summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--package/mac80211/Config.in11
-rw-r--r--package/mac80211/Config.in.ath9k16
-rw-r--r--package/mac80211/Config.in.b4379
-rw-r--r--package/mac80211/Config.in.b43legacy24
-rw-r--r--package/mac80211/Config.in.rt2x0015
-rw-r--r--package/mac80211/Makefile206
6 files changed, 184 insertions, 167 deletions
diff --git a/package/mac80211/Config.in b/package/mac80211/Config.in
deleted file mode 100644
index 5994ba7..0000000
--- a/package/mac80211/Config.in
+++ /dev/null
@@ -1,11 +0,0 @@
-# mac80211 configuration
-
-config PACKAGE_MAC80211_DEBUGFS
- bool "Export mac80211 internals in DebugFS"
- depends on PACKAGE_kmod-mac80211
- default y
- ---help---
- Select this to see extensive information about
- the internal state of mac80211 in debugfs.
-
- Say N unless you know you need this.
diff --git a/package/mac80211/Config.in.ath9k b/package/mac80211/Config.in.ath9k
deleted file mode 100644
index 70a36c9..0000000
--- a/package/mac80211/Config.in.ath9k
+++ /dev/null
@@ -1,16 +0,0 @@
-# mac80211 configuration
-
-config PACKAGE_ATH9K_DEBUG
- bool "ath9k debugging"
- depends PACKAGE_kmod-ath9k && KERNEL_DEBUG_FS
- ---help---
- Say Y, if you need ath9k to display debug messages.
- Pass the debug mask as a module parameter:
-
- modprobe ath9k debug=0x00002000
-
- Look in ath9k/core.h for possible debug masks
-
-config PACKAGE_ATH9K_USE_MINSTREL
- bool "use the new minstrel_ht rate control for ath9k"
- depends PACKAGE_kmod-ath9k
diff --git a/package/mac80211/Config.in.b43 b/package/mac80211/Config.in.b43
deleted file mode 100644
index e1f4d37..0000000
--- a/package/mac80211/Config.in.b43
+++ /dev/null
@@ -1,79 +0,0 @@
-# B43 configuration
-
-choice
- prompt "b43 firmware version"
- depends on PACKAGE_kmod-b43
- default B43_EXPERIMENTAL
- help
- This option allows you to select the version of the b43 firmware.
-
-config B43_STABLE
- bool "4.150.10.5 (stable)"
- help
- Stable firmware for BCM43xx devices.
-
- If unsure, select this.
-
-config B43_EXPERIMENTAL
- bool "4.178.10.4 (experimental)"
- help
- Experimental firmware for BCM43xx devices.
-
- This firmware is not tested as much as the "stable" firmware.
-
- If unsure, select the "stable" firmware.
-
-config B43_OPENFIRMWARE
- bool "Open FirmWare for WiFi networks"
- help
- Opensource firmware for BCM43xx devices.
-
- Do _not_ select this, unless you know what you are doing.
- The Opensource firmware is not suitable for embedded devices, yet.
- It does not support QoS, which is bad for AccessPoints.
- It does not support hardware crypto acceleration, which is a showstopper
- for embedded devices with low CPU resources.
-
- If unsure, select the "stable" firmware.
-
-endchoice
-
-config B43_FW_SQUASH
- bool "Remove unnecessary firmware files"
- depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
- default y
- help
- This options allows you to remove unnecessary b43 firmware files
- from the final rootfs image. This can reduce the rootfs size by
- up to 200k.
-
- If unsure, say Y.
-
-config B43_FW_SQUASH_COREREVS
- string "Core revisions to include"
- depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
- default "5,6,7,8,9,10,13,14,15"
- help
- This is a comma seperated list of core revision numbers.
- Example (keep files for rev5 only):
- 5
- Example (keep files for rev5 and rev11):
- 5,11
-
-config B43_FW_SQUASH_PHYTYPES
- string "PHY types to include"
- depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
- default "G,LP"
- help
- This is a comma seperated list of PHY types:
- A => A-PHY
- AG => Dual A-PHY G-PHY
- G => G-PHY
- LP => LP-PHY
- N => N-PHY
-
- Example (keep files for G-PHY only):
- G
- Example (keep files for G-PHY and N-PHY):
- G,N
-
diff --git a/package/mac80211/Config.in.b43legacy b/package/mac80211/Config.in.b43legacy
deleted file mode 100644
index 2e2f06e..0000000
--- a/package/mac80211/Config.in.b43legacy
+++ /dev/null
@@ -1,24 +0,0 @@
-# B43 configuration
-
-config B43LEGACY_FW_SQUASH
- bool "Remove unnecessary firmware files"
- depends on PACKAGE_kmod-b43legacy
- default y
- help
- This options allows you to remove unnecessary b43legacy firmware files
- from the final rootfs image. This can reduce the rootfs size by
- up to 50k.
-
- If unsure, say Y.
-
-config B43LEGACY_FW_SQUASH_COREREVS
- string "Core revisions to include"
- depends on PACKAGE_kmod-b43legacy && B43LEGACY_FW_SQUASH
- default "1,2,3,4"
- help
- This is a comma seperated list of core revision numbers.
- Example (keep files for rev4 only):
- 4
- Example (keep files for rev2 and rev4):
- 2,4
-
diff --git a/package/mac80211/Config.in.rt2x00 b/package/mac80211/Config.in.rt2x00
deleted file mode 100644
index f985514..0000000
--- a/package/mac80211/Config.in.rt2x00
+++ /dev/null
@@ -1,15 +0,0 @@
-# rt2x00 configuration
-
-config PACKAGE_RT2X00_LIB_DEBUGFS
- bool "Enable rt2x00 debugfs support"
- depends PACKAGE_kmod-rt2x00-lib && PACKAGE_MAC80211_DEBUGFS
- ---help---
- Enable creation of debugfs files for the rt2x00 drivers.
- These debugfs files support both reading and writing of the
- most important register types of the rt2x00 hardware.
-
-config PACKAGE_RT2X00_DEBUG
- bool "Enable rt2x00 debug output"
- depends PACKAGE_kmod-rt2x00-lib
- ---help---
- Enable debugging output for all rt2x00 modules
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index 29b8556..d586e05 100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -66,10 +66,23 @@ define KernelPackage/mac80211
DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211
FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,21,mac80211)
+ MENU:=1
endef
define KernelPackage/mac80211/config
- source "$(SOURCE)/Config.in"
+ menu "Configuration"
+ depends on PACKAGE_kmod-mac80211
+
+ config PACKAGE_MAC80211_DEBUGFS
+ bool "Export mac80211 internals in DebugFS"
+ default y
+ help
+ Select this to see extensive information about
+ the internal state of mac80211 in debugfs.
+
+ Say N unless you know you need this.
+
+ endmenu
endef
define KernelPackage/mac80211/description
@@ -186,10 +199,27 @@ $(call KernelPackage/rt2x00/Default)
TITLE+= (LIB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,rt2x00lib)
+ MENU:=1
endef
define KernelPackage/rt2x00-lib/config
- source "$(SOURCE)/Config.in.rt2x00"
+ menu "Configuration"
+ depends PACKAGE_kmod-rt2x00-lib
+
+ config PACKAGE_RT2X00_LIB_DEBUGFS
+ bool "Enable rt2x00 debugfs support"
+ depends PACKAGE_MAC80211_DEBUGFS
+ help
+ Enable creation of debugfs files for the rt2x00 drivers.
+ These debugfs files support both reading and writing of the
+ most important register types of the rt2x00 hardware.
+
+ config PACKAGE_RT2X00_DEBUG
+ bool "Enable rt2x00 debug output"
+ help
+ Enable debugging output for all rt2x00 modules
+
+ endmenu
endef
define KernelPackage/rt2x00-pci
@@ -321,24 +351,27 @@ define KernelPackage/zd1211rw
endef
define KernelPackage/ath/config
+ menu "Configuration"
+ depends on PACKAGE_kmod-ath
+
+ config ATH_USER_REGD
+ bool "Force Atheros drivers to respect the user's regdomain settings"
+ help
+ Atheros' idea of regulatory handling is that the EEPROM of the card defines
+ the regulatory limits and the user is only allowed to restrict the settings
+ even further, even if the country allows frequencies or power levels that
+ are forbidden by the EEPROM settings.
+
+ Select this option if you want the driver to respect the user's decision about
+ regulatory settings.
-config ATH_USER_REGD
- bool "Force Atheros drivers to respect the user's regdomain settings"
- depends on PACKAGE_kmod-ath
- help
- Atheros' idea of regulatory handling is that the EEPROM of the card defines
- the regulatory limits and the user is only allowed to restrict the settings
- even further, even if the country allows frequencies or power levels that
- are forbidden by the EEPROM settings.
- Select this option if you want the driver to respect the user's decision about
- regulatory settings.
-
-config PACKAGE_ATH_DEBUG
- bool "Atheros wireless debugging"
- depends on PACKAGE_kmod-ath
- help
- Say Y, if you want to debug atheros wireless drivers.
- Right now only ath9k makes use of this.
+ config PACKAGE_ATH_DEBUG
+ bool "Atheros wireless debugging"
+ help
+ Say Y, if you want to debug atheros wireless drivers.
+ Right now only ath9k makes use of this.
+
+ endmenu
endef
define KernelPackage/ath
@@ -347,6 +380,7 @@ define KernelPackage/ath
DEPENDS+= @PCI_SUPPORT +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,26,ath)
+ MENU:=1
endef
define KernelPackage/ath/description
@@ -377,6 +411,7 @@ define KernelPackage/ath9k
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common ath9k)
+ MENU:=1
endef
define KernelPackage/ath9k/description
@@ -385,7 +420,24 @@ Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
endef
define KernelPackage/ath9k/config
- source "$(SOURCE)/Config.in.ath9k"
+ menu "Configuration"
+ depends PACKAGE_kmod-ath9k
+
+ config PACKAGE_ATH9K_DEBUG
+ bool "ath9k debugging"
+ depends KERNEL_DEBUG_FS
+ help
+ Say Y, if you need ath9k to display debug messages.
+ Pass the debug mask as a module parameter:
+
+ modprobe ath9k debug=0x00002000
+
+ Look in ath9k/core.h for possible debug masks
+
+ config PACKAGE_ATH9K_USE_MINSTREL
+ bool "use the new minstrel_ht rate control for ath9k"
+
+ endmenu
endef
USB8388FW_NAME:=usb8388
@@ -579,10 +631,93 @@ $(call KernelPackage/b43-common)
TITLE:=Broadcom 43xx wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,b43)
+ MENU:=1
endef
define KernelPackage/b43/config
- source "$(SOURCE)/Config.in.b43"
+ menu "Configuration"
+ depends on PACKAGE_kmod-b43
+
+ choice
+ prompt "b43 firmware version"
+ default B43_EXPERIMENTAL
+ help
+ This option allows you to select the version of the b43 firmware.
+
+ config B43_STABLE
+ bool "4.150.10.5 (stable)"
+ help
+ Stable firmware for BCM43xx devices.
+
+ If unsure, select this.
+
+ config B43_EXPERIMENTAL
+ bool "4.178.10.4 (experimental)"
+ help
+ Experimental firmware for BCM43xx devices.
+
+ This firmware is not tested as much as the "stable" firmware.
+
+ If unsure, select the "stable" firmware.
+
+ config B43_OPENFIRMWARE
+ bool "Open FirmWare for WiFi networks"
+ help
+ Opensource firmware for BCM43xx devices.
+
+ Do _not_ select this, unless you know what you are doing.
+ The Opensource firmware is not suitable for embedded devices, yet.
+ It does not support QoS, which is bad for AccessPoints.
+ It does not support hardware crypto acceleration, which is a showstopper
+ for embedded devices with low CPU resources.
+
+ If unsure, select the "stable" firmware.
+
+ endchoice
+
+ config B43_FW_SQUASH
+ bool "Remove unnecessary firmware files"
+ depends on !B43_OPENFIRMWARE
+ default y
+ help
+ This options allows you to remove unnecessary b43 firmware files
+ from the final rootfs image. This can reduce the rootfs size by
+ up to 200k.
+
+ If unsure, say Y.
+
+ config B43_FW_SQUASH_COREREVS
+ string "Core revisions to include"
+ depends on B43_FW_SQUASH
+ default "5,6,7,8,9,10,13,14,15"
+ help
+ This is a comma seperated list of core revision numbers.
+
+ Example (keep files for rev5 only):
+ 5
+
+ Example (keep files for rev5 and rev11):
+ 5,11
+
+ config B43_FW_SQUASH_PHYTYPES
+ string "PHY types to include"
+ depends on B43_FW_SQUASH
+ default "G,LP"
+ help
+ This is a comma seperated list of PHY types:
+ A => A-PHY
+ AG => Dual A-PHY G-PHY
+ G => G-PHY
+ LP => LP-PHY
+ N => N-PHY
+
+ Example (keep files for G-PHY only):
+ G
+
+ Example (keep files for G-PHY and N-PHY):
+ G,N
+
+ endmenu
endef
define KernelPackage/b43/description
@@ -594,10 +729,37 @@ $(call KernelPackage/b43-common)
TITLE:=Broadcom 43xx-legacy wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,b43legacy)
+ MENU:=1
endef
define KernelPackage/b43legacy/config
- source "$(SOURCE)/Config.in.b43legacy"
+ menu "Configuration"
+ depends on PACKAGE_kmod-b43legacy
+
+ config B43LEGACY_FW_SQUASH
+ bool "Remove unnecessary firmware files"
+ default y
+ help
+ This options allows you to remove unnecessary b43legacy firmware files
+ from the final rootfs image. This can reduce the rootfs size by
+ up to 50k.
+
+ If unsure, say Y.
+
+ config B43LEGACY_FW_SQUASH_COREREVS
+ string "Core revisions to include"
+ depends on B43LEGACY_FW_SQUASH
+ default "1,2,3,4"
+ help
+ This is a comma seperated list of core revision numbers.
+
+ Example (keep files for rev4 only):
+ 4
+
+ Example (keep files for rev2 and rev4):
+ 2,4
+
+ endmenu
endef
define KernelPackage/b43legacy/description