100644
+index 0000000..190ef89
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/cgu_init.S
-@@ -0,0 +1,120 @@
+@@ -0,0 +1,119 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
@@ -2435,14 +2244,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ nop
+
+ END(ltq_cgu_init)
+diff --git a/arch/mips/cpu/mips32/vrx200/chipid.c b/arch/mips/cpu/mips32/vrx200/chipid.c
+new file mode 100644
+index 0000000..f916e87
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/chipid.c
-@@ -0,0 +1,63 @@
+@@ -0,0 +1,62 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2501,14 +2312,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return "";
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/config.mk b/arch/mips/cpu/mips32/vrx200/config.mk
+new file mode 100644
+index 0000000..442156a
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/config.mk
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,30 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PF_CPPFLAGS_XRX := $(call cc-option,-mtune=34kc,)
@@ -2517,6 +2330,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ifdef CONFIG_SPL_BUILD
+PF_ABICALLS := -mno-abicalls
+PF_PIC := -fno-pic
++PF_PIE :=
+USE_PRIVATE_LIBGCC := yes
+endif
+
@@ -2534,17 +2348,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
+endif
+endif
-+
-+LDSCRIPT := $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot.lds
+diff --git a/arch/mips/cpu/mips32/vrx200/dcdc.c b/arch/mips/cpu/mips32/vrx200/dcdc.c
+new file mode 100644
+index 0000000..11ca0d7
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/dcdc.c
-@@ -0,0 +1,107 @@
+@@ -0,0 +1,106 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2646,14 +2460,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ __udelay(1000);
+ }
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/ebu.c b/arch/mips/cpu/mips32/vrx200/ebu.c
+new file mode 100644
+index 0000000..4ab3cf1
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/ebu.c
-@@ -0,0 +1,112 @@
+@@ -0,0 +1,111 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2761,14 +2577,32 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ return (void *)(addr ^ 2);
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/fw_phy11g_a1x.blob b/arch/mips/cpu/mips32/vrx200/fw_phy11g_a1x.blob
+new file mode 100644
+index 0000000..cdf3d30
+Binary files /dev/null and b/arch/mips/cpu/mips32/vrx200/fw_phy11g_a1x.blob differ
+diff --git a/arch/mips/cpu/mips32/vrx200/fw_phy11g_a2x.blob b/arch/mips/cpu/mips32/vrx200/fw_phy11g_a2x.blob
+new file mode 100644
+index 0000000..1559081
+Binary files /dev/null and b/arch/mips/cpu/mips32/vrx200/fw_phy11g_a2x.blob differ
+diff --git a/arch/mips/cpu/mips32/vrx200/fw_phy22f_a1x.blob b/arch/mips/cpu/mips32/vrx200/fw_phy22f_a1x.blob
+new file mode 100644
+index 0000000..02b88a0
+Binary files /dev/null and b/arch/mips/cpu/mips32/vrx200/fw_phy22f_a1x.blob differ
+diff --git a/arch/mips/cpu/mips32/vrx200/fw_phy22f_a2x.blob b/arch/mips/cpu/mips32/vrx200/fw_phy22f_a2x.blob
+new file mode 100644
+index 0000000..eeab2ab
+Binary files /dev/null and b/arch/mips/cpu/mips32/vrx200/fw_phy22f_a2x.blob differ
+diff --git a/arch/mips/cpu/mips32/vrx200/gphy.c b/arch/mips/cpu/mips32/vrx200/gphy.c
+new file mode 100644
+index 0000000..269ca5d
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/gphy.c
-@@ -0,0 +1,59 @@
+@@ -0,0 +1,58 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2823,45 +2657,49 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ ltq_gphy_copy(&__ltq_fw_phy22f_a2x_start, &__ltq_fw_phy22f_a2x_end,
+ addr);
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/gphy_fw.S b/arch/mips/cpu/mips32/vrx200/gphy_fw.S
+new file mode 100644
+index 0000000..3a0417a
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/gphy_fw.S
-@@ -0,0 +1,28 @@
+@@ -0,0 +1,27 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/asm.h>
+
+ .section .rodata.__ltq_fw_phy11g_a1x
+EXPORT(__ltq_fw_phy11g_a1x_start)
-+ .incbin "fw_phy11g_a1x.bin"
++ .incbin "fw_phy11g_a1x.blob"
+EXPORT(__ltq_fw_phy11g_a1x_end)
+
+ .section .rodata.__ltq_fw_phy11g_a2x
+EXPORT(__ltq_fw_phy11g_a2x_start)
-+ .incbin "fw_phy11g_a2x.bin"
++ .incbin "fw_phy11g_a2x.blob"
+EXPORT(__ltq_fw_phy11g_a2x_end)
+
+ .section .rodata.__ltq_fw_phy22f_a1x
+EXPORT(__ltq_fw_phy22f_a1x_start)
-+ .incbin "fw_phy22f_a1x.bin"
++ .incbin "fw_phy22f_a1x.blob"
+EXPORT(__ltq_fw_phy22f_a1x_end)
+
+ .section .rodata.__ltq_fw_phy22f_a2x
+EXPORT(__ltq_fw_phy22f_a2x_start)
-+ .incbin "fw_phy22f_a2x.bin"
++ .incbin "fw_phy22f_a2x.blob"
+EXPORT(__ltq_fw_phy22f_a2x_end)
+diff --git a/arch/mips/cpu/mips32/vrx200/mem.c b/arch/mips/cpu/mips32/vrx200/mem.c
+new file mode 100644
+index 0000000..c3e14ab
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/mem.c
-@@ -0,0 +1,58 @@
+@@ -0,0 +1,57 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -2915,15 +2753,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return size;
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/mem_init.S b/arch/mips/cpu/mips32/vrx200/mem_init.S
+new file mode 100644
+index 0000000..a296845
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/mem_init.S
-@@ -0,0 +1,234 @@
+@@ -0,0 +1,233 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
@@ -3152,14 +2992,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ jr ra
+
+ END(ltq_mem_init)
+diff --git a/arch/mips/cpu/mips32/vrx200/pmu.c b/arch/mips/cpu/mips32/vrx200/pmu.c
+new file mode 100644
+index 0000000..a144473
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/pmu.c
-@@ -0,0 +1,131 @@
+@@ -0,0 +1,130 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -3286,14 +3128,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ ltq_clrsetbits(&ltq_pmu_regs->pwdcr, clr, set);
+}
+diff --git a/arch/mips/cpu/mips32/vrx200/rcu.c b/arch/mips/cpu/mips32/vrx200/rcu.c
+new file mode 100644
+index 0000000..763f287
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/rcu.c
-@@ -0,0 +1,195 @@
+@@ -0,0 +1,194 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -3484,87 +3328,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ /* Start GPHY by releasing reset */
+ ltq_clrbits(&ltq_rcu_regs->req, module);
+}
---- /dev/null
-+++ b/arch/mips/cpu/mips32/vrx200/u-boot.lds
-@@ -0,0 +1,69 @@
-+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
-+ * Copyright (C) 2003 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
-+ */
-+
-+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-+OUTPUT_ARCH(mips)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text : {
-+ *(.text*)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : {
-+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-+ }
-+
-+ . = ALIGN(4);
-+ .data : {
-+ *(.data*)
-+ }
-+
-+ . = ALIGN(4);
-+ .sdata : {
-+ *(.sdata*)
-+ }
-+
-+ . = .;
-+ _gp = ALIGN(16) + 0x7ff0;
-+
-+ .got : {
-+ __got_start = .;
-+ *(.got)
-+ __got_end = .;
-+ }
-+
-+ num_got_entries = (__got_end - __got_start) >> 2;
-+
-+#ifndef CONFIG_SPL_BUILD
-+ . = ALIGN(4);
-+ .u_boot_list : {
-+ #include <u-boot.lst>
-+ }
-+#endif
-+
-+ . = ALIGN(4);
-+ __image_copy_end = .;
-+ uboot_end_data = .;
-+
-+ .bss (NOLOAD) : {
-+ __bss_start = .;
-+ *(.bss*)
-+ *(.sbss*)
-+ . = ALIGN(4);
-+ __bss_end = .;
-+ }
-+
-+ . = ALIGN(4);
-+ __end = .;
-+ uboot_end = .;
-+}
+diff --git a/arch/mips/include/asm/arch-danube/config.h b/arch/mips/include/asm/arch-danube/config.h
+new file mode 100644
+index 0000000..d84f66f
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/config.h
-@@ -0,0 +1,156 @@
+@@ -0,0 +1,163 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Common board configuration for Lantiq XWAY Danube family
+ *
@@ -3621,7 +3395,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_SYS_INIT_SP_OFFSET 0x4000
+
+/* SRAM */
-+#define CONFIG_SYS_SRAM_BASE 0xBE180000
++#define CONFIG_SYS_SRAM_BASE 0xBE1A0000
+#define CONFIG_SYS_SRAM_SIZE 0x10000
+
+/* ASC/UART driver and console */
@@ -3659,6 +3433,14 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_CMD_SPI
+#endif
+
++#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
++#define CONFIG_NAND_LANTIQ
++#define CONFIG_SYS_MAX_NAND_DEVICE 1
++#define CONFIG_SYS_NAND_BASE 0xB4000000
++
++#define CONFIG_CMD_NAND
++#endif
++
+#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
+#define CONFIG_LANTIQ_DMA
+#define CONFIG_LANTIQ_DANUBE_ETOP
@@ -3715,14 +3497,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#endif /* __DANUBE_CONFIG_H__ */
+diff --git a/arch/mips/include/asm/arch-danube/gpio.h b/arch/mips/include/asm/arch-danube/gpio.h
+new file mode 100644
+index 0000000..70eb086
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/gpio.h
-@@ -0,0 +1,13 @@
+@@ -0,0 +1,12 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DANUBE_GPIO_H__
@@ -3731,15 +3515,36 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#include <asm/lantiq/gpio.h>
+
+#endif /* __DANUBE_GPIO_H__ */
+diff --git a/arch/mips/include/asm/arch-danube/nand.h b/arch/mips/include/asm/arch-danube/nand.h
+new file mode 100644
+index 0000000..c7a573a
--- /dev/null
-+++ b/arch/mips/include/asm/arch-danube/soc.h
-@@ -0,0 +1,40 @@
++++ b/arch/mips/include/asm/arch-danube/nand.h
+@@ -0,0 +1,13 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __DANUBE_NAND_H__
++#define __DANUBE_NAND_H__
++
++struct nand_chip;
++int ltq_nand_init(struct nand_chip *nand);
++
++#endif /* __DANUBE_NAND_H__ */
+diff --git a/arch/mips/include/asm/arch-danube/soc.h b/arch/mips/include/asm/arch-danube/soc.h
+new file mode 100644
+index 0000000..47ef62a
+--- /dev/null
++++ b/arch/mips/include/asm/arch-danube/soc.h
+@@ -0,0 +1,38 @@
++/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DANUBE_SOC_H__
@@ -3754,9 +3559,8 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+#define LTQ_EBU_BASE 0x1E105300
+#define LTQ_EBU_REGION0_BASE 0x10000000
-+#define LTQ_EBU_REGION0_SIZE (64 * 1024 * 1024)
+#define LTQ_EBU_REGION1_BASE 0x14000000
-+#define LTQ_EBU_REGION1_SIZE (32 * 1024 * 1024)
++#define LTQ_EBU_NAND_BASE (LTQ_EBU_BASE + 0xB0)
+
+#define LTQ_PPE_BASE 0x1E180000
+#define LTQ_PPE_ETOP_BASE (LTQ_PPE_BASE + 0x11800)
@@ -3774,15 +3578,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define LTQ_MC_DDR_DC_OFFSET(x) (x * 0x10)
+
+#endif /* __DANUBE_SOC_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/config.h b/arch/mips/include/asm/arch-vrx200/config.h
+new file mode 100644
+index 0000000..88ef256
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/config.h
-@@ -0,0 +1,185 @@
+@@ -0,0 +1,184 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Common board configuration for Lantiq XWAY VRX200 family
+ *
@@ -3795,13 +3601,13 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * CONFIG_LTQ_SUPPORT_NOR_FLASH
+ * - support a parallel NOR flash via the CFI interface in flash bank 0
+ *
++ * CONFIG_LTQ_SUPPORT_ETHERNET
++ * - support the VRX200 internal switch
++ *
+ * CONFIG_LTQ_SUPPORT_SPI_FLASH
+ * - support the VRX200 SPI interface and serial flash drivers
+ * - specific SPI flash drivers must be configured separately
+ *
-+ * CONFIG_LTQ_SUPPORT_ETHERNET
-+ * - support the VRX200 internal switch
-+ *
+ * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH
+ * - build a preloader that runs in the internal SRAM and loads
+ * the U-Boot from SPI flash into RAM
@@ -3962,14 +3768,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#endif /* __VRX200_CONFIG_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/gphy.h b/arch/mips/include/asm/arch-vrx200/gphy.h
+new file mode 100644
+index 0000000..6cdb268
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/gphy.h
-@@ -0,0 +1,66 @@
+@@ -0,0 +1,65 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_GPHY_H__
@@ -4031,14 +3839,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+extern void ltq_rcu_gphy_boot(unsigned int id, ulong addr);
+
+#endif /* __VRX200_GPHY_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/gpio.h b/arch/mips/include/asm/arch-vrx200/gpio.h
+new file mode 100644
+index 0000000..b8d7676
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/gpio.h
-@@ -0,0 +1,13 @@
+@@ -0,0 +1,12 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_GPIO_H__
@@ -4047,14 +3857,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#include <asm/lantiq/gpio.h>
+
+#endif /* __VRX200_GPIO_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/nand.h b/arch/mips/include/asm/arch-vrx200/nand.h
+new file mode 100644
+index 0000000..231b68f
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/nand.h
-@@ -0,0 +1,14 @@
+@@ -0,0 +1,13 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_NAND_H__
@@ -4064,15 +3876,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+int ltq_nand_init(struct nand_chip *nand);
+
+#endif /* __VRX200_NAND_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/soc.h b/arch/mips/include/asm/arch-vrx200/soc.h
+new file mode 100644
+index 0000000..fae5906
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/soc.h
-@@ -0,0 +1,46 @@
+@@ -0,0 +1,45 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_SOC_H__
@@ -4113,29 +3927,20 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define LTQ_MC_DDR_CCR_OFFSET(x) (x * 0x10)
+
+#endif /* __VRX200_SOC_H__ */
+diff --git a/arch/mips/include/asm/arch-vrx200/switch.h b/arch/mips/include/asm/arch-vrx200/switch.h
+new file mode 100644
+index 0000000..e505099
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/switch.h
-@@ -0,0 +1,514 @@
+@@ -0,0 +1,502 @@
+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
-+#ifndef __VR9_SWITCH_H__
-+#define __VR9_SWITCH_H__
++#ifndef __VRX200_SWITCH_H__
++#define __VRX200_SWITCH_H__
+
+/* Switch core registers */
+struct vr9_switch_core_regs {
@@ -4629,7 +4434,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MDIO_CTRL_PHYAD_MASK (0x1f << MDIO_CTRL_PHYAD_SHIFT)
+#define MDIO_CTRL_REGAD_MASK 0x1f
+
-+#endif
++#endif /* __VRX200_SWITCH_H__ */
+diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
+index 933ccb1..dd0ffb6 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -53,6 +53,7 @@
@@ -4650,24 +4457,28 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
symbol: .frame sp, framesize, rpc
/*
+diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h
+new file mode 100644
+index 0000000..9be58b8
--- /dev/null
+++ b/arch/mips/include/asm/gpio.h
-@@ -0,0 +1,7 @@
+@@ -0,0 +1,6 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/gpio.h>
+#include <asm-generic/gpio.h>
+diff --git a/arch/mips/include/asm/lantiq/chipid.h b/arch/mips/include/asm/lantiq/chipid.h
+new file mode 100644
+index 0000000..c9921b0
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/chipid.h
-@@ -0,0 +1,74 @@
+@@ -0,0 +1,73 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CHIPID_H__
@@ -4737,17 +4548,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#endif
+
+#endif /* __LANTIQ_CHIPID_H__ */
+diff --git a/arch/mips/include/asm/lantiq/clk.h b/arch/mips/include/asm/lantiq/clk.h
+new file mode 100644
+index 0000000..e13f000
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/clk.h
-@@ -0,0 +1,33 @@
+@@ -0,0 +1,30 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
-+ *
-+ * Based on Lantiq port in Linux kernel
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CLK_H__
@@ -4773,15 +4584,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+extern unsigned long ltq_get_io_region_clock(void);
+
+#endif /* __LANTIQ_CLK_H__ */
+diff --git a/arch/mips/include/asm/lantiq/config.h b/arch/mips/include/asm/lantiq/config.h
+new file mode 100644
+index 0000000..feac30d
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/config.h
-@@ -0,0 +1,166 @@
+@@ -0,0 +1,164 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CONFIG_H__
@@ -4816,6 +4629,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_SPL
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
++#define CONFIG_SPI_SPL_SIMPLE
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH) && defined(CONFIG_SYS_BOOT_NORSPL)
@@ -4855,11 +4669,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
-+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+
+/* Other U-Boot settings */
-+#define CONFIG_UBOOT_VERSION
+#define CONFIG_TIMESTAMP
+
+/* Default environment */
@@ -4942,14 +4754,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ CONFIG_ENV_LOAD_UBOOT_SF
+
+#endif /* __LANTIQ_CONFIG_H__ */
+diff --git a/arch/mips/include/asm/lantiq/cpu.h b/arch/mips/include/asm/lantiq/cpu.h
+new file mode 100644
+index 0000000..b3a504e
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/cpu.h
-@@ -0,0 +1,35 @@
+@@ -0,0 +1,34 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CPU_H__
@@ -4980,14 +4794,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+void ltq_dcdc_init(unsigned int dig_ref);
+
+#endif /* __LANTIQ_CPU_H__ */
+diff --git a/arch/mips/include/asm/lantiq/dma.h b/arch/mips/include/asm/lantiq/dma.h
+new file mode 100644
+index 0000000..15a29c9
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/dma.h
-@@ -0,0 +1,95 @@
+@@ -0,0 +1,94 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_DMA_H__
@@ -5078,14 +4894,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ unsigned long timeout);
+
+#endif /* __LANTIQ_DMA_H__ */
+diff --git a/arch/mips/include/asm/lantiq/eth.h b/arch/mips/include/asm/lantiq/eth.h
+new file mode 100644
+index 0000000..d09e9cf
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/eth.h
-@@ -0,0 +1,36 @@
+@@ -0,0 +1,35 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_ETH_H__
@@ -5117,14 +4935,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+extern int ltq_eth_initialize(const struct ltq_eth_board_config *board_config);
+
+#endif /* __LANTIQ_ETH_H__ */
+diff --git a/arch/mips/include/asm/lantiq/gpio.h b/arch/mips/include/asm/lantiq/gpio.h
+new file mode 100644
+index 0000000..66e227f
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/gpio.h
-@@ -0,0 +1,51 @@
+@@ -0,0 +1,50 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_GPIO_H__
@@ -5171,15 +4991,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#include <asm-generic/gpio.h>
+
+#endif /* __LANTIQ_GPIO_H__ */
+diff --git a/arch/mips/include/asm/lantiq/io.h b/arch/mips/include/asm/lantiq/io.h
+new file mode 100644
+index 0000000..5ac7696
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/io.h
-@@ -0,0 +1,38 @@
+@@ -0,0 +1,37 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_IO_H__
@@ -5212,14 +5034,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+}
+
+#endif /* __LANTIQ_IO_H__ */
+diff --git a/arch/mips/include/asm/lantiq/pm.h b/arch/mips/include/asm/lantiq/pm.h
+new file mode 100644
+index 0000000..9db7117
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/pm.h
-@@ -0,0 +1,22 @@
+@@ -0,0 +1,21 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_PM_H__
@@ -5237,14 +5061,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+int ltq_pm_disable(enum ltq_pm_modules module);
+
+#endif /* __LANTIQ_PM_H__ */
+diff --git a/arch/mips/include/asm/lantiq/reset.h b/arch/mips/include/asm/lantiq/reset.h
+new file mode 100644
+index 0000000..0dbc994
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/reset.h
-@@ -0,0 +1,38 @@
+@@ -0,0 +1,37 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_RESET_H__
@@ -5278,6 +5104,8 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+}
+
+#endif /* __LANTIQ_RESET_H__ */
+diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
+index be7e5c6..b3bc255 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -46,7 +46,10 @@
@@ -5342,16 +5170,20 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Bits in the coprocessor 0 config register.
*/
/* Generic bits. */
+diff --git a/arch/mips/include/asm/u-boot-mips.h b/arch/mips/include/asm/u-boot-mips.h
+index 9f3cce9..30fb469 100644
--- a/arch/mips/include/asm/u-boot-mips.h
+++ b/arch/mips/include/asm/u-boot-mips.h
-@@ -9,3 +9,4 @@ extern ulong uboot_end_data;
- extern ulong uboot_end;
+@@ -23,3 +23,4 @@ static inline unsigned long image_copy_end(void)
+ }
extern int incaip_set_cpuclk(void);
+extern int arch_cpu_init(void);
+diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
+index 9e6ba15..daa0182 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
-@@ -50,6 +50,16 @@ static char *failed = "*** failed ***\n"
+@@ -33,6 +33,16 @@ static char *failed = "*** failed ***\n";
*/
const unsigned long mips_io_port_base = -1;
@@ -5368,7 +5200,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
int __board_early_init_f(void)
{
/*
-@@ -123,6 +133,7 @@ static int init_baudrate(void)
+@@ -106,6 +116,7 @@ static int init_baudrate(void)
typedef int (init_fnc_t)(void);
init_fnc_t *init_sequence[] = {
@@ -5376,15 +5208,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
board_early_init_f,
timer_init,
env_init, /* initialize environment */
+diff --git a/board/lantiq/easy50712/Makefile b/board/lantiq/easy50712/Makefile
+new file mode 100644
+index 0000000..3a547c2
--- /dev/null
+++ b/board/lantiq/easy50712/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -5408,26 +5241,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/lantiq/easy50712/config.mk b/board/lantiq/easy50712/config.mk
+new file mode 100644
+index 0000000..9d8953b
--- /dev/null
+++ b/board/lantiq/easy50712/config.mk
-@@ -0,0 +1,8 @@
+@@ -0,0 +1,7 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/lantiq/easy50712/ddr_settings.h b/board/lantiq/easy50712/ddr_settings.h
+new file mode 100644
+index 0000000..36a4118
--- /dev/null
+++ b/board/lantiq/easy50712/ddr_settings.h
-@@ -0,0 +1,55 @@
+@@ -0,0 +1,54 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
@@ -5477,15 +5314,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
+diff --git a/board/lantiq/easy50712/easy50712.c b/board/lantiq/easy50712/easy50712.c
+new file mode 100644
+index 0000000..4f6a237
--- /dev/null
+++ b/board/lantiq/easy50712/easy50712.c
-@@ -0,0 +1,106 @@
+@@ -0,0 +1,112 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -5501,6 +5340,13 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ /* SPI/CS output (low-active) for serial flash */
+ gpio_direction_output(22, 1);
+
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++
+ /* enable CLK_OUT2 for external switch */
+ gpio_set_altfunc(3, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
@@ -5586,15 +5432,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ break;
+ }
+}
+diff --git a/board/lantiq/easy80920/Makefile b/board/lantiq/easy80920/Makefile
+new file mode 100644
+index 0000000..3a547c2
--- /dev/null
+++ b/board/lantiq/easy80920/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -5618,26 +5465,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/lantiq/easy80920/config.mk b/board/lantiq/easy80920/config.mk
+new file mode 100644
+index 0000000..9d8953b
--- /dev/null
+++ b/board/lantiq/easy80920/config.mk
-@@ -0,0 +1,8 @@
+@@ -0,0 +1,7 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/lantiq/easy80920/ddr_settings.h b/board/lantiq/easy80920/ddr_settings.h
+new file mode 100644
+index 0000000..671d1c1
--- /dev/null
+++ b/board/lantiq/easy80920/ddr_settings.h
-@@ -0,0 +1,70 @@
+@@ -0,0 +1,69 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_CCR00_VALUE 0x101
@@ -5702,14 +5553,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_CCR59_VALUE 0x7800301
+#define MC_CCR60_VALUE 0x7800301
+#define MC_CCR61_VALUE 0x4
+diff --git a/board/lantiq/easy80920/easy80920.c b/board/lantiq/easy80920/easy80920.c
+new file mode 100644
+index 0000000..d9a4f81
--- /dev/null
+++ b/board/lantiq/easy80920/easy80920.c
-@@ -0,0 +1,139 @@
+@@ -0,0 +1,138 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -5844,29 +5697,33 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ break;
+ }
+}
+diff --git a/boards.cfg b/boards.cfg
+index aa2ee64..f090726 100644
--- a/boards.cfg
+++ b/boards.cfg
-@@ -444,10 +444,17 @@ dbau1500 mips
- dbau1550 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550
- dbau1550_el mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN
- pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000
-+easy50712_nor mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_NOR
-+easy50712_norspl mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_NORSPL
-+easy50712_ram mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_RAM
- incaip mips mips32 incaip - incaip
- incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000
- incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000
- incaip_150MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=150000000
-+easy80920_nor mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_NOR
-+easy80920_norspl mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_NORSPL
-+easy80920_ram mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_RAM
-+easy80920_sfspl mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_SFSPL
- qi_lb60 mips xburst qi_lb60 qi
- adp-ag101 nds32 n1213 adp-ag101 AndesTech ag101
- adp-ag101p nds32 n1213 adp-ag101p AndesTech ag101
+@@ -502,10 +502,17 @@ Active mips mips32 au1x00 - dbau1x00
+ Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
++Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
+ Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
+ Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index a6132e2..5a4bcef 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
-@@ -28,6 +28,7 @@ LIB := $(obj)libdma.o
+@@ -12,6 +12,7 @@ LIB := $(obj)libdma.o
COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
COBJS-$(CONFIG_APBH_DMA) += apbh_dma.o
COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o
@@ -5874,14 +5731,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS-$(CONFIG_OMAP3_DMA) += omap3_dma.o
COBJS := $(COBJS-y)
+diff --git a/drivers/dma/lantiq_dma.c b/drivers/dma/lantiq_dma.c
+new file mode 100644
+index 0000000..a78212a
--- /dev/null
+++ b/drivers/dma/lantiq_dma.c
-@@ -0,0 +1,388 @@
+@@ -0,0 +1,387 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -6265,9 +6124,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return 0;
+}
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 71ddb00..5fb505b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -28,6 +28,7 @@ LIB := $(obj)libgpio.o
+@@ -12,6 +12,7 @@ LIB := $(obj)libgpio.o
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
@@ -6275,14 +6136,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS-$(CONFIG_MARVELL_GPIO) += mvgpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
+diff --git a/drivers/gpio/lantiq_gpio.c b/drivers/gpio/lantiq_gpio.c
+new file mode 100644
+index 0000000..374a668
--- /dev/null
+++ b/drivers/gpio/lantiq_gpio.c
-@@ -0,0 +1,330 @@
+@@ -0,0 +1,329 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -6608,9 +6471,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return 0;
+}
+diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
+index a389cd1..fa4fae7 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
-@@ -177,6 +177,18 @@ u64 flash_read64(void *addr)__attribute_
+@@ -161,6 +161,18 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
#define flash_read64 __flash_read64
#endif
@@ -6629,7 +6494,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
/*-----------------------------------------------------------------------
*/
#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
-@@ -212,7 +224,7 @@ flash_map (flash_info_t * info, flash_se
+@@ -196,7 +208,7 @@ flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
unsigned int byte_offset = offset * info->portwidth;
@@ -6638,9 +6503,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 366dee6..e9adaaa 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -67,6 +67,7 @@ COBJS-$(CONFIG_NAND_JZ4740) += jz4740_na
+@@ -53,6 +53,7 @@ COBJS-$(CONFIG_NAND_JZ4740) += jz4740_nand.o
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
@@ -6648,14 +6515,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
+diff --git a/drivers/mtd/nand/lantiq_nand.c b/drivers/mtd/nand/lantiq_nand.c
+new file mode 100644
+index 0000000..85f8f68
--- /dev/null
+++ b/drivers/mtd/nand/lantiq_nand.c
-@@ -0,0 +1,127 @@
+@@ -0,0 +1,126 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -6778,25 +6647,29 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ return ltq_nand_init(chip);
+}
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 18fd54f..bbc2c92 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
-@@ -51,6 +51,8 @@ COBJS-$(CONFIG_GRETH) += greth.o
- COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
+@@ -37,6 +37,8 @@ COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
+ COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o
COBJS-$(CONFIG_LAN91C96) += lan91c96.o
+COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o
+COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
+diff --git a/drivers/net/lantiq_danube_etop.c b/drivers/net/lantiq_danube_etop.c
+new file mode 100644
+index 0000000..7453882
--- /dev/null
+++ b/drivers/net/lantiq_danube_etop.c
-@@ -0,0 +1,411 @@
+@@ -0,0 +1,410 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -7203,15 +7076,17 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return 0;
+}
+diff --git a/drivers/net/lantiq_vrx200_switch.c b/drivers/net/lantiq_vrx200_switch.c
+new file mode 100644
+index 0000000..174427d
--- /dev/null
+++ b/drivers/net/lantiq_vrx200_switch.c
-@@ -0,0 +1,676 @@
+@@ -0,0 +1,675 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010-2011 Lantiq Deutschland GmbH
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define DEBUG
@@ -7456,7 +7331,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ return packet + LTQ_ETH_IP_ALIGN;
+}
+
-+static int ltq_eth_init(struct eth_device *dev, bd_t * bis)
++static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
@@ -7882,24 +7757,28 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return 0;
+}
+diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
+index fe762e9..9eb08b8 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
-@@ -34,6 +34,7 @@ COBJS-$(CONFIG_PHYLIB_10G) += generic_10
- COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o
- COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o
+@@ -20,6 +20,7 @@ COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o
COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o
+ COBJS-$(CONFIG_PHY_ET1011C) += et1011c.o
+ COBJS-$(CONFIG_PHY_ICPLUS) += icplus.o
+COBJS-$(CONFIG_PHY_LANTIQ) += lantiq.o
COBJS-$(CONFIG_PHY_LXT) += lxt.o
COBJS-$(CONFIG_PHY_MARVELL) += marvell.o
COBJS-$(CONFIG_PHY_MICREL) += micrel.o
+diff --git a/drivers/net/phy/lantiq.c b/drivers/net/phy/lantiq.c
+new file mode 100644
+index 0000000..572c8c3
--- /dev/null
+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,239 @@
+@@ -0,0 +1,238 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define DEBUG
@@ -8134,18 +8013,23 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return 0;
+}
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 62925bb..dfbe108 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -32,6 +32,8 @@
+@@ -16,9 +16,10 @@
+ #include <command.h>
+ #include <miiphy.h>
#include <phy.h>
- #include <errno.h>
+-#include <errno.h>
+ #include <linux/err.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Generic PHY support and helper functions */
/**
-@@ -420,6 +422,16 @@ static LIST_HEAD(phy_drivers);
+@@ -440,6 +441,16 @@ static LIST_HEAD(phy_drivers);
int phy_init(void)
{
@@ -8162,9 +8046,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#ifdef CONFIG_PHY_ATHEROS
phy_atheros_init();
#endif
-@@ -429,6 +441,9 @@ int phy_init(void)
- #ifdef CONFIG_PHY_DAVICOM
- phy_davicom_init();
+@@ -455,6 +466,9 @@ int phy_init(void)
+ #ifdef CONFIG_PHY_ICPLUS
+ phy_icplus_init();
#endif
+#ifdef CONFIG_PHY_LANTIQ
+ phy_lantiq_init();
@@ -8172,9 +8056,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
#ifdef CONFIG_PHY_LXT
phy_lxt_init();
#endif
+diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
+index e1fd7a5..3247b82 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
-@@ -42,6 +42,7 @@ COBJS-$(CONFIG_SYS_NS16550_SERIAL) += se
+@@ -24,6 +24,7 @@ COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
@@ -8182,15 +8068,37 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
+diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
+index df2b84a..b955f30 100644
+--- a/drivers/serial/serial.c
++++ b/drivers/serial/serial.c
+@@ -160,6 +160,7 @@ serial_initfunc(sa1100_serial_initialize);
+ serial_initfunc(sh_serial_initialize);
+ serial_initfunc(arm_dcc_initialize);
+ serial_initfunc(mxs_auart_initialize);
++serial_initfunc(ltq_serial_initialize);
+
+ /**
+ * serial_register() - Register serial driver with serial driver core
+@@ -253,6 +254,7 @@ void serial_initialize(void)
+ sh_serial_initialize();
+ arm_dcc_initialize();
+ mxs_auart_initialize();
++ ltq_serial_initialize();
+
+ serial_assign(default_serial_console()->name);
+ }
+diff --git a/drivers/serial/serial_lantiq.c b/drivers/serial/serial_lantiq.c
+new file mode 100644
+index 0000000..07b2f9d
--- /dev/null
+++ b/drivers/serial/serial_lantiq.c
-@@ -0,0 +1,264 @@
+@@ -0,0 +1,263 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -8430,7 +8338,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+}
+
+static struct serial_device ltq_serial_drv = {
-+ .name = "ixp_serial",
++ .name = "ltq_serial",
+ .start = ltq_serial_init,
+ .stop = NULL,
+ .setbrg = ltq_serial_setbrg,
@@ -8440,7 +8348,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ .tstc = ltq_serial_tstc,
+};
+
-+void ixp_serial_initialize(void)
++void ltq_serial_initialize(void)
+{
+ serial_register(&ltq_serial_drv);
+}
@@ -8449,24 +8357,28 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ return &ltq_serial_drv;
+}
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index e5941b0..f831ea1 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -36,6 +36,7 @@ COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o
- COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
+@@ -25,6 +25,7 @@ COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
+ COBJS-$(CONFIG_ICH_SPI) += ich.o
COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
+COBJS-$(CONFIG_LANTIQ_SPI) += lantiq_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+diff --git a/drivers/spi/lantiq_spi.c b/drivers/spi/lantiq_spi.c
+new file mode 100644
+index 0000000..b327878
--- /dev/null
+++ b/drivers/spi/lantiq_spi.c
-@@ -0,0 +1,476 @@
+@@ -0,0 +1,666 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -8492,6 +8404,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define LTQ_SPI_CON_ENBV (1 << 22)
+#define LTQ_SPI_CON_BM_SHIFT 16
+#define LTQ_SPI_CON_BM_MASK (0x1F << LTQ_SPI_CON_BM_SHIFT)
++#define LTQ_SPI_CON_IDLE (1 << 23)
++#define LTQ_SPI_CON_RUEN (1 << 12)
++#define LTQ_SPI_CON_AEN (1 << 10)
++#define LTQ_SPI_CON_REN (1 << 9)
++#define LTQ_SPI_CON_TEN (1 << 8)
+#define LTQ_SPI_CON_LB (1 << 7)
+#define LTQ_SPI_CON_PO (1 << 6)
+#define LTQ_SPI_CON_PH (1 << 5)
@@ -8507,6 +8424,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define LTQ_SPI_WHBSTATE_CLRMS (1 << 2)
+#define LTQ_SPI_WHBSTATE_SETEN (1 << 1)
+#define LTQ_SPI_WHBSTATE_CLREN 1
++#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
+
+#define LTQ_SPI_TXFCON_TXFLU (1 << 1)
+#define LTQ_SPI_TXFCON_TXFEN 1
@@ -8526,55 +8444,60 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define LTQ_SPI_GPIO_CLK 18
+
+struct ltq_spi_regs {
-+ u32 clc; /* Clock control */
-+ u32 pisel; /* Port input select */
-+ u32 id; /* Identification */
-+ u32 rsvd0;
-+ u32 con; /* Control */
-+ u32 stat; /* Status */
-+ u32 whbstate; /* Write HW modified state */
-+ u32 rsvd1;
-+ u32 tb; /* Transmit buffer */
-+ u32 rb; /* Receive buffer */
-+ u32 rsvd2[2];
-+ u32 rxfcon; /* Recevie FIFO control */
-+ u32 txfcon; /* Transmit FIFO control */
-+ u32 fstat; /* FIFO status */
-+ u32 rsvd3;
-+ u32 brt; /* Baudrate timer */
-+ u32 brstat; /* Baudrate timer status */
-+ u32 rsvd4[6];
-+ u32 sfcon; /* Serial frame control */
-+ u32 sfstat; /* Serial frame status */
-+ u32 rsvd5[2];
-+ u32 gpocon; /* General purpose output control */
-+ u32 gpostat; /* General purpose output status */
-+ u32 fgpo; /* Force general purpose output */
-+ u32 rsvd6;
-+ u32 rxreq; /* Receive request */
-+ u32 rxcnt; /* Receive count */
-+ u32 rsvd7[25];
-+ u32 dmacon; /* DMA control */
++ __be32 clc; /* Clock control */
++ __be32 pisel; /* Port input select */
++ __be32 id; /* Identification */
++ __be32 rsvd0;
++ __be32 con; /* Control */
++ __be32 stat; /* Status */
++ __be32 whbstate; /* Write HW modified state */
++ __be32 rsvd1;
++ __be32 tb; /* Transmit buffer */
++ __be32 rb; /* Receive buffer */
++ __be32 rsvd2[2];
++ __be32 rxfcon; /* Recevie FIFO control */
++ __be32 txfcon; /* Transmit FIFO control */
++ __be32 fstat; /* FIFO status */
++ __be32 rsvd3;
++ __be32 brt; /* Baudrate timer */
++ __be32 brstat; /* Baudrate timer status */
++ __be32 rsvd4[6];
++ __be32 sfcon; /* Serial frame control */
++ __be32 sfstat; /* Serial frame status */
++ __be32 rsvd5[2];
++ __be32 gpocon; /* General purpose output control */
++ __be32 gpostat; /* General purpose output status */
++ __be32 fgpo; /* Force general purpose output */
++ __be32 rsvd6;
++ __be32 rxreq; /* Receive request */
++ __be32 rxcnt; /* Receive count */
++ __be32 rsvd7[25];
++ __be32 dmacon; /* DMA control */
++ __be32 rsvd8;
++ __be32 irnen; /* Interrupt node enable */
++ __be32 irnicr; /* Interrupt node interrupt capture */
++ __be32 irncr; /* Interrupt node control */
+};
+
-+struct ltq_spi_slave {
++struct ltq_spi_drv_data {
++ struct ltq_spi_regs __iomem *regs;
++
+ struct spi_slave slave;
+ unsigned int max_hz;
+ unsigned int mode;
-+ unsigned int len;
-+ unsigned int brt;
-+ unsigned int tx_cnt;
-+ unsigned int rx_cnt;
++ unsigned int tx_todo;
++ unsigned int rx_todo;
+ unsigned int rx_req;
++ unsigned int bits_per_word;
++ unsigned int speed_hz;
+ const u8 *tx;
+ u8 *rx;
-+ u8 txfs;
-+ u8 rxfs;
++ int status;
+};
+
-+static inline struct ltq_spi_slave *to_ltq_spi_slave(struct spi_slave *slave)
++static struct ltq_spi_drv_data *to_ltq_spi_slave(struct spi_slave *slave)
+{
-+ return container_of(slave, struct ltq_spi_slave, slave);
++ return container_of(slave, struct ltq_spi_drv_data, slave);
+}
+
+#ifdef CONFIG_SPL_BUILD
@@ -8583,306 +8506,475 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * Neither we have to support multiple SPI slaves. Thus we put the
+ * SPI slave context in BSS for SPL builds.
+ */
-+static struct ltq_spi_slave ltq_spi_slave;
++static struct ltq_spi_drv_data ltq_spi_slave;
+
-+static inline struct ltq_spi_slave *ltq_spi_slave_alloc(void)
++static struct ltq_spi_drv_data *ltq_spi_slave_alloc(unsigned int bus,
++ unsigned int cs)
+{
++ ltq_spi_slave.slave.bus = bus;
++ ltq_spi_slave.slave.cs = cs;
++
+ return &ltq_spi_slave;
+}
+
-+static inline void ltq_spi_slave_free(struct spi_slave *slave)
++static void ltq_spi_slave_free(struct spi_slave *slave)
+{
+}
+#else
-+static inline struct ltq_spi_slave *ltq_spi_slave_alloc(void)
++static struct ltq_spi_drv_data *ltq_spi_slave_alloc(unsigned int bus,
++ unsigned int cs)
+{
-+ return malloc(sizeof(struct ltq_spi_slave));
++ return spi_alloc_slave(struct ltq_spi_drv_data, bus, cs);
+}
+
-+static inline void ltq_spi_slave_free(struct spi_slave *slave)
++static void ltq_spi_slave_free(struct spi_slave *slave)
+{
-+ struct ltq_spi_slave *sl;
++ struct ltq_spi_drv_data *drv;
+
+ if (slave) {
-+ sl = to_ltq_spi_slave(slave);
-+ free(sl);
++ drv = to_ltq_spi_slave(slave);
++ free(drv);
+ }
+}
+#endif
+
-+static struct ltq_spi_regs *ltq_spi_regs =
-+ (struct ltq_spi_regs *) CKSEG1ADDR(LTQ_SPI_BASE);
++static unsigned int tx_fifo_size(struct ltq_spi_drv_data *drv)
++{
++ u32 id = ltq_readl(&drv->regs->id);
+
-+void spi_init(void)
++ return (id & LTQ_SPI_ID_TXFS_MASK) >> LTQ_SPI_ID_TXFS_SHIFT;
++}
++
++static unsigned int rx_fifo_size(struct ltq_spi_drv_data *drv)
++{
++ u32 id = ltq_readl(&drv->regs->id);
++
++ return (id & LTQ_SPI_ID_RXFS_MASK) >> LTQ_SPI_ID_RXFS_SHIFT;
++}
++
++static unsigned int tx_fifo_level(struct ltq_spi_drv_data *drv)
++{
++ u32 fstat = ltq_readl(&drv->regs->fstat);
++
++ return (fstat & LTQ_SPI_FSTAT_TXFFL_MASK) >> LTQ_SPI_FSTAT_TXFFL_SHIFT;
++}
++
++static unsigned int rx_fifo_level(struct ltq_spi_drv_data *drv)
++{
++ u32 fstat = ltq_readl(&drv->regs->fstat);
++
++ return fstat & LTQ_SPI_FSTAT_RXFFL_MASK;
++}
++
++static unsigned int tx_fifo_free(struct ltq_spi_drv_data *drv)
+{
-+ /* Power up SPI subsystem */
++ return tx_fifo_size(drv) - tx_fifo_level(drv);
++}
++
++static void hw_power_on(struct ltq_spi_drv_data *drv)
++{
++ u32 clc;
++
++ /* Power-up mdule */
+ ltq_pm_enable(LTQ_PM_SPI);
+
-+ /* Enable module and set clock divider to 1 */
-+ ltq_writel(&ltq_spi_regs->clc, 1 << LTQ_SPI_CLC_RMC_SHIFT);
++ /*
++ * Set clock divider for run mode to 1 to
++ * run at same frequency as FPI bus
++ */
++ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
++ ltq_writel(&drv->regs->clc, clc);
++}
+
-+ /* SPI/DIN input */
-+ gpio_set_altfunc(16, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
-+ /* SPI/DOUT output */
-+ gpio_set_altfunc(17, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
-+ /* SPI/CLK output */
-+ gpio_set_altfunc(18, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++static void hw_reset_fifos(struct ltq_spi_drv_data *drv)
++{
++ u32 val;
++
++ val = LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
++ ltq_writel(&drv->regs->txfcon, val);
++
++ val = LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
++ ltq_writel(&drv->regs->rxfcon, val);
+}
+
-+static inline u32 ltq_spi_calc_br(unsigned int max_hz)
++static int hw_is_busy(struct ltq_spi_drv_data *drv)
+{
-+ u32 speed_hz, spi_hz;
-+ u16 brt;
++ u32 stat = ltq_readl(&drv->regs->stat);
+
-+ /* SPI module clock is same as FPI bus clock */
-+ spi_hz = ltq_get_bus_clock();
++ return stat & LTQ_SPI_STAT_BSY;
++}
++
++static void hw_enter_config_mode(struct ltq_spi_drv_data *drv)
++{
++ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_CLREN);
++}
++
++static void hw_enter_active_mode(struct ltq_spi_drv_data *drv)
++{
++ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_SETEN);
++}
++
++static void hw_setup_speed_hz(struct ltq_spi_drv_data *drv,
++ unsigned int max_speed_hz)
++{
++ unsigned int spi_hz, speed_hz, brt;
+
+ /*
++ * SPI module clock is derived from FPI bus clock dependent on
++ * divider value in CLC.RMS which is always set to 1.
++ *
+ * f_SPI
+ * baudrate = --------------
+ * 2 * (BR + 1)
+ */
-+ spi_hz /= 2;
++ spi_hz = ltq_get_bus_clock() / 2;
+
++ /* TODO: optimize baudrate calculation */
+ for (brt = 0; brt < 0xFFFF; brt++) {
+ speed_hz = spi_hz / (brt + 1);
-+ if (speed_hz <= max_hz)
++ if (speed_hz <= max_speed_hz)
+ break;
+ }
+
-+ return brt;
++ ltq_writel(&drv->regs->brt, brt);
+}
+
-+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-+ unsigned int max_hz, unsigned int mode)
++static void hw_setup_bits_per_word(struct ltq_spi_drv_data *drv,
++ unsigned int bits_per_word)
+{
-+ u32 id;
-+ struct ltq_spi_slave *sl;
-+
-+ if (!spi_cs_is_valid(bus, cs))
-+ return NULL;
-+
-+ sl = ltq_spi_slave_alloc();
-+ if (!sl)
-+ return NULL;
++ u32 bm;
+
-+ /* Read HW capabilities */
-+ id = ltq_readl(&ltq_spi_regs->id);
-+ sl->txfs = (id & LTQ_SPI_ID_TXFS_MASK) >> LTQ_SPI_ID_TXFS_SHIFT;
-+ sl->rxfs = (id & LTQ_SPI_ID_RXFS_MASK) >> LTQ_SPI_ID_RXFS_SHIFT;
++ /* CON.BM value = bits_per_word - 1 */
++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
+
-+ sl->slave.bus = bus;
-+ sl->slave.cs = cs;
-+ sl->max_hz = max_hz;
-+ sl->mode = mode;
-+
-+ sl->brt = ltq_spi_calc_br(max_hz);
-+
-+ return &sl->slave;
++ ltq_clrsetbits(&drv->regs->con, LTQ_SPI_CON_BM_MASK, bm);
+}
+
-+void spi_free_slave(struct spi_slave *slave)
++static void hw_setup_clock_mode(struct ltq_spi_drv_data *drv, unsigned int mode)
+{
-+ ltq_spi_slave_free(slave);
-+}
-+
-+static int ltq_spi_wait_ready(struct ltq_spi_slave *sl)
-+{
-+ u32 stat;
-+ const unsigned long timeout = 20000;
-+ unsigned long timebase;
++ u32 con_set = 0, con_clr = 0;
+
-+ timebase = get_timer(0);
++ /*
++ * SPI mode mapping in CON register:
++ * Mode CPOL CPHA CON.PO CON.PH
++ * 0 0 0 0 1
++ * 1 0 1 0 0
++ * 2 1 0 1 1
++ * 3 1 1 1 0
++ */
++ if (mode & SPI_CPHA)
++ con_clr |= LTQ_SPI_CON_PH;
++ else
++ con_set |= LTQ_SPI_CON_PH;
+
-+ do {
-+ WATCHDOG_RESET();
++ if (mode & SPI_CPOL)
++ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
++ else
++ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
+
-+ stat = ltq_readl(&ltq_spi_regs->stat);
++ /* Set heading control */
++ if (mode & SPI_LSB_FIRST)
++ con_clr |= LTQ_SPI_CON_HB;
++ else
++ con_set |= LTQ_SPI_CON_HB;
+
-+ if (!(stat & LTQ_SPI_STAT_BSY))
-+ return 0;
-+ } while (get_timer(timebase) < timeout);
++ /* Set loopback mode */
++ if (mode & SPI_LOOP)
++ con_set |= LTQ_SPI_CON_LB;
++ else
++ con_clr |= LTQ_SPI_CON_LB;
+
-+ return 1;
++ ltq_clrsetbits(&drv->regs->con, con_clr, con_set);
+}
+
-+int spi_claim_bus(struct spi_slave *slave)
++static void hw_set_rxtx(struct ltq_spi_drv_data *drv)
+{
-+ struct ltq_spi_slave *sl = to_ltq_spi_slave(slave);
+ u32 con;
-+ int ret;
+
-+ /* Put module in configuration mode */
-+ ltq_setbits(&ltq_spi_regs->whbstate, LTQ_SPI_WHBSTATE_CLREN);
++ /* Configure transmitter and receiver */
++ con = ltq_readl(&drv->regs->con);
++ if (drv->tx)
++ con &= ~LTQ_SPI_CON_TXOFF;
++ else
++ con |= LTQ_SPI_CON_TXOFF;
+
-+ /* Enable and flush RX and TX FIFOs */
-+ ltq_setbits(&ltq_spi_regs->txfcon,
-+ LTQ_SPI_TXFCON_TXFLU | LTQ_SPI_TXFCON_TXFEN);
-+ ltq_setbits(&ltq_spi_regs->rxfcon,
-+ LTQ_SPI_RXFCON_RXFLU | LTQ_SPI_RXFCON_RXFEN);
++ if (drv->rx)
++ con &= ~LTQ_SPI_CON_RXOFF;
++ else
++ con |= LTQ_SPI_CON_RXOFF;
+
-+ ret = ltq_spi_wait_ready(sl);
-+ if (ret)
-+ return ret;
++ ltq_writel(&drv->regs->con, con);
++}
+
-+ /* Set baudrate */
-+ ltq_writel(&ltq_spi_regs->brt, sl->brt);
++static void hw_init(struct ltq_spi_drv_data *drv)
++{
++ hw_power_on(drv);
+
-+ /*
-+ * Disable byte valid control (ENBV = 0) and
-+ * set data width to 8 bit (BM = 7)
-+ */
-+ con = (7 << LTQ_SPI_CON_BM_SHIFT);
++ /* Put controller into config mode */
++ hw_enter_config_mode(drv);
+
-+ /* Disable transmitter and receiver */
-+ con |= (LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_TXOFF);
++ /* Disable all interrupts */
++ ltq_writel(&drv->regs->irnen, 0);
+
-+ /* Set SPI mode
-+ * Mapping: Mode CPOL CPHA CON.PO CON.PH
-+ * 0 0 0 0 1
-+ * 1 0 1 0 0
-+ * 2 1 0 1 1
-+ * 3 1 1 1 0
-+ */
-+ if (sl->mode & SPI_CPHA)
-+ con &= ~LTQ_SPI_CON_PH;
-+ else
-+ con |= LTQ_SPI_CON_PH;
++ /* Clear error flags */
++ ltq_clrsetbits(&drv->regs->whbstate, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS);
+
-+ if (sl->mode & SPI_CPOL)
-+ con |= LTQ_SPI_CON_PO;
-+ else
-+ con &= ~LTQ_SPI_CON_PO;
++ /* Enable error checking, disable TX/RX */
++ ltq_writel(&drv->regs->con, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
++ LTQ_SPI_CON_RXOFF);
+
-+ /* Set heading control */
-+ if (sl->mode & SPI_LSB_FIRST)
-+ con &= ~LTQ_SPI_CON_HB;
-+ else
-+ con |= LTQ_SPI_CON_HB;
++ /* Setup default SPI mode */
++ drv->bits_per_word = 8;
++ drv->speed_hz = 0;
++ hw_setup_bits_per_word(drv, drv->bits_per_word);
++ hw_setup_clock_mode(drv, SPI_MODE_0);
+
-+ /* Set loopback control */
-+ if (sl->mode & SPI_LOOP)
-+ con |= LTQ_SPI_CON_LB;
-+ else
-+ con &= ~LTQ_SPI_CON_LB;
++ /* Enable master mode and clear error flags */
++ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_SETMS |
++ LTQ_SPI_WHBSTATE_CLR_ERRORS);
+
-+ ltq_writel(&ltq_spi_regs->con, con);
++ /* Reset GPIO/CS registers */
++ ltq_writel(&drv->regs->gpocon, 0);
++ ltq_writel(&drv->regs->fgpo, 0xFF00);
+
-+ /* Set SPI master mode and enable SPI */
-+ ltq_setbits(&ltq_spi_regs->whbstate,
-+ LTQ_SPI_WHBSTATE_SETEN | LTQ_SPI_WHBSTATE_SETMS);
++ /* Enable and flush FIFOs */
++ hw_reset_fifos(drv);
+
-+ return 0;
++ /* SPI/DIN input */
++ gpio_set_altfunc(16, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* SPI/DOUT output */
++ gpio_set_altfunc(17, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* SPI/CLK output */
++ gpio_set_altfunc(18, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
-+void spi_release_bus(struct spi_slave *slave)
++static void tx_fifo_write(struct ltq_spi_drv_data *drv)
+{
-+ /* Put module in configuration mode */
-+ ltq_setbits(&ltq_spi_regs->whbstate, LTQ_SPI_WHBSTATE_CLREN);
++ const u8 *tx8;
++ const u16 *tx16;
++ const u32 *tx32;
++ u32 data;
++ unsigned int tx_free = tx_fifo_free(drv);
++
++ while (drv->tx_todo && tx_free) {
++ switch (drv->bits_per_word) {
++ case 8:
++ tx8 = drv->tx;
++ data = *tx8;
++ drv->tx_todo--;
++ drv->tx++;
++ break;
++ case 16:
++ tx16 = (u16 *) drv->tx;
++ data = *tx16;
++ drv->tx_todo -= 2;
++ drv->tx += 2;
++ break;
++ case 32:
++ tx32 = (u32 *) drv->tx;
++ data = *tx32;
++ drv->tx_todo -= 4;
++ drv->tx += 4;
++ break;
++ default:
++ return;
++ }
+
-+ /* Flush RX and TX FIFOs */
-+ ltq_setbits(&ltq_spi_regs->txfcon, LTQ_SPI_TXFCON_TXFLU);
-+ ltq_setbits(&ltq_spi_regs->rxfcon, LTQ_SPI_RXFCON_RXFLU);
++ ltq_writel(&drv->regs->tb, data);
++ tx_free--;
++ }
+}
+
-+static inline void ltq_spi_txfifo_write(struct ltq_spi_slave *sl)
++static void rx_fifo_read_full_duplex(struct ltq_spi_drv_data *drv)
+{
-+ u32 fstat, tb;
-+ u16 fifo_space;
++ u8 *rx8;
++ u16 *rx16;
++ u32 *rx32;
++ u32 data;
++ unsigned int rx_fill = rx_fifo_level(drv);
+
-+ fstat = ltq_readl(&ltq_spi_regs->fstat);
-+ fifo_space = sl->txfs - ((fstat & LTQ_SPI_FSTAT_TXFFL_MASK) >>
-+ LTQ_SPI_FSTAT_TXFFL_SHIFT);
++ while (rx_fill) {
++ data = ltq_readl(&drv->regs->rb);
+
-+ while (sl->tx_cnt < sl->len && fifo_space) {
-+ tb = *sl->tx++;
-+ ltq_writel(&ltq_spi_regs->tb, tb);
-+ fifo_space--;
-+ sl->tx_cnt++;
++ switch (drv->bits_per_word) {
++ case 8:
++ rx8 = drv->rx;
++ *rx8 = data;
++ drv->rx_todo--;
++ drv->rx++;
++ break;
++ case 16:
++ rx16 = (u16 *) drv->rx;
++ *rx16 = data;
++ drv->rx_todo -= 2;
++ drv->rx += 2;
++ break;
++ case 32:
++ rx32 = (u32 *) drv->rx;
++ *rx32 = data;
++ drv->rx_todo -= 4;
++ drv->rx += 4;
++ break;
++ default:
++ return;
++ }
++
++ rx_fill--;
++ }
++}
++
++static void rx_fifo_read_half_duplex(struct ltq_spi_drv_data *drv)
++{
++ u32 data, *rx32;
++ u8 *rx8;
++ unsigned int rxbv, shift;
++ unsigned int rx_fill = rx_fifo_level(drv);
++
++ /*
++ * In RX-only mode the bits per word value is ignored by HW. A value
++ * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
++ * If remaining RX bytes are less than 4, the FIFO must be read
++ * differently. The amount of received and valid bytes is indicated
++ * by STAT.RXBV register value.
++ */
++ while (rx_fill) {
++ if (drv->rx_todo < 4) {
++ rxbv = (ltq_readl(&drv->regs->stat) &
++ LTQ_SPI_STAT_RXBV_MASK) >>
++ LTQ_SPI_STAT_RXBV_SHIFT;
++ data = ltq_readl(&drv->regs->rb);
++
++ shift = (rxbv - 1) * 8;
++ rx8 = drv->rx;
++
++ while (rxbv) {
++ *rx8++ = (data >> shift) & 0xFF;
++ rxbv--;
++ shift -= 8;
++ drv->rx_todo--;
++ drv->rx++;
++
++ if (drv->rx_req)
++ drv->rx_req --;
++ }
++ } else {
++ data = ltq_readl(&drv->regs->rb);
++ rx32 = (u32 *) drv->rx;
++
++ *rx32++ = data;
++ drv->rx_todo -= 4;
++ drv->rx += 4;
++
++ if (drv->rx_req >= 4)
++ drv->rx_req -= 4;
++ }
++ rx_fill--;
+ }
+}
+
-+static inline void ltq_spi_rx_request(struct ltq_spi_slave *sl)
++static void rx_request(struct ltq_spi_drv_data *drv)
+{
-+ u32 rxreq, rxreq_max;
++ unsigned int rxreq, rxreq_max;
++
++ if (drv->rx_req)
++ return;
+
+ /*
-+ * In RX-only mode the serial clock is activated only after writing
-+ * the expected amount of RX bytes into RXREQ register.
+ * To avoid receive overflows at high clocks it is better to request
+ * only the amount of bytes that fits into all FIFOs. This value
+ * depends on the FIFO size implemented in hardware.
+ */
-+ rxreq = sl->len - sl->rx_cnt;
-+ rxreq_max = sl->rxfs << 2;
-+ rxreq = min(rxreq_max, rxreq);
++ rxreq = drv->rx_todo;
++ rxreq_max = rx_fifo_size(drv) * 4;
++ if (rxreq > rxreq_max)
++ rxreq = rxreq_max;
+
-+ if (!sl->rx_req && rxreq && sl->rx_cnt < sl->len) {
-+ ltq_writel(&ltq_spi_regs->rxreq, rxreq);
-+ sl->rx_req = rxreq;
-+ }
++ drv->rx_req = rxreq;
++ ltq_writel(&drv->regs->rxreq, rxreq);
+}
+
-+static void ltq_spi_rxfifo_read(struct ltq_spi_slave *sl)
++void spi_init(void)
+{
-+ u32 fstat, data, *rx32;
-+ u16 fifo_fill;
-+ u8 rxbv, shift, *rx8;
++}
+
-+ /* Determine how much FIFOs are filled with RX data */
-+ fstat = ltq_readl(&ltq_spi_regs->fstat);
-+ fifo_fill = fstat & LTQ_SPI_FSTAT_RXFFL_MASK;
++struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
++ unsigned int max_hz, unsigned int mode)
++{
++ struct ltq_spi_drv_data *drv;
+
-+ /*
-+ * The 32 bit FIFO is always used completely independent from the
-+ * bits_per_word value. Thus four bytes have to be read at once
-+ * per FIFO.
-+ */
-+ rx32 = (u32 *) sl->rx;
-+ while (sl->len - sl->rx_cnt >= 4 && fifo_fill) {
-+ data = ltq_readl(&ltq_spi_regs->rb);
-+ *rx32++ = data;
-+ sl->rx_cnt += 4;
-+ sl->rx_req -= 4;
-+ sl->rx += 4;
-+ fifo_fill--;
-+ }
++ if (!spi_cs_is_valid(bus, cs))
++ return NULL;
+
-+ /*
-+ * If there are remaining bytes, read byte count from STAT.RXBV
-+ * register and read the data byte-wise.
-+ */
-+ while (fifo_fill && sl->rx_cnt < sl->len) {
-+ fstat = ltq_readl(&ltq_spi_regs->stat);
-+ rxbv = (fstat & LTQ_SPI_STAT_RXBV_MASK) >>
-+ LTQ_SPI_STAT_RXBV_SHIFT;
++ drv = ltq_spi_slave_alloc(bus, cs);
++ if (!drv)
++ return NULL;
+
-+ if (!rxbv)
-+ break;
++ drv->regs = (struct ltq_spi_regs *) CKSEG1ADDR(LTQ_SPI_BASE);
+
-+ data = ltq_readl(&ltq_spi_regs->rb);
++ hw_init(drv);
+
-+ shift = (rxbv - 1) * 8;
-+ rx8 = sl->rx;
++ drv->max_hz = max_hz;
++ drv->mode = mode;
+
-+ while (rxbv) {
-+ *rx8++ = (data >> shift) & 0xFF;
-+ rxbv--;
-+ shift -= 8;
-+ sl->rx_cnt++;
-+ sl->rx_req--;
-+ sl->rx++;
-+ }
++ return &drv->slave;
++}
++
++void spi_free_slave(struct spi_slave *slave)
++{
++ ltq_spi_slave_free(slave);
++}
++
++static int ltq_spi_wait_ready(struct ltq_spi_drv_data *drv)
++{
++ const unsigned long timeout = 20000;
++ unsigned long timebase;
++
++ timebase = get_timer(0);
++
++ do {
++ WATCHDOG_RESET();
+
-+ fifo_fill--;
++ if (!hw_is_busy(drv))
++ return 0;
++ } while (get_timer(timebase) < timeout);
++
++ return 1;
++}
++
++int spi_claim_bus(struct spi_slave *slave)
++{
++ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
++ int ret;
++
++ ret = ltq_spi_wait_ready(drv);
++ if (ret) {
++ debug("cannot claim bus\n");
++ return ret;
+ }
++
++ hw_enter_config_mode(drv);
++ hw_setup_clock_mode(drv, drv->mode);
++ hw_setup_speed_hz(drv, drv->max_hz);
++ hw_setup_bits_per_word(drv, drv->bits_per_word);
++ hw_enter_active_mode(drv);
++
++ return 0;
++}
++
++void spi_release_bus(struct spi_slave *slave)
++{
++ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
++
++ hw_enter_config_mode(drv);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-+ const void *dout, void *din, unsigned long flags)
++ const void *dout, void *din, unsigned long flags)
+{
-+ struct ltq_spi_slave *sl = to_ltq_spi_slave(slave);
-+ int ret;
++
++ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
++ int ret = 0;
+
+ if (bitlen % 8)
+ return 1;
@@ -8892,60 +8984,73 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ goto done;
+ }
+
-+ sl->len = bitlen / 8;
-+ sl->tx = dout;
-+ sl->rx = din;
-+ sl->tx_cnt = 0;
-+ sl->rx_cnt = 0;
-+ sl->rx_req = 0;
-+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
-+ /* Enable transmitter */
-+ if (sl->tx)
-+ ltq_clrbits(&ltq_spi_regs->con, LTQ_SPI_CON_TXOFF);
++ drv->tx = dout;
++ drv->tx_todo = 0;
++ drv->rx = din;
++ drv->rx_todo = 0;
++ hw_set_rxtx(drv);
+
-+ /* Enable receiver */
-+ if (sl->rx)
-+ ltq_clrbits(&ltq_spi_regs->con, LTQ_SPI_CON_RXOFF);
++ if (drv->tx) {
++ drv->tx_todo = bitlen / 8;
+
-+ if (sl->tx)
-+ ltq_spi_txfifo_write(sl);
-+ else if (sl->rx)
-+ ltq_spi_rx_request(sl);
++ tx_fifo_write(drv);
++ }
+
-+ while (sl->tx_cnt != sl->len && sl->rx_cnt != sl->len) {
-+ if (sl->rx) {
-+ ltq_spi_rxfifo_read(sl);
++ if (drv->rx) {
++ drv->rx_todo = bitlen / 8;
+
-+ if (sl->tx)
-+ ltq_spi_txfifo_write(sl);
-+ else
-+ ltq_spi_rx_request(sl);
-+ } else if (sl->tx)
-+ ltq_spi_txfifo_write(sl);
++ if (!drv->tx)
++ rx_request(drv);
+ }
+
-+ ret = ltq_spi_wait_ready(sl);
++ for (;;) {
++ if (drv->tx) {
++ if (drv->rx && drv->rx_todo)
++ rx_fifo_read_full_duplex(drv);
++
++ if (drv->tx_todo)
++ tx_fifo_write(drv);
++ else
++ goto done;
++ } else if (drv->rx) {
++ if (drv->rx_todo) {
++ rx_fifo_read_half_duplex(drv);
++
++ if (drv->rx_todo)
++ rx_request(drv);
++ else
++ goto done;
++ } else {
++ goto done;
++ }
++ }
++ }
+
+done:
-+ /* Disable transmitter and receiver */
-+ ltq_setbits(&ltq_spi_regs->con, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++ ret = ltq_spi_wait_ready(drv);
++
++ drv->rx = NULL;
++ drv->tx = NULL;
++ hw_set_rxtx(drv);
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return ret;
+}
+diff --git a/include/configs/easy50712.h b/include/configs/easy50712.h
+new file mode 100644
+index 0000000..6d7988c
--- /dev/null
+++ b/include/configs/easy50712.h
-@@ -0,0 +1,78 @@
+@@ -0,0 +1,79 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
@@ -8965,6 +9070,8 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL /* Have an AT45DB321D serial flash */
+
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH
++
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+
+#define CONFIG_LTQ_SPL_COMP_LZO
@@ -9019,14 +9126,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ CONFIG_ENV_UPDATE_UBOOT_NOR
+
+#endif /* __CONFIG_H */
+diff --git a/include/configs/easy80920.h b/include/configs/easy80920.h
+new file mode 100644
+index 0000000..ad69bc2
--- /dev/null
+++ b/include/configs/easy80920.h
-@@ -0,0 +1,93 @@
+@@ -0,0 +1,92 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
@@ -9115,27 +9224,33 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ CONFIG_ENV_UPDATE_UBOOT_SF
+
+#endif /* __CONFIG_H */
+diff --git a/include/phy.h b/include/phy.h
+index f0f522a..818bd7f 100644
--- a/include/phy.h
+++ b/include/phy.h
-@@ -220,6 +220,7 @@ int gen10g_discover_mmds(struct phy_devi
- int phy_atheros_init(void);
+@@ -214,6 +214,7 @@ int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_davicom_init(void);
+ int phy_et1011c_init(void);
+int phy_lantiq_init(void);
int phy_lxt_init(void);
int phy_marvell_init(void);
int phy_micrel_init(void);
+diff --git a/spl/Makefile b/spl/Makefile
+index b366ac2..46eb851 100644
--- a/spl/Makefile
+++ b/spl/Makefile
-@@ -81,6 +81,8 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += p
- LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
- LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
- LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
+@@ -100,6 +100,8 @@ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/libphy.o
+ LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
+ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
+ LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/libwatchdog.o
+LIBS-$(CONFIG_SPL_LZMA_SUPPORT) += lib/lzma/liblzma.o
+LIBS-$(CONFIG_SPL_LZO_SUPPORT) += lib/lzo/liblzo.o
- ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ ifneq ($(CONFIG_OMAP_COMMON),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
+diff --git a/tools/.gitignore b/tools/.gitignore
+index a7fee26..4d56882 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -2,6 +2,7 @@
@@ -9146,9 +9261,11 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
/kwboot
/mkenvimage
/mkimage
+diff --git a/tools/Makefile b/tools/Makefile
+index ca76f94..ae1714b 100644
--- a/tools/Makefile
+++ b/tools/Makefile
-@@ -65,6 +65,7 @@ BIN_FILES-$(CONFIG_VIDEO_LOGO) += bmp_lo
+@@ -49,6 +49,7 @@ BIN_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo$(SFX)
BIN_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc$(SFX)
BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
@@ -9156,15 +9273,15 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
-@@ -89,6 +90,7 @@ OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envc
- NOPED_OBJ_FILES-y += fit_image.o
- OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
- OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
+@@ -95,6 +96,7 @@ OBJ_FILES-$(CONFIG_MX28) += mxsboot.o
+ OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
+ OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
+ OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o
+OBJ_FILES-$(CONFIG_SOC_LANTIQ) += ltq-boot-image.o
+ OBJ_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo.o
OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o
- NOPED_OBJ_FILES-y += aisimage.o
- NOPED_OBJ_FILES-y += kwbimage.o
-@@ -193,6 +195,10 @@ $(obj)img2srec$(SFX): $(obj)img2srec.o
+
+@@ -195,6 +197,10 @@ $(obj)img2srec$(SFX): $(obj)img2srec.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
@@ -9175,14 +9292,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
$(obj)xway-swap-bytes$(SFX): $(obj)xway-swap-bytes.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+diff --git a/tools/ltq-boot-image.c b/tools/ltq-boot-image.c
+new file mode 100644
+index 0000000..75a188c
--- /dev/null
+++ b/tools/ltq-boot-image.c
-@@ -0,0 +1,316 @@
+@@ -0,0 +1,315 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <stdio.h>
@@ -9409,7 +9528,7 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ int fd;
+
-+ fd = open(name, O_RDWR | O_CREAT | O_TRUNC | O_SYNC | O_BINARY, 0666);
++ fd = open(name, O_RDWR | O_CREAT | O_TRUNC | O_BINARY, 0666);
+ if (0 > fd) {
+ fprintf(stderr, "Cannot open %s: %s\n", name,
+ strerror(errno));
@@ -9494,3 +9613,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return EXIT_FAILURE;
+}
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0014-sf-macronix-add-support-for-MX25L25635E.patch b/package/boot/uboot-lantiq/patches/0014-sf-macronix-add-support-for-MX25L25635E.patch
deleted file mode 100644
index 8e33836..0000000
--- a/package/boot/uboot-lantiq/patches/0014-sf-macronix-add-support-for-MX25L25635E.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 0f31fef3d6a5110684ea31c5064c45fc448013d6 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 15:14:24 +0100
-Subject: sf: macronix: add support for MX25L25635E
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/macronix.c
-+++ b/drivers/mtd/spi/macronix.c
-@@ -79,6 +79,11 @@ static const struct macronix_spi_flash_p
- .nr_blocks = 256,
- .name = "MX25L12855E",
- },
-+ {
-+ .idcode = 0x2019,
-+ .nr_blocks = 512,
-+ .name = "MX25L25635E",
-+ },
- };
-
- static __maybe_unused int macronix_set_4byte_mode(struct spi_flash *flash)
diff --git a/package/boot/uboot-lantiq/patches/0015-MIPS-lantiq-add-support-for-Lantiq-XWAY-ARX100-SoC-f.patch b/package/boot/uboot-lantiq/patches/0015-MIPS-lantiq-add-support-for-Lantiq-XWAY-ARX100-SoC-f.patch
new file mode 100644
index 0000000..6479ff9
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0015-MIPS-lantiq-add-support-for-Lantiq-XWAY-ARX100-SoC-f.patch
@@ -0,0 +1,1283 @@
+From 4953294aa8f8b9023e6b5f7f39059706c72d916c Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 9 Dec 2012 17:54:56 +0100
+Subject: MIPS: lantiq: add support for Lantiq XWAY ARX100 SoC family
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/arch/mips/cpu/mips32/arx100/Makefile b/arch/mips/cpu/mips32/arx100/Makefile
+new file mode 100644
+index 0000000..98f5f73
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/Makefile
+@@ -0,0 +1,31 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(SOC).o
++
++COBJS-y += cgu.o chipid.o ebu.o mem.o pmu.o rcu.o
++SOBJS-y += cgu_init.o mem_init.o
++
++COBJS := $(COBJS-y)
++SOBJS := $(SOBJS-y)
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
++
++all: $(LIB)
++
++$(LIB): $(obj).depend $(OBJS)
++ $(call cmd_link_o_target, $(OBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/arch/mips/cpu/mips32/arx100/cgu.c b/arch/mips/cpu/mips32/arx100/cgu.c
+new file mode 100644
+index 0000000..6e71ee7
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/cgu.c
+@@ -0,0 +1,109 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/soc.h>
++#include <asm/lantiq/clk.h>
++#include <asm/lantiq/io.h>
++
++#define CGU_SYS_DDR_SEL (1 << 0)
++#define CGU_SYS_CPU_SEL (1 << 2)
++#define CGU_SYS_SYS_SHIFT 3
++#define CGU_SYS_SYS_MASK (0x3 << CGU_SYS_SYS_SHIFT)
++#define CGU_SYS_FPI_SEL (1 << 6)
++#define CGU_SYS_PPE_SEL (1 << 7)
++
++struct ltq_cgu_regs {
++ u32 rsvd0;
++ __be32 pll0_cfg; /* PLL0 config */
++ __be32 pll1_cfg; /* PLL1 config */
++ u32 rsvd2;
++ __be32 sys; /* System clock */
++ __be32 update; /* CGU update control */
++ __be32 if_clk; /* Interface clock */
++ u32 rsvd3;
++ __be32 smd; /* SDRAM Memory Control */
++ u32 rsvd4;
++ __be32 ct1_sr; /* CT status 1 */
++ __be32 ct_kval; /* CT K value */
++ __be32 pcm_cr; /* PCM control */
++};
++
++static struct ltq_cgu_regs *ltq_cgu_regs =
++ (struct ltq_cgu_regs *) CKSEG1ADDR(LTQ_CGU_BASE);
++
++static inline u32 ltq_cgu_sys_readl(u32 mask, u32 shift)
++{
++ return (ltq_readl(&ltq_cgu_regs->sys) & mask) >> shift;
++}
++
++static unsigned long ltq_get_system_clock(void)
++{
++ u32 sys_sel;
++ unsigned long clk;
++
++ sys_sel = ltq_cgu_sys_readl(CGU_SYS_SYS_MASK, CGU_SYS_SYS_SHIFT);
++
++ switch (sys_sel) {
++ case 0:
++ clk = CLOCK_333_MHZ;
++ break;
++ case 2:
++ clk = CLOCK_393_MHZ;
++ break;
++ default:
++ clk = 0;
++ break;
++ }
++
++ return clk;
++}
++
++unsigned long ltq_get_io_region_clock(void)
++{
++ u32 ddr_sel;
++ unsigned long clk;
++
++ ddr_sel = ltq_cgu_sys_readl(1, CGU_SYS_DDR_SEL);
++
++ if (ddr_sel)
++ clk = ltq_get_system_clock() / 3;
++ else
++ clk = ltq_get_system_clock() / 2;
++
++ return clk;
++}
++
++unsigned long ltq_get_cpu_clock(void)
++{
++ u32 cpu_sel;
++ unsigned long clk;
++
++ cpu_sel = ltq_cgu_sys_readl(1, CGU_SYS_CPU_SEL);
++
++ if (cpu_sel)
++ clk = ltq_get_io_region_clock();
++ else
++ clk = ltq_get_system_clock();
++
++ return clk;
++}
++
++unsigned long ltq_get_bus_clock(void)
++{
++ u32 fpi_sel;
++ unsigned long clk;
++
++ fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
++
++ if (fpi_sel)
++ clk = ltq_get_io_region_clock() / 2;
++ else
++ clk = ltq_get_io_region_clock();
++
++ return clk;
++}
+diff --git a/arch/mips/cpu/mips32/arx100/cgu_init.S b/arch/mips/cpu/mips32/arx100/cgu_init.S
+new file mode 100644
+index 0000000..ed70cb2
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/cgu_init.S
+@@ -0,0 +1,105 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <config.h>
++#include <asm/asm.h>
++#include <asm/regdef.h>
++#include <asm/addrspace.h>
++#include <asm/arch/soc.h>
++
++/* CGU module register */
++#define CGU_PLL0_CFG 0x0004 /* PLL0 config */
++#define CGU_PLL1_CFG 0x0008 /* PLL1 config */
++#define CGU_SYS 0x0010 /* System clock */
++#define CGU_UPDATE 0x0014 /* Clock update control */
++
++/* Valid SYS.PPE_SEL values */
++#define CGU_SYS_PPESEL_SHIFT 7
++#define CGU_SYS_PPESEL_250_MHZ (0x1 << CGU_SYS_PPESEL_SHIFT)
++
++/* Valid SYS.SYS_SEL values */
++#define CGU_SYS_SYSSEL_SHIFT 3
++#define CGU_SYS_SYSSEL_PLL0_333_MHZ (0x0 << CGU_SYS_SYSSEL_SHIFT)
++#define CGU_SYS_SYSSEL_PLL1_393_MHZ (0x2 << CGU_SYS_SYSSEL_SHIFT)
++
++/* Valid SYS.CPU_SEL values */
++#define CGU_SYS_CPUSEL_SHIFT 2
++#define CGU_SYS_CPUSEL_EQUAL_SYSCLK (0x0 << CGU_SYS_CPUSEL_SHIFT)
++#define CGU_SYS_CPUSEL_EQUAL_DDRCLK (0x1 << CGU_SYS_CPUSEL_SHIFT)
++
++/* Valid SYS.DDR_SEL values */
++#define CGU_SYS_DDRSEL_HALF_SYSCLK 0x0
++#define CGU_SYS_DDRSEL_THIRD_SYSCLK 0x1
++
++#define CGU_UPDATE_UPD 0x1
++
++#if (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_393_DDR_197)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL1_393_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_SYSCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_HALF_SYSCLK
++#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_197_DDR_197)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL1_393_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_DDRCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_HALF_SYSCLK
++#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_333_DDR_167)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL0_333_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_SYSCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_HALF_SYSCLK
++#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_167_DDR_167)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL0_333_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_DDRCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_HALF_SYSCLK
++#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_131_DDR_131)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL1_393_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_DDRCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_THIRD_SYSCLK
++#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_111_DDR_111)
++#define CGU_SYS_PPESEL_CONFIG CGU_SYS_PPESEL_250_MHZ
++#define CGU_SYS_SYSSEL_CONFIG CGU_SYS_SYSSEL_PLL0_333_MHZ
++#define CGU_SYS_CPUSEL_CONFIG CGU_SYS_CPUSEL_EQUAL_DDRCLK
++#define CGU_SYS_DDRSEL_CONFIG CGU_SYS_DDRSEL_THIRD_SYSCLK
++#else
++#error "Invalid system clock configuration!"
++#endif
++
++/* Build register values */
++#define CGU_SYS_VALUE (CGU_SYS_PPESEL_CONFIG | \
++ CGU_SYS_SYSSEL_CONFIG | \
++ CGU_SYS_CPUSEL_CONFIG | \
++ CGU_SYS_DDRSEL_CONFIG)
++
++ .set noreorder
++
++LEAF(ltq_cgu_init)
++ /* Load current CGU register value */
++ li t0, (LTQ_CGU_BASE | KSEG1)
++ lw t1, CGU_SYS(t0)
++
++ /* Load target CGU register values */
++ li t2, CGU_SYS_VALUE
++
++ /* Only update registers if values differ */
++ beq t1, t2, finished
++ nop
++
++ /* Store target register values */
++ sw t2, CGU_SYS(t0)
++
++ /* Trigger CGU update */
++ li t1, CGU_UPDATE_UPD
++ sw t1, CGU_UPDATE(t0)
++
++finished:
++ jr ra
++ nop
++
++ END(ltq_cgu_init)
+diff --git a/arch/mips/cpu/mips32/arx100/chipid.c b/arch/mips/cpu/mips32/arx100/chipid.c
+new file mode 100644
+index 0000000..e97d7ef
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/chipid.c
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/lantiq/io.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/arch/soc.h>
++
++#define LTQ_CHIPID_VERSION_SHIFT 28
++#define LTQ_CHIPID_VERSION_MASK (0xF << LTQ_CHIPID_VERSION_SHIFT)
++#define LTQ_CHIPID_PNUM_SHIFT 12
++#define LTQ_CHIPID_PNUM_MASK (0xFFFF << LTQ_CHIPID_PNUM_SHIFT)
++
++struct ltq_chipid_regs {
++ u32 manid; /* Manufacturer identification */
++ u32 chipid; /* Chip identification */
++};
++
++static struct ltq_chipid_regs *ltq_chipid_regs =
++ (struct ltq_chipid_regs *) CKSEG1ADDR(LTQ_CHIPID_BASE);
++
++unsigned int ltq_chip_version_get(void)
++{
++ u32 chipid;
++
++ chipid = ltq_readl(&ltq_chipid_regs->chipid);
++
++ return (chipid & LTQ_CHIPID_VERSION_MASK) >> LTQ_CHIPID_VERSION_SHIFT;
++}
++
++unsigned int ltq_chip_partnum_get(void)
++{
++ u32 chipid;
++
++ chipid = ltq_readl(&ltq_chipid_regs->chipid);
++
++ return (chipid & LTQ_CHIPID_PNUM_MASK) >> LTQ_CHIPID_PNUM_SHIFT;
++}
++
++const char *ltq_chip_partnum_str(void)
++{
++ enum ltq_chip_partnum partnum = ltq_chip_partnum_get();
++
++ switch (partnum) {
++ case LTQ_SOC_ARX188:
++ return "ARX188";
++ case LTQ_SOC_ARX186:
++ case LTQ_SOC_ARX186_2:
++ return "ARX186";
++ case LTQ_SOC_ARX182:
++ return "ARX182";
++ default:
++ printf("Unknown partnum: %x\n", partnum);
++ }
++
++ return "";
++}
+diff --git a/arch/mips/cpu/mips32/arx100/config.mk b/arch/mips/cpu/mips32/arx100/config.mk
+new file mode 100644
+index 0000000..442156a
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/config.mk
+@@ -0,0 +1,30 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PF_CPPFLAGS_XRX := $(call cc-option,-mtune=34kc,)
++PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_XRX)
++
++ifdef CONFIG_SPL_BUILD
++PF_ABICALLS := -mno-abicalls
++PF_PIC := -fno-pic
++PF_PIE :=
++USE_PRIVATE_LIBGCC := yes
++endif
++
++LIBS-y += $(CPUDIR)/lantiq-common/liblantiq-common.o
++
++ifndef CONFIG_SPL_BUILD
++ifdef CONFIG_SYS_BOOT_SFSPL
++ALL-y += $(obj)u-boot.ltq.sfspl
++ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.sfspl
++ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.sfspl
++endif
++ifdef CONFIG_SYS_BOOT_NORSPL
++ALL-y += $(obj)u-boot.ltq.norspl
++ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.norspl
++ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
++endif
++endif
+diff --git a/arch/mips/cpu/mips32/arx100/ebu.c b/arch/mips/cpu/mips32/arx100/ebu.c
+new file mode 100644
+index 0000000..4ab3cf1
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/ebu.c
+@@ -0,0 +1,111 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/soc.h>
++#include <asm/lantiq/io.h>
++
++#define EBU_ADDRSEL_MASK(mask) ((mask & 0xf) << 4)
++#define EBU_ADDRSEL_REGEN (1 << 0)
++
++#define EBU_CON_WRDIS (1 << 31)
++#define EBU_CON_AGEN_DEMUX (0x0 << 24)
++#define EBU_CON_AGEN_MUX (0x2 << 24)
++#define EBU_CON_SETUP (1 << 22)
++#define EBU_CON_WAIT_DIS (0x0 << 20)
++#define EBU_CON_WAIT_ASYNC (0x1 << 20)
++#define EBU_CON_WAIT_SYNC (0x2 << 20)
++#define EBU_CON_WINV (1 << 19)
++#define EBU_CON_PW_8BIT (0x0 << 16)
++#define EBU_CON_PW_16BIT (0x1 << 16)
++#define EBU_CON_ALEC(cycles) ((cycles & 0x3) << 14)
++#define EBU_CON_BCGEN_CS (0x0 << 12)
++#define EBU_CON_BCGEN_INTEL (0x1 << 12)
++#define EBU_CON_BCGEN_MOTOROLA (0x2 << 12)
++#define EBU_CON_WAITWRC(cycles) ((cycles & 0x7) << 8)
++#define EBU_CON_WAITRDC(cycles) ((cycles & 0x3) << 6)
++#define EBU_CON_HOLDC(cycles) ((cycles & 0x3) << 4)
++#define EBU_CON_RECOVC(cycles) ((cycles & 0x3) << 2)
++#define EBU_CON_CMULT_1 0x0
++#define EBU_CON_CMULT_4 0x1
++#define EBU_CON_CMULT_8 0x2
++#define EBU_CON_CMULT_16 0x3
++
++#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
++#define ebu_region0_enable 1
++#else
++#define ebu_region0_enable 0
++#endif
++
++#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
++#define ebu_region1_enable 1
++#else
++#define ebu_region1_enable 0
++#endif
++
++struct ltq_ebu_regs {
++ u32 clc;
++ u32 rsvd0;
++ u32 id;
++ u32 rsvd1;
++ u32 con;
++ u32 rsvd2[3];
++ u32 addr_sel_0;
++ u32 addr_sel_1;
++ u32 addr_sel_2;
++ u32 addr_sel_3;
++ u32 rsvd3[12];
++ u32 con_0;
++ u32 con_1;
++ u32 con_2;
++ u32 con_3;
++};
++
++static struct ltq_ebu_regs *ltq_ebu_regs =
++ (struct ltq_ebu_regs *) CKSEG1ADDR(LTQ_EBU_BASE);
++
++void ltq_ebu_init(void)
++{
++ if (ebu_region0_enable) {
++ /*
++ * Map EBU region 0 to range 0x10000000-0x13ffffff and enable
++ * region control. This supports up to 32 MiB NOR flash in
++ * bank 0.
++ */
++ ltq_writel(&ltq_ebu_regs->addr_sel_0, LTQ_EBU_REGION0_BASE |
++ EBU_ADDRSEL_MASK(1) | EBU_ADDRSEL_REGEN);
++
++ ltq_writel(&ltq_ebu_regs->con_0, EBU_CON_AGEN_DEMUX |
++ EBU_CON_WAIT_DIS | EBU_CON_PW_16BIT |
++ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
++ EBU_CON_WAITWRC(7) | EBU_CON_WAITRDC(3) |
++ EBU_CON_HOLDC(3) | EBU_CON_RECOVC(3) |
++ EBU_CON_CMULT_16);
++ } else
++ ltq_clrbits(&ltq_ebu_regs->addr_sel_0, EBU_ADDRSEL_REGEN);
++
++ if (ebu_region1_enable) {
++ /*
++ * Map EBU region 1 to range 0x14000000-0x13ffffff and enable
++ * region control. This supports NAND flash in bank 1.
++ */
++ ltq_writel(&ltq_ebu_regs->addr_sel_1, LTQ_EBU_REGION1_BASE |
++ EBU_ADDRSEL_MASK(3) | EBU_ADDRSEL_REGEN);
++
++ ltq_writel(&ltq_ebu_regs->con_1, EBU_CON_AGEN_DEMUX |
++ EBU_CON_SETUP | EBU_CON_WAIT_DIS | EBU_CON_PW_8BIT |
++ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
++ EBU_CON_WAITWRC(2) | EBU_CON_WAITRDC(2) |
++ EBU_CON_HOLDC(1) | EBU_CON_RECOVC(1) |
++ EBU_CON_CMULT_4);
++ } else
++ ltq_clrbits(&ltq_ebu_regs->addr_sel_1, EBU_ADDRSEL_REGEN);
++}
++
++void *flash_swap_addr(unsigned long addr)
++{
++ return (void *)(addr ^ 2);
++}
+diff --git a/arch/mips/cpu/mips32/arx100/mem.c b/arch/mips/cpu/mips32/arx100/mem.c
+new file mode 100644
+index 0000000..1fba7cd
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/mem.c
+@@ -0,0 +1,30 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/soc.h>
++#include <asm/lantiq/io.h>
++
++static void *ltq_mc_ddr_base = (void *) CKSEG1ADDR(LTQ_MC_DDR_BASE);
++
++static inline u32 ltq_mc_dc_read(u32 index)
++{
++ return ltq_readl(ltq_mc_ddr_base + LTQ_MC_DDR_DC_OFFSET(index));
++}
++
++phys_size_t initdram(int board_type)
++{
++ u32 col, row, dc04, dc19, dc20;
++
++ dc04 = ltq_mc_dc_read(4);
++ dc19 = ltq_mc_dc_read(19);
++ dc20 = ltq_mc_dc_read(20);
++
++ row = (dc04 & 0xF) - ((dc19 & 0x700) >> 8);
++ col = ((dc04 & 0xF00) >> 8) - (dc20 & 0x7);
++
++ return (1 << (row + col)) * 4 * 2;
++}
+diff --git a/arch/mips/cpu/mips32/arx100/mem_init.S b/arch/mips/cpu/mips32/arx100/mem_init.S
+new file mode 100644
+index 0000000..5d70842
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/mem_init.S
+@@ -0,0 +1,114 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <config.h>
++#include <asm/asm.h>
++#include <asm/regdef.h>
++#include <asm/addrspace.h>
++#include <asm/arch/soc.h>
++
++/* Must be configured in BOARDDIR */
++#include <ddr_settings.h>
++
++#define LTQ_MC_GEN_ERRCAUSE 0x0010
++#define LTQ_MC_GEN_ERRADDR 0x0020
++#define LTQ_MC_GEN_CON 0x0060
++#define LTQ_MC_GEN_STAT 0x0070
++#define LTQ_MC_GEN_CON_SRAM_DDR_ENABLE 0xD
++#define LTQ_MC_GEN_STAT_DLCK_PWRON 0xC
++
++#define LTQ_MC_DDR_DC03_MC_START 0x100
++
++ /* Store given value in MC DDR CCRx register */
++ .macro dc_sw num, val
++ li t2, \val
++ sw t2, LTQ_MC_DDR_DC_OFFSET(\num)(t1)
++ .endm
++
++LEAF(ltq_mem_init)
++ /* Load MC General and MC DDR module base */
++ li t0, (LTQ_MC_GEN_BASE | KSEG1)
++ li t1, (LTQ_MC_DDR_BASE | KSEG1)
++
++ /* Clear access error log registers */
++ sw zero, LTQ_MC_GEN_ERRCAUSE(t0)
++ sw zero, LTQ_MC_GEN_ERRADDR(t0)
++
++ /* Enable DDR and SRAM module in memory controller */
++ li t2, LTQ_MC_GEN_CON_SRAM_DDR_ENABLE
++ sw t2, LTQ_MC_GEN_CON(t0)
++
++ /* Clear start bit of DDR memory controller */
++ sw zero, LTQ_MC_DDR_DC_OFFSET(3)(t1)
++
++ /* Init memory controller registers with values ddr_settings.h */
++ dc_sw 0, MC_DC00_VALUE
++ dc_sw 1, MC_DC01_VALUE
++ dc_sw 2, MC_DC02_VALUE
++ dc_sw 4, MC_DC04_VALUE
++ dc_sw 5, MC_DC05_VALUE
++ dc_sw 6, MC_DC06_VALUE
++ dc_sw 7, MC_DC07_VALUE
++ dc_sw 8, MC_DC08_VALUE
++ dc_sw 9, MC_DC09_VALUE
++
++ dc_sw 10, MC_DC10_VALUE
++ dc_sw 11, MC_DC11_VALUE
++ dc_sw 12, MC_DC12_VALUE
++ dc_sw 13, MC_DC13_VALUE
++ dc_sw 14, MC_DC14_VALUE
++ dc_sw 15, MC_DC15_VALUE
++ dc_sw 16, MC_DC16_VALUE
++ dc_sw 17, MC_DC17_VALUE
++ dc_sw 18, MC_DC18_VALUE
++ dc_sw 19, MC_DC19_VALUE
++
++ dc_sw 20, MC_DC20_VALUE
++ dc_sw 21, MC_DC21_VALUE
++ dc_sw 22, MC_DC22_VALUE
++ dc_sw 23, MC_DC23_VALUE
++ dc_sw 24, MC_DC24_VALUE
++ dc_sw 25, MC_DC25_VALUE
++ dc_sw 26, MC_DC26_VALUE
++ dc_sw 27, MC_DC27_VALUE
++ dc_sw 28, MC_DC28_VALUE
++ dc_sw 29, MC_DC29_VALUE
++
++ dc_sw 30, MC_DC30_VALUE
++ dc_sw 31, MC_DC31_VALUE
++ dc_sw 32, MC_DC32_VALUE
++ dc_sw 33, MC_DC33_VALUE
++ dc_sw 34, MC_DC34_VALUE
++ dc_sw 35, MC_DC35_VALUE
++ dc_sw 36, MC_DC36_VALUE
++ dc_sw 37, MC_DC37_VALUE
++ dc_sw 38, MC_DC38_VALUE
++ dc_sw 39, MC_DC39_VALUE
++
++ dc_sw 40, MC_DC40_VALUE
++ dc_sw 41, MC_DC41_VALUE
++ dc_sw 42, MC_DC42_VALUE
++ dc_sw 43, MC_DC43_VALUE
++ dc_sw 44, MC_DC44_VALUE
++ dc_sw 45, MC_DC45_VALUE
++ dc_sw 46, MC_DC46_VALUE
++
++ /* Set start bit of DDR memory controller */
++ li t2, LTQ_MC_DDR_DC03_MC_START
++ sw t2, LTQ_MC_DDR_DC_OFFSET(3)(t1)
++
++ /* Wait until DLL has locked and core is ready for data transfers */
++wait_ready:
++ lw t2, LTQ_MC_GEN_STAT(t0)
++ li t3, LTQ_MC_GEN_STAT_DLCK_PWRON
++ and t2, t3
++ bne t2, t3, wait_ready
++
++finished:
++ jr ra
++
++ END(ltq_mem_init)
+diff --git a/arch/mips/cpu/mips32/arx100/pmu.c b/arch/mips/cpu/mips32/arx100/pmu.c
+new file mode 100644
+index 0000000..d2afe96
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/pmu.c
+@@ -0,0 +1,120 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/lantiq/io.h>
++#include <asm/lantiq/pm.h>
++#include <asm/arch/soc.h>
++
++#define LTQ_PMU_PWDCR_RESERVED 0xE00C200C
++
++#define LTQ_PMU_PWDCR_SWITCH (1 << 28)
++#define LTQ_PMU_PWDCR_USB1 (1 << 27)
++#define LTQ_PMU_PWDCR_USB1_PHY (1 << 26)
++#define LTQ_PMU_PWDCR_TDM (1 << 25)
++#define LTQ_PMU_PWDCR_DDR_MEM (1 << 24)
++#define LTQ_PMU_PWDCR_PPE_DP (1 << 23)
++#define LTQ_PMU_PWDCR_PPE_EMA (1 << 22)
++#define LTQ_PMU_PWDCR_PPE_TC (1 << 21)
++#define LTQ_PMU_PWDCR_DEU (1 << 20)
++#define LTQ_PMU_PWDCR_UART1 (1 << 17)
++#define LTQ_PMU_PWDCR_SDIO (1 << 16)
++#define LTQ_PMU_PWDCR_AHB (1 << 15)
++#define LTQ_PMU_PWDCR_FPI0 (1 << 14)
++#define LTQ_PMU_PWDCR_GPTC (1 << 12)
++#define LTQ_PMU_PWDCR_LEDC (1 << 11)
++#define LTQ_PMU_PWDCR_EBU (1 << 10)
++#define LTQ_PMU_PWDCR_DSL (1 << 9)
++#define LTQ_PMU_PWDCR_SPI (1 << 8)
++#define LTQ_PMU_PWDCR_UART0 (1 << 7)
++#define LTQ_PMU_PWDCR_USB (1 << 6)
++#define LTQ_PMU_PWDCR_DMA (1 << 5)
++#define LTQ_PMU_PWDCR_PCI (1 << 4)
++#define LTQ_PMU_PWDCR_FPI1 (1 << 1)
++#define LTQ_PMU_PWDCR_USB0_PHY (1 << 0)
++
++struct ltq_pmu_regs {
++ u32 rsvd0[7];
++ __be32 pwdcr;
++ __be32 sr;
++};
++
++static struct ltq_pmu_regs *ltq_pmu_regs =
++ (struct ltq_pmu_regs *) CKSEG1ADDR(LTQ_PMU_BASE);
++
++u32 ltq_pm_map(enum ltq_pm_modules module)
++{
++ u32 val;
++
++ switch (module) {
++ case LTQ_PM_CORE:
++ val = LTQ_PMU_PWDCR_DDR_MEM | LTQ_PMU_PWDCR_UART1 |
++ LTQ_PMU_PWDCR_FPI0 | LTQ_PMU_PWDCR_LEDC |
++ LTQ_PMU_PWDCR_EBU;
++ break;
++ case LTQ_PM_DMA:
++ val = LTQ_PMU_PWDCR_DMA;
++ break;
++ case LTQ_PM_ETH:
++ val = LTQ_PMU_PWDCR_SWITCH | LTQ_PMU_PWDCR_PPE_DP |
++ LTQ_PMU_PWDCR_PPE_EMA | LTQ_PMU_PWDCR_PPE_TC;
++ break;
++ case LTQ_PM_SPI:
++ val = LTQ_PMU_PWDCR_SPI;
++ break;
++ default:
++ val = 0;
++ break;
++ }
++
++ return val;
++}
++
++int ltq_pm_enable(enum ltq_pm_modules module)
++{
++ const unsigned long timeout = 1000;
++ unsigned long timebase;
++ u32 sr, val;
++
++ val = ltq_pm_map(module);
++ if (unlikely(!val))
++ return 1;
++
++ ltq_clrbits(&ltq_pmu_regs->pwdcr, val);
++
++ timebase = get_timer(0);
++
++ do {
++ sr = ltq_readl(&ltq_pmu_regs->sr);
++ if (~sr & val)
++ return 0;
++ } while (get_timer(timebase) < timeout);
++
++ return 1;
++}
++
++int ltq_pm_disable(enum ltq_pm_modules module)
++{
++ u32 val;
++
++ val = ltq_pm_map(module);
++ if (unlikely(!val))
++ return 1;
++
++ ltq_setbits(&ltq_pmu_regs->pwdcr, val);
++
++ return 0;
++}
++
++void ltq_pmu_init(void)
++{
++ u32 set, clr;
++
++ clr = ltq_pm_map(LTQ_PM_CORE);
++ set = ~(LTQ_PMU_PWDCR_RESERVED | clr);
++
++ ltq_clrsetbits(&ltq_pmu_regs->pwdcr, clr, set);
++}
+diff --git a/arch/mips/cpu/mips32/arx100/rcu.c b/arch/mips/cpu/mips32/arx100/rcu.c
+new file mode 100644
+index 0000000..4ff6935
+--- /dev/null
++++ b/arch/mips/cpu/mips32/arx100/rcu.c
+@@ -0,0 +1,130 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/lantiq/io.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/soc.h>
++
++#define LTQ_RCU_RD_SRST (1 << 30) /* Global SW Reset */
++#define LTQ_RCU_RD_USB1 (1 << 28) /* USB1 MAC and PHY */
++#define LTQ_RCU_RD_REG25_PD (1 << 26) /* Power down 2.5V regulator */
++#define LTQ_RCU_RD_PPE_ATM_TC (1 << 22) /* PPE ATM TC */
++#define LTQ_RCU_RD_ETHSW (1 << 21) /* Ethernet switch */
++#define LTQ_RCU_RD_DSP_DEN (1 << 20) /* Enable DSP JTAG */
++#define LTQ_RCU_RD_TDM (1 << 19) /* TDM module interface */
++#define LTQ_RCU_RD_MC (1 << 14) /* Memory Controller */
++#define LTQ_RCU_RD_PCI (1 << 13) /* PCI core */
++#define LTQ_RCU_RD_SDIO (1 << 10) /* SDIO core */
++#define LTQ_RCU_RD_DMA (1 << 9) /* DMA core */
++#define LTQ_RCU_RD_PPE (1 << 8) /* PPE core */
++#define LTQ_RCU_RD_ARC_DFE (1 << 7) /* ARC/DFE core */
++#define LTQ_RCU_RD_AHB (1 << 6) /* AHB bus */
++#define LTQ_RCU_RD_USB (1 << 4) /* USB and Phy core */
++#define LTQ_RCU_RD_FPI (1 << 2) /* FPI bus */
++#define LTQ_RCU_RD_CPU0 (1 << 1) /* CPU0 subsystem */
++#define LTQ_RCU_RD_HRST (1 << 0) /* HW reset via HRST pin */
++
++#define LTQ_RCU_STAT_BOOT_SHIFT 17
++#define LTQ_RCU_STAT_BOOT_MASK (0xf << LTQ_RCU_STAT_BOOT_SHIFT)
++
++struct ltq_rcu_regs {
++ u32 rsvd0[4];
++ __be32 req; /* Reset request */
++ __be32 stat; /* Reset status */
++ __be32 usb0_cfg; /* USB0 config */
++ u32 rsvd1[2];
++ __be32 pci_rdy; /* PCI boot ready */
++ __be32 ppe_conf; /* PPE config */
++ u32 rsvd2;
++ __be32 usb1_cfg; /* USB1 config */
++};
++
++static struct ltq_rcu_regs *ltq_rcu_regs =
++ (struct ltq_rcu_regs *) CKSEG1ADDR(LTQ_RCU_BASE);
++
++u32 ltq_reset_map(enum ltq_reset_modules module)
++{
++ u32 val;
++
++ switch (module) {
++ case LTQ_RESET_CORE:
++ case LTQ_RESET_SOFT:
++ val = LTQ_RCU_RD_SRST | LTQ_RCU_RD_CPU0;
++ break;
++ case LTQ_RESET_DMA:
++ val = LTQ_RCU_RD_DMA;
++ break;
++ case LTQ_RESET_ETH:
++ val = LTQ_RCU_RD_PPE | LTQ_RCU_RD_ETHSW;
++ break;
++ case LTQ_RESET_HARD:
++ val = LTQ_RCU_RD_HRST;
++ break;
++ default:
++ val = 0;
++ break;
++ }
++
++ return val;
++}
++
++int ltq_reset_activate(enum ltq_reset_modules module)
++{
++ u32 val;
++
++ val = ltq_reset_map(module);
++ if (unlikely(!val))
++ return 1;
++
++ ltq_setbits(&ltq_rcu_regs->req, val);
++
++ return 0;
++}
++
++int ltq_reset_deactivate(enum ltq_reset_modules module)
++{
++ u32 val;
++
++ val = ltq_reset_map(module);
++ if (unlikely(!val))
++ return 1;
++
++ ltq_clrbits(&ltq_rcu_regs->req, val);
++
++ return 0;
++}
++
++enum ltq_boot_select ltq_boot_select(void)
++{
++ u32 stat;
++ unsigned int bootstrap;
++
++ stat = ltq_readl(&ltq_rcu_regs->stat);
++ bootstrap = (stat & LTQ_RCU_STAT_BOOT_MASK) >> LTQ_RCU_STAT_BOOT_SHIFT;
++
++ switch (bootstrap) {
++ case 0:
++ return BOOT_NOR_NO_BOOTROM;
++ case 1:
++ return BOOT_RGMII0;
++ case 2:
++ return BOOT_NOR;
++ case 3:
++ return BOOT_MII0;
++ case 5:
++ return BOOT_RMII0;
++ case 6:
++ return BOOT_PCI;
++ case 8:
++ return BOOT_UART;
++ case 10:
++ return BOOT_SPI;
++ default:
++ return BOOT_UNKNOWN;
++ }
++}
+diff --git a/arch/mips/cpu/mips32/lantiq-common/cpu.c b/arch/mips/cpu/mips32/lantiq-common/cpu.c
+index 4a7acdf..aa37b35 100644
+--- a/arch/mips/cpu/mips32/lantiq-common/cpu.c
++++ b/arch/mips/cpu/mips32/lantiq-common/cpu.c
+@@ -20,6 +20,7 @@ static const char ltq_bootsel_strings[][16] = {
+ "PCI",
+ "MII0",
+ "RMII0",
++ "RGMII0",
+ "RGMII1",
+ "unknown",
+ };
+diff --git a/arch/mips/cpu/mips32/lantiq-common/start.S b/arch/mips/cpu/mips32/lantiq-common/start.S
+index 481d739..fc8276e 100644
+--- a/arch/mips/cpu/mips32/lantiq-common/start.S
++++ b/arch/mips/cpu/mips32/lantiq-common/start.S
+@@ -64,6 +64,11 @@
+ #define STATUS_LANTIQ (STATUS_MIPS24K | STATUS_MIPS32_64)
+ #endif
+
++#ifdef CONFIG_SOC_XWAY_ARX100
++#define CONFIG0_LANTIQ (CONFIG0_MIPS34K | CONFIG0_MIPS32_64)
++#define STATUS_LANTIQ (STATUS_MIPS34K | STATUS_MIPS32_64)
++#endif
++
+ #ifdef CONFIG_SOC_XWAY_VRX200
+ #define CONFIG0_LANTIQ (CONFIG0_MIPS34K | CONFIG0_MIPS32_64)
+ #define STATUS_LANTIQ (STATUS_MIPS34K | STATUS_MIPS32_64)
+diff --git a/arch/mips/include/asm/arch-arx100/config.h b/arch/mips/include/asm/arch-arx100/config.h
+new file mode 100644
+index 0000000..1a6c9bc
+--- /dev/null
++++ b/arch/mips/include/asm/arch-arx100/config.h
+@@ -0,0 +1,175 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ *
++ * Common board configuration for Lantiq XWAY ARX100 family
++ *
++ * Use following defines in your board config to enable specific features
++ * and drivers for this SoC:
++ *
++ * CONFIG_LTQ_SUPPORT_UART
++ * - support the Danube ASC/UART interface and console
++ *
++ * CONFIG_LTQ_SUPPORT_NOR_FLASH
++ * - support a parallel NOR flash via the CFI interface in flash bank 0
++ *
++ * CONFIG_LTQ_SUPPORT_ETHERNET
++ * - support the Danube ETOP and MAC interface
++ *
++ * CONFIG_LTQ_SUPPORT_SPI_FLASH
++ * - support the Danube SPI interface and serial flash drivers
++ * - specific SPI flash drivers must be configured separately
++ */
++
++#ifndef __ARX100_CONFIG_H__
++#define __ARX100_CONFIG_H__
++
++/* CPU and SoC type */
++#define CONFIG_SOC_LANTIQ
++#define CONFIG_SOC_XWAY_ARX100
++
++/* Cache configuration */
++#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
++#define CONFIG_SYS_DCACHE_SIZE (16 * 1024)
++#define CONFIG_SYS_ICACHE_SIZE (32 * 1024)
++#define CONFIG_SYS_CACHELINE_SIZE 32
++#define CONFIG_SYS_MIPS_CACHE_EXT_INIT
++
++/*
++ * Supported clock modes
++ * PLL0: rational PLL running at 500 MHz
++ * PLL1: fractional PLL running at 393.219 MHz
++ */
++#define LTQ_CLK_CPU_393_DDR_197 0
++#define LTQ_CLK_CPU_197_DDR_197 1
++#define LTQ_CLK_CPU_333_DDR_167 2
++#define LTQ_CLK_CPU_167_DDR_167 3
++#define LTQ_CLK_CPU_131_DDR_131 4
++#define LTQ_CLK_CPU_111_DDR_111 5
++
++/* CPU speed */
++#define CONFIG_SYS_CLOCK_MODE LTQ_CLK_CPU_333_DDR_167
++#define CONFIG_SYS_MIPS_TIMER_FREQ 166666667
++#define CONFIG_SYS_HZ 1000
++
++/* RAM */
++#define CONFIG_NR_DRAM_BANKS 1
++#define CONFIG_SYS_SDRAM_BASE 0x80000000
++#define CONFIG_SYS_SDRAM_BASE_UC 0xa0000000
++#define CONFIG_SYS_MEMTEST_START 0x81000000
++#define CONFIG_SYS_MEMTEST_END 0x82000000
++#define CONFIG_SYS_LOAD_ADDR 0x81000000
++#define CONFIG_SYS_INIT_SP_OFFSET (32 * 1024)
++
++/* SRAM */
++#define CONFIG_SYS_SRAM_BASE 0xBE1A0000
++#define CONFIG_SYS_SRAM_SIZE 0x10000
++
++/* ASC/UART driver and console */
++#define CONFIG_LANTIQ_SERIAL
++#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++/* GPIO */
++#define CONFIG_LANTIQ_GPIO
++#define CONFIG_LTQ_GPIO_MAX_BANKS 3
++#define CONFIG_LTQ_HAS_GPIO_BANK3
++
++/* FLASH driver */
++#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
++#define CONFIG_SYS_MAX_FLASH_BANKS 1
++#define CONFIG_SYS_MAX_FLASH_SECT 256
++#define CONFIG_SYS_FLASH_BASE 0xB0000000
++#define CONFIG_FLASH_16BIT
++#define CONFIG_SYS_FLASH_CFI
++#define CONFIG_FLASH_CFI_DRIVER
++#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
++#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
++#define CONFIG_FLASH_SHOW_PROGRESS 50
++#define CONFIG_SYS_FLASH_PROTECTION
++#define CONFIG_CFI_FLASH_USE_WEAK_ADDR_SWAP
++
++#define CONFIG_CMD_FLASH
++#else
++#define CONFIG_SYS_NO_FLASH
++#endif /* CONFIG_NOR_FLASH */
++
++#if defined(CONFIG_LTQ_SUPPORT_SPI_FLASH)
++#define CONFIG_LANTIQ_SPI
++#define CONFIG_SPI_FLASH
++
++#define CONFIG_CMD_SF
++#define CONFIG_CMD_SPI
++#endif
++
++#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
++#define CONFIG_NAND_LANTIQ
++#define CONFIG_SYS_MAX_NAND_DEVICE 1
++#define CONFIG_SYS_NAND_BASE 0xB4000000
++
++#define CONFIG_CMD_NAND
++#endif
++
++#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
++#define CONFIG_LANTIQ_DMA
++#define CONFIG_LANTIQ_ARX100_SWITCH
++
++#define CONFIG_PHYLIB
++#define CONFIG_MII
++#define CONFIG_UDP_CHECKSUM
++
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NET
++#endif
++
++#define CONFIG_SPL_MAX_SIZE (32 * 1024)
++#define CONFIG_SPL_BSS_MAX_SIZE (8 * 1024)
++#define CONFIG_SPL_STACK_MAX_SIZE (8 * 1024)
++#define CONFIG_SPL_MALLOC_MAX_SIZE (32 * 1024)
++#define CONFIG_SPL_STACK_BSS_IN_SRAM
++
++#if defined(CONFIG_SPL_STACK_BSS_IN_SRAM)
++#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SRAM_BASE + \
++ CONFIG_SPL_MAX_SIZE + \
++ CONFIG_SPL_STACK_MAX_SIZE - 1)
++#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
++#define CONFIG_SPL_MALLOC_BASE (CONFIG_SYS_SDRAM_BASE + \
++ CONFIG_SYS_INIT_SP_OFFSET)
++#else
++#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SDRAM_BASE + \
++ CONFIG_SYS_INIT_SP_OFFSET + \
++ CONFIG_SPL_STACK_MAX_SIZE - 1)
++#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
++#define CONFIG_SPL_MALLOC_BASE (CONFIG_SPL_BSS_BASE + \
++ CONFIG_SPL_BSS_MAX_SIZE)
++#endif
++
++#if defined(CONFIG_SYS_BOOT_RAM)
++#define CONFIG_SYS_TEXT_BASE 0xA0100000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#endif
++
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_SYS_TEXT_BASE 0xB0000000
++#endif
++
++#if defined(CONFIG_SYS_BOOT_SFSPL) || defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_SYS_TEXT_BASE 0x80100000
++#define CONFIG_SPL_TEXT_BASE 0xBE1A0000
++#endif
++
++#if defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_SYS_TEXT_BASE 0x80100000
++#define CONFIG_SPL_TEXT_BASE 0xB0000000
++#endif
++
++#if defined(CONFIG_SYS_BOOT_NOR) || defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x688C688C
++#define CONFIG_XWAY_SWAP_BYTES
++#endif
++
++#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
++
++#endif /* __ARX100_CONFIG_H__ */
+diff --git a/arch/mips/include/asm/arch-arx100/gpio.h b/arch/mips/include/asm/arch-arx100/gpio.h
+new file mode 100644
+index 0000000..f6b6409
+--- /dev/null
++++ b/arch/mips/include/asm/arch-arx100/gpio.h
+@@ -0,0 +1,12 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __ARX100_GPIO_H__
++#define __ARX100_GPIO_H__
++
++#include <asm/lantiq/gpio.h>
++
++#endif /* __ARX100_GPIO_H__ */
+diff --git a/arch/mips/include/asm/arch-arx100/nand.h b/arch/mips/include/asm/arch-arx100/nand.h
+new file mode 100644
+index 0000000..231b68f
+--- /dev/null
++++ b/arch/mips/include/asm/arch-arx100/nand.h
+@@ -0,0 +1,13 @@
++/*
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __VRX200_NAND_H__
++#define __VRX200_NAND_H__
++
++struct nand_chip;
++int ltq_nand_init(struct nand_chip *nand);
++
++#endif /* __VRX200_NAND_H__ */
+diff --git a/arch/mips/include/asm/arch-arx100/soc.h b/arch/mips/include/asm/arch-arx100/soc.h
+new file mode 100644
+index 0000000..3ccaf3f
+--- /dev/null
++++ b/arch/mips/include/asm/arch-arx100/soc.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __ARX100_SOC_H__
++#define __ARX100_SOC_H__
++
++#define LTQ_ASC0_BASE 0x1E100400
++#define LTQ_SPI_BASE 0x1E100800
++#define LTQ_GPIO_BASE 0x1E100B00
++#define LTQ_SSIO_BASE 0x1E100BB0
++#define LTQ_ASC1_BASE 0x1E100C00
++#define LTQ_DMA_BASE 0x1E104100
++
++#define LTQ_EBU_BASE 0x1E105300
++#define LTQ_EBU_REGION0_BASE 0x10000000
++#define LTQ_EBU_REGION1_BASE 0x14000000
++#define LTQ_EBU_NAND_BASE (LTQ_EBU_BASE + 0xB0)
++
++#define LTQ_PPE_BASE 0x1E180000
++#define LTQ_SWITCH_BASE 0x1E108000
++
++#define LTQ_PMU_BASE 0x1F102000
++#define LTQ_CGU_BASE 0x1F103000
++#define LTQ_MPS_BASE 0x1F107000
++#define LTQ_CHIPID_BASE (LTQ_MPS_BASE + 0x340)
++#define LTQ_RCU_BASE 0x1F203000
++
++#define LTQ_MC_GEN_BASE 0x1F800000
++#define LTQ_MC_SDR_BASE 0x1F800200
++#define LTQ_MC_DDR_BASE 0x1F801000
++#define LTQ_MC_DDR_DC_OFFSET(x) (x * 0x10)
++
++#endif /* __ARX100_SOC_H__ */
+diff --git a/arch/mips/include/asm/lantiq/chipid.h b/arch/mips/include/asm/lantiq/chipid.h
+index c9921b0..19adf97 100644
+--- a/arch/mips/include/asm/lantiq/chipid.h
++++ b/arch/mips/include/asm/lantiq/chipid.h
+@@ -15,6 +15,10 @@ enum ltq_chip_partnum {
+ LTQ_SOC_DANUBE = 0x0129,
+ LTQ_SOC_DANUBE_S = 0x012B,
+ LTQ_SOC_TWINPASS = 0x012D,
++ LTQ_SOC_ARX188 = 0x016C, /* ARX188 */
++ LTQ_SOC_ARX186 = 0x016D, /* ARX186 v1.1 */
++ LTQ_SOC_ARX186_2 = 0x016E, /* ARX186 v1.2 */
++ LTQ_SOC_ARX182 = 0x016F, /* ARX182 */
+ LTQ_SOC_VRX288 = 0x01C0, /* VRX288 v1.1 */
+ LTQ_SOC_VRX268 = 0x01C2, /* VRX268 v1.1 */
+ LTQ_SOC_GRX288 = 0x01C9, /* GRX288 v1.1 */
+@@ -38,6 +42,38 @@ static inline int ltq_soc_is_danube(void)
+ }
+ #endif
+
++#ifdef CONFIG_SOC_XWAY_ARX100
++static inline int ltq_soc_is_arx100(void)
++{
++ return 1;
++}
++
++static inline int ltq_soc_is_arx100_v1(void)
++{
++ return ltq_chip_version_get() == 1;
++}
++
++static inline int ltq_soc_is_arx100_v2(void)
++{
++ return ltq_chip_version_get() == 2;
++}
++#else
++static inline int ltq_soc_is_arx100(void)
++{
++ return 0;
++}
++
++static inline int ltq_soc_is_arx100_v1(void)
++{
++ return 0;
++}
++
++static inline int ltq_soc_is_arx100_v2(void)
++{
++ return 0;
++}
++#endif
++
+ #ifdef CONFIG_SOC_XWAY_VRX200
+ static inline int ltq_soc_is_vrx200(void)
+ {
+diff --git a/arch/mips/include/asm/lantiq/clk.h b/arch/mips/include/asm/lantiq/clk.h
+index e13f000..5aea603 100644
+--- a/arch/mips/include/asm/lantiq/clk.h
++++ b/arch/mips/include/asm/lantiq/clk.h
+@@ -13,9 +13,10 @@ enum ltq_clk {
+ CLOCK_83_MHZ = 83333333,
+ CLOCK_111_MHZ = 111111111,
+ CLOCK_125_MHZ = 125000000,
++ CLOCK_131_MHZ = 131073000,
+ CLOCK_133_MHZ = 133333333,
+ CLOCK_166_MHZ = 166666667,
+- CLOCK_197_MHZ = 197000000,
++ CLOCK_197_MHZ = 196609500,
+ CLOCK_333_MHZ = 333333333,
+ CLOCK_393_MHZ = 393219000,
+ CLOCK_500_MHZ = 500000000,
+diff --git a/arch/mips/include/asm/lantiq/cpu.h b/arch/mips/include/asm/lantiq/cpu.h
+index b3a504e..e3b0312 100644
+--- a/arch/mips/include/asm/lantiq/cpu.h
++++ b/arch/mips/include/asm/lantiq/cpu.h
+@@ -17,6 +17,7 @@ enum ltq_boot_select {
+ BOOT_PCI,
+ BOOT_MII0,
+ BOOT_RMII0,
++ BOOT_RGMII0,
+ BOOT_RGMII1,
+ BOOT_UNKNOWN,
+ };
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0015-sf-macronix-add-support-for-MX66L51235L.patch b/package/boot/uboot-lantiq/patches/0015-sf-macronix-add-support-for-MX66L51235L.patch
deleted file mode 100644
index fbc22e4..0000000
--- a/package/boot/uboot-lantiq/patches/0015-sf-macronix-add-support-for-MX66L51235L.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From a2d80b6b91ac63beea31455ce8d136230c030500 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Wed, 7 Nov 2012 15:14:40 +0100
-Subject: sf: macronix: add support for MX66L51235L
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/macronix.c
-+++ b/drivers/mtd/spi/macronix.c
-@@ -84,6 +84,11 @@ static const struct macronix_spi_flash_p
- .nr_blocks = 512,
- .name = "MX25L25635E",
- },
-+ {
-+ .idcode = 0x201A,
-+ .nr_blocks = 1024,
-+ .name = "MX66L51235L",
-+ },
- };
-
- static __maybe_unused int macronix_set_4byte_mode(struct spi_flash *flash)
diff --git a/package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch b/package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch
new file mode 100644
index 0000000..de1ecd2
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0016-net-add-driver-for-Lantiq-XWAY-ARX100-switch.patch
@@ -0,0 +1,559 @@
+From 7288414298b34dcda1216fee1fe38d05ea0027a2 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 17 Dec 2012 23:32:39 +0100
+Subject: net: add driver for Lantiq XWAY ARX100 switch
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/arch/mips/include/asm/arch-arx100/config.h b/arch/mips/include/asm/arch-arx100/config.h
+index 1a6c9bc..8f955e8 100644
+--- a/arch/mips/include/asm/arch-arx100/config.h
++++ b/arch/mips/include/asm/arch-arx100/config.h
+@@ -10,17 +10,21 @@
+ * and drivers for this SoC:
+ *
+ * CONFIG_LTQ_SUPPORT_UART
+- * - support the Danube ASC/UART interface and console
++ * - support the ARX100 ASC/UART interface and console
+ *
+ * CONFIG_LTQ_SUPPORT_NOR_FLASH
+ * - support a parallel NOR flash via the CFI interface in flash bank 0
+ *
+ * CONFIG_LTQ_SUPPORT_ETHERNET
+- * - support the Danube ETOP and MAC interface
++ * - support the ARX100 ETOP and MAC interface
+ *
+ * CONFIG_LTQ_SUPPORT_SPI_FLASH
+- * - support the Danube SPI interface and serial flash drivers
++ * - support the ARX100 SPI interface and serial flash drivers
+ * - specific SPI flash drivers must be configured separately
++ *
++ * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH
++ * - build a preloader that runs in the internal SRAM and loads
++ * the U-Boot from SPI flash into RAM
+ */
+
+ #ifndef __ARX100_CONFIG_H__
+diff --git a/arch/mips/include/asm/arch-arx100/switch.h b/arch/mips/include/asm/arch-arx100/switch.h
+new file mode 100644
+index 0000000..301056c
+--- /dev/null
++++ b/arch/mips/include/asm/arch-arx100/switch.h
+@@ -0,0 +1,86 @@
++/*
++ * Copyright (C) 2012-2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __ARX100_SWITCH_H__
++#define __ARX100_SWITCH_H__
++
++struct ar9_switch_regs {
++ __be32 ps; /* Port status*/
++ __be32 p0_ctl; /* Port 0 control */
++ __be32 p1_ctl; /* Port 1 control */
++ __be32 p2_ctl; /* Port 2 control */
++ __be32 p0_vlan; /* Port 0 VLAN control */
++ __be32 p1_vlan; /* Port 1 VLAN control */
++ __be32 p2_vlan; /* Port 2 VLAN control */
++ __be32 p0_inctl; /* Port 0 ingress control */
++ __be32 p1_inctl; /* Port 1 ingress control */
++ __be32 p2_inctl; /* Port 2 ingress control */
++ u32 rsvd0[16];
++ __be32 sw_gctl0; /* Switch global control 0 */
++ __be32 sw_gctl1; /* Switch global control 1 */
++ __be32 arp; /* ARP/RARP */
++ __be32 strm_ctl; /* Storm control */
++ __be32 rgmii_ctl; /* RGMII/GMII port control */
++ u32 rsvd1[4];
++ __be32 pmac_hd_ctl; /* PMAC header control */
++ u32 rsvd2[15];
++ __be32 mdio_ctrl; /* MDIO indirect access control */
++ __be32 mdio_data; /* MDIO indirect read data */
++};
++
++#define BUILD_CHECK_AR9_REG(name, offset) \
++ BUILD_BUG_ON(offsetof(struct ar9_switch_regs, name) != (offset))
++
++static inline void build_check_ar9_registers(void)
++{
++ BUILD_CHECK_AR9_REG(sw_gctl0, 0x68);
++ BUILD_CHECK_AR9_REG(rgmii_ctl, 0x78);
++ BUILD_CHECK_AR9_REG(pmac_hd_ctl, 0x8c);
++ BUILD_CHECK_AR9_REG(mdio_ctrl, 0xcc);
++ BUILD_CHECK_AR9_REG(mdio_data, 0xd0);
++}
++
++#define P0_CTL_FLP (1 << 18)
++#define P0_CTL_FLD (1 << 17)
++
++#define SW_GCTL0_SE (1 << 31)
++
++#define RGMII_CTL_P1_SHIFT 10
++#define RGMII_CTL_P1_MASK (0x3FF << RGMII_CTL_P1_SHIFT)
++#define RGMII_CTL_P0_MASK 0x3FF
++#define RGMII_CTL_P0IS_SHIFT 8
++#define RGMII_CTL_P0IS_RGMII (0x0 << RGMII_CTL_P0IS_SHIFT)
++#define RGMII_CTL_P0IS_MII (0x1 << RGMII_CTL_P0IS_SHIFT)
++#define RGMII_CTL_P0IS_REVMII (0x2 << RGMII_CTL_P0IS_SHIFT)
++#define RGMII_CTL_P0IS_RMII (0x3 << RGMII_CTL_P0IS_SHIFT)
++#define RGMII_CTL_P0RDLY_SHIFT 6
++#define RGMII_CTL_P0RDLY_0_0 (0x0 << RGMII_CTL_P0RDLY_SHIFT)
++#define RGMII_CTL_P0RDLY_1_5 (0x1 << RGMII_CTL_P0RDLY_SHIFT)
++#define RGMII_CTL_P0RDLY_1_75 (0x2 << RGMII_CTL_P0RDLY_SHIFT)
++#define RGMII_CTL_P0RDLY_2_0 (0x3 << RGMII_CTL_P0RDLY_SHIFT)
++#define RGMII_CTL_P0TDLY_SHIFT 4
++#define RGMII_CTL_P0TDLY_0_0 (0x0 << RGMII_CTL_P0TDLY_SHIFT)
++#define RGMII_CTL_P0TDLY_1_5 (0x1 << RGMII_CTL_P0TDLY_SHIFT)
++#define RGMII_CTL_P0TDLY_1_75 (0x2 << RGMII_CTL_P0TDLY_SHIFT)
++#define RGMII_CTL_P0TDLY_2_0 (0x3 << RGMII_CTL_P0TDLY_SHIFT)
++#define RGMII_CTL_P0SPD_SHIFT 2
++#define RGMII_CTL_P0SPD_10 (0x0 << RGMII_CTL_P0SPD_SHIFT)
++#define RGMII_CTL_P0SPD_100 (0x1 << RGMII_CTL_P0SPD_SHIFT)
++#define RGMII_CTL_P0SPD_1000 (0x2 << RGMII_CTL_P0SPD_SHIFT)
++#define RGMII_CTL_P0DUP_FULL (1 << 1)
++#define RGMII_CTL_P0FCE_EN (1 << 0)
++
++#define PMAC_HD_CTL_AC (1 << 18)
++
++#define MDIO_CTRL_WD_SHIFT 16
++#define MDIO_CTRL_MBUSY (1 << 15)
++#define MDIO_CTRL_OP_READ (1 << 11)
++#define MDIO_CTRL_OP_WRITE (1 << 10)
++#define MDIO_CTRL_PHYAD_SHIFT 5
++#define MDIO_CTRL_PHYAD_MASK (0x1f << MDIO_CTRL_PHYAD_SHIFT)
++#define MDIO_CTRL_REGAD_MASK 0x1f
++
++#endif /* __ARX100_SWITCH_H__ */
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index bbc2c92..926b8c2 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -38,6 +38,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
+ COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o
+ COBJS-$(CONFIG_LAN91C96) += lan91c96.o
+ COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o
++COBJS-$(CONFIG_LANTIQ_ARX100_SWITCH) += lantiq_arx100_switch.o
+ COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o
+ COBJS-$(CONFIG_MACB) += macb.o
+ COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
+diff --git a/drivers/net/lantiq_arx100_switch.c b/drivers/net/lantiq_arx100_switch.c
+new file mode 100644
+index 0000000..cc65249
+--- /dev/null
++++ b/drivers/net/lantiq_arx100_switch.c
+@@ -0,0 +1,410 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++#define DEBUG
++#include <common.h>
++#include <malloc.h>
++#include <netdev.h>
++#include <miiphy.h>
++#include <switch.h>
++#include <linux/compiler.h>
++#include <asm/gpio.h>
++#include <asm/processor.h>
++#include <asm/lantiq/io.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/pm.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/dma.h>
++#include <asm/arch/soc.h>
++#include <asm/arch/switch.h>
++
++#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
++#define LTQ_ETH_TX_BUFFER_CNT 8
++#define LTQ_ETH_RX_DATA_SIZE PKTSIZE_ALIGN
++#define LTQ_ETH_IP_ALIGN 2
++
++#define LTQ_MDIO_DRV_NAME "ltq-mdio"
++#define LTQ_ETH_DRV_NAME "ltq-eth"
++
++#define LTQ_ETHSW_MAX_GMAC 2
++#define LTQ_ETHSW_PMAC 2
++
++struct ltq_eth_priv {
++ struct ltq_dma_device dma_dev;
++ struct mii_dev *bus;
++ struct eth_device *dev;
++ struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
++ int rx_num;
++ int tx_num;
++};
++
++static struct ar9_switch_regs *switch_regs =
++ (struct ar9_switch_regs *) CKSEG1ADDR(LTQ_SWITCH_BASE);
++
++static int ltq_mdio_is_busy(void)
++{
++ u32 mdio_ctrl = ltq_readl(&switch_regs->mdio_ctrl);
++
++ return mdio_ctrl & MDIO_CTRL_MBUSY;
++}
++
++static void ltq_mdio_poll(void)
++{
++ while (ltq_mdio_is_busy())
++ cpu_relax();
++
++ __udelay(1000);
++}
++
++static int ltq_mdio_read(struct mii_dev *bus, int phyad, int devad,
++ int regad)
++{
++ u32 mdio_ctrl;
++ int retval;
++
++ mdio_ctrl = MDIO_CTRL_MBUSY | MDIO_CTRL_OP_READ |
++ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
++ (regad & MDIO_CTRL_REGAD_MASK);
++
++ ltq_mdio_poll();
++ ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
++ ltq_mdio_poll();
++ retval = ltq_readl(&switch_regs->mdio_data);
++ ltq_writel(&switch_regs->mdio_data, 0xFFFF);
++
++ debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, retval);
++
++ return retval;
++}
++
++static int ltq_mdio_write(struct mii_dev *bus, int phyad, int devad,
++ int regad, u16 val)
++{
++ u32 mdio_ctrl;
++
++ debug("%s: phyad %02x, regad %02x, val %02x\n", __func__, phyad, regad, val);
++
++ mdio_ctrl = (val << MDIO_CTRL_WD_SHIFT) | MDIO_CTRL_MBUSY |
++ MDIO_CTRL_OP_WRITE |
++ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
++ (regad & MDIO_CTRL_REGAD_MASK);
++
++ ltq_mdio_poll();
++ ltq_writel(&switch_regs->mdio_ctrl, mdio_ctrl);
++
++ return 0;
++}
++
++static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
++{
++}
++
++static inline u8 *ltq_eth_rx_packet_align(int rx_num)
++{
++ u8 *packet = (u8 *) NetRxPackets[rx_num];
++
++ /*
++ * IP header needs
++ */
++ return packet + LTQ_ETH_IP_ALIGN;
++}
++
++static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
++{
++ struct ltq_eth_priv *priv = dev->priv;
++ struct ltq_dma_device *dma_dev = &priv->dma_dev;
++ struct phy_device *phydev;
++ int i;
++
++ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
++ phydev = priv->phymap[i];
++ if (!phydev)
++ continue;
++
++ phy_startup(phydev);
++ ltq_eth_gmac_update(phydev, i);
++ }
++
++ for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++)
++ ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i),
++ LTQ_ETH_RX_DATA_SIZE);
++
++ ltq_dma_enable(dma_dev);
++
++ priv->rx_num = 0;
++ priv->tx_num = 0;
++
++ return 0;
++}
++
++static void ltq_eth_halt(struct eth_device *dev)
++{
++ struct ltq_eth_priv *priv = dev->priv;
++ struct ltq_dma_device *dma_dev = &priv->dma_dev;
++ struct phy_device *phydev;
++ int i;
++
++ ltq_dma_reset(dma_dev);
++
++ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
++ phydev = priv->phymap[i];
++ if (!phydev)
++ continue;
++
++ phy_shutdown(phydev);
++ phydev->link = 0;
++ ltq_eth_gmac_update(phydev, i);
++ }
++}
++
++static int ltq_eth_send(struct eth_device *dev, void *packet, int length)
++{
++ struct ltq_eth_priv *priv = dev->priv;
++ struct ltq_dma_device *dma_dev = &priv->dma_dev;
++ int err;
++
++ err = ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10);
++ if (err) {
++ puts("NET: timeout on waiting for TX descriptor\n");
++ return -1;
++ }
++
++ priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT;
++
++ return err;
++}
++
++static int ltq_eth_recv(struct eth_device *dev)
++{
++ struct ltq_eth_priv *priv = dev->priv;
++ struct ltq_dma_device *dma_dev = &priv->dma_dev;
++ u8 *packet;
++ int len;
++
++ if (!ltq_dma_rx_poll(dma_dev, priv->rx_num))
++ return 0;
++
++#if 0
++ printf("%s: rx_num %d\n", __func__, priv->rx_num);
++#endif
++
++ len = ltq_dma_rx_length(dma_dev, priv->rx_num);
++ packet = ltq_eth_rx_packet_align(priv->rx_num);
++
++#if 0
++ printf("%s: received: packet %p, len %u, rx_num %d\n",
++ __func__, packet, len, priv->rx_num);
++#endif
++
++ if (len)
++ NetReceive(packet, len);
++
++ ltq_dma_rx_map(dma_dev, priv->rx_num, packet,
++ LTQ_ETH_RX_DATA_SIZE);
++
++ priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT;
++
++ return 0;
++}
++
++static void ltq_eth_pmac_init(void)
++{
++ /* Add CRC to packets from DMA to PMAC */
++ ltq_setbits(&switch_regs->pmac_hd_ctl, PMAC_HD_CTL_AC);
++
++ /* Force link up */
++ ltq_setbits(&switch_regs->p2_ctl, P0_CTL_FLP);
++}
++
++static void ltq_eth_hw_init(const struct ltq_eth_port_config *port)
++{
++ /* Power up ethernet subsystems */
++ ltq_pm_enable(LTQ_PM_ETH);
++
++ /* Enable switch core */
++ ltq_setbits(&switch_regs->sw_gctl0, SW_GCTL0_SE);
++
++ /* MII/MDIO */
++ gpio_set_altfunc(42, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* MII/MDC */
++ gpio_set_altfunc(43, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++
++ ltq_eth_pmac_init();
++}
++
++static void ltq_eth_port_config(struct ltq_eth_priv *priv,
++ const struct ltq_eth_port_config *port)
++{
++ struct phy_device *phydev;
++ struct switch_device *sw;
++ u32 rgmii_ctl;
++ unsigned int port_ctl, port_xmii = 0;
++
++ if (port->num > 1)
++ return;
++
++ rgmii_ctl = ltq_readl(&switch_regs->rgmii_ctl);
++
++ if (port->num == 1)
++ port_ctl = ltq_readl(&switch_regs->p1_ctl);
++ else
++ port_ctl = ltq_readl(&switch_regs->p0_ctl);
++
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_RGMII:
++ port_xmii = RGMII_CTL_P0IS_RGMII;
++
++ switch (port->rgmii_tx_delay) {
++ case 1:
++ port_xmii |= RGMII_CTL_P0TDLY_1_5;
++ break;
++ case 2:
++ port_xmii |= RGMII_CTL_P0TDLY_1_75;
++ break;
++ case 3:
++ port_xmii |= RGMII_CTL_P0TDLY_2_0;
++ break;
++ default:
++ break;
++ }
++
++ switch (port->rgmii_rx_delay) {
++ case 1:
++ port_xmii |= RGMII_CTL_P0RDLY_1_5;
++ break;
++ case 2:
++ port_xmii |= RGMII_CTL_P0RDLY_1_75;
++ break;
++ case 3:
++ port_xmii |= RGMII_CTL_P0RDLY_2_0;
++ break;
++ default:
++ break;
++ }
++
++ if (!(port->flags & LTQ_ETH_PORT_PHY)) {
++ port_xmii |= (RGMII_CTL_P0SPD_1000 |
++ RGMII_CTL_P0DUP_FULL);
++ port_ctl |= P0_CTL_FLP;
++ }
++
++ break;
++ case PHY_INTERFACE_MODE_MII:
++ port_xmii = RGMII_CTL_P0IS_MII;
++
++ if (!(port->flags & LTQ_ETH_PORT_PHY)) {
++ port_xmii |= (RGMII_CTL_P0SPD_100 |
++ RGMII_CTL_P0DUP_FULL);
++ port_ctl |= P0_CTL_FLP;
++ }
++
++ break;
++ default:
++ break;
++ }
++
++ if (port->num == 1) {
++ ltq_writel(&switch_regs->p1_ctl, port_ctl);
++
++ rgmii_ctl &= ~RGMII_CTL_P1_MASK;
++ rgmii_ctl |= (port_xmii << RGMII_CTL_P1_SHIFT);
++ } else {
++ ltq_writel(&switch_regs->p0_ctl, port_ctl);
++
++ rgmii_ctl &= ~RGMII_CTL_P0_MASK;
++ rgmii_ctl |= port_xmii;
++ }
++
++ ltq_writel(&switch_regs->rgmii_ctl, rgmii_ctl);
++
++ /* Connect to external switch */
++ if (port->flags & LTQ_ETH_PORT_SWITCH) {
++ sw = switch_connect(priv->bus);
++ if (sw)
++ switch_setup(sw);
++ }
++
++ /* Connect to internal/external PHYs */
++ if (port->flags & LTQ_ETH_PORT_PHY) {
++ phydev = phy_connect(priv->bus, port->phy_addr, priv->dev,
++ port->phy_if);
++ if (phydev)
++ phy_config(phydev);
++
++ priv->phymap[port->num] = phydev;
++ }
++}
++
++int ltq_eth_initialize(const struct ltq_eth_board_config *board_config)
++{
++ struct eth_device *dev;
++ struct mii_dev *bus;
++ struct ltq_eth_priv *priv;
++ struct ltq_dma_device *dma_dev;
++ const struct ltq_eth_port_config *port = &board_config->ports[0];
++ int i, ret;
++
++ build_check_ar9_registers();
++
++ ltq_dma_init();
++ ltq_eth_hw_init(port);
++
++ dev = calloc(1, sizeof(*dev));
++ if (!dev)
++ return -1;
++
++ priv = calloc(1, sizeof(*priv));
++ if (!priv)
++ return -1;
++
++ bus = mdio_alloc();
++ if (!bus)
++ return -1;
++
++ sprintf(dev->name, LTQ_ETH_DRV_NAME);
++ dev->priv = priv;
++ dev->init = ltq_eth_init;
++ dev->halt = ltq_eth_halt;
++ dev->recv = ltq_eth_recv;
++ dev->send = ltq_eth_send;
++
++ sprintf(bus->name, LTQ_MDIO_DRV_NAME);
++ bus->read = ltq_mdio_read;
++ bus->write = ltq_mdio_write;
++ bus->priv = priv;
++
++ dma_dev = &priv->dma_dev;
++ dma_dev->port = 0;
++ dma_dev->rx_chan.chan_no = 0;
++ dma_dev->rx_chan.class = 0;
++ dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT;
++ dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
++ dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS;
++ dma_dev->tx_chan.chan_no = 1;
++ dma_dev->tx_chan.class = 0;
++ dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT;
++ dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
++ dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS;
++
++ priv->bus = bus;
++ priv->dev = dev;
++
++ ret = ltq_dma_register(dma_dev);
++ if (ret)
++ return ret;
++
++ ret = mdio_register(bus);
++ if (ret)
++ return ret;
++
++ ret = eth_register(dev);
++ if (ret)
++ return ret;
++
++ for (i = 0; i < board_config->num_ports; i++)
++ ltq_eth_port_config(priv, &board_config->ports[i]);
++
++ return 0;
++}
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0016-sf-add-MTD-layer-driver-for-SPI-flash-devices.patch b/package/boot/uboot-lantiq/patches/0016-sf-add-MTD-layer-driver-for-SPI-flash-devices.patch
deleted file mode 100644
index a9ee560..0000000
--- a/package/boot/uboot-lantiq/patches/0016-sf-add-MTD-layer-driver-for-SPI-flash-devices.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From 7f6ded11965b09daf6da44d4fa98da17b9fba36c Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 19:41:26 +0100
-Subject: sf: add MTD layer driver for SPI flash devices
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/Makefile
-+++ b/drivers/mtd/spi/Makefile
-@@ -30,6 +30,7 @@ COBJS-$(CONFIG_SPL_SPI_LOAD) += spi_spl_
- endif
-
- COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
-+COBJS-$(CONFIG_SPI_FLASH_MTD) += spi_flash_mtd.o
- COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
- COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
- COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
---- a/drivers/mtd/spi/spi_flash_internal.h
-+++ b/drivers/mtd/spi/spi_flash_internal.h
-@@ -122,6 +122,9 @@ static inline int spi_flash_set_4byte_mo
- }
- #endif
-
-+/* SPI flash MTD adapter init */
-+int spi_flash_mtd_init(struct spi_flash *flash);
-+
- /* Manufacturer-specific probe functions */
- int spi_flash_probe_spansion(struct spi_flash *flash, u8 *idcode);
- int spi_flash_probe_atmel(struct spi_flash *flash, u8 *idcode);
---- /dev/null
-+++ b/drivers/mtd/spi/spi_flash_mtd.c
-@@ -0,0 +1,101 @@
-+/*
-+ * (C) Copyright 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
-+ *
-+ * MTD layer driver for SPI flash devices
-+ *
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ */
-+
-+#include <common.h>
-+#include <malloc.h>
-+#include <asm/errno.h>
-+#include <linux/mtd/mtd.h>
-+#include <spi_flash.h>
-+
-+static struct mtd_info sf_mtd_info;
-+static char sf_mtd_name[8];
-+
-+static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spi_flash *flash = mtd->priv;
-+ int err;
-+
-+ instr->state = MTD_ERASING;
-+
-+ err = spi_flash_erase(flash, instr->addr, instr->len);
-+ if (err) {
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-+ return -EIO;
-+ }
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int spi_flash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ struct spi_flash *flash = mtd->priv;
-+ int err;
-+
-+ err = spi_flash_read(flash, from, len, buf);
-+ if (!err)
-+ *retlen = len;
-+
-+ return err;
-+}
-+
-+static int spi_flash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
-+{
-+ struct spi_flash *flash = mtd->priv;
-+ int err;
-+
-+ err = spi_flash_write(flash, to, len, buf);
-+ if (!err)
-+ *retlen = len;
-+
-+ return err;
-+}
-+
-+static void spi_flash_mtd_sync(struct mtd_info *mtd)
-+{
-+}
-+
-+static int spi_flash_mtd_number(void)
-+{
-+#ifdef CONFIG_SYS_MAX_FLASH_BANKS
-+ return CONFIG_SYS_MAX_FLASH_BANKS;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+int spi_flash_mtd_init(struct spi_flash *flash)
-+{
-+ memset(&sf_mtd_info, 0, sizeof(sf_mtd_info));
-+ sprintf(sf_mtd_name, "nor%d", spi_flash_mtd_number());
-+
-+ sf_mtd_info.name = sf_mtd_name;
-+ sf_mtd_info.type = MTD_NORFLASH;
-+ sf_mtd_info.flags = MTD_CAP_NORFLASH;
-+ sf_mtd_info.writesize = 1;
-+
-+ sf_mtd_info.erase = spi_flash_mtd_erase;
-+ sf_mtd_info.read = spi_flash_mtd_read;
-+ sf_mtd_info.write = spi_flash_mtd_write;
-+ sf_mtd_info.sync = spi_flash_mtd_sync;
-+
-+ sf_mtd_info.size = flash->size;
-+ sf_mtd_info.priv = flash;
-+
-+ /* Only uniform flash devices for now */
-+ sf_mtd_info.numeraseregions = 0;
-+ sf_mtd_info.erasesize = flash->sector_size;
-+
-+ return add_mtd_device(&sf_mtd_info);
-+}
diff --git a/package/boot/uboot-lantiq/patches/0017-sf-add-init-function.patch b/package/boot/uboot-lantiq/patches/0017-sf-add-init-function.patch
deleted file mode 100644
index 2d29051..0000000
--- a/package/boot/uboot-lantiq/patches/0017-sf-add-init-function.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From aa9d5d64ca6441cb24e22dc3c1f707da62da2887 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 19:35:17 +0100
-Subject: sf: add init function
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/drivers/mtd/spi/spi_flash.c
-+++ b/drivers/mtd/spi/spi_flash.c
-@@ -482,3 +482,36 @@ void spi_flash_free(struct spi_flash *fl
- spi_flash_free_spl(flash);
- free(flash);
- }
-+
-+#ifdef CONFIG_SPI_FLASH_MTD
-+static int spi_flash_mtd_register(void)
-+{
-+ struct spi_flash *flash;
-+ int err;
-+
-+ flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
-+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
-+ if (!flash)
-+ return -1;
-+
-+ err = spi_flash_mtd_init(flash);
-+ if (err)
-+ spi_flash_free(flash);
-+
-+ return err;
-+}
-+#else
-+static int spi_flash_mtd_register(void)
-+{
-+ return 0;
-+}
-+#endif
-+
-+int spi_flash_init(void)
-+{
-+ int err;
-+
-+ err = spi_flash_mtd_register();
-+
-+ return err;
-+}
---- a/include/spi_flash.h
-+++ b/include/spi_flash.h
-@@ -51,6 +51,8 @@ struct spi_flash {
- #endif
- };
-
-+int spi_flash_init(void);
-+
- struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode);
- void spi_flash_free(struct spi_flash *flash);
diff --git a/package/boot/uboot-lantiq/patches/0029-tools-add-some-helper-tools-for-Lantiq-SoCs.patch b/package/boot/uboot-lantiq/patches/0017-tools-add-some-helper-tools-for-Lantiq-SoCs.patch
index 77d48d1..08347bb 100644
--- a/package/boot/uboot-lantiq/patches/0029-tools-add-some-helper-tools-for-Lantiq-SoCs.patch
+++ b/package/boot/uboot-lantiq/patches/0017-tools-add-some-helper-tools-for-Lantiq-SoCs.patch
@@ -1,11 +1,14 @@
-From 1b77d4249b5addbf3b0848db6992a445019a1865 Mon Sep 17 00:00:00 2001
+From 1da5479d59b39d7931a2b0efabdfa314f6788b6d Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
-Date: Wed, 29 Aug 2012 22:08:42 +0200
+Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: tools: add some helper tools for Lantiq SoCs
Signed-off-by: Luka Perkov Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/tools/gct.pl b/tools/gct.pl
+new file mode 100755
+index 0000000..33fa6f7
--- /dev/null
+++ b/tools/gct.pl
@@ -0,0 +1,155 @@
@@ -164,44 +167,150 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ $holder="";
+ }
+}
+diff --git a/tools/lantiq_bdi_conf.awk b/tools/lantiq_bdi_conf.awk
+new file mode 100755
+index 0000000..c732289
--- /dev/null
-+++ b/tools/lantiq_extract_openwrt_patches.sh
-@@ -0,0 +1,15 @@
-+#!/bin/bash
++++ b/tools/lantiq_bdi_conf.awk
+@@ -0,0 +1,116 @@
++#!/usr/bin/awk -f
++#
++# Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++# Copyright (C) 2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++#
++# Usage:
++# awk -f lantiq_bdi_conf.awk -v soc=ar9 board=<name> PATH_TO_BOARD/ddr_settings.h
++#
++# Additional information:
++# http://www.abatron.ch/fileadmin/user_upload/products/pdf/ManGDBR4K-3000.pdf
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++function print_header()
++{
++ print "; "
++ print "; Copyright (C) 2013 Luka Perkov <luka@openwrt.org> "
++ print "; Copyright (C) 2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> "
++ print "; "
++ print "; This file has been generated with lantiq_bdi_conf.awk script. "
++ print "; "
++ print "; SPDX-License-Identifier: GPL-2.0+ "
++ print "; "
++ print ""
++}
++
++function init_ar9_prologue()
++{
++ print "WM32 0xBF103010 0x80 ; CGU for CPU 333Mhz, DDR 167Mhz"
++ print "WM32 0xBF103014 0x01 ; CGU update"
++ print "WM32 0xBF800010 0x0 ; Clear error access log register"
++ print "WM32 0xBF800020 0x0 ; Clear error access log register"
++ print "WM32 0xBF800060 0xD ; Enable FPI, DDR and SRAM module in memory controller"
++ print "WM32 0xBF801030 0x0 ; Clear start bit of DDR memory controller"
++}
++
++function init_ar9_epilogue()
++{
++ print "WM32 0xBE105360 0x4001D7FF ; EBU setup"
++}
+
-+set -e
-+set -x
++function init_ddr1_epilogue()
++{
++ print "WM32 0xBF801030 0x100 ; Set start bit of DDR memory controller"
++}
++
++function ar9_target()
++{
++ print "CPUTYPE M34K"
++ print "ENDIAN BIG"
++ print "JTAGCLOCK 1"
++ print "BDIMODE AGENT ; [ LOADONLY, AGENT ]"
++ print "RESET JTAG ; [ NONE, JTAG, HARD ]"
++ print "POWERUP 100"
++ print "WAKEUP 100"
++ print "BREAKMODE HARD ; [ SOFT, HARD ]"
++ print "STEPMODE SWBP ; [ JTAG, HWBP, SWBP ]"
++ print "VECTOR CATCH"
++ print "SCANSUCC 1 5"
++}
++
++function flash_p2601hnfx()
++{
++ print "CHIPTYPE MIRRORX16"
++ print "CHIPSIZE 0x1000000"
++ print "BUSWIDTH 16"
++}
++
++BEGIN {
++ switch (soc) {
++ case "ar9":
++ reg_base = 0xbf801000
++ print_header()
++ print "[INIT]"
++ init_ar9_prologue()
++ break
++ default:
++ print "Invalid or no value for SoC specified!"
++ exit 1
++ }
++}
+
-+test $# -eq 1
++/^#define/ {
++ /* DC03 contains MC enable bit and must not be set here */
++ if (tolower($2) != "mc_dc03_value")
++ printf("WM32 0x%x %s\n", reg_base, tolower($3))
+
-+openwrt_root=$(readlink -f $1)
-+test -d $openwrt_root
++ reg_base += 0x10
++}
+
-+uboot_lantiq_dir=$openwrt_root/package/boot/uboot-lantiq/patches
-+test -d $uboot_lantiq_dir
++END {
++ switch (soc) {
++ case "ar9":
++ init_ddr1_epilogue()
++ init_ar9_epilogue()
++ print ""
++ print "[TARGET]"
++ ar9_target()
++ print ""
++ print "[HOST]"
++ print "PROMPT \"ar9> \""
++ print ""
++ break
++ default:
++ }
+
-+rm -vf $uboot_lantiq_dir/*
-+git format-patch -k -p --no-renames --text --full-index -o $uboot_lantiq_dir v2012.10..openwrt/v2013.01
++ switch (board) {
++ case "p2601hnfx":
++ print "[FLASH]"
++ flash_p2601hnfx()
++ print ""
++ break
++ default:
++ }
++}
+diff --git a/tools/lantiq_ram_extract_magic.awk b/tools/lantiq_ram_extract_magic.awk
+new file mode 100755
+index 0000000..64f1cbc
--- /dev/null
+++ b/tools/lantiq_ram_extract_magic.awk
-@@ -0,0 +1,70 @@
+@@ -0,0 +1,69 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
+#
-+# Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++# Usage:
++# mips-openwrt-linux-objdump -EB -b binary -m mips:isa32r2 -D YOUR_IMAGE_DUMP | awk -f lantiq_ram_extract_magic.awk
+#
-+# usage: mips-openwrt-linux-objdump -EB -b binary -m mips:isa32r2 -D YOUR_IMAGE_DUMP | awk -f lantiq_ram_extract_magic.awk
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+BEGIN {
+ print "/* "
-+ print " * This file is released under the terms of GPL v2 and any later version. "
-+ print " * See the file COPYING in the root directory of the source tree for details. "
++ print " * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org> "
+ print " * "
-+ print " * generated with lantiq_ram_extract_magic.awk "
++ print " * This file has been generated with lantiq_ram_extract_magic.awk script. "
+ print " * "
-+ print " * Copyright (C) 2011 Luka Perkov <luka@openwrt.org> "
++ print " * SPDX-License-Identifier: GPL-2.0+ "
+ print " */ "
+ print ""
+
@@ -255,35 +364,36 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ if ($4 == "t2,736(t1)")
+ right_section=0
+}
+diff --git a/tools/lantiq_ram_init_uart.awk b/tools/lantiq_ram_init_uart.awk
+new file mode 100755
+index 0000000..dc82645
--- /dev/null
+++ b/tools/lantiq_ram_init_uart.awk
-@@ -0,0 +1,101 @@
+@@ -0,0 +1,117 @@
+#!/usr/bin/awk -f
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
-+#
+# Copyright (C) 2011-2012 Luka Perkov <luka@openwrt.org>
+# Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#
-+# usage: awk -f lantiq_ram_init_uart.awk -v soc=<danube|ar9|vr9> PATH_TO_BOARD/ddr_settings.h
++# Usage:
++# awk -f lantiq_ram_init_uart.awk -v soc=<danube|ar9|vr9> PATH_TO_BOARD/ddr_settings.h
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+function print_header()
+{
+ print "; "
-+ print "; This file is released under the terms of GPL v2 and any later version. "
-+ print "; See the file COPYING in the root directory of the source tree for details. "
++ print "; Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org> "
++ print "; Copyright (C) 2012-2013 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> "
+ print "; "
-+ print "; generated with lantiq_ram_init_uart.awk "
-+ print "; "
-+ print "; Copyright (C) 2011-2012 Luka Perkov <luka@openwrt.org> "
-+ print "; Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> "
++ print "; This file has been generated with lantiq_ram_init_uart.awk script. "
+ print "; "
++ print "; SPDX-License-Identifier: GPL-2.0+ "
+ print ""
+}
+
-+function mc_ddr1_prologue()
++function mc_danube_prologue()
+{
+ /* Clear access error log registers */
+ print "0xbf800010", "0x0"
@@ -296,6 +406,19 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ print "0xbf801030", "0x0"
+}
+
++function mc_ar9_prologue()
++{
++ /* Clear access error log registers */
++ print "0xbf800010", "0x0"
++ print "0xbf800020", "0x0"
++
++ /* Enable FPI, DDR and SRAM module in memory controller */
++ print "0xbf800060", "0xD"
++
++ /* Clear start bit of DDR memory controller */
++ print "0xbf801030", "0x0"
++}
++
+function mc_ddr1_epilogue()
+{
+ /* Set start bit of DDR memory controller */
@@ -318,10 +441,14 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+BEGIN {
+ switch (soc) {
+ case "danube":
++ reg_base = 0xbf801000
++ print_header()
++ mc_danube_prologue()
++ break
+ case "ar9":
+ reg_base = 0xbf801000
+ print_header()
-+ mc_ddr1_prologue()
++ mc_ar9_prologue()
+ break
+ case "vr9":
+ reg_base = 0xbf401000
@@ -337,14 +464,15 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+}
+
+/^#define/ {
-+ printf("0x%x %s\n", reg_base, tolower($3))
-+ reg_base += 0x10
-+}
++ /* CCR07 contains MC enable bit and must not be set here */
++ if (tolower($2) == "mc_ccr07_value")
++ mc_ccr07_value = strtonum($3)
++ if (tolower($2) == "mc_dc03_value")
++ /* CCR07 contains MC enable bit and must not be set here */
++ else
++ printf("0x%x %s\n", reg_base, tolower($3))
+
-+/^#define(.*)MC_CCR07_VALUE/ {
-+ printf("0x%x %s\n", reg_base, tolower($3))
+ reg_base += 0x10
-+ mc_ccr07_value = strtonum($3)
+}
+
+END {
@@ -359,3 +487,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ default:
+ }
+}
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0018-MIPS-add-SPI-flash-init-hook.patch b/package/boot/uboot-lantiq/patches/0018-MIPS-add-SPI-flash-init-hook.patch
deleted file mode 100644
index 71f094b..0000000
--- a/package/boot/uboot-lantiq/patches/0018-MIPS-add-SPI-flash-init-hook.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 888b33e84082fe72d60d528c05c885c0c9d70bc4 Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Tue, 6 Nov 2012 21:19:43 +0100
-Subject: MIPS: add SPI flash init hook
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/arch/mips/lib/board.c
-+++ b/arch/mips/lib/board.c
-@@ -32,6 +32,7 @@
- #include <nand.h>
- #include <onenand_uboot.h>
- #include <spi.h>
-+#include <spi_flash.h>
-
- #ifdef CONFIG_BITBANGMII
- #include <miiphy.h>
-@@ -312,6 +313,16 @@ void board_init_r(gd_t *id, ulong dest_a
- onenand_init();
- #endif
-
-+#ifdef CONFIG_CMD_SPI
-+ puts("SPI: ");
-+ spi_init(); /* go init the SPI */
-+ puts("ready\n");
-+#endif
-+
-+#if defined(CONFIG_SPI_FLASH)
-+ spi_flash_init();
-+#endif
-+
- /* relocate environment function pointers etc. */
- env_relocate();
-
-@@ -335,12 +346,6 @@ void board_init_r(gd_t *id, ulong dest_a
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
--#ifdef CONFIG_CMD_SPI
-- puts("SPI: ");
-- spi_init(); /* go init the SPI */
-- puts("ready\n");
--#endif
--
- #if defined(CONFIG_MISC_INIT_R)
- /* miscellaneous platform dependent initialisations */
- misc_init_r();
diff --git a/package/boot/uboot-lantiq/patches/0018-tools-lantiq-add-NAND-SPL-support.patch b/package/boot/uboot-lantiq/patches/0018-tools-lantiq-add-NAND-SPL-support.patch
new file mode 100644
index 0000000..04c254f
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0018-tools-lantiq-add-NAND-SPL-support.patch
@@ -0,0 +1,228 @@
+From 43b9a7c9b903302c56d0a1d292a146dbf4de8e49 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 12 Aug 2013 01:17:08 +0200
+Subject: tools: lantiq: add NAND SPL support
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/tools/ltq-boot-image.c b/tools/ltq-boot-image.c
+index 75a188c..743fc6f 100644
+--- a/tools/ltq-boot-image.c
++++ b/tools/ltq-boot-image.c
+@@ -14,7 +14,8 @@
+
+ enum image_types {
+ IMAGE_NONE,
+- IMAGE_SFSPL
++ IMAGE_SFSPL,
++ IMAGE_NANDSPL
+ };
+
+ /* Lantiq non-volatile bootstrap command IDs */
+@@ -43,6 +44,8 @@ enum nvb_cmd_flags {
+ struct args {
+ enum image_types type;
+ __u32 entry_addr;
++ loff_t uboot_offset;
++ unsigned int page_size;
+ const char *uboot_bin;
+ const char *spl_bin;
+ const char *out_bin;
+@@ -50,10 +53,11 @@ struct args {
+
+ static void usage_msg(const char *name)
+ {
+- fprintf(stderr, "%s: [-h] -t type -e entry-addr -u uboot-bin [-s spl-bin] -o out-bin\n",
++ fprintf(stderr, "%s: [-h] -t type -e entry-addr [-x uboot-offset] [-p page-size] -u uboot-bin [-s spl-bin] -o out-bin\n",
+ name);
+ fprintf(stderr, " Image types:\n"
+- " sfspl - SPL + [compressed] U-Boot for SPI flash\n");
++ " sfspl - SPL + [compressed] U-Boot for SPI flash\n"
++ " nandspl - SPL + [compressed] U-Boot for NAND flash\n");
+ }
+
+ static enum image_types parse_image_type(const char *type)
+@@ -64,6 +68,9 @@ static enum image_types parse_image_type(const char *type)
+ if (!strncmp(type, "sfspl", 6))
+ return IMAGE_SFSPL;
+
++ if (!strncmp(type, "nandspl", 6))
++ return IMAGE_NANDSPL;
++
+ return IMAGE_NONE;
+ }
+
+@@ -73,7 +80,7 @@ static int parse_args(int argc, char *argv[], struct args *arg)
+
+ memset(arg, 0, sizeof(*arg));
+
+- while ((opt = getopt(argc, argv, "ht:e:u:s:o:")) != -1) {
++ while ((opt = getopt(argc, argv, "ht:e:x:p:u:s:o:")) != -1) {
+ switch (opt) {
+ case 'h':
+ usage_msg(argv[0]);
+@@ -84,6 +91,12 @@ static int parse_args(int argc, char *argv[], struct args *arg)
+ case 'e':
+ arg->entry_addr = strtoul(optarg, NULL, 16);
+ break;
++ case 'x':
++ arg->uboot_offset = strtoul(optarg, NULL, 16);
++ break;
++ case 'p':
++ arg->page_size = strtoul(optarg, NULL, 10);
++ break;
+ case 'u':
+ arg->uboot_bin = optarg;
+ break;
+@@ -114,11 +127,22 @@ static int parse_args(int argc, char *argv[], struct args *arg)
+ goto parse_error;
+ }
+
+- if (arg->type == IMAGE_SFSPL && !arg->spl_bin) {
++ if ((arg->type == IMAGE_SFSPL || arg->type == IMAGE_NANDSPL) &&
++ !arg->spl_bin) {
+ fprintf(stderr, "Missing SPL binary\n");
+ goto parse_error;
+ }
+
++ if (arg->type == IMAGE_NANDSPL && !arg->uboot_offset) {
++ fprintf(stderr, "Missing U-Boot offset\n");
++ goto parse_error;
++ }
++
++ if (arg->type == IMAGE_NANDSPL && !arg->page_size) {
++ fprintf(stderr, "Missing NAND page size\n");
++ goto parse_error;
++ }
++
+ return 0;
+
+ parse_error:
+@@ -174,6 +198,19 @@ static int write_nvb_start_header(int fd, __u32 addr)
+ return write_header(fd, hdr, sizeof(hdr));
+ }
+
++#if 0
++static int write_nvb_regcfg_header(int fd, __u32 addr)
++{
++ __u32 hdr[2];
++
++ hdr[0] = build_nvb_command(NVB_CMD_REGCFG, NVB_FLAG_SDBG |
++ NVB_FLAG_DBG);
++ hdr[1] = cpu_to_be32(addr);
++
++ return write_header(fd, hdr, sizeof(hdr));
++}
++#endif
++
+ static int open_input_bin(const char *name, void **ptr, size_t *size)
+ {
+ struct stat sbuf;
+@@ -238,9 +275,37 @@ static int open_output_bin(const char *name)
+ return fd;
+ }
+
+-static int create_sfspl(const struct args *arg)
++static int pad_to_offset(int fd, loff_t offset)
+ {
+- int out_fd, uboot_fd, spl_fd, ret;
++ loff_t pos;
++ size_t size;
++ ssize_t n;
++ __u8 *buf;
++
++ pos = lseek(fd, 0, SEEK_CUR);
++ size = offset - pos;
++
++ buf = malloc(size);
++ if (!buf) {
++ fprintf(stderr, "Failed to malloc buffer\n");
++ return -1;
++ }
++
++ memset(buf, 0xff, size);
++ n = write(fd, buf, size);
++ free(buf);
++
++ if (n != size) {
++ fprintf(stderr, "Failed to write pad bytes\n");
++ return -1;
++ }
++
++ return 0;
++}
++
++static int create_spl_image(const struct args *arg)
++{
++ int out_fd, uboot_fd, spl_fd, ret = 0;
+ void *uboot_ptr, *spl_ptr;
+ size_t uboot_size, spl_size;
+
+@@ -256,9 +321,22 @@ static int create_sfspl(const struct args *arg)
+ if (0 > uboot_fd)
+ goto err_uboot;
+
++#if 0
++ ret = write_nvb_regcfg_header(out_fd, 0);
++ if (ret)
++ goto err_write;
++#endif
++
+ ret = write_nvb_dwnld_header(out_fd, spl_size, arg->entry_addr);
+ if (ret)
+ goto err_write;
++#if 0
++ if (arg->page_size) {
++ ret = pad_to_offset(out_fd, arg->page_size);
++ if (ret)
++ goto err_write;
++ }
++#endif
+
+ ret = copy_bin(out_fd, spl_ptr, spl_size);
+ if (ret)
+@@ -268,16 +346,16 @@ static int create_sfspl(const struct args *arg)
+ if (ret)
+ goto err_write;
+
++ if (arg->uboot_offset) {
++ ret = pad_to_offset(out_fd, arg->uboot_offset);
++ if (ret)
++ goto err_write;
++ }
++
+ ret = copy_bin(out_fd, uboot_ptr, uboot_size);
+ if (ret)
+ goto err_write;
+
+- close_input_bin(uboot_fd, uboot_ptr, uboot_size);
+- close_input_bin(spl_fd, spl_ptr, spl_size);
+- close(out_fd);
+-
+- return 0;
+-
+ err_write:
+ close_input_bin(uboot_fd, uboot_ptr, uboot_size);
+ err_uboot:
+@@ -285,7 +363,7 @@ err_uboot:
+ err_spl:
+ close(out_fd);
+ err:
+- return -1;
++ return ret;
+ }
+
+ int main(int argc, char *argv[])
+@@ -299,7 +377,8 @@ int main(int argc, char *argv[])
+
+ switch (arg.type) {
+ case IMAGE_SFSPL:
+- ret = create_sfspl(&arg);
++ case IMAGE_NANDSPL:
++ ret = create_spl_image(&arg);
+ break;
+ default:
+ fprintf(stderr, "Image type not implemented\n");
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0019-Makefile-add-Lantiq-NAND-SPL-images.patch b/package/boot/uboot-lantiq/patches/0019-Makefile-add-Lantiq-NAND-SPL-images.patch
new file mode 100644
index 0000000..4ea965c
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0019-Makefile-add-Lantiq-NAND-SPL-images.patch
@@ -0,0 +1,53 @@
+From 2e01dc015bc8bb9ca45f369025c342ede990863e Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 12 Aug 2013 01:16:09 +0200
+Subject: Makefile: add Lantiq NAND SPL images
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/.gitignore b/.gitignore
+index 7abdc37..869b1b8 100644
+--- a/.gitignore
++++ b/.gitignore
+@@ -54,6 +54,9 @@
+ /u-boot.ltq.lzma.norspl
+ /u-boot.ltq.lzo.norspl
+ /u-boot.ltq.norspl
++/u-boot.ltq.lzma.nandspl
++/u-boot.ltq.lzo.nandspl
++/u-boot.ltq.nandspl
+ /u-boot.lzma.img
+ /u-boot.lzo.img
+
+diff --git a/Makefile b/Makefile
+index 73ec67d..0445035 100644
+--- a/Makefile
++++ b/Makefile
+@@ -599,6 +599,24 @@ $(obj)u-boot.ltq.lzma.sfspl: $(obj)u-boot.lzma.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/ltq-boot-image -t sfspl -e $(CONFIG_SPL_TEXT_BASE) \
+ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
+
++$(obj)u-boot.ltq.nandspl: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
++ $(obj)tools/ltq-boot-image -t nandspl -e $(CONFIG_SPL_TEXT_BASE) \
++ -x $(CONFIG_SYS_NAND_U_BOOT_OFFS) \
++ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
++ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
++
++$(obj)u-boot.ltq.lzo.nandspl: $(obj)u-boot.lzo.img $(obj)spl/u-boot-spl.bin
++ $(obj)tools/ltq-boot-image -t nandspl -e $(CONFIG_SPL_TEXT_BASE) \
++ -x $(CONFIG_SYS_NAND_U_BOOT_OFFS) \
++ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
++ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
++
++$(obj)u-boot.ltq.lzma.nandspl: $(obj)u-boot.lzma.img $(obj)spl/u-boot-spl.bin
++ $(obj)tools/ltq-boot-image -t nandspl -e $(CONFIG_SPL_TEXT_BASE) \
++ -x $(CONFIG_SYS_NAND_U_BOOT_OFFS) \
++ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
++ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
++
+ $(obj)u-boot.ltq.norspl: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+ cat $(obj)spl/u-boot-spl.bin $< > $@
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0020-MIPS-lantiq-add-NAND-SPL-support.patch b/package/boot/uboot-lantiq/patches/0020-MIPS-lantiq-add-NAND-SPL-support.patch
new file mode 100644
index 0000000..a5ea68f
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0020-MIPS-lantiq-add-NAND-SPL-support.patch
@@ -0,0 +1,172 @@
+From e17398316e82d8b28217232b4fd6030c65138e74 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 12 Aug 2013 01:18:00 +0200
+Subject: MIPS: lantiq: add NAND SPL support
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/arch/mips/cpu/mips32/lantiq-common/spl.c b/arch/mips/cpu/mips32/lantiq-common/spl.c
+index 489a82b..3d9d4d4 100644
+--- a/arch/mips/cpu/mips32/lantiq-common/spl.c
++++ b/arch/mips/cpu/mips32/lantiq-common/spl.c
+@@ -8,6 +8,7 @@
+ #include <image.h>
+ #include <version.h>
+ #include <spi_flash.h>
++#include <nand.h>
+ #include <linux/compiler.h>
+ #include <lzma/LzmaDec.h>
+ #include <linux/lzo.h>
+@@ -63,6 +64,18 @@
+ #define spl_boot_nor_flash 0
+ #endif
+
++#if defined(CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH) && defined(CONFIG_SYS_BOOT_NANDSPL)
++#define spl_boot_nand_flash 1
++#else
++#define spl_boot_nand_flash 0
++#ifndef CONFIG_SYS_NAND_U_BOOT_OFFS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
++#endif
++#ifndef CONFIG_SYS_NAND_PAGE_SIZE
++#define CONFIG_SYS_NAND_PAGE_SIZE 0
++#endif
++#endif
++
+ #define spl_sync() __asm__ __volatile__("sync");
+
+ struct spl_image {
+@@ -337,6 +350,58 @@ static int spl_load_nor_flash(struct spl_image *spl)
+ return ret;
+ }
+
++static int spl_load_nand_flash(struct spl_image *spl)
++{
++ image_header_t *hdr;
++ int ret;
++ unsigned long loadaddr;
++
++ /*
++ * Image format:
++ *
++ * - 12 byte non-volatile bootstrap header
++ * - SPL binary
++ * - 12 byte non-volatile bootstrap header
++ * - padding bytes up to CONFIG_SYS_NAND_U_BOOT_OFFS
++ * - 64 byte U-Boot mkimage header
++ * - U-Boot binary
++ */
++ spl->data_addr = CONFIG_SYS_NAND_U_BOOT_OFFS;
++
++ spl_puts("SPL: initializing NAND flash\n");
++ nand_init();
++
++ spl_debug("SPL: reading image header at page offset %lx\n",
++ spl->data_addr);
++
++ hdr = (image_header_t *) CONFIG_LOADADDR;
++ ret = nand_spl_load_image(spl->data_addr,
++ CONFIG_SYS_NAND_PAGE_SIZE, hdr);
++ if (ret)
++ return ret;
++
++ spl_debug("SPL: checking image header at address %p\n", hdr);
++
++ ret = spl_parse_image(hdr, spl);
++ if (ret)
++ return ret;
++
++ if (spl_is_compressed(spl))
++ loadaddr = CONFIG_LOADADDR;
++ else
++ loadaddr = spl->entry_addr;
++
++ spl_puts("SPL: loading U-Boot to RAM\n");
++
++ ret = nand_spl_load_image(spl->data_addr, spl->data_size,
++ (void *) loadaddr);
++
++ if (spl_is_compressed(spl))
++ ret = spl_uncompress(spl, loadaddr);
++
++ return ret;
++}
++
+ static int spl_load(struct spl_image *spl)
+ {
+ int ret;
+@@ -345,6 +410,8 @@ static int spl_load(struct spl_image *spl)
+ ret = spl_load_spi_flash(spl);
+ else if (spl_boot_nor_flash)
+ ret = spl_load_nor_flash(spl);
++ else if (spl_boot_nand_flash)
++ ret = spl_load_nand_flash(spl);
+ else
+ ret = 1;
+
+diff --git a/arch/mips/include/asm/lantiq/config.h b/arch/mips/include/asm/lantiq/config.h
+index feac30d..483cc94 100644
+--- a/arch/mips/include/asm/lantiq/config.h
++++ b/arch/mips/include/asm/lantiq/config.h
+@@ -40,6 +40,26 @@
+ #define CONFIG_SPI_SPL_SIMPLE
+ #endif
+
++/*
++ * NAND flash SPL
++ * BOOT CFG 06 only (address cycle based probing, 2KB or 512B page size)
++ */
++#if defined(CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH) && defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_SPL
++#define CONFIG_SPL_NAND_SUPPORT
++#define CONFIG_SPL_NAND_DRIVERS
++#define CONFIG_SPL_NAND_SIMPLE
++#define CONFIG_SPL_NAND_ECC
++
++/* use software ECC until driver supports HW ECC */
++#define CONFIG_SPL_NAND_SOFTECC
++#define CONFIG_SYS_NAND_ECCSIZE 256
++#define CONFIG_SYS_NAND_ECCBYTES 3
++#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
++ 48, 49, 50, 51, 52, 53, 54, 55, \
++ 56, 57, 58, 59, 60, 61, 62, 63}
++#endif
++
+ #if defined(CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH) && defined(CONFIG_SYS_BOOT_NORSPL)
+ #define CONFIG_SPL
+ #endif
+@@ -148,6 +168,21 @@
+ #define CONFIG_ENV_LOAD_UBOOT_SF
+ #endif
+
++#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
++#define CONFIG_ENV_WRITE_UBOOT_NAND \
++ "write-uboot-nand=" \
++ "nand erase 0 $filesize && " \
++ "nand write $fileaddr 0 $filesize\0"
++
++#define CONFIG_ENV_LOAD_UBOOT_NAND \
++ "load-uboot-nandspl=tftpboot u-boot.ltq.nandspl\0" \
++ "load-uboot-nandspl-lzo=tftpboot u-boot.ltq.lzo.nandspl\0" \
++ "load-uboot-nandspl-lzma=tftpboot u-boot.ltq.lzma.nandspl\0"
++#else
++#define CONFIG_ENV_WRITE_UBOOT_NAND
++#define CONFIG_ENV_LOAD_UBOOT_NAND
++#endif
++
+ #define CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_CONSOLEDEV \
+ CONFIG_ENV_ADDCONSOLE \
+@@ -159,6 +194,8 @@
+ CONFIG_ENV_LOAD_UBOOT_NOR \
+ CONFIG_ENV_SF_PROBE \
+ CONFIG_ENV_WRITE_UBOOT_SF \
+- CONFIG_ENV_LOAD_UBOOT_SF
++ CONFIG_ENV_LOAD_UBOOT_SF \
++ CONFIG_ENV_WRITE_UBOOT_NAND \
++ CONFIG_ENV_LOAD_UBOOT_NAND
+
+ #endif /* __LANTIQ_CONFIG_H__ */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0021-MIPS-vrx200-add-NAND-SPL-support.patch b/package/boot/uboot-lantiq/patches/0021-MIPS-vrx200-add-NAND-SPL-support.patch
new file mode 100644
index 0000000..160ede9
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0021-MIPS-vrx200-add-NAND-SPL-support.patch
@@ -0,0 +1,37 @@
+From 7361581a1baaec43058f5b9350c32c7ac4e58064 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 12 Aug 2013 00:11:16 +0200
+Subject: MIPS: vrx200: add NAND SPL support
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/arch/mips/cpu/mips32/vrx200/config.mk b/arch/mips/cpu/mips32/vrx200/config.mk
+index 442156a..b0fc882 100644
+--- a/arch/mips/cpu/mips32/vrx200/config.mk
++++ b/arch/mips/cpu/mips32/vrx200/config.mk
+@@ -27,4 +27,9 @@ ALL-y += $(obj)u-boot.ltq.norspl
+ ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.norspl
+ ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
+ endif
++ifdef CONFIG_SYS_BOOT_NANDSPL
++ALL-y += $(obj)u-boot.ltq.nandspl
++ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.nandspl
++ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.nandspl
++endif
+ endif
+diff --git a/arch/mips/include/asm/arch-vrx200/config.h b/arch/mips/include/asm/arch-vrx200/config.h
+index 88ef256..4ec6092 100644
+--- a/arch/mips/include/asm/arch-vrx200/config.h
++++ b/arch/mips/include/asm/arch-vrx200/config.h
+@@ -164,7 +164,7 @@
+ #define CONFIG_SYS_TEXT_BASE 0xB0000000
+ #endif
+
+-#if defined(CONFIG_SYS_BOOT_SFSPL)
++#if defined(CONFIG_SYS_BOOT_SFSPL) || defined(CONFIG_SYS_BOOT_NANDSPL)
+ #define CONFIG_SYS_TEXT_BASE 0x80100000
+ #define CONFIG_SPL_TEXT_BASE 0xBE220000
+ #endif
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch b/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch
new file mode 100644
index 0000000..478193e
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0022-MIPS-lantiq-easy80920-add-support-for-NAND-SPL.patch
@@ -0,0 +1,68 @@
+From 6fa1c350fa19a054371eccef84e4885cfdd6a2d7 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 19 Aug 2013 18:11:31 +0200
+Subject: MIPS: lantiq: easy80920: add support for NAND SPL
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/boards.cfg b/boards.cfg
+index f090726..394ede7 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -509,6 +509,7 @@ Active mips mips32 incaip - incaip
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
++Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/easy80920.h b/include/configs/easy80920.h
+index ad69bc2..56ceedb 100644
+--- a/include/configs/easy80920.h
++++ b/include/configs/easy80920.h
+@@ -31,6 +31,14 @@
+
+ #define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_SYS_NAND_PAGE_COUNT 128
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
++
+ #define CONFIG_LTQ_SPL_COMP_LZO
+ #define CONFIG_LTQ_SPL_CONSOLE
+
+@@ -57,6 +65,11 @@
+ #define CONFIG_ENV_OVERWRITE
+ #define CONFIG_ENV_OFFSET (192 * 1024)
+ #define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (256 * 1024)
+ #else
+ #define CONFIG_ENV_IS_NOWHERE
+ #endif
+@@ -84,9 +97,13 @@
+ #define CONFIG_ENV_UPDATE_UBOOT_SF \
+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
+
++#define CONFIG_ENV_UPDATE_UBOOT_NAND \
++ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
++
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_UPDATE_UBOOT_NOR \
+- CONFIG_ENV_UPDATE_UBOOT_SF
++ CONFIG_ENV_UPDATE_UBOOT_SF \
++ CONFIG_ENV_UPDATE_UBOOT_NAND
+
+ #endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch b/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch
new file mode 100644
index 0000000..172729c
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0023-MIPS-lantiq-add-default-openwrt-config.patch
@@ -0,0 +1,56 @@
+From 8f584936adad0fca8beece5f55eadcdcd02fad0a Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sat, 17 Aug 2013 03:44:46 +0200
+Subject: MIPS: lantiq: add default openwrt config
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/include/configs/openwrt-lantiq-common.h b/include/configs/openwrt-lantiq-common.h
+new file mode 100644
+index 0000000..d119bef
+--- /dev/null
++++ b/include/configs/openwrt-lantiq-common.h
+@@ -0,0 +1,39 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __OPENWRT_LANTIQ_COMMON_H
++#define __OPENWRT_LANTIQ_COMMON_H
++
++/* Commands */
++#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
++#define CONFIG_CMD_PING
++#endif
++
++/* Compression */
++#define CONFIG_LZMA
++
++/* Auto boot */
++#define CONFIG_BOOTDELAY 2
++
++/* Environment */
++#if !defined(CONFIG_SYS_BOOT_RAM)
++#define CONFIG_BOOTCOMMAND \
++ "bootm ${kernel_addr}"
++#endif
++
++/* Ethernet */
++#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
++#define CONFIG_ETHADDR 00:01:02:03:04:05
++#define CONFIG_SERVERIP 192.168.1.2
++#define CONFIG_IPADDR 192.168.1.1
++#endif
++
++/* Unnecessary */
++#undef CONFIG_BOOTM_NETBSD
++#undef CONFIG_BOOTM_PLAN9
++#undef CONFIG_BOOTM_RTEMS
++
++#endif /* __OPENWRT_LANTIQ_COMMON_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0024-MIPS-VRX200-add-option-to-boot-from-AVM-EVA-loader.patch b/package/boot/uboot-lantiq/patches/0024-MIPS-VRX200-add-option-to-boot-from-AVM-EVA-loader.patch
deleted file mode 100644
index ba24bae..0000000
--- a/package/boot/uboot-lantiq/patches/0024-MIPS-VRX200-add-option-to-boot-from-AVM-EVA-loader.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 2c6115188c7353a601835885a6c544240cfc479e Mon Sep 17 00:00:00 2001
-From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Fri, 30 Nov 2012 18:09:25 +0100
-Subject: MIPS: VRX200: add option to boot from AVM EVA loader
-
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
---- a/arch/mips/cpu/mips32/vrx200/config.mk
-+++ b/arch/mips/cpu/mips32/vrx200/config.mk
-@@ -17,6 +17,9 @@ endif
- LIBS-y += $(CPUDIR)/lantiq-common/liblantiq-common.o
-
- ifndef CONFIG_SPL_BUILD
-+ifdef CONFIG_SYS_BOOT_EVA
-+ALL-y += $(obj)u-boot.bin.lzma
-+endif
- ifdef CONFIG_SYS_BOOT_SFSPL
- ALL-y += $(obj)u-boot.ltq.sfspl
- ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.sfspl
---- a/arch/mips/include/asm/arch-vrx200/config.h
-+++ b/arch/mips/include/asm/arch-vrx200/config.h
-@@ -161,6 +161,11 @@
- #define CONFIG_SYS_DISABLE_CACHE
- #endif
-
-+#if defined(CONFIG_SYS_BOOT_EVA)
-+#define CONFIG_SYS_TEXT_BASE 0x80100000
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#endif
-+
- #if defined(CONFIG_SYS_BOOT_NOR)
- #define CONFIG_SYS_TEXT_BASE 0xB0000000
- #endif
diff --git a/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch b/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch
new file mode 100644
index 0000000..8c9edb9
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0024-MIPS-lantiq-easy50712-add-openwrt-lantiq-common.h.patch
@@ -0,0 +1,31 @@
+From ac6896098d9dd62a248340e6a090574399e1fd87 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 19 Aug 2013 18:46:47 +0200
+Subject: MIPS: lantiq: easy50712: add openwrt-lantiq-common.h
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/include/configs/easy50712.h b/include/configs/easy50712.h
+index 6d7988c..bc8820a 100644
+--- a/include/configs/easy50712.h
++++ b/include/configs/easy50712.h
+@@ -62,13 +62,13 @@
+ #define CONFIG_CONSOLE_ASC 1
+ #define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+-/* Commands */
+-#define CONFIG_CMD_PING
+-
+ /* Pull in default board configs for Lantiq XWAY Danube */
+ #include <asm/lantiq/config.h>
+ #include <asm/arch/config.h>
+
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
+ #define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch b/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch
new file mode 100644
index 0000000..15fc4c5
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0025-MIPS-lantiq-easy80920-add-openwrt-lantiq-common.h.patch
@@ -0,0 +1,31 @@
+From 7afbe4633773905ef94a8404510fb5a459926000 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Mon, 19 Aug 2013 18:11:57 +0200
+Subject: MIPS: lantiq: easy80920: add openwrt-lantiq-common.h
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/include/configs/easy80920.h b/include/configs/easy80920.h
+index 56ceedb..6f5ac03 100644
+--- a/include/configs/easy80920.h
++++ b/include/configs/easy80920.h
+@@ -84,13 +84,13 @@
+ #define CONFIG_CONSOLE_ASC 1
+ #define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+-/* Commands */
+-#define CONFIG_CMD_PING
+-
+ /* Pull in default board configs for Lantiq XWAY VRX200 */
+ #include <asm/lantiq/config.h>
+ #include <asm/arch/config.h>
+
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
+ #define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-Arcadyan-ARV4519.patch b/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
index 4698e67..aa1543b 100644
--- a/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
+++ b/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Arcadyan-ARV4519.patch
@@ -1,20 +1,21 @@
-From 4a738c02a7190756e01ba58c93c4b07bc6d6c2aa Mon Sep 17 00:00:00 2001
+From 9f915cf9550a6234adecaf3031c2b279835e14af Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
-Date: Wed, 29 Aug 2012 22:08:42 +0200
+Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: MIPS: add board support for Arcadyan ARV4519
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/board/arcadyan/arv4519pw/Makefile b/board/arcadyan/arv4519pw/Makefile
+new file mode 100644
+index 0000000..3a547c2
--- /dev/null
+++ b/board/arcadyan/arv4519pw/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -38,14 +39,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/arcadyan/arv4519pw/arv4519pw.c b/board/arcadyan/arv4519pw/arv4519pw.c
+new file mode 100644
+index 0000000..a9dfd03
--- /dev/null
+++ b/board/arcadyan/arv4519pw/arv4519pw.c
-@@ -0,0 +1,52 @@
+@@ -0,0 +1,51 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -93,27 +96,31 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ return switch_device_register(&ar8216_dev);
+}
+diff --git a/board/arcadyan/arv4519pw/config.mk b/board/arcadyan/arv4519pw/config.mk
+new file mode 100644
+index 0000000..9d8953b
--- /dev/null
+++ b/board/arcadyan/arv4519pw/config.mk
-@@ -0,0 +1,8 @@
+@@ -0,0 +1,7 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/arv4519pw/ddr_settings.h b/board/arcadyan/arv4519pw/ddr_settings.h
+new file mode 100644
+index 0000000..c5e88b3
--- /dev/null
+++ b/board/arcadyan/arv4519pw/ddr_settings.h
-@@ -0,0 +1,56 @@
+@@ -0,0 +1,55 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * generated with lantiq_ram_extract_magic.awk
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
+ *
-+ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
@@ -163,25 +170,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index 394ede7..f300d5a 100644
--- a/boards.cfg
+++ b/boards.cfg
-@@ -438,6 +438,8 @@ vct_premium mips
- vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND
- vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE
- vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE
-+arv4519pw_ram mips mips32 arv4519pw arcadyan danube arv4519pw:SYS_BOOT_RAM
-+arv4519pw_nor mips mips32 arv4519pw arcadyan danube arv4519pw:SYS_BOOT_NOR
- arv7518pw_ram mips mips32 arv7518pw arcadyan danube arv7518pw:SYS_BOOT_RAM
- arv7518pw_nor mips mips32 arv7518pw arcadyan danube arv7518pw:SYS_BOOT_NOR
- dbau1000 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1000
+@@ -502,6 +502,9 @@ Active mips mips32 au1x00 - dbau1x00
+ Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/arv4519pw.h b/include/configs/arv4519pw.h
+new file mode 100644
+index 0000000..6907108
--- /dev/null
+++ b/include/configs/arv4519pw.h
-@@ -0,0 +1,69 @@
+@@ -0,0 +1,67 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
@@ -193,7 +205,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+/* Switch devices */
@@ -205,44 +219,44 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SIZE (64 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
-+#define CONFIG_ENV_SIZE (2 * 1024)
+#endif
+
++#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
-+/* Compression */
-+#define CONFIG_LZMA
-+
-+/* Auto boot */
-+#define CONFIG_BOOTDELAY 2
-+
-+/* Environment configuration */
-+#define CONFIG_BOOTCOMMAND \
-+ "run addeth; bootm ${kernel_addr}"
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "kernel_addr=0xB0040000\0"
+
+#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch b/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
index 4156089..2e9b855 100644
--- a/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
+++ b/package/boot/uboot-lantiq/patches/0027-MIPS-add-board-support-for-Arcadyan-ARV7518.patch
@@ -1,20 +1,21 @@
-From 289f7ed5d725067b4eb4b1a105bb63d55bf20392 Mon Sep 17 00:00:00 2001
+From 54a31b334162e8dc2ea891057ddeab42978db8b3 Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
-Date: Wed, 29 Aug 2012 22:08:41 +0200
+Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: MIPS: add board support for Arcadyan ARV7518
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/board/arcadyan/arv7518pw/Makefile b/board/arcadyan/arv7518pw/Makefile
+new file mode 100644
+index 0000000..3a547c2
--- /dev/null
+++ b/board/arcadyan/arv7518pw/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -38,14 +39,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/arcadyan/arv7518pw/arv7518pw.c b/board/arcadyan/arv7518pw/arv7518pw.c
+new file mode 100644
+index 0000000..a9dfd03
--- /dev/null
+++ b/board/arcadyan/arv7518pw/arv7518pw.c
-@@ -0,0 +1,52 @@
+@@ -0,0 +1,51 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -93,27 +96,31 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+{
+ return switch_device_register(&ar8216_dev);
+}
+diff --git a/board/arcadyan/arv7518pw/config.mk b/board/arcadyan/arv7518pw/config.mk
+new file mode 100644
+index 0000000..9d8953b
--- /dev/null
+++ b/board/arcadyan/arv7518pw/config.mk
-@@ -0,0 +1,8 @@
+@@ -0,0 +1,7 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/arv7518pw/ddr_settings.h b/board/arcadyan/arv7518pw/ddr_settings.h
+new file mode 100644
+index 0000000..8b5e9c5
--- /dev/null
+++ b/board/arcadyan/arv7518pw/ddr_settings.h
-@@ -0,0 +1,56 @@
+@@ -0,0 +1,55 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * generated with lantiq_ram_extract_magic.awk
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
+ *
-+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
@@ -163,25 +170,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index f300d5a..e832423 100644
--- a/boards.cfg
+++ b/boards.cfg
-@@ -438,6 +438,8 @@ vct_premium mips
- vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND
- vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE
- vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE
-+arv7518pw_ram mips mips32 arv7518pw arcadyan danube arv7518pw:SYS_BOOT_RAM
-+arv7518pw_nor mips mips32 arv7518pw arcadyan danube arv7518pw:SYS_BOOT_NOR
- dbau1000 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1000
- dbau1100 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1100
- dbau1500 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1500
+@@ -505,6 +505,9 @@ Active mips mips32 au1x00 - pb1x00
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/arv7518pw.h b/include/configs/arv7518pw.h
+new file mode 100644
+index 0000000..8cf1708
--- /dev/null
+++ b/include/configs/arv7518pw.h
-@@ -0,0 +1,69 @@
+@@ -0,0 +1,67 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
@@ -193,7 +205,9 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+/* Switch devices */
@@ -205,44 +219,44 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (192 * 1024)
-+#define CONFIG_ENV_SIZE (64 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
-+#define CONFIG_ENV_SIZE (2 * 1024)
+#endif
+
++#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
-+/* Compression */
-+#define CONFIG_LZMA
-+
-+/* Auto boot */
-+#define CONFIG_BOOTDELAY 2
-+
-+/* Environment configuration */
-+#define CONFIG_BOOTCOMMAND \
-+ "run addeth; bootm ${kernel_addr}"
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ CONFIG_ENV_LANTIQ_DEFAULTS \
-+ CONFIG_ENV_UPDATE_UBOOT_NOR \
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "kernel_addr=0xB0040000\0"
+
+#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch b/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch
new file mode 100644
index 0000000..c56365b
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0028-MIPS-add-board-support-for-AudioCodes-MP-252.patch
@@ -0,0 +1,268 @@
+From 4bacfc80eae768be45f9ddf7588ec55281354648 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel.golle@gmail.com>
+Date: Fri, 8 Mar 2013 13:29:04 +0200
+Subject: MIPS: add board support for AudioCodes MP-252
+
+Signed-off-by: Daniel Golle <dgolle@allnet.de>
+
+diff --git a/board/audiocodes/acmp252/Makefile b/board/audiocodes/acmp252/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/audiocodes/acmp252/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/audiocodes/acmp252/acmp252.c b/board/audiocodes/acmp252/acmp252.c
+new file mode 100644
+index 0000000..3368506
+--- /dev/null
++++ b/board/audiocodes/acmp252/acmp252.c
+@@ -0,0 +1,66 @@
++/*
++ * Copyright (C) 2013 Daniel Golle <daniel.golle@gmail.com>
++ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++static void gpio_init(void)
++{
++ /* Activate reset line of ADM6996I switch */
++ gpio_direction_output(19, 0);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Lantiq ADM6996I switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate reset line of ADM6996I switch */
++ gpio_set_value(19, 1);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
+diff --git a/board/audiocodes/acmp252/config.mk b/board/audiocodes/acmp252/config.mk
+new file mode 100644
+index 0000000..9d8953b
+--- /dev/null
++++ b/board/audiocodes/acmp252/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/audiocodes/acmp252/ddr_settings.h b/board/audiocodes/acmp252/ddr_settings.h
+new file mode 100644
+index 0000000..d0b4f20
+--- /dev/null
++++ b/board/audiocodes/acmp252/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x403
++#define MC_DC08_VALUE 0x103
++#define MC_DC09_VALUE 0x80B
++#define MC_DC10_VALUE 0x304
++#define MC_DC11_VALUE 0xD03
++#define MC_DC12_VALUE 0x2C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x13C
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x402
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1700
++#define MC_DC22_VALUE 0x1717
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5C
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x2D93
++#define MC_DC30_VALUE 0x8300
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index e832423..9f407b8 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -508,6 +508,8 @@ Active mips mips32 danube arcadyan arv4519pw
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle@gmail.com>
++Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/acmp252.h b/include/configs/acmp252.h
+new file mode 100644
+index 0000000..2c9ab19
+--- /dev/null
++++ b/include/configs/acmp252.h
+@@ -0,0 +1,60 @@
++/*
++ * Copyright (C) 2013 Daniel Golle <daniel.golle@gmail.com>
++ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ACMP252"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "AudioCodes MP-252"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0025-MIPS-add-board-support-for-AVM-FritzBox-3370.patch b/package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
index b680a97..3d13f5c 100644
--- a/package/boot/uboot-lantiq/patches/0025-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
+++ b/package/boot/uboot-lantiq/patches/0029-MIPS-add-board-support-for-AVM-FritzBox-3370.patch
@@ -1,20 +1,22 @@
-From 51f04c00e831b49587f9f766ff1af67d2122feb2 Mon Sep 17 00:00:00 2001
+From 37a95ae4ba75407a26862ece6f48fa68aa6c5c78 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Date: Fri, 30 Nov 2012 18:09:47 +0100
+Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: MIPS: add board support for AVM FritzBox 3370
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/board/avm/fb3370/Makefile b/board/avm/fb3370/Makefile
+new file mode 100644
+index 0000000..e3d621e
--- /dev/null
+++ b/board/avm/fb3370/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
+#
++# SPDX-License-Identifier: GPL-2.0+
++#
+
+include $(TOPDIR)/config.mk
+
@@ -37,26 +39,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/avm/fb3370/config.mk b/board/avm/fb3370/config.mk
+new file mode 100644
+index 0000000..4dcfd05
--- /dev/null
+++ b/board/avm/fb3370/config.mk
-@@ -0,0 +1,8 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
+#
++# SPDX-License-Identifier: GPL-2.0+
++#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/avm/fb3370/ddr_settings.h b/board/avm/fb3370/ddr_settings.h
+new file mode 100644
+index 0000000..307c084
--- /dev/null
+++ b/board/avm/fb3370/ddr_settings.h
-@@ -0,0 +1,70 @@
+@@ -0,0 +1,69 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_CCR00_VALUE 0x101
@@ -100,8 +106,8 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_CCR38_VALUE 0x0
+#define MC_CCR39_VALUE 0x141F04
+#define MC_CCR40_VALUE 0x142704
-+#define MC_CCR41_VALUE 0x141b42
-+#define MC_CCR42_VALUE 0x141b42
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
+#define MC_CCR43_VALUE 0x566504
+#define MC_CCR44_VALUE 0x566504
+#define MC_CCR45_VALUE 0x565F17
@@ -121,14 +127,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_CCR59_VALUE 0x7800301
+#define MC_CCR60_VALUE 0x7800301
+#define MC_CCR61_VALUE 0x4
+diff --git a/board/avm/fb3370/fb3370.c b/board/avm/fb3370/fb3370.c
+new file mode 100644
+index 0000000..ff44c68
--- /dev/null
+++ b/board/avm/fb3370/fb3370.c
-@@ -0,0 +1,139 @@
+@@ -0,0 +1,138 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -263,26 +271,30 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ break;
+ }
+}
+diff --git a/boards.cfg b/boards.cfg
+index 9f407b8..ea5c4f9 100644
--- a/boards.cfg
+++ b/boards.cfg
-@@ -451,6 +451,9 @@ incaip mips
- incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000
- incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000
- incaip_150MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=150000000
-+fb3370_ram mips mips32 fb3370 avm vrx200 fb3370:SYS_BOOT_RAM
-+fb3370_eva mips mips32 fb3370 avm vrx200 fb3370:SYS_BOOT_EVA
-+fb3370_sfspl mips mips32 fb3370 avm vrx200 fb3370:SYS_BOOT_SFSPL
- easy80920_nor mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_NOR
- easy80920_norspl mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_NORSPL
- easy80920_ram mips mips32 easy80920 lantiq vrx200 easy80920:SYS_BOOT_RAM
+@@ -517,6 +517,9 @@ Active mips mips32 incaip - incaip
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
++Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nandspl easy80920:SYS_BOOT_NANDSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/fb3370.h b/include/configs/fb3370.h
+new file mode 100644
+index 0000000..8ae1373
--- /dev/null
+++ b/include/configs/fb3370.h
-@@ -0,0 +1,75 @@
+@@ -0,0 +1,78 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
@@ -293,24 +305,24 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_BOARD_NAME "AVM FritzBox 3370"
+
+/* Configure SoC */
-+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
+
-+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
-+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
++#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
+
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
+
+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 4
+#define CONFIG_SPL_SPI_MAX_HZ 25000000
+#define CONFIG_SPL_SPI_MODE 0
+
-+#define CONFIG_LTQ_SPL_COMP_LZO
-+#define CONFIG_LTQ_SPL_CONSOLE
-+
+#define CONFIG_SYS_DRAM_PROBE
+
+/* Environment */
@@ -329,22 +341,26 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#endif
+
+#define CONFIG_ENV_SIZE (8 * 1024)
-+
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
++#if defined(CONFIG_SYS_BOOT_EVA)
++#define CONFIG_SYS_TEXT_BASE 0x80100000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
+/* Pull in default board configs for Lantiq XWAY VRX200 */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
+#define CONFIG_ENV_UPDATE_UBOOT_SF \
+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
+
@@ -353,3 +369,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ CONFIG_ENV_UPDATE_UBOOT_SF
+
+#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Gigaset-SX76X.patch b/package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch
index 810770a..91c6263 100644
--- a/package/boot/uboot-lantiq/patches/0026-MIPS-add-board-support-for-Gigaset-SX76X.patch
+++ b/package/boot/uboot-lantiq/patches/0030-MIPS-add-board-support-for-Gigaset-SX76X.patch
@@ -1,20 +1,21 @@
-From 66b56aa3a4810f10e0b0c77bb87279a8d64b566b Mon Sep 17 00:00:00 2001
+From 9e9dec563e4d061e7b34d2d59a89eb05c60f43a7 Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
-Date: Fri, 16 Dec 2011 11:55:45 +0100
+Date: Sat, 2 Mar 2013 23:34:00 +0100
Subject: MIPS: add board support for Gigaset SX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/board/gigaset/sx76x/Makefile b/board/gigaset/sx76x/Makefile
+new file mode 100644
+index 0000000..3a547c2
--- /dev/null
+++ b/board/gigaset/sx76x/Makefile
-@@ -0,0 +1,29 @@
-+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
+@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
@@ -38,27 +39,31 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+sinclude $(obj).depend
+
+#########################################################################
+diff --git a/board/gigaset/sx76x/config.mk b/board/gigaset/sx76x/config.mk
+new file mode 100644
+index 0000000..9d8953b
--- /dev/null
+++ b/board/gigaset/sx76x/config.mk
-@@ -0,0 +1,8 @@
+@@ -0,0 +1,7 @@
+#
-+# This file is released under the terms of GPL v2 and any later version.
-+# See the file COPYING in the root directory of the source tree for details.
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
-+# Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/gigaset/sx76x/ddr_settings.h b/board/gigaset/sx76x/ddr_settings.h
+new file mode 100644
+index 0000000..13cd81b
--- /dev/null
+++ b/board/gigaset/sx76x/ddr_settings.h
-@@ -0,0 +1,56 @@
+@@ -0,0 +1,55 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * generated with lantiq_ram_extract_magic.awk
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
+ *
-+ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
@@ -108,14 +113,16 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
+diff --git a/board/gigaset/sx76x/sx76x.c b/board/gigaset/sx76x/sx76x.c
+new file mode 100644
+index 0000000..71996a1
--- /dev/null
+++ b/board/gigaset/sx76x/sx76x.c
-@@ -0,0 +1,66 @@
+@@ -0,0 +1,65 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
-+ *
+ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
@@ -177,32 +184,36 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+ return switch_device_register(&adm6996i_dev);
+}
+diff --git a/boards.cfg b/boards.cfg
+index ea5c4f9..2163cdb 100644
--- a/boards.cfg
+++ b/boards.cfg
-@@ -447,6 +447,8 @@ pb1000 mips
- easy50712_nor mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_NOR
- easy50712_norspl mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_NORSPL
- easy50712_ram mips mips32 easy50712 lantiq danube easy50712:SYS_BOOT_RAM
-+gigasx76x_nor mips mips32 sx76x gigaset danube sx76x:SYS_BOOT_NOR
-+gigasx76x_ram mips mips32 sx76x gigaset danube sx76x:SYS_BOOT_RAM
- incaip mips mips32 incaip - incaip
- incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000
- incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000
+@@ -510,6 +510,8 @@ Active mips mips32 danube arcadyan arv7518pw
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle@gmail.com>
++Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube gigaset sx76x gigasx76x_ram sx76x:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/sx76x.h b/include/configs/sx76x.h
+new file mode 100644
+index 0000000..236851e
--- /dev/null
+++ b/include/configs/sx76x.h
-@@ -0,0 +1,71 @@
+@@ -0,0 +1,59 @@
+/*
-+ * This file is released under the terms of GPL v2 and any later version.
-+ * See the file COPYING in the root directory of the source tree for details.
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * Copyright (C) 2011 Luka Perkov <luka@openwrt.org>
++ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE "GIGASX76X"
-+#define CONFIG_IDENT_STRING " sx76x"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME "Gigaset sx76x"
+
+/* Configure SoC */
@@ -221,13 +232,12 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (256 * 1024)
-+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
-+#define CONFIG_ENV_SIZE (2 * 1024)
+#endif
+
++#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/* Console */
@@ -236,22 +246,12 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
-+/* Commands */
-+#define CONFIG_CMD_PING
-+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
-+/* Compression */
-+#define CONFIG_LZMA
-+
-+/* Auto boot */
-+#define CONFIG_BOOTDELAY 2
-+
-+/* Environment configuration */
-+#define CONFIG_BOOTCOMMAND \
-+ "run addeth; bootm ${kernel_addr}"
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
@@ -262,3 +262,6 @@ Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ "kernel_addr=0xB0040000\0"
+
+#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch b/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch
new file mode 100644
index 0000000..bd1bf58
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0031-MIPS-add-board-support-for-ZTE-ZXHN-H367N.patch
@@ -0,0 +1,327 @@
+From 0597056e2ba19ea783ef5c3d14c75c4722740e48 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 10 Mar 2013 17:59:56 +0100
+Subject: MIPS: add board support for ZTE ZXHN H367N
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+
+diff --git a/board/zte/zxhnh367n/Makefile b/board/zte/zxhnh367n/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/zte/zxhnh367n/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/zte/zxhnh367n/config.mk b/board/zte/zxhnh367n/config.mk
+new file mode 100644
+index 0000000..9d33739
+--- /dev/null
++++ b/board/zte/zxhnh367n/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/zte/zxhnh367n/ddr_settings.h b/board/zte/zxhnh367n/ddr_settings.h
+new file mode 100644
+index 0000000..b3f81de
+--- /dev/null
++++ b/board/zte/zxhnh367n/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * The values have been extracted from original ZTE U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000101
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x100
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000401
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+diff --git a/board/zte/zxhnh367n/zxhnh367n.c b/board/zte/zxhnh367n/zxhnh367n.c
+new file mode 100644
+index 0000000..f64f105
+--- /dev/null
++++ b/board/zte/zxhnh367n/zxhnh367n.c
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static void gpio_init(void)
++{
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: unused */
++ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC2: internal GPHY0 with 10/100 firmware for LAN port 1 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* GMAC3: internal GPHY0 with 10/100 firmware for LAN port 2 */
++ { 3, 0x12, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* GMAC4: internal GPHY1 with 10/100 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++ /* GMAC5: internal GPHY1 with 10/100 firmware for LAN port 4 */
++ { 5, 0x14, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_MII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ ltq_gphy_phy22f_a2x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(&eth_board_config);
++}
+diff --git a/boards.cfg b/boards.cfg
+index 2163cdb..4b18a26 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -527,6 +527,9 @@ Active mips mips32 vrx200 lantiq easy80920
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
++Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_nandspl zxhnh367n:SYS_BOOT_NANDSPL Luka Perkov <luka@openwrt.org>
++Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_ram zxhnh367n:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_zte zxhnh367n:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
+ Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
+ Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
+ Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
+diff --git a/include/configs/zxhnh367n.h b/include/configs/zxhnh367n.h
+new file mode 100644
+index 0000000..55d2e2a
+--- /dev/null
++++ b/include/configs/zxhnh367n.h
+@@ -0,0 +1,72 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ZXHN H367N"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZTE ZXHN H367N"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a NAND flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SYS_NAND_PAGE_COUNT 128
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (256 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++#if defined(CONFIG_SYS_BOOT_ZTE)
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NAND \
++ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NAND
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch b/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch
new file mode 100644
index 0000000..26a7935
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0032-MIPS-add-board-support-for-ZTE-ZXV10-H201L.patch
@@ -0,0 +1,271 @@
+From 2473526cf879ead429c6aa1fb7fb77ed3407baaa Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 9 Dec 2012 17:35:09 +0100
+Subject: MIPS: add board support for ZTE ZXV10 H201L
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/zte/zxv10h201l/Makefile b/board/zte/zxv10h201l/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/zte/zxv10h201l/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/zte/zxv10h201l/config.mk b/board/zte/zxv10h201l/config.mk
+new file mode 100644
+index 0000000..9d33739
+--- /dev/null
++++ b/board/zte/zxv10h201l/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/zte/zxv10h201l/ddr_settings.h b/board/zte/zxv10h201l/ddr_settings.h
+new file mode 100644
+index 0000000..8814957
+--- /dev/null
++++ b/board/zte/zxv10h201l/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * The values have been extracted from original ZTE U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x307
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x103
++#define MC_DC09_VALUE 0x80B
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xE02
++#define MC_DC12_VALUE 0x2C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x100
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xF
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0x1600
++#define MC_DC22_VALUE 0x1616
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5D
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x5FB
++#define MC_DC29_VALUE 0x35DF
++#define MC_DC30_VALUE 0x99E9
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x600
++#define MC_DC46_VALUE 0x0
+diff --git a/board/zte/zxv10h201l/zxv10h201l.c b/board/zte/zxv10h201l/zxv10h201l.c
+new file mode 100644
+index 0000000..8218a9d
+--- /dev/null
++++ b/board/zte/zxv10h201l/zxv10h201l.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: REALTEK RTL8306 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device rtl8306_dev = {
++ .name = "rtl8306",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&rtl8306_dev);
++}
+diff --git a/boards.cfg b/boards.cfg
+index 4b18a26..4362856 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -496,6 +496,9 @@ Active mips mips32 - micronas vct
+ Active mips mips32 - micronas vct vct_premium_onenand vct:VCT_PREMIUM,VCT_ONENAND -
+ Active mips mips32 - micronas vct vct_premium_onenand_small vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE -
+ Active mips mips32 - micronas vct vct_premium_small vct:VCT_PREMIUM,VCT_SMALL_IMAGE -
++Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
+ Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange <thomas@corelatus.se>
+diff --git a/include/configs/zxv10h201l.h b/include/configs/zxv10h201l.h
+new file mode 100644
+index 0000000..bfe116d
+--- /dev/null
++++ b/include/configs/zxv10h201l.h
+@@ -0,0 +1,77 @@
++/*
++ * Copyright (C) 2011 Daniel Schwierzeck, daniel.schwierzeck@googlemail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ZXV10 H201L"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZTE ZXV10 H201L"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_RTL8306
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (128 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++#if defined(CONFIG_SYS_BOOT_ZTE)
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++#if defined(CONFIG_SYS_BOOT_ZTE)
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch
new file mode 100644
index 0000000..ffe9b9f
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0033-MIPS-add-board-support-for-ZyXEL-P-661HNU-Fx.patch
@@ -0,0 +1,324 @@
+From a18f994f373db4467a4680f83ead997c8122908e Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Wed, 22 May 2013 17:48:08 +0200
+Subject: MIPS: add board support for ZyXEL P-661HNU-Fx
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/zyxel/p661hnufx/Makefile b/board/zyxel/p661hnufx/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/zyxel/p661hnufx/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/zyxel/p661hnufx/config.mk b/board/zyxel/p661hnufx/config.mk
+new file mode 100644
+index 0000000..9d33739
+--- /dev/null
++++ b/board/zyxel/p661hnufx/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/zyxel/p661hnufx/ddr_settings.h b/board/zyxel/p661hnufx/ddr_settings.h
+new file mode 100644
+index 0000000..83693b8
+--- /dev/null
++++ b/board/zyxel/p661hnufx/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * The values have been extracted from original ZyXEL U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x307
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x103
++#define MC_DC09_VALUE 0x80B
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xE02
++#define MC_DC12_VALUE 0x2C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x100
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xF
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0x1600
++#define MC_DC22_VALUE 0x1616
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5D
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x5FB
++#define MC_DC29_VALUE 0x35DF
++#define MC_DC30_VALUE 0x99E9
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x600
++#define MC_DC46_VALUE 0x0
+diff --git a/board/zyxel/p661hnufx/p661hnufx.c b/board/zyxel/p661hnufx/p661hnufx.c
+new file mode 100644
+index 0000000..dfaca51
+--- /dev/null
++++ b/board/zyxel/p661hnufx/p661hnufx.c
+@@ -0,0 +1,102 @@
++/*
++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++static void gpio_init(void)
++{
++ /* SPI CS 0.4 to serial flash */
++ gpio_direction_output(10, 1);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Lantiq Tantos switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++ /* MAC1: unused */
++ { 1, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device psb697x_dev = {
++ .name = "psb697x",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ printf("%s\n", __func__);
++
++#if 0
++ ltq_reset_once(LTQ_RESET_HARD, 200000);
++ __udelay(50000);
++#endif
++
++ return switch_device_register(&psb697x_dev);
++}
++
++int spi_cs_is_valid(unsigned int bus, unsigned int cs)
++{
++ if (bus)
++ return 0;
++
++ if (cs == 4)
++ return 1;
++
++ return 0;
++}
++
++void spi_cs_activate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 0);
++ break;
++ default:
++ break;
++ }
++}
++
++void spi_cs_deactivate(struct spi_slave *slave)
++{
++ switch (slave->cs) {
++ case 4:
++ gpio_set_value(10, 1);
++ break;
++ default:
++ break;
++ }
++}
+diff --git a/boards.cfg b/boards.cfg
+index 4362856..e505203 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -499,6 +499,9 @@ Active mips mips32 - micronas vct
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org>
+ Active mips mips32 au1x00 - dbau1x00 dbau1000 dbau1x00:DBAU1000 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1100 dbau1x00:DBAU1100 Thomas Lange <thomas@corelatus.se>
+ Active mips mips32 au1x00 - dbau1x00 dbau1500 dbau1x00:DBAU1500 Thomas Lange <thomas@corelatus.se>
+diff --git a/include/configs/p661hnufx.h b/include/configs/p661hnufx.h
+new file mode 100644
+index 0000000..85e3e1e
+--- /dev/null
++++ b/include/configs/p661hnufx.h
+@@ -0,0 +1,79 @@
++/*
++ * Copyright (C) 2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "P-661HNU-Fx"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZyXEL P-661HNU-Fx"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_SPI_FLASH
++#define CONFIG_SPI_FLASH_MACRONIX /* Supports Macronix serial flash */
++#define CONFIG_SPI_FLASH_4BYTE_MODE
++
++#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SPL_SPI_BUS 0
++#define CONFIG_SPL_SPI_CS 4
++#define CONFIG_SPL_SPI_MAX_HZ 25000000
++#define CONFIG_SPL_SPI_MODE 0
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_PSB697X
++
++/* Environment */
++#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
++#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
++#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
++
++#if defined(CONFIG_SYS_BOOT_SFSPL)
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (512 * 1024)
++#define CONFIG_ENV_SECT_SIZE (256 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++#if defined(CONFIG_SYS_BOOT_ZYXEL)
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_SF \
++ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_SF
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch b/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch
new file mode 100644
index 0000000..0cbcd6c
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0034-MIPS-add-board-support-for-ZyXEL-P-2601HN-Fx.patch
@@ -0,0 +1,262 @@
+From 4bfa74583bc938d2da41f255f22baa1845332893 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Tue, 12 Mar 2013 01:42:46 +0100
+Subject: MIPS: add board support for ZyXEL P-2601HN-Fx
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+
+diff --git a/board/zyxel/p2601hnfx/Makefile b/board/zyxel/p2601hnfx/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/zyxel/p2601hnfx/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/zyxel/p2601hnfx/config.mk b/board/zyxel/p2601hnfx/config.mk
+new file mode 100644
+index 0000000..9d33739
+--- /dev/null
++++ b/board/zyxel/p2601hnfx/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/zyxel/p2601hnfx/ddr_settings.h b/board/zyxel/p2601hnfx/ddr_settings.h
+new file mode 100644
+index 0000000..92af4fa
+--- /dev/null
++++ b/board/zyxel/p2601hnfx/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * The values have been extracted from original ZyXEL U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x306
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x144
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1900
++#define MC_DC22_VALUE 0x1919
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x66
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x50A
++#define MC_DC29_VALUE 0x2D65
++#define MC_DC30_VALUE 0x81B1
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x600
++#define MC_DC46_VALUE 0x0
+diff --git a/board/zyxel/p2601hnfx/p2601hnfx.c b/board/zyxel/p2601hnfx/p2601hnfx.c
+new file mode 100644
+index 0000000..6a69af9
+--- /dev/null
++++ b/board/zyxel/p2601hnfx/p2601hnfx.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: REALTEK RTL8306 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device rtl8306_dev = {
++ .name = "rtl8306",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&rtl8306_dev);
++}
+diff --git a/boards.cfg b/boards.cfg
+index e505203..45c2aa0 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -499,6 +499,10 @@ Active mips mips32 - micronas vct
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_nor zxv10h201l:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_ram zxv10h201l:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zte zxv10h201l zxv10h201l_zte zxv10h201l:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_nor p2601hnfx:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_norspl p2601hnfx:SYS_BOOT_NORSPL Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_ram p2601hnfx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 arx100 zyxel p2601hnfx p2601hnfx_zyxel p2601hnfx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zyxel p661hnufx p661hnufx_ram p661hnufx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zyxel p661hnufx p661hnufx_sfspl p661hnufx:SYS_BOOT_SFSPL Luka Perkov <luka@openwrt.org>
+ Active mips mips32 arx100 zyxel p661hnufx p661hnufx_zyxel p661hnufx:SYS_BOOT_ZYXEL Luka Perkov <luka@openwrt.org>
+diff --git a/include/configs/p2601hnfx.h b/include/configs/p2601hnfx.h
+new file mode 100644
+index 0000000..5cba30f
+--- /dev/null
++++ b/include/configs/p2601hnfx.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "P-2601HN-Fx"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZyXEL P-2601HN-Fx"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#elif defined(CONFIG_SYS_BOOT_NORSPL)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (128 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++#if defined(CONFIG_SYS_BOOT_ZYXEL)
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
new file mode 100644
index 0000000..c68a6ae
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0035-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch
@@ -0,0 +1,321 @@
+From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Tue, 6 Aug 2013 22:51:00 +0200
+Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+
+diff --git a/board/zyxel/p2812hnufx/Makefile b/board/zyxel/p2812hnufx/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/zyxel/p2812hnufx/config.mk b/board/zyxel/p2812hnufx/config.mk
+new file mode 100644
+index 0000000..9d33739
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/zyxel/p2812hnufx/ddr_settings.h b/board/zyxel/p2812hnufx/ddr_settings.h
+new file mode 100644
+index 0000000..128c42e
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/ddr_settings.h
+@@ -0,0 +1,70 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * The values have been extracted from original ZyXEL U-Boot.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x0
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000300
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401B04
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1D445D
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x141F04
++#define MC_CCR40_VALUE 0x142704
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7800301
++#define MC_CCR58_VALUE 0x7800301
++#define MC_CCR59_VALUE 0x7800301
++#define MC_CCR60_VALUE 0x7800301
++#define MC_CCR61_VALUE 0x4
+diff --git a/board/zyxel/p2812hnufx/p2812hnufx.c b/board/zyxel/p2812hnufx/p2812hnufx.c
+new file mode 100644
+index 0000000..cd2f819
+--- /dev/null
++++ b/board/zyxel/p2812hnufx/p2812hnufx.c
+@@ -0,0 +1,97 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static void gpio_init(void)
++{
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
++ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
++ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_addr = 0x80FF0000;
++
++ ltq_gphy_phy11g_a1x_load(fw_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_addr);
++ ltq_rcu_gphy_boot(1, fw_addr);
++
++ return ltq_eth_initialize(&eth_board_config);
++}
+diff --git a/boards.cfg b/boards.cfg
+index 45c2aa0..0cbf756 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -540,6 +540,8 @@ Active mips mips32 vrx200 lantiq easy80920
+ Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_nandspl zxhnh367n:SYS_BOOT_NANDSPL Luka Perkov <luka@openwrt.org>
+ Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_ram zxhnh367n:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 vrx200 zte zxhnh367n zxhnh367n_zte zxhnh367n:SYS_BOOT_ZTE Luka Perkov <luka@openwrt.org>
++Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_nandspl p2812hnufx:SYS_BOOT_NANDSPL Luka Perkov <luka@openwrt.org>
++Active mips mips32 vrx200 zyxel p2812hnufx p2812hnufx_ram p2812hnufx:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
+ Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
+ Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
+diff --git a/include/configs/p2812hnufx.h b/include/configs/p2812hnufx.h
+new file mode 100644
+index 0000000..6806eb1
+--- /dev/null
++++ b/include/configs/p2812hnufx.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "P-2812HNU-Fx"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "ZyXEL P-2812HNU-Fx"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH /* Have a K9F1G08U0D NAND flash */
++
++#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH /* Build NAND flash SPL */
++#define CONFIG_LTQ_SPL_COMP_LZO /* Compress SPL with LZO */
++#define CONFIG_LTQ_SPL_CONSOLE /* Enable SPL console */
++
++#define CONFIG_SYS_NAND_PAGE_COUNT 64
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x4000
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NANDSPL)
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NAND \
++ "update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NAND
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch b/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch
new file mode 100644
index 0000000..fbb31e5
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0036-MIPS-add-board-support-for-Arcadyan-Easybox-904.patch
@@ -0,0 +1,297 @@
+From 60856fa8f9866f292df740ea98752a70738eb59a Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Fri, 9 Aug 2013 18:11:07 +0200
+Subject: MIPS: add board support for Arcadyan Easybox 904
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/arcadyan/easybox904/Makefile b/board/arcadyan/easybox904/Makefile
+new file mode 100644
+index 0000000..0380dea
+--- /dev/null
++++ b/board/arcadyan/easybox904/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/arcadyan/easybox904/config.mk b/board/arcadyan/easybox904/config.mk
+new file mode 100644
+index 0000000..9d8953b
+--- /dev/null
++++ b/board/arcadyan/easybox904/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/easybox904/ddr_settings.h b/board/arcadyan/easybox904/ddr_settings.h
+new file mode 100644
+index 0000000..24541bc
+--- /dev/null
++++ b/board/arcadyan/easybox904/ddr_settings.h
+@@ -0,0 +1,68 @@
++/*
++ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_CCR00_VALUE 0x101
++#define MC_CCR01_VALUE 0x1000100
++#define MC_CCR02_VALUE 0x1010000
++#define MC_CCR03_VALUE 0x101
++#define MC_CCR04_VALUE 0x1000000
++#define MC_CCR05_VALUE 0x1000101
++#define MC_CCR06_VALUE 0x1000100
++#define MC_CCR07_VALUE 0x1010000
++#define MC_CCR08_VALUE 0x1000101
++#define MC_CCR09_VALUE 0x1000000
++#define MC_CCR10_VALUE 0x2000100
++#define MC_CCR11_VALUE 0x2000300
++#define MC_CCR12_VALUE 0x30000
++#define MC_CCR13_VALUE 0x202
++#define MC_CCR14_VALUE 0x7080A0F
++#define MC_CCR15_VALUE 0x2040F
++#define MC_CCR16_VALUE 0x40000
++#define MC_CCR17_VALUE 0x70102
++#define MC_CCR18_VALUE 0x4020002
++#define MC_CCR19_VALUE 0x30302
++#define MC_CCR20_VALUE 0x8000700
++#define MC_CCR21_VALUE 0x40F020A
++#define MC_CCR22_VALUE 0x0
++#define MC_CCR23_VALUE 0xC020000
++#define MC_CCR24_VALUE 0x4401503
++#define MC_CCR25_VALUE 0x0
++#define MC_CCR26_VALUE 0x0
++#define MC_CCR27_VALUE 0x6420000
++#define MC_CCR28_VALUE 0x0
++#define MC_CCR29_VALUE 0x0
++#define MC_CCR30_VALUE 0x798
++#define MC_CCR31_VALUE 0x0
++#define MC_CCR32_VALUE 0x0
++#define MC_CCR33_VALUE 0x650000
++#define MC_CCR34_VALUE 0x200C8
++#define MC_CCR35_VALUE 0x1536B0
++#define MC_CCR36_VALUE 0xC8
++#define MC_CCR37_VALUE 0xC351
++#define MC_CCR38_VALUE 0x0
++#define MC_CCR39_VALUE 0x142404
++#define MC_CCR40_VALUE 0x142604
++#define MC_CCR41_VALUE 0x141B42
++#define MC_CCR42_VALUE 0x141B42
++#define MC_CCR43_VALUE 0x566504
++#define MC_CCR44_VALUE 0x566504
++#define MC_CCR45_VALUE 0x565F17
++#define MC_CCR46_VALUE 0x565F17
++#define MC_CCR47_VALUE 0x0
++#define MC_CCR48_VALUE 0x0
++#define MC_CCR49_VALUE 0x0
++#define MC_CCR50_VALUE 0x0
++#define MC_CCR51_VALUE 0x0
++#define MC_CCR52_VALUE 0x133
++#define MC_CCR53_VALUE 0xF3014B27
++#define MC_CCR54_VALUE 0xF3014B27
++#define MC_CCR55_VALUE 0xF3014B27
++#define MC_CCR56_VALUE 0xF3014B27
++#define MC_CCR57_VALUE 0x7C00301
++#define MC_CCR58_VALUE 0x7C00301
++#define MC_CCR59_VALUE 0x7C00301
++#define MC_CCR60_VALUE 0x7C00301
++#define MC_CCR61_VALUE 0x4
+diff --git a/board/arcadyan/easybox904/easybox904.c b/board/arcadyan/easybox904/easybox904.c
+new file mode 100644
+index 0000000..4dbe044
+--- /dev/null
++++ b/board/arcadyan/easybox904/easybox904.c
+@@ -0,0 +1,98 @@
++/*
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <spi.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++#include <asm/arch/gphy.h>
++
++#if defined(CONFIG_SPL_BUILD)
++#define do_gpio_init 1
++#define do_pll_init 1
++#define do_dcdc_init 0
++#elif defined(CONFIG_SYS_BOOT_RAM)
++#define do_gpio_init 1
++#define do_pll_init 0
++#define do_dcdc_init 1
++#else
++#define do_gpio_init 0
++#define do_pll_init 0
++#define do_dcdc_init 1
++#endif
++
++static inline void gpio_init(void)
++{
++ /* EBU.FL_CS1 as output for NAND CE */
++ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A23 as output for NAND CLE */
++ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* EBU.FL_A24 as output for NAND ALE */
++ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++ /* GPIO 3.0 as input for NAND Ready Busy */
++ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
++ /* GPIO 3.1 as output for NAND Read */
++ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
++}
++
++int board_early_init_f(void)
++{
++ if (do_gpio_init)
++ gpio_init();
++
++ if (do_pll_init)
++ ltq_pll_init();
++
++ if (do_dcdc_init)
++ ltq_dcdc_init(0x7F);
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: ??? */
++ { 0, 0x0, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE },
++ /* GMAC1: ??? */
++ { 1, 0x1, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE },
++ /* GMAC2: ??? */
++ { 2, 0x11, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE },
++ /* GMAC3: unused */
++ { 3, 0x0, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE },
++ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for WANoE port */
++ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
++ /* GMAC5: ??? */
++ { 5, 0x5, LTQ_ETH_PORT_NONE, LTQ_ETH_PORT_NONE },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t * bis)
++{
++ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
++ const ulong fw_ge_addr = 0x80FE0000;
++
++ ltq_gphy_phy11g_a2x_load(fw_ge_addr);
++
++ ltq_cgu_gphy_clk_src(clk);
++
++ ltq_rcu_gphy_boot(0, fw_ge_addr);
++ ltq_rcu_gphy_boot(1, fw_ge_addr);
++
++ return ltq_eth_initialize(&eth_board_config);
++}
+diff --git a/boards.cfg b/boards.cfg
+index 0cbf756..f10be39 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -529,6 +529,7 @@ Active mips mips32 incaip - incaip
+ Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
+ Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
++Active mips mips32 vrx200 arcadyan easybox904 easybox904_ram easybox904:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_eva fb3370:SYS_BOOT_EVA Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_ram fb3370:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ Active mips mips32 vrx200 avm fb3370 fb3370_sfspl fb3370:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+diff --git a/include/configs/easybox904.h b/include/configs/easybox904.h
+new file mode 100644
+index 0000000..c892d77
+--- /dev/null
++++ b/include/configs/easybox904.h
+@@ -0,0 +1,45 @@
++/*
++ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "EASYBOX904"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan EasyBox 904"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NAND_FLASH
++
++#define CONFIG_SYS_DRAM_PROBE
++
++/* Environment */
++#define CONFIG_ENV_IS_NOWHERE
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY VRX200 */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch b/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
new file mode 100644
index 0000000..31b6b76
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0037-MIPS-add-board-support-for-Arcadyan-ARV752DPW.patch
@@ -0,0 +1,262 @@
+From fbdbf2ddf2b34d675d53de679c179788b0604c1a Mon Sep 17 00:00:00 2001
+From: Oliver Muth <dr.o.muth@gmx.de>
+Date: Sat, 12 Oct 2013 16:49:53 +0200
+Subject: MIPS: add board support for Arcadyan ARV752DPW
+
+Signed-off-by: Oliver Muth <dr.o.muth@gmx.de>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/arcadyan/arv752dpw/Makefile b/board/arcadyan/arv752dpw/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/arcadyan/arv752dpw/arv752dpw.c b/board/arcadyan/arv752dpw/arv752dpw.c
+new file mode 100644
+index 0000000..d555904
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/arv752dpw.c
+@@ -0,0 +1,51 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ * Copyright (C) 2013 Oliver Muth <dr.o.muth@gmx.de>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Realtek rtl8306 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++static struct switch_device rtl8306_dev = {
++ .name = "rtl8306",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&rtl8306_dev);
++}
+diff --git a/board/arcadyan/arv752dpw/config.mk b/board/arcadyan/arv752dpw/config.mk
+new file mode 100644
+index 0000000..9d8953b
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/arv752dpw/ddr_settings.h b/board/arcadyan/arv752dpw/ddr_settings.h
+new file mode 100644
+index 0000000..a226322
+--- /dev/null
++++ b/board/arcadyan/arv752dpw/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index f10be39..79cba2d 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -518,6 +518,9 @@ Active mips mips32 danube arcadyan arv4519pw
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
++Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+diff --git a/include/configs/arv752dpw.h b/include/configs/arv752dpw.h
+new file mode 100644
+index 0000000..f6d6092
+--- /dev/null
++++ b/include/configs/arv752dpw.h
+@@ -0,0 +1,67 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV752DPW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_RTL8206
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch b/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
new file mode 100644
index 0000000..9e7b739
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0038-MIPS-add-board-support-for-Arcadyan-ARV752DPW22.patch
@@ -0,0 +1,264 @@
+From 09f411b4d10f10a62f147264121bb853b4649c3e Mon Sep 17 00:00:00 2001
+From: Oliver Muth <dr.o.muth@gmx.de>
+Date: Sat, 12 Oct 2013 16:49:53 +0200
+Subject: MIPS: add board support for Arcadyan ARV752DPW22
+
+Signed-off-by: Oliver Muth <dr.o.muth@gmx.de>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/arcadyan/arv752dpw22/Makefile b/board/arcadyan/arv752dpw22/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/arcadyan/arv752dpw22/arv752dpw22.c b/board/arcadyan/arv752dpw22/arv752dpw22.c
+new file mode 100644
+index 0000000..9b2d89f
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/arv752dpw22.c
+@@ -0,0 +1,52 @@
++/*
++ * Copyright (C) 2012 Luka Perkov <luka@openwrt.org>
++ * Copyright (C) 2013 Oliver Muth <dr.o.muth@gmx.de>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++
++int board_early_init_f(void)
++{
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: Atheros ar8216 switch */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_MII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device ar8216_dev = {
++ .name = "ar8216",
++ .cpu_port = 0,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ return switch_device_register(&ar8216_dev);
++}
+diff --git a/board/arcadyan/arv752dpw22/config.mk b/board/arcadyan/arv752dpw22/config.mk
+new file mode 100644
+index 0000000..9d8953b
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/arv752dpw22/ddr_settings.h b/board/arcadyan/arv752dpw22/ddr_settings.h
+new file mode 100644
+index 0000000..a226322
+--- /dev/null
++++ b/board/arcadyan/arv752dpw22/ddr_settings.h
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2011-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * This file has been generated with lantiq_ram_extract_magic.awk script.
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x134
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA03
++#define MC_DC21_VALUE 0x1400
++#define MC_DC22_VALUE 0x1414
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x5B
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index 79cba2d..287f974 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -521,6 +521,9 @@ Active mips mips32 danube arcadyan arv7518pw
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_brn arv752dpw:SYS_BOOT_BRN -
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_nor arv752dpw:SYS_BOOT_NOR -
+ Active mips mips32 danube arcadyan arv752dpw arv752dpw_ram arv752dpw:SYS_BOOT_RAM -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_brn arv752dpw22:SYS_BOOT_BRN -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_nor arv752dpw22:SYS_BOOT_NOR -
++Active mips mips32 danube arcadyan arv752dpw22 arv752dpw22_ram arv752dpw22:SYS_BOOT_RAM -
+ Active mips mips32 danube audiocodes acmp252 acmp252_nor acmp252:SYS_BOOT_NOR Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube audiocodes acmp252 acmp252_ram acmp252:SYS_BOOT_RAM Daniel Golle <daniel.golle@gmail.com>
+ Active mips mips32 danube gigaset sx76x gigasx76x_nor sx76x:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+diff --git a/include/configs/arv752dpw22.h b/include/configs/arv752dpw22.h
+new file mode 100644
+index 0000000..f17aa70
+--- /dev/null
++++ b/include/configs/arv752dpw22.h
+@@ -0,0 +1,68 @@
++/*
++ * Copyright (C) 2012-2013 Luka Perkov <luka@openwrt.org>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV752DPW22"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV752DPW22"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_AR8216
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (192 * 1024)
++#define CONFIG_ENV_SECT_SIZE (64 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Burnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0040000\0"
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch b/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch
new file mode 100644
index 0000000..de39b4f
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0039-MIPS-add-board-support-for-Arcadyan-ARV7510.patch
@@ -0,0 +1,289 @@
+From ba27086a5174130d138d645c2f4a49b08c3f2386 Mon Sep 17 00:00:00 2001
+From: Matti Laakso <malaakso@elisanet.fi>
+Date: Sat, 2 Mar 2013 23:34:00 +0100
+Subject: MIPS: add board support for Arcadyan ARV7510
+
+Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/board/arcadyan/arv7510pw/Makefile b/board/arcadyan/arv7510pw/Makefile
+new file mode 100644
+index 0000000..3a547c2
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/Makefile
+@@ -0,0 +1,27 @@
++#
++# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = $(obj)lib$(BOARD).o
++
++COBJS = $(BOARD).o
++
++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
++OBJS := $(addprefix $(obj),$(COBJS))
++SOBJS := $(addprefix $(obj),$(SOBJS))
++
++$(LIB): $(obj).depend $(OBJS) $(SOBJS)
++ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
++
++#########################################################################
++
++# defines $(obj).depend target
++include $(SRCTREE)/rules.mk
++
++sinclude $(obj).depend
++
++#########################################################################
+diff --git a/board/arcadyan/arv7510pw/arv7510pw.c b/board/arcadyan/arv7510pw/arv7510pw.c
+new file mode 100644
+index 0000000..6880b4c
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/arv7510pw.c
+@@ -0,0 +1,72 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso@elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <switch.h>
++#include <asm/gpio.h>
++#include <asm/lantiq/eth.h>
++#include <asm/lantiq/reset.h>
++#include <asm/lantiq/chipid.h>
++#include <asm/lantiq/cpu.h>
++
++static void gpio_init(void)
++{
++ /* Initialize SSIO GPIOs */
++ gpio_set_altfunc(4, 1, 0, 1);
++ gpio_set_altfunc(5, 1, 0, 1);
++ gpio_set_altfunc(6, 1, 0, 1);
++ ltq_gpio_init();
++
++ /* Power led on */
++ gpio_direction_output(76, 1);
++}
++
++int board_early_init_f(void)
++{
++ gpio_init();
++
++ return 0;
++}
++
++int checkboard(void)
++{
++ puts("Board: " CONFIG_BOARD_NAME "\n");
++ ltq_chip_print_info();
++
++ return 0;
++}
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* MAC0: ADM6996I */
++ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
++};
++
++static const struct ltq_eth_board_config eth_board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++int board_eth_init(bd_t *bis)
++{
++ return ltq_eth_initialize(&eth_board_config);
++}
++
++static struct switch_device adm6996i_dev = {
++ .name = "adm6996i",
++ .cpu_port = 5,
++ .port_mask = 0xF,
++};
++
++int board_switch_init(void)
++{
++ /* Deactivate HRST line to release reset of ADM6996I switch */
++ ltq_reset_once(LTQ_RESET_HARD, 200000);
++
++ /* ADM6996I needs some time to come out of reset */
++ __udelay(50000);
++
++ return switch_device_register(&adm6996i_dev);
++}
+diff --git a/board/arcadyan/arv7510pw/config.mk b/board/arcadyan/arv7510pw/config.mk
+new file mode 100644
+index 0000000..9d8953b
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/config.mk
+@@ -0,0 +1,7 @@
++#
++# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
+diff --git a/board/arcadyan/arv7510pw/ddr_settings.h b/board/arcadyan/arv7510pw/ddr_settings.h
+new file mode 100644
+index 0000000..e63f591
+--- /dev/null
++++ b/board/arcadyan/arv7510pw/ddr_settings.h
+@@ -0,0 +1,53 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso@elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#define MC_DC00_VALUE 0x1B1B
++#define MC_DC01_VALUE 0x0
++#define MC_DC02_VALUE 0x0
++#define MC_DC03_VALUE 0x0
++#define MC_DC04_VALUE 0x0
++#define MC_DC05_VALUE 0x200
++#define MC_DC06_VALUE 0x605
++#define MC_DC07_VALUE 0x303
++#define MC_DC08_VALUE 0x102
++#define MC_DC09_VALUE 0x70A
++#define MC_DC10_VALUE 0x203
++#define MC_DC11_VALUE 0xC02
++#define MC_DC12_VALUE 0x1C8
++#define MC_DC13_VALUE 0x1
++#define MC_DC14_VALUE 0x0
++#define MC_DC15_VALUE 0x120
++#define MC_DC16_VALUE 0xC800
++#define MC_DC17_VALUE 0xD
++#define MC_DC18_VALUE 0x301
++#define MC_DC19_VALUE 0x200
++#define MC_DC20_VALUE 0xA04
++#define MC_DC21_VALUE 0x1700
++#define MC_DC22_VALUE 0x1717
++#define MC_DC23_VALUE 0x0
++#define MC_DC24_VALUE 0x52
++#define MC_DC25_VALUE 0x0
++#define MC_DC26_VALUE 0x0
++#define MC_DC27_VALUE 0x0
++#define MC_DC28_VALUE 0x510
++#define MC_DC29_VALUE 0x4E20
++#define MC_DC30_VALUE 0x8235
++#define MC_DC31_VALUE 0x0
++#define MC_DC32_VALUE 0x0
++#define MC_DC33_VALUE 0x0
++#define MC_DC34_VALUE 0x0
++#define MC_DC35_VALUE 0x0
++#define MC_DC36_VALUE 0x0
++#define MC_DC37_VALUE 0x0
++#define MC_DC38_VALUE 0x0
++#define MC_DC39_VALUE 0x0
++#define MC_DC40_VALUE 0x0
++#define MC_DC41_VALUE 0x0
++#define MC_DC42_VALUE 0x0
++#define MC_DC43_VALUE 0x0
++#define MC_DC44_VALUE 0x0
++#define MC_DC45_VALUE 0x500
++#define MC_DC46_VALUE 0x0
+diff --git a/boards.cfg b/boards.cfg
+index 287f974..29156d4 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -515,6 +515,9 @@ Active mips mips32 au1x00 - pb1x00
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_brn arv4519pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_nor arv4519pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv4519pw arv4519pw_ram arv4519pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_brn arv7510pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_nor arv7510pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
++Active mips mips32 danube arcadyan arv7510pw arv7510pw_ram arv7510pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_brn arv7518pw:SYS_BOOT_BRN Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_nor arv7518pw:SYS_BOOT_NOR Luka Perkov <luka@openwrt.org>
+ Active mips mips32 danube arcadyan arv7518pw arv7518pw_ram arv7518pw:SYS_BOOT_RAM Luka Perkov <luka@openwrt.org>
+diff --git a/include/configs/arv7510pw.h b/include/configs/arv7510pw.h
+new file mode 100644
+index 0000000..9eacfa1
+--- /dev/null
++++ b/include/configs/arv7510pw.h
+@@ -0,0 +1,75 @@
++/*
++ * Copyright (C) 2013 Matti Laakso <malaakso@elisanet.fi>
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++#define CONFIG_MACH_TYPE "ARV7510PW"
++#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
++#define CONFIG_BOARD_NAME "Arcadyan ARV7510PW"
++
++/* Configure SoC */
++#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
++#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
++#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
++
++/* Switch devices */
++#define CONFIG_SWITCH_MULTI
++#define CONFIG_SWITCH_ADM6996I
++
++/* SSIO */
++#define CONFIG_LTQ_SSIO_SHIFT_REGS
++#define CONFIG_LTQ_SSIO_EDGE_FALLING
++#define CONFIG_LTQ_SSIO_GPHY1_MODE 0
++#define CONFIG_LTQ_SSIO_GPHY2_MODE 0
++#define CONFIG_LTQ_SSIO_INIT_VALUE 0
++
++/* Environment */
++#if defined(CONFIG_SYS_BOOT_NOR)
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_OVERWRITE
++#define CONFIG_ENV_OFFSET (256 * 1024)
++#define CONFIG_ENV_SECT_SIZE (128 * 1024)
++#else
++#define CONFIG_ENV_IS_NOWHERE
++#endif
++
++#define CONFIG_ENV_SIZE (8 * 1024)
++#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
++
++/* Brnboot loadable image */
++#if defined(CONFIG_SYS_BOOT_BRN)
++#define CONFIG_SYS_TEXT_BASE 0x80002000
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_DISABLE_CACHE
++#define CONFIG_ENV_OVERWRITE 1
++#endif
++
++/* Console */
++#define CONFIG_LTQ_ADVANCED_CONSOLE
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_CONSOLE_ASC 1
++#define CONFIG_CONSOLE_DEV "ttyLTQ1"
++
++/* Pull in default board configs for Lantiq XWAY Danube */
++#include <asm/lantiq/config.h>
++#include <asm/arch/config.h>
++
++/* Buffered write broken in ARV7510PW */
++#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
++
++/* Pull in default OpenWrt configs for Lantiq SoC */
++#include "openwrt-lantiq-common.h"
++
++#define CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "update-uboot-nor=run load-uboot-nor write-uboot-nor\0"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ CONFIG_ENV_LANTIQ_DEFAULTS \
++ CONFIG_ENV_UPDATE_UBOOT_NOR \
++ "kernel_addr=0xB0060000\0"
++
++#endif /* __CONFIG_H */
+--
+1.8.3.2
+
diff --git a/package/boot/uboot-lantiq/patches/0040-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch b/package/boot/uboot-lantiq/patches/0040-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
new file mode 100644
index 0000000..0b385eb
--- /dev/null
+++ b/package/boot/uboot-lantiq/patches/0040-Makefile-prepare-u-boot-lantiq-v2013.10-openwrt4.patch
@@ -0,0 +1,23 @@
+From 7e2f79bc40b572763a4a1ed69f63aa2eaa6df254 Mon Sep 17 00:00:00 2001
+From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Date: Sun, 20 Oct 2013 19:39:17 +0200
+Subject: Makefile: prepare u-boot-lantiq-v2013.10-openwrt4
+
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+
+diff --git a/Makefile b/Makefile
+index 0445035..d5a55f8 100644
+--- a/Makefile
++++ b/Makefile
+@@ -8,7 +8,7 @@
+ VERSION = 2013
+ PATCHLEVEL = 10
+ SUBLEVEL =
+-EXTRAVERSION =
++EXTRAVERSION = -openwrt4
+ ifneq "$(SUBLEVEL)" ""
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+ else
+--
+1.8.3.2
+