summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c158
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk9
10 files changed, 192 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0922550..667d228 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -411,6 +411,12 @@ gl-ar300)
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
+jwap230)
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "5:wan" "6@eth1"
+ ;;
+
wpj342)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:wan"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 08e5fd0..f517f9ba 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -158,6 +158,9 @@ get_status_led() {
ja76pf2)
status_led="jjplus:green:led1"
;;
+ jwap230)
+ status_led="jwap230:green:led1"
+ ;;
ls-sr71)
status_led="ubnt:green:d22"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 936725f..4eed64b 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -566,6 +566,9 @@ ar71xx_board_detect() {
*JWAP003)
name="jwap003"
;;
+ *JWAP230)
+ name="jwap230"
+ ;;
*"Hornet-UB")
local size
size=$(awk '/firmware/ { print $2 }' /proc/mtd)
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index f5a8d0d..119537e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -236,6 +236,7 @@ platform_check_image() {
gl-domino | \
hiwifi-hc6361 | \
hornet-ub-x2 | \
+ jwap230 | \
mzk-w04nu | \
mzk-w300nh | \
tew-632brp | \
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 4ecd099..6605558 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -97,6 +97,7 @@ CONFIG_ATH79_MACH_HIWIFI_HC6361=y
CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_JWAP230=y
CONFIG_ATH79_MACH_MC_MAC1200R=y
CONFIG_ATH79_MACH_MR12=y
CONFIG_ATH79_MACH_MR16=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 9ab6fed..b0eada1 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -680,6 +680,15 @@ config ATH79_MACH_JWAP003
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_JWAP230
+ bool "jjPlus JWAP230 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 33c274f..390b17d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
new file mode 100644
index 0000000..f94e5b4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
@@ -0,0 +1,158 @@
+/*
+ * jjPlus JWAP230 board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JWAP230_GPIO_LED_LED1 23
+#define JWAP230_GPIO_LED_LED2 22
+#define JWAP230_GPIO_LED_LED3 21
+
+#define JWAP230_MAC0_OFFSET 0x0
+#define JWAP230_MAC1_OFFSET 0x6
+#define JWAP230_WMAC_CALDATA_OFFSET 0x1000
+
+static struct gpio_led jwap230_leds_gpio[] __initdata = {
+ {
+ .name = "jwap230:green:led1",
+ .gpio = JWAP230_GPIO_LED_LED1,
+ .active_low = 1,
+ },
+ {
+ .name = "jwap230:green:led2",
+ .gpio = JWAP230_GPIO_LED_LED2,
+ .active_low = 1,
+ },
+ {
+ .name = "jwap230:green:led3",
+ .gpio = JWAP230_GPIO_LED_LED3,
+ .active_low = 1,
+ }
+};
+
+static const struct ar8327_led_info jwap230_leds_qca8337[] = {
+ AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
+ AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
+};
+
+/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
+static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
+ .led_ctrl0 = 0xcf37cf37,
+ .led_ctrl1 = 0xcf37cf37,
+ .led_ctrl2 = 0xcf37cf37,
+ .led_ctrl3 = 0x0,
+ .open_drain = true,
+};
+
+/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
+static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ .mac06_exchange_dis = true,
+};
+
+/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
+static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_platform_data jwap230_qca8337_data = {
+ .pad0_cfg = &jwap230_qca8337_pad0_cfg,
+ .pad6_cfg = &jwap230_qca8337_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &jwap230_qca8337_led_cfg,
+ .num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
+ .leds = jwap230_leds_qca8337,
+};
+
+static struct mdio_board_info jwap230_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &jwap230_qca8337_data,
+ },
+};
+
+static void __init jwap230_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
+ jwap230_leds_gpio);
+
+ mdiobus_register_board_info(jwap230_mdio0_info,
+ ARRAY_SIZE(jwap230_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* QCA9558 GMAC0 is connected to RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* QCA9558 GMAC1 is connected to SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 3425ce9..7dd60ac 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -94,6 +94,7 @@ enum ath79_mach_type {
ATH79_MACH_JA76PF, /* jjPlus JA76PF */
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
ATH79_MACH_MR16, /* Cisco Meraki MR16 */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index bff3d26..cbb47f5 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -268,6 +268,15 @@ define Device/gl-inet-6416A-v1
endef
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
+define Device/jwap230
+ DEVICE_TITLE := jjPlus JWAP230
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = JWAP230
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += jwap230
+
define Device/rnx-n360rt
$(Device/tplink-4m)
DEVICE_TITLE := Rosewill RNX-N360RT