diff options
11 files changed, 249 insertions, 6 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index cb5d963..f3bd142 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -78,6 +78,9 @@ get_status_led() { dlan-pro-500-wp) status_led="devolo:green:wlan-2g" ;; + dlan-pro-1200-ac) + status_led="devolo:status:wlan" + ;; dragino2) status_led="dragino2:red:system" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 50f7425..fbbfbd7 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -47,6 +47,9 @@ board=$(ar71xx_board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in + dlan-pro-1200-ac) + ath10kcal_extract "art" 20480 2116 + ;; mc-mac1200r) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index cf5c735..d6f7d1a 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -180,6 +180,12 @@ dlan-pro-500-wp) ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none" ;; +dlan-pro-1200-ac) + ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio" + ucidef_set_led_trigger_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0" + ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0" + ;; + gl-inet) ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1" ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 615dbc4..9a0d0a3 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -305,6 +305,12 @@ dlan-pro-500-wp) ucidef_set_interface_lan "eth0 eth1" ;; +dlan-pro-1200-ac) + ucidef_set_interface_lan "eth0" + ucidef_add_switch "switch0" "1" "0" + ucidef_add_switch_vlan "switch0" "0" "0 2 3 4" + ;; + all0305 |\ aw-nr580 |\ bullet-m |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index f323ec3..9d3d2cb 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -426,6 +426,9 @@ ar71xx_board_detect() { *"dLAN pro 500 Wireless+") name="dlan-pro-500-wp" ;; + *"dLAN pro 1200+ WiFi ac") + name="dlan-pro-1200-ac" + ;; *"Dragino v2") name="dragino2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 8b27b6d..41e344c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -209,6 +209,7 @@ platform_check_image() { dir-825-c1 | \ dir-835-a1 | \ dlan-pro-500-wp | \ + dlan-pro-1200-ac | \ dragino2 | \ epg5000 | \ esr1750 | \ diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index 353c10a..0de176e 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_DIR_615_C1=y CONFIG_ATH79_MACH_DIR_615_I1=y CONFIG_ATH79_MACH_DIR_825_B1=y CONFIG_ATH79_MACH_DIR_825_C1=y +CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y CONFIG_ATH79_MACH_DRAGINO2=y CONFIG_ATH79_MACH_EAP300V2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c new file mode 100644 index 0000000..03b9f19 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c @@ -0,0 +1,189 @@ +/* + * devolo dLAN pro 500 Wireless+ support + * + * Copyright (c) 2013-2015 devolo AG + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> +#include <linux/gpio.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE 13 +#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE 21 +#define DLAN_PRO_1200_AC_GPIO_LED_WLAN 12 +#define DLAN_PRO_1200_AC_GPIO_LED_DLAN 14 +#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR 15 + +#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN 20 +#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN 22 +#define DLAN_PRO_1200_AC_GPIO_BTN_RESET 4 +#define DLAN_PRO_1200_AC_GPIO_DLAN_IND 17 +#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND 16 + +#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL) + +#define DLAN_PRO_1200_AC_ART_ADDRESS 0x1fff0000 +#define DLAN_PRO_1200_AC_CALDATA_OFFSET 0x1000 +#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET 0x1002 +#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = { + { + .name = "devolo:status:wlan", + .gpio = DLAN_PRO_1200_AC_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "devolo:status:dlan", + .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN, + .active_low = 1, + }, + { + .name = "devolo:error:dlan", + .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR, + .active_low = 0, + } +}; + +static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = { + { + .desc = "dLAN button", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_1200_AC_GPIO_BTN_DLAN, + .active_low = 1, + }, + { + .desc = "WLAN button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_1200_AC_GPIO_BTN_WLAN, + .active_low = 0, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, + .gpio = DLAN_PRO_1200_AC_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = false, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = { + .mode = 0, + .txclk_delay_en = 0, + .rxclk_delay_en = 0, + .txclk_delay_sel = 0, + .rxclk_delay_sel = 0, +}; + +static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = { + .pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg, + .pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dlan_pro_1200_ac_ar8327_data, + }, +}; + +static void __init dlan_pro_1200_ac_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS); + u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET; + u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio), + dlan_pro_1200_ac_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys), + dlan_pro_1200_ac_gpio_keys); + + /* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */ + gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "dLAN power"); + + /* WLAN power is turned on initially to allow the PCI bus scan to succeed */ + gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "WLAN power"); + + ath79_register_wmac(cal, wifi_mac); + ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2); + + mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info, + ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info)); + + /* GMAC0 is connected to an AR8337 */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x02000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac", + dlan_pro_1200_ac_setup); diff --git a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk index 281c04c..741f5d5 100644 --- a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk +++ b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk @@ -17,3 +17,17 @@ define Profile/dLAN_pro_500_wp/Description Package set optimized for the devolo dLAN pro 500 Wireless+. endef $(eval $(call Profile,dLAN_pro_500_wp)) + +define Profile/dLAN_pro_1200_ac + NAME:=devolo dLAN pro 1200+ WiFi ac + PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \ + open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-plchost \ + open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \ + ebtables hostapd-utils wifitoggle wpad ip-full kmod-ath10k kmod-leds-gpio \ + kmod-ledtrig-gpio +endef + +define Profile/dLAN_pro_1200_ac/Description + Package set optimized for the devolo dLAN pro 1200+ WiFi ac. +endef +$(eval $(call Profile,dLAN_pro_1200_ac)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 81e100f..5d16c06 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1186,6 +1186,7 @@ eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),1 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),6528k(rootfs),7680k@0x70000(firmware),64k(art)ro +dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),14720k(rootfs),15872k@0x70000(firmware),64k(art)ro cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) @@ -2081,6 +2082,7 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,tty $(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) $(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) root=31:5 mem=128M,KRuImage)) $(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) $(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch index 01d7224..2056508 100644 --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,194 @@ +@@ -16,22 +16,195 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -40,6 +40,7 @@ + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ + ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ + ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ ++ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ + ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ + ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ @@ -268,7 +269,7 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -11,62 +75,1018 @@ config ATH79_MACH_AP121 +@@ -11,62 +75,1031 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -627,6 +628,19 @@ + select ATH79_DEV_WMAC + select ATH79_DEV_USB + ++config ATH79_MACH_DLAN_PRO_1200_AC ++ bool "devolo dLAN pro 1200+ WiFi ac support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_NFC ++ select ATH79_DEV_USB ++ +config ATH79_MACH_DRAGINO2 + bool "DRAGINO V2 support" + select SOC_AR933X @@ -1315,7 +1329,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +1116,97 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -1413,7 +1427,7 @@ endmenu config SOC_AR71XX -@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA +@@ -124,7 +1248,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -1425,7 +1439,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -154,6 +1281,11 @@ config ATH79_PCI_ATH9K_FIXUP def_bool n config ATH79_ROUTERBOOT @@ -1439,7 +1453,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,123 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,124 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1461,6 +1475,7 @@ +obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o ++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o +obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o +obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o |