summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/kirkwood/Makefile2
-rw-r--r--target/linux/kirkwood/config-3.33
-rw-r--r--target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c190
-rw-r--r--target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c189
-rw-r--r--target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c273
-rw-r--r--target/linux/kirkwood/patches-3.3/200-iconnect.patch218
-rw-r--r--target/linux/kirkwood/patches-3.3/201-raidsonic-IB-NAS62x0-support.patch216
-rw-r--r--target/linux/kirkwood/patches-3.3/202-zyxel-nsa-310.patch300
-rw-r--r--target/linux/kirkwood/patches/000-boards.patch38
-rw-r--r--target/linux/kirkwood/patches/001-partition_map.patch (renamed from target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch)0
-rw-r--r--target/linux/kirkwood/patches/002-mvsdio_delay.patch (renamed from target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch)0
-rw-r--r--target/linux/kirkwood/profiles/100-Sheevaplug.mk17
-rw-r--r--target/linux/kirkwood/profiles/200-Dockstar.mk17
-rw-r--r--target/linux/kirkwood/profiles/300-Iconnect.mk17
14 files changed, 693 insertions, 787 deletions
diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile
index da44def..f4e6703 100644
--- a/target/linux/kirkwood/Makefile
+++ b/target/linux/kirkwood/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2009-2011 OpenWrt.org
+# Copyright (C) 2009-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
diff --git a/target/linux/kirkwood/config-3.3 b/target/linux/kirkwood/config-3.3
index b1cace7..d5234f4 100644
--- a/target/linux/kirkwood/config-3.3
+++ b/target/linux/kirkwood/config-3.3
@@ -11,7 +11,7 @@ CONFIG_ARM=y
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
# CONFIG_ARM_THUMB is not set
# CONFIG_ARPD is not set
CONFIG_BCMA_POSSIBLE=y
@@ -150,6 +150,7 @@ CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
+CONFIG_PHYS_OFFSET=0x0
CONFIG_PLAT_ORION=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RTC_CLASS=y
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
new file mode 100644
index 0000000..4e8d192
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_1M + SZ_2M
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+ {
+ .name = "iconnect:blue:power",
+ .default_trigger = "default-on",
+ .gpio = 42,
+ },
+ {
+ .name = "iconnect:red:power",
+ .gpio = 43,
+ },
+ {
+ .name = "iconnect:blue:usb1",
+ .gpio = 44,
+ },
+ {
+ .name = "iconnect:blue:usb2",
+ .gpio = 45,
+ },
+ {
+ .name = "iconnect:blue:usb3",
+ .gpio = 46,
+ },
+ {
+ .name = "iconnect:blue:usb4",
+ .gpio = 47,
+ },
+ {
+ .name = "iconnect:blue:otb",
+ .gpio = 48,
+ },
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+ .leds = iconnect_led_pins,
+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &iconnect_led_data,
+ }
+};
+
+#define ICONNECT_GPIO_KEY_RESET 12
+#define ICONNECT_GPIO_KEY_OTB 35
+
+#define ICONNECT_SW_RESET 0x00
+#define ICONNECT_SW_OTB 0x01
+
+static struct gpio_keys_button iconnect_buttons[] = {
+ {
+ .type = EV_SW,
+ .code = ICONNECT_SW_RESET,
+ .gpio = ICONNECT_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ .debounce_interval = 100,
+ },
+ {
+ .type = EV_SW,
+ .code = ICONNECT_SW_OTB,
+ .gpio = ICONNECT_GPIO_KEY_OTB,
+ .desc = "OTB Button",
+ .active_low = 1,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+ .buttons = iconnect_buttons,
+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &iconnect_button_data,
+ },
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+ MPP12_GPIO, /*Input for reset button*/
+ MPP35_GPIO, /*Input for OTB button*/
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ 0
+};
+
+static void __init iconnect_init(void)
+{
+ u32 dev, rev;
+
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(iconnect_mpp_config);
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&iconnect_ge00_data);
+ kirkwood_pcie_id(&dev, &rev);
+
+ kirkwood_uart0_init();
+ kirkwood_i2c_init();
+
+ platform_device_register(&iconnect_leds);
+ platform_device_register(&iconnect_button_device);
+}
+
+static int __init iconnect_pci_init(void)
+{
+ if (machine_is_iconnect())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
+ .atag_offset = 0x100,
+ .init_machine = iconnect_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
new file mode 100644
index 0000000..a9040a6
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nas6210-setup.c
@@ -0,0 +1,189 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF 24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = SZ_512K
+ }, {
+ .name = "uboot_env",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_1M
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+ {
+ .name = "status:green:power",
+ .default_trigger = "default-on",
+ .gpio = 25,
+ .active_low = 0,
+ },
+ {
+ .name = "status:red:power",
+ .default_trigger = "none",
+ .gpio = 22,
+ .active_low = 0,
+ },
+ {
+ .name = "status:red:usb_copy",
+ .default_trigger = "none",
+ .gpio = 27,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+ .leds = nas6210_led_pins,
+ .num_leds = ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &nas6210_led_data,
+ }
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 29,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 28,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+ .buttons = nas6210_buttons,
+ .nbuttons = ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &nas6210_button_data,
+ }
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP22_GPIO, /* Power LED red */
+ MPP24_GPIO, /* Power off device */
+ MPP25_GPIO, /* Power LED green */
+ MPP27_GPIO, /* USB transfer LED */
+ MPP28_GPIO, /* Reset button */
+ MPP29_GPIO, /* USB Copy button */
+ 0
+};
+
+static void nas6210_power_off(void)
+{
+ gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+}
+
+static void __init nas6210_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(nas6210_mpp_config);
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&nas6210_ge00_data);
+ kirkwood_sata_init(&nas6210_sata_data);
+ kirkwood_uart0_init();
+ platform_device_register(&nas6210_leds);
+ platform_device_register(&nas6210_button_device);
+ if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+ gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+ pm_power_off = nas6210_power_off;
+ else
+ pr_err("nas6210: failed to configure power-off GPIO\n");
+}
+
+static int __init nas6210_pci_init(void)
+{
+ if (machine_is_nas6210()) {
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (dev == MV88F6282_DEV_ID)
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+ else
+ kirkwood_pcie_init(KW_PCIE0);
+ }
+
+ return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
+ /* Maintainer: <gmbnomis at gmail dot com> */
+ .atag_offset = 0x100,
+ .init_machine = nas6210_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
new file mode 100644
index 0000000..15dc526
--- /dev/null
+++ b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/nsa-310-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-kirkwood/nsa-310-setup.c
+ *
+ * ZyXEL NSA-310 Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NSA310_GPIO_LED_ESATA_GREEN 12
+#define NSA310_GPIO_LED_ESATA_RED 13
+#define NSA310_GPIO_LED_USB_GREEN 15
+#define NSA310_GPIO_LED_USB_RED 16
+#define NSA310_GPIO_USB_POWER_OFF 21
+#define NSA310_GPIO_LED_SYS_GREEN 28
+#define NSA310_GPIO_LED_SYS_RED 29
+#define NSA310_GPIO_KEY_RESTART 36
+#define NSA310_GPIO_KEY_COPY 37
+#define NSA310_GPIO_LED_COPY_GREEN 39
+#define NSA310_GPIO_LED_COPY_RED 40
+#define NSA310_GPIO_LED_HDD_GREEN 41
+#define NSA310_GPIO_LED_HDD_RED 42
+#define NSA310_GPIO_BUZZER 44
+#define NSA310_GPIO_KEY_POWER 46
+#define NSA310_GPIO_POWER_OFF 48
+
+
+static unsigned int nsa310_mpp_config[] __initdata = {
+ MPP12_GPIO,
+ MPP13_GPIO,
+ MPP15_GPIO,
+ MPP16_GPIO,
+ MPP21_GPIO,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP39_GPIO,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP44_GPIO,
+ MPP46_GPIO,
+ MPP48_GPIO,
+ 0
+};
+
+static struct mtd_partition nsa310_mtd_parts[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "uboot_env",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000,
+ }, {
+ .name = "key_store",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000,
+ }, {
+ .name = "info",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x80000,
+ }, {
+ .name = "etc",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xa00000,
+ }, {
+ .name = "kernel_1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xa00000,
+ }, {
+ .name = "rootfs1",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x2fc0000,
+ }, {
+ .name = "kernel_2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0xa00000,
+ }, {
+ .name = "rootfs2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x2fc0000,
+ },
+};
+
+static struct gpio_led nsa310_leds[] = {
+ {
+ .name = "nsa310:green:sys",
+ .gpio = NSA310_GPIO_LED_SYS_GREEN,
+ }, {
+ .name = "nsa310:red:sys",
+ .gpio = NSA310_GPIO_LED_SYS_RED,
+ }, {
+ .name = "nsa310:green:hdd",
+ .gpio = NSA310_GPIO_LED_HDD_GREEN,
+ }, {
+ .name = "nsa310:red:hdd",
+ .gpio = NSA310_GPIO_LED_HDD_RED,
+ }, {
+ .name = "nsa310:green:esata",
+ .gpio = NSA310_GPIO_LED_ESATA_GREEN,
+ }, {
+ .name = "nsa310:red:esata",
+ .gpio = NSA310_GPIO_LED_ESATA_RED,
+ }, {
+ .name = "nsa310:green:usb",
+ .gpio = NSA310_GPIO_LED_USB_GREEN,
+ }, {
+ .name = "nsa310:red:usb",
+ .gpio = NSA310_GPIO_LED_USB_RED,
+ }, {
+ .name = "nsa310:green:copy",
+ .gpio = NSA310_GPIO_LED_COPY_GREEN,
+ }, {
+ .name = "nsa310:red:copy",
+ .gpio = NSA310_GPIO_LED_COPY_RED,
+ },
+};
+
+static struct gpio_led_platform_data nsa310_leds_data = {
+ .leds = nsa310_leds,
+ .num_leds = ARRAY_SIZE(nsa310_leds),
+};
+
+static struct platform_device nsa310_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &nsa310_leds_data,
+ }
+};
+
+static struct gpio_keys_button nsa310_buttons[] = {
+ {
+ .desc = "Power Button",
+ .code = KEY_POWER,
+ .type = EV_KEY,
+ .gpio = NSA310_GPIO_KEY_POWER,
+ .debounce_interval = 1000,
+ }, {
+ .desc = "Copy Button",
+ .code = KEY_COPY,
+ .type = EV_KEY,
+ .gpio = NSA310_GPIO_KEY_COPY,
+ .active_low = 1,
+ .debounce_interval = 1000,
+ }, {
+ .desc = "Reset Button",
+ .code = KEY_RESTART,
+ .type = EV_KEY,
+ .gpio = NSA310_GPIO_KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = 1000,
+ },
+};
+
+static struct gpio_keys_platform_data nsa310_keys_data = {
+ .buttons = nsa310_buttons,
+ .nbuttons = ARRAY_SIZE(nsa310_buttons),
+};
+
+static struct platform_device nsa310_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &nsa310_keys_data,
+ }
+};
+
+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
+ { I2C_BOARD_INFO("adt7476", 0x2e) },
+};
+
+static struct mv_sata_platform_data nsa310_sata_data = {
+ .n_ports = 2,
+};
+
+static void nsa310_power_off(void)
+{
+ gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
+}
+
+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
+ const char *label)
+{
+ int err;
+
+ err = gpio_request_one(gpio, flags, label);
+ if (err)
+ pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
+ gpio, label, err);
+
+ return err;
+}
+
+static void __init nsa310_gpio_init(void)
+{
+ int err;
+
+ err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
+ "Power Off");
+ if (!err)
+ pm_power_off = nsa310_power_off;
+
+ nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
+ "USB Power Off");
+}
+
+static void __init nsa310_init(void)
+{
+ u32 dev, rev;
+
+ kirkwood_init();
+ kirkwood_mpp_conf(nsa310_mpp_config);
+
+ nsa310_gpio_init();
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
+ kirkwood_ehci_init();
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ kirkwood_sata_init(&nsa310_sata_data);
+ kirkwood_uart0_init();
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
+ kirkwood_i2c_init();
+
+ platform_device_register(&nsa310_leds_device);
+ platform_device_register(&nsa310_keys_device);
+}
+
+static int __init nsa310_pci_init(void)
+{
+ if (machine_is_nsa310())
+ kirkwood_pcie_init(KW_PCIE0);
+
+ return 0;
+}
+subsys_initcall(nsa310_pci_init);
+
+MACHINE_START(NSA310, "ZyXEL NSA-310")
+ .atag_offset = 0x100,
+ .init_machine = nsa310_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
+MACHINE_END
diff --git a/target/linux/kirkwood/patches-3.3/200-iconnect.patch b/target/linux/kirkwood/patches-3.3/200-iconnect.patch
deleted file mode 100644
index 5a46ee7..0000000
--- a/target/linux/kirkwood/patches-3.3/200-iconnect.patch
+++ /dev/null
@@ -1,218 +0,0 @@
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
- obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
-+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
- obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -130,6 +130,12 @@ config MACH_T5325
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-+config MACH_ICONNECT
-+ bool "Iomega iConnect Wireless"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Iomega iConnect Wireless.
-+
- endmenu
-
- endif
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
-@@ -0,0 +1,190 @@
-+/*
-+ * arch/arm/mach-kirkwood/iconnect-setup.c
-+ *
-+ * Iomega iConnect Wireless
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ethtool.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct mtd_partition iconnect_nand_parts[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0,
-+ .size = SZ_1M
-+ }, {
-+ .name = "uImage",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = SZ_1M + SZ_2M
-+ }, {
-+ .name = "rootfs",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = SZ_32M,
-+ }, {
-+ .name = "data",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL
-+ },
-+};
-+
-+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-+};
-+
-+static struct gpio_led iconnect_led_pins[] = {
-+ {
-+ .name = "iconnect:blue:power",
-+ .default_trigger = "default-on",
-+ .gpio = 42,
-+ },
-+ {
-+ .name = "iconnect:red:power",
-+ .gpio = 43,
-+ },
-+ {
-+ .name = "iconnect:blue:usb1",
-+ .gpio = 44,
-+ },
-+ {
-+ .name = "iconnect:blue:usb2",
-+ .gpio = 45,
-+ },
-+ {
-+ .name = "iconnect:blue:usb3",
-+ .gpio = 46,
-+ },
-+ {
-+ .name = "iconnect:blue:usb4",
-+ .gpio = 47,
-+ },
-+ {
-+ .name = "iconnect:blue:otb",
-+ .gpio = 48,
-+ },
-+};
-+
-+static struct gpio_led_platform_data iconnect_led_data = {
-+ .leds = iconnect_led_pins,
-+ .num_leds = ARRAY_SIZE(iconnect_led_pins),
-+};
-+
-+static struct platform_device iconnect_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &iconnect_led_data,
-+ }
-+};
-+
-+#define ICONNECT_GPIO_KEY_RESET 12
-+#define ICONNECT_GPIO_KEY_OTB 35
-+
-+#define ICONNECT_SW_RESET 0x00
-+#define ICONNECT_SW_OTB 0x01
-+
-+static struct gpio_keys_button iconnect_buttons[] = {
-+ {
-+ .type = EV_SW,
-+ .code = ICONNECT_SW_RESET,
-+ .gpio = ICONNECT_GPIO_KEY_RESET,
-+ .desc = "Reset Button",
-+ .active_low = 1,
-+ .debounce_interval = 100,
-+ },
-+ {
-+ .type = EV_SW,
-+ .code = ICONNECT_SW_OTB,
-+ .gpio = ICONNECT_GPIO_KEY_OTB,
-+ .desc = "OTB Button",
-+ .active_low = 1,
-+ .debounce_interval = 100,
-+ },
-+};
-+
-+static struct gpio_keys_platform_data iconnect_button_data = {
-+ .buttons = iconnect_buttons,
-+ .nbuttons = ARRAY_SIZE(iconnect_buttons),
-+};
-+
-+static struct platform_device iconnect_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &iconnect_button_data,
-+ },
-+};
-+
-+static unsigned int iconnect_mpp_config[] __initdata = {
-+ MPP12_GPIO, /*Input for reset button*/
-+ MPP35_GPIO, /*Input for OTB button*/
-+ MPP42_GPIO,
-+ MPP43_GPIO,
-+ MPP44_GPIO,
-+ MPP45_GPIO,
-+ MPP46_GPIO,
-+ MPP47_GPIO,
-+ MPP48_GPIO,
-+ 0
-+};
-+
-+static void __init iconnect_init(void)
-+{
-+ u32 dev, rev;
-+
-+ /*
-+ * Basic setup. Needs to be called early.
-+ */
-+ kirkwood_init();
-+ kirkwood_mpp_conf(iconnect_mpp_config);
-+
-+ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-+ kirkwood_ehci_init();
-+
-+ kirkwood_ge00_init(&iconnect_ge00_data);
-+ kirkwood_pcie_id(&dev, &rev);
-+
-+ kirkwood_uart0_init();
-+ kirkwood_i2c_init();
-+
-+ platform_device_register(&iconnect_leds);
-+ platform_device_register(&iconnect_button_device);
-+}
-+
-+static int __init iconnect_pci_init(void)
-+{
-+ if (machine_is_iconnect())
-+ kirkwood_pcie_init(KW_PCIE0);
-+
-+ return 0;
-+}
-+subsys_initcall(iconnect_pci_init);
-+
-+
-+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-+ .atag_offset = 0x100,
-+ .init_machine = iconnect_init,
-+ .map_io = kirkwood_map_io,
-+ .init_early = kirkwood_init_early,
-+ .init_irq = kirkwood_init_irq,
-+ .timer = &kirkwood_timer,
-+ .restart = kirkwood_restart,
-+MACHINE_END
diff --git a/target/linux/kirkwood/patches-3.3/201-raidsonic-IB-NAS62x0-support.patch b/target/linux/kirkwood/patches-3.3/201-raidsonic-IB-NAS62x0-support.patch
deleted file mode 100644
index b7fcb04..0000000
--- a/target/linux/kirkwood/patches-3.3/201-raidsonic-IB-NAS62x0-support.patch
+++ /dev/null
@@ -1,216 +0,0 @@
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/nas6210-setup.c
-@@ -0,0 +1,189 @@
-+/*
-+ * arch/arm/mach-kirkwood/nas6210-setup.c
-+ *
-+ * Raidsonic ICYBOX NAS6210 Board Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define NAS6210_GPIO_POWER_OFF 24
-+
-+static struct mtd_partition nas6210_nand_parts[] = {
-+ {
-+ .name = "uboot",
-+ .offset = 0,
-+ .size = SZ_512K
-+ }, {
-+ .name = "uboot_env",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = SZ_128K
-+ }, {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 3 * SZ_1M
-+ }, {
-+ .name = "rootfs",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL
-+ },
-+};
-+
-+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
-+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-+};
-+
-+static struct mv_sata_platform_data nas6210_sata_data = {
-+ .n_ports = 2,
-+};
-+
-+static struct gpio_led nas6210_led_pins[] = {
-+ {
-+ .name = "status:green:power",
-+ .default_trigger = "default-on",
-+ .gpio = 25,
-+ .active_low = 0,
-+ },
-+ {
-+ .name = "status:red:power",
-+ .default_trigger = "none",
-+ .gpio = 22,
-+ .active_low = 0,
-+ },
-+ {
-+ .name = "status:red:usb_copy",
-+ .default_trigger = "none",
-+ .gpio = 27,
-+ .active_low = 0,
-+ },
-+};
-+
-+static struct gpio_led_platform_data nas6210_led_data = {
-+ .leds = nas6210_led_pins,
-+ .num_leds = ARRAY_SIZE(nas6210_led_pins),
-+};
-+
-+static struct platform_device nas6210_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nas6210_led_data,
-+ }
-+};
-+
-+static struct gpio_keys_button nas6210_buttons[] = {
-+ {
-+ .code = KEY_COPY,
-+ .gpio = 29,
-+ .desc = "USB Copy",
-+ .active_low = 1,
-+ },
-+ {
-+ .code = KEY_RESTART,
-+ .gpio = 28,
-+ .desc = "Reset",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_keys_platform_data nas6210_button_data = {
-+ .buttons = nas6210_buttons,
-+ .nbuttons = ARRAY_SIZE(nas6210_buttons),
-+};
-+
-+static struct platform_device nas6210_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &nas6210_button_data,
-+ }
-+};
-+
-+static unsigned int nas6210_mpp_config[] __initdata = {
-+ MPP0_NF_IO2,
-+ MPP1_NF_IO3,
-+ MPP2_NF_IO4,
-+ MPP3_NF_IO5,
-+ MPP4_NF_IO6,
-+ MPP5_NF_IO7,
-+ MPP18_NF_IO0,
-+ MPP19_NF_IO1,
-+ MPP22_GPIO, /* Power LED red */
-+ MPP24_GPIO, /* Power off device */
-+ MPP25_GPIO, /* Power LED green */
-+ MPP27_GPIO, /* USB transfer LED */
-+ MPP28_GPIO, /* Reset button */
-+ MPP29_GPIO, /* USB Copy button */
-+ 0
-+};
-+
-+static void nas6210_power_off(void)
-+{
-+ gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
-+}
-+
-+static void __init nas6210_init(void)
-+{
-+ /*
-+ * Basic setup. Needs to be called early.
-+ */
-+ kirkwood_init();
-+ kirkwood_mpp_conf(nas6210_mpp_config);
-+
-+ kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
-+ kirkwood_ehci_init();
-+ kirkwood_ge00_init(&nas6210_ge00_data);
-+ kirkwood_sata_init(&nas6210_sata_data);
-+ kirkwood_uart0_init();
-+ platform_device_register(&nas6210_leds);
-+ platform_device_register(&nas6210_button_device);
-+ if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
-+ gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
-+ pm_power_off = nas6210_power_off;
-+ else
-+ pr_err("nas6210: failed to configure power-off GPIO\n");
-+}
-+
-+static int __init nas6210_pci_init(void)
-+{
-+ if (machine_is_nas6210()) {
-+ u32 dev, rev;
-+
-+ kirkwood_pcie_id(&dev, &rev);
-+ if (dev == MV88F6282_DEV_ID)
-+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-+ else
-+ kirkwood_pcie_init(KW_PCIE0);
-+ }
-+
-+ return 0;
-+}
-+subsys_initcall(nas6210_pci_init);
-+
-+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
-+ /* Maintainer: <gmbnomis at gmail dot com> */
-+ .atag_offset = 0x100,
-+ .init_machine = nas6210_init,
-+ .map_io = kirkwood_map_io,
-+ .init_early = kirkwood_init_early,
-+ .init_irq = kirkwood_init_irq,
-+ .timer = &kirkwood_timer,
-+MACHINE_END
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -136,6 +136,12 @@ config MACH_ICONNECT
- Say 'Y' here if you want your kernel to support the
- Iomega iConnect Wireless.
-
-+config MACH_NAS6210
-+ bool "RaidSonic ICY BOX IB-NAS6210"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ RaidSonic ICY BOX IB-NAS6210 device.
-+
- endmenu
-
- endif
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
- obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-+obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
-
- obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/target/linux/kirkwood/patches-3.3/202-zyxel-nsa-310.patch b/target/linux/kirkwood/patches-3.3/202-zyxel-nsa-310.patch
deleted file mode 100644
index cb84297..0000000
--- a/target/linux/kirkwood/patches-3.3/202-zyxel-nsa-310.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -142,6 +142,12 @@ config MACH_NAS6210
- Say 'Y' here if you want your kernel to support the
- RaidSonic ICY BOX IB-NAS6210 device.
-
-+config MACH_NSA310
-+ bool "ZyXEL NSA-310"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ ZyXEL NSA-310 board.
-+
- endmenu
-
- endif
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -20,5 +20,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbi
- obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325) += t5325-setup.o
- obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
-+obj-$(CONFIG_MACH_NSA310) += nsa-310-setup.o
-
- obj-$(CONFIG_CPU_IDLE) += cpuidle.o
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/nsa-310-setup.c
-@@ -0,0 +1,273 @@
-+/*
-+ * arch/arm/mach-kirkwood/nsa-310-setup.c
-+ *
-+ * ZyXEL NSA-310 Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <linux/delay.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+#define NSA310_GPIO_LED_ESATA_GREEN 12
-+#define NSA310_GPIO_LED_ESATA_RED 13
-+#define NSA310_GPIO_LED_USB_GREEN 15
-+#define NSA310_GPIO_LED_USB_RED 16
-+#define NSA310_GPIO_USB_POWER_OFF 21
-+#define NSA310_GPIO_LED_SYS_GREEN 28
-+#define NSA310_GPIO_LED_SYS_RED 29
-+#define NSA310_GPIO_KEY_RESTART 36
-+#define NSA310_GPIO_KEY_COPY 37
-+#define NSA310_GPIO_LED_COPY_GREEN 39
-+#define NSA310_GPIO_LED_COPY_RED 40
-+#define NSA310_GPIO_LED_HDD_GREEN 41
-+#define NSA310_GPIO_LED_HDD_RED 42
-+#define NSA310_GPIO_BUZZER 44
-+#define NSA310_GPIO_KEY_POWER 46
-+#define NSA310_GPIO_POWER_OFF 48
-+
-+
-+static unsigned int nsa310_mpp_config[] __initdata = {
-+ MPP12_GPIO,
-+ MPP13_GPIO,
-+ MPP15_GPIO,
-+ MPP16_GPIO,
-+ MPP21_GPIO,
-+ MPP28_GPIO,
-+ MPP29_GPIO,
-+ MPP36_GPIO,
-+ MPP37_GPIO,
-+ MPP39_GPIO,
-+ MPP40_GPIO,
-+ MPP41_GPIO,
-+ MPP42_GPIO,
-+ MPP44_GPIO,
-+ MPP46_GPIO,
-+ MPP48_GPIO,
-+ 0
-+};
-+
-+static struct mtd_partition nsa310_mtd_parts[] = {
-+ {
-+ .name = "uboot",
-+ .offset = 0,
-+ .size = 0x100000,
-+ .mask_flags = MTD_WRITEABLE,
-+ }, {
-+ .name = "uboot_env",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0x80000,
-+ }, {
-+ .name = "key_store",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0x80000,
-+ }, {
-+ .name = "info",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0x80000,
-+ }, {
-+ .name = "etc",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0xa00000,
-+ }, {
-+ .name = "kernel_1",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0xa00000,
-+ }, {
-+ .name = "rootfs1",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0x2fc0000,
-+ }, {
-+ .name = "kernel_2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0xa00000,
-+ }, {
-+ .name = "rootfs2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 0x2fc0000,
-+ },
-+};
-+
-+static struct gpio_led nsa310_leds[] = {
-+ {
-+ .name = "nsa310:green:sys",
-+ .gpio = NSA310_GPIO_LED_SYS_GREEN,
-+ }, {
-+ .name = "nsa310:red:sys",
-+ .gpio = NSA310_GPIO_LED_SYS_RED,
-+ }, {
-+ .name = "nsa310:green:hdd",
-+ .gpio = NSA310_GPIO_LED_HDD_GREEN,
-+ }, {
-+ .name = "nsa310:red:hdd",
-+ .gpio = NSA310_GPIO_LED_HDD_RED,
-+ }, {
-+ .name = "nsa310:green:esata",
-+ .gpio = NSA310_GPIO_LED_ESATA_GREEN,
-+ }, {
-+ .name = "nsa310:red:esata",
-+ .gpio = NSA310_GPIO_LED_ESATA_RED,
-+ }, {
-+ .name = "nsa310:green:usb",
-+ .gpio = NSA310_GPIO_LED_USB_GREEN,
-+ }, {
-+ .name = "nsa310:red:usb",
-+ .gpio = NSA310_GPIO_LED_USB_RED,
-+ }, {
-+ .name = "nsa310:green:copy",
-+ .gpio = NSA310_GPIO_LED_COPY_GREEN,
-+ }, {
-+ .name = "nsa310:red:copy",
-+ .gpio = NSA310_GPIO_LED_COPY_RED,
-+ },
-+};
-+
-+static struct gpio_led_platform_data nsa310_leds_data = {
-+ .leds = nsa310_leds,
-+ .num_leds = ARRAY_SIZE(nsa310_leds),
-+};
-+
-+static struct platform_device nsa310_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nsa310_leds_data,
-+ }
-+};
-+
-+static struct gpio_keys_button nsa310_buttons[] = {
-+ {
-+ .desc = "Power Button",
-+ .code = KEY_POWER,
-+ .type = EV_KEY,
-+ .gpio = NSA310_GPIO_KEY_POWER,
-+ .debounce_interval = 1000,
-+ }, {
-+ .desc = "Copy Button",
-+ .code = KEY_COPY,
-+ .type = EV_KEY,
-+ .gpio = NSA310_GPIO_KEY_COPY,
-+ .active_low = 1,
-+ .debounce_interval = 1000,
-+ }, {
-+ .desc = "Reset Button",
-+ .code = KEY_RESTART,
-+ .type = EV_KEY,
-+ .gpio = NSA310_GPIO_KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = 1000,
-+ },
-+};
-+
-+static struct gpio_keys_platform_data nsa310_keys_data = {
-+ .buttons = nsa310_buttons,
-+ .nbuttons = ARRAY_SIZE(nsa310_buttons),
-+};
-+
-+static struct platform_device nsa310_keys_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nsa310_keys_data,
-+ }
-+};
-+
-+static struct i2c_board_info __initdata nsa310_i2c_info[] = {
-+ { I2C_BOARD_INFO("adt7476", 0x2e) },
-+};
-+
-+static struct mv_sata_platform_data nsa310_sata_data = {
-+ .n_ports = 2,
-+};
-+
-+static void nsa310_power_off(void)
-+{
-+ gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-+}
-+
-+static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-+ const char *label)
-+{
-+ int err;
-+
-+ err = gpio_request_one(gpio, flags, label);
-+ if (err)
-+ pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-+ gpio, label, err);
-+
-+ return err;
-+}
-+
-+static void __init nsa310_gpio_init(void)
-+{
-+ int err;
-+
-+ err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-+ "Power Off");
-+ if (!err)
-+ pm_power_off = nsa310_power_off;
-+
-+ nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
-+ "USB Power Off");
-+}
-+
-+static void __init nsa310_init(void)
-+{
-+ u32 dev, rev;
-+
-+ kirkwood_init();
-+ kirkwood_mpp_conf(nsa310_mpp_config);
-+
-+ nsa310_gpio_init();
-+
-+ kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
-+ kirkwood_ehci_init();
-+
-+ kirkwood_pcie_id(&dev, &rev);
-+
-+ kirkwood_sata_init(&nsa310_sata_data);
-+ kirkwood_uart0_init();
-+
-+ i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
-+ kirkwood_i2c_init();
-+
-+ platform_device_register(&nsa310_leds_device);
-+ platform_device_register(&nsa310_keys_device);
-+}
-+
-+static int __init nsa310_pci_init(void)
-+{
-+ if (machine_is_nsa310())
-+ kirkwood_pcie_init(KW_PCIE0);
-+
-+ return 0;
-+}
-+subsys_initcall(nsa310_pci_init);
-+
-+MACHINE_START(NSA310, "ZyXEL NSA-310")
-+ .atag_offset = 0x100,
-+ .init_machine = nsa310_init,
-+ .map_io = kirkwood_map_io,
-+ .init_early = kirkwood_init_early,
-+ .init_irq = kirkwood_init_irq,
-+ .timer = &kirkwood_timer,
-+ .restart = kirkwood_restart,
-+MACHINE_END
diff --git a/target/linux/kirkwood/patches/000-boards.patch b/target/linux/kirkwood/patches/000-boards.patch
new file mode 100644
index 0000000..4fe376e
--- /dev/null
+++ b/target/linux/kirkwood/patches/000-boards.patch
@@ -0,0 +1,38 @@
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -18,5 +18,8 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
+ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
++obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
++obj-$(CONFIG_MACH_NSA310) += nsa-310-setup.o
+
+ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -130,6 +130,24 @@ config MACH_T5325
+ Say 'Y' here if you want your kernel to support the
+ HP t5325 Thin Client.
+
++config MACH_ICONNECT
++ bool "Iomega iConnect Wireless"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Iomega iConnect Wireless.
++
++config MACH_NAS6210
++ bool "RaidSonic ICY BOX IB-NAS6210"
++ help
++ Say 'Y' here if you want your kernel to support the
++ RaidSonic ICY BOX IB-NAS6210 device.
++
++config MACH_NSA310
++ bool "ZyXEL NSA-310"
++ help
++ Say 'Y' here if you want your kernel to support the
++ ZyXEL NSA-310 board.
++
+ endmenu
+
+ endif
diff --git a/target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch b/target/linux/kirkwood/patches/001-partition_map.patch
index 0f94adc..0f94adc 100644
--- a/target/linux/kirkwood/patches-3.3/001-openwrt_partition_map.patch
+++ b/target/linux/kirkwood/patches/001-partition_map.patch
diff --git a/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch b/target/linux/kirkwood/patches/002-mvsdio_delay.patch
index 46e2a56..46e2a56 100644
--- a/target/linux/kirkwood/patches-3.3/002-mvsdio_delay.patch
+++ b/target/linux/kirkwood/patches/002-mvsdio_delay.patch
diff --git a/target/linux/kirkwood/profiles/100-Sheevaplug.mk b/target/linux/kirkwood/profiles/100-Sheevaplug.mk
deleted file mode 100644
index 65008fe..0000000
--- a/target/linux/kirkwood/profiles/100-Sheevaplug.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Sheevaplug
- NAME:=Globalscale Sheevaplug
- PACKAGES:=
-endef
-
-define Profile/Sheevaplug/Description
- Globalscale Sheevaplug Profile
-endef
-
-$(eval $(call Profile,Sheevaplug))
diff --git a/target/linux/kirkwood/profiles/200-Dockstar.mk b/target/linux/kirkwood/profiles/200-Dockstar.mk
deleted file mode 100644
index 5b5d9cb..0000000
--- a/target/linux/kirkwood/profiles/200-Dockstar.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Dockstar
- NAME:=Seagate Dockstar
- PACKAGES:=
-endef
-
-define Profile/Dockstar/Description
- Seagate Dockstar Profile
-endef
-
-$(eval $(call Profile,Dockstar))
diff --git a/target/linux/kirkwood/profiles/300-Iconnect.mk b/target/linux/kirkwood/profiles/300-Iconnect.mk
deleted file mode 100644
index 230e419..0000000
--- a/target/linux/kirkwood/profiles/300-Iconnect.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Iconnect
- NAME:=Iomega iConnect Wireless
- PACKAGES:=kmod-i2c-mv64xxx kmod-hwmon-core kmod-hwmon-lm63
-endef
-
-define Profile/Iconnect/Description
- Iomega iConnect Wireless
-endef
-
-$(eval $(call Profile,Iconnect))