summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/lantiq/base-files/etc/uci-defaults/02_network5
-rw-r--r--target/linux/lantiq/dts/ARV7519RW.dtsi186
-rw-r--r--target/linux/lantiq/dts/ARV7519RWV11.dts50
-rw-r--r--target/linux/lantiq/dts/ARV7519RWV12.dts50
-rw-r--r--target/linux/lantiq/image/Makefile6
-rw-r--r--target/linux/lantiq/xrx200/profiles/arv.mk22
6 files changed, 319 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index ad12384..5768336 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -130,6 +130,11 @@ TDW8970)
lan_mac=$(mtd_get_mac_binary boardconfig 61696)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+
+ARV7519*)
+ lan_mac=$(mtd_get_mac_binary boardconfig 22)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
esac
[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
diff --git a/target/linux/lantiq/dts/ARV7519RW.dtsi b/target/linux/lantiq/dts/ARV7519RW.dtsi
new file mode 100644
index 0000000..7790470
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV7519RW.dtsi
@@ -0,0 +1,186 @@
+/include/ "vr9.dtsi"
+
+/ {
+
+ model = "ARV7519 - Astoria Networks ARV7519RW22-A-LT";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ reg = <0x0 0x8000000>;
+ };
+
+ fpi@10000000 {
+
+ gpio: pinmux@E100B10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ gphy-leds {
+ lantiq,groups = "gphy0 led1", "gphy1 led1";
+ lantiq,function = "gphy";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+ };
+
+ eth@E108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = < 0xE108000 0x3000 /* switch */
+ 0xE10B100 0x70 /* mdio */
+ 0xE10B1D8 0x30 /* mii */
+ 0xE10B308 0x30 /* pmac */
+ >;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 72>;
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ wan: interface@1 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ mac-address = [ 00 11 22 33 44 56 ];
+ lantiq,wan;
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ifxhcd@E101000 {
+ status = "okay";
+ gpios = <&gpio 32 0>;
+ lantiq,portmask = <0x3>;
+ };
+
+ pcie@d900000 {
+ status = "disabled";
+ compatible = "lantiq,pcie-xway";
+ };
+
+ pci@E105400 {
+ status = "disabled";
+ compatible = "lantiq,pci-xway";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 22 1>;
+ linux,code = <0x198>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 45 1>;
+ linux,code = <0xf7>;
+ };
+ wps {
+ gpios = <&gpio 20 1>;
+ linux,code = <0x211>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan{ /* green */
+ label = "lan";
+ gpios = <&gpio 02 1>;
+ };
+ voice { /* green */
+ label = "voice";
+ gpios = <&gpio 29 1>;
+ };
+ message1 { /* red */
+ label = "message1";
+ gpios = <&gpio 10 1>;
+ };
+ message2 { /* green */
+ label = "message2";
+ gpios = <&gpio 19 1>;
+ };
+ message3 { /* orange */
+ label = "message3";
+ gpios = <&gpio 28 1>;
+ };
+ alarm { /* blue */
+ label = "alarm";
+ gpios = <&gpio 15 1>;
+ };
+ power { /* red */
+ label = "power";
+ gpios = <&gpio 14 1>;
+ default-state = "on";
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/ARV7519RWV11.dts b/target/linux/lantiq/dts/ARV7519RWV11.dts
new file mode 100644
index 0000000..c77ffb4
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV7519RWV11.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+
+/include/ "ARV7519RW.dtsi"
+
+/ {
+ fpi@10000000 {
+ localbus@0 {
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x000000000000 0x00060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "uboot_cfg";
+ reg = <0x000000060000 0x00020000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "firmware";
+ reg = <0x000000080000 0x01f00000>;
+ };
+
+ partition@1f80000 {
+ label = "boardconfig";
+ reg = <0x000001f80000 0x00080000>;
+ read-only;
+
+ };
+
+
+
+ };
+ };
+ };
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
+ phys = [ 00 01 ];
+ };
+};
diff --git a/target/linux/lantiq/dts/ARV7519RWV12.dts b/target/linux/lantiq/dts/ARV7519RWV12.dts
new file mode 100644
index 0000000..6f1bf51
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV7519RWV12.dts
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+
+/include/ "ARV7519RW.dtsi"
+
+/ {
+ fpi@10000000 {
+ localbus@0 {
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x000000000000 0x00060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "uboot_cfg";
+ reg = <0x000000060000 0x00020000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "firmware";
+ reg = <0x000000080000 0x01f00000>;
+ };
+
+ partition@1f80000 {
+ label = "boardconfig";
+ reg = <0x000001f80000 0x00080000>;
+ read-only;
+
+ };
+
+
+
+ };
+ };
+ };
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
+ phys = [ 00 01 ];
+ };
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index cd36d12..28cb96c 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -307,6 +307,12 @@ Image/Build/Profile/H201L=$(call Image/Build/$(1),$(1),H201L)
Image/BuildKernel/Profile/P2601HNFX=$(call Image/BuildKernel/Template,P2601HNFX)
Image/Build/Profile/P2601HNFX=$(call Image/Build/$(1),$(1),P2601HNFX)
+Image/BuildKernel/Profile/ARV7519RWV11=$(call Image/BuildKernel/Template,ARV7519RWV11,$(1))
+Image/Build/Profile/ARV7519RWV11=$(call Image/Build/$(1), $(1),ARV7519RWV11)
+
+Image/BuildKernel/Profile/ARV7519RWV12=$(call Image/BuildKernel/Template,ARV7519RWV12,$(1))
+Image/Build/Profile/ARV7519RWV12=$(call Image/Build/$(1), $(1),ARV7519RWV12)
+
endif
diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk b/target/linux/lantiq/xrx200/profiles/arv.mk
index 3172971..ce6f761 100644
--- a/target/linux/lantiq/xrx200/profiles/arv.mk
+++ b/target/linux/lantiq/xrx200/profiles/arv.mk
@@ -27,3 +27,25 @@ define Profile/VGV7519BRN
endef
$(eval $(call Profile,VGV7519BRN))
+
+define Profile/ARV7519RWV11
+ NAME:=Livebox Astoria V1
+ PACKAGES:=kmod-ath9k wpad-mini \
+ kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+ kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
+ kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
+ ltq-vdsl-app ppp-mod-pppoa
+endef
+
+$(eval $(call Profile,ARV7519RWV11))
+
+define Profile/ARV7519RWV12
+ NAME:=Livebox Astoria V2
+ PACKAGES:=kmod-ath9k wpad-mini \
+ kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+ kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
+ kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
+ ltq-vdsl-app ppp-mod-pppoa
+endef
+
+$(eval $(call Profile,ARV7519RWV12))