diff options
| -rw-r--r-- | tools/Makefile | 3 | ||||
| -rw-r--r-- | tools/missing-macros/Makefile | 26 | ||||
| -rw-r--r-- | tools/missing-macros/src/README | 10 | ||||
| -rw-r--r-- | tools/missing-macros/src/m4/lib-ld.m4 | 110 | ||||
| -rw-r--r-- | tools/missing-macros/src/m4/lib-link.m4 | 774 | ||||
| -rw-r--r-- | tools/missing-macros/src/m4/lib-prefix.m4 | 224 |
6 files changed, 1146 insertions, 1 deletions
diff --git a/tools/Makefile b/tools/Makefile index ebcf98c..4f1be20 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -17,7 +17,7 @@ endif tools-y += m4 libtool autoconf automake flex bison pkg-config sed mklibs tools-y += sstrip ipkg-utils genext2fs e2fsprogs mtd-utils mkimage tools-y += firmware-utils patch-cmdline quilt yaffs2 flock -tools-y += xorg-macros xz +tools-y += xorg-macros missing-macros xz tools-$(CONFIG_TARGET_orion_generic) += wrt350nv2-builder upslug2 tools-$(CONFIG_TARGET_x86) += qemu ifneq ($(CONFIG_TARGET_ar71xx),) @@ -52,6 +52,7 @@ $(curdir)/mkimage/compile := $(curdir)/sed/install $(curdir)/qemu/compile := $(curdir)/e2fsprogs/install $(curdir)/upslug2/compile := $(curdir)/automake/install $(curdir)/xorg-macros/compile := $(curdir)/automake/install +$(curdir)/missing-macros/compile := $(curdir)/automake/install $(curdir)/builddirs := $(tools-y) $(tools-dep) $(tools-) $(curdir)/builddirs-default := $(tools-y) diff --git a/tools/missing-macros/Makefile b/tools/missing-macros/Makefile new file mode 100644 index 0000000..779dbfa --- /dev/null +++ b/tools/missing-macros/Makefile @@ -0,0 +1,26 @@ +# +# Copyright (C) 2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=missing-macros +PKG_VERSION:=1 + +include $(INCLUDE_DIR)/host-build.mk + +define Host/Configure +endef + +define Host/Compile +endef + +define Host/Install + $(INSTALL_DIR) $(STAGING_DIR_HOST)/share/aclocal + $(INSTALL_DATA) ./src/m4/*.m4 $(STAGING_DIR_HOST)/share/aclocal/ +endef + +$(eval $(call HostBuild)) diff --git a/tools/missing-macros/src/README b/tools/missing-macros/src/README new file mode 100644 index 0000000..ec48a8f --- /dev/null +++ b/tools/missing-macros/src/README @@ -0,0 +1,10 @@ +The m4/ directory below contains various m4 macros used +by different packages in the OpenWrt feed. + + +From GNU gettext: + + lib-ld.m4 + lib-link.m4 + lib-prefix.m4 + diff --git a/tools/missing-macros/src/m4/lib-ld.m4 b/tools/missing-macros/src/m4/lib-ld.m4 new file mode 100644 index 0000000..ebb3052 --- /dev/null +++ b/tools/missing-macros/src/m4/lib-ld.m4 @@ -0,0 +1,110 @@ +# lib-ld.m4 serial 4 (gettext-0.18) +dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +case `$LD -v 2>&1 </dev/null` in +*GNU* | *'with BFD'*) + acl_cv_prog_gnu_ld=yes ;; +*) + acl_cv_prog_gnu_ld=no ;; +esac]) +with_gnu_ld=$acl_cv_prog_gnu_ld +]) + +dnl From libtool-1.4. Sets the variable LD. +AC_DEFUN([AC_LIB_PROG_LD], +[AC_ARG_WITH([gnu-ld], +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL([acl_cv_path_LD], +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break ;; + *) + test "$with_gnu_ld" != yes && break ;; + esac + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT([$LD]) +else + AC_MSG_RESULT([no]) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) diff --git a/tools/missing-macros/src/m4/lib-link.m4 b/tools/missing-macros/src/m4/lib-link.m4 new file mode 100644 index 0000000..c73bd8e --- /dev/null +++ b/tools/missing-macros/src/m4/lib-link.m4 @@ -0,0 +1,774 @@ +# lib-link.m4 serial 21 (gettext-0.18) +dnl Copyright (C) 2001-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +AC_PREREQ([2.54]) + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + pushdef([Name],[translit([$1],[./-], [___])]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + popdef([NAME]) + popdef([Name]) +]) + +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message]) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. The missing-message +dnl defaults to 'no' and may contain additional hints for the user. +dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} +dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname +dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + pushdef([Name],[translit([$1],[./-], [___])]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS, + dnl because these -l options might require -L options that are present in + dnl LIBS. -l options benefit only from the -L options listed before it. + dnl Otherwise, add it to the front of LIBS, because it may be a static + dnl library that depends on another static library that is present in LIBS. + dnl Static libraries benefit only from the static libraries listed after + dnl it. + case " $LIB[]NAME" in + *" -l"*) LIBS="$LIBS $LIB[]NAME" ;; + *) LIBS="$LIB[]NAME $LIBS" ;; + esac + AC_TRY_LINK([$3], [$4], + [ac_cv_lib[]Name=yes], + [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])']) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + LIB[]NAME[]_PREFIX= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + AC_SUBST([LIB]NAME[_PREFIX]) + popdef([NAME]) + popdef([Name]) +]) + +dnl Determine the platform dependent parameters needed to use rpath: +dnl acl_libext, +dnl acl_shlibext, +dnl acl_hardcode_libdir_flag_spec, +dnl acl_hardcode_libdir_separator, +dnl acl_hardcode_direct, +dnl acl_hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + dnl Tell automake >= 1.10 to complain if config.rpath is missing. + m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE([rpath], + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_FROMPACKAGE(name, package) +dnl declares that libname comes from the given package. The configure file +dnl will then not have a --with-libname-prefix option but a +dnl --with-package-prefix option. Several libraries can come from the same +dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar +dnl macro call that searches for libname. +AC_DEFUN([AC_LIB_FROMPACKAGE], +[ + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_frompackage_]NAME, [$2]) + popdef([NAME]) + pushdef([PACK],[$2]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + define([acl_libsinpackage_]PACKUP, + m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1]) + popdef([PACKUP]) + popdef([PACK]) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found +dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) + pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) + dnl Autoconf >= 2.61 supports dots in --with options. + pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_ARG_WITH(P_A_C_K[-prefix], +[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib + --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + LIB[]NAME[]_PREFIX= + dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been + dnl computed. So it has to be reset here. + HAVE_LIB[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + dnl The same code as in the loop below: + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + dnl First look for a shared library. + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + dnl Then look for a static library. + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$acl_hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = '$1'; then + LIB[]NAME[]_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi + popdef([P_A_C_K]) + popdef([PACKLIBS]) + popdef([PACKUP]) + popdef([PACK]) + popdef([NAME]) +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) + +dnl For those cases where a variable contains several -L and -l options +dnl referring to unknown libraries and directories, this macro determines the +dnl necessary additional linker options for the runtime path. +dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) +dnl sets LDADDVAR to linker options needed together with LIBSVALUE. +dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, +dnl otherwise linking without libtool is assumed. +AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], +[ + AC_REQUIRE([AC_LIB_RPATH]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + $1= + if test "$enable_rpath" != no; then + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode directories into the resulting + dnl binary. + rpathdirs= + next= + for opt in $2; do + if test -n "$next"; then + dir="$next" + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= + else + case $opt in + -L) next=yes ;; + -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` + dnl No need to hardcode the standard /usr/lib. + if test "X$dir" != "X/usr/$acl_libdirstem" \ + && test "X$dir" != "X/usr/$acl_libdirstem2"; then + rpathdirs="$rpathdirs $dir" + fi + next= ;; + *) next= ;; + esac + fi + done + if test "X$rpathdirs" != "X"; then + if test -n ""$3""; then + dnl libtool is used for linking. Use -R options. + for dir in $rpathdirs; do + $1="${$1}${$1:+ }-R$dir" + done + else + dnl The linker is used for linking directly. + if test -n "$acl_hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user + dnl must pass all path elements in one option. + alldirs= + for dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="$flag" + else + dnl The -rpath options are cumulative. + for dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + $1="${$1}${$1:+ }$flag" + done + fi + fi + fi + fi + fi + AC_SUBST([$1]) +]) diff --git a/tools/missing-macros/src/m4/lib-prefix.m4 b/tools/missing-macros/src/m4/lib-prefix.m4 new file mode 100644 index 0000000..1601cea --- /dev/null +++ b/tools/missing-macros/src/m4/lib-prefix.m4 @@ -0,0 +1,224 @@ +# lib-prefix.m4 serial 7 (gettext-0.18) +dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_PREPARE_MULTILIB creates +dnl - a variable acl_libdirstem, containing the basename of the libdir, either +dnl "lib" or "lib64" or "lib/64", +dnl - a variable acl_libdirstem2, as a secondary possible value for +dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or +dnl "lib/amd64". +AC_DEFUN([AC_LIB_PREPARE_MULTILIB], +[ + dnl There is no formal standard regarding lib and lib64. + dnl On glibc systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine + dnl the compiler's default mode by looking at the compiler's library search + dnl path. If at least one of its elements ends in /lib64 or points to a + dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. + dnl Otherwise we use the default, namely "lib". + dnl On Solaris systems, the current practice is that on a system supporting + dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under + dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or + dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. + AC_REQUIRE([AC_CANONICAL_HOST]) + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment + dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>. + dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." + dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the + dnl symlink is missing, so we set acl_libdirstem2 too. + AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], + [AC_EGREP_CPP([sixtyfour bits], [ +#ifdef _LP64 +sixtyfour bits +#endif + ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) + ]) + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" +]) |