diff options
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/ZBT-WG3526.dts | 127 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 6 | ||||
| -rw-r--r-- | target/linux/ramips/mt7621/profiles/zbt.mk | 13 |
7 files changed, 153 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2863b88..3c958ae 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -86,6 +86,7 @@ ramips_setup_interfaces() wt1520|\ y1|\ zbt-wg2626|\ + zbt-wg3526|\ youku-yk1) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 44353b6..bd0ff05 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,7 +66,8 @@ get_status_led() { v11st-fe|\ vocore|\ wmr-300|\ - zbt-wg2626) + zbt-wg2626|\ + zbt-wg3526) status_led="$board:green:status" ;; atp-52b|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 459de6f..550ec55 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -508,6 +508,9 @@ ramips_board_detect() { *"ZBT-WG2626") name="zbt-wg2626" ;; + *"ZBT-WG3526") + name="zbt-wg3526" + ;; *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e880f60..73ba6e6 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -151,6 +151,7 @@ platform_check_image() { zbt-wa05|\ zbt-we826|\ zbt-wg2626|\ + zbt-wg3526|\ zbt-wr8305rt|\ zte-q7|\ youku-yk1) diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts new file mode 100644 index 0000000..30b508c --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WG3526.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "ZBT-WG3526"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "zbt-wg3526:green:status"; + gpios = <&gpio0 24 1>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0732a44..0af9596 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -103,6 +103,12 @@ define Device/zbt-wg2626 endef TARGET_DEVICES += zbt-wg2626 +define Device/zbt-wg3526 + DTS := ZBT-WG3526 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef +TARGET_DEVICES += zbt-wg3526 + define Device/wf-2881 DTS := WF-2881 BLOCKSIZE := 128KiB diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk index 0073645..453687d 100644 --- a/target/linux/ramips/mt7621/profiles/zbt.mk +++ b/target/linux/ramips/mt7621/profiles/zbt.mk @@ -16,3 +16,16 @@ define Profile/ZBT-WG2626/Description Package set for ZBT-WG2626 device endef $(eval $(call Profile,ZBT-WG2626)) + + +define Profile/ZBT-WG3526 + NAME:=ZBT-WG3526 Device + PACKAGES:=\ + kmod-usb-core kmod-usb3 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci +endef + +define Profile/ZBT-WG3526/Description + Package set for ZBT-WG3526 device +endef +$(eval $(call Profile,ZBT-WG3526)) |