summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--target/linux/ramips/dts/MT7628.dts2
-rw-r--r--target/linux/ramips/dts/mt7621.dtsi2
-rw-r--r--target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch210
3 files changed, 120 insertions, 94 deletions
diff --git a/target/linux/ramips/dts/MT7628.dts b/target/linux/ramips/dts/MT7628.dts
index 80a75db..e4cc4ed 100644
--- a/target/linux/ramips/dts/MT7628.dts
+++ b/target/linux/ramips/dts/MT7628.dts
@@ -25,7 +25,7 @@
reg = <0 0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
- m25p,chunked-io = <1>;
+ m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index 8bea946..9ef5a38 100644
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -104,7 +104,7 @@
#size-cells = <1>;
reg = <0 0>;
spi-max-frequency = <10000000>;
- m25p,chunked-io;
+ m25p,chunked-io = <32>;
};
};
};
diff --git a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
index ce4c511..4031335 100644
--- a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
+++ b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch
@@ -4,13 +4,22 @@ Date: Sun, 27 Jul 2014 09:58:09 +0100
Subject: [PATCH 44/57] mtd: add chunked read io to m25p80
Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/mtd/devices/m25p80.c | 128 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -562,6 +562,58 @@ static int m25p80_read(struct mtd_info *
+@@ -110,6 +110,7 @@ struct m25p {
+ struct mtd_info mtd;
+ u16 page_size;
+ u16 addr_width;
++ u16 chunk_size;
+ u8 erase_opcode;
+ u8 read_opcode;
+ u8 program_opcode;
+@@ -562,6 +563,89 @@ static int m25p80_read(struct mtd_info *
return 0;
}
@@ -21,11 +30,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ struct spi_transfer t[2];
+ struct spi_message m;
+ uint8_t opcode;
-+ int idx = 0;
++ int idx, rlen;
+
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
+
++ mutex_lock(&flash->lock);
++ /* Wait till previous write/erase is done. */
++ if (wait_till_ready(flash)) {
++ /* REVISIT status return?? */
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
+ spi_message_init(&m);
+ memset(t, 0, (sizeof t));
+
@@ -36,21 +53,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+ *retlen = 0;
+
-+ while (idx < len) {
-+ int rlen = (len - idx > 4) ? (4) : (len - idx);
++ for (idx = 0; idx < len; idx += rlen) {
++ rlen = min_t(int, flash->chunk_size, len - idx);
++
++ if (idx)
++ wait_till_ready(flash);
+
+ t[1].rx_buf = &buf[idx];
+ t[1].len = rlen;
+
-+ mutex_lock(&flash->lock);
-+
-+ /* Wait till previous write/erase is done. */
-+ if (wait_till_ready(flash)) {
-+ /* REVISIT status return?? */
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
+ /* Set up the write data buffer. */
+ opcode = OPCODE_NORM_READ;
+ flash->command[0] = opcode;
@@ -59,103 +70,118 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ spi_sync(flash->spi, &m);
+
+ *retlen += m.actual_length - m25p_cmdsz(flash);
-+
-+ mutex_unlock(&flash->lock);
-+ idx += rlen;
+ }
++
++ mutex_unlock(&flash->lock);
++
+ return 0;
+}
+
- /*
- * Write an address range to the flash chip. Data must be written in
- * FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -649,6 +701,76 @@ static int m25p80_write(struct mtd_info
- return 0;
- }
-
-+static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const u_char *buf)
++static int m25p80_write_data(struct m25p *flash, struct spi_message *m,
++ struct spi_transfer *t, int to)
+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ struct spi_transfer t;
-+ struct spi_message m;
-+ u32 i, page_size;
-+ u8 tmp[8];
++ const void *buf = t->tx_buf;
++ int len = t->len;
++ int retlen = 0;
++ int chunk_size;
+
-+ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
-+ __func__, (u32)to, len);
-+
-+ spi_message_init(&m);
-+ memset(&t, 0, (sizeof t));
++ chunk_size = flash->chunk_size;
++ if (!chunk_size)
++ chunk_size = len;
+
-+ t.tx_buf = tmp;
-+ t.len = 8;
-+ spi_message_add_tail(&t, &m);
-+
-+ mutex_lock(&flash->lock);
-+
-+ /* Wait until finished previous write command. */
-+ if (wait_till_ready(flash)) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
++ while (retlen < len) {
++ t->tx_buf = buf + retlen;
++ t->len = min_t(int, chunk_size, len - retlen);
+
-+ write_enable(flash);
-+
-+ /* Set up the opcode in the write buffer. */
-+ flash->command[0] = OPCODE_PP;
-+ m25p_addr2cmd(flash, to, flash->command);
-+
-+ t.len = 4 + (to & 0x3);
-+ if (t.len == 4)
-+ t.len = 8;
-+ memcpy(tmp, flash->command, 4);
-+ memcpy(&tmp[4], buf, t.len - 4);
-+ spi_sync(flash->spi, &m);
-+ page_size = t.len - 4;
-+
-+ *retlen = m.actual_length - m25p_cmdsz(flash);
-+
-+ /* write everything in flash->page_size chunks */
-+ for (i = page_size; i < len; i += page_size) {
-+ page_size = len - i;
-+ if (page_size > 4)
-+ page_size = 4;
-+
-+ /* write the next page to flash */
-+ m25p_addr2cmd(flash, to + i, flash->command);
-+
-+ memcpy(tmp, flash->command, 4);
-+ memcpy(&tmp[4], buf + i, page_size);
-+ t.len = 4 + page_size;
-+
-+ wait_till_ready(flash);
++ if (retlen)
++ wait_till_ready(flash);
+
+ write_enable(flash);
++ m25p_addr2cmd(flash, to + retlen, flash->command);
++ spi_sync(flash->spi, m);
+
-+ spi_sync(flash->spi, &m);
-+
-+ *retlen += m.actual_length - m25p_cmdsz(flash);
++ retlen += m->actual_length - m25p_cmdsz(flash);
+ }
+
-+ mutex_unlock(&flash->lock);
-+
-+ return 0;
++ return retlen;
+}
+
- static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1260,6 +1382,12 @@ static int m25p_probe(struct spi_device
- return -EINVAL;
+ /*
+ * Write an address range to the flash chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+@@ -596,11 +680,8 @@ static int m25p80_write(struct mtd_info
+ return 1;
}
-+ if (np && of_property_read_bool(np, "m25p,chunked-io")) {
+- write_enable(flash);
+-
+ /* Set up the opcode in the write buffer. */
+ flash->command[0] = flash->program_opcode;
+- m25p_addr2cmd(flash, to, flash->command);
+
+ page_offset = to & (flash->page_size - 1);
+
+@@ -608,9 +689,7 @@ static int m25p80_write(struct mtd_info
+ if (page_offset + len <= flash->page_size) {
+ t[1].len = len;
+
+- spi_sync(flash->spi, &m);
+-
+- *retlen = m.actual_length - m25p_cmdsz(flash);
++ *retlen = m25p80_write_data(flash, &m, &t[1], to);
+ } else {
+ u32 i;
+
+@@ -618,9 +697,7 @@ static int m25p80_write(struct mtd_info
+ page_size = flash->page_size - page_offset;
+
+ t[1].len = page_size;
+- spi_sync(flash->spi, &m);
+-
+- *retlen = m.actual_length - m25p_cmdsz(flash);
++ *retlen = m25p80_write_data(flash, &m, &t[1], to);
+
+ /* write everything in flash->page_size chunks */
+ for (i = page_size; i < len; i += page_size) {
+@@ -628,19 +705,12 @@ static int m25p80_write(struct mtd_info
+ if (page_size > flash->page_size)
+ page_size = flash->page_size;
+
+- /* write the next page to flash */
+- m25p_addr2cmd(flash, to + i, flash->command);
+-
+ t[1].tx_buf = buf + i;
+ t[1].len = page_size;
+
+ wait_till_ready(flash);
+
+- write_enable(flash);
+-
+- spi_sync(flash->spi, &m);
+-
+- *retlen += m.actual_length - m25p_cmdsz(flash);
++ *retlen += m25p80_write_data(flash, &m, &t[1], to + i);
+ }
+ }
+
+@@ -1105,6 +1175,7 @@ static int m25p_probe(struct spi_device
+ struct mtd_part_parser_data ppdata;
+ struct device_node *np = spi->dev.of_node;
+ int ret;
++ u32 val;
+
+ /* Platform data helps sort out which chip type we have, as
+ * well as how this board partitions it. If we don't have
+@@ -1187,6 +1258,12 @@ static int m25p_probe(struct spi_device
+ flash->mtd._erase = m25p80_erase;
+ flash->mtd._read = m25p80_read;
+
++ if (np && !of_property_read_u32(np, "m25p,chunked-io", &val)) {
+ dev_warn(&spi->dev, "using chunked io\n");
+ flash->mtd._read = m25p80_read_chunked;
-+ flash->mtd._write = m25p80_write_chunked;
++ flash->chunk_size = val;
+ }
+
- flash->program_opcode = OPCODE_PP;
-
- if (info->addr_width)
+ /* flash protection support for STmicro chips */
+ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
+ flash->mtd._lock = m25p80_lock;
generated by cgit v1.1 at 2024-12-15 16:35:42 +0000