diff options
14 files changed, 141 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index b167c52..26f0d1f 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -69,6 +69,9 @@ get_status_led() { rt-n56u) status_led="asus:blue:power" ;; + sl-r7205) + status_led="sl-r7205:green:status" + ;; v11st-fe) status_led="v11st-fe:green:status" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 6d90c25..eb756a5 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -60,6 +60,7 @@ case "$FIRMWARE" in omni-emb | \ rt-n15 | \ rt-n56u | \ + sl-r7205 | \ v11st-fe | \ v22rw-2x2 | \ w502u | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index 891a1a7..d8f3c0c 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -60,6 +60,9 @@ case $board in nw718) set_usb_led "nw718:amber:usb" ;; + sl-r7205) + set_wifi_led "rt2800pci-phy0::radio" + ;; v11st-fe) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index a36341c..2b8c1ab 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -23,6 +23,7 @@ ramips_setup_interfaces() argus-atp52b | \ b2c | \ nw718 | \ + sl-r7205 | \ w502u | \ wr6202) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" @@ -99,6 +100,7 @@ ramips_setup_macs() f5d8235-v1 | \ nw718 | \ rt-n15 | \ + sl-r7205 | \ wl-351) lan_mac=$(ramips_get_mac_binary factory 4) wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1) diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 9f5c024..66eb6b9 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -9,9 +9,10 @@ preinit_set_mac_address() { case $(ramips_board_name) in bc2 |\ + esr-9753 |\ nw718 |\ rt-n56u |\ - esr-9753) + sl-r7205) mac=$(ramips_get_mac_binary factory 4) mac=$(maccalc or "$mac" "02:00:00:00:00:00") ifconfig eth0 hw ether $mac 2>/dev/null diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 07bdf16..728f525 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -104,6 +104,9 @@ ramips_board_name() { *"RT-N56U") name="rt-n56u" ;; + *"Skyline SL-R7205"*) + name="sl-r7205" + ;; *"Sparklan WCR-150GN") name="wcr-150gn" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 2bcfa4b..a2f3513 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -29,6 +29,7 @@ platform_check_image() { rt-g32-b1 | \ rt-n15 | \ rt-n56u | \ + sl-r7205 | \ w502u |\ wr6202 |\ v22rw-2x2 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index d6c9911..ac7aac4 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -39,6 +39,7 @@ enum ramips_mach_type { RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ + RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ RAMIPS_MACH_W502U, /* ALFA Networks W502U */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 550287e..1644832 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -101,6 +101,11 @@ config RT305X_MACH_WL351 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_SL_R7205 + bool "Skyline SL-R7205 Wireless 3G Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WCR150GN bool "Sparklan WCR-150GN support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index da1952c..c8b0289 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o +obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c new file mode 100644 index 0000000..9bb429f --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c @@ -0,0 +1,112 @@ +/* + * Skyline SL-R7205 Wireless 3G Router support + * + * Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define SL_R7205_GPIO_BUTTON_WPS 0 +#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */ + +#define SL_R7205_GPIO_LED_WIFI 7 + +#define SL_R7205_KEYS_POLL_INTERVAL 20 +#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL) + +static struct mtd_partition sl_r7205_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0a0000, + }, { + .name = "rootfs", + .offset = 0x150000, + .size = 0x2b0000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3b0000, + } +}; + +static struct gpio_led sl_r7205_leds_gpio[] __initdata = { + { + .name = "sl-r7205:green:wifi", + .gpio = SL_R7205_GPIO_LED_WIFI, + .active_low = 1, + } +}; + +static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init sl_r7205_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_flash0_data.nr_parts = ARRAY_SIZE(sl_r7205_partitions); + rt305x_flash0_data.parts = sl_r7205_partitions; + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio), + sl_r7205_leds_gpio); + ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL, + ARRAY_SIZE(sl_r7205_gpio_buttons), + sl_r7205_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205", + "Skyline SL-R7205 Wireless 3G Router", + sl_r7205_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 347bafd..588dfa5 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -313,6 +313,10 @@ define Image/Build/Profile/WR5123GN $(call Image/Build/Template/GENERIC_8M,$(1),wr512-3gn-8M,WR512-3GN) endef +define Image/Build/Profile/SLR7205 + $(call Image/Build/Template/GENERIC_4M,$(1),sl-r7205,SL-R7205) +endef + ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) @@ -327,6 +331,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/NW718,$(1)) $(call Image/Build/Profile/OMNIEMB,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) + $(call Image/Build/Profile/SLR7205,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/F5D8235V2,$(1)) diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index ab2bac9..58b4466 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_NW718=y CONFIG_RT305X_MACH_OMNI_EMB=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y +CONFIG_RT305X_MACH_SL_R7205=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_W502U=y CONFIG_RT305X_MACH_WCR150GN=y diff --git a/target/linux/ramips/rt305x/config-3.2 b/target/linux/ramips/rt305x/config-3.2 index 69989c8..04706b4 100644 --- a/target/linux/ramips/rt305x/config-3.2 +++ b/target/linux/ramips/rt305x/config-3.2 @@ -106,6 +106,7 @@ CONFIG_RT305X_MACH_NW718=y CONFIG_RT305X_MACH_OMNI_EMB=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y +CONFIG_RT305X_MACH_SL_R7205=y CONFIG_RT305X_MACH_V22RW_2X2=y CONFIG_RT305X_MACH_W502U=y CONFIG_RT305X_MACH_WCR150GN=y |