diff options
45 files changed, 326 insertions, 2129 deletions
diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile index 5ff0e69..eefc244 100644 --- a/target/linux/adm5120/Makefile +++ b/target/linux/adm5120/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk BOARD:=adm5120 BOARDNAME:=Infineon/ADMtek ADM5120 -LINUX_VERSION:=2.6.24.7 +LINUX_VERSION:=2.6.25.7 SUBTARGETS:=router_le router_be INITRAMFS_EXTRA_FILES:= diff --git a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c index 7dd6977..8c0a0a3 100644 --- a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c +++ b/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c @@ -68,20 +68,23 @@ static void rb153_pata_exec_command(struct ata_port *ap, rb153_pata_finish_io(ap); } -static void rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr; - + unsigned int t; + + t = buflen; if (write_data) { - for (; buflen > 0; buflen--, buf++) + for (; t > 0; t--, buf++) writeb(*buf, ioaddr); } else { - for (; buflen > 0; buflen--, buf++) + for (; t > 0; t--, buf++) *buf = readb(ioaddr); } rb153_pata_finish_io(adev->link->ap); + return buflen; } static void rb153_pata_freeze(struct ata_port *ap) diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c index 3eec94a..a6eb67c 100644 --- a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c +++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c @@ -390,6 +390,42 @@ static inline void remove_debug_files(struct admhcd *bus) { } #else +static int debug_async_open(struct inode *, struct file *); +static int debug_periodic_open(struct inode *, struct file *); +static int debug_registers_open(struct inode *, struct file *); +static int debug_async_open(struct inode *, struct file *); +static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); +static int debug_close(struct inode *, struct file *); + +static const struct file_operations debug_async_fops = { + .owner = THIS_MODULE, + .open = debug_async_open, + .read = debug_output, + .release = debug_close, +}; +static const struct file_operations debug_periodic_fops = { + .owner = THIS_MODULE, + .open = debug_periodic_open, + .read = debug_output, + .release = debug_close, +}; +static const struct file_operations debug_registers_fops = { + .owner = THIS_MODULE, + .open = debug_registers_open, + .read = debug_output, + .release = debug_close, +}; + +static struct dentry *admhc_debug_root; + +struct debug_buffer { + ssize_t (*fill_func)(struct debug_buffer *); /* fill method */ + struct device *dev; + struct mutex mutex; /* protect filling of buffer */ + size_t count; /* number of characters filled into buffer */ + char *page; +}; + static ssize_t show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed) { @@ -455,8 +491,7 @@ show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed) return count - size; } -static ssize_t -show_async(struct class_device *class_dev, char *buf) +static ssize_t fill_async_buffer(struct debug_buffer *buf) { struct usb_bus *bus; struct usb_hcd *hcd; @@ -464,24 +499,22 @@ show_async(struct class_device *class_dev, char *buf) size_t temp; unsigned long flags; - bus = class_get_devdata(class_dev); + bus = dev_get_drvdata(buf->dev); hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); /* display control and bulk lists together, for simplicity */ spin_lock_irqsave(&ahcd->lock, flags); - temp = show_list(ahcd, buf, PAGE_SIZE, ahcd->ed_head); + temp = show_list(ahcd, buf->page, buf->count, ahcd->ed_head); spin_unlock_irqrestore(&ahcd->lock, flags); return temp; } -static CLASS_DEVICE_ATTR(async, S_IRUGO, show_async, NULL); #define DBG_SCHED_LIMIT 64 -static ssize_t -show_periodic(struct class_device *class_dev, char *buf) +static ssize_t fill_periodic_buffer(struct debug_buffer *buf) { struct usb_bus *bus; struct usb_hcd *hcd; @@ -496,10 +529,10 @@ show_periodic(struct class_device *class_dev, char *buf) return 0; seen_count = 0; - bus = class_get_devdata(class_dev); + bus = dev_get_drvdata(buf->dev); hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); - next = buf; + next = buf->page; size = PAGE_SIZE; temp = scnprintf(next, size, "size = %d\n", NUM_INTS); @@ -574,13 +607,11 @@ show_periodic(struct class_device *class_dev, char *buf) return PAGE_SIZE - size; } -static CLASS_DEVICE_ATTR(periodic, S_IRUGO, show_periodic, NULL); #undef DBG_SCHED_LIMIT -static ssize_t -show_registers(struct class_device *class_dev, char *buf) +static ssize_t fill_registers_buffer(struct debug_buffer *buf) { struct usb_bus *bus; struct usb_hcd *hcd; @@ -591,11 +622,11 @@ show_registers(struct class_device *class_dev, char *buf) char *next; u32 rdata; - bus = class_get_devdata(class_dev); + bus = dev_get_drvdata(buf->dev); hcd = bus_to_hcd(bus); ahcd = hcd_to_admhcd(hcd); regs = ahcd->regs; - next = buf; + next = buf->page; size = PAGE_SIZE; spin_lock_irqsave(&ahcd->lock, flags); @@ -656,27 +687,154 @@ done: spin_unlock_irqrestore(&ahcd->lock, flags); return PAGE_SIZE - size; } -static CLASS_DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); -static inline void create_debug_files (struct admhcd *ahcd) +static struct debug_buffer *alloc_buffer(struct device *dev, + ssize_t (*fill_func)(struct debug_buffer *)) { - struct class_device *cldev = admhcd_to_hcd(ahcd)->self.class_dev; - int retval; + struct debug_buffer *buf; - retval = class_device_create_file(cldev, &class_device_attr_async); - retval = class_device_create_file(cldev, &class_device_attr_periodic); - retval = class_device_create_file(cldev, &class_device_attr_registers); - admhc_dbg(ahcd, "created debug files\n"); + buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL); + + if (buf) { + buf->dev = dev; + buf->fill_func = fill_func; + mutex_init(&buf->mutex); + } + + return buf; +} + +static int fill_buffer(struct debug_buffer *buf) +{ + int ret = 0; + + if (!buf->page) + buf->page = (char *)get_zeroed_page(GFP_KERNEL); + + if (!buf->page) { + ret = -ENOMEM; + goto out; + } + + ret = buf->fill_func(buf); + + if (ret >= 0) { + buf->count = ret; + ret = 0; + } + +out: + return ret; } -static inline void remove_debug_files (struct admhcd *ahcd) +static ssize_t debug_output(struct file *file, char __user *user_buf, + size_t len, loff_t *offset) { - struct class_device *cldev = admhcd_to_hcd(ahcd)->self.class_dev; + struct debug_buffer *buf = file->private_data; + int ret = 0; + + mutex_lock(&buf->mutex); + if (buf->count == 0) { + ret = fill_buffer(buf); + if (ret != 0) { + mutex_unlock(&buf->mutex); + goto out; + } + } + mutex_unlock(&buf->mutex); + + ret = simple_read_from_buffer(user_buf, len, offset, + buf->page, buf->count); - class_device_remove_file(cldev, &class_device_attr_async); - class_device_remove_file(cldev, &class_device_attr_periodic); - class_device_remove_file(cldev, &class_device_attr_registers); +out: + return ret; +} + +static int debug_close(struct inode *inode, struct file *file) +{ + struct debug_buffer *buf = file->private_data; + + if (buf) { + if (buf->page) + free_page((unsigned long)buf->page); + kfree(buf); + } + + return 0; +} + +static int debug_async_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, fill_async_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static int debug_periodic_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, + fill_periodic_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static int debug_registers_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, + fill_registers_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static inline void create_debug_files(struct admhcd *ahcd) +{ + struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self; + struct device *dev = bus->dev; + + ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root); + if (!ahcd->debug_dir) + goto dir_error; + + ahcd->debug_async = debugfs_create_file("async", S_IRUGO, + ahcd->debug_dir, dev, + &debug_async_fops); + if (!ahcd->debug_async) + goto async_error; + + ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO, + ahcd->debug_dir, dev, + &debug_periodic_fops); + if (!ahcd->debug_periodic) + goto periodic_error; + + ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO, + ahcd->debug_dir, dev, + &debug_registers_fops); + if (!ahcd->debug_registers) + goto registers_error; + + admhc_dbg(ahcd, "created debug files\n"); + return; + +registers_error: + debugfs_remove(ahcd->debug_periodic); +periodic_error: + debugfs_remove(ahcd->debug_async); +async_error: + debugfs_remove(ahcd->debug_dir); +dir_error: + ahcd->debug_periodic = NULL; + ahcd->debug_async = NULL; + ahcd->debug_dir = NULL; +} + +static inline void remove_debug_files(struct admhcd *ahcd) +{ + debugfs_remove(ahcd->debug_registers); + debugfs_remove(ahcd->debug_periodic); + debugfs_remove(ahcd->debug_async); + debugfs_remove(ahcd->debug_dir); } #endif diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c index 78b1aef..72a2525 100644 --- a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c +++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c @@ -35,6 +35,7 @@ #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/reboot.h> +#include <linux/debugfs.h> #include <asm/io.h> #include <asm/irq.h> @@ -45,7 +46,7 @@ #include "../core/hcd.h" #include "../core/hub.h" -#define DRIVER_VERSION "0.24.0" +#define DRIVER_VERSION "0.25.0" #define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>" #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" @@ -799,6 +800,14 @@ static int __init admhc_hcd_mod_init(void) pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, sizeof (struct ed), sizeof (struct td)); +#ifdef DEBUG + admhc_debug_root = debugfs_create_dir("admhc", NULL); + if (!admhc_debug_root) { + ret = -ENOENT; + goto error_debug; + } +#endif + #ifdef PLATFORM_DRIVER ret = platform_driver_register(&PLATFORM_DRIVER); if (ret < 0) @@ -811,6 +820,12 @@ static int __init admhc_hcd_mod_init(void) platform_driver_unregister(&PLATFORM_DRIVER); error_platform: #endif + +#ifdef DEBUG + debugfs_remove(admhc_debug_root); + admhc_debug_root = NULL; +error_debug: +#endif return ret; } module_init(admhc_hcd_mod_init); @@ -818,6 +833,9 @@ module_init(admhc_hcd_mod_init); static void __exit admhc_hcd_mod_exit(void) { platform_driver_unregister(&PLATFORM_DRIVER); +#ifdef DEBUG + debugfs_remove(admhc_debug_root); +#endif } module_exit(admhc_hcd_mod_exit); diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120.h b/target/linux/adm5120/files/drivers/usb/host/adm5120.h index a3acfe5..fbb9b3a 100644 --- a/target/linux/adm5120/files/drivers/usb/host/adm5120.h +++ b/target/linux/adm5120/files/drivers/usb/host/adm5120.h @@ -431,6 +431,13 @@ struct admhcd { #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ // there are also chip quirks/bugs in init logic + +#ifdef DEBUG + struct dentry *debug_dir; + struct dentry *debug_async; + struct dentry *debug_periodic; + struct dentry *debug_registers; +#endif }; /* convert between an hcd pointer and the corresponding ahcd_hcd */ diff --git a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch b/target/linux/adm5120/patches-2.6.25/001-adm5120.patch deleted file mode 100644 index 84d0a8d..0000000 --- a/target/linux/adm5120/patches-2.6.25/001-adm5120.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -18,6 +18,20 @@ - prompt "System type" - default SGI_IP22 - -+config MIPS_ADM5120 -+ bool "ADM5120 SoC based machines" -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select GENERIC_GPIO -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -@@ -683,6 +697,7 @@ - - endchoice - -+source "arch/mips/adm5120/Kconfig" - source "arch/mips/au1000/Kconfig" - source "arch/mips/basler/excite/Kconfig" - source "arch/mips/jazz/Kconfig" ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -174,6 +174,16 @@ - load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - - # -+# ADMtek 5120 -+# -+ -+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/ -+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 -+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 -+ -+# - # Common Alchemy Au1x00 stuff - # - core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -94,6 +94,58 @@ - #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ - #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -+/* -+ * Valid machtype for group ADMtek ADM5120 -+ */ -+#define MACH_ADM5120_GENERIC 0 /* Generic board */ -+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ -+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ -+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ -+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ -+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ -+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ -+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ -+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ -+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ -+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ -+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ -+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ -+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ -+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ -+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ -+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ -+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ -+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ -+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ -+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ -+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ -+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ -+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ -+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ -+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ -+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ -+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ -+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ -+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ -+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ -+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */ -+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */ -+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */ -+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */ -+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */ -+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */ -+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */ -+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */ -+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */ -+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */ -+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */ -+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */ -+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */ -+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */ -+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K/BR-6104KP */ -+#define MACH_ADM5120_RB_192 47 /* Mikrotik RouterBOARD 192 */ -+#define MACH_ADM5120_BR61x4WG 48 /* Edimax BR-6104Wg/BR-6114WG */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; diff --git a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch deleted file mode 100644 index 1439523..0000000 --- a/target/linux/adm5120/patches-2.6.25/002-adm5120_flash.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -590,5 +590,9 @@ - - This selection automatically selects the map_ram driver. - -+config MTD_ADM5120 -+ tristate "Map driver for ADM5120 based boards" -+ depends on MIPS_ADM5120 -+ - endmenu - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -44,6 +44,7 @@ - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch deleted file mode 100644 index 2071811..0000000 --- a/target/linux/adm5120/patches-2.6.25/003-adm5120_switch.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -606,6 +606,10 @@ - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config MIPS_ADM5120_ENET -+ tristate "MIPS ADM5120 Ethernet switch support" -+ depends on MIPS_ADM5120 -+ - config SGI_IOC3_ETH - bool "SGI IOC3 Ethernet" - depends on PCI && SGI_IP27 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -187,6 +187,7 @@ - # This is also a 82596 and should probably be merged - obj-$(CONFIG_LP486E) += lp486e.o - -+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o - obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o - obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch deleted file mode 100644 index 4ab31dd..0000000 --- a/target/linux/adm5120/patches-2.6.25/005-adm5120_usb.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -260,3 +260,6 @@ - To compile this driver as a module, choose M here: the - module will be called r8a66597-hcd. - -+config USB_ADM5120_HCD -+ tristate "ADM5120 HCD support (EXPERIMENTAL)" -+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -8,6 +8,7 @@ - - obj-$(CONFIG_PCI) += pci-quirks.o - -+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o - obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o - obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -16,6 +16,7 @@ - obj-$(CONFIG_USB_SL811_HCD) += host/ - obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_USB_R8A66597_HCD) += host/ -+obj-$(CONFIG_USB_ADM5120_HCD) += host/ - - obj-$(CONFIG_USB_ACM) += class/ - obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch deleted file mode 100644 index ac108e5..0000000 --- a/target/linux/adm5120/patches-2.6.25/006-adm5120_leds.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -25,6 +25,21 @@ - This option enables support for LEDs driven using outputs - of the dedicated PWM controller found on newer Atmel SOCs. - -+config LEDS_ADM5120 -+ tristate "LED Support for ADM5120 GPIO LEDs" -+ depends on LEDS_GPIO && MIPS_ADM5120 -+ help -+ This option enables support for LEDs connected to GPIO lines -+ on ADM5120 SoC based platforms. -+ -+config LEDS_ADM5120_EXPERIMENTAL -+ bool "Enable ADM5120 LEDs experimental code" -+ depends on LEDS_ADM5120 -+ -+config LEDS_ADM5120_DIAG -+ bool "Enable ADM5120 LEDs diagnostic mode" -+ depends on LEDS_ADM5120 -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -5,6 +5,7 @@ - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o - obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o diff --git a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch deleted file mode 100644 index 571c876..0000000 --- a/target/linux/adm5120/patches-2.6.25/007-adm5120_pci.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1704,6 +1704,9 @@ - #define PCI_VENDOR_ID_ESDGMBH 0x12fe - #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -+#define PCI_VENDOR_ID_ADMTEK 0x1317 -+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 -+ - #define PCI_VENDOR_ID_SIIG 0x131f - #define PCI_SUBVENDOR_ID_SIIG 0x131f - #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch deleted file mode 100644 index 18280ed..0000000 --- a/target/linux/adm5120/patches-2.6.25/009-adm5120_leds_switch_trigger.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -213,4 +213,12 @@ - This allows LEDs to be initialised in the ON state. - If unsure, say Y. - -+config LEDS_TRIGGER_ADM5120_SWITCH -+ tristate "LED ADM5120 Switch Port Status Trigger" -+ depends on LEDS_TRIGGERS && LEDS_ADM5120 -+ help -+ This allows LEDs to be controlled by the port states of -+ the ADM5120 built-in Ethernet Switch -+ If unsure, say N. -+ - endif # NEW_LEDS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -30,3 +30,4 @@ - obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o - obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o -+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch deleted file mode 100644 index f518893..0000000 --- a/target/linux/adm5120/patches-2.6.25/100-mtd_myloder_partition_parser.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -168,6 +168,22 @@ - the partition map from the children of the flash node, - as described in Documentation/powerpc/booting-without-of.txt. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on MIPS_ADM5120 && MTD_PARTITIONS -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch deleted file mode 100644 index 9179088..0000000 --- a/target/linux/adm5120/patches-2.6.25/101-cfi_fixup_macronix_bootloc.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -47,12 +47,19 @@ - #define MANUFACTURER_AMD 0x0001 - #define MANUFACTURER_ATMEL 0x001F - #define MANUFACTURER_SST 0x00BF -+#define MANUFACTURER_MACRONIX 0x00C2 - #define SST49LF004B 0x0060 - #define SST49LF040B 0x0050 - #define SST49LF008A 0x005a - #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec - -+/* Macronix */ -+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ -+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ -+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ -+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ -+ - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -221,6 +228,41 @@ - mtd->flags |= MTD_POWERUP_LOCK; - } - -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+/* -+ * Some Macronix chips has no/bad bootblock information in the CFI table -+ */ -+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) -+{ -+ struct map_info *map = mtd->priv; -+ struct cfi_private *cfi = map->fldrv_priv; -+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; -+ __u8 t; -+ -+ switch (cfi->id) { -+ /* TODO: put affected chip ids here */ -+ case MX29LV160B: -+ case MX29LV320B: -+ t = 2; /* Bottom boot */ -+ break; -+ case MX29LV160T: -+ case MX29LV320T: -+ t = 3; /* Top boot */ -+ break; -+ default: -+ return; -+ } -+ -+ if (extp->TopBottom == t) -+ /* boot location detected by the CFI layer is correct */ -+ return; -+ -+ extp->TopBottom = t; -+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " -+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); -+} -+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ -+ - static struct cfi_fixup cfi_fixup_table[] = { - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - #ifdef AMD_BOOTLOC_BUG -@@ -252,6 +294,9 @@ - */ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, - { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, -+#endif - { 0, 0, NULL, NULL } - }; - ---- a/drivers/mtd/chips/Kconfig -+++ b/drivers/mtd/chips/Kconfig -@@ -196,6 +196,14 @@ - provides support for one of those command sets, used on chips - including the AMD Am29LV320. - -+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ bool "Fix boot-block location for Macronix flash chips" -+ depends on MTD_CFI_AMDSTD -+ help -+ Some Macronix flash chips have no/wrong boot-block location in the -+ CFI table, and the driver may detect the type incorrectly. Select -+ this if your board has such chip. -+ - config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" - depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch deleted file mode 100644 index 7f352f6..0000000 --- a/target/linux/adm5120/patches-2.6.25/102-jedec_pmc_39lvxxx_chips.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -121,6 +121,10 @@ - #define UPD29F064115 0x221C - - /* PMC */ -+#define PM39LV512 0x001B -+#define PM39LV010 0x001C -+#define PM39LV020 0x003D -+#define PM39LV040 0x003E - #define PM49FL002 0x006D - #define PM49FL004 0x006E - #define PM49FL008 0x006A -@@ -1170,6 +1174,54 @@ - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1), - } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV512, -+ .name = "PMC Pm39LV512", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_64KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,16), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV010, -+ .name = "PMC Pm39LV010", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_128KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,32), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV020, -+ .name = "PMC Pm39LV020", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_256KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,64), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV040, -+ .name = "PMC Pm39LV040", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_512KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,128), -+ } - }, { - .mfr_id = MANUFACTURER_PMC, - .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch deleted file mode 100644 index 267293a..0000000 --- a/target/linux/adm5120/patches-2.6.25/103-mtd_trxsplit.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -57,6 +57,11 @@ - depends on MTD_PARTITIONS - default y - -+config MTD_TRXSPLIT -+ bool "Automatically find and split TRX partitions" -+ depends on MTD_PARTITIONS -+ default n -+ - config MTD_REDBOOT_PARTS - tristate "RedBoot partition table parsing" - depends on MTD_PARTITIONS ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ - mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o - - obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o -+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch deleted file mode 100644 index 6f371e3..0000000 --- a/target/linux/adm5120/patches-2.6.25/120-rb153_cf_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -71,6 +71,7 @@ - obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o - obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o - obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o -+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o - # Should be last but two libata driver - obj-$(CONFIG_PATA_ACPI) += pata_acpi.o - # Should be last but one libata driver ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -679,4 +679,13 @@ - - If unsure, say N. - -+config PATA_RB153_CF -+ tristate "RouterBOARD 153 Compact Flash support" -+ depends on MIPS_ADM5120 -+ help -+ This option enables support for a Compact Flash connected on -+ the RouterBOARD 153. -+ -+ If unsure, say N. -+ - endif # ATA diff --git a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch deleted file mode 100644 index 1ced3f6..0000000 --- a/target/linux/adm5120/patches-2.6.25/140-cmdline_hack.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -126,7 +126,12 @@ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -+ * Use as temporary storage for the kernel command line, so that it -+ * can be updated easily without having to relink the kernel. - */ -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" - .fill 0x400 - #endif - diff --git a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch deleted file mode 100644 index 97b06ac..0000000 --- a/target/linux/adm5120/patches-2.6.25/200-amba_pl010_hacks.patch +++ /dev/null @@ -1,293 +0,0 @@ ---- a/drivers/serial/amba-pl010.c -+++ b/drivers/serial/amba-pl010.c -@@ -52,11 +52,10 @@ - - #include <asm/io.h> - --#define UART_NR 8 -- - #define SERIAL_AMBA_MAJOR 204 - #define SERIAL_AMBA_MINOR 16 --#define SERIAL_AMBA_NR UART_NR -+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS -+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME - - #define AMBA_ISR_PASS_LIMIT 256 - -@@ -82,7 +81,7 @@ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr &= ~UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -92,7 +91,7 @@ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -102,7 +101,7 @@ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, uap->port.membase + UART010_CR); - } -@@ -112,7 +111,7 @@ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_MSIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -122,9 +121,9 @@ - struct tty_struct *tty = uap->port.info->tty; - unsigned int status, ch, flag, rsr, max_count = 256; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - while (UART_RX_DATA(status) && max_count--) { -- ch = readb(uap->port.membase + UART01x_DR); -+ ch = readl(uap->port.membase + UART01x_DR); - flag = TTY_NORMAL; - - uap->port.icount.rx++; -@@ -133,7 +132,7 @@ - * Note that the error handling code is - * out of the main execution path - */ -- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; -+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); - -@@ -165,7 +164,7 @@ - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); - - ignore_char: -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); -@@ -210,7 +209,7 @@ - - writel(0, uap->port.membase + UART010_ICR); - -- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; -@@ -238,7 +237,7 @@ - - spin_lock(&uap->port.lock); - -- status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); - if (status) { - do { - if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -251,7 +250,7 @@ - if (pass_counter-- == 0) - break; - -- status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); - } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | - UART010_IIR_TIS)); - handled = 1; -@@ -265,7 +264,7 @@ - static unsigned int pl010_tx_empty(struct uart_port *port) - { - struct uart_amba_port *uap = (struct uart_amba_port *)port; -- unsigned int status = readb(uap->port.membase + UART01x_FR); -+ unsigned int status = readl(uap->port.membase + UART01x_FR); - return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; - } - -@@ -275,7 +274,7 @@ - unsigned int result = 0; - unsigned int status; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_DCD) - result |= TIOCM_CAR; - if (status & UART01x_FR_DSR) -@@ -301,7 +300,7 @@ - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else -@@ -334,7 +333,7 @@ - /* - * initialise the old status of the modem signals - */ -- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* - * Finally, enable interrupts -@@ -365,7 +364,7 @@ - writel(0, uap->port.membase + UART010_CR); - - /* disable break condition and fifos */ -- writel(readb(uap->port.membase + UART010_LCRH) & -+ writel(readl(uap->port.membase + UART010_LCRH) & - ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); - -@@ -387,7 +386,7 @@ - /* - * Ask the core to calculate the divisor for us. - */ -- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); -+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { -@@ -450,7 +449,7 @@ - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* first, disable everything */ -- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; -+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= UART010_CR_MSIE; -@@ -540,7 +539,7 @@ - .verify_port = pl010_verify_port, - }; - --static struct uart_amba_port *amba_ports[UART_NR]; -+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; - - #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE - -@@ -550,7 +549,7 @@ - unsigned int status; - - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - barrier(); - } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); -@@ -567,7 +566,7 @@ - /* - * First save the CR then disable the interrupts - */ -- old_cr = readb(uap->port.membase + UART010_CR); -+ old_cr = readl(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - - uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -577,7 +576,7 @@ - * and restore the TCR - */ - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - barrier(); - } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); -@@ -589,9 +588,9 @@ - pl010_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) - { -- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { -+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, quot; -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { -@@ -606,8 +605,8 @@ - else - *bits = 8; - -- quot = readb(uap->port.membase + UART010_LCRL) | -- readb(uap->port.membase + UART010_LCRM) << 8; -+ quot = readl(uap->port.membase + UART010_LCRL) | -+ readl(uap->port.membase + UART010_LCRM) << 8; - *baud = uap->port.uartclk / (16 * (quot + 1)); - } - } -@@ -625,7 +624,7 @@ - * if so, search for the first available port that does have - * console support. - */ -- if (co->index >= UART_NR) -+ if (co->index >= SERIAL_AMBA_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) -@@ -643,7 +642,7 @@ - - static struct uart_driver amba_reg; - static struct console amba_console = { -- .name = "ttyAM", -+ .name = SERIAL_AMBA_NAME, - .write = pl010_console_write, - .device = uart_console_device, - .setup = pl010_console_setup, -@@ -659,11 +658,11 @@ - - static struct uart_driver amba_reg = { - .owner = THIS_MODULE, -- .driver_name = "ttyAM", -- .dev_name = "ttyAM", -+ .driver_name = SERIAL_AMBA_NAME, -+ .dev_name = SERIAL_AMBA_NAME, - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, -- .nr = UART_NR, -+ .nr = SERIAL_AMBA_NR, - .cons = AMBA_CONSOLE, - }; - ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -287,10 +287,25 @@ - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a -- Cirrus Logic EP93xx CPU, say Y or M here. -+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. - - If unsure, say N. - -+config SERIAL_AMBA_PL010_NUMPORTS -+ int "Maximum number of AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "8" -+ ---help--- -+ Set this to the number of serial ports you want the AMBA PL010 driver -+ to support. -+ -+config SERIAL_AMBA_PL010_PORTNAME -+ string "Name of the AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "ttyAM" -+ ---help--- -+ ::: To be written ::: -+ - config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch deleted file mode 100644 index 299f216..0000000 --- a/target/linux/adm5120/patches-2.6.25/201-amba_bus_hacks.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/amba/bus.c -+++ b/drivers/amba/bus.c -@@ -17,6 +17,10 @@ - #include <asm/io.h> - #include <asm/sizes.h> - -+#ifndef NO_IRQ -+#define NO_IRQ (-1) -+#endif -+ - #define to_amba_device(d) container_of(d, struct amba_device, dev) - #define to_amba_driver(d) container_of(d, struct amba_driver, drv) - diff --git a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch deleted file mode 100644 index 2514988..0000000 --- a/target/linux/adm5120/patches-2.6.25/202-pci_disable_common_quirks.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -42,6 +42,12 @@ - - When in doubt, say N. - -+config PCI_DISABLE_COMMON_QUIRKS -+ bool "PCI disable common quirks" -+ depends on PCI -+ help -+ If you don't know what to do here, say N. -+ - config HT_IRQ - bool "Interrupts on hypertransport devices" - default y ---- a/drivers/pci/quirks.c -+++ b/drivers/pci/quirks.c -@@ -24,6 +24,7 @@ - #include <linux/kallsyms.h> - #include "pci.h" - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - /* The Mellanox Tavor device gives false positive parity errors - * Mark this device with a broken_parity_status, to allow - * PCI scanning code to "skip" this now blacklisted device. -@@ -1495,6 +1496,7 @@ - } - } - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ - - static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) - { -@@ -1562,6 +1564,7 @@ - } - EXPORT_SYMBOL(pci_fixup_device); - -+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS - /* Enable 1k I/O space granularity on the Intel P64H2 */ - static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) - { -@@ -1875,3 +1878,4 @@ - quirk_msi_intx_disable_bug); - - #endif /* CONFIG_PCI_MSI */ -+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */ diff --git a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch deleted file mode 100644 index 06394da..0000000 --- a/target/linux/adm5120/patches-2.6.25/203-gpio_leds_brightness.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -41,13 +41,17 @@ - container_of(led_cdev, struct gpio_led_data, cdev); - int level; - -- if (value == LED_OFF) -- level = 0; -- else -- level = 1; -- -- if (led_dat->active_low) -- level = !level; -+ switch (value) { -+ case LED_OFF: -+ level = led_dat->active_low ? 1 : 0; -+ break; -+ case LED_FULL: -+ level = led_dat->active_low ? 0 : 1; -+ break; -+ default: -+ level = value; -+ break; -+ } - - /* Setting GPIOs with I2C/etc requires a task context, and we don't - * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch deleted file mode 100644 index 78eb628..0000000 --- a/target/linux/adm5120/patches-2.6.25/310-adm5120_wdt.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -619,6 +619,18 @@ - - # MIPS Architecture - -+config ADM5120_WDT -+ tristate "Infineon ADM5120 SoC hardware watchdog" -+ depends on WATCHDOG && MIPS_ADM5120 -+ help -+ This is a driver for hardware watchdog integrated in Infineon -+ ADM5120 SoC. This watchdog simply watches your kernel to make sure -+ it doesn't freeze, and if it does, it reboots your computer after a -+ certain amount of time. -+ -+ To compile this driver as a module, choose M here: the module will be -+ called adm5120_wdt. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on SGI_HAS_INDYDOG ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -90,6 +90,7 @@ - # M68KNOMMU Architecture - - # MIPS Architecture -+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o diff --git a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch b/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch deleted file mode 100644 index d15c89c..0000000 --- a/target/linux/adm5120/patches-2.6.25/900-usb_bump_version_number.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/usb/host/adm5120-hcd.c -+++ b/drivers/usb/host/adm5120-hcd.c -@@ -45,7 +45,7 @@ - #include "../core/hcd.h" - #include "../core/hub.h" - --#define DRIVER_VERSION "0.24.0" -+#define DRIVER_VERSION "0.25.0" - #define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>" - #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" - diff --git a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch b/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch deleted file mode 100644 index da868cc..0000000 --- a/target/linux/adm5120/patches-2.6.25/901-usb_convert_from_class_device.patch +++ /dev/null @@ -1,107 +0,0 @@ ---- a/drivers/usb/host/adm5120-dbg.c -+++ b/drivers/usb/host/adm5120-dbg.c -@@ -456,7 +456,7 @@ - } - - static ssize_t --show_async(struct class_device *class_dev, char *buf) -+show_async(struct device *dev, struct device_attribute *attr, char *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -464,7 +464,7 @@ - size_t temp; - unsigned long flags; - -- bus = class_get_devdata(class_dev); -+ bus = dev_get_drvdata(dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); - -@@ -475,13 +475,13 @@ - - return temp; - } --static CLASS_DEVICE_ATTR(async, S_IRUGO, show_async, NULL); -+static DEVICE_ATTR(async, S_IRUGO, show_async, NULL); - - - #define DBG_SCHED_LIMIT 64 - - static ssize_t --show_periodic(struct class_device *class_dev, char *buf) -+show_periodic(struct device *dev, struct device_attribute *attr, char *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -496,7 +496,7 @@ - return 0; - seen_count = 0; - -- bus = class_get_devdata(class_dev); -+ bus = dev_get_drvdata(dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); - next = buf; -@@ -574,13 +574,13 @@ - - return PAGE_SIZE - size; - } --static CLASS_DEVICE_ATTR(periodic, S_IRUGO, show_periodic, NULL); -+static DEVICE_ATTR(periodic, S_IRUGO, show_periodic, NULL); - - - #undef DBG_SCHED_LIMIT - - static ssize_t --show_registers(struct class_device *class_dev, char *buf) -+show_registers(struct device *dev, struct device_attribute *attr, char *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -591,7 +591,7 @@ - char *next; - u32 rdata; - -- bus = class_get_devdata(class_dev); -+ bus = dev_get_drvdata(dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); - regs = ahcd->regs; -@@ -656,27 +656,27 @@ - spin_unlock_irqrestore(&ahcd->lock, flags); - return PAGE_SIZE - size; - } --static CLASS_DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); -+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - - - static inline void create_debug_files (struct admhcd *ahcd) - { -- struct class_device *cldev = admhcd_to_hcd(ahcd)->self.class_dev; -+ struct device *dev = admhcd_to_hcd(ahcd)->self.dev; - int retval; - -- retval = class_device_create_file(cldev, &class_device_attr_async); -- retval = class_device_create_file(cldev, &class_device_attr_periodic); -- retval = class_device_create_file(cldev, &class_device_attr_registers); -+ retval = device_create_file(dev, &dev_attr_async); -+ retval = device_create_file(dev, &dev_attr_periodic); -+ retval = device_create_file(dev, &dev_attr_registers); - admhc_dbg(ahcd, "created debug files\n"); - } - - static inline void remove_debug_files (struct admhcd *ahcd) - { -- struct class_device *cldev = admhcd_to_hcd(ahcd)->self.class_dev; -+ struct device *dev = admhcd_to_hcd(ahcd)->self.dev; - -- class_device_remove_file(cldev, &class_device_attr_async); -- class_device_remove_file(cldev, &class_device_attr_periodic); -- class_device_remove_file(cldev, &class_device_attr_registers); -+ device_remove_file(dev, &dev_attr_async); -+ device_remove_file(dev, &dev_attr_periodic); -+ device_remove_file(dev, &dev_attr_registers); - } - - #endif diff --git a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch b/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch deleted file mode 100644 index 5b513c0..0000000 --- a/target/linux/adm5120/patches-2.6.25/902-usb_use_debugfs_instead_of_sysfs.patch +++ /dev/null @@ -1,357 +0,0 @@ ---- a/drivers/usb/host/adm5120.h -+++ b/drivers/usb/host/adm5120.h -@@ -431,6 +431,13 @@ - #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ - #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ - // there are also chip quirks/bugs in init logic -+ -+#ifdef DEBUG -+ struct dentry *debug_dir; -+ struct dentry *debug_async; -+ struct dentry *debug_periodic; -+ struct dentry *debug_registers; -+#endif - }; - - /* convert between an hcd pointer and the corresponding ahcd_hcd */ ---- a/drivers/usb/host/adm5120-hcd.c -+++ b/drivers/usb/host/adm5120-hcd.c -@@ -35,6 +35,7 @@ - #include <linux/dma-mapping.h> - #include <linux/dmapool.h> - #include <linux/reboot.h> -+#include <linux/debugfs.h> - - #include <asm/io.h> - #include <asm/irq.h> -@@ -804,6 +805,14 @@ - pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, - sizeof (struct ed), sizeof (struct td)); - -+#ifdef DEBUG -+ admhc_debug_root = debugfs_create_dir("admhc", NULL); -+ if (!admhc_debug_root) { -+ ret = -ENOENT; -+ goto error_debug; -+ } -+#endif -+ - #ifdef PLATFORM_DRIVER - ret = platform_driver_register(&PLATFORM_DRIVER); - if (ret < 0) -@@ -816,6 +825,12 @@ - platform_driver_unregister(&PLATFORM_DRIVER); - error_platform: - #endif -+ -+#ifdef DEBUG -+ debugfs_remove(admhc_debug_root); -+ admhc_debug_root = NULL; -+error_debug: -+#endif - return ret; - } - module_init(admhc_hcd_mod_init); -@@ -823,6 +838,9 @@ - static void __exit admhc_hcd_mod_exit(void) - { - platform_driver_unregister(&PLATFORM_DRIVER); -+#ifdef DEBUG -+ debugfs_remove(admhc_debug_root); -+#endif - } - module_exit(admhc_hcd_mod_exit); - ---- a/drivers/usb/host/adm5120-dbg.c -+++ b/drivers/usb/host/adm5120-dbg.c -@@ -390,6 +390,42 @@ - - #else - -+static int debug_async_open(struct inode *, struct file *); -+static int debug_periodic_open(struct inode *, struct file *); -+static int debug_registers_open(struct inode *, struct file *); -+static int debug_async_open(struct inode *, struct file *); -+static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); -+static int debug_close(struct inode *, struct file *); -+ -+static const struct file_operations debug_async_fops = { -+ .owner = THIS_MODULE, -+ .open = debug_async_open, -+ .read = debug_output, -+ .release = debug_close, -+}; -+static const struct file_operations debug_periodic_fops = { -+ .owner = THIS_MODULE, -+ .open = debug_periodic_open, -+ .read = debug_output, -+ .release = debug_close, -+}; -+static const struct file_operations debug_registers_fops = { -+ .owner = THIS_MODULE, -+ .open = debug_registers_open, -+ .read = debug_output, -+ .release = debug_close, -+}; -+ -+static struct dentry *admhc_debug_root; -+ -+struct debug_buffer { -+ ssize_t (*fill_func)(struct debug_buffer *); /* fill method */ -+ struct device *dev; -+ struct mutex mutex; /* protect filling of buffer */ -+ size_t count; /* number of characters filled into buffer */ -+ char *page; -+}; -+ - static ssize_t - show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed) - { -@@ -455,8 +491,7 @@ - return count - size; - } - --static ssize_t --show_async(struct device *dev, struct device_attribute *attr, char *buf) -+static ssize_t fill_async_buffer(struct debug_buffer *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -464,24 +499,22 @@ - size_t temp; - unsigned long flags; - -- bus = dev_get_drvdata(dev); -+ bus = dev_get_drvdata(buf->dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); - - /* display control and bulk lists together, for simplicity */ - spin_lock_irqsave(&ahcd->lock, flags); -- temp = show_list(ahcd, buf, PAGE_SIZE, ahcd->ed_head); -+ temp = show_list(ahcd, buf->page, buf->count, ahcd->ed_head); - spin_unlock_irqrestore(&ahcd->lock, flags); - - return temp; - } --static DEVICE_ATTR(async, S_IRUGO, show_async, NULL); - - - #define DBG_SCHED_LIMIT 64 - --static ssize_t --show_periodic(struct device *dev, struct device_attribute *attr, char *buf) -+static ssize_t fill_periodic_buffer(struct debug_buffer *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -496,10 +529,10 @@ - return 0; - seen_count = 0; - -- bus = dev_get_drvdata(dev); -+ bus = dev_get_drvdata(buf->dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); -- next = buf; -+ next = buf->page; - size = PAGE_SIZE; - - temp = scnprintf(next, size, "size = %d\n", NUM_INTS); -@@ -574,13 +607,11 @@ - - return PAGE_SIZE - size; - } --static DEVICE_ATTR(periodic, S_IRUGO, show_periodic, NULL); - - - #undef DBG_SCHED_LIMIT - --static ssize_t --show_registers(struct device *dev, struct device_attribute *attr, char *buf) -+static ssize_t fill_registers_buffer(struct debug_buffer *buf) - { - struct usb_bus *bus; - struct usb_hcd *hcd; -@@ -591,11 +622,11 @@ - char *next; - u32 rdata; - -- bus = dev_get_drvdata(dev); -+ bus = dev_get_drvdata(buf->dev); - hcd = bus_to_hcd(bus); - ahcd = hcd_to_admhcd(hcd); - regs = ahcd->regs; -- next = buf; -+ next = buf->page; - size = PAGE_SIZE; - - spin_lock_irqsave(&ahcd->lock, flags); -@@ -656,27 +687,154 @@ - spin_unlock_irqrestore(&ahcd->lock, flags); - return PAGE_SIZE - size; - } --static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - - --static inline void create_debug_files (struct admhcd *ahcd) -+static struct debug_buffer *alloc_buffer(struct device *dev, -+ ssize_t (*fill_func)(struct debug_buffer *)) - { -- struct device *dev = admhcd_to_hcd(ahcd)->self.dev; -- int retval; -+ struct debug_buffer *buf; - -- retval = device_create_file(dev, &dev_attr_async); -- retval = device_create_file(dev, &dev_attr_periodic); -- retval = device_create_file(dev, &dev_attr_registers); -- admhc_dbg(ahcd, "created debug files\n"); -+ buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL); -+ -+ if (buf) { -+ buf->dev = dev; -+ buf->fill_func = fill_func; -+ mutex_init(&buf->mutex); -+ } -+ -+ return buf; -+} -+ -+static int fill_buffer(struct debug_buffer *buf) -+{ -+ int ret = 0; -+ -+ if (!buf->page) -+ buf->page = (char *)get_zeroed_page(GFP_KERNEL); -+ -+ if (!buf->page) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ ret = buf->fill_func(buf); -+ -+ if (ret >= 0) { -+ buf->count = ret; -+ ret = 0; -+ } -+ -+out: -+ return ret; -+} -+ -+static ssize_t debug_output(struct file *file, char __user *user_buf, -+ size_t len, loff_t *offset) -+{ -+ struct debug_buffer *buf = file->private_data; -+ int ret = 0; -+ -+ mutex_lock(&buf->mutex); -+ if (buf->count == 0) { -+ ret = fill_buffer(buf); -+ if (ret != 0) { -+ mutex_unlock(&buf->mutex); -+ goto out; -+ } -+ } -+ mutex_unlock(&buf->mutex); -+ -+ ret = simple_read_from_buffer(user_buf, len, offset, -+ buf->page, buf->count); -+ -+out: -+ return ret; -+} -+ -+static int debug_close(struct inode *inode, struct file *file) -+{ -+ struct debug_buffer *buf = file->private_data; -+ -+ if (buf) { -+ if (buf->page) -+ free_page((unsigned long)buf->page); -+ kfree(buf); -+ } -+ -+ return 0; - } - --static inline void remove_debug_files (struct admhcd *ahcd) -+static int debug_async_open(struct inode *inode, struct file *file) - { -- struct device *dev = admhcd_to_hcd(ahcd)->self.dev; -+ file->private_data = alloc_buffer(inode->i_private, fill_async_buffer); -+ -+ return file->private_data ? 0 : -ENOMEM; -+} -+ -+static int debug_periodic_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = alloc_buffer(inode->i_private, -+ fill_periodic_buffer); -+ -+ return file->private_data ? 0 : -ENOMEM; -+} - -- device_remove_file(dev, &dev_attr_async); -- device_remove_file(dev, &dev_attr_periodic); -- device_remove_file(dev, &dev_attr_registers); -+static int debug_registers_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = alloc_buffer(inode->i_private, -+ fill_registers_buffer); -+ -+ return file->private_data ? 0 : -ENOMEM; -+} -+ -+static inline void create_debug_files(struct admhcd *ahcd) -+{ -+ struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self; -+ struct device *dev = bus->dev; -+ -+ ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root); -+ if (!ahcd->debug_dir) -+ goto dir_error; -+ -+ ahcd->debug_async = debugfs_create_file("async", S_IRUGO, -+ ahcd->debug_dir, dev, -+ &debug_async_fops); -+ if (!ahcd->debug_async) -+ goto async_error; -+ -+ ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO, -+ ahcd->debug_dir, dev, -+ &debug_periodic_fops); -+ if (!ahcd->debug_periodic) -+ goto periodic_error; -+ -+ ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO, -+ ahcd->debug_dir, dev, -+ &debug_registers_fops); -+ if (!ahcd->debug_registers) -+ goto registers_error; -+ -+ admhc_dbg(ahcd, "created debug files\n"); -+ return; -+ -+registers_error: -+ debugfs_remove(ahcd->debug_periodic); -+periodic_error: -+ debugfs_remove(ahcd->debug_async); -+async_error: -+ debugfs_remove(ahcd->debug_dir); -+dir_error: -+ ahcd->debug_periodic = NULL; -+ ahcd->debug_async = NULL; -+ ahcd->debug_dir = NULL; -+} -+ -+static inline void remove_debug_files(struct admhcd *ahcd) -+{ -+ debugfs_remove(ahcd->debug_registers); -+ debugfs_remove(ahcd->debug_periodic); -+ debugfs_remove(ahcd->debug_async); -+ debugfs_remove(ahcd->debug_dir); - } - - #endif diff --git a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch b/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch deleted file mode 100644 index 27ae067..0000000 --- a/target/linux/adm5120/patches-2.6.25/910-pata_rb153_cf_fix_compiler_warning.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/drivers/ata/pata_rb153_cf.c -+++ b/drivers/ata/pata_rb153_cf.c -@@ -68,20 +68,23 @@ - rb153_pata_finish_io(ap); - } - --static void rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf, -+static unsigned int rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) - { - void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr; -- -+ unsigned int t; -+ -+ t = buflen; - if (write_data) { -- for (; buflen > 0; buflen--, buf++) -+ for (; t > 0; t--, buf++) - writeb(*buf, ioaddr); - } else { -- for (; buflen > 0; buflen--, buf++) -+ for (; t > 0; t--, buf++) - *buf = readb(ioaddr); - } - - rb153_pata_finish_io(adev->link->ap); -+ return buflen; - } - - static void rb153_pata_freeze(struct ata_port *ap) diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch index 26c0265..84d0a8d 100644 --- a/target/linux/adm5120/patches/001-adm5120.patch +++ b/target/linux/adm5120/patches/001-adm5120.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -16,6 +16,20 @@ +@@ -18,6 +18,20 @@ prompt "System type" default SGI_IP22 @@ -21,17 +21,17 @@ config MACH_ALCHEMY bool "Alchemy processor based machines" -@@ -689,6 +703,7 @@ +@@ -683,6 +697,7 @@ endchoice +source "arch/mips/adm5120/Kconfig" source "arch/mips/au1000/Kconfig" + source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" - source "arch/mips/lasat/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -166,6 +166,16 @@ +@@ -174,6 +174,16 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # @@ -50,9 +50,9 @@ core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h -@@ -198,6 +198,58 @@ - #define MACH_GROUP_BRCM 23 /* Broadcom */ - #define MACH_BCM47XX 1 /* Broadcom BCM47XX */ +@@ -94,6 +94,58 @@ + #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ + #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ +/* + * Valid machtype for group ADMtek ADM5120 @@ -108,4 +108,4 @@ + #define CL_SIZE COMMAND_LINE_SIZE - const char *get_system_type(void); + extern char *system_type; diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch index d2326fa..1439523 100644 --- a/target/linux/adm5120/patches/002-adm5120_flash.patch +++ b/target/linux/adm5120/patches/002-adm5120_flash.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig -@@ -597,5 +597,9 @@ +@@ -590,5 +590,9 @@ This selection automatically selects the map_ram driver. @@ -12,7 +12,7 @@ --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile -@@ -45,6 +45,7 @@ +@@ -44,6 +44,7 @@ obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch index 1d2e428..2071811 100644 --- a/target/linux/adm5120/patches/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches/003-adm5120_switch.patch @@ -1,6 +1,6 @@ --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig -@@ -601,6 +601,10 @@ +@@ -606,6 +606,10 @@ If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,7 +13,7 @@ depends on PCI && SGI_IP27 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -183,6 +183,7 @@ +@@ -187,6 +187,7 @@ # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch index ef9a4fd..4ab31dd 100644 --- a/target/linux/adm5120/patches/005-adm5120_usb.patch +++ b/target/linux/adm5120/patches/005-adm5120_usb.patch @@ -1,6 +1,6 @@ --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig -@@ -261,3 +261,6 @@ +@@ -260,3 +260,6 @@ To compile this driver as a module, choose M here: the module will be called r8a66597-hcd. diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch index 6c8886d..ac108e5 100644 --- a/target/linux/adm5120/patches/006-adm5120_leds.patch +++ b/target/linux/adm5120/patches/006-adm5120_leds.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -18,6 +18,21 @@ - - comment "LED drivers" +@@ -25,6 +25,21 @@ + This option enables support for LEDs driven using outputs + of the dedicated PWM controller found on newer Atmel SOCs. +config LEDS_ADM5120 + tristate "LED Support for ADM5120 GPIO LEDs" @@ -29,6 +29,6 @@ # LED Platform Drivers +obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o + obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch index 540b7d9..75d3be6 100644 --- a/target/linux/adm5120/patches/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches/007-adm5120_pci.patch @@ -7,7 +7,7 @@ +obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1703,6 +1703,9 @@ +@@ -1705,6 +1705,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch index bb04038..18280ed 100644 --- a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -178,4 +178,12 @@ +@@ -213,4 +213,12 @@ This allows LEDs to be initialised in the ON state. If unsure, say Y. @@ -15,7 +15,7 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -28,3 +28,4 @@ +@@ -30,3 +30,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch index fe9c45b..f518893 100644 --- a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch +++ b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch @@ -1,8 +1,8 @@ --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig -@@ -160,6 +160,22 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. +@@ -168,6 +168,22 @@ + the partition map from the children of the flash node, + as described in Documentation/powerpc/booting-without-of.txt. +config MTD_MYLOADER_PARTS + tristate "MyLoader partition parsing" @@ -25,10 +25,10 @@ config MTD_CHAR --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o +@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o + obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o +obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch index 9acb626..9179088 100644 --- a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch @@ -20,8 +20,8 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -217,6 +224,41 @@ - mtd->flags |= MTD_STUPID_LOCK; +@@ -221,6 +228,41 @@ + mtd->flags |= MTD_POWERUP_LOCK; } +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC @@ -60,18 +60,18 @@ +#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ + static struct cfi_fixup cfi_fixup_table[] = { - #ifdef AMD_BOOTLOC_BUG - { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, -@@ -231,6 +273,9 @@ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, - #endif { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + #ifdef AMD_BOOTLOC_BUG +@@ -252,6 +294,9 @@ + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC + { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, +#endif { 0, 0, NULL, NULL } }; - static struct cfi_fixup jedec_fixup_table[] = { + --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -196,6 +196,14 @@ diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch index 0c512ea..7f352f6 100644 --- a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch @@ -11,7 +11,7 @@ #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1264,6 +1268,58 @@ +@@ -1170,6 +1174,54 @@ ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } @@ -19,12 +19,11 @@ + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM39LV512, + .name = "PMC Pm39LV512", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_64KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_64KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,16), + } @@ -32,12 +31,11 @@ + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM39LV010, + .name = "PMC Pm39LV010", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_128KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_128KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,32), + } @@ -45,12 +43,11 @@ + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM39LV020, + .name = "PMC Pm39LV020", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_256KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_256KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,64), + } @@ -58,12 +55,11 @@ + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM39LV040, + .name = "PMC Pm39LV040", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_512KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_512KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch index ad07b7a..6f371e3 100644 --- a/target/linux/adm5120/patches/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches/120-rb153_cf_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile -@@ -69,6 +69,7 @@ +@@ -71,6 +71,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o @@ -10,7 +10,7 @@ # Should be last but one libata driver --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig -@@ -660,4 +660,13 @@ +@@ -679,4 +679,13 @@ If unsure, say N. diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch index 13142ad..2514988 100644 --- a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch +++ b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch @@ -15,15 +15,15 @@ default y --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c -@@ -23,6 +23,7 @@ - #include <linux/acpi.h> +@@ -24,6 +24,7 @@ + #include <linux/kallsyms.h> #include "pci.h" +#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. -@@ -1480,6 +1481,7 @@ +@@ -1495,6 +1496,7 @@ } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); @@ -31,7 +31,7 @@ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { -@@ -1543,6 +1545,7 @@ +@@ -1562,6 +1564,7 @@ } EXPORT_SYMBOL(pci_fixup_device); @@ -39,7 +39,7 @@ /* Enable 1k I/O space granularity on the Intel P64H2 */ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) { -@@ -1756,3 +1759,4 @@ +@@ -1875,3 +1878,4 @@ quirk_msi_intx_disable_bug); #endif /* CONFIG_PCI_MSI */ diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch index 3e9f527..06394da 100644 --- a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch @@ -23,5 +23,5 @@ + break; + } - /* setting GPIOs with I2C/etc requires a preemptible task context */ - if (led_dat->can_sleep) { + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch index 1136ee8..78eb628 100644 --- a/target/linux/adm5120/patches/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches/310-adm5120_wdt.patch @@ -1,6 +1,6 @@ --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -607,6 +607,18 @@ +@@ -619,6 +619,18 @@ # MIPS Architecture @@ -18,10 +18,10 @@ + config INDYDOG tristate "Indy/I2 Hardware Watchdog" - depends on SGI_IP22 + depends on SGI_HAS_INDYDOG --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -89,6 +89,7 @@ +@@ -90,6 +90,7 @@ # M68KNOMMU Architecture # MIPS Architecture diff --git a/target/linux/adm5120/router_be/config-2.6.25 b/target/linux/adm5120/router_be/config-2.6.25 deleted file mode 100644 index b61be5c..0000000 --- a/target/linux/adm5120/router_be/config-2.6.25 +++ /dev/null @@ -1,269 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_ADM5120_CPU_OVERRIDES=y -CONFIG_ADM5120_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_AMBA=y -CONFIG_BASE_SMALL=0 -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -# CONFIG_BCM47XX is not set -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -CONFIG_CEVT_R4K=y -CONFIG_CIFS_DEBUG2=y -CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_XATTR=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_EXT3_FS_XATTR=y -CONFIG_FS_MBCACHE=m -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=m -# CONFIG_INPUT_EVDEV is not set -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IRQ_CPU=y -# CONFIG_JOLIET is not set -CONFIG_LEDS_ADM5120=m -# CONFIG_LEDS_ADM5120_DIAG is not set -# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set -# CONFIG_LEDS_ALIX is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_LEMOTE_FULONG is not set -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MEMSTICK is not set -CONFIG_MII=m -# CONFIG_MINIX_FS is not set -CONFIG_MIPS=y -CONFIG_MIPS_ADM5120=y -CONFIG_MIPS_ADM5120_ENET=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_ADM5120=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_MYLOADER_PARTS is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_MTD_TRXSPLIT=y -# CONFIG_NET_PCI is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PCI=y -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_ADM5120=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_RTC is not set -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SLABINFO=y -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_THERMAL is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -# CONFIG_USBPCWATCHDOG is not set -CONFIG_USB_ADM5120_HCD=m -CONFIG_USB_DEBUG=y -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/router_be/config-default b/target/linux/adm5120/router_be/config-default index 3d0c41f..b61be5c 100644 --- a/target/linux/adm5120/router_be/config-default +++ b/target/linux/adm5120/router_be/config-default @@ -7,6 +7,7 @@ CONFIG_ADM5120_WDT=y CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_AMBA=y CONFIG_BASE_SMALL=0 CONFIG_BAYCOM_SER_FDX=m @@ -20,6 +21,7 @@ CONFIG_CIFS_EXPERIMENTAL=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_XATTR=y +CONFIG_CLASSIC_RCU=y CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" CONFIG_CPU_BIG_ENDIAN=y CONFIG_CPU_HAS_LLSC=y @@ -50,12 +52,15 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CSRC_R4K=y CONFIG_DEVPORT=y # CONFIG_DM9000 is not set CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y -# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set CONFIG_EARLY_PRINTK=y CONFIG_ELF_CORE=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -73,6 +78,10 @@ CONFIG_GENERIC_GPIO=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAVE_IDE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_HAVE_OPROFILE=y CONFIG_HID=m CONFIG_HID_SUPPORT=y CONFIG_HW_HAS_PCI=y @@ -92,7 +101,6 @@ CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_INPUT=m # CONFIG_INPUT_EVDEV is not set -# CONFIG_IP1000 is not set CONFIG_IPV6_MIP6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTE_INFO=y @@ -103,15 +111,19 @@ CONFIG_IRQ_CPU=y CONFIG_LEDS_ADM5120=m # CONFIG_LEDS_ADM5120_DIAG is not set # CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set +# CONFIG_LEDS_ALIX is not set CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_LEMOTE_FULONG is not set +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m # CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_MEMSTICK is not set CONFIG_MII=m # CONFIG_MINIX_FS is not set CONFIG_MIPS=y @@ -174,7 +186,6 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_SLRAM is not set CONFIG_MTD_TRXSPLIT=y -CONFIG_NETDEV_1000=y # CONFIG_NET_PCI is not set # CONFIG_NET_PKTGEN is not set # CONFIG_NET_VENDOR_3COM is not set @@ -213,18 +224,17 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SWARM is not set CONFIG_SLABINFO=y -# CONFIG_SND_USB_AUDIO is not set CONFIG_SOFT_WATCHDOG=m # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set @@ -236,6 +246,7 @@ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_THERMAL is not set CONFIG_TICK_ONESHOT=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_TOSHIBA_JMR3927 is not set @@ -244,21 +255,15 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_TRAD_SIGNALS=y CONFIG_USB=m # CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_ACM is not set CONFIG_USB_ADM5120_HCD=m -# CONFIG_USB_ATM is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_STORAGE is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USER_NS is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_ZD1211RW is not set CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/router_le/config-2.6.25 b/target/linux/adm5120/router_le/config-2.6.25 deleted file mode 100644 index 25ca729..0000000 --- a/target/linux/adm5120/router_le/config-2.6.25 +++ /dev/null @@ -1,291 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_ADM5120_CPU_OVERRIDES=y -CONFIG_ADM5120_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_AMBA=y -CONFIG_BASE_SMALL=0 -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -# CONFIG_BCM47XX is not set -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -CONFIG_CEVT_R4K=y -CONFIG_CIFS_DEBUG2=y -CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_XATTR=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_EXT3_FS_XATTR=y -CONFIG_FS_MBCACHE=m -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=m -# CONFIG_INPUT_EVDEV is not set -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IRQ_CPU=y -# CONFIG_JOLIET is not set -CONFIG_LEDS_ADM5120=m -# CONFIG_LEDS_ADM5120_DIAG is not set -# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set -# CONFIG_LEDS_ALIX is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_LEMOTE_FULONG is not set -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MEMSTICK is not set -CONFIG_MII=m -# CONFIG_MINIX_FS is not set -CONFIG_MIPS=y -CONFIG_MIPS_ADM5120=y -CONFIG_MIPS_ADM5120_ENET=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_ADM5120=y -# CONFIG_MTD_ALAUDA is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_MTD_TRXSPLIT=y -# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PCI=y -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_ADM5120=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_RTC is not set -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SLABINFO=y -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_THERMAL is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -# CONFIG_USBPCWATCHDOG is not set -CONFIG_USB_ADM5120_HCD=m -CONFIG_USB_DEBUG=y -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_YAFFS_9BYTE_TAGS=y -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_AUTO_YAFFS2=y -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/router_le/config-default b/target/linux/adm5120/router_le/config-default index cf4044a..25ca729 100644 --- a/target/linux/adm5120/router_le/config-default +++ b/target/linux/adm5120/router_le/config-default @@ -7,6 +7,7 @@ CONFIG_ADM5120_WDT=y CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_AMBA=y CONFIG_BASE_SMALL=0 CONFIG_BAYCOM_SER_FDX=m @@ -20,6 +21,7 @@ CONFIG_CIFS_EXPERIMENTAL=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_XATTR=y +CONFIG_CLASSIC_RCU=y CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_HAS_LLSC=y @@ -50,11 +52,15 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_GF128MUL=m CONFIG_CSRC_R4K=y CONFIG_DEVPORT=y # CONFIG_DM9000 is not set CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y +# CONFIG_E1000E_ENABLED is not set CONFIG_EARLY_PRINTK=y CONFIG_ELF_CORE=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -72,6 +78,10 @@ CONFIG_GENERIC_GPIO=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAVE_IDE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_HAVE_OPROFILE=y CONFIG_HID=m CONFIG_HID_SUPPORT=y CONFIG_HW_HAS_PCI=y @@ -101,15 +111,19 @@ CONFIG_IRQ_CPU=y CONFIG_LEDS_ADM5120=m # CONFIG_LEDS_ADM5120_DIAG is not set # CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set +# CONFIG_LEDS_ALIX is not set CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_LEMOTE_FULONG is not set +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m # CONFIG_MACH_ALCHEMY is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_MEMSTICK is not set CONFIG_MII=m # CONFIG_MINIX_FS is not set CONFIG_MIPS=y @@ -221,13 +235,13 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CRHONE is not set # CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SWARM is not set @@ -243,6 +257,7 @@ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_THERMAL is not set CONFIG_TICK_ONESHOT=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_TOSHIBA_JMR3927 is not set @@ -252,26 +267,16 @@ CONFIG_TRAD_SIGNALS=y CONFIG_USB=m # CONFIG_USBPCWATCHDOG is not set CONFIG_USB_ADM5120_HCD=m -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -# CONFIG_USB_CATC is not set CONFIG_USB_DEBUG=y CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_SERIAL is not set +# CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_UHCI_HCD is not set -# CONFIG_USER_NS is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VM_EVENT_COUNTERS=y CONFIG_YAFFS_9BYTE_TAGS=y # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set @@ -283,5 +288,4 @@ CONFIG_YAFFS_FS=y CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_YAFFS_YAFFS1=y CONFIG_YAFFS_YAFFS2=y -# CONFIG_ZD1211RW is not set CONFIG_ZONE_DMA_FLAG=0 |