diff options
13 files changed, 166 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 652787b..3cd5c0f 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -63,6 +63,9 @@ get_status_led() { v22rw-2x2) status_led="v22rw-2x2:green:security" ;; + w502u) + status_led="alfa:blue:wps" + ;; whr-g300n) status_led="whr-g300n:green:router" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 55c577e..47f7f01 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -57,6 +57,7 @@ case "$FIRMWARE" in omni-emb | \ rt-n15 | \ v22rw-2x2 | \ + w502u | \ wcr-150gn | \ whr-g300n | \ wl-351 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index d0a9ac0..0877a1d 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -51,4 +51,8 @@ case $board in nw718) set_usb_led "nw718:amber:usb" ;; + w502u) + set_usb_led "alfa:blue:usb" + set_wifi_led "rt2800pci-phy0::radio" + ;; esac diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 834a2a7..f98162c 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -19,7 +19,8 @@ ramips_setup_interfaces() argus-atp52b | \ b2c | \ f5d8235-v2 | \ - nw718) + nw718 | \ + w502u) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ;; @@ -86,6 +87,11 @@ ramips_setup_macs() wan_mac=$(ramips_get_mac_binary factory 40) ;; + w502u) + lan_mac=$(ramips_get_mac_binary factory 40) + wan_mac=$(ramips_get_mac_binary factory 46) + ;; + wli-tx4-ag300n) lan_mac=$(ramips_get_mac_binary factory 4) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index eade567..f1d641c 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -21,7 +21,8 @@ preinit_set_mac_address() { ;; hw550-3g |\ nbg-419n |\ - omni-emb) + omni-emb |\ + w502u) mac=$(ramips_get_mac_binary factory 40) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index d197fce..f05fc3d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -101,6 +101,9 @@ ramips_board_name() { *"V22RW-2X2") name="v22rw-2x2" ;; + *"W502U") + name="w502u" + ;; *"WHR-G300N") name="whr-g300n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index aebaf38..6d5d602 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -26,6 +26,7 @@ platform_check_image() { omni-emb | \ rt-g32-b1 | \ rt-n15 | \ + w502u |\ v22rw-2x2 | \ wli-tx4-ag300n | \ whr-g300n) diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 9e48b5c..df6adf4 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -37,6 +37,7 @@ enum ramips_mach_type { RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ + RAMIPS_MACH_W502U, /* ALFA Networks W502U */ RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 3149af4..1bb67e2 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -2,6 +2,11 @@ if RALINK_RT305X menu "Ralink RT350x machine selection" +config RT305X_MACH_W502U + bool "ALFA Networks W502U board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_ARGUS_ATP52B bool "Argus ATP-52B support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 2778f54..25d51fd 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o +obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c new file mode 100644 index 0000000..2c9cd44 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c @@ -0,0 +1,129 @@ +/* + * ALFA Networks W502U board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define W502U_GPIO_LED_USB 13 +#define W502U_GPIO_LED_WPS 14 + +#define W502U_GPIO_BUTTON_WPS 0 +#define W502U_GPIO_BUTTON_RESET 10 + +#define W502U_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition w502u_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "config", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x050000, + .size = 0x0d0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x6d0000, + }, { + .name = "data3g", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x7a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data w502u_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(w502u_partitions), + .parts = w502u_partitions, +#endif +}; + +static struct gpio_led w502u_leds_gpio[] __initdata = { + { + .name = "alfa:blue:usb", + .gpio = W502U_GPIO_LED_USB, + .active_low = 1, + }, + { + .name = "alfa:blue:wps", + .gpio = W502U_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_button w502u_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = W502U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = W502U_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static void __init w502u_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT)); + + rt305x_register_flash(0, &w502u_flash_data); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio), + w502u_leds_gpio); + ramips_register_gpio_buttons(-1, W502U_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(w502u_gpio_buttons), + w502u_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U", + w502u_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index a2845fd..b661cab 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -123,8 +123,10 @@ define Image/Build/Template/GENERIC_4M endef mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware) +kernel_size_8M=851968 +rootfs_size_8M=7208960 define Image/Build/Template/GENERIC_8M - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,851968,7208960) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M)) endef mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) @@ -228,6 +230,10 @@ define Image/Build/Profile/WCR150GN $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN) endef +w502u_cmdline=board=W502U console=ttyS1,115200 +define Image/Build/Profile/W502U + $(call BuildFirmware/Generic,$(1),w502u,$(w502u_cmdline),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M)) +endef mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) mtd_argus_atp52b_kernel_part_size=1179648 @@ -278,6 +284,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/F5D8235V2,$(1)) $(call Image/Build/Profile/HW5503G,$(1)) $(call Image/Build/Profile/MOFI35003GN,$(1)) + $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WR5123GN,$(1)) $(call Image/Build/Profile/WL351,$(1)) endef diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39 index 68d9a23..3f67bc5 100644 --- a/target/linux/ramips/rt305x/config-2.6.39 +++ b/target/linux/ramips/rt305x/config-2.6.39 @@ -105,6 +105,7 @@ CONFIG_RT305X_MACH_OMNI_EMB=y CONFIG_RT305X_MACH_PWH2004=y CONFIG_RT305X_MACH_RT_G32_REVB=y CONFIG_RT305X_MACH_V22RW_2X2=y +CONFIG_RT305X_MACH_W502U=y CONFIG_RT305X_MACH_WCR150GN=y CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_RT305X_MACH_WL351=y |