summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/xburst/Makefile4
-rw-r--r--target/linux/xburst/config-3.18 (renamed from target/linux/xburst/config-3.10)66
-rw-r--r--target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch24
-rw-r--r--target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch30
-rw-r--r--target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch2315
-rw-r--r--target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch478
-rw-r--r--target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch22
-rw-r--r--target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch73
-rw-r--r--target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch64
-rw-r--r--target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch842
-rw-r--r--target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch507
-rw-r--r--target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch (renamed from target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch)13
-rw-r--r--target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch (renamed from target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch)19
-rw-r--r--target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch (renamed from target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch)61
-rw-r--r--target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch (renamed from target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch)15
-rw-r--r--target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch (renamed from target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch)26
-rw-r--r--target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch (renamed from target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch)19
-rw-r--r--target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch (renamed from target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch)13
18 files changed, 133 insertions, 4458 deletions
diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile
index fe4143d..258a743 100644
--- a/target/linux/xburst/Makefile
+++ b/target/linux/xburst/Makefile
@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
ARCH:=mipsel
BOARD:=xburst
BOARDNAME:=Ingenic XBurst
-FEATURES:=targz nand ubifs audio broken
+FEATURES:=targz nand ubifs audio
SUBTARGETS:=qi_lb60
-KERNEL_PATCHVER:=3.10
+KERNEL_PATCHVER:=3.18
DEVICE_TYPE=other
diff --git a/target/linux/xburst/config-3.10 b/target/linux/xburst/config-3.18
index 6efb7c2..93f0a7f 100644
--- a/target/linux/xburst/config-3.10
+++ b/target/linux/xburst/config-3.18
@@ -1,12 +1,15 @@
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-# CONFIG_ARPD is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -27,6 +30,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -44,17 +48,20 @@ CONFIG_DMA_JZ4740=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DW_DMAC_CORE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_EXT4_FS=y
CONFIG_FAT_FS=y
CONFIG_FB=y
+CONFIG_FB_CMDLINE=y
CONFIG_FB_JZ4740=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FONTS=y
# CONFIG_FONT_10x18 is not set
+# CONFIG_FONT_6x10 is not set
CONFIG_FONT_6x11=y
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_8x16 is not set
@@ -64,12 +71,14 @@ CONFIG_FONT_6x11=y
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FONT_SUPPORT=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FREEZER=y
CONFIG_FS_MBCACHE=y
+CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -77,40 +86,50 @@ CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
+# CONFIG_HAMRADIO is not set
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_CONSOLE=y
CONFIG_HZ_PERIODIC=y
@@ -134,7 +153,7 @@ CONFIG_IRQ_WORK=y
CONFIG_JBD2=y
CONFIG_JZ4740_QI_LB60=y
CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
+CONFIG_KERNFS=y
CONFIG_KEXEC=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_MATRIX=y
@@ -157,16 +176,13 @@ CONFIG_MACH_JZ4740=y
CONFIG_MFD_CORE=y
CONFIG_MFD_JZ4740_ADC=y
CONFIG_MIPS=y
-CONFIG_MIPS_FPU_EMU=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_JZ4740=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
@@ -178,16 +194,16 @@ CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_JZ4740=y
-# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MTD_SPLIT_SUPPORT=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUSB_PIO_ONLY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NET_DMA is not set
CONFIG_NLS=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_CODEPAGE_1250=y
@@ -227,8 +243,9 @@ CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_NO_IOPORT_MAP is not set
CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PDA_POWER is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PM=y
CONFIG_PM_CLK=y
@@ -254,11 +271,11 @@ CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_JZ4740=y
# CONFIG_SCSI_DMA is not set
-# CONFIG_SENSORS_JZ4740 is not set
CONFIG_SERIO=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SND=y
CONFIG_SND_COMPRESS_OFFLOAD=y
+CONFIG_SND_DMAENGINE_PCM=y
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_JACK=y
CONFIG_SND_JZ4740_SOC=y
@@ -270,10 +287,10 @@ CONFIG_SND_PCM=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_SOC=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_DMAENGINE_PCM=y
+# CONFIG_SND_SOC_FSL_SSI is not set
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
CONFIG_SND_SOC_JZ4740_CODEC=y
CONFIG_SND_TIMER=y
CONFIG_SOUND=y
@@ -295,28 +312,35 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
CONFIG_TICK_CPU_ACCOUNTING=y
-# CONFIG_TINY_PREEMPT_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_XZ=y
CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UIDGID_CONVERTED=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB=y
# CONFIG_USB_AUDIO is not set
CONFIG_USB_COMMON=y
+# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_F_ECM=y
+CONFIG_USB_F_SUBSET=y
CONFIG_USB_GADGET=y
-CONFIG_USB_JZ4740=y
CONFIG_USB_LIBCOMPOSITE=y
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_MUSB_DUAL_ROLE is not set
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_JZ4740=y
+# CONFIG_USB_MUSB_TUSB6010 is not set
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
+CONFIG_USB_U_ETHER=y
CONFIG_VFAT_FS=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_VLAN_8021Q is not set
diff --git a/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch b/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch
deleted file mode 100644
index 0d4ff65..0000000
--- a/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 3e46e1ea552c3cc5fb64dfeab22124a0e8b94495 Mon Sep 17 00:00:00 2001
-From: Paul Cercueil <paul@crapouillou.net>
-Date: Sun, 3 Jun 2012 12:45:23 +0200
-Subject: [PATCH 04/16] MMC: JZ4740: Remove duplicated code.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- drivers/mmc/host/jz4740_mmc.c | 5 -----
- 1 file changed, 5 deletions(-)
-
---- a/drivers/mmc/host/jz4740_mmc.c
-+++ b/drivers/mmc/host/jz4740_mmc.c
-@@ -560,11 +560,6 @@ static irqreturn_t jz_mmc_irq(int irq, v
- if (cmd->data)
- cmd->data->error = -EIO;
- cmd->error = -EIO;
-- } else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR |
-- JZ_MMC_STATUS_CRC_WRITE_ERROR)) {
-- if (cmd->data)
-- cmd->data->error = -EIO;
-- cmd->error = -EIO;
- }
-
- jz4740_mmc_set_irq_enabled(host, irq_reg, false);
diff --git a/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch b/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch
deleted file mode 100644
index 598d518..0000000
--- a/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 81d112d6c0e16fd0136ce2c5f511ba81ed1f23d2 Mon Sep 17 00:00:00 2001
-From: Paul Cercueil <paul@crapouillou.net>
-Date: Sun, 3 Jun 2012 13:07:19 +0200
-Subject: [PATCH 05/16] MMC: JZ4740: Fix handling of read errors.
-
-For no reason, the code handling write errors was implemented while
-the code handling read errors was missing.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- drivers/mmc/host/jz4740_mmc.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mmc/host/jz4740_mmc.c
-+++ b/drivers/mmc/host/jz4740_mmc.c
-@@ -231,6 +231,14 @@ static void jz4740_mmc_transfer_check_st
- host->req->cmd->error = -EIO;
- data->error = -EIO;
- }
-+ } else if (status & JZ_MMC_STATUS_READ_ERROR_MASK) {
-+ if (status & (JZ_MMC_STATUS_TIMEOUT_READ)) {
-+ host->req->cmd->error = -ETIMEDOUT;
-+ data->error = -ETIMEDOUT;
-+ } else {
-+ host->req->cmd->error = -EIO;
-+ data->error = -EIO;
-+ }
- }
- }
-
diff --git a/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch b/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch
deleted file mode 100644
index 88b2b5a..0000000
--- a/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch
+++ /dev/null
@@ -1,2315 +0,0 @@
-From b3e08e29f6f32dfb400374dc96d0a2f61e6adceb Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 24 Apr 2010 12:18:46 +0200
-Subject: [PATCH 08/16] Add jz4740 udc driver
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- drivers/usb/gadget/Kconfig | 8 +
- drivers/usb/gadget/Makefile | 1 +
- drivers/usb/gadget/gadget_chips.h | 1 +
- drivers/usb/gadget/jz4740_udc.c | 2155 +++++++++++++++++++++++++++++++++++++
- drivers/usb/gadget/jz4740_udc.h | 101 ++
- 5 files changed, 2266 insertions(+)
- create mode 100644 drivers/usb/gadget/jz4740_udc.c
- create mode 100644 drivers/usb/gadget/jz4740_udc.h
-
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -192,6 +192,14 @@ config USB_FUSB300
- help
- Faraday usb device controller FUSB300 driver
-
-+config USB_JZ4740
-+ tristate "JZ4740 UDC"
-+ depends on MACH_JZ4740
-+ select USB_GADGET_DUALSPEED
-+ help
-+ Select this to support the Ingenic JZ4740 processor
-+ high speed USB device controller.
-+
- config USB_OMAP
- tristate "OMAP USB Device Controller"
- depends on ARCH_OMAP1
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
- mv_udc-y := mv_udc_core.o
- obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
- obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
-+obj-$(CONFIG_USB_JZ4740) += jz4740_udc.o
-
- # USB Functions
- usb_f_acm-y := f_acm.o
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -29,6 +29,7 @@
- */
- #define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
- #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
-+#define gadget_is_jz4740(g) (!strcmp("ingenic_hsusb", (g)->name))
- #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
- #define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
- #define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.c
-@@ -0,0 +1,2155 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.c
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/*
-+ * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint.
-+ *
-+ * - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk.
-+ * - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/usb.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/clk.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/mach-jz4740/clock.h>
-+
-+#include "jz4740_udc.h"
-+
-+#define JZ_REG_UDC_FADDR 0x00 /* Function Address 8-bit */
-+#define JZ_REG_UDC_POWER 0x01 /* Power Management 8-bit */
-+#define JZ_REG_UDC_INTRIN 0x02 /* Interrupt IN 16-bit */
-+#define JZ_REG_UDC_INTROUT 0x04 /* Interrupt OUT 16-bit */
-+#define JZ_REG_UDC_INTRINE 0x06 /* Intr IN enable 16-bit */
-+#define JZ_REG_UDC_INTROUTE 0x08 /* Intr OUT enable 16-bit */
-+#define JZ_REG_UDC_INTRUSB 0x0a /* Interrupt USB 8-bit */
-+#define JZ_REG_UDC_INTRUSBE 0x0b /* Interrupt USB Enable 8-bit */
-+#define JZ_REG_UDC_FRAME 0x0c /* Frame number 16-bit */
-+#define JZ_REG_UDC_INDEX 0x0e /* Index register 8-bit */
-+#define JZ_REG_UDC_TESTMODE 0x0f /* USB test mode 8-bit */
-+
-+#define JZ_REG_UDC_CSR0 0x12 /* EP0 CSR 8-bit */
-+#define JZ_REG_UDC_INMAXP 0x10 /* EP1-2 IN Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_INCSR 0x12 /* EP1-2 IN CSR LSB 8/16bit */
-+#define JZ_REG_UDC_INCSRH 0x13 /* EP1-2 IN CSR MSB 8-bit */
-+
-+#define JZ_REG_UDC_OUTMAXP 0x14 /* EP1 OUT Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_OUTCSR 0x16 /* EP1 OUT CSR LSB 8/16bit */
-+#define JZ_REG_UDC_OUTCSRH 0x17 /* EP1 OUT CSR MSB 8-bit */
-+#define JZ_REG_UDC_OUTCOUNT 0x18 /* bytes in EP0/1 OUT FIFO 16-bit */
-+
-+#define JZ_REG_UDC_EP_FIFO(x) (4 * (x) + 0x20)
-+
-+#define JZ_REG_UDC_EPINFO 0x78 /* Endpoint information */
-+#define JZ_REG_UDC_RAMINFO 0x79 /* RAM information */
-+
-+#define JZ_REG_UDC_INTR 0x200 /* DMA pending interrupts */
-+#define JZ_REG_UDC_CNTL1 0x204 /* DMA channel 1 control */
-+#define JZ_REG_UDC_ADDR1 0x208 /* DMA channel 1 AHB memory addr */
-+#define JZ_REG_UDC_COUNT1 0x20c /* DMA channel 1 byte count */
-+#define JZ_REG_UDC_CNTL2 0x214 /* DMA channel 2 control */
-+#define JZ_REG_UDC_ADDR2 0x218 /* DMA channel 2 AHB memory addr */
-+#define JZ_REG_UDC_COUNT2 0x21c /* DMA channel 2 byte count */
-+
-+/* Power register bit masks */
-+#define USB_POWER_SUSPENDM 0x01
-+#define USB_POWER_RESUME 0x04
-+#define USB_POWER_HSMODE 0x10
-+#define USB_POWER_HSENAB 0x20
-+#define USB_POWER_SOFTCONN 0x40
-+
-+/* Interrupt register bit masks */
-+#define USB_INTR_SUSPEND 0x01
-+#define USB_INTR_RESUME 0x02
-+#define USB_INTR_RESET 0x04
-+
-+#define USB_INTR_EP0 0x0001
-+#define USB_INTR_INEP1 0x0002
-+#define USB_INTR_INEP2 0x0004
-+#define USB_INTR_OUTEP1 0x0002
-+
-+/* CSR0 bit masks */
-+#define USB_CSR0_OUTPKTRDY 0x01
-+#define USB_CSR0_INPKTRDY 0x02
-+#define USB_CSR0_SENTSTALL 0x04
-+#define USB_CSR0_DATAEND 0x08
-+#define USB_CSR0_SETUPEND 0x10
-+#define USB_CSR0_SENDSTALL 0x20
-+#define USB_CSR0_SVDOUTPKTRDY 0x40
-+#define USB_CSR0_SVDSETUPEND 0x80
-+
-+/* Endpoint CSR register bits */
-+#define USB_INCSRH_AUTOSET 0x80
-+#define USB_INCSRH_ISO 0x40
-+#define USB_INCSRH_MODE 0x20
-+#define USB_INCSRH_DMAREQENAB 0x10
-+#define USB_INCSRH_DMAREQMODE 0x04
-+#define USB_INCSR_CDT 0x40
-+#define USB_INCSR_SENTSTALL 0x20
-+#define USB_INCSR_SENDSTALL 0x10
-+#define USB_INCSR_FF 0x08
-+#define USB_INCSR_UNDERRUN 0x04
-+#define USB_INCSR_FFNOTEMPT 0x02
-+#define USB_INCSR_INPKTRDY 0x01
-+
-+#define USB_OUTCSRH_AUTOCLR 0x80
-+#define USB_OUTCSRH_ISO 0x40
-+#define USB_OUTCSRH_DMAREQENAB 0x20
-+#define USB_OUTCSRH_DNYT 0x10
-+#define USB_OUTCSRH_DMAREQMODE 0x08
-+#define USB_OUTCSR_CDT 0x80
-+#define USB_OUTCSR_SENTSTALL 0x40
-+#define USB_OUTCSR_SENDSTALL 0x20
-+#define USB_OUTCSR_FF 0x10
-+#define USB_OUTCSR_DATAERR 0x08
-+#define USB_OUTCSR_OVERRUN 0x04
-+#define USB_OUTCSR_FFFULL 0x02
-+#define USB_OUTCSR_OUTPKTRDY 0x01
-+
-+/* DMA control bits */
-+#define USB_CNTL_ENA 0x01
-+#define USB_CNTL_DIR_IN 0x02
-+#define USB_CNTL_MODE_1 0x04
-+#define USB_CNTL_INTR_EN 0x08
-+#define USB_CNTL_EP(n) ((n) << 4)
-+#define USB_CNTL_BURST_0 (0 << 9)
-+#define USB_CNTL_BURST_4 (1 << 9)
-+#define USB_CNTL_BURST_8 (2 << 9)
-+#define USB_CNTL_BURST_16 (3 << 9)
-+
-+
-+#ifndef DEBUG
-+# define DEBUG(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_EP0
-+# define NO_STATES
-+# define DEBUG_EP0(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_SETUP
-+# define DEBUG_SETUP(fmt,args...) do {} while(0)
-+#endif
-+
-+/*
-+ * Local declarations.
-+ */
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep);
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr);
-+
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req,
-+ int status);
-+static void pio_irq_enable(struct jz4740_ep *ep);
-+static void pio_irq_disable(struct jz4740_ep *ep);
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver);
-+static void nuke(struct jz4740_ep *ep, int status);
-+static void flush(struct jz4740_ep *ep);
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* inline functions of register read/write/set/clear */
-+
-+static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readb(udc->base + reg);
-+}
-+
-+static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readw(udc->base + reg);
-+}
-+
-+static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readl(udc->base + reg);
-+}
-+
-+static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val)
-+{
-+ writeb(val, udc->base + reg);
-+}
-+
-+static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val)
-+{
-+ writew(val, udc->base + reg);
-+}
-+
-+static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val)
-+{
-+ writel(val, udc->base + reg);
-+}
-+
-+static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) | mask);
-+}
-+
-+static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) | mask);
-+}
-+
-+static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask);
-+}
-+
-+static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) & ~mask);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index)
-+{
-+ usb_writeb(udc, JZ_REG_UDC_INDEX, index);
-+}
-+
-+static inline void jz_udc_select_ep(struct jz4740_ep *ep)
-+{
-+ jz_udc_set_index(ep->dev, ep_index(ep));
-+}
-+
-+static inline int write_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo);
-+
-+ writesl(fifo, buf, length >> 2);
-+ writesb(fifo, &buf[length - (length & 3)], length & 3);
-+
-+ return length;
-+}
-+
-+static int read_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Read %d, fifo %x\n", length, ep->fifo);
-+
-+ readsl(fifo, buf, length >> 2);
-+ readsb(fifo, &buf[length - (length & 3)], length & 3);
-+
-+ return length;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * udc_disable - disable USB device controller
-+ */
-+static void udc_disable(struct jz4740_udc *dev)
-+{
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ udc_set_address(dev, 0);
-+
-+ /* Disable interrupts */
-+ usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);
-+
-+ /* Disable DMA */
-+ usb_writel(dev, JZ_REG_UDC_CNTL1, 0);
-+ usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
-+
-+ /* Disconnect from usb */
-+ usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ /* Disable the USB PHY */
-+ clk_disable_unprepare(dev->clk);
-+
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ return;
-+}
-+
-+/*
-+ * udc_reinit - initialize software state
-+ */
-+static void udc_reinit(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* device/ep0 records init */
-+ INIT_LIST_HEAD(&dev->gadget.ep_list);
-+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ if (i != 0)
-+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-+
-+ INIT_LIST_HEAD(&ep->queue);
-+ ep->desc = 0;
-+ ep->stopped = 0;
-+ }
-+}
-+
-+/* until it's enabled, this UDC should be completely invisible
-+ * to any USB host.
-+ */
-+static void udc_enable(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* UDC state is incorrect - Added by River */
-+ if (dev->state != UDC_STATE_ENABLE) {
-+ return;
-+ }
-+
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* Flush FIFO for each */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ jz_udc_select_ep(ep);
-+ flush(ep);
-+ }
-+
-+ /* Set this bit to allow the UDC entering low-power mode when
-+ * there are no actions on the USB bus.
-+ * UDC still works during this bit was set.
-+ */
-+ jz4740_clock_udc_enable_auto_suspend();
-+
-+ /* Enable the USB PHY */
-+ clk_prepare_enable(dev->clk);
-+
-+ /* Disable interrupts */
-+/* usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/
-+
-+ /* Enable interrupts */
-+ usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0);
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET);
-+ /* Don't enable rest of the interrupts */
-+ /* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2);
-+ usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */
-+
-+ /* Enable SUSPEND */
-+ /* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */
-+
-+ /* Enable HS Mode */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB);
-+
-+ /* Let host detect UDC:
-+ * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this
-+ * transistor on and pull the USBDP pin HIGH.
-+ */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ return;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* keeping it simple:
-+ * - one bus driver, initted first;
-+ * - one function driver, initted second
-+ */
-+
-+/*
-+ * Register entry point for the peripheral controller driver.
-+ */
-+
-+static int jz4740_udc_start(struct usb_gadget *gadget,
-+ struct usb_gadget_driver *driver)
-+{
-+ struct jz4740_udc *udc = container_of(gadget, struct jz4740_udc, gadget);
-+
-+ /* hook up the driver */
-+ udc->driver = driver;
-+
-+
-+ /* then enable host detection and ep0; and we're ready
-+ * for set_configuration as well as eventual disconnect.
-+ */
-+ udc_enable(udc);
-+
-+ DEBUG("%s: registered gadget driver '%s'\n", gadget->name,
-+ driver->driver.name);
-+
-+ return 0;
-+}
-+
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver)
-+{
-+ int i;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* don't disconnect drivers more than once */
-+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-+ driver = 0;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ ep->stopped = 1;
-+
-+ jz_udc_select_ep(ep);
-+ nuke(ep, -ESHUTDOWN);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (driver) {
-+ spin_unlock(&dev->lock);
-+ driver->disconnect(&dev->gadget);
-+ spin_lock(&dev->lock);
-+ }
-+
-+ /* re-init driver-visible data structures */
-+ udc_reinit(dev);
-+}
-+
-+
-+/*
-+ * Unregister entry point for the peripheral controller driver.
-+ */
-+static int jz4740_udc_stop(struct usb_gadget *gadget,
-+ struct usb_gadget_driver *driver)
-+{
-+ struct jz4740_udc *udc = container_of(gadget, struct jz4740_udc, gadget);
-+ unsigned long flags;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ udc->driver = NULL;
-+ stop_activity(udc, driver);
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ udc_disable(udc);
-+
-+ DEBUG("unregistered driver '%s'\n", driver->driver.name);
-+
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/** Write request to FIFO (max write == maxp size)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t max, csr;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
-+
-+ csr = usb_readb(dev, ep->csr);
-+
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ unsigned count;
-+ int is_last, is_short;
-+
-+ count = write_packet(ep, req, max);
-+ usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = is_short = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual)
-+ || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ /* interrupt/iso maxpacket may not fill the fifo */
-+ is_short = unlikely(max < ep_maxpacket(ep));
-+ }
-+
-+ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", is_short ? "/S" : "",
-+ req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue)) {
-+ pio_irq_disable(ep);
-+ }
-+ return 1;
-+ }
-+ } else {
-+ DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
-+ }
-+
-+ return 0;
-+}
-+
-+/** Read to request from FIFO (max read == bytes in fifo)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ unsigned count, is_short;
-+
-+ /* make sure there's a packet in the FIFO. */
-+ csr = usb_readb(dev, ep->csr);
-+ if (!(csr & USB_OUTCSR_OUTPKTRDY)) {
-+ DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* read all bytes from this packet */
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ is_short = (count < ep->ep.maxpacket);
-+
-+ count = read_packet(ep, req, count);
-+
-+ DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ /* Clear OutPktRdy */
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+
-+ if (list_empty(&ep->queue))
-+ pio_irq_disable(ep);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/*
-+ * done - retire a request; caller blocked irqs
-+ * INDEX register is preserved to keep same
-+ */
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status)
-+{
-+ unsigned int stopped = ep->stopped;
-+ uint32_t index;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+ list_del_init(&req->queue);
-+
-+ if (likely(req->req.status == -EINPROGRESS))
-+ req->req.status = status;
-+ else
-+ status = req->req.status;
-+
-+ if (status && status != -ESHUTDOWN)
-+ DEBUG("complete %s req %p stat %d len %u/%u\n",
-+ ep->ep.name, &req->req, status,
-+ req->req.actual, req->req.length);
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ /* Read current index (completion may modify it) */
-+ index = usb_readb(ep->dev, JZ_REG_UDC_INDEX);
-+ spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags);
-+
-+ req->req.complete(&ep->ep, &req->req);
-+
-+ spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags);
-+ /* Restore index */
-+ jz_udc_set_index(ep->dev, index);
-+ ep->stopped = stopped;
-+}
-+
-+static inline unsigned int jz4740_udc_ep_irq_enable_reg(struct jz4740_ep *ep)
-+{
-+ if (ep_is_in(ep))
-+ return JZ_REG_UDC_INTRINE;
-+ else
-+ return JZ_REG_UDC_INTROUTE;
-+}
-+
-+/** Enable EP interrupt */
-+static void pio_irq_enable(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ usb_setw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
-+}
-+
-+/** Disable EP interrupt */
-+static void pio_irq_disable(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ usb_clearw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
-+}
-+
-+/*
-+ * nuke - dequeue ALL requests
-+ */
-+static void nuke(struct jz4740_ep *ep, int status)
-+{
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+
-+ /* Flush FIFO */
-+ flush(ep);
-+
-+ /* called with irqs blocked */
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+ done(ep, req, status);
-+ }
-+
-+ /* Disable IRQ if EP is enabled (has descriptor) */
-+ if (ep->desc)
-+ pio_irq_disable(ep);
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: INDEX register must be set before this call
-+ */
-+static void flush(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name);
-+
-+ switch (ep->type) {
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ usb_setb(ep->dev, ep->csr, USB_INCSR_FF);
-+ break;
-+ case ep_bulk_out:
-+ usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF);
-+ break;
-+ case ep_control:
-+ break;
-+ }
-+}
-+
-+/**
-+ * jz4740_in_epn - handle IN interrupt
-+ */
-+static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ uint32_t csr;
-+ struct jz4740_ep *ep = &dev->ep[ep_idx + 1];
-+ struct jz4740_request *req;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ jz_udc_select_ep(ep);
-+
-+ csr = usb_readb(dev, ep->csr);
-+ DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
-+
-+ if (csr & USB_INCSR_SENTSTALL) {
-+ DEBUG("USB_INCSR_SENTSTALL\n");
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL);
-+ return;
-+ }
-+
-+ if (!ep->desc) {
-+ DEBUG("%s: NO EP DESC\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ if (!list_empty(&ep->queue)) {
-+ req = list_first_entry(&ep->queue, struct jz4740_request, queue);
-+ write_fifo(ep, req);
-+ }
-+}
-+
-+/*
-+ * Bulk OUT (recv)
-+ */
-+static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[ep_idx];
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
-+
-+ jz_udc_select_ep(ep);
-+ if (ep->desc) {
-+ uint32_t csr;
-+
-+ while ((csr = usb_readb(dev, ep->csr)) &
-+ (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) {
-+ DEBUG("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (csr & USB_OUTCSR_SENTSTALL) {
-+ DEBUG("%s: stall sent, flush fifo\n",
-+ __FUNCTION__);
-+ /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
-+ flush(ep);
-+ } else if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req =
-+ list_entry(ep->queue.next,
-+ struct jz4740_request,
-+ queue);
-+
-+ if (!req) {
-+ DEBUG("%s: NULL REQ %d\n",
-+ __FUNCTION__, ep_idx);
-+ break;
-+ } else {
-+ read_fifo(ep, req);
-+ }
-+ }
-+ }
-+ } else {
-+ /* Throw packet away.. */
-+ DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx);
-+ flush(ep);
-+ }
-+}
-+
-+/** Halt specific EP
-+ * Return 0 if success
-+ * NOTE: Sets INDEX register to EP !
-+ */
-+static int jz4740_set_halt(struct usb_ep *_ep, int value)
-+{
-+ struct jz4740_udc *dev;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
-+
-+ if (ep_index(ep) == 0) {
-+ /* EP0 */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL);
-+ } else if (ep_is_in(ep)) {
-+ uint32_t csr = usb_readb(dev, ep->csr);
-+ if (value && ((csr & USB_INCSR_FFNOTEMPT)
-+ || !list_empty(&ep->queue))) {
-+ /*
-+ * Attempts to halt IN endpoints will fail (returning -EAGAIN)
-+ * if any transfer requests are still queued, or if the controller
-+ * FIFO still holds bytes that the host hasnÂ’t collected.
-+ */
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+ DEBUG
-+ ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
-+ (csr & USB_INCSR_FFNOTEMPT),
-+ !list_empty(&ep->queue));
-+ return -EAGAIN;
-+ }
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_INCSR_CDT);
-+ }
-+ } else {
-+
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_OUTCSR_CDT);
-+ }
-+ }
-+
-+ ep->stopped = value;
-+
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
-+
-+ return 0;
-+}
-+
-+
-+static int jz4740_ep_enable(struct usb_ep *_ep,
-+ const struct usb_endpoint_descriptor *desc)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+ unsigned long flags;
-+ uint32_t max, csrh = 0;
-+
-+ DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name);
-+
-+ if (!_ep || !desc)
-+ return -EINVAL;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (ep->desc || ep->type == ep_control
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ep->bEndpointAddress != desc->bEndpointAddress) {
-+ DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* xfer types must match, except that interrupt ~= bulk */
-+ if (ep->bmAttributes != desc->bmAttributes
-+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
-+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-+ DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DEBUG("%s, bogus device state\n", __FUNCTION__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ max = le16_to_cpu(desc->wMaxPacketSize);
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* Configure the endpoint */
-+ jz_udc_select_ep(ep);
-+ if (ep_is_in(ep)) {
-+ usb_writew(dev, JZ_REG_UDC_INMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_INCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_INCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh);
-+ }
-+ else {
-+ usb_writew(dev, JZ_REG_UDC_OUTMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ csrh |= USB_OUTCSRH_DNYT;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_OUTCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh);
-+ }
-+
-+
-+ ep->stopped = 0;
-+ ep->desc = desc;
-+ ep->ep.maxpacket = max;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ /* Reset halt state (does flush) */
-+ jz4740_set_halt(_ep, 0);
-+
-+ DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
-+
-+ return 0;
-+}
-+
-+/** Disable EP
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_ep_disable(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || !ep->desc) {
-+ DEBUG("%s, %s not enabled\n", __FUNCTION__,
-+ _ep ? ep->ep.name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ /* Nuke all pending requests (does flush) */
-+ nuke(ep, -ESHUTDOWN);
-+
-+ /* Disable ep IRQ */
-+ pio_irq_disable(ep);
-+
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
-+ return 0;
-+}
-+
-+static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+
-+ return &req->req;
-+}
-+
-+static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req)
-+{
-+ struct jz4740_request *req;
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ WARN_ON(!list_empty(&req->queue));
-+
-+ kfree(req);
-+}
-+
-+/*--------------------------------------------------------------------*/
-+
-+/** Queue one request
-+ * Kickstart transfer if needed
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req,
-+ gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ if (unlikely
-+ (!_req || !_req->complete || !_req->buf
-+ || !list_empty(&req->queue))) {
-+ DEBUG("%s, bad params\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-+ DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
-+ return -ESHUTDOWN;
-+ }
-+
-+ DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
-+ _req->buf);
-+
-+ spin_lock_irqsave(&dev->lock, dev->lock_flags);
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ /* kickstart this i/o queue? */
-+ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
-+ ep->stopped);
-+ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
-+ uint32_t csr;
-+
-+ if (unlikely(ep_index(ep) == 0)) {
-+ /* EP0 */
-+ list_add_tail(&req->queue, &ep->queue);
-+ jz4740_ep0_kick(dev, ep);
-+ req = 0;
-+ }
-+ else if (ep_is_in(ep)) {
-+ /* EP1 & EP2 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ if (write_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ } else {
-+ /* EP1 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (read_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ }
-+ }
-+
-+ /* pio or dma irq handler advances the queue. */
-+ if (likely(req != 0))
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ spin_unlock_irqrestore(&dev->lock, dev->lock_flags);
-+
-+ return 0;
-+}
-+
-+/* dequeue JUST ONE request */
-+static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_request *req;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || ep->type == ep_control)
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ if (&req->req == _req)
-+ break;
-+ }
-+ if (&req->req != _req) {
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return -EINVAL;
-+ }
-+ done(ep, req, -ECONNRESET);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return 0;
-+}
-+
-+/** Return bytes in EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static int jz4740_fifo_status(struct usb_ep *_ep)
-+{
-+ uint32_t csr;
-+ int count = 0;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
-+
-+ /* LPD can't report unclaimed bytes from IN fifos */
-+ if (ep_is_in(ep))
-+ return -EOPNOTSUPP;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+ jz_udc_select_ep(ep);
-+
-+ csr = usb_readb(ep->dev, ep->csr);
-+ if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
-+ csr & 0x1) {
-+ count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+ }
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ return count;
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static void jz4740_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+ flush(ep);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+}
-+
-+/****************************************************************/
-+/* End Point 0 related functions */
-+/****************************************************************/
-+
-+/* return: 0 = still running, 1 = completed, negative = errno */
-+static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ uint32_t max;
-+ unsigned count;
-+ int is_last;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = ep_maxpacket(ep);
-+
-+ count = write_packet(ep, req, max);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual) || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ }
-+
-+ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline int jz4740_fifo_read(struct jz4740_ep *ep,
-+ unsigned char *cp, int max)
-+{
-+ int bytes;
-+ int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ if (count > max)
-+ count = max;
-+ bytes = count;
-+ while (count--)
-+ *cp++ = usb_readb(ep->dev, ep->fifo);
-+
-+ return bytes;
-+}
-+
-+static inline void jz4740_fifo_write(struct jz4740_ep *ep,
-+ unsigned char *cp, int count)
-+{
-+ DEBUG("fifo_write: %d %d\n", ep_index(ep), count);
-+ while (count--)
-+ usb_writeb(ep->dev, ep->fifo, *cp++);
-+}
-+
-+static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ uint8_t *buf;
-+ unsigned bufferspace, count, is_short;
-+
-+ DEBUG_EP0("%s\n", __FUNCTION__);
-+
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ if (!(csr & USB_CSR0_OUTPKTRDY))
-+ return 0;
-+
-+ buf = req->req.buf + req->req.actual;
-+ prefetchw(buf);
-+ bufferspace = req->req.length - req->req.actual;
-+
-+ /* read all bytes from this packet */
-+ if (likely(csr & USB_CSR0_OUTPKTRDY)) {
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+ req->req.actual += min(count, bufferspace);
-+ } else /* zlp */
-+ count = 0;
-+
-+ is_short = (count < ep->ep.maxpacket);
-+ DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ while (likely(count-- != 0)) {
-+ uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo);
-+
-+ if (unlikely(bufferspace == 0)) {
-+ /* this happens when the driver's buffer
-+ * is smaller than what the host sent.
-+ * discard the extra data.
-+ */
-+ if (req->req.status != -EOVERFLOW)
-+ DEBUG_EP0("%s overflow %d\n", ep->ep.name,
-+ count);
-+ req->req.status = -EOVERFLOW;
-+ } else {
-+ *buf++ = byte;
-+ bufferspace--;
-+ }
-+ }
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/**
-+ * udc_set_address - set the USB address for this device
-+ * @address:
-+ *
-+ * Called from control endpoint function after it decodes a set address setup packet.
-+ */
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address)
-+{
-+ DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
-+
-+ usb_writeb(dev, JZ_REG_UDC_FADDR, address);
-+}
-+
-+/*
-+ * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY)
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY bit
-+ if last set USB_CSR0_DATAEND bit
-+ */
-+static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (req) {
-+ if (req->req.length == 0) {
-+ DEBUG_EP0("ZERO LENGTH OUT!\n");
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ } else if (kickstart) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY));
-+ return;
-+ }
-+ ret = read_fifo_ep0(ep, req);
-+ if (ret) {
-+ /* Done! */
-+ DEBUG_EP0("%s: finished, waiting for status\n",
-+ __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ /* Not done yet.. */
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }
-+ } else {
-+ DEBUG_EP0("NO REQ??!\n");
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_XMIT
-+ */
-+static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret, need_zlp = 0;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (!req) {
-+ DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ if (req->req.length == 0) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return 1;
-+ }
-+
-+ if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) {
-+ /* Next write will end with the packet size, */
-+ /* so we need zero-length-packet */
-+ need_zlp = 1;
-+ }
-+
-+ ret = write_fifo_ep0(ep, req);
-+
-+ if (ret == 1 && !need_zlp) {
-+ /* Last packet */
-+ DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ }
-+
-+ if (need_zlp) {
-+ DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ dev->ep0state = DATA_STATE_NEED_ZLP;
-+ }
-+
-+ return 1;
-+}
-+
-+static int jz4740_handle_get_status(struct jz4740_udc *dev,
-+ struct usb_ctrlrequest *ctrl)
-+{
-+ struct jz4740_ep *ep0 = &dev->ep[0];
-+ struct jz4740_ep *qep;
-+ int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
-+ uint16_t val = 0;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ if (reqtype == USB_RECIP_INTERFACE) {
-+ /* This is not supported.
-+ * And according to the USB spec, this one does nothing..
-+ * Just return 0
-+ */
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
-+ } else if (reqtype == USB_RECIP_DEVICE) {
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
-+ val |= (1 << 0); /* Self powered */
-+ /*val |= (1<<1); *//* Remote wakeup */
-+ } else if (reqtype == USB_RECIP_ENDPOINT) {
-+ int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
-+
-+ DEBUG_SETUP
-+ ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
-+ ep_num, ctrl->wLength);
-+
-+ if (ctrl->wLength > 2 || ep_num > 3)
-+ return -EOPNOTSUPP;
-+
-+ qep = &dev->ep[ep_num];
-+ if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
-+ && ep_index(qep) != 0) {
-+ return -EOPNOTSUPP;
-+ }
-+
-+ jz_udc_select_ep(qep);
-+
-+ /* Return status on next IN token */
-+ switch (qep->type) {
-+ case ep_control:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) ==
-+ USB_CSR0_SENDSTALL;
-+ break;
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) ==
-+ USB_INCSR_SENDSTALL;
-+ break;
-+ case ep_bulk_out:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) ==
-+ USB_OUTCSR_SENDSTALL;
-+ break;
-+ }
-+
-+ /* Back to EP0 index */
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
-+ ctrl->wIndex, val);
-+ } else {
-+ DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
-+ return -EOPNOTSUPP;
-+ }
-+
-+ /* Clear "out packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ /* Put status to FIFO */
-+ jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val));
-+ /* Issue "In packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+
-+ return 0;
-+}
-+
-+/*
-+ * WAIT_FOR_SETUP (OUTPKTRDY)
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits
-+ */
-+static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ struct usb_ctrlrequest ctrl;
-+ int i;
-+
-+ DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Nuke all previous transfers */
-+ nuke(ep, -EPROTO);
-+
-+ /* read control req from fifo (8 bytes) */
-+ jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8);
-+
-+ DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+
-+ /* Set direction of EP0 */
-+ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
-+ ep->bEndpointAddress |= USB_DIR_IN;
-+ } else {
-+ ep->bEndpointAddress &= ~USB_DIR_IN;
-+ }
-+
-+ /* Handle some SETUP packets ourselves */
-+ switch (ctrl.bRequest) {
-+ case USB_REQ_SET_ADDRESS:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
-+ udc_set_address(dev, ctrl.wValue);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+
-+ /* Enable RESUME and SUSPEND interrupts */
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND));
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+ break;
-+
-+ case USB_REQ_GET_STATUS:
-+ if (jz4740_handle_get_status(dev, &ctrl) == 0)
-+ return;
-+
-+ case USB_REQ_CLEAR_FEATURE:
-+ case USB_REQ_SET_FEATURE:
-+ if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
-+ struct jz4740_ep *qep;
-+ int ep_num = (ctrl.wIndex & 0x0f);
-+
-+ /* Support only HALT feature */
-+ if (ctrl.wValue != 0 || ctrl.wLength != 0
-+ || ep_num > 3 || ep_num < 1)
-+ break;
-+
-+ qep = &dev->ep[ep_num];
-+ spin_unlock(&dev->lock);
-+ if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
-+ DEBUG_SETUP("SET_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 1);
-+ } else {
-+ DEBUG_SETUP("CLR_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 0);
-+ }
-+ spin_lock(&dev->lock);
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ /* Reply with a ZLP on next IN token */
-+ usb_setb(dev, JZ_REG_UDC_CSR0,
-+ (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ /* gadget drivers see class/vendor specific requests,
-+ * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
-+ * and more.
-+ */
-+ if (dev->driver) {
-+ /* device-2-host (IN) or no data setup command, process immediately */
-+ spin_unlock(&dev->lock);
-+
-+ i = dev->driver->setup(&dev->gadget, &ctrl);
-+ spin_lock(&dev->lock);
-+
-+ if (unlikely(i < 0)) {
-+ /* setup processing failed, force stall */
-+ DEBUG_SETUP
-+ (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
-+ i);
-+ jz_udc_set_index(dev, 0);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL));
-+
-+ /* ep->stopped = 1; */
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+ else {
-+ DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength);
-+/* if (!ctrl.wLength) {
-+ usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }*/
-+ }
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_NEED_ZLP
-+ */
-+static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+}
-+
-+/*
-+ * handle ep0 interrupt
-+ */
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ uint32_t csr;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ /* Set index 0 */
-+ jz_udc_set_index(dev, 0);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+
-+ DEBUG_EP0("%s: csr = %x state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]);
-+
-+ /*
-+ * if SENT_STALL is set
-+ * - clear the SENT_STALL bit
-+ */
-+ if (csr & USB_CSR0_SENTSTALL) {
-+ DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr);
-+ usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL);
-+ nuke(ep, -ECONNABORTED);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ }
-+
-+ /*
-+ * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear
-+ * - fill EP0 FIFO
-+ * - if last packet
-+ * - set IN_PKT_RDY | DATA_END
-+ * - else
-+ * set IN_PKT_RDY
-+ */
-+ if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) {
-+ DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n",
-+ __FUNCTION__);
-+
-+ switch (dev->ep0state) {
-+ case DATA_STATE_XMIT:
-+ DEBUG_EP0("continue with DATA_STATE_XMIT\n");
-+ jz4740_ep0_in(dev, csr);
-+ return;
-+ case DATA_STATE_NEED_ZLP:
-+ DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
-+ jz4740_ep0_in_zlp(dev, csr);
-+ return;
-+ default:
-+ /* Stall? */
-+// DEBUG_EP0("Odd state!! state = %s\n",
-+// state_names[dev->ep0state]);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ /* nuke(ep, 0); */
-+ /* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */
-+// break;
-+ return;
-+ }
-+ }
-+
-+ /*
-+ * if SETUPEND is set
-+ * - abort the last transfer
-+ * - set SERVICED_SETUP_END_BIT
-+ */
-+ if (csr & USB_CSR0_SETUPEND) {
-+ DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND);
-+ nuke(ep, 0);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+
-+ /*
-+ * if USB_CSR0_OUTPKTRDY is set
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set SVDOUTPKTRDY | DATAEND | SENDSTALL bits
-+ * - else
-+ * set SVDOUTPKTRDY | DATAEND bits
-+ */
-+ if (csr & USB_CSR0_OUTPKTRDY) {
-+
-+ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
-+ csr);
-+
-+ switch (dev->ep0state) {
-+ case WAIT_FOR_SETUP:
-+ DEBUG_EP0("WAIT_FOR_SETUP\n");
-+ jz4740_ep0_setup(dev, csr);
-+ break;
-+
-+ case DATA_STATE_RECV:
-+ DEBUG_EP0("DATA_STATE_RECV\n");
-+ jz4740_ep0_out(dev, csr, 0);
-+ break;
-+
-+ default:
-+ /* send stall? */
-+ DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
-+ dev->ep0state);
-+ break;
-+ }
-+ }
-+}
-+
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep)
-+{
-+ uint32_t csr;
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Clear "out packet ready" */
-+
-+ if (ep_is_in(ep)) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_XMIT;
-+ jz4740_ep0_in(dev, csr);
-+ } else {
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_RECV;
-+ jz4740_ep0_out(dev, csr, 1);
-+ }
-+}
-+
-+/** Handle USB RESET interrupt
-+ */
-+static void jz4740_reset_irq(struct jz4740_udc *dev)
-+{
-+ dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ?
-+ USB_SPEED_HIGH : USB_SPEED_FULL;
-+
-+ DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0,
-+ (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" );
-+}
-+
-+/*
-+ * jz4740 usb device interrupt handler.
-+ */
-+static irqreturn_t jz4740_udc_irq(int irq, void *devid)
-+{
-+ struct jz4740_udc *jz4740_udc = devid;
-+ uint8_t index;
-+
-+ uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */
-+ uint32_t intr_in = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN);
-+ uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT);
-+ uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR);
-+
-+ if (!intr_usb && !intr_in && !intr_out && !intr_dma)
-+ return IRQ_HANDLED;
-+
-+
-+ DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n",
-+ intr_out, intr_in, intr_usb);
-+
-+ spin_lock(&jz4740_udc->lock);
-+ index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX);
-+
-+ /* Check for resume from suspend mode */
-+ if ((intr_usb & USB_INTR_RESUME) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) {
-+ DEBUG("USB resume\n");
-+ jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */
-+ }
-+
-+ /* Check for system interrupts */
-+ if (intr_usb & USB_INTR_RESET) {
-+ DEBUG("USB reset\n");
-+ jz4740_reset_irq(jz4740_udc);
-+ }
-+
-+ /* Check for endpoint 0 interrupt */
-+ if (intr_in & USB_INTR_EP0) {
-+ DEBUG("USB_INTR_EP0 (control)\n");
-+ jz4740_handle_ep0(jz4740_udc, intr_in);
-+ }
-+
-+ /* Check for Bulk-IN DMA interrupt */
-+ if (intr_dma & 0x1) {
-+ int ep_num;
-+ struct jz4740_ep *ep;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf;
-+ ep = &jz4740_udc->ep[ep_num + 1];
-+ jz_udc_select_ep(ep);
-+ usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY);
-+/* jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/
-+ }
-+
-+ /* Check for Bulk-OUT DMA interrupt */
-+ if (intr_dma & 0x2) {
-+ int ep_num;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf;
-+ jz4740_out_epn(jz4740_udc, ep_num, intr_out);
-+ }
-+
-+ /* Check for each configured endpoint interrupt */
-+ if (intr_in & USB_INTR_INEP1) {
-+ DEBUG("USB_INTR_INEP1\n");
-+ jz4740_in_epn(jz4740_udc, 1, intr_in);
-+ }
-+
-+ if (intr_in & USB_INTR_INEP2) {
-+ DEBUG("USB_INTR_INEP2\n");
-+ jz4740_in_epn(jz4740_udc, 2, intr_in);
-+ }
-+
-+ if (intr_out & USB_INTR_OUTEP1) {
-+ DEBUG("USB_INTR_OUTEP1\n");
-+ jz4740_out_epn(jz4740_udc, 1, intr_out);
-+ }
-+
-+ /* Check for suspend mode */
-+ if ((intr_usb & USB_INTR_SUSPEND) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) {
-+ DEBUG("USB suspend\n");
-+ jz4740_udc->driver->suspend(&jz4740_udc->gadget);
-+ /* Host unloaded from us, can do something, such as flushing
-+ the NAND block cache etc. */
-+ }
-+
-+ jz_udc_set_index(jz4740_udc, index);
-+
-+ spin_unlock(&jz4740_udc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget)
-+{
-+ return container_of(gadget, struct jz4740_udc, gadget);
-+}
-+
-+static int jz4740_udc_get_frame(struct usb_gadget *_gadget)
-+{
-+ DEBUG("%s, %p\n", __FUNCTION__, _gadget);
-+ return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME);
-+}
-+
-+static int jz4740_udc_wakeup(struct usb_gadget *_gadget)
-+{
-+ /* host may not have enabled remote wakeup */
-+ /*if ((UDCCS0 & UDCCS0_DRWF) == 0)
-+ return -EHOSTUNREACH;
-+ udc_set_mask_UDCCR(UDCCR_RSM); */
-+ return -ENOTSUPP;
-+}
-+
-+static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on)
-+{
-+ struct jz4740_udc *udc = gadget_to_udc(_gadget);
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (on) {
-+ udc->state = UDC_STATE_ENABLE;
-+ udc_enable(udc);
-+ } else {
-+ udc->state = UDC_STATE_DISABLE;
-+ udc_disable(udc);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+static const struct usb_gadget_ops jz4740_udc_ops = {
-+ .get_frame = jz4740_udc_get_frame,
-+ .wakeup = jz4740_udc_wakeup,
-+ .pullup = jz4740_udc_pullup,
-+ .udc_start = jz4740_udc_start,
-+ .udc_stop = jz4740_udc_stop,
-+};
-+
-+static struct usb_ep_ops jz4740_ep_ops = {
-+ .enable = jz4740_ep_enable,
-+ .disable = jz4740_ep_disable,
-+
-+ .alloc_request = jz4740_alloc_request,
-+ .free_request = jz4740_free_request,
-+
-+ .queue = jz4740_queue,
-+ .dequeue = jz4740_dequeue,
-+
-+ .set_halt = jz4740_set_halt,
-+ .fifo_status = jz4740_fifo_status,
-+ .fifo_flush = jz4740_fifo_flush,
-+};
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct jz4740_udc jz4740_udc_controller = {
-+ .gadget = {
-+ .ops = &jz4740_udc_ops,
-+ .ep0 = &jz4740_udc_controller.ep[0].ep,
-+ .max_speed = USB_SPEED_HIGH,
-+ .name = "jz4740-udc",
-+ .dev = {
-+ .init_name = "gadget",
-+ },
-+ },
-+
-+ /* control endpoint */
-+ .ep[0] = {
-+ .ep = {
-+ .name = "ep0",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EP0_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 0,
-+ .bmAttributes = 0,
-+
-+ .type = ep_control,
-+ .fifo = JZ_REG_UDC_EP_FIFO(0),
-+ .csr = JZ_REG_UDC_CSR0,
-+ },
-+
-+ /* bulk out endpoint */
-+ .ep[1] = {
-+ .ep = {
-+ .name = "ep1out-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_out,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_OUTCSR,
-+ },
-+
-+ /* bulk in endpoint */
-+ .ep[2] = {
-+ .ep = {
-+ .name = "ep1in-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_in,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+
-+ /* interrupt in endpoint */
-+ .ep[3] = {
-+ .ep = {
-+ .name = "ep2in-int",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPINTR_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 2 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_INT,
-+
-+ .type = ep_interrupt,
-+ .fifo = JZ_REG_UDC_EP_FIFO(2),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+};
-+
-+static int jz4740_udc_probe(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *jz4740_udc = &jz4740_udc_controller;
-+ int ret;
-+
-+ spin_lock_init(&jz4740_udc->lock);
-+
-+ jz4740_udc->dev = &pdev->dev;
-+
-+ jz4740_udc->clk = clk_get(&pdev->dev, "udc");
-+ if (IS_ERR(jz4740_udc->clk)) {
-+ ret = PTR_ERR(jz4740_udc->clk);
-+ dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret);
-+ return ret;
-+ }
-+
-+ platform_set_drvdata(pdev, jz4740_udc);
-+
-+ jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -ENOENT;
-+ dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
-+ goto err_clk_put;
-+ }
-+
-+ jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start,
-+ resource_size(jz4740_udc->mem), pdev->name);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to request mmio memory region\n");
-+ goto err_clk_put;
-+ }
-+
-+ jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+
-+ if (!jz4740_udc->base) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
-+ goto err_release_mem_region;
-+ }
-+
-+ jz4740_udc->irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name,
-+ jz4740_udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
-+ goto err_iounmap;
-+ }
-+
-+ ret = usb_add_gadget_udc(&pdev->dev, &jz4740_udc->gadget);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to add gadget: %d\n", ret);
-+ goto err_free_irq;
-+ }
-+
-+/* udc_disable(jz4740_udc);*/
-+ udc_reinit(jz4740_udc);
-+
-+ return 0;
-+
-+err_free_irq:
-+ free_irq(jz4740_udc->irq, pdev);
-+err_iounmap:
-+ iounmap(jz4740_udc->base);
-+err_release_mem_region:
-+ release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+err_clk_put:
-+ clk_put(jz4740_udc->clk);
-+
-+ return ret;
-+}
-+
-+static int jz4740_udc_remove(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *dev = platform_get_drvdata(pdev);
-+
-+ usb_del_gadget_udc(&dev->gadget);
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ udc_disable(dev);
-+
-+ free_irq(dev->irq, dev);
-+ iounmap(dev->base);
-+ release_mem_region(dev->mem->start, resource_size(dev->mem));
-+ clk_put(dev->clk);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int jz4740_udc_suspend(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_disable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static int jz4740_udc_resume(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_enable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static SIMPLE_DEV_PM_OPS(jz4740_udc_pm_ops, jz4740_udc_suspend, jz4740_udc_resume);
-+#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops)
-+
-+#else
-+#define JZ4740_UDC_PM_OPS NULL
-+#endif
-+
-+static struct platform_driver udc_driver = {
-+ .probe = jz4740_udc_probe,
-+ .remove = jz4740_udc_remove,
-+ .driver = {
-+ .name = "jz-udc",
-+ .owner = THIS_MODULE,
-+ .pm = JZ4740_UDC_PM_OPS,
-+ },
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init udc_init (void)
-+{
-+ return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit (void)
-+{
-+ platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("JZ4740 USB Device Controller");
-+MODULE_AUTHOR("Wei Jianli <jlwei@ingenic.cn>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.h
-@@ -0,0 +1,101 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.h
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __USB_GADGET_JZ4740_H__
-+#define __USB_GADGET_JZ4740_H__
-+
-+/*-------------------------------------------------------------------------*/
-+
-+// Max packet size
-+#define EP0_MAXPACKETSIZE 64
-+#define EPBULK_MAXPACKETSIZE 512
-+#define EPINTR_MAXPACKETSIZE 64
-+
-+#define UDC_MAX_ENDPOINTS 4
-+
-+/*-------------------------------------------------------------------------*/
-+
-+enum ep_type {
-+ ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-+};
-+
-+struct jz4740_ep {
-+ struct usb_ep ep;
-+ struct jz4740_udc *dev;
-+
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ uint8_t stopped;
-+ uint8_t bEndpointAddress;
-+ uint8_t bmAttributes;
-+
-+ enum ep_type type;
-+ size_t fifo;
-+ uint32_t csr;
-+
-+ uint32_t reg_addr;
-+ struct list_head queue;
-+};
-+
-+struct jz4740_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+};
-+
-+enum ep0state {
-+ WAIT_FOR_SETUP, /* between STATUS ack and SETUP report */
-+ DATA_STATE_XMIT, /* data tx stage */
-+ DATA_STATE_NEED_ZLP, /* data tx zlp stage */
-+ WAIT_FOR_OUT_STATUS, /* status stages */
-+ DATA_STATE_RECV, /* data rx stage */
-+};
-+
-+/* For function binding with UDC Disable - Added by River */
-+typedef enum {
-+ UDC_STATE_ENABLE = 0,
-+ UDC_STATE_DISABLE,
-+}udc_state_t;
-+
-+struct jz4740_udc {
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct device *dev;
-+ spinlock_t lock;
-+ unsigned long lock_flags;
-+
-+ enum ep0state ep0state;
-+ struct jz4740_ep ep[UDC_MAX_ENDPOINTS];
-+
-+ udc_state_t state;
-+
-+ struct resource *mem;
-+ void __iomem *base;
-+ int irq;
-+
-+ struct clk *clk;
-+};
-+
-+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
-+
-+static inline bool ep_is_in(const struct jz4740_ep *ep)
-+{
-+ return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN;
-+}
-+
-+static inline uint8_t ep_index(const struct jz4740_ep *ep)
-+{
-+ return ep->bEndpointAddress & 0xf;
-+}
-+
-+#endif /* __USB_GADGET_JZ4740_H__ */
diff --git a/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch b/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch
deleted file mode 100644
index e53896b..0000000
--- a/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch
+++ /dev/null
@@ -1,478 +0,0 @@
-From 8c53b6491806a37d6999886d22c34bfed310034c Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Thu, 30 May 2013 18:25:02 +0200
-Subject: [PATCH 11/16] dma: Add a jz4740 dmaengine driver
-
-This patch adds dmaengine support for the JZ4740 DMA controller. For now the
-driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the
-custom JZ4740 DMA API have been converted to the dmaengine API the custom API
-will be removed and direct hardware access will be added to the dmaengine
-driver.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- drivers/dma/Kconfig | 6 +
- drivers/dma/Makefile | 1 +
- drivers/dma/dma-jz4740.c | 433 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 440 insertions(+)
- create mode 100644 drivers/dma/dma-jz4740.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -312,6 +312,12 @@ config MMP_PDMA
- help
- Support the MMP PDMA engine for PXA and MMP platfrom.
-
-+config DMA_JZ4740
-+ tristate "JZ4740 DMA support"
-+ depends on MACH_JZ4740
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+
- config DMA_ENGINE
- bool
-
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
- obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
- obj-$(CONFIG_DMA_OMAP) += omap-dma.o
- obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
-+obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
---- /dev/null
-+++ b/drivers/dma/dma-jz4740.c
-@@ -0,0 +1,433 @@
-+/*
-+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
-+ * JZ4740 DMAC support
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/mach-jz4740/dma.h>
-+
-+#include "virt-dma.h"
-+
-+#define JZ_DMA_NR_CHANS 6
-+
-+struct jz4740_dma_sg {
-+ dma_addr_t addr;
-+ unsigned int len;
-+};
-+
-+struct jz4740_dma_desc {
-+ struct virt_dma_desc vdesc;
-+
-+ enum dma_transfer_direction direction;
-+ bool cyclic;
-+
-+ unsigned int num_sgs;
-+ struct jz4740_dma_sg sg[];
-+};
-+
-+struct jz4740_dmaengine_chan {
-+ struct virt_dma_chan vchan;
-+ struct jz4740_dma_chan *jz_chan;
-+
-+ dma_addr_t fifo_addr;
-+
-+ struct jz4740_dma_desc *desc;
-+ unsigned int next_sg;
-+};
-+
-+struct jz4740_dma_dev {
-+ struct dma_device ddev;
-+
-+ struct jz4740_dmaengine_chan chan[JZ_DMA_NR_CHANS];
-+};
-+
-+static struct jz4740_dmaengine_chan *to_jz4740_dma_chan(struct dma_chan *c)
-+{
-+ return container_of(c, struct jz4740_dmaengine_chan, vchan.chan);
-+}
-+
-+static struct jz4740_dma_desc *to_jz4740_dma_desc(struct virt_dma_desc *vdesc)
-+{
-+ return container_of(vdesc, struct jz4740_dma_desc, vdesc);
-+}
-+
-+static struct jz4740_dma_desc *jz4740_dma_alloc_desc(unsigned int num_sgs)
-+{
-+ return kzalloc(sizeof(struct jz4740_dma_desc) +
-+ sizeof(struct jz4740_dma_sg) * num_sgs, GFP_ATOMIC);
-+}
-+
-+static enum jz4740_dma_width jz4740_dma_width(enum dma_slave_buswidth width)
-+{
-+ switch (width) {
-+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
-+ return JZ4740_DMA_WIDTH_8BIT;
-+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
-+ return JZ4740_DMA_WIDTH_16BIT;
-+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
-+ return JZ4740_DMA_WIDTH_32BIT;
-+ default:
-+ return JZ4740_DMA_WIDTH_32BIT;
-+ }
-+}
-+
-+static enum jz4740_dma_transfer_size jz4740_dma_maxburst(u32 maxburst)
-+{
-+ if (maxburst <= 1)
-+ return JZ4740_DMA_TRANSFER_SIZE_1BYTE;
-+ else if (maxburst <= 3)
-+ return JZ4740_DMA_TRANSFER_SIZE_2BYTE;
-+ else if (maxburst <= 15)
-+ return JZ4740_DMA_TRANSFER_SIZE_4BYTE;
-+ else if (maxburst <= 31)
-+ return JZ4740_DMA_TRANSFER_SIZE_16BYTE;
-+
-+ return JZ4740_DMA_TRANSFER_SIZE_32BYTE;
-+}
-+
-+static int jz4740_dma_slave_config(struct dma_chan *c,
-+ const struct dma_slave_config *config)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ struct jz4740_dma_config jzcfg;
-+
-+ switch (config->direction) {
-+ case DMA_MEM_TO_DEV:
-+ jzcfg.flags = JZ4740_DMA_SRC_AUTOINC;
-+ jzcfg.transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
-+ chan->fifo_addr = config->dst_addr;
-+ break;
-+ case DMA_DEV_TO_MEM:
-+ jzcfg.flags = JZ4740_DMA_DST_AUTOINC;
-+ jzcfg.transfer_size = jz4740_dma_maxburst(config->src_maxburst);
-+ chan->fifo_addr = config->src_addr;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+
-+ jzcfg.src_width = jz4740_dma_width(config->src_addr_width);
-+ jzcfg.dst_width = jz4740_dma_width(config->dst_addr_width);
-+ jzcfg.mode = JZ4740_DMA_MODE_SINGLE;
-+ jzcfg.request_type = config->slave_id;
-+
-+ jz4740_dma_configure(chan->jz_chan, &jzcfg);
-+
-+ return 0;
-+}
-+
-+static int jz4740_dma_terminate_all(struct dma_chan *c)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ jz4740_dma_disable(chan->jz_chan);
-+ chan->desc = NULL;
-+ vchan_get_all_descriptors(&chan->vchan, &head);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ vchan_dma_desc_free_list(&chan->vchan, &head);
-+
-+ return 0;
-+}
-+
-+static int jz4740_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-+ unsigned long arg)
-+{
-+ struct dma_slave_config *config = (struct dma_slave_config *)arg;
-+
-+ switch (cmd) {
-+ case DMA_SLAVE_CONFIG:
-+ return jz4740_dma_slave_config(chan, config);
-+ case DMA_TERMINATE_ALL:
-+ return jz4740_dma_terminate_all(chan);
-+ default:
-+ return -ENOSYS;
-+ }
-+}
-+
-+static int jz4740_dma_start_transfer(struct jz4740_dmaengine_chan *chan)
-+{
-+ dma_addr_t src_addr, dst_addr;
-+ struct virt_dma_desc *vdesc;
-+ struct jz4740_dma_sg *sg;
-+
-+ jz4740_dma_disable(chan->jz_chan);
-+
-+ if (!chan->desc) {
-+ vdesc = vchan_next_desc(&chan->vchan);
-+ if (!vdesc)
-+ return 0;
-+ chan->desc = to_jz4740_dma_desc(vdesc);
-+ chan->next_sg = 0;
-+ }
-+
-+ if (chan->next_sg == chan->desc->num_sgs)
-+ chan->next_sg = 0;
-+
-+ sg = &chan->desc->sg[chan->next_sg];
-+
-+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
-+ src_addr = sg->addr;
-+ dst_addr = chan->fifo_addr;
-+ } else {
-+ src_addr = chan->fifo_addr;
-+ dst_addr = sg->addr;
-+ }
-+ jz4740_dma_set_src_addr(chan->jz_chan, src_addr);
-+ jz4740_dma_set_dst_addr(chan->jz_chan, dst_addr);
-+ jz4740_dma_set_transfer_count(chan->jz_chan, sg->len);
-+
-+ chan->next_sg++;
-+
-+ jz4740_dma_enable(chan->jz_chan);
-+
-+ return 0;
-+}
-+
-+static void jz4740_dma_complete_cb(struct jz4740_dma_chan *jz_chan, int error,
-+ void *devid)
-+{
-+ struct jz4740_dmaengine_chan *chan = devid;
-+
-+ spin_lock(&chan->vchan.lock);
-+ if (chan->desc) {
-+ if (chan->desc && chan->desc->cyclic) {
-+ vchan_cyclic_callback(&chan->desc->vdesc);
-+ } else {
-+ if (chan->next_sg == chan->desc->num_sgs) {
-+ chan->desc = NULL;
-+ vchan_cookie_complete(&chan->desc->vdesc);
-+ }
-+ }
-+ }
-+ jz4740_dma_start_transfer(chan);
-+ spin_unlock(&chan->vchan.lock);
-+}
-+
-+static void jz4740_dma_issue_pending(struct dma_chan *c)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
-+ jz4740_dma_start_transfer(chan);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *jz4740_dma_prep_slave_sg(
-+ struct dma_chan *c, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ struct jz4740_dma_desc *desc;
-+ struct scatterlist *sg;
-+ unsigned int i;
-+
-+ desc = jz4740_dma_alloc_desc(sg_len);
-+ if (!desc)
-+ return NULL;
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ desc->sg[i].addr = sg_dma_address(sg);
-+ desc->sg[i].len = sg_dma_len(sg);
-+ }
-+
-+ desc->num_sgs = sg_len;
-+ desc->direction = direction;
-+ desc->cyclic = false;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic(
-+ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
-+ size_t period_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ struct jz4740_dma_desc *desc;
-+ unsigned int num_periods, i;
-+
-+ if (buf_len % period_len)
-+ return NULL;
-+
-+ num_periods = buf_len / period_len;
-+
-+ desc = jz4740_dma_alloc_desc(num_periods);
-+ if (!desc)
-+ return NULL;
-+
-+ for (i = 0; i < num_periods; i++) {
-+ desc->sg[i].addr = buf_addr;
-+ desc->sg[i].len = period_len;
-+ buf_addr += period_len;
-+ }
-+
-+ desc->num_sgs = num_periods;
-+ desc->direction = direction;
-+ desc->cyclic = true;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static size_t jz4740_dma_desc_residue(struct jz4740_dmaengine_chan *chan,
-+ struct jz4740_dma_desc *desc, unsigned int next_sg)
-+{
-+ size_t residue = 0;
-+ unsigned int i;
-+
-+ residue = 0;
-+
-+ for (i = next_sg; i < desc->num_sgs; i++)
-+ residue += desc->sg[i].len;
-+
-+ if (next_sg != 0)
-+ residue += jz4740_dma_get_residue(chan->jz_chan);
-+
-+ return residue;
-+}
-+
-+static enum dma_status jz4740_dma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie, struct dma_tx_state *state)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ struct virt_dma_desc *vdesc;
-+ enum dma_status status;
-+ unsigned long flags;
-+
-+ status = dma_cookie_status(c, cookie, state);
-+ if (status == DMA_SUCCESS || !state)
-+ return status;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ vdesc = vchan_find_desc(&chan->vchan, cookie);
-+ if (cookie == chan->desc->vdesc.tx.cookie) {
-+ state->residue = jz4740_dma_desc_residue(chan, chan->desc,
-+ chan->next_sg);
-+ } else if (vdesc) {
-+ state->residue = jz4740_dma_desc_residue(chan,
-+ to_jz4740_dma_desc(vdesc), 0);
-+ } else {
-+ state->residue = 0;
-+ }
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ return status;
-+}
-+
-+static int jz4740_dma_alloc_chan_resources(struct dma_chan *c)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+
-+ chan->jz_chan = jz4740_dma_request(chan, NULL);
-+ if (!chan->jz_chan)
-+ return -EBUSY;
-+
-+ jz4740_dma_set_complete_cb(chan->jz_chan, jz4740_dma_complete_cb);
-+
-+ return 0;
-+}
-+
-+static void jz4740_dma_free_chan_resources(struct dma_chan *c)
-+{
-+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+
-+ vchan_free_chan_resources(&chan->vchan);
-+ jz4740_dma_free(chan->jz_chan);
-+ chan->jz_chan = NULL;
-+}
-+
-+static void jz4740_dma_desc_free(struct virt_dma_desc *vdesc)
-+{
-+ kfree(container_of(vdesc, struct jz4740_dma_desc, vdesc));
-+}
-+
-+static int jz4740_dma_probe(struct platform_device *pdev)
-+{
-+ struct jz4740_dmaengine_chan *chan;
-+ struct jz4740_dma_dev *dmadev;
-+ struct dma_device *dd;
-+ unsigned int i;
-+ int ret;
-+
-+ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
-+ if (!dmadev)
-+ return -EINVAL;
-+
-+ dd = &dmadev->ddev;
-+
-+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
-+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-+ dd->device_alloc_chan_resources = jz4740_dma_alloc_chan_resources;
-+ dd->device_free_chan_resources = jz4740_dma_free_chan_resources;
-+ dd->device_tx_status = jz4740_dma_tx_status;
-+ dd->device_issue_pending = jz4740_dma_issue_pending;
-+ dd->device_prep_slave_sg = jz4740_dma_prep_slave_sg;
-+ dd->device_prep_dma_cyclic = jz4740_dma_prep_dma_cyclic;
-+ dd->device_control = jz4740_dma_control;
-+ dd->dev = &pdev->dev;
-+ dd->chancnt = JZ_DMA_NR_CHANS;
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ for (i = 0; i < dd->chancnt; i++) {
-+ chan = &dmadev->chan[i];
-+ chan->vchan.desc_free = jz4740_dma_desc_free;
-+ vchan_init(&chan->vchan, dd);
-+ }
-+
-+ ret = dma_async_device_register(dd);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, dmadev);
-+
-+ return 0;
-+}
-+
-+static int jz4740_dma_remove(struct platform_device *pdev)
-+{
-+ struct jz4740_dma_dev *dmadev = platform_get_drvdata(pdev);
-+
-+ dma_async_device_unregister(&dmadev->ddev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver jz4740_dma_driver = {
-+ .probe = jz4740_dma_probe,
-+ .remove = jz4740_dma_remove,
-+ .driver = {
-+ .name = "jz4740-dma",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+module_platform_driver(jz4740_dma_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-+MODULE_DESCRIPTION("JZ4740 DMA driver");
-+MODULE_LICENSE("GPLv2");
diff --git a/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch b/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch
deleted file mode 100644
index f440a9d..0000000
--- a/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 1a0086ae912b81a1e6c7213e97059c50a7bfe636 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 6 May 2012 01:51:09 +0200
-Subject: [PATCH 12/16] MIPS: JZ4740: Correct clock gate bit for DMA
- controller
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- arch/mips/jz4740/clock.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/jz4740/clock.c
-+++ b/arch/mips/jz4740/clock.c
-@@ -687,7 +687,7 @@ static struct clk jz4740_clock_simple_cl
- [3] = {
- .name = "dma",
- .parent = &jz_clk_high_speed_peripheral.clk,
-- .gate_bit = JZ_CLOCK_GATE_UART0,
-+ .gate_bit = JZ_CLOCK_GATE_DMAC,
- .ops = &jz_clk_simple_ops,
- },
- [4] = {
diff --git a/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch b/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch
deleted file mode 100644
index 027e3ad..0000000
--- a/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From b1ab71156cd49b2389397d3be54b93fe394a1cb2 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Tue, 9 Oct 2012 13:09:57 +0200
-Subject: [PATCH 13/16] MIPS: JZ4740: Acquire and enable DMA controller clock
-
-Previously, it was assumed that the DMA controller clock is not gated
-when the kernel starts running. While that is the power-on state, it is
-safer to not rely on that.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
----
- arch/mips/jz4740/clock.c | 2 +-
- arch/mips/jz4740/dma.c | 24 ++++++++++++++++++++++--
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/arch/mips/jz4740/clock.c
-+++ b/arch/mips/jz4740/clock.c
-@@ -921,4 +921,4 @@ static int jz4740_clock_init(void)
-
- return 0;
- }
--arch_initcall(jz4740_clock_init);
-+postcore_initcall(jz4740_clock_init);
---- a/arch/mips/jz4740/dma.c
-+++ b/arch/mips/jz4740/dma.c
-@@ -16,6 +16,7 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/spinlock.h>
-+#include <linux/clk.h>
- #include <linux/interrupt.h>
-
- #include <linux/dma-mapping.h>
-@@ -268,6 +269,7 @@ static irqreturn_t jz4740_dma_irq(int ir
-
- static int jz4740_dma_init(void)
- {
-+ struct clk *clk;
- unsigned int ret;
-
- jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
-@@ -277,11 +279,29 @@ static int jz4740_dma_init(void)
-
- spin_lock_init(&jz4740_dma_lock);
-
-- ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
-+ clk = clk_get(NULL, "dma");
-+ if (IS_ERR(clk)) {
-+ ret = PTR_ERR(clk);
-+ printk(KERN_ERR "JZ4740 DMA: Failed to request clock: %d\n",
-+ ret);
-+ goto err_iounmap;
-+ }
-
-- if (ret)
-+ ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
-+ if (ret) {
- printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
-+ goto err_clkput;
-+ }
-+
-+ clk_enable(clk);
-+
-+ return 0;
-+
-+err_clkput:
-+ clk_put(clk);
-
-+err_iounmap:
-+ iounmap(jz4740_dma_base);
- return ret;
- }
- arch_initcall(jz4740_dma_init);
diff --git a/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch b/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch
deleted file mode 100644
index f10666d..0000000
--- a/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 734bdfd446b1eba0c54ad07703a192e6093417fd Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Thu, 30 May 2013 18:25:03 +0200
-Subject: [PATCH 14/16] MIPS: jz4740: Register jz4740 DMA device
-
-Register a device for the newly added jz4740 dmaengine driver.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Acked-by: Ralf Baechle <ralf@linux-mips.org>
-[manually edited to align struct assignment]
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- arch/mips/include/asm/mach-jz4740/platform.h | 1 +
- arch/mips/jz4740/board-qi_lb60.c | 1 +
- arch/mips/jz4740/platform.c | 21 +++++++++++++++++++++
- 3 files changed, 23 insertions(+)
-
---- a/arch/mips/include/asm/mach-jz4740/platform.h
-+++ b/arch/mips/include/asm/mach-jz4740/platform.h
-@@ -32,6 +32,7 @@ extern struct platform_device jz4740_cod
- extern struct platform_device jz4740_adc_device;
- extern struct platform_device jz4740_wdt_device;
- extern struct platform_device jz4740_pwm_device;
-+extern struct platform_device jz4740_dma_device;
-
- void jz4740_serial_device_register(void);
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -437,6 +437,7 @@ static struct platform_device *jz_platfo
- &jz4740_rtc_device,
- &jz4740_adc_device,
- &jz4740_pwm_device,
-+ &jz4740_dma_device,
- &qi_lb60_gpio_keys,
- &qi_lb60_pwm_beeper,
- &qi_lb60_charger_device,
---- a/arch/mips/jz4740/platform.c
-+++ b/arch/mips/jz4740/platform.c
-@@ -329,3 +329,24 @@ struct platform_device jz4740_pwm_device
- .name = "jz4740-pwm",
- .id = -1,
- };
-+
-+/* DMA */
-+static struct resource jz4740_dma_resources[] = {
-+ {
-+ .start = JZ4740_DMAC_BASE_ADDR,
-+ .end = JZ4740_DMAC_BASE_ADDR + 0x400 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = JZ4740_IRQ_DMAC,
-+ .end = JZ4740_IRQ_DMAC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+struct platform_device jz4740_dma_device = {
-+ .name = "jz4740-dma",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(jz4740_dma_resources),
-+ .resource = jz4740_dma_resources,
-+};
diff --git a/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch b/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch
deleted file mode 100644
index 0bce0ac..0000000
--- a/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch
+++ /dev/null
@@ -1,842 +0,0 @@
-From 7b91fca454e66ac1bc1fe5b68de0bf55f799bd41 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Thu, 30 May 2013 18:25:05 +0200
-Subject: [PATCH 15/16] MIPS: jz4740: Remove custom DMA API
-
-Now that all users of the custom jz4740 DMA API have been converted to use
-the dmaengine API instead we can remove the custom API and move all the code
-talking to the hardware to the dmaengine driver.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Acked-by: Ralf Baechle <ralf@linux-mips.org>
-Signed-off-by: Vinod Koul <vinod.koul@intel.com>
----
- arch/mips/include/asm/mach-jz4740/dma.h | 56 ------
- arch/mips/jz4740/Makefile | 2 +-
- arch/mips/jz4740/dma.c | 307 -------------------------------
- drivers/dma/dma-jz4740.c | 258 ++++++++++++++++++++++----
- 4 files changed, 222 insertions(+), 401 deletions(-)
- delete mode 100644 arch/mips/jz4740/dma.c
-
---- a/arch/mips/include/asm/mach-jz4740/dma.h
-+++ b/arch/mips/include/asm/mach-jz4740/dma.h
-@@ -16,8 +16,6 @@
- #ifndef __ASM_MACH_JZ4740_DMA_H__
- #define __ASM_MACH_JZ4740_DMA_H__
-
--struct jz4740_dma_chan;
--
- enum jz4740_dma_request_type {
- JZ4740_DMA_TYPE_AUTO_REQUEST = 8,
- JZ4740_DMA_TYPE_UART_TRANSMIT = 20,
-@@ -33,58 +31,4 @@ enum jz4740_dma_request_type {
- JZ4740_DMA_TYPE_SLCD = 30,
- };
-
--enum jz4740_dma_width {
-- JZ4740_DMA_WIDTH_32BIT = 0,
-- JZ4740_DMA_WIDTH_8BIT = 1,
-- JZ4740_DMA_WIDTH_16BIT = 2,
--};
--
--enum jz4740_dma_transfer_size {
-- JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0,
-- JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1,
-- JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2,
-- JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
-- JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
--};
--
--enum jz4740_dma_flags {
-- JZ4740_DMA_SRC_AUTOINC = 0x2,
-- JZ4740_DMA_DST_AUTOINC = 0x1,
--};
--
--enum jz4740_dma_mode {
-- JZ4740_DMA_MODE_SINGLE = 0,
-- JZ4740_DMA_MODE_BLOCK = 1,
--};
--
--struct jz4740_dma_config {
-- enum jz4740_dma_width src_width;
-- enum jz4740_dma_width dst_width;
-- enum jz4740_dma_transfer_size transfer_size;
-- enum jz4740_dma_request_type request_type;
-- enum jz4740_dma_flags flags;
-- enum jz4740_dma_mode mode;
--};
--
--typedef void (*jz4740_dma_complete_callback_t)(struct jz4740_dma_chan *, int, void *);
--
--struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name);
--void jz4740_dma_free(struct jz4740_dma_chan *dma);
--
--void jz4740_dma_configure(struct jz4740_dma_chan *dma,
-- const struct jz4740_dma_config *config);
--
--
--void jz4740_dma_enable(struct jz4740_dma_chan *dma);
--void jz4740_dma_disable(struct jz4740_dma_chan *dma);
--
--void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src);
--void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst);
--void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count);
--
--uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma);
--
--void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
-- jz4740_dma_complete_callback_t cb);
--
- #endif /* __ASM_JZ4740_DMA_H__ */
---- a/arch/mips/jz4740/Makefile
-+++ b/arch/mips/jz4740/Makefile
-@@ -4,7 +4,7 @@
-
- # Object file lists.
-
--obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
-+obj-y += prom.o irq.o time.o reset.o setup.o \
- gpio.o clock.o platform.o timer.o serial.o
-
- obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
---- a/arch/mips/jz4740/dma.c
-+++ /dev/null
-@@ -1,307 +0,0 @@
--/*
-- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-- * JZ4740 SoC DMA support
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License as published by the
-- * Free Software Foundation; either version 2 of the License, or (at your
-- * option) any later version.
-- *
-- * You should have received a copy of the GNU General Public License along
-- * with this program; if not, write to the Free Software Foundation, Inc.,
-- * 675 Mass Ave, Cambridge, MA 02139, USA.
-- *
-- */
--
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/spinlock.h>
--#include <linux/clk.h>
--#include <linux/interrupt.h>
--
--#include <linux/dma-mapping.h>
--#include <asm/mach-jz4740/dma.h>
--#include <asm/mach-jz4740/base.h>
--
--#define JZ_REG_DMA_SRC_ADDR(x) (0x00 + (x) * 0x20)
--#define JZ_REG_DMA_DST_ADDR(x) (0x04 + (x) * 0x20)
--#define JZ_REG_DMA_TRANSFER_COUNT(x) (0x08 + (x) * 0x20)
--#define JZ_REG_DMA_REQ_TYPE(x) (0x0C + (x) * 0x20)
--#define JZ_REG_DMA_STATUS_CTRL(x) (0x10 + (x) * 0x20)
--#define JZ_REG_DMA_CMD(x) (0x14 + (x) * 0x20)
--#define JZ_REG_DMA_DESC_ADDR(x) (0x18 + (x) * 0x20)
--
--#define JZ_REG_DMA_CTRL 0x300
--#define JZ_REG_DMA_IRQ 0x304
--#define JZ_REG_DMA_DOORBELL 0x308
--#define JZ_REG_DMA_DOORBELL_SET 0x30C
--
--#define JZ_DMA_STATUS_CTRL_NO_DESC BIT(31)
--#define JZ_DMA_STATUS_CTRL_DESC_INV BIT(6)
--#define JZ_DMA_STATUS_CTRL_ADDR_ERR BIT(4)
--#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE BIT(3)
--#define JZ_DMA_STATUS_CTRL_HALT BIT(2)
--#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE BIT(1)
--#define JZ_DMA_STATUS_CTRL_ENABLE BIT(0)
--
--#define JZ_DMA_CMD_SRC_INC BIT(23)
--#define JZ_DMA_CMD_DST_INC BIT(22)
--#define JZ_DMA_CMD_RDIL_MASK (0xf << 16)
--#define JZ_DMA_CMD_SRC_WIDTH_MASK (0x3 << 14)
--#define JZ_DMA_CMD_DST_WIDTH_MASK (0x3 << 12)
--#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK (0x7 << 8)
--#define JZ_DMA_CMD_BLOCK_MODE BIT(7)
--#define JZ_DMA_CMD_DESC_VALID BIT(4)
--#define JZ_DMA_CMD_DESC_VALID_MODE BIT(3)
--#define JZ_DMA_CMD_VALID_IRQ_ENABLE BIT(2)
--#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE BIT(1)
--#define JZ_DMA_CMD_LINK_ENABLE BIT(0)
--
--#define JZ_DMA_CMD_FLAGS_OFFSET 22
--#define JZ_DMA_CMD_RDIL_OFFSET 16
--#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
--#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
--#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
--#define JZ_DMA_CMD_MODE_OFFSET 7
--
--#define JZ_DMA_CTRL_PRIORITY_MASK (0x3 << 8)
--#define JZ_DMA_CTRL_HALT BIT(3)
--#define JZ_DMA_CTRL_ADDRESS_ERROR BIT(2)
--#define JZ_DMA_CTRL_ENABLE BIT(0)
--
--
--static void __iomem *jz4740_dma_base;
--static spinlock_t jz4740_dma_lock;
--
--static inline uint32_t jz4740_dma_read(size_t reg)
--{
-- return readl(jz4740_dma_base + reg);
--}
--
--static inline void jz4740_dma_write(size_t reg, uint32_t val)
--{
-- writel(val, jz4740_dma_base + reg);
--}
--
--static inline void jz4740_dma_write_mask(size_t reg, uint32_t val, uint32_t mask)
--{
-- uint32_t val2;
-- val2 = jz4740_dma_read(reg);
-- val2 &= ~mask;
-- val2 |= val;
-- jz4740_dma_write(reg, val2);
--}
--
--struct jz4740_dma_chan {
-- unsigned int id;
-- void *dev;
-- const char *name;
--
-- enum jz4740_dma_flags flags;
-- uint32_t transfer_shift;
--
-- jz4740_dma_complete_callback_t complete_cb;
--
-- unsigned used:1;
--};
--
--#define JZ4740_DMA_CHANNEL(_id) { .id = _id }
--
--struct jz4740_dma_chan jz4740_dma_channels[] = {
-- JZ4740_DMA_CHANNEL(0),
-- JZ4740_DMA_CHANNEL(1),
-- JZ4740_DMA_CHANNEL(2),
-- JZ4740_DMA_CHANNEL(3),
-- JZ4740_DMA_CHANNEL(4),
-- JZ4740_DMA_CHANNEL(5),
--};
--
--struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name)
--{
-- unsigned int i;
-- struct jz4740_dma_chan *dma = NULL;
--
-- spin_lock(&jz4740_dma_lock);
--
-- for (i = 0; i < ARRAY_SIZE(jz4740_dma_channels); ++i) {
-- if (!jz4740_dma_channels[i].used) {
-- dma = &jz4740_dma_channels[i];
-- dma->used = 1;
-- break;
-- }
-- }
--
-- spin_unlock(&jz4740_dma_lock);
--
-- if (!dma)
-- return NULL;
--
-- dma->dev = dev;
-- dma->name = name;
--
-- return dma;
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_request);
--
--void jz4740_dma_configure(struct jz4740_dma_chan *dma,
-- const struct jz4740_dma_config *config)
--{
-- uint32_t cmd;
--
-- switch (config->transfer_size) {
-- case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
-- dma->transfer_shift = 1;
-- break;
-- case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
-- dma->transfer_shift = 2;
-- break;
-- case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
-- dma->transfer_shift = 4;
-- break;
-- case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
-- dma->transfer_shift = 5;
-- break;
-- default:
-- dma->transfer_shift = 0;
-- break;
-- }
--
-- cmd = config->flags << JZ_DMA_CMD_FLAGS_OFFSET;
-- cmd |= config->src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
-- cmd |= config->dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
-- cmd |= config->transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
-- cmd |= config->mode << JZ_DMA_CMD_MODE_OFFSET;
-- cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
--
-- jz4740_dma_write(JZ_REG_DMA_CMD(dma->id), cmd);
-- jz4740_dma_write(JZ_REG_DMA_STATUS_CTRL(dma->id), 0);
-- jz4740_dma_write(JZ_REG_DMA_REQ_TYPE(dma->id), config->request_type);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_configure);
--
--void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src)
--{
-- jz4740_dma_write(JZ_REG_DMA_SRC_ADDR(dma->id), src);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_set_src_addr);
--
--void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst)
--{
-- jz4740_dma_write(JZ_REG_DMA_DST_ADDR(dma->id), dst);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_set_dst_addr);
--
--void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count)
--{
-- count >>= dma->transfer_shift;
-- jz4740_dma_write(JZ_REG_DMA_TRANSFER_COUNT(dma->id), count);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_set_transfer_count);
--
--void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
-- jz4740_dma_complete_callback_t cb)
--{
-- dma->complete_cb = cb;
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_set_complete_cb);
--
--void jz4740_dma_free(struct jz4740_dma_chan *dma)
--{
-- dma->dev = NULL;
-- dma->complete_cb = NULL;
-- dma->used = 0;
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_free);
--
--void jz4740_dma_enable(struct jz4740_dma_chan *dma)
--{
-- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id),
-- JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE,
-- JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC |
-- JZ_DMA_STATUS_CTRL_ENABLE);
--
-- jz4740_dma_write_mask(JZ_REG_DMA_CTRL,
-- JZ_DMA_CTRL_ENABLE,
-- JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_enable);
--
--void jz4740_dma_disable(struct jz4740_dma_chan *dma)
--{
-- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
-- JZ_DMA_STATUS_CTRL_ENABLE);
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_disable);
--
--uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma)
--{
-- uint32_t residue;
-- residue = jz4740_dma_read(JZ_REG_DMA_TRANSFER_COUNT(dma->id));
-- return residue << dma->transfer_shift;
--}
--EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
--
--static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
--{
-- (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
--
-- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
-- JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
--
-- if (dma->complete_cb)
-- dma->complete_cb(dma, 0, dma->dev);
--}
--
--static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)
--{
-- uint32_t irq_status;
-- unsigned int i;
--
-- irq_status = readl(jz4740_dma_base + JZ_REG_DMA_IRQ);
--
-- for (i = 0; i < 6; ++i) {
-- if (irq_status & (1 << i))
-- jz4740_dma_chan_irq(&jz4740_dma_channels[i]);
-- }
--
-- return IRQ_HANDLED;
--}
--
--static int jz4740_dma_init(void)
--{
-- struct clk *clk;
-- unsigned int ret;
--
-- jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
--
-- if (!jz4740_dma_base)
-- return -EBUSY;
--
-- spin_lock_init(&jz4740_dma_lock);
--
-- clk = clk_get(NULL, "dma");
-- if (IS_ERR(clk)) {
-- ret = PTR_ERR(clk);
-- printk(KERN_ERR "JZ4740 DMA: Failed to request clock: %d\n",
-- ret);
-- goto err_iounmap;
-- }
--
-- ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
-- if (ret) {
-- printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
-- goto err_clkput;
-- }
--
-- clk_enable(clk);
--
-- return 0;
--
--err_clkput:
-- clk_put(clk);
--
--err_iounmap:
-- iounmap(jz4740_dma_base);
-- return ret;
--}
--arch_initcall(jz4740_dma_init);
---- a/drivers/dma/dma-jz4740.c
-+++ b/drivers/dma/dma-jz4740.c
-@@ -22,6 +22,8 @@
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/clk.h>
-
- #include <asm/mach-jz4740/dma.h>
-
-@@ -29,6 +31,76 @@
-
- #define JZ_DMA_NR_CHANS 6
-
-+#define JZ_REG_DMA_SRC_ADDR(x) (0x00 + (x) * 0x20)
-+#define JZ_REG_DMA_DST_ADDR(x) (0x04 + (x) * 0x20)
-+#define JZ_REG_DMA_TRANSFER_COUNT(x) (0x08 + (x) * 0x20)
-+#define JZ_REG_DMA_REQ_TYPE(x) (0x0C + (x) * 0x20)
-+#define JZ_REG_DMA_STATUS_CTRL(x) (0x10 + (x) * 0x20)
-+#define JZ_REG_DMA_CMD(x) (0x14 + (x) * 0x20)
-+#define JZ_REG_DMA_DESC_ADDR(x) (0x18 + (x) * 0x20)
-+
-+#define JZ_REG_DMA_CTRL 0x300
-+#define JZ_REG_DMA_IRQ 0x304
-+#define JZ_REG_DMA_DOORBELL 0x308
-+#define JZ_REG_DMA_DOORBELL_SET 0x30C
-+
-+#define JZ_DMA_STATUS_CTRL_NO_DESC BIT(31)
-+#define JZ_DMA_STATUS_CTRL_DESC_INV BIT(6)
-+#define JZ_DMA_STATUS_CTRL_ADDR_ERR BIT(4)
-+#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE BIT(3)
-+#define JZ_DMA_STATUS_CTRL_HALT BIT(2)
-+#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE BIT(1)
-+#define JZ_DMA_STATUS_CTRL_ENABLE BIT(0)
-+
-+#define JZ_DMA_CMD_SRC_INC BIT(23)
-+#define JZ_DMA_CMD_DST_INC BIT(22)
-+#define JZ_DMA_CMD_RDIL_MASK (0xf << 16)
-+#define JZ_DMA_CMD_SRC_WIDTH_MASK (0x3 << 14)
-+#define JZ_DMA_CMD_DST_WIDTH_MASK (0x3 << 12)
-+#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK (0x7 << 8)
-+#define JZ_DMA_CMD_BLOCK_MODE BIT(7)
-+#define JZ_DMA_CMD_DESC_VALID BIT(4)
-+#define JZ_DMA_CMD_DESC_VALID_MODE BIT(3)
-+#define JZ_DMA_CMD_VALID_IRQ_ENABLE BIT(2)
-+#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE BIT(1)
-+#define JZ_DMA_CMD_LINK_ENABLE BIT(0)
-+
-+#define JZ_DMA_CMD_FLAGS_OFFSET 22
-+#define JZ_DMA_CMD_RDIL_OFFSET 16
-+#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
-+#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
-+#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
-+#define JZ_DMA_CMD_MODE_OFFSET 7
-+
-+#define JZ_DMA_CTRL_PRIORITY_MASK (0x3 << 8)
-+#define JZ_DMA_CTRL_HALT BIT(3)
-+#define JZ_DMA_CTRL_ADDRESS_ERROR BIT(2)
-+#define JZ_DMA_CTRL_ENABLE BIT(0)
-+
-+enum jz4740_dma_width {
-+ JZ4740_DMA_WIDTH_32BIT = 0,
-+ JZ4740_DMA_WIDTH_8BIT = 1,
-+ JZ4740_DMA_WIDTH_16BIT = 2,
-+};
-+
-+enum jz4740_dma_transfer_size {
-+ JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0,
-+ JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1,
-+ JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2,
-+ JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
-+ JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
-+};
-+
-+enum jz4740_dma_flags {
-+ JZ4740_DMA_SRC_AUTOINC = 0x2,
-+ JZ4740_DMA_DST_AUTOINC = 0x1,
-+};
-+
-+enum jz4740_dma_mode {
-+ JZ4740_DMA_MODE_SINGLE = 0,
-+ JZ4740_DMA_MODE_BLOCK = 1,
-+};
-+
- struct jz4740_dma_sg {
- dma_addr_t addr;
- unsigned int len;
-@@ -46,9 +118,10 @@ struct jz4740_dma_desc {
-
- struct jz4740_dmaengine_chan {
- struct virt_dma_chan vchan;
-- struct jz4740_dma_chan *jz_chan;
-+ unsigned int id;
-
- dma_addr_t fifo_addr;
-+ unsigned int transfer_shift;
-
- struct jz4740_dma_desc *desc;
- unsigned int next_sg;
-@@ -56,10 +129,19 @@ struct jz4740_dmaengine_chan {
-
- struct jz4740_dma_dev {
- struct dma_device ddev;
-+ void __iomem *base;
-+ struct clk *clk;
-
- struct jz4740_dmaengine_chan chan[JZ_DMA_NR_CHANS];
- };
-
-+static struct jz4740_dma_dev *jz4740_dma_chan_get_dev(
-+ struct jz4740_dmaengine_chan *chan)
-+{
-+ return container_of(chan->vchan.chan.device, struct jz4740_dma_dev,
-+ ddev);
-+}
-+
- static struct jz4740_dmaengine_chan *to_jz4740_dma_chan(struct dma_chan *c)
- {
- return container_of(c, struct jz4740_dmaengine_chan, vchan.chan);
-@@ -70,6 +152,29 @@ static struct jz4740_dma_desc *to_jz4740
- return container_of(vdesc, struct jz4740_dma_desc, vdesc);
- }
-
-+static inline uint32_t jz4740_dma_read(struct jz4740_dma_dev *dmadev,
-+ unsigned int reg)
-+{
-+ return readl(dmadev->base + reg);
-+}
-+
-+static inline void jz4740_dma_write(struct jz4740_dma_dev *dmadev,
-+ unsigned reg, uint32_t val)
-+{
-+ writel(val, dmadev->base + reg);
-+}
-+
-+static inline void jz4740_dma_write_mask(struct jz4740_dma_dev *dmadev,
-+ unsigned int reg, uint32_t val, uint32_t mask)
-+{
-+ uint32_t tmp;
-+
-+ tmp = jz4740_dma_read(dmadev, reg);
-+ tmp &= ~mask;
-+ tmp |= val;
-+ jz4740_dma_write(dmadev, reg, tmp);
-+}
-+
- static struct jz4740_dma_desc *jz4740_dma_alloc_desc(unsigned int num_sgs)
- {
- return kzalloc(sizeof(struct jz4740_dma_desc) +
-@@ -108,30 +213,60 @@ static int jz4740_dma_slave_config(struc
- const struct dma_slave_config *config)
- {
- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-- struct jz4740_dma_config jzcfg;
-+ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
-+ enum jz4740_dma_width src_width;
-+ enum jz4740_dma_width dst_width;
-+ enum jz4740_dma_transfer_size transfer_size;
-+ enum jz4740_dma_flags flags;
-+ uint32_t cmd;
-
- switch (config->direction) {
- case DMA_MEM_TO_DEV:
-- jzcfg.flags = JZ4740_DMA_SRC_AUTOINC;
-- jzcfg.transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
-+ flags = JZ4740_DMA_SRC_AUTOINC;
-+ transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
- chan->fifo_addr = config->dst_addr;
- break;
- case DMA_DEV_TO_MEM:
-- jzcfg.flags = JZ4740_DMA_DST_AUTOINC;
-- jzcfg.transfer_size = jz4740_dma_maxburst(config->src_maxburst);
-+ flags = JZ4740_DMA_DST_AUTOINC;
-+ transfer_size = jz4740_dma_maxburst(config->src_maxburst);
- chan->fifo_addr = config->src_addr;
- break;
- default:
- return -EINVAL;
- }
-
-+ src_width = jz4740_dma_width(config->src_addr_width);
-+ dst_width = jz4740_dma_width(config->dst_addr_width);
-
-- jzcfg.src_width = jz4740_dma_width(config->src_addr_width);
-- jzcfg.dst_width = jz4740_dma_width(config->dst_addr_width);
-- jzcfg.mode = JZ4740_DMA_MODE_SINGLE;
-- jzcfg.request_type = config->slave_id;
-+ switch (transfer_size) {
-+ case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
-+ chan->transfer_shift = 1;
-+ break;
-+ case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
-+ chan->transfer_shift = 2;
-+ break;
-+ case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
-+ chan->transfer_shift = 4;
-+ break;
-+ case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
-+ chan->transfer_shift = 5;
-+ break;
-+ default:
-+ chan->transfer_shift = 0;
-+ break;
-+ }
-
-- jz4740_dma_configure(chan->jz_chan, &jzcfg);
-+ cmd = flags << JZ_DMA_CMD_FLAGS_OFFSET;
-+ cmd |= src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
-+ cmd |= dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
-+ cmd |= transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
-+ cmd |= JZ4740_DMA_MODE_SINGLE << JZ_DMA_CMD_MODE_OFFSET;
-+ cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
-+
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_CMD(chan->id), cmd);
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0);
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_REQ_TYPE(chan->id),
-+ config->slave_id);
-
- return 0;
- }
-@@ -139,11 +274,13 @@ static int jz4740_dma_slave_config(struc
- static int jz4740_dma_terminate_all(struct dma_chan *c)
- {
- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-+ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
- unsigned long flags;
- LIST_HEAD(head);
-
- spin_lock_irqsave(&chan->vchan.lock, flags);
-- jz4740_dma_disable(chan->jz_chan);
-+ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0,
-+ JZ_DMA_STATUS_CTRL_ENABLE);
- chan->desc = NULL;
- vchan_get_all_descriptors(&chan->vchan, &head);
- spin_unlock_irqrestore(&chan->vchan.lock, flags);
-@@ -170,11 +307,13 @@ static int jz4740_dma_control(struct dma
-
- static int jz4740_dma_start_transfer(struct jz4740_dmaengine_chan *chan)
- {
-+ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
- dma_addr_t src_addr, dst_addr;
- struct virt_dma_desc *vdesc;
- struct jz4740_dma_sg *sg;
-
-- jz4740_dma_disable(chan->jz_chan);
-+ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0,
-+ JZ_DMA_STATUS_CTRL_ENABLE);
-
- if (!chan->desc) {
- vdesc = vchan_next_desc(&chan->vchan);
-@@ -196,22 +335,27 @@ static int jz4740_dma_start_transfer(str
- src_addr = chan->fifo_addr;
- dst_addr = sg->addr;
- }
-- jz4740_dma_set_src_addr(chan->jz_chan, src_addr);
-- jz4740_dma_set_dst_addr(chan->jz_chan, dst_addr);
-- jz4740_dma_set_transfer_count(chan->jz_chan, sg->len);
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_SRC_ADDR(chan->id), src_addr);
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_DST_ADDR(chan->id), dst_addr);
-+ jz4740_dma_write(dmadev, JZ_REG_DMA_TRANSFER_COUNT(chan->id),
-+ sg->len >> chan->transfer_shift);
-
- chan->next_sg++;
-
-- jz4740_dma_enable(chan->jz_chan);
-+ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id),
-+ JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE,
-+ JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC |
-+ JZ_DMA_STATUS_CTRL_ENABLE);
-+
-+ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_CTRL,
-+ JZ_DMA_CTRL_ENABLE,
-+ JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE);
-
- return 0;
- }
-
--static void jz4740_dma_complete_cb(struct jz4740_dma_chan *jz_chan, int error,
-- void *devid)
-+static void jz4740_dma_chan_irq(struct jz4740_dmaengine_chan *chan)
- {
-- struct jz4740_dmaengine_chan *chan = devid;
--
- spin_lock(&chan->vchan.lock);
- if (chan->desc) {
- if (chan->desc && chan->desc->cyclic) {
-@@ -227,6 +371,28 @@ static void jz4740_dma_complete_cb(struc
- spin_unlock(&chan->vchan.lock);
- }
-
-+static irqreturn_t jz4740_dma_irq(int irq, void *devid)
-+{
-+ struct jz4740_dma_dev *dmadev = devid;
-+ uint32_t irq_status;
-+ unsigned int i;
-+
-+ irq_status = readl(dmadev->base + JZ_REG_DMA_IRQ);
-+
-+ for (i = 0; i < 6; ++i) {
-+ if (irq_status & (1 << i)) {
-+ jz4740_dma_write_mask(dmadev,
-+ JZ_REG_DMA_STATUS_CTRL(i), 0,
-+ JZ_DMA_STATUS_CTRL_ENABLE |
-+ JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
-+
-+ jz4740_dma_chan_irq(&dmadev->chan[i]);
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
- static void jz4740_dma_issue_pending(struct dma_chan *c)
- {
- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
-@@ -298,7 +464,8 @@ static struct dma_async_tx_descriptor *j
- static size_t jz4740_dma_desc_residue(struct jz4740_dmaengine_chan *chan,
- struct jz4740_dma_desc *desc, unsigned int next_sg)
- {
-- size_t residue = 0;
-+ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
-+ unsigned int residue, count;
- unsigned int i;
-
- residue = 0;
-@@ -306,8 +473,11 @@ static size_t jz4740_dma_desc_residue(st
- for (i = next_sg; i < desc->num_sgs; i++)
- residue += desc->sg[i].len;
-
-- if (next_sg != 0)
-- residue += jz4740_dma_get_residue(chan->jz_chan);
-+ if (next_sg != 0) {
-+ count = jz4740_dma_read(dmadev,
-+ JZ_REG_DMA_TRANSFER_COUNT(chan->id));
-+ residue += count << chan->transfer_shift;
-+ }
-
- return residue;
- }
-@@ -342,24 +512,12 @@ static enum dma_status jz4740_dma_tx_sta
-
- static int jz4740_dma_alloc_chan_resources(struct dma_chan *c)
- {
-- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
--
-- chan->jz_chan = jz4740_dma_request(chan, NULL);
-- if (!chan->jz_chan)
-- return -EBUSY;
--
-- jz4740_dma_set_complete_cb(chan->jz_chan, jz4740_dma_complete_cb);
--
- return 0;
- }
-
- static void jz4740_dma_free_chan_resources(struct dma_chan *c)
- {
-- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
--
-- vchan_free_chan_resources(&chan->vchan);
-- jz4740_dma_free(chan->jz_chan);
-- chan->jz_chan = NULL;
-+ vchan_free_chan_resources(to_virt_chan(c));
- }
-
- static void jz4740_dma_desc_free(struct virt_dma_desc *vdesc)
-@@ -373,7 +531,9 @@ static int jz4740_dma_probe(struct platf
- struct jz4740_dma_dev *dmadev;
- struct dma_device *dd;
- unsigned int i;
-+ struct resource *res;
- int ret;
-+ int irq;
-
- dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
- if (!dmadev)
-@@ -381,6 +541,17 @@ static int jz4740_dma_probe(struct platf
-
- dd = &dmadev->ddev;
-
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ dmadev->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(dmadev->base))
-+ return PTR_ERR(dmadev->base);
-+
-+ dmadev->clk = clk_get(&pdev->dev, "dma");
-+ if (IS_ERR(dmadev->clk))
-+ return PTR_ERR(dmadev->clk);
-+
-+ clk_prepare_enable(dmadev->clk);
-+
- dma_cap_set(DMA_SLAVE, dd->cap_mask);
- dma_cap_set(DMA_CYCLIC, dd->cap_mask);
- dd->device_alloc_chan_resources = jz4740_dma_alloc_chan_resources;
-@@ -396,6 +567,7 @@ static int jz4740_dma_probe(struct platf
-
- for (i = 0; i < dd->chancnt; i++) {
- chan = &dmadev->chan[i];
-+ chan->id = i;
- chan->vchan.desc_free = jz4740_dma_desc_free;
- vchan_init(&chan->vchan, dd);
- }
-@@ -404,16 +576,28 @@ static int jz4740_dma_probe(struct platf
- if (ret)
- return ret;
-
-+ irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev);
-+ if (ret)
-+ goto err_unregister;
-+
- platform_set_drvdata(pdev, dmadev);
-
- return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+ return ret;
- }
-
- static int jz4740_dma_remove(struct platform_device *pdev)
- {
- struct jz4740_dma_dev *dmadev = platform_get_drvdata(pdev);
-+ int irq = platform_get_irq(pdev, 0);
-
-+ free_irq(irq, dmadev);
- dma_async_device_unregister(&dmadev->ddev);
-+ clk_disable_unprepare(dmadev->clk);
-
- return 0;
- }
diff --git a/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch b/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch
deleted file mode 100644
index 1fb3731..0000000
--- a/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch
+++ /dev/null
@@ -1,507 +0,0 @@
-From a20f54fdd500e5bccc9bd1ca4ac9f150addf2e64 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 27 Apr 2013 21:26:30 +0200
-Subject: [PATCH 16/16] ASoC: jz4740: Use the generic dmaengine PCM driver
-
-Since there is a dmaengine driver for the jz4740 DMA controller now we can use
-the generic dmaengine PCM driver instead of a custom one.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
-Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
----
- sound/soc/jz4740/Kconfig | 1 +
- sound/soc/jz4740/jz4740-i2s.c | 48 +++----
- sound/soc/jz4740/jz4740-pcm.c | 310 ++---------------------------------------
- sound/soc/jz4740/jz4740-pcm.h | 20 ---
- 4 files changed, 27 insertions(+), 352 deletions(-)
- delete mode 100644 sound/soc/jz4740/jz4740-pcm.h
-
---- a/sound/soc/jz4740/Kconfig
-+++ b/sound/soc/jz4740/Kconfig
-@@ -1,6 +1,7 @@
- config SND_JZ4740_SOC
- tristate "SoC Audio for Ingenic JZ4740 SoC"
- depends on MACH_JZ4740 && SND_SOC
-+ select SND_SOC_GENERIC_DMAENGINE_PCM
- help
- Say Y or M if you want to add support for codecs attached to
- the JZ4740 I2S interface. You will also need to select the audio
---- a/sound/soc/jz4740/jz4740-i2s.c
-+++ b/sound/soc/jz4740/jz4740-i2s.c
-@@ -29,9 +29,12 @@
- #include <sound/pcm_params.h>
- #include <sound/soc.h>
- #include <sound/initval.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <asm/mach-jz4740/dma.h>
-
- #include "jz4740-i2s.h"
--#include "jz4740-pcm.h"
-+
-
- #define JZ_REG_AIC_CONF 0x00
- #define JZ_REG_AIC_CTRL 0x04
-@@ -89,8 +92,8 @@ struct jz4740_i2s {
- struct clk *clk_aic;
- struct clk *clk_i2s;
-
-- struct jz4740_pcm_config pcm_config_playback;
-- struct jz4740_pcm_config pcm_config_capture;
-+ struct snd_dmaengine_dai_dma_data playback_dma_data;
-+ struct snd_dmaengine_dai_dma_data capture_dma_data;
- };
-
- static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s,
-@@ -233,8 +236,6 @@ static int jz4740_i2s_hw_params(struct s
- struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
- {
- struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-- enum jz4740_dma_width dma_width;
-- struct jz4740_pcm_config *pcm_config;
- unsigned int sample_size;
- uint32_t ctrl;
-
-@@ -243,11 +244,9 @@ static int jz4740_i2s_hw_params(struct s
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- sample_size = 0;
-- dma_width = JZ4740_DMA_WIDTH_8BIT;
- break;
- case SNDRV_PCM_FORMAT_S16:
- sample_size = 1;
-- dma_width = JZ4740_DMA_WIDTH_16BIT;
- break;
- default:
- return -EINVAL;
-@@ -260,22 +259,13 @@ static int jz4740_i2s_hw_params(struct s
- ctrl |= JZ_AIC_CTRL_MONO_TO_STEREO;
- else
- ctrl &= ~JZ_AIC_CTRL_MONO_TO_STEREO;
--
-- pcm_config = &i2s->pcm_config_playback;
-- pcm_config->dma_config.dst_width = dma_width;
--
- } else {
- ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK;
- ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET;
--
-- pcm_config = &i2s->pcm_config_capture;
-- pcm_config->dma_config.src_width = dma_width;
- }
-
- jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
-
-- snd_soc_dai_set_dma_data(dai, substream, pcm_config);
--
- return 0;
- }
-
-@@ -342,25 +332,19 @@ static int jz4740_i2s_resume(struct snd_
-
- static void jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s)
- {
-- struct jz4740_dma_config *dma_config;
-+ struct snd_dmaengine_dai_dma_data *dma_data;
-
- /* Playback */
-- dma_config = &i2s->pcm_config_playback.dma_config;
-- dma_config->src_width = JZ4740_DMA_WIDTH_32BIT;
-- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
-- dma_config->request_type = JZ4740_DMA_TYPE_AIC_TRANSMIT;
-- dma_config->flags = JZ4740_DMA_SRC_AUTOINC;
-- dma_config->mode = JZ4740_DMA_MODE_SINGLE;
-- i2s->pcm_config_playback.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
-+ dma_data = &i2s->playback_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = JZ4740_DMA_TYPE_AIC_TRANSMIT;
-+ dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
-
- /* Capture */
-- dma_config = &i2s->pcm_config_capture.dma_config;
-- dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT;
-- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
-- dma_config->request_type = JZ4740_DMA_TYPE_AIC_RECEIVE;
-- dma_config->flags = JZ4740_DMA_DST_AUTOINC;
-- dma_config->mode = JZ4740_DMA_MODE_SINGLE;
-- i2s->pcm_config_capture.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
-+ dma_data = &i2s->capture_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = JZ4740_DMA_TYPE_AIC_RECEIVE;
-+ dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
- }
-
- static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
-@@ -371,6 +355,8 @@ static int jz4740_i2s_dai_probe(struct s
- clk_enable(i2s->clk_aic);
-
- jz4740_i2c_init_pcm_config(i2s);
-+ dai->playback_dma_data = &i2s->playback_dma_data;
-+ dai->capture_dma_data = &i2s->capture_dma_data;
-
- conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) |
- (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) |
---- a/sound/soc/jz4740/jz4740-pcm.c
-+++ b/sound/soc/jz4740/jz4740-pcm.c
-@@ -19,38 +19,14 @@
- #include <linux/platform_device.h>
- #include <linux/slab.h>
-
--#include <linux/dma-mapping.h>
-+#include <sound/dmaengine_pcm.h>
-
--#include <sound/core.h>
--#include <sound/pcm.h>
--#include <sound/pcm_params.h>
--#include <sound/soc.h>
--
--#include <asm/mach-jz4740/dma.h>
--#include "jz4740-pcm.h"
--
--struct jz4740_runtime_data {
-- unsigned long dma_period;
-- dma_addr_t dma_start;
-- dma_addr_t dma_pos;
-- dma_addr_t dma_end;
--
-- struct jz4740_dma_chan *dma;
--
-- dma_addr_t fifo_addr;
--};
--
--/* identify hardware playback capabilities */
- static const struct snd_pcm_hardware jz4740_pcm_hardware = {
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER,
- .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
--
-- .rates = SNDRV_PCM_RATE_8000_48000,
-- .channels_min = 1,
-- .channels_max = 2,
- .period_bytes_min = 16,
- .period_bytes_max = 2 * PAGE_SIZE,
- .periods_min = 2,
-@@ -59,290 +35,22 @@ static const struct snd_pcm_hardware jz4
- .fifo_size = 32,
- };
-
--static void jz4740_pcm_start_transfer(struct jz4740_runtime_data *prtd,
-- struct snd_pcm_substream *substream)
--{
-- unsigned long count;
--
-- if (prtd->dma_pos == prtd->dma_end)
-- prtd->dma_pos = prtd->dma_start;
--
-- if (prtd->dma_pos + prtd->dma_period > prtd->dma_end)
-- count = prtd->dma_end - prtd->dma_pos;
-- else
-- count = prtd->dma_period;
--
-- jz4740_dma_disable(prtd->dma);
--
-- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-- jz4740_dma_set_src_addr(prtd->dma, prtd->dma_pos);
-- jz4740_dma_set_dst_addr(prtd->dma, prtd->fifo_addr);
-- } else {
-- jz4740_dma_set_src_addr(prtd->dma, prtd->fifo_addr);
-- jz4740_dma_set_dst_addr(prtd->dma, prtd->dma_pos);
-- }
--
-- jz4740_dma_set_transfer_count(prtd->dma, count);
--
-- prtd->dma_pos += count;
--
-- jz4740_dma_enable(prtd->dma);
--}
--
--static void jz4740_pcm_dma_transfer_done(struct jz4740_dma_chan *dma, int err,
-- void *dev_id)
--{
-- struct snd_pcm_substream *substream = dev_id;
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd = runtime->private_data;
--
-- snd_pcm_period_elapsed(substream);
--
-- jz4740_pcm_start_transfer(prtd, substream);
--}
--
--static int jz4740_pcm_hw_params(struct snd_pcm_substream *substream,
-- struct snd_pcm_hw_params *params)
--{
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd = runtime->private_data;
-- struct snd_soc_pcm_runtime *rtd = substream->private_data;
-- struct jz4740_pcm_config *config;
--
-- config = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
--
-- if (!config)
-- return 0;
--
-- if (!prtd->dma) {
-- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-- prtd->dma = jz4740_dma_request(substream, "PCM Capture");
-- else
-- prtd->dma = jz4740_dma_request(substream, "PCM Playback");
-- }
--
-- if (!prtd->dma)
-- return -EBUSY;
--
-- jz4740_dma_configure(prtd->dma, &config->dma_config);
-- prtd->fifo_addr = config->fifo_addr;
--
-- jz4740_dma_set_complete_cb(prtd->dma, jz4740_pcm_dma_transfer_done);
--
-- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-- runtime->dma_bytes = params_buffer_bytes(params);
--
-- prtd->dma_period = params_period_bytes(params);
-- prtd->dma_start = runtime->dma_addr;
-- prtd->dma_pos = prtd->dma_start;
-- prtd->dma_end = prtd->dma_start + runtime->dma_bytes;
--
-- return 0;
--}
--
--static int jz4740_pcm_hw_free(struct snd_pcm_substream *substream)
--{
-- struct jz4740_runtime_data *prtd = substream->runtime->private_data;
--
-- snd_pcm_set_runtime_buffer(substream, NULL);
-- if (prtd->dma) {
-- jz4740_dma_free(prtd->dma);
-- prtd->dma = NULL;
-- }
--
-- return 0;
--}
--
--static int jz4740_pcm_prepare(struct snd_pcm_substream *substream)
--{
-- struct jz4740_runtime_data *prtd = substream->runtime->private_data;
--
-- if (!prtd->dma)
-- return -EBUSY;
--
-- prtd->dma_pos = prtd->dma_start;
--
-- return 0;
--}
--
--static int jz4740_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
--{
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd = runtime->private_data;
--
-- switch (cmd) {
-- case SNDRV_PCM_TRIGGER_START:
-- case SNDRV_PCM_TRIGGER_RESUME:
-- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-- jz4740_pcm_start_transfer(prtd, substream);
-- break;
-- case SNDRV_PCM_TRIGGER_STOP:
-- case SNDRV_PCM_TRIGGER_SUSPEND:
-- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-- jz4740_dma_disable(prtd->dma);
-- break;
-- default:
-- break;
-- }
--
-- return 0;
--}
--
--static snd_pcm_uframes_t jz4740_pcm_pointer(struct snd_pcm_substream *substream)
--{
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd = runtime->private_data;
-- unsigned long byte_offset;
-- snd_pcm_uframes_t offset;
-- struct jz4740_dma_chan *dma = prtd->dma;
--
-- /* prtd->dma_pos points to the end of the current transfer. So by
-- * subtracting prdt->dma_start we get the offset to the end of the
-- * current period in bytes. By subtracting the residue of the transfer
-- * we get the current offset in bytes. */
-- byte_offset = prtd->dma_pos - prtd->dma_start;
-- byte_offset -= jz4740_dma_get_residue(dma);
--
-- offset = bytes_to_frames(runtime, byte_offset);
-- if (offset >= runtime->buffer_size)
-- offset = 0;
--
-- return offset;
--}
--
--static int jz4740_pcm_open(struct snd_pcm_substream *substream)
--{
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd;
--
-- prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
-- if (prtd == NULL)
-- return -ENOMEM;
--
-- snd_soc_set_runtime_hwparams(substream, &jz4740_pcm_hardware);
--
-- runtime->private_data = prtd;
--
-- return 0;
--}
--
--static int jz4740_pcm_close(struct snd_pcm_substream *substream)
--{
-- struct snd_pcm_runtime *runtime = substream->runtime;
-- struct jz4740_runtime_data *prtd = runtime->private_data;
--
-- kfree(prtd);
--
-- return 0;
--}
--
--static int jz4740_pcm_mmap(struct snd_pcm_substream *substream,
-- struct vm_area_struct *vma)
--{
-- return remap_pfn_range(vma, vma->vm_start,
-- substream->dma_buffer.addr >> PAGE_SHIFT,
-- vma->vm_end - vma->vm_start, vma->vm_page_prot);
--}
--
--static struct snd_pcm_ops jz4740_pcm_ops = {
-- .open = jz4740_pcm_open,
-- .close = jz4740_pcm_close,
-- .ioctl = snd_pcm_lib_ioctl,
-- .hw_params = jz4740_pcm_hw_params,
-- .hw_free = jz4740_pcm_hw_free,
-- .prepare = jz4740_pcm_prepare,
-- .trigger = jz4740_pcm_trigger,
-- .pointer = jz4740_pcm_pointer,
-- .mmap = jz4740_pcm_mmap,
--};
--
--static int jz4740_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
--{
-- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-- struct snd_dma_buffer *buf = &substream->dma_buffer;
-- size_t size = jz4740_pcm_hardware.buffer_bytes_max;
--
-- buf->dev.type = SNDRV_DMA_TYPE_DEV;
-- buf->dev.dev = pcm->card->dev;
-- buf->private_data = NULL;
--
-- buf->area = dma_alloc_noncoherent(pcm->card->dev, size,
-- &buf->addr, GFP_KERNEL);
-- if (!buf->area)
-- return -ENOMEM;
--
-- buf->bytes = size;
--
-- return 0;
--}
--
--static void jz4740_pcm_free(struct snd_pcm *pcm)
--{
-- struct snd_pcm_substream *substream;
-- struct snd_dma_buffer *buf;
-- int stream;
--
-- for (stream = 0; stream < SNDRV_PCM_STREAM_LAST; ++stream) {
-- substream = pcm->streams[stream].substream;
-- if (!substream)
-- continue;
--
-- buf = &substream->dma_buffer;
-- if (!buf->area)
-- continue;
--
-- dma_free_noncoherent(pcm->card->dev, buf->bytes, buf->area,
-- buf->addr);
-- buf->area = NULL;
-- }
--}
--
--static u64 jz4740_pcm_dmamask = DMA_BIT_MASK(32);
--
--static int jz4740_pcm_new(struct snd_soc_pcm_runtime *rtd)
--{
-- struct snd_card *card = rtd->card->snd_card;
-- struct snd_pcm *pcm = rtd->pcm;
-- int ret = 0;
--
-- if (!card->dev->dma_mask)
-- card->dev->dma_mask = &jz4740_pcm_dmamask;
--
-- if (!card->dev->coherent_dma_mask)
-- card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
--
-- if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
-- ret = jz4740_pcm_preallocate_dma_buffer(pcm,
-- SNDRV_PCM_STREAM_PLAYBACK);
-- if (ret)
-- goto err;
-- }
--
-- if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
-- ret = jz4740_pcm_preallocate_dma_buffer(pcm,
-- SNDRV_PCM_STREAM_CAPTURE);
-- if (ret)
-- goto err;
-- }
--
--err:
-- return ret;
--}
--
--static struct snd_soc_platform_driver jz4740_soc_platform = {
-- .ops = &jz4740_pcm_ops,
-- .pcm_new = jz4740_pcm_new,
-- .pcm_free = jz4740_pcm_free,
-+static const struct snd_dmaengine_pcm_config jz4740_dmaengine_pcm_config = {
-+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+ .pcm_hardware = &jz4740_pcm_hardware,
-+ .prealloc_buffer_size = 256 * PAGE_SIZE,
- };
-
- static int jz4740_pcm_probe(struct platform_device *pdev)
- {
-- return snd_soc_register_platform(&pdev->dev, &jz4740_soc_platform);
-+ return snd_dmaengine_pcm_register(&pdev->dev,
-+ &jz4740_dmaengine_pcm_config,
-+ SND_DMAENGINE_PCM_FLAG_COMPAT);
- }
-
- static int jz4740_pcm_remove(struct platform_device *pdev)
- {
-- snd_soc_unregister_platform(&pdev->dev);
-+ snd_dmaengine_pcm_unregister(&pdev->dev);
- return 0;
- }
-
---- a/sound/soc/jz4740/jz4740-pcm.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--/*
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#ifndef _JZ4740_PCM_H
--#define _JZ4740_PCM_H
--
--#include <linux/dma-mapping.h>
--#include <asm/mach-jz4740/dma.h>
--
--
--struct jz4740_pcm_config {
-- struct jz4740_dma_config dma_config;
-- phys_addr_t fifo_addr;
--};
--
--#endif
diff --git a/target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
index 5991635..180fa1d 100644
--- a/target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
+++ b/target/linux/xburst/patches-3.18/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
@@ -1,17 +1,17 @@
-From 10fd63ee59dd9de4174f92f2f292b82fe46f1546 Mon Sep 17 00:00:00 2001
+From b0eb5175e0de3e5134a36a7da382d8811562af12 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue, 15 Mar 2011 12:49:15 +0100
-Subject: [PATCH 01/16] ubi: Read only the vid header instead of the whole
- page
+Subject: [PATCH 1/7] ubi: Read only the vid header instead of the whole page
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/mtd/ubi/io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
+diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
+index d361349..596b568 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
-@@ -1019,7 +1019,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic
+@@ -1009,7 +1009,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
p = (char *)vid_hdr - ubi->vid_hdr_shift;
read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
@@ -20,3 +20,6 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
return read_err;
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
index 57f53b7..bba9f0b 100644
--- a/target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
+++ b/target/linux/xburst/patches-3.18/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
@@ -1,18 +1,18 @@
-From f2b7099d3986e59aab5792cecc052e440caf2cdd Mon Sep 17 00:00:00 2001
+From 98d33db1c87e2447b9b203399d2f995e05ecdb52 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sat, 26 Feb 2011 15:30:07 +0100
-Subject: [PATCH 02/16] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
+Subject: [PATCH 2/7] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
Avoid sending unnecessary READ commands to the chip.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/mtd/nand/nand_base.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 5b5c627..4c8d646 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
-@@ -1278,9 +1278,16 @@ static int nand_read_page_hwecc_oob_firs
+@@ -1360,9 +1360,16 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
unsigned int max_bitflips = 0;
/* Read the OOB area first */
@@ -32,10 +32,10 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
for (i = 0; i < chip->ecc.total; i++)
ecc_code[i] = chip->oob_poi[eccpos[i]];
-@@ -1455,7 +1462,9 @@ static int nand_do_read_ops(struct mtd_i
- if (realpage != chip->pagebuf || oob) {
- bufpoi = aligned ? buf : chip->buffers->databuf;
+@@ -1575,7 +1582,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ __func__, buf);
+ read_retry:
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ if (chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) {
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
@@ -43,3 +43,6 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
/*
* Now read the page into the buffer. Absent an error,
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
index ba40603..f3f6ca9 100644
--- a/target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
+++ b/target/linux/xburst/patches-3.18/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
@@ -1,27 +1,18 @@
-From 90e325c5e16db262818bca442b00f5ac10b9c852 Mon Sep 17 00:00:00 2001
+From 6031a240816d1c9a10f596d0648e586f6b878809 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue, 15 Mar 2011 12:33:41 +0100
-Subject: [PATCH 03/16] NAND: Add support for subpage reads for
+Subject: [PATCH 3/7] NAND: Add support for subpage reads for
NAND_ECC_HW_OOB_FIRST
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
- drivers/mtd/nand/nand_base.c | 80 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/mtd/nand.h | 2 +-
- 2 files changed, 78 insertions(+), 4 deletions(-)
+ drivers/mtd/nand/nand_base.c | 77 +++++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 76 insertions(+), 1 deletion(-)
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 4c8d646..9809059 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
-@@ -1118,7 +1118,7 @@ static int nand_read_page_swecc(struct m
- * @bufpoi: buffer to store read data
- */
- static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
-- uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
-+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
- {
- int start_step, end_step, num_steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
-@@ -1311,6 +1311,75 @@ static int nand_read_page_hwecc_oob_firs
+@@ -1393,6 +1393,75 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
}
/**
@@ -97,38 +88,22 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
* nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
-@@ -1477,7 +1546,7 @@ static int nand_do_read_ops(struct mtd_i
- else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
- !oob)
- ret = chip->ecc.read_subpage(mtd, chip,
-- col, bytes, bufpoi);
-+ col, bytes, bufpoi, page);
- else
- ret = chip->ecc.read_page(mtd, chip, bufpoi,
- oob_required, page);
-@@ -3488,8 +3557,13 @@ int nand_scan_tail(struct mtd_info *mtd)
- "hardware ECC not possible\n");
+@@ -3950,8 +4019,14 @@ int nand_scan_tail(struct mtd_info *mtd)
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
-- if (!chip->ecc.read_page)
-+ if (!chip->ecc.read_page) {
- chip->ecc.read_page = nand_read_page_hwecc_oob_first;
-+ if (!chip->ecc.read_subpage) {
-+ chip->ecc.read_subpage = nand_read_subpage_hwecc_oob_first;
+- if (!ecc->read_page)
++
++ if (!ecc->read_page) {
+ ecc->read_page = nand_read_page_hwecc_oob_first;
++ if (!ecc->read_subpage) {
++ ecc->read_subpage = nand_read_subpage_hwecc_oob_first;
+ chip->options |= NAND_SUBPAGE_READ;
+ }
+ }
case NAND_ECC_HW:
/* Use standard hwecc read page function? */
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -349,7 +349,7 @@ struct nand_ecc_ctrl {
- int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page);
- int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-- uint32_t offs, uint32_t len, uint8_t *buf);
-+ uint32_t offs, uint32_t len, uint8_t *buf, int page);
- int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, uint32_t data_len,
- const uint8_t *data_buf, int oob_required);
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch b/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
index 7a7ce73..3de6ee0 100644
--- a/target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
+++ b/target/linux/xburst/patches-3.18/004-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
@@ -1,20 +1,20 @@
-From 46c628ae74578382ec324405dd4caafdbf3838bd Mon Sep 17 00:00:00 2001
+From 1a1095927d224403af8ad57c354cc64521bf3081 Mon Sep 17 00:00:00 2001
From: Paul Cercueil <paul@crapouillou.net>
Date: Sat, 16 Jun 2012 19:36:31 +0200
-Subject: [PATCH 06/16] ASoC: JZ4740: delay activation of the DAC to work
- around a sound bug.
+Subject: [PATCH 4/7] ASoC: JZ4740: delay activation of the DAC to work around
+ a sound bug.
A proper fix of that bug would require a big rewrite of the driver,
which (I hope) will be done eventually.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/jz4740.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
+diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c
+index df7c01c..6939444 100644
--- a/sound/soc/codecs/jz4740.c
+++ b/sound/soc/codecs/jz4740.c
-@@ -249,12 +249,15 @@ static int jz4740_codec_set_bias_level(s
+@@ -249,12 +249,15 @@ static int jz4740_codec_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
@@ -33,3 +33,6 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
break;
case SND_SOC_BIAS_STANDBY:
/* The only way to clear the suspend flag is to reset the codec */
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch b/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
index dc66b00..2dd8858 100644
--- a/target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
+++ b/target/linux/xburst/patches-3.18/005-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
@@ -1,7 +1,7 @@
-From aff616f4a33bd3a9ab1506fdbe97fcfe285cb7b0 Mon Sep 17 00:00:00 2001
+From f05b1ecd7e4fde7e69320a4b7be461636e982991 Mon Sep 17 00:00:00 2001
From: Paul Cercueil <paul@crapouillou.net>
Date: Thu, 13 Sep 2012 00:09:20 +0200
-Subject: [PATCH 07/16] RTC: JZ4740: Init the "regulator" register on startup.
+Subject: [PATCH 5/7] RTC: JZ4740: Init the "regulator" register on startup.
This register controls the accuracy of the RTC. uC/OS-II use
the RTC as a 100Hz clock, and writes a completely wrong value
@@ -9,37 +9,38 @@ on that register, that we have to overwrite if we want a working
real-time clock.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/rtc/rtc-jz4740.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
+diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
+index 08f5160..5f027dc 100644
--- a/drivers/rtc/rtc-jz4740.c
+++ b/drivers/rtc/rtc-jz4740.c
-@@ -14,6 +14,7 @@
- *
+@@ -15,6 +15,7 @@
*/
+ #include <linux/io.h>
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-@@ -215,6 +216,7 @@ static int jz4740_rtc_probe(struct platf
- int ret;
+@@ -216,6 +217,7 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
struct jz4740_rtc *rtc;
uint32_t scratchpad;
+ struct resource *mem;
+ struct clk *rtc_clk;
- rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
-@@ -280,6 +282,21 @@ static int jz4740_rtc_probe(struct platf
+@@ -263,6 +265,21 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
}
}
+ rtc_clk = clk_get(&pdev->dev, "rtc");
+ if (IS_ERR(rtc_clk)) {
+ dev_err(&pdev->dev, "Failed to get RTC clock\n");
-+ goto err_free_irq;
++ return PTR_ERR(rtc_clk);
+ }
+
+ /* TODO: initialize the ADJC bits (25:16) to fine-tune
@@ -52,5 +53,8 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+ dev_warn(&pdev->dev, "Could not update RTC regulator register\n");
+
return 0;
+ }
- err_free_irq:
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch
index 95545ed..906b996 100644
--- a/target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch
+++ b/target/linux/xburst/patches-3.18/006-Add-ili8960-lcd-driver.patch
@@ -1,7 +1,12 @@
-From ee3a5c779be4d1d270388203cd1c6a734a0bf4ed Mon Sep 17 00:00:00 2001
+From 8741ead92bc93e66740237e51b88b8690ebcbba3 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sun, 1 Aug 2010 21:19:40 +0200
-Subject: [PATCH 09/16] Add ili8960 lcd driver
+Subject: [PATCH 6/7] Add ili8960 lcd driver
+
+Includes the following changes from the jz-3.5 branch:
+- Use module_spi_driver
+- Use devm_kzalloc
+- Use kstrtoul
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
@@ -11,6 +16,8 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
3 files changed, 270 insertions(+)
create mode 100644 drivers/video/backlight/ili8960.c
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index 8d03924..14adcc6 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -59,6 +59,13 @@ config LCD_LTV350QV
@@ -27,6 +34,8 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
config LCD_ILI922X
tristate "ILI Technology ILI9221/ILI9222 support"
depends on SPI
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index fcd50b73..1f89974 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
@@ -37,6 +46,9 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
obj-$(CONFIG_LCD_ILI922X) += ili922x.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o
+diff --git a/drivers/video/backlight/ili8960.c b/drivers/video/backlight/ili8960.c
+new file mode 100644
+index 0000000..61eb815
--- /dev/null
+++ b/drivers/video/backlight/ili8960.c
@@ -0,0 +1,262 @@
@@ -302,3 +314,6 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LCD driver for Ilitek ili8960");
+MODULE_ALIAS("spi:ili8960");
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
index c45964f..aa8a476 100644
--- a/target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
+++ b/target/linux/xburst/patches-3.18/007-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
@@ -1,19 +1,19 @@
-From 590ceec7028084ebd9d643b4929ceae9fd806fbe Mon Sep 17 00:00:00 2001
+From 4371d60ae342c76708c4317e06fb7dcf0159c2f1 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Wed, 13 Oct 2010 01:17:24 +0200
-Subject: [PATCH 10/16] qi_lb60: Don't use 3-wire spi mode for the display for
+Subject: [PATCH 7/7] qi_lb60: Don't use 3-wire spi mode for the display for
now
The spi_gpio driver does not support 3-wire mode.
-
-Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
arch/mips/jz4740/board-qi_lb60.c | 1 -
1 file changed, 1 deletion(-)
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index c454525..04cf890 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -311,7 +311,6 @@ static struct spi_board_info qi_lb60_spi
+@@ -312,7 +312,6 @@ static struct spi_board_info qi_lb60_spi_board_info[] = {
.chip_select = 0,
.bus_num = 1,
.max_speed_hz = 30 * 1000,
@@ -21,3 +21,6 @@ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
},
};
+--
+1.7.10.4
+