diff options
| -rw-r--r-- | package/ar7-atm/Makefile | 68 | ||||
| -rw-r--r-- | target/linux/ar7-2.4/Makefile | 45 | ||||
| -rw-r--r-- | target/linux/ar7-2.4/patches/004-atm_driver.patch | 27172 |
3 files changed, 68 insertions, 27217 deletions
diff --git a/package/ar7-atm/Makefile b/package/ar7-atm/Makefile new file mode 100644 index 0000000..c305f33 --- /dev/null +++ b/package/ar7-atm/Makefile @@ -0,0 +1,68 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id:$ + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/kernel.mk + +PKG_NAME:=sangam-atm +PKG_VERSION:=0.1 +PKG_RELEASE:=1 + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_URL:=http://downloads.openwrt.org/sources +PKG_MD5SUM:=90c10702c9c3129e2ad1c01ce3975bf5 +PKG_CAT:=bzcat + +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) + +include $(INCLUDE_DIR)/package.mk + +define Package/kmod-sangam-atm-annex-a + SECTION:=kernel + CATEGORY:=Kernel modules + SUBMENU:=Network Devices + DEPENDS:=@LINUX_2_4_AR7 +kmod-atm + DEFAULT:=y + TITLE:=AR7 ADSL driver (Annex A) + DESCRIPTION:=The AR7 ADSL driver for Annex A + VERSION:=$(PKG_VERSION)+$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE) +endef + +define Package/kmod-sangam-atm-annex-b + $(call Package/kmod-sangam-atm-annex-a) + TITLE:=AR7 ADSL driver (Annex B) + DESCRIPTION:=The AR7 ADSL driver for Annex B +endef + +define Build/Compile + $(MAKE) -C "$(LINUX_DIR)" \ + CROSS_COMPILE="$(TARGET_CROSS)" \ + ARCH="$(LINUX_KARCH)" \ + SUBDIRS="$(PKG_BUILD_DIR)" \ + modules +endef + +define install + install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION) + $(CP) $(PKG_BUILD_DIR)/tiatm.$(LINUX_KMOD_SUFFIX) \ + $(1)/lib/modules/$(LINUX_VERSION) + install -m0644 $(PKG_BUILD_DIR)/ar0700xx_a.bin $(1)/lib/modules/ar0700xx.bin + install -m0755 -d $(1)/etc/modules.d/ + printf 'tiatm\n' > $(1)/etc/modules.d/20-switch +endef + +define Package/kmod-sangam-atm-annex-a/install + $(call install,$(1),a) +endef + +define Package/kmod-sangam-atm-annex-b/install + $(call install,$(1),b) +endef + +$(eval $(call BuildPackage,kmod-sangam-atm-annex-a)) +$(eval $(call BuildPackage,kmod-sangam-atm-annex-b)) diff --git a/target/linux/ar7-2.4/Makefile b/target/linux/ar7-2.4/Makefile index d385722..aececf8 100644 --- a/target/linux/ar7-2.4/Makefile +++ b/target/linux/ar7-2.4/Makefile @@ -13,60 +13,15 @@ LINUX_KERNEL_MD5SUM:=38f4d0830e95a20f4bfed17622d5557c include ./config include $(INCLUDE_DIR)/kernel.mk -ATM_FIRMWARE_VERSION:=0.4 -ATM_FIRMWARE_DIR=sangam-atm-firmware-$(ATM_FIRMWARE_VERSION) - -$(eval $(call KMOD_template,SANGAM_ATM_A,sangam-atm-annex-a,\ - $(MODULES_DIR)/kernel/drivers/atm/tiatm.o \ -,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \ - $(CP) $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_a.bin $$(I_SANGAM_ATM_A)/lib/modules/ar0700xx.bin \ -)) - -$(eval $(call KMOD_template,SANGAM_ATM_B,sangam-atm-annex-b,\ - $(MODULES_DIR)/kernel/drivers/atm/tiatm.o \ -,CONFIG_MIPS_SANGAM_ATM,kmod-atm,60,tiatm, \ - $(CP) $(BUILD_DIR)/$(ATM_FIRMWARE_DIR)/ar0700xx_b.bin $$(I_SANGAM_ATM_B)/lib/modules/ar0700xx.bin \ -)) - $(eval $(call KMOD_template,CPMAC,cpmac,\ $(MODULES_DIR)/kernel/drivers/net/avalanche_cpmac/avalanche_cpmac.o \ ,CONFIG_MIPS_AVALANCHE_CPMAC,,10,avalanche_cpmac)) include $(INCLUDE_DIR)/kernel-build.mk - $(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches @$(CP) config $(LINUX_DIR)/.config touch $@ - -############################################### -# ATM firmware for the DSL modem -############################################### - -DOWNLOAD_SITE=http://openwrt.org/downloads/downloads -# extracted from netgear DG834B V1.0.5 GPL release -ATM_FIRMWARE_FILE=$(ATM_FIRMWARE_DIR).tar.gz -ATM_FIRMWARE_MD5SUM=8bfcb31109796502d66b11baaeb2fba6 - -$(DL_DIR)/$(ATM_FIRMWARE_FILE): - $(SCRIPT_DIR)/download.pl $(DL_DIR) $(ATM_FIRMWARE_FILE) $(ATM_FIRMWARE_MD5SUM) $(DOWNLOAD_SITE) - -download: $(DL_DIR)/$(ATM_FIRMWARE_FILE) -$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(ATM_FIRMWARE_FILE) -$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked -$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked - -$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked - -mkdir -p $(BUILD_DIR) - zcat $(DL_DIR)/$(ATM_FIRMWARE_FILE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) - - touch $@ - -linux-dirclean: drivers-clean - -drivers-clean: FORCE - rm -rf $(BUILD_DIR)/$(ATM_FIRMWARE_DIR) - - diff --git a/target/linux/ar7-2.4/patches/004-atm_driver.patch b/target/linux/ar7-2.4/patches/004-atm_driver.patch index f6a9208..9efb62f 100644 --- a/target/linux/ar7-2.4/patches/004-atm_driver.patch +++ b/target/linux/ar7-2.4/patches/004-atm_driver.patch @@ -1,27175 +1,3 @@ -diff -urN linux.old/drivers/atm/Config.in linux.dev/drivers/atm/Config.in ---- linux.old/drivers/atm/Config.in 2005-08-22 23:18:37.773532032 +0200 -+++ linux.dev/drivers/atm/Config.in 2005-08-23 04:46:50.076846888 +0200 -@@ -99,4 +99,10 @@ - bool 'Use S/UNI PHY driver' CONFIG_ATM_HE_USE_SUNI - fi - fi -+# -+# Texas Instruments SANGAM ADSL/ATM support -+# -+if [ "$CONFIG_AR7" = "y" ]; then -+ tristate 'Texas Instruments SANGAM ATM/ADSL support' CONFIG_MIPS_SANGAM_ATM -+fi - endmenu -diff -urN linux.old/drivers/atm/Makefile linux.dev/drivers/atm/Makefile ---- linux.old/drivers/atm/Makefile 2005-08-22 23:18:37.773532032 +0200 -+++ linux.dev/drivers/atm/Makefile 2005-08-23 04:46:50.077846736 +0200 -@@ -14,6 +14,32 @@ - obj-$(CONFIG_ATM_NICSTAR) += nicstar.o - obj-$(CONFIG_ATM_IDT77252) += idt77252.o - -+ifeq ($(CONFIG_AR7),y) -+ -+subdir-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm -+ -+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT -+#EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -+ -+ifeq ($(ANNEX),B) -+EXTRA_CFLAGS += -DANNEX_B -DB -+else -+ifeq ($(ANNEX),C) -+EXTRA_CFLAGS += -DANNEX_C -DC -+else -+EXTRA_CFLAGS += -DANNEX_A -DP -+endif -+endif -+ -+list-multi := tiatm.o -+tiatm-objs := sangam_atm/tn7atm.o sangam_atm/tn7dsl.o sangam_atm/tn7sar.o \ -+ sangam_atm/dsl_hal_api.o sangam_atm/dsl_hal_support.o sangam_atm/cpsar.o \ -+ sangam_atm/aal5sar.o -+ -+obj-$(CONFIG_MIPS_SANGAM_ATM) += sangam_atm/tiatm.o -+ -+endif -+ - ifeq ($(CONFIG_ATM_NICSTAR_USE_SUNI),y) - obj-$(CONFIG_ATM_NICSTAR) += suni.o - endif -diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.c linux.dev/drivers/atm/sangam_atm/aal5sar.c ---- linux.old/drivers/atm/sangam_atm/aal5sar.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/aal5sar.c 2005-08-23 04:46:50.080846280 +0200 -@@ -0,0 +1,2962 @@ -+ -+/** -+ * -+ * aal5sar.c -+ * -+ * TNETDxxxx Software Support\n -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * version -+ * 28Feb02 Greg 1.00 Original Version created.\n -+ * 06Mar02 Greg 1.01 Documentation (Doxygen-style) enhanced -+ * 06May02 Greg 1.02 AAL2 added -+ * 06Jun02 Greg 1.03 Multiple API and bug fixes from emulation -+ * 12Jul02 Greg 1.04 API Update -+ */ -+ -+/** -+@defgroup CPHAL_Functions CPHAL Functions -+ -+These are the CPHAL Functions. -+*/ -+ -+/** -+@page CPHAL_Implementation_Details -+ -+@section cphal_intro Introduction -+ -+The CPHAL API described above is generally applicable to all modules. Any -+implementation differences will be described in the following module-specific -+appendix sections. -+ -+Included for your reference is a diagram showing the internal architecture -+of the CPHAL: -+ -+@image html SangamSoftware.jpg "HAL Architecture" -+@image latex SangamSoftware.jpg "HAL Architecture" height=2.8in -+ -+*/ -+ -+/** -+@defgroup AAL5_Functions Additional Functions for AAL5 Implementation -+ -+These functions are used only by the AAL5 module. -+*/ -+ -+/* -+@defgroup CPMAC_Functions Additional Functions for CPMAC Implementation -+ -+No additional functions currently defined. -+*/ -+ -+/** -+@page VDMA_Implementation_Details -+ -+@section vdma_intro Introduction -+ -+The VDMA-VT module facilitates efficient transfer of data (especially voice) -+between two devices, as shown in the figure below. -+ -+@image html vdma.jpg "VDMA System Block Diagram" -+@image latex vdma.jpg "VDMA System Block Diagram" height=1in -+ -+The VDMA-VT module supports two modes of operation: mirror mode and credit mode. -+Mirror mode is intended for systems in which the remote device does not have a -+VDMA-based module. Credit mode is intended for highest performance when VDMA-based -+modules exist on both ends of an interface. -+ -+For more detailed information on the operation of the VDMA module, please -+reference the VDMA Module Guide. -+ -+@section vdma_channels VDMA Channels -+ -+The VDMA-VT module is a single channel, single transmit queue device. Therefore, -+when using the CHANNEL_INFO structure, the correct value for @c Ch is always 0. -+Correspondingly, the correct value for the @c Ch parameter in @c ChannelTeardown() is -+always 0. Further, when calling @c Send(), the driver should always supply the value -+of 0 for both the @c Ch and @c Queue parameters. -+ -+For the VDMA-VT, configuring the channel requires the configuration of either 2 FIFO -+elements (in credit mode) or 4 FIFO elements (in mirror mode). For credit mode, the -+driver must configure just the local Tx and Rx FIFOs. For mirror mode, the driver must -+configure the Tx and Rx FIFOs for both the remote and local ends of the interface. -+ -+This channel configuration is accomplished through multiple calls to @c ChannelSetup(). -+Each call configures a single FIFO, according to the parameters in the CHANNEL_INFO -+structure. The members of VDMA-VT's CHANNEL_INFO structure are defined below. -+ -+ -+- int RemFifoAddr; Address of remote FIFO (mirror mode only). Set to 0 for credit mode. -+- int FifoAddr; Address of the local FIFO. If 0, the CPHAL will allocate the FIFO. -+- int FifoSize; Size of the FIFO. -+- int PollInt; Polling interval for the FIFO. -+- int Endianness; Endianness of the FIFO. If 1, big endian. If 0, little endian. -+- int RemAddr; Used only in credit mode. This is the base address of the remote -+ remote VDMA-based device (VDMA-VT or AAL2) -+- int RemDevID; Used only in credit mode. Identifies the type of remote VDMA-based device. -+ 0=VDMAVT, 1=AAL2 Ch0, 2=AAL2 Ch1, 3=AAL2 Ch2, 4= AAL2 Ch3. -+ -+For the VDMA-VT module, the driver must make all calls to @c ChannelSetup() prior to calling -+@c Open(). This is because several of the channel specific parameters may not be changed -+while the VDMA-VT module is operational. -+ -+@section vdma_params VDMA Parameters -+ -+Defined here are the set of parameters for the VDMA-VT module. Default settings for -+each parameter should be represented in the device configuration file (options.conf). -+During @c Init(), the CPHAL will reference the device configuration file and load all -+default settings. The @c Control() interface gives the driver an opportunity to -+modify any default settings before the module becomes operational during the @c Open() -+call. -+ -+@param NoTxIndication If 1, the CPHAL will not call @c SendComplete(). 0 is default. -+@param NoRxIndication If 1, the CPHAL will not call @c Receive(). 0 is default. -+@param RemoteCPU If 1, the CPHAL will not directly manipulate data in FIFO's, leaving -+ that task for a remote CPU. 0 is default. -+@param RxIntEn If 1, enables Rx interrupts. 0 is default. -+@param TxIntEn If 1, enables Tx interrupts. 0 is default. -+@param Mirror If 1, enables mirror mode. 0 selects credit mode (default). -+@param RxIntCtl Valid only in mirror mode. If 1, interrupts will occur when the Rx FIFO -+ RdIndex is updated. If 0, interrupts occur when the Rx FIFO WrIndex -+ is updated. -+@param TxIntCtl Valid only in mirror mode. If 1, interrupts will occur when the Rx FIFO -+ RdIndex is updated. If 0, interrupts occur when the Rx FIFO WrIndex -+ is updated. -+@param RBigEn Remote big endian mode. If 1, remote is big endian. -+@param LBigEn Local big endian mode. If 1, local is big endian. -+ -+@section vdma_polling Using VDMA-VT without interrupts -+ -+If your system configuration does not utilize VDMA interrupts, the ability to process the -+Tx and Rx FIFOs is supported. To process the Tx FIFO, call @c CheckTx(). If the CPHAL is -+able to process any complete data transmissions, it will call @c SendComplete() as usual. -+To process the Rx FIFO, call @c CheckRx(). If the CPHAL has received any data, it will -+call @c Receive() to pass the driver the data. Please reference @ref VDMA_Functions for more -+information on these interfaces. -+ -+@section vdma_details VDMA Implementation Details -+ -+The following functions are not defined for use with VDMA: @c Status(), @c Tick(), @c StatsGet(), -+and @c StatsClear(). -+ -+*/ -+ -+/** -+@page AAL5_Implementation_Details -+ -+@section aal5_ver Version -+ -+@copydoc AAL5_Version -+ -+@section aal5_intro Introduction -+ -+The AAL5 implementation will support 16 channels for transmit and 16 channels for -+receive. Each of the transmit channels may have up to two transmit queues -+associated with it. If two queues are used, Queue 0 is the high priority queue, -+and Queue 1 is the low priority queue. -+ -+@section aal5_params AAL5 Configuration Parameters -+ -+AAL5 requires two device entries to be available in the configuration repository, named -+@p "aal5" and @p "sar". The @p aal5 device entry must contain @p base (base address) -+and @p int_line (interrupt number). The @p sar device entry must have both @p base -+(base address) and @p reset_bit (reset bit). -+ -+@par Device Level Configuration Parameters -+ -+The following parameters are device-level parameters, which apply across all -+channels. The value for these parameters may be modified by changing the value in the -+configuration repository. -+ -+- "UniNni": -+AAL5 network setting. 0 = UNI (default), 1 = NNI. -+ -+@par Channel Configuration Parameters -+ -+All AAL5 channel parameters may also be configured through the @c ChannelSetup() interface. -+Following is the list of @p CHANNEL_INFO members that may be modified by the driver when -+calling @c ChannelSetup(). The driver may provide a value of 0xFFFFFFFF for any channel -+parameter to select a default value for the parameter. The driver should at a minimum -+configure @p Vci and @p Vpi. The usage of all parameters beginning with TxVc_, -+TxVp_, RxVc_, RxVp_ is described in greater detail in the SAR Firmware Spec. -+These parameters are mainly associated with QoS and OAM functionality. -+ -+- "RxNumBuffers": -+The number of Rx buffer descriptors to allocate for Ch. -+- "RxBufSize": -+Size (in bytes) for each Rx buffer. -+- "RxBufferOffset": -+Number of bytes to offset rx data from start of buffer (must be less than buffer size). -+- "RxServiceMax": -+Maximum number of packets to service at one time. -+- "TxNumBuffers": -+The number of Tx buffer descriptors to allocate for Ch. -+- "TxNumQueues": -+Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. -+- "TxServiceMax": -+Maximum number of packets to service at one time. -+- "CpcsUU": -+The 2-byte CPCS UU and CPI information. -+- "Gfc": -+Generic Flow Control. Used in ATM header of Tx packets. -+- "Clp": -+Cell Loss Priority. Used in ATM header of Tx packets. -+- "Pti": -+Payload Type Indication. Used in ATM header of Tx packets. -+- "DaMask": -+Specifies whether credit issuance is paused when Tx data not available. -+- "Priority": -+Priority bin this channel will be scheduled within. -+- "PktType": -+0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. -+- "Vci": -+Virtual Channel Identifier. -+- "Vpi": -+Virtual Path Identifier. -+- "TxVc_AtmHeader": -+In firmware OAM mode, this -+is the ATM header to be appended to front of firmware generated VC OAM cells for -+this channel. Note: To generate host OAM cells, call @c Send() with -+the appropriate mode. -+- "TxVc_CellRate": -+Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). -+- "TxVc_QosType": -+0=CBR,1=VBR,2=UBR,3=UBRmcr. -+- "TxVc_Mbs": -+Min Burst Size in cells. -+- "TxVc_Pcr": -+Peak Cell Rate for VBR in clock ticks between transmissions. -+- "TxVc_OamTc": -+TC Path to transmit OAM cells for TX connections (0,1). -+- "TxVc_VpOffset": -+Offset to the OAM VP state table for TX connections. Channels with the same -+VPI must have the same VpOffset value. Channels with different VPIs -+must have unique VpOffset values. -+- "RxVc_OamCh": -+Channel to which to terminate received OAM cells to be forwarded to the Host -+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware -+OAM mode. -+- "RxVc_OamToHost": -+Indicates whether to pass received unmatched OAM loopback cells to the host; -+0=do not pass, 1=pass. -+- "RxVc_AtmHeader": -+ATM Header placed on firmware gen'd OAM cells for this channel on a Rx -+connection (must be big endian with 0 PTI). -+- "RxVc_OamTc": -+TC Path to transmit OAM cells for RX connections (0,1). -+- "RxVc_VpOffset": -+Offset to the OAM VP state table for RX connections. Channels with the same -+VPI must have the same VpOffset value. Channels with different VPIs -+must have unique VpOffset values. -+- "TxVp_OamTc": -+TC Path to transmit OAM cells for TX VP connections (0,1). -+- "TxVp_AtmHeader": -+ATM Header placed on firmware gen'd VP OAM cells for this channel on a Tx VP -+connection (must be big endian with 0 VCI). -+- "RxVp_OamCh": -+Channel to which to terminate received OAM cells to be forwarded to the Host -+for either Host OAM mode, or when RxVc_OamToHost is enabled during Firmware -+OAM mode. -+- "RxVp_OamToHost": -+Indicates whether to pass received unmatched OAM loopback cells to the host; -+0=do not pass, 1=pass. -+- "RxVp_AtmHeader": -+In firmware OAM mode, this -+is the ATM header to be appended to front of firmware generated VP OAM cells for -+this channel. Note: To generate host OAM cells, call @c Send() with -+the appropriate mode. -+- "RxVp_OamTc": -+TC Path to transmit OAM cells for RX VP connections (0,1). -+- "RxVp_OamVcList": -+This 32-bit field is one-hot encoded to indicate all the VC channels that are -+associated with this VP channel. A value of 21 will indicate that VC -+channels 0, 2, and 4 are associated with this VP channel. -+- "FwdUnkVc": -+Indicates whether or not to forward unknown VCI/VPI cells to the host. This -+parameter only takes effect if the channel's PktType is Transparent(3). -+1=forwarding enabled, 0=forwarding disabled. -+ -+@section aal5_details API Implementation Details -+ -+ATTENTION: Documentation given here supplements the documentation given in the general -+CPHAL API section. The following details are crucial to correct usage of the -+AAL5 CPHAL. -+ -+@par Receive() -+The least significant byte of @p Mode contains the channel number. Bit 31 -+indicates whether or not the ATM header is present in the first fragment of -+the packet. If bit 31 is set, the 4 byte ATM header (minus HEC) will be provided -+in the first fragment, with the payload beginning in the second fragment. Currently, -+this is the default behavior for host OAM and transparent mode packets. -+Bits 17-16 indicate the packet type that is being received. -+Mode Parameter Breakdown: <BR> -+- 31 ATM Header In First Fragment (1=true, 0=false) <BR> -+- 30-18 Unused. <BR> -+- 17-16 Pkt Type. <BR> -+ - 0=AAL5 <BR> -+ - 1=PTI Based Null AAL <BR> -+ - 2=OAM <BR> -+ - 3=Transparent <BR> -+- 15-08 Unused. <BR> -+- 07-00 Channel Number. -+ -+@par Send() -+The most significant 16 bits of the first fragment 'len' is used as the Offset -+to be added to the packet. @c Send() will reserve this many bytes at the -+beginning of the transmit buffer prior to the first byte of valid data. -+For the @p Mode parameter, Bit 31 must be set if the user has sent a packet with -+the ATM Header (minus HEC) embedded in the first 4 bytes of the first fragment data buffer. -+The OS has the option of using a 4 byte first fragment containing only ATM header, -+or concatenating the ATM Header in front of the data payload. -+If Bit 31 is set, the ATM Header in the buffer is preserved and sent with -+each cell of the packet. Otherwise, Send() will build the ATM header based on the -+values of the Pti, Gfc, Clp, Vpi, and Vci parameters for the given channel. -+Bits 17-16 are defined as the packet type. Bits 15-08 may be used to specify the -+transmit queue to send the packet on. Only values 0 (high priority) and 1 (low -+priority) are accepted. Bits 07-00 should be used to indicate the channel number -+for the @c Send() operation. Valid channel numbers are 0-15. -+Mode Parameter Breakdown: <BR> -+- 31 ATM Header In Packet (1=true, 0=false) <BR> -+- 30-18 Unused. <BR> -+- 17-16 Pkt Type. <BR> -+ - 0=AAL5 <BR> -+ - 1=PTI Based Null AAL <BR> -+ - 2=OAM <BR> -+ - 3=Transparent <BR> -+- 15-08 Transmit Queue. <BR> -+- 07-00 Channel Number. -+ -+@par ChannelSetup() -+The AAL5 @c ChannelSetup() always configures both the Tx and Rx side of the channel -+connection in the same call. -+ -+@par ChannelTeardown() -+Regardless of the channel teardown direction selected, the AAL5 CPHAL will always -+teardown both the Tx and Rx side of the channel connection. -+ -+@par TeardownComplete() -+The value for the @p Direction parameter should be ignored for the AAL5 implementation, -+since both directions (Tx and Rx) are always torndown in response to a @c ChannelTeardown() -+command. -+ -+@par Control() (HAL version) -+Defined keys and actions. Unless otherwise stated, the data type -+for Value is pointer to unsigned integer. The list is broken into -+three groups, one group which can be used anytime, one group that should -+be used before halOpen(), and one group which can only be used after -+halOpen() (but before halClose()). For channelized parameters, replace -+'Ch' with the integer number of a channel (ex. "Gfc.4" can be used to set -+Gfc for channel 4). -+ -+MAY USE ANYTIME AFTER INIT (after halInit() is called): -+ -+- "Gfc.Ch". The OS may "Set" this value. Changing this value causes -+the Gfc in each Tx ATM header for this channel to take on the new Gfc value. -+ -+- "Clp.Ch". The OS may "Set" this value. Changing this value causes -+the Clp in each Tx ATM header for this channel to take on the new Clp value. -+ -+- "Pti.Ch". The OS may "Set" this value. Changing this value causes -+the Pti in each Tx ATM header for this channel to take on the new Pti value. -+ -+- "CpcsUU.Ch". The OS may "Set" this value. Changing this value causes -+the CpcsUU in each Tx ATM header for this channel to take on the new CpcsUU value. -+ -+- "OamMode". Specifies if host or firmware is performing OAM functions; 0 = Host OAM, -+1 = Firmware OAM. When set, all SAR channels will be configured for -+the selection, including AAL2 channels. -+ -+- "OamLbTimeout". Specifies the firmware OAM loopback timeout, in milliseconds. -+ -+- "DeviceCPID". The OS may "Set" this value. This is the OAM connection -+point identifier. The OS should provide a pointer to an array of 4 32-bit -+integers. Each word must be configured in big endian format. -+ -+- "FwdUnkVc.Ch". Indicates whether or not to forward unknown VCI/VPI cells to the host. -+This parameter only takes effect if the channel's PktType is Transparent(3). -+1=forwarding enabled, 0=forwarding disabled. -+ -+MAY USE ONLY BEFORE HAL IS OPEN (before halOpen() call): -+- "StrictPriority". The OS may "Set" this value. Setting to 1 causes -+a different interrupt processing routine to be used, which gives strict -+priority to channels with lower numbers (channel 0 has highest priority). -+The default handler gives equal priority to all channels. -+ -+- "MaxFrags". The OS may "Set" or "Get" this value. This defines the maximum -+number of fragments that can be received by the AAL5 Rx port. The default -+value for AAL5 is 46. This provides enough space to receive a maximum -+length AAL5 packet (65,568 bytes) with the default buffer size of 1518 bytes, and -+any amount of RxBufferOffset. If the buffer size is configured to be smaller, -+the OS *MUST* modify this parameter according to the following formula: -+((System Max AAL5 packet length)/(RxBufSize)) + 2. (The extra two fragments in -+the formula allow for RxBufferOffset and one fragment for the ATM Header, used -+when receiving host OAM or transparent mode packets) -+ -+MAY USE ONLY AFTER HAL IS 'OPEN' (after halOpen() call): -+- "Stats;Level;Ch;Queue". The OS may "Get" Stats groups with this key, where -+'Level' is an integer from 0-4, Ch is an integer from 0-15, and Queue is -+an integer from 0-1. Note that Ch is not required for Level 4 stats, and Queue -+is not required for Level 0, 3, and 4. The statistics functionality and return -+value is described in the appendix entitled "Configuration and Control". -+ -+- "TxVc_CellRate.Ch". The OS may "Set" this value. Can be used to modify -+CellRate for a channel on the fly. -+ -+- "TxVc_Mbs.Ch". The OS may "Set" this value. Can be used to modify -+Mbs for a channel on the fly. -+ -+- "TxVc_Pcr.Ch". The OS may "Set" this value. Can be used to modify -+Pcr for a channel on the fly. -+ -+- "PdspEnable". The OS may "Set" this value. Value 0 disables the PDSP. -+Value 1 enables to PDSP. -+ -+- "DeviceCPID". The OS may "Set" this value. The Value should be an array -+of 4 32-bit integers that comprise the CPID. -+ -+- "RxVc_RDICount.Ch". The OS may "Get" or "Set" this value. Get returns -+the current RDI count for the VC channel. Set clears the counter, and the Value -+is ignored. -+ -+- "RxVp_RDICount.Ch". The OS may "Get" or "Set" this value. Get returns -+the current RDI count for the VP channel. Set clears the counter, and the Value -+is ignored. -+ -+- "RxVc_AISseg.Ch". The OS may "Get" this value. This is an indication of -+AIS segment error for the VC channel. -+ -+- "RxVp_AISseg.Ch". The OS may "Get" this value. This is an indication of -+AIS segment error for the VP channel. -+ -+- "RxVc_AISetoe.Ch". The OS may "Get" this value. This is an indication of -+AIS end-to-end error for the VC channel. -+ -+- "RxVp_AISetoe.Ch". The OS may "Get" this value. This is an indication of -+AIS end-to-end error for the VP channel. -+ -+- "RxVc_OamCh.Ch". The OS may "Set" this value. Channel to which to terminate -+received OAM cells to be forwarded to the Host for either Host OAM mode, or when -+RxVc_OamToHost is enabled during Firmware OAM mode. -+ -+- "RxVp_OamCh.Ch". The OS may "Set" this value. Channel to which to terminate -+received OAM cells to be forwarded to the Host for either Host OAM mode, or when -+RxVp_OamToHost is enabled during Firmware OAM mode. -+ -+- "F4_LB_Counter". The OS may "Get" this value. This is a count of the number -+ of near-end F4 loopbacks performed by the PDSP in firmware OAM mode. -+ -+- "F5_LB_Counter". The OS may "Get" this value. This is a count of the number -+ of near-end F5 loopbacks performed by the PDSP in firmware OAM mode. -+ -+- "TxVc_AtmHeader.Ch". The OS may "Set" this value. In firmware OAM mode, this -+is the ATM header to be appended to front of firmware generated VC OAM cells for -+this channel. In host OAM mode, this is used as the ATM header to be appended -+to front of host generated VC OAM cells for this channel. It must be configured -+as big endian with PTI=0. Note: To generate host OAM cells, call @c Send() with -+the appropriate mode. -+ -+- "TxVp_AtmHeader.Ch". The OS may "Set" this value. In firmware OAM mode, this -+is the ATM header to be appended to front of firmware generated VP OAM cells for -+this channel. In host OAM mode, this is used as the ATM header to be appended -+to front of host generated VP OAM cells for this channel. It must be configured -+as big endian with VCI=0. Note: To generate host OAM cells, call @c Send() with -+the appropriate mode. -+ -+- "PdspEnable". The OS may "Set" this value. Controls whether or not the PDSP is -+allowed to fetch new instructions. The PDSP is enabled by the CPHAL during Open(), -+and disabled during Close(). 0 = disabled, 1 = enabled. -+ -+@par Control() (OS version) -+Defined keys and actions: -+ -+- "Firmware". The CPHAL will perform a "Get" action for the key "Firmware". A pointer -+to a pointer is passed in @p Value. The OS must modify the referenced pointer to point -+to the firmware. -+ -+- "FirmwareSize". The CPHAL will perform a "Get" action for the key "FirmwareSize". -+The OS must place the firmware size in the memory pointed at by @p Value. -+ -+- "OamLbResult". When a channel that is in firmware OAM mode is commanded to perform -+a loopback function, the result of the loopback generates an interrupt that is handled -+by the OS like any other interrupt. The CPHAL, upon servicing the interrupt, will call -+osControl with this key, and an action of "Set". The @p Value parameter will be a -+pointer to the integer result. 1 = pass, 0 = fail. -+ -+- "SarFreq". The CPHAL will perform a "Get" action for this key. The OS should place -+the SAR frequency (in Hz) in the memory pointed at by @p Value. -+ -+@section aal5_stats AAL5 Specific Statistics -+ -+Statistics level '0' contains all AAL5 specific statistics. The following values will -+be obtained when requesting stats level 0: -+ -+- "Crc Errors". Number of CRC errors reported by SAR hardware. Incremented for received -+packets that contain CRC errors. -+ -+- "Len Errors". Number of length errors reported by SAR hardware. Incremented for received -+packets that are in excess of 1366 cells. -+ -+- "Abort Errors". Number of abort errors reported by SAR hardware. -+ -+- "Starv Errors". Number of buffer starvation errors reported by SAR hardware. Incremented -+when a part or all of a buffer cannot be received due to lack of RX buffer resources. The SAR -+drops all cells associated with the packet for each buffer starvation error that occurs. -+ -+*/ -+ -+/* register files */ -+#include "cp_sar_reg.h" -+ -+#define _CPHAL_AAL5 -+#define _CPHAL -+#define _CPPI_TEST /** @todo remove for release */ -+#define __CPHAL_CPPI_OFFSET /* support use of offset */ -+ -+/* OS Data Structure definitions */ -+ -+typedef void OS_PRIVATE; -+typedef void OS_DEVICE; -+typedef void OS_SENDINFO; -+typedef void OS_RECEIVEINFO; -+typedef void OS_SETUP; -+ -+/* CPHAL Data Structure definitions */ -+ -+typedef struct hal_device HAL_DEVICE; -+typedef struct hal_private HAL_PRIVATE; -+typedef struct hal_private HAL_RECEIVEINFO; -+ -+/* include CPHAL header files here */ -+#include "cpcommon_cpaal5.h" -+#include "cpswhal_cpaal5.h" -+#include "aal5sar.h" -+#include "cpcommon_cpaal5.c" -+ -+#define CR_SERVICE (170-1) -+#define UTOPIA_PAUSE_REG (*(volatile bit32u *)0xa4000000) -+ -+/* -+these masks are for the mode parameter used in halSend/OsReceive -+(may move these elsewhere) -+*/ -+#define CH_MASK 0xff -+#define PRI_MASK 0x10000 -+ -+/* Rcb/Tcb Constants */ -+#define CB_SOF_BIT (1<<31) -+#define CB_EOF_BIT (1<<30) -+#define CB_SOF_AND_EOF_BIT (CB_SOF_BIT|CB_EOF_BIT) -+#define CB_OWNERSHIP_BIT (1<<29) -+#define CB_EOQ_BIT (1<<28) -+#define CB_SIZE_MASK 0x0000ffff -+#define CB_OFFSET_MASK 0xffff0000 -+#define RCB_ERRORS_MASK 0x03fe0000 -+#define RX_ERROR_MASK 0x000f0000 -+#define CRC_ERROR_MASK 0x00010000 -+#define LENGTH_ERROR_MASK 0x00020000 -+#define ABORT_ERROR_MASK 0x00040000 -+#define STARV_ERROR_MASK 0x00080000 -+#define TEARDOWN_VAL 0xfffffffc -+ -+/* interrupt vector masks */ -+#define TXH_PEND 0x01000000 -+#define TXL_PEND 0x02000000 -+#define RX_PEND 0x04000000 -+#define STS_PEND 0x08000000 -+#define AAL2_PEND 0x10000000 -+#define INT_PENDING (TXH_PEND | TXL_PEND | RX_PEND | STS_PEND | AAL2_PEND) -+#define STS_PEND_INVEC 0x0001F000 -+#define RX_PEND_INVEC 0x00000F00 -+#define TXL_PEND_INVEC 0x000000F0 -+#define TXH_PEND_INVEC 0x0000000F -+#define AIS_SEG_MASK 0x1 /* +01.02.00 */ -+#define AIS_SEG_SHIFT 0 /* +01.02.00 */ -+#define AIS_ETOE_MASK 0x20000 /* +01.02.00 */ -+#define AIS_ETOE_SHIFT 17 /* +01.02.00 */ -+#define RDI_CNT_MASK 0xffff0000 /* +01.02.00 */ -+#define RDI_CNT_SHIFT 16 /* +01.02.00 */ -+ -+/* -+ * This function takes a vpi/vci pair and computes the 4 byte atm header -+ * (minus the HEC). -+ * -+ * @param vpi Virtual Path Identifier. -+ * @param vci Virtual Channel Identifier. -+ * -+ * @return A properly formatted ATM header, without the HEC. -+ */ -+static int atmheader(int gfc, int vpi, int vci, int pti, int clp) -+ { -+ int itmp; -+ -+ itmp=0; -+ -+ /* UNI Mode uses the GFC field */ -+ itmp |= ((gfc & 0xF) << 28); -+ itmp |= ((vpi & 0xFF) << 20); -+ -+ /* if NNI Mode, no gfc and larger VPI */ -+ /*itmp |= ((vpi & 0xFFF) << 20);*/ -+ -+ itmp|=((vci & 0xFFFF) << 4); -+ itmp|=((pti & 0x7) << 1); -+ itmp|=(clp & 0x1); -+ return(itmp); -+ } -+ -+#include "cppi_cpaal5.c" -+ -+/* -+ * Re-entrancy Issues -+ * In order to ensure successful re-entrancy certain sections of the -+ * CPHAL code will be bracketed as Critical. -+ * The OS will provide the function Os.CriticalSection(BOOL), which -+ * will be passed a TRUE to enter the Critical Section and FALSE to exit. -+ */ -+ -+/* -+ * @ingroup CPHAL_Functions -+ * Clears the statistics information. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 OK, Non-zero not OK -+ */ -+static int StatsClear(HAL_DEVICE *HalDev) -+ { -+ int i; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]StatsClear(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* clear stats */ -+ for (i=0; i<NUM_AAL5_CHAN; i++) -+ { -+ HalDev->Stats.CrcErrors[i]=0; -+ HalDev->Stats.LenErrors[i]=0; -+ HalDev->Stats.DmaLenErrors[i]=0; -+ HalDev->Stats.AbortErrors[i]=0; -+ HalDev->Stats.StarvErrors[i]=0; -+ HalDev->Stats.TxMisQCnt[i][0]=0; -+ HalDev->Stats.TxMisQCnt[i][1]=0; -+ HalDev->Stats.RxMisQCnt[i]=0; -+ HalDev->Stats.RxEOQCnt[i]=0; -+ HalDev->Stats.TxEOQCnt[i][0]=0; -+ HalDev->Stats.TxEOQCnt[i][1]=0; -+ HalDev->Stats.RxPacketsServiced[i]=0; -+ HalDev->Stats.TxPacketsServiced[i][0]=0; -+ HalDev->Stats.TxPacketsServiced[i][1]=0; -+ HalDev->Stats.TxMaxServiced[i][0]=0; -+ HalDev->Stats.TxMaxServiced[i][1]=0; -+ } -+ HalDev->Stats.RxTotal=0; -+ HalDev->Stats.TxTotal=0; -+ HalDev->Stats.RxMaxServiced=0; -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * Returns statistics information. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 -+ */ -+/* -+static STAT_INFO* StatsGet(HAL_DEVICE *HalDev) -+ { -+ STAT_INFO* MyStats = &HalDev->Stats; -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]StatsGet(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ dbgPrintf("HAL Stats:\n"); -+ DispStat(HalDev, "Rx Total",MyStats->RxTotal); -+ DispStat(HalDev, "Tx Total",MyStats->TxTotal); -+ DispStat(HalDev, "Rx Peak",MyStats->RxMaxServiced); -+ DispStat(HalDev, "TxH Peak",MyStats->TxMaxServiced[0][0]); -+ DispStat(HalDev, "TxL Peak",MyStats->TxMaxServiced[0][1]); -+ DispChStat(HalDev, "CrcErr",&MyStats->CrcErrors[0],1); -+ DispChStat(HalDev, "LenErr",&MyStats->LenErrors[0],1); -+ DispChStat(HalDev, "DmaLenErr",&MyStats->DmaLenErrors[0],1); -+ DispChStat(HalDev, "AbortErr",&MyStats->AbortErrors[0],1); -+ DispChStat(HalDev, "StarvErr",&MyStats->StarvErrors[0],1); -+ DispChStat(HalDev, "TxH MisQ Cnt",&MyStats->TxMisQCnt[0][0],2); -+ DispChStat(HalDev, "TxL MisQ Cnt",&MyStats->TxMisQCnt[0][1],2); -+ DispChStat(HalDev, "Rx MisQ Cnt",&MyStats->RxMisQCnt[0],1); -+ DispChStat(HalDev, "Rx EOQ Cnt",&MyStats->RxEOQCnt[0],1); -+ DispChStat(HalDev, "TxH EOQ Cnt",&MyStats->TxEOQCnt[0][0],2); -+ DispChStat(HalDev, "TxL EOQ Cnt",&MyStats->TxEOQCnt[0][1],2); -+ DispChStat(HalDev, "Rx Pkts",&MyStats->RxPacketsServiced[0],1); -+ DispChStat(HalDev, "TxH Pkts",&MyStats->TxPacketsServiced[0][0],2); -+ DispChStat(HalDev, "TxL Pkts",&MyStats->TxPacketsServiced[0][1],2); -+ -+ return (&HalDev->Stats); -+ } -+*/ -+ -+#ifdef __CPHAL_DEBUG -+void dbgChannelConfigDump(HAL_DEVICE *HalDev, int Ch) -+ { -+ CHANNEL_INFO *HalCh = &HalDev->ChData[Ch]; -+ dbgPrintf(" [aal5 Inst %d, Ch %d] Config Dump:\n", HalDev->Inst, Ch); -+ dbgPrintf(" TxNumBuffers :%08d, TxNumQueues :%08d\n", -+ HalCh->TxNumBuffers, HalCh->TxNumQueues); -+ dbgPrintf(" RxNumBuffers :%08d, RxBufSize :%08d\n", -+ HalCh->RxNumBuffers, HalCh->RxBufSize); -+ dbgPrintf(" TxServiceMax :%08d, RxServiceMax:%08d\n", -+ HalCh->TxServiceMax, HalCh->RxServiceMax); -+ dbgPrintf(" RxBufferOffset:%08d, DaMask :%08d\n", -+ HalCh->RxBufferOffset, HalCh->DaMask); -+ dbgPrintf(" CpcsUU :%08d, Gfc :%08d\n", -+ HalCh->CpcsUU, HalCh->Gfc); -+ dbgPrintf(" Clp :%08d, Pti :%08d\n", -+ HalCh->Clp, HalCh->Pti); -+ dbgPrintf(" Priority :%08d, PktType :%08d\n", -+ HalCh->Priority, HalCh->PktType); -+ dbgPrintf(" Vci :%08d, Vpi :%08d\n", -+ HalCh->Vci, HalCh->Vpi); -+ dbgPrintf(" TxVc_CellRate :%08d, TxVc_QosType:%08d\n", -+ HalCh->TxVc_CellRate, HalCh->TxVc_QosType); -+ dbgPrintf(" TxVc_Mbs :%08d, TxVc_Pcr :%08d\n", -+ HalCh->TxVc_Mbs, HalCh->TxVc_Pcr); -+ dbgPrintf(" TxVc_AtmHeader:%08d\n", -+ HalCh->TxVc_AtmHeader); -+ osfuncSioFlush(); -+ } -+#endif -+ -+/* -+ * Retrieves channel parameters from configuration file. Any parameters -+ * which are not found are ignored, and the HAL default value will apply, -+ * unless a new value is given through the channel structure in the call -+ * to ChannelSetup. -+ */ -+static int ChannelConfigGet(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn) -+ { -+ unsigned int Ret, Value, Ch = HalChn->Channel; -+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc; -+ void *ChInfo; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ChannelConfigGet(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalChn); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ Ret=OsFunc->DeviceFindParmValue(HalDev->DeviceInfo, channel_names[Ch], &ChInfo); -+ if (Ret) return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_INFO_NOT_FOUND); -+ -+ /* i don't care if a value is not found because they are optional */ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumBuffers", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxNumBuffers = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxNumQueues", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxNumQueues = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxServiceMax", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxServiceMax = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxNumBuffers", &Value); -+ if (!Ret) HalDev->ChData[Ch].RxNumBuffers = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufferOffset", &Value); -+ if (!Ret) HalDev->ChData[Ch].RxBufferOffset = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxBufSize", &Value); -+ if (!Ret) HalDev->ChData[Ch].RxBufSize = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "RxServiceMax", &Value); -+ if (!Ret) HalDev->ChData[Ch].RxServiceMax = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "CpcsUU", &Value); -+ if (!Ret) HalDev->ChData[Ch].CpcsUU = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Gfc", &Value); -+ if (!Ret) HalDev->ChData[Ch].Gfc = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Clp", &Value); -+ if (!Ret) HalDev->ChData[Ch].Clp = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Pti", &Value); -+ if (!Ret) HalDev->ChData[Ch].Pti = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "DaMask", &Value); -+ if (!Ret) HalDev->ChData[Ch].DaMask = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Priority", &Value); -+ if (!Ret) HalDev->ChData[Ch].Priority = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "PktType", &Value); -+ if (!Ret) HalDev->ChData[Ch].PktType = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vci", &Value); -+ if (!Ret) HalDev->ChData[Ch].Vci = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "Vpi", &Value); -+ if (!Ret) HalDev->ChData[Ch].Vpi = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_CellRate", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxVc_CellRate = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_QosType", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxVc_QosType = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Mbs", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxVc_Mbs = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_Pcr", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxVc_Pcr = Value; -+ -+ Ret=OsFunc->DeviceFindParmUint(ChInfo, "TxVc_AtmHeader", &Value); -+ if (!Ret) HalDev->ChData[Ch].TxVc_AtmHeader = Value; -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * Sets up channel parameters in the hardware, and initializes the CPPI -+ * TX and RX buffer descriptors and buffers. -+ */ -+static int ChannelConfigApply(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn) -+ { -+ int j, Ch = HalChn->Channel; -+ volatile bit32u *pTmp; -+ int Ret; /* +GSG 030410 */ -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ChannelConfigApply(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalChn); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN); -+ } -+ -+ HalDev->InRxInt[Ch]=FALSE; -+ -+ /* Initialize Queue Data */ -+ HalDev->RxActQueueHead[Ch]=0; -+ HalDev->RxActQueueCount[Ch]=0; -+ HalDev->TxActQueueHead[Ch][0]=0; -+ HalDev->TxActQueueHead[Ch][1]=0; -+ HalDev->TxActQueueCount[Ch][0]=0; -+ HalDev->TxActQueueCount[Ch][1]=0; -+ HalDev->RxActive[Ch] = FALSE; -+ HalDev->TxActive[Ch][0] = FALSE; -+ HalDev->TxActive[Ch][1] = FALSE; -+ -+ /* Clear Rx State RAM */ -+ pTmp = pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64); -+ for (j=0; j<NUM_RX_STATE_WORDS; j++) -+ *pTmp++ = 0; -+ -+ /* Check that Rx DMA State RAM was cleared */ -+ pTmp -= NUM_RX_STATE_WORDS; -+ for (j=0; j<NUM_RX_STATE_WORDS; j++) -+ { -+ if (*pTmp++ != 0) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_RX_STATE_RAM_NOT_CLEARED); -+ } -+ } -+ -+ /* Clear Tx State RAM */ -+ pTmp = pTX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64); -+ for (j=0; j<NUM_TX_STATE_WORDS; j++) -+ *pTmp++ = 0; -+ -+ /* Check that Tx DMA State RAM was cleared */ -+ pTmp -= NUM_TX_STATE_WORDS; -+ for (j=0; j<NUM_TX_STATE_WORDS; j++) -+ { -+ if (*pTmp++ != 0) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_TX_STATE_RAM_NOT_CLEARED); -+ } -+ } -+ -+ /* Initialize Tx State RAM (Nothing to do) */ -+ -+ /* Initialize Rx State RAM */ -+ /* Configure the Rx buffer offset */ -+ pTmp=(pRX_DMA_STATE_WORD_0(HalDev->dev_base) + (Ch*64)); -+ *pTmp |= (HalDev->ChData[Ch].RxBufferOffset & 0xFF); -+ -+ /* Initialize buffer memory for the channel */ -+ Ret = InitTcb(HalDev, Ch); -+ if (Ret) return (Ret); -+ -+ Ret = InitRcb(HalDev, Ch); -+ if (Ret) return (Ret); -+ -+ /* setup interrupt mask/enable for the channel */ -+ SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch); -+ -+ /* if using the low priority queue, set up mask for it */ -+ if (HalDev->ChData[Ch].TxNumQueues == 2) /* +GSG 030421 */ -+ SAR_TX_MASK_SET(HalDev->dev_base) = (1<<Ch)<<16; /* +GSG 030421 */ -+ -+ SAR_RX_MASK_SET(HalDev->dev_base) = (1<<Ch); -+ -+ /* call SAR layer to complete the channel setup - hardware configuration of ch */ -+ Ret = HalDev->SarFunc->ChannelSetup(HalDev->SarDev, &HalDev->ChData[Ch]); /* ~GSG 030410 */ -+ if (Ret) /* +GSG 030410 */ -+ return (Ret); /* +GSG 030410 */ -+ -+ /* channel officially open for business */ -+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = TRUE; -+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = TRUE; -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * Sets up HAL default channel configuration parameter values. -+ */ -+static void ChannelConfigInit(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn) -+ { -+ int Ch = HalChn->Channel; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ChannelConfigInit(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalChn); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ HalDev->ChData[Ch].Channel = Ch; -+ HalDev->ChData[Ch].TxNumBuffers = cfg_tx_num_bufs[Ch]; -+ HalDev->ChData[Ch].RxNumBuffers = cfg_rx_num_bufs[Ch]; -+ HalDev->ChData[Ch].RxBufSize = cfg_rx_buf_size[Ch]; -+ HalDev->ChData[Ch].RxBufferOffset = cfg_rx_buf_offset[Ch]; -+ HalDev->ChData[Ch].TxNumQueues = cfg_tx_num_queues[Ch]; -+ HalDev->ChData[Ch].CpcsUU = cfg_cpcs_uu[Ch]; -+ HalDev->ChData[Ch].DaMask = cfg_da_mask[Ch]; -+ HalDev->ChData[Ch].Priority = cfg_priority[Ch]; -+ HalDev->ChData[Ch].PktType = cfg_pkt_type[Ch]; -+ HalDev->ChData[Ch].Vci = cfg_vci[Ch]; -+ HalDev->ChData[Ch].Vpi = cfg_vpi[Ch]; -+ HalDev->ChData[Ch].TxVc_CellRate = cfg_cell_rate[Ch]; -+ HalDev->ChData[Ch].TxVc_QosType = cfg_qos_type[Ch]; -+ HalDev->ChData[Ch].TxVc_Mbs = cfg_mbs[Ch]; -+ HalDev->ChData[Ch].TxVc_Pcr = cfg_pcr[Ch]; -+ HalDev->ChData[Ch].Gfc = cfg_gfc[Ch]; -+ HalDev->ChData[Ch].Clp = cfg_clp[Ch]; -+ HalDev->ChData[Ch].Pti = cfg_pti[Ch]; -+ HalDev->ChData[Ch].RxServiceMax = cfg_rx_max_service[Ch]; -+ HalDev->ChData[Ch].TxServiceMax = cfg_tx_max_service[Ch]; -+ } -+ -+/* -+ * Update per channel data in the HalDev based channel structure. -+ * If a certain channel parameter has been passed with the HAL_DEFAULT -+ * value (0xFFFFFFFF), then do not copy it. -+ */ -+static void ChannelConfigUpdate(HAL_DEVICE *HalDev, CHANNEL_INFO *HalChn) -+ { -+ int Ch = HalChn->Channel; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ChannelConfigUpdate(HalDev:%08x, HalChn:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalChn); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ HalDev->ChData[Ch].Channel = Ch; -+ -+ /* ChannelUpdate is a macro defined in cpcommon.h. It requires -+ the presence of the variables named 'Ch' and 'HalChn'.*/ -+ ChannelUpdate(DaMask); -+ ChannelUpdate(Priority); -+ ChannelUpdate(PktType); -+ ChannelUpdate(Vci); -+ ChannelUpdate(Vpi); -+ ChannelUpdate(CpcsUU); -+ ChannelUpdate(Gfc); -+ ChannelUpdate(Clp); -+ ChannelUpdate(Pti); -+ /* AAL5 Stuff */ -+ ChannelUpdate(TxNumBuffers); -+ ChannelUpdate(RxNumBuffers); -+ ChannelUpdate(RxBufSize); -+ ChannelUpdate(RxBufferOffset); -+ ChannelUpdate(TxNumQueues); -+ ChannelUpdate(TxServiceMax); -+ ChannelUpdate(RxServiceMax); -+ /* PDSP STATE RAM */ -+ ChannelUpdate(TxVc_CellRate); -+ ChannelUpdate(TxVc_QosType); -+ ChannelUpdate(TxVc_Mbs); -+ ChannelUpdate(TxVc_Pcr); -+ /* OAM */ -+ ChannelUpdate(TxVc_AtmHeader); -+ ChannelUpdate(TxVc_OamTc); -+ ChannelUpdate(TxVc_VpOffset); -+ ChannelUpdate(RxVc_OamCh); -+ ChannelUpdate(RxVc_OamToHost); -+ ChannelUpdate(RxVc_AtmHeader); -+ ChannelUpdate(RxVc_VpOffset); -+ ChannelUpdate(RxVc_OamTc); -+ ChannelUpdate(TxVp_AtmHeader); -+ ChannelUpdate(TxVp_OamTc); -+ ChannelUpdate(RxVp_AtmHeader); -+ ChannelUpdate(RxVp_OamCh); -+ ChannelUpdate(RxVp_OamTc); -+ ChannelUpdate(RxVp_OamToHost); -+ ChannelUpdate(RxVp_OamVcList); -+ ChannelUpdate(FwdUnkVc); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function opens the specified channel. The caller must populate -+ * the @p HalCh structure. CPHAL default values may be requested for any or all -+ * members of the @p HalCh structure by supplying a value of 0xFFFFFFFF for the -+ * given member. The @p OsSetup parameter is a pointer to an OS defined -+ * data structure. If the CPHAL later calls @c MallocRxBuffer(), this pointer -+ * is returned in that call. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param HalCh Per channel information structure. Implementation specific. -+ * @param OsSetup Pointer to an OS-defined data structure. -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_NULL_CH_STRUCT "EC_VAL_NULL_CH_STRUCT"<BR> -+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR> -+ * @ref EC_VAL_CH_ALREADY_OPEN "EC_VAL_CH_ALREADY_OPEN"<BR> -+ * @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR> -+ * @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR> -+ * @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR> -+ */ -+static int halChannelSetup(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup) -+ { -+ int Ch, Ret; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halChannelSetup(HalDev:%08x, HalCh:%08x, OsSetup:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalCh, (bit32u)OsSetup); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state */ -+ if (HalDev->State < enInitialized) -+ return (EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_STATE); -+ -+ /* We require the channel structure to be passed, even if it only contains -+ the channel number */ -+ if (HalCh == NULL) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_NULL_CH_STRUCT); -+ } -+ -+ Ch = HalCh->Channel; -+ -+ if ((Ch < 0) || (Ch > MAX_AAL5_CHAN)) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_INVALID_CH); -+ } -+ -+ /* if channel is already open, this call is invalid */ -+ if ((HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) || (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE)) -+ { -+ return(EC_AAL5|EC_FUNC_CHSETUP|EC_VAL_CH_ALREADY_OPEN); -+ } -+ -+ /* channel is closed, but might be setup. If so, reopen the hardware channel. */ -+ if ((HalDev->ChIsSetup[Ch][DIRECTION_TX] == FALSE) && (HalDev->ChIsSetup[Ch][DIRECTION_RX] == FALSE)) -+ { -+ /* Setup channel configuration */ -+ /* Store OS_SETUP */ -+ HalDev->ChData[Ch].OsSetup = OsSetup; /* ~GSG 030508 */ -+ -+ /* setup HAL default values for this channel first */ -+ ChannelConfigInit(HalDev, HalCh); -+ -+ /* retrieve options.conf channel parameters */ -+ /* currently ignoring return value, making the choice that it's okay if -+ the user does not supply channel configuration in the data store */ -+ ChannelConfigGet(HalDev, HalCh); -+ -+ /* update HalDev with data given in HalCh */ -+ ChannelConfigUpdate(HalDev, HalCh); -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(8)) -+ { -+ dbgChannelConfigDump(HalDev, Ch); -+ } -+#endif -+ -+ /* HalDev->ChIsSetup[Ch][0] = TRUE; */ -+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = TRUE; -+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = TRUE; -+ -+ /* I don't initialize RcbStart or TcbStart here because their values may be -+ reused across several Setup/Teardown calls */ -+ } -+ -+ /* If the hardware has been opened (is out of reset), then configure the channel -+ in the hardware. NOTE: ChannelConfigApply calls the CPSAR ChannelSetup()! */ -+ if (HalDev->State == enOpened) -+ { -+ Ret = ChannelConfigApply(HalDev, HalCh); -+ if (Ret) return (Ret); -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * This function configures the rate at which the OAM timer scheduler -+ * channels will be scheduled. The value of OamRate is the number of -+ * clock ticks between cell transmissions (if OAM function is sourcing -+ * cells), or the number of clock ticks between events or absence of events -+ * (if OAM function is sinking cells). The value of i indicates -+ * which OAM function to apply the rate to. A list is given below. -+ * -+ * @par Oam Function Values -+ * - 0 : Loopback source -+ * - 1 : F4 CC source -+ * - 2 : F5 CC source -+ * - 3 : F4 CC sink -+ * - 4 : F5 CC sink -+ * - 5 : F4 TX AIS source -+ * - 6 : F5 TX AIS source -+ * - 7 : F4 RX RDI source -+ * - 8 : F5 RX RDI source -+ * - 9 : F4 AIS monitor -+ * - 10 : F5 AIS monitor -+ * -+ * The following is information on how to calculate the OAM rate. There -+ * is only one OAM timer that is shared among all channels. Therefore, if -+ * you wanted an OAM source function (ex. F4 CC source) to generate 1 cell/sec -+ * across 8 channels, you would need to configure the OAM timer to schedule 8 -+ * cells/sec. In addition, the credits are shared between segment and end-to-end -+ * type OAM cells, so if you were sending both types of cells, you would -+ * need to configure the OAM timer for 16 cells/sec. However, the clock -+ * rate must be specified in clock ticks between events. Using an example -+ * clock rate of 125 MHz, the rate in clock ticks can be calculated by -+ * dividing 125 Mhz by 16 cells/sec. The results is 7812500 ticks. Thus, -+ * every 7812500 clock cycles, an OAM cell will be generated for the F4 CC -+ * Source function. -+ */ -+static void OamRateConfig(HAL_DEVICE *HalDev) -+ { -+ int i; -+ bit32u OamRate, Freq = HalDev->SarFrequency; -+ -+ /* Configure OAM Timer State Block */ -+ for (i=0; i<NUM_OAM_RATES; i++) -+ { -+ switch(i) -+ { -+ case 0: OamRate = ((Freq/1000)*HalDev->OamLbTimeout); -+ break; -+ case 1: -+ case 2: -+ case 5: -+ case 6: -+ case 7: -+ case 8: OamRate = (Freq/38); -+ break; -+ case 3: -+ case 4: OamRate = ((Freq*3) + (Freq/2))/38; -+ break; -+ case 9: -+ case 10: OamRate = ((Freq*2) + (Freq/2))/38; -+ break; -+ default: OamRate = (Freq*5); -+ break; -+ } -+ -+ *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + (i*64) + 1) = OamRate; -+ } -+ } -+ -+/** -+ * @ingroup AAL5_Functions -+ * This function is used to enable OAM functions (other than loopback) for a -+ * particular channel. The channel (embedded within OamConfig - see below) must -+ * have been configured for firmware OAM (not host OAM) for these configurations -+ * to take effect. More than one function may be enabled at one time. -+ * If more than one function is enabled, they must all be of the same level, all -+ * F4(VP) or all F5(VC). -+ * -+ * The usage of the OamConfig parameter is described through the table below. To -+ * initiate firmware OAM, set one or more bits in OamConfig corresponding to the -+ * various OAM functions. To disable firmware OAM functions, set bit 30 along -+ * with any other combination of bits to shutdown various OAM functions at once. -+ * -+ * Acronyms: -+ * e2e - end to end, seg - segment, CC - continuity check, -+ * AIS - Alarm Indication Signal -+ * -+ * @par Bit: Function: Description -+ * - 31: Reserved: -+ * - 30: Setup/Teardown: 0 - enable, 1 - disable (Note 1) -+ * - 29: F4 CC Source seg: 0 - no action, 1 - configure -+ * - 28: F4 CC Source e2e: 0 - no action, 1 - configure -+ * - 27: F4 AIS Source seg: 0 - no action, 1 - configure -+ * - 26: F4 AIS Source e2e: 0 - no action, 1 - configure -+ * - 25: F5 CC Source seg: 0 - no action, 1 - configure -+ * - 24: F5 CC Source e2e: 0 - no action, 1 - configure -+ * - 23: F5 AIS Source seg: 0 - no action, 1 - configure -+ * - 22: F5 AIS Source e2e: 0 - no action, 1 - configure -+ * - 21: F4 CC Sink seg: 0 - no action, 1 - configure -+ * - 20: F4 CC Sink e2e: 0 - no action, 1 - configure -+ * - 19: F5 CC Sink seg: 0 - no action, 1 - configure -+ * - 18: F5 CC Sink e2e: 0 - no action, 1 - configure -+ * - 17:8: Reserved: -+ * - 7:0: Channel: AAL5/AAL2 VC/VP channel (Note 2) -+ * -+ * -+ * Note 1: This bit must be clear to enable the specified OAM function. -+ * Note 2: This must specify the VC channel for F5 functions, and the VP -+ * channel for F4 functions. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param OamConfig A 32-bit integer field defined as follows: -+ */ -+static void halOamFuncConfig(HAL_DEVICE *HalDev, unsigned int OamConfig) -+ { -+ /* GPR 0 */ -+ SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig; -+ } -+ -+/** -+ * @ingroup AAL5_Functions -+ * This function is used to enable OAM loopback functions for a particular -+ * channel. The channel (embedded within OamConfig - see below) must have been -+ * configured for firmware OAM (not host OAM) for these configurations to take -+ * effect. Only one loopback function can be enabled at a time. -+ * -+ * The LLID is inserted into to the OAM cell's LLID field, and it specifies the -+ * LLID of the connection point in the network where the generated loopback cell -+ * should be turned around. The LLID is composed of 4 32-bit words, and this -+ * function expects the caller to pass an array of 4 words in the LLID field. -+ * The CorrelationTag is a 32-bit word that the PDSP uses to correlate loopback -+ * commands with loopback responses. It should simply be changed for each -+ * call, and there is no restriction on the value used for CorrelationTag. -+ * -+ * The usage of the OamConfig parameter is described through the table below. To -+ * initiate firmware OAM, set one of the bits corresponding to the -+ * various loopback OAM functions. Note that only one loopback source may be -+ * commanded at a time. -+ * -+ * Acronyms: -+ * e2e - end to end, seg - segment, LB - loopback -+ * -+ * @par Bit: Function: Description -+ * - 31:16: Reserved: -+ * - 15: F4 LB Source seg: 0 - no action, 1 - configure (Note 1) -+ * - 14: F4 LB Source seg: 0 - no action, 1 - configure (Note 1) -+ * - 13: F4 LB Source e2e: 0 - no action, 1 - configure (Note 1) -+ * - 12: F4 LB Source e2e: 0 - no action, 1 - configure (Note 1) -+ * - 11:8: Reserved: -+ * - 7:0: Channel: AAL5/AAL2 VC/VP channel (Note 2) -+ * -+ * -+ * Note 1: Only one LB function may be enabled at one time. Once enabled, -+ * the PDSP will time out after 5 seconds. The host must wait until it -+ * has received the result of the current LB request before initiating -+ * a new request. <BR> -+ * Note 2: This must specify the VC channel for F5 functions, and the VP -+ * channel for F4 functions. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param OamConfig A 32-bit integer field defined as follows: -+ * @param LLID Loopback Location Identifier (passed as 4 word array). -+ * Must be configured in big endian format. -+ * @param CorrelationTag 32-bit tag correlates loopback commands with loopback -+ * responses. Must be configured in big endian format. -+ * -+ */ -+static void halOamLoopbackConfig(HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag) -+ { -+ volatile bit32u *tmp; -+ -+ /* test to see if this is a loopback command */ -+ if (OamConfig & 0xf000) -+ { -+ /* write the OAM correlation tag (GPR 1) */ -+ SAR_PDSP_OAM_CORR_REG(HalDev->dev_base) = CorrelationTag; -+ -+ /* write the LLID */ -+ tmp = pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base); -+ -+ /* advance past the CPID */ -+ tmp += 4; -+ -+ *tmp++ = LLID[0]; -+ *tmp++ = LLID[1]; -+ *tmp++ = LLID[2]; -+ *tmp = LLID[3]; -+ -+ /* GPR 0 */ -+ SAR_PDSP_HOST_OAM_CONFIG_REG(HalDev->dev_base) = OamConfig; -+ } -+ } -+ -+/* -+ * This function allows the host software to access any register directly. -+ * Primarily used for debug. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param RegOffset Hexadecimal offset to desired register (from device base addr) -+ * -+ * @return Volatile pointer to desired register. -+ */ -+static volatile bit32u* halRegAccess(HAL_DEVICE *HalDev, bit32u RegOffset) -+ { -+ /* compute the register address */ -+ return ((volatile bit32u *)(HalDev->dev_base + RegOffset)); -+ } -+ -+#ifdef __CPHAL_DEBUG -+static void dbgConfigDump(HAL_DEVICE *HalDev) -+ { -+ dbgPrintf(" AAL5 Inst %d Config Dump:\n", HalDev->Inst); -+ dbgPrintf(" Base :%08x, offset:%08d\n", -+ HalDev->dev_base, HalDev->offset); -+ dbgPrintf(" Interrupt:%08d, debug :%08d\n", -+ HalDev->interrupt, HalDev->debug); -+ osfuncSioFlush(); -+ } -+#endif -+ -+/** -+ * @ingroup CPHAL_Functions -+ * Performs a variety of control functions on the CPHAL module. It is used to -+ * modify/read configuration parameters and to initiate internal functions. -+ * The @p Key indicates the function to perform or the parameter to access (note -+ * that these Keys are identical to those used in accessing the configuration data -+ * store). @p Action is applicable to parameters only, and indicates what the -+ * CPHAL should do with the parameter (i.e. "Set", "Get", etc..). The actions -+ * for each parameter are defined in the module specific documentation. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param Key Key specifying the parameter to change or internal function to initiate. See module specific documentation for available keys. -+ * @param Action Specifies the action to take. See module specific documentation for available actions. -+ * @param Value Pointer to new value for given @p Key parameter ("Set"), or returned value of Key ("Get"). -+ * -+ * @return EC_NO_ERRORS (ok).<BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR> -+ * @ref EC_VAL_ACTION_NOT_FOUND "EC_VAL_ACTION_NOT_FOUND"<BR> -+ */ -+static int halControl(HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value) -+ { -+ int Level, Ch, KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Queue; -+ char *TmpKey = (char *)Key; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev, -+ Key, Action, (bit32u)Value); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state */ -+ if (HalDev->State < enInitialized) -+ return (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_STATE); -+ -+ if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ HalDev->debug = *(int *)Value; -+ /* also setup debug variable in CPSAR module */ -+ rc = HalDev->SarFunc->Control(HalDev->SarDev, "Debug", "Set", Value); -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ HalDev->ChData[Ch].FwdUnkVc = *(int *)Value; -+ -+ if ((HalDev->State == enOpened) && (HalDev->ChData[Ch].PktType == 3)) -+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value); -+ } -+ } -+ -+ /* +GSG 030407 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value); -+ } -+ -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ rc = HalDev->SarFunc->Control(HalDev->SarDev, Key, Action, Value); -+ } -+ } -+ -+ /* +GSG 030307 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "Version") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ *(const char **)Value = pszVersion_CPAAL5; -+ } -+ } -+ -+ /* +GSG 030529 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "TurboDslErrors") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ *(int *)Value = HalDev->TurboDslErrors; -+ } -+ } -+ -+ /* +GSG 030416 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "F4_LB_Counter") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ *(int *)Value = SAR_PDSP_OAM_F4_LB_COUNT_REG(HalDev->dev_base); -+ } -+ } -+ -+ /* +GSG 030416 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "F5_LB_Counter") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ *(int *)Value = SAR_PDSP_OAM_F5_LB_COUNT_REG(HalDev->dev_base); -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "Stats;") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ TmpKey += HalDev->OsFunc->Strlen("Stats;"); -+ Level = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ TmpKey++; -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ TmpKey++; -+ Queue = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ TmpKey++; -+ StatsGet(HalDev, (void **)Value, Level, Ch, Queue); -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "Gfc.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("Gfc."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].Gfc = *(int *)Value; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "Clp.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("Clp."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].Clp = *(int *)Value; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "Pti.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("Pti."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].Pti = *(int *)Value; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "CpcsUU.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("CpcsUU."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].CpcsUU = *(int *)Value; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "TxVc_CellRate.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("TxVc_CellRate."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].TxVc_CellRate = *(int *)Value; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVc_CellRate; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "TxVc_Mbs.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("TxVc_Mbs."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].TxVc_Mbs = *(int *)Value; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)= HalDev->ChData[Ch].TxVc_Mbs; -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "TxVc_AtmHeader.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("TxVc_AtmHeader."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].TxVc_AtmHeader = *(int *)Value; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+6)= HalDev->ChData[Ch].TxVc_AtmHeader; -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "TxVp_AtmHeader.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("TxVp_AtmHeader."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].TxVp_AtmHeader = *(int *)Value; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_TX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64))= HalDev->ChData[Ch].TxVp_AtmHeader; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #100 */ -+ if (HalDev->OsFunc->Strstr(Key, "TxVc_Pcr.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("TxVc_Pcr."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].TxVc_Pcr = *(int *)Value; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_TX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+4)= HalDev->ChData[Ch].TxVc_Pcr; -+ } -+ } -+ -+ /* +GSG 030428 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVc_OamCh.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVc_OamCh."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].RxVc_OamCh = (*(int *)Value) & 0xff; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)) |= HalDev->ChData[Ch].RxVc_OamCh; -+ } -+ } -+ -+ /* +GSG 030428 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVp_OamCh.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVp_OamCh."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* first, store new value in our channel structure */ -+ HalDev->ChData[Ch].RxVp_OamCh = (*(int *)Value) & 0xff; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ *(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1) |= HalDev->ChData[Ch].RxVp_OamCh; -+ } -+ } -+ -+ /* +GSG 030304 */ -+ /* Fixes PITS #98 */ -+ if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* this variable is controlled by the CPSAR module */ -+ if (HalDev->State == enOpened) -+ { -+ rc=HalDev->SarFunc->Control(HalDev->SarDev, "PdspEnable", "Set", Value); -+ } -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "OamLbTimeout") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ HalDev->OamLbTimeout = *(int *)Value; -+ /* this variable is controlled by the CPSAR module */ -+ if (HalDev->State == enOpened) -+ { -+ *(pOAM_TIMER_STATE_WORD_0(HalDev->dev_base) + 1) = -+ ((HalDev->SarFrequency/1000) * HalDev->OamLbTimeout); -+ } -+ } -+ } -+ -+ /* +GSG 030306 (PITS #114) */ -+ if (HalDev->OsFunc->Strstr(Key, "DeviceCPID") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ unsigned int* local = (unsigned int *)Value; -+ ActionFound=1; -+ /* first, store new value in our hal structure */ -+ HalDev->DeviceCPID[0] = local[0]; -+ HalDev->DeviceCPID[1] = local[1]; -+ HalDev->DeviceCPID[2] = local[2]; -+ HalDev->DeviceCPID[3] = local[3]; -+ -+ /* now, apply to PDSP state RAM */ -+ if (HalDev->State == enOpened) -+ { -+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 0) = HalDev->DeviceCPID[0]; -+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 1) = HalDev->DeviceCPID[1]; -+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 2) = HalDev->DeviceCPID[2]; -+ *(bit32u *)(pOAM_CONFIG_BLOCK_WORD_0(HalDev->dev_base) + 3) = HalDev->DeviceCPID[3]; -+ } -+ } -+ } -+ -+ /* +GSG 030304 */ -+ /* Fixes PITS #99 */ -+ if (HalDev->OsFunc->Strstr(Key, "StrictPriority") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* used in halOpen to decide which interrupt handler to use */ -+ HalDev->StrictPriority = *(int *)Value; -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, hcMaxFrags) != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ if ((*(int *)Value) > 0) -+ HalDev->MaxFrags = *(int *)Value; -+ else -+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_INVALID_VALUE); -+ } -+ -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ *(int *)Value = HalDev->MaxFrags; -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVc_RDICount.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) & RDI_CNT_MASK)>>RDI_CNT_SHIFT); -+ } -+ } -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVc_RDICount."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* All sets write 0, this action is a clear only */ -+ if (HalDev->State == enOpened) -+ { -+ (*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64))) &=~ RDI_CNT_MASK; -+ } -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVc_AISseg.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVc_AISseg."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT); -+ } -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVc_AISetoe.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVc_AISetoe."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+3)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT); -+ } -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVp_RDICount.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) & RDI_CNT_MASK)>>RDI_CNT_SHIFT); -+ } -+ } -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVp_RDICount."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* All sets write 0, this action is a clear only */ -+ if (HalDev->State == enOpened) -+ { -+ (*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+1)) &=~ RDI_CNT_MASK; -+ } -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVp_AISseg.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVp_AISseg."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_SEG_MASK)>>AIS_SEG_SHIFT); -+ } -+ } -+ } -+ -+ /* +GSG 030306 */ -+ /* Fixes PITS #103 */ -+ if (HalDev->OsFunc->Strstr(Key, "RxVp_AISetoe.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("RxVp_AISetoe."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* PDSP's Rx VC State word 3 contains the value */ -+ if (HalDev->State == enOpened) -+ { -+ *(int *)Value = (((*(pPDSP_AAL5_RX_VP_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+2)) & AIS_ETOE_MASK)>>AIS_ETOE_SHIFT); -+ } -+ } -+ } -+ -+ if (KeyFound == 0) -+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND); -+ -+ if (ActionFound == 0) -+ rc = (EC_AAL5|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND); -+ -+ return(rc); -+ } -+ -+/* -+ * Sets up HAL default configuration parameter values. -+ */ -+static void ConfigInit(HAL_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* configure some defaults with tnetx7300 values */ -+ HalDev->dev_base = 0xa3000000; -+ HalDev->offset = 0; -+ HalDev->interrupt = 15; -+ HalDev->debug = 0; -+ HalDev->MaxFrags = 46; -+ HalDev->OamLbTimeout = 5000; -+ } -+ -+/* -+ * Retrieve HAL configuration parameter values. -+ */ -+static bit32u ConfigGet(HAL_DEVICE *HalDev) -+ { -+ bit32u Ret; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* get the configuration parameters common to all modules */ -+ Ret = ConfigGetCommon(HalDev); -+ if (Ret) return (EC_AAL5|Ret); -+ -+ /* get AAL5 specific configuration parameters here */ -+ Ret = HalDev->OsFunc->Control(HalDev->OsDev, hcSarFrequency, pszGET, &HalDev->SarFrequency); /* GSG +030416*/ -+ if (Ret) /* GSG +030416*/ -+ HalDev->SarFrequency = 200000000; /* 200 Mhz default */ /* GSG +030416*/ -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function initializes the CPHAL module. It gathers all -+ * necessary global configuration info from the configuration file, and -+ * performs initialization and configuration of the device. Note that -+ * the device operation is not started until the OS calls @c Open(). -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_BASE_ADDR_NOT_FOUND "EC_VAL_BASE_ADDR_NOT_FOUND"<BR> -+ * @ref EC_VAL_RESET_BIT_NOT_FOUND "EC_VAL_RESET_BIT_NOT_FOUND"<BR> -+ * @ref EC_VAL_INTERRUPT_NOT_FOUND "EC_VAL_INTERRUPT_NOT_FOUND"<BR> -+ * @ref EC_VAL_OFFSET_NOT_FOUND "EC_VAL_OFFSET_NOT_FOUND"<BR> -+ */ -+static int halInit(HAL_DEVICE *HalDev) -+ { -+ int i; -+ bit32u error_code; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halInit(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state */ -+ if (HalDev->State != enDevFound) -+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_INVALID_STATE); -+ -+ /* Configure HAL defaults */ -+ ConfigInit(HalDev); -+ -+ /* Retrieve HAL configuration parameters from data store */ -+ error_code = ConfigGet(HalDev); -+ if (error_code) return (error_code); -+ -+ /* Other items (OAM related) that need to be passed in somehow */ -+ HalDev->DeviceCPID[0] = 0xffffffff; -+ HalDev->DeviceCPID[1] = 0xffffffff; -+ HalDev->DeviceCPID[2] = 0xffffffff; -+ HalDev->DeviceCPID[3] = 0xffffffff; -+ HalDev->LBSourceLLID[0] = 0xffffffff; -+ HalDev->LBSourceLLID[1] = 0xffffffff; -+ HalDev->LBSourceLLID[2] = 0xffffffff; -+ HalDev->LBSourceLLID[3] = 0xffffffff; -+ -+ /* Initialize SAR layer*/ -+ error_code = HalDev->SarFunc->Init(HalDev->SarDev); -+ if (error_code) return (error_code); -+ -+ /* Initialize various HalDev members. This is probably overkill, since these -+ are initialized in ChannelSetup() and HalDev is cleared in InitModule(). */ -+ for (i=0; i<NUM_AAL5_CHAN; i++) -+ { -+ HalDev->InRxInt[i]=FALSE; -+ HalDev->ChIsOpen[i][DIRECTION_TX] = FALSE; -+ HalDev->ChIsOpen[i][DIRECTION_RX] = FALSE; -+ HalDev->TcbStart[i][0] = 0; -+ HalDev->TcbStart[i][1] = 0; -+ HalDev->RcbStart[i] = 0; -+ } -+ -+ /* initialize SAR stats */ -+ StatsClear(HalDev); -+ -+ /* init Stat pointers */ -+ -+ /* even though these statistics may be for multiple channels/queues, i need -+ only configure the pointer to the beginning of the array, and I can index -+ from there if necessary */ -+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0]; -+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0]; -+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0]; -+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0]; -+ -+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0]; -+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0]; -+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0]; -+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0]; -+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0]; -+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0]; -+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0]; -+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced; -+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0]; -+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal; -+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal; -+ -+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0]; -+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0]; -+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0]; -+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0]; -+ StatsTable2[4].StatPtr = &HalDev->RxActive[0]; -+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0]; -+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0]; -+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0]; -+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0]; -+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0]; -+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0]; -+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0]; -+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0]; -+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0]; -+ -+ StatsTable4[0].StatPtr = &HalDev->dev_base; -+ StatsTable4[1].StatPtr = &HalDev->offset; -+ StatsTable4[2].StatPtr = &HalDev->interrupt; -+ StatsTable4[3].StatPtr = &HalDev->debug; -+ StatsTable4[4].StatPtr = &HalDev->Inst; -+ -+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize; -+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset; -+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers; -+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax; -+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers; -+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues; -+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax; -+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU; -+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc; -+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp; -+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti; -+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask; -+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority; -+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType; -+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci; -+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi; -+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate; -+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType; -+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs; -+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr; -+ -+ /* update device state */ -+ HalDev->State = enInitialized; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(9)) -+ dbgConfigDump(HalDev); -+#endif -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/* -+ * Use this function to actually send after queuing multiple packets using -+ * Send(). This is a debug only function that should be removed - it was -+ * necessary to properly implement my loopback tests. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param Queue Queue number to kick. -+ * -+ * @return 0 OK, Non-Zero Not OK -+ */ -+static int halKick(HAL_DEVICE *HalDev, int Queue) -+ { -+ int Ch; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halKick(HalDev:%08x. Queue:%d)\n", (bit32u)HalDev, Queue); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ for (Ch = 0; Ch < 16; Ch ++) -+ { -+ if ((!HalDev->TxActive[Ch][Queue]) && (HalDev->TxActQueueHead[Ch][Queue] != 0)) -+ { -+ *(pTX_DMA_STATE_WORD_0(HalDev->dev_base)+(Ch*64)+Queue)= -+ VirtToPhys(HalDev->TxActQueueHead[Ch][Queue]); -+ HalDev->TxActive[Ch][Queue]=TRUE; -+ } -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* +GSG 030305 For PITS #99 -+ * Alternate interrupt handler that uses the INT_VECTOR in order to -+ * provide strict priority handling among channels, beginning with Ch 0. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param MoreWork (Output) When set to 1, indicates that there is more work to do. -+ * Caller should ensure that the value pointed at is set to 0 -+ * prior to the call. -+ * @return 0 OK, non-zero error. -+ */ -+static int DeviceIntAlt(HAL_DEVICE *HalDev, int *MoreWork) -+ { -+ int tmp, Ch, WorkFlag; -+ bit32u rc; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]DeviceIntAlt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state - important because a call prior to Open would -+ result in a lockup */ -+ if (HalDev->State != enOpened) -+ return(EC_AAL5|EC_FUNC_DEVICE_INT_ALT|EC_VAL_INVALID_STATE); -+ -+ if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) -+ { -+ /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]); -+ HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */ -+ -+ if (tmp&TXH_PEND) -+ { -+ /* decide which channel to service */ -+ Ch = (SAR_INTR_VECTOR(HalDev->dev_base) & TXH_PEND_INVEC); -+ -+ rc = TxInt(HalDev,Ch,0,&WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&TXL_PEND) -+ { -+ /* decide which channel to service */ -+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & TXL_PEND_INVEC) >> 4); -+ -+ rc = TxInt(HalDev,Ch,1,&WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&RX_PEND) -+ { -+ /* decide which channel to service */ -+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & RX_PEND_INVEC) >> 8); -+ -+ rc = RxInt(HalDev,Ch,&WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&STS_PEND) -+ { -+ /* GPR 2 code added for PITS 103 */ -+ /* determine interrupt source */ -+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12); -+ -+ /* only if this is GPR 2 interrupt do we take action */ -+ if (Ch == 26) -+ { -+ /* pass loopback result back to OS */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set", -+ (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); -+ } -+ -+ /* clear the interrupt */ -+ SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000; -+ } -+ -+ if (tmp&AAL2_PEND) -+ { -+ /* no action defined */ -+ } -+ -+ SAR_INTR_VECTOR(HalDev->dev_base) = 0; -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * Called to service a module interrupt. This function determines -+ * what type of interrupt occurred and dispatches the correct handler. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param MoreWork (Output) When set to 1, indicates that there is more work to do. -+ * Caller should ensure that the value pointed at is set to 0 -+ * prior to the call. -+ * @return 0 OK, non-zero error. -+ */ -+static int DeviceInt(HAL_DEVICE *HalDev, int *MoreWork) -+ { -+ /*static int NextRxCh=0; -+ static int NextTxCh[2]={0,0};*/ -+ -+ int tmp, Ch, FirstCh, WorkFlag; -+ int NextTxLCh, NextTxHCh, NextRxCh; -+ bit32u rc; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]DeviceInt(HalDev:%08x, MoreWork:%08x)\n", (bit32u)HalDev, (bit32u)MoreWork); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state - important because a call prior to Open would -+ result in a lockup */ -+ if (HalDev->State != enOpened) -+ return(EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_INVALID_STATE); -+ -+ NextTxHCh = HalDev->NextTxCh[0]; -+ NextTxLCh = HalDev->NextTxCh[1]; -+ NextRxCh = HalDev->NextRxCh; -+ -+ /* service interrupts while there is more work to do */ -+ /*while (((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) && (TotalPkts < 500))*/ -+ if ((tmp=SAR_INTR_VECTOR(HalDev->dev_base))&INT_PENDING) -+ { -+ /*printf("\015 %d RxQ",HalDev->RxActQueueCount[0]); -+ HalDev->OsFunc->Control(HalDev->OsDev, enSIO_FLUSH, enNULL, 0); */ -+ -+ if (tmp&TXH_PEND) -+ { -+ /* decide which channel to service */ -+ FirstCh = NextTxHCh; -+ while (1) -+ { -+ Ch = NextTxHCh++; -+ if (NextTxHCh == 16) -+ NextTxHCh = 0; -+ if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<Ch)) -+ break; -+ if (FirstCh == NextTxHCh) -+ { -+ /* we checked every channel and still haven't found anything to do */ -+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXH_WORK_TO_DO); -+ } -+ } -+ -+ rc = TxInt(HalDev,Ch,0,&WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&TXL_PEND) -+ { -+ /* decide which channel to service */ -+ FirstCh = NextTxLCh; -+ while (1) -+ { -+ Ch = NextTxLCh++; -+ if (NextTxLCh == 16) -+ NextTxLCh = 0; -+ if (SAR_TX_MASKED_STATUS(HalDev->dev_base) & (1<<(Ch+16))) -+ break; -+ if (FirstCh == NextTxLCh) -+ { -+ /* we checked every channel and still haven't found anything to do */ -+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_TXL_WORK_TO_DO); -+ } -+ } -+ -+ rc = TxInt(HalDev,Ch,1,&WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&RX_PEND) -+ { -+ FirstCh = NextRxCh; -+ while (1) -+ { -+ Ch = NextRxCh++; -+ if (NextRxCh == 16) -+ NextRxCh = 0; -+ if (SAR_RX_MASKED_STATUS(HalDev->dev_base) & (1 << Ch)) -+ break; /* found a channel to service */ -+ if (FirstCh == NextRxCh) -+ { -+ /* we checked every channel and still haven't found anything to do */ -+ return (EC_AAL5|EC_FUNC_DEVICE_INT|EC_VAL_NO_RX_WORK_TO_DO); -+ } -+ } -+ -+ rc = RxInt(HalDev,Ch, &WorkFlag); -+ if (rc) return (rc); -+ -+ if (WorkFlag == 1) -+ *MoreWork = 1; -+ } -+ -+ if (tmp&STS_PEND) -+ { -+ /* +GSG 030305 */ -+ /* GPR 2 code added for PITS 103 */ -+ /* determine interrupt source */ -+ Ch = ((SAR_INTR_VECTOR(HalDev->dev_base) & STS_PEND_INVEC) >> 12); -+ -+ /* only if this is GPR 2 interrupt do we take action */ -+ if (Ch == 26) -+ { -+ /* pass loopback result back to OS */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "OamLbResult", "Set", -+ (bit32u *)pSAR_PDSP_OAM_LB_RESULT_REG(HalDev->dev_base)); -+ } -+ -+ /* clear the interrupt */ -+ SAR_STATUS_CLR_REG(HalDev->dev_base) |= 0x04000000; -+ } -+ -+ if (tmp&AAL2_PEND) -+ { -+ /* no action defined */ -+ } -+ -+ SAR_INTR_VECTOR(HalDev->dev_base) = 0; -+ } -+ -+ HalDev->NextTxCh[0] = NextTxHCh; -+ HalDev->NextTxCh[1] = NextTxLCh; -+ HalDev->NextRxCh = NextRxCh; -+ -+ /* This must be done by the upper layer */ -+ /* SAR_EOI(HalDev->dev_base) = 0; */ -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function starts the operation of the CPHAL device. It takes the device -+ * out of reset, and calls @c IsrRegister(). This function should be called after -+ * calling the @c Init() function. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok).<BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_KEY_NOT_FOUND "EC_VAL_KEY_NOT_FOUND"<BR> -+ * @ref EC_VAL_FIRMWARE_TOO_LARGE "EC_VAL_FIRMWARE_TOO_LARGE"<BR> -+ * @ref EC_VAL_PDSP_LOAD_FAIL "EC_VAL_PDSP_LOAD_FAIL"<BR> -+ * @ref EC_VAL_RX_STATE_RAM_NOT_CLEARED "EC_VAL_RX_STATE_RAM_NOT_CLEARED"<BR> -+ * @ref EC_VAL_TX_STATE_RAM_NOT_CLEARED "EC_VAL_TX_STATE_RAM_NOT_CLEARED"<BR> -+ * @ref EC_VAL_TCB_MALLOC_FAILED "EC_VAL_TCB_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_RCB_MALLOC_FAILED "EC_VAL_RCB_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_RX_BUFFER_MALLOC_FAILED "EC_VAL_RX_BUFFER_MALLOC_FAILED"<BR> -+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR> -+ */ -+static int halOpen(HAL_DEVICE *HalDev) -+ { -+ int i,Ret; -+ bit32 SarBase = HalDev->dev_base; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halOpen(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state */ -+ if (HalDev->State < enInitialized) -+ return (EC_AAL5|EC_FUNC_OPEN|EC_VAL_INVALID_STATE); -+ -+ /* Open the SAR (this brings the whole device out of reset */ -+ Ret = HalDev->SarFunc->Open(HalDev->SarDev); /* ~GSG 030410 */ -+ if (Ret) /* +GSG 030410 */ -+ return (Ret); /* +GSG 030410 */ -+ -+ /* Change device state */ -+ HalDev->State = enOpened; -+ -+ -+#ifdef __CPHAL_DEBUG -+ /* print out the version information */ -+ if (DBG(7)) -+ { -+ dbgPrintf("[aal5 halOpen()]Module ID(AAL5-CPSAR):%d, Version:%2d.%02d\n", -+ (SAR_ID_REG(SarBase)&0xffff0000)>>16, -+ (SAR_ID_REG(SarBase)&0xff00)>>8, -+ SAR_ID_REG(SarBase)&0xff); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* GREG 11/1/02: The State RAM clearing code was previously in cpsar.c, -+ directly after device reset. I moved it here because I believe it is -+ AAL5 specific code. Also the MAX_CHAN was set to 19 in cpsar.c, which -+ would have caused this code to clear too much memory! */ -+ -+ /* NOTE: State RAM must be cleared prior to initializing the PDSP!! */ -+ -+ /* GSG 030416: Removed all of this. All PDSP State RAM is cleared -+ in CPSAR Open(). On Close(), all channels are torndown, thus all -+ AAL5 channel state RAM is cleared. */ -+ -+ /* Clear Rx State RAM */ -+ /*for (i=0; i<NUM_AAL5_CHAN; i++) -+ for (j=0; j<NUM_RX_STATE_WORDS; j++) -+ *(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; */ -+ -+ /* Check that Rx DMA State RAM was cleared */ -+ /*for (i=0; i<NUM_AAL5_CHAN; i++) -+ for (j=0; j<NUM_RX_STATE_WORDS; j++) -+ { -+ if (*(pRX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0) -+ { -+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_RX_STATE_RAM_NOT_CLEARED); -+ } -+ }*/ -+ -+ /* Clear Tx State RAM */ -+ /*for (i=0; i<NUM_AAL5_CHAN; i++) -+ for (j=0; j<NUM_TX_STATE_WORDS; j++) -+ { -+ *(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) = 0; -+ }*/ -+ -+ /* Check that Tx DMA State RAM was cleared */ -+ /*for (i=0; i<NUM_AAL5_CHAN; i++) -+ for (j=0; j<NUM_TX_STATE_WORDS; j++) -+ { -+ if (*(pTX_DMA_STATE_WORD_0(SarBase) + (i*64) + j) != 0) -+ { -+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_TX_STATE_RAM_NOT_CLEARED); -+ } -+ }*/ -+ -+ /* GSG +030523 Malloc space for the Rx fraglist */ -+ HalDev->fraglist = HalDev->OsFunc->Malloc(HalDev->MaxFrags * sizeof(FRAGLIST)); -+ -+ /* For any channels that have been pre-initialized, set them up now */ -+ for (i=0; i<NUM_AAL5_CHAN; i++) -+ { -+ if ((HalDev->ChIsSetup[i][0]==TRUE) && (HalDev->ChIsOpen[i][0]==FALSE)) -+ { -+ CHANNEL_INFO HalChn; -+ HalChn.Channel = i; -+ Ret = ChannelConfigApply(HalDev, &HalChn); -+ if (Ret) return (Ret); -+ } -+ } -+ -+ /* OAM code would be a candidate to go into ConfigApply */ -+ -+ /* Configure OAM Timer State Block */ -+ OamRateConfig(HalDev); /* +GSG 030416 */ -+ -+ /* Setup OAM Configuration Block */ -+ for (i=0; i<8; i++) /* ~GSG 030603 4->8 */ -+ { -+ if (i < 4) -+ *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->DeviceCPID[i]; -+ else -+ *(pOAM_CONFIG_BLOCK_WORD_0(SarBase) + i) = HalDev->LBSourceLLID[i-4]; -+ } -+ -+ /* Setup OAM Padding Block */ -+ for (i=0; i<12; i++) -+ { -+ *(pOAM_PADDING_BLOCK_WORD_0(SarBase) + i) = ((i==11)?0x6a6a0000:0x6a6a6a6a); -+ } -+ -+ /* Enable Tx CPPI DMA */ -+ TX_CPPI_CTL_REG(HalDev->dev_base) = 1; -+ -+ /* Enable Rx CPPI DMA */ -+ RX_CPPI_CTL_REG(HalDev->dev_base) = 1; -+ -+ /* +GSG 030306 */ -+ /* Fix for PITS 103 */ -+ /* Enable Host Interrupt for GPR 2 (OAM LB result register) */ -+ SAR_HOST_INT_EN_SET_REG(HalDev->dev_base) |= 0x04000000; -+ -+ /* +GSG 030304 to fix PITS 99 (if block is new)*/ -+ if (HalDev->StrictPriority == 1) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(1)) -+ { -+ dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n", -+ (bit32u)HalDev->OsDev, (bit32u)DeviceIntAlt, HalDev->interrupt); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* "register" the interrupt handler */ -+ HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceIntAlt, HalDev->interrupt); -+ } -+ else /* +GSG 030306 */ -+ { /* +GSG 030306 */ -+#ifdef __CPHAL_DEBUG -+ if (DBG(1)) -+ { -+ dbgPrintf("[aal5->os]IsrRegister(OsDev:%08x, halIsr:%08x, Interrupt:%d)\n", -+ (bit32u)HalDev->OsDev, (bit32u)DeviceInt, HalDev->interrupt); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* "register" the interrupt handler */ -+ HalDev->OsFunc->IsrRegister(HalDev->OsDev, DeviceInt, HalDev->interrupt); -+ } /* +GSG 030306 */ -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * Called to retrigger the interrupt mechanism after packets have been -+ * processed. Call this function when the HalISR function indicates that -+ * there is no more work to do. Proper use of this function will guarantee -+ * that interrupts are never missed. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ */ -+static int halPacketProcessEnd(HAL_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halPacketProcessEnd(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ SAR_EOI(HalDev->dev_base) = 0; -+ return (EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function probes for the instance of the CPHAL module. It will call -+ * the OS function @c DeviceFindInfo() to get the information required. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_DEVICE_NOT_FOUND "EC_VAL_DEVICE_NOT_FOUND"<BR> -+ */ -+static int halProbe(HAL_DEVICE *HalDev) -+ { -+ int Ret; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halProbe(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify hardware state is "enConnected */ -+ if (HalDev->State != enConnected) -+ return (EC_AAL5|EC_FUNC_PROBE|EC_VAL_INVALID_STATE); -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(1)) -+ { -+ dbgPrintf("[aal5->os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n", -+ HalDev->Inst, "aal5", (bit32u)&HalDev->DeviceInfo); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Attempt to find the device information */ -+ Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "aal5", &HalDev->DeviceInfo); -+ if (Ret) -+ return(EC_AAL5|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND); -+ -+ /* Call Probe for supporting CPSAR layer */ -+ Ret = HalDev->SarFunc->Probe(HalDev->SarDev); -+ if (Ret) -+ return(Ret); -+ -+ /* Set device state to DevFound */ -+ HalDev->State = enDevFound; -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function shuts down the CPHAL module completely. The caller must call -+ * Close() to put the device in reset prior shutting down. This call will free -+ * the HalDev and the HAL function pointer structure, effectively ending -+ * communications between the driver and the CPHAL. Further use of the module -+ * must be initiated by a call to xxxInitModule(), which starts the entire process -+ * over again. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * Any error code from halClose().<BR> -+ */ -+static int halShutdown(HAL_DEVICE *HalDev) -+ { -+ int Ch, Queue; /*GSG+030514*/ -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halShutdown(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Verify proper device state */ -+ if (HalDev->State == enOpened) -+ halClose(HalDev, 3); /*GSG+030429*/ -+ -+ /* Buffer/descriptor resources may still need to be freed if a Close -+ Mode 1 was performed prior to Shutdown - clean up here */ /*GSG+030514*/ -+ for (Ch=0; Ch<NUM_AAL5_CHAN; Ch++) -+ { -+ if (HalDev->RcbStart[Ch] != 0) -+ FreeRx(HalDev,Ch); -+ -+ for(Queue=0; Queue<MAX_QUEUE; Queue++) -+ { -+ if (HalDev->TcbStart[Ch][Queue] != 0) -+ FreeTx(HalDev,Ch,Queue); -+ } -+ } -+ -+ /* shutdown the CPSAR layer */ -+ HalDev->SarFunc->Shutdown(HalDev->SarDev); -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(6)) -+ { -+ dbgPrintf(" [aal5 halShutdown()]Free AAL5 function pointers\n"); -+ osfuncSioFlush(); -+ } -+ if (DBG(1)||DBG(3)) -+ { -+ dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr); -+ osfuncSioFlush(); -+ } -+#endif -+ /* free the HalFunc */ -+ HalDev->OsFunc->Free(HalDev->HalFuncPtr); -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(6)) -+ { -+ dbgPrintf(" [aal5 halShutdown]Free HalDev\n"); -+ osfuncSioFlush(); -+ } -+ if (DBG(1)||DBG(3)) -+ { -+ dbgPrintf("[aal5->os]Free(MemPtr:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ /* free the HAL device */ -+ HalDev->OsFunc->FreeDev(HalDev); -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * Used to perform regular checks on the device. This function should be -+ * called at a regular interval specified by the @c Tick parameter. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return EC_NO_ERRORS (ok).<BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ */ -+static int halTick(HAL_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[aal5]halTick(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ if (HalDev->State != enOpened) -+ return(EC_AAL5|EC_FUNC_TICK|EC_VAL_INVALID_STATE); -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * -+ * This function will: -+ * -# allocate a HalDev that will be used by the OS for future communications with the device -+ * -# save OsDev for use when calling OS functions -+ * -# allocate and populate HalFunc with the addresses of CPHAL functions. -+ * -# check OsFuncSize to see if it meets the minimum requirement. -+ * -# return the size of the HAL_FUNCTIONS structure through the HalFuncSize pointer. The OS -+ * should check this value to ensure that the HAL meets its minimum requirement. -+ * -+ * Version checking between the OS and the CPHAL is done using the OsFuncSize and -+ * HalFuncSize. Future versions of the CPHAL may add new functions to either -+ * HAL_FUNCTIONS or OS_FUNCTIONS, but will never remove functionality. This enables -+ * both the HAL and OS to check the size of the function structure to ensure that -+ * the current OS and CPHAL are compatible. -+ * -+ * Note: This is the only function exported by a CPHAL module. -+ * -+ * Please refer to the section "@ref hal_init" for example code. -+ * -+ * @param HalDev Pointer to pointer to CPHAL module information. This will -+ * be used by the OS when communicating to this module via -+ * CPHAL. Allocated during the call. -+ * @param OsDev Pointer to OS device information. This will be saved by -+ * the CPHAL and returned to the OS when required. -+ * @param HalFunc Pointer to pointer to structure containing function pointers for all CPHAL -+ * interfaces. Allocated during the call. -+ * @param OsFunc Pointer to structure containing function pointers for all OS -+ * provided interfaces. Must be allocated by OS prior to call. -+ * @param OsFuncSize Size of OS_FUNCTIONS structure. -+ * @param HalFuncSize Pointer to the size of the HAL_FUNCTIONS structure. -+ * @param Inst The instance number of the module to initialize. (start at -+ * 0). -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_OS_VERSION_NOT_SUPPORTED "EC_VAL_OS_VERSION_NOT_SUPPORTED"<BR> -+ * @ref EC_VAL_MALLOC_DEV_FAILED "EC_VAL_MALLOC_DEV_FAILED"<BR> -+ * @ref EC_VAL_MALLOC_FAILED "EC_VAL_MALLOC_FAILED"<BR> -+ */ -+int xxxInitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+ -+int cpaal5InitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst) -+ { -+ int rc, SarFuncSize; -+ HAL_DEVICE *HalPtr; -+ HAL_FUNCTIONS *HalFuncPtr; -+ -+ /* NEW CODE */ -+ if (OsFuncSize < sizeof(OS_FUNCTIONS)) -+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_OS_VERSION_NOT_SUPPORTED); -+ -+ HalPtr = (HAL_DEVICE *) OsFunc->MallocDev(sizeof(HAL_DEVICE)); -+ if (!HalPtr) -+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED); -+ -+ HalFuncPtr = (HAL_FUNCTIONS *) OsFunc->Malloc(sizeof(HAL_FUNCTIONS)); -+ if (!HalFuncPtr) -+ return (EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED); -+ -+ /* Initialize the size of hal functions */ -+ *HalFuncSize = sizeof (HAL_FUNCTIONS); -+ -+ /* clear the device structure */ -+ OsFunc->Memset(HalPtr, 0, sizeof(HAL_DEVICE)); -+ -+ /* clear the function pointers */ -+ OsFunc->Memset(HalFuncPtr, 0, sizeof(HAL_FUNCTIONS)); -+ -+ /* initialize the HAL_DEVICE structure */ -+ HalPtr->OsDev = OsDev; -+ /*HalPtr->OsOpen = OsDev;*/ -+ HalPtr->Inst = Inst; -+ HalPtr->OsFunc = OsFunc; -+ -+ /* Supply pointers for the CPHAL API functions */ -+ HalFuncPtr->RxReturn = halRxReturn; -+ HalFuncPtr->Init = halInit; -+ HalFuncPtr->Close = halClose; -+ HalFuncPtr->Send = halSend; -+ HalFuncPtr->ChannelSetup = halChannelSetup; -+ HalFuncPtr->ChannelTeardown = halChannelTeardown; -+ HalFuncPtr->Open = halOpen; -+ HalFuncPtr->Kick = halKick; -+ HalFuncPtr->RegAccess = halRegAccess; -+ HalFuncPtr->Probe = halProbe; -+ HalFuncPtr->Control = halControl; -+ HalFuncPtr->Tick = halTick; -+ HalFuncPtr->Shutdown = halShutdown; -+ HalFuncPtr->OamFuncConfig = halOamFuncConfig; /* +GSG 030306 */ -+ HalFuncPtr->OamLoopbackConfig = halOamLoopbackConfig; /* ~GSG 030416 */ -+ -+ /* Temporary */ -+ /*HalFuncPtr->StatsGetOld = StatsGet;*/ -+ HalFuncPtr->PacketProcessEnd = halPacketProcessEnd; -+ -+ /* Now, AAL5 must connect to the CPSAR layer */ -+ -+ /* Attach to SAR HAL Functions */ -+ /* -+ cpsarInitModule(NULL, NULL, 0, NULL, &SarFuncSize, Inst); -+ -+ if (SarFuncSize!=sizeof(CPSAR_FUNCTIONS)) -+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_CPSAR_VERSION_NOT_SUPPORTED); -+ -+ HalPtr->SarFunc = (CPSAR_FUNCTIONS *) OsFunc->Malloc(SarFuncSize); -+ */ -+ -+ rc = cpsarInitModule(&HalPtr->SarDev, OsDev, &HalPtr->SarFunc, OsFunc, sizeof(OS_FUNCTIONS), &SarFuncSize, Inst); -+ -+ /* pass back the error value from the CPSAR layer if necessary */ -+ if (rc) -+ return(rc); -+ -+ /* -+ if (!HalPtr->SarDev) -+ return(EC_AAL5|EC_FUNC_HAL_INIT|EC_VAL_NULL_CPSAR_DEV); -+ */ -+ -+ /* Initialize the hardware state */ -+ HalPtr->State = enConnected; -+ -+ /* keep a reference to HalFuncPtr so I can free it later */ -+ HalPtr->HalFuncPtr = HalFuncPtr; -+ -+ /* pass the HalPtr back to the caller */ -+ *HalDev = HalPtr; -+ *HalFunc = HalFuncPtr; -+ -+ return(EC_NO_ERRORS); -+ } -diff -urN linux.old/drivers/atm/sangam_atm/aal5sar.h linux.dev/drivers/atm/sangam_atm/aal5sar.h ---- linux.old/drivers/atm/sangam_atm/aal5sar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/aal5sar.h 2005-08-23 04:46:50.080846280 +0200 -@@ -0,0 +1,198 @@ -+/**@file************************************************************************ -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: aal5sar.h -+ * -+ * DESCRIPTION: -+ * This file contains data structure definitions for the AAL5 HAL SAR. -+ * -+ * HISTORY: -+ * 28Feb02 Greg 1.00 Original Version created. -+ * 06Mar02 Greg 1.01 Documented structures. -+ * 18Jul02 Greg 1.02 Major reorganization -+ * -+ *****************************************************************************/ -+#ifndef _INC_AAL5SAR -+#define _INC_AAL5SAR -+ -+/** \namespace AAL5_Version -+This documents version 01.06.06 of the AAL5 CPHAL. -+*/ -+const char *pszVersion_CPAAL5="CPAAL5 01.06.06 "__DATE__" "__TIME__; -+ -+#include "cpsar_cpaal5.h" -+ -+#define NUM_AAL5_CHAN 16 -+#define MAX_AAL5_CHAN 15 -+#define MAX_QUEUE 2 -+#define MAX_DIRECTION 2 -+ -+#define PKT_TYPE_AAL5 0 /* +GSG 030508 */ -+#define PKT_TYPE_NULL 1 /* +GSG 030508 */ -+#define PKT_TYPE_OAM 2 /* +GSG 030508 */ -+#define PKT_TYPE_TRANS 3 /* +GSG 030508 */ -+#define ATM_HEADER_SIZE 4 /* +GSG 030508 */ -+ -+/* -+ * HAL Default Parameter Values -+ */ -+#define CFG_TX_NUM_BUFS {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256} -+#define CFG_RX_NUM_BUFS {256,256,256,256,256,256,256,256, 256,256,256,256,256,256,256,256} -+#define CFG_RX_BUF_SIZE {1518,1518,1518,1518,1518,1518,1518,1518, 1518,1518,1518,1518,1518,1518,1518,1518} -+#define CFG_RX_BUF_OFFSET {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_TX_NUM_QUEUES {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1} -+#define CFG_CPCS_UU {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_DA_MASK {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_PRIORITY {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_PKT_TYPE {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_VCI {100,101,102,103,104,105,106,107, 108,109,110,111,112,113,114,115} -+#define CFG_VPI {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_CELL_RATE {0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4, 0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4,0x30d4} -+#define CFG_QOS_TYPE {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_MBS {8,8,8,8,8,8,8,8, 8,8,8,8,8,8,8,8} -+#define CFG_PCR {1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1} -+#define CFG_GFC {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_CLP {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_PTI {0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0} -+#define CFG_RX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170} -+#define CFG_TX_MAX_SERVICE {170,170,170,170,170,170,170,170, 170,170,170,170,170,170,170,170} -+ -+static int cfg_tx_num_bufs[NUM_AAL5_CHAN] = CFG_TX_NUM_BUFS; -+static int cfg_rx_num_bufs[NUM_AAL5_CHAN] = CFG_RX_NUM_BUFS; -+static int cfg_rx_buf_size[NUM_AAL5_CHAN] = CFG_RX_BUF_SIZE; -+static int cfg_rx_buf_offset[NUM_AAL5_CHAN] = CFG_RX_BUF_OFFSET; -+static int cfg_tx_num_queues[NUM_AAL5_CHAN] = CFG_TX_NUM_QUEUES; -+static bit32u cfg_cpcs_uu[NUM_AAL5_CHAN] = CFG_CPCS_UU; -+static int cfg_da_mask[NUM_AAL5_CHAN] = CFG_DA_MASK; -+static int cfg_priority[NUM_AAL5_CHAN] = CFG_PRIORITY; -+static int cfg_pkt_type[NUM_AAL5_CHAN] = CFG_PKT_TYPE; -+static int cfg_vci[NUM_AAL5_CHAN] = CFG_VCI; -+static int cfg_vpi[NUM_AAL5_CHAN] = CFG_VPI; -+static bit32u cfg_cell_rate[NUM_AAL5_CHAN] = CFG_CELL_RATE; -+static int cfg_qos_type[NUM_AAL5_CHAN] = CFG_QOS_TYPE; -+static int cfg_mbs[NUM_AAL5_CHAN] = CFG_MBS; -+static int cfg_pcr[NUM_AAL5_CHAN] = CFG_PCR; -+static int cfg_gfc[NUM_AAL5_CHAN] = CFG_GFC; -+static int cfg_clp[NUM_AAL5_CHAN] = CFG_CLP; -+static int cfg_pti[NUM_AAL5_CHAN] = CFG_PTI; -+static int cfg_rx_max_service[NUM_AAL5_CHAN]= CFG_RX_MAX_SERVICE; -+static int cfg_tx_max_service[NUM_AAL5_CHAN]= CFG_TX_MAX_SERVICE; -+static char *channel_names[] = CHANNEL_NAMES; -+ -+/* -+ * The HAL_FUNCTIONS struct defines the function pointers for all HAL functions -+ * accessible to upper layer software. It is populated by calling -+ * halInitModules(). -+ * -+ * Note that this list is still under definition. -+ */ -+ -+/* -+ * This is the data structure for a transmit buffer descriptor. The first -+ * four 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor -+ * words. The other words are SAR/HAL implementation specific. -+ */ -+typedef struct -+ { -+ bit32 HNext; /**< Hardware's pointer to next buffer descriptor */ -+ bit32 BufPtr; /**< Pointer to the data buffer */ -+ bit32 Off_BLen; /**< Contains buffer offset and buffer length */ -+ bit32 mode; /**< SOP, EOP, Ownership, EOQ, Teardown Complete bits */ -+ bit32 AtmHeader; /**< Atm Header to be used for each fragment */ -+ bit32 Word5; /**< General control information for the packet */ -+ bit32 Res6; -+ bit32 Res7; -+ void *Next; -+ void *OsInfo; -+#ifdef __CPHAL_DEBUG -+ bit32 DbgSop; -+ bit32 DbgData; -+ bit32 DbgFraglist; -+#endif -+ void *Eop; -+ }HAL_TCB; -+ -+/* -+ * This is the data structure for a receive buffer descriptor. The first -+ * six 32-bit words of the BD represent the CPPI 3.0 defined buffer descriptor -+ * words. The other words are HAL implementation specific. -+ */ -+typedef volatile struct hal_private -+ { -+ bit32 HNext; /**< Hardware's pointer to next buffer descriptor */ -+ bit32 BufPtr; /**< Pointer to the data buffer */ -+ bit32 Off_BLen; /**< Contains buffer offset and buffer length */ -+ bit32 mode; /**< SOP, EOP, Ownership, EOQ, Teardown, Q Starv, Length */ -+ bit32 AtmHeader; -+ bit32 UuCpi; -+ bit32 Res6; -+ bit32 Res7; -+ void *DatPtr; -+ void *Next; -+ void *OsInfo; -+ void *Eop; -+ bit32 FragCount; -+ bit32 Ch; -+ HAL_DEVICE *HalDev; -+ }HAL_RCB; -+ -+ -+#define MAX_NEEDS 512 /*MJH+030409*/ -+/* -+ * This is the data structure for a generic HAL device. It contains all device -+ * specific data for a single instance of that device. This includes Rx/Tx -+ * buffer queues, device base address, reset bit, and other information. -+ */ -+typedef struct hal_device -+ { -+ HAL_RCB *RcbPool[NUM_AAL5_CHAN]; -+ bit32u rxbufseq; -+ bit32 RxActQueueCount[NUM_AAL5_CHAN]; -+ HAL_RCB *RxActQueueHead[NUM_AAL5_CHAN]; -+ HAL_RCB *RxActQueueTail[NUM_AAL5_CHAN]; -+ bit32 RxActive[NUM_AAL5_CHAN]; -+ bit32 dev_base; -+ HAL_TCB *TcbPool[NUM_AAL5_CHAN][MAX_QUEUE]; -+ bit32 offset; -+ bit32 TxActQueueCount[NUM_AAL5_CHAN][MAX_QUEUE]; -+ HAL_TCB *TxActQueueHead[NUM_AAL5_CHAN][MAX_QUEUE]; -+ HAL_TCB *TxActQueueTail[NUM_AAL5_CHAN][MAX_QUEUE]; -+ bit32 TxActive[NUM_AAL5_CHAN][MAX_QUEUE]; -+ bit32 TxTeardownPending[NUM_AAL5_CHAN]; -+ bit32 RxTeardownPending[NUM_AAL5_CHAN]; -+ bit32 ChIsOpen[NUM_AAL5_CHAN][MAX_DIRECTION]; -+ bit32 ChIsSetup[NUM_AAL5_CHAN][MAX_DIRECTION]; -+ bit32 interrupt; -+ bit32 debug; -+ OS_DEVICE *OsDev; -+ OS_FUNCTIONS *OsFunc; -+ CPSAR_FUNCTIONS *SarFunc; -+ CPSAR_DEVICE *SarDev; -+ /*void *OsOpen;*/ -+ /*FRAGLIST fraglist[MAX_FRAG];*/ -+ FRAGLIST *fraglist; -+ char *TcbStart[NUM_AAL5_CHAN][MAX_QUEUE]; -+ char *RcbStart[NUM_AAL5_CHAN]; -+ /*bit32 RcbSize[NUM_AAL5_CHAN];*/ -+ bit32 InRxInt[NUM_AAL5_CHAN]; -+ STAT_INFO Stats; -+ bit32 Inst; -+ bit32u DeviceCPID[4]; -+ bit32u LBSourceLLID[4]; -+ CHANNEL_INFO ChData[NUM_AAL5_CHAN]; -+ DEVICE_STATE State; -+ char *DeviceInfo; -+ HAL_FUNCTIONS *HalFuncPtr; -+ int NextRxCh; -+ int NextTxCh[2]; -+ int StrictPriority; /* +GSG 030304 */ -+ bit32u NeedsCount; /*MJH+030409*/ -+ HAL_RECEIVEINFO *Needs[MAX_NEEDS]; /*MJH+030409*/ -+ bit32u SarFrequency; /* +GSG 030416 */ -+ int MaxFrags; -+ bit32u TurboDslErrors; -+ bit32u OamLbTimeout; -+ }HALDEVICE; -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c ---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.c 2005-08-23 04:46:50.081846128 +0200 -@@ -0,0 +1,728 @@ -+#ifndef _INC_CPCOMMON_C -+#define _INC_CPCOMMON_C -+ -+#ifdef _CPHAL_CPMAC -+#include "cpremap_cpmac.c" -+#endif -+ -+#ifdef _CPHAL_AAL5 -+#include "cpremap_cpaal5.c" -+#endif -+ -+#ifdef _CPHAL_CPSAR -+#include "cpremap_cpsar.c" -+#endif -+ -+#ifdef _CPHAL_AAL2 -+#include "cpremap_cpaal2.c" -+#endif -+ -+/** -+@defgroup Common_Config_Params Common Configuration Parameters -+ -+This section documents the configuration parameters that are valid across -+all CPHAL devices. -+@{ -+*/ -+/** This is the debug level. The field is bit defined, such that the user -+should set to 1 all the bits corresponding to desired debug outputs. The following -+are the meanings for each debug bit: -+- bit0 (LSB): CPHAL Function Trace -+- b1 : OS Function call trace -+- b2 : Critical section entry/exit -+- b3 : Memory allocation/destruction -+- b4 : Detailed information in Rx path -+- b5 : Detailed information in Tx path -+- b6 : Extended error information -+- b7 : General info -+*/ -+static const char pszDebug[] = "debug"; -+/** CPU Frequency. */ -+/*static const char pszCpuFreq[] = "CpuFreq";*/ /*MJH-030403*/ -+/** Base address for the module. */ -+static const char pszBase[] = "base"; -+/** Reset bit for the module. */ -+static const char pszResetBit[] = "reset_bit"; -+/** Reset base address for the module. */ -+static const char pszResetBase[] = "ResetBase"; -+/** Interrupt line for the module. */ -+static const char pszIntLine[] = "int_line"; -+/** VLYNQ offset for the module. Disregard if not using VLYNQ. */ -+static const char pszOffset[] = "offset"; -+/** The OS may "Get" this parameter, which is a pointer -+ to a character string that indicates the version of CPHAL. */ -+static const char pszVer[] = "Version"; -+/*@}*/ -+ -+/** -+@defgroup Common_Control_Params Common Keys for [os]Control() -+ -+This section documents the keys used with the OS @c Control() interface that -+are required by CPHAL devices. -+ -+@{ -+*/ -+/** Used to wait for an integer number of clock ticks, given as an integer -+ pointer in the @p Value parameter. No actions are defined. */ -+static const char pszSleep[] = "Sleep"; -+/** Requests the OS to flush it's IO buffers. No actions are defined. */ -+static const char pszSioFlush[] = "SioFlush"; -+/*@}*/ -+ -+static const char pszStateChange[] = "StateChange"; -+static const char pszStatus[] = "Status"; -+ -+static const char pszGET[] = "Get"; -+static const char pszSET[] = "Set"; -+static const char pszCLEAR[] = "Clear"; -+static const char pszNULL[] = ""; -+static const char pszLocator[] = "Locator"; -+static const char pszOff[] = "Off"; -+static const char pszOn[] = "On"; -+static const char hcMaxFrags[] = "MaxFrags"; -+ -+#ifdef _CPHAL_CPMAC -+ -+/* New method for string constants */ -+const char hcClear[] = "Clear"; -+const char hcGet[] = "Get"; -+const char hcSet[] = "Set"; -+ -+const char hcTick[] = "Tick"; -+ -+static const CONTROL_KEY KeyCommon[] = -+ { -+ {"" , enCommonStart}, -+ {pszStatus , enStatus}, -+ {pszOff , enOff}, -+ {pszOn , enOn}, -+ {pszDebug , enDebug}, -+ {hcCpuFrequency , enCpuFreq}, /*MJH~030403*/ -+ {"" , enCommonEnd} -+ }; -+#endif -+ -+/** -+@defgroup Common_Statistics Statistics -+ -+A broad array of module statistics is available. Statistics values are accessed -+through the @c Control() interface of the CPHAL. There are 5 different levels -+of statistics, each of which correspond to a unique set of data. Furthermore, -+certain statistics data is indexed by using a channel number and Tx queue number. -+The following is a brief description of each statistics level, along with the -+indexes used for the level: -+ -+- Level 0: Hardware Statistics (index with channel) -+- Level 1: CPHAL Software Statistics (channel, queue) -+- Level 2: CPHAL Flags (channel, queue) -+- Level 3: CPHAL Channel Configuration (channel) -+- Level 4: CPHAL General Configuration (no index) -+ -+The caller requests statistics information by providing a Key string to the -+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]". -+The only valid Action parameter for statistics usage is "Get". -+ -+Code Examples: -+@code -+unsigned int *StatsData; -+ -+# Get Level 0 stats for Channel 1 -+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData); -+ -+# Get Level 2 stats for Channel 0, Queue 0 -+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData); -+ -+# Get Level 4 stats -+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData); -+@endcode -+ -+The information returned in the Value parameter of @c Control() is an -+array of pointers to strings. The pointers are arranged in pairs. -+The first pointer is a pointer to a name string for a particular statistic. -+The next pointer is a pointer to a string containing the representation of -+the integer statistic value corresponding to the first pointer. This is followed -+by another pair of pointers, and so on, until a NULL pointer is encountered. The -+following is example code for processing the statistics data. Note that the OS -+is responsible for freeing the memory passed back through the Value parameter of -+@c Control(). -+ -+@code -+unsigned int *StatsData; -+ -+# Get Level 0 stats for Channel 1 -+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData); -+ -+# output Statistics data -+PrintStats(StatsData); -+ -+# the upper layer is responsible for freeing stats info -+free(&StatsPtr); -+ -+... -+ -+void PrintStats(unsigned int *StatsPtr) -+ { -+ while(*StatsPtr) -+ { -+ printf("%20s:", (char *)*StatsPtr); -+ StatsPtr++; -+ printf("%11s\n", (char *)*StatsPtr); -+ StatsPtr++; -+ } -+ MySioFlush(); -+ } -+@endcode -+ -+Within each statistics level, there are several statistics defined. The statistics that -+are common to every CPPI module are listed below. In addition, each module may define -+extra statistics in each level, which will be documented within the module-specific -+documentation appendices. -+ -+- Level 0 Statistics -+ - All level 0 statistics are module-specific. -+- Level 1 Statistics (CPHAL Software Statistics) -+ - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only) -+ - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes -+transmitting the previous last packet in the queue (per channel and queue). -+ - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the -+reception of the previous last packet in the queue (per channel). -+ - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue). -+ - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel). -+ - RxPacketsServiced: Number of received packets (per channel). -+ - TxPacketsServiced: Number of transmitted packets (per channel and queue). -+ - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel). -+ - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue). -+ - RxTotal: Total number of received packets, all channels. -+ - TxTotal: Total number of transmitted packets, all channels and queues. -+- Level 2 Statistics (CPHAL Flags) -+ - RcbPool: Pointer to receive descriptor pool (per channel). -+ - RxActQueueCount: Number of buffers currently available for receive (per channel). -+ - RxActQueueHead: Pointer to first buffer in receive queue (per channel). -+ - RxActQueueTail: Pointer to last buffer in receive queue (per channel). -+ - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available). -+ - RcbStart: Pointer to block of receive descriptors. -+ - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise. -+ - TcbPool: Pointer to transmit descriptor pool (per channel and queue). -+ - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue). -+ - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue). -+ - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue). -+ - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send). -+ - TcbStart: Pointer to block of transmit descriptors. -+ - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise. -+- Level 3 Statistics (CPHAL Channel Configuration) -+ - RxBufSize: Rx buffer size. -+ - RxBufferOffset: Rx buffer offset. -+ - RxNumBuffers: Number of Rx buffers. -+ - RxServiceMax: Maximum number of receive packets to service at a time. -+ - TxNumBuffers: Number of Tx buffer descriptors. -+ - TxNumQueues: Number of Tx queues to use. -+ - TxServiceMax: Maximum number of transmit packets to service at a time. -+- Level 4 Statistics (CPHAL General Configuration) -+ - Base Address: Base address of the module. -+ - Offset (VLYNQ): VLYNQ relative module offset. -+ - Interrupt Line: Interrupt number. -+ - Debug: Debug flag, 1 to enable debug. -+ - Inst: Instance number. -+*/ -+ -+/* -+ Data Type 0 = int display -+ Data Type 1 = hex display -+ Data Type 2 = channel structure, int display -+ Data Type 3 = queue index and int display -+ Data Type 4 = queue index and hex display -+*/ -+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */ -+static STATS_TABLE StatsTable0[] = -+ { -+#ifdef _CPHAL_AAL5 -+ /* Name , Data Ptr, Data Type */ -+ {"Crc Errors", 0, 0}, -+ {"Len Errors", 0, 0}, -+ {"Abort Errors", 0, 0}, -+ {"Starv Errors", 0, 0} -+#endif -+#ifdef _CPHAL_CPMAC -+ {"Rx Good Frames", 0, 0} -+#endif -+ }; -+ -+static STATS_TABLE StatsTable1[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"DmaLenErrors", 0, 0}, -+ {"TxMisQCnt", 0, 3}, -+ {"RxMisQCnt", 0, 0}, -+ {"TxEOQCnt", 0, 3}, -+ {"RxEOQCnt", 0, 0}, -+ {"RxPacketsServiced", 0, 0}, -+ {"TxPacketsServiced", 0, 3}, -+ {"RxMaxServiced", 0, 0}, -+ {"TxMaxServiced", 0, 3}, -+ {"RxTotal", 0, 0}, -+ {"TxTotal", 0, 0}, -+ }; -+ -+static STATS_TABLE StatsTable2[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"RcbPool", 0, 1}, -+ {"RxActQueueCount", 0, 0}, -+ {"RxActQueueHead", 0, 1}, -+ {"RxActQueueTail", 0, 1}, -+ {"RxActive", 0, 0}, -+ {"RcbStart", 0, 1}, -+ {"RxTeardownPending", 0, 0}, -+ {"TcbPool", 0, 4}, -+ {"TxActQueueCount", 0, 3}, -+ {"TxActQueueHead", 0, 4}, -+ {"TxActQueueTail", 0, 4}, -+ {"TxActive", 0, 3}, -+ {"TcbStart", 0, 4}, -+ {"TxTeardownPending", 0, 0} -+ }; -+ -+static STATS_TABLE StatsTable3[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"RxBufSize", 0, 2}, -+ {"RxBufferOffset", 0, 2}, -+ {"RxNumBuffers", 0, 2}, -+ {"RxServiceMax", 0, 2}, -+ {"TxNumBuffers", 0, 2}, -+ {"TxNumQueues", 0, 2}, -+ {"TxServiceMax", 0, 2}, -+#ifdef _CPHAL_AAL5 -+ {"CpcsUU", 0, 2}, -+ {"Gfc", 0, 2}, -+ {"Clp", 0, 2}, -+ {"Pti", 0, 2}, -+ {"DaMask", 0, 2}, -+ {"Priority", 0, 2}, -+ {"PktType", 0, 2}, -+ {"Vci", 0, 2}, -+ {"Vpi", 0, 2}, -+ {"CellRate", 0, 2}, -+ {"QosType", 0, 2}, -+ {"Mbs", 0, 2}, -+ {"Pcr", 0, 2} -+#endif -+ }; -+ -+static STATS_TABLE StatsTable4[] = -+ { -+ {"Base Address", 0, 1}, -+ {"Offset (VLYNQ)", 0, 0}, -+ {"Interrupt Line", 0, 0}, -+ {"Debug", 0, 0}, -+ {"Instance", 0, 0}, -+#ifdef _CPHAL_AAL5 -+ {"UniNni", 0, 0} -+#endif -+ }; -+ -+static STATS_DB StatsDb[] = -+ { -+ {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0}, -+ {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1}, -+ {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2}, -+ {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3}, -+ {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4} -+ }; -+#endif /* +GSG 030307 */ -+ -+#ifdef _CPHAL_CPMAC /* +RC 3.02 */ -+static void resetWait(HAL_DEVICE *HalDev) -+ { /*+RC3.02*/ -+ const int TickReset=64; -+ osfuncSleep((int*)&TickReset); -+ } /*+RC3.02*/ -+#endif /* +RC 3.02 */ -+ -+/* I only define the reset base function for the modules -+ that can perform a reset. The AAL5 and AAL2 modules -+ do not perform a reset, that is done by the shared module -+ CPSAR */ -+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT) -+/* -+ * Determines the reset register address to be used for a particular device. -+ * It will search the current device entry for Locator information. If the -+ * device is a root device, there will be no Locator information, and the -+ * function will find and return the root reset register. If a Locator value -+ * is found, the function will search each VLYNQ device entry in the system -+ * looking for a matching Locator. Once it finds a VLYNQ device entry with -+ * a matching Locator, it will extract the "ResetBase" parameter from that -+ * VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter). -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param ResetBase Pointer to integer address of reset register. -+ * -+ * @return 0 OK, Non-zero not OK -+ */ -+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase) -+ { -+ char *DeviceInfo = HalDev->DeviceInfo; -+ char *MyLocator, *NextLocator; -+ int Inst=1; -+ bit32u error_code; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator); -+ if (error_code) -+ { -+ /* if no Locator value, device is on the root, so get the "reset" device */ -+ error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo); -+ if (error_code) -+ { -+ return(EC_VAL_DEVICE_NOT_FOUND); -+ } -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase); -+ if (error_code) -+ { -+ return(EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ -+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase)); -+ -+ /* found base address for root device, so we're done */ -+ return (EC_NO_ERRORS); -+ } -+ else -+ { -+ /* we have a Locator value, so the device is remote */ -+ -+ /* Find a vlynq device with a matching locator value */ -+ while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS) -+ { -+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator); -+ if (error_code) -+ { -+ /* no Locator value for this VLYNQ, so move on */ -+ continue; -+ } -+ if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0) -+ { -+ /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase); -+ if (error_code) -+ { -+ return(EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase)); -+ -+ /* found base address for root device, so we're done */ -+ return (EC_NO_ERRORS); -+ } -+ Inst++; -+ } /* while */ -+ } /* else */ -+ -+ return (EC_NO_ERRORS); -+ } -+#endif -+ -+#ifndef _CPHAL_AAL2 /* + RC 3.02 */ -+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev) -+ { -+ bit32u ParmValue; -+ bit32 error_code; -+ char *DeviceInfo = HalDev->DeviceInfo; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue)); -+ -+#ifndef _CPHAL_AAL5 -+#ifndef _CPHAL_AAL2 -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue); -+ if(error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND); -+ } -+ HalDev->ResetBit = ParmValue; -+ -+ /* Get reset base address */ -+ error_code = ResetBaseGet(HalDev, &ParmValue); -+ if (error_code) -+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND); -+ HalDev->ResetBase = ParmValue; -+#endif -+#endif -+ -+#ifndef _CPHAL_CPSAR -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND); -+ } -+ HalDev->interrupt = ParmValue; -+#endif -+ -+ /* only look for the offset if there is a Locator field, which indicates that -+ the module is a VLYNQ module */ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue); -+ if (!error_code) -+ { -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND); -+ } -+ HalDev->offset = ParmValue; -+ } -+ else -+ HalDev->offset = 0; -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue); -+ if (!error_code) HalDev->debug = ParmValue; -+ -+ return (EC_NO_ERRORS); -+ } -+#endif /* +RC 3.02 */ -+ -+#ifdef _CPHAL_CPMAC /* +RC 3.02 */ -+static void StatsInit(HAL_DEVICE *HalDev) /* +() RC3.02 */ -+ { -+ /* even though these statistics may be for multiple channels and -+ queues, i need only configure the pointer to the beginning -+ of the array, and I can index from there if necessary */ -+ -+#ifdef _CPHAL_AAL5 -+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0]; -+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0]; -+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0]; -+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0]; -+ -+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0]; -+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0]; -+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0]; -+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0]; -+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0]; -+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0]; -+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0]; -+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced; -+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0]; -+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal; -+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal; -+#endif -+ -+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) -+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0]; -+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0]; -+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0]; -+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0]; -+ StatsTable2[4].StatPtr = &HalDev->RxActive[0]; -+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0]; -+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0]; -+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0]; -+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0]; -+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0]; -+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0]; -+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0]; -+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0]; -+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0]; -+ -+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize; -+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset; -+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers; -+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax; -+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers; -+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues; -+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax; -+#ifdef _CPHAL_AAL5 -+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU; -+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc; -+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp; -+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti; -+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask; -+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority; -+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType; -+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci; -+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi; -+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate; -+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType; -+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs; -+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr; -+#endif -+#endif -+ -+ StatsTable4[0].StatPtr = &HalDev->dev_base; -+ StatsTable4[1].StatPtr = &HalDev->offset; -+ StatsTable4[2].StatPtr = &HalDev->interrupt; -+ StatsTable4[3].StatPtr = &HalDev->debug; -+ StatsTable4[4].StatPtr = &HalDev->Inst; -+ } -+#endif /* +RC 3.02 */ -+ -+#ifndef _CPHAL_CPSAR /* +RC 3.02 */ -+#ifndef _CPHAL_AAL2 /* +RC 3.02 */ -+/* -+ * Returns statistics information. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 -+ */ -+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue) -+ { -+ int Size; -+ bit32u *AddrPtr; -+ char *DataPtr; -+ STATS_TABLE *StatsTable; -+ int i, NumberOfStats; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n", -+ (bit32u)HalDev, (bit32u)StatPtr); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ StatsTable = StatsDb[Index].StatTable; -+ NumberOfStats = StatsDb[Index].NumberOfStats; -+ -+ Size = sizeof(bit32u)*((NumberOfStats*2)+1); -+ Size += (NumberOfStats*11); -+ *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size); -+ -+ AddrPtr = (bit32u *) *StatPtr; -+ DataPtr = (char *)AddrPtr; -+ DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1); -+ -+ for (i=0; i<NumberOfStats; i++) -+ { -+ *AddrPtr++ = (bit32u)StatsTable[i].StatName; -+ *AddrPtr++ = (bit32u)DataPtr; -+ if (&StatsTable[i].StatPtr[Ch] != 0) -+ { -+ switch(StatsTable[i].DataType) -+ { -+ case 0: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]); -+ break; -+ case 1: -+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]); -+ break; -+ case 2: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4)))); -+ break; -+ case 3: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue)); -+ break; -+ case 4: -+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue)); -+ break; -+ default: -+ /* invalid data type, due to CPHAL programming error */ -+ break; -+ } -+ } -+ else -+ { -+ /* invalid statistics pointer, probably was not initialized */ -+ } -+ DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1; -+ } -+ -+ *AddrPtr = (bit32u) 0; -+ -+ return (EC_NO_ERRORS); -+ } -+#endif /* +RC 3.02 */ -+#endif /* +RC 3.02 */ -+ -+#ifdef _CPHAL_CPMAC -+static void gpioFunctional(int base, int bit) -+ { /*+RC3.02*/ -+ bit32u GpioEnr = base + 0xC; -+ /* To make functional, set to zero */ -+ *(volatile bit32u *)(GpioEnr) &= ~(1 << bit); /*+RC3.02*/ -+ } /*+RC3.02*/ -+ -+ -+/*+RC3.02*/ -+/* Common function, Checks to see if GPIO should be in functional mode */ -+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo) -+ { /*+RC3.02*/ -+ int rc; -+ void *DeviceInfo; -+ char *pszMuxBits; -+ char pszMuxBit[20]; -+ char *pszTmp; -+ char szMuxBit[20]; -+ char *ptr; -+ int base; -+ int reset_bit; -+ int bit; -+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc; -+ -+ rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp); -+ if(rc) return; -+ /* gpio entry found, get GPIO register info and make functional */ -+ -+ /* temp copy until FinParmValue fixed */ -+ ptr = &szMuxBit[0]; -+ while ((*ptr++ = *pszTmp++)); -+ -+ pszMuxBits = &szMuxBit[0]; -+ -+ rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo); -+ if(rc) return; -+ -+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base); -+ if(rc) return; -+ -+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit); -+ if(rc) return; -+ -+ /* If GPIO still in reset, then exit */ -+ if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0) -+ return; -+ /* format for gpio_mux is gpio_mux = <int>;<int>;<int>...*/ -+ while (*pszMuxBits) -+ { -+ pszTmp = &pszMuxBit[0]; -+ if(*pszMuxBits == ';') pszMuxBits++; -+ while ((*pszMuxBits != ';') && (*pszMuxBits != '\0')) -+ { -+ osfuncSioFlush(); -+ /*If value not a number, skip */ -+ if((*pszMuxBits < '0') || (*pszMuxBits > '9')) -+ pszMuxBits++; -+ else -+ *pszTmp++ = *pszMuxBits++; -+ } -+ *pszTmp = '\0'; -+ bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10); -+ gpioFunctional(base, bit); -+ resetWait(HalDev); /* not sure if this is needed */ -+ } -+ } /*+RC3.02*/ -+#endif /* CPMAC */ -+ -+#ifdef _CPHAL_AAL5 -+const char hcSarFrequency[] = "SarFreq"; -+#endif -+ -+#endif /* _INC */ -diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h ---- linux.old/drivers/atm/sangam_atm/cpcommon_cpaal5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpaal5.h 2005-08-23 04:46:50.082845976 +0200 -@@ -0,0 +1,79 @@ -+#ifndef _INC_CPCOMMON_H -+#define _INC_CPCOMMON_H -+ -+#define VOLATILE32(addr) (*(volatile bit32u *)(addr)) -+#ifndef dbgPrintf -+#define dbgPrintf HalDev->OsFunc->Printf -+#endif -+ -+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field -+ -+#define DBG(level) (HalDev->debug & (1<<(level))) -+/* -+#define DBG0() DBG(0) -+#define DBG1() DBG(1) -+#define DBG2() DBG(2) -+#define DBG3() DBG(3) -+#define DBG4() DBG(4) -+#define DBG5() DBG(5) -+#define DBG6() DBG(6) -+#define DBG7() DBG(7) -+*/ -+ -+/* -+ * List of defined actions for use with Control(). -+ */ -+typedef enum -+ { -+ enGET=0, /**< Get the value associated with a key */ -+ enSET, /**< Set the value associates with a key */ -+ enCLEAR, /**<Clear the value */ -+ enNULL /**< No data action, used to initiate a service or send a message */ -+ }ACTION; -+ -+/* -+ * Enumerated hardware states. -+ */ -+typedef enum -+ { -+ enConnected=1, enDevFound, enInitialized, enOpened -+ }DEVICE_STATE; -+ -+typedef enum -+ { -+ enCommonStart=0, -+ /* General */ -+ enOff, enOn, enDebug, -+ /* Module General */ -+ enCpuFreq, -+ enStatus, -+ enCommonEnd -+ }COMMON_KEY; -+ -+typedef struct -+ { -+ const char *strKey; -+ int enKey; -+ }CONTROL_KEY; -+ -+typedef struct -+ { -+ char *StatName; -+ unsigned int *StatPtr; -+ int DataType; /* 0: int, 1: hex int, 2:channel data */ -+ }STATS_TABLE; -+ -+typedef struct -+ { -+ int NumberOfStats; -+ STATS_TABLE *StatTable; -+ }STATS_DB; -+ -+#define osfuncSioFlush() HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0) -+#define osfuncSleep(Ticks) HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks) -+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0) -+ -+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"} -+ -+#endif -+ -diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c ---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.c 2005-08-23 04:46:50.082845976 +0200 -@@ -0,0 +1,728 @@ -+#ifndef _INC_CPCOMMON_C -+#define _INC_CPCOMMON_C -+ -+#ifdef _CPHAL_CPMAC -+#include "cpremap_cpmac.c" -+#endif -+ -+#ifdef _CPHAL_AAL5 -+#include "cpremap_cpaal5.c" -+#endif -+ -+#ifdef _CPHAL_CPSAR -+#include "cpremap_cpsar.c" -+#endif -+ -+#ifdef _CPHAL_AAL2 -+#include "cpremap_cpaal2.c" -+#endif -+ -+/** -+@defgroup Common_Config_Params Common Configuration Parameters -+ -+This section documents the configuration parameters that are valid across -+all CPHAL devices. -+@{ -+*/ -+/** This is the debug level. The field is bit defined, such that the user -+should set to 1 all the bits corresponding to desired debug outputs. The following -+are the meanings for each debug bit: -+- bit0 (LSB): CPHAL Function Trace -+- b1 : OS Function call trace -+- b2 : Critical section entry/exit -+- b3 : Memory allocation/destruction -+- b4 : Detailed information in Rx path -+- b5 : Detailed information in Tx path -+- b6 : Extended error information -+- b7 : General info -+*/ -+static const char pszDebug[] = "debug"; -+/** CPU Frequency. */ -+/*static const char pszCpuFreq[] = "CpuFreq";*/ /*MJH-030403*/ -+/** Base address for the module. */ -+static const char pszBase[] = "base"; -+/** Reset bit for the module. */ -+static const char pszResetBit[] = "reset_bit"; -+/** Reset base address for the module. */ -+static const char pszResetBase[] = "ResetBase"; -+/** Interrupt line for the module. */ -+static const char pszIntLine[] = "int_line"; -+/** VLYNQ offset for the module. Disregard if not using VLYNQ. */ -+static const char pszOffset[] = "offset"; -+/** The OS may "Get" this parameter, which is a pointer -+ to a character string that indicates the version of CPHAL. */ -+static const char pszVer[] = "Version"; -+/*@}*/ -+ -+/** -+@defgroup Common_Control_Params Common Keys for [os]Control() -+ -+This section documents the keys used with the OS @c Control() interface that -+are required by CPHAL devices. -+ -+@{ -+*/ -+/** Used to wait for an integer number of clock ticks, given as an integer -+ pointer in the @p Value parameter. No actions are defined. */ -+static const char pszSleep[] = "Sleep"; -+/** Requests the OS to flush it's IO buffers. No actions are defined. */ -+static const char pszSioFlush[] = "SioFlush"; -+/*@}*/ -+ -+static const char pszStateChange[] = "StateChange"; -+static const char pszStatus[] = "Status"; -+ -+static const char pszGET[] = "Get"; -+static const char pszSET[] = "Set"; -+static const char pszCLEAR[] = "Clear"; -+static const char pszNULL[] = ""; -+static const char pszLocator[] = "Locator"; -+static const char pszOff[] = "Off"; -+static const char pszOn[] = "On"; -+static const char hcMaxFrags[] = "MaxFrags"; -+ -+#ifdef _CPHAL_CPMAC -+ -+/* New method for string constants */ -+const char hcClear[] = "Clear"; -+const char hcGet[] = "Get"; -+const char hcSet[] = "Set"; -+ -+const char hcTick[] = "Tick"; -+ -+static const CONTROL_KEY KeyCommon[] = -+ { -+ {"" , enCommonStart}, -+ {pszStatus , enStatus}, -+ {pszOff , enOff}, -+ {pszOn , enOn}, -+ {pszDebug , enDebug}, -+ {hcCpuFrequency , enCpuFreq}, /*MJH~030403*/ -+ {"" , enCommonEnd} -+ }; -+#endif -+ -+/** -+@defgroup Common_Statistics Statistics -+ -+A broad array of module statistics is available. Statistics values are accessed -+through the @c Control() interface of the CPHAL. There are 5 different levels -+of statistics, each of which correspond to a unique set of data. Furthermore, -+certain statistics data is indexed by using a channel number and Tx queue number. -+The following is a brief description of each statistics level, along with the -+indexes used for the level: -+ -+- Level 0: Hardware Statistics (index with channel) -+- Level 1: CPHAL Software Statistics (channel, queue) -+- Level 2: CPHAL Flags (channel, queue) -+- Level 3: CPHAL Channel Configuration (channel) -+- Level 4: CPHAL General Configuration (no index) -+ -+The caller requests statistics information by providing a Key string to the -+@c Control() API in the following format: "Stats;[Level #];[Ch #];[Queue #]". -+The only valid Action parameter for statistics usage is "Get". -+ -+Code Examples: -+@code -+unsigned int *StatsData; -+ -+# Get Level 0 stats for Channel 1 -+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData); -+ -+# Get Level 2 stats for Channel 0, Queue 0 -+HalFunc->Control(OsDev->HalDev, "Stats;2;0;0", "Get", &StatsData); -+ -+# Get Level 4 stats -+HalFunc->Control(OsDev->HalDev, "Stats;4", "Get", &StatsData); -+@endcode -+ -+The information returned in the Value parameter of @c Control() is an -+array of pointers to strings. The pointers are arranged in pairs. -+The first pointer is a pointer to a name string for a particular statistic. -+The next pointer is a pointer to a string containing the representation of -+the integer statistic value corresponding to the first pointer. This is followed -+by another pair of pointers, and so on, until a NULL pointer is encountered. The -+following is example code for processing the statistics data. Note that the OS -+is responsible for freeing the memory passed back through the Value parameter of -+@c Control(). -+ -+@code -+unsigned int *StatsData; -+ -+# Get Level 0 stats for Channel 1 -+HalFunc->Control(OsDev->HalDev, "Stats;0;1", "Get", &StatsData); -+ -+# output Statistics data -+PrintStats(StatsData); -+ -+# the upper layer is responsible for freeing stats info -+free(&StatsPtr); -+ -+... -+ -+void PrintStats(unsigned int *StatsPtr) -+ { -+ while(*StatsPtr) -+ { -+ printf("%20s:", (char *)*StatsPtr); -+ StatsPtr++; -+ printf("%11s\n", (char *)*StatsPtr); -+ StatsPtr++; -+ } -+ MySioFlush(); -+ } -+@endcode -+ -+Within each statistics level, there are several statistics defined. The statistics that -+are common to every CPPI module are listed below. In addition, each module may define -+extra statistics in each level, which will be documented within the module-specific -+documentation appendices. -+ -+- Level 0 Statistics -+ - All level 0 statistics are module-specific. -+- Level 1 Statistics (CPHAL Software Statistics) -+ - DmaLenErrors: Incremented when the port DMA's more data than expected (per channel). (AAL5 Only) -+ - TxMisQCnt: Incremented when host queues a packet for transmission as the port finishes -+transmitting the previous last packet in the queue (per channel and queue). -+ - RxMisQCnt: Incremented when host queues adds buffers to a queue as the port finished the -+reception of the previous last packet in the queue (per channel). -+ - TxEOQCnt: Number of times the port has reached the end of the transmit queue (per channel and queue). -+ - RxEOQCnt: Number of times the port has reached the end of the receive queue (per channel). -+ - RxPacketsServiced: Number of received packets (per channel). -+ - TxPacketsServiced: Number of transmitted packets (per channel and queue). -+ - RxMaxServiced: Maximum number of packets that the CPHAL receive interrupt has serviced at a time (per channel). -+ - TxMaxServiced: Maximum number of packets that the CPHAL transmit interrupt has serviced at a time (per channel and queue). -+ - RxTotal: Total number of received packets, all channels. -+ - TxTotal: Total number of transmitted packets, all channels and queues. -+- Level 2 Statistics (CPHAL Flags) -+ - RcbPool: Pointer to receive descriptor pool (per channel). -+ - RxActQueueCount: Number of buffers currently available for receive (per channel). -+ - RxActQueueHead: Pointer to first buffer in receive queue (per channel). -+ - RxActQueueTail: Pointer to last buffer in receive queue (per channel). -+ - RxActive: 0 if inactive (no buffers available), or 1 if active (buffers available). -+ - RcbStart: Pointer to block of receive descriptors. -+ - RxTeardownPending: 1 if Rx teardown is pending but incomplete, 0 otherwise. -+ - TcbPool: Pointer to transmit descriptor pool (per channel and queue). -+ - TxActQueueCount: Number of buffers currently queued to be transmitted (per channel and queue). -+ - TxActQueueHead: Pointer to first buffer in transmit queue (per channel and queue). -+ - TxActQueueTail: Pointer to last buffer in transmit queue (per channel and queue). -+ - TxActive: 0 if inactive (no buffers to send), or 1 if active (buffers queued to send). -+ - TcbStart: Pointer to block of transmit descriptors. -+ - TxTeardownPending: 1 if Tx teardown is pending but incomplete, 0 otherwise. -+- Level 3 Statistics (CPHAL Channel Configuration) -+ - RxBufSize: Rx buffer size. -+ - RxBufferOffset: Rx buffer offset. -+ - RxNumBuffers: Number of Rx buffers. -+ - RxServiceMax: Maximum number of receive packets to service at a time. -+ - TxNumBuffers: Number of Tx buffer descriptors. -+ - TxNumQueues: Number of Tx queues to use. -+ - TxServiceMax: Maximum number of transmit packets to service at a time. -+- Level 4 Statistics (CPHAL General Configuration) -+ - Base Address: Base address of the module. -+ - Offset (VLYNQ): VLYNQ relative module offset. -+ - Interrupt Line: Interrupt number. -+ - Debug: Debug flag, 1 to enable debug. -+ - Inst: Instance number. -+*/ -+ -+/* -+ Data Type 0 = int display -+ Data Type 1 = hex display -+ Data Type 2 = channel structure, int display -+ Data Type 3 = queue index and int display -+ Data Type 4 = queue index and hex display -+*/ -+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) /* +GSG 030307 */ -+static STATS_TABLE StatsTable0[] = -+ { -+#ifdef _CPHAL_AAL5 -+ /* Name , Data Ptr, Data Type */ -+ {"Crc Errors", 0, 0}, -+ {"Len Errors", 0, 0}, -+ {"Abort Errors", 0, 0}, -+ {"Starv Errors", 0, 0} -+#endif -+#ifdef _CPHAL_CPMAC -+ {"Rx Good Frames", 0, 0} -+#endif -+ }; -+ -+static STATS_TABLE StatsTable1[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"DmaLenErrors", 0, 0}, -+ {"TxMisQCnt", 0, 3}, -+ {"RxMisQCnt", 0, 0}, -+ {"TxEOQCnt", 0, 3}, -+ {"RxEOQCnt", 0, 0}, -+ {"RxPacketsServiced", 0, 0}, -+ {"TxPacketsServiced", 0, 3}, -+ {"RxMaxServiced", 0, 0}, -+ {"TxMaxServiced", 0, 3}, -+ {"RxTotal", 0, 0}, -+ {"TxTotal", 0, 0}, -+ }; -+ -+static STATS_TABLE StatsTable2[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"RcbPool", 0, 1}, -+ {"RxActQueueCount", 0, 0}, -+ {"RxActQueueHead", 0, 1}, -+ {"RxActQueueTail", 0, 1}, -+ {"RxActive", 0, 0}, -+ {"RcbStart", 0, 1}, -+ {"RxTeardownPending", 0, 0}, -+ {"TcbPool", 0, 4}, -+ {"TxActQueueCount", 0, 3}, -+ {"TxActQueueHead", 0, 4}, -+ {"TxActQueueTail", 0, 4}, -+ {"TxActive", 0, 3}, -+ {"TcbStart", 0, 4}, -+ {"TxTeardownPending", 0, 0} -+ }; -+ -+static STATS_TABLE StatsTable3[] = -+ { -+ /* Name , Data Ptr, Data Type */ -+ {"RxBufSize", 0, 2}, -+ {"RxBufferOffset", 0, 2}, -+ {"RxNumBuffers", 0, 2}, -+ {"RxServiceMax", 0, 2}, -+ {"TxNumBuffers", 0, 2}, -+ {"TxNumQueues", 0, 2}, -+ {"TxServiceMax", 0, 2}, -+#ifdef _CPHAL_AAL5 -+ {"CpcsUU", 0, 2}, -+ {"Gfc", 0, 2}, -+ {"Clp", 0, 2}, -+ {"Pti", 0, 2}, -+ {"DaMask", 0, 2}, -+ {"Priority", 0, 2}, -+ {"PktType", 0, 2}, -+ {"Vci", 0, 2}, -+ {"Vpi", 0, 2}, -+ {"CellRate", 0, 2}, -+ {"QosType", 0, 2}, -+ {"Mbs", 0, 2}, -+ {"Pcr", 0, 2} -+#endif -+ }; -+ -+static STATS_TABLE StatsTable4[] = -+ { -+ {"Base Address", 0, 1}, -+ {"Offset (VLYNQ)", 0, 0}, -+ {"Interrupt Line", 0, 0}, -+ {"Debug", 0, 0}, -+ {"Instance", 0, 0}, -+#ifdef _CPHAL_AAL5 -+ {"UniNni", 0, 0} -+#endif -+ }; -+ -+static STATS_DB StatsDb[] = -+ { -+ {(sizeof(StatsTable0)/sizeof(STATS_TABLE)), StatsTable0}, -+ {(sizeof(StatsTable1)/sizeof(STATS_TABLE)), StatsTable1}, -+ {(sizeof(StatsTable2)/sizeof(STATS_TABLE)), StatsTable2}, -+ {(sizeof(StatsTable3)/sizeof(STATS_TABLE)), StatsTable3}, -+ {(sizeof(StatsTable4)/sizeof(STATS_TABLE)), StatsTable4} -+ }; -+#endif /* +GSG 030307 */ -+ -+#ifdef _CPHAL_CPMAC /* +RC 3.02 */ -+static void resetWait(HAL_DEVICE *HalDev) -+ { /*+RC3.02*/ -+ const int TickReset=64; -+ osfuncSleep((int*)&TickReset); -+ } /*+RC3.02*/ -+#endif /* +RC 3.02 */ -+ -+/* I only define the reset base function for the modules -+ that can perform a reset. The AAL5 and AAL2 modules -+ do not perform a reset, that is done by the shared module -+ CPSAR */ -+#if defined(_CPHAL_CPSAR) || defined(_CPHAL_CPMAC) || defined(_CPHAL_VDMAVT) -+/* -+ * Determines the reset register address to be used for a particular device. -+ * It will search the current device entry for Locator information. If the -+ * device is a root device, there will be no Locator information, and the -+ * function will find and return the root reset register. If a Locator value -+ * is found, the function will search each VLYNQ device entry in the system -+ * looking for a matching Locator. Once it finds a VLYNQ device entry with -+ * a matching Locator, it will extract the "ResetBase" parameter from that -+ * VLYNQ device entry (thus every VLYNQ entry must have the ResetBase parameter). -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param ResetBase Pointer to integer address of reset register. -+ * -+ * @return 0 OK, Non-zero not OK -+ */ -+static int ResetBaseGet(HAL_DEVICE *HalDev, bit32u *ResetBase) -+ { -+ char *DeviceInfo = HalDev->DeviceInfo; -+ char *MyLocator, *NextLocator; -+ int Inst=1; -+ bit32u error_code; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]ResetBaseGet(HalDev:%08x, ResetBase:%08x)\n", (bit32u)HalDev, ResetBase); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &MyLocator); -+ if (error_code) -+ { -+ /* if no Locator value, device is on the root, so get the "reset" device */ -+ error_code = HalDev->OsFunc->DeviceFindInfo(0, "reset", &DeviceInfo); -+ if (error_code) -+ { -+ return(EC_VAL_DEVICE_NOT_FOUND); -+ } -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "base", ResetBase); -+ if (error_code) -+ { -+ return(EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ -+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase)); -+ -+ /* found base address for root device, so we're done */ -+ return (EC_NO_ERRORS); -+ } -+ else -+ { -+ /* we have a Locator value, so the device is remote */ -+ -+ /* Find a vlynq device with a matching locator value */ -+ while ((HalDev->OsFunc->DeviceFindInfo(Inst, "vlynq", &DeviceInfo)) == EC_NO_ERRORS) -+ { -+ error_code = HalDev->OsFunc->DeviceFindParmValue(DeviceInfo, "Locator", &NextLocator); -+ if (error_code) -+ { -+ /* no Locator value for this VLYNQ, so move on */ -+ continue; -+ } -+ if (HalDev->OsFunc->Strcmpi(MyLocator, NextLocator)==0) -+ { -+ /* we have found a VLYNQ with a matching Locator, so extract the ResetBase */ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, "ResetBase", ResetBase); -+ if (error_code) -+ { -+ return(EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ *ResetBase = ((bit32u)PhysToVirtNoCache(*ResetBase)); -+ -+ /* found base address for root device, so we're done */ -+ return (EC_NO_ERRORS); -+ } -+ Inst++; -+ } /* while */ -+ } /* else */ -+ -+ return (EC_NO_ERRORS); -+ } -+#endif -+ -+#ifndef _CPHAL_AAL2 /* + RC 3.02 */ -+static bit32u ConfigGetCommon(HAL_DEVICE *HalDev) -+ { -+ bit32u ParmValue; -+ bit32 error_code; -+ char *DeviceInfo = HalDev->DeviceInfo; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]ConfigGetCommon(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszBase, &ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_BASE_ADDR_NOT_FOUND); -+ } -+ HalDev->dev_base = ((bit32u)PhysToVirtNoCache(ParmValue)); -+ -+#ifndef _CPHAL_AAL5 -+#ifndef _CPHAL_AAL2 -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszResetBit, &ParmValue); -+ if(error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BIT_NOT_FOUND); -+ } -+ HalDev->ResetBit = ParmValue; -+ -+ /* Get reset base address */ -+ error_code = ResetBaseGet(HalDev, &ParmValue); -+ if (error_code) -+ return(EC_FUNC_HAL_INIT|EC_VAL_RESET_BASE_NOT_FOUND); -+ HalDev->ResetBase = ParmValue; -+#endif -+#endif -+ -+#ifndef _CPHAL_CPSAR -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszIntLine,&ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_INTERRUPT_NOT_FOUND); -+ } -+ HalDev->interrupt = ParmValue; -+#endif -+ -+ /* only look for the offset if there is a Locator field, which indicates that -+ the module is a VLYNQ module */ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszLocator,&ParmValue); -+ if (!error_code) -+ { -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszOffset,&ParmValue); -+ if (error_code) -+ { -+ return(EC_FUNC_HAL_INIT|EC_VAL_OFFSET_NOT_FOUND); -+ } -+ HalDev->offset = ParmValue; -+ } -+ else -+ HalDev->offset = 0; -+ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo, pszDebug, &ParmValue); -+ if (!error_code) HalDev->debug = ParmValue; -+ -+ return (EC_NO_ERRORS); -+ } -+#endif /* +RC 3.02 */ -+ -+#ifdef _CPHAL_CPMAC /* +RC 3.02 */ -+static void StatsInit(HAL_DEVICE *HalDev) /* +() RC3.02 */ -+ { -+ /* even though these statistics may be for multiple channels and -+ queues, i need only configure the pointer to the beginning -+ of the array, and I can index from there if necessary */ -+ -+#ifdef _CPHAL_AAL5 -+ StatsTable0[0].StatPtr = &HalDev->Stats.CrcErrors[0]; -+ StatsTable0[1].StatPtr = &HalDev->Stats.LenErrors[0]; -+ StatsTable0[2].StatPtr = &HalDev->Stats.AbortErrors[0]; -+ StatsTable0[3].StatPtr = &HalDev->Stats.StarvErrors[0]; -+ -+ StatsTable1[0].StatPtr = &HalDev->Stats.DmaLenErrors[0]; -+ StatsTable1[1].StatPtr = &HalDev->Stats.TxMisQCnt[0][0]; -+ StatsTable1[2].StatPtr = &HalDev->Stats.RxMisQCnt[0]; -+ StatsTable1[3].StatPtr = &HalDev->Stats.TxEOQCnt[0][0]; -+ StatsTable1[4].StatPtr = &HalDev->Stats.RxEOQCnt[0]; -+ StatsTable1[5].StatPtr = &HalDev->Stats.RxPacketsServiced[0]; -+ StatsTable1[6].StatPtr = &HalDev->Stats.TxPacketsServiced[0][0]; -+ StatsTable1[7].StatPtr = &HalDev->Stats.RxMaxServiced; -+ StatsTable1[8].StatPtr = &HalDev->Stats.TxMaxServiced[0][0]; -+ StatsTable1[9].StatPtr = &HalDev->Stats.RxTotal; -+ StatsTable1[10].StatPtr = &HalDev->Stats.TxTotal; -+#endif -+ -+#if (defined(_CPHAL_AAL5) || defined(_CPHAL_CPMAC)) -+ StatsTable2[0].StatPtr = (bit32u *)&HalDev->RcbPool[0]; -+ StatsTable2[1].StatPtr = &HalDev->RxActQueueCount[0]; -+ StatsTable2[2].StatPtr = (bit32u *)&HalDev->RxActQueueHead[0]; -+ StatsTable2[3].StatPtr = (bit32u *)&HalDev->RxActQueueTail[0]; -+ StatsTable2[4].StatPtr = &HalDev->RxActive[0]; -+ StatsTable2[5].StatPtr = (bit32u *)&HalDev->RcbStart[0]; -+ StatsTable2[6].StatPtr = &HalDev->RxTeardownPending[0]; -+ StatsTable2[7].StatPtr = (bit32u *)&HalDev->TcbPool[0][0]; -+ StatsTable2[8].StatPtr = &HalDev->TxActQueueCount[0][0]; -+ StatsTable2[9].StatPtr = (bit32u *)&HalDev->TxActQueueHead[0][0]; -+ StatsTable2[10].StatPtr = (bit32u *)&HalDev->TxActQueueTail[0][0]; -+ StatsTable2[11].StatPtr = &HalDev->TxActive[0][0]; -+ StatsTable2[12].StatPtr = (bit32u *)&HalDev->TcbStart[0][0]; -+ StatsTable2[13].StatPtr = &HalDev->TxTeardownPending[0]; -+ -+ StatsTable3[0].StatPtr = &HalDev->ChData[0].RxBufSize; -+ StatsTable3[1].StatPtr = &HalDev->ChData[0].RxBufferOffset; -+ StatsTable3[2].StatPtr = &HalDev->ChData[0].RxNumBuffers; -+ StatsTable3[3].StatPtr = &HalDev->ChData[0].RxServiceMax; -+ StatsTable3[4].StatPtr = &HalDev->ChData[0].TxNumBuffers; -+ StatsTable3[5].StatPtr = &HalDev->ChData[0].TxNumQueues; -+ StatsTable3[6].StatPtr = &HalDev->ChData[0].TxServiceMax; -+#ifdef _CPHAL_AAL5 -+ StatsTable3[7].StatPtr = &HalDev->ChData[0].CpcsUU; -+ StatsTable3[8].StatPtr = &HalDev->ChData[0].Gfc; -+ StatsTable3[9].StatPtr = &HalDev->ChData[0].Clp; -+ StatsTable3[10].StatPtr = &HalDev->ChData[0].Pti; -+ StatsTable3[11].StatPtr = &HalDev->ChData[0].DaMask; -+ StatsTable3[12].StatPtr = &HalDev->ChData[0].Priority; -+ StatsTable3[13].StatPtr = &HalDev->ChData[0].PktType; -+ StatsTable3[14].StatPtr = &HalDev->ChData[0].Vci; -+ StatsTable3[15].StatPtr = &HalDev->ChData[0].Vpi; -+ StatsTable3[16].StatPtr = &HalDev->ChData[0].TxVc_CellRate; -+ StatsTable3[17].StatPtr = &HalDev->ChData[0].TxVc_QosType; -+ StatsTable3[18].StatPtr = &HalDev->ChData[0].TxVc_Mbs; -+ StatsTable3[19].StatPtr = &HalDev->ChData[0].TxVc_Pcr; -+#endif -+#endif -+ -+ StatsTable4[0].StatPtr = &HalDev->dev_base; -+ StatsTable4[1].StatPtr = &HalDev->offset; -+ StatsTable4[2].StatPtr = &HalDev->interrupt; -+ StatsTable4[3].StatPtr = &HalDev->debug; -+ StatsTable4[4].StatPtr = &HalDev->Inst; -+ } -+#endif /* +RC 3.02 */ -+ -+#ifndef _CPHAL_CPSAR /* +RC 3.02 */ -+#ifndef _CPHAL_AAL2 /* +RC 3.02 */ -+/* -+ * Returns statistics information. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 -+ */ -+static int StatsGet(HAL_DEVICE *HalDev, void **StatPtr, int Index, int Ch, int Queue) -+ { -+ int Size; -+ bit32u *AddrPtr; -+ char *DataPtr; -+ STATS_TABLE *StatsTable; -+ int i, NumberOfStats; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpcommon]StatsGet(HalDev:%08x, StatPtr:%08x)\n", -+ (bit32u)HalDev, (bit32u)StatPtr); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ StatsTable = StatsDb[Index].StatTable; -+ NumberOfStats = StatsDb[Index].NumberOfStats; -+ -+ Size = sizeof(bit32u)*((NumberOfStats*2)+1); -+ Size += (NumberOfStats*11); -+ *StatPtr = (bit32u *)HalDev->OsFunc->Malloc(Size); -+ -+ AddrPtr = (bit32u *) *StatPtr; -+ DataPtr = (char *)AddrPtr; -+ DataPtr += sizeof(bit32u)*((NumberOfStats*2)+1); -+ -+ for (i=0; i<NumberOfStats; i++) -+ { -+ *AddrPtr++ = (bit32u)StatsTable[i].StatName; -+ *AddrPtr++ = (bit32u)DataPtr; -+ if (&StatsTable[i].StatPtr[Ch] != 0) -+ { -+ switch(StatsTable[i].DataType) -+ { -+ case 0: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", (bit32u *)StatsTable[i].StatPtr[Ch]); -+ break; -+ case 1: -+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", (bit32u *)StatsTable[i].StatPtr[Ch]); -+ break; -+ case 2: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch * (sizeof(CHANNEL_INFO)/4)))); -+ break; -+ case 3: -+ HalDev->OsFunc->Sprintf(DataPtr, "%d", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue)); -+ break; -+ case 4: -+ HalDev->OsFunc->Sprintf(DataPtr, "0x%x", *((bit32u *)StatsTable[i].StatPtr + (Ch*MAX_QUEUE)+Queue)); -+ break; -+ default: -+ /* invalid data type, due to CPHAL programming error */ -+ break; -+ } -+ } -+ else -+ { -+ /* invalid statistics pointer, probably was not initialized */ -+ } -+ DataPtr += HalDev->OsFunc->Strlen(DataPtr) + 1; -+ } -+ -+ *AddrPtr = (bit32u) 0; -+ -+ return (EC_NO_ERRORS); -+ } -+#endif /* +RC 3.02 */ -+#endif /* +RC 3.02 */ -+ -+#ifdef _CPHAL_CPMAC -+static void gpioFunctional(int base, int bit) -+ { /*+RC3.02*/ -+ bit32u GpioEnr = base + 0xC; -+ /* To make functional, set to zero */ -+ *(volatile bit32u *)(GpioEnr) &= ~(1 << bit); /*+RC3.02*/ -+ } /*+RC3.02*/ -+ -+ -+/*+RC3.02*/ -+/* Common function, Checks to see if GPIO should be in functional mode */ -+static void gpioCheck(HAL_DEVICE *HalDev, void *moduleDeviceInfo) -+ { /*+RC3.02*/ -+ int rc; -+ void *DeviceInfo; -+ char *pszMuxBits; -+ char pszMuxBit[20]; -+ char *pszTmp; -+ char szMuxBit[20]; -+ char *ptr; -+ int base; -+ int reset_bit; -+ int bit; -+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc; -+ -+ rc = OsFunc->DeviceFindParmValue(moduleDeviceInfo, "gpio_mux",&pszTmp); -+ if(rc) return; -+ /* gpio entry found, get GPIO register info and make functional */ -+ -+ /* temp copy until FinParmValue fixed */ -+ ptr = &szMuxBit[0]; -+ while ((*ptr++ = *pszTmp++)); -+ -+ pszMuxBits = &szMuxBit[0]; -+ -+ rc = OsFunc->DeviceFindInfo(0,"gpio",&DeviceInfo); -+ if(rc) return; -+ -+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "base",&base); -+ if(rc) return; -+ -+ rc = OsFunc->DeviceFindParmUint(DeviceInfo, "reset_bit",&reset_bit); -+ if(rc) return; -+ -+ /* If GPIO still in reset, then exit */ -+ if((VOLATILE32(HalDev->ResetBase) & (1 << reset_bit)) == 0) -+ return; -+ /* format for gpio_mux is gpio_mux = <int>;<int>;<int>...*/ -+ while (*pszMuxBits) -+ { -+ pszTmp = &pszMuxBit[0]; -+ if(*pszMuxBits == ';') pszMuxBits++; -+ while ((*pszMuxBits != ';') && (*pszMuxBits != '\0')) -+ { -+ osfuncSioFlush(); -+ /*If value not a number, skip */ -+ if((*pszMuxBits < '0') || (*pszMuxBits > '9')) -+ pszMuxBits++; -+ else -+ *pszTmp++ = *pszMuxBits++; -+ } -+ *pszTmp = '\0'; -+ bit = OsFunc->Strtoul(pszMuxBit, &pszTmp, 10); -+ gpioFunctional(base, bit); -+ resetWait(HalDev); /* not sure if this is needed */ -+ } -+ } /*+RC3.02*/ -+#endif /* CPMAC */ -+ -+#ifdef _CPHAL_AAL5 -+const char hcSarFrequency[] = "SarFreq"; -+#endif -+ -+#endif /* _INC */ -diff -urN linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h ---- linux.old/drivers/atm/sangam_atm/cpcommon_cpsar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpcommon_cpsar.h 2005-08-23 04:46:50.083845824 +0200 -@@ -0,0 +1,79 @@ -+#ifndef _INC_CPCOMMON_H -+#define _INC_CPCOMMON_H -+ -+#define VOLATILE32(addr) (*(volatile bit32u *)(addr)) -+#ifndef dbgPrintf -+#define dbgPrintf HalDev->OsFunc->Printf -+#endif -+ -+#define ChannelUpdate(Field) if(HalChn->Field != 0xFFFFFFFF) HalDev->ChData[Ch].Field = HalChn->Field -+ -+#define DBG(level) (HalDev->debug & (1<<(level))) -+/* -+#define DBG0() DBG(0) -+#define DBG1() DBG(1) -+#define DBG2() DBG(2) -+#define DBG3() DBG(3) -+#define DBG4() DBG(4) -+#define DBG5() DBG(5) -+#define DBG6() DBG(6) -+#define DBG7() DBG(7) -+*/ -+ -+/* -+ * List of defined actions for use with Control(). -+ */ -+typedef enum -+ { -+ enGET=0, /**< Get the value associated with a key */ -+ enSET, /**< Set the value associates with a key */ -+ enCLEAR, /**<Clear the value */ -+ enNULL /**< No data action, used to initiate a service or send a message */ -+ }ACTION; -+ -+/* -+ * Enumerated hardware states. -+ */ -+typedef enum -+ { -+ enConnected=1, enDevFound, enInitialized, enOpened -+ }DEVICE_STATE; -+ -+typedef enum -+ { -+ enCommonStart=0, -+ /* General */ -+ enOff, enOn, enDebug, -+ /* Module General */ -+ enCpuFreq, -+ enStatus, -+ enCommonEnd -+ }COMMON_KEY; -+ -+typedef struct -+ { -+ const char *strKey; -+ int enKey; -+ }CONTROL_KEY; -+ -+typedef struct -+ { -+ char *StatName; -+ unsigned int *StatPtr; -+ int DataType; /* 0: int, 1: hex int, 2:channel data */ -+ }STATS_TABLE; -+ -+typedef struct -+ { -+ int NumberOfStats; -+ STATS_TABLE *StatTable; -+ }STATS_DB; -+ -+#define osfuncSioFlush() HalDev->OsFunc->Control(HalDev->OsDev,"SioFlush",pszNULL,0) -+#define osfuncSleep(Ticks) HalDev->OsFunc->Control(HalDev->OsDev,pszSleep,pszNULL,Ticks) -+#define osfuncStateChange() HalDev->OsFunc->Control(HalDev->OsDev,pszStateChange,pszNULL,0) -+ -+#define CHANNEL_NAMES {"Ch0","Ch1","Ch2","Ch3","Ch4","Ch5","Ch6","Ch7","Ch8","Ch9","Ch10","Ch11","Ch12","Ch13","Ch14","Ch15"} -+ -+#endif -+ -diff -urN linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c ---- linux.old/drivers/atm/sangam_atm/cppi_cpaal5.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cppi_cpaal5.c 2005-08-23 04:46:50.084845672 +0200 -@@ -0,0 +1,1483 @@ -+/************************************************************************* -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002,2003 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: cppi.c -+ * -+ * DESCRIPTION: -+ * This file contains shared code for all CPPI modules. -+ * -+ * HISTORY: -+ * 7Aug02 Greg RC1.00 Original Version created. -+ * 27Sep02 Mick RC1.01 Merged for use by CPMAC/CPSAR -+ * 16Oct02 Mick RC1.02 Performance Tweaks (see cppihist.txt) -+ * 12Nov02 Mick RC1.02 Updated to use cpmac_reg.h -+ * 09Jan03 Mick RC3.01 Removed modification to RxBuffer ptr -+ * 28Mar03 Mick 1.03 RxReturn now returns error if Malloc Fails -+ * 10Apr03 Mick 1.03.02 Added Needs Buffer Support -+ * 11Jun03 Mick 1.06.02 halSend() errors corrected -+ * -+ * @author Greg Guyotte -+ * @version 1.00 -+ * @date 7-Aug-2002 -+ *****************************************************************************/ -+/* each CPPI module must modify this file, the rest of the -+ code in cppi.c should be totally shared *//* Each CPPI module MUST properly define all constants shown below */ -+ -+/* CPPI registers */ -+ -+/* the following defines are not CPPI specific, but still used by cppi.c */ -+ -+static void FreeRx(HAL_DEVICE *HalDev, int Ch) -+ { -+ HAL_RCB *rcb_ptr; /*+GSG 030303*/ -+ int rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf; /*+GSG 030303*/ -+ int Num = HalDev->ChData[Ch].RxNumBuffers, i; /*+GSG 030303*/ -+ -+ /* Free Rx data buffers attached to descriptors, if necessary */ -+ if (HalDev->RcbStart[Ch] != 0) /*+GSG 030303*/ -+ { /*+GSG 030303*/ -+ for(i=0;i<Num;i++) /*+GSG 030303*/ -+ { /*+GSG 030303*/ -+ rcb_ptr = (HAL_RCB *)(HalDev->RcbStart[Ch] + (i*rcbSize)); /*+GSG 030303*/ -+ -+ /* free the data buffer */ -+ if (rcb_ptr->DatPtr != 0) -+ { -+ -+ HalDev->OsFunc->FreeRxBuffer((void *)rcb_ptr->OsInfo, (void *)rcb_ptr->DatPtr); -+ rcb_ptr->OsInfo=0; /*MJH+030522*/ -+ rcb_ptr->DatPtr=0; /*MJH+030522*/ -+ } -+ } /*+GSG 030303*/ -+ } /*+GSG 030303*/ -+ -+ /* free up all desciptors at once */ -+ HalDev->OsFunc->FreeDmaXfer(HalDev->RcbStart[Ch]); -+ -+ /* mark buffers as freed */ -+ HalDev->RcbStart[Ch] = 0; -+ } -+ -+static void FreeTx(HAL_DEVICE *HalDev, int Ch, int Queue) -+ { -+ -+/*+GSG 030303*/ -+ -+ /* free all descriptors at once */ -+ HalDev->OsFunc->FreeDmaXfer(HalDev->TcbStart[Ch][Queue]); -+ -+ HalDev->TcbStart[Ch][Queue] = 0; -+ } -+ -+/* return of 0 means that this code executed, -1 means the interrupt was not -+ a teardown interrupt */ -+static int RxTeardownInt(HAL_DEVICE *HalDev, int Ch) -+ { -+ bit32u base = HalDev->dev_base; -+ -+ int i; -+ volatile bit32u *pTmp; -+ -+ /* check to see if the interrupt is a teardown interrupt */ -+ if (((*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) & TEARDOWN_VAL) == TEARDOWN_VAL) -+ { -+ /* finish channel teardown */ -+ -+ /* Free channel resources on a FULL teardown */ -+ if (HalDev->RxTeardownPending[Ch] & FULL_TEARDOWN) -+ { -+ FreeRx(HalDev, Ch); -+ } -+ -+ /* bug fix - clear Rx channel pointers on teardown */ -+ HalDev->RcbPool[Ch] = 0; -+ HalDev->RxActQueueHead[Ch] = 0; -+ HalDev->RxActQueueCount[Ch] = 0; -+ HalDev->RxActive[Ch] = FALSE; -+ -+ /* write completion pointer */ -+ (*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) = TEARDOWN_VAL; -+ -+ /* use direction bit as a teardown pending bit! May be able to -+ use only one teardown pending integer in HalDev */ -+ -+ HalDev->RxTeardownPending[Ch] &= ~RX_TEARDOWN; -+ -+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0; -+ -+ /* call OS Teardown Complete (if TX is also done) */ -+ if ((HalDev->TxTeardownPending[Ch] & TX_TEARDOWN) == 0) -+ { -+ /* mark channel as closed */ -+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0; -+ -+ /* disable channel interrupt */ -+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch); -+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */ -+ SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch); -+ -+ /* Clear PDSP Channel State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64)); -+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++) -+ *pTmp++ = 0; -+ -+ if ((HalDev->RxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0) -+ { -+ -+ HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX); -+ } -+ /* clear all teardown pending information for this channel */ -+ HalDev->RxTeardownPending[Ch] = 0; -+ HalDev->TxTeardownPending[Ch] = 0; -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ return (-1); -+ } -+ -+/* return of 0 means that this code executed, -1 means the interrupt was not -+ a teardown interrupt */ -+static int TxTeardownInt(HAL_DEVICE *HalDev, int Ch, int Queue) -+ { -+ bit32u base = HalDev->dev_base; -+ HAL_TCB *Last, *Curr, *First; /*+GSG 030303*/ -+ -+ int i; -+ volatile bit32u *pTmp; -+ -+ if (((*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) & TEARDOWN_VAL) == TEARDOWN_VAL) -+ { -+ /* return outstanding buffers to OS +RC3.02*/ -+ Curr = HalDev->TxActQueueHead[Ch][Queue]; /*+GSG 030303*/ -+ First = Curr; /*+GSG 030303*/ -+ while (Curr) /*+GSG 030303*/ -+ { /*+GSG 030303*/ -+ /* Pop TCB(s) for packet from the stack */ /*+GSG 030303*/ -+ Last = Curr->Eop; /*+GSG 030303*/ -+ HalDev->TxActQueueHead[Ch][Queue] = Last->Next; /*+GSG 030303*/ -+ /*+GSG 030303*/ -+ /* return to OS */ /*+GSG 030303*/ -+ HalDev->OsFunc->SendComplete(Curr->OsInfo); /*+GSG 030303*/ -+ /*+GSG 030303*/ -+ /* Push Tcb(s) back onto the stack */ /*+GSG 030303*/ -+ Curr = Last->Next; /*+GSG 030303*/ -+ Last->Next = HalDev->TcbPool[Ch][Queue]; /*+GSG 030303*/ -+ HalDev->TcbPool[Ch][Queue] = First; /*+GSG 030303*/ -+ /*+GSG 030303*/ -+ /* set the first(SOP) pointer for the next packet */ /*+GSG 030303*/ -+ First = Curr; /*+GSG 030303*/ -+ } /*+GSG 030303*/ -+ -+ /* finish channel teardown */ -+ -+ /* save the OsInfo to pass to upper layer -+ THIS WAS CRASHING - because it's possible that I get the teardown -+ notification and the TcbHPool is null. In this case, the buffers -+ to free can be found in the TxHActiveQueue. If I need to get OsInfo -+ in the future, I can get it from one of those buffers. -+ OsInfo = HalDev->TcbHPool[Ch]->OsInfo; */ -+ -+ if (HalDev->TxTeardownPending[Ch] & FULL_TEARDOWN) -+ { -+ FreeTx(HalDev, Ch, Queue); -+ } /* if FULL teardown */ -+ -+ /* bug fix - clear Tx channel pointers on teardown */ -+ HalDev->TcbPool[Ch][Queue] = 0; -+ HalDev->TxActQueueHead[Ch][Queue] = 0; -+ HalDev->TxActQueueCount[Ch][Queue] = 0; -+ HalDev->TxActive[Ch][Queue] = FALSE; -+ -+ /* write completion pointer */ -+ (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) = TEARDOWN_VAL; -+ -+ /* no longer pending teardown */ -+ HalDev->TxTeardownPending[Ch] &= ~TX_TEARDOWN; -+ -+ HalDev->ChIsOpen[Ch][DIRECTION_TX] = 0; -+ -+ /* call OS Teardown Complete (if Rx is also done) */ -+ if ((HalDev->RxTeardownPending[Ch] & RX_TEARDOWN) == 0) -+ { -+ /* mark channel as closed */ -+ HalDev->ChIsOpen[Ch][DIRECTION_RX] = 0; -+ -+ /* disable channel interrupt */ -+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<Ch); -+ SAR_TX_MASK_CLR(HalDev->dev_base) = (1<<(Ch+16)); /* +GSG 030307 */ -+ SAR_RX_MASK_CLR(HalDev->dev_base) = (1<<Ch); -+ -+ /* Clear PDSP Channel State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+(Ch*64)); -+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++) -+ *pTmp++ = 0; -+ -+ if ((HalDev->TxTeardownPending[Ch] & BLOCKING_TEARDOWN) == 0) -+ { -+ -+ HalDev->OsFunc->TeardownComplete(HalDev->OsDev, Ch, DIRECTION_TX|DIRECTION_RX); -+ } -+ -+ /* clear all teardown pending information for this channel */ -+ HalDev->RxTeardownPending[Ch] = 0; -+ HalDev->TxTeardownPending[Ch] = 0; -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ return (-1); -+ } -+ -+/* +GSG 030421 */ -+static void AddToRxQueue(HAL_DEVICE *HalDev, HAL_RCB *FirstRcb, HAL_RCB *LastRcb, int FragCount, int Ch) -+ { -+ HAL_RCB *OldTailRcb; -+ -+ if (HalDev->RxActQueueCount[Ch]==0) -+ { -+ -+ HalDev->RxActQueueHead[Ch]=FirstRcb; -+ HalDev->RxActQueueTail[Ch]=LastRcb; -+ HalDev->RxActQueueCount[Ch]=FragCount; -+ if ((!HalDev->InRxInt[Ch])&&(!HalDev->RxActive[Ch])) -+ { -+ /* write Rx Queue Head Descriptor Pointer */ -+ (*(pRX_DMA_STATE_WORD_1( HalDev->dev_base )+( Ch *64))) = VirtToPhys(FirstRcb) - HalDev->offset; -+ HalDev->RxActive[Ch]=TRUE; -+ } -+ } -+ else -+ { -+ -+ OldTailRcb=HalDev->RxActQueueTail[Ch]; -+ OldTailRcb->Next=(void *)FirstRcb; -+ -+ /* Emerald fix 10/29 (Denis) */ -+ *((bit32u *) VirtToVirtNoCache(&OldTailRcb->HNext))=VirtToPhys(FirstRcb) - HalDev->offset; -+ -+ HalDev->RxActQueueTail[Ch]=LastRcb; -+ HalDev->RxActQueueCount[Ch]+=FragCount; -+ } -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function is called to indicate to the CPHAL that the upper layer -+ * software has finished processing the receive data (given to it by -+ * osReceive()). The CPHAL will then return the appropriate receive buffers -+ * and buffer descriptors to the available pool. -+ * -+ * @param HalReceiveInfo Start of receive buffer descriptor chain returned to -+ * CPHAL. -+ * @param StripFlag Flag indicating whether the upper layer software has -+ * retained ownership of the receive data buffers. -+ *<BR> -+ * 'FALSE' means that the CPHAL can reuse the receive data buffers. -+ *<BR> -+ * 'TRUE' : indicates the data buffers were retained by the OS -+ *<BR> -+ * NOTE: If StripFlag is TRUE, it is the responsibility of the upper layer software to free the buffers when they are no longer needed. -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_RCB_NEEDS_BUFFER "EC_VAL_RCB_NEEDS_BUFFER"<BR> -+ * @ref EC_VAL_RCB_DROPPED "EC_VAL_RCB_DROPPED"<BR> -+ */ -+static int halRxReturn(HAL_RECEIVEINFO *HalReceiveInfo, -+ int StripFlag) -+ { -+ int Ch = HalReceiveInfo->Ch, i; -+ HAL_RCB *LastRcb, *TempRcb; -+ char *pBuf; -+ HAL_RCB *CurrHeadRcb = HalReceiveInfo, *LastGoodRcb=0; /* +GSG 030421 */ -+ HAL_DEVICE *HalDev = HalReceiveInfo->HalDev; -+ int RcbSize = HalDev->ChData[Ch].RxBufSize; -+ int FragCount = HalReceiveInfo->FragCount; -+ int rc=0; /*MJH+030417*/ -+ int GoodCount=0; /*GSG+030421*/ -+ -+ if (HalDev->State != enOpened) -+ return(EC_AAL5 |EC_FUNC_RXRETURN|EC_VAL_INVALID_STATE); -+ -+ LastRcb=(HAL_RCB *)HalReceiveInfo->Eop; -+ LastRcb->HNext=0; -+ LastRcb->Next=0; -+ -+ if (FragCount>1) -+ { -+ LastRcb->Off_BLen=RcbSize; -+ LastRcb->mode=CB_OWNERSHIP_BIT; -+ } -+ -+ HalReceiveInfo->Off_BLen=RcbSize; -+ HalReceiveInfo->mode=CB_OWNERSHIP_BIT; -+ -+ /* If OS has kept the buffers for this packet, attempt to alloc new buffers */ -+ if (StripFlag) -+ { -+ TempRcb = HalReceiveInfo; -+ for (i=0; i<FragCount; i++) -+ { -+ if (TempRcb == 0) -+ { -+ dbgPrintf("Rx Return error while allocating new buffers\n"); -+ dbgPrintf("Rcb = %08x, Rcb->Eop = %08x, FragCount = %d:%d\n", -+ (bit32u)HalReceiveInfo, (bit32u)HalReceiveInfo->Eop, FragCount,i); -+ osfuncSioFlush(); -+ -+ return(EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_CORRUPT_RCB_CHAIN); -+ } -+ -+ /* size = ((RcbSize+15) & ~15) + 15;*/ /*-3.01b*/ -+ /*size = RcbSize + 15;*/ /* -GSG 030421 */ -+ pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(RcbSize,0, -+ 0xF,HalDev->ChData[Ch].OsSetup, -+ (void *)TempRcb, -+ (void *)&TempRcb->OsInfo, -+ (void *) HalDev->OsDev); -+ if (!pBuf) -+ { -+ /* malloc failed, add this RCB to Needs Buffer List */ -+ TempRcb->FragCount = 1; /*MJH+030417*/ -+ (HAL_RCB *)TempRcb->Eop = TempRcb; /* GSG +030430 */ -+ -+ if(HalDev->NeedsCount < MAX_NEEDS) /* +MJH 030410 */ -+ { /* +MJH 030410 */ -+ HalDev->Needs[HalDev->NeedsCount] = (HAL_RECEIVEINFO *) TempRcb; /* +MJH 030410 */ -+ HalDev->NeedsCount++; /* +MJH 030410 */ -+ rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_NEEDS_BUFFER); /* ~MJH 030417 */ -+ } /* +MJH 030410 */ -+ else /* +MJH 030410 */ -+ rc = (EC_CPPI|EC_FUNC_RXRETURN|EC_VAL_RCB_DROPPED); /* ~MJH 030417 */ -+ -+ /* requeue any previous RCB's that were ready to go before this one */ -+ if (GoodCount > 0) /* +GSG 030421 */ -+ { /* +GSG 030421 */ -+ LastGoodRcb->HNext=0; /* +GSG 030430 */ -+ LastGoodRcb->Next=0; /* +GSG 030430 */ -+ osfuncDataCacheHitWriteback((void *)LastGoodRcb, 16); /* +GSG 030430 */ -+ -+ AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch); /* +GSG 030421 */ -+ GoodCount = 0; /* +GSG 030421 */ -+ } /* +GSG 030421 */ -+ -+ CurrHeadRcb = TempRcb->Next; /* +GSG 030421 */ -+ } -+ else /* +GSG 030421 */ -+ { /* +GSG 030421 */ -+ /* malloc succeeded, requeue the RCB to the hardware */ -+ TempRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset; -+ TempRcb->DatPtr=pBuf; -+ /* Emerald fix 10/29 */ -+ osfuncDataCacheHitWriteback((void *)TempRcb, 16); -+ -+ /* i store the last good RCB in case the malloc fails for the -+ next fragment. This ensures that I can go ahead and return -+ a partial chain of RCB's to the hardware */ -+ LastGoodRcb = TempRcb; /* +GSG 030421 */ -+ GoodCount++; /* +GSG 030421 */ -+ } /* +GSG 030421 */ -+ TempRcb = TempRcb->Next; -+ } /* end of Frag loop */ -+ /* if there any good RCB's to requeue, do so here */ -+ if (GoodCount > 0) /* +GSG 030421 */ -+ { -+ AddToRxQueue(HalDev, CurrHeadRcb, LastGoodRcb, GoodCount, Ch); /* +GSG 030421 */ -+ } -+ return(rc); /* ~GSG 030421 */ -+ } -+ else -+ { -+ /* Not Stripping */ -+ /* Emerald */ -+ /* Write Back SOP and last RCB */ -+ osfuncDataCacheHitWriteback((void *)HalReceiveInfo, 16); -+ -+ if (FragCount > 1) -+ { -+ osfuncDataCacheHitWriteback((void *)LastRcb, 16); -+ } -+ /* if not stripping buffers, always add to queue */ -+ AddToRxQueue(HalDev, HalReceiveInfo, LastRcb, FragCount, Ch); /*MJH~030520*/ -+ } -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/* +MJH 030410 -+ Trys to liberate an RCB until liberation fails. -+ Note: If liberation fails then RxReturn will re-add the RCB to the -+ Needs list. -+*/ -+static void NeedsCheck(HAL_DEVICE *HalDev) -+{ -+ HAL_RECEIVEINFO* HalRcb; -+ int rc; -+ HalDev->OsFunc->CriticalOn(); -+ while(HalDev->NeedsCount) -+ { -+ HalDev->NeedsCount--; -+ HalRcb = HalDev->Needs[HalDev->NeedsCount]; -+ rc = halRxReturn(HalRcb, 1); -+ /* short circuit if RxReturn starts to fail */ -+ if (rc != 0) -+ break; -+ } -+ HalDev->OsFunc->CriticalOff(); -+} -+ -+/* -+ * This function allocates transmit buffer descriptors (internal CPHAL function). -+ * It creates a high priority transmit queue by default for a single Tx -+ * channel. If QoS is enabled for the given CPHAL device, this function -+ * will also allocate a low priority transmit queue. -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param Ch Channel number. -+ * -+ * @return 0 OK, Non-Zero Not OK -+ */ -+static int InitTcb(HAL_DEVICE *HalDev, int Ch) -+ { -+ int i, Num = HalDev->ChData[Ch].TxNumBuffers; -+ HAL_TCB *pTcb=0; -+ char *AllTcb; -+ int tcbSize, Queue; -+ int SizeMalloc; -+ -+ tcbSize = (sizeof(HAL_TCB)+0xf)&~0xf; -+ SizeMalloc = (tcbSize*Num)+0xf; -+ -+ for (Queue=0; Queue < HalDev->ChData[Ch].TxNumQueues; Queue++) -+ { -+ if (HalDev->TcbStart[Ch][Queue] == 0) -+ { -+ -+ /* malloc all TCBs at once */ -+ AllTcb = (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff); -+ if (!AllTcb) -+ { -+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_TCB_MALLOC_FAILED); -+ } -+ -+ HalDev->OsFunc->Memset(AllTcb, 0, SizeMalloc); -+ -+ /* keep this address for freeing later */ -+ HalDev->TcbStart[Ch][Queue] = AllTcb; -+ } -+ else -+ { -+ /* if the memory has already been allocated, simply reuse it! */ -+ AllTcb = HalDev->TcbStart[Ch][Queue]; -+ } -+ -+ /* align to cache line */ -+ AllTcb = (char *)(((bit32u)AllTcb + 0xf) &~ 0xf); /*PITS #143 MJH~030522*/ -+ -+ /* default High priority transmit queue */ -+ HalDev->TcbPool[Ch][Queue]=0; -+ for(i=0;i<Num;i++) -+ { -+ /*pTcb=(HAL_TCB *) OsFunc->MallocDmaXfer(sizeof(HAL_TCB),0,0xffffffff); */ -+ pTcb= (HAL_TCB *)(AllTcb + (i*tcbSize)); -+ pTcb->mode=0; -+ pTcb->BufPtr=0; -+ pTcb->Next=HalDev->TcbPool[Ch][Queue]; -+ pTcb->Off_BLen=0; -+ HalDev->TcbPool[Ch][Queue]=pTcb; -+ } -+ /*HalDev->TcbEnd = pTcb;*/ -+ } -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/* -+ * This function allocates receive buffer descriptors (internal CPHAL function). -+ * After allocation, the function 'queues' (gives to the hardware) the newly -+ * created receive buffers to enable packet reception. -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param Ch Channel number. -+ * -+ * @return 0 OK, Non-Zero Not OK -+ */ -+static int InitRcb(HAL_DEVICE *HalDev, int Ch) -+ { -+ int i, Num = HalDev->ChData[Ch].RxNumBuffers; -+ int Size = HalDev->ChData[Ch].RxBufSize; -+ HAL_RCB *pRcb; -+ char *pBuf; -+ char *AllRcb; -+ int rcbSize; -+ int DoMalloc = 0; -+ int SizeMalloc; -+ int MallocSize; -+ -+ rcbSize = (sizeof(HAL_RCB)+0xf)&~0xf; -+ SizeMalloc = (rcbSize*Num)+0xf; -+ -+ if (HalDev->RcbStart[Ch] == 0) -+ { -+ DoMalloc = 1; -+ -+ /* malloc all RCBs at once */ -+ AllRcb= (char *)HalDev->OsFunc->MallocDmaXfer(SizeMalloc,0,0xffffffff); -+ if (!AllRcb) -+ { -+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RCB_MALLOC_FAILED); -+ } -+ -+ HalDev->OsFunc->Memset(AllRcb, 0, SizeMalloc); -+ -+ /* keep this address for freeing later */ -+ HalDev->RcbStart[Ch] = AllRcb; -+ } -+ else -+ { -+ /* if the memory has already been allocated, simply reuse it! */ -+ AllRcb = HalDev->RcbStart[Ch]; -+ } -+ -+ /* align to cache line */ -+ AllRcb = (char *)(((bit32u)AllRcb + 0xf)&~0xf); /*PITS #143 MJH~030522*/ -+ -+ HalDev->RcbPool[Ch]=0; -+ for(i=0;i<Num;i++) -+ { -+ pRcb = (HAL_RCB *)(AllRcb + (i*rcbSize)); -+ -+ if (DoMalloc == 1) -+ { -+ -+ MallocSize = Size; /*~3.01 */ -+ pBuf= (char *) HalDev->OsFunc->MallocRxBuffer(MallocSize,0,0xF,HalDev->ChData[Ch].OsSetup, (void *)pRcb, (void *)&pRcb->OsInfo, (void *) HalDev->OsDev); -+ if(!pBuf) -+ { -+ return(EC_CPPI|EC_FUNC_HAL_INIT|EC_VAL_RX_BUFFER_MALLOC_FAILED); -+ } -+ /* -RC3.01 pBuf = (char *)(((bit32u)pBuf+0xF) & ~0xF); */ -+ pRcb->BufPtr=VirtToPhys(pBuf) - HalDev->offset; -+ pRcb->DatPtr=pBuf; -+ /*pRcb->BufSize=Size;*/ -+ } -+ pRcb->mode=0; -+ pRcb->Ch=Ch; -+ pRcb->Next=(void *)HalDev->RcbPool[Ch]; -+ pRcb->Off_BLen=0; -+ pRcb->HalDev = HalDev; -+ HalDev->RcbPool[Ch]=pRcb; -+ } -+ -+ /* Give all of the Rx buffers to hardware */ -+ -+ while(HalDev->RcbPool[Ch]) -+ { -+ pRcb=HalDev->RcbPool[Ch]; -+ HalDev->RcbPool[Ch]=pRcb->Next; -+ pRcb->Eop=(void*)pRcb; -+ pRcb->FragCount=1; -+ halRxReturn((HAL_RECEIVEINFO *)pRcb, 0); -+ } -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function transmits the data in FragList using available transmit -+ * buffer descriptors. More information on the use of the Mode parameter -+ * is available in the module-specific appendices. Note: The OS should -+ * not call Send() for a channel that has been requested to be torndown. -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param FragList Fragment List structure. -+ * @param FragCount Number of fragments in FragList. -+ * @param PacketSize Number of bytes to transmit. -+ * @param OsSendInfo OS Send Information structure. <BR> -+ * @param Mode 32-bit value with the following bit fields: <BR> -+ * 31-16: Mode (used for module specific data). <BR> -+ * 15-08: Queue (transmit queue to send on). <BR> -+ * 07-00: Channel (channel number to send on). -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_NOT_LINKED "EC_VAL_NOT_LINKED"<BR> -+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR> -+ * @ref EC_VAL_OUT_OF_TCBS "EC_VAL_OUT_OF_TCBS"<BR> -+ * @ref EC_VAL_NO_TCBS "EC_VAL_NO_TCBS"<BR> -+ */ -+static int halSend(HAL_DEVICE *HalDev,FRAGLIST *FragList, -+ int FragCount,int PacketSize, OS_SENDINFO *OsSendInfo, -+ bit32u Mode) -+ { -+ HAL_TCB *tcb_ptr, *head; -+ int i; -+ bit32u base = HalDev->dev_base; -+ int rc = EC_NO_ERRORS; -+ int Ch = Mode & 0xFF; -+ int Queue = (Mode>>8)&0xFF; -+ -+ int WaitFlag = (Mode>>30)&1; /* This is for AAL5 testing only */ /* ~GSG 030508 */ -+ int Offset = (FragList[0].len >> 16); -+ int PktType = (Mode>>16)&3; /* 0=AAL5, 1=Null AAL, 2=OAM, 3=Transparent */ /* +GSG 030508 */ -+ int AtmHeaderInData = (Mode>>31)&1; /* +GSG 030508 */ -+ int FragIndex = 0; -+ -+ if (HalDev->State != enOpened) -+ return(EC_CPPI|EC_FUNC_SEND|EC_VAL_INVALID_STATE); -+ -+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0) /*MJH~030611*/ /*PITS 148*/ -+ return(EC_AAL5 |EC_FUNC_SEND|EC_VAL_INVALID_CH); /*+GSG 030303*/ -+ -+ HalDev->OsFunc->CriticalOn(); -+ -+ tcb_ptr = head = HalDev->TcbPool[Ch][Queue]; -+ -+ if (tcb_ptr) -+ { -+ -+ /* these two TCB words are only valid on SOP */ -+ if (AtmHeaderInData == 1) -+ { -+ tcb_ptr->AtmHeader = 0; /* bug fix for transparent mode PTI problem */ -+ /* Expect AtmHeader in the data */ -+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 24; -+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 16; -+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++) << 8; -+ tcb_ptr->AtmHeader |= *((bit8u *)FragList[FragIndex].data++); -+ -+ /* decrement data buffer length accordingly */ -+ FragList[FragIndex].len -= ATM_HEADER_SIZE; -+ -+ /* if the first fragment was ATM Header only, go to next fragment for loop */ -+ if (FragList[FragIndex].len == 0) -+ FragIndex++; -+ -+ /* No CPCS_UU/CPI if not AAL5 */ -+ tcb_ptr->Word5 = ((PktType & 0x3)<<16); -+ } -+ else -+ { -+ /* calculate AtmHeader from fields */ -+ tcb_ptr->AtmHeader = atmheader(HalDev->ChData[Ch].Gfc, /* ~GSG 030306 */ -+ HalDev->ChData[Ch].Vpi, HalDev->ChData[Ch].Vci, -+ HalDev->ChData[Ch].Pti, HalDev->ChData[Ch].Clp); -+ -+ tcb_ptr->Word5 = HalDev->ChData[Ch].CpcsUU | ((HalDev->ChData[Ch].PktType &0x3)<<16); -+ } -+ -+ for (i=FragIndex; i<FragCount; i++) -+ -+ { -+ /* Setup Tx mode and size */ -+ tcb_ptr->HNext = VirtToPhys((bit32 *)tcb_ptr->Next) - HalDev->offset; -+ tcb_ptr->Off_BLen = FragList[i].len; -+ -+ if (i==0) -+ tcb_ptr->Off_BLen |= (Offset << 16); -+ -+ tcb_ptr->mode = 0; /* MUST clear this for each frag !!! */ -+ tcb_ptr->BufPtr = VirtToPhys((bit32 *)FragList[i].data) - -+ HalDev->offset; -+ -+ /* first fragment */ -+ if (i == 0) -+ { -+ tcb_ptr->mode |= CB_SOF_BIT; -+ -+ } -+ -+ tcb_ptr->mode |= (PacketSize | CB_OWNERSHIP_BIT); -+ tcb_ptr->OsInfo = OsSendInfo; -+ -+ if (i == (FragCount - 1)) -+ { -+ /* last fragment */ -+ tcb_ptr->mode |= CB_EOF_BIT; -+ -+ /* since this is the last fragment, set the TcbPool pointer before -+ nulling out the Next pointers */ -+ -+ HalDev->TcbPool[Ch][Queue] = tcb_ptr->Next; -+ -+ tcb_ptr->Next = 0; -+ tcb_ptr->HNext = 0; -+ -+ /* In the Tx Interrupt handler, we will need to know which TCB is EOP, -+ so we can save that information in the SOP */ -+ head->Eop = tcb_ptr; -+ -+ /* Emerald fix 10/29 */ -+ osfuncDataCacheHitWriteback((void *)tcb_ptr, 16); -+ -+ osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16); -+ -+ } -+ else -+ { -+ /* Emerald fix 10/29 */ -+ osfuncDataCacheHitWriteback((void *)tcb_ptr, 16); -+ -+ osfuncDataCacheHitWriteback((void *)((bit32u)tcb_ptr + 16), 16); -+ -+ tcb_ptr = tcb_ptr->Next; /* what about the end of TCB list?? */ -+ -+ if (tcb_ptr == 0) -+ { -+ rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_OUT_OF_TCBS; -+ goto ExitSend; -+ } -+ } -+ } /* for */ -+ -+ /* put it on the high priority queue */ -+ if (HalDev->TxActQueueHead[Ch][Queue] == 0) -+ { -+ HalDev->TxActQueueHead[Ch][Queue]=head; -+ HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr; -+/*+GSG 030303*//*+GSG 030303*/ -+ if (!HalDev->TxActive[Ch][Queue]) -+ { -+ -+ if (!WaitFlag) -+ { -+ -+ /* write CPPI TX HDP */ -+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue ))) = VirtToPhys(head) - HalDev->offset; -+ HalDev->TxActive[Ch][Queue]=TRUE; -+ -+ } -+ -+ } -+ } -+ else -+ { -+ HalDev->TxActQueueTail[Ch][Queue]->Next=head; -+ /* Emerald fix 10/29 */ -+ *((bit32u *) VirtToVirtNoCache(&HalDev->TxActQueueTail[Ch][Queue]->HNext))=VirtToPhys(head) - HalDev->offset; -+ HalDev->TxActQueueTail[Ch][Queue]=tcb_ptr; -+/*+GSG 030303*//*+GSG 030303*/ -+ } -+ rc = EC_NO_ERRORS; -+ goto ExitSend; -+ } /* if (tcb_ptr) */ -+ else -+ { -+ rc = EC_CPPI|EC_FUNC_SEND|EC_VAL_NO_TCBS; -+ goto ExitSend; -+ } -+ExitSend: -+ -+ HalDev->OsFunc->CriticalOff(); -+ return(rc); -+ } -+ -+/* -+ * This function processes receive interrupts. It traverses the receive -+ * buffer queue, extracting the data and passing it to the upper layer software via -+ * osReceive(). It handles all error conditions and fragments without valid data by -+ * immediately returning the RCB's to the RCB pool. -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param Ch Channel Number. -+ * @param MoreWork Flag that indicates that there is more work to do when set to 1. -+ * -+ * @return 0 if OK, non-zero otherwise. -+ */ -+static int RxInt(HAL_DEVICE *HalDev, int Ch, int *MoreWork) -+ { -+ HAL_RCB *CurrentRcb, *LastRcb=0, *SopRcb, *EofRcb, *EopRcb; -+ bit32u RxBufStatus,PacketsServiced, RxPktLen = 0, RxSopStatus, -+ FrmFrags, TotalFrags, CurrDmaLen, DmaLen, FrmLen; -+ int base = HalDev->dev_base, Ret; -+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc; -+ int RxServiceMax = HalDev->ChData[Ch].RxServiceMax; -+ int FragIndex; /* +GSG 030508 */ -+ int EarlyReturn = 0; /* +GSG 030521 */ -+ -+ bit32u PktType, ExpDmaSize, Cells; -+ int PassHeader=0; -+ -+ int mode; -+ -+ bit32u SopOffset; -+ -+ if(HalDev->NeedsCount) /* +MJH 030410 */ -+ NeedsCheck(HalDev); /* +MJH 030410 */ -+ -+ /* Handle case of teardown interrupt */ -+ if (HalDev->RxTeardownPending[Ch] != 0) -+ { -+ Ret = RxTeardownInt(HalDev, Ch); -+ if (Ret == 0) -+ { /*+GSG 030303*/ -+ *MoreWork = 0; /* bug fix 1/6 */ /*+GSG 030303*/ -+ return (EC_NO_ERRORS); -+ } /*+GSG 030303*/ -+ } -+ -+ CurrentRcb=HalDev->RxActQueueHead[Ch]; -+ -+ osfuncDataCacheHitInvalidate((void*)CurrentRcb, 16); -+ -+ RxBufStatus=CurrentRcb->mode; -+ -+ /* I think I need to do this to ensure that i read UuCpi properly, -+ which is on the second cache line of the Rcb */ -+ osfuncDataCacheHitInvalidate((void*)((bit32u)CurrentRcb+16), 16); -+ -+ PacketsServiced=0; -+ HalDev->InRxInt[Ch]=TRUE; -+ -+ while((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)&& -+ (PacketsServiced<RxServiceMax)) /* ~GSG 030307 */ -+ { -+ -+ PacketsServiced++; /* ~GSG 030307 */ -+ SopRcb=CurrentRcb; -+ RxSopStatus=RxBufStatus; -+ -+ RxPktLen = RxSopStatus&CB_SIZE_MASK; -+ /* Not sure what MAC needs to do for next block */ -+ -+ PktType=((SopRcb->UuCpi & 0x00030000) >> 16); /* GSG ~030508 */ -+ /* Calculate the expected DMA length */ -+ if (RxPktLen != 0) -+ { -+ Cells=RxPktLen/48; -+ if ((RxPktLen%48) > 40) -+ Cells++; -+ if (PktType == PKT_TYPE_AAL5) /* ~GSG 030508 */ -+ Cells++; -+ ExpDmaSize=Cells*48; -+ } -+ else -+ { -+ ExpDmaSize=0; -+ } -+ -+ SopOffset=(SopRcb->Off_BLen&CB_OFFSET_MASK)>>16; -+ -+ CurrDmaLen=0; -+ FrmFrags=0; -+ TotalFrags=0; -+ FragIndex=0; -+ FrmLen=0; -+ EofRcb=0; -+ -+/* +GSG 030508 */ -+ if ((PktType == PKT_TYPE_OAM) || (PktType == PKT_TYPE_TRANS)) /* +GSG 030508 */ -+ { /* +GSG 030508 */ -+ /* first frag is ATM Header */ /* +GSG 030508 */ -+ PassHeader = 1; /* +GSG 030508 */ -+ HalDev->fraglist[FragIndex].data = (void *)&SopRcb->AtmHeader; /* +GSG 030508 */ -+ HalDev->fraglist[FragIndex].len = 4; /* +GSG 030508 */ -+ HalDev->fraglist[FragIndex].OsInfo = SopRcb->OsInfo; /* +GSG 030701 */ -+ FragIndex++; /* +GSG 030508 */ -+ } /* +GSG 030508 */ -+/* +GSG 030508 */ -+ -+ do -+ { -+ -+ DmaLen=CurrentRcb->Off_BLen&CB_SIZE_MASK; -+ -+ CurrDmaLen+=DmaLen; -+ FrmLen+=DmaLen; -+ TotalFrags++; -+ if (!EofRcb) -+ { -+ HalDev->fraglist[FragIndex].data=((char *)CurrentRcb->DatPtr); /* ~GSG 030508 */ -+ -+ HalDev->fraglist[FragIndex].data+=((FrmFrags==0)?SopOffset:0); /* ~GSG 030508 */ -+ -+ HalDev->fraglist[FragIndex].len=DmaLen; /* ~GSG 030508 */ -+ -+ /* GSG 12/9 */ -+ HalDev->fraglist[FragIndex].OsInfo = CurrentRcb->OsInfo; /* ~GSG 030508 */ -+ -+ /* Upper layer must do the data invalidate */ -+ -+ FrmFrags++; -+ FragIndex++; /* ~GSG 030508 */ -+ if (FrmLen>=RxPktLen) -+ EofRcb=CurrentRcb; -+ } -+ LastRcb=CurrentRcb; -+ CurrentRcb=LastRcb->Next; -+ if (CurrentRcb) -+ { -+ osfuncDataCacheHitInvalidate((void*)CurrentRcb,16); -+ /* RxBufStatus=CurrentRcb->mode; */ /*DRB~030522*/ -+ } -+ }while(((LastRcb->mode&CB_EOF_BIT)==0)&&(CurrentRcb)); -+ -+ /* New location for interrupt acknowledge */ -+ /* Write the completion pointer */ -+ (*(pRX_CPPI_COMP_PTR( base )+( Ch *64))) = VirtToPhys(LastRcb) - HalDev->offset; -+ -+ EopRcb=LastRcb; -+ HalDev->RxActQueueHead[Ch]=CurrentRcb; -+ HalDev->RxActQueueCount[Ch]-=TotalFrags; -+ -+ if (LastRcb->mode&CB_EOQ_BIT) -+ { -+ if (CurrentRcb) -+ { -+ -+ HalDev->Stats.RxMisQCnt[Ch]++; -+ -+ (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64))) = LastRcb->HNext; -+ } -+ else -+ { -+ -+ /* Rx EOQ */ -+ HalDev->Stats.RxMisQCnt[Ch]++; -+ -+ HalDev->RxActive[Ch]=FALSE; -+ } -+ } -+ -+ EopRcb->Next=0; -+ -+ /* setup SopRcb for the packet */ -+ SopRcb->Eop=(void*)EopRcb; -+ SopRcb->FragCount=TotalFrags; -+ -+ if ((ExpDmaSize!=CurrDmaLen)||(RxSopStatus&RX_ERROR_MASK)) -+ { -+ /* check for Rx errors (only valid on SOP) */ -+ if (RxSopStatus & RX_ERROR_MASK) -+ { -+ if (RxSopStatus & CRC_ERROR_MASK) -+ HalDev->Stats.CrcErrors[Ch]++; -+ -+ if (RxSopStatus & LENGTH_ERROR_MASK) -+ HalDev->Stats.LenErrors[Ch]++; -+ -+ if (RxSopStatus & ABORT_ERROR_MASK) -+ HalDev->Stats.AbortErrors[Ch]++; -+ -+ if (RxSopStatus & STARV_ERROR_MASK) -+ HalDev->Stats.StarvErrors[Ch]++; -+ } -+ else -+ { -+ HalDev->Stats.DmaLenErrors[Ch]++; /* different type of length error */ -+ } -+ -+ EarlyReturn = 1; -+ } -+ -+ /* do not pass up the packet if we're out of RCB's (or have an errored packet)*/ -+ if ((CurrentRcb == 0) || (EarlyReturn == 1)) -+ { -+ halRxReturn((HAL_RECEIVEINFO *)SopRcb,0); -+ } -+ else -+ { -+ -+ if (EopRcb!=EofRcb) -+ { -+ HAL_RCB *FirstEmptyRcb; -+ -+ FirstEmptyRcb = EofRcb->Next; -+ FirstEmptyRcb->Eop = (void*)EopRcb; -+ FirstEmptyRcb->FragCount = TotalFrags-FrmFrags; -+ -+ halRxReturn((HAL_RECEIVEINFO *)FirstEmptyRcb,0); -+ SopRcb->Eop=(void*)EofRcb; -+ SopRcb->FragCount=FrmFrags; -+ EofRcb->Next=0; /* Optional */ -+ } -+ -+ mode = Ch | (PktType << 16) | (PassHeader << 31); /* ~GSG 030508 */ -+ -+ OsFunc->Receive(HalDev->OsDev,HalDev->fraglist,FragIndex,RxPktLen, /* ~GSG 030508 */ -+ (HAL_RECEIVEINFO *)SopRcb,mode); -+ } /* else */ -+ -+ if (CurrentRcb) /*MJH+030522*/ -+ { -+ RxBufStatus=CurrentRcb->mode; -+ } -+ } /* while */ -+ -+ if ((CurrentRcb)&&((RxBufStatus&CB_OWNERSHIP_BIT)==0)) /*~GSG 030307*/ -+ { -+ *MoreWork = 1; -+ } -+ else -+ { -+ *MoreWork = 0; -+ } -+ -+ if (PacketsServiced != 0) -+ { -+ /* REMOVED when removing InRxInt */ -+ if ((!HalDev->RxActive[Ch]) && (HalDev->RxActQueueCount[Ch])) -+ { -+ (*(pRX_DMA_STATE_WORD_1( base )+( Ch *64))) = VirtToPhys(HalDev->RxActQueueHead[Ch]); -+ HalDev->RxActive[Ch]=TRUE; -+ } -+ } -+ -+ HalDev->InRxInt[Ch]=FALSE; -+ -+ /* update stats */ -+ HalDev->Stats.RxPacketsServiced[Ch] += PacketsServiced; -+ HalDev->Stats.RxTotal += PacketsServiced; -+ if (HalDev->Stats.RxMaxServiced < PacketsServiced) -+ HalDev->Stats.RxMaxServiced = PacketsServiced; -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/* -+ * This function processes transmit interrupts. It traverses the -+ * transmit buffer queue, detecting sent data buffers and notifying the upper -+ * layer software via osSendComplete(). (for SAR, i originally had this split -+ * into two functions, one for each queue, but joined them on 8/8/02) -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param Queue Queue number to service (always 0 for MAC, Choose 1 for SAR to service low priority queue) -+ * @param MoreWork Flag that indicates that there is more work to do when set to 1. -+ * -+ * @return 0 if OK, non-zero otherwise. -+ */ -+static int TxInt(HAL_DEVICE *HalDev, int Ch, int Queue, int *MoreWork) -+ { -+ HAL_TCB *CurrentTcb,*LastTcbProcessed,*FirstTcbProcessed; -+ int PacketsServiced; -+ bit32u TxFrameStatus; -+ int base = HalDev->dev_base, Ret; -+ int TxServiceMax = HalDev->ChData[Ch].TxServiceMax; -+ OS_FUNCTIONS *OsFunc = HalDev->OsFunc; -+ -+ int OtherQueue = Queue^1; -+ -+/*+GSG 030303*//*+GSG 030303*/ -+ -+ /* Handle case of teardown interrupt. This must be checked at -+ the top of the function rather than the bottom, because -+ the normal data processing can wipe out the completion -+ pointer which is used to determine teardown complete. */ -+ if (HalDev->TxTeardownPending[Ch] != 0) -+ { -+ Ret = TxTeardownInt(HalDev, Ch, Queue); -+ if (Ret == 0) -+ { /*+GSG 030303*/ -+ *MoreWork = 0; /* bug fix 1/6 */ /*+GSG 030303*/ -+ return (EC_NO_ERRORS); -+ } /*+GSG 030303*/ -+ } -+ -+ CurrentTcb = HalDev->TxActQueueHead[Ch][Queue]; -+ FirstTcbProcessed=CurrentTcb; -+ -+ if (CurrentTcb==0) -+ { -+ /* I saw this error a couple of times when multi-channels were added */ -+ dbgPrintf("[cppi TxInt()]TxH int with no TCB in queue!\n"); -+ dbgPrintf(" Ch=%d, CurrentTcb = 0x%08x\n", Ch, (bit32u)CurrentTcb); -+ dbgPrintf(" HalDev = 0x%08x\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ return(EC_CPPI|EC_FUNC_TXINT|EC_VAL_NULL_TCB); -+ } -+ -+ osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16); -+ TxFrameStatus=CurrentTcb->mode; -+ PacketsServiced=0; -+ -+ /* should the ownership bit check be inside of the loop?? could make it a -+ while-do loop and take this check away */ -+ if ((TxFrameStatus&CB_OWNERSHIP_BIT)==0) -+ { -+ OsFunc->CriticalOn(); /* +GSG 030307 */ -+ do -+ { -+ /* Pop TCB(s) for packet from the stack */ -+ LastTcbProcessed=CurrentTcb->Eop; -+ -+ /* new location for acknowledge */ -+ /* Write the completion pointer */ -+ (*(pTXH_CPPI_COMP_PTR( base )+( Ch *64)+( Queue ))) = VirtToPhys(LastTcbProcessed); -+ -+ HalDev->TxActQueueHead[Ch][Queue] = LastTcbProcessed->Next; -+ -+/*+GSG 030303*//*+GSG 030303*/ -+ -+ osfuncDataCacheHitInvalidate((void *)LastTcbProcessed, 16); -+ -+ if (LastTcbProcessed->mode&CB_EOQ_BIT) -+ { -+ if (LastTcbProcessed->Next) -+ { -+ /* Misqueued packet */ -+ -+ HalDev->Stats.TxMisQCnt[Ch][Queue]++; -+ -+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( Queue ))) = LastTcbProcessed->HNext; -+ } -+ else -+ { -+ /* Tx End of Queue */ -+ -+ HalDev->Stats.TxEOQCnt[Ch][Queue]++; -+ -+ HalDev->TxActive[Ch][Queue]=FALSE; -+ } -+ } -+ -+ OsFunc->SendComplete(CurrentTcb->OsInfo); -+ -+ /* Push Tcb(s) back onto the stack */ -+ CurrentTcb = LastTcbProcessed->Next; -+ -+ LastTcbProcessed->Next=HalDev->TcbPool[Ch][Queue]; -+ -+ HalDev->TcbPool[Ch][Queue]=FirstTcbProcessed; -+ -+ PacketsServiced++; -+ -+ TxFrameStatus=CB_OWNERSHIP_BIT; -+ /* set the first(SOP) pointer for the next packet */ -+ FirstTcbProcessed = CurrentTcb; -+ if (CurrentTcb) -+ { -+ osfuncDataCacheHitInvalidate((void *)CurrentTcb, 16); -+ TxFrameStatus=CurrentTcb->mode; -+ } -+ -+ }while(((TxFrameStatus&CB_OWNERSHIP_BIT)==0) -+ &&(PacketsServiced<TxServiceMax)); -+ -+ /* this fixes the SAR TurboDSL hardware bug (multiple queue failure) */ -+ if (HalDev->TxActive[Ch][OtherQueue]) -+ if (HalDev->TxActQueueHead[Ch][OtherQueue]) -+ if ((*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue ))) == 0) -+ { -+ osfuncDataCacheHitInvalidate(HalDev->TxActQueueHead[Ch][OtherQueue],16); -+ if ((HalDev->TxActQueueHead[Ch][OtherQueue]->mode) & CB_OWNERSHIP_BIT) -+ { -+ HalDev->TurboDslErrors++; -+ (*(pTX_DMA_STATE_WORD_0( base )+( Ch *64)+( OtherQueue ))) = -+ VirtToPhys(HalDev->TxActQueueHead[Ch][OtherQueue]); -+ } -+ } -+ -+ OsFunc->CriticalOff(); /* +GSG 030307 */ -+ if (((TxFrameStatus&CB_OWNERSHIP_BIT)==0) -+ &&(PacketsServiced==TxServiceMax)) -+ { -+ *MoreWork = 1; -+ } -+ else -+ { -+ *MoreWork = 0; -+ } -+ } -+ -+ /* update stats */ -+ HalDev->Stats.TxPacketsServiced[Ch][Queue] += PacketsServiced; -+ HalDev->Stats.TxTotal += PacketsServiced; -+ if (HalDev->Stats.TxMaxServiced[Ch][Queue] < PacketsServiced) -+ HalDev->Stats.TxMaxServiced[Ch][Queue] = PacketsServiced; -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function performs a teardown for the given channel. The value of the -+ * Mode parameter controls the operation of the function, as documented below. -+ * -+ * Note: If bit 3 of Mode is set, this call is blocking, and will not return -+ * until the teardown interrupt has occurred and been processed. While waiting -+ * for a blocking teardown to complete, ChannelTeardown() will signal the OS -+ * (via Control(.."Sleep"..)) to allow the OS to perform other tasks if -+ * necessary. If and only if bit 3 of Mode is clear, the CPHAL will call the -+ * OS TeardownComplete() function to indicate that the teardown has completed. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param Ch Channel number. -+ * @param Mode Bit 0 (LSB): Perform Tx teardown (if set).<BR> -+ * Bit 1: Perform Rx teardown (if set). <BR> -+ * Bit 2: If set, perform full teardown (free buffers/descriptors). -+ * If clear, perform partial teardown (keep buffers). <BR> -+ * Bit 3 (MSB): If set, call is blocking. -+ * If clear, call is non-blocking. -+ * -+ * @return EC_NO_ERRORS (ok). <BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * @ref EC_VAL_INVALID_CH "EC_VAL_INVALID_CH"<BR> -+ * @ref EC_VAL_TX_TEARDOWN_ALREADY_PEND "EC_VAL_TX_TEARDOWN_ALREADY_PEND"<BR> -+ * @ref EC_VAL_RX_TEARDOWN_ALREADY_PEND "EC_VAL_RX_TEARDOWN_ALREADY_PEND"<BR> -+ * @ref EC_VAL_TX_CH_ALREADY_TORNDOWN "EC_VAL_TX_CH_ALREADY_TORNDOWN"<BR> -+ * @ref EC_VAL_RX_CH_ALREADY_TORNDOWN "EC_VAL_RX_CH_ALREADY_TORNDOWN"<BR> -+ * @ref EC_VAL_TX_TEARDOWN_TIMEOUT "EC_VAL_TX_TEARDOWN_TIMEOUT"<BR> -+ * @ref EC_VAL_RX_TEARDOWN_TIMEOUT "EC_VAL_RX_TEARDOWN_TIMEOUT"<BR> -+ * @ref EC_VAL_LUT_NOT_READY "EC_VAL_LUT_NOT_READY"<BR> -+ */ -+static int halChannelTeardown(HAL_DEVICE *HalDev, int Ch, bit32 Mode) -+ { -+ int DoTx, DoRx, Sleep=2048, timeout=0; /*MJH~030306*/ -+ bit32u base = HalDev->dev_base; -+ -+/* Set the module, used for error returns */ -+ -+ int Ret; -+ -+ /* AAL5 only supports tearing down both sides at once (currently)*/ -+ Mode = (Mode | TX_TEARDOWN | RX_TEARDOWN); -+ -+ DoTx = (Mode & TX_TEARDOWN); -+ DoRx = (Mode & RX_TEARDOWN); -+ -+ if (HalDev->State < enInitialized) -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_STATE); -+ -+ if ((Ch < 0) || (Ch > MAX_AAL5_CHAN )) -+ { -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH); -+ } -+ -+ /* set teardown pending bits before performing the teardown, because they -+ will be used in the int handler (this is done for AAL5) */ -+ if (DoTx) -+ { -+ if (HalDev->TxTeardownPending[Ch] != 0) -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_ALREADY_PEND); -+ -+ /* If a full teardown, this also means that the user must -+ setup all channels again to use them */ -+ if (Mode & FULL_TEARDOWN) -+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0; -+ -+ if (HalDev->State < enOpened) -+ { -+ /* if the hardware has never been opened, the channel has never actually -+ been setup in the hardware, so I just need to reset the software flag -+ and leave */ -+ HalDev->ChIsSetup[Ch][DIRECTION_TX] = 0; -+ return (EC_NO_ERRORS); -+ } -+ else -+ { -+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == 0) -+ { -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_CH_ALREADY_TORNDOWN); -+ } -+ -+ /* set teardown flag */ -+ HalDev->TxTeardownPending[Ch] = Mode; -+ } -+ } -+ -+ if (DoRx) -+ { -+ if (HalDev->RxTeardownPending[Ch] != 0) -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_ALREADY_PEND); -+ -+ if (Mode & FULL_TEARDOWN) -+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0; -+ -+ if (HalDev->State < enOpened) -+ { -+ HalDev->ChIsSetup[Ch][DIRECTION_RX] = 0; -+ return (EC_NO_ERRORS); -+ } -+ else -+ { -+ if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == 0) -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_CH_ALREADY_TORNDOWN); -+ -+ HalDev->RxTeardownPending[Ch] = Mode; -+ } -+ } -+ -+ /* Perform Tx Teardown Duties */ -+ if ((DoTx) && (HalDev->State == enOpened)) -+ { -+ /* Request TX channel teardown */ -+ (TX_CPPI_TEARDOWN_REG( base )) = Ch; -+ -+ /* wait until teardown has completed */ -+ if (Mode & BLOCKING_TEARDOWN) -+ { -+ timeout = 0; -+ while (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) -+ { -+ osfuncSleep(&Sleep); -+ -+ timeout++; -+ if (timeout > 100000) -+ { -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_TX_TEARDOWN_TIMEOUT); -+ } -+ } -+ } -+ } /* if DoTx */ -+ -+ /* Perform Rx Teardown Duties */ -+ if ((DoRx) && (HalDev->State == enOpened)) -+ { -+ -+ /* call main teardown routine for Rx */ -+ Ret = HalDev->SarFunc->ChannelTeardown(HalDev->SarDev, Ch, Mode); -+ if (Ret) return (Ret); -+ -+ if (Mode & BLOCKING_TEARDOWN) -+ { -+ timeout = 0; -+ while (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE) -+ { -+ osfuncSleep(&Sleep); -+ -+ timeout++; -+ if (timeout > 100000) -+ { -+ return(EC_AAL5 |EC_FUNC_CHTEARDOWN|EC_VAL_RX_TEARDOWN_TIMEOUT); -+ } -+ } -+ } -+ } /* if DoRx */ -+ -+ return (EC_NO_ERRORS); -+ } -+ -+/** -+ * @ingroup CPHAL_Functions -+ * This function closes the CPHAL module. The module will be reset. -+ * The Mode parameter should be used to determine the actions taken by -+ * Close(). -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * @param Mode Indicates actions to take on close. The following integer -+ * values are valid: <BR> -+ * 1: Does not free buffer resources, init parameters remain -+ * intact. User can then call Open() without calling Init() -+ * to attempt to reset the device and bring it back to the -+ * last known state.<BR> -+ * 2: Frees the buffer resources, but keeps init parameters. This -+ * option is a more aggressive means of attempting a device reset. -+ * 3: Frees the buffer resources, and clears all init parameters. <BR> -+ * At this point, the caller would have to call to completely -+ * reinitialize the device (Init()) before being able to call -+ * Open(). Use this mode if you are shutting down the module -+ * and do not plan to restart. -+ * -+ * @return EC_NO_ERRORS (ok).<BR> -+ * Possible Error Codes:<BR> -+ * @ref EC_VAL_INVALID_STATE "EC_VAL_INVALID_STATE"<BR> -+ * Any error code from halChannelTeardown().<BR> -+ */ -+static int halClose(HAL_DEVICE *HalDev, bit32 Mode) -+ { -+ int Ch, Inst, Ret; -+ OS_DEVICE *TmpOsDev; -+ OS_FUNCTIONS *TmpOsFunc; -+ HAL_FUNCTIONS *TmpHalFunc; -+ char *TmpDeviceInfo; -+ -+ CPSAR_FUNCTIONS *TmpSarFunc; -+ CPSAR_DEVICE *TmpSarDev; -+ -+ /* Verify proper device state */ -+ if (HalDev->State != enOpened) -+ return (EC_AAL5 | EC_FUNC_CLOSE|EC_VAL_INVALID_STATE); -+ -+ /* Teardown all open channels */ -+ for (Ch = 0; Ch <= MAX_AAL5_CHAN ; Ch++) -+ { -+ if (HalDev->ChIsOpen[Ch][DIRECTION_TX] == TRUE) -+ { -+ if (Mode == 1) -+ { -+ Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN); -+ if (Ret) return (Ret); -+ } -+ else -+ { -+ Ret = halChannelTeardown(HalDev, Ch, TX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN); -+ if (Ret) return (Ret); -+ } -+ } -+ -+ if (HalDev->ChIsOpen[Ch][DIRECTION_RX] == TRUE) -+ { -+ if (Mode == 1) -+ { -+ Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | PARTIAL_TEARDOWN | BLOCKING_TEARDOWN); -+ if (Ret) return (Ret); -+ } -+ else -+ { -+ Ret = halChannelTeardown(HalDev, Ch, RX_TEARDOWN | FULL_TEARDOWN | BLOCKING_TEARDOWN); -+ if (Ret) return (Ret); -+ } -+ } -+ } -+ -+ /* free fraglist in HalDev */ -+ HalDev->OsFunc->Free(HalDev->fraglist); -+ HalDev->fraglist = 0; -+ -+ /* unregister the interrupt */ -+ HalDev->OsFunc->IsrUnRegister(HalDev->OsDev, HalDev->interrupt); -+ -+ /* Disable the Tx CPPI DMA */ -+ TX_CPPI_CTL_REG(HalDev->dev_base) = 0; -+ -+ /* Disable the Rx CPPI DMA */ -+ RX_CPPI_CTL_REG(HalDev->dev_base) = 0; -+ -+ /* Close the SAR hardware - puts the device in reset if this module is the -+ "last one out" */ -+ HalDev->SarFunc->Close(HalDev->SarDev, Mode); -+ -+ /* If mode is 3, than clear the HalDev and set next state to DevFound*/ -+ if (Mode == 3) -+ { -+ /* I need to keep the HalDev parameters that were setup in InitModule */ -+ TmpOsDev = HalDev->OsDev; -+ TmpOsFunc = HalDev->OsFunc; -+ TmpDeviceInfo = HalDev->DeviceInfo; -+ -+ TmpSarFunc = HalDev->SarFunc; -+ TmpSarDev = HalDev->SarDev; -+ -+ TmpHalFunc = HalDev->HalFuncPtr; -+ Inst = HalDev->Inst; -+ -+ /* Clear HalDev */ -+ -+ HalDev->OsFunc->Memset(HalDev, 0, sizeof(HAL_DEVICE)); -+ -+ /* Restore key parameters */ -+ HalDev->OsDev = TmpOsDev; -+ HalDev->OsFunc = TmpOsFunc; -+ HalDev->DeviceInfo = TmpDeviceInfo; -+ -+ HalDev->SarFunc = TmpSarFunc; -+ HalDev->SarDev = TmpSarDev; -+ -+ HalDev->HalFuncPtr = TmpHalFunc; -+ HalDev->Inst = Inst; -+ -+ HalDev->State = enDevFound; -+ } -+ else -+ { -+ HalDev->State = enInitialized; -+ } -+ -+ return(EC_NO_ERRORS); -+ } -diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c ---- linux.old/drivers/atm/sangam_atm/cpremap_cpaal5.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpaal5.c 2005-08-23 04:46:50.084845672 +0200 -@@ -0,0 +1,27 @@ -+#ifndef _INC_CPREMAP_C -+#define _INC_CPREMAP_C -+ -+#ifdef __ADAM2 -+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size) -+ { -+ asm(" cache 17, (%0)" : : "r" (ptr)); -+ } -+ -+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size) -+ { -+ asm(" cache 25, (%0)" : : "r" (ptr)); -+ } -+ -+#else -+ #define osfuncDataCacheHitInvalidate(MemPtr, Size) HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size) -+ #define osfuncDataCacheHitWriteback(MemPtr, Size) HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size) -+#endif -+ -+/* -+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache 17, (%0)" : : "r" (ptr)) -+#define osfuncDataCacheHitWriteback(ptr, Size) asm(" cache 25, (%0)" : : "r" (ptr)) -+*/ -+ -+ -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c ---- linux.old/drivers/atm/sangam_atm/cpremap_cpsar.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpremap_cpsar.c 2005-08-23 04:46:50.084845672 +0200 -@@ -0,0 +1,27 @@ -+#ifndef _INC_CPREMAP_C -+#define _INC_CPREMAP_C -+ -+#ifdef __ADAM2 -+static inline void osfuncDataCacheHitInvalidate(void *ptr, int Size) -+ { -+ asm(" cache 17, (%0)" : : "r" (ptr)); -+ } -+ -+static inline void osfuncDataCacheHitWriteback(void *ptr, int Size) -+ { -+ asm(" cache 25, (%0)" : : "r" (ptr)); -+ } -+ -+#else -+ #define osfuncDataCacheHitInvalidate(MemPtr, Size) HalDev->OsFunc->DataCacheHitInvalidate(MemPtr, Size) -+ #define osfuncDataCacheHitWriteback(MemPtr, Size) HalDev->OsFunc->DataCacheHitWriteback(MemPtr, Size) -+#endif -+ -+/* -+#define osfuncDataCacheHitInvalidate(ptr, Size) asm(" cache 17, (%0)" : : "r" (ptr)) -+#define osfuncDataCacheHitWriteback(ptr, Size) asm(" cache 25, (%0)" : : "r" (ptr)) -+*/ -+ -+ -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/cpsar.c linux.dev/drivers/atm/sangam_atm/cpsar.c ---- linux.old/drivers/atm/sangam_atm/cpsar.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpsar.c 2005-08-23 04:46:50.086845368 +0200 -@@ -0,0 +1,881 @@ -+/** -+ * cpsar.c -+ * -+ * TNETDxxxx Software Support\n -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * This file contains the HAL for the CPSAR module. In the software -+ * architecture, the CPSAR module is used exclusively by the AAL5 and AAL2 -+ * CPHAL modules. AAL5 and AAL2 may utilize the same CPSAR instance -+ * simulataneously. -+ * -+ * version -+ * 5Sep02 Greg 1.00 Original Version created. -+ */ -+ -+/* register files */ -+#include "cp_sar_reg.h" -+ -+#define _CPHAL_CPSAR -+#define _CPHAL -+ -+#define WAIT_THRESH 200000 -+#define IRAM_SIZE 1536 -+#define MAX_INST 2 -+ -+/* OS Data Structure definition */ -+ -+typedef void OS_PRIVATE; -+typedef void OS_DEVICE; -+typedef void OS_SENDINFO; -+typedef void OS_RECEIVEINFO; -+typedef void OS_SETUP; -+ -+/* CPHAL Data Structure definitions */ -+ -+typedef struct cpsar_device CPSAR_DEVICE; -+typedef struct cpsar_device HAL_DEVICE; -+typedef void HAL_RECEIVEINFO; -+ -+#define MAX_QUEUE 2 -+#define MAX_CHAN 19 -+ -+#include "cpcommon_cpsar.h" -+#include "cpswhal_cpsar.h" -+#include "cpsar.h" -+#include "cpcommon_cpsar.c" -+ -+static CPSAR_DEVICE *CpsarDev[MAX_INST]= {0,0}; -+ -+/* -+ * Returns statistics information. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 -+ */ -+static int StatsGet3(CPSAR_DEVICE *HalDev) -+ { -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]StatsGet3(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ /* -+ dbgPrintf("CPSAR General Stats:\n"); -+ DispHexStat(HalDev, "Base Address",HalDev->dev_base); -+ DispStat(HalDev, "Offset (VLYNQ)",HalDev->offset); -+ DispStat(HalDev, "Debug Level",HalDev->debug); -+ DispStat(HalDev, "Instance",HalDev->Inst); -+ DispHexStat(HalDev, "Reset Address",HalDev->ResetBase); -+ DispStat(HalDev, "Reset Bit",HalDev->ResetBit); -+ */ -+ return (EC_NO_ERRORS); -+ } -+ -+/* +GSG 030407 */ -+static void SetOamMode(HAL_DEVICE *HalDev) -+ { -+ int Ch; -+ volatile bit32u *pTmp; -+ int OamMode = (1<<8); -+ -+ /* any configuration of OamMode affects all VC's, including AAL2 */ -+ for (Ch = 0; Ch < MAX_CHAN; Ch++) -+ { -+ if (Ch < 16) -+ pTmp = (pPDSP_AAL5_RX_STATE_WORD_0(HalDev->dev_base) + (Ch*64)); -+ else -+ pTmp = (pPDSP_AAL2_RX_STATE_WORD_0(HalDev->dev_base) + ((Ch-16)*64)); -+ -+ if (HalDev->OamMode == 0) -+ { -+ *pTmp &=~ OamMode; -+ } -+ else -+ { -+ *pTmp |= OamMode; -+ } -+ } -+ } -+ -+static int halControl(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value) -+ { -+ int KeyFound=0, ActionFound=0, rc=EC_NO_ERRORS, Ch; /* +RC3.02*/ -+ char *TmpKey = (char *)Key; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halControl(HalDev:%08x, Key:%s, Action:%s, Value:%08x)\n", (bit32u)HalDev, -+ Key, Action, (bit32u)Value); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ if (HalDev->OsFunc->Strcmpi(Key, "Debug") == 0) -+ { -+ KeyFound=1; /* +RC3.02*/ -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; /* +RC3.02*/ -+ HalDev->debug = *(int *)Value; -+ } -+ } -+ -+ /* +GSG 030407 */ -+ if (HalDev->OsFunc->Strcmpi(Key, "OamMode") == 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ HalDev->OamMode = *(int *)Value; -+ -+ /* only do this if we're open */ -+ if (HalDev->OpenCount > 0) -+ SetOamMode(HalDev); -+ } -+ -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ { -+ ActionFound=1; -+ *(int *)Value = HalDev->OamMode; -+ } -+ } -+ -+ if (HalDev->OsFunc->Strcmpi(Key, "Stats3") == 0) -+ { -+ if (HalDev->OsFunc->Strcmpi(Action, "Get") == 0) -+ StatsGet3(HalDev); -+ } -+ -+ /* +RC3.02 (if statement) */ -+ /* Fixes PITS #98 */ -+ if (HalDev->OsFunc->Strstr(Key, "PdspEnable") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* Configure PDSP enable bit based on Value*/ -+ if (*(int *)Value & 1) -+ { -+ /* enable PDSP */ -+ PDSP_CTRL_REG(HalDev->dev_base) |= 0x2; -+ } -+ else -+ { -+ /* disable PDSP */ -+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x2; -+ } -+ } -+ } -+ -+ if (HalDev->OsFunc->Strstr(Key, "FwdUnkVc.") != 0) -+ { -+ KeyFound=1; -+ if (HalDev->OsFunc->Strcmpi(Action, "Set") == 0) -+ { -+ ActionFound=1; -+ -+ /* extract channel number */ -+ TmpKey += HalDev->OsFunc->Strlen("FwdUnkVc."); -+ Ch = HalDev->OsFunc->Strtoul(TmpKey, &TmpKey, 10); -+ -+ /* Configure forwarding of unknown VCI/VPI cells */ -+ SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = (((*(int*)Value)<<31) | Ch); -+ } -+ } -+ -+ if (KeyFound == 0) /* +RC3.02 */ -+ rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_KEY_NOT_FOUND); /* +RC3.02 */ -+ -+ if (ActionFound == 0) /* +RC3.02 */ -+ rc = (EC_CPSAR|EC_FUNC_CONTROL|EC_VAL_ACTION_NOT_FOUND); /* +RC3.02 */ -+ -+ return(rc); /* ~RC3.02 */ -+ } -+ -+/* -+ * This function opens the specified channel. -+ * -+ * @param HalDev CPHAL module instance. (set by cphalInitModule()) -+ * @param Ch Channel number. -+ * -+ * @return 0 OK, Non-zero Not OK -+ */ -+static int halChannelSetup(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh) -+ { -+ int i; -+ int Ch = HalCh->Channel; -+ int PdspChBlock = Ch; -+ int PdspBlockOffset = 0; -+ volatile bit32u *pTmp; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halChannelSetup(HalDev:%08x, HalCh:%08x)\n", (bit32u)HalDev, -+ (bit32u)HalCh); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Figure out the correct offset from the start of the PDSP -+ Scratchpad RAM (starting at 0x8050 in the SAR) */ -+ if (Ch > 15) -+ { -+ /* this is an AAL2 channel, which are channels 16-18 */ -+ PdspChBlock = Ch - 16; -+ /* Get the offset to the AAL2 portion of the block (in words) */ -+ PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + (PdspChBlock*64); -+ /* Clear PDSP State RAM */ -+ /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset); -+ for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++) -+ *pTmp++ = 0;*/ -+ } -+ else -+ { -+ /* Get the offset to the AAL5 portion of the block (in words) */ -+ PdspBlockOffset = (PdspChBlock*64); -+ /* Clear PDSP State RAM */ -+ /*pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset); -+ for (i=0; i<NUM_PDSP_AAL5_STATE_WORDS; i++) -+ *pTmp++ = 0;*/ -+ } -+ -+ /* Configure PDSP State RAM */ -+ -+ /* Setup TX PDSP State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset); -+ *pTmp++ = HalCh->TxVc_CellRate; /* Set the cell rate in cells/sec */ -+ *pTmp++ = HalCh->TxVc_QosType; /* Configure the QoS Type */ -+ *pTmp++ = HalCh->TxVc_Mbs; /* Set minimum burst size */ -+ *pTmp++ = 0; /* (skip a register) */ -+ *pTmp++ = HalCh->TxVc_Pcr; /* set the peak cell rate */ -+ *pTmp++ = 0; /* new addition 4.9.02 */ -+ *pTmp++ = HalCh->TxVc_AtmHeader; /* give the ATM header */ -+ *pTmp++ = (HalCh->TxVc_OamTc << 8) -+ |(HalCh->TxVc_VpOffset); /* Set the OAM TC Path and VP Offset */ -+ -+ /* Setup RX PDSP State RAM */ -+ *pTmp++ = (HalCh->RxVc_OamCh)| -+ (HalDev->OamMode << 8) | -+ (HalCh->RxVc_OamToHost<<9); /* Set OAM Channel, Mode, and ToHost options */ -+ *pTmp++ = HalCh->RxVc_AtmHeader; /* ATM hdr put on firmware generated OAM */ -+ *pTmp++ = (HalCh->RxVc_VpOffset)| /* Set Rx OAM TC Path and VP Offset */ -+ (HalCh->RxVc_OamTc<<8); -+ -+ /* Setup TX VP PDSP State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+16); /*GSG~030703 12->16 */ -+ *pTmp++ = HalCh->TxVp_AtmHeader; -+ *pTmp++ = (HalCh->TxVp_OamTc << 8); -+ -+ /* Setup RX VP PDSP State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset+20); /*GSG~030703 16->20 */ -+ *pTmp++ = HalCh->RxVp_AtmHeader; -+ *pTmp++ = (HalCh->RxVp_OamCh)| -+ (HalCh->RxVp_OamTc<<8)| -+ (HalCh->RxVp_OamToHost<<9); /* Set OAM Channel, Mode, and ToHost options */ -+ *pTmp++ = 0; -+ *pTmp++ = HalCh->RxVp_OamVcList; -+ -+ /* Configure forwarding of unknown VCI/VPI cells */ -+ if (HalCh->PktType == 3) -+ SAR_PDSP_FWD_UNK_VC_REG(HalDev->dev_base) = ((HalCh->FwdUnkVc<<31)|Ch); -+ -+ /* Configure Tx Channel Mapping Register (turn channel "ON") */ -+ TX_CH_MAPPING_REG(HalDev->dev_base) = 0x80000000 | -+ (HalCh->DaMask << 30) -+ | (HalCh->Priority << 24) | Ch; -+ -+ /* Setup Rx Channel in the LUT */ -+ i=0; -+ while (!(RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) & 0x80000000)) -+ { -+ if (i > WAIT_THRESH) -+ { -+ return(EC_CPSAR|EC_FUNC_CHSETUP|EC_VAL_LUT_NOT_READY); -+ } -+ else -+ i++; -+ } -+ -+ /* RX LUT is ready */ -+ RX_LUT_CH_SETUP_REQ_REG(HalDev->dev_base) = (HalCh->PktType << 24) | Ch; -+ RX_LUT_CH_SETUP_REQ_VC_REG(HalDev->dev_base) = ((HalCh->Vpi << 20) | -+ (HalCh->Vci << 4)); -+ -+ return (EC_NO_ERRORS); -+ } -+ -+static int halChannelTeardown(CPSAR_DEVICE *HalDev, int Ch, bit32 Mode) -+ { -+ int waitcnt = 0; -+ int PdspBlockOffset = 0, i; -+ volatile bit32u *pTmp; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halChannelTeardown(HalDev:%08x, Ch:%d, Mode:%d\n", -+ (bit32u)HalDev, Ch, Mode); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ if ((Ch < 0) || (Ch > MAX_CHAN)) -+ return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_INVALID_CH); -+ -+ /* Request RX channel teardown through LUT */ -+ while ((RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) & 0x80000000) == 0) -+ { -+ waitcnt++; -+ if (waitcnt == WAIT_THRESH) -+ { -+ return(EC_CPSAR|EC_FUNC_CHTEARDOWN|EC_VAL_LUT_NOT_READY); -+ } -+ } -+ -+ RX_LUT_CH_TEARDOWN_REQ_REG(HalDev->dev_base) = (Ch & 0xffff); -+ -+ /* for AAL2, clear channel PDSP RAM here. AAL5 does it when the teardown -+ has completed (which is asynchronous)*/ -+ if (Ch > 15) -+ { -+ /* Get the offset to the AAL2 portion of the block (in words) */ -+ PdspBlockOffset = NUM_PDSP_AAL5_STATE_WORDS + ((Ch-16)*64); -+ /* Clear PDSP State RAM */ -+ pTmp = (pPDSP_BLOCK_0(HalDev->dev_base)+PdspBlockOffset); -+ for (i=0; i<NUM_PDSP_AAL2_STATE_WORDS; i++) -+ *pTmp++ = 0; -+ } -+ -+ return (EC_NO_ERRORS); -+ } -+ -+int InitPdsp(CPSAR_DEVICE *HalDev) -+ { -+ bit32u NumOfEntries,i,IRamAddress,iTmp; -+ int *SarPdspFirmware; /* ~GSG 030403 */ -+ int FirmwareSize, rc; /* ~GSG 030403 */ -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]InitPdsp(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Get firmware */ -+ rc = HalDev->OsFunc->Control(HalDev->OsDev, "Firmware", "Get", &SarPdspFirmware); /* ~GSG 030403 */ -+ if (rc) /* +GSG 030403 */ -+ return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND); /* +GSG 030403 */ -+ -+ /* Get firmware size */ -+ rc = HalDev->OsFunc->Control(HalDev->OsDev, "FirmwareSize", "Get", &FirmwareSize); /* ~GSG 030403 */ -+ if (rc) /* +GSG 030403 */ -+ return (EC_CPSAR|EC_FUNC_OPEN|EC_VAL_KEY_NOT_FOUND); /* +GSG 030403 */ -+ -+ IRamAddress = (bit32u) pPDSP_CTRL_REG(HalDev->dev_base); -+ -+ NumOfEntries = (FirmwareSize)/4; /* ~GSG 030403 */ -+ if (NumOfEntries > IRAM_SIZE) -+ { -+ /* Note: On Avalanche, they truncated the PDSP firmware and warned */ -+ /* NumOfEntries = IRAM_SIZE; */ -+ return(EC_CPSAR|EC_FUNC_INIT|EC_VAL_FIRMWARE_TOO_LARGE); -+ } -+ for(i=8;i<NumOfEntries;i++) -+ (*((bit32 *) (IRamAddress+(i*4))))=SarPdspFirmware[i]; /* ~GSG 030403 */ -+ -+ /* Check code */ -+ for(i=8;i<NumOfEntries;i++) -+ { -+ iTmp=(*((bit32 *) (IRamAddress+(i*4)))); -+ if (iTmp != SarPdspFirmware[i]) /* ~GSG 030403 */ -+ { -+ return(EC_CPSAR|EC_FUNC_OPEN|EC_VAL_PDSP_LOAD_FAIL); -+ } -+ } -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/* -+ * This function probes for the instance of the CPHAL module. It will call -+ * the OS function @c DeviceFindInfo() to get the information required. -+ * -+ * @param HalDev CPHAL module instance. (set by xxxInitModule()) -+ * -+ * @return 0 OK, Otherwise error. -+ */ -+static int halProbe(CPSAR_DEVICE *HalDev) -+ { -+ int Ret; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halProbe(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(1)) -+ { -+ dbgPrintf("[os]DeviceFindInfo(Inst:%d, DeviceName:%s, DeviceInfo:%08x)\n", -+ HalDev->Inst, "sar", (bit32u)&HalDev->DeviceInfo); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Attempt to find the device information */ -+ Ret = HalDev->OsFunc->DeviceFindInfo(HalDev->Inst, "sar", &HalDev->DeviceInfo); -+ if (Ret) -+ return(EC_CPSAR|EC_FUNC_PROBE|EC_VAL_DEVICE_NOT_FOUND); -+ -+ return(EC_NO_ERRORS); -+ } -+ -+#ifdef __CPHAL_DEBUG -+static void dbgConfigDump(HAL_DEVICE *HalDev) -+ { -+ dbgPrintf(" [cpsar Inst %d] Config Dump:\n", HalDev->Inst); -+ dbgPrintf(" Base :%08x, offset :%08d\n", -+ HalDev->dev_base, HalDev->offset); -+ dbgPrintf(" ResetBit:%08d, ResetBase:%08x\n", -+ HalDev->ResetBit, HalDev->ResetBase); -+ dbgPrintf(" UniNni :%08d, debug :%08d\n", -+ HalDev->ResetBit, HalDev->debug); -+ osfuncSioFlush(); -+ } -+#endif -+ -+/* -+ * Sets up HAL default configuration parameter values. -+ */ -+static void ConfigInit(CPSAR_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]ConfigInit(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ /* configure some defaults with tnetd7300 values */ -+ HalDev->dev_base = 0xa3000000; -+ HalDev->offset = 0; -+ HalDev->UniNni = CFG_UNI_NNI; -+ HalDev->ResetBit = 9; -+ HalDev->debug = 0; -+ HalDev->ResetBase = 0xa8611600; -+ } -+ -+/* -+ * Retrieve HAL configuration parameter values. -+ */ -+static bit32u ConfigGet(HAL_DEVICE *HalDev) -+ { -+ bit32u ParmValue, error_code; -+ char *DeviceInfo = HalDev->DeviceInfo; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]ConfigGet(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* get the configuration parameters common to all modules */ -+ error_code = ConfigGetCommon(HalDev); -+ if (error_code) return (EC_CPSAR|error_code); -+ -+ /* get SAR specific configuration parameters */ -+ error_code = HalDev->OsFunc->DeviceFindParmUint(DeviceInfo,"UniNni",&ParmValue); -+ if (!error_code) HalDev->UniNni = ParmValue; -+ -+ return (EC_NO_ERRORS); -+ } -+ -+static int halInit(CPSAR_DEVICE *HalDev) -+ { -+ bit32u Ret; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halInit(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(7)) -+ { -+ dbgPrintf("[cpsar halInit()]InitCount = %d\n", HalDev->InitCount); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Only run the init code for the first calling module per instance */ -+ if (HalDev->InitCount > 1) -+ { -+ return (EC_NO_ERRORS); -+ } -+ -+ /* Configure HAL defaults */ -+ ConfigInit(HalDev); -+ -+ /* Retrieve HAL configuration parameters from data store */ -+ Ret = ConfigGet(HalDev); -+ if (Ret) return (Ret); -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(9)) -+ dbgConfigDump(HalDev); -+#endif -+ -+ return(EC_NO_ERRORS); -+ } -+ -+static int halOpen(CPSAR_DEVICE *HalDev) -+ { -+ int Ret, Ticks=64; -+ int i; /*+GSG 030407*/ -+ volatile int *pTmp; /*+GSG 030407*/ -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halOpen(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(7)) -+ { -+ dbgPrintf("[cpsar halOpen()]OpenCount = %d\n", HalDev->OpenCount); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Only run the open code for the first calling module per instance */ -+ if (HalDev->OpenCount++ > 0) -+ { -+ return (EC_NO_ERRORS); -+ } -+ -+ /* Take SAR out of reset */ -+ if (((*(volatile bit32u *)(HalDev->ResetBase)) & (1<<HalDev->ResetBit)) != 0) -+ { -+ /** @todo Should I somehow call AAL5/AAL2 Close() here? All I've done -+ here is copy the Close code from each and paste it here. */ -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(7)) -+ { -+ dbgPrintf("[cpsar halOpen()]Module was already out of reset.\n"); -+ dbgPrintf(" Closing module and resetting.\n"); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Disable the Tx CPPI DMA */ -+ TX_CPPI_CTL_REG(HalDev->dev_base) = 0; -+ -+ /* Disable the Rx CPPI DMA */ -+ RX_CPPI_CTL_REG(HalDev->dev_base) = 0; -+ -+ /* Disable the PDSP */ -+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002; -+ -+ /* disable interrupt masks */ -+ SAR_TX_MASK_CLR(HalDev->dev_base) = 0xffffffff; -+ SAR_RX_MASK_CLR(HalDev->dev_base) = 0xffffffff; -+ -+#ifndef NO_RESET /* GSG+ 030428 */ -+ /* clear reset bit */ -+ (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks); -+ -+ /* set reset bit */ -+ (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks); -+#endif /* GSG+ 030428 */ -+ } -+ else -+ { -+ (*(volatile bit32u *)(HalDev->ResetBase)) |= (1<<HalDev->ResetBit); /* ~GSG 030307 */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks); -+ } -+ -+ /* Configure UNI/NNI */ -+ RX_LUT_GLOBAL_CFG_REG(HalDev->dev_base) |= (HalDev->UniNni & 0x1); -+ -+ /* Clear entire PDSP state RAM */ /*+GSG 030407*/ -+ pTmp = (pTX_DMA_STATE_WORD_0(HalDev->dev_base)); /*+GSG 030407*/ -+ for (i=0; i<PDSP_STATE_RAM_SIZE; i++) /*+GSG 030407*/ -+ *pTmp++ = 0; /*+GSG 030407*/ -+ -+ /* Configure Oam Mode */ /*+GSG 030407*/ -+ SetOamMode(HalDev); /*+GSG 030407*/ -+ -+ /* Initialize PDSP */ -+ Ret=InitPdsp(HalDev); -+ if(Ret) -+ return(Ret); -+ -+ /* Reset and Enable the PDSP */ -+ PDSP_CTRL_REG(HalDev->dev_base) = 0x00080003; -+ -+ return(EC_NO_ERRORS); -+ } -+ -+static int halClose(CPSAR_DEVICE *HalDev, int Mode) -+ { -+ int Ticks = 64; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halClose(HalDev:%08x, Mode:%d)\n", (bit32u)HalDev, Mode); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* handle the error case if there is nothing open */ -+ if (HalDev->OpenCount == 0) -+ { -+ return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_CLOSED); -+ } -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(7)) -+ { -+ dbgPrintf("[cpsar halClose()]OpenCount = %d\n", HalDev->OpenCount); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Only run the close code for the last calling module per instance */ -+ if (HalDev->OpenCount-- > 1) -+ { -+ return (EC_NO_ERRORS); -+ } -+ -+ /* Disable the PDSP */ -+ PDSP_CTRL_REG(HalDev->dev_base) &=~ 0x00000002; -+ -+#ifndef NO_RESET /* GSG +030428 */ -+ /* put device back into reset */ -+ (*(volatile bit32u *)(HalDev->ResetBase)) &=~ (1<<HalDev->ResetBit); /* ~GSG 030307 */ -+ HalDev->OsFunc->Control(HalDev->OsDev, "Sleep", "", &Ticks); -+#endif /* GSG +030428 */ -+ -+ return(EC_NO_ERRORS); -+ } -+ -+static int halShutdown(CPSAR_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halShutdown(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* handle the error case */ -+ if (HalDev->InitCount == 0) -+ { -+ return(EC_CPSAR|EC_FUNC_CLOSE|EC_VAL_MODULE_ALREADY_SHUTDOWN); -+ } -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(7)) -+ { -+ dbgPrintf("[cpsar halShutdown()]InitCount = %d\n", HalDev->InitCount); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ /* Only run the shutdown code for the last calling module per instance */ -+ if (HalDev->InitCount-- > 1) -+ { -+ return (EC_NO_ERRORS); -+ } -+ -+ /* free the SAR functions */ -+#ifdef __CPHAL_DEBUG -+ if (DBG(6)) -+ { -+ dbgPrintf(" [cpsar halShutdown()]: Free CPSAR function pointers\n"); -+ osfuncSioFlush(); -+ } -+ if (DBG(1)||DBG(3)) -+ { -+ dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev->HalFuncPtr); -+ osfuncSioFlush(); -+ } -+#endif -+ /* free the HalFunc */ -+ HalDev->OsFunc->Free(HalDev->HalFuncPtr); -+ -+ /* we have a static global, so I should clear it's value as well */ -+ CpsarDev[HalDev->Inst] = 0; -+ -+#ifdef __CPHAL_DEBUG -+ if (DBG(6)) -+ { -+ dbgPrintf(" [cpsar halShutdown()]Free HalDev\n"); -+ osfuncSioFlush(); -+ } -+ if (DBG(1)||DBG(3)) -+ { -+ dbgPrintf("[os]Free(MemPtr:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ /* free the CPSAR device */ -+ HalDev->OsFunc->Free(HalDev); -+ -+ return(EC_NO_ERRORS); -+ } -+ -+static int halTick(CPSAR_DEVICE *HalDev) -+ { -+#ifdef __CPHAL_DEBUG -+ if (DBG(0)) -+ { -+ dbgPrintf("[cpsar]halTick(HalDev:%08x)\n", (bit32u)HalDev); -+ osfuncSioFlush(); -+ } -+#endif -+ -+ return(EC_NO_ERRORS); -+ } -+ -+/* -+ * The CPSAR version of InitModule() should be passed the OS_FUNCTIONS pointer, -+ * and will return the HalDev pointer. -+ * -+ * @param HalDev Pointer to CPSAR module information. This will -+ * be used by the OS when communicating to this module via -+ * CPSAR. -+ * @param OsDev Pointer to OS device information. This will be saved by -+ * the CPSAR and returned to the OS when required. -+ * @param HalFunc HAL_FUNCTIONS pointer. -+ * @param Size Pointer to the size of the HAL_FUNCTIONS structure. (If -+ * HalFunc is 0, the value will be set by CPSAR, otherwise -+ * ignored) -+ * @param Inst The instance number of the module to initialize. (start at -+ * 0). -+ * -+ * @return 0 OK, Nonzero - error. -+ */ -+/* -+int cpsarInitModule(CPSAR_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ CPSAR_FUNCTIONS *HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int *Size, -+ int Inst) -+*/ -+int cpsarInitModule(CPSAR_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ CPSAR_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst) -+ { -+ CPSAR_DEVICE *HalPtr; -+ CPSAR_FUNCTIONS *HalFuncPtr; -+ -+ /* -+ if ( HalFunc == 0 ) -+ { -+ *Size = sizeof(CPSAR_FUNCTIONS); -+ return(EC_NO_ERRORS); -+ } -+ */ -+ -+ if (CpsarDev[Inst] != 0) -+ { -+ /* this SAR module has been connected to before, so do not -+ allocate another CPSAR_DEVICE */ -+ HalPtr = CpsarDev[Inst]; -+ -+ /* increase count of attached modules */ -+ HalPtr->InitCount++; -+ } -+ else -+ { -+ /* allocate the CPSAR_DEVICE structure */ -+ HalPtr = (CPSAR_DEVICE *) OsFunc->MallocDev(sizeof(CPSAR_DEVICE)); -+ if(!HalPtr) -+ return(EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_DEV_FAILED); -+ -+ HalFuncPtr = (CPSAR_FUNCTIONS *) OsFunc->Malloc(sizeof(CPSAR_FUNCTIONS)); -+ if (!HalFuncPtr) -+ return (EC_CPSAR|EC_FUNC_HAL_INIT|EC_VAL_MALLOC_FAILED); -+ -+ /* Initialize the size of hal functions */ -+ *HalFuncSize = sizeof (CPSAR_FUNCTIONS); -+ -+ /* ensure the device structure is cleared */ -+ OsFunc->Memset(HalPtr, 0, sizeof(CPSAR_DEVICE)); -+ -+ /* clear the function pointers */ -+ OsFunc->Memset(HalFuncPtr, 0, sizeof(CPSAR_FUNCTIONS)); -+ -+ /* Supply pointers for the CPSAR API functions */ -+ HalFuncPtr->ChannelSetup = halChannelSetup; -+ HalFuncPtr->ChannelTeardown = halChannelTeardown; -+ HalFuncPtr->Close = halClose; -+ HalFuncPtr->Control = halControl; -+ HalFuncPtr->Init = halInit; -+ HalFuncPtr->Open = halOpen; -+ HalFuncPtr->Probe = halProbe; -+ HalFuncPtr->Shutdown = halShutdown; -+ HalFuncPtr->Tick = halTick; -+ -+ /* keep a reference to HalFuncPtr so I can free it later */ -+ HalPtr->HalFuncPtr = HalFuncPtr; -+ -+ /* store the CPSAR_DEVICE, so the CPSAR module will know whether -+ it is in use for the given instance */ -+ CpsarDev[Inst] = HalPtr; -+ -+ /* increase count of attached modules */ -+ HalPtr->InitCount++; -+ } -+ -+ /* @todo Does this need modification to deal with multiple callers/ -+ drivers? If different callers will use different OsDev/OsFunc, -+ then the current code will not work. -+ */ -+ -+ /* initialize the CPSAR_DEVICE structure */ -+ HalPtr->OsDev = OsDev; -+ /*HalPtr->OsOpen = OsDev;*/ -+ HalPtr->Inst = Inst; -+ HalPtr->OsFunc = OsFunc; -+ -+ /* pass the HalPtr back to the caller */ -+ *HalDev = HalPtr; -+ *HalFunc = HalPtr->HalFuncPtr; -+ -+ return (EC_NO_ERRORS); -+ } -diff -urN linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h ---- linux.old/drivers/atm/sangam_atm/cpsar_cpaal5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpsar_cpaal5.h 2005-08-23 04:46:50.087845216 +0200 -@@ -0,0 +1,103 @@ -+/******************************************************************************* -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: cpsar.h -+ * -+ * DESCRIPTION: -+ * This file contains data structure definitions for the CPSAR HAL. -+ * -+ * HISTORY: -+ * 6Sep02 Greg 1.00 Original Version created. -+ * -+ *****************************************************************************/ -+#ifndef _INC_CPSAR -+#define _INC_CPSAR -+ -+#define NUM_RX_STATE_WORDS 7 -+#define NUM_TX_STATE_WORDS 9 -+#define MAX_CHAN 19 -+ -+ -+#ifndef _CPHAL_CPSAR -+typedef void CPSAR_DEVICE; -+#endif -+ -+/* -+ * HAL Default Parameter Values -+ */ -+#define CFG_UNI_NNI 0 -+ -+/** -+ * @ingroup shared_data -+ * -+ * List of defined keys for use with Control(). -+ */ -+typedef enum -+ { -+ /* SAR */ -+ enGET_FIRMWARE, /**< Used by the SAR to request a pointer to firmware */ -+ enGET_FIRMWARE_SIZE, /**< Used by the SAR to request the size of the firmware */ -+ enEND=9999 /* Last entry */ -+ }INFO_KEY; -+ -+/* -+ * The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh); -+ int (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(CPSAR_DEVICE *HalDev, int Mode); -+ int (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*Init)(CPSAR_DEVICE *HalDev); -+ int (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(CPSAR_DEVICE *HalDev); -+ int (*Probe)(CPSAR_DEVICE *HalDev); -+ int (*Shutdown)(CPSAR_DEVICE *HalDev); -+ int (*Tick)(CPSAR_DEVICE *HalDev); -+ } CPSAR_FUNCTIONS; -+ -+/* -+ * This is the data structure for a generic HAL device. It contains all device -+ * specific data for a single instance of that device. This includes Rx/Tx -+ * buffer queues, device base address, reset bit, and other information. -+ */ -+typedef struct cpsar_device -+ { -+ bit32 dev_base; -+ bit32 offset; -+ bit32 TxTeardownPending[MAX_CHAN]; -+ bit32 RxTeardownPending[MAX_CHAN]; -+ bit32 ChIsOpen[MAX_CHAN]; -+ bit32 ResetBit; -+ bit32 debug; -+ OS_DEVICE *OsDev; -+ OS_FUNCTIONS *OsFunc; -+ /*void *OsOpen;*/ -+ bit32 UniNni; -+ bit32 Inst; -+ bit32u DeviceCPID[4]; -+ bit32u LBSourceLLID[4]; -+ bit32u OamRate[11]; -+ CHANNEL_INFO ChData[MAX_CHAN]; -+ int InitCount; -+ int OpenCount; -+ char *DeviceInfo; -+ bit32u ResetBase; -+ DEVICE_STATE State; -+ CPSAR_FUNCTIONS *HalFuncPtr; -+ int OamMode; /* +GSG 030407 */ -+ }CPSARDEVICE; -+ -+extern int cpsarInitModule(CPSAR_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ CPSAR_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/cpsar.h linux.dev/drivers/atm/sangam_atm/cpsar.h ---- linux.old/drivers/atm/sangam_atm/cpsar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpsar.h 2005-08-23 04:46:50.087845216 +0200 -@@ -0,0 +1,103 @@ -+/******************************************************************************* -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: cpsar.h -+ * -+ * DESCRIPTION: -+ * This file contains data structure definitions for the CPSAR HAL. -+ * -+ * HISTORY: -+ * 6Sep02 Greg 1.00 Original Version created. -+ * -+ *****************************************************************************/ -+#ifndef _INC_CPSAR -+#define _INC_CPSAR -+ -+#define NUM_RX_STATE_WORDS 7 -+#define NUM_TX_STATE_WORDS 9 -+#define MAX_CHAN 19 -+ -+ -+#ifndef _CPHAL_CPSAR -+typedef void CPSAR_DEVICE; -+#endif -+ -+/* -+ * HAL Default Parameter Values -+ */ -+#define CFG_UNI_NNI 0 -+ -+/** -+ * @ingroup shared_data -+ * -+ * List of defined keys for use with Control(). -+ */ -+typedef enum -+ { -+ /* SAR */ -+ enGET_FIRMWARE, /**< Used by the SAR to request a pointer to firmware */ -+ enGET_FIRMWARE_SIZE, /**< Used by the SAR to request the size of the firmware */ -+ enEND=9999 /* Last entry */ -+ }INFO_KEY; -+ -+/* -+ * The CPHAL_FUNCTIONS struct defines the CPHAL function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup)(CPSAR_DEVICE *HalDev, CHANNEL_INFO *HalCh); -+ int (*ChannelTeardown)(CPSAR_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(CPSAR_DEVICE *HalDev, int Mode); -+ int (*Control)(CPSAR_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*Init)(CPSAR_DEVICE *HalDev); -+ int (*ModeChange)(CPSAR_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(CPSAR_DEVICE *HalDev); -+ int (*Probe)(CPSAR_DEVICE *HalDev); -+ int (*Shutdown)(CPSAR_DEVICE *HalDev); -+ int (*Tick)(CPSAR_DEVICE *HalDev); -+ } CPSAR_FUNCTIONS; -+ -+/* -+ * This is the data structure for a generic HAL device. It contains all device -+ * specific data for a single instance of that device. This includes Rx/Tx -+ * buffer queues, device base address, reset bit, and other information. -+ */ -+typedef struct cpsar_device -+ { -+ bit32 dev_base; -+ bit32 offset; -+ bit32 TxTeardownPending[MAX_CHAN]; -+ bit32 RxTeardownPending[MAX_CHAN]; -+ bit32 ChIsOpen[MAX_CHAN]; -+ bit32 ResetBit; -+ bit32 debug; -+ OS_DEVICE *OsDev; -+ OS_FUNCTIONS *OsFunc; -+ /*void *OsOpen;*/ -+ bit32 UniNni; -+ bit32 Inst; -+ bit32u DeviceCPID[4]; -+ bit32u LBSourceLLID[4]; -+ bit32u OamRate[11]; -+ CHANNEL_INFO ChData[MAX_CHAN]; -+ int InitCount; -+ int OpenCount; -+ char *DeviceInfo; -+ bit32u ResetBase; -+ DEVICE_STATE State; -+ CPSAR_FUNCTIONS *HalFuncPtr; -+ int OamMode; /* +GSG 030407 */ -+ }CPSARDEVICE; -+ -+extern int cpsarInitModule(CPSAR_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ CPSAR_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/cp_sar_reg.h linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h ---- linux.old/drivers/atm/sangam_atm/cp_sar_reg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cp_sar_reg.h 2005-08-23 04:46:50.087845216 +0200 -@@ -0,0 +1,217 @@ -+/*************************************************************************** -+ TNETD73xx Software Support -+ Copyright(c) 2000, Texas Instruments Incorporated. All Rights Reserved. -+ -+ FILE: cp_sar_reg.h Register definitions for the SAR module -+ -+ DESCRIPTION: -+ This include file contains register definitions for the -+ SAR module. -+ -+ HISTORY: -+ 15 Jan 02 G. Guyotte Original version written -+ 03 Oct 02 G. Guyotte C++ style comments removed -+****************************************************************************/ -+#ifndef _INC_SAR_REG -+#define _INC_SAR_REG -+ -+/* Global Registers */ -+#define pSAR_ID_REG(base) ((volatile bit32u *)(base+0x0000)) -+#define SAR_ID_REG(base) (*pSAR_ID_REG(base)) -+#define pSAR_STATUS_SET_REG(base) ((volatile bit32u *)(base+0x0008)) -+#define SAR_STATUS_SET_REG(base) (*pSAR_STATUS_SET_REG(base)) -+#define pSAR_STATUS_CLR_REG(base) ((volatile bit32u *)(base+0x000C)) -+#define SAR_STATUS_CLR_REG(base) (*pSAR_STATUS_CLR_REG(base)) -+#define pSAR_HOST_INT_EN_SET_REG(base) ((volatile bit32u *)(base+0x0010)) -+#define SAR_HOST_INT_EN_SET_REG(base) (*pSAR_HOST_INT_EN_SET_REG(base)) -+#define pSAR_HOST_INT_EN_CLR_REG(base) ((volatile bit32u *)(base+0x0014)) -+#define SAR_HOST_INT_EN_CLR_REG(base) (*pSAR_HOST_INT_EN_CLR_REG(base)) -+#define pSAR_PDSP_INT_EN_SET_REG(base) ((volatile bit32u *)(base+0x0018)) -+#define SAR_PDSP_INT_EN_SET_REG(base) (*pSAR_PDSP_INT_EN_SET_REG(base)) -+#define pSAR_PDSP_INT_EN_CLR_REG(base) ((volatile bit32u *)(base+0x001C)) -+#define SAR_PDSP_INT_EN_CLR_REG(base) (*pSAR_PDSP_INT_EN_CLR_REG(base)) -+ -+/* PDSP OAM General Purpose Registers */ -+#define pSAR_PDSP_HOST_OAM_CONFIG_REG(base) ((volatile bit32u *)(base+0x0020)) -+#define SAR_PDSP_HOST_OAM_CONFIG_REG(base) (*pSAR_PDSP_HOST_OAM_CONFIG_REG(base)) -+#define pSAR_PDSP_OAM_CORR_REG(base) ((volatile bit32u *)(base+0x0024)) -+#define SAR_PDSP_OAM_CORR_REG(base) (*pSAR_PDSP_OAM_CORR_REG(base)) -+#define pSAR_PDSP_OAM_LB_RESULT_REG(base) ((volatile bit32u *)(base+0x0028)) -+#define SAR_PDSP_OAM_LB_RESULT_REG(base) (*pSAR_PDSP_OAM_LB_RESULT_REG(base)) -+#define pSAR_PDSP_OAM_F5_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x002c)) /* +GSG 030416 */ -+#define SAR_PDSP_OAM_F5_LB_COUNT_REG(base) (*pSAR_PDSP_OAM_F5_LB_COUNT_REG(base)) /* +GSG 030416 */ -+#define pSAR_PDSP_OAM_F4_LB_COUNT_REG(base) ((volatile bit32u *)(base+0x0030)) /* +GSG 030416 */ -+#define SAR_PDSP_OAM_F4_LB_COUNT_REG(base) (*pSAR_PDSP_OAM_F4_LB_COUNT_REG(base)) /* +GSG 030416 */ -+#define pSAR_PDSP_FWD_UNK_VC_REG(base) ((volatile bit32u *)(base+0x0034)) /* +GSG 030701 */ -+#define SAR_PDSP_FWD_UNK_VC_REG(base) (*pSAR_PDSP_FWD_UNK_VC_REG(base)) /* +GSG 030701 */ -+ -+ -+/* Rx Lookup Table Registers */ -+#define pRX_LUT_GLOBAL_CFG_REG(base) ((volatile bit32u *)(base+0x0080)) -+#define RX_LUT_GLOBAL_CFG_REG(base) (*pRX_LUT_GLOBAL_CFG_REG(base)) -+#define pRX_LUT_CH_SETUP_REQ_REG(base) ((volatile bit32u *)(base+0x0090)) -+#define RX_LUT_CH_SETUP_REQ_REG(base) (*pRX_LUT_CH_SETUP_REQ_REG(base)) -+#define pRX_LUT_CH_SETUP_REQ_VC_REG(base) ((volatile bit32u *)(base+0x0094)) -+#define RX_LUT_CH_SETUP_REQ_VC_REG(base) (*pRX_LUT_CH_SETUP_REQ_VC_REG(base)) -+#define pRX_LUT_CH_TEARDOWN_REQ_REG(base) ((volatile bit32u *)(base+0x009C)) -+#define RX_LUT_CH_TEARDOWN_REQ_REG(base) (*pRX_LUT_CH_TEARDOWN_REQ_REG(base)) -+ -+/* Tx Scheduler Registers */ -+#define pTX_CH_MAPPING_REG(base) ((volatile bit32u *)(base+0x0170)) -+#define TX_CH_MAPPING_REG(base) (*pTX_CH_MAPPING_REG(base)) -+ -+/* Tx CPPI DMA Controller Registers */ -+#define pTX_CPPI_CTL_REG(base) ((volatile bit32u *)(base+0x0700)) -+#define TX_CPPI_CTL_REG(base) (*pTX_CPPI_CTL_REG(base)) -+#define pTX_CPPI_TEARDOWN_REG(base) ((volatile bit32u *)(base+0x0704)) -+#define TX_CPPI_TEARDOWN_REG(base) (*pTX_CPPI_TEARDOWN_REG(base)) -+ -+/* EOI Interrupt Additions */ -+#define pSAR_EOI(base) ((volatile bit32u *)(base+0x0708)) -+#define SAR_EOI(base) (*pSAR_EOI(base)) -+#define pSAR_INTR_VECTOR(base) ((volatile bit32u *)(base+0x070c)) -+#define SAR_INTR_VECTOR(base) (*pSAR_INTR_VECTOR(base)) -+#define pSAR_TX_MASKED_STATUS(base) ((volatile bit32u *)(base+0x0710)) -+#define SAR_TX_MASKED_STATUS(base) (*pSAR_TX_MASKED_STATUS(base)) -+#define pSAR_TX_RAW_STATUS(base) ((volatile bit32u *)(base+0x0714)) -+#define SAR_TX_RAW_STATUS(base) (*pSAR_TX_RAW_STATUS(base)) -+#define pSAR_TX_MASK_SET(base) ((volatile bit32u *)(base+0x0718)) -+#define SAR_TX_MASK_SET(base) (*pSAR_TX_MASK_SET(base)) -+#define pSAR_TX_MASK_CLR(base) ((volatile bit32u *)(base+0x071c)) -+#define SAR_TX_MASK_CLR(base) (*pSAR_TX_MASK_CLR(base)) -+ -+/* Rx CPPI DMA Controller Registers */ -+#define pRX_CPPI_CTL_REG(base) ((volatile bit32u *)(base+0x0780)) -+#define RX_CPPI_CTL_REG(base) (*pRX_CPPI_CTL_REG(base)) -+#define pSAR_RX_MASKED_STATUS(base) ((volatile bit32u *)(base+0x0790)) -+#define SAR_RX_MASKED_STATUS(base) (*pSAR_RX_MASKED_STATUS(base)) -+#define pSAR_RX_RAW_STATUS(base) ((volatile bit32u *)(base+0x0794)) -+#define SAR_RX_RAW_STATUS(base) (*pSAR_RX_RAW_STATUS(base)) -+#define pSAR_RX_MASK_SET(base) ((volatile bit32u *)(base+0x0798)) -+#define SAR_RX_MASK_SET(base) (*pSAR_RX_MASK_SET(base)) -+#define pSAR_RX_MASK_CLR(base) ((volatile bit32u *)(base+0x079c)) -+#define SAR_RX_MASK_CLR(base) (*pSAR_RX_MASK_CLR(base)) -+ -+/* PDSP Control/Status Registers */ -+#define pPDSP_CTRL_REG(base) ((volatile bit32u *)(base+0x4000)) -+#define PDSP_CTRL_REG(base) (*pPDSP_CTRL_REG(base)) -+ -+/* PDSP Instruction RAM */ -+#define pPDSP_IRAM(base) ((volatile bit32u *)(base+0x4020)) -+#define PDSP_IRAM(base) (*pPDSP_IRAM(base)) -+ -+/* -+ * Channel 0 State/Scratchpad RAM Block -+ * -+ * The following registers (Tx DMA State, Rx DMA State, CPPI Completion PTR, -+ * and PDSP Data) have been given the correct address for channel 0. To -+ * reach the registers for channel X, add (X * 0x100) to the pointer address. -+ * -+ */ -+ -+#define PDSP_STATE_RAM_SIZE 1024 -+ -+/* Tx DMA State RAM */ -+#define pTX_DMA_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8000)) -+#define TX_DMA_STATE_WORD_0(base) (*pTX_DMA_STATE_WORD_0(base)) -+#define pTX_DMA_STATE_WORD_1(base) ((volatile bit32u *)(base+0x8004)) -+#define TX_DMA_STATE_WORD_1(base) (*pTX_DMA_STATE_WORD_1(base)) -+#define pTX_DMA_STATE_WORD_2(base) ((volatile bit32u *)(base+0x8008)) -+#define TX_DMA_STATE_WORD_2(base) (*pTX_DMA_STATE_WORD_2(base)) -+#define pTX_DMA_STATE_WORD_3(base) ((volatile bit32u *)(base+0x800C)) -+#define TX_DMA_STATE_WORD_3(base) (*pTX_DMA_STATE_WORD_3(base)) -+#define pTX_DMA_STATE_WORD_4(base) ((volatile bit32u *)(base+0x8010)) -+#define TX_DMA_STATE_WORD_4(base) (*pTX_DMA_STATE_WORD_4(base)) -+#define pTX_DMA_STATE_WORD_5(base) ((volatile bit32u *)(base+0x8014)) -+#define TX_DMA_STATE_WORD_5(base) (*pTX_DMA_STATE_WORD_5(base)) -+#define pTX_DMA_STATE_WORD_6(base) ((volatile bit32u *)(base+0x8018)) -+#define TX_DMA_STATE_WORD_6(base) (*pTX_DMA_STATE_WORD_6(base)) -+#define pTX_DMA_STATE_WORD_7(base) ((volatile bit32u *)(base+0x801C)) -+#define TX_DMA_STATE_WORD_7(base) (*pTX_DMA_STATE_WORD_7(base)) -+#define pTX_DMA_STATE_WORD_8(base) ((volatile bit32u *)(base+0x8020)) -+#define TX_DMA_STATE_WORD_8(base) (*pTX_DMA_STATE_WORD_8(base)) -+ -+/* Rx DMA State RAM */ -+#define pRX_DMA_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8024)) -+#define RX_DMA_STATE_WORD_0(base) (*pRX_DMA_STATE_WORD_0(base)) -+#define pRX_DMA_STATE_WORD_1(base) ((volatile bit32u *)(base+0x8028)) -+#define RX_DMA_STATE_WORD_1(base) (*pRX_DMA_STATE_WORD_1(base)) -+#define pRX_DMA_STATE_WORD_2(base) ((volatile bit32u *)(base+0x802C)) -+#define RX_DMA_STATE_WORD_2(base) (*pRX_DMA_STATE_WORD_2(base)) -+#define pRX_DMA_STATE_WORD_3(base) ((volatile bit32u *)(base+0x8030)) -+#define RX_DMA_STATE_WORD_3(base) (*pRX_DMA_STATE_WORD_3(base)) -+#define pRX_DMA_STATE_WORD_4(base) ((volatile bit32u *)(base+0x8034)) -+#define RX_DMA_STATE_WORD_4(base) (*pRX_DMA_STATE_WORD_4(base)) -+#define pRX_DMA_STATE_WORD_5(base) ((volatile bit32u *)(base+0x8038)) -+#define RX_DMA_STATE_WORD_5(base) (*pRX_DMA_STATE_WORD_5(base)) -+#define pRX_DMA_STATE_WORD_6(base) ((volatile bit32u *)(base+0x803C)) -+#define RX_DMA_STATE_WORD_6(base) (*pRX_DMA_STATE_WORD_6(base)) -+ -+/* Tx CPPI Completion Pointers */ -+#define pTXH_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8040)) -+#define TXH_CPPI_COMP_PTR(base) (*pTXH_CPPI_COMP_PTR(base)) -+#define pTXL_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8044)) -+#define TXL_CPPI_COMP_PTR(base) (*pTXL_CPPI_COMP_PTR(base)) -+ -+/* Rx CPPI Completion Pointer */ -+#define pRX_CPPI_COMP_PTR(base) ((volatile bit32u *)(base+0x8048)) -+#define RX_CPPI_COMP_PTR(base) (*pRX_CPPI_COMP_PTR(base)) -+ -+/* Tx PDSP Defines */ -+#define NUM_PDSP_AAL5_STATE_WORDS 24 -+#define NUM_PDSP_AAL2_STATE_WORDS 20 -+ -+/* PDSP State RAM Block 0 */ -+#define pPDSP_BLOCK_0(base) ((volatile bit32u *)(base+0x8050)) -+#define PDSP_BLOCK_0(base) (*pPDSP_BLOCK_0(base)) -+ -+/* AAL5 Tx PDSP State RAM */ -+#define pPDSP_AAL5_TX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8050)) -+#define PDSP_AAL5_TX_STATE_WORD_0(base) (*pPDSP_AAL5_TX_STATE_WORD_0(base)) -+ -+/* AAL5 Rx PDSP State RAM */ -+#define pPDSP_AAL5_RX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8070)) -+#define PDSP_AAL5_RX_STATE_WORD_0(base) (*pPDSP_AAL5_RX_STATE_WORD_0(base)) -+ -+/* AAL5 Tx VP PDSP State RAM */ -+#define pPDSP_AAL5_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x8090)) -+#define PDSP_AAL5_TX_VP_STATE_WORD_0(base) (*pPDSP_AAL5_TX_VP_STATE_WORD_0(base)) -+ -+/* AAL5 Rx VP PDSP State RAM */ -+#define pPDSP_AAL5_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80A0)) -+#define PDSP_AAL5_RX_VP_STATE_WORD_0(base) (*pPDSP_AAL5_RX_VP_STATE_WORD_0(base)) -+ -+/* AAL2 Tx PDSP State RAM */ -+#define pPDSP_AAL2_TX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80B0)) -+#define PDSP_AAL2_TX_STATE_WORD_0(base) (*pPDSP_AAL2_TX_STATE_WORD_0(base)) -+ -+/* AAL2 Rx PDSP State RAM */ -+#define pPDSP_AAL2_RX_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80D0)) -+#define PDSP_AAL2_RX_STATE_WORD_0(base) (*pPDSP_AAL2_RX_STATE_WORD_0(base)) -+ -+/* AAL2 Tx VP PDSP State RAM */ -+#define pPDSP_AAL2_TX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80E0)) -+#define PDSP_AAL2_TX_VP_STATE_WORD_0(base) (*pPDSP_AAL2_TX_VP_STATE_WORD_0(base)) -+ -+/* AAL2 Rx VP PDSP State RAM */ -+#define pPDSP_AAL2_RX_VP_STATE_WORD_0(base) ((volatile bit32u *)(base+0x80F0)) -+#define PDSP_AAL2_RX_VP_STATE_WORD_0(base) (*pPDSP_AAL2_RX_VP_STATE_WORD_0(base)) -+ -+/* PDSP OAM Configuration Block */ -+#define pOAM_CONFIG_BLOCK_WORD_0(base) ((volatile bit32u *)(base+0x83C0)) -+#define OAM_CONFIG_BLOCK_WORD_0(base) (*pOAM_CONFIG_BLOCK_WORD_0(base)) -+ -+/* PDSP OAM Padding Block */ -+#define pOAM_PADDING_BLOCK_WORD_0(base) ((volatile bit32u *)(base+0x84C0)) -+#define OAM_PADDING_BLOCK_WORD_0(base) (*pOAM_PADDING_BLOCK_WORD_0(base)) -+ -+#define NUM_OAM_RATES 11 -+ -+/* PDSP OAM Timer State RAM */ -+#define pOAM_TIMER_STATE_WORD_0(base) ((volatile bit32u *)(base+0x85B0)) -+#define OAM_TIMER_STATE_WORD_0(base) (*pOAM_TIMER_STATE_WORD_0(base)) -+ -+ -+/* END OF FILE */ -+ -+#endif _INC_SAR_REG -diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h ---- linux.old/drivers/atm/sangam_atm/cpswhal_cpaal5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpaal5.h 2005-08-23 04:46:50.088845064 +0200 -@@ -0,0 +1,629 @@ -+/************************************************************************ -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: cphal.h -+ * -+ * DESCRIPTION: -+ * User include file, contains data definitions shared between the CPHAL -+ * and the upper-layer software. -+ * -+ * HISTORY: -+ * Date Modifier Ver Notes -+ * 28Feb02 Greg 1.00 Original -+ * 06Mar02 Greg 1.01 Documentation enhanced -+ * 18Jul02 Greg 1.02 Many updates (OAM additions, general reorg) -+ * 22Nov02 Mick RC2 Additions from Denis' input on Control -+ * -+ * author Greg Guyotte -+ * version 1.02 -+ * date 18-Jul-2002 -+ *****************************************************************************/ -+#ifndef _INC_CPHAL_H -+#define _INC_CPHAL_H -+ -+#ifdef _CPHAL_CPMAC -+#include "ec_errors_cpmac.h" -+#endif -+ -+#ifdef _CPHAL_AAL5 -+#include "ec_errors_cpaal5.h" -+#endif -+ -+#ifdef _CPHAL_CPSAR -+#include "ec_errors_cpsar.h" -+#endif -+ -+#ifdef _CPHAL_AAL2 -+#include "ec_errors_cpaal2.h" -+#endif -+ -+#ifndef __ADAM2 -+typedef char bit8; -+typedef short bit16; -+typedef int bit32; -+ -+typedef unsigned char bit8u; -+typedef unsigned short bit16u; -+typedef unsigned int bit32u; -+ -+/* -+typedef char INT8; -+typedef short INT16; -+typedef int INT32; -+typedef unsigned char UINT8; -+typedef unsigned short UINT16; -+typedef unsigned int UINT32; -+*/ -+/*typedef unsigned int size_t;*/ -+#endif -+ -+#ifdef _CPHAL -+ -+#ifndef TRUE -+#define TRUE (1==1) -+#endif -+ -+#ifndef FALSE -+#define FALSE (1==2) -+#endif -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#endif -+ -+#define VirtToPhys(a) (((int)a)&~0xe0000000) -+#define VirtToVirtNoCache(a) ((void*)((VirtToPhys(a))|0xa0000000)) -+#define VirtToVirtCache(a) ((void*)((VirtToPhys(a))|0x80000000)) -+#define PhysToVirtNoCache(a) ((void*)(((int)a)|0xa0000000)) -+#define PhysToVirtCache(a) ((void*)(((int)a)|0x80000000)) -+/* -+#define DataCacheHitInvalidate(a) {__asm__(" cache 17, (%0)" : : "r" (a));} -+#define DataCacheHitWriteback(a) {__asm__(" cache 25, (%0)" : : "r" (a));} -+*/ -+ -+#define PARTIAL 1 /**< Used in @c Close() and @c ChannelTeardown() */ -+#define FULL 2 /**< Used in @c Close() and @c ChannelTeardown() */ -+ -+/* Channel Teardown Defines */ -+#define RX_TEARDOWN 2 -+#define TX_TEARDOWN 1 -+#define BLOCKING_TEARDOWN 8 -+#define FULL_TEARDOWN 4 -+#define PARTIAL_TEARDOWN 0 -+ -+#define MAX_DIR 2 -+#define DIRECTION_TX 0 -+#define DIRECTION_RX 1 -+#define TX_CH 0 -+#define RX_CH 1 -+#define HAL_ERROR_DEVICE_NOT_FOUND 1 -+#define HAL_ERROR_FAILED_MALLOC 2 -+#define HAL_ERROR_OSFUNC_SIZE 3 -+#define HAL_DEFAULT 0xFFFFFFFF -+#define VALID(val) (val!=HAL_DEFAULT) -+ -+/* -+ERROR REPORTING -+ -+HAL Module Codes. Each HAL module reporting an error code -+should OR the error code with the respective Module error code -+from the list below. -+*/ -+#define EC_AAL5 EC_HAL|EC_DEV_AAL5 -+#define EC_AAL2 EC_HAL|EC_DEV_AAL2 -+#define EC_CPSAR EC_HAL|EC_DEV_CPSAR -+#define EC_CPMAC EC_HAL|EC_DEV_CPMAC -+#define EC_VDMA EC_HAL|EC_DEV_VDMA -+#define EC_VLYNQ EC_HAL|EC_DEV_VLYNQ -+#define EC_CPPI EC_HAL|EC_DEV_CPPI -+ -+/* -+HAL Function Codes. Each HAL module reporting an error code -+should OR the error code with one of the function codes from -+the list below. -+*/ -+#define EC_FUNC_HAL_INIT EC_FUNC(1) -+#define EC_FUNC_CHSETUP EC_FUNC(2) -+#define EC_FUNC_CHTEARDOWN EC_FUNC(3) -+#define EC_FUNC_RXRETURN EC_FUNC(4) -+#define EC_FUNC_SEND EC_FUNC(5) -+#define EC_FUNC_RXINT EC_FUNC(6) -+#define EC_FUNC_TXINT EC_FUNC(7) -+#define EC_FUNC_AAL2_VDMA EC_FUNC(8) -+#define EC_FUNC_OPTIONS EC_FUNC(9) -+#define EC_FUNC_PROBE EC_FUNC(10) -+#define EC_FUNC_OPEN EC_FUNC(11) -+#define EC_FUNC_CONTROL EC_FUNC(12) -+#define EC_FUNC_DEVICE_INT EC_FUNC(13) -+#define EC_FUNC_STATUS EC_FUNC(14) -+#define EC_FUNC_TICK EC_FUNC(15) -+#define EC_FUNC_CLOSE EC_FUNC(16) -+#define EC_FUNC_SHUTDOWN EC_FUNC(17) -+#define EC_FUNC_DEVICE_INT_ALT EC_FUNC(18) /* +GSG 030306 */ -+ -+/* -+HAL Error Codes. The list below defines every type of error -+used in all HAL modules. DO NOT CHANGE THESE VALUES! Add new -+values in integer order to the bottom of the list. -+*/ -+#define EC_VAL_PDSP_LOAD_FAIL EC_ERR(0x01)|EC_CRITICAL -+#define EC_VAL_FIRMWARE_TOO_LARGE EC_ERR(0x02)|EC_CRITICAL -+#define EC_VAL_DEVICE_NOT_FOUND EC_ERR(0x03)|EC_CRITICAL -+#define EC_VAL_BASE_ADDR_NOT_FOUND EC_ERR(0x04)|EC_CRITICAL -+#define EC_VAL_RESET_BIT_NOT_FOUND EC_ERR(0x05)|EC_CRITICAL -+#define EC_VAL_CH_INFO_NOT_FOUND EC_ERR(0x06) -+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED EC_ERR(0x07)|EC_CRITICAL -+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED EC_ERR(0x08)|EC_CRITICAL -+#define EC_VAL_MALLOC_DEV_FAILED EC_ERR(0x09) -+#define EC_VAL_OS_VERSION_NOT_SUPPORTED EC_ERR(0x0A)|EC_CRITICAL -+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED EC_ERR(0x0B)|EC_CRITICAL -+#define EC_VAL_NULL_CPSAR_DEV EC_ERR(0x0C)|EC_CRITICAL -+ -+#define EC_VAL_LUT_NOT_READY EC_ERR(0x0D) -+#define EC_VAL_INVALID_CH EC_ERR(0x0E) -+#define EC_VAL_NULL_CH_STRUCT EC_ERR(0x0F) -+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND EC_ERR(0x10) -+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND EC_ERR(0x11) -+#define EC_VAL_RX_CH_ALREADY_TORNDOWN EC_ERR(0x12) -+#define EC_VAL_TX_CH_ALREADY_TORNDOWN EC_ERR(0x13) -+#define EC_VAL_TX_TEARDOWN_TIMEOUT EC_ERR(0x14) -+#define EC_VAL_RX_TEARDOWN_TIMEOUT EC_ERR(0x15) -+#define EC_VAL_CH_ALREADY_TORNDOWN EC_ERR(0x16) -+#define EC_VAL_VC_SETUP_NOT_READY EC_ERR(0x17) -+#define EC_VAL_VC_TEARDOWN_NOT_READY EC_ERR(0x18) -+#define EC_VAL_INVALID_VC EC_ERR(0x19) -+#define EC_VAL_INVALID_LC EC_ERR(0x20) -+#define EC_VAL_INVALID_VDMA_CH EC_ERR(0x21) -+#define EC_VAL_INVALID_CID EC_ERR(0x22) -+#define EC_VAL_INVALID_UUI EC_ERR(0x23) -+#define EC_VAL_INVALID_UUI_DISCARD EC_ERR(0x24) -+#define EC_VAL_CH_ALREADY_OPEN EC_ERR(0x25) -+ -+#define EC_VAL_RCB_MALLOC_FAILED EC_ERR(0x26) -+#define EC_VAL_RX_BUFFER_MALLOC_FAILED EC_ERR(0x27) -+#define EC_VAL_OUT_OF_TCBS EC_ERR(0x28) -+#define EC_VAL_NO_TCBS EC_ERR(0x29) -+#define EC_VAL_NULL_RCB EC_ERR(0x30)|EC_CRITICAL -+#define EC_VAL_SOP_ERROR EC_ERR(0x31)|EC_CRITICAL -+#define EC_VAL_EOP_ERROR EC_ERR(0x32)|EC_CRITICAL -+#define EC_VAL_NULL_TCB EC_ERR(0x33)|EC_CRITICAL -+#define EC_VAL_CORRUPT_RCB_CHAIN EC_ERR(0x34)|EC_CRITICAL -+#define EC_VAL_TCB_MALLOC_FAILED EC_ERR(0x35) -+ -+#define EC_VAL_DISABLE_POLLING_FAILED EC_ERR(0x36) -+#define EC_VAL_KEY_NOT_FOUND EC_ERR(0x37) -+#define EC_VAL_MALLOC_FAILED EC_ERR(0x38) -+#define EC_VAL_RESET_BASE_NOT_FOUND EC_ERR(0x39)|EC_CRITICAL -+#define EC_VAL_INVALID_STATE EC_ERR(0x40) -+#define EC_VAL_NO_TXH_WORK_TO_DO EC_ERR(0x41) -+#define EC_VAL_NO_TXL_WORK_TO_DO EC_ERR(0x42) -+#define EC_VAL_NO_RX_WORK_TO_DO EC_ERR(0x43) -+#define EC_VAL_NOT_LINKED EC_ERR(0x44) -+#define EC_VAL_INTERRUPT_NOT_FOUND EC_ERR(0x45) -+#define EC_VAL_OFFSET_NOT_FOUND EC_ERR(0x46) -+#define EC_VAL_MODULE_ALREADY_CLOSED EC_ERR(0x47) -+#define EC_VAL_MODULE_ALREADY_SHUTDOWN EC_ERR(0x48) -+#define EC_VAL_ACTION_NOT_FOUND EC_ERR(0x49) -+#define EC_VAL_RX_CH_ALREADY_SETUP EC_ERR(0x50) -+#define EC_VAL_TX_CH_ALREADY_SETUP EC_ERR(0x51) -+#define EC_VAL_RX_CH_ALREADY_OPEN EC_ERR(0x52) -+#define EC_VAL_TX_CH_ALREADY_OPEN EC_ERR(0x53) -+#define EC_VAL_CH_ALREADY_SETUP EC_ERR(0x54) -+#define EC_VAL_RCB_NEEDS_BUFFER EC_ERR(0x55) /* +GSG 030410 */ -+#define EC_VAL_RCB_DROPPED EC_ERR(0x56) /* +GSG 030410 */ -+#define EC_VAL_INVALID_VALUE EC_ERR(0x57) -+ -+/** -+@defgroup shared_data Shared Data Structures -+ -+The data structures documented here are shared by all modules. -+*/ -+ -+/** -+ * @ingroup shared_data -+ * This is the fragment list structure. Each fragment list entry contains a -+ * length and a data buffer. -+ */ -+typedef struct -+ { -+ bit32u len; /**< Length of the fragment in bytes (lower 16 bits are valid). For SOP, upper 16 bits is the buffer offset. */ -+ void *data; /**< Pointer to fragment data. */ -+ void *OsInfo; /**< Pointer to OS defined data. */ -+ }FRAGLIST; -+ -+#if defined (_CPHAL_CPMAC) -+#define CB_PASSCRC_BIT (1<<26) -+ -+/* CPMAC CPHAL STATUS */ -+#define CPMAC_STATUS_LINK (1 << 0) -+#define CPMAC_STATUS_LINK_DUPLEX (1 << 1) /* 0 - HD, 1 - FD */ -+#define CPMAC_STATUS_LINK_SPEED (1 << 2) /* 0 - 10, 1 - 100 */ -+ -+/* ADAPTER CHECK Codes */ -+ -+#define CPMAC_STATUS_ADAPTER_CHECK (1 << 7) -+#define CPMAC_STATUS_HOST_ERR_DIRECTION (1 << 8) -+#define CPMAC_STATUS_HOST_ERR_CODE (0xF << 9) -+#define CPMAC_STATUS_HOST_ERR_CH (0x7 << 13) -+ -+#define _CPMDIO_DISABLE (1 << 0) -+#define _CPMDIO_HD (1 << 1) -+#define _CPMDIO_FD (1 << 2) -+#define _CPMDIO_10 (1 << 3) -+#define _CPMDIO_100 (1 << 4) -+#define _CPMDIO_NEG_OFF (1 << 5) -+#define _CPMDIO_LOOPBK (1 << 16) -+#define _CPMDIO_NOPHY (1 << 20) -+#endif -+ -+/** -+ * @ingroup shared_data -+ * Channel specific configuration information. This structure should be -+ * populated by upper-layer software prior to calling @c ChannelSetup(). Any -+ * configuration item that can be changed on a per channel basis should -+ * be represented here. Each module may define this structure with additional -+ * module-specific members. -+ */ -+typedef struct -+ { -+ int Channel; /**< Channel number. */ -+ int Direction; /**< DIRECTION_RX(1) or DIRECTION_TX(0). */ -+ OS_SETUP *OsSetup; /**< OS defined information associated with this channel. */ -+ -+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC) -+ int RxBufSize; /**< Size (in bytes) for each Rx buffer.*/ -+ int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */ -+ int RxNumBuffers; /**< The number of Rx buffer descriptors to allocate for Ch. */ -+ int RxServiceMax; /**< Maximum number of packets to service at one time. */ -+ -+ int TxNumBuffers; /**< The number of Tx buffer descriptors to allocate for Ch. */ -+ int TxNumQueues; /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */ -+ int TxServiceMax; /**< Maximum number of packets to service at one time. */ -+#endif -+ -+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+ int CpcsUU; /**< The 2-byte CPCS UU and CPI information. */ -+ int Gfc; /**< Generic Flow Control. */ -+ int Clp; /**< Cell Loss Priority. */ -+ int Pti; /**< Payload Type Indication. */ -+#endif -+ -+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+ int DaMask; /**< Specifies whether credit issuance is paused when Tx data not available. */ -+ int Priority; /**< Priority bin this channel will be scheduled within. */ -+ int PktType; /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */ -+ int Vci; /**< Virtual Channel Identifier. */ -+ int Vpi; /**< Virtual Path Identifier. */ -+ int FwdUnkVc; /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */ -+ -+ /* Tx VC State */ -+ int TxVc_CellRate; /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */ -+ int TxVc_QosType; /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */ -+ int TxVc_Mbs; /**< Min Burst Size in cells.*/ -+ int TxVc_Pcr; /**< Peak Cell Rate for VBR in clock ticks between transmissions. */ -+ -+ bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */ -+ int TxVc_OamTc; /**< TC Path to transmit OAM cells for TX connection (0,1). */ -+ int TxVc_VpOffset; /**< Offset to the OAM VP state table. */ -+ /* Rx VC State */ -+ int RxVc_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */ -+ int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */ -+ bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */ -+ int RxVc_OamTc; /**< TC Path to transmit OAM cells for RX connection (0,1). */ -+ int RxVc_VpOffset; /**< Offset to the OAM VP state table. */ -+ /* Tx VP State */ -+ int TxVp_OamTc; /**< TC Path to transmit OAM cells for TX VP connection (0,1). */ -+ bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */ -+ /* Rx VP State */ -+ int RxVp_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */ -+ int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */ -+ bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */ -+ int RxVp_OamTc; /**< TC Path to transmit OAM cells for RX VP connection (0,1). */ -+ int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */ -+#endif -+ -+ -+#ifdef _CPHAL_VDMAVT -+ bit32u RemFifoAddr; /* Mirror mode only. */ -+ bit32u FifoAddr; -+ bit32 PollInt; -+ bit32 FifoSize; -+ int Ready; -+#endif -+ -+ }CHANNEL_INFO; -+ -+/* -+ * This structure contains each statistic value gathered by the CPHAL. -+ * Applications may access statistics data by using the @c StatsGet() routine. -+ */ -+/* STATS */ -+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+typedef struct -+ { -+ bit32u CrcErrors[16]; -+ bit32u LenErrors[16]; -+ bit32u DmaLenErrors[16]; -+ bit32u AbortErrors[16]; -+ bit32u StarvErrors[16]; -+ bit32u TxMisQCnt[16][2]; -+ bit32u RxMisQCnt[16]; -+ bit32u RxEOQCnt[16]; -+ bit32u TxEOQCnt[16][2]; -+ bit32u RxPacketsServiced[16]; -+ bit32u TxPacketsServiced[16][2]; -+ bit32u RxMaxServiced; -+ bit32u TxMaxServiced[16][2]; -+ bit32u RxTotal; -+ bit32u TxTotal; -+ } STAT_INFO; -+#endif -+ -+/* -+ * VDMA Channel specific configuration information -+ */ -+#ifdef _CPHAL_AAL2 -+typedef struct -+ { -+ int Ch; /**< Channel Number */ -+ int RemoteEndian; /**< Endianness of remote VDMA-VT device */ -+ int CpsSwap; /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device. When 1, in MS byte. */ -+ }VdmaChInfo; -+#endif -+ -+#ifndef _CPHAL -+ typedef void HAL_DEVICE; -+ typedef void HAL_PRIVATE; -+ typedef void HAL_RCB; -+ typedef void HAL_RECEIVEINFO; -+#endif -+ -+/** -+ * @ingroup shared_data -+ * The HAL_FUNCTIONS struct defines the function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to xxxInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup) (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup); -+ int (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode); -+ int (*Close) (HAL_DEVICE *HalDev, int Mode); -+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*Init) (HAL_DEVICE *HalDev); -+ int (*Open) (HAL_DEVICE *HalDev); -+ int (*PacketProcessEnd) (HAL_DEVICE *HalDev); -+ int (*Probe) (HAL_DEVICE *HalDev); -+ int (*RxReturn) (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag); -+ int (*Send) (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode); -+ int (*Shutdown) (HAL_DEVICE *HalDev); -+ int (*Tick) (HAL_DEVICE *HalDev); -+ -+#ifdef _CPHAL_AAL5 -+ int (*Kick) (HAL_DEVICE *HalDev, int Queue); -+ void (*OamFuncConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig); -+ void (*OamLoopbackConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ STAT_INFO* (*StatsGetOld)(HAL_DEVICE *HalDev); -+#endif -+ } HAL_FUNCTIONS; -+ -+/** -+ * @ingroup shared_data -+ * The OS_FUNCTIONS struct defines the function pointers for all upper layer -+ * functions accessible to the CPHAL. The upper layer software is responsible -+ * for providing the correct OS-specific implementations for the following -+ * functions. It is populated by calling InitModule() (done by the CPHAL in -+ * xxxInitModule(). -+ */ -+typedef struct -+ { -+ int (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value); -+ void (*CriticalOn)(void); -+ void (*CriticalOff)(void); -+ void (*DataCacheHitInvalidate)(void *MemPtr, int Size); -+ void (*DataCacheHitWriteback)(void *MemPtr, int Size); -+ int (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo); -+ int (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value); -+ int (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value); -+ void (*Free)(void *MemPtr); -+ void (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr); -+ void (*FreeDev)(void *MemPtr); -+ void (*FreeDmaXfer)(void *MemPtr); -+ void (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit); -+ void (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit); -+ void* (*Malloc)(bit32u size); -+ void* (*MallocDev)(bit32u Size); -+ void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange); -+ void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange, -+ OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo, -+ OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev); -+ void* (*Memset)(void *Dest, int C, bit32u N); -+ int (*Printf)(const char *Format, ...); -+ int (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount, -+ bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode); -+ int (*SendComplete)(OS_SENDINFO *OsSendInfo); -+ int (*Sprintf)(char *S, const char *Format, ...); -+ int (*Strcmpi)(const char *Str1, const char *Str2); -+ unsigned int (*Strlen)(const char *S); -+ char* (*Strstr)(const char *S1, const char *S2); -+ unsigned long (*Strtoul)(const char *Str, char **Endptr, int Base); -+ void (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction); -+ } OS_FUNCTIONS; -+ -+/************** MODULE SPECIFIC STUFF BELOW **************/ -+ -+#ifdef _CPHAL_CPMAC -+ -+/* -+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst); -+*/ -+ -+int halCpmacInitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_AAL5 -+/* -+ * @ingroup shared_data -+ * The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+/* -+typedef struct -+ { -+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(HAL_DEVICE *HalDev, int Mode); -+ int (*Init)(HAL_DEVICE *HalDev); -+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(HAL_DEVICE *HalDev); -+ int (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value); -+ int (*Probe)(HAL_DEVICE *HalDev); -+ int (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag); -+ int (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount, -+ int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue, -+ bit32u Mode); -+ int (*StatsClear)(HAL_DEVICE *HalDev); -+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev); -+ int (*Status)(HAL_DEVICE *HalDev); -+ void (*Tick)(HAL_DEVICE *HalDev); -+ int (*Kick)(HAL_DEVICE *HalDev, int Queue); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ } AAL5_FUNCTIONS; -+*/ -+ -+int cpaal5InitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_AAL2 -+/** -+ * @ingroup shared_data -+ * The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(HAL_DEVICE *HalDev, int Mode); -+ int (*Init)(HAL_DEVICE *HalDev); -+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(HAL_DEVICE *HalDev); -+ int (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value); -+ int (*Probe)(HAL_DEVICE *HalDev); -+ -+ int (*StatsClear)(HAL_DEVICE *HalDev); -+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev); -+ int (*Status)(HAL_DEVICE *HalDev); -+ void (*Tick)(HAL_DEVICE *HalDev); -+ int (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI, -+ int VdmaCh, int UUIDiscard); -+ int (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID, -+ int LC); -+ int (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh); -+ int (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr, -+ VdmaChInfo *VdmaCh); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ int (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode, -+ int RxMultiMode, int TxMultiMode, int SchedMode, -+ int TcCh); -+ void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch); -+ int (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch); -+ } AAL2_FUNCTIONS; -+ -+int cpaal2InitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ AAL2_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_VDMAVT -+/** -+ * @ingroup shared_data -+ * The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to InitModule(). -+ * -+ * Note that this list is still under definition. -+ */ -+typedef struct -+ { -+ bit32 (*Init)( HAL_DEVICE *VdmaVtDev); -+ /* bit32 (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem, -+ bit32u Addr, bit32u Size, bit32u PollInt); -+ bit32 (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem, -+ bit32u Addr, bit32u Size, bit32u PollInt); */ -+ bit32 (*Tx)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Rx)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr, -+ bit32u RemDevID); -+ bit32 (*ClearRxInt)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*ClearTxInt)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Open)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Close)(HAL_DEVICE *VdmaVtDev); -+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode); -+ int (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount, -+ int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode); -+ } VDMA_FUNCTIONS; -+ -+int VdmaInitModule(HAL_DEVICE **VdmaVt, -+ OS_DEVICE *OsDev, -+ VDMA_FUNCTIONS **VdmaVtFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+/* -+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, -+ int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u), -+ int *Size, int Inst); -+*/ -+ -+ -+#ifdef _CPHAL_AAL5 -+extern const char hcSarFrequency[]; -+#endif -+ -+#ifdef _CPHAL_CPMAC -+/* following will be common, once 'utl' added */ -+extern const char hcClear[]; -+extern const char hcGet[]; -+extern const char hcSet[]; -+extern const char hcTick[]; -+ -+extern const char hcCpuFrequency[]; -+extern const char hcCpmacFrequency[]; -+extern const char hcMdioBusFrequency[]; -+extern const char hcMdioClockFrequency[]; -+extern const char hcCpmacBase[]; -+extern const char hcPhyNum[]; -+extern const char hcSize[]; -+extern const char hcCpmacSize[]; -+extern const char hcPhyAccess[]; -+#endif -+ -+#endif /* end of _INC_ */ -diff -urN linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h ---- linux.old/drivers/atm/sangam_atm/cpswhal_cpsar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/cpswhal_cpsar.h 2005-08-23 04:46:50.089844912 +0200 -@@ -0,0 +1,629 @@ -+/************************************************************************ -+ * TNETDxxxx Software Support -+ * Copyright (c) 2002 Texas Instruments Incorporated. All Rights Reserved. -+ * -+ * FILE: cphal.h -+ * -+ * DESCRIPTION: -+ * User include file, contains data definitions shared between the CPHAL -+ * and the upper-layer software. -+ * -+ * HISTORY: -+ * Date Modifier Ver Notes -+ * 28Feb02 Greg 1.00 Original -+ * 06Mar02 Greg 1.01 Documentation enhanced -+ * 18Jul02 Greg 1.02 Many updates (OAM additions, general reorg) -+ * 22Nov02 Mick RC2 Additions from Denis' input on Control -+ * -+ * author Greg Guyotte -+ * version 1.02 -+ * date 18-Jul-2002 -+ *****************************************************************************/ -+#ifndef _INC_CPHAL_H -+#define _INC_CPHAL_H -+ -+#ifdef _CPHAL_CPMAC -+#include "ec_errors_cpmac.h" -+#endif -+ -+#ifdef _CPHAL_AAL5 -+#include "ec_errors_cpaal5.h" -+#endif -+ -+#ifdef _CPHAL_CPSAR -+#include "ec_errors_cpsar.h" -+#endif -+ -+#ifdef _CPHAL_AAL2 -+#include "ec_errors_cpaal2.h" -+#endif -+ -+#ifndef __ADAM2 -+typedef char bit8; -+typedef short bit16; -+typedef int bit32; -+ -+typedef unsigned char bit8u; -+typedef unsigned short bit16u; -+typedef unsigned int bit32u; -+ -+/* -+typedef char INT8; -+typedef short INT16; -+typedef int INT32; -+typedef unsigned char UINT8; -+typedef unsigned short UINT16; -+typedef unsigned int UINT32; -+*/ -+/*typedef unsigned int size_t;*/ -+#endif -+ -+#ifdef _CPHAL -+ -+#ifndef TRUE -+#define TRUE (1==1) -+#endif -+ -+#ifndef FALSE -+#define FALSE (1==2) -+#endif -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#endif -+ -+#define VirtToPhys(a) (((int)a)&~0xe0000000) -+#define VirtToVirtNoCache(a) ((void*)((VirtToPhys(a))|0xa0000000)) -+#define VirtToVirtCache(a) ((void*)((VirtToPhys(a))|0x80000000)) -+#define PhysToVirtNoCache(a) ((void*)(((int)a)|0xa0000000)) -+#define PhysToVirtCache(a) ((void*)(((int)a)|0x80000000)) -+/* -+#define DataCacheHitInvalidate(a) {__asm__(" cache 17, (%0)" : : "r" (a));} -+#define DataCacheHitWriteback(a) {__asm__(" cache 25, (%0)" : : "r" (a));} -+*/ -+ -+#define PARTIAL 1 /**< Used in @c Close() and @c ChannelTeardown() */ -+#define FULL 2 /**< Used in @c Close() and @c ChannelTeardown() */ -+ -+/* Channel Teardown Defines */ -+#define RX_TEARDOWN 2 -+#define TX_TEARDOWN 1 -+#define BLOCKING_TEARDOWN 8 -+#define FULL_TEARDOWN 4 -+#define PARTIAL_TEARDOWN 0 -+ -+#define MAX_DIR 2 -+#define DIRECTION_TX 0 -+#define DIRECTION_RX 1 -+#define TX_CH 0 -+#define RX_CH 1 -+#define HAL_ERROR_DEVICE_NOT_FOUND 1 -+#define HAL_ERROR_FAILED_MALLOC 2 -+#define HAL_ERROR_OSFUNC_SIZE 3 -+#define HAL_DEFAULT 0xFFFFFFFF -+#define VALID(val) (val!=HAL_DEFAULT) -+ -+/* -+ERROR REPORTING -+ -+HAL Module Codes. Each HAL module reporting an error code -+should OR the error code with the respective Module error code -+from the list below. -+*/ -+#define EC_AAL5 EC_HAL|EC_DEV_AAL5 -+#define EC_AAL2 EC_HAL|EC_DEV_AAL2 -+#define EC_CPSAR EC_HAL|EC_DEV_CPSAR -+#define EC_CPMAC EC_HAL|EC_DEV_CPMAC -+#define EC_VDMA EC_HAL|EC_DEV_VDMA -+#define EC_VLYNQ EC_HAL|EC_DEV_VLYNQ -+#define EC_CPPI EC_HAL|EC_DEV_CPPI -+ -+/* -+HAL Function Codes. Each HAL module reporting an error code -+should OR the error code with one of the function codes from -+the list below. -+*/ -+#define EC_FUNC_HAL_INIT EC_FUNC(1) -+#define EC_FUNC_CHSETUP EC_FUNC(2) -+#define EC_FUNC_CHTEARDOWN EC_FUNC(3) -+#define EC_FUNC_RXRETURN EC_FUNC(4) -+#define EC_FUNC_SEND EC_FUNC(5) -+#define EC_FUNC_RXINT EC_FUNC(6) -+#define EC_FUNC_TXINT EC_FUNC(7) -+#define EC_FUNC_AAL2_VDMA EC_FUNC(8) -+#define EC_FUNC_OPTIONS EC_FUNC(9) -+#define EC_FUNC_PROBE EC_FUNC(10) -+#define EC_FUNC_OPEN EC_FUNC(11) -+#define EC_FUNC_CONTROL EC_FUNC(12) -+#define EC_FUNC_DEVICE_INT EC_FUNC(13) -+#define EC_FUNC_STATUS EC_FUNC(14) -+#define EC_FUNC_TICK EC_FUNC(15) -+#define EC_FUNC_CLOSE EC_FUNC(16) -+#define EC_FUNC_SHUTDOWN EC_FUNC(17) -+#define EC_FUNC_DEVICE_INT_ALT EC_FUNC(18) /* +GSG 030306 */ -+ -+/* -+HAL Error Codes. The list below defines every type of error -+used in all HAL modules. DO NOT CHANGE THESE VALUES! Add new -+values in integer order to the bottom of the list. -+*/ -+#define EC_VAL_PDSP_LOAD_FAIL EC_ERR(0x01)|EC_CRITICAL -+#define EC_VAL_FIRMWARE_TOO_LARGE EC_ERR(0x02)|EC_CRITICAL -+#define EC_VAL_DEVICE_NOT_FOUND EC_ERR(0x03)|EC_CRITICAL -+#define EC_VAL_BASE_ADDR_NOT_FOUND EC_ERR(0x04)|EC_CRITICAL -+#define EC_VAL_RESET_BIT_NOT_FOUND EC_ERR(0x05)|EC_CRITICAL -+#define EC_VAL_CH_INFO_NOT_FOUND EC_ERR(0x06) -+#define EC_VAL_RX_STATE_RAM_NOT_CLEARED EC_ERR(0x07)|EC_CRITICAL -+#define EC_VAL_TX_STATE_RAM_NOT_CLEARED EC_ERR(0x08)|EC_CRITICAL -+#define EC_VAL_MALLOC_DEV_FAILED EC_ERR(0x09) -+#define EC_VAL_OS_VERSION_NOT_SUPPORTED EC_ERR(0x0A)|EC_CRITICAL -+#define EC_VAL_CPSAR_VERSION_NOT_SUPPORTED EC_ERR(0x0B)|EC_CRITICAL -+#define EC_VAL_NULL_CPSAR_DEV EC_ERR(0x0C)|EC_CRITICAL -+ -+#define EC_VAL_LUT_NOT_READY EC_ERR(0x0D) -+#define EC_VAL_INVALID_CH EC_ERR(0x0E) -+#define EC_VAL_NULL_CH_STRUCT EC_ERR(0x0F) -+#define EC_VAL_RX_TEARDOWN_ALREADY_PEND EC_ERR(0x10) -+#define EC_VAL_TX_TEARDOWN_ALREADY_PEND EC_ERR(0x11) -+#define EC_VAL_RX_CH_ALREADY_TORNDOWN EC_ERR(0x12) -+#define EC_VAL_TX_CH_ALREADY_TORNDOWN EC_ERR(0x13) -+#define EC_VAL_TX_TEARDOWN_TIMEOUT EC_ERR(0x14) -+#define EC_VAL_RX_TEARDOWN_TIMEOUT EC_ERR(0x15) -+#define EC_VAL_CH_ALREADY_TORNDOWN EC_ERR(0x16) -+#define EC_VAL_VC_SETUP_NOT_READY EC_ERR(0x17) -+#define EC_VAL_VC_TEARDOWN_NOT_READY EC_ERR(0x18) -+#define EC_VAL_INVALID_VC EC_ERR(0x19) -+#define EC_VAL_INVALID_LC EC_ERR(0x20) -+#define EC_VAL_INVALID_VDMA_CH EC_ERR(0x21) -+#define EC_VAL_INVALID_CID EC_ERR(0x22) -+#define EC_VAL_INVALID_UUI EC_ERR(0x23) -+#define EC_VAL_INVALID_UUI_DISCARD EC_ERR(0x24) -+#define EC_VAL_CH_ALREADY_OPEN EC_ERR(0x25) -+ -+#define EC_VAL_RCB_MALLOC_FAILED EC_ERR(0x26) -+#define EC_VAL_RX_BUFFER_MALLOC_FAILED EC_ERR(0x27) -+#define EC_VAL_OUT_OF_TCBS EC_ERR(0x28) -+#define EC_VAL_NO_TCBS EC_ERR(0x29) -+#define EC_VAL_NULL_RCB EC_ERR(0x30)|EC_CRITICAL -+#define EC_VAL_SOP_ERROR EC_ERR(0x31)|EC_CRITICAL -+#define EC_VAL_EOP_ERROR EC_ERR(0x32)|EC_CRITICAL -+#define EC_VAL_NULL_TCB EC_ERR(0x33)|EC_CRITICAL -+#define EC_VAL_CORRUPT_RCB_CHAIN EC_ERR(0x34)|EC_CRITICAL -+#define EC_VAL_TCB_MALLOC_FAILED EC_ERR(0x35) -+ -+#define EC_VAL_DISABLE_POLLING_FAILED EC_ERR(0x36) -+#define EC_VAL_KEY_NOT_FOUND EC_ERR(0x37) -+#define EC_VAL_MALLOC_FAILED EC_ERR(0x38) -+#define EC_VAL_RESET_BASE_NOT_FOUND EC_ERR(0x39)|EC_CRITICAL -+#define EC_VAL_INVALID_STATE EC_ERR(0x40) -+#define EC_VAL_NO_TXH_WORK_TO_DO EC_ERR(0x41) -+#define EC_VAL_NO_TXL_WORK_TO_DO EC_ERR(0x42) -+#define EC_VAL_NO_RX_WORK_TO_DO EC_ERR(0x43) -+#define EC_VAL_NOT_LINKED EC_ERR(0x44) -+#define EC_VAL_INTERRUPT_NOT_FOUND EC_ERR(0x45) -+#define EC_VAL_OFFSET_NOT_FOUND EC_ERR(0x46) -+#define EC_VAL_MODULE_ALREADY_CLOSED EC_ERR(0x47) -+#define EC_VAL_MODULE_ALREADY_SHUTDOWN EC_ERR(0x48) -+#define EC_VAL_ACTION_NOT_FOUND EC_ERR(0x49) -+#define EC_VAL_RX_CH_ALREADY_SETUP EC_ERR(0x50) -+#define EC_VAL_TX_CH_ALREADY_SETUP EC_ERR(0x51) -+#define EC_VAL_RX_CH_ALREADY_OPEN EC_ERR(0x52) -+#define EC_VAL_TX_CH_ALREADY_OPEN EC_ERR(0x53) -+#define EC_VAL_CH_ALREADY_SETUP EC_ERR(0x54) -+#define EC_VAL_RCB_NEEDS_BUFFER EC_ERR(0x55) /* +GSG 030410 */ -+#define EC_VAL_RCB_DROPPED EC_ERR(0x56) /* +GSG 030410 */ -+#define EC_VAL_INVALID_VALUE EC_ERR(0x57) -+ -+/** -+@defgroup shared_data Shared Data Structures -+ -+The data structures documented here are shared by all modules. -+*/ -+ -+/** -+ * @ingroup shared_data -+ * This is the fragment list structure. Each fragment list entry contains a -+ * length and a data buffer. -+ */ -+typedef struct -+ { -+ bit32u len; /**< Length of the fragment in bytes (lower 16 bits are valid). For SOP, upper 16 bits is the buffer offset. */ -+ void *data; /**< Pointer to fragment data. */ -+ void *OsInfo; /**< Pointer to OS defined data. */ -+ }FRAGLIST; -+ -+#if defined (_CPHAL_CPMAC) -+#define CB_PASSCRC_BIT (1<<26) -+ -+/* CPMAC CPHAL STATUS */ -+#define CPMAC_STATUS_LINK (1 << 0) -+#define CPMAC_STATUS_LINK_DUPLEX (1 << 1) /* 0 - HD, 1 - FD */ -+#define CPMAC_STATUS_LINK_SPEED (1 << 2) /* 0 - 10, 1 - 100 */ -+ -+/* ADAPTER CHECK Codes */ -+ -+#define CPMAC_STATUS_ADAPTER_CHECK (1 << 7) -+#define CPMAC_STATUS_HOST_ERR_DIRECTION (1 << 8) -+#define CPMAC_STATUS_HOST_ERR_CODE (0xF << 9) -+#define CPMAC_STATUS_HOST_ERR_CH (0x7 << 13) -+ -+#define _CPMDIO_DISABLE (1 << 0) -+#define _CPMDIO_HD (1 << 1) -+#define _CPMDIO_FD (1 << 2) -+#define _CPMDIO_10 (1 << 3) -+#define _CPMDIO_100 (1 << 4) -+#define _CPMDIO_NEG_OFF (1 << 5) -+#define _CPMDIO_LOOPBK (1 << 16) -+#define _CPMDIO_NOPHY (1 << 20) -+#endif -+ -+/** -+ * @ingroup shared_data -+ * Channel specific configuration information. This structure should be -+ * populated by upper-layer software prior to calling @c ChannelSetup(). Any -+ * configuration item that can be changed on a per channel basis should -+ * be represented here. Each module may define this structure with additional -+ * module-specific members. -+ */ -+typedef struct -+ { -+ int Channel; /**< Channel number. */ -+ int Direction; /**< DIRECTION_RX(1) or DIRECTION_TX(0). */ -+ OS_SETUP *OsSetup; /**< OS defined information associated with this channel. */ -+ -+#if defined(_CPHAL_AAL5) || defined (_CPHAL_CPSAR) || defined (_CPHAL_CPMAC) -+ int RxBufSize; /**< Size (in bytes) for each Rx buffer.*/ -+ int RxBufferOffset; /**< Number of bytes to offset rx data from start of buffer (must be less than buffer size). */ -+ int RxNumBuffers; /**< The number of Rx buffer descriptors to allocate for Ch. */ -+ int RxServiceMax; /**< Maximum number of packets to service at one time. */ -+ -+ int TxNumBuffers; /**< The number of Tx buffer descriptors to allocate for Ch. */ -+ int TxNumQueues; /**< Number of Tx queues for this channel (1-2). Choosing 2 enables a low priority SAR queue. */ -+ int TxServiceMax; /**< Maximum number of packets to service at one time. */ -+#endif -+ -+#if defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+ int CpcsUU; /**< The 2-byte CPCS UU and CPI information. */ -+ int Gfc; /**< Generic Flow Control. */ -+ int Clp; /**< Cell Loss Priority. */ -+ int Pti; /**< Payload Type Indication. */ -+#endif -+ -+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+ int DaMask; /**< Specifies whether credit issuance is paused when Tx data not available. */ -+ int Priority; /**< Priority bin this channel will be scheduled within. */ -+ int PktType; /**< 0=AAL5,1=Null AAL,2=OAM,3=Transparent,4=AAL2. */ -+ int Vci; /**< Virtual Channel Identifier. */ -+ int Vpi; /**< Virtual Path Identifier. */ -+ int FwdUnkVc; /**< Enables forwarding of unknown VCI/VPI cells to host. 1=enable, 0=disable. */ -+ -+ /* Tx VC State */ -+ int TxVc_CellRate; /**< Tx rate, set as clock ticks between transmissions (SCR for VBR, CBR for CBR). */ -+ int TxVc_QosType; /**< 0=CBR,1=VBR,2=UBR,3=UBRmcr. */ -+ int TxVc_Mbs; /**< Min Burst Size in cells.*/ -+ int TxVc_Pcr; /**< Peak Cell Rate for VBR in clock ticks between transmissions. */ -+ -+ bit32 TxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Tx Ch (must be big endian with 0 PTI). */ -+ int TxVc_OamTc; /**< TC Path to transmit OAM cells for TX connection (0,1). */ -+ int TxVc_VpOffset; /**< Offset to the OAM VP state table. */ -+ /* Rx VC State */ -+ int RxVc_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */ -+ int RxVc_OamToHost; /**< 0=do not pass, 1=pass. */ -+ bit32 RxVc_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx conn (must be big endian with 0 PTI). */ -+ int RxVc_OamTc; /**< TC Path to transmit OAM cells for RX connection (0,1). */ -+ int RxVc_VpOffset; /**< Offset to the OAM VP state table. */ -+ /* Tx VP State */ -+ int TxVp_OamTc; /**< TC Path to transmit OAM cells for TX VP connection (0,1). */ -+ bit32 TxVp_AtmHeader; /**< ATM Header placed on firmware gen'd VP OAM cells for this Tx VP conn (must be big endian with 0 VCI). */ -+ /* Rx VP State */ -+ int RxVp_OamCh; /**< Ch to terminate rx'd OAM cells to be forwarded to the host. */ -+ int RxVp_OamToHost; /**< 0=do not pass, 1=pass. */ -+ bit32 RxVp_AtmHeader; /**< ATM Header placed on firmware gen'd OAM cells for this Rx VP conn (must be big endian with 0 VCI). */ -+ int RxVp_OamTc; /**< TC Path to transmit OAM cells for RX VP connection (0,1). */ -+ int RxVp_OamVcList; /**< Indicates all VC channels associated with this VP channel (one-hot encoded). */ -+#endif -+ -+ -+#ifdef _CPHAL_VDMAVT -+ bit32u RemFifoAddr; /* Mirror mode only. */ -+ bit32u FifoAddr; -+ bit32 PollInt; -+ bit32 FifoSize; -+ int Ready; -+#endif -+ -+ }CHANNEL_INFO; -+ -+/* -+ * This structure contains each statistic value gathered by the CPHAL. -+ * Applications may access statistics data by using the @c StatsGet() routine. -+ */ -+/* STATS */ -+#if defined(_CPHAL_AAL2) || defined(_CPHAL_AAL5) || defined(_CPHAL_CPSAR) -+typedef struct -+ { -+ bit32u CrcErrors[16]; -+ bit32u LenErrors[16]; -+ bit32u DmaLenErrors[16]; -+ bit32u AbortErrors[16]; -+ bit32u StarvErrors[16]; -+ bit32u TxMisQCnt[16][2]; -+ bit32u RxMisQCnt[16]; -+ bit32u RxEOQCnt[16]; -+ bit32u TxEOQCnt[16][2]; -+ bit32u RxPacketsServiced[16]; -+ bit32u TxPacketsServiced[16][2]; -+ bit32u RxMaxServiced; -+ bit32u TxMaxServiced[16][2]; -+ bit32u RxTotal; -+ bit32u TxTotal; -+ } STAT_INFO; -+#endif -+ -+/* -+ * VDMA Channel specific configuration information -+ */ -+#ifdef _CPHAL_AAL2 -+typedef struct -+ { -+ int Ch; /**< Channel Number */ -+ int RemoteEndian; /**< Endianness of remote VDMA-VT device */ -+ int CpsSwap; /**< When 0, octet 0 in CPS pkt located in LS byte of 16-bit word sent to rem VDMA device. When 1, in MS byte. */ -+ }VdmaChInfo; -+#endif -+ -+#ifndef _CPHAL -+ typedef void HAL_DEVICE; -+ typedef void HAL_PRIVATE; -+ typedef void HAL_RCB; -+ typedef void HAL_RECEIVEINFO; -+#endif -+ -+/** -+ * @ingroup shared_data -+ * The HAL_FUNCTIONS struct defines the function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to xxxInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup) (HAL_DEVICE *HalDev, CHANNEL_INFO *Channel, OS_SETUP *OsSetup); -+ int (*ChannelTeardown) (HAL_DEVICE *HalDev, int Channel, int Mode); -+ int (*Close) (HAL_DEVICE *HalDev, int Mode); -+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*Init) (HAL_DEVICE *HalDev); -+ int (*Open) (HAL_DEVICE *HalDev); -+ int (*PacketProcessEnd) (HAL_DEVICE *HalDev); -+ int (*Probe) (HAL_DEVICE *HalDev); -+ int (*RxReturn) (HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag); -+ int (*Send) (HAL_DEVICE *HalDev, FRAGLIST *FragList, int FragCount, int PacketSize, OS_SENDINFO *OsSendInfo, bit32u Mode); -+ int (*Shutdown) (HAL_DEVICE *HalDev); -+ int (*Tick) (HAL_DEVICE *HalDev); -+ -+#ifdef _CPHAL_AAL5 -+ int (*Kick) (HAL_DEVICE *HalDev, int Queue); -+ void (*OamFuncConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig); -+ void (*OamLoopbackConfig) (HAL_DEVICE *HalDev, unsigned int OamConfig, unsigned int *LLID, unsigned int CorrelationTag); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ STAT_INFO* (*StatsGetOld)(HAL_DEVICE *HalDev); -+#endif -+ } HAL_FUNCTIONS; -+ -+/** -+ * @ingroup shared_data -+ * The OS_FUNCTIONS struct defines the function pointers for all upper layer -+ * functions accessible to the CPHAL. The upper layer software is responsible -+ * for providing the correct OS-specific implementations for the following -+ * functions. It is populated by calling InitModule() (done by the CPHAL in -+ * xxxInitModule(). -+ */ -+typedef struct -+ { -+ int (*Control)(OS_DEVICE *OsDev, const char *Key, const char *Action, void *Value); -+ void (*CriticalOn)(void); -+ void (*CriticalOff)(void); -+ void (*DataCacheHitInvalidate)(void *MemPtr, int Size); -+ void (*DataCacheHitWriteback)(void *MemPtr, int Size); -+ int (*DeviceFindInfo)(int Inst, const char *DeviceName, void *DeviceInfo); -+ int (*DeviceFindParmUint)(void *DeviceInfo, const char *Parm, bit32u *Value); -+ int (*DeviceFindParmValue)(void *DeviceInfo, const char *Parm, void *Value); -+ void (*Free)(void *MemPtr); -+ void (*FreeRxBuffer)(OS_RECEIVEINFO *OsReceiveInfo, void *MemPtr); -+ void (*FreeDev)(void *MemPtr); -+ void (*FreeDmaXfer)(void *MemPtr); -+ void (*IsrRegister)(OS_DEVICE *OsDev, int (*halISR)(HAL_DEVICE*, int*), int InterruptBit); -+ void (*IsrUnRegister)(OS_DEVICE *OsDev, int InterruptBit); -+ void* (*Malloc)(bit32u size); -+ void* (*MallocDev)(bit32u Size); -+ void* (*MallocDmaXfer)(bit32u size, void *MemBase, bit32u MemRange); -+ void* (*MallocRxBuffer)(bit32u size, void *MemBase, bit32u MemRange, -+ OS_SETUP *OsSetup, HAL_RECEIVEINFO *HalReceiveInfo, -+ OS_RECEIVEINFO **OsReceiveInfo, OS_DEVICE *OsDev); -+ void* (*Memset)(void *Dest, int C, bit32u N); -+ int (*Printf)(const char *Format, ...); -+ int (*Receive)(OS_DEVICE *OsDev,FRAGLIST *FragList,bit32u FragCount, -+ bit32u PacketSize,HAL_RECEIVEINFO *HalReceiveInfo, bit32u Mode); -+ int (*SendComplete)(OS_SENDINFO *OsSendInfo); -+ int (*Sprintf)(char *S, const char *Format, ...); -+ int (*Strcmpi)(const char *Str1, const char *Str2); -+ unsigned int (*Strlen)(const char *S); -+ char* (*Strstr)(const char *S1, const char *S2); -+ unsigned long (*Strtoul)(const char *Str, char **Endptr, int Base); -+ void (*TeardownComplete)(OS_DEVICE *OsDev, int Ch, int Direction); -+ } OS_FUNCTIONS; -+ -+/************** MODULE SPECIFIC STUFF BELOW **************/ -+ -+#ifdef _CPHAL_CPMAC -+ -+/* -+int halCpmacInitModule(HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, int (*osBridgeInitModule)(OS_FUNCTIONS *), void* (*osMallocDev) (bit32u), int *Size, int inst); -+*/ -+ -+int halCpmacInitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_AAL5 -+/* -+ * @ingroup shared_data -+ * The AAL5_FUNCTIONS struct defines the AAL5 function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+/* -+typedef struct -+ { -+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(HAL_DEVICE *HalDev, int Mode); -+ int (*Init)(HAL_DEVICE *HalDev); -+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(HAL_DEVICE *HalDev); -+ int (*InfoGet)(HAL_DEVICE *HalDev, int Key, void *Value); -+ int (*Probe)(HAL_DEVICE *HalDev); -+ int (*RxReturn)(HAL_RECEIVEINFO *HalReceiveInfo, int StripFlag); -+ int (*Send)(HAL_DEVICE *HalDev,FRAGLIST *FragList,int FragCount, -+ int PacketSize,OS_SENDINFO *OsSendInfo,int Ch, int Queue, -+ bit32u Mode); -+ int (*StatsClear)(HAL_DEVICE *HalDev); -+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev); -+ int (*Status)(HAL_DEVICE *HalDev); -+ void (*Tick)(HAL_DEVICE *HalDev); -+ int (*Kick)(HAL_DEVICE *HalDev, int Queue); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ } AAL5_FUNCTIONS; -+*/ -+ -+int cpaal5InitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ HAL_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_AAL2 -+/** -+ * @ingroup shared_data -+ * The AAL2_FUNCTIONS struct defines the AAL2 function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to cphalInitModule(). -+ */ -+typedef struct -+ { -+ int (*ChannelSetup)(HAL_DEVICE *HalDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *HalDev, int Ch, int Mode); -+ int (*Close)(HAL_DEVICE *HalDev, int Mode); -+ int (*Init)(HAL_DEVICE *HalDev); -+ int (*ModeChange)(HAL_DEVICE *HalDev, char *DeviceParms); -+ int (*Open)(HAL_DEVICE *HalDev); -+ int (*OptionsGet)(HAL_DEVICE *HalDev, char *Key, bit32u *Value); -+ int (*Probe)(HAL_DEVICE *HalDev); -+ -+ int (*StatsClear)(HAL_DEVICE *HalDev); -+ STAT_INFO* (*StatsGet)(HAL_DEVICE *HalDev); -+ int (*Status)(HAL_DEVICE *HalDev); -+ void (*Tick)(HAL_DEVICE *HalDev); -+ int (*Aal2UuiMappingSetup)(HAL_DEVICE *HalDev, int VC, int UUI, -+ int VdmaCh, int UUIDiscard); -+ int (*Aal2RxMappingSetup)(HAL_DEVICE *HalDev, int VC, int CID, -+ int LC); -+ int (*Aal2TxMappingSetup)(HAL_DEVICE *HalDev, int VC, int LC, int VdmaCh); -+ int (*Aal2VdmaChSetup)(HAL_DEVICE *HalDev, bit32u RemVdmaVtAddr, -+ VdmaChInfo *VdmaCh); -+ volatile bit32u* (*RegAccess)(HAL_DEVICE *HalDev, bit32u RegOffset); -+ int (*Aal2ModeChange)(HAL_DEVICE *HalDev, int Vc, int RxCrossMode, -+ int RxMultiMode, int TxMultiMode, int SchedMode, -+ int TcCh); -+ void (*Aal2VdmaEnable)(HAL_DEVICE *HalDev, int Ch); -+ int (*Aal2VdmaDisable)(HAL_DEVICE *HalDev, int Ch); -+ } AAL2_FUNCTIONS; -+ -+int cpaal2InitModule(HAL_DEVICE **HalDev, -+ OS_DEVICE *OsDev, -+ AAL2_FUNCTIONS **HalFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+#ifdef _CPHAL_VDMAVT -+/** -+ * @ingroup shared_data -+ * The VDMA_FUNCTIONS struct defines the HAL function pointers used by upper layer -+ * software. The upper layer software receives these pointers through the -+ * call to InitModule(). -+ * -+ * Note that this list is still under definition. -+ */ -+typedef struct -+ { -+ bit32 (*Init)( HAL_DEVICE *VdmaVtDev); -+ /* bit32 (*SetupTxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem, -+ bit32u Addr, bit32u Size, bit32u PollInt); -+ bit32 (*SetupRxFifo)(HAL_DEVICE *VdmaVtDev, bit32u LclRem, -+ bit32u Addr, bit32u Size, bit32u PollInt); */ -+ bit32 (*Tx)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Rx)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*SetRemoteChannel)(HAL_DEVICE *VdmaVtDev, bit32u RemAddr, -+ bit32u RemDevID); -+ bit32 (*ClearRxInt)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*ClearTxInt)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Open)(HAL_DEVICE *VdmaVtDev); -+ bit32 (*Close)(HAL_DEVICE *VdmaVtDev); -+ int (*Control) (HAL_DEVICE *HalDev, const char *Key, const char *Action, void *Value); -+ int (*ChannelSetup)(HAL_DEVICE *VdmaVtDev, CHANNEL_INFO *HalCh, OS_SETUP *OsSetup); -+ int (*ChannelTeardown)(HAL_DEVICE *VdmaVtDev, int Ch, int Mode); -+ int (*Send)(HAL_DEVICE *VdmaVtDev,FRAGLIST *FragList,int FragCount, -+ int PacketSize,OS_SENDINFO *OsSendInfo,bit32u Mode); -+ } VDMA_FUNCTIONS; -+ -+int VdmaInitModule(HAL_DEVICE **VdmaVt, -+ OS_DEVICE *OsDev, -+ VDMA_FUNCTIONS **VdmaVtFunc, -+ OS_FUNCTIONS *OsFunc, -+ int OsFuncSize, -+ int *HalFuncSize, -+ int Inst); -+#endif -+ -+/* -+extern int cphalInitModule(MODULE_TYPE ModuleType, HAL_DEVICE **HalDev, OS_DEVICE *OsDev, HAL_FUNCTIONS *HalFunc, -+ int (*osInitModule)(OS_FUNCTIONS *), void* (*osMallocDev)(bit32u), -+ int *Size, int Inst); -+*/ -+ -+ -+#ifdef _CPHAL_AAL5 -+extern const char hcSarFrequency[]; -+#endif -+ -+#ifdef _CPHAL_CPMAC -+/* following will be common, once 'utl' added */ -+extern const char hcClear[]; -+extern const char hcGet[]; -+extern const char hcSet[]; -+extern const char hcTick[]; -+ -+extern const char hcCpuFrequency[]; -+extern const char hcCpmacFrequency[]; -+extern const char hcMdioBusFrequency[]; -+extern const char hcMdioClockFrequency[]; -+extern const char hcCpmacBase[]; -+extern const char hcPhyNum[]; -+extern const char hcSize[]; -+extern const char hcCpmacSize[]; -+extern const char hcPhyAccess[]; -+#endif -+ -+#endif /* end of _INC_ */ -diff -urN linux.old/drivers/atm/sangam_atm/dev_host_interface.h linux.dev/drivers/atm/sangam_atm/dev_host_interface.h ---- linux.old/drivers/atm/sangam_atm/dev_host_interface.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dev_host_interface.h 2005-08-23 04:46:50.091844608 +0200 -@@ -0,0 +1,1162 @@ -+#ifndef __DEV_HOST_INTERFACE_H__ -+#define __DEV_HOST_INTERFACE_H__ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: Public header file for the Host-to-DSP interface -+******************************************************************************** -+* -+* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION -+* -+* (C) Copyright Texas Instruments Inc. 2002. All rights reserved. -+* -+* Property of Texas Instruments Incorporated -+* -+* Restricted Rights - Use, duplication, or disclosure is subject to -+* restrictions set forth in TI's program license agreement and -+* associated documentation -+* -+* -+* FILE NAME: dev_host_interface.h -+* -+* DESCRIPTION: -+* This header file defines the variables and parameters used between the -+* host processor and the DSP. This file is included in both the DSP -+* software and the host software. -+* -+* RULES FOR MODIFICATION AND USE OF THIS FILE: -+* -+* --The main pointer to the struct of pointers will always be at the same fixed -+* location (0x80000000). -+* -+* --Each pointer element in the struct of pointers (indicated by the main pointer) -+* will always point to a struct only. -+* -+* --Any new structures added to the host interface in subsequent versions must -+* each have a corresponding new pointer element added to the END of the struct -+* of pointers. Other than this, there will never be any moving or rearranging -+* of the pointer elements in the struct of pointers. -+* -+* --Any new elements added to existing structures will be added at the END of the -+* structure. Other than this, there will never be any moving or rearranging -+* of structure elements. -+* -+* --A new structure will never be added as a new element in an old structure. -+* New structures must be added separately with a new entry in the struct of -+* pointers, as noted above. -+* -+* --Also, the sizes of existing arrays within old structures will never be changed. -+* -+* --The modem code in the DSP will never reference the struct of pointers in order -+* to avoid aliasing issues in the DSP code. The modem code will only use the -+* specific structures directly. -+* -+* --The host processor never accesses the DSP side of the ATM-TC hardware directly. -+* The DSP interfaces directly to the ATM-TC hardware and relays information to -+* the host processor through the host interface. -+* -+* --The host processor can track the modem's transition through important states -+* by accessing the Modem State Bit Field in the host interface. Each bit in -+* the bit field represents an important state to track in the modem. As the -+* modem transitions through each important state, the corresponding bit will -+* change from a zero to a one. Each bit in the bit field will only be reset to -+* zero if the modem retrains. If new states need to be tracked and are added -+* in subsequent versions of the host interface, a corresponding bit will be -+* added at the END of the bit field to ensure backwards compatibility. The -+* Modem State Bit Field is reset if the modem retrains or falls out of Showtime. -+* -+* --An interrupt will be sent to the host processor when a change occurs in the -+* Modem State Bit Field. There is an interrupt masking register which can mask -+* specific interrupts corresponding to the bits of the Modem State Bit Field. -+* This allows the host to keep an interrupt from being generated for those -+* states that are masked. -+* -+* HISTORY: -+* -+* 11/20/02 J. Bergsagel Written from the previous host interface file -+* 11/27/02 J. Bergsagel Added comments for mailbox control struct and -+* fixed a couple items for overlay page stuff. -+* Also, added temporary elements for SWTC code. -+* 12/04/02 J. Bergsagel Added extra dummy byte to DEV_HOST_eocVarDef_t -+* for proper word alignment. -+* 12/12/02 J. Bergsagel Changed initial states in the modem state bit field -+* and added more instructions for adding more states. -+* 12/16/02 J. Bergsagel Changed name "hostVersion_p" to "hostIntfcVersion_p". -+* Removed dspAturState from DEV_HOST_modemStateBitField_t. -+* Reorganized several struct elements to clean up the -+* host interface. -+* 12/27/02 Sameer V Added missing channel 0 statistics for TC. Added -+* ocd error information. -+* 12/27/02 Sameer V Added overlayState to OlayDP_Parms to indicate whether -+* overlays are being executed in current state. -+* 01/06/03 J. Bergsagel Added maxAllowedMargin and minRequiredMargin to -+* DEV_HOST_msg_t. -+* Renamed TC chan 1 items to be chan 0 items to start out. -+* 01/17/03 Sameer V Moved delineationState to atmStats structure. -+* 01/21/03 Barnett Implemented Ax7 UNIT-MODULE modular software framework. -+* 01/22/03 J. Bergsagel Added warning comments for certain struct typedefs. -+* 01/23/03 C. Perez-N. Removed old AX5-only diags. command/response entries in the -+* HOST and DSP ennumerations, and added the AX7 new ones -+* Added pointer entries in the DEV_HOST_dspOamSharedInterface_t -+* structure pointing to the analog diags. input/output/options -+* structures. -+* 01/29/03 Sameer V Removed TC_IDLE in enum for delineation state. Hardware -+* only reports TC_HUNT, TC_PRESYNC and TC_SYNC. -+* 03/07/03 Sameer/Jonathan Put SWTC token around structs and elements only used by SWTC -+* 03/12/03 Mannering Add CO profile data structures -+* 03/18/03 J. Bergsagel Removed the obsolete DSP_CHECK_TC response message. -+* 03/24/03 J. Bergsagel Added DEV_HOST_hostInterruptMask_t for masking DSP interrupt sources -+* 03/28/03 C. Perez-N Changed the C-style comments and made them C++ sytle instead. -+* Replaced the occurrences of "SINT32 *" pointer declarations with -+* "PSINT32" -+* 03/28/03 Mannering Update CO profile data structures -+* 04/04/03 S. Yim Add host I/F hooks for switchable hybrid and RJ11 -+* inner/outer pair selection -+* 04/11/03 J. Bergsagel Changed modem state bit field struct types to enums instead and used -+* a single integer variable for each "bitfield". -+* Changed bit field for host interrupt masks to an integer value also. -+* 04/14/03 J. Bergsagel Changed name of table pointer "meanSquareTblDstrm_p" to "marginTblDstrm_p". -+* 04/03/03 Umesh Iyer CMsg1 and RMsg1 use the same storage as CMSGPCB and RMSGPCB. -+* The string lengths for these have been adjusted to hold the longest -+* message in each case. The PCB messages from ADSL2 are longer. -+* 04/21/03 Sameeer V Added new host mailbox message for shutting down the DSLSS peripherals. -+* 04/23/03 J. Bergsagel Fixed comments for overlay mailbox messages and for losErrors. -+* 04/28/03 Mannering Added skip phase op flag to CO profile data structure -+* 05/05/03 Mannering Review Comments - Removed "#if CO_PROFILE" from around structure -+* definitions and define the number of profiles (DEV_HOST_LIST_ENTRIES) -+* 05/13/03 J. Bergsagel Added new elements to DEV_HOST_phyPerf_t for host control of hybrid. -+* 05/15/03 J. Bergsagel Added "farEndLosErrors" and "farEndRdiErrors" to DEV_HOST_modemStatsDef_t. -+* 05/16/03 Mannering Updated CO profile structure to support updated bit allocation and -+* interopability. -+* 05/20/03 Sameer V Added DSP message to inicate DYING GASP. -+* 05/22/03 J. Bergsagel Added a new struct typedef "DEV_HOST_hostInterruptSource_t". -+* Added "atucGhsRevisionNum" to "DEV_HOST_dspWrNegoParaDef_t". -+* Moved the following struct typedef's here to the public host interface: -+* DEV_HOST_dspBitSwapDef_t -+* DEV_HOST_atmDsBert_t -+* 05/28/03 A. Redfern Changed pointer type and location for margin reporting. -+* 05/28/03 Mannering Moved CO profile defines to dev_host_interface_pvt.h -+* 05/28/03 J. Bergsagel Moved subStateIndex and STM BERT controls into new struct "DEV_HOST_modemEnvPublic_t" -+* 05/29/03 J. Bergsagel Added elements to "DEV_HOST_modemEnvPublic_t" for host control of DSLSS LED's. -+* 06/10/03 Umesh Iyer Modified trainMode check to be compliant with the new host i/f mods. -+* 06/05/03 J. Bergsagel Added enum that will eventually replace the bitfield: DEV_HOST_diagAnlgOptionsVar_t. -+* Added new element "currentHybridNumUsed" in the DEV_HOST_phyPerf_t typedef -+* Added new host control flags for LPR signal detection on GPIO[0]. -+* 06/06/03 A. Redfern Removed fine gain scale from the CO profile and added max downstream power cutback. -+* Changed "test1" in CO profile struct to "phyEcDelayAdjustment". -+* 06/26/03 J. Bergsagel Added genericStructure typedef and two pointer elements of this type in the big table. -+* 07/03/03 Jack Huang Renamed test2 to bSwapThresholdUpdate -+* 07/07/03 Mallesh Changed phySigTxPowerCutback_f flag to a variable phySigTxGainReductionAt0kft which indicates the -+* amount of gain reduction in linear scale. -+* 07/15/03 Sameer V Changed DEV_HOST_diagAnlgOptionsVar_t to be an enum instead of a bit field. Host code -+* does not support setting bit fields. -+* 07/22/03 Jack Huang Added bitswap control flag in host i/f for API calls -+* 08/06/03 Sameer V Added missingToneDs_p to the DEV_HOST_oamWrNegoParaDef_t to enable host to switch off -+* DS tones on specified bins -+* 08/21/03 Jack Huang Added pcbEnabled flag in the DEV_HOST_modemEnvPublic_t structure -+* Added g.hs buffer definitions to DEV_HOST_dspOamSharedInterface_t -+* Added DEV_HOST_consBufDef_t to the DEV_HOST_dspOamSharedInterface_t structure -+* 08/26/03 J. Bergsagel Fixed name of "missingToneDs_p" to be "missingToneDsAddr" instead (since it is -+* not really used as a pointer). -+* 09/11/03 Mallesh Added a flag "usPilotInT1413ModeInMedley" to determine the need to send Upstream Pilot -+* in medley in T1.413 mode. -+* 09/12/03 J. Bergsagel Changed "test3" to "phyBitaFastPathExcessFineGainBump" in CO profile struct. -+* Changed "test4" to "phyBitaSkipGapAdjustment" in CO profile struct. -+* 09/23/03 J. Bergsagel Changed "T1413vendorRevisionNumber" to "vendorRevisionNumber" in DEV_HOST_msg_t. -+* Added ADSL2 and ADSL2 diag. states to the modem state bit field. -+* 10/01/03 J. Bergsagel Changed define of "MULTI_MODE" to be 255 to indicate that all possible bits -+* in the 8-bit bit field are turned on for any current and future training modes. -+* 10/09/03 M. Turkboylari Added DSP_TRAINING_MSGS and adsl2DeltMsgs_p, which is a pointer to a pointer, -+* in order to pass the ADSL2 training and DELT messages to the host side. This is for ACT. -+* 10/20/03 Mallesh Added a GHS state enumerator for cleardown -+* 10/20/03 Xiaohui Li Add definition for READSL2_MODE and READSL2_DELT -+* 11/07/03 J. Bergsagel Removed all code for when SWTC==1, which therefore allows removal of include of -+* "env_def_defines.h". We shouldn't have any compile tokens used in this file. -+* (the SWTC token is always off in any Ax7 code). -+* 11/14/03 J. Bergsagel Also removed READSL2_ENABLE token (no more compile tokens to be used in this .h file). -+* 12/12/03 Sameer/Ram Added DEV_HOST_EOCAOC_INTERRUPT_MASK to enable host to disable response code for AOC/EOC -+* mailbox messages -+* 12/09/03 Jack Huang Changed G.hs txbuf size from 60 to 64 to fit the max segment size -+* 12/15/03 Mallesh Changed vendor ID type defenition from SINT16 to UINT16 -+* 12/23/03 Sameer V Added ability to turn off constellation display reporting to host using oamFeature bit field. -+* 12/24/03 Sameer V Changed comment for Constellation Display Current Address to Host Write instead of DSP Write. -+* 12/26/03 Sameer/Ram Added DEV_HOST_GHSMSG_INTERRUPT_MASK to enable host to disable response code for GHS Messages -+* (C) Copyright Texas Instruments Inc. 2002. All rights reserved. -+*******************************************************************************/ -+ -+#include "dev_host_verdef.h" -+ -+// --------------------------------------------------------------------------------- -+// Address of the pointer to the DEV_HOST_dspOamSharedInterface_s struct of pointers -+// This is where it all starts. -+// --------------------------------------------------------------------------------- -+#define DEV_HOST_DSP_OAM_POINTER_LOCATION 0x80000000 -+ -+// The define "MAX_NUM_UPBINS" is used in "DEV_HOST_diagAnlgInputVar_t" below. -+// This value can never be changed (for host intf. backwards compatibility) -+#define MAX_NUM_UPBINS 64 -+ -+// ----------------------------------------------- -+// Begin common enumerations between DSP and host. -+// ----------------------------------------------- -+ -+// These Host-to-DSP commands are organized into two groups: -+// immediate state change commands and status affecting commands. -+// Do not add or remove commands except at the bottom since the DSP assumes this sequence. -+ -+enum -+{ -+ HOST_ACTREQ, // Send R-ACKREQ and monitor for C-ACKx -+ HOST_QUIET, // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE -+ HOST_XMITBITSWAP, // Perform upstream bitswap - FOR INTERNAL USE ONLY -+ HOST_RCVBITSWAP, // Perform downstream bitswap - FOR INTERNAL USE ONLY -+ HOST_RTDLPKT, // Send a remote download packet - FOR INTERNAL USE ONLY -+ HOST_CHANGELED, // Read the LED settings and change accordingly -+ HOST_IDLE, // Sit quiet -+ HOST_REVERBTEST, // Generate REVERB for manufacturing test -+ HOST_CAGCTEST, // Set coarse receive gain for manufacturing test -+ HOST_DGASP, // send Dying Gasp messages through EOC channel -+ HOST_GHSREQ, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSMSG, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHS_SENDGALF, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSEXIT, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSMSG1, // G.hs - FOR INTERNAL USE ONLY -+ HOST_HYBRID, // Enable/Disable automatic hybrid switch -+ HOST_RJ11SELECT, // RJ11 inner/outer pair select -+ HOST_DIGITAL_MEM, // Digital Diags: run external memory tests -+ HOST_TXREVERB, // AFE Diags: TX path Reverb -+ HOST_TXMEDLEY, // AFE Diags: TX path Medley -+ HOST_RXNOISEPOWER, // AFE Diags: RX noise power -+ HOST_ECPOWER, // AFE Diags: RX eco power -+ HOST_ALL_ADIAG, // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions -+ HOST_USER_ADIAG, // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified -+ HOST_QUIT_ADIAG, // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY -+ HOST_NO_CMD, // All others - G.hs - FOR INTERNAL USE ONLY -+ HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message -+ HOST_SET_GENERIC, // Set generic CO profile -+ HOST_UNDO_GENERIC, // Set profile previous to Generic -+ HOST_GHS_CLEARDOWN // G.hs - FOR INTERNAL USE ONLY to start cleardown -+}; -+ -+// These DSP-to-Host responses are organized into two groups: -+// responses to commands and requests for OAM services. -+ -+enum -+{ -+ DSP_IDLE, // R_IDLE state entered -+ DSP_ACTMON, // R_ACTMON state entered -+ DSP_TRAIN, // R_TRAIN state entered -+ DSP_ACTIVE, // R_ACTIVE state entered -+ DSP_XMITBITSWAP, // Upstream bitswap complete - FOR INTERNAL USE ONLY -+ DSP_RCVBITSWAP, // Downstream bitswap complete - FOR INTERNAL USE ONLY -+ DSP_RTDL, // R_RTDL state entered - FOR INTERNAL USE ONLY -+ DSP_RRTDLPKT, // RTDL packet received - FOR INTERNAL USE ONLY -+ DSP_XRTDLPKT, // RTDL packet transmitted - FOR INTERNAL USE ONLY -+ DSP_ERROR, // Command rejected, wrong state for this command -+ DSP_REVERBTEST, // Manufacturing REVERB test mode entered -+ DSP_CAGCTEST, // Manufacturing receive gain test done -+ DSP_OVERLAY_START, // Notify host that page overlay has started - overlay number indicated by "tag" -+ DSP_OVERLAY_END, // Notify host that page overlay has ended - overlay number indicated by "tag" -+ DSP_CRATES1, // CRATES1 message is valid and should be copied to host memory now -+ DSP_SNR, // SNR calculations are ready and should be copied to host memory now -+ DSP_GHSMSG, // G.hs - FOR INTERNAL USE ONLY -+ DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes). -+ DSP_ATM_TC_SYNC, // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer. -+ DSP_ATM_NO_TC_SYNC, // Indicates loss of sync on phy layer on either US or DS. -+ DSP_HYBRID, // DSP completed hybrid switch -+ DSP_RJ11SELECT, // DSP completed RJ11 inner/outer pair select -+ DSP_INVALID_CMD, // Manufacturing (Digital and AFE) diags: CMD received not recognized -+ DSP_TEST_PASSED, // Manufacturing diags: test passed -+ DSP_TEST_FAILED, // Manufacturing diags: test failed -+ DSP_TXREVERB, // Manufacturing AFE diags: Response to HOST_TXREVERB -+ DSP_TXMEDLEY, // Manufacturing AFE diags: Response to HOST_TXMEDLEY -+ DSP_RXNOISEPOWER, // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER -+ DSP_ECPOWER, // Manufacturing AFE diags: Response to HOST_ECPOWER -+ DSP_ALL_ADIAG, // Manufacturing AFE diags: Response to HOST_ALL_ADIAG -+ DSP_USER_ADIAG, // Manufacturing AFE diags: Response to HOST_USER_ADIAG -+ DSP_QUIT_ADIAG, // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG -+ DSP_DGASP, // DSP Message to indicate dying gasp -+ DSP_EOC, // DSP Message to indicate that DSP sent an EOC message to CO -+ DSP_TRAINING_MSGS // DSP Message to indicate that host has to copy the training message specified in the tag field. -+}; -+ -+// Define different ADSL training modes. -+//Defintions as per new host interface. -+#define NO_MODE 0 -+#define GDMT_MODE 2 -+#define GLITE_MODE 4 -+#define ADSL2_MODE 8 -+#define ADSL2_DELT (ADSL2_MODE+1) -+#define ADSL2PLUS_MODE 16 -+#define ADSL2PLUS_DELT (ADSL2PLUS_MODE+1) -+#define READSL2_MODE 32 -+#define READSL2_DELT (READSL2_MODE+1) -+#define T1413_MODE 128 -+#define MULTI_MODE 255 // all possible bits are set in the bit field -+ -+// Define the reason for dropping the connection -+ -+enum -+{ -+ REASON_LOS = 0x01, -+ REASON_DYING_GASP = 0x02, -+ REASON_USCRCERR = 0x04, -+ REASON_MARGIN_DROP = 0x08 -+}; -+ -+ -+// ---------------------------------------------------- -+// Begin modem state bit field definitions - DSP write. -+// ---------------------------------------------------- -+ -+// BitField1 for initial states and G.hs states. -+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes -+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written -+// that causes the proper values to be entered into the modem state bit fields. -+typedef enum -+{ -+ ZERO_STATE1 = 0, -+ RTEST = 0x1, -+ RIDLE = 0x2, -+ RINIT = 0x4, -+ RRESET = 0x8, -+ GNSFLR = 0x10, -+ GTONE = 0x20, -+ GSILENT = 0x40, -+ GNEGO = 0x80, -+ GFAIL = 0x100, -+ GACKX = 0x200, -+ GQUIET2 = 0x400 -+} DEV_HOST_stateBitField1_t; // this enum should only have 32 bit entries in it. Add another enum if you need more. -+ -+// BitField2 for T1.413 states and for the rest of the modem states (so far) -+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes -+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written -+// that causes the proper values to be entered into the modem state bit fields. -+typedef enum -+{ -+ ZERO_STATE2 = 0, -+ TNSFLR = 0x1, -+ TACTREQ = 0x2, -+ TACTMON = 0x4, -+ TFAIL = 0x8, -+ TACKX = 0x10, -+ TQUIET2 = 0x20, -+ RQUIET2 = 0x40, -+ RREVERB1 = 0x80, -+ RQUIET3 = 0x100, -+ RECT = 0x200, -+ RREVERB2 = 0x400, -+ RSEGUE1 = 0x800, -+ RREVERB3 = 0x1000, -+ RSEGUE2 = 0x2000, -+ RRATES1 = 0x4000, -+ RMSGS1 = 0x8000, -+ RMEDLEY = 0x10000, -+ RREVERB4 = 0x20000, -+ RSEGUE3 = 0x40000, -+ RMSGSRA = 0x80000, -+ RRATESRA = 0x100000, -+ RREVERBRA = 0x200000, -+ RSEGUERA = 0x400000, -+ RMSGS2 = 0x800000, -+ RRATES2 = 0x1000000, -+ RREVERB5 = 0x2000000, -+ RSEGUE4 = 0x4000000, -+ RBNG = 0x8000000, -+ RREVERB6 = 0x10000000, -+ RSHOWTIME = 0x20000000 -+} DEV_HOST_stateBitField2_t; // this enum should only have 32 bit entries in it. Add another enum if you need more. -+ -+// BitField3 for ADSL2 states -+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes -+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written -+// that causes the proper values to be entered into the modem state bit fields. -+typedef enum -+{ -+ ZERO_STATE3 = 0, -+ G2QUIET1 = 0x1, -+ G2COMB1 = 0x2, -+ G2QUIET2 = 0x4, -+ G2COMB2 = 0x8, -+ G2ICOMB1 = 0x10, -+ G2LINEPROBE = 0x20, -+ G2QUIET3 = 0x40, -+ G2COMB3 = 0x80, -+ G2ICOMB2 = 0x100, -+ G2RMSGFMT = 0x200, -+ G2RMSGPCB = 0x400, -+ G2REVERB1 = 0x800, -+ G2QUIET4 = 0x1000, -+ G2REVERB2 = 0x2000, -+ G2QUIET5 = 0x4000, -+ G2REVERB3 = 0x8000, -+ G2ECT = 0x10000, -+ G2REVERB4 = 0x20000, -+ G2SEGUE1 = 0x40000, -+ G2REVERB5 = 0x80000, -+ G2SEGUE2 = 0x100000, -+ G2RMSG1 = 0x200000, -+ G2MEDLEY = 0x400000, -+ G2EXCHANGE = 0x800000, -+ G2RMSG2 = 0x1000000, -+ G2REVERB6 = 0x2000000, -+ G2SEGUE3 = 0x4000000, -+ G2RPARAMS = 0x8000000, -+ G2REVERB7 = 0x10000000, -+ G2SEGUE4 = 0x20000000 -+} DEV_HOST_stateBitField3_t; // this enum should only have 32 bit entries in it. Add another enum if you need more. -+ -+// BitField4 for ADSL2 diag. states -+// If more values need to be added, they will be added at the end (up to 32 total entries). However, if this causes -+// the state transitions to tick off out of normal bit order, then the C code will have to be re-written -+// that causes the proper values to be entered into the modem state bit fields. -+typedef enum -+{ -+ ZERO_STATE4 = 0, -+ GDSEGUE1 = 0x1, -+ GDREVERB5 = 0x2, -+ GDSEGUE2 = 0x4, -+ GDEXCHANGE = 0x8, -+ GDSEGUELD = 0x10, -+ GDRMSGLD = 0x20, -+ GDQUIET1LD = 0x40, -+ GDQUIET2LD = 0x80, -+ GDRACK1 = 0x100, -+ GDRNACK1 = 0x200, -+ GDQUIETLAST = 0x400 -+} DEV_HOST_stateBitField4_t; // this enum should only have 32 bit entries in it. Add another enum if you need more. -+ -+// This struct collects all of the bitfield types listed above for the modem state bit field(s) -+typedef struct -+{ -+ DEV_HOST_stateBitField1_t bitField1; // this is the first modem state bit field (mostly init. and G.hs) -+ DEV_HOST_stateBitField2_t bitField2; // this is the second modem state bit field (T1.413 and G.dmt) -+ DEV_HOST_stateBitField3_t bitField3; // this is the third modem state bit field (ADSL2) -+ DEV_HOST_stateBitField4_t bitField4; // this is the fourth modem state bit field (ADSL2 diag.) -+} DEV_HOST_modemStateBitField_t; -+ -+ -+// ----------------------------------------------- -+// Begin NegoPara message definitions - DSP write. -+// ----------------------------------------------- -+ -+typedef struct -+{ -+ UINT8 trainMode; // Train mode selected. See training modes defined above. -+ UINT8 bDummy1; // dummy byte for explicit 32-bit alignment -+ UINT16 lineLength; // Contains loop length estimate. Accuracy w/i 500 ft. LSbit = 1 for straight loop, = 0 for bridge tap -+ UINT32 atucVendorId; // Pass the vendor id of the CO to the host -+ UINT8 cMsgs1[8]; // CMsgs1 and CMSGPCB -+ UINT16 adsl2DSRate; // -+ UINT8 cRates2; // -+ UINT8 rRates2; // -+ UINT8 rRates1[4][11]; // -+ UINT8 cMsgs2[4]; // -+ UINT8 cRates1[4][30]; // -+ UINT8 rMsgs2[4]; // -+ UINT16 adsl2USRate; // -+ UINT8 atucGhsRevisionNum; // Pass the G.hs Revision number of the CO to the host -+ UINT8 reserved1; // -+ PUINT8 *adsl2DeltMsgs_p; // This pointer to a pointer passes the address of the globalvar.pString, which is also -+ // a pointer list of pointers. It will be used to pass all the new ADSL2 DELT messages to -+ // host side. This is for ACT. -+} DEV_HOST_dspWrNegoParaDef_t; -+ -+ -+// ---------------------------------------------------- -+// Begin OAM NegoPara message definitions - Host write. -+// ---------------------------------------------------- -+ -+// OAM Feature bit fields. -+// -+// Bit 0 - Enable auto retrain of modem -+// Bit 1 - Detect and report TC sync to host -+// Bit 2-31 - Reserved -+ -+#define DEV_HOST_AUTORETRAIN_ON 0x00000001 -+#define DEV_HOST_TC_SYNC_DETECT_ON 0x00000002 -+ -+#define DEV_HOST_AUTORETRAIN_MASK 0x00000001 -+#define DEV_HOST_TC_SYNC_DETECT_MASK 0x00000002 -+#define DEV_HOST_EOCAOC_INTERRUPT_MASK 0x00000004 -+#define DEV_HOST_CONS_DISP_DISABLE_MASK 0x00000008 -+#define DEV_HOST_GHSMSG_INTERRUPT_MASK 0x00000010 -+ -+typedef struct -+{ -+ UINT8 stdMode; // Desired train mode. See training modes defined above. -+ UINT8 ghsSequence; // Selected G.hs session as shown in Appendix 1 -+ UINT8 usPilotFlag; // Value of 1 indicates transmit an upstream pilot on bin 16 -+ UINT8 bDummy1; // dummy byte for 32-bit alignment -+ UINT8 rMsgs1[38]; // RMSG-1(6) and RMSG_PCB (38) -+ UINT8 bDummy2[2]; // dummy bytes for 32-bit alignment -+ UINT32 oamFeature; // 32 bit wide bit field to set OAM-specific features. -+ SINT8 marginThreshold; // Threshold for margin reporting -+ UINT8 hostFixAgc; // flag to force datapump to bypass AGC training and use the following values -+ UINT8 hostFixEqualizer; // forced analog equalizer value used during AGC training when hostfix_agc is on -+ UINT8 hostFixPga1; // forced pga1 value used during AGC training when hostFixAgc is on -+ UINT8 hostFixPga2; // forced pga2 value used during AGC training when hostFixAgc is on -+ UINT8 hostFixPga3; // forced pga3 value used during AGC training when hostFixAgc is on -+ UINT8 marginMonitorShwtme; // margin monitoring flag (during showtime) -+ UINT8 marginMonitorTrning; // margin monitoring flag (during training) -+ UINT8 disableLosAlarm; // flag to disable training based on los -+ UINT8 usCrcRetrain; // flag to disable retrain due to excessive USCRC -+ UINT8 t1413VendorId[2]; // Vendor ID used for T1.413 trainings -+ UINT8 gdmtVendorId[8]; // Vendor ID used for G.dmt trainings (ITU VendorID) -+ UINT8 missingTones[64]; // 64 element array to define missing tones for TX_MEDLEY and TX REVERB tests -+ UINT32 missingToneDsAddr; // Address given to DSP for tones to be switched off in DS direction -+ UINT8 dsToneTurnoff_f; // This flag controls the DS tone turn off logic -+ UINT8 reserved1; // Dummy bytes -+ UINT8 reserved2; // Dummy bytes -+ UINT8 reserved3; // Dummy bytes -+} DEV_HOST_oamWrNegoParaDef_t; -+ -+ -+// ---------------------------------------- -+// Begin Rate-adaptive message definitions. -+// ---------------------------------------- -+ -+// The four values below can never be changed (for host intf. backwards compatibility) -+#define DEV_HOST_RMSGSRA_LENGTH 10 -+#define DEV_HOST_RRATESRA_LENGTH 1 -+#define DEV_HOST_CRATESRA_LENGTH 120 -+#define DEV_HOST_CMSGSRA_LENGTH 6 -+ -+typedef struct -+{ -+ UINT8 rRatesRaString[DEV_HOST_RRATESRA_LENGTH+3]; -+ UINT8 rMsgsRaString[DEV_HOST_RMSGSRA_LENGTH+2]; -+ UINT8 cMsgsRaString[DEV_HOST_CMSGSRA_LENGTH+2]; -+} DEV_HOST_raMsgsDef_t; -+ -+ -+// ---------------------------------------------- -+// Begin superframe cnts definitions - DSP write. -+// ---------------------------------------------- -+ -+#define DEV_HOST_FRAMES_PER_SUPER 68 -+#define DEV_HOST_SUPERFRAMECNTDSTRM 0 -+#define DEV_HOST_SUPERFRAMECNTUSTRM 4 -+ -+// Although only the least significant 8 bits should be used as an -+// unsigned char for computing the bitswap superframe number, a -+// full 32 bit counter is provided here in order to have an -+// accurate indicator of the length of time that the modem has -+// been connected. This counter will overflow after 2.35 years -+// of connect time. -+ -+typedef struct -+{ -+ UINT32 wSuperFrameCntDstrm; -+ UINT32 wSuperFrameCntUstrm; -+} DEV_HOST_dspWrSuperFrameCntDef_t; -+ -+ -+// -------------------------------- -+// Begin ATUR/ATUC msg definitions. -+// -------------------------------- -+ -+// Grouping used by the DSP to simplify parameter passing. -+// All of these are written by the DSP. -+ -+typedef struct -+{ -+ UINT16 vendorId; // TI's vendor ID = 0x0004; Amati's vendor ID = 0x0006 -+ UINT8 versionNum; // T1.413 issue number -+ UINT8 rateAdapt; // 0 = fix rate (Default); 1= adaptive rate -+ UINT8 trellis; // 0 = disable trellis(default); 1 = enable trellis -+ UINT8 echoCancelling; // 0 = disable echo cancelling; 1 = enable echo cancelling(default) -+ UINT8 maxBits; // value range: 0-15; default = 15 -+ UINT8 maxPsd; // -+ UINT8 actualPsd; // -+ UINT8 maxIntlvDepth; // 0, 1, 2, or 3 for 64, 128, 256, or 512 max depth -+ UINT8 framingMode; // 0 for asynchronous, 1 for synchronous full overhead -+ // 2 for reduced overhead, 3 for merged reduced overhead DSP write. -+ UINT8 maxFrameMode; // maximum framing mode desired. Nor 0 or 3. -+ SINT16 targetMargin; // -+ SINT16 maxAllowedMargin; // -+ SINT16 minRequiredMargin; // -+ SINT16 maxTotBits; // -+ UINT8 grossGain; // -+ UINT8 ntr; // Enable/disable NTR support -+ SINT16 loopAttn; // Loop Attenuation -+ UINT8 vendorRevisionNumber; // Reported Vendor Revision Number -+ UINT8 reserved1; // for 32-bit alignment -+ UINT8 reserved2; // for 32-bit alignment -+ UINT8 reserved3; // for 32-bit alignment -+} DEV_HOST_msg_t; -+ -+ -+// -------------------------------------- -+// Begin bits and gains table definitions -+// -------------------------------------- -+ -+typedef struct -+{ -+ PUINT8 aturBng_p; // pointer to ATU-R bits and gains table -+ PUINT8 atucBng_p; // pointer to ATU-C bits and gains table -+ PUINT8 bitAllocTblDstrm_p; // pointer to Downstream Bit Allocation table -+ PUINT8 bitAllocTblUstrm_p; // pointer to Upstream Bit Allocation table -+ PSINT8 marginTblDstrm_p; // pointer to Downstream Margin table -+} DEV_HOST_dspWrSharedTables_t; -+ -+ -+// ---------------------------------------- -+// Begin datapump code overlay definitions. -+// ---------------------------------------- -+ -+#define DEV_HOST_PAGE_NUM 4 // number of overlay pages -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_olayDpDef_t struct -+typedef struct -+{ -+ UINT32 overlayHostAddr; // source address in host memory -+ UINT32 overlayXferCount; // number of 32bit words to be transfered -+ UINT32 overlayDspAddr; // destination address in DSP's PMEM -+} DEV_HOST_olayDpPageDef_t; -+ -+ -+typedef struct -+{ -+ UINT32 overlayStatus; // Status of current overlay to DSP PMEM -+ UINT32 overlayNumber; // DSP PMEM overlay page number -+ UINT32 overlayState; // Indicates whether current state is an overlay state -+ DEV_HOST_olayDpPageDef_t *olayDpPage_p[DEV_HOST_PAGE_NUM]; // Def's for the Pages -+} DEV_HOST_olayDpDef_t; -+ -+ -+// ------------------------- -+// Begin ATM-TC definitions. -+// ------------------------- -+ -+// TC cell states. -+typedef enum -+{ -+ TC_HUNT, -+ TC_PRESYNC, -+ TC_SYNC -+} DEV_HOST_cellDelinState_t; -+ -+ -+// -------------------------------------------- -+// Begin datapump error/statistics definitions. -+// -------------------------------------------- -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_modemStatsDef_t struct. -+typedef struct -+{ -+ UINT32 crcErrors; // Num of CRC errored ADSL frames -+ UINT32 fecErrors; // Num of FEC errored (corrected) ADSL frames -+ UINT32 ocdErrors; // Out of Cell Delineation -+ UINT32 ncdError; // No Cell Delineation -+ UINT32 lcdErrors; // Loss of Cell Delineation (within the same connection) -+ UINT32 hecErrors; // Num of HEC errored ADSL frames -+} DEV_HOST_errorStats_t; -+ -+ -+typedef struct -+{ -+ DEV_HOST_errorStats_t *usErrorStatsIntlv_p; // us error stats - interleave path -+ DEV_HOST_errorStats_t *dsErrorStatsIntlv_p; // ds error stats - interleave path -+ DEV_HOST_errorStats_t *usErrorStatsFast_p; // us error stats - fast path -+ DEV_HOST_errorStats_t *dsErrorStatsFast_p; // ds error stats - fast path -+ UINT32 losErrors; // Num of ADSL frames where loss-of-signal -+ UINT32 sefErrors; // Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames -+ UINT32 farEndLosErrors; // Number of reported LOS defects by the CO. -+ UINT32 farEndRdiErrors; // Number of reported RDI defects by the CO. -+} DEV_HOST_modemStatsDef_t; -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_atmStats_t struct. -+typedef struct -+{ -+ UINT32 goodCount; // Upstream Good Cell Count -+ UINT32 idleCount; // Upstream Idle Cell Count -+} DEV_HOST_usAtmStats_t; -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_atmStats_t struct. -+typedef struct -+{ -+ UINT32 goodCount; // Downstream Good Cell Count -+ UINT32 idleCount; // Downstream Idle Cell Count -+ UINT32 badHecCount; // Downstream Bad Hec Cell Count -+ UINT32 ovflwDropCount; // Downstream Overflow Dropped Cell Count -+ DEV_HOST_cellDelinState_t delineationState; // Indicates current delineation state -+} DEV_HOST_dsAtmStats_t; -+ -+ -+typedef struct -+{ -+ DEV_HOST_usAtmStats_t *us0_p; // US ATM stats for TC channel 0 -+ DEV_HOST_dsAtmStats_t *ds0_p; // DS ATM stats for TC channel 0 -+ DEV_HOST_usAtmStats_t *us1_p; // US ATM stats for TC channel 1 -+ DEV_HOST_dsAtmStats_t *ds1_p; // DS ATM stats for TC channel 1 -+} DEV_HOST_atmStats_t; -+ -+ -+// ---------------------- -+// Begin EOC definitions. -+// ---------------------- -+ -+// The two values below can never change (for backwards compatibility of host intf.) -+#define DEV_HOST_EOCREG4LENGTH 32 -+#define DEV_HOST_EOCREG5LENGTH 32 -+ -+typedef struct -+{ -+ UINT8 eocReg4[DEV_HOST_EOCREG4LENGTH]; // Host/Dsp Write, vendor specific EOC Register 4 -+ UINT8 eocReg5[DEV_HOST_EOCREG5LENGTH]; // Host/Dsp Write, vendor specific EOC Register 5 -+ UINT8 vendorId[8]; // Host write -+ UINT8 revNumber[4]; // Host, ATU-R Revision Number -+ UINT8 serialNumber[32]; // Host write -+ UINT8 eocReg4Length; // Host Write, valid length for EOC register 4 -+ UINT8 eocReg5Length; // Host Write, valid length for EOC register 5 -+ UINT8 dummy[2]; // dummy bytes for 32-bit alignment -+ UINT32 eocModemStatusReg; // Dsp Write, status bits to host -+ UINT8 lineAtten; // Dsp Write, line attenuation in 0.5 db step -+ SINT8 dsMargin; // DSP Write, measured DS margin -+ UINT8 aturConfig[30]; // Dsp Write, also used by EOC for ATUR Configuration -+} DEV_HOST_eocVarDef_t; -+ -+typedef struct -+{ -+ UINT16 endEocThresh; // Host Write, end of Clear EOC stream threshold -+ UINT16 dummy; // dummy value to fill gap -+ UINT32 dropEocCount; // Dsp Write, counter of dropped Clear EOC bytes -+ UINT16 eocRxLength; // Host/DSP write, number of valid Rx Clear EOC bytes -+ UINT16 eocTxLength; // Host/DSP write, number of valid Tx Clear EOC bytes -+ UINT8 eocRxBuf[64]; // Dsp Write, Buffer for receiving Rx Clear EOC bytes -+ UINT8 eocTxBuf[64]; // Host Write, Buffer for writing Tx Clear EOC bytes -+} DEV_HOST_clearEocVarDef_t; -+ -+ -+// ----------------------------------- -+// Begin CO profile Definitions. -+// ----------------------------------- -+ -+/* struct size must be a word size */ -+typedef struct -+{ -+ -+ SINT16 devCodecRxdf4Coeff[12] ; // (BOTH) IIR Coefficients -+ SINT16 devCodecTxdf2aCoeff[64] ; // (BOTH) FIR filter coefficients -+ SINT16 devCodecTxdf2bCoeff[64] ; // (BOTH) FIR filter coefficients -+ SINT16 devCodecTxdf1Coeff[12] ; // (BOTH) IIR filter coefficients -+ UINT16 devCodecTxDf2aDen; // (BOTH) denominator for IIR filter -+ UINT16 devCodecTxDf2bDen; // (BOTH) denominator for IIR filter -+ SINT16 ctrlMsmSpecGain[32]; // (BOTH) -+ -+ SINT16 phyBitaRateNegIntNoTrellis ; // (BOTH) value to set -+ SINT16 phyBitaRateNegIntTrellis ; // (BOTH) value to set -+ SINT16 phyBitaRateNegFastNoTrellis ; // (BOTH) value to set -+ SINT16 phyBitaRateNegFastTrellis ; // (BOTH) value to set -+ SINT16 phyBitaRsFlag ; // (BOTH) -+ SINT16 phyBitaFirstSubChannel ; // (BOTH) -+ SINT16 phyBitaMaxFineGainBump; // max fine gain bump -+ SINT16 phyBitaFineGainReduction; // fine gain reduction -+ SINT16 phyBitaMaxDownstreamPowerCutback; // max downstream power cutback -+ -+ SINT16 phySigTxGainReductionAt0kft; // upstream power reduction at 0 kft. -+ -+ SINT16 phyAgcPgaTarget ; // (BOTH) compare value -+ -+ UINT16 imsg413TxRate ; // (BOTH) Tx rate -+ SINT16 imsg413RsBytesAdjust ; // (BOTH) subtract value -+ UINT16 imsg413PstringMask ; // (POTS) Or'ed into pString[RMSGS1_INDEX][1] -+ SINT16 imsg413UsPilot ; // (BOTH)?? -+ UINT16 imsg413SkipPhaseOp ; // (POTS) -+ -+ UINT16 ctrlMsmSensitivity1 ; // (BOTH) value to set -+ UINT16 ctrlMsmTxPsdShape_f; // (BOTH) upstream spectral shaping flag -+ -+ UINT16 ovhdAocUsBswapReq_f ; // (BOTH)value to set -+ UINT16 ovhdAocScanMse_f ; // (BOTH)value to set -+ -+ SINT16 phyRevFullFirstBin ; // -+ SINT16 phyRevFullLastBin ; // -+ SINT16 phyRevFirstBin ; // -+ SINT16 phyRevLastBin ; // -+ SINT16 phyMedFirstBin ; // -+ SINT16 phyMedLastBin ; // -+ SINT16 phyMedOptionalLastBin; // Medley last bin - optional -+ -+ SINT16 phyEcDelayAdjustment; // Echo delay adjustment -+ SINT16 bSwapThresholdUpdate; // bSwapThresholdUpdate -+ SINT16 phyBitaFastPathExcessFineGainBump; // Used in phy_bita.c -+ SINT16 phyBitaSkipGapAdjustment; // Used in phy_bita.c -+ SINT16 usPilotInT1413ModeInMedley; // To send Upstream Pilot in medley in T1.413 mode. -+ -+ UINT32 profileVendorId ; // vendor id -+ -+} DEV_HOST_coData_t ; -+ -+typedef struct -+{ -+ DEV_HOST_coData_t * hostProfileBase_p; // base address of profile list -+} DEV_HOST_profileBase_t ; -+ -+ -+ -+// ----------------------------------- -+// Begin DSP/Host Mailbox Definitions. -+// ----------------------------------- -+ -+// The 3 values below can never be decreased, only increased. -+// If you increase one of the values, you must add more to the -+// initializers in "dev_host_interface.c". -+#define DEV_HOST_HOSTQUEUE_LENGTH 8 -+#define DEV_HOST_DSPQUEUE_LENGTH 8 -+#define DEV_HOST_TEXTQUEUE_LENGTH 8 -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_mailboxControl_t struct. -+typedef struct -+{ -+ UINT8 cmd; -+ UINT8 tag; -+ UINT8 param1; -+ UINT8 param2; -+} DEV_HOST_dspHostMsg_t; -+ -+// Never access a struct of this typedef directly. Always go through the DEV_HOST_mailboxControl_t struct. -+typedef struct -+{ -+ UINT32 msgPart1; -+ UINT32 msgPart2; -+} DEV_HOST_textMsg_t; -+ -+// The structure below has been ordered so that the Host need only write to -+// even byte locations to update the indices. -+ -+// The Buffer pointers in the struct below each point to a different -+// struct array that has an array size of one of the matching Queue Length -+// values defined above (DEV_HOST_HOSTQUEUE_LENGTH, DEV_HOST_DSPQUEUE_LENGTH, -+// and DEV_HOST_TEXTQUEUE_LENGTH). -+ -+typedef struct -+{ -+ UINT8 hostInInx; // Host write, DSP must never write except for init -+ UINT8 bDummy0[3]; // dummy bytes for explicit 32-bit alignment -+ UINT8 hostOutInx; // DSP write, Host must never write -+ UINT8 bDummy1[3]; // dummy bytes for explicit 32-bit alignment -+ UINT8 dspOutInx; // Host write, DSP must never write except for init -+ UINT8 bDummy2[3]; // dummy bytes for explicit 32-bit alignment -+ UINT8 dspInInx; // DSP write, Host must never write -+ UINT8 bDummy3[3]; // dummy bytes for explicit 32-bit alignment -+ UINT8 textInInx; // DSP write, Host must never write -+ UINT8 bDummy4[3]; // dummy bytes for explicit 32-bit alignment -+ UINT8 textOutInx; // Host write, DSP must never write except for init -+ UINT8 bDummy5[3]; // dummy bytes for explicit 32-bit alignment -+ DEV_HOST_dspHostMsg_t *hostMsgBuf_p; // pointer to Host Mailbox Buffer (Host writes the buffer) -+ DEV_HOST_dspHostMsg_t *dspMsgBuf_p; // pointer to DSP Mailbox Buffer (DSP writes the buffer) -+ DEV_HOST_textMsg_t *textMsgBuf_p; // pointer to Text Mailbox Buffer (DSP writes the buffer) -+} DEV_HOST_mailboxControl_t; -+ -+ -+//----------------------------------------- -+// Physical layer performance parameter -+//----------------------------------------- -+typedef struct -+{ -+ SINT32 hybridCost[5]; // Cost functions for hybrids (0: none, 1-4 hybrid options) -+ SINT32 usAvgGain; // upstream average gain in 20log10 (Q8) -+ SINT32 dsAvgGain; // downstream average gain in 20log10 (Q8) -+ UINT8 disableDspHybridSelect_f; // Allows host to disable the automatic hybrid selection by the DSP -+ UINT8 hostSelectHybridNum; // DSP will use this hybrid number only if DSP Select is disabled (values: 1-4) -+ UINT8 currentHybridNumUsed; // DSP indicates to the host the current hybrid number in use -+ UINT8 reserved1; // reserved for future use -+} DEV_HOST_phyPerf_t; -+ -+ -+/*********************************************************** -+ * The 3 structures below are used only for analog -+ * diagnostic functions originally defined in diag.h -+ * Moved here by Carlos A. Perez under J. Bergsagel request -+ ***********************************************************/ -+ -+/****************************************************************************/ -+/* Options for the Analog Diagnostic user input data structure */ -+/* (MUST be word aligned) */ -+/****************************************************************************/ -+typedef enum -+{ -+ ZERO_DIAG_OPT = 0, // dummy value for zero place-holder -+ NOISE_ONLY = 0x1, // diagnostic in noise only mode (on=1, off=0), disregard diagMode 0-4 -+ EXTERNAL_CO = 0x2, // operates against external CO (external=1, internal=0) -+ DIAG_AGC = 0x4, // agc selects gains control (agc=1, manual=0) -+ CROSSTALK_TEQ = 0x8, // crosstalk selects teq (crosstalk=1, manual=0) -+ LEAKY_TEQ = 0x10, // use leaky teq (on=1, off=0) -+ AUX_AMPS = 0x20, // auxamps (on=1, off=0) -+ BW_SELECT = 0x40, // change rxhpf/txlpf fc (modify=1, default=0) -+ DIAG_HYB_SELECT = 0x80, // change hybrid (modify=1, default=0) -+ POWER_DOWN_CDC = 0x100, // power down codec (power down=1, no power down=0) -+ ISDN_OP_MODE = 0x200, // operation mode (pots=0, isdn=1) -+ BYPASS_RXAF2 = 0x400, // Bypass except RXAF2 (on=1, off = 0) -+ TX_TEST_CONT = 0x800, // Continuous tx test (on=1, off=0) -+ TX_SCALE_MTT = 0x1000 // Scale tx signal for Mtt test (on=1, off=0) -+} DEV_HOST_diagAnlgOptionsVar_t; -+ -+/****************************************************************************/ -+/* Analog Diagnostic user input data structure (MUST be word align) */ -+/****************************************************************************/ -+ -+typedef struct -+{ -+ DEV_HOST_diagAnlgOptionsVar_t diagOption; // Other diagnostic optional settings -+ -+ UINT8 diagMode; // Performance diagnostic mode -+ UINT8 txMode; // transmit mode -+ UINT8 rxMode; // receive mode -+ UINT8 teqSp; // Select teq starting pt -+ UINT8 txDf1; // see dev_codec_filters.c and -+ UINT8 txDf2a; // dev_codec.h for filter coefficients -+ UINT8 txDf2b; -+ UINT8 rxDf4; -+ -+ UINT16 codingGain256Log2; // 256*Log2(coding gain) -+ UINT16 noiseMargin256Log2; // 256*Log2(noise margin) -+ -+ UINT16 rxPga1; // PGA1 -+ UINT16 rxPga2; // PGA2 -+ UINT16 rxPga3; // PGA3 -+ UINT16 anlgEq; // AEQ settings (dB/MHz) -+ -+ SINT8 pilotBin; // Select pilot subchannel -+ SINT8 txSwGain; // manual set for bridge tap loop -+ SINT8 tdw1Len; // TDW1 length - 0,2,4,8,16 -+ SINT8 tdw2Len; // TDW2 length - 0,2,4,8,16 -+ -+ UINT8 teqEcMode; // TEQ/EC mode -+ UINT8 hybrid; -+ UINT8 txAttn; // Codec Tx attenuation -+ UINT8 txGain; // Codec Tx gain (Sangam only) -+ -+ SINT16 txPda; //Codec Tx Digital gain/attn -+ UINT8 txTone[MAX_NUM_UPBINS]; // Turning tones on/off -+ // Still govern by lastbin -+ UINT16 rsvd; //for 32 bits alignment -+}DEV_HOST_diagAnlgInputVar_t; -+ -+/****************************************************************************/ -+/* Analog diagnostic output data structure */ -+/****************************************************************************/ -+typedef struct -+{ -+ PSINT32 rxSnr_p[2]; // Pointer to estimated snr -+ PSINT32 rxSubChannelCapacity_p[2]; // Pointer to estimated subchan capacity -+ PSINT32 rxSignalPower_p[2]; // Pointer to estimated signal power -+ PSINT32 rxNoisePower_p[2]; // Pointer to estimated noise power -+ PSINT32 rxAvg_p; // Pointer to average of rcvd signal -+ SINT32 chanCapacity[2] ; // Channel total capacity -+ SINT32 dataRate[2]; // Modem data rate (SNR) -+ SINT32 avgNoiseFloor; // Average noise floor -+ SINT16 snrGap256Log2; // 256*Log2(snr gap) -+ SINT16 rxPga1; // PGA1 -+ SINT16 rxPga2; // PGA2 -+ SINT16 rxPga3; // PGA3 -+ SINT16 anlgEq; // AEQ settings (dB/MHz) -+ SINT16 rsvd; -+}DEV_HOST_diagAnlgOutputVar_t; -+ -+ -+// Bit field structure that allows the host to mask off interrupt sources for possible DSP-to-Host interrupts. -+// Each bit represents a possible source of interrupts in the DSP code that might cause a DSP-to-Host -+// interrupt to occur. -+// This mask structure is not intended to show how interrupt sources in the DSP code correspond to the actual -+// DSP-to-Host interrupts. There could be multiple ways to cause an interrupt in the DSP code, but they all -+// eventually tie into one of the three possible DSP-to-Host interrupts. -+// The host should write a "1" to an individual bit when it wants to mask possible interrupts from that source. -+ -+// enum that represents individual bits in maskBitField1 -+typedef enum -+{ -+ ZERO_MASK1 = 0, // dummy value for zero place-holder -+ DSP_MSG_BUF = 0x1, // mask interrupts due to DSP-to-Host message mailbox updates -+ STATE_BIT_FIELD = 0x2, // mask interrupts due to changes in the modem state bit fields -+ DSP_HEARTBEAT = 0x4 // mask interrupts for the DSP hearbeat -+} DEV_HOST_intMask1_t; // this enum should only have 32 values in it (maximum). -+ -+// Add more "mask bit fields" at the end of this struct if you need more mask values -+typedef struct -+{ -+ DEV_HOST_intMask1_t maskBitField1; -+} DEV_HOST_hostInterruptMask_t; // this struct should only have 32 bits in it. -+ -+// Bit field structure that allows the host to determine the source(s) of DSP-to-Host interrupts in case -+// several of the interrupt sources get combined onto a single DSP-to-Host interrupt. -+// DSP will set each bit to a "1"as an interrupt occurs. -+// Host has the reponsibility to clear each bit to a "0" after it has determined the source(s) of interrupts. -+// Each source bit field in this struct will use the same enum typedef that matches the corresponding mask -+// bit field in "DEV_HOST_hostInterruptMask_t" -+typedef struct -+{ -+ DEV_HOST_intMask1_t sourceBitField1; -+} DEV_HOST_hostInterruptSource_t; -+ -+ -+// -------------------------- -+// Begin bitswap definitions. -+// -------------------------- -+ -+// bitSwapSCnt contains the superframe to perform bit swap -+// The entries must be ordered so that the first group only contains bit change commands -+// The other entries may contain power adjustment instructions and must be -+// written with something. NOP (0) is an available instruction. -+typedef struct -+{ -+ PUINT8 fineGains_p; // pointer to bng string, needed to check fine gains for powerswap -+ UINT8 bitSwapNewIndices[6]; // Bin before bitSwapBin to process -+ UINT8 bitSwapCmd[6]; // Bitswap command for bitSwapBin -+ UINT8 bitSwapBin[6]; // bin to modify -+ UINT8 bitSwapSCnt; // Superframe count on which to perform bitswap -+ UINT8 bitSwapEnabled; // bitSwapEnabled -+} DEV_HOST_dspBitSwapDef_t; -+ -+ -+// --------------------------- -+// Begin ATM BERT definitions. -+// --------------------------- -+ -+// Structure used for ATM Idle Cells based bit error rate computation. -+typedef struct -+{ -+ UINT8 atmBertFlag; // Feature enable/disable flag (Host write) -+ UINT8 dummy1; -+ UINT8 dummy[2]; // Dummy bytes for 32-bit alignment -+ UINT32 bitCountLow; // Low part of 64-bit BERT bit count (DSP write) -+ UINT32 bitCountHigh; // High part of 64-bit BERT bit count (DSP write) -+ UINT32 bitErrorCountLow; // Low part of 64-bit BERT bit count (DSP write) -+ UINT32 bitErrorCountHigh;// High part of 64-bit BERT bit count (DSP write) -+} DEV_HOST_atmDsBert_t; -+ -+ -+// ------------------------------------ -+// Misc. modem environment definitions. -+// ------------------------------------ -+ -+ -+typedef struct -+{ -+ SINT16 subStateIndex; // Index that signifies datapump substate. (DSP write) -+ UINT8 externalBert; // Turn on/off external BERT interface. 0 = OFF; 1 = ON. (Host write) -+ UINT8 usBertPattern; // BERT pattern for US TX data. 0 = 2^15-1; 1 = 2^23-1. (Host write) -+ UINT8 overrideDslLinkLed_f; // Overrides DSP operation of the DSL_LINK LED. (Host write) -+ // 0 = DSP is in control; 1 = Host is in control. -+ UINT8 dslLinkLedState_f; // DSL_LINK LED state when override flag has been set. (Host write) -+ // DSL_LINK LED will be updated with this value once per frame. -+ // LED is active-low: 0 = ON, 1 = OFF. -+ UINT8 overrideDslActLed_f; // Overrides DSP operation of the DSL_ACT LED. (Host write) -+ // 0 = DSP is in control; 1 = Host is in control. -+ UINT8 dslActLedState_f; // DSL_ACT LED state when override flag has been set. (Host write) -+ // DSL_ACT LED will be updated with this value once per frame. -+ // LED is active-low: 0 = ON, 1 = OFF. -+ UINT8 dGaspLprIndicator_f; // How LPR signal (GPIO[0]) is to be interpreted. (Host write) -+ // 0 = LPR is active-low; 1 = LPR is active-high. -+ UINT8 overrideDspLprGasp_f; // Overrides DSP detection of LPR signal to send out DGASP. (Host write) -+ // 0 = DSP detects LPR; 1 = Host detects LPR and sends "HOST_DGASP" to DSP. -+ UINT8 pcbEnabled; // DS power cut back -+ UINT8 maxAvgFineGainCtrl_f; // If maxAvgFineGainCtrl_f == 0, then the datapump controls the maximum average fine gain value. -+ // If maxAvgFineGainCtrl_f == 1, then the host controls the maximum average fine gain value. -+ UINT32 reasonForDrop; // This field will tell the host what might be the reason for a dropped connection. -+ SINT16 maxAverageFineGain; // When maxAvgFineGainCtrl_f == 1, the value in maxAverageFineGain is the maximum average fine gain level in 256log2 units. -+ UINT8 reserved1; // These are for 32-bit alignment. -+ UINT8 reserved2; // These are for 32-bit alignment. -+} DEV_HOST_modemEnvPublic_t; -+ -+ -+// ----------------------------- -+// Generic structure definition. -+// ----------------------------- -+ -+typedef struct -+{ -+ PSINT8 parameter1_p; -+ PSINT16 parameter2_p; -+ PSINT32 parameter3_p; -+ PUINT8 parameter4_p; -+ PUINT16 parameter5_p; -+ PUINT32 parameter6_p; -+} DEV_HOST_genericStructure_t; -+ -+ -+// ------------------------------ -+// Begin G.hs buffer definitions. -+// ------------------------------ -+ -+typedef struct -+{ -+ UINT8 txBuf[64]; // G.hs xmt buffer -+} DEV_HOST_ghsDspTxBufDef_t; -+ -+ -+typedef struct -+{ -+ UINT8 rxBuf[80]; // G.hs rcv buffer -+} DEV_HOST_ghsDspRxBufDef_t; -+ -+// ----------------------------------------- -+// Begin Constellation Display definitions. -+// ----------------------------------------- -+ -+typedef struct -+{ -+ UINT32 consDispStartAddr; // Host write -+ UINT32 consDispCurrentAddr; // Host write -+ UINT32 consDispBufLen; // Constellation Buffer Length -+ UINT32 consDispBin; // Host write, DS band only -+} DEV_HOST_consBufDef_t; -+ -+typedef struct -+{ -+ PSINT16 buffer1_p; //DSP write -+ PSINT16 buffer2_p; //DSP write -+} DEV_HOST_snrBuffer_t; -+ -+// -------------------------------------------------------------------------------------- -+// Typedef to be used for the DEV_HOST_dspOamSharedInterface_s struct of pointers -+// (this is used in dev_host_interface.c). -+// NOTE: This struct of pointers is NEVER to be referenced anywhere else in the DSP code. -+// IMPORTANT: Only pointers to other structs go into this struct !! -+// -------------------------------------------------------------------------------------- -+typedef struct -+{ -+ DEV_HOST_hostIntfcVersionDef_t *hostIntfcVersion_p; -+ DEV_HOST_dspVersionDef_t *datapumpVersion_p; -+ DEV_HOST_modemStateBitField_t *modemStateBitField_p; -+ DEV_HOST_dspWrNegoParaDef_t *dspWriteNegoParams_p; -+ DEV_HOST_oamWrNegoParaDef_t *oamWriteNegoParams_p; -+ DEV_HOST_raMsgsDef_t *raMsgs_p; -+ DEV_HOST_dspWrSuperFrameCntDef_t *dspWriteSuperFrameCnt_p; -+ DEV_HOST_msg_t *atucMsg_p; -+ DEV_HOST_msg_t *aturMsg_p; -+ DEV_HOST_dspWrSharedTables_t *dspWrSharedTables_p; -+ DEV_HOST_olayDpDef_t *olayDpParms_p; -+ DEV_HOST_eocVarDef_t *eocVar_p; -+ DEV_HOST_clearEocVarDef_t *clearEocVar_p; -+ DEV_HOST_modemStatsDef_t *modemStats_p; -+ DEV_HOST_atmStats_t *atmStats_p; -+ DEV_HOST_mailboxControl_t *dspHostMailboxControl_p; -+ DEV_HOST_phyPerf_t *phyPerf_p; -+ DEV_HOST_diagAnlgInputVar_t *analogInputVar_p; -+ DEV_HOST_diagAnlgOutputVar_t *analogOutputVar_p; -+ DEV_HOST_hostInterruptMask_t *hostInterruptMask_p; -+ DEV_HOST_profileBase_t *profileList_p; -+ DEV_HOST_hostInterruptSource_t *hostInterruptSource_p; -+ DEV_HOST_dspBitSwapDef_t *dspBitSwapDstrm_p; -+ DEV_HOST_dspBitSwapDef_t *dspBitSwapUstrm_p; -+ DEV_HOST_atmDsBert_t *atmDsBert_p; -+ DEV_HOST_modemEnvPublic_t *modemEnvPublic_p; -+ DEV_HOST_genericStructure_t *genericStructure1_p; -+ DEV_HOST_genericStructure_t *genericStructure2_p; -+ DEV_HOST_ghsDspTxBufDef_t *ghsDspTxBuf_p; -+ DEV_HOST_ghsDspRxBufDef_t *ghsDspRxBuf_p; -+ DEV_HOST_consBufDef_t *consDispVar_p; -+ DEV_HOST_snrBuffer_t *snrBuffer_p; -+} DEV_HOST_dspOamSharedInterface_t; -+ -+ -+// --------------------------------------------------------------------------------- -+// Typedef to be used for the pointer to the DEV_HOST_dspOamSharedInterface_s struct -+// of pointers (this is used in dev_host_interface.c). -+// --------------------------------------------------------------------------------- -+typedef DEV_HOST_dspOamSharedInterface_t *DEV_HOST_dspOamSharedInterfacePtr_t; -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/dev_host_verdef.h linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h ---- linux.old/drivers/atm/sangam_atm/dev_host_verdef.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dev_host_verdef.h 2005-08-23 04:46:50.091844608 +0200 -@@ -0,0 +1,102 @@ -+#ifndef __DEV_HOST_VERDEF_H__ -+#define __DEV_HOST_VERDEF_H__ 1 -+ -+//******************************************************************** -+//* -+//* DMT-BASE ADSL MODEM PROGRAM -+//* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION -+//* AMATI CONFIDENTIAL PROPRIETARY -+//* -+//* (c) Copyright April 1999, Texas Instruments Incorporated. -+//* All Rights Reserved. -+//* -+//* Property of Texas Instruments Incorporated and Amati Communications Corp. -+//* -+//* Restricted Rights - Use, duplication, or disclosure is subject to -+//* restrictions set forth in TI's and Amati program license agreement and -+//* associated documentation -+//* -+//********************************************************************* -+//* -+//* FILENAME: dev_host_verdef.h -+//* -+//* ABSTRACT: This file defines the version structure -+//* -+//* TARGET: Non specific. -+//* -+//* TOOLSET: Non specific. -+//* -+//* ACTIVATION: -+//* -+//* HISTORY: DATE AUTHOR DESCRIPTION -+//* 04/29/99 FLW Created -+//* 01/17/00 Barnett Mod's in support of merging NIC -+//* hardware rev 6/7 T1.413 codebases. -+//* 01/21/00 Wagner derfmake mods -+//* 05/11/00 Barnett hardware_rev is a 2 char string. -+//* 07/24/00 Barnett Rework as part of host interface redesign. -+//* 11/29/00 Hunt added chipset_id2 -+//* 03/30/01 Barnett Prefixed all public elements with DSPDP_. -+//* This insures uniqueness of names that might -+//* match host names by coincidence. -+//* 03/30/01 Barnett Added DSPDP_Host_VersionDef to facilitate -+//* representing a version id for the host i/f -+//* separate from the firmware version id as -+//* a courtesy to the host. -+//* 07/23/01 JEB Changed name from verdef_u.h to dpsys_verdef.h -+//* 04/12/02 Barnett Make timestamp unsigned 32-bit field. -+//* Generalizes for all kinds of hosts. -+//* 11/15/02 JEB Changed name from dpsys_verdef.h to dev_host_verdef.h -+//* Updated structs according to coding guidelines -+//* 12/16/02 JEB Renamed some struct elements for new usage in Ax7 -+//* 01/21/03 MCB Implemented Ax7 UNIT-MODULE modular software framework. -+//* 03/19/03 JEB Added back in "bugFix" elements into each struct type. -+//* Rearranged elements. -+//* -+//******************************************************************** -+ -+#include "env_def_typedefs.h" -+ -+#define DSPDP_FLAVOR_NEWCODES 0xFF // Other values are valid old-style flavors -+ -+// ------------------------------ -+// ------------------------------ -+// Begin DSP version definitions. -+// ------------------------------ -+// ------------------------------ -+ -+typedef struct -+{ -+ UINT32 timestamp; // Number of seconds since 01/01/1970 -+ UINT8 major; // Major "00".00.00.00 revision nomenclature -+ UINT8 minor; // Minor 00."00".00.00 revision nomenclature -+ UINT8 bugFix; // Bug Fix 00.00."00".00 revision nomenclature -+ UINT8 buildNum; // Build Number 00.00.00."00" revision nomenclature -+ UINT8 netService; // Network service identifier -+ UINT8 chipsetGen; // chipset generation -+ UINT8 chipsetId; // chipset identifier -+ UINT8 chipsetId2; // second byte for "RV" chipset et al. -+ UINT8 hardwareRev1; // hardware revision, 1st char -+ UINT8 hardwareRev2; // hardware revision, 2nd char -+ UINT8 featureCode; // feature code -+ UINT8 dummy1; // dummy byte for explicit 32-bit alignment -+} DEV_HOST_dspVersionDef_t; -+ -+// ------------------------------- -+// ------------------------------- -+// Begin host version definitions. -+// ------------------------------- -+// ------------------------------- -+ -+typedef struct -+{ -+ UINT8 major; // Major "00".00.00.00 revision nomenclature -+ UINT8 minor; // Minor 00."00".00.00 revision nomenclature -+ UINT8 bugFix; // Bug Fix 00.00."00".00 revision nomenclature -+ UINT8 buildNum; // Build Number 00.00.00."00" revision nomenclature -+ UINT8 netService; // Network service identifier -+ UINT8 dummy[3]; // dummy bytes for explicit 32-bit alignment -+} DEV_HOST_hostIntfcVersionDef_t; -+ -+ -+#endif // __DEV_HOST_VERDEF_H__ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.c linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c ---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.c 2005-08-23 04:46:50.095844000 +0200 -@@ -0,0 +1,3339 @@ -+/******************************************************************************* -+* FILE PURPOSE: DSL Driver API functions for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_hal_basicapi.c -+* -+* DESCRIPTION: -+* Contains basic DSL HAL APIs for Sangam -+* -+* -+* (C) Copyright 2001-02, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 06Feb03 0.00.00 RamP Original Version Created -+* 10Mar03 0.00.01 RamP Initial Revision for Modular Code Branch -+* 19Mar03 0.00.02 RamP Fixed DSL and DSP Version API Structures -+* 20Mar03 0.00.03 RamP Changed byteswap function names -+* 21Mar03 0.00.03 RamP/ZT Malloc for DSP f/w done in dslStartup -+* 25Mar03 0.00.04 RamP Removed statistics used only by SWTC -+* Created Checkpoint 3 -+* 26Mar03 0.00.05 RamP Added Memory allocation for fwimage in -+* dslStartup function. -+* 07Apr03 0.00.06 RamP Implemented new error reporting scheme -+* Changed Commenting to C style only -+* 09Apr03 0.00.07 RamP Reorganized code to delete POST_SILICON -+* 10Apr03 0.00.08 RamP Removed ptidsl from loadFWImage function -+* moved size and fwimage initialization to -+* dslStartup function -+* 14Apr03 0.00.09 RamP Moved modemStateBitField processing to a -+* support function; deleted stateHistory -+* renamed the REG32 macro -+* 15Apr03 0.00.10 RamP Changed firmware allocate to shim_ -+* osAllocateVMemory function -+* 15Apr03 0.00.11 RamP Changed host version number to 07.00.00.01 -+* 16Apr03 0.00.12 RamP Modified return condition on dslShutdown -+* 16Apr03 0.00.13 RamP Changed host version number to 07.00.00.02 -+* 21Apr03 0.01.00 RamP Cleaned up dslShutdown function -+* Added new function calls to allocate -+* (Alpha) /free overlay pages for different OS -+* Fixed typecasting for allocate/free fxns -+* Added Interrupt Acknowledge logic -+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt into api -+* Added static global for intr source -+* 24Apr03 0.01.02 RamP Added processing for OVERLAY_END in -+* DSP message handlers, verified crc32 -+* recovery for overlays -+* 28Apr03 0.01.03 RamP Removed global variable intrSource -+* Added parameter to handleInterrupt fxn -+* (Alpha Plus) to indicate interrupt source -+* Changed version number to 01.00.01.00 -+* Fixed setTrainingMode function problem -+* 07May03 0.01.04 RamP Removed delineation state check in -+* message handling functions, added more -+* safety for setting lConnected in TC_SYNC -+* Changed version number to 01.00.01.01 -+* 14May03 0.01.05 RamP Added 3 Switchable Hybrid APIs -+* Added additional statistics us/ds TxPower, -+* us margin,attenuation, us/ds bitallocation -+* moved versioning to dsl_hal_version.h -+* 14May03 0.01.06 RamP Fixed problem with CMsgs2 parsing -+* 20May03 0.01.07 RamP Added Inner/Outer pair API support. Added -+* dying gasp message. -+* 29May03 0.01.08 ZT/RamP Added memory optimizations for overlay pages -+* and coProfiles; added functions to free, -+* reload overlays and profiles -+* 04Jun03 0.01.09 RamP Added tick counters, fail states reporting -+* Made statistics fixes for higher data rates -+* Added Margin per tone to statistics -+* Added configuration checks for trellis/FEC -+* 06Jun03 0.01.10 RamP Added LED, STM Bert, dGasp LPR Config APIs -+* Modified interrupt acknowledge logic -+* Added current hybrid flag as statistic -+* 09Jun03 0.01.11 RamP Added function to send dying Gasp to Modem -+* fixed problem with reading OamNegoPara var -+* (Beta) fixed problem with reading current config -+* Added function to configure ATM Bert -+* fixed memory leak due to coProfiles -+* Added us/ds R/S FEC statistics -+* Added additional config capability for LED -+* fixed problem in free memory for CO profiles -+* 18Jul03 0.01.12 RamP Fixed problem with reading modemEnv structure -+* affects LED, DGaspLpr APIs -+* Sending Dying Gasp from shutdown function -+* 01Aug03 0.01.13 RamP Added preferred training mode to statistics -+* 13Aug03 0.01.14 MCB Set rev id for D3/R1.1 (ADSL2). -+* 21Aug03 0.01.15 RamP Added g.hs and aoc bitswap message gathering -+* Added new references to bits n gains table -+* Decoupled modem idle/retrain from pair select -+* Added line length and gross gain to statistics -+* 29Sep03 0.01.16 RamP Replaced advcfg function calls with support -+* module function switches -+* 01Oct03 0.01.17 RamP Added enum translation to set training mode -+* & to read statistics -+* 08Oct03 0.01.18 RamP Fixed problems with usTxPower statistic in -+* Annex B target, fixed problem with Trellis -+* 12Oct03 0.01.19 RamP Added API calls to gather ADSL2 Messages -+* 29Oct03 0.01.20 RamP Restored TC_SYNC detect logic -+* 30Oct03 0.01.21 RamP Removed Scaling factor for adsl2DSConRate -+* Setting Showtime state upon DSP_ACTIVE -+* 14Nov03 0.01.22 RamP Fixed scaling for usTxPower & dsTxPower -+* 14Nov03 0.01.23 RamP Added logic to gather CRates1/RRates1 -+* by parsing DSP_CRATES1 -+* 20Nov03 0.01.24 RamP Added generic & interface Read -+* and Write functions to read from -+* DSP - Host Interface -+* 24Nov03 0.01.25 RamP Modified interface Read/Write functions -+* to seperate element offsets from pointers -+* 19Dec03 0.01.26 RamP Modified pointer accessing problems with -+* block read functions -+* 26Dec03 0.01.27 RamP Made ghsIndex a local variable & added -+* check to avoid buffer overflow -+* 30Dec03 0.01.28 RamP Added generic mailbox command function -+*******************************************************************************/ -+#include "dsl_hal_register.h" -+#include "dsl_hal_support.h" -+#include "dsl_hal_logtable.h" -+#include "dsl_hal_version.h" -+ -+static unsigned int hybrid_selected; -+static unsigned int showtimeFlag = FALSE; -+ -+#ifdef PRE_SILICON -+/*********************************************/ -+/* Base Addresses */ -+/*********************************************/ -+#define DEV_MDMA_BASE 0x02000500 -+ -+/*********************************************/ -+/* MC DMA Control Registers in DSL */ -+/*********************************************/ -+ -+#define DEV_MDMA0_SRC_ADDR (DEV_MDMA_BASE + 0x00000000) -+#define DEV_MDMA0_DST_ADDR (DEV_MDMA_BASE + 0x00000004) -+#define DEV_MDMA0_CTL_ADDR (DEV_MDMA_BASE + 0x00000008) -+#define DEV_MDMA1_SRC_ADDR (DEV_MDMA_BASE + 0x00000040) -+#define DEV_MDMA1_DST_ADDR (DEV_MDMA_BASE + 0x00000044) -+#define DEV_MDMA1_CTL_ADDR (DEV_MDMA_BASE + 0x00000048) -+#define DEV_MDMA2_SRC_ADDR (DEV_MDMA_BASE + 0x00000080) -+#define DEV_MDMA2_DST_ADDR (DEV_MDMA_BASE + 0x00000084) -+#define DEV_MDMA2_CTL_ADDR (DEV_MDMA_BASE + 0x00000088) -+#define DEV_MDMA3_SRC_ADDR (DEV_MDMA_BASE + 0x000000C0) -+#define DEV_MDMA3_DST_ADDR (DEV_MDMA_BASE + 0x000000C4) -+#define DEV_MDMA3_CTL_ADDR (DEV_MDMA_BASE + 0x000000C8) -+ -+#define DEV_MDMA0_SRC (*((volatile UINT32 *) DEV_MDMA0_SRC_ADDR)) -+#define DEV_MDMA0_DST (*((volatile UINT32 *) DEV_MDMA0_DST_ADDR)) -+#define DEV_MDMA0_CTL (*((volatile UINT32 *) DEV_MDMA0_CTL_ADDR)) -+#define DEV_MDMA1_SRC (*((volatile UINT32 *) DEV_MDMA1_SRC_ADDR)) -+#define DEV_MDMA1_DST (*((volatile UINT32 *) DEV_MDMA1_DST_ADDR)) -+#define DEV_MDMA1_CTL (*((volatile UINT32 *) DEV_MDMA1_CTL_ADDR)) -+#define DEV_MDMA2_SRC (*((volatile UINT32 *) DEV_MDMA2_SRC_ADDR)) -+#define DEV_MDMA2_DST (*((volatile UINT32 *) DEV_MDMA2_DST_ADDR)) -+#define DEV_MDMA2_CTL (*((volatile UINT32 *) DEV_MDMA2_CTL_ADDR)) -+#define DEV_MDMA3_SRC (*((volatile UINT32 *) DEV_MDMA3_SRC_ADDR)) -+#define DEV_MDMA3_DST (*((volatile UINT32 *) DEV_MDMA3_DST_ADDR)) -+#define DEV_MDMA3_CTL (*((volatile UINT32 *) DEV_MDMA3_CTL_ADDR)) -+ -+/* MDMA control bits */ -+ -+#define DEV_MDMA_START 0x80000000 -+#define DEV_MDMA_STOP 0x00000000 -+#define DEV_MDMA_STATUS 0x40000000 -+#define DEV_MDMA_DST_INC 0x00000000 -+#define DEV_MDMA_DST_FIX 0x02000000 -+#define DEV_MDMA_SRC_INC 0x00000000 -+#define DEV_MDMA_SRC_FIX 0x00800000 -+#define DEV_MDMA_BURST1 0x00000000 -+#define DEV_MDMA_BURST2 0x00100000 -+#define DEV_MDMA_BURST4 0x00200000 -+ -+#define DEV_MDMA_LEN_SHF 2 -+#define DEV_MDMA_LEN_MASK 0x0000FFFF -+ -+#define DMA0 0 -+#define DMA1 1 -+#define DMA2 2 -+#define DMA3 3 -+#endif -+#ifdef DMA -+SINT32 getDmaStatus(UINT32 mask) -+{ -+ if(!(IFR & mask)) -+ { -+ return DSLHAL_ERROR_NO_ERRORS; -+ } -+ else -+ { -+ ICR = mask ; -+ return 1 ; -+ } -+} -+ -+void programMdma(UINT32 dma, UINT32 source, UINT32 destination, UINT32 length, UINT32 wait) -+{ -+ volatile UINT32 statusMask ; -+ -+ switch(dma) -+ { -+ case DMA0: -+ { -+ DEV_MDMA0_SRC = source ; -+ DEV_MDMA0_DST = destination ; -+ DEV_MDMA0_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC | -+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ; -+ statusMask = 0x00000010 ; -+ } -+ break ; -+ case DMA1: -+ { -+ DEV_MDMA1_SRC = source ; -+ DEV_MDMA1_DST = destination ; -+ DEV_MDMA1_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC | -+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ; -+ statusMask = 0x00000020 ; -+ } -+ break ; -+ case DMA2: -+ { -+ DEV_MDMA2_SRC = source ; -+ DEV_MDMA2_DST = destination ; -+ DEV_MDMA2_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC | -+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ; -+ statusMask = 0x00000040 ; -+ } -+ break ; -+ case DMA3: -+ { -+ DEV_MDMA3_SRC = source ; -+ DEV_MDMA3_DST = destination ; -+ DEV_MDMA3_CTL = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC | -+ DEV_MDMA_BURST1 | (length << DEV_MDMA_LEN_SHF)) ; -+ statusMask = 0x00000080 ; -+ } -+ break ; -+ -+ } -+ -+ if(wait) -+ { -+ while(!(getDmaStatus(statusMask))) ; -+ } -+ -+} -+#endif -+ -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_dslStartup -+* -+******************************************************************************************* -+* DESCRIPTION: Entry point to initialize and load ax5 daughter board -+* -+* INPUT: PITIDSLHW_T *ppIHw -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_api_dslStartup(PITIDSLHW_T *ppIHw) -+{ -+ -+ ITIDSLHW_T *ptidsl; -+ int i; -+ int rc; -+ dprintf(4,"dslhal_api_dslStartup() NEW 1\n"); -+ -+ ptidsl=(ITIDSLHW_T *)shim_osAllocateMemory(sizeof(ITIDSLHW_T)); -+ if(ptidsl==NULL) -+ { -+ dprintf(1, "unable to allocate memory for ptidsl\n"); -+ return 1; -+ } -+ *ppIHw=ptidsl; -+ shim_osZeroMemory((char *) ptidsl, sizeof(ITIDSLHW_T)); -+ -+ /* Unreset the ADSL Subsystem */ -+ rc=dslhal_support_unresetDslSubsystem(); -+ if(rc) -+ { -+ dprintf(1, "unable to reset ADSL Subsystem \n"); -+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T)); -+ return DSLHAL_ERROR_UNRESET_ADSLSS; -+ } -+ ptidsl->fwimage = shim_osAllocateVMemory(DSP_FIRMWARE_MALLOC_SIZE); -+ if(!ptidsl->fwimage) -+ { -+ dprintf(1,"Failed to Allocate Memory for DSP firmware binary \n"); -+ return DSLHAL_ERROR_FIRMWARE_MALLOC; -+ } -+ /* read firmware file from flash */ -+ rc=shim_osLoadFWImage(ptidsl->fwimage); -+ if(rc<0) -+ { -+ dprintf(1, "unable to get fw image\n"); -+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE); -+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T)); -+ return DSLHAL_ERROR_NO_FIRMWARE_IMAGE; -+ } -+ else -+ { -+ ptidsl->imagesize = rc; -+ } -+ /* Compute the CRC checksum on the image and validate the image */ -+ -+ /* Validate the image in the RAM */ -+ -+ /* load fw to DSP */ -+ -+ if(dslhal_support_hostDspCodeDownload(ptidsl)) -+ { -+ dprintf(0,"dsp load error\n"); -+ for(i=0; i<NUM_PAGES; i++) -+ { -+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL) -+ { -+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, -+ ptidsl->olayDpPage[i].OverlayXferCount); -+ } -+ } -+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount); -+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount); -+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE); -+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T)); -+ return DSLHAL_ERROR_CODE_DOWNLOAD; -+ } -+ -+ /* set flag to indicated overlay pages are loaded */ -+ ptidsl->bOverlayPageLoaded = 1; -+ /* set auto retrain to 1 to disble the overlay page reload */ -+ ptidsl->bAutoRetrain = 1; -+ -+ /* unreset Raptor */ -+ /* change this to new function */ -+ /* This function should basically bring DSP out of reset bit 23 of PRCR */ -+ /* Function is ready but bypassed for Pre-Silicon */ -+ -+ rc=dslhal_support_unresetDsp(); -+ if (rc) -+ { -+ dprintf(0,"unable to bring DSP out of Reset\n"); -+ for(i=0; i<NUM_PAGES; i++) -+ { -+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL) -+ { -+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, -+ ptidsl->olayDpPage[i].OverlayXferCount); -+ } -+ } -+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount); -+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount); -+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE); -+ shim_osFreeMemory((void *) ptidsl, sizeof(ITIDSLHW_T)); -+ return DSLHAL_ERROR_UNRESET_DSP; -+ } -+ shim_osFreeVMemory((void *)ptidsl->fwimage,DSP_FIRMWARE_MALLOC_SIZE); -+ dprintf(4,"dslhal_api_dslStartup() done\n"); -+ -+ /* Add the code to initialize the host interface variables */ -+ /* Add code to tickle the host interface */ -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_dslShutdown -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: routine to shutdown ax5 modem and free the resource -+ * -+ * INPUT: tidsl_t *ptidsl -+ * -+ * RETURN: NULL -+ * -+ * -+ *****************************************************************************************/ -+ -+int dslhal_api_dslShutdown(tidsl_t *ptidsl) -+{ -+ int rc= DSLHAL_ERROR_NO_ERRORS; -+ int i; -+ -+ dprintf(5, "dslhal_api_dslShutdown\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DSLSS_SHUTDOWN, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1, " unable to reset DSP \n"); -+ rc = DSLHAL_ERROR_RESET_DSP; -+ } -+ /* DSP need 50 ms to send out the message*/ -+ -+ shim_osClockWait(60 * 1000); -+ -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0); -+ -+ /* free memory allocated*/ -+ -+ for(i=0; i<NUM_PAGES; i++) -+ { -+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL) -+ { -+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, -+ ptidsl->olayDpPage[i].OverlayXferCount); -+ } -+ } -+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount); -+ if(ptidsl->constDisplay.PmemStartWtAddr != NULL) -+ shim_osFreeDmaMemory((void *)ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.OverlayXferCount); -+ shim_osFreeMemory((void *)ptidsl, sizeof(tidsl_t)); -+ rc = dslhal_support_resetDsp(); -+ if(rc) -+ { -+ dprintf(1, " unable to reset ADSL subsystem \n"); -+ rc = DSLHAL_ERROR_RESET_DSP; -+ } -+ rc = dslhal_support_resetDslSubsystem(); -+ if(rc) -+ { -+ dprintf(1, " unable to reset ADSL subsystem \n"); -+ rc = DSLHAL_ERROR_RESET_ADSLSS; -+ } -+return rc; -+} -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_getDslHalVersion -+* -+******************************************************************************************* -+* DESCRIPTION: This routine supply DSL Driver version. -+* -+* INPUT: tidsl_t * ptidsl -+* void *pVer, DSP Driver Version Pointer -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* Note: See verdef_u.h for version structure definition. -+*****************************************************************************************/ -+ -+void dslhal_api_getDslHalVersion(void *pVer) -+{ -+ dslVer *pVersion; -+ pVersion = (dslVer *)pVer; -+ pVersion->major = (unsigned char) DSLHAL_VERSION_MAJOR; -+ pVersion->minor = (unsigned char) DSLHAL_VERSION_MINOR; -+ pVersion->bugfix = (unsigned char) DSLHAL_VERSION_BUGFIX; -+ pVersion->buildNum = (unsigned char) DSLHAL_VERSION_BUILDNUM; -+ pVersion->timeStamp = (unsigned char) DSLHAL_VERSION_TIMESTAMP; -+} -+ -+/******************************************************************************************** -+ * FUNCTION NAME: dslhal_api_pollTrainingStatus() -+ * -+ ********************************************************************************************* -+ * DESCRIPTION: code to decode modem status and to start modem training -+ * Input: tidsl_t *ptidsl -+ * -+ * Return: modem status -+ * -1 failed -+ * -+ ********************************************************************************************/ -+ -+int dslhal_api_pollTrainingStatus(tidsl_t *ptidsl) -+{ -+ int cmd; -+ int tag; -+ int parm1,parm2; -+ int rc; -+ unsigned int failState; -+ static unsigned int pollGhsIndex=0; -+ -+ /*char *tmp;*/ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+#if SWTC -+ DEV_HOST_tcHostCommDef_t TCHostCommDef; -+#endif -+ -+ dprintf(5,"dslhal_api_pollTrainingStatus\n"); -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+#if SWTC -+ dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, -+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+#endif -+ -+ rc = dslhal_support_processTrainingState(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Modem Training State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ rc = dslhal_support_processModemStateBitField(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Modem Training State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ /* -+ rc = dslhal_support_readDelineationState(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Delineation State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ */ -+ while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS ) -+ { -+ dprintf(4,"mailbox message: 0x%x\n", cmd); -+ /* -+ for(rc=0;rc<8;rc++) -+ { -+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2); -+ } -+ */ -+ -+ if (cmd == DSP_IDLE) -+ { -+ dprintf(4,"DSP_IDLE\n"); -+ ptidsl->lConnected=0; -+ hybrid_selected=888; -+ /* add code for reload overlay pages */ -+ if(ptidsl->bAutoRetrain == 0) -+ { -+ while(ptidsl->bOverlayPageLoaded == 0) -+ { -+ shim_osClockWait(6400); -+ } -+ //dslhal_support_restoreTrainingInfo(ptidsl); -+ //ptidsl->bOverlayPageLoaded = 1; -+ } -+ /* command DSP to ACTREQ */ -+ if(showtimeFlag == TRUE) -+ { -+ dslhal_api_resetTrainFailureLog(ptidsl); -+ dslhal_support_advancedIdleProcessing(ptidsl); -+ showtimeFlag = FALSE; -+ } -+ failState = (unsigned int)parm1; -+ if(failState!=0) -+ { -+ ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState; -+ ptidsl->AppData.trainFails++; -+ if(ptidsl->AppData.trainFails > 30) -+ ptidsl->AppData.trainFails=0; -+ } -+ for(pollGhsIndex=0;pollGhsIndex<10;pollGhsIndex++) -+ { -+ for(rc=0;rc<62;rc++) -+ ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex][rc]=0; -+ } -+ pollGhsIndex=0; -+ rc = dslhal_support_writeHostMailbox(ptidsl,HOST_ACTREQ, 0, 0, 0); -+ if (rc) -+ return DSLHAL_ERROR_MAILBOX_WRITE; -+ } -+ -+ if(cmd == DSP_ATM_TC_SYNC) -+ { -+ dprintf(4,"\nTC_SYNC\n"); -+ showtimeFlag = TRUE; -+ ptidsl->lConnected=1; -+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1) -+ { -+ dslhal_support_clearTrainingInfo(ptidsl); -+ ptidsl->bOverlayPageLoaded = 0; -+ } -+ } -+ if(cmd == DSP_ACTIVE) -+ { -+ dprintf(4,"DSP_ACTIVE"); -+ ptidsl->lConnected=0; -+ ptidsl->AppData.bState = RSTATE_SHOWTIME; -+ dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate); -+ dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate); -+ } -+ if(cmd == DSP_ATM_NO_TC_SYNC) -+ { -+ dprintf(4,"\nTC_NOSYNC\n"); -+ ptidsl->lConnected=0; -+ } -+ if(cmd == DSP_DGASP) -+ { -+ dprintf(0,"\n GASP!!! \n"); -+ } -+ if(cmd == DSP_OVERLAY_END) -+ { -+ dprintf(4,"Overlay Page Done %d \n",tag); -+ rc = dslhal_support_checkOverlayPage(ptidsl,tag); -+ if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED) -+ { -+ dprintf(0,"Overlay Page: %d CORRUPTED \n",tag); -+ return (0-DSLHAL_ERROR_OVERLAY_CORRUPTED); -+ } -+ } -+ if(cmd == DSP_HYBRID) -+ { -+ dprintf(2,"Hybrid Metrics Available: %d\n",tag); -+ hybrid_selected = tag; -+ } -+ if(cmd == DSP_DGASP) -+ { -+ dprintf(0,"\n GASP!!! \n"); -+ } -+ if(cmd == DSP_XMITBITSWAP) -+ { -+ dslhal_support_aocBitSwapProcessing(ptidsl,0); -+ } -+ if(cmd == DSP_RCVBITSWAP) -+ { -+ dslhal_support_aocBitSwapProcessing(ptidsl,1); -+ } -+ if(cmd == DSP_GHSMSG) -+ { -+ dprintf(3,"Ghs Message Received, bytes: %d \n",tag); -+ dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p); -+ if(pollGhsIndex > 9) -+ pollGhsIndex=0; -+ rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[pollGhsIndex++][0], tag); -+ } -+ if(cmd == DSP_CRATES1) -+ { -+ dprintf(3,"DSP C-Rates1 Data Ready \n"); -+ rc = dslhal_support_gatherRateMessages(ptidsl); -+ } -+ if(cmd == DSP_SNR) -+ { -+ dprintf(3,"DSP SNR Data Ready \n"); -+ rc = dslhal_support_gatherSnrPerBin(ptidsl,tag); -+ } -+ if(cmd == DSP_EOC) -+ { -+ dprintf(3,"DSP_EOC message \n"); -+ rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2); -+ } -+ -+ if(cmd == DSP_TRAINING_MSGS) -+ { -+ dprintf(3,"DSP_TRAINING_MSGS \n"); -+ rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2); -+ } -+ } -+ dprintf(6,"dslhal_api_pollTrainingStatus done\n"); -+ return(ptidsl->AppData.bState); -+ -+} /* end of dslhal_api_pollTrainingStatus() */ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt() -+* -+********************************************************************************************* -+* DESCRIPTION: Code to handle ax5 hardware interrupts -+* -+* Input: tidsl_t *ptidsl -+* int *pMsg, pointer to returned hardware messages. Each byte represent a messge -+* int *pTag, pointer to returned hardware message tags. Each byte represent a tag. -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+int dslhal_api_handleTrainingInterrupt(tidsl_t *ptidsl, int intrSource) -+{ -+ int cmd; -+ int tag; -+ int parm1,parm2; -+ unsigned int msg1; -+ unsigned int msg2; -+ int rc; -+ unsigned int failState; -+ static unsigned int interruptGhsIndex=0; -+ /*char *tmp;*/ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+#if SWTC -+ DEV_HOST_tcHostCommDef_t TCHostCommDef; -+#endif -+ dprintf(6,"dslhal_api_handleTrainingInterrupt\n"); -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+#if SWTC -+ dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, -+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+#endif -+ -+ if(intrSource & MASK_BITFIELD_INTERRUPTS) -+ { -+ dspOamSharedInterface.modemStateBitField_p =(DEV_HOST_modemStateBitField_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStateBitField_p); -+ rc = dslhal_support_processTrainingState(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Modem Training State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ rc = dslhal_support_processModemStateBitField(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Modem Training State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ } -+ if(intrSource & MASK_MAILBOX_INTERRUPTS) -+ { -+ /* -+ rc = dslhal_support_readDelineationState(ptidsl); -+ if(rc) -+ { -+ dprintf(0,"Error Reading Delineation State \n"); -+ return DSLHAL_ERROR_MODEMSTATE; -+ } -+ */ -+ while (dslhal_support_readDspMailbox(ptidsl,&cmd, &tag, &parm1, &parm2) == DSLHAL_ERROR_NO_ERRORS ) -+ { -+ dprintf(4,"mailbox message: 0x%x\n", cmd); -+ /* -+ for(rc=0;rc<8;rc++) -+ { -+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2); -+ } -+ */ -+ if (cmd == DSP_IDLE) -+ { -+ dprintf(4,"DSP_IDLE\n"); -+ ptidsl->lConnected=0; -+ hybrid_selected=888; -+ if(showtimeFlag == TRUE) -+ { -+ dslhal_api_resetTrainFailureLog(ptidsl); -+ dslhal_support_advancedIdleProcessing(ptidsl); -+ showtimeFlag = FALSE; -+ } -+ failState = (unsigned int)parm1; -+ if(failState!=0) -+ { -+ ptidsl->AppData.trainFailStates[ptidsl->AppData.trainFails]=failState; -+ ptidsl->AppData.trainFails++; -+ if(ptidsl->AppData.trainFails > 30) -+ ptidsl->AppData.trainFails=0; -+ } -+ for(interruptGhsIndex=0;interruptGhsIndex<10;interruptGhsIndex++) -+ { -+ for(rc=0;rc<62;rc++) -+ ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex][rc]=0; -+ } -+ interruptGhsIndex=0; -+ -+ /* add code for reload overlay pages */ -+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 0) -+ { -+ dslhal_support_restoreTrainingInfo(ptidsl); -+ ptidsl->bOverlayPageLoaded = 1; -+ } -+ /* command DSP to ACTREQ */ -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_ACTREQ, 0, 0, 0); -+ if (rc) -+ return DSLHAL_ERROR_MAILBOX_WRITE; -+ } -+ if(cmd == DSP_ATM_TC_SYNC) -+ { -+ dprintf(4,"\nTC_SYNC\n"); -+ showtimeFlag = TRUE; -+ ptidsl->lConnected=1; -+ if(ptidsl->bAutoRetrain == 0 && ptidsl->bOverlayPageLoaded == 1) -+ { -+ dslhal_support_clearTrainingInfo(ptidsl); -+ ptidsl->bOverlayPageLoaded = 0; -+ } -+ } -+ if(cmd == DSP_ACTIVE) -+ { -+ ptidsl->lConnected=0; -+ ptidsl->AppData.bState = RSTATE_SHOWTIME; -+ dprintf(4,"DSP_ACTIVE"); -+ dprintf(4,"US Connect Rate: %u \n",ptidsl->AppData.USConRate); -+ dprintf(4,"DS Connect Rate: %u \n",ptidsl->AppData.DSConRate); -+ } -+ if(cmd == DSP_ATM_NO_TC_SYNC) -+ { -+ dprintf(4,"\nTC_NOSYNC\n"); -+ ptidsl->lConnected=0; -+ /* add code for reload overlay pages */ -+ } -+ if(cmd == DSP_OVERLAY_END) -+ { -+ dprintf(4,"Overlay Page Done %d \n",tag); -+ rc = dslhal_support_checkOverlayPage(ptidsl,tag); -+ if(rc == DSLHAL_ERROR_OVERLAY_CORRUPTED) -+ { -+ dprintf(4,"Overlay Page: %d CORRUPTED \n",tag); -+ return(0-DSLHAL_ERROR_OVERLAY_CORRUPTED); -+ } -+ } -+ if(cmd == DSP_HYBRID) -+ { -+ dprintf(2,"Hybrid Metrics Available\n"); -+ hybrid_selected = tag; -+ } -+ if(cmd == DSP_XMITBITSWAP) -+ { -+ rc = dslhal_support_aocBitSwapProcessing(ptidsl,0); -+ } -+ if(cmd == DSP_RCVBITSWAP) -+ { -+ rc = dslhal_support_aocBitSwapProcessing(ptidsl,1); -+ } -+ if(cmd == DSP_GHSMSG) -+ { -+ dprintf(3,"Ghs Message Received, bytes: %d \n",tag); -+ dprintf(3,"Addr: 0x%x\n",dspOamSharedInterface.ghsDspRxBuf_p); -+ if(interruptGhsIndex > 9) -+ interruptGhsIndex=0; -+ rc = dslhal_support_blockRead((void *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.ghsDspRxBuf_p), &ptidsl->AppData.dsl_ghsRxBuf[interruptGhsIndex++][0], tag); -+ } -+ if(cmd == DSP_CRATES1) -+ { -+ dprintf(3,"DSP C-Rates1 Data Ready \n"); -+ rc = dslhal_support_gatherRateMessages(ptidsl); -+ } -+ if(cmd == DSP_SNR) -+ { -+ dprintf(3,"DSP SNR Data Ready \n"); -+ rc = dslhal_support_gatherSnrPerBin(ptidsl,tag); -+ } -+ if(cmd == DSP_EOC) -+ { -+ dprintf(3,"DSP_EOC message \n"); -+ rc = dslhal_support_gatherEocMessages(ptidsl,tag,parm1,parm2); -+ } -+ if(cmd == DSP_TRAINING_MSGS) -+ { -+ dprintf(3,"DSP_TRAINING_MSGS \n"); -+ rc = dslhal_support_gatherAdsl2Messages(ptidsl,tag,parm1,parm2); -+ } -+ } -+ -+ dslhal_support_readTextMailbox(ptidsl,&msg1, &msg2); -+ dprintf(5,"Text Message Part1: 0x%x \t Text Message Part2: 0x%x \n",msg1,msg2); -+ } -+ dprintf(6,"dslhal_api_handleTrainingInterrupt done\n"); -+ return(ptidsl->AppData.bState); -+} /* end of dslhal_api_handleTrainingInterrupt() */ -+ -+ -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_dslRetrain(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends CMD_ACTREQ to the DSP to issue a retrain -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_dslRetrain(tidsl_t *ptidsl) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_cfg_dslRetrain \n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_cfg_dslRetrain failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendQuiet(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendQuiet(tidsl_t *ptidsl) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_api_sendQuiet\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_QUIET, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_api_sendQuiet failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendIdle(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendIdle(tidsl_t *ptidsl) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_api_sendIdle\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_IDLE, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_api_sendIdle failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendDgasp(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendDgasp(tidsl_t *ptidsl) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_api_sendDgasp\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_DGASP, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_api_sendDgasp failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Desired Training Mode {None/Multimode/G.dmt/lite -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode -+* 2: T1.413, 3:G.dmt, 4: G.lite -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode) -+{ -+ DEV_HOST_oamWrNegoParaDef_t NegoPara; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setTrainingMode()\n"); -+ if(trainmode>255) -+ { -+ dprintf(3,"Invalid Value for Desired Training Mode (must be <255)\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ /* Enum Translation to maintain backwards compatibility for train modes */ -+ if(trainmode == DSLTRAIN_MULTI_MODE) -+ trainmode = MULTI_MODE; -+ if(trainmode == DSLTRAIN_T1413_MODE) -+ trainmode = T1413_MODE; -+ if(trainmode == DSLTRAIN_GDMT_MODE) -+ trainmode = GDMT_MODE; -+ -+ NegoPara.stdMode = trainmode; -+ dprintf(5,"Train Mode: 0x%x\n",trainmode); -+ rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ -+ dprintf(5," dslhal_api_setTrainingMode() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_getDspVersion -+* -+******************************************************************************************* -+* DESCRIPTION: This routine supply AX5 daugther card DSP version. -+* -+* INPUT: tidsl_t * ptidsl -+* void *pVer, DSP version struct is returned starting at this pointer -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* Note: See verdef_u.h for version structure definition. -+*****************************************************************************************/ -+int dslhal_api_getDspVersion(tidsl_t *ptidsl, void *pVer) -+{ -+ /* DEV_HOST_dspVersionDef_t dspVersion; */ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5, "dslhal_api_getDspVersion\n"); -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ if(!pVer) -+ return DSLHAL_ERROR_INVALID_PARAM; -+ -+ *(unsigned int *) pVer = 0; -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p, -+ pVer, sizeof(dspVer)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ pVer = (DEV_HOST_dspVersionDef_t *)(dslhal_support_byteSwap32((unsigned int)pVer)); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_gatherStatistics() -+* -+********************************************************************************************* -+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. -+* Input: tidsl_t *ptidsl -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+void dslhal_api_gatherStatistics(tidsl_t * ptidsl) -+{ -+ int rc,optIdxU,optIdxD,i; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_dspWrNegoParaDef_t rateparms; -+ DEV_HOST_oamWrNegoParaDef_t configParms; -+ DEV_HOST_modemStatsDef_t StatisticsDef; -+ DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError; -+ DEV_HOST_atmStats_t atmStats; -+ DEV_HOST_usAtmStats_t usAtmStats0, usAtmStats1; -+ DEV_HOST_dsAtmStats_t dsAtmStats0,dsAtmStats1; -+ DEV_HOST_dspWrSuperFrameCntDef_t SuperFrameCnt; -+ DEV_HOST_msg_t atuc_msg, aturMsg; -+ DEV_HOST_eocVarDef_t eocVar; -+ DEV_HOST_dspWrSharedTables_t sharedTables; -+ DEV_HOST_phyPerf_t phyPerf; -+ unsigned char usBits[64],dsBits[256]; -+ unsigned char dsPowerCutBack; -+ int usNumLoadedTones=0, dsNumLoadedTones=0; -+ -+ dprintf(5, "dslhal_api_gatherStatistics\n"); -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ if(!ptidsl->bStatisticsInitialized && ptidsl->lConnected == LINE_CONNECTED) -+ { -+ dslhal_api_initStatistics(ptidsl); -+ ptidsl->bStatisticsInitialized = TRUE; -+ } -+ -+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, -+ &rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ if(!rc) -+ { -+ /* trained mode */ -+ ptidsl->AppData.dsl_modulation = (unsigned int)rateparms.trainMode; -+ if(rateparms.trainMode == T1413_MODE) -+ ptidsl->AppData.dsl_modulation = DSLTRAIN_T1413_MODE; -+ if(rateparms.trainMode == GDMT_MODE) -+ ptidsl->AppData.dsl_modulation = DSLTRAIN_GDMT_MODE; -+ /* rate */ -+ /* shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, 120); */ -+ ptidsl->AppData.bCRates2 = rateparms.cRates2; -+ /* shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */ -+ ptidsl->AppData.bRRates2 = rateparms.rRates2; -+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6); -+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4); -+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4); -+ ptidsl->AppData.atucVendorId = (unsigned int)rateparms.atucVendorId; -+ ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength); -+ ptidsl->AppData.atucRevisionNum = (unsigned int)rateparms.atucGhsRevisionNum; -+ ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f; -+ ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f; -+ -+ if((rateparms.cRates2 & 0x0f) == 0x01) -+ optIdxU = 0; -+ else if((rateparms.cRates2 & 0x0f) == 0x02) -+ optIdxU = 1; -+ else if((rateparms.cRates2 & 0x0f) == 0x04) -+ optIdxU = 2; -+ else if((rateparms.cRates2 & 0x0f) == 0x08) -+ optIdxU = 3; -+ else -+ optIdxU = -1; -+ -+ dprintf(5, "optIdxU=%d\n", optIdxU); -+ -+ /* Obtain the US Rates using Opt# and CRates1 Table */ -+ /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32 */ -+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE) -+ ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32); -+ else -+ ptidsl->AppData.USConRate = 32 * dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate); -+ -+ ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; -+ -+ if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) -+ optIdxD = 0; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02) -+ optIdxD = 1; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) -+ optIdxD = 2; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08) -+ optIdxD = 3; -+ else -+ optIdxD = -1; -+ /* Obtain the DS Rates using Opt# and CRates1 Table */ -+ /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32 */ -+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE) -+ ptidsl->AppData.DSConRate = (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32); -+ else -+ ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate); -+ -+ dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate); -+ /* Determine which Path has Modem Trained with */ -+ if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0])) -+ ptidsl->AppData.TrainedPath = FAST_PATH; -+ else -+ ptidsl->AppData.TrainedPath = INTERLEAVED_PATH; -+ -+ /* Set the mode in which the modem is trained */ -+ ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode; -+ if(rateparms.trainMode == T1413_MODE) -+ ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE; -+ if(rateparms.trainMode == GDMT_MODE) -+ ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE; -+ -+ if(ptidsl->AppData.TrainedPath == FAST_PATH) -+ ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f); -+ else -+ ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f); -+ ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f); -+ ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2)); -+ -+ if(ptidsl->AppData.TrainedPath == FAST_PATH) -+ ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f); -+ else -+ ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f); -+ ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f); -+ ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2)); -+ } -+ -+ dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ /* Populate the Error Structure Variables */ -+ -+ /* US Interleave Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* DS Interleave Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* US Fast Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* DS Fast Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ if(!rc) -+ { -+ if(ptidsl->AppData.bState > 2) -+ { -+ /* Get CRC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsICRC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors); -+ ptidsl->AppData.dsFCRC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors); -+ ptidsl->AppData.usICRC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors); -+ ptidsl->AppData.usFCRC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors); -+ /* Get FEC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsIFEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors); -+ ptidsl->AppData.dsFFEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors); -+ ptidsl->AppData.usIFEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors); -+ ptidsl->AppData.usFFEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors); -+ /* Get NCD Errors Stats for both US and DS */ -+ ptidsl->AppData.dsINCD_error = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError); -+ ptidsl->AppData.dsFNCD_error = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError); -+ ptidsl->AppData.usINCD_error = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError); -+ ptidsl->AppData.usFNCD_error = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError); -+ /* Get LCD Errors Stats for both US and DS */ -+ ptidsl->AppData.dsILCD_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors); -+ ptidsl->AppData.dsFLCD_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors); -+ ptidsl->AppData.usILCD_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors); -+ ptidsl->AppData.usFLCD_errors = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors); -+ /*Get HEC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsIHEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors); -+ ptidsl->AppData.dsFHEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors); -+ ptidsl->AppData.usIHEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors); -+ ptidsl->AppData.usFHEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors); -+ -+ /* Get LOS and SEF error Stats */ -+ ptidsl->AppData.LOS_errors = dslhal_support_byteSwap32(StatisticsDef.losErrors); -+ ptidsl->AppData.SEF_errors = dslhal_support_byteSwap32(StatisticsDef.sefErrors); -+ ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors); -+ ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors); -+ -+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ /* Populate the US/DS ATM Stats Variables */ -+ -+ /* US ATM Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* DS ATM Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t))); -+ -+ if (rc) -+ return; -+ atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* Get ATM Stats for both US and DS for Channel 0*/ -+ ptidsl->AppData.usAtm_count[0] = dslhal_support_byteSwap32(usAtmStats0.goodCount); -+ ptidsl->AppData.usIdle_count[0] = dslhal_support_byteSwap32(usAtmStats0.idleCount); -+#if SWTC -+ ptidsl->AppData.usPdu_count[0] = dslhal_support_byteSwap32(usAtmStats0.pduCount); -+#endif -+ ptidsl->AppData.dsGood_count[0] = dslhal_support_byteSwap32(dsAtmStats0.goodCount); -+ ptidsl->AppData.dsIdle_count[0] = dslhal_support_byteSwap32(dsAtmStats0.idleCount); -+#if SWTC -+ ptidsl->AppData.dsPdu_count[0] = dslhal_support_byteSwap32(dsAtmStats0.pduCount); -+#endif -+ ptidsl->AppData.dsBadHec_count[0] = dslhal_support_byteSwap32((dsAtmStats0.badHecCount)); -+ ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount)); -+ /* Get ATM Stats for both US and DS for Channel 1*/ -+ ptidsl->AppData.usAtm_count[1] = dslhal_support_byteSwap32(usAtmStats1.goodCount); -+ ptidsl->AppData.usIdle_count[1] = dslhal_support_byteSwap32(usAtmStats1.idleCount); -+#if SWTC -+ ptidsl->AppData.usPdu_count[1] = dslhal_support_byteSwap32(usAtmStats1.pduCount); -+#endif -+ ptidsl->AppData.dsGood_count[1] = dslhal_support_byteSwap32(dsAtmStats1.goodCount); -+ ptidsl->AppData.dsIdle_count[1] = dslhal_support_byteSwap32(dsAtmStats1.idleCount); -+#if SWTC -+ ptidsl->AppData.dsPdu_count[1] = dslhal_support_byteSwap32(dsAtmStats1.pduCount); -+#endif -+ ptidsl->AppData.dsBadHec_count[1] = dslhal_support_byteSwap32((dsAtmStats1.badHecCount)); -+ ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount)); -+ -+ /* Determine the US and DS Superframe Count */ -+ -+ dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ ptidsl->AppData.usSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm); -+ ptidsl->AppData.dsSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm); -+ -+ /* Determine Frame Mode and Max Frame Mode */ -+ -+ dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ ptidsl->AppData.FrmMode = (unsigned int)atuc_msg.framingMode; -+ ptidsl->AppData.MaxFrmMode = (unsigned int)atuc_msg.maxFrameMode; -+ -+ /* Determine Gross Gain */ -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain; -+ -+ /* Determine DS Line Attenuation & Margin */ -+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ ptidsl->AppData.dsLineAttn = (unsigned int)eocVar.lineAtten; -+ ptidsl->AppData.dsMargin = (unsigned int)eocVar.dsMargin; -+ } -+ } -+ -+ /* Read in the Shared Tables structure */ -+ dspOamSharedInterface.dspWrSharedTables_p = (DEV_HOST_dspWrSharedTables_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWrSharedTables_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWrSharedTables_p,&sharedTables, sizeof(DEV_HOST_dspWrSharedTables_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ /* Read the ATU-R Bits and Gains Table */ -+ sharedTables.aturBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.aturBng_p); -+ rc = dslhal_support_blockRead((PVOID)sharedTables.aturBng_p,ptidsl->AppData.rBng,255*2*sizeof(unsigned char)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ /* Read the ATU-C Bits and Gains Table */ -+ sharedTables.atucBng_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.atucBng_p); -+ if(ptidsl->netService == 2) /* for Annex_B */ -+ { -+ rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,126*sizeof(unsigned char)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ for(i=0;i<US_BNG_LENGTH*2;i++) -+ usBits[i]=0; -+ for(i=1;i<US_BNG_LENGTH*2;i++) -+ { -+ usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf); -+ dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]); -+ } -+ for(i=1;i<US_BNG_LENGTH*2;i++) -+ { -+ if(usBits[i]) -+ usNumLoadedTones++; -+ } -+ } -+ else -+ { -+ rc = dslhal_support_blockRead((PVOID)sharedTables.atucBng_p,ptidsl->AppData.cBng,62*sizeof(unsigned char)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ for(i=0;i<US_BNG_LENGTH;i++) -+ usBits[i]=0; -+ for(i=1;i<US_BNG_LENGTH;i++) -+ { -+ usBits[i]=((ptidsl->AppData.cBng[(i-1)*2])&0xf); -+ dprintf(5,"Bit #%d : 0x%x\n",i,usBits[i]); -+ } -+ for(i=1;i<US_BNG_LENGTH;i++) -+ { -+ if(usBits[i]) -+ usNumLoadedTones++; -+ } -+ } -+ -+ /* Determine Number U/S of Loaded Tones */ -+ -+ /* U/S Power Computation */ -+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p, -+ &phyPerf, sizeof(DEV_HOST_phyPerf_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ ptidsl->AppData.currentHybridNum = phyPerf.currentHybridNumUsed; -+ phyPerf.usAvgGain = dslhal_support_byteSwap32(phyPerf.usAvgGain); -+ ptidsl->AppData.usTxPower = LOG43125 + phyPerf.usAvgGain + (256*US_NOMINAL_POWER)+log10[usNumLoadedTones-1]; -+ dprintf(7,"Avg Gain: 0x%x usNumLoadedTones: 0x%x log: 0x%x\n",phyPerf.usAvgGain, usNumLoadedTones, log10[usNumLoadedTones-1]); -+ -+ /* Determine Number D/S of Loaded Tones */ -+ dsBits[0]=0; -+ for(i=0;i<DS_BNG_LENGTH;i++) -+ { -+ dsBits[i]=0; -+ /* ptidsl->AppData.rBng[i-1]=dslhal_support_byteSwap32((unsigned int)ptidsl->AppData.rBng[i-1]);*/ -+ } -+ for(i=1;i<DS_BNG_LENGTH;i++) -+ { -+ dsBits[i]=((ptidsl->AppData.rBng[(i-1)*2])&0xf); -+ dprintf(5,"Bit #%d : 0x%x\n",i,dsBits[i]); -+ } -+ for(i=1;i<DS_BNG_LENGTH;i++) -+ { -+ if(dsBits[i]) -+ dsNumLoadedTones++; -+ } -+ /* D/S Power Computation */ -+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p, -+ &phyPerf, sizeof(DEV_HOST_phyPerf_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ /* D/S Power Cutback */ -+ dsPowerCutBack = (unsigned char)((((ptidsl->AppData.bCMsgs1[0]) >>6) &0x3)+(((ptidsl->AppData.bCMsgs1[1]) &0x1) <<2)); -+ phyPerf.dsAvgGain = dslhal_support_byteSwap32(phyPerf.dsAvgGain); -+ ptidsl->AppData.dsTxPower = LOG43125 + phyPerf.dsAvgGain + (256*((2*(dsPowerCutBack-1))-52)) + log10[dsNumLoadedTones-1]; -+ dprintf(7,"Avg Gain: %d dsNumLoadedTones: %d log: %d pcb: %d \n",phyPerf.dsAvgGain, dsNumLoadedTones, log10[dsNumLoadedTones-1], dsPowerCutBack); -+ /* ds bit allocation */ -+ sharedTables.bitAllocTblDstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblDstrm_p); -+ rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblDstrm_p,ptidsl->AppData.BitAllocTblDstrm, 256*sizeof(unsigned char)); -+ if(rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed \n"); -+ return; -+ } -+ -+ /* us bit allocation */ -+ sharedTables.bitAllocTblUstrm_p = (unsigned char *)dslhal_support_byteSwap32((unsigned int)sharedTables.bitAllocTblUstrm_p); -+ rc = dslhal_support_blockRead((PVOID)sharedTables.bitAllocTblUstrm_p,ptidsl->AppData.BitAllocTblUstrm, 32*sizeof(unsigned char)); -+ if(rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed \n"); -+ return; -+ } -+ /* margin per tone */ -+ sharedTables.marginTblDstrm_p = (signed char *)dslhal_support_byteSwap32((unsigned int)sharedTables.marginTblDstrm_p); -+ rc = dslhal_support_blockRead((PVOID)sharedTables.marginTblDstrm_p,ptidsl->AppData.marginTblDstrm, 256*sizeof(signed char)); -+ if(rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed \n"); -+ return; -+ } -+ /* Read Configured Options */ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, -+ &configParms, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ else -+ { -+ /* r-Msg1 */ -+ ptidsl->AppData.StdMode = (unsigned int)configParms.stdMode; -+ if(configParms.stdMode == T1413_MODE) -+ ptidsl->AppData.StdMode = DSLTRAIN_T1413_MODE; -+ if(configParms.stdMode == GDMT_MODE) -+ ptidsl->AppData.StdMode = DSLTRAIN_GDMT_MODE; -+ if(configParms.stdMode == MULTI_MODE) -+ ptidsl->AppData.StdMode = DSLTRAIN_MULTI_MODE; -+ -+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs1, (void *)configParms.rMsgs1, 6*sizeof(char)); -+ if((ptidsl->AppData.bRMsgs1[2] & 0x02) == 0x02) -+ { -+ dprintf(7,"Trellis!\n"); -+ ptidsl->configFlag |= CONFIG_FLAG_TRELLIS; -+ } -+ else -+ ptidsl->configFlag &= ~CONFIG_FLAG_TRELLIS; -+ if(ptidsl->AppData.bRMsgs1[2]&0x01) -+ ptidsl->configFlag |= CONFIG_FLAG_EC; -+ else -+ ptidsl->configFlag &= ~CONFIG_FLAG_EC; -+ } -+ return; -+} -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_initStatistics() -+* -+********************************************************************************************* -+* DESCRIPTION: init statistical information of ax5 modem daugter card. -+* -+* Input: tidsl_t *ptidsl -+* -+* Return: NULL -+* -+********************************************************************************************/ -+void dslhal_api_initStatistics(tidsl_t * ptidsl) -+{ -+ int rc; -+ /*TCHostCommDef TCHostCommParms; */ -+ int optIdxU, optIdxD; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_dspWrNegoParaDef_t rateparms; -+ DEV_HOST_modemStatsDef_t StatisticsDef; -+ DEV_HOST_errorStats_t usIntlvError, usFastError, dsIntlvError, dsFastError; -+ DEV_HOST_atmStats_t atmStats; -+ DEV_HOST_usAtmStats_t usAtmStats0, usAtmStats1; -+ DEV_HOST_dsAtmStats_t dsAtmStats0,dsAtmStats1; -+ DEV_HOST_dspWrSuperFrameCntDef_t SuperFrameCnt; -+ DEV_HOST_msg_t atuc_msg, aturMsg; -+ DEV_HOST_eocVarDef_t eocVar; -+ -+ dprintf(5, "dslhal_api_initStatistics\n"); -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p,&rateparms, sizeof(DEV_HOST_dspWrNegoParaDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ if(!rc) -+ { -+ /* shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)rateparms.cRates1, SIZE_OF_CRATES1_TABLE); */ -+ ptidsl->AppData.bCRates2 = rateparms.cRates2; -+ /* shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)rateparms.rRates1, 44); */ -+ ptidsl->AppData.bRRates2 = rateparms.rRates2; -+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs1, (void *)rateparms.cMsgs1, 6); -+ shim_osMoveMemory((void *)ptidsl->AppData.bCMsgs2, (void *)rateparms.cMsgs2, 4); -+ shim_osMoveMemory((void *)ptidsl->AppData.bRMsgs2, (void *)rateparms.rMsgs2, 4); -+ -+ ptidsl->AppData.atucVendorId = dslhal_support_byteSwap32((unsigned int)rateparms.atucVendorId); -+ ptidsl->AppData.lineLength = (unsigned int)dslhal_support_byteSwap16((unsigned short)rateparms.lineLength); -+ ptidsl->AppData.atucRevisionNum = rateparms.atucGhsRevisionNum; -+ ptidsl->AppData.usLineAttn = (ptidsl->AppData.bCMsgs2[3] >>2)&0x003f; -+ ptidsl->AppData.usMargin = (ptidsl->AppData.bCMsgs2[2])&0x001f; -+ -+ /* Get the UpStream Connection Rate */ -+ /* Based on the Bit Pattern Get the Opt# */ -+ if((rateparms.cRates2 & 0x0f) == 0x01) -+ optIdxU = 0; -+ else if((rateparms.cRates2 & 0x0f) == 0x02) -+ optIdxU = 1; -+ else if((rateparms.cRates2 & 0x0f) == 0x04) -+ optIdxU = 2; -+ else if((rateparms.cRates2 & 0x0f) == 0x08) -+ optIdxU = 3; -+ else -+ optIdxU = -1; -+ dprintf(5, "optIdxU=%d\n", optIdxU); -+ /* Obtain the US Rates using Opt# and CRates1 Table */ -+ /* Rate(US) = [Bf(LS0) + Bi(LS0)]*32 */ -+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE) -+ ptidsl->AppData.USConRate = ((rateparms.cRates1[optIdxU][CRATES1_BF_LS0] + rateparms.cRates1[optIdxU][CRATES1_BI_LS0]) * 32); -+ else -+ ptidsl->AppData.USConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2USRate); -+ ptidsl->AppData.USPeakCellRate = ptidsl->AppData.USConRate; -+ -+ /* Get the DownStream Connection Rate */ -+ /* Based on the Bit Pattern Get the Opt# */ -+ if(((rateparms.cRates2 >> 4) & 0x0f) == 0x01) -+ optIdxD = 0; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x02) -+ optIdxD = 1; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x04) -+ optIdxD = 2; -+ else if(((rateparms.cRates2 >> 4) & 0x0f) == 0x08) -+ optIdxD = 3; -+ else -+ optIdxD = -1; -+ /* Obtain the DS Rates using Opt# and CRates1 Table */ -+ /* Rate(DS) = [Bf(AS0) + Bi(AS0)]*32 */ -+ if(ptidsl->AppData.dsl_modulation <= DSLTRAIN_GLITE_MODE) -+ ptidsl->AppData.DSConRate = (((rateparms.cRates1[optIdxD][CRATES1_BF_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BF_DSRS]&0x80)<<1))+ (rateparms.cRates1[optIdxD][CRATES1_BI_AS0]|((rateparms.cRates1[optIdxD][CRATES1_BI_DSRS]&0x80)<<1)))* 32); -+ else -+ ptidsl->AppData.DSConRate = dslhal_support_byteSwap16((unsigned short)rateparms.adsl2DSRate); -+ dprintf(5, "ptidsl->AppData.wDSConRate=%d\n", ptidsl->AppData.DSConRate); -+ /* Determine which Path has Modem Trained with */ -+ if((rateparms.cRates1[optIdxU][CRATES1_BF_LS0]) && (rateparms.cRates1[optIdxD][CRATES1_BF_AS0])) -+ ptidsl->AppData.TrainedPath = FAST_PATH; -+ else -+ ptidsl->AppData.TrainedPath = INTERLEAVED_PATH; -+ -+ /* Set the mode in which the modem is trained */ -+ ptidsl->AppData.TrainedMode = (unsigned int)rateparms.trainMode; -+ if(rateparms.trainMode == T1413_MODE) -+ ptidsl->AppData.TrainedMode = DSLTRAIN_T1413_MODE; -+ if(rateparms.trainMode == GDMT_MODE) -+ ptidsl->AppData.TrainedMode = DSLTRAIN_GDMT_MODE; -+ -+ if(ptidsl->AppData.TrainedPath == FAST_PATH) -+ ptidsl->AppData.dsFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_DSRS]&0x1f); -+ else -+ ptidsl->AppData.dsIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_DSRS]&0x1f); -+ ptidsl->AppData.dsSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0x1f); -+ ptidsl->AppData.dsInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_DSI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_DSS]&0xc0)<<2)); -+ -+ if(ptidsl->AppData.TrainedPath == FAST_PATH) -+ ptidsl->AppData.usFastParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BF_USRS]&0x1f); -+ else -+ ptidsl->AppData.usIntlvParityBytesPerSymbol = (rateparms.cRates1[optIdxU][CRATES1_BI_USRS]&0x1f); -+ ptidsl->AppData.usSymbolsPerCodeWord = (rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0x1f); -+ ptidsl->AppData.usInterleaverDepth = ((rateparms.cRates1[optIdxU][CRATES1_BFI_USI])|((rateparms.cRates1[optIdxU][CRATES1_BFI_USS]&0xc0)<<2)); -+ } -+ -+ /* get the Statistics itself */ -+ -+ dspOamSharedInterface.modemStats_p = (DEV_HOST_modemStatsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemStats_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemStats_p,&StatisticsDef, sizeof(DEV_HOST_modemStatsDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ /* Populate the Error Structure Variables */ -+ -+ /* US Interleave Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.usErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsIntlv_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsIntlv_p,&usIntlvError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* DS Interleave Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.dsErrorStatsIntlv_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsIntlv_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsIntlv_p,&dsIntlvError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* US Fast Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.usErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.usErrorStatsFast_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.usErrorStatsFast_p,&usFastError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ -+ /* DS Fast Path Error Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ StatisticsDef.dsErrorStatsFast_p = (DEV_HOST_errorStats_t *) dslhal_support_byteSwap32((unsigned int)StatisticsDef.dsErrorStatsFast_p); -+ -+ rc = dslhal_support_blockRead((PVOID)StatisticsDef.dsErrorStatsFast_p,&dsFastError, (sizeof(DEV_HOST_errorStats_t))); -+ -+ if (rc) -+ return; -+ -+ if(ptidsl->AppData.bState > 2) -+ { -+ /* Get CRC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsICRC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.crcErrors); -+ ptidsl->AppData.dsFCRC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.crcErrors); -+ ptidsl->AppData.usICRC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.crcErrors); -+ ptidsl->AppData.usFCRC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.crcErrors); -+ /* Get FEC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsIFEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.fecErrors); -+ ptidsl->AppData.dsFFEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.fecErrors); -+ ptidsl->AppData.usIFEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.fecErrors); -+ ptidsl->AppData.usFFEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.fecErrors); -+ /* Get NCD Errors Stats for both US and DS */ -+ ptidsl->AppData.dsINCD_error = dslhal_support_byteSwap32((unsigned int)dsIntlvError.ncdError); -+ ptidsl->AppData.dsFNCD_error = dslhal_support_byteSwap32((unsigned int)dsFastError.ncdError); -+ ptidsl->AppData.usINCD_error = dslhal_support_byteSwap32((unsigned int)usIntlvError.ncdError); -+ ptidsl->AppData.usFNCD_error = dslhal_support_byteSwap32((unsigned int)usFastError.ncdError); -+ /* Get LCD Errors Stats for both US and DS */ -+ ptidsl->AppData.dsILCD_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.lcdErrors); -+ ptidsl->AppData.dsFLCD_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.lcdErrors); -+ ptidsl->AppData.usILCD_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.lcdErrors); -+ ptidsl->AppData.usFLCD_errors = dslhal_support_byteSwap32((unsigned int)usFastError.lcdErrors); -+ /*Get HEC Errors Stats for both US and DS */ -+ ptidsl->AppData.dsIHEC_errors = dslhal_support_byteSwap32((unsigned int)dsIntlvError.hecErrors); -+ ptidsl->AppData.dsFHEC_errors = dslhal_support_byteSwap32((unsigned int)dsFastError.hecErrors); -+ ptidsl->AppData.usIHEC_errors = dslhal_support_byteSwap32((unsigned int)usIntlvError.hecErrors); -+ ptidsl->AppData.usFHEC_errors = dslhal_support_byteSwap32((unsigned int)usFastError.hecErrors); -+ -+ /* Get LOS and SEF error Stats */ -+ ptidsl->AppData.LOS_errors = dslhal_support_byteSwap32(StatisticsDef.losErrors); -+ ptidsl->AppData.SEF_errors = dslhal_support_byteSwap32(StatisticsDef.sefErrors); -+ ptidsl->AppData.coLosErrors = dslhal_support_byteSwap32(StatisticsDef.farEndLosErrors); -+ ptidsl->AppData.coRdiErrors = dslhal_support_byteSwap32(StatisticsDef.farEndRdiErrors); -+ -+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ /* Populate the US/DS ATM Stats Variables */ -+ -+ /* US ATM Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.us0_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us0_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.us0_p,&usAtmStats0, (sizeof(DEV_HOST_usAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.us1_p = (DEV_HOST_usAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.us1_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.us1_p,&usAtmStats1, (sizeof(DEV_HOST_usAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ -+ /* DS ATM Statistics */ -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t))); -+ -+ if (rc) -+ return; -+ -+ /* Change the endianness of the Pointer */ -+ atmStats.ds1_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds1_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.ds1_p,&dsAtmStats1, (sizeof(DEV_HOST_dsAtmStats_t))); -+ -+ if (rc) -+ return; -+ /* Get ATM Stats for both US and DS Channel 0*/ -+ ptidsl->AppData.usAtm_count[0] = dslhal_support_byteSwap32(usAtmStats0.goodCount); -+ ptidsl->AppData.usIdle_count[0] = dslhal_support_byteSwap32(usAtmStats0.idleCount); -+#if SWTC -+ ptidsl->AppData.usPdu_count[0] = dslhal_support_byteSwap32(usAtmStats0.pduCount); -+#endif -+ ptidsl->AppData.dsGood_count[0] = dslhal_support_byteSwap32(dsAtmStats0.goodCount); -+ ptidsl->AppData.dsIdle_count[0] = dslhal_support_byteSwap32(dsAtmStats0.idleCount); -+#if SWTC -+ ptidsl->AppData.dsPdu_count[0] = dslhal_support_byteSwap32(dsAtmStats0.pduCount); -+#endif -+ ptidsl->AppData.dsBadHec_count[0] = dslhal_support_byteSwap32((dsAtmStats0.badHecCount)); -+ ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount)); -+ -+ /* Get ATM Stats for both US and DS Channel 1*/ -+ ptidsl->AppData.usAtm_count[1] = dslhal_support_byteSwap32(usAtmStats1.goodCount); -+ ptidsl->AppData.usIdle_count[1] = dslhal_support_byteSwap32(usAtmStats1.idleCount); -+#if SWTC -+ ptidsl->AppData.usPdu_count[1] = dslhal_support_byteSwap32(usAtmStats1.pduCount); -+#endif -+ ptidsl->AppData.dsGood_count[1] = dslhal_support_byteSwap32(dsAtmStats1.goodCount); -+ ptidsl->AppData.dsIdle_count[1] = dslhal_support_byteSwap32(dsAtmStats1.idleCount); -+#if SWTC -+ ptidsl->AppData.dsPdu_count[1] = dslhal_support_byteSwap32(dsAtmStats1.pduCount); -+#endif -+ ptidsl->AppData.dsBadHec_count[1] = dslhal_support_byteSwap32((dsAtmStats1.badHecCount)); -+ ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount)); -+ -+ -+ /* Determine the US and DS Superframe Count */ -+ -+ dspOamSharedInterface.dspWriteSuperFrameCnt_p = (DEV_HOST_dspWrSuperFrameCntDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteSuperFrameCnt_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteSuperFrameCnt_p,&SuperFrameCnt, sizeof(DEV_HOST_dspWrSuperFrameCntDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ ptidsl->AppData.usSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntUstrm); -+ ptidsl->AppData.dsSuperFrmCnt = dslhal_support_byteSwap32(SuperFrameCnt.wSuperFrameCntDstrm); -+ -+ /* Determine Frame Mode and Max Frame Mode */ -+ -+ dspOamSharedInterface.atucMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atucMsg_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atucMsg_p,&atuc_msg, sizeof(DEV_HOST_msg_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ ptidsl->AppData.FrmMode = (unsigned int)atuc_msg.framingMode; -+ ptidsl->AppData.MaxFrmMode = (unsigned int)atuc_msg.maxFrameMode; -+ -+ /* Determine Gross Gain */ -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ ptidsl->AppData.grossGain = (unsigned int)aturMsg.grossGain; -+ /* Determine DS Line Attenuation & Margin */ -+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p,&eocVar, sizeof(DEV_HOST_eocVarDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return; -+ } -+ -+ ptidsl->AppData.dsLineAttn = (unsigned int)eocVar.lineAtten; -+ ptidsl->AppData.dsMargin = (unsigned int)eocVar.dsMargin; -+ } -+ -+#if __HOST_FORINTERNALUSEONLY_R_H__ -+ ptidsl->AppData.BER = dslhal_INTERNAL_computeAtmBitErrorRate(ptidsl); -+#endif -+ dprintf(5, "initstatistics done\n"); -+ return; -+ } -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction enables/disables all the LOS alarms -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int set; //if set is TRUE: LOS Alarms are disabled else enabled -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * NOTES: Currently not supported in any version other than MR4 Patch release.. -+ *****************************************************************************************/ -+unsigned int dslhal_api_disableLosAlarm(tidsl_t *ptidsl,unsigned int set) -+{ -+ DEV_HOST_oamWrNegoParaDef_t NegoPara; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setTrainingMode()\n"); -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(set) -+ { -+ NegoPara.disableLosAlarm = TRUE; -+ /* NegoPara.marginMonitorTrning = TRUE; -+ NegoPara.marginMonitorShwtme = TRUE;*/ -+ } -+ else -+ { -+ NegoPara.disableLosAlarm = FALSE; -+ /* NegoPara.marginMonitorTrning = FALSE; -+ NegoPara.marginMonitorShwtme = FALSE;*/ -+ } -+ -+ rc = dslhal_support_blockWrite(&NegoPara,(PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ dprintf(5," dslhal_api_disableLosAlarm() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setMarginThreshold(tidsl_t *ptidsl,int threshold) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction does sets the Margin threshold -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * int threshold -+ * -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold) -+{ -+ DEV_HOST_oamWrNegoParaDef_t NegoPara; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ -+ dprintf(5," dslhal_ctrl_setThreshold()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ -+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ NegoPara.marginThreshold = threshold; -+ -+ rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ -+ if(rc) -+ return DSLHAL_ERROR_MARGIN_API_FAILURE; -+ -+ dprintf(5," dslhal_api_setThreshold() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction does sets the Margin monitoring flag -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int trainflag -+ * unsigned int shwtflag -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl,unsigned int trainflag,unsigned int shwtflag) -+{ -+ DEV_HOST_oamWrNegoParaDef_t NegoPara; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ -+ dprintf(5," dslhal_ctrl_setMonitorFlags()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ -+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ if (trainflag) -+ { -+ NegoPara.marginMonitorTrning = TRUE; -+ } -+ else -+ { -+ NegoPara.marginMonitorTrning = FALSE; -+ } -+ if (shwtflag) -+ { -+ NegoPara.marginMonitorShwtme = TRUE; -+ } -+ else -+ { -+ NegoPara.marginMonitorShwtme = FALSE; -+ } -+ -+ rc = dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_MARGIN_API_FAILURE; -+ dprintf(5," dslhal_api_setMonitorFlags() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNum) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the eoc Serial Number -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *SerialNum : Input eoc Serial Number -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber) -+{ -+ DEV_HOST_eocVarDef_t eocVar; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setEocSerialNumber()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, -+ &eocVar, sizeof(DEV_HOST_eocVarDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ shim_osMoveMemory(eocVar.serialNumber,SerialNumber,32); -+ -+ rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_EOCREG_API_FAILURE; -+ dprintf(5," dslhal_api_setEocSerialNumber() Done\n"); -+ -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the eoc Vendor ID -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *VendorID : Input eoc Vendor ID -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) -+{ -+ DEV_HOST_oamWrNegoParaDef_t NegoPara; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setEocVendorId()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ -+ -+ rc = dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&NegoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ shim_osMoveMemory(NegoPara.gdmtVendorId,VendorID,8); -+ rc= dslhal_support_blockWrite(&NegoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_EOCREG_API_FAILURE; -+ -+ dprintf(5," dslhal_api_setEocVendorId() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the eoc Revision Number -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *RevNum : Input eoc Revision Number -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNumber) -+{ -+ -+ DEV_HOST_eocVarDef_t eocVar; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ /*add for UR2 test */ -+ UINT8 selfTestResults[2]; -+ memset(selfTestResults,0x00,sizeof(selfTestResults)); -+ /* add for UR2 test */ -+ dprintf(5," dslhal_api_setEocRevisionNumber()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, -+ &eocVar, sizeof(DEV_HOST_eocVarDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ shim_osMoveMemory(eocVar.revNumber,RevNumber,4); -+ /* add for UR2 test */ -+ shim_osMoveMemory(eocVar.dummy,selfTestResults,2); -+ /* add for UR2 test */ -+ rc=dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_EOCREG_API_FAILURE; -+ dprintf(5," dslhal_api_setEocRevisionNumber Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the eoc ATUR Config Register -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *ATURConfig : Input eoc ATUR Config Register -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig) -+{ -+ -+ DEV_HOST_eocVarDef_t eocVar; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setAturConfig()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.eocVar_p = (DEV_HOST_eocVarDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.eocVar_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.eocVar_p, -+ &eocVar, sizeof(DEV_HOST_eocVarDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ shim_osMoveMemory(eocVar.aturConfig,ATURConfig,30); -+ rc= dslhal_support_blockWrite(&eocVar,dspOamSharedInterface.eocVar_p,sizeof(DEV_HOST_eocVarDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_EOCREG_API_FAILURE; -+ dprintf(5," dslhal_api_setAturConfig() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int flag; //if flag = TRUE set rateadapt flag else reset it -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl,unsigned int flag) -+{ -+ DEV_HOST_msg_t aturMsg; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setRateAdaptFlag()\n"); -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p, -+ &aturMsg, sizeof(DEV_HOST_msg_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ if(flag) -+ aturMsg.rateAdapt = TRUE; -+ else -+ aturMsg.rateAdapt = FALSE; -+ -+ rc= dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ dprintf(5," dslhal_api_setRateAdaptFlag() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int flag; // if flag = TRUE, set trellis flag else reset -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setTrellisFlag(tidsl_t *ptidsl,unsigned int flag) -+{ -+ -+ DEV_HOST_msg_t aturMsg; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_oamWrNegoParaDef_t negoPara; -+ int rc; -+ dprintf(5," dslhal_api_setTrellisFlag()\n"); -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p,&aturMsg, sizeof(DEV_HOST_msg_t)); -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ rc += dslhal_support_blockRead((PVOID) dspOamSharedInterface.oamWriteNegoParams_p,&negoPara, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ if(flag) -+ { -+ aturMsg.trellis = TRUE; -+ negoPara.rMsgs1[2] |= 0x02; -+ } -+ else -+ { -+ aturMsg.trellis = FALSE; -+ negoPara.rMsgs1[2] &= 0xFD; -+ } -+ rc=0; -+ rc+=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); -+ rc+= dslhal_support_blockWrite(&negoPara,dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ -+ dprintf(5," dslhal_api_setTrellisFlag() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int maxbits : should be a value between 0-15 -+* -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits) -+{ -+ -+ DEV_HOST_msg_t aturMsg; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ -+ dprintf(5," dslhal_api_setMaxBitsPerCarrier()\n"); -+ if(maxbits>15) -+ { -+ dprintf(3,"Maximum Number of Bits per carrier cannot exceed 15!\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p, -+ &aturMsg, sizeof(DEV_HOST_msg_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ aturMsg.maxBits = maxbits; -+ -+ rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ dprintf(5," dslhal_api_setMaxBitsPerCarrier() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer -+* size 64-512 -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth) -+{ -+ DEV_HOST_msg_t aturMsg; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ int rc; -+ dprintf(5," dslhal_api_setMaxInterleaverDepth()\n"); -+ if(maxdepth>3) -+ { -+ dprintf(3,"Invalid Value for maximum interleave depth (must be <3)\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.aturMsg_p = (DEV_HOST_msg_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.aturMsg_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.aturMsg_p, -+ &aturMsg, sizeof(DEV_HOST_msg_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ aturMsg.maxIntlvDepth = maxdepth; -+ -+ rc=dslhal_support_blockWrite(&aturMsg,dspOamSharedInterface.aturMsg_p,sizeof(DEV_HOST_msg_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ dprintf(5," dslhal_api_setMaxInterleaverDepth() Done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_acknowledgeInterrupt(tidsl_t * ptidsl) -+{ -+ unsigned int interruptSources=0; -+ /* Clear out the DSLSS Interrupt Registers to acknowledge Interrupt */ -+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_MAILBOX_INTERRUPTS) -+ { -+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_MAILBOX_INTERRUPTS; -+ dprintf(5,"Mailbox Interrupt \n"); -+ } -+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_BITFIELD_INTERRUPTS) -+ { -+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_BITFIELD_INTERRUPTS; -+ dprintf(5,"Bitfield Interrupt \n"); -+ } -+ if(DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_SOURCE_REGISTER))&MASK_HEARTBEAT_INTERRUPTS) -+ { -+ DSLHAL_REG32(dslhal_support_hostDspAddressTranslate(DSP_INTERRUPT_CLEAR_REGISTER))|=MASK_HEARTBEAT_INTERRUPTS; -+ dprintf(5,"HeartBeat Interrupt \n"); -+ } -+ interruptSources = dslhal_support_parseInterruptSource(ptidsl); -+ if(interruptSources < 0) -+ return DSLHAL_ERROR_INTERRUPT_FAILURE; -+ else -+ return interruptSources; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_disableDspHybridSelect() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_disableDspHybridSelect(tidsl_t * ptidsl,unsigned int disable) -+{ -+ int rc; -+ DEV_HOST_phyPerf_t phyPerf; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p, -+ &phyPerf, sizeof(DEV_HOST_phyPerf_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(disable==1) -+ { -+ phyPerf.disableDspHybridSelect_f = TRUE; -+ // hybrid_selected = 888; -+ } -+ else -+ { -+ phyPerf.disableDspHybridSelect_f = FALSE; -+ // hybrid_selected = 888; -+ } -+ rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); -+ if(rc) -+ return DSLHAL_ERROR_HYBRID_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_selectHybrid() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_selectHybrid(tidsl_t * ptidsl,unsigned int hybridNum) -+{ -+ int rc; -+ DEV_HOST_phyPerf_t phyPerf; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(hybridNum<1||hybridNum>4) -+ { -+ dprintf(3,"Invalid Value for Hybrid Number \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p, -+ &phyPerf, sizeof(DEV_HOST_phyPerf_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ phyPerf.hostSelectHybridNum = hybridNum; -+ rc=dslhal_support_blockWrite(&phyPerf,dspOamSharedInterface.phyPerf_p,sizeof(DEV_HOST_phyPerf_t)); -+ if(rc) -+ return DSLHAL_ERROR_HYBRID_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_reportHybridMetrics() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_reportHybridMetrics(tidsl_t * ptidsl,int *metric) -+{ -+ int rc,i; -+ DEV_HOST_phyPerf_t phyPerf; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(hybrid_selected>5) -+ { -+ dprintf(4,"Hybrid Metrics Not Yet Available \n"); -+ } -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return (0-DSLHAL_ERROR_INVALID_PARAM); -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return (0-DSLHAL_ERROR_BLOCK_READ); -+ } -+ -+ dspOamSharedInterface.phyPerf_p = (DEV_HOST_phyPerf_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.phyPerf_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.phyPerf_p, -+ &phyPerf, sizeof(DEV_HOST_phyPerf_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return (0-DSLHAL_ERROR_BLOCK_READ); -+ } -+ rc = sizeof(phyPerf.hybridCost); -+ for(i=0;i<(rc/4);i++) -+ { -+ metric[i] = dslhal_support_byteSwap32(phyPerf.hybridCost[i]); -+ } -+ return hybrid_selected; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction selects inner/outer pair on RJ11. -+ * -+ * INPUT: PITIDSLHW_T *ptidsl , unsigned int pairSelect -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl,unsigned int pairSelect) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_api_sendQuiet\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, HOST_RJ11SELECT, (unsigned int)pairSelect, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_api_sendQuiet failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction resets the failed state log stored -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl) -+{ -+ -+ int rc; -+ dprintf(5, "dslhal_api_resetTrainFailureLog \n"); -+ for(rc=0;rc<ptidsl->AppData.trainFails;rc++) -+ { -+ ptidsl->AppData.trainFailStates[rc]=0; -+ } -+ ptidsl->AppData.trainFails = 0; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureLed() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureLed(tidsl_t * ptidsl,unsigned int idLed, unsigned int onOff) -+{ -+ int rc; -+ DEV_HOST_modemEnvPublic_t modemEnv; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(idLed>2 || onOff>2) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p, -+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(idLed==ID_DSL_LINK_LED) -+ { -+ modemEnv.overrideDslLinkLed_f = TRUE; -+ if(onOff!=2) -+ modemEnv.dslLinkLedState_f = onOff; -+ } -+ if(idLed==ID_DSL_ACT_LED) -+ { -+ modemEnv.overrideDslLinkLed_f = TRUE; -+ if(onOff!=2) -+ modemEnv.dslLinkLedState_f = onOff; -+ } -+ if(idLed==ID_RESTORE_DEFAULT_LED) -+ { -+ modemEnv.overrideDslLinkLed_f = FALSE; -+ modemEnv.overrideDslActLed_f = FALSE; -+ } -+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); -+ if(rc) -+ return DSLHAL_ERROR_MODEMENV_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureExternBert() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureExternBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal) -+{ -+ int rc; -+ DEV_HOST_modemEnvPublic_t modemEnv; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(configParm>1 || parmVal>1) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p, -+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(configParm==0) -+ { -+ modemEnv.externalBert = parmVal; -+ } -+ if(configParm==1) -+ { -+ modemEnv.usBertPattern = parmVal; -+ } -+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); -+ if(rc) -+ return DSLHAL_ERROR_MODEMENV_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureAtmBert() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureAtmBert(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal) -+{ -+ int rc; -+ DEV_HOST_atmDsBert_t atmDsBert; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(configParm>1 || parmVal>1) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.atmDsBert_p = (DEV_HOST_atmDsBert_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmDsBert_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmDsBert_p, -+ &atmDsBert, sizeof(DEV_HOST_atmDsBert_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(configParm==0) -+ { -+ atmDsBert.atmBertFlag = parmVal; -+ rc=dslhal_support_blockWrite(&atmDsBert,dspOamSharedInterface.atmDsBert_p,sizeof(DEV_HOST_atmDsBert_t)); -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ } -+ if(configParm==1) -+ { -+ ptidsl->AppData.atmBertBitCountLow = atmDsBert.bitCountLow; -+ ptidsl->AppData.atmBertBitCountHigh = atmDsBert.bitCountHigh; -+ ptidsl->AppData.atmBertBitErrorCountLow = atmDsBert.bitErrorCountLow; -+ ptidsl->AppData.atmBertBitErrorCountHigh = atmDsBert.bitErrorCountHigh; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureDgaspLpr() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Configures dying gasp LPR signal -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureDgaspLpr(tidsl_t * ptidsl,unsigned int configParm, unsigned int parmVal) -+{ -+ int rc; -+ DEV_HOST_modemEnvPublic_t modemEnv; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ if(configParm>1 || parmVal>1) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ if(!ptidsl) -+ { -+ dprintf(3, "Error: PTIDSL pointer invalid\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.modemEnvPublic_p = (DEV_HOST_modemEnvPublic_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.modemEnvPublic_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.modemEnvPublic_p, -+ &modemEnv, sizeof(DEV_HOST_modemEnvPublic_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(configParm==0) -+ { -+ modemEnv.dGaspLprIndicator_f = parmVal; -+ } -+ if(configParm==1) -+ { -+ modemEnv.overrideDspLprGasp_f = parmVal; -+ } -+ rc=dslhal_support_blockWrite(&modemEnv,dspOamSharedInterface.modemEnvPublic_p,sizeof(DEV_HOST_modemEnvPublic_t)); -+ if(rc) -+ return DSLHAL_ERROR_MODEMENV_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_genericDspRead() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads from a Generic Location in the DSP Host Interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_genericDspRead(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, -+ unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes) -+{ -+ int rc=0; -+ unsigned int hostIfLoc,structLoc,elementLoc; -+ hostIfLoc = (unsigned int)ptidsl->pmainAddr; -+ if(numBytes<=0 || !localBuffer || !ptidsl) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ rc += dslhal_support_blockRead((PVOID)(hostIfLoc+sizeof(int)*offset1), &structLoc,sizeof(int)); -+ structLoc = dslhal_support_byteSwap32(structLoc); -+ rc += dslhal_support_blockRead((PVOID)(structLoc+sizeof(int)*offset2), &elementLoc,sizeof(int)); -+ elementLoc = dslhal_support_byteSwap32(elementLoc); -+ dprintf(3,"Host IF Location: 0x%x Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc); -+ rc += dslhal_support_blockRead((PVOID)(elementLoc+(offset3*4)), localBuffer,numBytes); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_genericDspWrite() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Writes to a Generic Location in the DSP Host Interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_genericDspWrite(tidsl_t * ptidsl,unsigned int offset1, unsigned int offset2, -+ unsigned int offset3, unsigned char *localBuffer, unsigned int numBytes) -+{ -+ -+ int rc=0; -+ unsigned int hostIfLoc,structLoc,elementLoc; -+ hostIfLoc = (unsigned int)ptidsl->pmainAddr; -+ if(numBytes<=0 || !localBuffer || !ptidsl) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ rc += dslhal_support_blockRead((PVOID)(hostIfLoc+(offset1*4)), &structLoc,4); -+ structLoc = dslhal_support_byteSwap32(structLoc); -+ rc += dslhal_support_blockRead((PVOID)(structLoc+(offset2*4)), &elementLoc,4); -+ elementLoc = dslhal_support_byteSwap32(elementLoc); -+ dprintf(3,"Host IF Location: 0x%x Struct1 Location: 0x%x Element Location: 0x%x \n",hostIfLoc, structLoc, elementLoc); -+ rc += dslhal_support_blockWrite(localBuffer,(PVOID)(elementLoc+(offset3*4)),numBytes); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_dspInterfaceRead() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads from a Generic Location in the DSP Host Interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_dspInterfaceRead(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, -+ unsigned int *offsets, unsigned char *localBuffer, unsigned int numBytes) -+{ -+ int rc=0, off=0; -+ unsigned int prevAddr,currAddr; -+ prevAddr = baseAddr; -+ if(numBytes<=0 || !localBuffer || !ptidsl || !offsets) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ for(off=0;off<numOffsets-1;off++) -+ { -+ rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4); -+ currAddr = dslhal_support_byteSwap32(currAddr); -+ prevAddr = currAddr; -+ dprintf(5,"Curr Addr = 0x%x Current Level: %d \n",currAddr,off); -+ } -+ currAddr = currAddr + offsets[numOffsets-1]*4; -+ rc += dslhal_support_blockRead((PVOID)(currAddr),localBuffer,numBytes); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_dspInterfaceWrite() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Writes to a Generic Location in the DSP Host Interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_dspInterfaceWrite(tidsl_t * ptidsl,unsigned int baseAddr, unsigned int numOffsets, -+ unsigned int *offsets,unsigned char *localBuffer, unsigned int numBytes) -+{ -+ -+ int rc=0, off=0; -+ unsigned int prevAddr,currAddr; -+ prevAddr = baseAddr; -+ if(numBytes<=0 || !localBuffer || !ptidsl || !offsets) -+ { -+ dprintf(3,"Invalid input parameter \n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ for(off=0;off<numOffsets-1;off++) -+ { -+ rc += dslhal_support_blockRead((PVOID)(prevAddr+(4*offsets[off])), &currAddr,4); -+ currAddr = dslhal_support_byteSwap32(currAddr); -+ prevAddr = currAddr; -+ dprintf(5,"Curr Addr = 0x%x Current Level: %d \n",currAddr,off); -+ } -+ currAddr = currAddr + offsets[numOffsets-1]*4; -+ rc += dslhal_support_blockWrite(localBuffer,(PVOID)(currAddr),numBytes); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int cmd -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+/* Function is commented out for now since, its not tested */ -+ /*unsigned int dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd) -+{ -+ int rc; -+ -+ dprintf(5, "dslhal_api_sendMailboxCommand\n"); -+ rc = dslhal_support_writeHostMailbox(ptidsl, cmd, 0, 0, 0); -+ if(rc) -+ { -+ dprintf(1,"dslhal_api_sendMailboxCommand failed\n"); -+ return DSLHAL_ERROR_CTRL_API_FAILURE; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} */ -+ -+ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_api.h linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h ---- linux.old/drivers/atm/sangam_atm/dsl_hal_api.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_api.h 2005-08-23 04:46:50.097843696 +0200 -@@ -0,0 +1,1721 @@ -+#ifndef __DSL_HAL_API_H__ -+#define __DSL_HAL_API_H__ 1 -+/******************************************************************************* -+* FILE PURPOSE: DSL HAL to Application Interface for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_application_interface.h -+* -+* DESCRIPTION: -+* DSL-Application Interface Structures -+* -+* -+* By: Ramakrishnan Parasuraman -+* -+* (C) Copyright 2003, Texas Instruments, Inc. -+* History -+* Data Version By Notes -+* 06Feb03 0.00 RamP Initial Version Written -+* 07Apr03 0.01 RamP Commented out typedefs -+* 09Apr03 0.02 RamP Added deviceContext and extended -+* dspVer to include bugfixes -+* 14Apr03 0.03 RamP Added stateTransition to structure -+* 16Apr03 0.04 RamP Removed typedefs; changed dspVer -+* 22Apr03 0.05 RamP Moved acknowledgeInterrupt from -+* (alpha) support module into this -+* 24Apr03 0.06 RamP Moved the RSTATE enum from register -+* -+* 28Apr03 0.07 RamP Added additional parameter to the -+* (alpha +) handleInterrupt function for intrSrc -+* 14May03 0.08 RamP Added hybrid switching APIs -+* (alpha ++) Added statistics fields in AppData -+* Added netService identifier -+* 20May03 0.09 RamP Added Inner/Outer pair API support. -+* Added dying gasp message. -+* 29May03 0.10 RamP Added coProfile structure -+* 04Jun03 0.11 RamP Added margin per tone statistics, -+* Added timing counters, added train -+* failure functions,added config flags -+* 06Jun03 0.12 RamP Added LED, STM Bert, dGasp LPR -+* config API functions -+* 09Jun03 0.13 RamP Added ATM Bert function, CO stats -+* Moved stateTransition to ITIDSLHW -+* (Beta) Moved configFlag to ITIDSLHW, -+* Cleaned up fifoInfo structure -+* Added US/DS R/S FEC parameters -+* 21Aug03 0.14 RamP Added g.hs message buffer, us/ds -+* bits n gains table, negoMsgs struct -+* (act) bitswap stucts/indices, trainstate, -+* Added functions for advanced config -+* Added gross gain and line length -+* 29Sep03 0.15 RamP Added tokens for advanced config -+* module api functions -+* 12Oct03 0.16 RamP Added adsl2Msgs structure with worst -+* case size for variable length msgs -+* Added API function prototypes -+* 21Oct03 0.17 RamP Added typedef for current modem -+* user settings -+* 28Oct03 0.18 RamP Added function to config blackout -+* bitmap in the RMSGPCB message -+* 20Nov03 0.19 RamP Added functions for generic and -+* host interface read - write -+* 24Nov03 0.20 RamP Added enum for detailed state track -+* Added element for state bit fields -+* Addded rState for encoded main state -+* Added blackout valid flag -+* 26Dec03 0.21 RamP Added defines for oamFeature masks -+* 30Dec03 0.22 RamP Increased sizes for cMsgPcb,RMsgPcb -+* to incorporate DELT mode messages -+* 30Dec03 0.23 RamP Added generic mailbox command fxn -+*******************************************************************************/ -+ -+#ifdef INTERNAL_BUILD -+#include <dsl_hal_api_pvt.h> -+#endif -+ -+#define NUM_PAGES 4 -+#define OAMFEATURE_AUTORETRAIN_MASK 0x00000001 -+#define OAMFEATURE_TC_SYNC_DETECT_MASK 0x00000002 -+#define OAMFEATURE_EOCAOC_INTERRUPT_MASK 0x00000004 -+#define OAMFEATURE_CONS_DISP_DISABLE_MASK 0x00000008 -+#define OAMFEATURE_GHSMSG_INTERRUPT_MASK 0x00000010 -+ -+typedef struct tagTIOIDINFO -+{ -+ unsigned int bState; /* addr->bDSPATURState */ -+ unsigned int USConRate; /* US Conection Rates */ -+ unsigned int DSConRate; /* DS Connection Rates */ -+ unsigned int USPayload; /* ennic_tx_pullup*/ -+ unsigned int DSPayload; /* ennic_indicate_receive_packet*/ -+ unsigned int FrmMode; /* addr->atur_msg.framing_mode*/ -+ unsigned int MaxFrmMode; -+ unsigned int TrainedPath; /* Status of the Modem in which trained (Fast or Interleaved Path) */ -+ unsigned int TrainedMode; /* Status of the mode in which the modem is trained (G.dmt, T1.413, etc) */ -+ -+ /* Superframe Count */ -+ unsigned int usSuperFrmCnt; /* Num of US Superframes */ -+ unsigned int dsSuperFrmCnt; /* Num of DS Superframes */ -+ -+ /* LOS & SEF Stats */ -+ unsigned int LOS_errors; /* Num of ADSL frames where loss-of-sync */ -+ unsigned int SEF_errors; /* Num of severly errored ADSL frames - LOS > MAXBADSYNC ADSL frames */ -+ unsigned int coLosErrors; /* CO LOS Defects */ -+ unsigned int coRdiErrors; /* CO RDI defects */ -+ /* CRC Stats */ -+ unsigned int usICRC_errors; /* Num of Upstream CRC errored ADSL frames on Interleaved Path */ -+ unsigned int usFCRC_errors; /* Num of Upstream CRC errored ADSL frames on Fast Path */ -+ unsigned int dsICRC_errors; /* Num of Downstream CRC errored ADSL frames on Interleaved Path */ -+ unsigned int dsFCRC_errors; /* Num of Downstream CRC errored ADSL frames on Fast Path */ -+ -+ /* FEC Stats */ -+ unsigned int usIFEC_errors; /* Num of Upstream FEC errored (corrected) ADSL frames on Interleaved Path */ -+ unsigned int usFFEC_errors; /* Num of Upstream FEC errored (corrected) ADSL frames on Fast Path */ -+ unsigned int dsIFEC_errors; /* Num of Downstream FEC errored (corrected) ADSL frames on Interleaved Path */ -+ unsigned int dsFFEC_errors; /* Num of Downstream FEC errored (corrected) ADSL frames on Fast Path */ -+ -+ /* NCD Stats */ -+ unsigned int usINCD_error; /* UpStream No Cell Delineation on Interleaved Path */ -+ unsigned int usFNCD_error; /* UpStream No Cell Delineation on Fast Path */ -+ unsigned int dsINCD_error; /* Downstream No Cell Delineation on Interleaved Path */ -+ unsigned int dsFNCD_error; /* Downstream No Cell Delineation on Fast Path */ -+ -+ /* LCD Stats */ -+ unsigned int usILCD_errors; /* UpStream Loss of Cell Delineation (within the same connection) on Interleaved Path */ -+ unsigned int usFLCD_errors; /* UpStream Loss of Cell Delineation (within the same connection) on Fast Path */ -+ unsigned int dsILCD_errors; /* Downstream Loss of Cell Delineation (within the same connection) on Interleaved Path */ -+ unsigned int dsFLCD_errors; /* Downstream Loss of Cell Delineation (within the same connection) on Fast Path */ -+ -+ /* HEC Stats */ -+ unsigned int usIHEC_errors; /* Num of Upstream HEC errored ADSL frames on Interleaved Path */ -+ unsigned int usFHEC_errors; /* Num of Upstream HEC errored ADSL frames on Fast Path */ -+ unsigned int dsIHEC_errors; /* Num of Downstream HEC errored ADSL frames on Interleaved Path */ -+ unsigned int dsFHEC_errors; /* Num of Downstream HEC errored ADSL frames on Fast Path */ -+ -+ /* Upstream ATM Stats */ -+ unsigned int usAtm_count[2]; /* Upstream Good Cell Count */ -+ unsigned int usIdle_count[2]; /* Upstream Idle Cell Count */ -+ unsigned int usPdu_count[2]; /* UpStream PDU Count */ -+ -+ /* Downstream ATM Stats */ -+ unsigned int dsGood_count[2]; /* Downstream Good Cell Count */ -+ unsigned int dsIdle_count[2]; /* Downstream Idle Cell Count */ -+ unsigned int dsBadHec_count[2]; /* Downstream Bad Hec Cell Count */ -+ unsigned int dsOVFDrop_count[2]; /* Downstream Overflow Dropped Cell Count */ -+ unsigned int dsPdu_count[2]; /* Downstream PDU Count */ -+ /* (only looks for end of pdu on good atm cells received, */ -+ /* not on Bad_Hec or Overflow cell) */ -+ -+ unsigned int dsLineAttn; /* DS Line Attenuation */ -+ unsigned int dsMargin; /* Measured DS MArgin */ -+ -+ unsigned int usLineAttn; -+ unsigned int usMargin; -+ -+ unsigned char bCMsgs1[6]; -+ unsigned char bRMsgs1[6]; -+ unsigned char bCRates2; -+ unsigned char bRRates2; -+ unsigned char bRRates1[4][11]; -+ unsigned char bCMsgs2[4]; -+ unsigned char bCRates1[4][30]; -+ unsigned char bRMsgs2[4]; -+ -+ unsigned int USPeakCellRate; -+ -+ unsigned int dsl_status; -+ unsigned int dsl_modulation; -+ unsigned char dsl_ghsRxBuf[10][64]; -+ unsigned char dsl_GHS_msg_type[2]; -+ -+ int TxVCs[12]; -+ int RxVCs[12]; -+ -+ unsigned int vci_vpi_val; -+ -+ unsigned char BitAllocTblDstrm[256]; -+ unsigned char BitAllocTblUstrm[32]; -+ signed char marginTblDstrm[256]; -+ unsigned char rBng[512]; -+ unsigned char cBng[126]; -+ int usTxPower; -+ int dsTxPower; -+ short rxSnrPerBin0[256]; -+ short rxSnrPerBin1[256]; -+ short rxSnrPerBin2[256]; -+ -+ unsigned int StdMode; -+ unsigned int atucVendorId; -+ unsigned char currentHybridNum; -+ unsigned char atucRevisionNum; -+ unsigned int trainFails; -+ unsigned int trainFailStates[30]; -+ unsigned int idleTick; -+ unsigned int initTick; -+ unsigned int showtimeTick; -+ unsigned char dsFastParityBytesPerSymbol; -+ unsigned char dsIntlvParityBytesPerSymbol; -+ unsigned char dsSymbolsPerCodeWord; -+ unsigned int dsInterleaverDepth; -+ unsigned char usFastParityBytesPerSymbol; -+ unsigned char usIntlvParityBytesPerSymbol; -+ unsigned char usSymbolsPerCodeWord; -+ unsigned int usInterleaverDepth; -+ unsigned int atmBertBitCountLow; -+ unsigned int atmBertBitCountHigh; -+ unsigned int atmBertBitErrorCountLow; -+ unsigned int atmBertBitErrorCountHigh; -+ unsigned int lineLength; -+ unsigned int grossGain; -+ int rxNoisePower0[256]; -+ int rxNoisePower1[256]; -+}TIOIDINFO,*PTIOIDINFO; -+ -+typedef struct{ -+ unsigned char bCMsgs1[6]; -+ unsigned char bCRates2; -+ unsigned char bRRates2; -+ unsigned char bRRates1[4][11]; -+ unsigned char bCMsgs2[4]; -+ unsigned char bCRates1[4][30]; -+ unsigned char bCRatesRA[4][30]; -+ unsigned char bRMsgs2[4]; -+ unsigned char bRRatesRA[4]; -+ unsigned char bRMsgsRA[12]; -+ unsigned char bCMsgsRA[6]; -+}negoMsgs; -+ -+typedef struct{ -+ unsigned char cMsgFmt[2]; -+ unsigned char rMsgFmt[2]; -+ unsigned char cMsgPcb[12]; -+ unsigned char rMsgPcb[70]; -+ unsigned char dummy1[2]; -+ unsigned char cMsg1[40]; -+ unsigned char rMsg1[4]; -+ unsigned char cMsg2[8]; -+ unsigned char rMsg2[64]; -+ unsigned char cParams[264]; -+ unsigned char rParams[2088]; -+ unsigned short cMsgPcbLen; -+ unsigned short rMsgPcbLen; -+ unsigned short cMsg1Len; -+ unsigned short rMsg1Len; -+ unsigned short cMsg2Len; -+ unsigned short rMsg2Len; -+ unsigned short cParamsLen; -+ unsigned short rParamsLen; -+}adsl2Msgs; -+ -+typedef struct{ -+ unsigned char rMsg1Ld[16]; -+ unsigned char rMsg2Ld[260]; -+ unsigned char rMsg3Ld[260]; -+ unsigned char rMsg4Ld[260]; -+ unsigned char rMsg5Ld[260]; -+ unsigned char rMsg6Ld[260]; -+ unsigned char rMsg7Ld[260]; -+ unsigned char rMsg8Ld[260]; -+ unsigned char rMsg9Ld[260]; -+ unsigned char cMsg1Ld[16]; -+ unsigned char cMsg2Ld[260]; -+ unsigned char cMsg3Ld[132]; -+ unsigned char cMsg4Ld[68]; -+ unsigned char cMsg5Ld[68]; -+ unsigned short rMsg1LdLen; -+ unsigned short rMsgxLdLen; -+ unsigned short cMsg1LdLen; -+ unsigned short cMsg2LdLen; -+ unsigned short cMsg3LdLen; -+ unsigned short cMsg4LdLen; -+ unsigned short cMsg5LdLen; -+ unsigned short dummy8; -+}adsl2DeltMsgs; -+ -+typedef struct{ -+ unsigned char trellisFlag; -+ unsigned char rateAdaptFlag; -+ unsigned char marginMonitorTraining; -+ unsigned char marginMonitorShowtime; -+ signed char marginThreshold; -+ unsigned char disableLosFlag; -+ unsigned char aturConfig[30]; -+ unsigned char eocVendorId[8]; -+ unsigned char eocSerialNumber[32]; -+ unsigned char eocRevisionNumber[4]; -+}currentPhySettings; -+ -+ -+typedef struct -+{ -+ unsigned int PmemStartWtAddr; /* source address in host memory */ -+ unsigned int OverlayXferCount; /* number of 32bit words to be transfered */ -+ unsigned int BinAddr; /* destination address in dsp's pmem */ -+ unsigned int overlayHostAddr; -+ unsigned int olayPageCrc32; -+ unsigned int SecOffset; -+} OlayDP_Def; -+ -+typedef struct -+{ -+ unsigned int timeStamp; /* TimeStp revision */ -+ unsigned char major; /* Major revision */ -+ unsigned char minor; /* Minor revision */ -+ unsigned char bugFix; /* BugFix revision */ -+ unsigned char buildNum; /* BuildNum revision */ -+ unsigned char reserved; /* for future use */ -+}dspVer; -+ -+typedef struct{ -+ unsigned char major; -+ unsigned char minor; -+ unsigned char bugfix; -+ unsigned char buildNum; -+ unsigned int timeStamp; -+}dslVer; -+ -+typedef struct{ -+ unsigned char bitSwapCommand[6]; -+ unsigned char bitSwapBinNum[6]; -+ unsigned char bitSwapSFrmCnt; -+}dslBitSwapDef; -+ -+typedef struct{ -+ unsigned int aturState; -+ unsigned int subStateIndex; -+ unsigned int timeStamp; -+}trainStateInfo; -+ -+typedef struct{ -+ unsigned char ctrlBits; -+ unsigned char infoBits; -+}eocMessageDef; -+ -+enum -+{ -+ RSTATE_TEST, -+ RSTATE_IDLE, -+ RSTATE_INIT, -+ RSTATE_HS, -+ RSTATE_RTDL, -+ RSTATE_SHOWTIME, -+}; -+ -+typedef enum -+{ -+ ATU_RZERO1 = 100, -+ ATU_RTEST = 101, -+ ATU_RIDLE = 102, -+ ATU_RINIT = 103, -+ ATU_RRESET = 104, -+ GDMT_NSFLR = 105, -+ GDMT_TONE = 106, -+ GDMT_SILENT = 107, -+ GDMT_NEGO = 108, -+ GDMT_FAIL = 109, -+ GDMT_ACKX = 110, -+ GDMT_QUIET2 = 111, -+ ATU_RZERO2 = 200, -+ T1413_NSFLR = 201, -+ T1413_ACTREQ = 202, -+ T1413_ACTMON = 203, -+ T1413_FAIL = 204, -+ T1413_ACKX = 205, -+ T1413_QUIET2 = 206, -+ ATU_RQUIET2 = 207, -+ ATU_RREVERB1 = 208, -+ ATU_RQUIET3 = 209, -+ ATU_RECT = 210, -+ ATU_RREVERB2 = 211, -+ ATU_RSEGUE1 = 212, -+ ATU_RREVERB3 = 213, -+ ATU_RSEGUE2 = 214, -+ ATU_RRATES1 = 215, -+ ATU_RMSGS1 = 216, -+ ATU_RMEDLEY = 217, -+ ATU_RREVERB4 = 218, -+ ATU_RSEGUE3 = 219, -+ ATU_RMSGSRA = 220, -+ ATU_RRATESRA = 221, -+ ATU_RREVERBRA = 222, -+ ATU_RSEGUERA = 223, -+ ATU_RMSGS2 = 224, -+ ATU_RRATES2 = 225, -+ ATU_RREVERB5 = 226, -+ ATU_RSEGUE4 = 227, -+ ATU_RBNG = 228, -+ ATU_RREVERB6 = 229, -+ ATU_RSHOWTIME = 230, -+ ATU_RZERO3 = 300, -+ ADSL2_QUIET1 = 301, -+ ADSL2_COMB1 = 302, -+ ADSL2_QUIET2 = 303, -+ ADSL2_COMB2 = 304, -+ ADSL2_ICOMB1 = 305, -+ ADSL2_LINEPROBE = 306, -+ ADSL2_QUIET3 = 307, -+ ADSL2_COMB3 = 308, -+ ADSL2_ICOMB2 = 309, -+ ADSL2_RMSGFMT = 310, -+ ADSL2_RMSGPCB = 311, -+ ADSL2_REVERB1 = 312, -+ ADSL2_QUIET4 = 313, -+ ADSL2_REVERB2 = 314, -+ ADSL2_QUIET5 = 315, -+ ADSL2_REVERB3 = 316, -+ ADSL2_ECT = 317, -+ ADSL2_REVERB4 = 318, -+ ADSL2_SEGUE1 = 319, -+ ADSL2_REVERB5 = 320, -+ ADSL2_SEGUE2 = 321, -+ ADSL2_RMSG1 = 322, -+ ADSL2_MEDLEY = 323, -+ ADSL2_EXCHANGE = 324, -+ ADSL2_RMSG2 = 325, -+ ADSL2_REVERB6 = 326, -+ ADSL2_SEGUE3 = 327, -+ ADSL2_RPARAMS = 328, -+ ADSL2_REVERB7 = 329, -+ ADSL2_SEGUE4 = 330, -+ ATU_RZERO4 = 400, -+ DELT_SEGUE1 = 401, -+ DELT_REVERB5 = 402, -+ DELT_SEGUE2 = 403, -+ DELT_EXCHANGE = 404, -+ DELT_SEGUELD = 405, -+ DELT_RMSGLD = 406, -+ DELT_QUIET1LD = 407, -+ DELT_QUIET2LD = 408, -+ DELT_RACK1 = 409, -+ DELT_RNACK1 = 410, -+ DELT_QUIETLAST = 411 -+} modemStates_t; -+ -+enum -+{ -+ DSLTRAIN_NO_MODE, -+ DSLTRAIN_MULTI_MODE, -+ DSLTRAIN_T1413_MODE, -+ DSLTRAIN_GDMT_MODE, -+ DSLTRAIN_GLITE_MODE -+}; -+ -+enum -+{ -+ ID_RESTORE_DEFAULT_LED, -+ ID_DSL_LINK_LED, -+ ID_DSL_ACT_LED -+}; -+ -+typedef struct _ITIDSLHW -+{ -+ /* struct _TIDSL_IHwVtbl * pVtbl; */ -+ unsigned char* fwimage; -+ void* pmainAddr; -+ void* pOsContext; -+ unsigned int ReferenceCount; -+ unsigned int netService; -+ -+ int InitFlag; -+ -+ int imagesize; -+ -+ unsigned int lConnected; -+ unsigned int bStatisticsInitialized; -+ unsigned int rState; -+ unsigned int bShutdown; -+ unsigned int blackOutValid_f; -+ unsigned char blackOutBits[64]; -+ unsigned int bAutoRetrain; -+ volatile unsigned int bOverlayPageLoaded; -+ unsigned int stateTransition; -+ unsigned int configFlag; -+ unsigned int dsBitSwapInx; -+ unsigned int usBitSwapInx; -+ unsigned int trainStateInx; -+ unsigned int usEocMsgInx; -+ unsigned int dsEocMsgInx; -+ unsigned int reasonForDrop; -+ TIOIDINFO AppData; -+ dspVer dspVer; -+ -+ OlayDP_Def olayDpPage[NUM_PAGES]; -+ OlayDP_Def coProfiles; -+ OlayDP_Def constDisplay; -+ dslBitSwapDef dsBitSwap[30]; -+ dslBitSwapDef usBitSwap[30]; -+ trainStateInfo trainHistory[120]; -+ eocMessageDef usEocMsgBuf[30]; -+ eocMessageDef dsEocMsgBuf[30]; -+ adsl2Msgs adsl2TrainingMessages; -+ adsl2DeltMsgs adsl2DiagnosticMessages; -+ unsigned int modemStateBitField[4]; -+#ifdef INTERNAL_BUILD -+ internalParameters internalVars; -+#endif -+} ITIDSLHW_T, *PITIDSLHW_T, tidsl_t; -+ -+ -+/********************************************************************************** -+* API proto type defines -+**********************************************************************************/ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_dslStartup -+* -+******************************************************************************************* -+* DESCRIPTION: Entry point to initialize and load ax5 daughter board -+* -+* INPUT: PITIDSLHW_T *ppIHw -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+* Notes: external function osAllocateMemory(), osZeroMemory(), osLoadFWImage() are required -+*****************************************************************************************/ -+int dslhal_api_dslStartup -+( -+ PITIDSLHW_T *ppIHw -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_gatherStatistics -+* -+********************************************************************************************* -+* DESCRIPTION: Read statistical infromation from ax5 modem daugter card. -+* Input: tidsl_t *ptidsl -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+ -+void dslhal_api_gatherStatistics -+( -+ tidsl_t * ptidsl -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_initStatistics -+* -+********************************************************************************************* -+* DESCRIPTION: init statistical infromation of ax5 modem daugter card. -+* -+* Input: tidsl_t *ptidsl -+* -+* Return: NULL -+* -+********************************************************************************************/ -+ -+void dslhal_api_initStatistics -+( -+ tidsl_t * ptidsl -+); -+ -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_getDslDriverVersion -+* -+******************************************************************************************* -+* DESCRIPTION: This routine supply DSL Driver version. -+* -+* INPUT: tidsl_t * ptidsl -+* void *pVer, DSP Driver Version Pointer -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* Note: See verdef_u.h for version structure definition. -+*****************************************************************************************/ -+ -+void dslhal_api_getDslHalVersion -+( -+ void *pVer -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_dslShutdown -+* -+******************************************************************************************* -+* DESCRIPTION: routine to shutdown ax5 modem and free the resource -+* -+* INPUT: tidsl_t *ptidsl -+* -+* RETURN: NULL -+* -+* Notes: external function osFreeMemory() is required. -+*****************************************************************************************/ -+ -+int dslhal_api_dslShutdown -+( -+ tidsl_t *ptidsl -+); -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_getDspVersion -+* -+******************************************************************************************* -+* DESCRIPTION: This routine supply AX5 daugther card DSP version. -+* -+* INPUT: tidsl_t * ptidsl -+* void *pVer, DSP version struct is returned starting at this pointer -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_api_getDspVersion -+( -+ tidsl_t *ptidsl, -+ void *pVer -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_digi_memTestA() -+* -+********************************************************************************************* -+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test, -+* memory tests on the external and internal memories of DSP, Codec Interconnect -+* test and Interrupt Test. -+* -+* Input: Test selects the test to be performed based on the elements set of 9 element -+* array passed the the parameter. -+* -+* Return: Status of the Tests Failed -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_digi_memTestA -+( -+unsigned int* Test -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_digi_memTestB() -+* -+********************************************************************************************* -+* DESCRIPTION: This function does the digital tests on the DSP. It does the DSP ID test, -+* memory tests on the external and internal memories of DSP, Codec Interconnect -+* test and Interrupt Test. -+* -+* Input: Test selects the digital test to be performed. -+* -+* Return: Status of the Tests Failed -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_digi_memTestB -+( -+unsigned int Test, -+unsigned int *Status -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_tonesTestA() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Array is a 64 element unsigned integer type array. The element of this array -+* describe which tones are to be generated by selecting the element of -+* the array to be non zero. -+* Return: NULL -+* -+********************************************************************************************/ -+ -+void dslhal_diags_anlg_tonesTestA -+( -+unsigned int Test, -+unsigned int* Array -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_tonesTestB() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Array is a 64 element unsigned integer type array. The element of this array -+* describe which tones are to be generated by selecting the element of -+* the array to be non zero. -+* Return: NULL -+* -+********************************************************************************************/ -+ -+void dslhal_diags_anlg_tonesTestB -+( -+unsigned int Test, -+unsigned int Tones -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_rxNoiseTest() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Tones selects the . -+* Return: NULL -+* -+********************************************************************************************/ -+ -+void dslhal_diags_anlg_rxNoiseTest -+(int agcFlag, -+short pga1, -+short pga2, -+short pga3, -+short aeq -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_ecNoiseTest() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Tones selects the . -+* Return: NULL -+* -+********************************************************************************************/ -+ -+void dslhal_diags_anlg_ecNoiseTest -+(int agcFlag, -+short pga1, -+short pga2, -+short pga3, -+short aeq -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_pollTrainingStatus() -+* -+********************************************************************************************* -+* DESCRIPTION: code to decode modem status and to start modem training -+* -+* Input: tidsl_t *ptidsl -+* -+* Return: 0-? status mode training -+* -1 failed -+* -+********************************************************************************************/ -+int dslhal_api_pollTrainingStatus -+( -+ tidsl_t *ptidsl -+); -+ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_handleTrainingInterrupt() -+* -+********************************************************************************************* -+* DESCRIPTION: Code to handle ax5 hardware interrupts -+* -+* Input: tidsl_t *ptidsl -+* int *pMsg, pointer to returned hardware messages. Each byte represent a messge -+* int *pTag, pointer to returned hardware message tags. Each byte represent a tag. -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+int dslhal_api_handleTrainingInterrupt -+( -+ tidsl_t *ptidsl, -+ int intrSource -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocSerialNumber(tidsl_t *ptidsl,char *SerialNumber) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the EOC Serial Number -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *SerialNumber : Input EOC Serial Number -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocSerialNumber -+( -+tidsl_t *ptidsl, -+char *SerialNumber -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocVendorId(tidsl_t *ptidsl,char *VendorID) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the EOC Serial Number -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *VendorID : EOC Vendor ID -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocVendorId -+( -+tidsl_t *ptidsl, -+char *VendorID -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setEocRevisionNumber(tidsl_t *ptidsl,char *RevNum) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the EOC Revision Number -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *RevNum : Input EOC Revision Number -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setEocRevisionNumber -+( -+tidsl_t *ptidsl, -+char *RevNumber -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setAturConfig(tidsl_t *ptidsl,char *ATURConfig) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction Sets the EOC ATUR Config Register -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * char *RevNum : Input EOC ATUR Config Register -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setAturConfig -+( -+tidsl_t *ptidsl, -+char *ATURConfig -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_disableLosAlarm(tidsl_t *ptidsl, unsigned int set) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction disables all the LOS alarms -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int set // if set == TRUE : Disable LOS alarms, else enable -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * NOTES: Currently not supported in any version other than MR4 Patch release.. -+ *****************************************************************************************/ -+unsigned int dslhal_api_disableLosAlarm -+( -+tidsl_t *ptidsl, -+unsigned int -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendIdle(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_IDLE message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendIdle -+( -+tidsl_t *ptidsl -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendQuiet(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendQuiet -+( -+tidsl_t *ptidsl -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendDgasp(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the HOST_DGASP message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendDgasp -+( -+tidsl_t *ptidsl -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setMarginThreshold(tidsl_t *ptidsl, int threshold) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction does sets the Margin threshold -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * int threshold -+ * -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setMarginThreshold -+( -+tidsl_t *ptidsl, -+int threshold -+); -+ -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_setMarginMonitorFlags(tidsl_t *ptidsl, unsigned int trainflag,unsigned int shwtflag) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction does sets the Margin monitoring flag -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int trainflag -+ * unsigned int shwtflag -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_setMarginMonitorFlags -+( -+tidsl_t *ptidsl, -+unsigned int trainflag, -+unsigned int shwtflag -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setRateAdaptFlag(tidsl_t *ptidsl) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Rate Adapt Enable Flag -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int flag //if flag = TRUE set flag else reset -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setRateAdaptFlag -+( -+tidsl_t *ptidsl, -+unsigned int flag -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setTrellisFlag(tidsl_t *ptidsl, unsigned int flag) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Trellis Coding Enable Flag -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int flag //if flag = TRUE set flag else reset -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setTrellisFlag -+( -+tidsl_t *ptidsl, -+unsigned int flag -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setMaxBitsPerCarrier(tidsl_t *ptidsl,unsigned int maxbits) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Maximum bits per carrier value -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int maxbits : should be a value between 0-15 -+* -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setMaxBitsPerCarrier -+( -+tidsl_t *ptidsl, -+unsigned int maxbits -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setMaxInterleaverDepth(tidsl_t *ptidsl,unsigned int maxdepth) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the Maximum Interleave Depth Supported -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int maxdepth : Should be between 0 and 3 depending on intlv buffer -+* size 64-512 -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+unsigned int dslhal_api_setMaxInterleaverDepth -+( -+tidsl_t *ptidsl, -+unsigned int maxdepth -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_api_setTrainingMode(tidsl_t *ptidsl,unsigned int trainmode) -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction Sets the desired training mode(none/T1.413/G.dmt/G.lite) -+* -+* INPUT: PITIDSLHW_T *ptidsl -+* unsigned int trainmode :Should be between 0 and 4; 0:No Mode 1:Multimode -+* 2: T1.413, 3:G.dmt, 4: G.lite -+* RETURN: 0 SUCCESS -+* 1 FAILED -+* -+*****************************************************************************************/ -+ -+unsigned int dslhal_api_setTrainingMode -+( -+tidsl_t *ptidsl, -+unsigned int trainmode -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_dslRetrain(tidsl_t *ptidsl) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_dslRetrain -+( -+tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_acknowledgeInterrupt() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_acknowledgeInterrupt -+(tidsl_t * ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_disableDspHybridSelect() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_disableDspHybridSelect -+(tidsl_t * ptidsl, -+ unsigned int disable -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_disableDspHybridSelect() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_selectHybrid -+(tidsl_t * ptidsl, -+ unsigned int hybridNum -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_reportHybridMetrics() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_reportHybridMetrics -+(tidsl_t * ptidsl, -+ int *metric -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_selectInnerOuterPair(tidsl_t *ptidsl, unsigned int pairSelect) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+ -+unsigned int dslhal_api_selectInnerOuterPair -+(tidsl_t *ptidsl, -+unsigned int pairSelect -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_resetTrainFailureLog(tidsl_t *ptidsl, unsigned int pairSelect) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the CMD_QUIET message to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+ -+unsigned int dslhal_api_resetTrainFailureLog -+(tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_controlLed() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureLed -+(tidsl_t * ptidsl, -+unsigned int idLed, -+unsigned int onOff -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureExternBert() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureExternBert -+(tidsl_t * ptidsl, -+unsigned int configParm, -+unsigned int parmVal -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureAtmBert() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureAtmBert -+(tidsl_t * ptidsl, -+unsigned int configParm, -+unsigned int parmVal -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_configureDgaspLpr() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_configureDgaspLpr -+(tidsl_t * ptidsl, -+unsigned int configParm, -+unsigned int parmVal -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_onOffPcb() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_onOffPcb -+(tidsl_t * ptidsl, -+unsigned int onOff -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_onOffBitSwap() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Turns on / off the power cutback feature; -+* Input -+* usDs; 0 = us and 1 = ds; -+* onOff; 0 = OFF and 1 = ON -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_onOffBitSwap -+(tidsl_t * ptidsl, -+ unsigned int usDs, -+ unsigned int onOff -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_configDsTones() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Turns on / off specific tones in the downstream direction; -+* Input -+* pointer to the array specifying the tones to be turned on/off -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_configDsTones -+(tidsl_t * ptidsl, -+ unsigned int *dsTones -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_getAocBitSwapBuffer() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Fetches the Tx/Rx AOC bitswap Buffer; -+* Input -+* Transmit / Receive buffer to be fetched -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_getAocBitswapBuffer -+(tidsl_t * ptidsl, -+unsigned int usDs -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_readTrainingMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads all the training messages on demand; -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* void *msgStruct : Pointer to Message Structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_readTrainingMessages -+(tidsl_t * ptidsl, -+void *msgPtr -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_getTrainingState() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads all the training messages on demand; -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* void *msgStruct : Pointer to training state structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_getTrainingState -+(tidsl_t * ptidsl, -+void *statePtr -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_resetBitSwapMessageLog() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Clears the Aoc Bitswap Message Log -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* unsigned int usDs ; Upstream=0, Downstream=1 -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_resetBitSwapMessageLog -+(tidsl_t * ptidsl, -+ unsigned int usDs -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_setConstellationBinNumber() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Specifies the bin number for which constellation data should be fetched -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* unsigned int binNum : constellation bin number whose data is required -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_setConstellationBinNumber -+(tidsl_t * ptidsl, -+ unsigned int binNum -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_resetTrainStateHistory() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Clears the Training State History Log -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_resetTrainStateHistory -+(tidsl_t * ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_getSnrPerBin() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Get SNR data per bin -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_getSnrPerBin -+(tidsl_t * ptidsl, -+ unsigned int snrBufferOpt -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_logEocMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Logs EOC messages sent by the Modem to the CO -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* unsigned int eocLowerBytes : Lower [1-5] bits of EOC Message -+* unsigned int eocUpperBytes : Upper [6-13] bits of EOC Message -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_logEocMessages -+(tidsl_t * ptidsl, -+ unsigned int usDs, -+ unsigned int eocLowerBytes, -+ unsigned int eocUpperBytes -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_getReasonForDrop() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads the reason for dropping DSL connection; -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+ -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_getReasonForDrop -+(tidsl_t * ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_ctrlMaxAvgFineGains() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Turns on / off the host control for Max Avg Fine Gains; 0 = OFF and 1 = ON -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_ctrlMaxAvgFineGains -+(tidsl_t * ptidsl, -+unsigned int onOff -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_setMaxAvgFineGain() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Set the Maximum Average Fine Gain Value -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_setMaxAvgFineGain -+(tidsl_t * ptidsl, -+ short fineGain -+); -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_readPhySettings() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads the advanced Phy layer settings on demand; -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* void *cfgStruct : Pointer to Phy Config Structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_readPhySettings -+(tidsl_t * ptidsl, -+void *cfgPtr -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_advcfg_setBlackOutBits() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the Blackout Bits in the RMSGPCB message -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_advcfg_setBlackOutBits -+(tidsl_t * ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_genericDspRead() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads from a generic location in the host interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_genericDspRead -+(tidsl_t * ptidsl, -+ unsigned int offset1, -+ unsigned int offset2, -+ unsigned int offset3, -+ unsigned char* localBuffer, -+ unsigned int numBytes -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_genericDspWrite() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Writes to a generic location in the host interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_genericDspWrite -+(tidsl_t * ptidsl, -+ unsigned int offset1, -+ unsigned int offset2, -+ unsigned int offset3, -+ unsigned char* localBuffer, -+ unsigned int numBytes -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_dspInterfaceRead() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reads from a generic location in the host interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_dspInterfaceRead -+(tidsl_t * ptidsl, -+ unsigned int baseAddr, -+ unsigned int numOffsets, -+ unsigned int *offsets, -+ unsigned char* localBuffer, -+ unsigned int numBytes -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_api_dspInterfaceWrite() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Writes to a generic location in the host interface -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_api_dspInterfaceWrite -+(tidsl_t * ptidsl, -+ unsigned int baseAddr, -+ unsigned int numOffsets, -+ unsigned int *offsets, -+ unsigned char* localBuffer, -+ unsigned int numBytes -+); -+ -+/****************************************************************************************** -+ * FUNCTION NAME: dslhal_api_sendMailboxCommand(tidsl_t *ptidsl, unsigned int cmd) -+ * -+ ******************************************************************************************* -+ * DESCRIPTION: This fuction sends the passed mailbox command to the DSP -+ * -+ * INPUT: PITIDSLHW_T *ptidsl -+ * unsigned int cmd -+ * -+ * RETURN: 0 SUCCESS -+ * 1 FAILED -+ * -+ *****************************************************************************************/ -+unsigned int dslhal_api_sendMailboxCommand -+(tidsl_t *ptidsl, -+unsigned int cmd -+); -+ -+#ifdef INTERNAL_BUILD -+#include <dsl_hal_internal_api.h> -+#endif -+ -+ -+#endif /* pairs #ifndef __DSL_APPLICATION_INTERFACE_H__ */ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h ---- linux.old/drivers/atm/sangam_atm/dsl_hal_logtable.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_logtable.h 2005-08-23 04:46:50.097843696 +0200 -@@ -0,0 +1,259 @@ -+unsigned int log10[]= -+{ -+ 0, -+ 771, -+ 1221, -+ 1541, -+ 1789, -+ 1992, -+ 2163, -+ 2312, -+ 2443, -+ 2560, -+ 2666, -+ 2763, -+ 2852, -+ 2934, -+ 3011, -+ 3083, -+ 3150, -+ 3213, -+ 3274, -+ 3331, -+ 3385, -+ 3437, -+ 3486, -+ 3533, -+ 3579, -+ 3622, -+ 3664, -+ 3705, -+ 3744, -+ 3781, -+ 3818, -+ 3853, -+ 3887, -+ 3921, -+ 3953, -+ 3984, -+ 4015, -+ 4044, -+ 4073, -+ 4101, -+ 4129, -+ 4156, -+ 4182, -+ 4207, -+ 4232, -+ 4257, -+ 4281, -+ 4304, -+ 4327, -+ 4349, -+ 4371, -+ 4393, -+ 4414, -+ 4435, -+ 4455, -+ 4475, -+ 4495, -+ 4514, -+ 4533, -+ 4552, -+ 4570, -+ 4589, -+ 4606, -+ 4624, -+ 4641, -+ 4658, -+ 4675, -+ 4691, -+ 4707, -+ 4723, -+ 4739, -+ 4755, -+ 4770, -+ 4785, -+ 4800, -+ 4815, -+ 4829, -+ 4844, -+ 4858, -+ 4872, -+ 4886, -+ 4899, -+ 4913, -+ 4926, -+ 4939, -+ 4952, -+ 4965, -+ 4978, -+ 4990, -+ 5003, -+ 5015, -+ 5027, -+ 5039, -+ 5051, -+ 5063, -+ 5075, -+ 5086, -+ 5098, -+ 5109, -+ 5120, -+ 5131, -+ 5142, -+ 5153, -+ 5164, -+ 5174, -+ 5185, -+ 5195, -+ 5206, -+ 5216, -+ 5226, -+ 5236, -+ 5246, -+ 5256, -+ 5266, -+ 5275, -+ 5285, -+ 5295, -+ 5304, -+ 5313, -+ 5323, -+ 5332, -+ 5341, -+ 5350, -+ 5359, -+ 5368, -+ 5377, -+ 5386, -+ 5394, -+ 5403, -+ 5412, -+ 5420, -+ 5429, -+ 5437, -+ 5445, -+ 5454, -+ 5462, -+ 5470, -+ 5478, -+ 5486, -+ 5494, -+ 5502, -+ 5510, -+ 5518, -+ 5525, -+ 5533, -+ 5541, -+ 5548, -+ 5556, -+ 5563, -+ 5571, -+ 5578, -+ 5586, -+ 5593, -+ 5600, -+ 5607, -+ 5614, -+ 5622, -+ 5629, -+ 5636, -+ 5643, -+ 5649, -+ 5656, -+ 5663, -+ 5670, -+ 5677, -+ 5683, -+ 5690, -+ 5697, -+ 5703, -+ 5710, -+ 5716, -+ 5723, -+ 5729, -+ 5736, -+ 5742, -+ 5749, -+ 5755, -+ 5761, -+ 5767, -+ 5773, -+ 5780, -+ 5786, -+ 5792, -+ 5798, -+ 5804, -+ 5810, -+ 5816, -+ 5822, -+ 5828, -+ 5834, -+ 5839, -+ 5845, -+ 5851, -+ 5857, -+ 5862, -+ 5868, -+ 5874, -+ 5879, -+ 5885, -+ 5891, -+ 5896, -+ 5902, -+ 5907, -+ 5913, -+ 5918, -+ 5924, -+ 5929, -+ 5934, -+ 5940, -+ 5945, -+ 5950, -+ 5955, -+ 5961, -+ 5966, -+ 5971, -+ 5976, -+ 5981, -+ 5986, -+ 5992, -+ 5997, -+ 6002, -+ 6007, -+ 6012, -+ 6017, -+ 6022, -+ 6027, -+ 6031, -+ 6036, -+ 6041, -+ 6046, -+ 6051, -+ 6056, -+ 6060, -+ 6065, -+ 6070, -+ 6075, -+ 6079, -+ 6084, -+ 6089, -+ 6093, -+ 6098, -+ 6103, -+ 6107, -+ 6112, -+ 6116, -+ 6121, -+ 6125, -+ 6130, -+ 6134, -+ 6139, -+ 6143, -+ 6148, -+ 6152, -+ 6156, -+ 6161, -+ 6165 -+ }; -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_register.h linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h ---- linux.old/drivers/atm/sangam_atm/dsl_hal_register.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_register.h 2005-08-23 04:46:50.097843696 +0200 -@@ -0,0 +1,337 @@ -+#ifndef ___DSL_REGISTER_DEFINES_H___ -+#define ___DSL_REGISTER_DEFINES_H___ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: DSL HAL H/W Registers and Constant Declarations for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_hal_register.h -+* -+* DESCRIPTION: -+* Contains DSL HAL APIs for Adam2 OS functions -+* -+* -+* (C) Copyright 2001-02, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 06Feb03 0.00.00 RamP Created -+* 21Mar03 0.00.01 RamP Changed header files for Modular -+* build framework -+* 21Mar03 0.00.02 RamP Introduced malloc size for DSP f/w -+* 07Apr03 0.00.03 RamP Implemented new error reporting scheme -+* Changed Commenting to C style only -+* 12Apr03 0.00.04 RamP Added Interrupt Mask defines -+* 14Apr03 0.00.05 RamP Renamed macros for REG8, REG16 & REG32 -+* 21Apr03 0.01.00 RamP Added Interrupt source/clear registers -+* Changed enum RSTATE_SHOWTIME to 5 -+* 24Apr03 0.01.01 RamP Moved the RSTATE enum to api.h -+* Added olay recovery error condition -+* 14May03 0.01.02 RamP Added defines for power computation -+* Added error condition for hybrids -+* 04Jun03 0.01.03 RamP Added enum for config flags, -+* Cleaned up AR5 register defines -+* Added defines for higher data rate -+* 06Jun03 0.01.04 RamP Added error & interrupt defines -+* 09Jun03 0.01.05 RamP Modified enum for current config -+* Added additional C-Rates defines -+* 18Jul03 0.01.06 RamP Modified internal build flow -+* 21Aug03 0.01.07 RamP Added constellation buffer size -+* 08Oct03 0.01.08 RamP Added us/ds Bits n gains size -+* 12Oct03 0.01.08 RamP Added ADSL2 Message sizes, lengths -+* and offsets for various formats -+* 29Oct03 0.01.09 RamP Added ADSL2 Delt offsets & sizes -+* 24Nov03 0.01.10 RamP Added bit field number, scan vector -+* 26Dec03 0.01.11 RamP Removed the oamFeature masks to api.h -+*******************************************************************************/ -+ -+#include "env_def_typedefs.h" -+#ifdef INTERNAL_BUILD -+#include "dev_host_internalinterface.h" -+#endif -+#include "dev_host_interface.h" -+#include "dsl_hal_api.h" -+ -+#define ADSLSS_BASE 0x01000000 -+#define BBIF_BASE 0x02000000 -+ -+#define ADSLSSADR (BBIF_BASE+0x0000) -+#define ADSLSSADRMASK 0xff000000 -+#define WAKEUP_DSP 0x00000001 -+ -+/* Ax7 Reset Control */ -+ -+#define RST_CNTRL_BASE 0x8611600 -+#define RST_CNTRL_PRCR (RST_CNTRL_BASE + 0x00 ) -+ -+#define RST_CNTRL_PRCR_GPIO 0x00000040 -+#define RST_CNTRL_PRCR_ADSLSS 0x00000080 -+#define RST_CNTRL_PRCR_USB 0x00000100 -+#define RST_CNTRL_PRCR_SAR 0x00000200 -+#define RST_CNTRL_PRCR_DSP 0x00800000 -+#define RST_CNTRL_PRCR_EMAC1 0x00200000 /* EMAC1 reset */ -+ -+#define RST_CNTRL_SWRCR (RST_CNTRL_BASE + 0x04 ) -+#define RST_SWRCR_SWR0 0x00000001 -+#define RST_SWRCR_SWR1 0x00000002 -+ -+#define RST_CNTRL_RSR (TNETD53XX_RST_CNTRL_BASE + 0x08 ) -+#define RST_RSR_RSCAUSE 0x00000003 /* Software Reset Caused by writing to SWR1 bit */ -+ -+ -+/* ****************************************************** -+Interrupt sources on Ax7 interrupt controller. -+The reserved sources are noted. -+********************************************************* */ -+ -+#define INTR_CNTRL_SRC_SECOND 0 -+#define INTR_CNTRL_SRC_EXTERNAL0 1 -+#define INTR_CNTRL_SRC_EXTERNAL1 2 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_TIMER0 5 -+#define INTR_CNTRL_SRC_TIMER1 6 -+#define INTR_CNTRL_SRC_UART0 7 -+#define INTR_CNTRL_SRC_UART1 8 -+#define INTR_CNTRL_SRC_DMA0 9 -+#define INTR_CNTRL_SRC_DMA1 10 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_SAR 15 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_EMAC0 19 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_VLYNQ0 21 -+#define INTR_CNTRL_SRC_CODEC_WAKE 22 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_USB 24 -+#define INTR_CNTRL_SRC_VLYNQ1 25 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_EMAC1 28 -+#define INTR_CNTRL_SRC_I2C 29 -+#define INTR_CNTRL_SRC_DMA2 30 -+#define INTR_CNTRL_SRC_DMA3 31 -+/* reserved sources ... */ -+#define INTR_CNTRL_SRC_VDMA_RX 37 -+#define INTR_CNTRL_SRC_VDMA_TX 38 -+#define INTR_CNTRL_SRC_ADSLSS 39 -+ -+#ifndef K0BASE -+#define K0BASE 0x80000000 -+#endif -+ -+#ifndef K1BASE -+#define K1BASE 0xA0000000 -+#endif -+ -+#ifndef PHYS_ADDR -+#define PHYS_ADDR(X) ((X) & 0X1FFFFFFF) -+#endif -+ -+#ifndef PHYS_TO_K0 -+#define PHYS_TO_K0(X) (PHYS_ADDR(X)|K0BASE) -+#endif -+ -+#ifndef PHYS_TO_K1 -+#define PHYS_TO_K1(X) (PHYS_ADDR(X)|K1BASE) -+#endif -+ -+#ifndef DSLHAL_REG8 -+#define DSLHAL_REG8( addr ) (*(volatile unsigned short *) PHYS_TO_K1(addr)) -+#endif -+ -+#ifndef DSLHAL_REG16 -+#define DSLHAL_REG16( addr ) (*(volatile unsigned short *)PHYS_TO_K1(addr)) -+#endif -+ -+#ifndef DSLHAL_REG32 -+#define DSLHAL_REG32( addr ) (*(volatile unsigned int *)PHYS_TO_K1(addr)) -+#endif -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#ifndef TRUE -+#define TRUE (1==1) -+#endif -+ -+#ifndef FALSE -+#define FALSE (1==2) -+#endif -+ -+/******************************************************************************* -+* Type Defines for Library -+********************************************************************************/ -+typedef unsigned int size_t; -+ -+#define TIDSL_HW_CREATED 0x00000001 -+#define TIDSL_HW_OPENED 0x00000002 -+#define TIDSL_HW_STARTED 0x00000004 -+#define TIDSL_OS_INITIALIZED 0x00000008 -+ -+/* Data Pump CRATES Table Defines */ -+#define SIZE_OF_CRATES1_TABLE 120 -+#define CRATES1_BF_LS0 7 -+#define CRATES1_BI_LS0 17 -+#define CRATES1_BF_AS0 0 -+#define CRATES1_BI_AS0 10 -+#define CRATES1_BF_DSRS 20 -+#define CRATES1_BI_DSRS 21 -+#define CRATES1_BFI_DSS 22 -+#define CRATES1_BFI_DSI 23 -+#define CRATES1_BF_USRS 25 -+#define CRATES1_BI_USRS 26 -+#define CRATES1_BFI_USS 27 -+#define CRATES1_BFI_USI 28 -+ -+#define FAST_PATH 0 -+#define INTERLEAVED_PATH 1 -+ -+#define LINE_NOT_CONNECTED 0 -+#define LINE_CONNECTED 1 -+#define LINE_DISCONNECTED 2 -+#define LINE_NOT_TO_CONNECT 3 -+ -+#define MAXSECTIONS 125 -+ -+/***************************************************************************************** -+ * Localstructure declarations -+ * -+ ****************************************************************************************/ -+enum -+{ -+ DSLHAL_ERROR_NO_ERRORS, /* 00 */ -+ DSLHAL_ERROR_UNRESET_ADSLSS, /* 01 */ -+ DSLHAL_ERROR_RESET_ADSLSS, /* 02 */ -+ DSLHAL_ERROR_UNRESET_DSP, /* 03 */ -+ DSLHAL_ERROR_RESET_DSP, /* 04 */ -+ DSLHAL_ERROR_NO_FIRMWARE_IMAGE, /* 05 */ -+ DSLHAL_ERROR_MALLOC, /* 06 */ -+ DSLHAL_ERROR_FIRMWARE_MALLOC, /* 07 */ -+ DSLHAL_ERROR_DIAG_MALLOC, /* 08 */ -+ DSLHAL_ERROR_OVERLAY_MALLOC, /* 09 */ -+ DSLHAL_ERROR_CODE_DOWNLOAD, /* 10 */ -+ DSLHAL_ERROR_DIAGCODE_DOWNLOAD, /* 11 */ -+ DSLHAL_ERROR_BLOCK_READ, /* 12 */ -+ DSLHAL_ERROR_BLOCK_WRITE, /* 13 */ -+ DSLHAL_ERROR_MAILBOX_READ, /* 14 */ -+ DSLHAL_ERROR_MAILBOX_WRITE, /* 15 */ -+ DSLHAL_ERROR_MAILBOX_NOMAIL, /* 16 */ -+ DSLHAL_ERROR_MAILBOX_OVERFLOW, /* 17 */ -+ DSLHAL_ERROR_INVALID_PARAM, /* 18 */ -+ DSLHAL_ERROR_ADDRESS_TRANSLATE, /* 19 */ -+ DSLHAL_ERROR_FIRMWARE_CRC, /* 20 */ -+ DSLHAL_ERROR_FIRMWARE_OFFSET, /* 21 */ -+ DSLHAL_ERROR_CONFIG_API_FAILURE, /* 22 */ -+ DSLHAL_ERROR_EOCREG_API_FAILURE, /* 23 */ -+ DSLHAL_ERROR_VERSION_API_FAILURE, /* 24 */ -+ DSLHAL_ERROR_STATS_API_FAILURE, /* 25 */ -+ DSLHAL_ERROR_MARGIN_API_FAILURE, /* 26 */ -+ DSLHAL_ERROR_CTRL_API_FAILURE, /* 27 */ -+ DSLHAL_ERROR_HYBRID_API_FAILURE, /* 28 */ -+ DSLHAL_ERROR_MODEMENV_API_FAILURE, /* 29 */ -+ DSLHAL_ERROR_INTERRUPT_FAILURE, /* 30 */ -+ DSLHAL_ERROR_INTERNAL_API_FAILURE, /* 31 */ -+ DSLHAL_ERROR_DIGIDIAG_FAILURE, /* 32 */ -+ DSLHAL_ERROR_TONETEST_FAILURE, /* 33 */ -+ DSLHAL_ERROR_NOISETEST_FAILURE, /* 34 */ -+ DSLHAL_ERROR_MODEMSTATE, /* 35 */ -+ DSLHAL_ERROR_OVERLAY_CORRUPTED /* 36 */ -+}; -+ -+enum -+{ -+ CONFIG_FLAG_NOFLAG, /* 00 */ -+ CONFIG_FLAG_TRELLIS, /* 01 */ -+ CONFIG_FLAG_EC, /* 02 */ -+ CONFIG_FLAG_RS /* 03 */ -+}; -+ -+#define USE_EMIF_REV 0 -+#define USE_CVR_REV 1 -+#define TNETD53XX_MAXLOOP 10000 -+#define REVERB 0 -+#define MEDLEY 1 -+#define NONINTENSE 0 -+#define slavespace0 0xa1000000 -+ -+#define MASK_MAILBOX_INTERRUPTS 0x00000001 -+#define MASK_BITFIELD_INTERRUPTS 0x00000002 -+#define MASK_HEARTBEAT_INTERRUPTS 0x00000004 -+#define DSP_INTERRUPT_SOURCE_REGISTER 0x020007A0 -+#define DSP_INTERRUPT_CLEAR_REGISTER 0x020007A4 -+ -+#define DIGITAL_DIAG_MEMSIZE 1048576 -+#define CRC32_QUOTIENT 0x04c11db7 -+#define DSP_FIRMWARE_MALLOC_SIZE 0x7ffff -+#define DSP_CONSTELLATION_BUFFER_SIZE 1024*4 -+#define LOG43125 9303 -+#define US_NOMINAL_POWER (-38) -+#define US_BNG_LENGTH 32 -+#define DS_BNG_LENGTH 256 -+#define NUMBER_OF_BITFIELDS 4 -+#define BITFIELD_SCAN 0x80000000 -+ -+/* ADSL Message offsets from Host Interface Pointer */ -+ -+/* ADSL2 Messages Index and Length defines */ -+ -+#define CMSGFMT_INDEX 0 -+#define CMSGPCB_INDEX 1 -+#define RMSGFMT_INDEX 2 -+#define RMSGPCB_INDEX 3 -+#define RMSG1LD_INDEX 13 -+#define RMSG2LD_INDEX 14 -+#define RMSG3LD_INDEX 15 -+#define RMSG4LD_INDEX 16 -+#define RMSG5LD_INDEX 17 -+#define RMSG6LD_INDEX 18 -+#define RMSG7LD_INDEX 19 -+#define RMSG8LD_INDEX 20 -+#define RMSG9LD_INDEX 21 -+#define CMSG1LD_INDEX 22 -+#define CMSG2LD_INDEX 23 -+#define CMSG3LD_INDEX 24 -+#define CMSG4LD_INDEX 25 -+#define CMSG5LD_INDEX 26 -+#define CMSGPCB2_INDEX 28 -+#define CMSGPCB2L_INDEX 29 -+#define RMSGFMT2_INDEX 30 -+#define RMSGPCB2L_INDEX 31 -+#define CMSG1ADSL2_INDEX 32 -+#define RMSG1ADSL2_INDEX 33 -+#define CMSG2ADSL2_INDEX 34 -+#define RMSG2ADSL2_INDEX 35 -+#define CPARAMS_INDEX 36 -+#define RPARAMS_INDEX 37 -+ -+/* ADSL2 Message Sizes */ -+ -+#define CMSGFMT_SIZE 2 -+#define RMSGFMT_SIZE 2 -+#define CMSGPCB_SIZE 2 -+#define CMSGPCB2_SIZE 6 /* Annex A with Blackout */ -+#define CMSGPCB2L_SIZE 10 /* Annex B with Blackout */ -+#define RMSGPCB_SIZE 36 -+#define RMSG1LD_SIZE 16 -+#define RMSGxLD_SIZE 258 -+#define CMSG1LD_SIZE 16 -+#define CMSG2LD_SIZE 130 -+#define CMSG3LD_SIZE 66 -+#define CMSG4LD_SIZE 34 -+#define CMSG5LD_SIZE 34 -+#define CMSG1ADSL2_SIZE 24 -+#define RMSG1ADSL2_SIZE 4 -+#define CMSG2ADSL2_SIZE 4 -+#define RMSG2ADSL2_SIZE 32 -+#define CPARAMS_SIZE 136 -+#define RPARAMS_SIZE 808 -+ -+/* ADSL2 Plus Message Sizes (if Different from ADSL2) */ -+ -+#define RMSGPCB_P_SIZE 68 -+#define CMSG1ADSL2P_SIZE 40 /* With Blackout */ -+#define CPARAMS_PA_SIZE 168 -+#define RPARAMS_PA_SIZE 2088 -+#define CPARAMS_PB_SIZE 296 -+#define RPARAMS_PB_SIZE 2088 -+ -+#endif /* pairs #ifndef ___DSL_REGISTER_DEFINES_H___ */ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.c linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c ---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.c 2005-08-23 04:46:50.100843240 +0200 -@@ -0,0 +1,2788 @@ -+/******************************************************************************* -+* FILE PURPOSE: DSL Driver API functions for Sangam -+********************************************************************************* -+* FILE NAME: dsl_hal_support.c -+* -+* DESCRIPTION: -+* Contains DSL HAL APIs for Modem Control -+* -+* -+* (C) Copyright 2001-02, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 06Feb03 0.00.00 RamP Created -+* 21Mar03 0.00.01 RamP Inserted byteswap functions -+* 07Apr03 0.00.02 RamP Implemented new error reporting scheme -+* Changed Commenting to C style only -+* 12Apr03 0.00.03 RamP Added function to set Interrupt Bit -+* Masks for bitfield & Mailboxes -+* 14Apr03 0.00.04 RamP Added function to process modem state -+* bit fields; renamed REG32 macros -+* Changed interrupt bit field settings -+* 15Apr03 0.00.05 RamP Fixed exit condition on dslShutdown -+* 21Apr03 0.01.00 RamP Fixed dslShutdown function & changed -+* loop counter for overlay byteswaps -+* (Alpha) Added cache writeback for overlays -+* Added function acknowledgeInterrupt -+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt into api -+* 24Apr03 0.01.02 RamP Added function to compare crc32 with -+* pre-computed value as a recovery -+* scheme for corrupt overlay pages -+* 28Apr03 0.01.03 RamP Fixed a parameter in crc32 fxn call -+* 05May03 0.01.04 RamP Fixed Message structure access in -+* writeHostMailbox function -+* 14May03 0.01.05 RamP Lookup to netService of dsp version -+* (alpha ++) to determine pots/isdn service -+* 21May03 0.01.06 RamP Added support for CO profiles -+* 29May03 0.01.07 RamP Added critical section tabs for block -+* read/write operations -+* Added functions to reload overlay pages -+* and CO Profiles -+* 04Jun03 0.01.08 RamP Added state transition timing counters -+* 06Jun03 0.01.09 RamP Added Interrupt source parsing function -+* Interrupt masking for heartbeat added -+* 09Jun03 0.01.10 RamP Modified modem state bit field processing -+* for structure changes in ITIDSLHW -+* fixed problem in free memory for CO prof -+* 18Jul03 0.01.11 RamP Optimized free memory for CO profiles & -+* overlay pages in the supporting APIs -+* 28Jul03 0.02.00 RamP Modified the process bitfield functn -+* for LED & Application State report -+* 21Aug03 0.03.00 RamP Added logic to allocate & communicate -+* memory for constellation buffer display -+* 29Sep03 0.03.01 RamP Added API switch calls to advcfg module -+* to abstract them from the API module -+* 12Oct03 0.03.02 RamP Added API to gather ADSL2 Messages -+* 14Oct03 0.03.03 RamP Added function to read CMsgsRA -+* 23Oct03 0.03.04 RamP Changed train history index to circular -+* buffer upon rollover -+* 29Oct03 0.03.05 RamP Added Adsl2 Delt Message Parsing -+* 12Nov03 0.03.06 RamP Fixed endianness issues with -+* Constellation Display -+* 14Nov03 0.03.07 RamP Added function to gather CRates1/RRates1 -+* before they get overwritten by CRatesRA -+* 19Nov03 0.03.08 JohnP Revised dslhal_support_aocBitSwapProcessing to -+* prevent duplicate ATU-R bitswaps going to ACT -+* 24Nov03 0.03.09 RamP Implemented detailed State Tracking through -+* Modem State bit fields for ADSL/2 -+* 12Dec03 0.03.10 RamP Tokenized advanced configuration code -+* 12Dec03 0.03.11 RamP Added state reset upon IDLE -+* 19Dec03 0.03.12 RamP Added static adsl2 byteswap function for -+* handling pointer to pointer cases -+* Changed adsl2 messages to correct pointer to -+* pointer dereferencing problems in some OS -+* 26Dec03 0.03.13 RamP Setting Current Address for Constellation -+* buffer in addition to start address -+* Added additional check to overlay page malloc -+*******************************************************************************/ -+#include "dsl_hal_register.h" -+#include "dsl_hal_support.h" -+ -+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_unresetDslSubsystem -+* -+******************************************************************************************* -+* DESCRIPTION: This function unreset Dsl Subsystem -+* -+* INPUT: None -+* -+* RETURN: 0 if Pass; 1 if Fail -+* -+*****************************************************************************************/ -+int dslhal_support_unresetDslSubsystem(void) -+{ -+ dprintf(4," dslhal_support_unresetDslSubsystem()\n"); -+ /* Put ADSLSS in to reset */ -+ DSLHAL_REG32(0xa8611a10) = 0x1; -+ shim_osClockWait(64); -+ dprintf(5,"Selected APLL Reg \n"); -+ -+ DSLHAL_REG32(0xa8610a90) = 0x4; -+ shim_osClockWait(64); -+ dprintf(5,"Enable Analog PLL \n"); -+ -+ DSLHAL_REG32(0xa8610a90) = 0x77fe; -+ shim_osClockWait(64); -+ dprintf(5,"Set PLL for DSP\n"); -+ -+ /* DSLHAL_REG32(0xa8611600) = 0x007f1bdf;*/ -+ DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS; -+ shim_osClockWait(64); -+ dprintf(5,"Brought ADSLSS out of Reset \n"); -+ -+ DSLHAL_REG32(0xa861090c) &= ~((1<<20)|(1<<21)|(1<<22)|(1<<23)|(1<<24)|(1<<25)); -+ shim_osClockWait(64); -+ dprintf(5,"Configured GPIO 20-25 for McBSP \n"); -+ -+ /*DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_ADSLSS;*/ -+ -+ -+ /* DSLHAL_REG32(0xa8611a04) = 0x00000001; -+ shim_osClockWait(64); */ -+ -+ dprintf(4," dslhal_support_unresetDslSubsystem done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_resetDslSubsystem -+* -+******************************************************************************************* -+* DESCRIPTION: This function unreset Dsl Subsystem -+* -+* INPUT: None -+* -+* RETURN: 0 if Pass; 1 if Fail -+* -+*****************************************************************************************/ -+int dslhal_support_resetDslSubsystem(void) -+{ -+ dprintf(4, "dslhal_support_resetDslSubsystem \n"); -+ /* Put ADSLSS into reset */ -+ DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_ADSLSS; -+ shim_osClockWait(64); -+ /* DSLHAL_REG32(0xa8611a04) = 0x00000000; -+ shim_osClockWait(64); */ -+ dprintf(4, "dslhal_support_resetDslSubsystem Done \n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_unresetDsp() -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction takes ax5 daugter board out of reset. -+* -+* INPUT: None -+* -+* RETURN: 0 --successful. -+* 1 --failed -+* -+*****************************************************************************************/ -+int dslhal_support_unresetDsp(void) -+{ -+#ifdef PRE_SILICON -+ /* unsigned char value; */ -+ int rc; -+ -+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_SRC_ADDR); -+ if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE) -+ { -+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n"); -+ return DSLHAL_ERROR_ADDRESS_TRANSLATE; -+ } -+ dprintf(5,"MDMA SRC: %08x\n", rc); -+ DSLHAL_REG32(rc) = 0x80000001; -+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_DST_ADDR); -+ if(rc==DSLHAL_ERROR_ADDRESS_TRANSLATE) -+ { -+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n"); -+ return DSLHAL_ERROR_ADDRESS_TRANSLATE; -+ } -+ dprintf(5,"MDMA DST: %08x\n", rc); -+ DSLHAL_REG32(rc) = 0x02090001; -+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)DEV_MDMA0_CTL_ADDR); -+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE) -+ { -+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n"); -+ return DSLHAL_ERROR_ADDRESS_TRANSLATE; -+ } -+ dprintf(5,"MDMA CTL: %08x\n", rc); -+ DSLHAL_REG32(rc) = (DEV_MDMA_START | DEV_MDMA_DST_INC | DEV_MDMA_SRC_INC | -+ DEV_MDMA_BURST1 | (1 << DEV_MDMA_LEN_SHF)); -+ /* statusMask = 0x00000010;*/ -+#else -+ dprintf(4, "dslhal_support_unresetDsp()\n"); -+ -+ /* Bring the DSP core out of reset */ -+ /* DSLHAL_REG32(0xa8611600) = 0x00ff1bdf; */ -+ DSLHAL_REG32(0xa8611600) |= RST_CNTRL_PRCR_DSP; -+ shim_osClockWait(64); -+ dprintf(5,"Brought DSP out of Reset \n"); -+ dprintf(6,"Current Contents of PRCR: 0x%x\n",(unsigned int)DSLHAL_REG32(0xa8611600)); -+ /* DSLHAL_REG32(0xa8611a0c) = 0x00000007; -+ shim_osClockWait(64); */ -+#endif -+ -+ dprintf(4, "dslhal_support_unresetDsp() done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_resetDsp() -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction takes ax5 daugter board into reset. -+* -+* INPUT: None -+* -+* RETURN: 0 --successful. -+* 1 --failed -+* -+*****************************************************************************************/ -+int dslhal_support_resetDsp(void) -+{ -+ dprintf(4, "dslhal_support_resetDsp \n"); -+ /* Put ADSLSS into reset */ -+ DSLHAL_REG32(0xa8611600) &= ~RST_CNTRL_PRCR_DSP; -+ shim_osClockWait(64); -+ dprintf(4, "dslhal_support_resetDsp Done \n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_hostDspAddressTranslate() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Maps ax5 daugter card dsp memory address to avalanche memory space -+* -+* Input: unsigned int addr, dsp memory address. -+* -+* Return: >=0, unsigned int, mapped Avalanche address(VBUS address). -+* -1, mapping failed -+* -+* -+********************************************************************************************/ -+/* static unsigned int bbifmap0,bbifmap1; */ -+ -+unsigned int dslhal_support_hostDspAddressTranslate( unsigned int addr ) -+{ -+ unsigned int addrMap; -+ /* This function should just be used to move the memory window of the ADSLSS */ -+ dprintf(5, "dslhal_support_hostDspAddressTranslate()\n"); -+ -+ /* select vbus to xbus memory */ -+ /* addrMap = addr & 0xff000000; */ -+ addrMap = addr & ADSLSSADRMASK; -+ -+ DSLHAL_REG32(ADSLSSADR) = addrMap; -+ -+ dprintf(6, "dslhal_support_hostDspAddressTranslate() done\n"); -+#ifdef PRE_SILICON -+ return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr))+ 0x00000100); -+ /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */ -+#else -+ return ((ADSLSS_BASE | (~ADSLSSADRMASK & addr))); -+ /* Added 0x100 for Pre-Silicon VLNQ offset.. to be removed for Silicon */ -+#endif -+ -+} -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_blockWrite -+* -+******************************************************************************************* -+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card -+* -+* INPUT: void *buffer, data need to written -+* void *adde, memory address to be written -+* size_t count, number of bytes to be written -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_support_blockWrite(void *buffer, void *addr, size_t count) -+{ -+ int rc, byteCnt=0; -+ unsigned char* ptr; -+ union -+ { -+ unsigned char *cptr; -+ short *sptr; -+ int *iptr; -+ } src; -+ union -+ { -+ int anint; /* DSP location */ -+ unsigned char *cptr; /* to avoid casts */ -+ } dst; -+ union -+ { -+ unsigned int anint; -+ unsigned char byte[4]; -+ }data,dword,sword; -+ -+ /* Enter Critical Section */ -+ shim_osCriticalEnter(); -+ -+ dprintf(6, "dslhal_support_blockWrite\n"); -+ -+ dprintf(6,"addr=0x%X, length=0x%X, buffer=0x%X\n", (unsigned int) addr, (unsigned int) count, (unsigned int)buffer); -+ -+ src.cptr = (unsigned char*) buffer; /* local buffer */ -+ dst.cptr = addr; /* DSP memory location */ -+ -+ /*Maps address first*/ -+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr); -+ dprintf(5, "NewAddr: %08x\n", rc); -+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE) -+ { -+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n"); -+ return DSLHAL_ERROR_ADDRESS_TRANSLATE; -+ } -+ -+ dst.cptr=(unsigned char *)rc; -+ -+ /* check wether address is at 32bits boundary */ -+ -+ if ((dst.anint & 0x3) && count) -+ { -+ sword.anint = *(unsigned int*)((unsigned int)src.cptr & 0xfffffffc); -+ dword.anint = DSLHAL_REG32((unsigned int)dst.cptr & 0xfffffffc); -+ sword.anint = (unsigned int) dslhal_support_byteSwap32(sword.anint); -+ dword.anint = (unsigned int) dslhal_support_byteSwap32(dword.anint); -+ ptr = (unsigned char *)((unsigned int)dst.cptr & 0xfffffffc); -+ -+ if((dst.anint & 3) ==3) /* last byte of a dword */ -+ { -+ dword.byte[3] = sword.byte[3]; -+ dst.anint++; /* bump the address by one */ -+ byteCnt++; -+ count--; -+ } -+ -+ if((dst.anint & 3) ==1) /* second byte */ -+ { -+ if(count>3) -+ { -+ dword.byte[3] = sword.byte[3]; -+ dst.anint++; -+ count--; -+ byteCnt++; -+ } -+ if(count>2) -+ { -+ dword.byte[2] = sword.byte[2]; -+ dst.anint++; -+ count--; -+ byteCnt++; -+ } -+ if(count) -+ { -+ dword.byte[1] = sword.byte[1]; -+ dst.anint++; -+ count--; -+ byteCnt++; -+ } -+ } -+ -+ if((dst.anint & 3) && (count >1)) -+ { -+ dword.byte[2] = sword.byte[2]; -+ dword.byte[3] = sword.byte[3]; -+ byteCnt+=2; -+ dst.anint += 2; /* bump the address by two */ -+ count -= 2; /* decrement the byte count by two */ -+ } -+ -+ if((dst.anint & 3) && (count==1)) -+ { -+ dword.byte[2] = sword.byte[2]; -+ dst.anint++; -+ byteCnt++; -+ count--; -+ } -+ src.cptr = (char *)((unsigned int)src.cptr & 0xfffffffc); /* fix 032802 */ -+ dword.anint = dslhal_support_byteSwap32(dword.anint); -+ DSLHAL_REG32((unsigned int)ptr) = dword.anint; -+ ptr = src.cptr; -+ for(rc=0;rc<count;rc++) -+ { -+ *ptr = *(ptr+byteCnt); -+ ptr++; -+ } -+ } -+ -+ /* the dst pointer should now be on a 32-bit boundary */ -+ -+ while (count > 3) -+ { -+ DSLHAL_REG32((unsigned int)dst.cptr) = dslhal_support_byteSwap32(*src.iptr); -+ src.iptr++; /* bump the data pointer by four */ -+ dst.anint += 4; /* bump the address by four */ -+ count -= 4; /* decrement the byte count by four */ -+ } -+ -+ /* write remaining bytes */ -+ if(count) -+ { -+ int i; -+ -+ data.anint= DSLHAL_REG32((unsigned int)dst.cptr); -+ data.anint=dslhal_support_byteSwap32(data.anint); -+ for (i=0; i< count; i++) -+ { -+ data.byte[i]=*(src.cptr+i); -+ } -+ data.anint=dslhal_support_byteSwap32(data.anint); -+ DSLHAL_REG32((unsigned int)dst.cptr) = data.anint; -+ src.cptr +=count; -+ dst.anint +=count; -+ count=0; -+ } -+ dprintf(6, "dslhal_support_blockWrite done\n"); -+ /* Exit Critical Section */ -+ shim_osCriticalExit(); -+ return DSLHAL_ERROR_NO_ERRORS; -+} /* end of dslhal_support_blockWrite() */ -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_blockRead -+* -+********************************************************************************************* -+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card -+* -+* INPUT: void *addr, memory address to be read -+* void *buffer, dat buffer to be filled with from memmory -+* size_t count, number of bytes to be written -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_support_blockRead(void *addr, void *buffer, size_t count) -+{ -+ int rc; -+ union -+ { -+ int anint; /* DSP location */ -+ char *cptr; /* to avoid casts */ -+ } src; -+ union -+ { -+ char byte[4]; -+ int anint; /* DSP data */ -+ } data; -+ union -+ { -+ char *cptr; -+ int *iptr; -+ } dst; -+ -+ /* Enter Critical Section */ -+ shim_osCriticalEnter(); -+ -+ dprintf(6,"dslhal_support_blockRead\n"); -+ -+ -+ src.cptr = addr; /* DSP memory location */ -+ dst.cptr = buffer; /* local buffer */ -+ -+ dprintf(6, "Read addr=0x%X, size=0x%X\n", (unsigned int)addr, count); -+ -+ -+ /*Maps address first*/ -+ rc=dslhal_support_hostDspAddressTranslate((unsigned int)addr); -+ if(rc== DSLHAL_ERROR_ADDRESS_TRANSLATE) -+ { -+ dprintf(1, "dslhal_support_hostDspAddressTranslate failed\n"); -+ return DSLHAL_ERROR_ADDRESS_TRANSLATE; -+ } -+ -+ src.cptr=(unsigned char *)rc; -+ -+ /********************************************** -+ * if the source is NOT on a 32-bit boundary * -+ * then we read the full word * -+ * and ignore the first part of it * -+ **********************************************/ -+ -+ if ((src.anint & 3) && count) -+ { -+ unsigned int anword; -+ -+ anword = DSLHAL_REG32((unsigned int)src.cptr & 0xfffffffc); -+ data.anint = dslhal_support_byteSwap32(anword); -+ -+ /************************************ -+ * there is no need for case 0 * -+ * notice that there are no breaks * -+ * each falls through to the next * -+ ************************************/ -+ -+ switch (src.anint & 3) -+ { -+ case 1: -+ /* use only byte[1-3] */ -+ *(dst.cptr++) = data.byte[1]; -+ src.anint++; -+ count--; -+ case 2: -+ /* use byte[2-3] */ -+ if (count) -+ { -+ *(dst.cptr++) = data.byte[2]; -+ src.anint++; -+ count--; -+ } -+ case 3: -+ /* use byte[3] */ -+ if (count) -+ { -+ *(dst.cptr++) = data.byte[3]; -+ src.anint++; -+ count--; -+ } -+ } -+ } -+ -+ /* the src pointer should now be on a 32-bit boundary */ -+ while (count > 3) -+ { -+ unsigned int anword; -+ -+ anword=DSLHAL_REG32((unsigned int)src.cptr); -+ -+ *dst.iptr = dslhal_support_byteSwap32(anword); -+ src.anint += 4; /* bump the address by four */ -+ dst.iptr++; /* bump the data pointer by four */ -+ count -= 4; /* decrement the byte count by four */ -+ } -+ -+ /******************************* -+ * if there's any count left * -+ * then we read the next word * -+ * and ignore the end of it * -+ *******************************/ -+ if (count) -+ { -+ unsigned int anword; -+ -+ anword= DSLHAL_REG32((unsigned int)src.cptr); -+ data.anint = dslhal_support_byteSwap32(anword); -+ -+ /************************************ -+ * there is no need for case 0 * -+ * notice that there are no breaks * -+ * each falls through to the next * -+ ************************************/ -+ switch (count) -+ { -+ case 1: -+ /* use byte[0] */ -+ *(dst.cptr++) = data.byte[0]; -+ src.anint++; -+ count--; -+ break; -+ case 2: -+ /* use byte[0-1] */ -+ *(dst.cptr++) = data.byte[0]; -+ *(dst.cptr++) = data.byte[1]; -+ src.anint +=2; -+ count -= 2; -+ break; -+ case 3: -+ /* use only byte[0-2] */ -+ *(dst.cptr++) = data.byte[0]; -+ *(dst.cptr++) = data.byte[1]; -+ *(dst.cptr++) = data.byte[2]; -+ src.anint +=3; -+ count -= 3; -+ break; -+ } -+ } -+ /* Exit Critical Section */ -+ shim_osCriticalExit(); -+ -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} /* end of dslhal_support_blockRead() */ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readDspMailbox -+* -+********************************************************************************************* -+* DESCRIPTION: Reads a message from the mailbox -+* -+* ARGUMENTS: int *pcmd Pointer to command read -+* -+* RETURNS: 0 if successful -+* 1 if no mail -+* NZ otherwise -+* -+*****************************************************************************************/ -+ -+int dslhal_support_readDspMailbox(tidsl_t *ptidsl, int *pcmd, int *ptag, int *pprm1, int *pprm2) -+{ -+ int rc; -+ int cmd; -+ int tag; -+ int prm1; -+ int prm2; -+ unsigned char dspOutInx; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_mailboxControl_t mailboxControl; -+ DEV_HOST_dspHostMsg_t dspMailboxMsg[DEV_HOST_DSPQUEUE_LENGTH]; -+ -+ dprintf(6,"dslhal_support_readDspMailbox\n"); -+ -+ /* get the DSP main pointer */ -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* Read in the command/response buffer */ -+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p); -+ -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, -+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* Change the endianness of the Mailbox Pointer */ -+ mailboxControl.dspMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.dspMsgBuf_p); -+ -+ rc = dslhal_support_blockRead((PVOID)mailboxControl.dspMsgBuf_p, -+ &dspMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_DSPQUEUE_LENGTH)); -+ -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ /* Extract the command/response message index */ -+ mailboxControl.hostInInx &= 7; -+ mailboxControl.hostOutInx &= 7; -+ mailboxControl.dspOutInx &= 7; -+ mailboxControl.dspInInx &= 7; -+ -+ -+ /* check for messages in the mailbox */ -+ -+ if (mailboxControl.dspOutInx == mailboxControl.dspInInx) -+ { -+ return DSLHAL_ERROR_MAILBOX_NOMAIL; -+ /* no messages to read */ -+ } -+ -+ /* use bDRESPOutInx as index to DRESPMsgBuf */ -+ -+ cmd = dspMailboxMsg[mailboxControl.dspOutInx].cmd; -+ tag = dspMailboxMsg[mailboxControl.dspOutInx].tag; -+ prm1= dspMailboxMsg[mailboxControl.dspOutInx].param1; -+ prm2= dspMailboxMsg[mailboxControl.dspOutInx].param2; -+ -+ mailboxControl.dspOutInx++; /* increment count */ -+ mailboxControl.dspOutInx &= 7; /* only two bits */ -+ -+ dspOutInx = mailboxControl.dspOutInx; -+ -+ /* Read in the command response buffer again to take care of changes */ -+ mailboxControl.dspOutInx = dspOutInx; -+ rc = dslhal_support_blockWrite(&mailboxControl.dspOutInx, -+ &dspOamSharedInterface.dspHostMailboxControl_p->dspOutInx, sizeof(BYTE)); -+ -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ -+ /* Is the input parameter address non-zero*/ -+ -+ if (pcmd) -+ { -+ *pcmd = cmd; -+ } -+ if (ptag) -+ { -+ *ptag = tag; -+ } -+ if (pprm1) -+ { -+ *pprm1 = prm1; -+ } -+ if (pprm2) -+ { -+ *pprm2 = prm2; -+ } -+ -+ dprintf(6,"dslhal_support_readDspMailbox done\n"); -+ dprintf(6,"cmd=%d, tag=%d\n", cmd, tag); -+ dprintf(6,"dslhal_support_readDspMailbox:cmd: 0x%x, tag=%d\n", cmd, tag); -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} /* end of dslhal_support_readDspMailbox() */ -+ -+/******************************************************************************************* -+* FUNCTION NAME: dslhal_support_writeHostMailbox -+* -+******************************************************************************************** -+* DESCRIPTION: Send a message to a mailbox -+* -+* ARGUMENTS: int cmd command to write -+* int tag tag (currently unused) -+* int p1 parameter 1 (currently unused) -+* int p2 parameter 2 (currently unused) -+* -+* RETURNS: 0 if successful -+* NZ otherwise -+* -+*******************************************************************************************/ -+ -+int dslhal_support_writeHostMailbox(tidsl_t *ptidsl, int cmd, int tag, int p1, int p2) -+{ -+ int rc; -+ int index; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_mailboxControl_t mailboxControl; -+ DEV_HOST_dspHostMsg_t hostMailboxMsg[DEV_HOST_HOSTQUEUE_LENGTH]; -+ unsigned char hostInInx; -+ -+ dprintf(6,"dslhal_support_writeHostMailbox:cmd: 0x%x, tag=%d\n", cmd, tag); -+ -+ dprintf(6,"cmd=%d, tag=%d\n", cmd, tag); -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ /* Read in the command/response buffer */ -+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, -+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ /* Change the endianness of the Mailbox Control Pointer */ -+ mailboxControl.hostMsgBuf_p = (DEV_HOST_dspHostMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.hostMsgBuf_p); -+ rc = dslhal_support_blockRead((PVOID)mailboxControl.hostMsgBuf_p, -+ &hostMailboxMsg, (sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH)); -+ -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ /* Extract the command/response message index */ -+ mailboxControl.hostInInx &= 7; -+ mailboxControl.hostOutInx &= 7; -+ mailboxControl.dspOutInx &= 7; -+ mailboxControl.dspInInx &= 7; -+ -+ /* make sure there's room in the mailbox */ -+ -+ index = mailboxControl.hostInInx; -+ mailboxControl.hostInInx++; -+ mailboxControl.hostInInx &= 7; -+ hostInInx = mailboxControl.hostInInx; -+ if (mailboxControl.hostInInx == mailboxControl.hostOutInx) -+ { -+ /* mailbox is full */ -+ return DSLHAL_ERROR_MAILBOX_OVERFLOW; -+ } -+ -+ /* use bOCMDInInx as index to OCMDMsgBuf */ -+ hostMailboxMsg[index].cmd = (BYTE) cmd; -+ hostMailboxMsg[index].tag = (BYTE) tag; -+ hostMailboxMsg[index].param1 = (BYTE) p1; -+ hostMailboxMsg[index].param2 = (BYTE) p2; -+ rc = dslhal_support_blockWrite(&hostMailboxMsg, -+ (PVOID)mailboxControl.hostMsgBuf_p, -+ sizeof(DEV_HOST_dspHostMsg_t)*DEV_HOST_HOSTQUEUE_LENGTH); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockWrite failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ rc = dslhal_support_blockWrite(&mailboxControl, -+ &dspOamSharedInterface.dspHostMailboxControl_p, -+ sizeof(DEV_HOST_mailboxControl_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ /* update the index */ -+ mailboxControl.hostInInx = hostInInx; -+ rc = dslhal_support_blockWrite(&mailboxControl.hostInInx, -+ &dspOamSharedInterface.dspHostMailboxControl_p->hostInInx, -+ sizeof(BYTE)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ -+ dprintf(6,"dslhal_support_writeHostMailbox done\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} -+/* end of dslhal_support_writeHostMailbox() */ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readTextMailbox -+* -+********************************************************************************************* -+* DESCRIPTION: Reads a message from the mailbox -+* -+* ARGUMENTS: int *pcmd Pointer to command read -+* -+* RETURNS: 0 if successful -+* 1 if no mail -+* NZ otherwise -+* -+*****************************************************************************************/ -+ -+int dslhal_support_readTextMailbox(tidsl_t *ptidsl, int *pmsg1, int *pmsg2) -+{ -+ int rc; -+ unsigned int msg1; -+ unsigned int msg2; -+ unsigned char textOutInx; -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_mailboxControl_t mailboxControl; -+ DEV_HOST_textMsg_t textMailboxMsg[DEV_HOST_TEXTQUEUE_LENGTH]; -+ -+ dprintf(6,"dslhal_support_readTextMailbox\n"); -+ -+ /* get the DSP main pointer */ -+ -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterfacePtr_t) ptidsl->pmainAddr; -+ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* Read in the command/response buffer */ -+ dspOamSharedInterface.dspHostMailboxControl_p = (DEV_HOST_mailboxControl_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspHostMailboxControl_p); -+ -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspHostMailboxControl_p, -+ &mailboxControl, sizeof(DEV_HOST_mailboxControl_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* Change the endianness of the Mailbox Pointer */ -+ mailboxControl.textMsgBuf_p = (DEV_HOST_textMsg_t *) dslhal_support_byteSwap32((unsigned int)mailboxControl.textMsgBuf_p); -+ -+ rc = dslhal_support_blockRead((PVOID)mailboxControl.textMsgBuf_p, -+ &textMailboxMsg, (sizeof(DEV_HOST_textMsg_t)*DEV_HOST_DSPQUEUE_LENGTH)); -+ -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ /* Extract the command/response message index */ -+ -+ mailboxControl.textInInx &= 7; -+ mailboxControl.textOutInx &= 7; -+ -+ /* check for messages in the mailbox */ -+ -+ if (mailboxControl.textOutInx == mailboxControl.textInInx) -+ { -+ return DSLHAL_ERROR_MAILBOX_NOMAIL; -+ /* no messages to read */ -+ } -+ -+ /* use bDRESPOutInx as index to DRESPMsgBuf */ -+ -+ msg1 = textMailboxMsg[mailboxControl.textOutInx].msgPart1; -+ msg2 = textMailboxMsg[mailboxControl.textOutInx].msgPart2; -+ msg1 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg1); -+ msg2 = (unsigned int) dslhal_support_byteSwap32((unsigned int)msg2); -+ -+ mailboxControl.textOutInx++; /* increment count */ -+ mailboxControl.textOutInx &= 7; /* only two bits */ -+ -+ textOutInx = mailboxControl.textOutInx; -+ -+ /* Read in the command response buffer again to take care of changes */ -+ -+ mailboxControl.textOutInx = textOutInx; -+ -+ rc = dslhal_support_blockWrite(&mailboxControl.textOutInx, -+ &dspOamSharedInterface.dspHostMailboxControl_p->textOutInx, sizeof(BYTE)); -+ -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ -+ /* Is the input parameter address non-zero*/ -+ -+ if (pmsg1) -+ { -+ *pmsg1 = msg1; -+ } -+ if (pmsg2) -+ { -+ *pmsg2 = msg2; -+ } -+ -+ dprintf(6,"dslhal_support_readTextMailbox done\n"); -+ dprintf(6,"msgPart1=%d, msgPart2=%d\n", msg1, msg2); -+ dprintf(6,"dslhal_support_readTextMailbox:Message Part1: 0x%x, tag=0x%x\n", msg1, msg2); -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} /* end of dslhal_support_readTextMailbox() */ -+ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_hostDspCodeDownload() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_hostDspCodeDownload(tidsl_t * ptidsl) -+{ -+ -+ unsigned int index; -+ int rc = 0, i; -+ unsigned char *iptr; /* image pointer */ -+ unsigned int numbytes,olayXfer,olayStore; -+ /* unsigned int holdSecPhyAddr=0,holdSecVirtAddr; */ -+ unsigned int *olayStart; -+ size_t len; /* size of the file */ -+ size_t expoffset; /* expected offset for next section header */ -+ unsigned short checksum; -+ unsigned int crc32; -+ unsigned char * image; -+ char *tmp = (char *)DEV_HOST_DSP_OAM_POINTER_LOCATION; -+ DEV_HOST_dspVersionDef_t dspVersion; -+#if SWTC -+ DEV_HOST_tcHostCommDef_t TCHostCommDef; -+#endif -+ DEV_HOST_oamWrNegoParaDef_t OamWrNegoParaDef; -+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface, *pdspOamSharedInterface; -+ DEV_HOST_olayDpDef_t olayDpParms; -+ DEV_HOST_profileBase_t profileList; -+#ifndef NO_ACT -+ DEV_HOST_consBufDef_t constDisp; -+#endif -+#if CO_PROFILES -+ DEV_HOST_coData_t coData; -+#endif -+ DEV_HOST_olayDpPageDef_t olayDpPageDef[NUM_PAGES]; -+ union -+ { -+ char byte[4]; -+ unsigned short hword[2]; -+ unsigned int aword; -+ } data; -+ -+ struct _header -+ { -+ char signature[6]; -+ unsigned short sectcount; -+ unsigned int length; -+ } header; -+ -+ struct _section -+ { -+ unsigned int addr; -+ unsigned int length; -+ unsigned int offset; -+ unsigned int page; -+ };/* section[MAXSECTIONS]; */ -+ -+ struct _section *sptr; -+ unsigned int secAddr, secLength, secOffset, secPage; -+ -+ -+ dprintf(5,"dslhal_support_hostDspCodeDownload\n"); -+ image = ptidsl->fwimage; -+ -+ if (!image) -+ { -+ dprintf(1,"no image file\n"); -+ return DSLHAL_ERROR_NO_FIRMWARE_IMAGE; -+ } -+ -+ iptr=image; -+ -+ numbytes = sizeof(header); -+ -+ shim_osMoveMemory((char *) &header, (char *)iptr, numbytes); -+ header.length = dslhal_support_byteSwap32(header.length); -+ header.sectcount = dslhal_support_byteSwap16(header.sectcount); -+#if 0 -+ crc32 = dslhal_support_computeCrc32((unsigned char*)&crcTest[0],20); -+ dprintf(6,"CRC-32 for the crcTest: 0x%x",crc32); -+ dprintf(4,"header.length=%d, header.sectcount=0x%X\n", header.length, header.sectcount); -+#endif -+ /* point to the checksum */ -+ /* compute the checksum on CRC32 here */ -+ iptr = image + header.length-4; -+ numbytes = sizeof(data.aword); -+ -+ dprintf(5,"tiload: check checksum\n"); -+ shim_osMoveMemory((char *)&(data.byte), (char *)iptr, numbytes); -+ -+ crc32 = dslhal_support_computeCrc32(image,ptidsl->imagesize); -+ dprintf(5,"CRC-32 for the Binary: 0x%x",crc32); -+ /* CRC currently not added to the DSP binary, so this code is commented out */ -+ /* -+ data.aword = dslhal_support_byteSwap32(data.aword); -+ if (data.aword != crc32) -+ { -+ dprintf(1,"Checksum error\n"); -+ } -+ */ -+ /* Verify signature - Changed from "320C6x" to "TIDSL" for load 80 */ -+ -+ header.signature[5]='\0'; -+ dprintf(5, "signature=%s\n", header.signature); -+ -+ if (shim_osStringCmp(header.signature, "TIDSL")) -+ { -+ dprintf(1,"Signature not match\n"); -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ -+ dprintf(5,"tiload: check sect count\n"); -+ /* check section count */ -+ -+ if (header.sectcount > MAXSECTIONS) -+ { -+ dprintf(1,"Section # %d exceeds max %d\n", header.sectcount, MAXSECTIONS); -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ else -+ { -+ dprintf(5,"found %d sections\n", header.sectcount); -+ } -+ -+ /* Validation of Section offsets */ -+ -+ /* point to the first section */ -+ len = header.length; /* file size in bytes */ -+ expoffset = sizeof(struct _header) + header.sectcount * sizeof(struct _section); -+ -+ dprintf(5,"tiload: check offset\n"); -+ for (index=0; index<header.sectcount; index++) /* parse the sections one by one */ -+ { -+ numbytes = sizeof(struct _header) + index * sizeof(struct _section); /* Compute Section Offset */ -+ sptr = (struct _section *)(image + numbytes); /* Section Pointer to beginning of the section */ -+ -+ secAddr = dslhal_support_byteSwap32(sptr->addr); -+ secOffset = dslhal_support_byteSwap32(sptr->offset); -+ secLength = dslhal_support_byteSwap32(sptr->length); -+ secPage = dslhal_support_byteSwap32(sptr->page); -+ -+ /* validate offset */ -+ if ( secOffset== 0xffffffff) -+ { -+ /* special case: zero fill */ -+ /* offset is valid, don't change expoffset */ -+ } -+ else -+ { -+ if (secOffset > len-4) -+ { -+ dprintf(5,"Offset error\n"); -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ -+ /* determine expected offset of NEXT section */ -+ expoffset = secLength + secOffset; -+ -+ /* all addresses must be on word boundaries */ -+ if (secAddr & 3) -+ { -+ -+ } -+ } -+ } -+ -+ /* check final offset - should just be a checksum left */ -+/* IMPORTANT 11/24/02 --> Got this error... but bypassed for Pf of Concept*/ -+ /* -+ if (expoffset != len-4) -+ { -+ dprintf(5,"Final offset error\n"); -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ */ -+ -+ /* Actual Code loading to DSP Memory */ -+ -+ /* Initialize DSP Data Memory before code load*/ -+ dprintf(5,"Zero Prefill DSP DMEM\n"); -+ DSLHAL_REG32(ADSLSSADR)=0x80000000; -+ shim_osZeroMemory((char *)0xa1000000, 0x10000); -+ /* Load sections from the image */ -+ for (index=0; index<header.sectcount; index++) /* Parse each section */ -+ { -+ numbytes = sizeof(header) + index * sizeof(struct _section); /* Compute offset to next section */ -+ sptr = (struct _section *)(image + numbytes); /* Point to next section */ -+ -+ secAddr = dslhal_support_byteSwap32(sptr->addr); -+ secOffset = dslhal_support_byteSwap32(sptr->offset); -+ secLength = dslhal_support_byteSwap32(sptr->length); -+ secPage = dslhal_support_byteSwap32(sptr->page); -+ -+ data.aword = secAddr; -+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3]; -+ -+ data.aword = secLength; -+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3]; -+ -+ data.aword = secOffset; -+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3]; -+ -+ data.aword = secPage; -+ checksum += data.byte[0] + data.byte[1] + data.byte[2] + data.byte[3]; -+ -+ -+ /* validate offset */ -+ if (secOffset == 0xffffffff) -+ { -+ /* special case: zero fill */ -+ /* offset is valid, don't change expoffset */ -+ } -+ else -+ { -+ /* real offset */ -+ if(secOffset > len-4) -+ { -+ dprintf(5,"section[%u] offset too big (%X/%X)\n", index, -+ secOffset, len-4); -+ -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ -+ /* determine expected offset of NEXT section */ -+ expoffset = secLength + secOffset; -+ -+ } -+ -+ } -+ -+ /* check final offset - should just be a checksum left */ -+ /* -+ if(expoffset != len-4) -+ { -+ dprintf(1,"sections don't span full file (%X/%X)\n",expoffset,len-2); -+ return DSLHAL_ERROR_FIRMWARE_OFFSET; -+ } -+ */ -+ dprintf(5,"tiload: load binary\n"); -+ -+ for (index=0; index<header.sectcount; index++) -+ { -+ numbytes = sizeof(header) + index * sizeof(struct _section); -+ sptr = (struct _section *)(image + numbytes); -+ -+ secAddr = dslhal_support_byteSwap32(sptr->addr); -+ secOffset = dslhal_support_byteSwap32(sptr->offset); -+ secLength = dslhal_support_byteSwap32(sptr->length); -+ secPage = dslhal_support_byteSwap32(sptr->page); -+ dprintf(5,"loading section %u\n", index); -+ dprintf(5,"section %u: addr: %X\n", index, secAddr); -+ dprintf(5,"section %u: length: %X\n", index, secLength); -+ dprintf(5,"section %u: offset: %X\n", index, secOffset); -+ dprintf(5,"section %u: page: %X\n", index, secPage); -+ -+ /* point to the section's data */ -+ if(secOffset != 0xffffffff) -+ { -+ /* Load this section of data */ -+ iptr = image + secOffset; -+ dprintf(6, "iptr %8x\n", (unsigned int)iptr); -+ } -+ -+ if(secPage) -+ { -+ dprintf(6,"OVERLAY PAGE #%d\n",secPage); -+ /* overlay page, don't write to dsp yet, save into host memory*/ -+ -+ dprintf(6,"Section Length: %d \n",secLength); -+ ptidsl->olayDpPage[secPage].PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength); -+ if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL) -+ { -+ dprintf(1, "overlay page allocate error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+#ifdef PRE_SILICON -+ ptidsl->olayDpPage[secPage].overlayHostAddr = ((((ptidsl->olayDpPage[secPage].PmemStartWtAddr)-0x84000000)-0x10000000)+0x030b0000); -+#else -+ /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */ -+ ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr); -+#endif -+ dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr); -+ -+ ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr); -+ ptidsl->olayDpPage[secPage].OverlayXferCount = secLength; -+ ptidsl->olayDpPage[secPage].BinAddr = secAddr; -+ ptidsl->olayDpPage[secPage].SecOffset = secOffset; -+ shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength); -+ /* RamP Image ByteSwap test */ -+ olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr; -+ -+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++) -+ { -+ olayStore = *(unsigned int *)olayStart; -+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore); -+ *(unsigned int*)olayStart = olayStore; -+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore); -+ olayStart++; -+ olayStore=0; -+ } -+ /* RamP Image ByteSwap test */ -+ /* compute the CRC of each overlay page and Store the Checksum in a local global variable */ -+ /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */ -+ ptidsl->olayDpPage[secPage].olayPageCrc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount); -+ -+ shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength); -+ } -+ else -+ { -+ rc = secAddr&0xff000000; -+ if(rc && rc!=0x80000000) -+ { -+ dprintf(4,"Not DSP PMEM/DMEM\n"); -+ /* don't write to dsp, save into host memory*/ -+ dprintf(4,"Section Addr: %x Section Length: %d \n",secAddr,secLength); -+ ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength); -+ if(ptidsl->coProfiles.PmemStartWtAddr == NULL) -+ { -+ dprintf(1, "memory allocate error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ ptidsl->coProfiles.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr); -+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr); -+ ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr); -+ ptidsl->coProfiles.OverlayXferCount = secLength; -+ ptidsl->coProfiles.BinAddr = secAddr; -+ ptidsl->coProfiles.SecOffset = secOffset; -+ -+ shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength); -+ /* RamP Image ByteSwap test */ -+ olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr; -+ -+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++) -+ { -+ olayStore = *(unsigned int *)olayStart; -+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore); -+ *(unsigned int*)olayStart = olayStore; -+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore); -+ olayStart++; -+ olayStore=0; -+ } -+ shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength); -+ } -+ else -+ { -+ /* IMPORTANT: write image to DSP memory */ -+ rc=dslhal_support_blockWrite((void *)iptr, (void *)secAddr, secLength); -+ if(rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ shim_osClockWait(0x50000); -+ /* -+ rc=dslhal_support_blockRead((void*)secAddr, (void*)tmpBuffer, secLength); -+ if(rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ for(i=0;i<secLength;i++) -+ { -+ if(*iptr -+ }*/ -+ } -+ } -+ } /* end of write dsp image */ -+ -+ /*********************************************************************************** -+ * Start to fillup various values to our hardware structure for late use -+ ************************************************************************************/ -+ -+ /* get main pointer for data */ -+ -+ rc = dslhal_support_blockRead(tmp, &pdspOamSharedInterface, sizeof(unsigned int)); -+ dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface); -+ pdspOamSharedInterface= (DEV_HOST_dspOamSharedInterface_t *)dslhal_support_byteSwap32((unsigned int)pdspOamSharedInterface); -+ dprintf(5, "tmp=0x%X, addr=0x%X\n", (unsigned int)tmp, (unsigned int)pdspOamSharedInterface); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ if(!pdspOamSharedInterface) -+ { -+ dprintf(1,"Couldn't read main pointer\n"); -+ return DSLHAL_ERROR_INVALID_PARAM; -+ } -+ -+ ptidsl->pmainAddr=pdspOamSharedInterface; -+ -+ /* read the OamSharedInterfaceStructure */ -+ -+ dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr); -+ -+ /* get the pointer to DSP-OAM Shared Interface */ -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */ -+ -+ /* Change the Endianness of the profileList pointer */ -+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p); -+ /* Access the profileList Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ dprintf(2,"Old Addr:%x New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); -+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr; -+ rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ -+ /* Communicate the Allocated Memory Address to DSP to do overlays */ -+ -+ /* Change the Endianness of the olayDpDef pointer */ -+ dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p); -+ /* Access the olayDpDef Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ -+ for(i=1;i<NUM_PAGES;i++) -+ { -+ /* Change the endianness of the olayDpPageDef Pointer */ -+ olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]); -+ /* Access the olayDpPageDef Structure */ -+ rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr; -+ rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ } -+ -+ /* Change the endianness of the Datapump Version Pointer */ -+ dspOamSharedInterface.datapumpVersion_p = (DEV_HOST_dspVersionDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.datapumpVersion_p); -+ -+ /* get DSPVersion itself */ -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.datapumpVersion_p,&dspVersion, sizeof(DEV_HOST_dspVersionDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* table_dsp info */ -+#if SWTC -+ dspOamSharedInterface.tcHostComm_p = (DEV_HOST_tcHostCommDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); -+ rc = dslhal_support_blockRead(&pdspOamSharedInterface->tcHostComm_p, -+ &pTCHostCommDef, 4); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ pTCHostCommDef=(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)pTCHostCommDef); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, -+ &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+#endif -+ /* Select the Multimode Training */ -+ dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, &OamWrNegoParaDef, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+switch(dspVersion.netService) -+ { -+ case 1: OamWrNegoParaDef.stdMode = MULTI_MODE; -+ dprintf(5,"POTS Service \n"); -+ ptidsl->netService = 1; -+ break; -+ case 2: OamWrNegoParaDef.stdMode = GDMT_MODE; -+ dprintf(5,"ISDN Service \n"); -+ ptidsl->netService = 2; -+ break; -+ default: OamWrNegoParaDef.stdMode = T1413_MODE; -+ dprintf(5,"Default Service \n"); -+ break; -+ } -+ -+ ptidsl->AppData.StdMode = (unsigned int)OamWrNegoParaDef.stdMode; -+ -+ OamWrNegoParaDef.oamFeature = dslhal_support_byteSwap32((OAMFEATURE_TC_SYNC_DETECT_MASK)); -+ /* Set the flag to start retraining if the margin of the modem drops below -+ default margin during showtime */ -+ -+ OamWrNegoParaDef.marginMonitorShwtme = FALSE; -+ /* Set the flag to start retraining if the margin of the modem drops below default margin during training */ -+ -+ OamWrNegoParaDef.marginMonitorTrning = FALSE; -+ OamWrNegoParaDef.dsToneTurnoff_f = 0; -+ dslhal_support_blockWrite(&OamWrNegoParaDef, -+ (PVOID)dspOamSharedInterface.oamWriteNegoParams_p, sizeof(DEV_HOST_oamWrNegoParaDef_t)); -+ rc=dslhal_support_setInterruptMask(ptidsl,0); -+ if(rc!=DSLHAL_ERROR_NO_ERRORS) -+ return rc; -+ /* Co Profile Test */ -+#if CO_PROFILES -+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p); -+ /* Access the profileList Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)dslhal_support_byteSwap32((unsigned int)profileList.hostProfileBase_p); -+ rc = dslhal_support_blockRead((PVOID)profileList.hostProfileBase_p,&coData, sizeof(DEV_HOST_coData_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ dprintf(2,"Current Profile Vendor Id: %x \n",coData.phyAgcPgaTarget); -+ coData.phyAgcPgaTarget = 0xcaba; -+ rc = dslhal_support_blockWrite(&coData,(PVOID)profileList.hostProfileBase_p,sizeof(DEV_HOST_coData_t)); -+ if(rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+#endif -+ /* End of CO Profile Test */ -+ -+#ifndef NO_ACT -+ /* Constellation Display Buffer Allocate */ -+ ptidsl->constDisplay.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(DSP_CONSTELLATION_BUFFER_SIZE); -+ if(ptidsl->constDisplay.PmemStartWtAddr == NULL) -+ { -+ dprintf(1, "memory allocate error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ shim_osZeroMemory((void*)ptidsl->constDisplay.PmemStartWtAddr,DSP_CONSTELLATION_BUFFER_SIZE); -+ ptidsl->constDisplay.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->constDisplay.PmemStartWtAddr); -+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->constDisplay.PmemStartWtAddr, ptidsl->constDisplay.overlayHostAddr); -+ ptidsl->constDisplay.OverlayXferCount = DSP_CONSTELLATION_BUFFER_SIZE; -+ -+ /* Communicate the Allocated Buffer for DSP load Constellation Data */ -+ -+ /* Change the Endianness of the profileList pointer */ -+ dspOamSharedInterface.consDispVar_p = (DEV_HOST_consBufDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.consDispVar_p); -+ /* Access the profileList Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.consDispVar_p,&constDisp, sizeof(DEV_HOST_consBufDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ dprintf(2,"Constellation Old Addr:%x New: %x \n",constDisp.consDispStartAddr,ptidsl->constDisplay.overlayHostAddr); -+ constDisp.consDispStartAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->constDisplay.overlayHostAddr); -+ constDisp.consDispCurrentAddr = constDisp.consDispStartAddr; -+ constDisp.consDispBufLen = (unsigned int)dslhal_support_byteSwap32(DSP_CONSTELLATION_BUFFER_SIZE); -+ rc = dslhal_support_blockWrite(&constDisp,(PVOID)dspOamSharedInterface.consDispVar_p,sizeof(DEV_HOST_consBufDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+#endif -+ dprintf(5,"dslhal_support_hostDspCodeDownload() completed.\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+ -+} /* end of dslhal_support_hostDspCodeDownload() */ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readDelineationState() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_readDelineationState(tidsl_t * ptidsl) -+{ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_atmStats_t atmStats; -+ DEV_HOST_dsAtmStats_t dsAtmStats0; -+ unsigned int rc=0, delinState=0; -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ dspOamSharedInterface.atmStats_p = (DEV_HOST_atmStats_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.atmStats_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.atmStats_p,&atmStats, sizeof(DEV_HOST_atmStats_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ atmStats.ds0_p = (DEV_HOST_dsAtmStats_t *) dslhal_support_byteSwap32((unsigned int)atmStats.ds0_p); -+ -+ rc = dslhal_support_blockRead((PVOID)atmStats.ds0_p,&dsAtmStats0, (sizeof(DEV_HOST_dsAtmStats_t))); -+ -+ if (rc) -+ return rc; -+ delinState = dslhal_support_byteSwap32(dsAtmStats0.delineationState); -+ if(delinState == TC_SYNC) -+ ptidsl->lConnected = 1; -+ else -+ ptidsl->lConnected = 0; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_processModemStateBitField() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_processModemStateBitField(tidsl_t * ptidsl) -+{ -+ int rc, offset[2]={2,0}; -+ int modemStateBitFields[NUMBER_OF_BITFIELDS],changedField=0; -+ rc = dslhal_api_dspInterfaceRead(ptidsl,(unsigned int)ptidsl->pmainAddr,2,(unsigned int *)&offset, -+ (unsigned char *)&modemStateBitFields,NUMBER_OF_BITFIELDS*sizeof(int)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ for(rc=0;rc<NUMBER_OF_BITFIELDS;rc++) -+ dprintf(4,"Bit Field %d: 0x%x \n",rc+1,dslhal_support_byteSwap32((unsigned int)modemStateBitFields[rc])); -+ -+ for(rc=NUMBER_OF_BITFIELDS;rc>0;rc--) -+ { -+ if(ptidsl->modemStateBitField[rc-1]!=modemStateBitFields[rc-1]) -+ { -+ changedField = rc; -+ break; -+ } -+ } -+ if(changedField) -+ { -+ for(rc=0;rc<32;rc++) -+ { -+ if(modemStateBitFields[changedField-1] & dslhal_support_byteSwap32((BITFIELD_SCAN >> rc))) -+ break; -+ } -+ dprintf(5,"Changed Field : %d Changed Bit : %d \n",changedField,(31-rc)); -+ ptidsl->rState = ((changedField*100) + (31-rc)); -+ dprintf(5,"Modem State : %d \n",ptidsl->rState); -+ shim_osMoveMemory((void *)ptidsl->modemStateBitField,(void *)modemStateBitFields, 4*NUMBER_OF_BITFIELDS); -+ } -+ -+ switch(changedField) -+ { -+ case 1: if((ptidsl->rState >= ATU_RIDLE) && (ptidsl->AppData.bState < RSTATE_IDLE)) -+ ptidsl->AppData.bState = RSTATE_IDLE; -+ if((ptidsl->rState >= GDMT_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT)) -+ ptidsl->AppData.bState = RSTATE_INIT; -+ if((ptidsl->rState >= GDMT_ACKX) && (ptidsl->AppData.bState < RSTATE_HS)) -+ ptidsl->AppData.bState = RSTATE_HS; -+ break; -+ -+ case 2: if((ptidsl->rState >= T1413_NSFLR) && (ptidsl->AppData.bState < RSTATE_INIT)) -+ ptidsl->AppData.bState = RSTATE_INIT; -+ if((ptidsl->rState >= T1413_ACKX) && (ptidsl->AppData.bState < RSTATE_HS)) -+ ptidsl->AppData.bState = RSTATE_HS; -+ if((ptidsl->rState == ATU_RSHOWTIME) && (ptidsl->AppData.bState < RSTATE_SHOWTIME)) -+ ptidsl->AppData.bState = RSTATE_SHOWTIME; -+ break; -+ -+ case 3: if((ptidsl->rState >= ADSL2_COMB3) && (ptidsl->AppData.bState < RSTATE_INIT)) -+ ptidsl->AppData.bState = RSTATE_INIT; -+ if((ptidsl->rState >= ADSL2_RPARAMS) && (ptidsl->AppData.bState < RSTATE_HS)) -+ ptidsl->AppData.bState = RSTATE_HS; -+ break; -+ -+ case 4: break; -+ default: break; -+ } -+ -+ ptidsl->stateTransition = modemStateBitFields[1]; -+ switch(ptidsl->AppData.bState) -+ { -+ case RSTATE_IDLE: ptidsl->AppData.idleTick=shim_osClockTick(); -+ ptidsl->AppData.initTick=0; -+ ptidsl->AppData.showtimeTick=0; -+ break; -+ case RSTATE_HS: if(!ptidsl->AppData.initTick) -+ { -+ ptidsl->AppData.initTick=shim_osClockTick(); -+ } -+ ptidsl->AppData.showtimeTick=0; -+ break; -+ case RSTATE_SHOWTIME: if(!ptidsl->AppData.showtimeTick) -+ ptidsl->AppData.showtimeTick=shim_osClockTick(); -+ break; -+ default: break; -+ } -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_setInterruptMask() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_setInterruptMask(tidsl_t * ptidsl,unsigned int inputMask) -+{ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_hostInterruptMask_t interruptMask; -+ unsigned int rc=0; -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ dspOamSharedInterface.hostInterruptMask_p =(DEV_HOST_hostInterruptMask_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptMask_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptMask_p, -+ &interruptMask, sizeof(DEV_HOST_hostInterruptMask_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ if(inputMask & MASK_MAILBOX_INTERRUPTS) -+ { -+ dprintf(7,"Mailbox Interrupts Masked \n"); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ } -+ if(inputMask & MASK_BITFIELD_INTERRUPTS) -+ { -+ dprintf(7,"Bit field Interrupts Masked \n"); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ } -+ if(inputMask & MASK_HEARTBEAT_INTERRUPTS) -+ { -+ dprintf(7,"Bit field Interrupts Masked \n"); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ interruptMask.maskBitField1 |= dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS); -+ dprintf(7,"interruptMask.maskBitField1 = %d \n",dslhal_support_byteSwap32(interruptMask.maskBitField1)); -+ } -+ dslhal_support_blockWrite(&interruptMask, -+ dspOamSharedInterface.hostInterruptMask_p, sizeof(DEV_HOST_hostInterruptMask_t)); -+ dprintf(5,"dslhal_support_setInterruptMask() completed.\n"); -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_parseInterruptSource() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Parses the Interrupt Source Bit Field -+* -+* Return: interrupt Code if successful -+* negative error code if failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl) -+{ -+ DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; -+ DEV_HOST_hostInterruptSource_t interruptSource; -+ unsigned int rc=0,intrCode=0; -+ pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return (0-DSLHAL_ERROR_BLOCK_READ); -+ } -+ dspOamSharedInterface.hostInterruptSource_p =(DEV_HOST_hostInterruptSource_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.hostInterruptSource_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.hostInterruptSource_p, -+ &interruptSource, sizeof(DEV_HOST_hostInterruptSource_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return (0-DSLHAL_ERROR_BLOCK_READ); -+ } -+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_MAILBOX_INTERRUPTS)) -+ { -+ dprintf(7,"Mailbox Interrupts Acknowledge \n"); -+ intrCode |= 0x00000011; -+ } -+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_BITFIELD_INTERRUPTS)) -+ { -+ dprintf(7,"Bit field Interrupt Acknowledge \n"); -+ intrCode |= 0x00001002; -+ } -+ if(interruptSource.sourceBitField1 & dslhal_support_byteSwap32(MASK_HEARTBEAT_INTERRUPTS)) -+ { -+ dprintf(7,"HeartBeat Interrupt Acknowledge \n"); -+ intrCode |= 0x00100004; -+ } -+ -+ interruptSource.sourceBitField1 &=0x0; -+ rc=dslhal_support_blockWrite(&interruptSource, -+ dspOamSharedInterface.hostInterruptSource_p, sizeof(DEV_HOST_hostInterruptSource_t)); -+ if(rc) -+ return (0-DSLHAL_ERROR_BLOCK_WRITE); -+ dprintf(5,"dslhal_support_parseInterruptSource() completed.\n"); -+ return intrCode; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_byteSwap16() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* input 16 bit short, byte swap from little endian to big endian or vise versa -+* -+********************************************************************************************/ -+ -+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits) -+{ -+ unsigned short out16Bits; -+ -+#ifdef EB -+ unsigned char *pchar; -+ unsigned char tmp; -+#endif -+ -+ out16Bits = in16Bits; -+ -+#ifdef EB -+ pchar = (unsigned char *)(&out16Bits); -+ -+ tmp = *pchar; -+ *pchar = *(pchar + 1); -+ *(pchar + 1) = tmp; -+#endif -+ -+ return out16Bits; -+ -+} /* end of dslhal_support_byteSwap16() */ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_byteSwap32() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* input 32 bit int, byte swap from little endian to big endian or vise versa -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits) -+{ -+ int out32Bits; -+ -+#ifdef EB -+ unsigned char tmp; -+ unsigned char *pchar; -+#endif -+ -+ out32Bits = in32Bits; -+ -+#ifdef EB -+ pchar = (unsigned char *)(&out32Bits); -+ -+ tmp = *pchar; -+ *pchar = *(pchar + 3); -+ *(pchar + 3) = tmp; -+ -+ tmp = *(pchar + 1); -+ *(pchar + 1) = *(pchar + 2); -+ *(pchar + 2) = tmp; -+#endif -+ -+ return out32Bits; -+ -+} /* end of dslhal_support_byteSwap32() */ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_computeCrc32() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data -+* -+* Return: 32 bit CRC of the input data -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_computeCrc32(unsigned char *data, int len) -+{ -+ unsigned int result; -+ int i,j; -+ unsigned char octet; -+ -+ if ((len < 4) || (data==NULL)) -+ return(0xdeaddead); -+ result = *data++ << 24; -+ result |= *data++ << 16; -+ result |= *data++ << 8; -+ result |= *data++; -+ result = ~ result; -+ -+ len -=4; -+ -+ for (i=0; i<len; i++) -+ { -+ octet = *(data++); -+ for (j=0; j<8; j++) -+ { -+ if (result & 0x80000000) -+ { -+ result = (result << 1) ^ CRC32_QUOTIENT ^ (octet >> 7); -+ } -+ else -+ { -+ result = (result << 1) ^ (octet >> 7); -+ } -+ octet <<= 1; -+ } -+ } -+ return ~result; /* The complement of the remainder */ -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_checkOverlayPage() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_checkOverlayPage(tidsl_t *ptidsl, unsigned int tag) -+{ -+ unsigned int computedCrc; -+ if((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr == NULL) -+ { -+ dprintf(5,"Null Address for Page: %d\n",tag); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ computedCrc = dslhal_support_computeCrc32((unsigned char *)ptidsl->olayDpPage[tag].PmemStartWtAddr, ptidsl->olayDpPage[tag].OverlayXferCount); -+ dprintf(6,"\n Pre-Computed CRC32 = 0x%x \t Current CRC32 = 0x%x \n",ptidsl->olayDpPage[tag].olayPageCrc32,computedCrc); -+ if(computedCrc != ptidsl->olayDpPage[tag].olayPageCrc32) -+ return DSLHAL_ERROR_OVERLAY_CORRUPTED; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_clearTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_clearTrainingInfo(tidsl_t *ptidsl) -+{ -+ int i; -+ -+ for(i=0; i<NUM_PAGES; i++) -+ { -+ if(ptidsl->olayDpPage[i].PmemStartWtAddr !=NULL) -+ { -+ shim_osFreeDmaMemory((void *) ptidsl->olayDpPage[i].PmemStartWtAddr, -+ ptidsl->olayDpPage[i].OverlayXferCount); -+ ptidsl->olayDpPage[i].PmemStartWtAddr =NULL; -+ } -+ } -+ if(ptidsl->coProfiles.PmemStartWtAddr != NULL) -+ { -+ shim_osFreeDmaMemory((void *)ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.OverlayXferCount); -+ ptidsl->coProfiles.PmemStartWtAddr = NULL; -+ } -+ return 0; -+} -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_reloadTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Reload overlay pages from flash or memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl) -+{ -+ -+ int rc = 0, i; -+ unsigned int olayXfer,olayStore; -+ unsigned int *olayStart; -+ -+ unsigned int crc32; -+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface; -+ DEV_HOST_olayDpDef_t olayDpParms; -+ DEV_HOST_olayDpPageDef_t olayDpPageDef[NUM_PAGES]; -+ DEV_HOST_profileBase_t profileList; -+ -+ unsigned int secLength, secOffset, secPage; -+ -+ /* co profile */ -+ secLength = ptidsl->coProfiles.OverlayXferCount; -+ secOffset = ptidsl->coProfiles.SecOffset; -+ ptidsl->coProfiles.PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength); -+ if(ptidsl->coProfiles.PmemStartWtAddr == NULL) -+ { -+ dprintf(1, "memory allocate error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ /* holdSecPhyAddr = virtual2Physical((unsigned int)holdSecVirtAddr); */ -+ ptidsl->coProfiles.overlayHostAddr = virtual2Physical((unsigned int)ptidsl->coProfiles.PmemStartWtAddr); -+ dprintf(4,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->coProfiles.PmemStartWtAddr, ptidsl->coProfiles.overlayHostAddr); -+ ptidsl->coProfiles.overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->coProfiles.overlayHostAddr); -+ -+ rc = shim_read_overlay_page((void *)ptidsl->coProfiles.PmemStartWtAddr, secOffset, secLength); -+ if(rc != secLength) -+ { -+ dprintf(1, "shim_read_overlay_page failed\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ -+ /*shim_osMoveMemory((char *)ptidsl->coProfiles.PmemStartWtAddr, (char *)iptr, secLength);*/ -+ /* RamP Image ByteSwap test */ -+ olayStart = (unsigned int *)ptidsl->coProfiles.PmemStartWtAddr; -+ -+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++) -+ { -+ olayStore = *(unsigned int *)olayStart; -+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore); -+ *(unsigned int*)olayStart = olayStore; -+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore); -+ olayStart++; -+ olayStore=0; -+ } -+ shim_osWriteBackCache((void *)ptidsl->coProfiles.PmemStartWtAddr, secLength); -+ -+ -+ for (secPage=1;secPage<NUM_PAGES; secPage++) -+ { -+ -+ dprintf(6,"OVERLAY PAGE #%d\n",secPage); -+ -+ secLength = ptidsl->olayDpPage[secPage].OverlayXferCount; -+ -+ dprintf(4,"Section[%d] Length: %d \n",secPage, secLength); -+ -+ secOffset = ptidsl->olayDpPage[secPage].SecOffset; -+ ptidsl->olayDpPage[secPage].PmemStartWtAddr = (unsigned int) shim_osAllocateDmaMemory(secLength); -+ if(ptidsl->olayDpPage[secPage].PmemStartWtAddr == NULL) -+ { -+ dprintf(1, "overlay page allocate error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ -+ rc = shim_read_overlay_page((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr,secOffset, secLength); -+ if(rc != secLength) -+ { -+ dprintf(1, "overlay page read error\n"); -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ } -+ -+ /* ptidsl->olayDpPage[secPage].overlayHostAddr = ((unsigned int)(ptidsl->olayDpPage[secPage].PmemStartWtAddr)&~0xe0000000); */ -+ ptidsl->olayDpPage[secPage].overlayHostAddr = virtual2Physical((unsigned int)ptidsl->olayDpPage[secPage].PmemStartWtAddr); -+ dprintf(6,"Allocated Addr: 0x%x \t Xlated Addr: 0x%x \n",ptidsl->olayDpPage[secPage].PmemStartWtAddr,ptidsl->olayDpPage[secPage].overlayHostAddr); -+ -+ ptidsl->olayDpPage[secPage].overlayHostAddr = (unsigned int)dslhal_support_byteSwap32(ptidsl->olayDpPage[secPage].overlayHostAddr); -+ /*ptidsl->olayDpPage[secPage].OverlayXferCount = secLength; -+ ptidsl->olayDpPage[secPage].BinAddr = secAddr; -+ shim_osMoveMemory((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, (char *)iptr, secLength); -+ */ -+ olayStart = (unsigned int *)ptidsl->olayDpPage[secPage].PmemStartWtAddr; -+ -+ for(olayXfer=0;olayXfer< secLength/4;olayXfer++) -+ { -+ olayStore = *(unsigned int *)olayStart; -+ olayStore = (unsigned int)dslhal_support_byteSwap32(olayStore); -+ *(unsigned int*)olayStart = olayStore; -+ dprintf(5, "Addr:0x%x \t Content: 0x%x \n",olayStart,olayStore); -+ olayStart++; -+ olayStore=0; -+ } -+ /* RamP Image ByteSwap test */ -+ /* compute the CRC of each overlay page and Store the Checksum in a local global variable */ -+ /* This Value of CRC is to be compared with the header where all the CRC bytes are lumped together */ -+ crc32 = dslhal_support_computeCrc32((char *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, ptidsl->olayDpPage[secPage].OverlayXferCount); -+ if(crc32 != ptidsl->olayDpPage[secPage].olayPageCrc32) -+ return DSLHAL_ERROR_OVERLAY_MALLOC; -+ -+ shim_osWriteBackCache((void *)ptidsl->olayDpPage[secPage].PmemStartWtAddr, secLength); -+ } -+ -+ -+ dprintf(5,"ptidsl->hostIf.mainAddr=0x%X\n", (unsigned int)ptidsl->pmainAddr); -+ -+ /* get the pointer to DSP-OAM Shared Interface */ -+ rc = dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface, -+ sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ /* Communicate the Allocated Memory Address to DSP to choose CO Profiles */ -+ -+ /* Change the Endianness of the profileList pointer */ -+ dspOamSharedInterface.profileList_p = (DEV_HOST_profileBase_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.profileList_p); -+ /* Access the profileList Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.profileList_p,&profileList, sizeof(DEV_HOST_profileBase_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ dprintf(2,"Old Addr:%x New: %x \n",profileList.hostProfileBase_p,ptidsl->coProfiles.overlayHostAddr); -+ profileList.hostProfileBase_p = (DEV_HOST_coData_t *)ptidsl->coProfiles.overlayHostAddr; -+ rc = dslhal_support_blockWrite(&profileList,(PVOID)dspOamSharedInterface.profileList_p,sizeof(DEV_HOST_profileBase_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ -+ /* Communicate the Allocated Memory Address to DSP to do overlays */ -+ -+ /* Change the Endianness of the olayDpDef pointer */ -+ dspOamSharedInterface.olayDpParms_p = (DEV_HOST_olayDpDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.olayDpParms_p); -+ /* Access the olayDpDef Structure */ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.olayDpParms_p,&olayDpParms, sizeof(DEV_HOST_olayDpDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ -+ for(i=1;i<NUM_PAGES;i++) -+ { -+ /* Change the endianness of the olayDpPageDef Pointer */ -+ olayDpParms.olayDpPage_p[i] = (DEV_HOST_olayDpPageDef_t *) dslhal_support_byteSwap32((unsigned int)olayDpParms.olayDpPage_p[i]); -+ /* Access the olayDpPageDef Structure */ -+ rc = dslhal_support_blockRead((PVOID)olayDpParms.olayDpPage_p[i],&olayDpPageDef[i],sizeof(DEV_HOST_olayDpPageDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ olayDpPageDef[i].overlayHostAddr = ptidsl->olayDpPage[i].overlayHostAddr; -+ rc = dslhal_support_blockWrite(&olayDpPageDef[i],(PVOID)olayDpParms.olayDpPage_p[i],sizeof(DEV_HOST_olayDpPageDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_WRITE; -+ } -+ -+ ptidsl->bOverlayPageLoaded = 1; -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ /* end of dslhal_support_reloadTrainingInfo() */ -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_restoreTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+ -+int dslhal_support_restoreTrainingInfo(tidsl_t *ptidsl) -+{ -+ int rc; -+ -+ rc=1; -+ while(rc != 0) -+ { -+ dslhal_support_clearTrainingInfo(ptidsl); -+ //shim_osCriticalEnter(); -+ rc = dslhal_support_reloadTrainingInfo(ptidsl); -+ //shim_osCriticalExit(); -+ shim_osClockWait(6400); -+ } -+ return 0; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_advancedIdleProcessing() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Idle State Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl) -+{ -+ int rc=0; -+ ptidsl->AppData.bState = RSTATE_IDLE; -+#ifndef NO_ACT -+ rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,0); -+ rc += dslhal_advcfg_resetBitSwapMessageLog(ptidsl,1); -+ rc += dslhal_advcfg_resetTrainStateHistory(ptidsl); -+ rc += dslhal_advcfg_getReasonForDrop(ptidsl); -+#endif -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Idle State Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs) -+{ -+ int rc=0; -+#ifndef NO_ACT -+ int i; -+ int differentCmd_f; -+ unsigned int dsSwapInx; -+ -+ static UINT8 lastAturBitSwapCommands[6] = {0, 0, 0, 0, 0, 0}; -+ static UINT8 lastAturBitSwapBinNum[6] = {0, 0, 0, 0, 0, 0}; -+ -+ if (usDs == 0) -+ { -+ dprintf(4," DSP_XMITBITSWAP\n"); -+ rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,0); -+ ptidsl->usBitSwapInx++; -+ if (ptidsl->usBitSwapInx > 29) -+ ptidsl->usBitSwapInx=0; -+ } -+ -+ if (usDs == 1) -+ { -+ dprintf(4," DSP_RCVBITSWAP\n"); -+ rc += dslhal_advcfg_getAocBitswapBuffer(ptidsl,1); -+ differentCmd_f = FALSE; -+ dsSwapInx = ptidsl->dsBitSwapInx; -+ if (! rc) -+ { -+ for (i = 0; i < 6; i++) -+ { -+ if (lastAturBitSwapCommands[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand[i]) -+ { -+ differentCmd_f = TRUE; -+ break; -+ } -+ } -+ if (! differentCmd_f) -+ { -+ for (i = 0; i < 6; i++) -+ { -+ if (lastAturBitSwapBinNum[i] != ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum[i]) -+ { -+ differentCmd_f = TRUE; -+ break; -+ } -+ } -+ } -+ //CPE data pump seems to occasionally send us the same bit swap twice in a row with different sframe counter. -+ //Since these are never counted twice by the debug output of AC5, we should not count them twice either. -+ //So, we ignore the sframe_counter in determining whether the most recent bitswap is a duplicate. -+ if (differentCmd_f) -+ { -+ shim_osMoveMemory((void *)lastAturBitSwapCommands, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapCommand, 6); -+ shim_osMoveMemory((void *)lastAturBitSwapBinNum, (void *)ptidsl->dsBitSwap[dsSwapInx].bitSwapBinNum, 6); -+ ptidsl->dsBitSwapInx++; -+ if (ptidsl->dsBitSwapInx > 29) -+ ptidsl->dsBitSwapInx = 0; -+ } -+ } -+ } -+#endif -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherEocMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced EOC Buffering functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2) -+{ -+ int rc=0; -+#ifndef NO_ACT -+ rc = dslhal_advcfg_logEocMessages(ptidsl,usDs, msgPart1, msgPart2); -+#endif -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherSnrPerBin() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Snr per bin buffering Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParam) -+{ -+ int rc=0; -+#ifndef NO_ACT -+ rc = dslhal_advcfg_getSnrPerBin(ptidsl,snrParam); -+#endif -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_processTrainingState() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Training State Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl) -+{ -+ int rc=0; -+#ifndef NO_ACT -+ -+ if(ptidsl->trainStateInx<120) -+ { -+ rc = dslhal_advcfg_getTrainingState(ptidsl,(void *)&ptidsl->trainHistory[ptidsl->trainStateInx++]); -+ if(ptidsl->trainHistory[(ptidsl->trainStateInx-1)].subStateIndex == -+ ptidsl->trainHistory[(ptidsl->trainStateInx-2)].subStateIndex) -+ ptidsl->trainStateInx--; -+ } -+ else -+ ptidsl->trainStateInx = 0; -+#endif -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Gathers ADSL2 Training Messages -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int tag, int param1, int param2) -+{ -+ int rc=0; -+ unsigned int adsl2MsgLoc; -+ switch(tag) -+ { -+ case CMSGFMT_INDEX: -+ dprintf(5,"C-Msg-FMT rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSGFMT_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsgFmt,CMSGFMT_SIZE); -+ break; -+ case RMSGFMT_INDEX: -+ case RMSGFMT2_INDEX: -+ dprintf(5,"R-Msg-FMT rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSGFMT_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.rMsgFmt,RMSGFMT_SIZE); -+ break; -+ case CMSGPCB_INDEX: -+ dprintf(5,"C-Msg-PCB rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSGPCB_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB_SIZE); -+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB_SIZE; -+ break; -+ case CMSGPCB2_INDEX: -+ dprintf(5,"C-Msg-PCB2 rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSGPCB2_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2_SIZE); -+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2_SIZE; -+#ifndef NO_ACT -+ rc += dslhal_advcfg_setBlackOutBits(ptidsl); -+#endif -+ break; -+ case CMSGPCB2L_INDEX: -+ dprintf(5,"C-Msg-PCB2L rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSGPCB2L_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsgPcb,CMSGPCB2L_SIZE); -+ ptidsl->adsl2TrainingMessages.cMsgPcbLen = CMSGPCB2L_SIZE; -+ break; -+ case RMSGPCB_INDEX: -+ case RMSGPCB2L_INDEX: -+ dprintf(5,"R-Msg-PCB rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSGPCB_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.rMsgPcb,RMSGPCB_SIZE); -+ ptidsl->adsl2TrainingMessages.rMsgPcbLen = RMSGPCB_SIZE; -+ break; -+ -+ case CMSG1ADSL2_INDEX: -+ dprintf(5,"C-Msg1 rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG1ADSL2_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsg1,CMSG1ADSL2_SIZE); -+ ptidsl->adsl2TrainingMessages.cMsg1Len = CMSG1ADSL2_SIZE; -+ break; -+ case CMSG2ADSL2_INDEX: -+ dprintf(5,"C-Msg2 rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG2ADSL2_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cMsg2,CMSG2ADSL2_SIZE); -+ ptidsl->adsl2TrainingMessages.cMsg2Len = CMSG2ADSL2_SIZE; -+ break; -+ case RMSG1ADSL2_INDEX: -+ dprintf(5,"R-Msg1 rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG1ADSL2_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.rMsg1,RMSG1ADSL2_SIZE); -+ ptidsl->adsl2TrainingMessages.rMsg1Len = RMSG1ADSL2_SIZE; -+ break; -+ case RMSG2ADSL2_INDEX: -+ dprintf(5,"R-Msg2 rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG2ADSL2_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.rMsg2,RMSG2ADSL2_SIZE); -+ ptidsl->adsl2TrainingMessages.rMsg2Len = RMSG2ADSL2_SIZE; -+ break; -+ case CPARAMS_INDEX: -+ dprintf(5,"C-Params rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CPARAMS_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.cParams,CPARAMS_SIZE); -+ ptidsl->adsl2TrainingMessages.cParamsLen = CPARAMS_SIZE; -+ break; -+ case RPARAMS_INDEX: -+ dprintf(5,"R-Params rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RPARAMS_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2TrainingMessages.rParams,RPARAMS_SIZE); -+ ptidsl->adsl2TrainingMessages.rParamsLen = RPARAMS_SIZE; -+ break; -+ case RMSG1LD_INDEX: -+ dprintf(5,"R-Msg1 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG1LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg1Ld,RMSG1LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsg1LdLen = RMSG1LD_SIZE; -+ break; -+ case RMSG2LD_INDEX: -+ dprintf(5,"R-Msg2 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG2LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg2Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG3LD_INDEX: -+ dprintf(5,"R-Msg3 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG3LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg3Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG4LD_INDEX: -+ dprintf(5,"R-Msg4 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG4LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg4Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG5LD_INDEX: -+ dprintf(5,"R-Msg5 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG5LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg5Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG6LD_INDEX: -+ dprintf(5,"R-Msg6 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG6LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg6Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG7LD_INDEX: -+ dprintf(5,"R-Msg7 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG7LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg7Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG8LD_INDEX: -+ dprintf(5,"R-Msg8 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG8LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg8Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case RMSG9LD_INDEX: -+ dprintf(5,"R-Msg9 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, RMSG9LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.rMsg9Ld,RMSGxLD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.rMsgxLdLen = RMSGxLD_SIZE; -+ break; -+ case CMSG1LD_INDEX: -+ dprintf(5,"C-Msg1 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG1LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.cMsg1Ld,CMSG1LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.cMsg1LdLen = CMSG1LD_SIZE; -+ break; -+ case CMSG2LD_INDEX: -+ dprintf(5,"C-Msg2 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG2LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.cMsg2Ld,CMSG2LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.cMsg2LdLen = CMSG2LD_SIZE; -+ break; -+ case CMSG3LD_INDEX: -+ dprintf(5,"C-Msg3 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG3LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.cMsg3Ld,CMSG3LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.cMsg3LdLen = CMSG3LD_SIZE; -+ break; -+ case CMSG4LD_INDEX: -+ dprintf(5,"C-Msg4 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG4LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.cMsg4Ld,CMSG4LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.cMsg4LdLen = CMSG4LD_SIZE; -+ break; -+ case CMSG5LD_INDEX: -+ dprintf(5,"C-Msg5 LD rec'd\n"); -+ adsl2MsgLoc = dslhal_support_getAdsl2MessageLocation -+ (ptidsl, CMSG5LD_INDEX); -+ rc += dslhal_support_blockRead((PVOID)adsl2MsgLoc, -+ ptidsl->adsl2DiagnosticMessages.cMsg5Ld,CMSG5LD_SIZE); -+ ptidsl->adsl2DiagnosticMessages.cMsg5LdLen = CMSG5LD_SIZE; -+ break; -+ default: -+ dprintf(5,"Unknown ADSL2 Message rec'd\n"); -+ break; -+ } -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_getAdsl2MessageLocation() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Gets the address to the ADSL2 Message being looked up -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset) -+{ -+ int rc=0; -+ -+ DEV_HOST_dspOamSharedInterface_t *pSharedInterface, sharedInterface; -+ DEV_HOST_dspWrNegoParaDef_t dspNegoPara; -+ int adsl2MsgString, adsl2MsgAddr; -+ -+ pSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; -+ rc += dslhal_support_blockRead(pSharedInterface, &sharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ sharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_adsl2ByteSwap32((unsigned int)sharedInterface.dspWriteNegoParams_p); -+ rc += dslhal_support_blockRead((PVOID)sharedInterface.dspWriteNegoParams_p,&dspNegoPara, sizeof(DEV_HOST_dspWrNegoParaDef_t)); -+ -+ if (rc) -+ { -+ dprintf(1,"dslhal_support_blockRead failed\n"); -+ return DSLHAL_ERROR_BLOCK_READ; -+ } -+ -+ adsl2MsgString = dslhal_support_adsl2ByteSwap32((unsigned int)dspNegoPara.adsl2DeltMsgs_p); -+ dprintf(5,"ADSL2 Message String Address: 0x%x\n",adsl2MsgString); -+ rc += dslhal_support_blockRead((PVOID)(adsl2MsgString + -+ ((sizeof(unsigned char *)*msgOffset))), -+ &adsl2MsgAddr, sizeof(int)); -+ adsl2MsgAddr = dslhal_support_adsl2ByteSwap32((unsigned int)adsl2MsgAddr); -+ dprintf(5," Message Address: 0x%x\n",adsl2MsgAddr); -+ -+ if(rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ else -+ return adsl2MsgAddr; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_getCMsgsRa() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Training Message functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg) -+{ -+ int rc=0; -+ DEV_HOST_raMsgsDef_t raMsgParms; -+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface; -+ rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ -+ dspOamSharedInterface.raMsgs_p = (DEV_HOST_raMsgsDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.raMsgs_p); -+ -+ rc += dslhal_support_blockRead((PVOID)dspOamSharedInterface.raMsgs_p, -+ &raMsgParms, sizeof(DEV_HOST_raMsgsDef_t)); -+ shim_osMoveMemory((void *)cMsg,(void *)raMsgParms.cMsgsRaString,6); -+ -+ if(rc) -+ return DSLHAL_ERROR_CONFIG_API_FAILURE; -+ else -+ return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherRateMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Gathers Rate Training Messages -+* Input -+* tidsl_t *ptidsl : Pointer to application structure -+* -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherRateMessages(tidsl_t * ptidsl) -+{ -+ int rc; -+ DEV_HOST_dspWrNegoParaDef_t negoParms; -+ DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface; -+ -+ dprintf(1, "dslhal_support_gatherRateMessages\n"); -+ -+ rc += dslhal_support_blockRead(ptidsl->pmainAddr, &dspOamSharedInterface,sizeof(DEV_HOST_dspOamSharedInterface_t)); -+ dspOamSharedInterface.dspWriteNegoParams_p = (DEV_HOST_dspWrNegoParaDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.dspWriteNegoParams_p); -+ -+ rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.dspWriteNegoParams_p, &negoParms, sizeof(DEV_HOST_dspWrNegoParaDef_t)); -+ if (rc) -+ return DSLHAL_ERROR_BLOCK_READ; -+ else -+ { -+ shim_osMoveMemory((void *)ptidsl->AppData.bCRates1, (void *)negoParms.cRates1, 120); -+ shim_osMoveMemory((void *)ptidsl->AppData.bRRates1, (void *)negoParms.rRates1, 44); -+ } -+return DSLHAL_ERROR_NO_ERRORS; -+} -+ -+static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits) -+{ -+ int out32Bits=0; -+ -+#ifdef EB -+ out32Bits = (in32Bits << 24); -+ out32Bits |=((in32Bits & 0x0000ff00) << 8); -+ out32Bits |=((in32Bits & 0xff000000) >> 24); -+ out32Bits |=((in32Bits & 0x00ff0000) >> 8); -+#else -+ out32Bits = in32Bits; -+#endif -+ -+ return out32Bits; -+ -+} /* end of dslhal_support_byteSwap32() */ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_support.h linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h ---- linux.old/drivers/atm/sangam_atm/dsl_hal_support.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_support.h 2005-08-23 04:46:50.101843088 +0200 -@@ -0,0 +1,718 @@ -+#ifndef DSL_HAL_SUPPORT_H__ -+#define DSL_HAL_SUPPORT_H__ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: DSL Driver API functions for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_hal_functiondefines.c -+* -+* DESCRIPTION: -+* Contains basic DSL HAL API declarations for Sangam -+* -+* -+* (C) Copyright 2001-02, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 06Feb03 0.00.00 RamP Created -+* 21Mar03 0.00.01 RamP Removed byteswap functions -+* 21Mar03 0.00.02 RamP Added extern osFreeVMemory declaration -+* 10Apr03 0.00.03 RamP Changed declaration for loadFWImage & -+* loadDebugFWImage to remove ptidsl param -+* 12Apr03 0.00.04 RamP Added function to set Interrupt Bit -+* Masks for bitfield & Mailboxes -+* 14Apr03 0.00.05 RamP Added modem state bit field processing -+* 15Apr03 0.00.06 RamP Added function osAllocateVMemory -+* 21Apr03 0.01.00 RamP Added function osAllocateDmaMemory -+* Added function osFreeDmaMemory -+* (Alpha) Added macro virtual2Physical, -+* 22Apr03 0.01.01 RamP Moved acknowledgeInterrupt to api.h -+* 24Apr03 0.01.02 RamP Added checkOvelayPage function -+* 29May03 0.01.03 RamP Added critical enter/exit function decl -+* 06Jun03 0.01.04 RamP Added Interrupt source parsing function -+* 06Oct03 0.01.05 RamP Added function abstraction switches -+* 12Oct03 0.01.06 RamP Added ADSL2 Message function prototypes -+* 14Nov03 0.03.07 RamP Added function to gather Rate Messages -+*******************************************************************************/ -+ -+#include "dsl_hal_api.h" -+ -+#define virtual2Physical(a) (((int)a)&~0xe0000000) -+/* External Function Prototype Declarations */ -+ -+extern unsigned int shim_osGetCpuFrequency(void); -+extern void shim_osClockWait(int val); -+extern unsigned int shim_osClockTick(void); -+ -+extern int shim_osStringCmp(const char *s1, const char *s2); -+ -+extern void dprintf( int uDbgLevel, char * szFmt, ...); -+ -+extern int shim_osLoadFWImage(unsigned char *firmwareImage); -+extern int shim_osLoadDebugFWImage(unsigned char *debugFirmwareImage); -+extern unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength); -+extern void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes); -+extern void shim_osZeroMemory(char *dst, unsigned int numBytes); -+ -+extern void *shim_osAllocateMemory(unsigned int size); -+extern void *shim_osAllocateVMemory(unsigned int size); -+extern void *shim_osAllocateDmaMemory(unsigned int size); -+ -+extern void shim_osFreeMemory(void *ptr, unsigned int size); -+extern void shim_osFreeVMemory(void *ptr, unsigned int size); -+extern void shim_osFreeDmaMemory(void *ptr, unsigned int size); -+ -+extern void shim_osWriteBackCache(void *pMem, unsigned int size); -+extern void shim_osCriticalEnter(void); -+extern void shim_osCriticalExit(void); -+ -+ -+/******************************************************************************************* -+* FUNCTION NAME: dslhal_support_writeHostMailbox -+* -+******************************************************************************************** -+* DESCRIPTION: Send a message to a mailbox -+* -+* ARGUMENTS: int cmd command to write -+* int tag tag (currently unused) -+* int p1 parameter 1 (currently unused) -+* int p2 parameter 2 (currently unused) -+* -+* RETURNS: 0 if successful -+* NZ otherwise -+* -+*******************************************************************************************/ -+ -+int dslhal_support_writeHostMailbox -+(tidsl_t *ptidsl, -+ int cmd, -+ int tag, -+ int p1, -+ int p2); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readDspMailbox -+* -+********************************************************************************************* -+* DESCRIPTION: Reads a message from the mailbox -+* -+* ARGUMENTS: int *pcmd Pointer to command read -+* -+* RETURNS: 0 if successful -+* 1 if no mail -+* NZ otherwise -+* -+*****************************************************************************************/ -+ -+int dslhal_support_readDspMailbox -+(tidsl_t *ptidsl, -+ int *pcmd, -+ int *ptag, -+ int *pprm1, -+ int *pprm2); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readTextMailbox -+* -+********************************************************************************************* -+* DESCRIPTION: Reads a message from the mailbox -+* -+* ARGUMENTS: int *pcmd Pointer to command read -+* -+* RETURNS: 0 if successful -+* 1 if no mail -+* NZ otherwise -+* -+*****************************************************************************************/ -+ -+int dslhal_support_readTextMailbox -+(tidsl_t *ptidsl, -+ int *pmsg1, -+ int *pmsg2); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_blockRead -+* -+********************************************************************************************* -+* DESCRIPTION: This rouin simulates DSP memory read as done in ax5 pci nic card -+* -+* INPUT: void *addr, memory address to be read -+* void *buffer, dat buffer to be filled with from memmory -+* size_t count, number of bytes to be written -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_support_blockRead -+(void *addr, -+ void *buffer, -+ size_t count); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_blockWrite -+* -+******************************************************************************************* -+* DESCRIPTION: This rouin simulates DSP memory write as done in ax5 pci nic card -+* -+* INPUT: void *buffer, data need to written -+* void *adde, memory address to be written -+* size_t count, number of bytes to be written -+* -+* RETURN: 0 --succeeded -+* 1 --Failed -+* -+*****************************************************************************************/ -+ -+int dslhal_support_blockWrite -+(void *buffer, -+ void *addr, -+ size_t count); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_hostDspAddressTranslate -+* -+******************************************************************************************* -+* DESCRIPTION: This function moves the address window to translate physical address -+* -+* INPUT: unsigned int addr : address that requires translation -+* -+* RETURN: Translated address or error condition -+* -+* -+*****************************************************************************************/ -+ -+unsigned int dslhal_support_hostDspAddressTranslate -+( unsigned int addr -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_unresetDslSubsystem -+* -+******************************************************************************************* -+* DESCRIPTION: This function unreset Dsl Subsystem -+* -+* INPUT: None -+* -+* RETURN: 0 if Pass; 1 if Fail -+* -+*****************************************************************************************/ -+int dslhal_support_unresetDslSubsystem -+(void -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_unresetDsp() -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction takes ax5 daugter board out of reset. -+* -+* INPUT: None -+* -+* RETURN: 0 --successful. -+* 1 --failed -+* -+*****************************************************************************************/ -+int dslhal_support_unresetDsp -+(void -+); -+ -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_resetDslSubsystem -+* -+******************************************************************************************* -+* DESCRIPTION: This function unreset Dsl Subsystem -+* -+* INPUT: None -+* -+* RETURN: 0 if Pass; 1 if Fail -+* -+*****************************************************************************************/ -+int dslhal_support_resetDslSubsystem -+(void -+); -+ -+/****************************************************************************************** -+* FUNCTION NAME: dslhal_support_resetDsp() -+* -+******************************************************************************************* -+* DESCRIPTION: This fuction takes ax5 daugter board out of reset. -+* -+* INPUT: None -+* -+* RETURN: 0 --successful. -+* 1 --failed -+* -+*****************************************************************************************/ -+int dslhal_support_resetDsp -+(void -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_hostDspCodeDownload() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_hostDspCodeDownload -+(tidsl_t * ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_digi_assignMemTestSpace() -+* -+********************************************************************************************* -+* DESCRIPTION: Assigns Memory Space in SDRAM for External Memory Test -+* Input: tidsl_t *ptidsl -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_digi_assignMemTestSpace -+(tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_digi_readMemTestResult() -+* -+********************************************************************************************* -+* DESCRIPTION: Reads Results of External Memory Test -+* Input: tidsl_t *ptidsl -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_digi_readMemTestResult -+(tidsl_t *ptidsl, -+unsigned int testResult -+); -+ -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_codeDownload() -+* -+********************************************************************************************* -+* DESCRIPTION: Brings DSLSS out of Reset, Downloads Diag Firmware, -+* brings DSP out of Reset -+* Input: tidsl_t *ptidsl -+* -+* Return: 0 success -+* 1 failed -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_codeDownload -+(tidsl_t *ptidsl, -+unsigned char* missingTones -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_setPgaParams() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Tones selects the . -+* Return: NULL -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_anlg_setPgaParams -+(tidsl_t *ptidsl, -+int agcFlag, -+short pga1, -+short pga2, -+short pga3, -+short aeq -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_getRxNoisePower() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Tones selects the . -+* Return: NULL -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_anlg_getRxNoisePower -+(tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_diags_anlg_setMissingTones() -+* -+********************************************************************************************* -+* DESCRIPTION: This function instructs the Transciever to transmit the Reverb with missing -+* tones and Medley's with missing tones. These signals are defined in ITU -+* G.992.1 ADSL Standards. -+* -+* Input: Test selects between the Reverb or Medley tests. 0 - Reverb, 1 - Medley -+* Tones selects the . -+* Return: NULL -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_diags_anlg_setMissingTones -+(tidsl_t *ptidsl, -+unsigned char* missingTones -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_readDelineationState() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_readDelineationState -+(tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_processModemStateBitField() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* download DSP image from host memory to dsp memory -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_processModemStateBitField -+(tidsl_t *ptidsl -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_setInterruptMask() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_setInterruptMask -+(tidsl_t * ptidsl, -+unsigned int inputMask -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_computeCrc32() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data -+* -+* Return: 32 bit CRC of the input data -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_computeCrc32 -+(unsigned char *data, -+int len -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_checkOverlayPage() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_checkOverlayPage -+(tidsl_t *ptidsl, -+unsigned int tag -+); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_restoreTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_restoreTrainingInfo(tidsl_t * ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_reloadTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_reloadTrainingInfo(tidsl_t * ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_clearTrainingInfo() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Computes the CRC-32 for the input data and compares it with reference -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+int dslhal_support_clearTrainingInfo(tidsl_t * ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_parseInterruptSource() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Sets the host interrupt bit masks -+* -+* Return: 0 success -+* 1 failed -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_parseInterruptSource(tidsl_t * ptidsl); -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_advancedIdleProcessing() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Idle State Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_advancedIdleProcessing(tidsl_t *ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_aocBitSwapProcessing() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Bitswap buffer Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_aocBitSwapProcessing(tidsl_t *ptidsl,unsigned int usDs); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherEocMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced EOC Buffering functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherEocMessages(tidsl_t *ptidsl,int usDs, int msgPart1, int msgPart2); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherSnrPerBin() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Snr per bin buffering Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherSnrPerBin(tidsl_t *ptidsl,unsigned int snrParm); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_processTrainingState() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Training State Processing Functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_processTrainingState(tidsl_t *ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherAdsl2Messages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced EOC Buffering functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherAdsl2Messages(tidsl_t *ptidsl,int msgTag, int param1, int param2); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_getAdsl2MsgLocation() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Gets the address to the ADSL2 Message being looked up -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_getAdsl2MessageLocation(tidsl_t *ptidsl,int msgOffset); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_getCMsgsRa() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Calls Advanced Training Message functions -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_getCMsgsRa(tidsl_t *ptidsl,void *cMsg); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_gatherRateMessages() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* Gathers Advanced Training Messages -+* -+* Return: Error Condition (if any) -+* -+* -+* NOTE: -+* DSP image is based on LITTLE endian -+* -+********************************************************************************************/ -+unsigned int dslhal_support_gatherRateMessages(tidsl_t *ptidsl); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_byteSwap16() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* byteswap a short -+* -+* INPUT: -+* Return: NULL -+* -+********************************************************************************************/ -+ -+unsigned short dslhal_support_byteSwap16(unsigned short in16Bits); -+ -+/******************************************************************************************** -+* FUNCTION NAME: dslhal_support_byteSwap32() -+* -+********************************************************************************************* -+* DESCRIPTION: -+* byteswap a word -+* -+* INPUT: -+* Return: NULL -+* -+********************************************************************************************/ -+ -+unsigned int dslhal_support_byteSwap32(unsigned int in32Bits); -+ -+#endif /* Pairs #ifndef DSL_HAL_FUNCTIONDEFINES_H__ */ -diff -urN linux.old/drivers/atm/sangam_atm/dsl_hal_version.h linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h ---- linux.old/drivers/atm/sangam_atm/dsl_hal_version.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/dsl_hal_version.h 2005-08-23 04:46:50.102842936 +0200 -@@ -0,0 +1,94 @@ -+#ifndef __SYSSW_VERSION_H__ -+#define __SYSSW_VERSION_H__ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: DSL Driver API functions for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_hal_basicapi.c -+* -+* DESCRIPTION: -+* Contains basic DSL HAL APIs for Sangam -+* -+* (C) Copyright 2003-04, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 14May03 0.00.00 RamP Original Version Created -+* 14May03 0.00.01 RamP Initial Rev numbers inserted -+* 14May03 0.00.02 RamP Bumped version numbers for Dsl Hal -+* & dhalapp for alpha plus -+* 19May03 0.00.03 MCB Bumped dslhal version number -+* because of dependant changes -+* wrt. linux-nsp atm drivers. -+* 22May03 0.00.04 RamP Bumped dslhal & dhalapp buildnum -+* for inner/outer pair & DGASP code -+* 06Jun03 0.00.05 RamP Bumped up buildnum for LED, STM, -+* interrupt processing, statistics -+* and other pre-beta features -+* 09Jun03 0.00.06 JEB Fixed error in DHALAPP bugfix/buildnum -+* 09Jun03 0.00.07 RamP Bumped up buildnum for incremental -+* changes to apis, statistics, memory -+* fixes, parameter configurations -+* 11Jun03 0.00.08 RamP Bumped up buildnum for Co profile -+* free memory fix -+* 12Jun03 0.00.09 JEB Bumped version numbers for AR7 1.00 Beta -+* 02Jul03 0.00.10 ZT Bumped HAL version for overlay page -+* 18Jul03 0.00.11 RamP Bumped HAL version for analog diags -+* 22Jul03 0.00.12 JEB Bumped DHALAPP buildnum for analog diags -+* 31Jul03 0.00.13 RamP Bumped HAL version for engr. drop -+* 04Aug03 0.00.14 JEB Bumped HAL version buildnum for CHECKPOINT65 changes -+* Bumped LINUX version buildnum for CHECKPOINT65 changes -+* 06Aug03 0.00.15 MCB Bumped all version numbers in prep for AR7 1.0 R2 release for POTS. -+* 13Aug03 0.00.16 MCB Set rev id's for D3/R1.1 (ADSL2). -+* 21Aug03 0.00.17 JEB Bumped up build numbers for merge of code additions from D1 -+* 26Sep03 0.00.18 JEB Set rev id's for another D3/R1 (ADSL2). -+* 14Oct03 0.00.19 JEB Bumped Linux minor number and reset bugfix number for release. -+* Bumped build numbers on DSLHAL and DHALAPP for this checkpoint. -+* 14Oct03 0.00.20 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15. -+* 21Oct03 0.00.21 JEB Bumped build number on DSLHAL for CHECKPOINT16. -+* 22Oct03 0.00.22 MCB Bumped all version numbers in support of D3R1 release. -+* 27Oct03 0.00.23 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19. -+* Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0. -+* 30Oct03 0.00.24 JEB Bumped bugfix number on LINUXATM Version for next release. -+* Bumped build numbers on DSLHAL and DHALAPP -+* 31Oct03 0.00.25 MCB Bumped all version numbers in support of D3R2 release. -+* 14Nov03 0.00.26 JEB Bumped build numbers on DSLHAL and DHALAPP -+* Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0 -+* 20Nov03 0.00.27 JEB Bumped build number on DSLHAL. -+* Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2 -+* 21Nov03 0.00.28 MCB Bumped all version numbers in support of D3R2 release. -+* 21Nov03 0.00.29 JEB Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21. -+* 16Dec03 0.00.30 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31. -+* 21Dec03 0.00.31 MCB Bumped all version numbers in support of D3R2 release. -+* 05Jan04 0.00.32 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34. -+* 15Jan04 0.00.33 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36. -+* 26Jan04 0.00.34 JEB Changed Linux ATM version number to be 04.02.03.00. -+* 27Jan04 0.00.35 MCB Bumped all version numbers in support of D3R2 release. -+*******************************************************************************/ -+ -+/* Dsl Hal API Version Numbers */ -+#define DSLHAL_VERSION_MAJOR 03 -+#define DSLHAL_VERSION_MINOR 00 -+#define DSLHAL_VERSION_BUGFIX 06 -+#define DSLHAL_VERSION_BUILDNUM 00 -+#define DSLHAL_VERSION_TIMESTAMP 00 -+ -+/* dhalapp Adam2 Application Version Numbers */ -+#define DHALAPP_VERSION_MAJOR 03 -+#define DHALAPP_VERSION_MINOR 00 -+#define DHALAPP_VERSION_BUGFIX 05 -+#define DHALAPP_VERSION_BUILDNUM 00 -+ -+/* Linux ATM Driver Version Numbers */ -+#define LINUXATM_VERSION_MAJOR 04 -+#define LINUXATM_VERSION_MINOR 02 -+#define LINUXATM_VERSION_BUGFIX 04 -+#define LINUXATM_VERSION_BUILDNUM 00 -+ -+/* DSL Agent Version Numbers */ -+#define DSLAGENT_VERSION_MAJOR 02 -+#define DSLAGENT_VERSION_MINOR 00 -+#define DSLAGENT_VERSION_BUGFIX 02 -+#define DSLAGENT_VERSION_BUILDNUM 00 -+ -+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */ -diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h ---- linux.old/drivers/atm/sangam_atm/ec_errors_cpaal5.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpaal5.h 2005-08-23 04:46:50.102842936 +0200 -@@ -0,0 +1,118 @@ -+/*************************************************************************** -+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved. -+ -+ FILE: ec_errors.h -+ -+ DESCRIPTION: -+ This file contains definitions and function declarations for -+ error code support. -+ -+ HISTORY: -+ 14Dec00 MJH Added masking to EC_CLASS etc macros -+ 17Sep02 GSG Added HAL support (new class&devices) -+ 03Oct02 GSG Removed C++ style comments -+***************************************************************************/ -+#ifndef _INC_EC_ERRORS -+#define _INC_EC_ERRORS -+ -+/* -+ 31 - CRITICAL -+ 30-28 - CLASS (ie. DIAG, KERNEL, FLASH, etc) -+ 27-24 - INSTANCE (ie. 1, 2, 3, etc ) -+ 23-16 - DEVICE (ie. EMAC, IIC, etc) -+ 15-08 - FUNCTION (ie. RX, TX, INIT, etc) -+ 07-00 - ERROR CODE (ie. NO_BASE, FILE_NOT_FOUND, etc ) -+*/ -+ -+/*--------------------------------------------------------------------------- -+ Useful defines for accessing fields within error code -+---------------------------------------------------------------------------*/ -+#define CRITICAL_SHIFT 31 -+#define CLASS_SHIFT 28 -+#define INST_SHIFT 24 -+#define DEVICE_SHIFT 16 -+#define FUNCTION_SHIFT 8 -+#define ERROR_CODE_SHIFT 0 -+ -+#define CRITICAL_MASK 1 -+#define CLASS_MASK 0x07 -+#define DEVICE_MASK 0xFF -+#define INST_MASK 0x0F -+#define FUNCTION_MASK 0xFF -+#define ERROR_CODE_MASK 0xFF -+ -+#define EC_CLASS(val) ((val&CLASS_MASK) << CLASS_SHIFT) -+#define EC_DEVICE(val) ((val&DEVICE_MASK) << DEVICE_SHIFT) -+#define EC_INST(val) ((val&INST_MASK) << INST_SHIFT) -+#define EC_FUNC(val) ((val&FUNCTION_MASK) << FUNCTION_SHIFT) -+#define EC_ERR(val) ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT) -+ -+/*--------------------------------------------------------------------------- -+ Operation classes -+---------------------------------------------------------------------------*/ -+#define EC_HAL EC_CLASS(0) -+#define EC_DIAG EC_CLASS(8) -+ -+/*--------------------------------------------------------------------------- -+ Device types -+---------------------------------------------------------------------------*/ -+#define EC_DEV_EMAC EC_DEVICE(1) -+#define EC_DEV_IIC EC_DEVICE(2) -+#define EC_DEV_RESET EC_DEVICE(3) -+#define EC_DEV_ATMSAR EC_DEVICE(4) -+#define EC_DEV_MEM EC_DEVICE(5) -+#define EC_DEV_DES EC_DEVICE(6) -+#define EC_DEV_DMA EC_DEVICE(7) -+#define EC_DEV_DSP EC_DEVICE(8) -+#define EC_DEV_TMR EC_DEVICE(9) -+#define EC_DEV_WDT EC_DEVICE(10) -+#define EC_DEV_DCL EC_DEVICE(11) -+#define EC_DEV_BBIF EC_DEVICE(12) -+#define EC_DEV_PCI EC_DEVICE(13) -+#define EC_DEV_XBUS EC_DEVICE(14) -+#define EC_DEV_DSLIF EC_DEVICE(15) -+#define EC_DEV_USB EC_DEVICE(16) -+#define EC_DEV_CLKC EC_DEVICE(17) -+#define EC_DEV_RAPTOR EC_DEVICE(18) -+#define EC_DEV_DSPC EC_DEVICE(19) -+#define EC_DEV_INTC EC_DEVICE(20) -+#define EC_DEV_GPIO EC_DEVICE(21) -+#define EC_DEV_BIST EC_DEVICE(22) -+#define EC_DEV_HDLC EC_DEVICE(23) -+#define EC_DEV_UART EC_DEVICE(24) -+#define EC_DEV_VOIC EC_DEVICE(25) -+/* 9.17.02 (new HAL modules) */ -+#define EC_DEV_CPSAR EC_DEVICE(0x1A) -+#define EC_DEV_AAL5 EC_DEVICE(0x1B) -+#define EC_DEV_AAL2 EC_DEVICE(0x1C) -+#define EC_DEV_CPMAC EC_DEVICE(0x1D) -+#define EC_DEV_VDMA EC_DEVICE(0x1E) -+#define EC_DEV_VLYNQ EC_DEVICE(0x1F) -+#define EC_DEV_CPPI EC_DEVICE(0x20) -+#define EC_DEV_CPMDIO EC_DEVICE(0x21) -+ -+/*--------------------------------------------------------------------------- -+ Function types -+---------------------------------------------------------------------------*/ -+#define EC_FUNC_READ_CONF EC_FUNC(1) -+#define EC_FUNC_INIT EC_FUNC(2) -+ -+/*--------------------------------------------------------------------------- -+ Error codes -+---------------------------------------------------------------------------*/ -+#define EC_CRITICAL (1<<CRITICAL_SHIFT) -+#define EC_NO_ERRORS 0 -+#define EC_VAL_NO_BASE EC_ERR(1) -+#define EC_VAL_NO_RESET_BIT EC_ERR(2) -+#define EC_VAL_NO_RESET EC_ERR(3) -+#define EC_VAL_BAD_BASE EC_ERR(4) -+#define EC_VAL_MALLOCFAILED EC_ERR(5) -+#define EC_VAL_NO_RESETBASE EC_ERR(6) -+#define EC_DEVICE_NOT_FOUND EC_ERR(7) -+ -+/*--------------------------------------------------------------------------- -+ Function declarations -+---------------------------------------------------------------------------*/ -+extern void ec_log_error( unsigned int ); -+ -+#endif /* _INC_EC_ERRORS */ -diff -urN linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h ---- linux.old/drivers/atm/sangam_atm/ec_errors_cpsar.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/ec_errors_cpsar.h 2005-08-23 04:46:50.102842936 +0200 -@@ -0,0 +1,118 @@ -+/*************************************************************************** -+ Copyright(c) 2001, Texas Instruments Incorporated. All Rights Reserved. -+ -+ FILE: ec_errors.h -+ -+ DESCRIPTION: -+ This file contains definitions and function declarations for -+ error code support. -+ -+ HISTORY: -+ 14Dec00 MJH Added masking to EC_CLASS etc macros -+ 17Sep02 GSG Added HAL support (new class&devices) -+ 03Oct02 GSG Removed C++ style comments -+***************************************************************************/ -+#ifndef _INC_EC_ERRORS -+#define _INC_EC_ERRORS -+ -+/* -+ 31 - CRITICAL -+ 30-28 - CLASS (ie. DIAG, KERNEL, FLASH, etc) -+ 27-24 - INSTANCE (ie. 1, 2, 3, etc ) -+ 23-16 - DEVICE (ie. EMAC, IIC, etc) -+ 15-08 - FUNCTION (ie. RX, TX, INIT, etc) -+ 07-00 - ERROR CODE (ie. NO_BASE, FILE_NOT_FOUND, etc ) -+*/ -+ -+/*--------------------------------------------------------------------------- -+ Useful defines for accessing fields within error code -+---------------------------------------------------------------------------*/ -+#define CRITICAL_SHIFT 31 -+#define CLASS_SHIFT 28 -+#define INST_SHIFT 24 -+#define DEVICE_SHIFT 16 -+#define FUNCTION_SHIFT 8 -+#define ERROR_CODE_SHIFT 0 -+ -+#define CRITICAL_MASK 1 -+#define CLASS_MASK 0x07 -+#define DEVICE_MASK 0xFF -+#define INST_MASK 0x0F -+#define FUNCTION_MASK 0xFF -+#define ERROR_CODE_MASK 0xFF -+ -+#define EC_CLASS(val) ((val&CLASS_MASK) << CLASS_SHIFT) -+#define EC_DEVICE(val) ((val&DEVICE_MASK) << DEVICE_SHIFT) -+#define EC_INST(val) ((val&INST_MASK) << INST_SHIFT) -+#define EC_FUNC(val) ((val&FUNCTION_MASK) << FUNCTION_SHIFT) -+#define EC_ERR(val) ((val&ERROR_CODE_MASK) << ERROR_CODE_SHIFT) -+ -+/*--------------------------------------------------------------------------- -+ Operation classes -+---------------------------------------------------------------------------*/ -+#define EC_HAL EC_CLASS(0) -+#define EC_DIAG EC_CLASS(8) -+ -+/*--------------------------------------------------------------------------- -+ Device types -+---------------------------------------------------------------------------*/ -+#define EC_DEV_EMAC EC_DEVICE(1) -+#define EC_DEV_IIC EC_DEVICE(2) -+#define EC_DEV_RESET EC_DEVICE(3) -+#define EC_DEV_ATMSAR EC_DEVICE(4) -+#define EC_DEV_MEM EC_DEVICE(5) -+#define EC_DEV_DES EC_DEVICE(6) -+#define EC_DEV_DMA EC_DEVICE(7) -+#define EC_DEV_DSP EC_DEVICE(8) -+#define EC_DEV_TMR EC_DEVICE(9) -+#define EC_DEV_WDT EC_DEVICE(10) -+#define EC_DEV_DCL EC_DEVICE(11) -+#define EC_DEV_BBIF EC_DEVICE(12) -+#define EC_DEV_PCI EC_DEVICE(13) -+#define EC_DEV_XBUS EC_DEVICE(14) -+#define EC_DEV_DSLIF EC_DEVICE(15) -+#define EC_DEV_USB EC_DEVICE(16) -+#define EC_DEV_CLKC EC_DEVICE(17) -+#define EC_DEV_RAPTOR EC_DEVICE(18) -+#define EC_DEV_DSPC EC_DEVICE(19) -+#define EC_DEV_INTC EC_DEVICE(20) -+#define EC_DEV_GPIO EC_DEVICE(21) -+#define EC_DEV_BIST EC_DEVICE(22) -+#define EC_DEV_HDLC EC_DEVICE(23) -+#define EC_DEV_UART EC_DEVICE(24) -+#define EC_DEV_VOIC EC_DEVICE(25) -+/* 9.17.02 (new HAL modules) */ -+#define EC_DEV_CPSAR EC_DEVICE(0x1A) -+#define EC_DEV_AAL5 EC_DEVICE(0x1B) -+#define EC_DEV_AAL2 EC_DEVICE(0x1C) -+#define EC_DEV_CPMAC EC_DEVICE(0x1D) -+#define EC_DEV_VDMA EC_DEVICE(0x1E) -+#define EC_DEV_VLYNQ EC_DEVICE(0x1F) -+#define EC_DEV_CPPI EC_DEVICE(0x20) -+#define EC_DEV_CPMDIO EC_DEVICE(0x21) -+ -+/*--------------------------------------------------------------------------- -+ Function types -+---------------------------------------------------------------------------*/ -+#define EC_FUNC_READ_CONF EC_FUNC(1) -+#define EC_FUNC_INIT EC_FUNC(2) -+ -+/*--------------------------------------------------------------------------- -+ Error codes -+---------------------------------------------------------------------------*/ -+#define EC_CRITICAL (1<<CRITICAL_SHIFT) -+#define EC_NO_ERRORS 0 -+#define EC_VAL_NO_BASE EC_ERR(1) -+#define EC_VAL_NO_RESET_BIT EC_ERR(2) -+#define EC_VAL_NO_RESET EC_ERR(3) -+#define EC_VAL_BAD_BASE EC_ERR(4) -+#define EC_VAL_MALLOCFAILED EC_ERR(5) -+#define EC_VAL_NO_RESETBASE EC_ERR(6) -+#define EC_DEVICE_NOT_FOUND EC_ERR(7) -+ -+/*--------------------------------------------------------------------------- -+ Function declarations -+---------------------------------------------------------------------------*/ -+extern void ec_log_error( unsigned int ); -+ -+#endif /* _INC_EC_ERRORS */ -diff -urN linux.old/drivers/atm/sangam_atm/env_def_defines.h linux.dev/drivers/atm/sangam_atm/env_def_defines.h ---- linux.old/drivers/atm/sangam_atm/env_def_defines.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/env_def_defines.h 2005-08-23 04:46:50.103842784 +0200 -@@ -0,0 +1,926 @@ -+#ifndef __ENV_DEF_DEFINES_H__ -+#define __ENV_DEF_DEFINES_H__ 1 -+ -+//******************************************************************** -+//* DMT-BASE ADSL MODEM PROGRAM -+//* TEXAS INSTRUMENTS PROPRIETARTY INFORMATION -+//* AMATI CONFIDENTIAL PROPRIETARY -+//* -+//* (c) Copyright May 1999, Texas Instruments Incorporated. -+//* All Rights Reserved. -+//* -+//* Property of Texas Instruments Incorporated and Amati Communications Corp. -+//* -+//* Restricted Rights - Use, duplication, or disclosure is subject to -+//* restrictions set forth in TI's and Amati program license agreement and -+//* associated documentation -+//* -+//********************************************************************* -+//* -+//* FILENAME: dpsys_defines.h -+//* -+//* ABSTRACT: This file provides a mechanism for defining standard -+//* preprocessor flag sets for datapump. -+//* -+//* TARGET: Non specific. -+//* -+//* TOOLSET: Non specific. -+//* -+//* ACTIVATION: -+//* -+//* HISTORY: DATE AUTHOR DESCRIPTION -+//* 05/11/99 FLW Created -+//* 01/21/00 FLW derfmake changes -+//* 02/07/00 FLW/M.Seidl added _debug targets -+//* 02/23/00 FLW/M.Barnett merged in from G.lite branch -+//* 03/03/00 FLW/M.Barnett added TRELLIS token -+//* 05/11/00 Barnett Added ap036btp & ap037btp support. -+//* 02/07/00 M.Seidl added HW_TEQ, HW_DEC and DC_BIAS tokens -+//* 02/28/00 Derf/Seidl Mod's in support of suppressing compiler warnings for empty source files -+//* 02/28/00 M. Seidl added SWTC token -+//* 02/28/00 M. Seidl added ap0501tp and its _debug target -+//* 03/03/00 M. Seidl added MODPILOT token, ap0307tp_debug has SWDI and FDD enabled -+//* 03/08/00 Jack Huang Added HWRSDEC token -+//* 03/29/00 Derf/Seidl Mod's in support Soft-TC and derfmake -+//* 04/10/00 Jack Huang Added PCIMASTER token -+//* 04/11/00 Jack Huang Added STBFIX token -+//* 04/24/00 M. Seidl ap0500tp has OLAYDP turned on, ap0500tp_debug has OLAYDP turned off now -+//* 04/28/00 M.Seidl added KAPIL token for ap0501tp targets -+//* 06/02/00 P.Sexton Added OAM_EOC token -+//* 06/06/00 M. Seidl added au0501tp target -+//* 06/12/00 Michael Seidl activated h/w TEQ for KAPIL targets, disabled STBFIX for all targets -+//* 06/14/00 Derf added ap0308tp, alphabetized token lists -+//* 06/16/00 Jack Huang added au0501tp_debug target -+//* 06/22/00 M. Seidl Enabled code overlays through EMIF from external memory. Now there are 3 -+//* different code overlay schemes that are differentiated by the following tokens: -+//* OLAYDP_PCI: uses PCI DMA in PCI Master Mode -+//* OLAYDP_HOST: Host downloads overlay code into DMEM upon request from DSP -+//* OLAYDP_EMIF: Host downloads overlay code into ext. mem at boot-time. DSP uses -+//* DMA channel 0 to load code into on-chip PMEM -+//* OLAYDP: turns overlays generally on or off -+//* 07/15/00 B.Srinivasan Cleaned up default tokens and tokens for au0501tp, au0501tp_debug, -+//* ap0501tp and ap0501tp_debug targets as well -+//* 07/19/00 B.Srinivasan Made changes w.r.t cleaning/fixing Rufus Interrupt related code -+//* (changed token TC_INTRPT_RUFUS to INTRPT_RUFUS -+//* 06/14/00 Derf added au0501cp -+//* 08/12/00 Yinong Ding Added DPLL_MODE token. -+//* 08/16/00 F. Mujica Moved DOUBLE_XMT_RATE, RX_HPF, and LEAKY_LMS tokens here. -+//* 09/05/00 M. Seidl Changed ap0501tp back to do overlay through PCI (OLAY_PCI = 1) -+//* 09/11/00 M. Seidl moved USB and OLAYDP_HOST definitions to be CHIPSET specific, not target specific -+//* 09/21/00 U.Dasgupta/ Added a token for separate transmit and receive buffers. -+//* F.Mujica (SEPARATE_TX_RX_BUFFERS). -+//* 10/02/00 U.Dasgupta/ Added DPLL and SEPARATE_TX_RX_BUFFER tokens for au0502 target. -+//* F.Mujica -+//* 10/02/00 M. Castellano Added new tokens for new Host/EMIF DSP code overlay. -+//* OLAYDP_2STEP: Host downloads overlay code into ext. mem upon DSP request. DSP -+//* DMA channel 0 to load code into on-chip PMEM. It is a somewhat hybrid version -+//* of OLAYDP_HOST and OLAYDP_EMIF. The test target is ap0502tp. -+//* 10/25/00 Balaji Added tokens for arv500tp target -+//* 10/31/00 U. Iyer Added TEQ_AVG token and set it one for Ax5 -+//* 11/02/00 Barnett Added OAM_EOC=0 in defaults at bottom of file. -+//* 11/21/00 M. Seidl turned OLAYDP and AOC off for ap0307tp to make binary compatible w. whql'ed driver -+//* 11/28/00 Paul Hunt added FASTRETRAIN token for fast retrain specific code -+//* 11/28/00 Paul Hunt added PILOTDATA token to control channel estimation and transmission -+//* of data on the upstream pilot tone for ITU standard code loads -+//* 12/20/00 Jack Huang added EIGHTBITSRAM toekn for the targets that use 8-bit SRAM for -+//* interleaver/deinterleaver -+//* 01/11/01 U.Dasgupta Added mp targets and cleaned up GHS/PILOTDATA variables -+//* 01/23/01 U.Dasgupta Cleaned up code within GLITE tokens -+//* 01/23/00 Barnett Added in full EOC support for AP3/Ax5. Got rid of UTC. No longer needed. -+//* 02/08/01 Barnett Added DDC token. -+//* 03/09/01 Nirmal Warke Added in TOKEN definition for line diagnostics (LINE_DIAG): IMP DEPENDENCIES - -+//* TEQ_AVG must be off when LINE_DIAG is on (since they share a union buffer at the same time) -+//* 03/13/01 M. Seidl Recovered ap0500tp target. Added GHS token as PMEM saving option -+//* 03/14/01 Barnett Added ap0500mb target support. Look-and-feel is similar to ap0500tp. -+//* Added seperate-but-equal def's wrt. ISDN Annex B, Annex C, and PROP. -+//* 03/14/01 J. Bergsagel Added EXTERNBERT token. -+//* 03/15/01 Barnett/Balaji Merged AR5(H) -> 03.00.00 datapump. -+//* 03/16/01 Nirmal Warke Added in TOKEN definition for crosstalk performance mods (CROSSTALK): IMP DEPENDENCIES - -+//* TEQ_AVG must be off and LEAKY_LMS must be on when CROSSTALK is on -+//* 03/21/01 Barnett Added support for ar0500lp, ar0500mp, ar0500dp, arv500lp, arv500mp, and arv500dp. -+//* 03/26/01 M. Seidl enabled 64pt IFFT for ap0500mb (Raptor+AD11, FDM) -+//* 03/28/01 J. Bergsagel Removed EXTERNBERT token (now use host intf. var. instead) -+//* 04/03/01 J. Bergsagel Removed condition of DSPDP_CHIPSET_GEN==5 for default defines -+//* Removed LEAKY_LMS token (assumed always 1) -+//* Removed OLAYDP_HOST token (assumed always 0) -+//* Removed RX_HPF token (assumed always 1) -+//* Removed TRIBRID token (not used any more) -+//* Removed FDD token (assumed always 1) -+//* Removed HW_DEC token (assumed always 1) -+//* Removed HW_TEQ token (assumed always 1) -+//* Removed HWRSDEC token (assumed always 1) -+//* Removed ILEC_AD11_ALCATEL337 token (assumed always 0) -+//* Removed ILEC_AD11_HDSLNOISEFIX token (assumed always 0) -+//* Removed ILEC_AD11_MODULATEPILOT token (assumed always 0) -+//* Removed ILEC_AD11_NEWINTERPOLATE token (assumed always 0) -+//* Removed ILEC_AD11_USTXHPF token (assumed always 0) -+//* Removed SWDI token (assumed always 1) -+//* Removed TD_AGC token (assumed always 1) -+//* Removed DSPDP_LEGACY_TARGET token (assumed always 0) -+//* Removed AD11_20, AD11_20NL and AD11_20_NEWPREC token (always 1) -+//* Removed AI token (assumed always 1) -+//* Removed ATUC token (assumed always 0) -+//* Removed EU token (assumed always 0) -+//* Removed EVM2 token (assumed always 0) -+//* Removed INTRPT_RUFUS token (assumed always 0) -+//* Removed MODPILOT token (assumed always 0) -+//* Removed SL and SL_EVM tokens (assumed always 0) -+//* Removed STBIFX token (assumed always 0) -+//* Removed STD token (assumed always 1) -+//* Removed SWDI_LOOPBACK token (assumed always 0) -+//* Removed TID token (assumed always 0) -+//* Removed TII token (assumed always 1) -+//* Removed TIPCI token (assumed always 1) -+//* Removed UDI token (assumed always 1) -+//* Removed DC_BIAS token (assumed always 1) -+//* 04/05/01 Barnett Added DSPDP_ prefix to tokens that originate -+//* in the public interface. -+//* 05/07/01 Jack Huang Removed DOUBLE_XMT_RATE token. -+//* 05/16/01 Barnett Added back in EXTERNBERT token in support -+//* of saving PMEM. -+//* 06/05/01 Jack Huang Fixed the rules for ar0500mp_debug target -+//* 04/23/01 M. Halleck Merge Astro Wu's DDC enhancements -+//* 06/05/01 M. Capps Changed DSP_DEBUG to ENHANCED_SERIAL_DEBUG -+//* 07/03/01 M. Capps Replaced ESD token with !DDC, added DEV_DEBUG -+//* 06/26/01 J. Bergsagel Removed all the old ap03... stuff -+//* Removed OLAYDP_HOST token (again) -+//* Removed CROSSTALK token (assumed always 1) -+//* Removed TEQ_AVG token (assumed always 0) -+//* Removed DE token (assumed always 1) -+//* Removed PVAT token and au0501cp target -+//* Removed FASTRETRAIN token (assumed always 0) -+//* 07/05/01 J. Bergsagel Changed PCIMASTER token to TC_ATM_PCIMASTER -+//* 07/20/01 Umesh Iyer Added ATMBERT token. ATMBERT is conditional on SWTC definition. if SWTC is 0 -+//* ATMBERT should be 0. Else it can be 0/1. Default 0. -+//* 07/23/01 J. Bergsagel Changed name from defines_u.h to dpsys_defines.h -+//* 07/24/01 Barnett Added support for build of $(TARGET)_diag mfgr'ing targets. -+//* 08/02/01 Michael Seidl renamed KAPIL token to !AD1X -+//* 08/02/01 Michael Seidl renamed GHS token to PMEMSAVE_GHS -+//* 08/03/01 S.Yim Added MFGR_DIAG token for afe diagnostic -+//* Added AFEDEV token for afe device driver -+//* Added DSPBIOSII token for dsp bios -+//* 09/21/01 Sameer Enable EXTERNBERT. Disable ATMBERT. -+//* 10/01/01 U.Dasgupta Turned off SMART_MARGIN for ap0500mb because of FECs/CRCs; -+//* 10/09/01 Barnett Added support for ar0500db. -+//* 10/12/01 Barnett Disable EXTERNBERT. -+//* 10/15/01 Barnett Turn off SMART_MARGIN. -+//* 11/07/01 Barnett Def'ed ISDN_DEBUG for all targets to avoid compiler warnings. -+//* Assumed defaul value is zero. -+//* 11/13/01 Barnett Reworked ar0500db_debug to build JTAG-bootable load. -+//* The equivalent production target should only be flash-bootable. -+//* 01/11/02 Yim Added TOKEN JTAG to build JTAG load ar0500db_diag. -+//* 01/23/02 U Iyer Added DEBUG_LOG token. Default value 0 -+//* 01/31/02 Barnett Added support for ar0700mp target. -+//* 02/04/02 S.Yim Added TOKEN JTAG to build JTAG load ar0500mp_diag -+//* 02/11/02 U Iyer Added MARGIN_DELTA_RETRAIN token. Default value 1 -+//* 05/15/02 Sameer V Enabled EXTERNBERT token for AR5 and AU5 platforms. EXTERNBERT is -+//* not supported on AR5H. -+//* 02/14/02 Barnett Don't ref the SWTC feature token if mfgr'ing diag target. -+//* 02/19/02 Yim Added support to build au0502db_diag target. -+//* 03/08/02 Nirmal Warke Added feature token HYBRID_SWITCH -+//* 03/15/02 U G Jani Turned ON Bitswap support for AU5I (au0502db) targets. -+//* 04/08/02 U G Jani Enabled NLNOISEADJSNR token for AU5I targets. -+//* 06/24/02 Seungmok Oh Added PERTONE_EQ token support for those targets: -+//* (ar0500mp_debug, au0502mp_debug, ar0500mp, au0502mp) -+//* 06/26/02 Mallesh Added DS_PWR_CUTBACK token. Default value 1. -+//* 06/27/02 Mallesh Changed default value of DS_PWR_CUTBACK token to 0. -+//* 06/29/02 U.Dasgupta Token cleanup: Removed ISDN_DEBUG token -+//* 04/29/02 Mannering Remove EIGHTBITSRAM, Combined DOUBLEBUFFER with -+//* BITSWAP, added FPGA token -+//* 05/03/02 Mannering cleanup token changed by the new routine names -+//* 05/06/02 Mannering Add tokens OUTBAND and INBAND for codec commands -+//* If both OUTBAND and INBAND are 0 codec register are -+//* memory mapped. -+//* 05/29/2002 S.Yim Removed AD1X, AFEDEV -+//* 08/31/2002 Paul Hunt Added PERTONE_EQ and HYBRID_SWITCH for ar0700mp -+//* 09/12/2002 Paul Hunt Added support for ar0700db target. -+//* 08/07/2002 U.Dasgupta Turned off MARGIN_DELTA_RETRAIN feature for ISDN platforms -+//* 11/14/2002 Paul Hunt Merged AX5 MR6 PC modifications into AR7 codebase, specifically -+//* turned off MARGIN_DELTA_RETRAIN feature for ar0700db target -+//* 08/26/2002 N. Warke Added DUAL_TEQ token. Active only for Ax7 target -+//* 09/26/2002 Mannering Add token CODEC_EMU for codec emulator board -+//* 10/15/2002 Iyer/Molla Added DMT_BIS token for DELT support -+//* 10/21/2002 A. Redfern Added PHY_EC_ENABLE and PHY_PATH_ENABLE tokens -+//* 10/23/2002 A. Redfern Removed LINE_DIAG token -+//* 10/28/2002 J. Bergsagel Cleaned up old targets and cleaned up the token list -+//* 10/30/2002 A. Redfern Added PHY_TDW_ENABLE -+//* 11/01/2002 A. Redfern Removed SMART_MARGIN token -+//* 11/01/2002 Mustafa Turned on SPECTRAL_SHAPING features for Lucent AnyMedia O.69 Interop. -+//* 11/15/2002 Yim/Mannering Added CODEC_EMU token for analog emulation board specifics -+//* 11/15/2002 Iyer/Molla Added DEBUG_DELT and MEM_STR token to support DELT debug -+//* 12/27/2002 Sameer V Added ATM_TC_HW token for Sangam. -+//* 01/06/2003 J. Bergsagel Added default values for NLNOISEADJSNR, ARTT and DS_PWR_CUTBACK -+//* 01/07/2003 S.Yim Modified ar0700db_diag target to turn on ISDN token -+//* 01/22/2003 J. Bergsagel Added back in defines for the debug targets. -+//* 01/21/2003 MCB Implemented Ax7 UNIT-MODULE modular software framework. -+//* 01/31/2003 J. Bergsagel Made debug targets to be for the FPGA platform; non-debug for Sangam. -+//* Turned off DUAL_TEQ, PHY_EC_ENABLE and PHY_PATH_ENABLE by default -+//* for the Sangam (non-debug) targets. -+//* Turned off OLAYDP token by default. -+//* Turned off SWTC and turned on ATM_TC_HW by default for Sangam targets. -+//* 01/29/2003 Sameer V Added ATMBERT_HW token for Sangam. -+//* 02/04/2003 D. Mannering Added CO_PROFILE token -+//* 02/19/2003 Sameer V Added back EXTERNBERT token for ar0700mp_dp and ar0700db_dp targets. -+//* Disabled EXTERNBERT for debug target since it is not supported on the -+//* FPGA platform. -+//* 02/21/2003 A. Redfern Turned off OAM_EOC, AOC and BITSWAP (until memory issues are resolved). -+//* Turned on DUAL_TEQ, PHY_PATH_ENABLE and PHY_EC_ENABLE. -+//* 02/21/2003 D. Mannering Added DEBUG_DUMP. -+//* 03/06/2003 J. Bergsagel Cleaned up tokens for each target and switched diag targets -+//* over to the Sangam platform (instead of the FPGA platform). -+//* 03/07/2003 J. Bergsagel Cleaned up TC and BERT tokens -+//* 03/11/2003 J. Bergsagel Turned on AOC and BITSWAP for Sangam POTS and ISDN targets. -+//* 03/20/2003 Mallesh Added SHALF token. -+//* 03/24/2003 F. Mujica Enable hybrid selection -+//* 03/26/2003 A. Redfern Removed PMEMSAVE_GHS (always = 1). -+//* 04/08/2003 F. Mujica Renamed HYBRID_SWITCH token to PHY_HYB_ENABLE -+//* 04/08/2003 J. Bergsagel Turned off PHY_HYB_ENABLE for _debug targets (FPGA board builds) -+//* 04/09/2003 J. Bergsagel Turned on OLAYDP only for ar0700mp and ar0700db. -+//* Turned on AOC, BITSWAP, and OAM_EOC for ar0700mp and ar0700db. -+//* 04/09/2003 J. Bergsagel Corrected name "PHY_HYB_SELECT" to "PHY_HYB_ENABLE" -+//* 04/15/2003 A. Redfern Turned on ECI_PULSECOM_INTEROP because phase optimization was enabled. -+//* 05/05/2003 D. Mannering Review Comments - turn on AOC, EXTERNBERT, SHALF, for ar0700mp; amd -+//* turn on AOC for ar0700db -+//* 05/11/2003 Prashant S Added DMT_BIS token for AR7 Soft DI work -+//* 05/13/2003 J. Bergsagel Turned on IMPROVED_STAT_SUPPORT_06_03_00 by default for necessary statistics -+//* 05/15/2003 J. Bergsagel Turned off CO_PROFILE for diag targets. -+//* 05/27/2003 U.Dasgupta Added NLNOISEADJSNR_EC token for ISDN - to take care of non-linear noise -+//* (from ISDN splitter) compensation. -+//* 06/02/2003 Z. Yang Added PHY_NDIAG_ENABLE token. -+//* 06/02/2003 Z. Yang Added COMB_LINEDIAG_ENABLE token. -+//* 06/05/2003 P. Hunt Turned on ATUC_CLEARDOWN_CHANGE token for all targets. -+//* 06/05/2003 Mallesh Turned on CENTILLIUM_VENDORID_AND_TXRATE_CHNG to enable logging the vendor ID -+//* for centillium and litespan -+//* 06/05/2003 U.Dasgupta Turned on SHALF token for ISDN. -+//* 06/06/2003 U.Dasgupta Turned on G.hs nonstandard field token for ar0700db target. -+//* 06/12/2003 J. Bergsagel Changed *_debug targets to be for JTAG=1 instead of FPGA targets -+//* IMPORTANT: For non-JTAG cases, "JTAG" should be undefined. -+//* Therefore, "JTAG" should not have a default case at the bottom (JTAG 0) -+//* 06/18/2003 A. Redfern Turned on spectral shaping token for all targets. -+//* 06/23/2003 J. Bergsagel Turned off GHS_NON_STD_FIELD token for ar0700db until bugs are fixed. -+//* 06/23/2003 U G Jani Undid the above change since the bug is fixed. -+//* 06/27/2003 Mallesh Removed all the interop tokens which are no longer required. -+//* 08/20/2003 J. Bergsagel Added default value for OVHD_PMDTEST_PARA and put default section -+//* tokens in alphabetical order. -+//* 10/09/2003 Hanyu Liu Defined token ADSL2_1BIT_TONE to support Rx one bit constellation. -+//* 10/12/2003 Hanyu Liu Defined token ADSL2_BSWP for bitswap. -+//* 10/20/2003 Xiaohui Li Added READSL2_ENABLE token. -+//* 12/01/2003 Seungmok Oh Added TXDF2B_PROFILING token, which is active only for POTS target. -+//* 12/09/2003 Jack Huang Turned on GHS_NON_STD_FIELD support for AR7 POTS targets -+//* 12/16/2003 Mustafa T. Added the necessary definitions for diag target. -+//***************************************************************************************************** -+//* -+//* The default flag settings are: -+//* -+//* -dATUC=1 -dSTD=0 -dISDN=0 -dTIPCI=0 -dTID=0 -dTII=0 -dAI=0 -+//* -dEVM2=0 -dEU=0 -dSL=0 -dSL_EVM=1 -dGLITE=0 -+//* -+//* and are set after all the per-suffix options have had a chance to -+//* set them. Each flag is only set if it has not previously been set, so -+//* per-suffix settings can override defaults, and command-line defines can -+//* override per-suffix settings. -+//* -+//***************************************************************************** -+ -+ -+//* =========================================================================== -+//* Suffix codes -+//* The command-line can include -dOBJSFX_xxx to get a flag set -+//* instead of explicitly setting each flag on each CC/ASM command-line. -+//* and the object suffix will control the settings of "feature" constants. -+//* =========================================================================== -+// -+//* =========================================================================== -+// Flag settings for new suffixes (in alphabetical order of suffix) -+// Each suffix has to specify only those flags which differ from the -+// default settings. -+//* =========================================================================== -+// NOTE: Try to keep feature flags in alphabetical order to ease maintenance. -+//* =========================================================================== -+//* -+ -+#define CHIPSET_ID_UNKN '?' -+#define CHIPSET_ID_AH 'H' -+#define CHIPSET_ID_AP 'P' -+#define CHIPSET_ID_AR 'R' -+#define CHIPSET_ID_ARV 'R' -+#define CHIPSET_ID_AT 'T' -+#define CHIPSET_ID_AU 'U' -+ -+#define CHIPSET_ID2_GENERIC '0' -+#define CHIPSET_ID2_ARV 'R' -+ -+ #define DSPDP_IMAGE_ID_STANDARD(code) ( \ -+ STANDARD_is_MULTIMODE(code) ? "M" : \ -+ STANDARD_is_GDMT(code) ? "D" : \ -+ STANDARD_is_GLITE(code) ? "L" : \ -+ STANDARD_is_T1413(code) ? "T" : "_") -+ -+ #define DSPDP_IMAGE_ID_SERVICE(code) ( \ -+ SERVICE_is_POTS(code) ? "P" : \ -+ SERVICE_is_ISDN_ANNEXB(code) ? "B" : \ -+ SERVICE_is_ISDN_ANNEXC(code) ? "C" : \ -+ SERVICE_is_ISDN_PROP(code) ? "I" : "") -+ -+// Bit-codes for feature byte in new version. -+// -+// 0000 0000 -+// |||| |||| -+// |||| |||+ -- POTS -+// |||| ||+---- ISDN_ANNEXB -+// |||| |+----- ISDN_ANNEXC -+// |||| +------ ISDN_PROP -+// |||+-------- -+// ||+--------- GHS -+// |+---------- GLITE -+// +----------- T1413 -+// -+// -+#define FEATURE_BIT_T1413 0x80 -+#define FEATURE_BIT_GLITE 0x40 -+#define FEATURE_BIT_GHS 0x20 -+#define FEATURE_BIT_ISDN_PROP 0x08 -+#define FEATURE_BIT_ISDN_ANNEXC 0x04 -+#define FEATURE_BIT_ISDN_ANNEXB 0x02 -+#define FEATURE_BIT_POTS 0x01 -+ -+#define STANDARD_BITS_MASK (FEATURE_BIT_T1413 | FEATURE_BIT_GLITE | FEATURE_BIT_GHS) -+#define STANDARD_BITS_T1413 FEATURE_BIT_T1413 -+#define STANDARD_BITS_GHS FEATURE_BIT_GHS -+#define STANDARD_BITS_GLITE (FEATURE_BIT_GLITE | FEATURE_BIT_GHS) -+#define STANDARD_BITS_GDMT (STANDARD_BITS_T1413 | STANDARD_BITS_GHS) -+#define STANDARD_BITS_MULTIMODE (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT) -+ -+#define SERVICE_BIT_ISDN_ANNEXB FEATURE_BIT_ISDN_ANNEXB -+#define SERVICE_BIT_ISDN_ANNEXC FEATURE_BIT_ISDN_ANNEXC -+#define SERVICE_BIT_ISDN_PROP FEATURE_BIT_ISDN_PROP -+#define SERVICE_BIT_POTS FEATURE_BIT_POTS -+ -+// -+// Debug new-style suffixes -+// -+// -+ -+#if defined(OBJSFX_ar0700db_debugobj) -+#ifndef OBJSFX_ar0700dbobj -+#define OBJSFX_ar0700dbobj 1 -+#endif -+// Here, in alphabetic order, are the feature tokens that -+// distinguish this suffix from its non-_debug partner: -+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up) -+ -+#ifndef JTAG -+#define JTAG 1 -+#endif -+ -+#elif defined(OBJSFX_ar0700mp_debugobj) -+#ifndef OBJSFX_ar0700mpobj -+#define OBJSFX_ar0700mpobj 1 -+#endif -+// Here, in alphabetic order, are the feature tokens that -+// distinguish this suffix from its non-_debug partner: -+// (All other tokens from the non-_debug partner that are non-conflicting will also be picked up) -+ -+#ifndef ADSL2_BSWP -+#define ADSL2_BSWP 1 -+#endif -+#ifndef AOC -+#define AOC 1 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 1 -+#endif -+#ifndef DEBUG_ADSL2 -+#define DEBUG_ADSL2 0 -+#endif -+#ifndef DEBUG_LOG -+#define DEBUG_LOG 0 -+#endif -+#ifndef GHS_NON_STD_FIELD -+#define GHS_NON_STD_FIELD 1 -+#endif -+#ifndef JTAG -+#define JTAG 1 -+#endif -+#endif // end of the series of "#elif defined" for debug targets -+ -+ -+// -+// Standard new-style suffixes for operational and mfgr'ing diag. -+// -+ -+#if defined(OBJSFX_ar0700dbobj) -+#define CHIPSET_AR07 1 -+#define PLATFORM_AR0700 1 -+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR -+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC -+#define DSPDP_CHIPSET_GEN 7 -+#define DSPDP_HARDWARE_REV1 '0' -+#define DSPDP_HARDWARE_REV2 '0' -+#define DSPDP_FEATURE_CODE (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB) -+#ifndef AOC -+#define AOC 1 -+#endif -+// ATM_TC_HW and SWTC are mutually exclusive -+#ifndef ATM_TC_HW -+#define ATM_TC_HW 1 -+#endif -+#ifndef SWTC -+#define SWTC 0 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 1 -+#endif -+#ifndef EXTERNBERT -+#define EXTERNBERT 0 -+#endif -+#ifndef GHS_NON_STD_FIELD -+#define GHS_NON_STD_FIELD 1 -+#endif -+#ifndef MARGIN_DELTA_RETRAIN -+#define MARGIN_DELTA_RETRAIN 0 -+#endif -+#ifndef NLNOISEADJSNR_EC -+#define NLNOISEADJSNR_EC 1 -+#endif -+#ifndef OLAYDP -+#define OLAYDP 1 -+#endif -+#ifndef SHALF -+#define SHALF 1 -+#endif -+ -+ -+#elif defined(OBJSFX_ar0700db_diagobj) -+#define CHIPSET_AR07 1 -+#define PLATFORM_AR0700 1 -+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR -+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC -+#define DSPDP_CHIPSET_GEN 7 -+#define DSPDP_HARDWARE_REV1 '0' -+#define DSPDP_HARDWARE_REV2 '0' -+#define DSPDP_FEATURE_CODE (STANDARD_BITS_GDMT|SERVICE_BIT_ISDN_ANNEXB) -+#ifndef AOC -+#define AOC 0 -+#endif -+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off) -+#ifndef ATM_TC_HW -+#define ATM_TC_HW 0 -+#endif -+#ifndef SWTC -+#define SWTC 0 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 0 -+#endif -+#ifndef CO_PROFILE -+#define CO_PROFILE 0 -+#endif -+#ifndef MARGIN_DELTA_RETRAIN -+#define MARGIN_DELTA_RETRAIN 0 -+#endif -+#ifndef MFGR_DIAG -+#define MFGR_DIAG 1 -+#endif -+#ifndef OAM_EOC -+#define OAM_EOC 0 -+#endif -+#ifndef OLAYDP -+#define OLAYDP 0 -+#endif -+#ifndef SNR_UPDATE -+#define SNR_UPDATE 0 -+#endif -+ -+#elif defined(OBJSFX_ar0700mpobj) -+#define CHIPSET_AR07 1 -+#define PLATFORM_AR0700 1 -+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR -+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC -+#define DSPDP_CHIPSET_GEN 7 -+#define DSPDP_HARDWARE_REV1 '0' -+#define DSPDP_HARDWARE_REV2 '0' -+#define DSPDP_FEATURE_CODE (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS) -+#ifndef AOC -+#define AOC 1 -+#endif -+// ATM_TC_HW and SWTC are mutually exclusive -+#ifndef ADSL2_1BIT_TONE -+#define ADSL2_1BIT_TONE 0 -+#endif -+#ifndef ADSL2_BSWP -+#define ADSL2_BSWP 1 -+#endif -+#ifndef ATM_TC_HW -+#define ATM_TC_HW 1 -+#endif -+#ifndef SWTC -+#define SWTC 0 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 1 -+#endif -+#ifndef EXTERNBERT -+#define EXTERNBERT 0 -+#endif -+#ifndef OLAYDP -+#define OLAYDP 1 -+#endif -+#ifndef DMT_BIS -+#define DMT_BIS 1 -+#endif -+#ifndef SHALF -+#define SHALF 1 -+#endif -+#ifndef MEM_STR -+#define MEM_STR 0 -+#endif -+#ifndef DS_LOOP_BACK -+#define DS_LOOP_BACK 0 -+#endif -+#ifndef LOOP_BACK_DEBUG -+#define LOOP_BACK_DEBUG 0 -+#endif -+#ifndef US_LOOP_BACK -+#define US_LOOP_BACK 0 -+#endif -+#ifndef OVHD_PMDTEST_PARA -+#define OVHD_PMDTEST_PARA 0 -+#endif -+#ifndef DS_RX_CODEWORD -+#define DS_RX_CODEWORD 1 -+#endif -+#ifndef READSL2_ENABLE -+#define READSL2_ENABLE 1 -+#endif -+#ifndef GHS_NON_STD_FIELD -+#define GHS_NON_STD_FIELD 1 -+#endif -+ -+#elif defined(OBJSFX_ar0700mp_diagobj) -+#define CHIPSET_AR07 1 -+#define PLATFORM_AR0700 1 -+#define DSPDP_CHIPSET_ID CHIPSET_ID_AR -+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC -+#define DSPDP_CHIPSET_GEN 7 -+#define DSPDP_HARDWARE_REV1 '0' -+#define DSPDP_HARDWARE_REV2 '0' -+#define DSPDP_FEATURE_CODE (STANDARD_BITS_MULTIMODE|SERVICE_BIT_POTS) -+#ifndef ADSL2_BSWP -+#define ADSL2_BSWP 0 -+#endif -+#ifndef AOC -+#define AOC 0 -+#endif -+// ATM_TC_HW and SWTC are mutually exclusive (or both must be off) -+#ifndef ATM_TC_HW -+#define ATM_TC_HW 0 -+#endif -+#ifndef SWTC -+#define SWTC 0 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 0 -+#endif -+#ifndef CO_PROFILE -+#define CO_PROFILE 0 -+#endif -+#ifndef DMT_BIS -+#define DMT_BIS 0 -+#endif -+#ifndef MARGIN_DELTA_RETRAIN -+#define MARGIN_DELTA_RETRAIN 0 -+#endif -+#ifndef MFGR_DIAG -+#define MFGR_DIAG 1 -+#endif -+#ifndef OAM_EOC -+#define OAM_EOC 0 -+#endif -+#ifndef OLAYDP -+#define OLAYDP 0 -+#endif -+#ifndef SNR_UPDATE -+#define SNR_UPDATE 0 -+#endif -+#ifndef US_CRC_RETRAIN -+#define US_CRC_RETRAIN 0 -+#endif -+#ifndef ADSL2_BSWP -+#define ADSL2_BSWP 0 -+#endif -+#ifndef DMT_BIS -+#define DMT_BIS 0 -+#endif -+#ifndef DS_RX_CODEWORD -+#define DS_RX_CODEWORD 0 -+#endif -+ -+#else -+#define DSPDP_CHIPSET_ID CHIPSET_ID_UNKN -+#define DSPDP_CHIPSET_ID2 CHIPSET_ID2_GENERIC -+#define DSPDP_CHIPSET_GEN 0 -+#define DSPDP_HARDWARE_REV1 '0' -+#define DSPDP_HARDWARE_REV2 '0' -+#define DSPDP_FEATURE_CODE 0 -+#endif -+ -+// For use in checking the code in drivers -- indented to avoid .h->.ah -+ #define STANDARD_is_T1413(code) (!(((code) & STANDARD_BITS_MASK) ^ STANDARD_BITS_T1413)) -+ #define STANDARD_is_GLITE(code) (!(((code) & STANDARD_BITS_MASK) ^ STANDARD_BITS_GLITE)) -+ #define STANDARD_is_GHS(code) (((code) & STANDARD_BITS_MASK) & STANDARD_BITS_GHS) -+ #define STANDARD_is_GDMT(code) (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS))) -+ #define STANDARD_is_MULTIMODE(code) (!(((code) & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT))) -+ #define SERVICE_is_POTS(code) ((code) & SERVICE_BIT_POTS) -+ #define SERVICE_is_ISDN_ANNEXB(code) ((code) & SERVICE_BIT_ISDN_ANNEXB) -+ #define SERVICE_is_ISDN_ANNEXC(code) ((code) & SERVICE_BIT_ISDN_ANNEXC) -+ #define SERVICE_is_ISDN_PROP(code) ((code) & SERVICE_BIT_ISDN_PROP) -+ -+#define STANDARD_T1413 (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ STANDARD_BITS_T1413)) -+#define STANDARD_GLITE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ STANDARD_BITS_GLITE)) -+#define STANDARD_GHS ((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) & STANDARD_BITS_GHS) -+#define STANDARD_GDMT (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GHS))) -+#define STANDARD_MULTIMODE (!((DSPDP_FEATURE_CODE & STANDARD_BITS_MASK) ^ (STANDARD_BITS_T1413 | STANDARD_BITS_GLITE | STANDARD_BITS_GDMT))) -+ -+#define SERVICE_POTS (DSPDP_FEATURE_CODE & SERVICE_BIT_POTS) -+#define SERVICE_ISDN_ANNEXB (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXB) -+#define SERVICE_ISDN_ANNEXC (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_ANNEXC) -+#define SERVICE_ISDN_PROP (DSPDP_FEATURE_CODE & SERVICE_BIT_ISDN_PROP) -+#define SERVICE_ISDN (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_ANNEXC | SERVICE_ISDN_PROP) -+ -+ -+// -+// Backwards compatibility with old tokens -+// -+ -+#if (SERVICE_POTS) -+#ifndef ISDN -+#define ISDN 0 -+#endif -+#endif -+ -+#if (SERVICE_ISDN_ANNEXB | SERVICE_ISDN_PROP) -+#ifndef ISDN -+#define ISDN 1 -+#endif -+#endif -+ -+ -+// -+//* =========================================================================== -+// More Default settings -+//* =========================================================================== -+// -+ -+// -+// BEGIN Could automatically generate showdefs code -+// -+#ifndef AOC -+#define AOC 1 -+#endif -+#ifndef ARTT -+#define ARTT 0 -+#endif -+#ifndef ATMBERT -+#define ATMBERT 0 -+#endif -+// ATM_TC_HW and SWTC are mutually exclusive -+#ifndef ATM_TC_HW -+#define ATM_TC_HW 1 -+#endif -+#if ATM_TC_HW -+#ifndef ATMBERT_HW -+#define ATMBERT_HW 1 -+#endif -+#ifndef SWTC -+#define SWTC 0 -+#endif -+#else // else case for #if ATM_TC_HW -+#ifndef ATMBERT_HW -+#define ATMBERT_HW 0 -+#endif -+#ifndef SWTC -+#define SWTC 1 -+#endif -+#endif // end of #if ATM_TC_HW -+#ifndef ATM_TC_PATH1_ON -+#define ATM_TC_PATH1_ON 0 -+#endif -+#ifndef BITSWAP -+#define BITSWAP 1 -+#endif -+#ifndef COMB_LINEDIAG_ENABLE -+#define COMB_LINEDIAG_ENABLE 0 -+#endif -+#ifndef CODEC_EMU -+#define CODEC_EMU 0 -+#endif -+#ifndef CO_PROFILE -+#define CO_PROFILE 1 -+#endif -+#ifndef DDC -+#define DDC 0 -+#endif -+#ifndef DEBUG_ADSL2 -+#define DEBUG_ADSL2 0 -+#endif -+#ifndef DEBUG_DUMP -+#define DEBUG_DUMP 0 -+#endif -+#ifndef DEBUG_LOG -+#define DEBUG_LOG 0 -+#endif -+#ifndef DEV_DEBUG -+#define DEV_DEBUG 0 -+#endif -+#ifndef DS_LOOP_BACK -+#define DS_LOOP_BACK 0 -+#endif -+#ifndef DS_RX_CODEWORD -+#define DS_RX_CODEWORD 1 -+#endif -+#ifndef LOOP_BACK_DEBUG -+#define LOOP_BACK_DEBUG 0 -+#endif -+#ifndef US_LOOP_BACK -+#define US_LOOP_BACK 0 -+#endif -+#ifndef DPLL_MODE -+#define DPLL_MODE 0 -+#endif -+#ifndef DSPBIOSII -+#define DSPBIOSII 0 -+#endif -+#ifndef DMT_BIS -+#define DMT_BIS 1 -+#endif -+#ifndef ADSL2_1BIT_TONE -+#define ADSL2_1BIT_TONE 0 -+#endif -+#ifndef ADSL2_BSWP -+#define ADSL2_BSWP 1 -+#endif -+#ifndef MEM_STR -+#define MEM_STR 0 -+#endif -+#ifndef DS_PWR_CUTBACK -+#define DS_PWR_CUTBACK 0 -+#endif -+#ifndef DUAL_TEQ -+#define DUAL_TEQ 1 -+#endif -+#ifndef EXTERNBERT -+#define EXTERNBERT 0 -+#endif -+#ifndef FPGA -+#define FPGA 0 -+#endif -+#ifndef INBAND -+#define INBAND 0 -+#endif -+#ifndef ISDN -+#define ISDN 0 -+#endif -+#ifndef ISDN_DEBUG -+#define ISDN_DEBUG 0 -+#endif -+#ifndef LINE_DIAG -+#define LINE_DIAG 1 -+#endif -+#ifndef LOOP_BACK_DEBUG -+#define LOOP_BACK_DEBUG 0 -+#endif -+#ifndef MANUFACTURING_TESTS -+#define MANUFACTURING_TESTS 0 -+#endif -+#ifndef MARGIN_DELTA_RETRAIN -+#define MARGIN_DELTA_RETRAIN 1 -+#endif -+#ifndef MEM_STR -+#define MEM_STR 0 -+#endif -+#ifndef MFGR_DIAG -+#define MFGR_DIAG 0 -+#endif -+#ifndef NLNOISEADJSNR -+#define NLNOISEADJSNR 0 -+#endif -+#ifndef NLNOISEADJSNR_EC -+#define NLNOISEADJSNR_EC 0 -+#endif -+#ifndef NTR_MODE -+#define NTR_MODE 0 -+#endif -+#ifndef OAM_EOC -+#define OAM_EOC 1 -+#endif -+#ifndef OLAYDP -+#define OLAYDP 0 -+#endif -+#ifndef OLAYDP_EMIF -+#define OLAYDP_EMIF 0 -+#endif -+#ifndef OLAYDP_2STEP -+#define OLAYDP_2STEP 0 -+#endif -+#ifndef OLAYDP_PCI -+#define OLAYDP_PCI 0 -+#endif -+#ifndef OUTBAND -+#define OUTBAND 0 -+#endif -+#ifndef OVHD_PMDTEST_PARA -+#define OVHD_PMDTEST_PARA 0 -+#endif -+#ifndef PERTONE_EQ -+#define PERTONE_EQ 0 -+#endif -+#ifndef PHY_EC_ENABLE -+#define PHY_EC_ENABLE 1 -+#endif -+#ifndef PHY_HYB_ENABLE -+#define PHY_HYB_ENABLE 1 -+#endif -+#ifndef PHY_NDIAG_ENABLE -+#define PHY_NDIAG_ENABLE 0 -+#endif -+#ifndef PHY_PATH_ENABLE -+#define PHY_PATH_ENABLE 1 -+#endif -+#ifndef PHY_TDW_ENABLE -+#define PHY_TDW_ENABLE 0 -+#endif -+#ifndef TC_ATM_PCIMASTER -+#define TC_ATM_PCIMASTER 0 -+#endif -+#ifndef SEPARATE_TX_RX_BUFFERS -+#define SEPARATE_TX_RX_BUFFERS 0 -+#endif -+#ifndef SHALF -+#define SHALF 0 -+#endif -+#ifndef SPECTRAL_SHAPING -+#define SPECTRAL_SHAPING 1 -+#endif -+#ifndef SNR_UPDATE -+#define SNR_UPDATE 1 -+#endif -+#ifndef TC_DEBUG -+#define TC_DEBUG 0 -+#endif -+#ifndef TC_LOOPBACK -+#define TC_LOOPBACK 0 -+#endif -+#ifndef TESTMODE -+#define TESTMODE 0 -+#endif -+#ifndef TRELLIS -+#define TRELLIS 1 -+#endif -+#ifndef TXDF2B_PROFILING -+#if (SERVICE_POTS & (!MFGR_DIAG) & (CO_PROFILE)) -+#define TXDF2B_PROFILING 1 -+#else -+#define TXDF2B_PROFILING 0 -+#endif -+#endif -+#ifndef US_CRC_RETRAIN -+#define US_CRC_RETRAIN 1 -+#endif -+#ifndef US_LOOP_BACK -+#define US_LOOP_BACK 0 -+#endif -+#ifndef USB -+#define USB 0 -+#endif -+#ifndef READSL2_ENABLE -+#define READSL2_ENABLE 1 -+#endif -+ -+// Interop tokens -+#ifndef GHS_NON_STD_FIELD -+#define GHS_NON_STD_FIELD 0 -+#endif -+#ifndef LUCENT_ANYMEDIA_ENIATT_INTEROP -+#define LUCENT_ANYMEDIA_ENIATT_INTEROP 0 -+#endif -+ -+ -+// -+// END Could automatically generate showdefs code -+// -+#if DSPDP_FEATURE_CODE -+#else -+// Unrecognized_suffix____check_spelling -+#endif -+// -+// LNK_CMD is set when running CPP to generate lnk_cpe.cmd file -+// -- the linker is not happy when it sees C code show up in the -+// result! -+// -+#ifndef LNK_CMD -+extern int compile_happy; // Keep the compiler from complaining about an empty file -+#endif -+ -+#endif -+ -diff -urN linux.old/drivers/atm/sangam_atm/env_def_typedefs.h linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h ---- linux.old/drivers/atm/sangam_atm/env_def_typedefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/env_def_typedefs.h 2005-08-23 04:46:50.104842632 +0200 -@@ -0,0 +1,228 @@ -+#ifndef __ENV_DEF_TYPEDEFS_H__ -+#define __ENV_DEF_TYPEDEFS_H__ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: Define data types for C and TMS320C6x C compilers -+******************************************************************************** -+* -+* FILE NAME: dpsys_typedefs.h -+* -+* DESCRIPTION: -+* This file contains the main typedefs that we need. -+* -+* HISTORY: -+* -+* 03/11/97 Bob Lee Created -+* 03/13/97 Chishtie -+* 03/14/97 Bob Lee Format change to meet "Engineering Model -+* - System Architucture Specification" -+* Rev AP3. Jan. 29, 1997 -+* 07/21/00 Barnett Moved many common typedefs from -+* host i/f header file to here. -+* 03/30/01 Barnett Mod's per driver team feedback. -+* Some tokens cannot be def'ed -+* if _WINDEF_ is def'ed. -+* 04/05/01 Barnett Added DSPDP_ prefix to tokens that originate -+* in the public interface. -+* 06/01/01 J. Bergsagel Modified to add standard typedefs -+* 07/25/01 J. Bergsagel Changed name from typedefs.h to dpsys_typedefs.h -+* 07/30/01 J. Bergsagel Moved typedefs that were conflicting with Windows -+* driver software to the "#ifndef _WINDEF_" section. -+* 08/09/01 S. Yim Moved FALSE/TRUE definitions from ctl_interface_u.h -+* (conflict with BIOS/std.h) -+* 09/03/01 S. Yim Do not include typedef char and float if _STD defined -+* (conflict with BIOS/std.h) -+* 01/21/03 MCB Implemented Ax7 UNIT-MODULE modular software framework. -+* 03/20/03 Mallesh Defined size of basic variables -+* 03/27/03 F. Mujica Added SINT40 and UINT40 definitions. -+* -+* (C) Copyright Texas Instruments Inc. 1997-2001. All rights reserved. -+*******************************************************************************/ -+ -+// Common type definitions -+ -+// Basic constants needed everywhere -+#ifndef STD_ -+#define FALSE 0 -+#define TRUE 1 -+#endif -+ -+// Read-Write Data Types -+typedef signed char SINT8; // Signed 8-bit integer (7-bit magnitude) -+typedef unsigned char UINT8; // Unsigned 8-bit integer -+typedef signed short SINT16; // Signed 16-bit integer (15-bit magnitude) -+typedef unsigned short UINT16; // Unsigned 16-bit integer -+typedef signed int SINT32; // Signed 32-bit integer (31-bit magnitude) -+typedef unsigned int UINT32; // Unsigned 32-bit integer -+typedef long signed int SINT40; // Long signed 40-bit integer -+typedef long unsigned int UINT40; // Long unsigned 40-bit integer -+ -+// All pointers are 32 bits long -+typedef SINT8 *PSINT8; // Pointer to SINT8 -+typedef UINT8 *PUINT8; // Pointer to UINT8 -+typedef SINT16 *PSINT16; // Pointer to SINT16 -+typedef UINT16 *PUINT16; // Pointer to UINT16 -+typedef SINT32 *PSINT32; // Pointer to SINT32 -+typedef UINT32 *PUINT32; // Pointer to UINT32 -+ -+#define SIZEOF_SINT8 1 -+#define SIZEOF_UINT8 1 -+#define SIZEOF_SINT16 2 -+#define SIZEOF_UINT16 2 -+#define SIZEOF_SINT32 4 -+#define SIZEOF_UINT32 4 -+#define SIZEOF_SINT40 8 -+#define SIZEOF_UINT40 8 -+ -+// Size of Read-Write Data Types - in bytes -+#define SIZEOF_char 1 -+#define SIZEOF_Int8 1 -+#define SIZEOF_UChar 1 -+#define SIZEOF_UInt8 1 -+#define SIZEOF_Float 4 -+#define SIZEOF_Double 8 -+#define SIZEOF_byte 1 -+ -+// Read-Only Data Types - should be only used for ROM code -+typedef const char CharRom; // 8 bit signed character -+typedef const signed char Int8Rom; // 8 bit signed integer -+typedef const unsigned char UCharRom; // 8 bit unsigned character -+typedef const unsigned char UInt8Rom; // 8 bit unsigned integer -+typedef const float FloatRom; // IEEE 32-bit -+typedef const double DoubleRom; // IEEE 64-bit -+ -+#ifndef _WINDEF_ -+ -+// Read-Write Data Types -+typedef signed char Int8; // 8 bit signed integer -+typedef unsigned char UChar; // 8 bit unsigned character -+typedef unsigned char UInt8; // 8 bit unsigned integer -+#ifndef STD_ -+typedef char Char; // 8 bit signed character -+typedef float Float; // IEEE 32-bit -+#endif -+typedef double Double; // IEEE 64-bit -+typedef signed char byte; // 8 bit signed integer -+ -+ -+// These typedefs collide with those in Win2k DDK inc\WINDEF.H -+ -+// common type definition -+typedef unsigned char BYTE; // 8-bit -+typedef signed short SHORT; // 16-bit signed -+typedef unsigned short WORD; // 16-bit -+typedef unsigned int DWORD; // 32-bit, TI DSP has 40 bit longs -+ -+// All pointers are 32 bits long -+typedef BYTE *PBYTE; // pointer to 8 bit data -+typedef unsigned char *PCHAR; // pointer to 8 bit data -+typedef SHORT *PSHORT; // pointer to 16 bit data -+typedef WORD *PWORD; // pointer to 16 bit data -+typedef DWORD *PDWORD; // pointer to 32 bit data -+ -+#endif // #ifndef _WINDEF_ -+ -+ -+#define SIZEOF_BYTE 1 -+#define SIZEOF_SHORT 2 -+#define SIZEOF_WORD 2 -+#define SIZEOF_DWORD 4 -+#define SIZEOF_PCHAR 4 -+#define SIZEOF_PWORD 4 -+#define SIZEOF_PDWORD 4 -+ -+// Size of Read-Only Data Types - in bytes -+#define SIZEOF_CharRom 1 -+#define SIZEOF_Int8Rom 1 -+#define SIZEOF_UCharRom 1 -+#define SIZEOF_UInt8Rom 1 -+#define SIZEOF_FloatRom 4 -+#define SIZEOF_DoubleRom 8 -+ -+#define SIZEOF_complex_byte (2*SIZEOF_byte) -+#define SIZEOF_PTR_complex_byte 4 -+typedef struct { -+ byte re; -+ byte im; -+} complex_byte, *PTR_complex_byte; -+ -+#define SIZEOF_complex_short 4 -+#define SIZEOF_PTR_complex_short 4 -+typedef struct { -+ short re; -+ short im; -+} complex_short, *PTR_complex_short; -+ -+#define SIZEOF_complex_int 8 -+#define SIZEOF_PTR_complex_int 4 -+typedef struct { -+ int re; -+ int im; -+} complex_int, *PTR_complex_int; -+ -+typedef struct { -+ int high; -+ unsigned int low; -+} int64; -+ -+typedef struct { -+ int64 real; -+ int64 imag; -+} complex_int64; -+ -+#define SIZEOF_PVOID 4 -+typedef void *PVOID; // pointer to void -+ -+//* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -+ -+#if defined(_TMS320C6X) // TMS320C6xx type definitions -+ -+// Read-Write Data Types -+typedef short Int16; // 16 bit signed integer -+typedef unsigned short UInt16; // 16 bit unsigned integer -+typedef int Int32; // 32 bit signed integer -+typedef unsigned int UInt32; // 32 bit unsigned signed integer -+typedef long Long40; // 40 bit signed integer -+typedef unsigned long ULong40; // 40 bit unsigned signed integer -+ -+// Size of Read-Write Data Types - in bytes -+#define SIZEOF_Int16 2 -+#define SIZEOF_UInt16 2 -+#define SIZEOF_Int32 4 -+#define SIZEOF_UInt32 4 -+#define SIZEOF_Long40 5 -+#define SIZEOF_ULong40 5 -+ -+// Read-Only Data Types - should be only used for ROM code -+typedef const short Int16Rom; // 16 bit signed integer -+typedef const unsigned short UInt16Rom; // 16 bit unsigned integer -+typedef const int Int32Rom; // 32 bit signed integer -+typedef const unsigned int UInt32Rom; // 32 bit unsigned signed integer -+typedef const long Long40Rom; // 40 bit signed integer -+typedef const unsigned long ULong40Rom; // 40 bit unsigned signed integer -+ -+// Size of Read-Only Data Types - in bytes -+#define SIZEOF_Int16Rom 2 -+#define SIZEOF_UInt16Rom 2 -+#define SIZEOF_Int32Rom 4 -+#define SIZEOF_UInt32Rom 4 -+#define SIZEOF_Long40Rom 5 -+#define SIZEOF_ULong40Rom 5 -+ -+#else // 32 bits PC Host type definitions -+ -+// Read-Write Data Types -+typedef short Int16; // 16 bit signed integer -+typedef unsigned short UInt16; // 16 bit unsigned integer -+typedef int Int32; // 32 bit signed integer -+typedef unsigned int UInt32; // 32 bit unsigned integer -+ -+// Read-Only Data Types - should be only used for ROM code -+typedef const short Int16Rom; // 16 bit signed integer -+typedef const unsigned short UInt16Rom; // 16 bit unsigned integer -+typedef const int Int32Rom; // 32 bit signed integer -+typedef const unsigned int UInt32Rom; // 32 bit unsigned integer -+ -+#endif -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/Makefile linux.dev/drivers/atm/sangam_atm/Makefile ---- linux.old/drivers/atm/sangam_atm/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/Makefile 2005-08-23 04:46:50.104842632 +0200 -@@ -0,0 +1,35 @@ -+# File: drivers/net/avalanche_cpmac/Makefile -+# -+# Makefile for the Linux network (CPMAC) device drivers. -+# -+ -+ -+O_TARGET := tiatm.o -+obj-$(CONFIG_MIPS_SANGAM_ATM) += tiatm.o -+list-multi := tiatm.o -+ -+tiatm-objs := tn7atm.o tn7dsl.o tn7sar.o dsl_hal_api.o dsl_hal_support.o cpsar.o aal5sar.o -+ -+EXTRA_CFLAGS += -DEL -I$(TOPDIR)/drivers/atm/sangam_atm -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT -+ -+ifeq ($(ANNEX),B) -+EXTRA_CFLAGS += -DANNEX_B -DB -+else -+ifeq ($(ANNEX),C) -+EXTRA_CFLAGS += -DANNEX_C -DC -+else -+EXTRA_CFLAGS += -DANNEX_A -DP -+endif -+endif -+ -+ -+include $(TOPDIR)/Rules.make -+ -+tiatm.o: $(tiatm-objs) -+ $(LD) -r -o $@ $(tiatm-objs) -+ -+#avalanche_cpmac.o: $(avalanche_cpmac-objs) -+# $(LD) -r -o $@ $(avalanche_cpmac-objs) -+ -+clean: -+ rm -f core *.o *.a *.s -diff -urN linux.old/drivers/atm/sangam_atm/queue.h linux.dev/drivers/atm/sangam_atm/queue.h ---- linux.old/drivers/atm/sangam_atm/queue.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/queue.h 2005-08-23 04:46:50.104842632 +0200 -@@ -0,0 +1,167 @@ -+ -+#if !defined( __QUEUE_H__ ) -+#define __QUEUE_H__ -+ -+typedef spinlock_t OS_SPIN_LOCK; -+#define osFreeSpinLock(pLock) while(0) -+void osAcquireSpinLock(OS_SPIN_LOCK *pLock); -+void osReleaseSpinLock(OS_SPIN_LOCK *pLock); -+void osAllocateSpinLock(OS_SPIN_LOCK *pLock); -+ -+//#define osAcquireSpinLock(pLock) spin_lock(pLock) -+//#define osReleaseSpinLock(pLock) spin_unlock(pLock) -+//#define osAllocateSpinLock(pLock) spin_lock_init(pLock) -+ -+ -+typedef struct _TI_LIST_ENTRY { -+ struct _TI_LIST_ENTRY *Flink; -+ struct _TI_LIST_ENTRY *Blink; -+} TI_LIST_ENTRY, *PTI_LIST_ENTRY, TQE, *PTQE; -+ -+typedef struct _TIATM_LIST_ENTRY -+{ -+ TI_LIST_ENTRY Link; -+} TIATM_LIST_ENTRY, *PTIATM_LIST_ENTRY; -+ -+//------------------------------------------------------------------------- -+// QueueInitList -- Macro which will initialize a queue to NULL. -+//------------------------------------------------------------------------- -+#define QueueInitList(_L) (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY)0; -+ -+//------------------------------------------------------------------------- -+// QueueEmpty -- Macro which checks to see if a queue is empty. -+//------------------------------------------------------------------------- -+#define QueueEmpty(_L) (QueueGetHead((_L)) == (PTIATM_LIST_ENTRY)0) -+ -+//------------------------------------------------------------------------- -+// QueueGetHead -- Macro which returns the head of the queue, but does not -+// remove the head from the queue. -+//------------------------------------------------------------------------- -+#define QueueGetHead(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Flink)) -+ -+#define QueueGetNext(Elem) ((PTIATM_LIST_ENTRY)((Elem)->Link.Flink)) -+ -+//------------------------------------------------------------------------- -+// QueuePushHead -- Macro which puts an element at the head of the queue. -+//------------------------------------------------------------------------- -+#define QueuePushHead(_L,_E) \ -+ if (!((_E)->Link.Flink = (_L)->Link.Flink)) \ -+ { \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \ -+ } \ -+(_L)->Link.Flink = (PTI_LIST_ENTRY)(_E); -+ -+//------------------------------------------------------------------------- -+// QueueRemoveHead -- Macro which removes the head of the head of queue. -+//------------------------------------------------------------------------- -+#define QueueRemoveHead(_L) \ -+{ \ -+ PTIATM_LIST_ENTRY ListElem; \ -+ if (ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink) \ -+ { \ -+ if(!((_L)->Link.Flink = ListElem->Link.Flink)) \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \ -+ } \ -+} -+ -+//------------------------------------------------------------------------- -+// QueuePutTail -- Macro which puts an element at the tail (end) of the queue. -+//------------------------------------------------------------------------- -+#define QueuePutTail(_L,_E) \ -+{ \ -+ if ((_L)->Link.Blink) \ -+ { \ -+ ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \ -+ } \ -+ else \ -+ { \ -+ (_L)->Link.Flink = \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \ -+ } \ -+ (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \ -+} -+ -+//------------------------------------------------------------------------- -+// QueuePutTailWithLock -- Macro which puts an element at the tail (end) of -+// the queue, using spin lock. -+//------------------------------------------------------------------------- -+#define QueuePutTailWithLock(_L,_E, pLock) \ -+{ \ -+ osAcquireSpinLock(pLock); \ -+ if ((_L)->Link.Blink) \ -+ { \ -+ ((PTIATM_LIST_ENTRY)(_L)->Link.Blink)->Link.Flink = (PTI_LIST_ENTRY)(_E); \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \ -+ } \ -+ else \ -+ { \ -+ (_L)->Link.Flink = \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY)(_E); \ -+ } \ -+ (_E)->Link.Flink = (PTI_LIST_ENTRY)0; \ -+ osReleaseSpinLock(pLock); \ -+} -+ -+//------------------------------------------------------------------------- -+// QueueGetTail -- Macro which returns the tail of the queue, but does not -+// remove the tail from the queue. -+//------------------------------------------------------------------------- -+#define QueueGetTail(_L) ((PTIATM_LIST_ENTRY)((_L)->Link.Blink)) -+ -+//------------------------------------------------------------------------- -+// QueuePopHead -- Macro which will pop the head off of a queue (list), and -+// return it (this differs only from queueremovehead only in -+// the 1st line) -+//------------------------------------------------------------------------- -+#define QueuePopHead(_L) \ -+(PTIATM_LIST_ENTRY) (_L)->Link.Flink; QueueRemoveHead(_L); -+ -+#define QueueRemoveTail(_L) \ -+{ \ -+ PTIATM_LIST_ENTRY ListElem; \ -+ ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \ -+ if(ListElem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \ -+ { \ -+ (_L)->Link.Flink = (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \ -+ } \ -+ else \ -+ { \ -+ while(ListElem->Link.Flink != (PTI_LIST_ENTRY)(_L)->Link.Blink) \ -+ { \ -+ ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \ -+ } \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY) ListElem; \ -+ ListElem->Link.Flink = (PTI_LIST_ENTRY)0; \ -+ } \ -+} -+ -+#define QueueRemoveItem(_L, Elem) \ -+{ \ -+ PTIATM_LIST_ENTRY ListElem; \ -+ ListElem = (PTIATM_LIST_ENTRY)(_L)->Link.Flink; \ -+ if(ListElem == Elem) \ -+ { \ -+ QueueRemoveHead(_L); \ -+ } \ -+ else \ -+ { \ -+ while(ListElem) \ -+ { \ -+ if(Elem == (PTIATM_LIST_ENTRY)ListElem->Link.Flink) \ -+ { \ -+ ListElem->Link.Flink = ((PTIATM_LIST_ENTRY)Elem)->Link.Flink; \ -+ if(Elem == (PTIATM_LIST_ENTRY)(_L)->Link.Blink) \ -+ (_L)->Link.Blink = (PTI_LIST_ENTRY) 0; \ -+ break; \ -+ } \ -+ ListElem = (PTIATM_LIST_ENTRY)ListElem->Link.Flink; \ -+ }\ -+ } \ -+ ((PTIATM_LIST_ENTRY)Elem)->Link.Flink = (PTI_LIST_ENTRY) 0; \ -+} -+ -+#define QueuePopTail(_L) \ -+((PTIATM_LIST_ENTRY)((_L)->Link.Blink)); QueueRemoveTail(_L); -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/release.txt linux.dev/drivers/atm/sangam_atm/release.txt ---- linux.old/drivers/atm/sangam_atm/release.txt 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/release.txt 2005-08-23 04:46:50.104842632 +0200 -@@ -0,0 +1,118 @@ -+This is release notes for AR7 Linux ATM driver. -+ -+version 04.02.04.00 -+------------------- -+ -+1. Corrected the conditional logic from logical AND to logical OR in the case -+ of check for DSL line down condition. This is to fix PPPoA crashing -+ problem when DSL line is unplugged. -+ -+version 04.02.03.00 -+------------------- -+1. Changed overlay page to static allocation. -+2. Added flag to stop TX during channel closing. -+3. Changed DMA memory allocation back to "GFP_ATOMIC" flag. -+ -+version 04.02.02.00 -+------------------- -+1. Changed DMA memory allocation from "GFP_ATOMIC" to "GFP_KERNEL" flag. -+2. Added "DoMask" setting for VBR channel setup. -+ -+version 04.02.01.01 -+------------------- -+1. Modified priority check scheme per SPTC request. -+ -+Version 04.02.01.00 -+------------------- -+1. Add check to skb->priority to place packets to either normal or priority queue. -+2. Add spin lock to increment and decrement of queued buffer number. -+ -+Version 04.02.00.00 -+------------------- -+Features: -+1. Add MBS and CDVT QoS support for ATM driver. -+2. Add "stop/start queue" for ToS application. -+3. Add Showtime margin retrain based on EOC message. -+4. Add EOC vendor ID customalization logic for Annex B. -+5. Supports D3 datapump. -+ -+Version 04.01.00.00 -+------------------- -+Re-release of 04.00.07.00 for D1.1 datapump. -+ -+Version 04.00.07.00 -+------------------- -+Features: -+1. Add marging retrain capability by setting following Adam2 Env. -+ setenv enable_margin_retrain 1 -+ setenv margin_threshold xx, xx is in half db, i.e., 10 means 5db. -+ -+Bugfixs: -+1. New PDSP firmware that fix the F5 OAM cell loopback probelm in Cisco DSLAM. -+ -+Version 04.00.06.00 -+------------------- -+1. ATM interrupt pacing is defauted to 2 interrupts/s. -+2. Rx Service MAX changed ftom 16 to 8. -+ -+Version 04.00.05.00 -+------------------- -+Features: -+1. Add Adam2 env to disable the TurboDSL by entering "setenv TurboDSL 0". -+2. Add ability to set interrupt pacing for ATM driver. -+ -+Bugfixs: -+1. Fixed the RFC2684 and CLIP problems for Cisco router. -+2. Fixed LED blinking problem when DSL cable is unplugged. -+3. Fixed problem that "selected mode" is not updated. -+ -+Version 04.00.04.00 -+------------------- -+Features: -+1. Added feature so OAM F5 ping will not require a corresponding PVC channel to -+ be setup. -+2. Added timeout value for F5 OAM ping. The new command are "exxxpyyycdzzzt" for -+ end-to-end and "sxxxpyyycdzzzt" for segment. "zzz" is timeout value in milli-second. -+3. Added proc entry "avsar_pvc_table" to record received VPIs and VCIs. The format is -+ vpi,vci -+ seperated by new line. To search for PVCs, an application can do the following. -+ i) Send a (or several) F5 OAM cell on a VPI/VPI pairs with command -+ echo exxxpyyycd2t > /proc/sys/dev/dslmod -+ ii) Wait >2ms or poll proc entry /proc/avalanche/avsar_oam_ping until the result -+ indicates a failure. (It will be failed all the time with 2ms timeout.) -+ iii) Repeat above two steps for new VPI/VCI pairs. -+ iv) Check proc entry /proc/avalanche/avsar_pvc_table any time for PVCs that responded. -+ -+Version 04.00.03.00 -+------------------- -+Bug Fixs: -+1. Fixed bug that caused crash when phone cable is unplugged. -+2. Fixed LED operation for "flexible LEDs". -+ -+Features: -+1. Added the proc entry "avsar_oam_ping" to signal oam ping result. -+ 0 - failed; 1 - success; 2 - in progress. -+2. Added oam ping timeout env variable. The timeout can be specified by -+ adding Adam2 env "oam_lb_timeout". The value is in millisecond. -+ -+Version 04.00.02.00 -+------------------- -+1. The driver uses hardware queue for Turbo DSL. -+2. Added new modem statistics listed below: -+ US and DS TX powers, atuc Vendor ID and revision, training mode selected, -+ Hybrid Selected, and etc. -+ -+Version 04.00.01.00 -+------------------- -+ -+1. This driver release contains all the features that exists in AR5 Linux ATM -+ 3.1 driver. -+ -+2. F4 OAM generation is added. -+ -+3. Software queuing is used for TURBO DSL. -+ -+4. Porting guide "is created. Please look into that document for detailed -+ information. -+ -+ -diff -urN linux.old/drivers/atm/sangam_atm/syssw_version.h linux.dev/drivers/atm/sangam_atm/syssw_version.h ---- linux.old/drivers/atm/sangam_atm/syssw_version.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/syssw_version.h 2005-08-23 04:46:50.105842480 +0200 -@@ -0,0 +1,94 @@ -+#ifndef __SYSSW_VERSION_H__ -+#define __SYSSW_VERSION_H__ 1 -+ -+/******************************************************************************* -+* FILE PURPOSE: DSL Driver API functions for Sangam -+* -+******************************************************************************** -+* FILE NAME: dsl_hal_basicapi.c -+* -+* DESCRIPTION: -+* Contains basic DSL HAL APIs for Sangam -+* -+* (C) Copyright 2003-04, Texas Instruments, Inc. -+* History -+* Date Version Notes -+* 14May03 0.00.00 RamP Original Version Created -+* 14May03 0.00.01 RamP Initial Rev numbers inserted -+* 14May03 0.00.02 RamP Bumped version numbers for Dsl Hal -+* & dhalapp for alpha plus -+* 19May03 0.00.03 MCB Bumped dslhal version number -+* because of dependant changes -+* wrt. linux-nsp atm drivers. -+* 22May03 0.00.04 RamP Bumped dslhal & dhalapp buildnum -+* for inner/outer pair & DGASP code -+* 06Jun03 0.00.05 RamP Bumped up buildnum for LED, STM, -+* interrupt processing, statistics -+* and other pre-beta features -+* 09Jun03 0.00.06 JEB Fixed error in DHALAPP bugfix/buildnum -+* 09Jun03 0.00.07 RamP Bumped up buildnum for incremental -+* changes to apis, statistics, memory -+* fixes, parameter configurations -+* 11Jun03 0.00.08 RamP Bumped up buildnum for Co profile -+* free memory fix -+* 12Jun03 0.00.09 JEB Bumped version numbers for AR7 1.00 Beta -+* 02Jul03 0.00.10 ZT Bumped HAL version for overlay page -+* 18Jul03 0.00.11 RamP Bumped HAL version for analog diags -+* 22Jul03 0.00.12 JEB Bumped DHALAPP buildnum for analog diags -+* 31Jul03 0.00.13 RamP Bumped HAL version for engr. drop -+* 04Aug03 0.00.14 JEB Bumped HAL version buildnum for CHECKPOINT65 changes -+* Bumped LINUX version buildnum for CHECKPOINT65 changes -+* 06Aug03 0.00.15 MCB Bumped all version numbers in prep for AR7 1.0 R2 release for POTS. -+* 13Aug03 0.00.16 MCB Set rev id's for D3/R1.1 (ADSL2). -+* 21Aug03 0.00.17 JEB Bumped up build numbers for merge of code additions from D1 -+* 26Sep03 0.00.18 JEB Set rev id's for another D3/R1 (ADSL2). -+* 14Oct03 0.00.19 JEB Bumped Linux minor number and reset bugfix number for release. -+* Bumped build numbers on DSLHAL and DHALAPP for this checkpoint. -+* 14Oct03 0.00.20 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT15. -+* 21Oct03 0.00.21 JEB Bumped build number on DSLHAL for CHECKPOINT16. -+* 22Oct03 0.00.22 MCB Bumped all version numbers in support of D3R1 release. -+* 27Oct03 0.00.23 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT19. -+* Updated version for DSLAGENT to be 02.01.00.01 for ACT 2.1 R0. -+* 30Oct03 0.00.24 JEB Bumped bugfix number on LINUXATM Version for next release. -+* Bumped build numbers on DSLHAL and DHALAPP -+* 31Oct03 0.00.25 MCB Bumped all version numbers in support of D3R2 release. -+* 14Nov03 0.00.26 JEB Bumped build numbers on DSLHAL and DHALAPP -+* Changed version for DSLAGENT to be 02.00.01.01 for an ACT 2.0 R0 -+* 20Nov03 0.00.27 JEB Bumped build number on DSLHAL. -+* Changed version for DSLAGENT to be 02.00.02.00 for the next ACT 2.0 R2 -+* 21Nov03 0.00.28 MCB Bumped all version numbers in support of D3R2 release. -+* 21Nov03 0.00.29 JEB Bumped build numbers on DSLHAL and DHALAPP for D3-R0 drop on 11/21. -+* 16Dec03 0.00.30 JEB Bumped build numbers on DSLHAL and DHALAPP for CHECKPOINT31. -+* 21Dec03 0.00.31 MCB Bumped all version numbers in support of D3R2 release. -+* 05Jan04 0.00.32 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 34. -+* 15Jan04 0.00.33 JEB Bumped build numbers on DSLHAL and Linux ATM for CHECKPOINT 36. -+* 26Jan04 0.00.34 JEB Changed Linux ATM version number to be 04.02.03.00. -+* 27Jan04 0.00.35 MCB Bumped all version numbers in support of D3R2 release. -+*******************************************************************************/ -+ -+/* Dsl Hal API Version Numbers */ -+#define DSLHAL_VERSION_MAJOR 03 -+#define DSLHAL_VERSION_MINOR 00 -+#define DSLHAL_VERSION_BUGFIX 06 -+#define DSLHAL_VERSION_BUILDNUM 00 -+#define DSLHAL_VERSION_TIMESTAMP 00 -+ -+/* dhalapp Adam2 Application Version Numbers */ -+#define DHALAPP_VERSION_MAJOR 03 -+#define DHALAPP_VERSION_MINOR 00 -+#define DHALAPP_VERSION_BUGFIX 05 -+#define DHALAPP_VERSION_BUILDNUM 00 -+ -+/* Linux ATM Driver Version Numbers */ -+#define LINUXATM_VERSION_MAJOR 04 -+#define LINUXATM_VERSION_MINOR 02 -+#define LINUXATM_VERSION_BUGFIX 04 -+#define LINUXATM_VERSION_BUILDNUM 00 -+ -+/* DSL Agent Version Numbers */ -+#define DSLAGENT_VERSION_MAJOR 02 -+#define DSLAGENT_VERSION_MINOR 00 -+#define DSLAGENT_VERSION_BUGFIX 02 -+#define DSLAGENT_VERSION_BUILDNUM 00 -+ -+#endif /* pairs with #ifndef __SYSSW_VERSION_H__ */ -diff -urN linux.old/drivers/atm/sangam_atm/tn7api.h linux.dev/drivers/atm/sangam_atm/tn7api.h ---- linux.old/drivers/atm/sangam_atm/tn7api.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/tn7api.h 2005-08-23 04:46:50.105842480 +0200 -@@ -0,0 +1,54 @@ -+/* -+ * Tnetd73xx ATM driver. -+ * by Zhicheng Tang, ztang@ti.com -+ * 2000 (c) Texas Instruments Inc. -+ * -+ * -+*/ -+ -+#ifndef __SAPI_H -+#define __SAPI_H -+ -+/* tn7atm.c */ -+void xdump(unsigned char *buff, int len, int debugLev); -+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data); -+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size); -+void tn7atm_free_rx_skb(void *skb); -+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num); -+int tn7atm_send_complete(void *osSendInfo); -+int tn7atm_device_connect_status(void *priv, int state); -+int tn7atm_lut_find(short vpi, int vci); -+ -+/* tn7dsl.h */ -+void tn7dsl_exit(void); -+int tn7dsl_init(void *priv); -+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+int tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+int tn7dsl_handle_interrupt(void); -+void dprintf( int uDbgLevel, char * szFmt, ...); -+void tn7dsl_dslmod_sysctl_register(void); -+void tn7dsl_dslmod_sysctl_unregister(void); -+int tn7dsl_get_dslhal_version(char *pVer); -+int tn7dsl_get_dsp_version(char *pVer); -+ -+int os_atoi(const char *pStr); -+int os_atoh(const char *pStr); -+unsigned long os_atoul(const char *pStr); -+ -+/* tn7sar.c */ -+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos); -+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv); -+int tn7sar_register_interrupt_handle(void *os_dev, void *hal_isr, int *interrupt_num); -+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv); -+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan); -+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv); -+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority); -+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer); -+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count); -+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout); -+int tn7sar_get_stats(void *priv1); -+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls); -+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.c linux.dev/drivers/atm/sangam_atm/tn7atm.c ---- linux.old/drivers/atm/sangam_atm/tn7atm.c 2005-08-28 01:52:26.000000000 -0600 -+++ linux.dev/drivers/atm/sangam_atm/tn7atm.c 2005-08-28 02:08:07.000000000 -0600 -@@ -0,0 +1,1233 @@ -+/* -+ * tn7.c -+ * Linux atm module implementation. -+ * Zhicheng Tang 01/08/2003 -+ * 2003 (c) Texas Instruments Inc. -+ * -+ * -+*/ -+ -+#include <linux/config.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/atmdev.h> -+#include <linux/delay.h> -+#include <linux/spinlock.h> -+#include <linux/smp_lock.h> -+#include <asm/io.h> -+#include <asm/mips-boards/prom.h> -+#include <linux/proc_fs.h> -+#include <linux/string.h> -+#include <linux/ctype.h> -+#include "tn7atm.h" -+#include "tn7api.h" -+#include "syssw_version.h" -+ -+#ifdef CONFIG_LED_MODULE -+#include <asm/ar7/ledapp.h> -+#endif -+#include <asm/ar7/avalanche_intc.h> -+ -+#ifdef MODULE -+MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver"); -+MODULE_AUTHOR ("Zhicheng Tang"); -+#endif -+ -+/* Version Information */ -+//static char atm_version[] ="1.0.0.1"; -+ -+#define TRUE 1 -+#define FALSE 0 -+ -+#define STOP_EMPTY_BUFF 2 -+#define START_EMPTY_BUFF 3 -+/* externs */ -+ -+/*end of externs */ -+ -+#define tn7atm_kfree_skb(x) dev_kfree_skb(x) -+ -+/* prototypes */ -+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci); -+ -+void tn7atm_close (struct atm_vcc *vcc); -+ -+static int tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg); -+ -+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb); -+ -+static int tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags); -+ -+static int tn7atm_detect(void); -+static int tn7atm_init(struct atm_dev* dev); -+//static int tn7atm_reset(void); -+static int tn7atm_irq_request(struct atm_dev* dev); -+static int tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+static void tn7atm_exit(void); -+static int tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data); -+static int tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof,void *data); -+//static void tn7atm_free_packet(void *vcc1, void *priv, void *skb1); -+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1); -+ -+#include "turbodsl.c" -+ -+/* ATM device operations */ -+ -+struct atm_dev *mydev; -+ -+static const struct atmdev_ops tn7atm_ops = { -+ open: tn7atm_open, -+ close: tn7atm_close, -+ ioctl: tn7atm_ioctl, -+ getsockopt: NULL, -+ setsockopt: NULL, -+ send: tn7atm_send, -+ sg_send: NULL, -+ phy_put: NULL, -+ phy_get: NULL, -+ change_qos: tn7atm_change_qos, -+}; -+ -+ -+int __guDbgLevel = 1; -+ -+ -+void xdump(unsigned char *buff, int len, int debugLev) -+{ -+#ifdef DEBUG_BUILD -+ int i, j; -+ if( __guDbgLevel < debugLev) -+ return; -+ -+ j=0; -+ for(i=0;i<len;i++) -+ { -+ printk("%02x ", buff[i]); -+ j++; -+ if(j==8) -+ { -+ j=0; -+ printk("\n"); -+ } -+ } -+ printk("\n"); -+#endif -+} -+ -+ -+#if 0 /* by nbd */ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci) -+ * -+ * Description: retrieve VPI/VCI for connection -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+static int -+tn7atm_walk_vccs(struct atm_vcc *vcc, short *vpi, int *vci) -+{ -+ struct atm_vcc* walk; -+ -+ // printk(tn7 "tn7atm_walk_vccs\n"); -+ /* find a free VPI */ -+ if (*vpi == ATM_VPI_ANY) { -+ -+ for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next) { -+ -+ if ((walk->vci == *vci) && (walk->vpi == *vpi)) { -+ (*vpi)++; -+ walk = vcc->dev->vccs; -+ } -+ } -+ } -+ -+ /* find a free VCI */ -+ if (*vci == ATM_VCI_ANY) { -+ -+ for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk; walk = walk->next) { -+ -+ if ((walk->vpi = *vpi) && (walk->vci == *vci)) { -+ *vci = walk->vci + 1; -+ walk = vcc->dev->vccs; -+ } -+ } -+ } -+ -+ return 0; -+} -+#endif -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_sar_irq(void) -+ * -+ * Description: tnetd73xx SAR interrupt. -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+static void -+tn7atm_sar_irq(int irq , void *voiddev , struct pt_regs *regs) -+{ -+ struct atm_dev *atmdev; -+ Tn7AtmPrivate *priv; -+ -+ dprintf(6, "tn7atm_sar_irq\n"); -+ atmdev = (struct atm_dev *) voiddev; -+ priv = (Tn7AtmPrivate *)atmdev->dev_data; -+ -+ tn7sar_handle_interrupt(atmdev, priv); -+ -+ dprintf(6, "Leaving tn7atm_sar_irq\n"); -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_dsl_irq(void) -+ * -+ * Description: tnetd73xx DSL interrupt. -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+static void -+tn7atm_dsl_irq(int irq , void *voiddev , struct pt_regs *regs) -+{ -+ struct atm_dev *atmdev; -+ Tn7AtmPrivate *priv; -+ -+ dprintf(4, "tn7atm_dsl_irq\n"); -+ atmdev = (struct atm_dev *) voiddev; -+ priv = (Tn7AtmPrivate *)atmdev->dev_data; -+ -+ tn7dsl_handle_interrupt(); -+ -+ dprintf(4, "Leaving tn7atm_dsl_irq\n"); -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_Inittxcomp(struct tn7* tn7) -+ * -+ * Description: Initialize Interrupt handler -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -+static int __init -+tn7atm_irq_request (struct atm_dev *dev) -+{ -+ Tn7AtmPrivate *priv; -+ char *ptr; -+ int ipace=2; -+ -+ dprintf(4, "tn7atm_irq_request()\n"); -+ priv = (Tn7AtmPrivate *) dev->dev_data; -+ -+ /* Register SAR interrupt */ -+ priv->sar_irq = LNXINTNUM(ATM_SAR_INT); /* Interrupt line # */ -+ if (request_irq(priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev)) -+ printk ("Could not register tn7atm_sar_irq\n"); -+ -+ /* interrupt pacing */ -+ ptr= prom_getenv("sar_ipacemax"); -+ if(ptr) -+ { -+ ipace=os_atoi(ptr); -+ } -+ avalanche_request_pacing(priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, ipace); -+ -+ /* Reigster Receive interrupt A */ -+ priv->dsl_irq = LNXINTNUM(ATM_DSL_INT); /* Interrupt line # */ -+ if (request_irq(priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev)) -+ printk ("Could not register tn7atm_dsl_irq\n"); -+ -+ return 0; -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_lut_find(struct atm_vcc *vcc) -+ * -+ * Description: find an TX DMA channel -+ * that matches a vpi/vci pair -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -+int -+tn7atm_lut_find(short vpi, int vci) -+{ -+ int i; -+ Tn7AtmPrivate *priv; -+ -+ priv = (Tn7AtmPrivate *)mydev->dev_data; -+ -+ if(vci==0) // find first vpi channel -+ { -+ for(i=0; i< MAX_DMA_CHAN; i++) -+ { -+ if((priv->lut[i].vpi == vpi)) -+ return i; -+ } -+ } -+ -+ dprintf(4, "vpi=%d, vci=%d\n", vpi, vci); -+ for(i=0; i< MAX_DMA_CHAN; i++) -+ { -+ if((priv->lut[i].vpi == vpi) && (priv->lut[i].vci == vci)) -+ return i; -+ } -+ -+ -+ -+ return ATM_NO_DMA_CHAN; -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_lut_clear(struct atm_vcc *vcc,int chan) -+ * -+ * Description: find an TX DMA channel -+ * that matches a vpi/vci pair -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -+static int -+tn7atm_lut_clear(struct atm_vcc *vcc, int chan) -+{ -+ Tn7AtmPrivate *priv; -+ -+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data; -+ -+ memset(&priv->lut[chan], 0, sizeof(priv->lut[chan])); -+ -+ return 0; -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_walk_lut(void) -+ * -+ * Description: find an available TX DMA channel -+ * and initialize LUT -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -+static int -+tn7atm_walk_lut(Tn7AtmPrivate *priv) -+{ -+ int i; -+ -+ for(i=0; i< MAX_DMA_CHAN; i++){ -+ if(!priv->lut[i].inuse) -+ { -+ return i; /* return available dma channel number */ -+ } -+ } -+ return ATM_NO_DMA_CHAN; /* no tx dma channels available */ -+} -+ -+static int -+tn7atm_set_lut(Tn7AtmPrivate *priv, struct atm_vcc *vcc, int chan) -+{ -+ -+ if(!priv->lut[chan].inuse) -+ { -+ priv->lut[chan].vpi = (int)vcc->vpi; -+ priv->lut[chan].vci = vcc->vci; -+ priv->lut[chan].chanid = chan; -+ priv->lut[chan].inuse = 1; /* claim the channel */ -+ priv->lut[chan].vcc = (void *)vcc; -+ priv->lut[chan].bClosing = 0; -+ priv->lut[chan].ready = 0; -+ priv->lut[chan].tx_total_bufs = TX_BUFFER_NUM; -+ priv->lut[chan].tx_used_bufs[0] = 0; -+ priv->lut[chan].tx_used_bufs[1] = 0; -+ return 0; -+ } -+ return -1; /* no tx dma channels available */ -+} -+ -+#if 0 -+static void tn7atm_free_packet(void *pVc, void *pDev, void *pPacket) -+ { -+ Tn7AtmPrivate *priv; -+ struct atm_vcc *vcc; -+ struct sk_buff *skb; -+ -+ vcc = (struct atm_vcc *)pVc; -+ priv = (Tn7AtmPrivate *)pDev; -+ skb = (struct sk_buff *) pPacket; -+ -+ if(vcc->pop) -+ vcc->pop(vcc, skb); -+ else -+ tn7atm_kfree_skb(skb); -+ } -+#endif -+ -+static void str2eaddr(char *pMac, char *pStr) -+{ -+ char tmp[3]; -+ int i; -+ -+ for(i=0;i<6;i++) -+ { -+ tmp[0]=pStr[i*3]; -+ tmp[1]=pStr[i*3+1]; -+ tmp[2]=0; -+ pMac[i]=os_atoh(tmp); -+ } -+} -+ -+static int __init -+tn7atm_get_ESI(struct atm_dev *dev) -+{ -+ int i; -+ char esi_addr[ESI_LEN]={0x00,0x00,0x11,0x22,0x33,0x44}; -+ char *esiaddr_str = NULL; -+ -+ esiaddr_str = prom_getenv("macc"); -+ -+ if (!esiaddr_str) { -+ //printk("macc address not set in adam2 environment space\n"); -+ //printk("Using default macc address = 00:01:02:03:04:05\n"); -+ esiaddr_str = "00:00:02:03:04:05"; -+ } -+ str2eaddr(esi_addr, esiaddr_str); -+ -+ for(i=0; i < ESI_LEN; i++) -+ dev->esi[i] = esi_addr[i]; -+ -+ return 0; -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_open(struct atm_vcc *vcc, short vpi, int vci) -+ * -+ * Description: Device operation: open -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -+//static int -+int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci) -+{ -+ Tn7AtmPrivate *priv; -+ int dmachan; -+ int rc; -+ int traffic_type; -+ int pcr = 0x20000; -+ int scr = 0x20000; -+ int mbs = 0x20000; -+ int cdvt = 10000; -+ int err; -+ -+ dprintf(1, "tn7atm_open()\n"); -+ -+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data; -+ if(priv==NULL) -+ { -+ printk("null priv\n"); -+ return -1; -+ } -+ -+ MOD_INC_USE_COUNT; -+ -+#if 0 /* by nbd */ -+ /* find a free VPI/VCI */ -+ tn7atm_walk_vccs(vcc, &vpi, &vci); -+#else -+ if ((err = atm_find_ci(vcc, &vpi, &vci))) { -+ printk("atm_find_ci err = %d\n", err); -+ return err; -+ } -+ -+#endif -+ -+ vcc->vpi = vpi; -+ vcc->vci = vci; -+ -+ if (vci == ATM_VCI_UNSPEC || vpi == ATM_VCI_UNSPEC) -+ { -+ MOD_DEC_USE_COUNT; -+ return -EBUSY; -+ } -+ -+ /* check to see whether PVC is opened or not */ -+ if((dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci)) != ATM_NO_DMA_CHAN) -+ { -+ MOD_DEC_USE_COUNT; -+ printk("PVC already opened. dmachan = %d\n", dmachan); -+ return -EBUSY; -+ } -+ /*check for available channel */ -+ if((dmachan = tn7atm_walk_lut(priv)) == ATM_NO_DMA_CHAN) -+ { -+ printk("No TX DMA channels available\n"); -+ return -EBUSY; -+ } -+ -+ set_bit(ATM_VF_ADDR, &vcc->flags); /* claim address */ -+ -+ vcc->itf = vcc->dev->number; /* interface number */ -+ -+ switch(vcc->qos.txtp.traffic_class) -+ { -+ case ATM_CBR: /* Constant Bit Rate */ -+ traffic_type = 0; -+ pcr = vcc->qos.txtp.pcr; -+ scr = vcc->qos.txtp.pcr; -+ cdvt = vcc->qos.txtp.max_cdv; -+ printk("cdvt=%d\n", cdvt); -+ break; -+ case ATM_UBR: /* Unspecified Bit Rate */ -+ traffic_type = 2; -+ break; -+ -+ /* Disable ATM_VBR until pppd ppoatm plugin supports it. -+ * NOTE: Support ATM_VBR requires the addition of a scr -+ * field to the atm_trafprm structure which will cause -+ * a change in the SO_ATMQOS ioctl. Make sure that the -+ * revised header file becomes visible to the pppd -+ * pppoatm plugin source, or the SO_ATMQOS ioctl will fail. -+ */ -+#if 0 -+ case ATM_VBR: /* Variable Bit Rate */ -+ traffic_type = 1; -+ pcr = vcc->qos.txtp.pcr; -+ scr = vcc->qos.txtp.scr; -+ if(vcc->qos.txtp.max_pcr >= 0) -+ mbs = vcc->qos.txtp.max_pcr; -+ cdvt = vcc->qos.txtp.max_cdv; -+ printk("cdvt=%d\n", cdvt); -+ printk("mbs=%d\n", mbs); -+ break; -+#endif -+ default: -+ traffic_type = 2; -+ } -+ -+ dprintf(4, "vpi=%d, vci=%d, pcr=%d, dmachan=%d, qos=%d\n", vpi,vci,pcr,dmachan,traffic_type); -+ /* Activate SAR channel */ -+ rc = tn7sar_activate_vc(priv, vpi, vci, pcr, scr, mbs, cdvt, dmachan, traffic_type); -+ if(rc < 0) -+ { -+ -+ MOD_DEC_USE_COUNT; -+ return -EBUSY; -+ } -+ -+ /* insure that the the vcc struct points to the correct entry -+ in the lookup table */ -+ -+ tn7atm_set_lut(priv,vcc, dmachan); -+ vcc->dev_data = (void *)&priv->lut[dmachan]; -+ set_bit(ATM_VF_READY, &vcc->flags); -+ -+ mdelay(100); -+ priv->lut[dmachan].ready = 1; -+ dprintf (1, "Leave tn7atm_open\n"); -+ return 0; -+} -+ -+ -+//static void -+void tn7atm_close (struct atm_vcc *vcc) -+{ -+ Tn7AtmPrivate *priv; -+ int dmachan; -+ -+ priv = (Tn7AtmPrivate *)vcc->dev->dev_data; -+ dprintf(4, "closing %d.%d.%d.%d\n", vcc->itf, vcc->vpi, vcc->vci, vcc->qos.aal); -+ -+ clear_bit(ATM_VF_READY, &vcc->flags); /* ATM_VF_READY: channel is ready to transfer data */ -+ -+ dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci); -+ printk("closing channel: %d\n", dmachan); -+ if(dmachan == ATM_NO_DMA_CHAN) -+ { -+ printk("Closing channel not found.\n"); -+ return; -+ } -+ priv->lut[dmachan].bClosing = 1; -+ priv->lut[dmachan].ready = 0; -+ if(tn7sar_deactivate_vc(priv,dmachan)) /* tear down channel */ -+ { -+ printk("failed to close channel %d.\n", dmachan); -+ } -+ -+ clear_bit(ATM_VF_READY, &vcc->flags); /* ATM_VF_READY: channel is ready to transfer data */ -+ tn7atm_lut_clear(vcc, dmachan); -+ -+ MOD_DEC_USE_COUNT; -+ -+ dprintf (1, "Leave tn7atm_close\n"); -+} -+ -+#define ATM_TXSTOP 0x800c61f4 -+static int -+tn7atm_ioctl (struct atm_dev *dev, unsigned int cmd, void *arg) -+{ -+ Tn7AtmPrivate *priv; -+ priv = (Tn7AtmPrivate *) dev->dev_data; -+ -+ //printk("tn7atm_ioctl\n"); -+ //printk("arg = %x\n", *(int *)arg); -+ //printk("cmd =%x\n", cmd); -+ switch(cmd) -+ { -+ -+ case ATM_TXSTOP: /*temp fix for SAR tear down problem */ -+// printk("ioctl cmd = 0x%x (%u), arg = 0x%p (%lu)\n", cmd, cmd, arg, (unsigned long)arg); -+// printk("arg = %d\n", *(int*)arg); -+ priv->xmitStop = *(int *)arg; -+ //printk("Executing ATM_SETLOOP for tn7 \n"); -+ //printk("Stop variable = :%d: \n",priv->xmitStop); -+ return 0; -+ -+ //case SAR_DSL_RESET_SOFTBOOT: -+ // return tn7atm_dsl_clean_reboot(); -+ case 0: -+ return 0; -+ } -+ -+ return -ENOSYS; -+ -+} -+ -+static int -+tn7atm_change_qos (struct atm_vcc *vcc, struct atm_qos *qos,int flags) -+{ -+ dprintf (1, "Enter tn7atm_change_qos\n"); -+ dprintf (1, "Leave tn7atm_change_qos\n"); -+ return 0; -+} -+ -+ -+int tn7atm_send (struct atm_vcc *vcc, struct sk_buff *skb) -+{ -+ -+ Tn7AtmPrivate *priv; -+ int bret; -+ int chan; -+ -+ dprintf(4, "tn7atm_send()\n"); -+ -+ priv = (Tn7AtmPrivate*)vcc->dev->dev_data; -+ -+ //if(skb->len < 64) -+ //xdump((unsigned char *)skb->data, skb->len, 1); -+ //else -+ //xdump((unsigned char *)skb->data, 64, 1); -+ /* check for dsl line connection */ -+ -+ /* add vcc field in skb for clip inATMARP fix */ -+ ATM_SKB(skb)->vcc = vcc; -+ /* Ron change 2.3 -> 2.4 ??*/ -+ //if(priv->lConnected != 1 || priv->xmitStop == 1) -+ if(priv->lConnected != 1 && priv->xmitStop == 1) -+ { -+ dprintf(4,"dsl line down\n"); -+ if(vcc->pop) -+ vcc->pop(vcc, skb); -+ else -+ tn7atm_kfree_skb(skb); -+ return 1; -+ } -+ -+ /* check whether PVC is closing */ -+ chan = tn7atm_lut_find(vcc->vpi, vcc->vci); -+ /* set br2684 dev pointer */ -+ priv->lut[chan].net_device = skb->dev; -+ if(chan == ATM_NO_DMA_CHAN || priv->lut[chan].bClosing == 1) -+ { -+ dprintf(4, "can find sar channel\n"); -+ if(vcc->pop) -+ vcc->pop(vcc, skb); -+ else -+ tn7atm_kfree_skb(skb); -+ return 1; -+ } -+ -+ bret=tn7atm_queue_packet_to_sar(vcc, skb); -+ -+ return bret; -+} -+ -+ -+static int tn7atm_queue_packet_to_sar(void *vcc1, void *skb1) -+{ -+ struct atm_vcc *vcc; -+ struct sk_buff *skb; -+ int priority = 1; -+ Tn7AtmPrivate *priv; -+ int dmachan; -+ -+ vcc = (struct atm_vcc *)vcc1; -+ skb = (struct sk_buff *)skb1; -+ -+ priv = (Tn7AtmPrivate*)vcc->dev->dev_data; -+ -+ dprintf(4, "vcc->vci=%d\n", vcc->vci); -+ dmachan = tn7atm_lut_find(vcc->vpi, vcc->vci); -+ if(dmachan == ATM_NO_DMA_CHAN) -+ { -+ dprintf(4, "can find sar channel\n"); -+ if(vcc->pop) -+ vcc->pop(vcc, skb); -+ else -+ tn7atm_kfree_skb(skb); -+ return 1; -+ } -+ -+ // turbo dsl TCP ack check -+ if(priv->bTurboDsl) -+ priority = turbodsl_check_priority_type(skb->data); -+ -+ //skb priority check -+ if(priority != 0) -+ { -+ if((skb->cb[47])>>1) -+ priority=1; -+ else -+ priority = 0; -+ } -+ -+ /* add queue info here */ -+ skb->cb[47] = (char)priority; -+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ priv->lut[dmachan].tx_used_bufs[priority]++; -+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ -+ if(tn7sar_send_packet(priv,dmachan, skb, skb->data, skb->len, priority) != 0) -+ { -+ dprintf(1, "failed to send packet\n"); -+ if(vcc->pop) -+ vcc->pop(vcc, skb); -+ else -+ tn7atm_kfree_skb(skb); -+ -+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ priv->lut[dmachan].tx_used_bufs[priority]--; -+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ return 1; -+ } -+ -+ /* check for whether tx queue is full or not */ -+ //printk("bufs used = %d\n", priv->lut[dmachan].tx_used_bufs[1]); -+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ if(priv->lut[dmachan].tx_used_bufs[1] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF) || -+ priv->lut[dmachan].tx_used_bufs[0] >= (priv->lut[dmachan].tx_total_bufs - STOP_EMPTY_BUFF)) -+ { -+ //printk("net queue stoped\n"); -+ netif_stop_queue(priv->lut[dmachan].net_device); -+ priv->lut[dmachan].netqueue_stop = 1; -+ } -+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ -+ return 0; -+} -+ -+/* functions needed by SAR HAL */ -+ -+int tn7atm_send_complete(void *osSendInfo) -+{ -+ Tn7AtmPrivate *priv; -+ //struct atm_dev *dev; -+ struct sk_buff *skb; -+ struct atm_vcc *vcc; -+ int chan; -+ -+ dprintf(4, "tn7atm_send_complete()\n"); -+ -+ -+ skb = (struct sk_buff *)osSendInfo; -+ //dev = (struct atm_dev *) (skb->dev); -+ priv = (Tn7AtmPrivate *)mydev->dev_data; -+ vcc =ATM_SKB(skb)->vcc; -+ if(vcc) -+ { -+ dprintf(4, "vcc->vci=%d\n",vcc->vci ); -+ chan = tn7atm_lut_find(vcc->vpi, vcc->vci); -+ if(chan==ATM_NO_DMA_CHAN) -+ return 1; -+ -+ /*decreament packet queued number */ -+ spin_lock_irqsave(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ priv->lut[chan].tx_used_bufs[(int)skb->cb[47]] --; -+ if(priv->lut[chan].tx_used_bufs[1] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF && -+ priv->lut[chan].tx_used_bufs[0] < priv->lut[chan].tx_total_bufs - START_EMPTY_BUFF) -+ { -+ if(priv->lut[chan].netqueue_stop) -+ { -+ //printk("net queue restarted\n"); -+ netif_wake_queue(priv->lut[chan].net_device); -+ priv->lut[chan].netqueue_stop = 0; -+ } -+ } -+ spin_unlock_irqrestore(&priv->netifqueueLock, priv->netifqueueLockFlag); -+ -+ if(vcc->pop) -+ { -+ dprintf(5, "free packet\n"); -+ vcc->pop(vcc, skb); -+ } -+ -+ -+ } -+ -+ -+ -+ /* Update Stats: There may be a better place to do this, but this is a start */ -+ priv->stats.tx_packets++; -+#ifdef CONFIG_LED_MODULE -+// led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY); -+#endif -+ -+ /* track number of buffer used */ -+ -+ dprintf(4, "tn7atm_send_complete() done\n"); -+ -+ return 0; -+} -+ -+void *tn7atm_allocate_rx_skb(void *os_dev, void **os_receive_info, unsigned int size) -+{ -+ struct sk_buff *skb; -+ dprintf(4, "tn7atm_allocate_rx_skb size=%d\n", size); -+ size = ((size+3)&0xfffffffc); -+ skb = dev_alloc_skb(size); -+ if(skb==NULL) -+ { -+ //printk("rx allocate skb failed\n"); -+ return NULL; -+ } -+ *os_receive_info = (void *)skb; -+ return (skb->data); -+} -+ -+void tn7atm_free_rx_skb(void *skb) -+{ -+ dprintf(4, "tn7atm_free_rx_skb\n"); -+ tn7atm_kfree_skb((struct sk_buff *)skb); -+} -+ -+ -+int tn7atm_receive(void *os_dev, int ch, unsigned int packet_size, void *os_receive_info, void *data) -+{ -+ Tn7AtmPrivate *priv; -+ struct atm_dev *dev; -+ struct sk_buff *skb; -+ struct atm_vcc *vcc; -+ -+ -+ dprintf(4, "tn7atm_receive()\n"); -+ dev = (struct atm_dev *)os_dev; -+ -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ -+ if(priv->lConnected != 1 || priv->lut[ch].ready == 0) -+ { -+ //printk("channel not ready\n"); -+ return 1; -+ } -+ -+ vcc = (struct atm_vcc *)priv->lut[ch].vcc; -+ if(vcc == NULL) -+ { -+ printk("vcc=Null"); -+ return 1; -+ } -+ -+ -+ /* assume no fragment packet for now */ -+ skb = (struct sk_buff *)os_receive_info; -+ -+ if(skb==NULL) -+ { -+ dprintf(1, "received empty skb.\n"); -+ return 1; -+ } -+ /* see skbuff->cb definition in include/linux/skbuff.h */ -+ ATM_SKB(skb)->vcc = vcc; -+ -+ skb->len = packet_size; -+ dprintf(3, "skb:[0x%p]:0x%x pdu_len: 0x%04x\n",skb,skb->len,packet_size); -+ dprintf(3, "data location: 0x%x, 0x%x\n", (unsigned int)skb->data, (unsigned int)data); -+ -+ /*skb_trim(skb,skb->len); */ /* skb size is incorrect for large packets > 1428 bytes ?? */ -+ __skb_trim(skb,skb->len); /* change to correct > 1500 ping when firewall is on */ -+ -+ dprintf(3, "pushing the skb...\n"); -+ skb->stamp = xtime; -+ -+ xdump((unsigned char *)skb->data, skb->len, 5); -+ -+ if(atm_charge(vcc, skb->truesize) == 0) -+ { -+ dprintf(1,"Receive buffers saturated for %d.%d.%d - PDU dropped\n", vcc->itf, vcc->vci, vcc->vpi); -+ return 1; -+ } -+ -+ /*pass it up to kernel networking layer and update stats*/ -+ vcc->push(vcc,skb); -+ -+ /* Update receive packet stats */ -+ priv->stats.rx_packets++; -+ atomic_inc(&vcc->stats->rx); -+ -+#ifdef CONFIG_LED_MODULE -+// led_operation(MOD_ADSL, DEF_ADSL_ACTIVITY); -+#endif -+ dprintf(3, "(a) Receiving:vpi/vci[%d/%d] chan_id: %d skb len:0x%x skb truesize:0x%x\n", -+ vcc->vpi,vcc->vci,ch,skb->len, skb->truesize); -+ -+ return 0; -+} -+ -+static int -+tn7atm_proc_channels(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ int limit = count - 80; -+ int i; -+ -+ struct atm_dev *dev; -+ Tn7AtmPrivate *priv; -+ -+ dev = (struct atm_dev *)data; -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ -+ if(len<=limit) -+ len += sprintf(buf+len,"Chan Inuse ChanID VPI VCI \n"); -+ if(len<=limit) -+ len += sprintf(buf+len,"------------------------------------------------------------------\n"); -+ -+ for(i=0; i < MAX_DMA_CHAN; i++) -+ { -+ if(len<=limit) -+ { -+ len += sprintf(buf+len, -+ " %02d %05d %05d %05d %05d \n", -+ i,priv->lut[i].inuse,priv->lut[i].chanid, -+ priv->lut[i].vpi,priv->lut[i].vci); -+ } -+ } -+ -+ return len; -+} -+ -+static int -+tn7atm_proc_private(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ int limit = count - 80; -+ struct atm_dev *dev; -+ Tn7AtmPrivate *priv; -+ -+ dev = (struct atm_dev *)data; -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ -+ if(len<=limit) -+ len += sprintf(buf+len, "\nPrivate Data Structure(%s):\n",priv->name); -+ if(len<=limit) -+ len += sprintf(buf+len, "----------------------------------------\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "priv: 0x%p\n",priv); -+ if(len<=limit) -+ len += sprintf(buf+len, "next: 0x%p",priv->next); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tdev: 0x%p\n",priv->dev); -+ -+ if(len<=limit) -+ len += sprintf(buf+len, "tx_irq: %02d",priv->sar_irq); -+ if(len<=limit) -+ len += sprintf(buf+len, "rx_irq: %02d",priv->dsl_irq); -+ -+ -+ return len; -+} -+ -+void tn7atm_sarhal_isr_register(void *os_dev, void *hal_isr, int interrupt_num) -+{ -+ struct atm_dev *dev; -+ Tn7AtmPrivate *priv; -+ -+ dprintf(4, "tn7atm_sarhal_isr_register()\n"); -+ -+ dev = (struct atm_dev *)os_dev; -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ priv->halIsr = (void *)hal_isr; -+ priv->int_num = interrupt_num; -+} -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_exit(void) -+ * -+ * Description: Avalanche SAR exit function -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+ -+static void -+tn7atm_exit (void) -+{ -+ -+ struct atm_dev *dev; -+ -+ Tn7AtmPrivate *priv; -+ -+ dprintf(4, "tn7atm_exit()\n"); -+ -+ dev=mydev; -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ priv->lConnected = 0; -+ tn7dsl_exit(); -+ -+ tn7sar_exit(dev, priv); -+ -+ /* freeup irq's */ -+ free_irq(priv->dsl_irq,priv->dev); -+ free_irq(priv->sar_irq,priv->dev); -+ -+ kfree (dev->dev_data); -+ -+ // atm_dev_deregister (dev); -+ shutdown_atm_dev(dev); -+ -+ /* remove proc entries */ -+ remove_proc_entry("tiatm/avsar_ver",NULL); -+ remove_proc_entry("tiatm/avsar_modem_stats",NULL); -+ remove_proc_entry("tiatm/avsar_modem_training",NULL); -+ remove_proc_entry("tiatm/avsar_channels",NULL); -+ remove_proc_entry("tiatm/avsar_private",NULL); -+ remove_proc_entry("tiatm/avsar_sarhal_stats",NULL); -+ remove_proc_entry("tiatm/avsar_oam_ping",NULL); -+ remove_proc_entry("tiatm/avsar_pvc_table",NULL); -+ remove_proc_entry("tiatm",NULL); -+ tn7dsl_dslmod_sysctl_unregister(); -+ -+ printk ("Module Removed\n"); -+ -+} -+ -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_registration(struct tn7* tn7) -+ * -+ * Description: ATM driver registration -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+ -+static int __init -+tn7atm_register (Tn7AtmPrivate * priv) -+{ -+ /* allocate memory for the device */ -+ -+ dprintf(4,"device %s being registered\n", priv->name); -+ -+ mydev = atm_dev_register (priv->proc_name, &tn7atm_ops, -1, NULL); -+ -+ if (mydev == NULL) -+ { -+ printk ("atm_dev_register returning NULL\n"); -+ return ATM_REG_FAILED; -+ } -+ -+ printk ("registered device %s\n", priv->name); -+ -+ mydev->dev_data = priv; /* setup device data in atm_dev struct */ -+ priv->dev = mydev; /* setup atm_device in avalanche sar struct */ -+ -+ mydev->ci_range.vpi_bits = ATM_CI_MAX; /* atm supports 11 bits */ -+ mydev->ci_range.vci_bits = 16; /* atm VCI max = 16 bits */ -+ -+ -+ return ATM_REG_OK; -+} -+ -+static int -+tn7atm_proc_version(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ char dslVer[8]; -+ char dspVer[10]; -+ char *pSarVer; -+ Tn7AtmPrivate *priv; -+ int i; -+ unsigned int pdspV1, pdspV2; -+ -+ priv = mydev->dev_data; -+ -+ len += sprintf(buf+len, "ATM Driver version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR, -+ LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM); -+ -+ tn7dsl_get_dslhal_version(dslVer); -+ -+ len += sprintf(buf+len, "DSL HAL version: [%d.%02d.%02d.%02d]\n", dslVer[0], dslVer[1], dslVer[2], -+ dslVer[3]); -+ tn7dsl_get_dsp_version(dspVer); -+ -+ len += sprintf(buf+len, "DSP Datapump version: [%d.%02d.%02d.%02d] ", dspVer[4], dspVer[5], dspVer[6], -+ dspVer[7]); -+ if(dspVer[8]==2) // annex B -+ len += sprintf(buf+len, "Annex B\n"); -+ else if(dspVer[8]==3) //annex c -+ len += sprintf(buf+len, "Annex c\n"); -+ else -+ len += sprintf(buf+len, "Annex A\n"); -+ -+ tn7sar_get_sar_version(priv, &pSarVer); -+ -+ len += sprintf(buf+len, "SAR HAL version: ["); -+ for(i=0;i<8;i++) -+ { -+ len += sprintf(buf+len, "%c", pSarVer[i+7]); -+ } -+ len += sprintf(buf+len, "]\n"); -+ -+ tn7sar_get_sar_firmware_version(&pdspV1, &pdspV2); -+ len += sprintf(buf+len, "PDSP Firmware version:[%01x.%02x]\n", -+ pdspV1,pdspV2); -+ -+ return len; -+} -+ -+/* -+static struct net_device_stats -+*tn7atm_get_stats(struct atm_dev *dev) -+{ -+ Tn7AtmPrivate *priv; -+ //unsigned long flags; -+ -+ //spin_lock_irqsave(&priv->stats_lock,flags); -+ priv= (Tn7AtmPrivate *)dev->dev_data; -+ //spin_unlock_irqrestore(&priv->stats_lock,flags); -+ -+ return &priv->stats; -+ -+} -+*/ -+/* Device detection */ -+ -+static int __init -+tn7atm_detect (void) -+{ -+ Tn7AtmPrivate *priv; -+ //static struct proc_dir_entry *proc_dir; -+ -+ dprintf(4, "tn7atm_detect().\n"); -+ /* Device allocated as a global static structure at top of code "mydev" */ -+ -+ /* Alloc priv struct */ -+ priv=kmalloc(sizeof(Tn7AtmPrivate),GFP_KERNEL); -+ if(!priv) -+ { -+ printk("unable to kmalloc priv structure. Killing autoprobe.\n"); -+ return -ENODEV; -+ } -+ memset(priv, 0, sizeof(Tn7AtmPrivate)); -+#ifdef COMMON_NSP -+ priv->name = "TI Avalanche SAR"; -+ priv->proc_name = "avsar"; -+#else -+ priv->name = "TI tnetd73xx ATM Driver"; -+ priv->proc_name = "tn7"; -+#endif -+ -+ if ((tn7atm_register (priv)) == ATM_REG_FAILED) -+ return -ENODEV; -+ -+ tn7atm_init(mydev); -+ -+ /* Set up proc entry for atm stats */ -+ proc_mkdir("tiatm", NULL); -+ create_proc_read_entry("tiatm/avsar_modem_stats",0,NULL,tn7dsl_proc_stats,NULL); -+ create_proc_read_entry("tiatm/avsar_modem_training",0,NULL,tn7dsl_proc_modem,NULL); -+ create_proc_read_entry("tiatm/avsar_ver",0,NULL,tn7atm_proc_version,NULL); -+ create_proc_read_entry("tiatm/avsar_channels",0,NULL,tn7atm_proc_channels,mydev); -+ create_proc_read_entry("tiatm/avsar_private",0,NULL,tn7atm_proc_private,mydev); -+ create_proc_read_entry("tiatm/avsar_sarhal_stats",0,NULL,tn7sar_proc_sar_stat,mydev); -+ create_proc_read_entry("tiatm/avsar_oam_ping",0,NULL,tn7sar_proc_oam_ping,mydev); -+ create_proc_read_entry("tiatm/avsar_pvc_table",0,NULL,tn7sar_proc_pvc_table,mydev); -+ -+ tn7dsl_dslmod_sysctl_register(); -+ -+ printk("Texas Instruments ATM driver: version:[%d.%02d.%02d.%02d]\n",LINUXATM_VERSION_MAJOR, LINUXATM_VERSION_MINOR, -+ LINUXATM_VERSION_BUGFIX, LINUXATM_VERSION_BUILDNUM); -+ return 0; -+} -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_probe(void) -+ * -+ * Description: Avalanche SAR driver probe (see net/atm/pvc.c) -+ * this is utilized when the SAR driver is built -+ * into the kernel and needs to be configured. -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+int __init tn7atm_probe(void) -+{ -+ tn7atm_detect(); -+ return -ENODEV; -+} -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int tn7atm_init(struct atm_dev *dev) -+ * -+ * Description: Device Initialization -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+static int __init -+tn7atm_init(struct atm_dev *dev) -+{ -+ Tn7AtmPrivate *priv; -+ char *ptr; -+ -+ dprintf(4, "tn7atm_init()\n"); -+ -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ -+ if(tn7sar_init(dev, priv) != 0) -+ { -+ printk("Failed to init SAR.\n"); -+ return -ENODEV; -+ } -+ -+ if(tn7dsl_init(priv) < 0) -+ { -+ printk("Failed to init DSL.\n"); -+ return -ENODEV; -+ } -+ -+ if(tn7atm_get_ESI(dev) < 0) /* set ESI */ -+ return -ENODEV; -+ -+ if(tn7atm_irq_request(dev) < 0) -+ return -EBUSY; -+ -+ priv->bTurboDsl = 1; -+ // read config for turbo dsl -+ ptr = prom_getenv("TurboDSL"); -+ if(ptr) -+ { -+ priv->bTurboDsl = os_atoi(ptr); -+ } -+ -+ return 0; -+} -+ -+int tn7atm_device_connect_status(void *priv, int state) -+{ -+ Tn7AtmPrivate *priv1; -+ -+ dprintf(5, "tn7atm_device_connect_status()\n"); -+ priv1 = (Tn7AtmPrivate *)priv; -+ -+ priv1->lConnected = state; -+ dprintf(5, "priv1->lConnected=%d\n", priv1->lConnected); -+ return 0; -+} -+ -+ -+#ifdef MODULE -+module_init (tn7atm_detect); -+module_exit (tn7atm_exit); -+#endif /* MODULE */ -diff -urN linux.old/drivers/atm/sangam_atm/tn7atm.h linux.dev/drivers/atm/sangam_atm/tn7atm.h ---- linux.old/drivers/atm/sangam_atm/tn7atm.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/tn7atm.h 2005-08-23 04:46:50.107842176 +0200 -@@ -0,0 +1,115 @@ -+/* -+ * Tnetd73xx ATM driver. -+ * by Zhicheng Tang, ztang@ti.com -+ * 2000 (c) Texas Instruments Inc. -+ * -+ * -+*/ -+ -+#ifndef __TN7ATM_H -+#define __TN7ATM_H -+ -+//#include "mips_support.h" -+#include <linux/list.h> -+ -+#define ATM_REG_OK 1 -+#define ATM_REG_FAILED 0 -+ -+#define TX_SERVICE_MAX 32 -+#define RX_SERVICE_MAX 20 -+#define TX_BUFFER_NUM 64 -+#define RX_BUFFER_NUM 28 -+#define TX_QUEUE_NUM 2 -+#define RX_BUFFER_SIZE 1582 -+ -+#define TX_DMA_CHAN 16 /* number of tx dma channels available */ -+#define MAX_DMA_CHAN 16 -+#define ATM_NO_DMA_CHAN MAX_DMA_CHAN + 1 /* no tx dma channels available */ -+#define ATM_SAR_INT 15 -+#define ATM_SAR_INT_PACING_BLOCK_NUM 2 -+#define ATM_DSL_INT 39 -+ -+#define CONFIG_ATM_TN7ATM_DEBUG 0 /* Debug level (0=no mtn7s 5=verbose) */ -+ -+#define TN7ATM_DEV(d) ((struct tn7atm*)((d)->dev_data)) -+ -+ -+/* Avalanche SAR state information */ -+ -+typedef enum tn7atm_state -+{ -+ TN7ATM_STATE_REGISTER /* device registered */ -+}tn7atm_state; -+ -+typedef struct _sar_stat -+{ -+ unsigned int txErrors; -+ unsigned int rxErrors; -+ unsigned int rxPktCnt; -+ unsigned int txPktCnt; -+ unsigned int rxBytes; -+ unsigned int txBytes; -+}sar_stat_t; -+ -+/* Host based look up table to xref Channel Id's, VPI/VCI, LC, CID, packet type */ -+typedef struct _tn7atm_tx_lut -+{ -+ int inuse; /* is DMA channel available (1=y) */ -+ int chanid; /* DMA channel ID (0-0x1f) This corresponds to the Channel ID -+ that is used in the connection config reg (TN7ATM_CONN_CONFIG) */ -+ int vpi; /* Virtual path identifier */ -+ int vci; /* Virtual channel identifier */ -+ void *vcc; -+ int bClosing; -+ int ready; -+ void *net_device; -+ int tx_total_bufs; -+ int tx_used_bufs[2]; -+ int netqueue_stop; -+}tn7atm_lut_t; -+ -+/* per device data */ -+ -+typedef struct _tn7atm_private -+{ -+ struct _tn7atm_private *next; /* next device */ -+ struct atm_dev *dev; /* ATM device */ -+ struct net_device_stats stats; /* Used to report Tx/Rx frames from ifconfig */ -+ tn7atm_lut_t lut[MAX_DMA_CHAN]; /* Tx DMA look up table (LUT) */ -+ int dsl_irq; /* ATM SAR TransmitA interrupt number */ -+ int sar_irq; /* ATM SAR ReceiveA interrupt number */ -+ char* name; /* device name */ -+ char* proc_name; /* board name under /proc/atm */ -+ unsigned int available_cell_rate; /* cell rate */ -+ unsigned int connection_cell_rate; /* cell rate */ -+ int lConnected; -+ -+ /* Tnetd73xx CPHAL */ -+ void *pSarHalDev; -+ void *pSarHalFunc; -+ void *pSarOsFunc; -+ void *halIsr; -+ int int_num; -+ -+ /* turbo dsl */ -+ int bTurboDsl; -+ -+ /* spin lock for netifqueue */ -+ spinlock_t netifqueueLock; -+ int netifqueueLockFlag; -+ int xmitStop; /* temp fix for SAR problem */ -+}tn7atm_private_t, Tn7AtmPrivate; -+ -+ -+ -+/* ATM adaptation layer id */ -+typedef enum tn7atm_aal { -+ TN7ATM_AAL0 = 0, -+ TN7ATM_AAL2 = 2, -+ TN7ATM_AAL5 = 5, -+} tn7atm_aal_t; -+ -+ -+ -+ -+#endif -diff -urN linux.old/drivers/atm/sangam_atm/tn7dsl.c linux.dev/drivers/atm/sangam_atm/tn7dsl.c ---- linux.old/drivers/atm/sangam_atm/tn7dsl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/tn7dsl.c 2005-08-23 04:46:50.109841872 +0200 -@@ -0,0 +1,1780 @@ -+/* -+ * $Id$ -+ * -+ * Avalanche SAR driver -+ * -+ * Zhicheng Tang, ztang@ti.com -+ * 2000 (c) Texas Instruments Inc. -+ * -+ * -+*/ -+#include <linux/config.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/atmdev.h> -+#include <linux/delay.h> -+#include <linux/spinlock.h> -+#include <linux/smp_lock.h> -+#include <asm/io.h> -+#include <asm/mips-boards/prom.h> -+#include <linux/proc_fs.h> -+#include <linux/string.h> -+#include <linux/ctype.h> -+#include <linux/sysctl.h> -+#include <linux/timer.h> -+#include <linux/vmalloc.h> -+#include <linux/file.h> -+#include <asm/uaccess.h> -+ -+#include "tn7atm.h" -+#include "tn7api.h" -+#include "dsl_hal_api.h" -+ -+#ifdef CONFIG_LED_MODULE -+#include <asm/ar7/ledapp.h> -+#define MOD_ADSL 1 -+#define DEF_ADSL_IDLE 1 -+#define DEF_ADSL_TRAINING 2 -+#define DEF_ADSL_SYNC 3 -+#define DEF_ADSL_ACTIVITY 4 -+ -+#define LED_NUM_1 3 -+#define LED_NUM_2 4 -+ -+led_reg_t ledreg[2]; -+ -+static int led_on; -+#endif -+ -+extern int __guDbgLevel; -+extern sar_stat_t sarStat; -+static int dslInSync = 0; -+static int bMarginThConfig; -+static int bMarginRetrainEnable; -+static char EOCVendorID[8]= {0xb5, 0x00, 0x54, 0x53, 0x54, 0x43, 0x00, 0x00}; -+ -+#define TC_SYNC 1 -+#define SYNC_TIME_DELAY 500000 -+ -+ -+#define DEV_DSLMOD 1 -+#define MAX_STR_SIZE 256 -+#define DSL_MOD_SIZE 256 -+ -+#define TRUE 1 -+#define FALSE 0 -+ -+ -+enum -+{ -+ NO_MODE, -+ MULTI_MODE, -+ T1413_MODE, -+ GDMT_MODE, -+ GLITE_MODE -+}; -+ -+ -+ -+/* a structure to store all information we need -+ for our thread */ -+typedef struct kthread_struct -+{ -+ /* private data */ -+ -+ /* Linux task structure of thread */ -+ struct task_struct *thread; -+ /* Task queue need to launch thread */ -+ struct tq_struct tq; -+ /* function to be started as thread */ -+ void (*function) (struct kthread_struct *kthread); -+ /* semaphore needed on start and creation of thread. */ -+ struct semaphore startstop_sem; -+ -+ /* public data */ -+ -+ /* queue thread is waiting on. Gets initialized by -+ init_kthread, can be used by thread itself. -+ */ -+ wait_queue_head_t queue; -+ /* flag to tell thread whether to die or not. -+ When the thread receives a signal, it must check -+ the value of terminate and call exit_kthread and terminate -+ if set. -+ */ -+ int terminate; -+ /* additional data to pass to kernel thread */ -+ void *arg; -+} kthread_t; -+ -+#ifndef ADIAG -+#define DSP_FIRMWARE_PATH "/lib/modules/ar0700xx.bin" -+#else -+#define DSP_FIRMWARE_PATH "/var/tmp/ar0700xx_diag.bin" -+#endif -+ -+/* externs */ -+extern struct atm_dev *mydev; -+extern unsigned int oamFarLBCount[4]; -+extern int dslhal_support_restoreTrainingInfo(PITIDSLHW_T pIhw); -+/* gloabal functions */ -+ -+/* end of global functions */ -+ -+/* module wide declars */ -+static PITIDSLHW_T pIhw; -+static char mod_req[16]={'\t'}; -+static volatile int bshutdown; -+static char info[MAX_STR_SIZE]; -+static DECLARE_MUTEX_LOCKED(adsl_sem_overlay); /* Used for DSL Polling enable */ -+kthread_t overlay_thread; -+/* end of module wide declars */ -+ -+/* Internal Functions */ -+static void tn7dsl_chng_modulation(void* data); -+static void tn7dsl_set_modulation(void* data); -+static int tn7dsl_reload_overlay(void); -+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp, void *buffer, size_t *lenp); -+static void tn7dsl_register_dslss_led(void); -+void tn7dsl_dslmod_sysctl_register(void); -+void tn7dsl_dslmod_sysctl_unregister(void); -+/* end of internal functions */ -+ -+ -+ -+ -+ -+/* prototypes */ -+ -+/* start new kthread (called by creator) */ -+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread); -+ -+/* stop a running thread (called by "killer") */ -+void stop_kthread(kthread_t *kthread); -+ -+/* setup thread environment (called by new thread) */ -+void init_kthread(kthread_t *kthread, char *name); -+ -+/* cleanup thread environment (called by thread upon receiving termination signal) */ -+void exit_kthread(kthread_t *kthread); -+ -+ -+ -+/* private functions */ -+static void kthread_launcher(void *data) -+{ -+ kthread_t *kthread = data; -+ kernel_thread((int (*)(void *))kthread->function, (void *)kthread, 0); -+ -+} -+ -+/* public functions */ -+ -+/* create a new kernel thread. Called by the creator. */ -+void start_kthread(void (*func)(kthread_t *), kthread_t *kthread) -+{ -+ /* initialize the semaphore: -+ we start with the semaphore locked. The new kernel -+ thread will setup its stuff and unlock it. This -+ control flow (the one that creates the thread) blocks -+ in the down operation below until the thread has reached -+ the up() operation. -+ */ -+ //init_MUTEX_LOCKED(&kthread->startstop_sem); -+ -+ /* store the function to be executed in the data passed to -+ the launcher */ -+ kthread->function=func; -+ -+ /* create the new thread my running a task through keventd */ -+ -+ /* initialize the task queue structure */ -+ kthread->tq.sync = 0; -+ INIT_LIST_HEAD(&kthread->tq.list); -+ kthread->tq.routine = kthread_launcher; -+ kthread->tq.data = kthread; -+ -+ /* and schedule it for execution */ -+ schedule_task(&kthread->tq); -+ -+ /* wait till it has reached the setup_thread routine */ -+ //down(&kthread->startstop_sem); -+ -+} -+ -+/* stop a kernel thread. Called by the removing instance */ -+void stop_kthread(kthread_t *kthread) -+{ -+ if (kthread->thread == NULL) -+ { -+ printk("stop_kthread: killing non existing thread!\n"); -+ return; -+ } -+ -+ /* this function needs to be protected with the big -+ kernel lock (lock_kernel()). The lock must be -+ grabbed before changing the terminate -+ flag and released after the down() call. */ -+ lock_kernel(); -+ -+ /* initialize the semaphore. We lock it here, the -+ leave_thread call of the thread to be terminated -+ will unlock it. As soon as we see the semaphore -+ unlocked, we know that the thread has exited. -+ */ -+ //init_MUTEX_LOCKED(&kthread->startstop_sem); -+ -+ /* We need to do a memory barrier here to be sure that -+ the flags are visible on all CPUs. -+ */ -+ mb(); -+ -+ /* set flag to request thread termination */ -+ kthread->terminate = 1; -+ -+ /* We need to do a memory barrier here to be sure that -+ the flags are visible on all CPUs. -+ */ -+ mb(); -+ kill_proc(kthread->thread->pid, SIGKILL, 1); -+ -+ /* block till thread terminated */ -+ //down(&kthread->startstop_sem); -+ -+ /* release the big kernel lock */ -+ unlock_kernel(); -+ -+ /* now we are sure the thread is in zombie state. We -+ notify keventd to clean the process up. -+ */ -+ kill_proc(2, SIGCHLD, 1); -+ -+} -+ -+/* initialize new created thread. Called by the new thread. */ -+void init_kthread(kthread_t *kthread, char *name) -+{ -+ /* lock the kernel. A new kernel thread starts without -+ the big kernel lock, regardless of the lock state -+ of the creator (the lock level is *not* inheritated) -+ */ -+ lock_kernel(); -+ -+ /* fill in thread structure */ -+ kthread->thread = current; -+ -+ /* set signal mask to what we want to respond */ -+ siginitsetinv(¤t->blocked, sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)); -+ -+ /* initialise wait queue */ -+ init_waitqueue_head(&kthread->queue); -+ -+ /* initialise termination flag */ -+ kthread->terminate = 0; -+ -+ /* set name of this process (max 15 chars + 0 !) */ -+ sprintf(current->comm, name); -+ -+ /* let others run */ -+ unlock_kernel(); -+ -+ /* tell the creator that we are ready and let him continue */ -+ //up(&kthread->startstop_sem); -+ -+} -+ -+/* cleanup of thread. Called by the exiting thread. */ -+void exit_kthread(kthread_t *kthread) -+{ -+ /* we are terminating */ -+ -+ /* lock the kernel, the exit will unlock it */ -+ lock_kernel(); -+ kthread->thread = NULL; -+ mb(); -+ -+ /* notify the stop_kthread() routine that we are terminating. */ -+ //up(&kthread->startstop_sem); -+ /* the kernel_thread that called clone() does a do_exit here. */ -+ -+ /* there is no race here between execution of the "killer" and real termination -+ of the thread (race window between up and do_exit), since both the -+ thread and the "killer" function are running with the kernel lock held. -+ The kernel lock will be freed after the thread exited, so the code -+ is really not executed anymore as soon as the unload functions gets -+ the kernel lock back. -+ The init process may not have made the cleanup of the process here, -+ but the cleanup can be done safely with the module unloaded. -+ */ -+ -+} -+ -+ -+ -+int os_atoi(const char *pStr) -+{ -+ int retVal = -1; -+ -+ if(*pStr=='-') -+ retVal = -simple_strtoul(pStr+1, (char **)NULL, 10); -+ else -+ retVal = simple_strtoul(pStr, (char **)NULL, 10); -+ return retVal ; -+} -+ -+ -+int os_atoh(const char *pStr) -+{ -+ int retVal = -1; -+ -+ if(*pStr=='-') -+ retVal = -simple_strtoul(pStr+1, (char **)NULL, 16); -+ else -+ retVal = simple_strtoul(pStr, (char **)NULL, 16); -+ return retVal ; -+} -+ -+unsigned long os_atoul(const char *pStr) -+{ -+ unsigned long retVal = -1; -+ -+ retVal = simple_strtoul(pStr, (char **)NULL, 10); -+ return retVal ; -+} -+ -+void dprintf( int uDbgLevel, char * szFmt, ...) -+{ -+#ifdef DEBUG_BUILD -+ static char buff[256]; -+ va_list ap; -+ -+ if( __guDbgLevel < uDbgLevel) -+ return; -+ -+ va_start( ap, szFmt); -+ vsprintf((char *)buff, szFmt, ap); -+ va_end(ap); -+ printk("%s", buff); -+#endif -+} -+ -+/*int strcmp(const char *s1, const char *s2) -+{ -+ -+ int i=0; -+ -+ while(s1[i] !=0) -+ { -+ if(s2[i]==0) -+ return -1; -+ if(s1[i] != s2[i]) -+ return 1; -+ i++; -+ } -+ if(s2[i] != 0) -+ return 1; -+ return 0; -+} -+*/ -+ -+int shim_osLoadFWImage(unsigned char *ptr) -+{ -+ unsigned int bytesRead; -+ mm_segment_t oldfs; -+ static struct file *filp; -+ unsigned int imageLength=0x4ffff; -+ -+ -+ dprintf(4, "tn7dsl_read_dsp()\n"); -+ -+ dprintf(4,"open file %s\n", DSP_FIRMWARE_PATH); -+ -+ filp=filp_open(DSP_FIRMWARE_PATH -+ ,00,O_RDONLY); -+ -+ if(filp ==NULL) -+ { -+ printk("Failed: Could not open DSP binary file\n"); -+ return -1; -+ } -+ -+ if (filp->f_op->read==NULL) -+ return -1; /* File(system) doesn't allow reads */ -+ -+ /* Now read bytes from postion "StartPos" */ -+ filp->f_pos = 0; -+ oldfs = get_fs(); -+ set_fs(KERNEL_DS); -+ bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos); -+ -+ dprintf(4,"file length = %d\n", bytesRead); -+ -+ set_fs(oldfs); -+ -+ /* Close the file */ -+ fput(filp); -+ -+ return bytesRead; -+} -+ -+unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength) -+{ -+ unsigned int bytesRead; -+ mm_segment_t oldfs; -+ struct file *filp; -+ -+ dprintf(4,"shim_read_overlay_page\n"); -+ //dprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength); -+ -+ filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY); -+ if(filp ==NULL) -+ { -+ printk("Failed: Could not open DSP binary file\n"); -+ return -1; -+ } -+ -+ if (filp->f_op->read==NULL) -+ return -1; /* File(system) doesn't allow reads */ -+ -+ /* Now read bytes from postion "StartPos" */ -+ -+ if(filp->f_op->llseek) -+ filp->f_op->llseek(filp,secOffset, 0); -+ oldfs = get_fs(); -+ set_fs(KERNEL_DS); -+ filp->f_pos = secOffset; -+ bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos); -+ -+ set_fs(oldfs); -+ /* Close the file */ -+ fput(filp); -+ return bytesRead; -+} -+ -+int shim_osLoadDebugFWImage(unsigned char *ptr) -+{ -+ return 0; -+} -+int shim_osStringCmp(const char *s1, const char *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+void *shim_osAllocateMemory(unsigned int size) -+{ -+ return ((void *)kmalloc(size, GFP_KERNEL)); -+} -+ -+void *shim_osAllocateDmaMemory(unsigned int size) -+{ -+ /* -+ int order; -+ -+ order=1; -+ size=size/4096; -+ while(size >= 1) -+ { -+ order++; -+ size=size/2; -+ } -+ -+ return ( (void *)__get_free_pages(GFP_ATOMIC, order)); -+ */ -+ //return ((void *)kmalloc(size, GFP_ATOMIC)); -+ //return ((void *)kmalloc(size, GFP_KERNEL)); -+ void *ptr; -+ -+ ptr = kmalloc(size, GFP_ATOMIC); -+ if(ptr==NULL) -+ { -+ printk("failed atomic\n"); -+ ptr = kmalloc(size, GFP_KERNEL); -+ if(ptr==NULL) -+ { -+ printk("failed kernel\n"); -+ ptr = kmalloc(size, GFP_KERNEL|GFP_DMA); -+ } -+ } -+ printk("size=%d\n", size); -+ return ptr; -+ -+} -+ -+ -+void shim_osFreeMemory(void *ptr, unsigned int size) -+{ -+ -+ kfree(ptr); -+} -+ -+void shim_osFreeDmaMemory(void *ptr, unsigned int size) -+{ -+/* -+ int order; -+ -+ order=1; -+ size=size/4096; -+ while(size >=1) -+ { -+ order++; -+ size=size/2; -+ } -+ free_pages(ptr, order); -+*/ -+ kfree(ptr); -+} -+ -+void *shim_osAllocateVMemory(unsigned int size) -+{ -+ -+ return ((void *)vmalloc(size)); -+} -+ -+void shim_osFreeVMemory(void *ptr, unsigned int size) -+{ -+ vfree(ptr); -+} -+ -+void shim_osMoveMemory(char *dst, char *src, unsigned int numBytes) -+{ -+ memcpy(dst, src, numBytes); -+} -+ -+void shim_osZeroMemory(char *dst, unsigned int numBytes) -+{ -+ memset(dst, 0, numBytes); -+} -+ -+void shim_osWriteBackCache(void *addr, unsigned int size) -+{ -+ unsigned int i,Size=(((unsigned int)addr)&0xf)+size; -+ -+ for (i=0;i<Size;i+=16,addr+=16) -+ { -+ __asm__(" .set mips3 "); -+ __asm__(" cache 25, (%0)" : : "r" (addr)); -+ __asm__(" .set mips0 "); -+ } -+} -+ -+void shim_osInvalidateCache(void *addr, unsigned int size) -+{ -+ unsigned int i,Size=(((unsigned int)addr)&0xf)+size; -+ -+ for (i=0;i<Size;i+=16,addr+=16) -+ { -+ __asm__(" .set mips3 "); -+ __asm__("cache 17, (%0)" : : "r" (addr)); -+ __asm__(" .set mips0 "); -+ } -+} -+ -+void shim_osClockWait(int val) -+{ -+ unsigned int chkvalue; -+ chkvalue=val/64; -+ -+ if(chkvalue > 1000) -+ { -+ mdelay(chkvalue/1000); -+ return; -+ } -+ else -+ udelay(val/64); -+} /* end of cwait() */ -+ -+unsigned int shim_osClockTick(int val) -+{ -+ return jiffies; -+} -+ -+int flags; -+spinlock_t shimLock; -+ -+void shim_osCriticalEnter(void) -+{ -+ spin_lock_irqsave(&shimLock, flags); -+ -+} -+ -+ -+void shim_osCriticalExit(void) -+{ -+ spin_unlock_irqrestore(&shimLock, flags); -+} -+ -+ -+int tn7dsl_proc_stats(char* buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ -+ int len = 0; -+ int limit = count - 80; -+ int F4count, F5count; -+ -+ -+ /* Read Ax5 Stats */ -+ dslhal_api_gatherStatistics(pIhw); -+ -+ if(len<=limit) -+ len += sprintf(buf+len, "\nAR7 DSL Modem Statistics:\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "--------------------------------\n"); -+ /* us and ds Connection Rates */ -+ if(len<=limit) -+ len += sprintf(buf+len, "[DSL Modem Stats]\n"); -+ -+ -+ if(len<=limit) -+ { -+ if(pIhw->lConnected != 1) -+ { -+ pIhw->AppData.USConRate = 0; -+ pIhw->AppData.DSConRate = 0; -+ } -+ len += sprintf(buf+len, "\tUS Connection Rate:\t%u\tDS Connection Rate:\t%u\n", -+ (unsigned int)pIhw->AppData.USConRate, -+ (unsigned int)pIhw->AppData.DSConRate ); -+ } -+ if(len<=limit) -+ len += sprintf(buf+len, "\tDS Line Attenuation:\t%u\tDS Margin:\t\t%u\n", -+ (unsigned int)pIhw->AppData.dsLineAttn/2, -+ (unsigned int)pIhw->AppData.dsMargin/2 ); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tUS Line Attenuation:\t%u\tUS Margin:\t\t%u\n", -+ (unsigned int)pIhw->AppData.usLineAttn, -+ (unsigned int)pIhw->AppData.usMargin ); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tUS Payload :\t\t%u\tDS Payload:\t\t%u\n", -+ ((unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1])*48, -+ ((unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1])*48); -+ /* Superframe Count */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\tUS Superframe Cnt :\t%u\tDS Superframe Cnt:\t%u\n", -+ (unsigned int)pIhw->AppData.usSuperFrmCnt, -+ (unsigned int)pIhw->AppData.dsSuperFrmCnt ); -+ -+ /* US and DS power */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\tUS Transmit Power :\t%u\tDS Transmit Power:\t%u\n", -+ (unsigned int)pIhw->AppData.usTxPower/256, -+ (unsigned int)pIhw->AppData.dsTxPower/256 ); -+ /* DSL Stats Errors*/ -+ if(len<=limit) -+ len += sprintf(buf+len, "\tLOS errors:\t\t%u\tSEF errors:\t\t%u\n", -+ (unsigned int)pIhw->AppData.LOS_errors, -+ (unsigned int)pIhw->AppData.SEF_errors ); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tFrame mode:\t\t%u\tMax Frame mode:\t\t%u\n", -+ (unsigned int)pIhw->AppData.FrmMode, -+ (unsigned int)pIhw->AppData.MaxFrmMode ); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tTrained Path:\t\t%u\tUS Peak Cell Rate:\t%u\n", -+ (unsigned int)pIhw->AppData.TrainedPath, -+ (unsigned int)pIhw->AppData.USConRate*1000/8/53 ); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tTrained Mode:\t\t%u\tSelected Mode:\t\t%u\n", -+ (unsigned int)pIhw->AppData.TrainedMode, (unsigned int)pIhw->AppData.StdMode ); -+ -+ if(len<=limit) -+ len += sprintf(buf+len, "\tATUC Vendor ID:\t%u\tATUC Revision:\t\t%u\n", -+ (unsigned int)pIhw->AppData.atucVendorId, pIhw->AppData.atucRevisionNum); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tHybrid Selected:\t%u\n", -+ (unsigned int)pIhw->AppData.currentHybridNum); -+ -+ /* Upstream Interleaved Errors */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Upstream (TX) Interleave path]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n", -+ (unsigned int)pIhw->AppData.usICRC_errors, -+ (unsigned int)pIhw->AppData.usIFEC_errors, -+ (unsigned int)pIhw->AppData.usINCD_error); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n", -+ (unsigned int)pIhw->AppData.usILCD_errors, -+ (unsigned int)pIhw->AppData.usIHEC_errors); -+ /* Downstream Interleaved Errors */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Downstream (RX) Interleave path]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n", -+ (unsigned int)pIhw->AppData.dsICRC_errors, -+ (unsigned int)pIhw->AppData.dsIFEC_errors, -+ (unsigned int)pIhw->AppData.dsINCD_error); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n", -+ (unsigned int)pIhw->AppData.dsILCD_errors, -+ (unsigned int)pIhw->AppData.dsIHEC_errors); -+ /* Upstream Fast Errors */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Upstream (TX) Fast path]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n", -+ (unsigned int)pIhw->AppData.usFCRC_errors, -+ (unsigned int)pIhw->AppData.usFFEC_errors, -+ (unsigned int)pIhw->AppData.usFNCD_error); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n", -+ (unsigned int)pIhw->AppData.usFLCD_errors, -+ (unsigned int)pIhw->AppData.usFHEC_errors); -+ /* Downstream Fast Errors */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Downstream (RX) Fast path]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tCRC: \t%u\tFEC: \t%u\tNCD: \t%u\n", -+ (unsigned int)pIhw->AppData.dsFCRC_errors, -+ (unsigned int)pIhw->AppData.dsFFEC_errors, -+ (unsigned int)pIhw->AppData.dsFNCD_error); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tLCD: \t%u\tHEC: \t%u\n", -+ (unsigned int)pIhw->AppData.dsFLCD_errors, -+ (unsigned int)pIhw->AppData.dsFHEC_errors); -+ /* ATM stats upstream */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n[ATM Stats]"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Upstream/TX]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\n", -+ (unsigned int)pIhw->AppData.usAtm_count[0] + (unsigned int)pIhw->AppData.usAtm_count[1], -+ (unsigned int)pIhw->AppData.usIdle_count[0] + (unsigned int)pIhw->AppData.usIdle_count[1]); -+ /* ATM stats downstream */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n\t[Downstream/RX)]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tGood Cell Cnt:\t%u\n\tIdle Cell Cnt:\t%u\n\tBad Hec Cell Cnt:\t%u\n", -+ (unsigned int)pIhw->AppData.dsGood_count[0] + (unsigned int)pIhw->AppData.dsGood_count[1], -+ (unsigned int)pIhw->AppData.dsIdle_count[0] + (unsigned int)pIhw->AppData.dsIdle_count[1], -+ (unsigned int)pIhw->AppData.dsBadHec_count[0] + (unsigned int)pIhw->AppData.dsBadHec_count[1]); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tOverflow Dropped Cell Cnt:\t%u\n", -+ (unsigned int)pIhw->AppData.dsOVFDrop_count[0] + (unsigned int)pIhw->AppData.dsOVFDrop_count[1]); -+ tn7sar_get_stats(pIhw->pOsContext); -+ if(len<=limit) -+ len += sprintf(buf+len, "\n[SAR AAL5 Stats]\n"); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tTx PDU's:\t%u\n\tRx PDU's:\t%u\n", -+ sarStat.txPktCnt, -+ sarStat.rxPktCnt); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tTx Total Bytes:\t%u\n\tRx Total Bytes:\t%u\n", -+ sarStat.txBytes, -+ sarStat.rxBytes); -+ if(len<=limit) -+ len += sprintf(buf+len, "\tTx Total Error Counts:\t%u\n\tRx Total Error Counts:\t%u\n\n", -+ sarStat.txErrors, -+ sarStat.rxErrors); -+ -+ /* oam loopback info */ -+ if(len<=limit) -+ len += sprintf(buf+len, "\n[OAM Stats]\n"); -+ -+ tn7sar_get_near_end_loopback_count(&F4count, &F5count); -+ -+ if(len<=limit) -+ { -+ len += sprintf(buf+len, "\tNear End F5 Loop Back Count:\t%u\n\tNear End F4 Loop Back Count:\t%u\n\tFar End F5 Loop Back Count:\t%u\n\tFar End F4 Loop Back Count:\t%u\n", -+ F5count, -+ F4count, -+ oamFarLBCount[0] + oamFarLBCount[2], -+ oamFarLBCount[1] + oamFarLBCount[3]); -+ } -+ return len; -+} -+ -+int -+tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ -+ int len = 0; -+ int limit = count - 80; -+ -+ char *state; -+ int tag; -+ -+ tag= dslhal_api_pollTrainingStatus(pIhw); -+ tag = pIhw->AppData.bState; -+ -+ switch(tag){ -+ case 0: state = "ACTREQ"; break; -+ case 1: state = "QUIET1"; break; -+ case 2: state = "IDLE"; break; -+ case 3: state = "INIT"; break; -+ case 4: state = "RTDL"; break; -+ case 5: state = "SHOWTIME"; break; -+ default: state = "unknown"; break; -+ } -+ -+ if(pIhw->lConnected == 1) -+ state = "SHOWTIME"; -+ if(len<=limit) -+ len += sprintf(buf+len,"%s\n",state); -+ -+ return len; -+} -+ -+ -+ -+int tn7dsl_handle_interrupt(void) -+{ -+ int intsrc; -+ unsigned char cMsgRa[6]; -+ short margin; -+ -+ dprintf(4, "tn7dsl_handle_dsl_interrupt()\n"); -+ if(pIhw) -+ { -+ intsrc=dslhal_api_acknowledgeInterrupt(pIhw); -+ dslhal_api_handleTrainingInterrupt(pIhw, intsrc); -+ -+ if(pIhw->lConnected == TC_SYNC) -+ { -+ -+ if(dslInSync == 0) -+ { -+ printk("DSL in Sync\n"); -+ tn7atm_device_connect_status(pIhw->pOsContext, 1); -+ dslhal_api_initStatistics(pIhw); -+ dslhal_api_gatherStatistics(pIhw); -+#ifdef CONFIG_LED_MODULE -+// led_operation(MOD_ADSL, DEF_ADSL_SYNC); -+ led_on = DEF_ADSL_SYNC; -+#endif -+ /* add auto margin retrain */ -+ if(pIhw->AppData.TrainedMode < 5) -+ { -+ if(bMarginRetrainEnable && bMarginThConfig == 0) -+ { -+ dslhal_support_getCMsgsRa(pIhw, cMsgRa); -+ margin = *(unsigned short *)&cMsgRa[4]; -+ margin = (margin >> 6) & 0x3f; -+ if(margin & 0x20) // highest bit is 1 -+ { -+ margin = -(margin & 0x1f); -+ } -+ -+ //printk("margin = %d, cmsg-ra = %02x %02x %02x %02x %02x %02x\n", margin, cMsgRa[0],cMsgRa[1],cMsgRa[2],cMsgRa[3],cMsgRa[4],cMsgRa[5]); -+ dslhal_api_setMarginThreshold(pIhw, margin*2); /* DSL margin is in 0.5db */ -+ } -+ } -+ -+ } -+ dslInSync = 1; -+ } -+ else -+ { -+ if(dslInSync == 1) -+ { -+ dslInSync = 0; -+ tn7atm_device_connect_status(pIhw->pOsContext, 0); -+ up(&adsl_sem_overlay); -+ printk("DSL out of syn\n"); -+ } -+#ifdef CONFIG_LED_MODULE -+ if(pIhw->AppData.bState < RSTATE_INIT) -+ { -+ if(led_on != DEF_ADSL_IDLE) -+ { -+// led_operation(MOD_ADSL, DEF_ADSL_IDLE); -+ led_on = DEF_ADSL_IDLE; -+ } -+ } -+ else -+ { -+ if(led_on != DEF_ADSL_TRAINING) -+ { -+// led_operation(MOD_ADSL, DEF_ADSL_TRAINING); -+ led_on = DEF_ADSL_TRAINING; -+ } -+ -+ } -+ -+#endif -+ -+ } -+ } -+ return 0; -+} -+ -+ -+int tn7dsl_get_dslhal_version(char *pVer) -+{ -+ dslVer ver; -+ -+ dslhal_api_getDslHalVersion(&ver); -+ -+ memcpy(pVer,&ver,8); -+ return 0; -+} -+ -+int tn7dsl_get_dsp_version(char *pVer) -+{ -+ dspVer ver; -+ dslhal_api_getDspVersion(pIhw, &ver); -+ memcpy(pVer, &ver, 9); -+ return 0; -+} -+ -+ -+static int -+tn7dsl_get_modulation(void) -+{ -+ char *ptr = NULL; -+ -+ dprintf(4, "tn7dsl_get_modulation\n"); -+ //printk("tn7dsl_get_modulation\n"); -+ ptr = prom_getenv("modulation"); -+ -+ if (!ptr) { -+ //printk("modulation is not set in adam2 env\n"); -+ //printk("Using multimode\n"); -+ return 0; -+ } -+ printk("dsl modulation = %s\n", ptr); -+ -+ tn7dsl_set_modulation(ptr); -+ -+ return 0; -+} -+ -+ -+static int tn7dsl_set_dsl(void) -+{ -+ -+ char *ptr = NULL; -+ int value; -+ int i, offset[2]={4,11},oamFeature=0; -+ char tmp[4]; -+ char dspVer[10]; -+ -+ // OAM Feature Configuration -+ dslhal_api_dspInterfaceRead(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4); -+ oamFeature |= dslhal_support_byteSwap32(0x0000000C); -+ dslhal_api_dspInterfaceWrite(pIhw,(unsigned int)pIhw->pmainAddr, 2, (unsigned int *)&offset, (unsigned char *)&oamFeature, 4); -+ -+ // modulation -+ ptr = prom_getenv("modulation"); -+ if (ptr) -+ { -+ printk("dsl modulation = %s\n", ptr); -+ tn7dsl_set_modulation(ptr); -+ } -+ -+ // margin retrain -+ ptr = NULL; -+ ptr = prom_getenv("enable_margin_retrain"); -+ if(ptr) -+ { -+ value = os_atoi(ptr); -+ if(value == 1) -+ { -+ dslhal_api_setMarginMonitorFlags(pIhw, 0, 1); -+ bMarginRetrainEnable = 1; -+ printk("enable showtime margin monitor.\n"); -+ ptr = NULL; -+ ptr = prom_getenv("margin_threshold"); -+ if(ptr) -+ { -+ value = os_atoi(ptr); -+ printk("Set margin threshold to %d x 0.5 db\n",value); -+ if(value >= 0) -+ { -+ dslhal_api_setMarginThreshold(pIhw, value); -+ bMarginThConfig=1; -+ } -+ } -+ } -+ } -+ -+ // rate adapt -+ ptr = NULL; -+ ptr = prom_getenv("enable_rate_adapt"); -+ if(ptr) -+ { -+ dslhal_api_setRateAdaptFlag(pIhw, os_atoi(ptr)); -+ } -+ -+ // trellis -+ ptr = NULL; -+ ptr = prom_getenv("enable_trellis"); -+ if(ptr) -+ { -+ dslhal_api_setTrellisFlag(pIhw, os_atoi(ptr)); -+ } -+ -+ // maximum bits per carrier -+ ptr = NULL; -+ ptr = prom_getenv("maximum_bits_per_carrier"); -+ if(ptr) -+ { -+ dslhal_api_setMaxBitsPerCarrier(pIhw, os_atoi(ptr)); -+ } -+ -+ // maximum interleave depth -+ ptr = NULL; -+ ptr = prom_getenv("maximum_interleave_depth"); -+ if(ptr) -+ { -+ dslhal_api_setMaxInterleaverDepth(pIhw, os_atoi(ptr)); -+ } -+ -+ // inner and outer pairs -+ ptr = NULL; -+ ptr = prom_getenv("pair_selection"); -+ if(ptr) -+ { -+ dslhal_api_selectInnerOuterPair(pIhw, os_atoi(ptr)); -+ } -+ -+ ptr = NULL; -+ ptr = prom_getenv("dgas_polarity"); -+ if(ptr) -+ { -+ dslhal_api_configureDgaspLpr(pIhw, 1, 1); -+ dslhal_api_configureDgaspLpr(pIhw, 0, os_atoi(ptr)); -+ } -+ -+ ptr = NULL; -+ ptr = prom_getenv("los_alarm"); -+ if(ptr) -+ { -+ dslhal_api_disableLosAlarm(pIhw, os_atoi(ptr)); -+ } -+ -+ ptr = NULL; -+ ptr = prom_getenv("eoc_vendor_id"); -+ if(ptr) -+ { -+ for(i=0;i<8;i++) -+ { -+ tmp[0]=ptr[i*2]; -+ tmp[1]=ptr[i*2+1]; -+ tmp[2]=0; -+ EOCVendorID[i] = os_atoh(tmp); -+ //printk("tmp=%s--", tmp); -+ //printk("ID[%d]=0x%02x ", i, (unsigned char)EOCVendorID[i]); -+ } -+ tn7dsl_get_dsp_version(dspVer); -+ //printk("Annex =%d\n", dspVer[8]); -+ if(dspVer[8]==2) // annex b -+ { -+ //printk("EOCVendorID=%02x %02x %02x %02x %02x %02x %02x %02x\n", EOCVendorID[0], EOCVendorID[1], EOCVendorID[2], EOCVendorID[3], -+ // EOCVendorID[4], EOCVendorID[5], EOCVendorID[6], EOCVendorID[7]); -+ dslhal_api_setEocVendorId(pIhw, EOCVendorID); -+ } -+ -+ } -+ -+ return 0; -+} -+ -+ -+ -+ -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: static void tn7dsl_init(void) -+ * -+ * Description: This function initializes -+ * Ar7 DSL interface -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+ -+int tn7dsl_init(void *priv) -+{ -+ -+ printk("Initializing DSL interface\n"); -+ -+ -+ /* start dsl */ -+ if(dslhal_api_dslStartup(&pIhw) !=0 ) -+ { -+ printk("DSL start failed.\n"); -+ return -1; -+ } -+ -+ // set dsl into overlay page reload mode -+ pIhw->bAutoRetrain = 1; -+ -+ // set default training properties -+ tn7dsl_set_dsl(); -+ -+ pIhw->pOsContext = priv; -+ -+ //start_kthread(tn7dsl_reload_overlay, &overlay_thread); -+ -+ /*register dslss LED with led module */ -+#ifdef CONFIG_LED_MODULE -+ tn7dsl_register_dslss_led(); -+#endif -+ -+ -+ return 0; /* What do we return here? */ -+} -+ -+/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -+ * -+ * Function: int avsar_exit(void) -+ * -+ * Description: Avalanche SAR exit function -+ * -+ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ -+ -+void tn7dsl_exit (void) -+{ -+ -+ bshutdown = 1; -+#ifdef CONFIG_LED_MODULE -+#ifdef DEREGISTER_LED -+ //down(&adsl_sem_overlay); -+ deregister_led_drv(LED_NUM_1); -+ deregister_led_drv(LED_NUM_2); -+#else -+// led_operation(MOD_ADSL,DEF_ADSL_IDLE); -+#endif -+#endif -+ stop_kthread(&overlay_thread); -+ dslhal_api_dslShutdown(pIhw); -+ -+} -+ -+ -+static int tn7dsl_process_oam_string(int *type, int *pvpi, int *pvci, int *pdelay) -+{ -+ int i=1; -+ int j=0; -+ int vci, vpi; -+ char tmp[16]; -+ int chan; -+ int tt; -+ -+ while(j<8) -+ { -+ tmp[j] = mod_req[i]; -+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); -+ if(tmp[j] == 0x50 || tmp[j] == 0x70) -+ break; -+ j++; -+ i++; -+ } -+ -+ tmp[j] = 0; -+ vpi = os_atoi(tmp); -+ -+ i++; -+ j=0; -+ while(j<8) -+ { -+ tmp[j] = mod_req[i]; -+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); -+ if(tmp[j] == 0x43 || tmp[j] == 0x63) -+ break; -+ -+ j++; -+ i++; -+ } -+ -+ vci = os_atoi(tmp); -+ -+ if(vci==0) // f4 oam -+ *type = 1; -+ else -+ *type = 0; -+ -+ -+ tt=5000; -+ i++; -+ j=0; -+ tmp[j] = mod_req[i]; -+ if(tmp[j]==0x44 || tmp[j]==0x64) -+ { -+ i++; -+ while(j<8) -+ { -+ tmp[j] = mod_req[i]; -+ -+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); -+ if(tmp[j] == 0x54 || tmp[j] == 0x74) -+ break; -+ -+ j++; -+ i++; -+ } -+ tt = os_atoi(tmp); -+ } -+ -+ chan = tn7atm_lut_find(vpi, vci); -+ -+ *pvci=vci; -+ *pvpi=vpi; -+ *pdelay =tt; -+ dprintf(2, "oam chan=%d, type =%d\n", chan, *type); -+ -+ return chan; -+} -+ -+static void tn7dsl_dump_memory(void) -+{ -+ unsigned int *pUi; -+ int i=1; -+ int j=0; -+ int addr, len; -+ char tmp[16]; -+ -+ -+ while(j<8) -+ { -+ tmp[j] = mod_req[i]; -+ j++; -+ i++; -+ } -+ -+ tmp[j] = 0; -+ -+ addr = os_atoh(tmp); -+ -+ printk("start dump address =0x%x\n", addr); -+ pUi = (unsigned int *)addr; -+ i++; -+ j=0; -+ while(j<8) -+ { -+ tmp[j] = mod_req[i]; -+ //printk("tmp[%d]=%c, %d\n", j, tmp[j], tmp[j]); -+ if(tmp[j] == 0x43 || tmp[j] == 0x63) -+ break; -+ -+ j++; -+ i++; -+ } -+ -+ len = os_atoi(tmp); -+ j=0; -+ for(i=0; i<len; i++) -+ { -+ if(j==0) -+ printk("0x%08x: ", (unsigned int)pUi); -+ printk("%08x ", *pUi); -+ pUi++; -+ j++; -+ if(j==4) -+ { -+ printk("\n"); -+ j=0; -+ } -+ } -+ -+} -+ -+ -+ -+static int dslmod_sysctl(ctl_table *ctl, int write, struct file * filp, -+ void *buffer, size_t *lenp) -+{ -+ char *ptr; -+ int ret, len = 0; -+ int chan; -+ int type; -+ int vpi,vci,timeout; -+ -+ if (!*lenp || (filp->f_pos && !write)) { -+ *lenp = 0; -+ return 0; -+ } -+ /* DSL MODULATION is changed */ -+ if(write) -+ { -+ ret = proc_dostring(ctl, write, filp, buffer, lenp); -+ -+ switch (ctl->ctl_name) -+ { -+ case DEV_DSLMOD: -+ ptr = strpbrk(info, " \t"); -+ strcpy(mod_req, info); -+ -+ /* parse the string to determine the action */ -+ if(mod_req[0] == 0x45 || mod_req[0] == 0x65 ) // 'e', or 'E' f5 end to end -+ { -+ chan = tn7dsl_process_oam_string(&type, &vpi, &vci, &timeout); -+ tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci, timeout); -+ } -+ else if(mod_req[0] == 0x53 || mod_req[0] == 0x73 ) // 's', or 'S' f5 seg to seg -+ { -+ chan=tn7dsl_process_oam_string(&type, &vpi, &vci,&timeout); -+ type = type | (1<<1); -+ tn7sar_oam_generation(pIhw->pOsContext, chan, type, vpi, vci,timeout); -+ } -+ //debug only. Dump memory -+ else if(mod_req[0] == 0x44 || mod_req[0] == 0x64 ) // 'd' or 'D' -+ tn7dsl_dump_memory(); -+ else -+ tn7dsl_chng_modulation(info); -+ break; -+ } -+ } -+ else -+ { -+ len += sprintf(info+len, mod_req); -+ ret = proc_dostring(ctl, write, filp, buffer, lenp); -+ } -+ return ret; -+} -+ -+ -+ctl_table dslmod_table[] = { -+ {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl}, -+ {0} -+ }; -+ -+/* Make sure that /proc/sys/dev is there */ -+ctl_table dslmod_root_table[] = { -+#ifdef CONFIG_PROC_FS -+ {CTL_DEV, "dev", NULL, 0, 0555, dslmod_table}, -+#endif /* CONFIG_PROC_FS */ -+ {0} -+ }; -+ -+static struct ctl_table_header *dslmod_sysctl_header; -+ -+void tn7dsl_dslmod_sysctl_register(void) -+{ -+ static int initialized; -+ -+ if (initialized == 1) -+ return; -+ -+ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1); -+ dslmod_root_table->child->de->owner = THIS_MODULE; -+ -+ /* set the defaults */ -+ info[0] = 0; -+ -+ initialized = 1; -+} -+ -+void tn7dsl_dslmod_sysctl_unregister(void) -+{ -+ unregister_sysctl_table(dslmod_sysctl_header); -+} -+ -+static void -+tn7dsl_set_modulation(void* data) -+{ -+ dprintf(4,"tn7dsl_set_modulation\n"); -+ -+ if(!strcmp(data, "T1413")) -+ { -+ printk("retraining in T1413 mode\n"); -+ dslhal_api_setTrainingMode(pIhw, T1413_MODE); -+ return; -+ } -+ if(!strcmp(data, "GDMT")) -+ { -+ dslhal_api_setTrainingMode(pIhw, GDMT_MODE); -+ return; -+ } -+ if(!strcmp(data, "GLITE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, GLITE_MODE); -+ return; -+ } -+ if(!strcmp(data, "MMODE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, MULTI_MODE); -+ return; -+ } -+ if(!strcmp(data, "NMODE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, NO_MODE); -+ return; -+ } -+ -+ return; -+} -+ -+ -+/* Codes added for compiling tiadiag.o for Analog Diagnostic tests */ -+#ifdef ADIAG -+ -+enum -+{ -+ HOST_ACTREQ, // Send R-ACKREQ and monitor for C-ACKx -+ HOST_QUIET, // Sit quietly doing nothing for about 60 seconds, DEFAULT STATE; R_IDLE -+ HOST_XMITBITSWAP, // Perform upstream bitswap - FOR INTERNAL USE ONLY -+ HOST_RCVBITSWAP, // Perform downstream bitswap - FOR INTERNAL USE ONLY -+ HOST_RTDLPKT, // Send a remote download packet - FOR INTERNAL USE ONLY -+ HOST_CHANGELED, // Read the LED settings and change accordingly -+ HOST_IDLE, // Sit quiet -+ HOST_REVERBTEST, // Generate REVERB for manufacturing test -+ HOST_CAGCTEST, // Set coarse receive gain for manufacturing test -+ HOST_DGASP, // send Dying Gasp messages through EOC channel -+ HOST_GHSREQ, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSMSG, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHS_SENDGALF, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSEXIT, // G.hs - FOR INTERNAL USE ONLY -+ HOST_GHSMSG1, // G.hs - FOR INTERNAL USE ONLY -+ HOST_HYBRID, // Enable/Disable automatic hybrid switch -+ HOST_RJ11SELECT, // RJ11 inner/outer pair select -+ HOST_DIGITAL_MEM, // Digital Diags: run external memory tests -+ HOST_TXREVERB, // AFE Diags: TX path Reverb -+ HOST_TXMEDLEY, // AFE Diags: TX path Medley -+ HOST_RXNOISEPOWER, // AFE Diags: RX noise power -+ HOST_ECPOWER, // AFE Diags: RX eco power -+ HOST_ALL_ADIAG, // AFE Diags: all major analog diagnostic modes. Host is responsible to initiate each diagnostic sessions -+ HOST_USER_ADIAG, // AFE Diags: Host fills in analog diagnostic input data structure as specified and requests DSP to perform measurements as specified -+ HOST_QUIT_ADIAG, // AFE Diags: Host requests DSP to quit current diagnostic session. This is used for stopping the transmit REVERB/MEDLEY -+ HOST_NO_CMD, // All others - G.hs - FOR INTERNAL USE ONLY -+ HOST_DSLSS_SHUTDOWN, // Host initiated DSLSS shutdown message -+ HOST_SET_GENERIC, // Set generic CO profile -+ HOST_UNDO_GENERIC // Set profile previous to Generic -+}; -+ -+enum -+{ -+ DSP_IDLE, // R_IDLE state entered -+ DSP_ACTMON, // R_ACTMON state entered -+ DSP_TRAIN, // R_TRAIN state entered -+ DSP_ACTIVE, // R_ACTIVE state entered -+ DSP_XMITBITSWAP, // Upstream bitswap complete - FOR INTERNAL USE ONLY -+ DSP_RCVBITSWAP, // Downstream bitswap complete - FOR INTERNAL USE ONLY -+ DSP_RTDL, // R_RTDL state entered - FOR INTERNAL USE ONLY -+ DSP_RRTDLPKT, // RTDL packet received - FOR INTERNAL USE ONLY -+ DSP_XRTDLPKT, // RTDL packet transmitted - FOR INTERNAL USE ONLY -+ DSP_ERROR, // Command rejected, wrong state for this command -+ DSP_REVERBTEST, // Manufacturing REVERB test mode entered -+ DSP_CAGCTEST, // Manufacturing receive gain test done -+ DSP_OVERLAY_START, // Notify host that page overlay has started - overlay number indicated by "tag" -+ DSP_OVERLAY_END, // Notify host that page overlay has ended - overlay number indicated by "tag" -+ DSP_CRATES1, // CRATES1 message is valid and should be copied to host memory now -+ DSP_SNR, // SNR calculations are ready and should be copied to host memory now -+ DSP_GHSMSG, // G.hs - FOR INTERNAL USE ONLY -+ DSP_RCVBITSWAP_TIMEOUT, // Acknowledge Message was not received within ~500 msec (26 Superframes). -+ DSP_ATM_TC_SYNC, // Indicates true TC sync on both the upstream and downstream. Phy layer ready for data xfer. -+ DSP_ATM_NO_TC_SYNC, // Indicates loss of sync on phy layer on either US or DS. -+ DSP_HYBRID, // DSP completed hybrid switch -+ DSP_RJ11SELECT, // DSP completed RJ11 inner/outer pair select -+ DSP_INVALID_CMD, // Manufacturing (Digital and AFE) diags: CMD received not recognized -+ DSP_TEST_PASSED, // Manufacturing diags: test passed -+ DSP_TEST_FAILED, // Manufacturing diags: test failed -+ DSP_TXREVERB, // Manufacturing AFE diags: Response to HOST_TXREVERB -+ DSP_TXMEDLEY, // Manufacturing AFE diags: Response to HOST_TXMEDLEY -+ DSP_RXNOISEPOWER, // Manufacturing AFE diags: Response to HOST_RXNOISEPOWER -+ DSP_ECPOWER, // Manufacturing AFE diags: Response to HOST_ECPOWER -+ DSP_ALL_ADIAG, // Manufacturing AFE diags: Response to HOST_ALL_ADIAG -+ DSP_USER_ADIAG, // Manufacturing AFE diags: Response to HOST_USER_ADIAG -+ DSP_QUIT_ADIAG, // Manufacturing AFE diags: Response to HOST_QUIT_ADIAG -+ DSP_DGASP // DSP Message to indicate dying gasp -+}; -+ -+static unsigned char analogNoTonesTestArray[64]= -+ { -+ 0,0,0,0,0,0,0,0, // Tones 01-08 -+ 0,0,0,0,0,0,0,0, // Tones 09-16 -+ 0,0,0,0,0,0,0,0, // Tones 17-24 -+ 0,0,0,0,0,0,0,0, // Tones 25-32 -+ 0,0,0,0,0,0,0,0, // Tones 33-40 -+ 0,0,0,0,0,0,0,0, // Tones 41-48 -+ 0,0,0,0,0,0,0,0, // Tones 49-56 -+ 0,0,0,0,0,0,0,0 // Tones 57-64 -+ }; -+ -+static unsigned char analogAllTonesTestArray[64]= -+ { -+ 1,1,1,1,1,1,1,1, // Tones 01-08 -+ 1,1,1,1,1,1,1,1, // Tones 09-16 -+ 1,1,1,1,1,1,1,1, // Tones 17-24 -+ 1,1,1,1,1,1,1,1, // Tones 25-32 -+ 1,1,1,1,1,1,1,1, // Tones 33-40 -+ 1,1,1,1,1,1,1,1, // Tones 41-48 -+ 1,1,1,1,1,1,1,1, // Tones 49-56 -+ 1,1,1,1,1,1,1,1 // Tones 57-64 -+ }; -+ -+static unsigned char analogEvenTonesTestArray[64]= -+ { -+ 0,1,0,1,0,1,0,1, // Tones 01-08 -+ 0,1,0,1,0,1,0,1, // Tones 09-16 -+ 0,1,0,1,0,1,0,1, // Tones 17-24 -+ 0,1,0,1,0,1,0,1, // Tones 25-32 -+ 0,1,0,1,0,1,0,1, // Tones 33-40 -+ 0,1,0,1,0,1,0,1, // Tones 41-48 -+ 0,1,0,1,0,1,0,1, // Tones 49-56 -+ 0,1,0,1,0,1,0,1 // Tones 57-64 -+ }; -+ -+static unsigned char analogOddTonesTestArray[64]= -+ { -+ 1,0,1,0,1,0,1,0, // Tones 01-08 -+ 1,0,1,0,1,0,1,0, // Tones 09-16 -+ 1,0,1,0,1,0,1,0, // Tones 17-24 -+ 1,0,1,0,1,0,1,0, // Tones 25-32 -+ 1,0,1,0,1,0,1,0, // Tones 33-40 -+ 1,0,1,0,1,0,1,0, // Tones 41-48 -+ 1,0,1,0,1,0,1,0, // Tones 49-56 -+ 1,0,1,0,1,0,1,0 // Tones 57-64 -+ }; -+ -+unsigned int shim_osGetCpuFrequency(void) -+{ -+ return 150; -+} -+ -+static void tn7dsl_adiag(int Test, unsigned char *missingTones) -+{ -+ int rc,cmd, tag; -+ -+ rc = dslhal_diags_anlg_setMissingTones(pIhw,missingTones); -+ if(rc) -+ { -+ printk(" failed to set Missing town\n"); -+ return; -+ } -+ -+/*********** Start the actual test **********************/ -+ -+ if(Test==0) -+ { -+ printk("TX REVERB Test\n"); -+ rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXREVERB, 0, 0, 0); -+ if (rc) -+ { -+ printk("HOST_TXREVERB failed\n"); -+ return; -+ } -+ -+ } -+ if(Test==1) -+ { -+ dprintf(0,"TX MEDLEY Test\n"); -+ rc = dslhal_support_writeHostMailbox(pIhw, HOST_TXMEDLEY, 0, 0, 0); -+ if (rc) -+ return; -+ } -+ dprintf(4,"dslhal_diags_anlg_testA() done\n"); -+ return; -+} -+ -+ -+static void tn7dsl_diagnostic_test(char *data) -+{ -+ if(!strcmp(data, "ADIAGRALL")) -+ { -+ printk("TX Reverb All tone\n"); -+ tn7dsl_adiag(0,analogAllTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGRNONE")) -+ { -+ printk("TX Reverb No tone\n"); -+ tn7dsl_adiag(0,analogNoTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGREVEN")) -+ { -+ printk("TX Reverb Even tone\n"); -+ tn7dsl_adiag(0,analogEvenTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGRODD")) -+ { -+ printk("TX Reverb Odd tone\n"); -+ tn7dsl_adiag(0,analogOddTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGMALL")) -+ { -+ printk("TX Mdelay All tone\n"); -+ tn7dsl_adiag(1,analogAllTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGMNONE")) -+ { -+ printk("TX Mdelay No tone\n"); -+ tn7dsl_adiag(1,analogNoTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGMEVEN")) -+ { -+ printk("TX Mdelay Even tone\n"); -+ tn7dsl_adiag(1,analogEvenTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGMODD")) -+ { -+ printk("TX Mdelay Odd tone\n"); -+ tn7dsl_adiag(1,analogOddTonesTestArray); -+ return; -+ } -+ if(!strcmp(data, "ADIAGQUIET")) -+ { -+ dslhal_api_sendIdle(pIhw); -+ return; -+ } -+ if(!strncmp(data, "ADIAGRN", 7)) -+ { -+ char tones[64], tmp[4]; -+ int nth, i; -+ -+ tmp[0]=data[7]; -+ tmp[1]=data[8]; -+ tmp[2]=data[9]; -+ -+ nth = os_atoi(tmp); -+ -+ for(i=0;i<64;i++) -+ { -+ if(((i+1)% nth)==0) -+ { -+ tones[i]=0; -+ } -+ else -+ { -+ tones[i]=1; -+ } -+ } -+ printk("TX Reverb with %dth tones missing.\n", nth); -+ tn7dsl_adiag(0,tones); -+ return; -+ } -+ if(!strncmp(data, "ADIAGMN", 7)) -+ { -+ char tones[64], tmp[4]; -+ int nth, i; -+ -+ tmp[0]=data[7]; -+ tmp[1]=data[8]; -+ tmp[2]=data[9]; -+ nth = os_atoi(tmp); -+ -+ for(i=0;i<64;i++) -+ { -+ if(((i+1)% nth)==0) -+ { -+ tones[i]=0; -+ } -+ else -+ { -+ tones[i]=1; -+ } -+ } -+ printk("TX Mdelay with %dth tones missing.\n", nth); -+ tn7dsl_adiag(1,tones); -+ return; -+ } -+ -+ -+} -+ -+#endif -+ -+static void -+tn7dsl_chng_modulation(void* data) -+{ -+ //printk("DSL Modem Retraining\n"); -+ -+ if(!strcmp(data, "T1413")) -+ { -+ printk("retraining in T1413 mode\n"); -+ dslhal_api_setTrainingMode(pIhw, T1413_MODE); -+ dslhal_api_sendQuiet(pIhw); -+ return; -+ } -+ if(!strcmp(data, "GDMT")) -+ { -+ dslhal_api_setTrainingMode(pIhw, GDMT_MODE); -+ dslhal_api_sendQuiet(pIhw); -+ return; -+ } -+ if(!strcmp(data, "GLITE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, GLITE_MODE); -+ dslhal_api_sendQuiet(pIhw); -+ return; -+ } -+ if(!strcmp(data, "MMODE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, MULTI_MODE); -+ dslhal_api_sendQuiet(pIhw); -+ return; -+ } -+ if(!strcmp(data, "NMODE")) -+ { -+ dslhal_api_setTrainingMode(pIhw, NO_MODE); -+ dslhal_api_sendQuiet(pIhw); -+ return; -+ } -+ -+#ifdef ADIAG -+ tn7dsl_diagnostic_test(data); -+#endif -+ -+ -+ return; -+} -+ -+#ifdef CONFIG_LED_MODULE -+static void tn7dsl_led_on(unsigned long parm) -+{ -+ dslhal_api_configureLed(pIhw,parm, 0); -+} -+ -+ -+static void tn7dsl_led_off(unsigned long parm) -+{ -+ dslhal_api_configureLed(pIhw,parm, 1); -+} -+ -+static void tn7dsl_led_init(unsigned long parm) -+{ -+ dslhal_api_configureLed(pIhw,parm, 2); -+} -+#endif -+ -+static void tn7dsl_register_dslss_led(void) -+{ -+#ifdef CONFIG_LED_MODULE -+ -+ // register led0 with led module -+ ledreg[0].param = 0; -+ ledreg[0].init = (void *)tn7dsl_led_init; -+ ledreg[0].onfunc = (void *)tn7dsl_led_on; -+ ledreg[0].offfunc = (void *)tn7dsl_led_off; -+ register_led_drv(LED_NUM_1, &ledreg[0]); -+ -+ // register led1 output with led module -+ ledreg[1].param = 1; -+ ledreg[1].init = (void *)tn7dsl_led_init; -+ ledreg[1].onfunc = (void *)tn7dsl_led_on; -+ ledreg[1].offfunc = (void *)tn7dsl_led_off; -+ register_led_drv(LED_NUM_2, &ledreg[1]); -+#endif -+} -+ -+static int tn7dsl_reload_overlay(void) -+{ -+ int overlayFlag; -+ spinlock_t overlayLock; -+ -+ init_kthread(&overlay_thread, "adsl"); -+ down(&adsl_sem_overlay); -+ while(1) -+ { -+ mdelay(500); -+ if(pIhw->lConnected == 0) -+ { -+ spin_lock_irqsave(&overlayLock, overlayFlag); -+ dslhal_support_restoreTrainingInfo(pIhw); -+ spin_unlock_irqrestore(&overlayLock, overlayFlag); -+ } -+ down(&adsl_sem_overlay); -+ } -+ return 0; -+} -+ -+ -+ -+ -diff -urN linux.old/drivers/atm/sangam_atm/tn7sar.c linux.dev/drivers/atm/sangam_atm/tn7sar.c ---- linux.old/drivers/atm/sangam_atm/tn7sar.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/tn7sar.c 2005-08-23 04:46:50.110841720 +0200 -@@ -0,0 +1,1376 @@ -+/****************************************************************************** -+ * FILE PURPOSE: OS files for CPSAR -+ ****************************************************************************** -+ * FILE NAME: tn7sar.c -+ * -+ * DESCRIPTION: This file contains source for required os files for CPSAR -+ * -+ * (C) Copyright 2002, Texas Instruments Inc -+ * -+ * -+ * Revision History: -+ * 0/11/02 Zhicheng Tang, created. -+ * -+ *******************************************************************************/ -+ -+#include <linux/config.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/atmdev.h> -+#include <linux/delay.h> -+#include <linux/spinlock.h> -+#include <linux/smp_lock.h> -+#include <asm/io.h> -+#include <asm/mips-boards/prom.h> -+#include <linux/proc_fs.h> -+#include <linux/string.h> -+#include <linux/ctype.h> -+ -+ -+#define _CPHAL_AAL5 -+#define _CPHAL_SAR -+#define _CPHAL_HAL -+typedef void OS_PRIVATE; -+typedef void OS_DEVICE; -+typedef void OS_SENDINFO; -+typedef void OS_RECEIVEINFO; -+typedef void OS_SETUP; -+ -+#include "cpswhal_cpsar.h" -+#include "tn7atm.h" -+#include "tn7api.h" -+ -+ -+/* PDSP Firmware files */ -+#include "tnetd7300_sar_firm.h" -+ -+ -+enum -+{ -+ PACKET_TYPE_AAL5, -+ PACKET_TYPE_NULL, -+ PACKET_TYPE_OAM, -+ PACKET_TYPE_TRANS, -+ PACKET_TYPE_AAL2 -+}PACKET_TYPE; -+ -+enum -+{ -+ OAM_PING_FAILED, -+ OAM_PING_SUCCESS, -+ OAM_PING_PENDING, -+ OAM_PING_NOT_STARTED -+}OAM_PING; -+ -+/* PDSP OAM General Purpose Registers (@todo: These need to be used in the HAL!) */ -+ -+#define SAR_PDSP_HOST_OAM_CONFIG_REG_ADDR 0xa3000020 -+#define SAR_PDSP_OAM_CORR_REG_ADDR 0xa3000024 -+#define SAR_PDSP_OAM_LB_RESULT_REG_ADDR 0xa3000028 -+#define SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR 0xa300002c -+#define SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR 0xa3000030 -+ -+#define SAR_FREQUNCY 50000000 -+ -+#define AAL5_PARM "id=aal5, base = 0x03000000, offset = 0, int_line=15, ch0=[RxBufSize=1522; RxNumBuffers = 32; RxServiceMax = 50; TxServiceMax=50; TxNumBuffers=32; CpcsUU=0x5aa5; TxVc_CellRate=0x3000; TxVc_AtmHeader=0x00000640]" -+#define SAR_PARM "id=sar,base = 0x03000000, reset_bit = 9, offset = 0; UniNni = 0, PdspEnable = 1" -+#define RESET_PARM "id=ResetControl, base=0xA8611600" -+#define CH0_PARM "RxBufSize=1522, RxNumBuffers = 32, RxServiceMax = 50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640" -+ -+#define MAX_PVC_TABLE_ENTRY 16 -+ -+sar_stat_t sarStat; -+ -+typedef struct _channel_parm -+{ -+ unsigned int RxBufSize; -+ unsigned int RxNumBuffers; -+ unsigned int RxServiceMax; -+ unsigned int TxServiceMax; -+ unsigned int TxNumBuffers; -+ unsigned int CpcsUU; -+ unsigned int TxVc_CellRate; -+ unsigned int TxVc_AtmHeader; -+}channel_parm_t; -+ -+typedef struct _aal5_parm -+{ -+ unsigned int base; -+ unsigned int offset; -+ unsigned int int_line; -+ channel_parm_t chan[8]; -+}aal5_parm_t; -+ -+ -+typedef struct _sar_parm -+{ -+ unsigned int base; -+ unsigned int reset_bit; -+ unsigned int offset; -+ unsigned int UniNni; -+}sar_parm_t; -+ -+typedef struct _pvc_table -+{ -+ int bInUse; -+ int vpi; -+ int vci; -+}pvc_table; -+ -+static aal5_parm_t aal5Parm; -+static sar_parm_t sarParm; -+static char *pAal5, *pSar, *pReset; -+static int oam_type; -+static unsigned int oamPingStatus; -+static int oamAtmHdr; -+static int oamLbTimeout; -+static char parm_data[1024]; -+static char aal5Data[1024]; -+static char sarData[1024]; -+static char resetData[256]; -+static pvc_table pvc_result[MAX_PVC_TABLE_ENTRY]; -+ -+/* external function */ -+extern int __guDbgLevel; -+ -+/* gloabal function */ -+unsigned int oamFarLBCount[4]; -+/* end of gloabal function */ -+ -+/* internal APIs */ -+static int tn7sar_atm_header(int vpi, int vci); -+static void tn7sar_record_pvc(int atmheader); -+ -+/*end of internal APIs */ -+spinlock_t sar_lock; -+ -+/* HAL OS support functions */ -+ -+ -+unsigned long tn7sar_strtoul(const char *str, char **endptr, int base) -+{ -+ unsigned long ret; -+ -+ ret= simple_strtoul(str, endptr, base); -+ return ret; -+} -+ -+static void *tn7sar_malloc(unsigned int size) -+{ -+ return(kmalloc(size, GFP_KERNEL)); -+} -+ -+static unsigned long lockflags; -+static void tn7sar_critical_on(void) -+{ -+ spin_lock_irqsave(&sar_lock,lockflags); -+} -+ -+static void tn7sar_critical_off(void) -+{ -+ spin_unlock_irqrestore(&sar_lock,lockflags); -+} -+ -+static void tn7sar_data_invalidate(void *pmem, int size) -+{ -+ unsigned int i,Size=(((unsigned int)pmem)&0xf)+size; -+ -+ for (i=0;i<Size;i+=16,pmem+=16) -+ { -+ __asm__(" .set mips3 "); -+ __asm__("cache 17, (%0)" : : "r" (pmem)); -+ __asm__(" .set mips0 "); -+ } -+ -+} -+ -+static void tn7sar_data_writeback(void *pmem, int size) -+{ -+ unsigned int i,Size=(((unsigned int)pmem)&0xf)+size; -+ -+ for (i=0;i<Size;i+=16,pmem+=16) -+ { -+ __asm__(" .set mips3 "); -+ __asm__(" cache 25, (%0)" : : "r" (pmem)); -+ __asm__(" .set mips0 "); -+ } -+} -+ -+ -+static int -+tn7sar_find_device(int unit, const char *find_name, void *device_info) -+{ -+ int ret_val = 0; -+ char **ptr; -+ -+ ptr = (char **)device_info; -+ dprintf(3,"tn7sar_find_device\n"); -+ if(strcmp(find_name, "aal5")==0) -+ { -+ //dprintf(4,"pAal5=%s\n", pAal5); -+ *ptr = pAal5; -+ } -+ else if(strcmp(find_name, "sar")==0) -+ { -+ dprintf(3, "pSar=%s\n", pSar); -+ *ptr = pSar; -+ } -+ else if(strcmp(find_name, "reset")==0) -+ { -+ dprintf(3, "pReset=%s\n", pReset); -+ *ptr = pReset; -+ } -+ -+ device_info = NULL; -+ -+ return(ret_val); -+} -+ -+static int -+tn7sar_get_device_parm_uint(void *dev_info, const char *param, unsigned int *value) -+{ -+ char *dev_str; -+ char *pMatch; -+ int i=0, j=0; -+ char val_str[64]; -+ unsigned int val; -+ int base = 10; -+ -+ dprintf(6, "tn7sar_get_device_parm_uint()\n"); -+ -+ dev_str = (char *)dev_info; -+ dprintf(3, "parm=%s\n", param); -+ pMatch = strstr(dev_str, param); -+ //dprintf(4, "pMatch=%s\n", pMatch); -+ if(pMatch) -+ { -+ //get "=" position -+ while(pMatch[i] != 0x3d) -+ { -+ i++; -+ } -+ i++; -+ // get rid of spaces -+ while(pMatch[i]==0x20) -+ { -+ i++; -+ } -+ //get rid of 0x -+ if(pMatch[i]==0x30) -+ { -+ if(pMatch[i+1] == 0x58 || pMatch[i+1] == 0x78) -+ { -+ i+=2; -+ base = 16; -+ } -+ } -+ -+ // get next delineator -+ while(pMatch[i] != 0x2c && pMatch[i] != 0x0) -+ { -+ val_str[j]=pMatch[i]; -+ j++; -+ i++; -+ } -+ val_str[j]=0; -+ //dprintf(4, "val_str=\n%s\n", val_str); -+ //xdump(val_str, strlen(val_str) + 1, 4); -+ val = simple_strtoul(val_str, (char **)NULL, base); -+ dprintf(4, "val =%d\n", val); -+ *value = val; -+ return 0; -+ } -+ -+ -+ dprintf(3, "match not found.\n"); -+ if(strcmp(dev_str, "debug")==0) -+ { -+ dprintf(6,"debug..\n"); -+ *value = 6; -+ return 0; -+ } -+ return (1); -+} -+ -+static int tn7sar_get_device_parm_value(void *dev_info, const char *param, void *value) -+{ -+ char *dev_str; -+ char *pMatch; -+ int i=0, j=0; -+ char *pVal; -+ -+ -+ dprintf(3, "tn7sar_get_device_parm_value().\n"); -+ -+ pVal = (char *) parm_data; -+ dev_str = (char *)dev_info; -+ dprintf(3, "dev_info: \n%s\n", dev_str); -+ dprintf(3, "param=%s\n", param); -+ if(strcmp(param, "Ch0")==0) -+ { -+ *(char **)value = CH0_PARM; -+ dprintf(3, "value =%s\n", *(char **)value); -+ return 0; -+ } -+ -+ pMatch = strstr(dev_str, param); -+ if(pMatch) -+ { -+ //get "=" position -+ while(pMatch[i] != 0x3d) -+ { -+ i++; -+ } -+ i++; -+ // get rid of spaces -+ while(pMatch[i]==0x20) -+ { -+ i++; -+ } -+ -+ if(pMatch[i] != 0x5b) //"[" -+ { -+ // get next delineator -+ while(pMatch[i] != 0x2c && pMatch[i] != 0x0) -+ { -+ pVal[j] = pMatch[i]; -+ j++; -+ i++; -+ } -+ pVal[j]=0; -+ -+ *(char **)value = pVal; -+ return 0; -+ } -+ else -+ { -+ i++; //skip "[" -+ while(pMatch[i] != 0x5d) -+ { -+ if(pMatch[i] == 0x3b) //";" -+ pVal[j] = 0x2c; -+ else -+ pVal[j] = pMatch[i]; -+ j++; -+ i++; -+ } -+ pVal[j] = 0; -+ *(char **)value = pVal; -+ return 0; -+ } -+ -+ } -+ -+ return (1); -+} -+ -+static void tn7sar_free(void *pmem) -+{ -+ kfree(pmem); -+} -+ -+static void -+tn7sar_free_buffer(OS_RECEIVEINFO *os_receive_info, void *pmem) -+{ -+ tn7atm_free_rx_skb(os_receive_info); -+} -+ -+static void tn7sar_free_dev(void *pmem) -+{ -+ kfree(pmem); -+} -+ -+static void tn7sar_free_dma_xfer(void *pmem) -+{ -+ kfree(pmem); -+} -+ -+ -+static int -+tn7sar_control(void *dev_info, const char *key, const char *action, void *value) -+{ -+ int ret_val = -1; -+ -+ if (strcmp(key, "Firmware") == 0) -+ { -+ if (strcmp(action, "Get") == 0) -+ { -+ *(int **)value = &SarPdspFirmware[0]; -+ } -+ ret_val=0; -+ } -+ -+ if (strcmp(key, "FirmwareSize") == 0) -+ { -+ if (strcmp(action, "Get") == 0) -+ { -+ *(int *)value = sizeof(SarPdspFirmware); -+ } -+ ret_val=0; -+ } -+ -+ if (strcmp(key, "OamLbResult") == 0) -+ { -+ dprintf(2, "get looback source call back\n"); -+ if (strcmp(action, "Set") == 0) -+ { -+ dprintf(2, "oam result = %d\n", *(unsigned int *)value); -+ oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + *(unsigned int *)value; -+ if(oamPingStatus == OAM_PING_PENDING) -+ { -+ oamPingStatus = *(unsigned int *)value; -+ if(oamPingStatus == OAM_PING_SUCCESS) -+ { -+ /* record pvc */ -+ tn7sar_record_pvc(oamAtmHdr); -+ } -+ } -+ -+ } -+ ret_val=0; -+ } -+ -+ if (strcmp(key, "SarFreq") == 0) -+ { -+ if (strcmp(action, "Get") == 0) -+ { -+ *(int *)value = SAR_FREQUNCY; -+ } -+ ret_val=0; -+ } -+ return(ret_val); -+} -+ -+ -+static void -+tn7sar_sarhal_isr_register(OS_DEVICE *os_dev, int(*hal_isr)(HAL_DEVICE *, int *), int interrupt_num) -+{ -+ tn7atm_sarhal_isr_register(os_dev, hal_isr, interrupt_num); -+} -+ -+static void -+tn7sar_isr_unregister(OS_DEVICE *os_dev, int interrupt_num) -+{ -+ /* TODO */ -+} -+ -+ -+static void * -+tn7sar_malloc_rxbuffer(unsigned int size, void *mem_base, unsigned int mem_range, HAL_DEVICE *hal_dev, -+ HAL_RECEIVEINFO *hal_info, OS_RECEIVEINFO **os_receive_info, OS_DEVICE *os_dev) -+{ -+ return tn7atm_allocate_rx_skb(os_dev, os_receive_info, size); -+} -+ -+static void * -+tn7sar_malloc_dev(unsigned int size) -+{ -+ return(kmalloc(size, GFP_KERNEL)); -+} -+ -+static void * -+tn7sar_malloc_dma_xfer(unsigned int size, void *mem_base, unsigned int mem_range) -+{ -+ dprintf(4, "tn7sar_malloc_dma_xfer, size =%d\n", size); -+ -+ return (kmalloc(size, GFP_DMA |GFP_KERNEL)); -+ -+} -+ -+static void * -+tn7sar_memset(void *dst, int set_char, size_t count) -+{ -+ return (memset(dst, set_char, count)); -+} -+ -+static int tn7sar_printf(const char *format, ...) -+{ -+ /* TODO: add debug levels */ -+ static char buff[256]; -+ va_list ap; -+ -+ va_start( ap, format); -+ vsprintf((char *)buff, format, ap); -+ va_end(ap); -+ -+ printk("SAR HAL: %s\n", buff); -+ return(0); -+} -+ -+static void tn7sar_record_pvc(int atmheader) -+{ -+ int vci,vpi; -+ int i; -+ -+ vci = 0xffff & (atmheader >> 4); -+ vpi = 0xff & (atmheader >> 20); -+ for(i=0;i<MAX_PVC_TABLE_ENTRY;i++) -+ { -+ if(pvc_result[i].bInUse) -+ { -+ if(pvc_result[i].vpi == vpi && pvc_result[i].vci == vci) -+ { -+ return; -+ } -+ } -+ } -+ for(i=0;i<MAX_PVC_TABLE_ENTRY;i++) -+ { -+ if(pvc_result[i].bInUse == 0) -+ { -+ pvc_result[i].bInUse = 1; -+ pvc_result[i].vpi = vpi; -+ pvc_result[i].vci = vci; -+ return; -+ } -+ } -+ return; -+} -+ -+static void tn7sar_clear_pvc_table(void) -+{ -+ int i; -+ -+ for(i=0;i<MAX_PVC_TABLE_ENTRY; i++) -+ { -+ pvc_result[i].bInUse = 0; -+ pvc_result[i].vpi = 0; -+ pvc_result[i].vci = 0; -+ } -+} -+ -+int tn7sar_process_unmatched_oam(FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, unsigned int mode) -+{ -+ -+ FRAGLIST *local_list; -+ int i; -+ unsigned int atmHdr; -+ -+ local_list = frag_list; -+ -+ for(i=0;i<(int)frag_count;i++) -+ { -+ tn7sar_data_invalidate(local_list->data, (int)local_list->len); -+ local_list ++; -+ } -+ local_list = frag_list; -+ if((mode>>31)) /*vci, vpi is attached */ -+ { -+ atmHdr = *(unsigned int *)frag_list->data; -+ tn7sar_record_pvc(atmHdr); -+ if(atmHdr & 0x8) //oam cell -+ { -+ atmHdr &= 0xfffffff0; -+ if(atmHdr == oamAtmHdr) -+ { -+ if(oamPingStatus == OAM_PING_PENDING) -+ { -+ oamPingStatus = OAM_PING_SUCCESS; -+ oamFarLBCount[oam_type] = oamFarLBCount[oam_type] + 1; -+ } -+ return 0; -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+ -+static int -+tn7sar_receive(OS_DEVICE *os_dev,FRAGLIST *frag_list, unsigned int frag_count, unsigned int packet_size, -+ HAL_RECEIVEINFO *hal_receive_info, unsigned int mode) -+{ -+ int ch; -+ struct atm_dev *dev; -+ Tn7AtmPrivate *priv; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ int bRet; -+ -+ -+ dprintf(4, "tn7sar_receive\n"); -+ -+ dev = (struct atm_dev *)os_dev; -+ priv= (Tn7AtmPrivate *)dev->dev_data; -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ -+ /* Mode contains channel info */ -+ ch = (mode & 0xFF); -+ -+ if(ch == 15) -+ { -+ tn7sar_process_unmatched_oam(frag_list, frag_count, packet_size, mode); -+ pHalFunc->RxReturn(hal_receive_info, 0); -+ return 0; -+ } -+ -+ if(frag_count > 1 || frag_list->len == 0) -+ { -+ printk("Packet fragment count > 1, not handdle.\n"); -+ return 1; -+ } -+ -+ tn7sar_data_invalidate(frag_list->data, (int)frag_list->len); -+ bRet=tn7atm_receive(os_dev, ch, packet_size, frag_list->OsInfo, frag_list->data); -+ -+ if(bRet==0) -+ { -+ sarStat.rxPktCnt++; -+ sarStat.rxBytes += packet_size; -+ pHalFunc->RxReturn(hal_receive_info, 1); -+ } -+ else -+ { -+ pHalFunc->RxReturn(hal_receive_info, 0); -+ } -+ -+ return bRet; -+} -+ -+static int -+tn7sar_send_complete(OS_SENDINFO *osSendInfo) -+{ -+ return (tn7atm_send_complete(osSendInfo)); -+} -+ -+void -+tn7sar_teardown_complete(OS_DEVICE *OsDev, int ch, int Dir) -+{ -+ return; -+} -+ -+ -+/* -+unsigned int tn7sar_virt(unsigned int address) -+{ -+ return phys_to_virt(address); -+} -+*/ -+ -+int tn7sar_init_module(OS_FUNCTIONS *os_funcs) -+{ -+ dprintf(4, "tn7sar_init_module\n"); -+ if( os_funcs == 0 ) -+ { -+ return(-1); -+ } -+ os_funcs->Control = tn7sar_control; -+ os_funcs->CriticalOn = tn7sar_critical_on; -+ os_funcs->CriticalOff = tn7sar_critical_off; -+ os_funcs->DataCacheHitInvalidate = tn7sar_data_invalidate; -+ os_funcs->DataCacheHitWriteback = tn7sar_data_writeback; -+ os_funcs->DeviceFindInfo = tn7sar_find_device; -+ os_funcs->DeviceFindParmUint = tn7sar_get_device_parm_uint; -+ os_funcs->DeviceFindParmValue = tn7sar_get_device_parm_value; -+ os_funcs->Free = tn7sar_free; -+ os_funcs->FreeRxBuffer = tn7sar_free_buffer; -+ os_funcs->FreeDev = tn7sar_free_dev; -+ os_funcs->FreeDmaXfer = tn7sar_free_dma_xfer; -+ os_funcs->IsrRegister = tn7sar_sarhal_isr_register; -+ os_funcs->IsrUnRegister = tn7sar_isr_unregister; -+ os_funcs->Malloc = tn7sar_malloc; -+ os_funcs->MallocRxBuffer = tn7sar_malloc_rxbuffer; -+ os_funcs->MallocDev = tn7sar_malloc_dev; -+ os_funcs->MallocDmaXfer = tn7sar_malloc_dma_xfer; -+ os_funcs->Memset = tn7sar_memset; -+ os_funcs->Printf = tn7sar_printf; -+ os_funcs->Receive = tn7sar_receive; -+ os_funcs->SendComplete = tn7sar_send_complete; -+ os_funcs->Strcmpi = strcmp; -+ os_funcs->Sprintf = sprintf; -+ os_funcs->Strlen = strlen; -+ os_funcs->Strstr = strstr; -+ os_funcs->Strtoul = tn7sar_strtoul; -+ os_funcs->TeardownComplete = tn7sar_teardown_complete; -+ -+ return(0); -+} -+ -+ -+static void tn7sar_init_dev_parm(void) -+{ -+ int i; -+ -+ -+ /* aal5 */ -+ //strcpy(aal5Parm.id, "aal5"); -+ aal5Parm.base = 0x03000000; -+ aal5Parm.offset = 0; -+ aal5Parm.int_line=15; -+ aal5Parm.chan[0].RxBufSize=1600; -+ aal5Parm.chan[0].RxNumBuffers = 32; -+ aal5Parm.chan[0].RxServiceMax = 50; -+ aal5Parm.chan[0].TxServiceMax=50; -+ aal5Parm.chan[0].TxNumBuffers=32; -+ aal5Parm.chan[0].CpcsUU=0x5aa5; -+ aal5Parm.chan[0].TxVc_CellRate=0x3000; -+ aal5Parm.chan[0].TxVc_AtmHeader=0x00000640; -+ for(i=1;i<8;i++) -+ { -+ memcpy(&aal5Parm.chan[i], &aal5Parm.chan[0], sizeof(aal5Parm.chan[0])); -+ } -+ -+ -+ /* sar */ -+ //strcpy(sarParm.id, "sar"); -+ sarParm.base = 0x03000000; -+ sarParm.reset_bit = 9; -+ sarParm.offset = 0; -+ sarParm.UniNni = 0; -+ -+ pAal5 = aal5Data; -+ pSar = sarData; -+ pReset = resetData; -+ strcpy(pAal5, AAL5_PARM); -+ strcpy(pSar, SAR_PARM); -+ strcpy(pReset, RESET_PARM); -+ -+} -+ -+ -+int tn7sar_get_stats(void *priv1) -+{ -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ Tn7AtmPrivate *priv; -+ int i, j; -+ unsigned int *pSarStat, *pStateBase; -+ char statString[64]; -+ int len; -+ -+ dprintf(2, "tn7sar_get_stats\n"); -+ -+ priv = (Tn7AtmPrivate *)priv1; -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ //memset(&sarStat, 0, sizeof(sarStat)); -+ sarStat.txErrors = 0; -+ sarStat.rxErrors = 0; -+ for(i=0;i<MAX_DMA_CHAN;i++) -+ { -+ if(priv->lut[i].inuse) -+ { -+ for(j=0;j<1;j++) -+ { -+ len=sprintf(statString, "Stats;0;%d", priv->lut[i].chanid); -+ statString[len]=0; -+ dprintf(2, "statString=%s\n",statString); -+ pHalFunc->Control(pHalDev, statString, "Get", &pSarStat); -+ pStateBase = pSarStat; -+ while(pSarStat) -+ { -+ if((char *)*pSarStat == NULL) -+ break; -+ dprintf(2, "%s\n", (char *) *pSarStat); -+ pSarStat++; -+ dprintf(2, "%s\n", (char *) *pSarStat); -+ sarStat.rxErrors += os_atoul((char *) *pSarStat); -+ pSarStat++; -+ } -+ -+ kfree(pStateBase); -+ } -+ } -+ } -+ return 0; -+} -+ -+int tn7sar_setup_oam_channel(Tn7AtmPrivate *priv) -+{ -+ -+ CHANNEL_INFO chInfo; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ int chan=15; -+ dprintf(4, "tn7sar_setup_oam_channel\n"); -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ memset(&chInfo, 0xff, sizeof(chInfo)); -+ -+ /* channel specific */ -+ chInfo.Channel = 15; /* hardcoded for last channel */ -+ chInfo.Direction = 0; -+ chInfo.Vci = 30; /* just need below 32 */ -+ chInfo.Vpi = 0; -+ chInfo.TxVc_QosType = 2; -+ -+ /*default */ -+ chInfo.PktType = PACKET_TYPE_TRANS; -+ chInfo.TxServiceMax = 2; -+ chInfo.RxServiceMax = 2; -+ chInfo.TxNumQueues = 1; -+ chInfo.TxNumBuffers = 4; -+ chInfo.RxNumBuffers = 4; -+ chInfo.RxBufSize = 256; -+ chInfo.RxVc_OamToHost = 0; -+ chInfo.RxVp_OamToHost = 0; -+ chInfo.FwdUnkVc = 1; //enable forwarding of unknown vc -+ chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci); -+ chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, chInfo.Vci); -+ chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0); -+ chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)chInfo.Vpi, 0); -+ -+ dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader); -+ -+ if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL)) -+ { -+ printk("failed to setup channel =%d.\n", chan); -+ return -1; -+ } -+ -+ // claiming the channel -+ priv->lut[chan].vpi = 0; -+ priv->lut[chan].vci = 30; -+ priv->lut[chan].chanid = chan; -+ priv->lut[chan].inuse = 1; -+ return 0; -+} -+ -+int tn7sar_init(struct atm_dev *dev, Tn7AtmPrivate *priv) -+{ -+ int retCode; -+ int hal_funcs_size; -+ -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ OS_FUNCTIONS *pOsFunc; -+ int oamMod; -+ char *pLbTimeout; -+ int lbTimeout; -+ -+ -+ dprintf(4, "tn7sar_init\n"); -+ -+ pOsFunc = (OS_FUNCTIONS *)kmalloc(sizeof(OS_FUNCTIONS), GFP_KERNEL); -+ -+ -+ priv->pSarOsFunc = ( void *)pOsFunc; -+ -+ /* init boot parms */ -+ tn7sar_init_dev_parm(); -+ -+ /* init sar os call back functions */ -+ retCode = tn7sar_init_module(pOsFunc); -+ if (retCode != 0) /* error */ -+ { -+ printk("Failed to init SAR OS Functions\n"); -+ return (1); -+ } -+ -+ /* Init sar hal */ -+ retCode = cpaal5InitModule(&pHalDev, (OS_DEVICE*) dev, &pHalFunc, -+ pOsFunc, sizeof(OS_FUNCTIONS), &hal_funcs_size, 0); -+ if (retCode != 0) /* error */ -+ { -+ printk("Failed to init SAR HAL\n"); -+ return (1); -+ } -+ -+ /* sanity check */ -+ if (pHalDev == NULL || pHalFunc == NULL || hal_funcs_size != sizeof(HAL_FUNCTIONS) ) -+ { -+ printk("Invalid SAR hal and/or functions.\n"); -+ return (1); -+ } -+ -+ /* remeber HAL pointers */ -+ priv->pSarHalDev = (void *)pHalDev; -+ priv->pSarHalFunc = (void *)pHalFunc; -+ -+ /* Probe for the Device to get hardware info from driver */ -+ retCode = pHalFunc->Probe(pHalDev); -+ if (retCode !=0) -+ { -+ printk("SAR hal probing error.\n"); -+ return (1); -+ } -+ -+ /* init sar hal */ -+ retCode = pHalFunc->Init(pHalDev); -+ if (retCode != 0) /* error */ -+ { -+ -+ printk("pHalFunc->Init failed. err code =%d\n", retCode); -+ return (1); -+ } -+ -+ /* open hal module */ -+ retCode = pHalFunc->Open(pHalDev); -+ if (retCode != 0) /* error */ -+ { -+ printk("pHalFunc->open failed, err code: %d\n",retCode ); -+ return (1); -+ } -+ -+ /* init sar for firmware oam */ -+ oamMod= 1; -+ pHalFunc->Control(pHalDev,"OamMode", "Set", &oamMod); -+ -+ /* read in oam lb timeout value */ -+ pLbTimeout = prom_getenv("oam_lb_timeout"); -+ if(pLbTimeout) -+ { -+ lbTimeout =tn7sar_strtoul(pLbTimeout, NULL, 10); -+ oamLbTimeout = lbTimeout; -+ pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &lbTimeout); -+ } -+ else -+ { -+ oamLbTimeout = 5000; -+ } -+ -+ oamFarLBCount[0]=0; -+ oamFarLBCount[1]=0; -+ oamFarLBCount[2]=0; -+ oamFarLBCount[3]=0; -+ -+ memset(&sarStat, 0 , sizeof(sarStat)); -+ -+ /* setup channel 15 for oam operation */ -+ tn7sar_setup_oam_channel(priv); -+ dprintf(4, "tn7sar_init done"); -+ return 0; -+} -+ -+static int -+tn7sar_atm_header(int vpi, int vci) -+{ -+ union -+ { -+ unsigned char byte[4]; -+ unsigned int dword; -+ }atm_h; -+ int itmp = 0; -+ -+ //vci -+ itmp = vci &0xf; -+ atm_h.byte[0] = 0; -+ atm_h.byte[0] |= (itmp << 4); -+ atm_h.byte[1] = ((vci & 0xff0) >> 4); -+ atm_h.byte[2] = 0; -+ atm_h.byte[2] |= ((vci & 0xf000) >>12);; -+ atm_h.byte[2] |= ((vpi & 0xf) << 4); -+ atm_h.byte[3] = 0; -+ atm_h.byte[3] = ((vpi & 0xff0) >> 4); -+ return atm_h.dword; -+} -+ -+int tn7sar_activate_vc(Tn7AtmPrivate *priv, short vpi, int vci, int pcr, int scr, int mbs, int cdvt, int chan, int qos) -+{ -+ CHANNEL_INFO chInfo; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ -+ dprintf(4, "tn7sar_activate_vc\n"); -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ memset(&chInfo, 0xff, sizeof(chInfo)); -+ -+ /* channel specific */ -+ chInfo.Channel = chan; -+ chInfo.Direction = 0; -+ chInfo.Vci = vci; -+ chInfo.Vpi = vpi; -+ chInfo.TxVc_QosType = qos; -+ chInfo.Priority = qos; -+ -+ if(chInfo.TxVc_QosType == 1) /* if the connection is VBR than set the DaMask value to tell the schedular to accumalte the credit */ -+ { -+ chInfo.DaMask = 1; -+ } -+ chInfo.TxVc_Mbs = mbs; /* use pcr as MBS */ -+ pcr = SAR_FREQUNCY/pcr; -+ scr = SAR_FREQUNCY/scr; -+ chInfo.TxVc_CellRate = scr; -+ chInfo.TxVc_Pcr = pcr; -+ -+ /*default */ -+ chInfo.PktType = PACKET_TYPE_AAL5; -+ chInfo.TxServiceMax = TX_SERVICE_MAX; -+ chInfo.RxServiceMax = RX_SERVICE_MAX; -+ chInfo.TxNumQueues = TX_QUEUE_NUM; -+ chInfo.TxNumBuffers = TX_BUFFER_NUM; -+ chInfo.RxNumBuffers = RX_BUFFER_NUM; -+ chInfo.RxBufSize = RX_BUFFER_SIZE; -+ chInfo.RxVc_OamToHost = 0; -+ chInfo.RxVp_OamToHost = 0; -+ chInfo.TxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci); -+ chInfo.RxVc_AtmHeader = tn7sar_atm_header((int)vpi, vci); -+ chInfo.TxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0); -+ chInfo.RxVp_AtmHeader = tn7sar_atm_header((int)vpi, 0); -+ chInfo.CpcsUU = 0; -+ -+ dprintf(4, "TxVc_AtmHeader=0x%x\n", chInfo.TxVc_AtmHeader); -+ -+ if(pHalFunc->ChannelSetup(pHalDev, &chInfo, NULL)) -+ { -+ printk("failed to setup channel =%d.\n", chan); -+ return -1; -+ } -+ -+ -+ return 0; -+} -+ -+int tn7sar_send_packet(Tn7AtmPrivate *priv, int chan, void *new_skb, void *data,unsigned int len, int priority) -+{ -+ FRAGLIST fragList; -+ unsigned int mode; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ -+ dprintf(4, "tn7sar_send_packet\n"); -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ fragList.len = len; -+ fragList.data = (void *)data; -+ -+ xdump((char *)fragList.data , fragList.len, 6); -+ -+ /*mode bit -+ 31-19 unused -+ 18 oam cell, 1 = true, 0=false -+ 17-16 oam type, 0=F4 seg, 1=F4 End, 2=F5 seg, 3=F5 end -+ 15-08 transimit queue, current, 0=priority queue, 1=normal queue -+ 07-00 channel number -+ */ -+ mode = 0; -+ mode |= (0xff & chan); -+ mode |= ((0xff & priority) << 8); -+ -+ dprintf(4, "mode = %d\n", mode); -+ -+ tn7sar_data_writeback(fragList.data, len); -+ if(pHalFunc->Send(pHalDev, &fragList, 1, len, new_skb, mode) != 0) -+ { -+ dprintf(1, "SAR hal failed to send packet.\n"); -+ return 1; -+ } -+ //tn7sar_get_stats(priv); -+ sarStat.txPktCnt++; -+ sarStat.txBytes +=len; -+ return 0; -+} -+ -+ -+ -+int tn7sar_handle_interrupt(struct atm_dev *dev, Tn7AtmPrivate *priv) -+{ -+ int more; -+ int rc; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ int (*halIsr)(HAL_DEVICE *halDev, int *work); -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ halIsr = priv->halIsr; -+ -+ rc = halIsr(pHalDev, &more); -+ -+ pHalFunc->PacketProcessEnd(pHalDev); -+ -+ return rc; -+} -+ -+ -+int tn7sar_deactivate_vc(Tn7AtmPrivate *priv, int chan) -+{ -+ unsigned int mode; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ -+ dprintf(4, "tn7sar_deactivate_vc\n"); -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ mode = 0xf; //tear down everything, wait for return; -+ -+ pHalFunc->ChannelTeardown(pHalDev, chan, mode); -+ return 0; -+} -+ -+void tn7sar_exit(struct atm_dev *dev, Tn7AtmPrivate *priv) -+{ -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ -+ dprintf(4, "tn7sar_exit()\n"); -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ tn7sar_deactivate_vc(priv, 15); // de-activate oam channel -+ -+ pHalFunc->Close(pHalDev, 2); -+ pHalFunc->Shutdown(pHalDev); -+ -+ kfree(priv->pSarOsFunc); -+ -+} -+ -+void tn7sar_get_sar_version(Tn7AtmPrivate *priv, char **pVer) -+{ -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ -+ dprintf(4, "tn7sar_get_sar_version()\n"); -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ pHalFunc->Control(pHalDev, "Version", "Get", pVer); -+} -+ -+ -+int tn7sar_get_near_end_loopback_count(unsigned int *pF4count, unsigned int *pF5count) -+{ -+ unsigned int f4c, f5c; -+ -+ f4c = *(volatile unsigned int *)SAR_PDSP_OAM_F4LB_COUNT_REG_ADDR; -+ f5c = *(volatile unsigned int *)SAR_PDSP_OAM_F5LB_COUNT_REG_ADDR; -+ *pF4count = f4c; -+ *pF5count = f5c; -+ -+ return 0; -+} -+ -+ -+int tn7sar_unmatched_oam_generation(void *privContext, int vpi, int vci, int type) -+{ -+ -+ unsigned int regv = 0; -+ int chan=15; -+ static unsigned int tag; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ Tn7AtmPrivate *priv; -+ unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff}; -+ -+ dprintf(4, "tn7sar_unknow_oam_generation()\n"); -+ -+ priv = (Tn7AtmPrivate *)privContext; -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ if(vci==0) -+ { -+ oamPingStatus = OAM_PING_FAILED; -+ return 0; -+ } -+ /* calculate atm header */ -+ oamAtmHdr = tn7sar_atm_header(vpi,vci); -+ -+ /* config the atm header */ -+ pHalFunc->Control(pHalDev,"TxVc_AtmHeader.15", "Set", &oamAtmHdr); -+ -+ /*record oam type */ -+ oam_type = type; -+ -+ regv = (0xff & chan); -+ -+ switch(type) -+ { -+ case 0: -+ regv |= (1<<12); //f5 end -+ dprintf(2, "f5 loop back\n"); -+ break; -+ case 1: -+ regv |= (1<<13); // f4 end -+ break; -+ case 2: -+ regv |= (1<<14); //f5 seg -+ break; -+ case 3: -+ regv |= (1<<15); //f4 seg -+ break; -+ default: -+ break; -+ } -+ oamPingStatus = OAM_PING_PENDING; -+ pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag); -+ tag++; -+ return 0; -+ -+} -+ -+int tn7sar_oam_generation(void *privContext, int chan, int type, int vpi, int vci, int timeout) -+{ -+ unsigned int regv = 0; -+ static unsigned int tag; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ Tn7AtmPrivate *priv; -+ unsigned int llid[4]={0xffffffff,0xffffffff,0xffffffff,0xffffffff}; -+ -+ dprintf(2, "tn7sar_oam_generation()\n"); -+ -+ priv = (Tn7AtmPrivate *)privContext; -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ if(timeout >= 5000) -+ { -+ if(timeout == 6000) -+ { -+ tn7sar_clear_pvc_table(); -+ return 0; -+ } -+ timeout = oamLbTimeout; -+ } -+ -+ -+ pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &timeout); -+ -+ if(chan == ATM_NO_DMA_CHAN) -+ { -+ tn7sar_unmatched_oam_generation(priv, vpi, vci, type); -+ return 0; -+ } -+ -+ /* calculate atm header */ -+ oamAtmHdr = tn7sar_atm_header(vpi,vci); -+ -+ oam_type = type; -+ -+ regv = (0xff & chan); -+ switch(type) -+ { -+ case 0: -+ regv |= (1<<12); //f5 end -+ dprintf(2, "f5 loop back\n"); -+ break; -+ case 1: -+ regv |= (1<<13); // f4 end -+ break; -+ case 2: -+ regv |= (1<<14); //f5 seg -+ break; -+ case 3: -+ regv |= (1<<15); //f4 seg -+ break; -+ default: -+ break; -+ } -+ oamPingStatus = OAM_PING_PENDING; -+ pHalFunc->OamLoopbackConfig(pHalDev, regv, llid, tag); -+ tag++; -+ -+ return 0; -+} -+ -+int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ -+ len += sprintf(buf+len, "%d\n", oamPingStatus); -+ -+ return len; -+} -+ -+int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ int i; -+ -+ for(i=0;i<16;i++) -+ { -+ if(pvc_result[i].bInUse) -+ { -+ len += sprintf(buf+len, "%d,%d\n", pvc_result[i].vpi,pvc_result[i].vci); -+ } -+ else -+ { -+ len += sprintf(buf+len, "0,0\n"); -+ } -+ } -+ return len; -+} -+ -+ -+ -+int tn7sar_proc_sar_stat(char* buf, char **start, off_t offset, int count,int *eof, void *data) -+{ -+ int len = 0; -+ int limit = count - 80; -+ struct atm_dev *dev; -+ Tn7AtmPrivate *priv; -+ int i, j, k; -+ int stat_len; -+ char statString[32]; -+ unsigned int *pStateBase, *pSarStat; -+ HAL_FUNCTIONS *pHalFunc; -+ HAL_DEVICE *pHalDev; -+ int dBytes; -+ -+ dev = (struct atm_dev *)data; -+ priv = (Tn7AtmPrivate *)dev->dev_data; -+ -+ pHalFunc = (HAL_FUNCTIONS *)priv->pSarHalFunc; -+ pHalDev = (HAL_DEVICE *)priv->pSarHalDev; -+ -+ len += sprintf(buf+len, "SAR HAL Statistics\n"); -+ for(i=0;i<MAX_DMA_CHAN;i++) -+ { -+ if(priv->lut[i].inuse) -+ { -+ if(len<=limit) -+ len += sprintf(buf+len, "\nChannel %d:\n",priv->lut[i].chanid); -+ k=0; -+ for(j=0;j<4;j++) -+ { -+ stat_len =sprintf(statString, "Stats;%d;%d", j,priv->lut[i].chanid); -+ statString[stat_len]=0; -+ pHalFunc->Control(pHalDev, statString, "Get", &pSarStat); -+ pStateBase = pSarStat; -+ while(pSarStat) -+ { -+ if((char *)*pSarStat == NULL) -+ break; -+ if(len<=limit) -+ { -+ dBytes = sprintf(buf+len, "%s: ",(char *) *pSarStat); -+ len += dBytes; -+ k += dBytes; -+ } -+ pSarStat++; -+ if(len<=limit) -+ { -+ dBytes = sprintf(buf+len, "%s; ",(char *) *pSarStat); -+ len += dBytes; -+ k += dBytes; -+ } -+ pSarStat++; -+ -+ if(k > 60) -+ { -+ k=0; -+ if(len<=limit) -+ len += sprintf(buf+len, "\n"); -+ } -+ } -+ -+ kfree(pStateBase); -+ } -+ } -+ } -+ -+ return len; -+} -+ -+void tn7sar_get_sar_firmware_version(unsigned int *pdsp_version_ms, unsigned int *pdsp_version_ls) -+{ -+ -+ *pdsp_version_ms = (SarPdspFirmware[9]>>20) & 0xF; -+ *pdsp_version_ls = (SarPdspFirmware[9]>>12) & 0xFF; -+ return; -+} -diff -urN linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h ---- linux.old/drivers/atm/sangam_atm/tnetd7300_sar_firm.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/tnetd7300_sar_firm.h 2005-08-23 04:46:50.111841568 +0200 -@@ -0,0 +1,988 @@ -+//SarPdspFirmware Revision: 49 -+ -+static int SarPdspFirmware[] = { -+ 0xb0a8d1f1, -+ 0x000003d8, -+ 0x00000000, -+ 0x00000004, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x00000000, -+ 0x21000900, -+ 0x24049080, -+ 0x24000080, -+ 0x240000c0, -+ 0x10e0e0e1, -+ 0x10e0e0e2, -+ 0x10e0e0e3, -+ 0x10e0e0e4, -+ 0x10e0e0e5, -+ 0x10e0e0e6, -+ 0x10e0e0e7, -+ 0x10e0e0e8, -+ 0x10e0e0e9, -+ 0x10e0e0ea, -+ 0x10e0e0eb, -+ 0x10e0e0ec, -+ 0x10e0e0ed, -+ 0x10e0e0ee, -+ 0x10e0e0ef, -+ 0x10e0e0f0, -+ 0x10e0e0f1, -+ 0x10e0e0f2, -+ 0x10e0e0f3, -+ 0x10e0e0f4, -+ 0x10e0e0f5, -+ 0x10e0e0f6, -+ 0x10e0e0f7, -+ 0x10e0e0f8, -+ 0x10e0e0f9, -+ 0x10e0e0fa, -+ 0x10e0e0fb, -+ 0x10e0e0fc, -+ 0x10e0e0fd, -+ 0x10e0e0fe, -+ 0x10e0e0ff, -+ 0x81042680, -+ 0x810c2680, -+ 0x81042680, -+ 0x2483c080, -+ 0x81180b80, -+ 0x2484c080, -+ 0x811a0b80, -+ 0x2485c080, -+ 0x811c0b80, -+ 0x240100dd, -+ 0xa07d06fd, -+ 0x240400dd, -+ 0xa07d04fd, -+ 0x24c000dd, -+ 0x2400169d, -+ 0xa07d5cfd, -+ 0x511f9d03, -+ 0x01019d9d, -+ 0x7f0000fd, -+ 0xd11eff05, -+ 0x97c06890, -+ 0x1d00e5e5, -+ 0x2301229e, -+ 0x81bc2890, -+ 0x24000000, -+ 0xc917ff02, -+ 0x81000100, -+ 0x01010000, -+ 0xc918ff02, -+ 0x81000100, -+ 0x01010000, -+ 0xc919ff02, -+ 0x81000100, -+ 0xd110e70a, -+ 0xd11cff09, -+ 0x1d00e5e5, -+ 0xd100e704, -+ 0xd114ff06, -+ 0x2301179e, -+ 0x79000004, -+ 0xd70ffffd, -+ 0x91382486, -+ 0x2301059e, -+ 0xc903ff07, -+ 0xa06047e0, -+ 0xb10043e6, -+ 0xc910e602, -+ 0x81000106, -+ 0x24006025, -+ 0x2300d39e, -+ 0xd11dff09, -+ 0x1f00e5e5, -+ 0xc901e705, -+ 0xd111ff06, -+ 0x91382586, -+ 0x2301059e, -+ 0x79000003, -+ 0xd715fffc, -+ 0x2301179e, -+ 0xc910e706, -+ 0x110f2760, -+ 0x240000c6, -+ 0x24000086, -+ 0x13106006, -+ 0x7b00005a, -+ 0x11079f80, -+ 0x51008010, -+ 0xc912ff0f, -+ 0xd100ff04, -+ 0xd101ff05, -+ 0xa06046e0, -+ 0x79000004, -+ 0xa06044e0, -+ 0x79000002, -+ 0xa06045e0, -+ 0xb10043e6, -+ 0x61150602, -+ 0x2101c500, -+ 0xc910e602, -+ 0xa1001006, -+ 0x24000025, -+ 0x2300d39e, -+ 0xd11fff05, -+ 0x97c06a90, -+ 0x1f00e5e5, -+ 0x2301229e, -+ 0x81bc2a90, -+ 0xd11cff09, -+ 0x1d00e5e5, -+ 0xc900e705, -+ 0xd10fff06, -+ 0x91382486, -+ 0x2301059e, -+ 0x79000003, -+ 0xd714fffc, -+ 0x2301179e, -+ 0xc907ff07, -+ 0xa0604be0, -+ 0xb10043e6, -+ 0xc910e602, -+ 0x81000106, -+ 0x24006025, -+ 0x2300d39e, -+ 0xd111e70a, -+ 0xd11dff09, -+ 0x1f00e5e5, -+ 0xd101e704, -+ 0xd115ff06, -+ 0x2301179e, -+ 0x79000004, -+ 0xd711fffd, -+ 0x91382586, -+ 0x2301059e, -+ 0xc911e706, -+ 0x0b042760, -+ 0x240000c6, -+ 0x24000086, -+ 0x13106006, -+ 0x7b000024, -+ 0x11709f80, -+ 0x5100800e, -+ 0xc913ff0d, -+ 0xd104ff04, -+ 0xd105ff05, -+ 0xa0604ae0, -+ 0x79000004, -+ 0xa06048e0, -+ 0x79000002, -+ 0xa06049e0, -+ 0xb10043e6, -+ 0xc910e602, -+ 0xa1001106, -+ 0x24000025, -+ 0x2300d39e, -+ 0xc90bff02, -+ 0x7900000b, -+ 0xc90aff02, -+ 0x79000012, -+ 0xcf08ff89, -+ 0xb10002e0, -+ 0xcf18e087, -+ 0x790000b6, -+ 0x24000080, -+ 0x24fb00c0, -+ 0xa06003e0, -+ 0x7f000082, -+ 0xb10024e6, -+ 0xb10025e0, -+ 0xa06628e6, -+ 0xa06029e0, -+ 0x248000c6, -+ 0xa06624e6, -+ 0x671006f0, -+ 0x81082186, -+ 0x7f0000ee, -+ 0xb10027e6, -+ 0x61100604, -+ 0xa0662be6, -+ 0x810c2186, -+ 0x79000006, -+ 0xd70cffea, -+ 0xa0662be6, -+ 0x1f1be6e6, -+ 0x81382686, -+ 0x813c2680, -+ 0x248000c6, -+ 0xa06627e6, -+ 0x7f0000e3, -+ 0x110f0600, -+ 0x81100b00, -+ 0x01502545, -+ 0x90457888, -+ 0x5103091c, -+ 0x6901092a, -+ 0xc910e603, -+ 0xd108e90d, -+ 0x79000027, -+ 0x01582545, -+ 0x9045788a, -+ 0xd108e904, -+ 0x1f08e9e9, -+ 0x01552545, -+ 0x80451829, -+ 0x50eaeb20, -+ 0x0101ebeb, -+ 0x015c2545, -+ 0x8045388b, -+ 0x7900001c, -+ 0x015c2545, -+ 0x9045788b, -+ 0x6900eb05, -+ 0x1d08e9e9, -+ 0x01552545, -+ 0x80451829, -+ 0x79000004, -+ 0x0501ebeb, -+ 0x015c2545, -+ 0x8045388b, -+ 0x10ecece8, -+ 0x79000010, -+ 0x24000000, -+ 0x5110000e, -+ 0x690f6903, -+ 0x24000069, -+ 0x79000002, -+ 0x01016969, -+ 0x01010000, -+ 0x81100b69, -+ 0x01542545, -+ 0x90451809, -+ 0x6f0209f7, -+ 0xa1001069, -+ 0x81100b06, -+ 0x01572545, -+ 0x80451869, -+ 0xa06841e8, -+ 0xa1414006, -+ 0x209e0000, -+ 0x81100b06, -+ 0xd11fe603, -+ 0x9164388d, -+ 0x8108248d, -+ 0xd100e507, -+ 0x97406490, -+ 0x9108248d, -+ 0x813c2480, -+ 0x2302b4de, -+ 0x1d00e7e7, -+ 0x79000006, -+ 0x97406590, -+ 0x9108258d, -+ 0x813c2580, -+ 0x1d01e7e7, -+ 0x2302b9de, -+ 0x8164388d, -+ 0x209e0000, -+ 0x81040105, -+ 0x91002286, -+ 0x97086290, -+ 0x81042280, -+ 0xd100e504, -+ 0x2302b4de, -+ 0x1f00e7e7, -+ 0x209e0000, -+ 0x2302b9de, -+ 0x1f01e7e7, -+ 0x209e0000, -+ 0xd109ff00, -+ 0xa0702cf0, -+ 0x79000001, -+ 0xd109ff00, -+ 0xb1002de6, -+ 0xd11ee609, -+ 0xb1000de0, -+ 0xc91fe044, -+ 0x24c338c6, -+ 0x10000006, -+ 0x81382686, -+ 0x87406690, -+ 0x813c2680, -+ 0x7900003e, -+ 0x110f0600, -+ 0x81100b00, -+ 0x24000045, -+ 0x24000025, -+ 0x61100603, -+ 0x24006045, -+ 0x24006025, -+ 0x01704545, -+ 0x90451888, -+ 0x0b034600, -+ 0x11070000, -+ 0x69040004, -+ 0xc916ff2c, -+ 0x01019e9e, -+ 0x7900002f, -+ 0xc90cff04, -+ 0x6f0200fd, -+ 0xd308e8a1, -+ 0x7f0000fb, -+ 0x69020008, -+ 0xd308e89e, -+ 0xb1002fe6, -+ 0x91b82880, -+ 0xc91ce002, -+ 0x1f1ce6e6, -+ 0x10080806, -+ 0x79000015, -+ 0xb1002fe6, -+ 0x69030003, -+ 0x13c06666, -+ 0x79000011, -+ 0x91807809, -+ 0xc910ea09, -+ 0x81082689, -+ 0x01018a8a, -+ 0xc91ee60a, -+ 0x1d10eaea, -+ 0x240557c0, -+ 0x60c08a07, -+ 0x1f1de6e6, -+ 0x79000005, -+ 0x2400018a, -+ 0x1f10eaea, -+ 0x1f1fe6e6, -+ 0xd71ee6f8, -+ 0x51000002, -+ 0x11c76666, -+ 0x81382686, -+ 0x87406690, -+ 0x91082689, -+ 0x813c2680, -+ 0xb1002ee6, -+ 0xd103e609, -+ 0x81807809, -+ 0xc908e807, -+ 0x21039400, -+ 0x81002386, -+ 0x87086390, -+ 0x81042380, -+ 0xc908e802, -+ 0x21039400, -+ 0x209e0000, -+ 0xb10008ef, -+ 0x110f0f00, -+ 0x81100b00, -+ 0x24000025, -+ 0x61100f02, -+ 0x24005025, -+ 0x01952545, -+ 0x9045382e, -+ 0xc91def03, -+ 0x24000900, -+ 0x2301c09e, -+ 0xc91cef03, -+ 0x24001900, -+ 0x2301c09e, -+ 0xc91bef03, -+ 0x24000a00, -+ 0x2301c09e, -+ 0xc91aef03, -+ 0x24001a00, -+ 0x2301c09e, -+ 0x8045382e, -+ 0x01a82545, -+ 0x9045388e, -+ 0xc915ef03, -+ 0x24000000, -+ 0x2301c09e, -+ 0xc914ef03, -+ 0x24001000, -+ 0x2301c09e, -+ 0x8045388e, -+ 0x61100f02, -+ 0x24006025, -+ 0x016d2545, -+ 0x9045382e, -+ 0xc919ef03, -+ 0x24000900, -+ 0x2301c09e, -+ 0xc918ef03, -+ 0x24001900, -+ 0x2301c09e, -+ 0xc917ef03, -+ 0x24000a00, -+ 0x2301c09e, -+ 0xc916ef03, -+ 0x24001a00, -+ 0x2301c09e, -+ 0x8045382e, -+ 0x017c2545, -+ 0x9045388e, -+ 0xc913ef03, -+ 0x24000000, -+ 0x2301c09e, -+ 0xc912ef03, -+ 0x24001000, -+ 0x2301c09e, -+ 0x8045388e, -+ 0xd11eef19, -+ 0x11f02f00, -+ 0x51000017, -+ 0x24001520, -+ 0x81140b20, -+ 0x81b01a0f, -+ 0x1f02e7e7, -+ 0x24c000c0, -+ 0x24001580, -+ 0xa0605ce0, -+ 0xc90fef04, -+ 0x1d04e7e7, -+ 0x1d05e7e7, -+ 0x7900000c, -+ 0xc90eef04, -+ 0x1d04e7e7, -+ 0x1f05e7e7, -+ 0x79000008, -+ 0xc90def04, -+ 0x1f04e7e7, -+ 0x1d05e7e7, -+ 0x79000004, -+ 0xc90cef03, -+ 0x1f04e7e7, -+ 0x1f05e7e7, -+ 0x2100b900, -+ 0xd11eef03, -+ 0x1e00eeee, -+ 0x209e0000, -+ 0x1c00eeee, -+ 0x209e0000, -+ 0x110f0606, -+ 0x81140b06, -+ 0x13100606, -+ 0x91b01a83, -+ 0x24000025, -+ 0x61100304, -+ 0x24005025, -+ 0xc905e702, -+ 0x24006025, -+ 0x110f0300, -+ 0x81100b00, -+ 0x81120b00, -+ 0x51150611, -+ 0x61100302, -+ 0x24005025, -+ 0x1d01e5e5, -+ 0x51160639, -+ 0x511a0650, -+ 0x511c0657, -+ 0x5118065e, -+ 0x511e0685, -+ 0x61100302, -+ 0x24006025, -+ 0x1f01e5e5, -+ 0x51170634, -+ 0x511b064b, -+ 0x511d0652, -+ 0x51190658, -+ 0x511f067f, -+ 0xc903e708, -+ 0x1d03e7e7, -+ 0x24000060, -+ 0xa1000a60, -+ 0x244000c0, -+ 0x24001580, -+ 0xa0605ce0, -+ 0x21007d00, -+ 0xcf02e7fc, -+ 0x1d02e7e7, -+ 0x1f03e7e7, -+ 0xc904e703, -+ 0x1f08e3e3, -+ 0x79000002, -+ 0x1d08e3e3, -+ 0xc905e705, -+ 0x01682545, -+ 0x9045588d, -+ 0x2302879e, -+ 0x79000004, -+ 0x01902545, -+ 0x9045588d, -+ 0x2302819e, -+ 0x24001872, -+ 0x24000152, -+ 0xb10009e0, -+ 0x108080d3, -+ 0x10c0c092, -+ 0x2400102c, -+ 0x2302c8de, -+ 0x91021c97, -+ 0x91001cd8, -+ 0x91061c98, -+ 0x91041cd9, -+ 0x910a1c99, -+ 0x91081cda, -+ 0x910e1c9a, -+ 0x910c1cdb, -+ 0x91261d9b, -+ 0x91287d9c, -+ 0x23028dde, -+ 0x1f02e7e7, -+ 0x1d03e7e7, -+ 0x7d000070, -+ 0x01902545, -+ 0x9045798d, -+ 0x79000003, -+ 0x01682545, -+ 0x9045788d, -+ 0x0b09eee0, -+ 0x24001472, -+ 0xd108e303, -+ 0xc900e00b, -+ 0x79000002, -+ 0xc910e009, -+ 0xd101e503, -+ 0x2302819e, -+ 0x79000002, -+ 0x2302879e, -+ 0x91013d12, -+ 0x9504bd93, -+ 0x23028dde, -+ 0x7d00005d, -+ 0xd108ee03, -+ 0x1d10e7e7, -+ 0x7900009a, -+ 0x1d11e7e7, -+ 0x79000098, -+ 0x01902545, -+ 0x9045798d, -+ 0x79000003, -+ 0x01682545, -+ 0x9045788d, -+ 0x0b0aeee0, -+ 0x24001072, -+ 0x7f0000e8, -+ 0x01a02545, -+ 0x9045b98d, -+ 0x79000003, -+ 0x01742545, -+ 0x9045b88d, -+ 0x0b01efe0, -+ 0x24001172, -+ 0x7f0000e0, -+ 0x2302d1de, -+ 0x79000002, -+ 0x2302d6de, -+ 0x000c2545, -+ 0x9045198f, -+ 0xd100ef07, -+ 0x1d02efef, -+ 0xc901ef0c, -+ 0xc905ef0b, -+ 0x1d01efef, -+ 0x1d05efef, -+ 0x79000008, -+ 0xd102ef04, -+ 0x1f02efef, -+ 0x8045198f, -+ 0x79000078, -+ 0xd101ef04, -+ 0x1f01efef, -+ 0x1f05efef, -+ 0x8045198f, -+ 0x69180673, -+ 0x01ac2545, -+ 0x2302dbde, -+ 0xd100ef03, -+ 0x23036c9e, -+ 0x7900006e, -+ 0xc800e40b, -+ 0x110f0020, -+ 0x81100b20, -+ 0x100c0c45, -+ 0x61100002, -+ 0x01604545, -+ 0x9045188f, -+ 0xd101ef04, -+ 0x1f01efef, -+ 0x1f07efef, -+ 0x8045188f, -+ 0x01010000, -+ 0x6f1300f4, -+ 0x79000060, -+ 0x2302d1de, -+ 0x79000002, -+ 0x2302d6de, -+ 0x000c2545, -+ 0x9045198f, -+ 0xc903ef05, -+ 0x1d03efef, -+ 0x1f04efef, -+ 0x8045198f, -+ 0x79000056, -+ 0xc904ef55, -+ 0x1d04efef, -+ 0xc901ef04, -+ 0xc906ef03, -+ 0x1d01efef, -+ 0x1d06efef, -+ 0x8045198f, -+ 0x691e064e, -+ 0x01ac2545, -+ 0x2302dbde, -+ 0xc800e40c, -+ 0x110f0020, -+ 0x81100b20, -+ 0x100c0c45, -+ 0x61100002, -+ 0x01604545, -+ 0x9045188f, -+ 0xc901ef05, -+ 0xc908ef04, -+ 0x1d01efef, -+ 0x1d07efef, -+ 0x8045188f, -+ 0x01010000, -+ 0x6f1300f3, -+ 0x7900003d, -+ 0x10ededf0, -+ 0xc908e303, -+ 0x13401010, -+ 0x209e0000, -+ 0x13301010, -+ 0x209e0000, -+ 0x10ededf0, -+ 0xc908e303, -+ 0x130a1010, -+ 0x209e0000, -+ 0x13081010, -+ 0x209e0000, -+ 0x24000266, -+ 0x2400c800, -+ 0x24000020, -+ 0xd108ee17, -+ 0x01012020, -+ 0xc91cff09, -+ 0x6e0020fe, -+ 0xc910e702, -+ 0x20de0000, -+ 0x1f10e7e7, -+ 0x110f0600, -+ 0x11f02727, -+ 0x12002727, -+ 0x20de0000, -+ 0x1d10e7e7, -+ 0x2302b4de, -+ 0x511d0605, -+ 0x511c0602, -+ 0x7900001e, -+ 0x01a62545, -+ 0x79000002, -+ 0x01722545, -+ 0x90451880, -+ 0x01018080, -+ 0x80451880, -+ 0x79000017, -+ 0x01012020, -+ 0xc91dff09, -+ 0x6e0020fe, -+ 0xc911e702, -+ 0x20de0000, -+ 0x1f11e7e7, -+ 0x09040600, -+ 0x110f2727, -+ 0x12002727, -+ 0x20de0000, -+ 0x1d11e7e7, -+ 0x2302b9de, -+ 0x7f0000ea, -+ 0x81b82786, -+ 0x240000d1, -+ 0x87c06790, -+ 0x81bc2780, -+ 0x20de0000, -+ 0x81b82986, -+ 0x87c06990, -+ 0x81bc2980, -+ 0x20de0000, -+ 0x91b43a88, -+ 0x2301029e, -+ 0x51150608, -+ 0xc908e305, -+ 0x51120303, -+ 0x01010303, -+ 0x79000002, -+ 0x24000003, -+ 0x01012323, -+ 0x81b01a83, -+ 0x21007d00, -+ 0x902cfc88, -+ 0x10c8c893, -+ 0x108888d4, -+ 0x10c9c994, -+ 0x108989d5, -+ 0x10caca95, -+ 0x108a8ad6, -+ 0x10cbcb96, -+ 0x108b8bd7, -+ 0xd108e303, -+ 0x2400a80c, -+ 0x20de0000, -+ 0x2400aa0c, -+ 0x20de0000, -+ 0xd108e303, -+ 0x24007c0c, -+ 0x20de0000, -+ 0x24007e0c, -+ 0x20de0000, -+ 0x24000000, -+ 0x90453904, -+ 0xd108e303, -+ 0x24007c0c, -+ 0x20de0000, -+ 0x24007e0c, -+ 0x20de0000, -+ 0xb1002fe6, -+ 0x91b82880, -+ 0xc91ce002, -+ 0x209e0000, -+ 0xb1002ee6, -+ 0x69187279, -+ 0xd110f230, -+ 0xc903e769, -+ 0xc90be604, -+ 0xc904e767, -+ 0xd105e766, -+ 0x7900000c, -+ 0xc90ae604, -+ 0xd104e763, -+ 0xd105e762, -+ 0x79000008, -+ 0xc907e604, -+ 0xc904e75f, -+ 0xc905e75e, -+ 0x79000004, -+ 0xc906e65c, -+ 0xd104e75b, -+ 0xc905e75a, -+ 0x91003c80, -+ 0x6897c058, -+ 0x68d88057, -+ 0x91043c80, -+ 0x6898c055, -+ 0x68d98054, -+ 0x91083c80, -+ 0x6899c052, -+ 0x68da8051, -+ 0x910c3c80, -+ 0x689ac04f, -+ 0x68db804e, -+ 0xb10009e0, -+ 0x6892c04c, -+ 0x68d3804b, -+ 0x24000160, -+ 0xa1000a60, -+ 0x244000c0, -+ 0x24001580, -+ 0xa0605ce0, -+ 0x1d03e7e7, -+ 0x109393c8, -+ 0x10d4d488, -+ 0x109494c9, -+ 0x10d5d589, -+ 0x109595ca, -+ 0x10d6d68a, -+ 0x109696cb, -+ 0x10d7d78b, -+ 0x8110fc88, -+ 0x209e0000, -+ 0x91003c80, -+ 0x6893c00c, -+ 0x68d4800b, -+ 0x91043c80, -+ 0x6894c009, -+ 0x68d58008, -+ 0x91083c80, -+ 0x6895c006, -+ 0x68d68005, -+ 0x910c3c80, -+ 0x6896c003, -+ 0x68d78002, -+ 0x79000010, -+ 0x24ffff80, -+ 0x24ffffc0, -+ 0x68809306, -+ 0x68e0f405, -+ 0x68e0f504, -+ 0x68e0f603, -+ 0x6880d702, -+ 0x79000008, -+ 0x24000080, -+ 0x240000c0, -+ 0x68809323, -+ 0x68e0f422, -+ 0x68e0f521, -+ 0x68e0f620, -+ 0x6880d71f, -+ 0x1d10f2f2, -+ 0x2400002c, -+ 0x2302c8de, -+ 0x24000f80, -+ 0x240000c0, -+ 0x0101c0c0, -+ 0xd100e504, -+ 0xc91cff06, -+ 0x6e80c0fd, -+ 0x21016d00, -+ 0xc91dff03, -+ 0x6e80c0fa, -+ 0x21016d00, -+ 0xd104e606, -+ 0xc909e608, -+ 0xb1000ce0, -+ 0x0101e0e0, -+ 0xa0600ce0, -+ 0x79000004, -+ 0xb1000be0, -+ 0x0101e0e0, -+ 0xa0600be0, -+ 0xb1002fe6, -+ 0xd100e504, -+ 0x2302b4de, -+ 0x24000022, -+ 0x209e0000, -+ 0x2302b9de, -+ 0x24000042, -+ 0x209e0000, -+ 0xd104e609, -+ 0x01782545, -+ 0x9045180e, -+ 0x110f0e00, -+ 0x81100b00, -+ 0x2400a445, -+ 0x51002502, -+ 0x01504545, -+ 0x90451888, -+ 0xc909e87d, -+ 0xb1002fe6, -+ 0x1f1fe6e6, -+ 0x10080806, -+ 0x21015f00, -+ 0x6914721b, -+ 0x01782545, -+ 0x2303bade, -+ 0x900c188f, -+ 0x1d02efef, -+ 0xc901ef05, -+ 0xc905ef04, -+ 0x1d01efef, -+ 0x1d05efef, -+ 0x800c188f, -+ 0xc909e66e, -+ 0x2303d0de, -+ 0xc800e40c, -+ 0x110f0020, -+ 0x81100b20, -+ 0x100c0c45, -+ 0x61100002, -+ 0x01604545, -+ 0x9045188f, -+ 0xc901ef05, -+ 0xc907ef04, -+ 0x1d01efef, -+ 0x1d07efef, -+ 0x8045188f, -+ 0x01010000, -+ 0x6f1300f3, -+ 0x7900005e, -+ 0x6910725d, -+ 0x01782545, -+ 0x2303bade, -+ 0x900c188f, -+ 0x1f03efef, -+ 0xd101ef03, -+ 0x1f01efef, -+ 0x1f06efef, -+ 0x800c188f, -+ 0xc909e654, -+ 0x2303d0de, -+ 0xc800e40b, -+ 0x110f0020, -+ 0x81100b20, -+ 0x100c0c45, -+ 0x61100002, -+ 0x01604545, -+ 0x9045188f, -+ 0xd101ef04, -+ 0x1f01efef, -+ 0x1f08efef, -+ 0x8045188f, -+ 0x01010000, -+ 0x6f1300f4, -+ 0x79000045, -+ 0x01782545, -+ 0x9045788e, -+ 0x1d02efef, -+ 0x1d12efef, -+ 0xc905ef04, -+ 0x1d05efef, -+ 0x1d01efef, -+ 0x7900000c, -+ 0xc915ef04, -+ 0x1d15efef, -+ 0x1d11efef, -+ 0x79000008, -+ 0xc907ef04, -+ 0x1d07efef, -+ 0x1d01efef, -+ 0x79000004, -+ 0xc917ef03, -+ 0x1d17efef, -+ 0x1d11efef, -+ 0x017c2545, -+ 0x8045388f, -+ 0x110f0e00, -+ 0x81100b00, -+ 0x2400a845, -+ 0x51002502, -+ 0x01504545, -+ 0x9045388f, -+ 0x1d02efef, -+ 0x1d12efef, -+ 0xc905ef04, -+ 0x1d05efef, -+ 0x1d01efef, -+ 0x79000004, -+ 0xc915ef03, -+ 0x1d15efef, -+ 0x1d11efef, -+ 0x8045388f, -+ 0x7900001f, -+ 0xc909e60d, -+ 0x9045180e, -+ 0x110f0e00, -+ 0x81100b00, -+ 0xc90ae603, -+ 0x2400a80c, -+ 0x79000003, -+ 0xc90be617, -+ 0x2400aa0c, -+ 0x51002503, -+ 0x01500c0c, -+ 0x24005025, -+ 0x20de0000, -+ 0xc904e611, -+ 0xc906e603, -+ 0x24007c0c, -+ 0x79000003, -+ 0xc907e60d, -+ 0x24007e0c, -+ 0x51002502, -+ 0x01600c0c, -+ 0x20de0000, -+ 0x01ac2545, -+ 0x24000000, -+ 0x90453804, -+ 0xd10be603, -+ 0x24007c0c, -+ 0x20de0000, -+ 0x24007e0c, -+ 0x20de0000, -+ 0x209e0000}; -diff -urN linux.old/drivers/atm/sangam_atm/turbodsl.c linux.dev/drivers/atm/sangam_atm/turbodsl.c ---- linux.old/drivers/atm/sangam_atm/turbodsl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/atm/sangam_atm/turbodsl.c 2005-08-23 04:46:50.111841568 +0200 -@@ -0,0 +1,223 @@ -+ -+ -+/* -+ * -+ * Turbo DSL Implementaion -+ * -+ * Zhicheng Tang ztang@ti.com -+ * -+ * 2002 (c) Texas Instruments Inc. -+ * -+*/ -+ -+/* defines and variables */ -+#define RFC2684_BRIDGED_HDR_SIZE 10 -+unsigned char LLC_BRIDGED_HEADER_2684[RFC2684_BRIDGED_HDR_SIZE] = -+ {0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00}; -+ -+#define RFC2684_ROUTED_HDR_SIZE 6 -+unsigned char LLC_ROUTED_HEADER_2684[6] ={0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00}; -+ -+unsigned long PPP_LLC_HEADER = 0xCF03FEFE; -+ -+/* struct definition */ -+enum -+{ -+ AAL5_ENCAP_PPP_LLC, -+ AAL5_ENCAP_PPP_VCMUX, -+ AAL5_ENCAP_RFC2684_LLC_BRIDGED, -+ AAL5_ENCAP_RFC2684_LLC_ROUTED -+}; -+ -+/* Etherent header */ -+typedef struct _turbodsl_ether_header -+{ -+ unsigned char dst_mac_addr[6]; -+ unsigned char src_mac_addr[6]; -+ unsigned short ether_type; -+} turbodsl_ether_header_t; -+ -+ -+/* Ip header define */ -+typedef struct _turbodsl_ip_header -+{ -+ -+ unsigned short vit; -+ unsigned short total_length; -+ unsigned short ip_id; -+ unsigned char flag; /* bit 0 = 0, bit1 = don't fragment, bit2=more frag */ -+ unsigned char fragment_offset; /* offset include remaining 5 bits above, which make it 13 bits */ -+ unsigned char time_to_live; -+ unsigned char protocol; -+ unsigned short checksum; -+ unsigned int src_ip; -+ unsigned int dst_ip; -+} turbodsl_ip_header_t; -+ -+/* Arp packet define */ -+typedef struct _turbodsl_arp_header -+{ -+ unsigned short hardware_type; -+ unsigned short protocol_type; -+ unsigned char h_len; -+ unsigned char p_len; -+ unsigned short operation ; -+ unsigned char snd_hw_address[6]; -+ unsigned char snd_pt_address[4]; -+ unsigned char dst_hw_address[6]; -+ unsigned char dst_pt_address[4]; -+} turbodsl_arp_header_t; -+ -+#define FIN_FLAG 1 -+#define SYN_FLAG 1<<1 -+#define RST_FLAG 1<<2 -+#define PSH_FLAG 1<<3 -+#define ACK_FLAG 1<<4 -+#define URG_FLAG 1<<5 -+ -+typedef struct _turbodsl_tcp_header -+{ -+ unsigned short src_port; -+ unsigned short dst_port; -+ unsigned int seq_num; -+ unsigned int ack_num; -+ unsigned char offset; /* only bits 4-7 are for offset */ -+ unsigned char flags; /* bits: 0-FIN, 1-SYN, 2-RST, 3-PSH, 4-ACK, 5-URG */ -+ unsigned short windows; -+ unsigned short checksum; -+ unsigned short urgent_ptr; -+} turbodsl_tcp_header_t; -+ -+ -+ -+/*************************************************************************** -+ * Function: turbodsl_memory_compare -+ * Descripation: Memory compare -+ ****************************************************************************/ -+int turbodsl_memory_compare(unsigned char *pIn, unsigned char *pOut, unsigned int len) -+ { -+ int i; -+ -+ for(i=0;i<(int)len; i++) -+ { -+ if(pIn[i] != pOut[i]) -+ return 0; -+ } -+ return 1; -+ } -+ -+/*************************************************************************** -+ * Function: turbodsl_check_aal5_encap_type -+ * Descripation: Determine AAL5 Encapsulation type -+ * Input: -+ * unsigned char *pData, AAL5 Packet buffer pointer -+ ****************************************************************************/ -+int turbodsl_check_aal5_encap_type(unsigned char *pData) -+ { -+ -+ if(turbodsl_memory_compare(pData, LLC_BRIDGED_HEADER_2684, 6)) -+ return AAL5_ENCAP_RFC2684_LLC_BRIDGED; -+ if(turbodsl_memory_compare(pData, LLC_ROUTED_HEADER_2684, 6)) -+ return AAL5_ENCAP_RFC2684_LLC_ROUTED; -+ if(turbodsl_memory_compare(pData, (unsigned char *)&PPP_LLC_HEADER, sizeof(PPP_LLC_HEADER))) -+ return AAL5_ENCAP_PPP_LLC; -+ -+ return AAL5_ENCAP_PPP_VCMUX; -+ } -+ -+/*************************************************************************** -+ * Function: turbodsl_check_priority_type -+ * Descripation: Determine AAL5 Encapsulation type -+ * Input: -+ * unsigned char *pData, AAL5 Packet buffer pointer. -+ * short vpi, VPI. -+ * int vci, VCI -+ ****************************************************************************/ -+int turbodsl_check_priority_type(unsigned char *pData) -+ { -+ int encap; -+ unsigned char *pP; -+ unsigned short etherType; -+ turbodsl_ip_header_t *pIp; -+ turbodsl_tcp_header_t *pTcp; -+ unsigned short ip_length; -+ -+ dprintf(2, "turbodsl_check_priority_type ==>\n"); -+ -+ encap = turbodsl_check_aal5_encap_type(pData); -+ pP = pData; -+ -+ switch(encap) -+ { -+ case AAL5_ENCAP_RFC2684_LLC_BRIDGED: -+ pP += RFC2684_BRIDGED_HDR_SIZE; //skip off aal5 encap -+ pP += 12; //skip of mac address -+ etherType = *(unsigned short *)pP; -+ if(etherType != 0x6488 && etherType != 0x0008) -+ { -+ //Not an IP packet -+ return 1; -+ } -+ -+ pP +=2; //skip ether type -+ if(etherType == 0x6488) -+ { -+ pP += 6; -+ } -+ break; -+ case AAL5_ENCAP_RFC2684_LLC_ROUTED: -+ pP += RFC2684_ROUTED_HDR_SIZE; //skip of encap -+ pP += 2; //skip ether type -+ break; -+ case AAL5_ENCAP_PPP_LLC: -+ pP += sizeof(PPP_LLC_HEADER); -+ if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header -+ pP += 2; -+ break; -+ case AAL5_ENCAP_PPP_VCMUX: -+ if(*pP == 0xff && *(pP+1) == 0x03) //ppp hdlc header -+ pP += 2; -+ break; -+ default: -+ return 1; -+ } -+ -+ pIp = (turbodsl_ip_header_t *)pP; -+ if(pIp->vit != 0x0045) -+ { -+ //Not a IP packet -+ return 1; -+ } -+ -+ if(pIp->protocol != 0x06) -+ { -+ //not tcp packet -+ return 1; -+ } -+ -+ pTcp = (turbodsl_tcp_header_t *)(pP + sizeof(turbodsl_ip_header_t)); -+ -+ ip_length = (pIp->total_length>>8) + (pIp->total_length<<8); -+ -+ if((pTcp->flags & ACK_FLAG) && ip_length <=40) -+ return 0; -+ -+ return 1; -+ } -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ diff -urN linux.old/include/linux/atmdev.h linux.dev/include/linux/atmdev.h --- linux.old/include/linux/atmdev.h 2005-08-22 23:18:37.812526104 +0200 +++ linux.dev/include/linux/atmdev.h 2005-08-23 06:33:33.425389944 +0200 |