diff options
15 files changed, 428 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f30ad05..a3d5075 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -57,6 +57,9 @@ get_status_led() { dir-615-c1) status_led="dir-615c1:green:status" ;; + dir-615-e4) + status_led="dir-615-e4:green:power" + ;; dir-825-b1) status_led="dir825b1:orange:power" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index d961393..c33510a 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -118,6 +118,14 @@ rb750) set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" ;; +dir-615-e4) + set_led_netdev "wan" "WAN" "dir-615-e4:green:wan" "eth1" + set_led_switch "lan1" "LAN1" "dir-615-e4:green:lan1" "switch0" "0x02" + set_led_switch "lan2" "LAN2" "dir-615-e4:green:lan2" "switch0" "0x04" + set_led_switch "lan3" "LAN3" "dir-615-e4:green:lan3" "switch0" "0x08" + set_led_switch "lan4" "LAN4" "dir-615-e4:green:lan4" "switch0" "0x10" + ;; + dir-825-b1) set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index ca99898..613b2a0 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -137,6 +137,7 @@ ap96 |\ airrouter |\ dir-600-a1 |\ dir-615-c1 |\ +dir-615-e4 |\ ja76pf |\ rb-750 |\ tew-632brp |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 9f11722..82b53f1 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -166,6 +166,9 @@ ar71xx_board_detect() { *"DIR-600 rev. A1") name="dir-600-a1" ;; + *"DIR-615 rev. E4") + name="dir-615-e4" + ;; *"DIR-825 rev. B1") name="dir-825-b1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 49df3c3..3adfcd5 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -97,6 +97,7 @@ platform_check_image() { ap83 | \ dir-600-a1 | \ dir-615-c1 | \ + dir-615-e4 | \ dir-825-b1 | \ mzk-w04nu | \ mzk-w300nh | \ diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39 index 4f51b1a..b8a91b5 100644 --- a/target/linux/ar71xx/config-2.6.39 +++ b/target/linux/ar71xx/config-2.6.39 @@ -25,6 +25,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DB120=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y +CONFIG_AR71XX_MACH_DIR_615_E4=y CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_EAP7660D=y CONFIG_AR71XX_MACH_HORNET_UB=y diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2 index 50fe18f..c3bcc76 100644 --- a/target/linux/ar71xx/config-3.2 +++ b/target/linux/ar71xx/config-3.2 @@ -34,6 +34,7 @@ CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y +CONFIG_ATH79_MACH_DIR_615_E4=y CONFIG_ATH79_MACH_DIR_825_B1=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_HORNET_UB=y diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig index 60db3ef..14982b1 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig @@ -104,6 +104,15 @@ config AR71XX_MACH_DIR_615_C1 select AR71XX_DEV_LEDS_GPIO select AR71XX_NVRAM +config AR71XX_MACH_DIR_615_E4 + bool "D-Link DIR-615 rev. E4 support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_NVRAM + config AR71XX_MACH_DIR_825_B1 bool "D-Link DIR-825 rev. B1 board support" select SOC_AR71XX diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile index 22e32e5..546ff34 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o +obj-$(CONFIG_AR71XX_MACH_DIR_615_E4) += mach-dir-615-e4.o obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c new file mode 100644 index 0000000..943929a --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c @@ -0,0 +1,183 @@ +/* + * D-Link DIR-615 rev. E4 board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "nvram.h" + +#define DIR_615_E4_GPIO_LED_WPS 0 +#define DIR_615_E4_GPIO_LED_POWER_AMBER 1 +#define DIR_615_E4_GPIO_LED_POWER_GREEN 6 +#define DIR_615_E4_GPIO_LED_WAN_AMBER 7 +#define DIR_615_E4_GPIO_LED_WAN_GREEN 17 +#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13 +#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14 +#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15 +#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16 + +#define DIR_615_E4_GPIO_BTN_RESET 8 +#define DIR_615_E4_GPIO_BTN_WPS 12 + +#define DIR_615_E4_KEYS_POLL_INTERVAL 20 +#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL) + +#define DIR_615_E4_NVRAM_ADDR 0x1f030000 +#define DIR_615_E4_NVRAM_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir_615_e4_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir_615_e4_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir_615_e4_partitions, + .nr_parts = ARRAY_SIZE(dir_615_e4_partitions), +#endif +}; + + +static struct gpio_led dir_615_e4_leds_gpio[] __initdata = { + { + .name = "dir-615-e4:green:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-615-e4:amber:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-615-e4:green:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:amber:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER, + }, { + .name = "dir-615-e4:green:lan1", + .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan2", + .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan3", + .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan4", + .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:blue:wps", + .gpio = DIR_615_E4_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_615_e4_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ar71xx_add_device_m25p80(&dir_615_e4_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio), + dir_615_e4_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_e4_gpio_keys), + dir_615_e4_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_setup_wmac_led_pin(1); + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", + dir_615_e4_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h index 452055d..82fc944 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h @@ -29,6 +29,7 @@ enum ar71xx_mach_type { AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + AR71XX_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c new file mode 100644 index 0000000..cce5dce --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c @@ -0,0 +1,179 @@ +/* + * D-Link DIR-615 rev. E4 board support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach-ath79/ath79.h> + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "nvram.h" + +#define DIR_615_E4_GPIO_LED_WPS 0 +#define DIR_615_E4_GPIO_LED_POWER_AMBER 1 +#define DIR_615_E4_GPIO_LED_POWER_GREEN 6 +#define DIR_615_E4_GPIO_LED_WAN_AMBER 7 +#define DIR_615_E4_GPIO_LED_WAN_GREEN 17 +#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13 +#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14 +#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15 +#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16 + +#define DIR_615_E4_GPIO_BTN_RESET 8 +#define DIR_615_E4_GPIO_BTN_WPS 12 + +#define DIR_615_E4_KEYS_POLL_INTERVAL 20 +#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL) + +#define DIR_615_E4_NVRAM_ADDR 0x1f030000 +#define DIR_615_E4_NVRAM_SIZE 0x10000 + +static struct mtd_partition dir_615_e4_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; + +static struct flash_platform_data dir_615_e4_flash_data = { + .parts = dir_615_e4_partitions, + .nr_parts = ARRAY_SIZE(dir_615_e4_partitions), +}; + + +static struct gpio_led dir_615_e4_leds_gpio[] __initdata = { + { + .name = "dir-615-e4:green:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-615-e4:amber:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-615-e4:green:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:amber:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER, + }, { + .name = "dir-615-e4:green:lan1", + .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan2", + .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan3", + .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan4", + .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:blue:wps", + .gpio = DIR_615_E4_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_615_e4_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (ath79_nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ath79_register_m25p80(&dir_615_e4_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio), + dir_615_e4_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_e4_gpio_keys), + dir_615_e4_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + ap9x_pci_setup_wmac_led_pin(0, 1); + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", + dir_615_e4_setup); diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk index ec79dde..3068c4f 100644 --- a/target/linux/ar71xx/generic/profiles/d-link.mk +++ b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -29,6 +29,18 @@ endef $(eval $(call Profile,DIR615C1)) +define Profile/DIR615E4 + NAME:=D-Link DIR-615 rev. E4 + PACKAGES:= +endef + +define Profile/DIR615E4/Description + Package set optimized for the D-Link DIR-615 rev. E4. +endef + +$(eval $(call Profile,DIR615E4)) + + define Profile/DIR825B1 NAME:=D-Link DIR-825 rev. B1 PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index bd5e945..19e26ad 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -698,6 +698,11 @@ define Image/Build/Profile/DIR600A1 $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,$(dir600a1_cmdline),"AP91-AR7240-RT-090223-00") endef +dir615e4_cmdline=board=DIR-615-E4 console=ttyS0,115200 +define Image/Build/Profile/DIR615E4 + $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-615-e4,$(dir615e4_cmdline),"AP99-AR7240-RT-091105-05") +endef + eap7660d_cmdline=board=EAP7660D console=ttyS0,115200 define Image/Build/Profile/EAP7660D $(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,$(eap7660d_cmdline)) @@ -995,6 +1000,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DB120,$(1)) $(call Image/Build/Profile/DIR600A1,$(1)) $(call Image/Build/Profile/DIR615C1,$(1)) + $(call Image/Build/Profile/DIR615E4,$(1)) $(call Image/Build/Profile/DIR825B1,$(1)) $(call Image/Build/Profile/EAP7660D,$(1)) $(call Image/Build/Profile/FR54RTR,$(1)) diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch index d5204cb..e6542a1 100644 --- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,17 +16,80 @@ +@@ -16,17 +16,81 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -18,6 +18,7 @@ ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ + ATH79_MACH_JA76PF, /* jjPlus JA76PF */ @@ -187,7 +188,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -54,6 +137,369 @@ config ATH79_MACH_PB44 +@@ -54,6 +137,379 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -296,6 +297,16 @@ + select ATH79_DEV_WMAC + select ATH79_NVRAM + ++config ATH79_MACH_DIR_615_E4 ++ bool "D-Link DIR-615 rev. E4 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_NVRAM ++ +config ATH79_MACH_DIR_825_B1 + bool "D-Link DIR-825 rev. B1 board support" + select SOC_AR71XX @@ -557,7 +568,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM (rev 1.0) board" select SOC_AR724X -@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM +@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -582,7 +593,7 @@ endmenu config SOC_AR71XX -@@ -96,10 +560,6 @@ config SOC_AR934X +@@ -96,10 +570,6 @@ config SOC_AR934X select PCI_AR724X if PCI def_bool n @@ -593,7 +604,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -110,7 +570,14 @@ config ATH79_DEV_DSA +@@ -110,7 +580,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -609,7 +620,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -135,4 +602,7 @@ config ATH79_NVRAM +@@ -135,4 +612,7 @@ config ATH79_NVRAM config ATH79_PCI_ATH9K_FIXUP def_bool n @@ -619,7 +630,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p +@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p # # Machines # @@ -635,6 +646,7 @@ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o +obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o +obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o |