diff options
| -rw-r--r-- | target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h | 104 | ||||
| -rw-r--r-- | target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h | 57 |
2 files changed, 161 insertions, 0 deletions
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h new file mode 100644 index 0000000..1e2b973 --- /dev/null +++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/routerboot.h @@ -0,0 +1,104 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h new file mode 100644 index 0000000..aa2e555 --- /dev/null +++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/zynos.h @@ -0,0 +1,57 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "D-Link" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +#endif /* _ZYNOS_H */ |