diff options
| -rw-r--r-- | target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts | 47 |
1 files changed, 33 insertions, 14 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts index a8b1643..f8576f8 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-xp-mamba.dts @@ -6,9 +6,13 @@ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be * used. * - * Copyright (C) 2013 Marvell + * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Based on armada-xp-axpwifiap.dts: + * + * Copyright (C) 2013 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -16,6 +20,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include "armada-xp-mv78230.dtsi" / { @@ -59,9 +65,6 @@ internal-regs { pinctrl { - pinctrl-0 = <&pmx_phy_int>; - pinctrl-names = "default"; - pmx_ge0: pmx-ge0 { marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", "mpp4", "mpp5", "mpp6", "mpp7", @@ -77,7 +80,7 @@ }; pmx_keys: pmx-keys { - marvell,pins = "mpp33"; + marvell,pins = "mpp32", "mpp33"; marvell,function = "gpio"; }; @@ -86,13 +89,13 @@ marvell,function = "spi"; }; - pmx_phy_int: pmx-phy-int { - marvell,pins = "mpp32"; + power_led_pin: power-led-pin { + marvell,pins = "mpp40"; marvell,function = "gpio"; }; - power_led_pin: power-led-pin { - marvell,pins = "mpp40"; + gpio_fan_pin: gpio-fan-pin { + marvell,pins = "mpp24"; marvell,function = "gpio"; }; @@ -114,7 +117,7 @@ }; mdio { - disabled; + status = "disabled"; }; ethernet@70000 { @@ -187,6 +190,7 @@ partition@900000 { label = "devinfo"; reg = <0x900000 0x100000>; /* 1MB */ + read-only; }; partition@a00000 { @@ -240,9 +244,15 @@ pinctrl-names = "default"; button@1 { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 32 GPIO_ACTIVE_HIGH>; + }; + + button@2 { label = "Factory Reset Button"; - linux,code = <141>; /* KEY_SETUP */ - gpios = <&gpio1 1 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; }; }; @@ -253,8 +263,17 @@ power { label = "mamba:white:power"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; + + gpio_fan { + /* SUNON HA4010V4-0000-C99 */ + compatible = "gpio-fan"; + gpios = <&gpio0 24 0>; + + gpio-fan,speed-map = <0 0 + 4500 1>; + }; }; |