diff options
10 files changed, 119 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 2d351d6..bb70fe7 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -69,7 +69,7 @@ get_status_led() { rt-n10-plus) status_led="asus:green:wps" ;; - rt-n56u | wl-330n ) + rt-n56u | wl-330n | wl-330n3g) status_led="asus:blue:power" ;; sl-r7205) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 34821ec..7937d76 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -70,6 +70,7 @@ case "$FIRMWARE" in wcr-150gn | \ whr-g300n | \ wl-330n | \ + wl-330n3g | \ wl-351 | \ wli-tx4-ag300n | \ wr512-3gn | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index bd5de41..b02dfab 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -31,6 +31,7 @@ preinit_set_mac_address() { w306r-v20 |\ w502u |\ wl-330n |\ + wl-330n3g |\ wr6202 |\ xdxrn502j) mac=$(ramips_get_mac_binary factory 40) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 045d952..c20b80c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -59,6 +59,9 @@ ramips_board_name() { *"Asus WL-330N") name="wl-330n" ;; + *"Asus WL-330N3G") + name="wl-330n3g" + ;; *"Aztech HW550-3G") name="hw550-3g" ;; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 08b04f9..b2d9df9 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -30,6 +30,7 @@ enum ramips_mach_type { RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */ RAMIPS_MACH_NW718, /* Netcore NW718 */ RAMIPS_MACH_WL_330N, /* Asus WL-330N */ + RAMIPS_MACH_WL_330N3G, /* Asus WL-330N3G */ /* RT3052 based machines */ RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index b9850a6..d8370ce 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -36,6 +36,11 @@ config RT305X_MACH_WL_330N select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT305X_MACH_WL_330N3G + bool "Asus WL-330N3G board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_HW550_3G bool "Aztech HW550-3G support" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index f5c6aa8..66940cf 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o +obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c new file mode 100644 index 0000000..599b9a9 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c @@ -0,0 +1,100 @@ +/* + * Asus WL_330N3G board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N3G_GPIO_BUTTON_RESET 10 +#define WL_330N3G_GPIO_BUTTON_WPS 0 +#define WL_330N3G_GPIO_LED_3G_BLUE 9 +#define WL_330N3G_GPIO_LED_3G_RED 13 +#define WL_330N3G_GPIO_LED_POWER 11 +#define WL_330N3G_KEYS_POLL_INTERVAL 20 +#define WL_330N3G_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N3G_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n3g_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n3g_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n3g_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n3g_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n3g_leds_gpio[] __initdata = { + { + .name = "asus:blue:3g", + .gpio = WL_330N3G_GPIO_LED_3G_BLUE, + .active_low = 1, + }, { + .name = "asus:red:3g", + .gpio = WL_330N3G_GPIO_LED_3G_RED, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N3G_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n3g_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n3g_spi_slave_info, + ARRAY_SIZE(wl_330n3g_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio), + wl_330n3g_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n3g_gpio_buttons), + wl_330n3g_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_usb(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N3G, "WL_330N3G", "Asus WL-330N3G", + wl_330n3g_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 1330fa3..d3ddb72 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -395,6 +395,10 @@ define Image/Build/Profile/WL_330N $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi) endef +define Image/Build/Profile/WL_330N3G + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi) +endef + define Image/Build/Profile/WL341V3 $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3) endef @@ -441,6 +445,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WL_330N,$(1)) + $(call Image/Build/Profile/WL_330N3G,$(1)) $(call Image/Build/Profile/WL341V3,$(1)) $(call Image/Build/Profile/WL351,$(1)) $(call Image/Build/Profile/WR5123GN,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3 index cc461c3..bea6349 100644 --- a/target/linux/ramips/rt305x/config-3.3 +++ b/target/linux/ramips/rt305x/config-3.3 @@ -121,6 +121,7 @@ CONFIG_RT305X_MACH_WHR_G300N=y CONFIG_RT305X_MACH_WL341V3=y CONFIG_RT305X_MACH_WL351=y CONFIG_RT305X_MACH_WL_330N=y +CONFIG_RT305X_MACH_WL_330N3G=y CONFIG_RT305X_MACH_WR512_3GN=y CONFIG_RT305X_MACH_WR6202=y CONFIG_RT305X_MACH_XDX_RN502J=y |