diff options
| -rw-r--r-- | target/linux/mpc83xx/Makefile | 6 | ||||
| -rw-r--r-- | target/linux/mpc83xx/config-default | 63 | ||||
| -rw-r--r-- | target/linux/mpc83xx/image/Makefile | 14 | ||||
| -rw-r--r-- | target/linux/mpc83xx/patches/001-rb600.patch | 16 | ||||
| -rw-r--r-- | target/linux/mpc83xx/patches/002-mpc8377e-wlan_support.patch | 524 | ||||
| -rw-r--r-- | target/linux/mpc83xx/patches/003-esdhc_wp-inverted_property.patch | 113 | ||||
| -rw-r--r-- | target/linux/mpc83xx/patches/004-mpc8377e-wlan_u-boot_size_fix.patch | 24 |
7 files changed, 713 insertions, 47 deletions
diff --git a/target/linux/mpc83xx/Makefile b/target/linux/mpc83xx/Makefile index 96b379f..1bbfa76 100644 --- a/target/linux/mpc83xx/Makefile +++ b/target/linux/mpc83xx/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2007-2009 OpenWrt.org +# Copyright (C) 2007-2010 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,9 +9,9 @@ include $(TOPDIR)/rules.mk ARCH:=powerpc BOARD:=mpc83xx BOARDNAME:=Freescale MPC83xx -FEATURES:=tgz broken +FEATURES:=squashfs tgz broken -LINUX_VERSION:=2.6.30.10 +LINUX_VERSION:=2.6.31.11 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/mpc83xx/config-default b/target/linux/mpc83xx/config-default index b1cf4fe..955ad9a 100644 --- a/target/linux/mpc83xx/config-default +++ b/target/linux/mpc83xx/config-default @@ -21,21 +21,15 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_ASP834x is not set CONFIG_ATA=y +# CONFIG_ATA_PIIX is not set CONFIG_AUDIT_ARCH=y -# CONFIG_BINARY_PRINTF is not set CONFIG_BITREVERSE=y # CONFIG_BOOTX_TEXT is not set CONFIG_BOUNCE=y # CONFIG_BRIQ_PANEL is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CMDLINE_BOOL=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DEFAULT_UIMAGE=y CONFIG_DEVPORT=y @@ -50,13 +44,16 @@ CONFIG_FSL_PCI=y CONFIG_FSL_PQ_MDIO=y CONFIG_FSL_SOC=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_FSNOTIFY is not set +CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_GENERIC_IOMAP is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_NVRAM=y @@ -83,26 +80,27 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_HAVE_LMB=y -CONFIG_HAVE_MLOCK=y CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_COUNTERS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set # CONFIG_HVC_RTAS is not set -# CONFIG_HVC_UDBG is not set CONFIG_HW_RANDOM=y -# CONFIG_HZ_100 is not set CONFIG_HZ=250 +# CONFIG_HZ_100 is not set CONFIG_HZ_250=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_IOMMU_HELPER is not set CONFIG_IPIC=y -CONFIG_IRQ_PER_CPU=y # CONFIG_IRQSTACKS is not set -CONFIG_ISA_DMA_API=y +CONFIG_IRQ_PER_CPU=y # CONFIG_ISA is not set +CONFIG_ISA_DMA_API=y # CONFIG_JFFS2_FS is not set CONFIG_KERNEL_START=0xc0000000 +# CONFIG_KMETER1 is not set # CONFIG_LEDS_GPIO is not set CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_MACINTOSH_DRIVERS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_MPC5121_ADS is not set @@ -115,34 +113,37 @@ CONFIG_LOWMEM_SIZE=0x30000000 # CONFIG_MPC836x_MDS is not set # CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set -# CONFIG_MPC837x_RDB is not set +CONFIG_MPC837x_RDB=y # CONFIG_MPC8xxx_GPIO is not set -# CONFIG_MPIC_WEIRD is not set CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_MTD_CFI is not set +CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_NAND_FSL_UPM is not set CONFIG_MTD_NAND_RB_PPC=y -CONFIG_MTD_NAND=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MV643XX_ETH is not set +CONFIG_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y -CONFIG_OF=y +CONFIG_OF_MDIO=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_PATA_RB_PPC=m +CONFIG_PCIEAER=y +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIE_ECRC is not set CONFIG_PCI_DISABLE_COMMON_QUIRKS=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCIEPORTBUS is not set CONFIG_PCSPKR_PLATFORM=y +# CONFIG_PERF_COUNTERS is not set CONFIG_PHYLIB=y CONFIG_PHYSICAL_START=0x00000000 -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_256K_PAGES is not set +CONFIG_PPC=y CONFIG_PPC32=y -CONFIG_PPC_4K_PAGES=y # CONFIG_PPC64 is not set -# CONFIG_PPC_64K_PAGES is not set # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set @@ -150,14 +151,17 @@ CONFIG_PPC_83xx=y # CONFIG_PPC_8xx is not set # CONFIG_PPC_970_NAP is not set CONFIG_PPC_BOOK3S=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set -CONFIG_PPC_CHRP=y +# CONFIG_PPC_CHRP is not set # CONFIG_PPC_CLOCK is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_DCR_NATIVE is not set +CONFIG_PPC_DISABLE_WERROR=y # CONFIG_PPC_EARLY_DEBUG is not set CONFIG_PPC_FPU=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set CONFIG_PPC_INDIRECT_PCI=y @@ -166,16 +170,17 @@ CONFIG_PPC_LIB_RHEAP=y CONFIG_PPC_MPC106=y # CONFIG_PPC_MPC52xx is not set CONFIG_PPC_MPC834x=y +CONFIG_PPC_MPC837x=y CONFIG_PPC_NATIVE=y -CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_PPC_OF=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_PPC_PCI_CHOICE=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_RTAS=y -CONFIG_PPC_STD_MMU_32=y CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y CONFIG_PPC_UDBG_16550=y -CONFIG_PPC=y +CONFIG_PPC_WERROR=y # CONFIG_PQ2ADS is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_PROC_DEVICETREE=y @@ -198,12 +203,10 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_QE is not set -# CONFIG_SIMPLE_GPIO is not set -# CONFIG_SLOW_WORK is not set # CONFIG_SQUASHFS is not set +# CONFIG_SWIOTLB is not set CONFIG_TASK_SIZE=0xc0000000 # CONFIG_TAU is not set -CONFIG_TRACING_SUPPORT=y # CONFIG_UCC_GETH is not set # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_WATCHDOG_RTAS is not set diff --git a/target/linux/mpc83xx/image/Makefile b/target/linux/mpc83xx/image/Makefile index 1483786..8004f74 100644 --- a/target/linux/mpc83xx/image/Makefile +++ b/target/linux/mpc83xx/image/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2009 OpenWrt.org +# Copyright (C) 2009-2010 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,6 +9,7 @@ include $(INCLUDE_DIR)/image.mk define Image/Prepare + $(LINUX_DIR)/scripts/dtc/dtc -O dtb -R 4 -S 0x20000 $(LINUX_DIR)/arch/powerpc/boot/dts/mpc8377_wlan.dts > $(KDIR)/openwrt-mpc8377_wlan.dtb endef define Image/BuildKernel @@ -21,11 +22,12 @@ endef define Image/Build/squashfs $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) - ( \ - dd if=$(LINUX_DIR)/arch/powerpc/boot/uImage bs=1920k conv=sync; \ - dd if=$(KDIR)/openwrt-canyonlands.dtb bs=128k conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ - ) > $(BIN_DIR)/openwrt-$(BOARD)-canyonlands-$(1).img +# We'll do FIT here +# ( \ +# dd if=$(LINUX_DIR)/arch/powerpc/boot/uImage bs=1920k conv=sync; \ +# dd if=$(KDIR)/openwrt-mpc8377_wlan.dtb bs=128k conv=sync; \ +# dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ +# ) > $(BIN_DIR)/openwrt-$(BOARD)-mpc8377_wlan-$(1).img endef $(eval $(call BuildImage)) diff --git a/target/linux/mpc83xx/patches/001-rb600.patch b/target/linux/mpc83xx/patches/001-rb600.patch index 2337230..98db9e2 100644 --- a/target/linux/mpc83xx/patches/001-rb600.patch +++ b/target/linux/mpc83xx/patches/001-rb600.patch @@ -358,7 +358,7 @@ ;; --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile -@@ -97,9 +97,11 @@ obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += f +@@ -104,9 +104,11 @@ obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o @@ -369,7 +369,7 @@ +endif obj-$(CONFIG_PPC64) += $(obj64-y) - + obj-$(CONFIG_PPC32) += $(obj32-y) --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -30,6 +30,15 @@ config MPC832x_RDB @@ -732,7 +732,7 @@ menu "CPU Frequency drivers" --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile -@@ -50,3 +50,5 @@ obj-$(CONFIG_UCODE_PATCH) += micropatch. +@@ -56,3 +56,5 @@ obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clo ifeq ($(CONFIG_SUSPEND),y) obj-$(CONFIG_6xx) += 6xx-suspend.o endif @@ -966,7 +966,7 @@ +EXPORT_SYMBOL(localbus_unmap); --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig -@@ -734,5 +734,12 @@ config PATA_BF54X +@@ -751,5 +751,12 @@ config PATA_BF54X If unsure, say N. @@ -981,8 +981,8 @@ endif # ATA --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile -@@ -73,6 +73,7 @@ obj-$(CONFIG_PATA_OCTEON_CF) += pata_oct - obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +@@ -75,6 +75,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat + obj-$(CONFIG_PATA_AT91) += pata_at91.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o +obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o @@ -1695,7 +1695,7 @@ +module_exit(rbppc_exit); --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig -@@ -380,6 +380,13 @@ config MTD_NAND_PLATFORM +@@ -386,6 +386,13 @@ config MTD_NAND_PLATFORM devices. You will need to provide platform-specific functions via platform_data. @@ -1711,7 +1711,7 @@ depends on MTD_NAND && USB --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += +@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/target/linux/mpc83xx/patches/002-mpc8377e-wlan_support.patch b/target/linux/mpc83xx/patches/002-mpc8377e-wlan_support.patch new file mode 100644 index 0000000..68634bf --- /dev/null +++ b/target/linux/mpc83xx/patches/002-mpc8377e-wlan_support.patch @@ -0,0 +1,524 @@ +From fda4bd9bac78efd2f9d566c52956d297bc03e8d9 Mon Sep 17 00:00:00 2001 +From: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Sat, 25 Jul 2009 01:42:17 +0400 +Subject: [PATCH] powerpc/83xx: Add support for MPC8377E-WLAN boards + +MPC8377E-WLAN are basically RDB boards except: + +- RAM extended to 512 MB; +- NAND flash removed, NOR flash extended to 64 MB; +- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; +- Power management MCU removed; +- PCI slot removed, another mini-PCI slot added (IRQ routing changed); +- USB3300 PHY's ID pin grounded, thus USB port is host-only. + +Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> +Signed-off-by: Kumar Gala <galak@kernel.crashing.org> +Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> +--- + arch/powerpc/boot/dts/mpc8377_wlan.dts | 464 +++++++++++++++++++++++++++++ + arch/powerpc/platforms/83xx/Kconfig | 4 +- + arch/powerpc/platforms/83xx/mpc837x_rdb.c | 5 +- + 3 files changed, 469 insertions(+), 4 deletions(-) + create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts + +--- /dev/null ++++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts +@@ -0,0 +1,464 @@ ++/* ++ * MPC8377E WLAN Device Tree Source ++ * ++ * Copyright 2007-2009 Freescale Semiconductor Inc. ++ * Copyright 2009 MontaVista Software, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++/dts-v1/; ++ ++/ { ++ compatible = "fsl,mpc8377wlan"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ aliases { ++ ethernet0 = &enet0; ++ ethernet1 = &enet1; ++ serial0 = &serial0; ++ serial1 = &serial1; ++ pci0 = &pci0; ++ pci1 = &pci1; ++ pci2 = &pci2; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ PowerPC,8377@0 { ++ device_type = "cpu"; ++ reg = <0x0>; ++ d-cache-line-size = <32>; ++ i-cache-line-size = <32>; ++ d-cache-size = <32768>; ++ i-cache-size = <32768>; ++ timebase-frequency = <0>; ++ bus-frequency = <0>; ++ clock-frequency = <0>; ++ }; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x20000000>; // 512MB at 0 ++ }; ++ ++ localbus@e0005000 { ++ #address-cells = <2>; ++ #size-cells = <1>; ++ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; ++ reg = <0xe0005000 0x1000>; ++ interrupts = <77 0x8>; ++ interrupt-parent = <&ipic>; ++ ranges = <0x0 0x0 0xfc000000 0x04000000>; ++ ++ flash@0,0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "cfi-flash"; ++ reg = <0x0 0x0 0x4000000>; ++ bank-width = <2>; ++ device-width = <1>; ++ ++ partition@0 { ++ reg = <0 0x8000>; ++ label = "u-boot"; ++ read-only; ++ }; ++ ++ partition@a0000 { ++ reg = <0xa0000 0x300000>; ++ label = "kernel"; ++ }; ++ ++ partition@3a0000 { ++ reg = <0x3a0000 0x3c60000>; ++ label = "rootfs"; ++ }; ++ }; ++ }; ++ ++ immr@e0000000 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ device_type = "soc"; ++ compatible = "simple-bus"; ++ ranges = <0x0 0xe0000000 0x00100000>; ++ reg = <0xe0000000 0x00000200>; ++ bus-frequency = <0>; ++ ++ wdt@200 { ++ device_type = "watchdog"; ++ compatible = "mpc83xx_wdt"; ++ reg = <0x200 0x100>; ++ }; ++ ++ gpio1: gpio-controller@c00 { ++ #gpio-cells = <2>; ++ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; ++ reg = <0xc00 0x100>; ++ interrupts = <74 0x8>; ++ interrupt-parent = <&ipic>; ++ gpio-controller; ++ }; ++ ++ gpio2: gpio-controller@d00 { ++ #gpio-cells = <2>; ++ compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; ++ reg = <0xd00 0x100>; ++ interrupts = <75 0x8>; ++ interrupt-parent = <&ipic>; ++ gpio-controller; ++ }; ++ ++ sleep-nexus { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "simple-bus"; ++ sleep = <&pmc 0x0c000000>; ++ ranges; ++ ++ i2c@3000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ cell-index = <0>; ++ compatible = "fsl-i2c"; ++ reg = <0x3000 0x100>; ++ interrupts = <14 0x8>; ++ interrupt-parent = <&ipic>; ++ dfsrr; ++ ++ at24@50 { ++ compatible = "at24,24c256"; ++ reg = <0x50>; ++ }; ++ ++ rtc@68 { ++ compatible = "dallas,ds1339"; ++ reg = <0x68>; ++ }; ++ }; ++ ++ sdhci@2e000 { ++ compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; ++ reg = <0x2e000 0x1000>; ++ interrupts = <42 0x8>; ++ interrupt-parent = <&ipic>; ++ clock-frequency = <133333333>; ++ }; ++ }; ++ ++ i2c@3100 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ cell-index = <1>; ++ compatible = "fsl-i2c"; ++ reg = <0x3100 0x100>; ++ interrupts = <15 0x8>; ++ interrupt-parent = <&ipic>; ++ dfsrr; ++ }; ++ ++ spi@7000 { ++ cell-index = <0>; ++ compatible = "fsl,spi"; ++ reg = <0x7000 0x1000>; ++ interrupts = <16 0x8>; ++ interrupt-parent = <&ipic>; ++ mode = "cpu"; ++ }; ++ ++ dma@82a8 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; ++ reg = <0x82a8 4>; ++ ranges = <0 0x8100 0x1a8>; ++ interrupt-parent = <&ipic>; ++ interrupts = <71 8>; ++ cell-index = <0>; ++ dma-channel@0 { ++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; ++ reg = <0 0x80>; ++ cell-index = <0>; ++ interrupt-parent = <&ipic>; ++ interrupts = <71 8>; ++ }; ++ dma-channel@80 { ++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; ++ reg = <0x80 0x80>; ++ cell-index = <1>; ++ interrupt-parent = <&ipic>; ++ interrupts = <71 8>; ++ }; ++ dma-channel@100 { ++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; ++ reg = <0x100 0x80>; ++ cell-index = <2>; ++ interrupt-parent = <&ipic>; ++ interrupts = <71 8>; ++ }; ++ dma-channel@180 { ++ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; ++ reg = <0x180 0x28>; ++ cell-index = <3>; ++ interrupt-parent = <&ipic>; ++ interrupts = <71 8>; ++ }; ++ }; ++ ++ usb@23000 { ++ compatible = "fsl-usb2-dr"; ++ reg = <0x23000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ interrupt-parent = <&ipic>; ++ interrupts = <38 0x8>; ++ phy_type = "ulpi"; ++ sleep = <&pmc 0x00c00000>; ++ }; ++ ++ enet0: ethernet@24000 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ cell-index = <0>; ++ device_type = "network"; ++ model = "eTSEC"; ++ compatible = "gianfar"; ++ reg = <0x24000 0x1000>; ++ ranges = <0x0 0x24000 0x1000>; ++ local-mac-address = [ 00 00 00 00 00 00 ]; ++ interrupts = <32 0x8 33 0x8 34 0x8>; ++ phy-connection-type = "mii"; ++ interrupt-parent = <&ipic>; ++ tbi-handle = <&tbi0>; ++ phy-handle = <&phy2>; ++ sleep = <&pmc 0xc0000000>; ++ fsl,magic-packet; ++ ++ mdio@520 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,gianfar-mdio"; ++ reg = <0x520 0x20>; ++ ++ phy2: ethernet-phy@2 { ++ interrupt-parent = <&ipic>; ++ interrupts = <17 0x8>; ++ reg = <0x2>; ++ device_type = "ethernet-phy"; ++ }; ++ ++ phy3: ethernet-phy@3 { ++ interrupt-parent = <&ipic>; ++ interrupts = <18 0x8>; ++ reg = <0x3>; ++ device_type = "ethernet-phy"; ++ }; ++ ++ tbi0: tbi-phy@11 { ++ reg = <0x11>; ++ device_type = "tbi-phy"; ++ }; ++ }; ++ }; ++ ++ enet1: ethernet@25000 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ cell-index = <1>; ++ device_type = "network"; ++ model = "eTSEC"; ++ compatible = "gianfar"; ++ reg = <0x25000 0x1000>; ++ ranges = <0x0 0x25000 0x1000>; ++ local-mac-address = [ 00 00 00 00 00 00 ]; ++ interrupts = <35 0x8 36 0x8 37 0x8>; ++ phy-connection-type = "mii"; ++ interrupt-parent = <&ipic>; ++ phy-handle = <&phy3>; ++ tbi-handle = <&tbi1>; ++ sleep = <&pmc 0x30000000>; ++ fsl,magic-packet; ++ ++ mdio@520 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,gianfar-tbi"; ++ reg = <0x520 0x20>; ++ ++ tbi1: tbi-phy@11 { ++ reg = <0x11>; ++ device_type = "tbi-phy"; ++ }; ++ }; ++ }; ++ ++ serial0: serial@4500 { ++ cell-index = <0>; ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <0x4500 0x100>; ++ clock-frequency = <0>; ++ interrupts = <9 0x8>; ++ interrupt-parent = <&ipic>; ++ }; ++ ++ serial1: serial@4600 { ++ cell-index = <1>; ++ device_type = "serial"; ++ compatible = "ns16550"; ++ reg = <0x4600 0x100>; ++ clock-frequency = <0>; ++ interrupts = <10 0x8>; ++ interrupt-parent = <&ipic>; ++ }; ++ ++ crypto@30000 { ++ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", ++ "fsl,sec2.1", "fsl,sec2.0"; ++ reg = <0x30000 0x10000>; ++ interrupts = <11 0x8>; ++ interrupt-parent = <&ipic>; ++ fsl,num-channels = <4>; ++ fsl,channel-fifo-len = <24>; ++ fsl,exec-units-mask = <0x9fe>; ++ fsl,descriptor-types-mask = <0x3ab0ebf>; ++ sleep = <&pmc 0x03000000>; ++ }; ++ ++ sata@18000 { ++ compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; ++ reg = <0x18000 0x1000>; ++ interrupts = <44 0x8>; ++ interrupt-parent = <&ipic>; ++ sleep = <&pmc 0x000000c0>; ++ }; ++ ++ sata@19000 { ++ compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; ++ reg = <0x19000 0x1000>; ++ interrupts = <45 0x8>; ++ interrupt-parent = <&ipic>; ++ sleep = <&pmc 0x00000030>; ++ }; ++ ++ /* IPIC ++ * interrupts cell = <intr #, sense> ++ * sense values match linux IORESOURCE_IRQ_* defines: ++ * sense == 8: Level, low assertion ++ * sense == 2: Edge, high-to-low change ++ */ ++ ipic: interrupt-controller@700 { ++ compatible = "fsl,ipic"; ++ interrupt-controller; ++ #address-cells = <0>; ++ #interrupt-cells = <2>; ++ reg = <0x700 0x100>; ++ }; ++ ++ pmc: power@b00 { ++ compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; ++ reg = <0xb00 0x100 0xa00 0x100>; ++ interrupts = <80 0x8>; ++ interrupt-parent = <&ipic>; ++ }; ++ }; ++ ++ pci0: pci@e0008500 { ++ interrupt-map-mask = <0xf800 0 0 7>; ++ interrupt-map = < ++ /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ ++ ++ /* IDSEL AD14 IRQ6 inta */ ++ 0x7000 0x0 0x0 0x1 &ipic 22 0x8 ++ ++ /* IDSEL AD15 IRQ5 inta */ ++ 0x7800 0x0 0x0 0x1 &ipic 21 0x8>; ++ interrupt-parent = <&ipic>; ++ interrupts = <66 0x8>; ++ bus-range = <0 0>; ++ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ++ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 ++ 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; ++ sleep = <&pmc 0x00010000>; ++ clock-frequency = <66666666>; ++ #interrupt-cells = <1>; ++ #size-cells = <2>; ++ #address-cells = <3>; ++ reg = <0xe0008500 0x100 /* internal registers */ ++ 0xe0008300 0x8>; /* config space access registers */ ++ compatible = "fsl,mpc8349-pci"; ++ device_type = "pci"; ++ }; ++ ++ pci1: pcie@e0009000 { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; ++ reg = <0xe0009000 0x00001000>; ++ ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 ++ 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; ++ bus-range = <0 255>; ++ interrupt-map-mask = <0xf800 0 0 7>; ++ interrupt-map = <0 0 0 1 &ipic 1 8 ++ 0 0 0 2 &ipic 1 8 ++ 0 0 0 3 &ipic 1 8 ++ 0 0 0 4 &ipic 1 8>; ++ sleep = <&pmc 0x00300000>; ++ clock-frequency = <0>; ++ ++ pcie@0 { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ reg = <0 0 0 0 0>; ++ ranges = <0x02000000 0 0xa8000000 ++ 0x02000000 0 0xa8000000 ++ 0 0x10000000 ++ 0x01000000 0 0x00000000 ++ 0x01000000 0 0x00000000 ++ 0 0x00800000>; ++ }; ++ }; ++ ++ pci2: pcie@e000a000 { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ device_type = "pci"; ++ compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; ++ reg = <0xe000a000 0x00001000>; ++ ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 ++ 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; ++ bus-range = <0 255>; ++ interrupt-map-mask = <0xf800 0 0 7>; ++ interrupt-map = <0 0 0 1 &ipic 2 8 ++ 0 0 0 2 &ipic 2 8 ++ 0 0 0 3 &ipic 2 8 ++ 0 0 0 4 &ipic 2 8>; ++ sleep = <&pmc 0x000c0000>; ++ clock-frequency = <0>; ++ ++ pcie@0 { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ reg = <0 0 0 0 0>; ++ ranges = <0x02000000 0 0xc8000000 ++ 0x02000000 0 0xc8000000 ++ 0 0x10000000 ++ 0x01000000 0 0x00000000 ++ 0x01000000 0 0x00000000 ++ 0 0x00800000>; ++ }; ++ }; ++}; +--- a/arch/powerpc/platforms/83xx/Kconfig ++++ b/arch/powerpc/platforms/83xx/Kconfig +@@ -84,11 +84,11 @@ config MPC837x_MDS + This option enables support for the MPC837x MDS Processor Board. + + config MPC837x_RDB +- bool "Freescale MPC837x RDB" ++ bool "Freescale MPC837x RDB/WLAN" + select DEFAULT_UIMAGE + select PPC_MPC837x + help +- This option enables support for the MPC837x RDB Board. ++ This option enables support for the MPC837x RDB and WLAN Boards. + + config SBC834x + bool "Wind River SBC834x" +--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c ++++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c +@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void + + return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") || + of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") || +- of_flat_dt_is_compatible(root, "fsl,mpc8379rdb"); ++ of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") || ++ of_flat_dt_is_compatible(root, "fsl,mpc8377wlan"); + } + + define_machine(mpc837x_rdb) { +- .name = "MPC837x RDB", ++ .name = "MPC837x RDB/WLAN", + .probe = mpc837x_rdb_probe, + .setup_arch = mpc837x_rdb_setup_arch, + .init_IRQ = mpc837x_rdb_init_IRQ, diff --git a/target/linux/mpc83xx/patches/003-esdhc_wp-inverted_property.patch b/target/linux/mpc83xx/patches/003-esdhc_wp-inverted_property.patch new file mode 100644 index 0000000..50c199a --- /dev/null +++ b/target/linux/mpc83xx/patches/003-esdhc_wp-inverted_property.patch @@ -0,0 +1,113 @@ +From 50dfe70fe9e216cf356830194630f9a39e498d76 Mon Sep 17 00:00:00 2001 +From: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Tue, 22 Sep 2009 16:45:14 -0700 +Subject: [PATCH] powerpc: introduce and document sdhci,wp-inverted property for eSDHC + +eSDHC block in MPC837x SOCs reports inverted write-protect state, soon +sdhci-of driver will look for sdhci,wp-inverted properties to decide +whether apply a specific quirk. + +So, document the property and add it to device tree source files. + +Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> +Cc: Pierre Ossman <pierre@ossman.eu> +Cc: Kumar Gala <galak@kernel.crashing.org> +Cc: David Vrabel <david.vrabel@csr.com> +Cc: Ben Dooks <ben@fluff.org> +Cc: Sascha Hauer <s.hauer@pengutronix.de> +Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> +Cc: <linux-mmc@vger.kernel.org> +Signed-off-by: Andrew Morton <akpm@linux-foundation.org> +Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> +--- + Documentation/powerpc/dts-bindings/fsl/esdhc.txt | 2 ++ + arch/powerpc/boot/dts/mpc8377_mds.dts | 1 + + arch/powerpc/boot/dts/mpc8377_rdb.dts | 1 + + arch/powerpc/boot/dts/mpc8377_wlan.dts | 1 + + arch/powerpc/boot/dts/mpc8378_mds.dts | 1 + + arch/powerpc/boot/dts/mpc8378_rdb.dts | 1 + + arch/powerpc/boot/dts/mpc8379_mds.dts | 1 + + arch/powerpc/boot/dts/mpc8379_rdb.dts | 1 + + 8 files changed, 9 insertions(+), 0 deletions(-) + +--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt ++++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt +@@ -10,6 +10,8 @@ Required properties: + - interrupts : should contain eSDHC interrupt. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies eSDHC base clock frequency. ++ - sdhci,wp-inverted : (optional) specifies that eSDHC controller ++ reports inverted write-protect state; + - sdhci,1-bit-only : (optional) specifies that a controller can + only handle 1-bit data transfers. + +--- a/arch/powerpc/boot/dts/mpc8377_mds.dts ++++ b/arch/powerpc/boot/dts/mpc8377_mds.dts +@@ -159,6 +159,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; +--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts ++++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts +@@ -173,6 +173,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; +--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts ++++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts +@@ -150,6 +150,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + clock-frequency = <133333333>; + }; + }; +--- a/arch/powerpc/boot/dts/mpc8378_mds.dts ++++ b/arch/powerpc/boot/dts/mpc8378_mds.dts +@@ -159,6 +159,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; +--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts ++++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts +@@ -173,6 +173,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; +--- a/arch/powerpc/boot/dts/mpc8379_mds.dts ++++ b/arch/powerpc/boot/dts/mpc8379_mds.dts +@@ -157,6 +157,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; +--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts ++++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts +@@ -171,6 +171,7 @@ + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; ++ sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; diff --git a/target/linux/mpc83xx/patches/004-mpc8377e-wlan_u-boot_size_fix.patch b/target/linux/mpc83xx/patches/004-mpc8377e-wlan_u-boot_size_fix.patch new file mode 100644 index 0000000..8cf95f6 --- /dev/null +++ b/target/linux/mpc83xx/patches/004-mpc8377e-wlan_u-boot_size_fix.patch @@ -0,0 +1,24 @@ +From 850f785a1f8c8448db4d70983595b2b088cf60b7 Mon Sep 17 00:00:00 2001 +From: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Fri, 16 Oct 2009 20:47:22 +0400 +Subject: [PATCH] powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards + +u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). + +Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> +Signed-off-by: Kumar Gala <galak@kernel.crashing.org> +--- + arch/powerpc/boot/dts/mpc8377_wlan.dts | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts ++++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts +@@ -67,7 +67,7 @@ + device-width = <1>; + + partition@0 { +- reg = <0 0x8000>; ++ reg = <0 0x80000>; + label = "u-boot"; + read-only; + }; |