summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--target/linux/etrax-2.6/patches/cris/019-vhdl.patch4836
1 files changed, 0 insertions, 4836 deletions
diff --git a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch b/target/linux/etrax-2.6/patches/cris/019-vhdl.patch
deleted file mode 100644
index 95478f8..0000000
--- a/target/linux/etrax-2.6/patches/cris/019-vhdl.patch
+++ /dev/null
@@ -1,4836 +0,0 @@
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,533 @@
-+/*
-+ foxbone.c
-+ Linux Kernel Driver for FoxBone on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+#include <linux/spinlock.h>
-+#include <linux/autoconf.h>
-+#include <linux/interrupt.h>
-+#include <asm/etraxgpio.h>
-+#include <asm/arch/svinto.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+#include <asm/irq.h>
-+#include <asm/arch/io_interface_mux.h>
-+
-+
-+#include "foxbone.h"
-+#include "foxbone_userspace.h"
-+
-+
-+#define Fox_line_Read (1<<1)
-+#define Fox_line_WriteData (1<<2)
-+#define Fox_line_Reset (1<<3)
-+#define Fox_line_WriteAddress (1<<4)
-+
-+#define FOX_CLEAR_LINES (~(0x00FFFF00 | Fox_line_Read | Fox_line_WriteAddress | Fox_line_WriteData))
-+
-+#define DEV_NAME "foxbone"
-+#define DEV_MAJOR 14
-+
-+spinlock_t foxbone_lock_var = SPIN_LOCK_UNLOCKED;
-+unsigned long foxbone_irq_flags;
-+// is the userspce device enables ?
-+unsigned char foxbone_userspace_is_open = 0;
-+
-+// are we processing interrupts ? (during fpga_flash the ints are not allowed to be handles
-+unsigned char foxbone_allow_int;
-+
-+// the shadow of which ints are enabled
-+unsigned int foxbone_shadow_int_high = 0;
-+unsigned int foxbone_shadow_int_low = 0;
-+
-+// the following four variables get filled when the foxbone driver is started
-+// they hold the release and the the application words
-+unsigned int FOXBONE_release = 0;
-+unsigned int FOXBONE_application1 = 0;
-+unsigned int FOXBONE_application2 = 0;
-+unsigned int FOXBONE_application3 = 0;
-+
-+
-+
-+FOXINT_CALLBACK foxint_callbacks[32];
-+
-+unsigned int foxbone_read(unsigned int add);
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+static irqreturn_t foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-+
-+unsigned int foxbone_interrupt_enabled = 0;
-+
-+
-+
-+void FOX_delay(unsigned int d){
-+ while(d--){
-+ unsigned int i = 0;
-+ for(i = 0; i < 32000; i++){
-+ i*=2;
-+ i/=2;
-+ };
-+ };
-+};
-+
-+
-+void foxbone_lock(void){
-+ spin_lock_irqsave(&foxbone_lock_var, foxbone_irq_flags);
-+
-+};
-+
-+void foxbone_unlock(void){
-+ spin_unlock_irqrestore(&foxbone_lock_var, foxbone_irq_flags);
-+
-+};
-+
-+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback){
-+ if(irq > 31){
-+ printk("foxbone: trying to register invalid interrupt\n");
-+ return 0;
-+ };
-+ if(!foxbone_interrupt_enabled){
-+ foxbone_interrupt_enabled = 1;
-+ printk("foxbone: starting interrupt system\n");
-+ int err;
-+ if ((err = request_irq(PA_IRQ_NBR, foxbone_pa_interrupt, SA_INTERRUPT | SA_SHIRQ, "foxbone", 123))){
-+ printk("foxbone: request_irq failed: Error %d\n",err);
-+ return ;
-+ }
-+ printk("foxbone: request_irq success -> irq: %ld\n",PA_IRQ_NBR);
-+ *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);
-+ };
-+
-+ printk("foxbone: new int %d registered\n", irq);
-+ foxint_callbacks[irq] = callback;
-+ if(irq < 15){
-+ foxbone_shadow_int_high |= (1<<irq);
-+ foxbone_write(0x08, foxbone_shadow_int_high);
-+ } else {
-+ foxbone_shadow_int_high |= (1<<15);
-+ foxbone_write(0x08, foxbone_shadow_int_high);
-+ foxbone_shadow_int_low |= (1<<(irq-16));
-+ foxbone_write(0x09, foxbone_shadow_int_low);
-+ };
-+ return 1;
-+};
-+
-+
-+void foxbone_unregister_interrupt(unsigned char irq){
-+ if(irq > 31){
-+ printk("foxbone: trying to unregister invalid interrupt\n");
-+ return ;
-+ };
-+ printk("foxbone: interrupt %d unregistered\n", irq);
-+ if(irq < 15){
-+ foxbone_shadow_int_high &= ~(1<<irq);
-+ foxbone_write(0x08, foxbone_shadow_int_high);
-+ } else {
-+ foxbone_shadow_int_low &= ~(1<<(irq-16));
-+ foxbone_write(0x09, foxbone_shadow_int_low);
-+
-+ if(!foxbone_shadow_int_low){
-+ foxbone_shadow_int_high &= ~(1<<15);
-+ foxbone_write(0x08, foxbone_shadow_int_high);
-+ };
-+ };
-+};
-+
-+#if 0
-+#define DBG_INT(x) x
-+#else
-+#define DBG_INT(x)
-+#endif
-+
-+// this is the bottom half of our interrupt handler
-+static void foxbone_handle_interrupt(void){
-+ if(foxbone_allow_int){
-+ foxbone_lock();
-+ unsigned int irq_high, irq_low, i;
-+ DBG_INT(printk("Int handler");)
-+ if(*R_PORT_PA_DATA & (1)){
-+ irq_high = foxbone_read(0x08);
-+ DBG_INT(printk("Got high_int %d\n", irq_high);)
-+ for(i = 0; i < 15; i++){
-+ if(irq_high & (1<<i)){
-+ DBG_INT(printk("Go high_int %d\n",i);)
-+ if(foxint_callbacks[i]){
-+ foxint_callbacks[i](i);
-+ };
-+ };
-+ };
-+ if(irq_high & (0x8000)){
-+ irq_low = foxbone_read(0x09);
-+ DBG_INT(printk("Got low_int %d\n", irq_low);)
-+ for(i = 0; i < 16; i++){
-+ if(irq_low & (1<<i)){
-+ DBG_INT(printk("Go low_int %d\n", i);)
-+ if(foxint_callbacks[i+16]){
-+ foxint_callbacks[i+16](i+16);
-+ };
-+ };
-+ };
-+
-+ };
-+ };
-+ foxbone_unlock();
-+ };
-+};
-+
-+// this is the top half of our interrupt handler
-+static void tasklet_foxbone_int(unsigned long data);
-+DECLARE_TASKLET(tl_foxint_descr, tasklet_foxbone_int, 0L);
-+static void tasklet_foxbone_int(unsigned long data){
-+
-+ DBG_INT(printk("got an int\n");)
-+ foxbone_handle_interrupt();
-+
-+};
-+
-+
-+static irqreturn_t
-+foxbone_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ unsigned long tmp;
-+
-+ /* Find what PA interrupts are active */
-+ tmp = (*R_IRQ_READ1);
-+// printk("_____%ud",*R_IRQ_READ1);
-+ /* Find those that we have enabled */
-+// tmp &= (1 << R_IRQ_MASK1_SET__pa0__BITNR);
-+
-+ /* Clear them.. */
-+ // *R_IRQ_MASK1_CLR = tmp;
-+ //(1 << R_IRQ_MASK1_SET__pa0__BITNR);
-+
-+ tasklet_schedule(&tl_foxint_descr);
-+ // *R_IRQ_MASK1_SET = IO_STATE(R_IRQ_MASK1_SET, pa0, set);
-+
-+ return IRQ_RETVAL(1);
-+}
-+
-+
-+static void foxbone_bus_in(void){
-+ // turn all the iog8-15 pins into outputs
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+
-+ // turn all the iog16-23 pins into outputs
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+};
-+
-+static void foxbone_bus_out(void){
-+ // turn all the iog8-15 pins into outputs
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+
-+ // turn all the iog16-23 pins into outputs
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+};
-+
-+void foxbone_reset(unsigned char reset){
-+ if(reset){
-+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Reset;
-+ } else {
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Reset;
-+ };
-+};
-+
-+static void foxbone_setadd(unsigned long address){
-+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+
-+ *R_PORT_G_DATA = port_g_data_shadow |= (address << 8)| Fox_line_WriteAddress;
-+
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteAddress;
-+};
-+
-+
-+static unsigned int foxbone_read_data(unsigned char next){
-+ unsigned int data;
-+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+
-+ foxbone_bus_in();
-+
-+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_Read;
-+
-+ // do the reading now
-+ data = *R_PORT_G_DATA;
-+ data = *R_PORT_G_DATA;
-+
-+ // now return the Fox_line_ReadData to low state to idle the bus from the FPGA side
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_Read;
-+ foxbone_bus_out();
-+ return ((unsigned int)((data&0x00FFFF00)>>8));
-+}
-+
-+
-+static unsigned int foxbone_write_data(unsigned int data, unsigned char next) {
-+ // clear all address/data/control bits
-+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+
-+ *R_PORT_G_DATA = port_g_data_shadow |= (data << 8)| Fox_line_WriteData;
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+
-+ return 0;
-+}
-+
-+void foxbone_write(unsigned int add, unsigned int data){
-+ foxbone_setadd(add);
-+ foxbone_write_data(data, 0);
-+};
-+
-+unsigned int foxbone_read(unsigned int add){
-+ foxbone_setadd(add);
-+ return foxbone_read_data(0);
-+};
-+
-+void foxbone_write_next(unsigned data){
-+ foxbone_write_data(data, 1);
-+};
-+
-+unsigned int foxbone_read_next(void){
-+ return foxbone_read_data(1);
-+};
-+
-+void foxbone_bulk_write(unsigned int *data, unsigned int length, unsigned int add){
-+ unsigned int i;
-+ foxbone_write(add, *data);
-+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
-+ for(i = 1; i < length; i++){
-+ *R_PORT_G_DATA = port_g_data_shadow = def_val | data[i]<<8;
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+ };
-+};
-+
-+void foxbone_bulk_read(unsigned int *data, unsigned int length, unsigned int add){
-+ //printk("Get data from %d %d\n", add, length);
-+ unsigned int i;
-+ for(i = 0; i < length; i++){
-+ if(i == 0){
-+ data[i] = foxbone_read(add);
-+ } else {
-+ data[i] = foxbone_read_next();
-+ };
-+ };
-+
-+};
-+
-+void foxbone_initialise_bus(void){
-+ memset(foxint_callbacks, 0, sizeof(FOXINT_CALLBACK)*32);
-+
-+ // clear all address/data/control bits
-+ *R_PORT_G_DATA = port_g_data_shadow &= FOX_CLEAR_LINES;
-+ foxbone_reset(0);
-+ int i;
-+ for(i = 0; i < 32000; i++){
-+ i++;
-+ i--;
-+ };
-+ foxbone_reset(1);
-+
-+ foxbone_bus_out();
-+
-+ FOXBONE_release = foxbone_read(0x04);
-+ FOXBONE_application1 = foxbone_read(0x05);
-+ FOXBONE_application2 = foxbone_read(0x06);
-+ FOXBONE_application3 = foxbone_read(0x07);
-+ printk("foxbone : release = 0x%04x\n", FOXBONE_release);
-+ printk("foxbone : application word 1 = 0x%04x\n", FOXBONE_application1);
-+ printk("foxbone : application word 2 = 0x%04x\n", FOXBONE_application2);
-+ printk("foxbone : application word 3 = 0x%04x\n", FOXBONE_application3);
-+
-+
-+};
-+
-+
-+static ssize_t foxbone_userspace_write(struct file * file, const char * buffer, size_t count, loff_t *offset){
-+ if(count > (64 * 1024)){
-+ printk("foxbone: trying to bulk write too much data\n");
-+ return 1;
-+ };
-+ unsigned int *bulk_data = (unsigned int) kmalloc(count, GFP_KERNEL);
-+
-+ copy_from_user((char*) bulk_data, buffer, count);
-+
-+ foxbone_bulk_write(&bulk_data[2], bulk_data[1], bulk_data[0]);
-+
-+ kfree(bulk_data);
-+ return 0;
-+};
-+
-+
-+static ssize_t foxbone_userspace_read(struct file *file, char *buffer, size_t count, loff_t *offset){
-+ if(count > (64 * 1024)){
-+ printk("foxbone: trying to bulk read too much data\n");
-+ return 0;
-+ };
-+
-+ // find out which register we want to read
-+ unsigned int bulk_data_info[2];
-+ copy_from_user((char*) bulk_data_info, buffer, 8);
-+
-+ // read the data
-+ unsigned int *bulk_data = (unsigned int)kmalloc(count, GFP_KERNEL);
-+
-+ foxbone_bulk_read(&bulk_data[0], bulk_data_info[1], bulk_data_info[0]);
-+
-+ copy_to_user((char*)buffer, (char*)bulk_data, count);
-+
-+ kfree(bulk_data);
-+
-+ return count / 4;
-+};
-+
-+// the app has send us some control data
-+static int foxbone_userspace_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ int retval = 0;
-+ FOXBONE_WRITE fb_write;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_INIT_BUS:
-+ foxbone_initialise_bus();
-+ break;
-+
-+ case IOCTL_FOXBONE_WRITE_REG:
-+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
-+ foxbone_write(fb_write.reg, fb_write.data);
-+ break;
-+
-+ case IOCTL_FOXBONE_READ_REG:
-+ retval = foxbone_read(arg);
-+ break;
-+
-+ case IOCTL_FOXBONE_WRITE_NEXT:
-+ copy_from_user((FOXBONE_WRITE*)&fb_write, (FOXBONE_WRITE*)arg, sizeof(fb_write));
-+ foxbone_write_next(fb_write.data);
-+ break;
-+
-+ case IOCTL_FOXBONE_READ_NEXT:
-+ retval = foxbone_read_next();
-+ break;
-+
-+ case IOCTL_FOXBONE_INTERRUPTS:
-+ foxbone_allow_int = arg;
-+ break;
-+
-+ default:
-+ printk("foxbone_userspace : unknown ioctl\n");
-+ break;
-+ }
-+ return retval;
-+};
-+
-+
-+
-+static int foxbone_userspace_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("foxbone_userspace : trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxbone_userspace_is_open) {
-+ printk("foxbone_userspace : Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int foxbone_userspace_close(struct inode * inode, struct file * file){
-+
-+ foxbone_userspace_is_open = 0;
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxbone_userspace_fops = {
-+ ioctl: foxbone_userspace_ioctl,
-+ write: foxbone_userspace_write,
-+ read: foxbone_userspace_read,
-+ open: foxbone_userspace_open,
-+ release: foxbone_userspace_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int foxbone_userspace_init(void){
-+ // flame the kprintk
-+ printk("foxbone_userspace : FOX-VHDL userspace access module\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxbone_userspace_fops)) {
-+ printk( "fpga_mod.ko : Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+ foxbone_userspace_is_open = 0;
-+ printk("foxbone_userspace : Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void foxbone_userspace_exit(void){
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+
-+static int __init foxbone_init(void){
-+ printk("foxbone : FOX-VHDL FOXBONE access module started\n");
-+ foxbone_initialise_bus();
-+ foxbone_allow_int = 1;
-+ foxbone_userspace_init();
-+ return 0;
-+}
-+
-+
-+static void __exit foxbone_exit(void){
-+ printk( "foxbone : Cleanup\n" );
-+ foxbone_userspace_exit();
-+}
-+
-+module_init (foxbone_init);
-+module_exit (foxbone_exit);
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,21 @@
-+// prototypes for foxbone compliant modules
-+
-+typedef void (*FOXINT_CALLBACK) (unsigned int);
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-+void foxbone_unregister_interrupt(unsigned char irq);
-+int foxbone_register_interrupt(unsigned char irq, FOXINT_CALLBACK callback);
-+void foxbone_reset(unsigned char reset);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_syscalls.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,155 @@
-+/*
-+ foxbone_syscalls.c
-+ Linux Kernel syscalls for FoxBone on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/kernel.h>
-+#include <asm/uaccess.h>
-+#include <linux/foxbone_syscalls.h>
-+#include "foxbone.h"
-+
-+asmlinkage unsigned short int sys_foxboneread(unsigned short int reg){
-+ return foxbone_read(reg);
-+};
-+
-+asmlinkage void sys_foxbonewrite(unsigned short int reg, unsigned short int value){
-+ foxbone_write(reg, value);
-+};
-+
-+asmlinkage void sys_foxbonebulkread(unsigned short int reg, unsigned short int *value, unsigned int length){
-+ unsigned int i;
-+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
-+ *buffer = foxbone_read(reg);
-+ for(i = 1; i < length; i++){
-+ buffer[i] = foxbone_read_next();
-+ };
-+ copy_to_user(value, buffer, length * 2);
-+ kfree(buffer);
-+
-+};
-+
-+asmlinkage void sys_foxbonebulkwrite(unsigned short int reg, unsigned short int *value, unsigned int length){
-+ unsigned int i;
-+ unsigned int *buffer = kmalloc(length * 2, GFP_KERNEL);
-+ copy_from_user(buffer, value, length * 2);
-+ foxbone_write(reg, *buffer);
-+ for(i = 1; i < length; i++){
-+ foxbone_write_next(buffer[i]);
-+ };
-+ kfree(buffer);
-+};
-+
-+
-+/*
-+ interrupt handling from userspace
-+*/
-+
-+typedef struct _FOX_INT {
-+ unsigned char enabled;
-+ unsigned char count;
-+ unsigned char wakeup;
-+ wait_queue_head_t wait_queue;
-+} FOX_INT;
-+
-+
-+FOX_INT syscall_interrupts[32];
-+
-+
-+void foxbone_interrupt_callback(unsigned int interrupt){
-+ //printk("GOT INT %d\n", irq_no);
-+ if(syscall_interrupts[interrupt].enabled){
-+ syscall_interrupts[interrupt].count ++;
-+ if(syscall_interrupts[interrupt].wakeup){
-+ wake_up_interruptible(&syscall_interrupts[interrupt].wait_queue);
-+ };
-+ };
-+};
-+
-+
-+asmlinkage void sys_foxboneintreg(unsigned long int interrupt, unsigned char state){
-+ if(interrupt > 31){
-+ interrupt = 31;
-+ };
-+ if(state){
-+ foxbone_register_interrupt(interrupt, foxbone_interrupt_callback);
-+ syscall_interrupts[interrupt].enabled = 1;
-+ syscall_interrupts[interrupt].count = 0;
-+ init_waitqueue_head(&syscall_interrupts[interrupt].wait_queue);
-+ } else {
-+ foxbone_unregister_interrupt(interrupt);
-+ syscall_interrupts[interrupt].enabled = 0;
-+ };
-+};
-+
-+
-+asmlinkage unsigned int sys_foxboneintcheck( unsigned long int interrupt){
-+ unsigned int retval = 0xffff;
-+ if(interrupt > 31){
-+ interrupt = 31;
-+ };
-+ if(syscall_interrupts[interrupt].enabled){
-+ retval = syscall_interrupts[interrupt].count;
-+ syscall_interrupts[interrupt].count = 0;
-+ };
-+ return retval;
-+};
-+
-+
-+asmlinkage unsigned int sys_foxboneintwait(unsigned long int interrupt, unsigned char timeout){
-+ unsigned int retval = 0xffff;
-+ if(interrupt > 31){
-+ interrupt = 31;
-+ };
-+ if(syscall_interrupts[interrupt].enabled){
-+ syscall_interrupts[interrupt].wakeup = 1;
-+ syscall_interrupts[interrupt].count = 0;
-+ interruptible_sleep_on_timeout(&syscall_interrupts[interrupt].wait_queue, timeout*HZ);
-+ if(syscall_interrupts[interrupt].count != 0){
-+ retval = syscall_interrupts[interrupt].count;
-+ };
-+ syscall_interrupts[interrupt].count = 0;
-+ syscall_interrupts[interrupt].wakeup = 0;
-+ };
-+ return retval;
-+};
-+
-+
-+asmlinkage void sys_foxbonereset(unsigned short int reg){
-+ foxbone_reset(0);
-+ int i;
-+ for(i = 0; i < 32000; i++){
-+ i++;
-+ i--;
-+ };
-+ foxbone_reset(1);
-+};
-+
-+static int __init foxbone_syscall_init(void){
-+ memset(syscall_interrupts, 0, sizeof(FOX_INT) * 32);
-+ return 0;
-+}
-+
-+
-+static void __exit foxbone_syscall_exit(void){
-+}
-+
-+module_init (foxbone_syscall_init);
-+module_exit (foxbone_syscall_exit);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/foxbone_userspace.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/foxbone_userspace.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,17 @@
-+// These are the ioctls for accessing /dev/foxbone
-+
-+#define IOCTL_FOXBONE_INIT_BUS 0x3341
-+#define IOCTL_FOXBONE_WRITE_REG 0x3342
-+#define IOCTL_FOXBONE_READ_REG 0x3343
-+#define IOCTL_FOXBONE_WRITE_NEXT 0x3344
-+#define IOCTL_FOXBONE_READ_NEXT 0x3345
-+#define IOCTL_FOXBONE_INTERRUPTS 0x3346
-+
-+// the data structure used to write a register
-+typedef struct _FOXBONE_WRITE {
-+ unsigned int reg;
-+ unsigned int data;
-+} FOXBONE_WRITE;
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/foxbone/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/foxbone/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_FOXBONE) += foxbone.o
-+obj-$(CONFIG_FOXBONE) += foxbone_syscalls.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/fox_event.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/fox_event.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,170 @@
-+/*
-+ fox_event.c
-+ Linux Kernel Driver for FoxBone EventCounter on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "event"
-+#define DEV_MAJOR 193
-+
-+#include "foxbone.h"
-+
-+unsigned char foxevent_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_EVENT_SET_ALARM 0x4745
-+#define IOCTL_FOXBONE_EVENT_GET_COUNT 0x4746
-+#define IOCTL_FOXBONE_EVENT_GET_ALARM 0x4747
-+#define IOCTL_FOXBONE_EVENT_RESET_ALARM 0x4748
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ unsigned int current_io = 0;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_EVENT_SET_ALARM:
-+ foxbone_write(0x0040, 0);
-+ foxbone_write(0x0041, arg);
-+ foxbone_write(0x0040, 3);
-+ break;
-+
-+ case IOCTL_FOXBONE_EVENT_GET_COUNT:
-+ retval = foxbone_read(0x0042);
-+ break;
-+
-+ case IOCTL_FOXBONE_EVENT_GET_ALARM:
-+ retval = foxbone_read(0x0043);
-+ break;
-+
-+ case IOCTL_FOXBONE_EVENT_RESET_ALARM:
-+ current_io = foxbone_read(0x0040);
-+ current_io &= ~(1<<1);
-+ foxbone_write(0x0040, 0);
-+ current_io |= (1<<1);
-+ foxbone_write(0x0040, 0);
-+ break;
-+
-+ default:
-+ printk("fox_event: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_event: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxevent_is_open) {
-+ printk("fox_event: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ printk("fox_event: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxevent_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("fox_event: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxevent_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_event: FOX-VHDL FPGA io module\n");
-+ //printk("fox_event: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_event: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxevent_module_fops)) {
-+ printk( "fox_event: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxevent_is_open = 0;
-+ printk("fox_event: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_event: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_event/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_event/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_EVENT) += fox_event.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_FOX_FPGA) += dpa3palg.oo dpalg.oo dpjtag2.oo dpjtag.oo dpuncomp.oo dpuser.oo fpga_module.oo
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_fpga_flash/MakefileORI 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOX_FPGA) += dpa3palg.o dpalg.o dpjtag2.o dpjtag.o dpuncomp.o dpuser.o fpga_module.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/fox_io.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/fox_io.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,164 @@
-+/*
-+ fox_io.c
-+ Linux Kernel Driver for FoxBone I/O on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "foxio"
-+#define DEV_MAJOR 190
-+
-+#include "foxbone.h"
-+
-+unsigned char foxio_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_IO_SET 0x4545
-+#define IOCTL_FOXBONE_IO_CLR 0x4546
-+#define IOCTL_FOXBONE_IO_GET 0x4547
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ unsigned int current_io = 0;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_IO_SET:
-+ current_io = foxbone_read(0x0014);
-+ current_io |= (1<<arg);
-+ foxbone_write(0x0014, current_io);
-+ break;
-+
-+ case IOCTL_FOXBONE_IO_CLR:
-+ current_io = foxbone_read(0x0014);
-+ current_io &= ~(1<<arg);
-+ foxbone_write(0x0014, current_io);
-+ break;
-+
-+ case IOCTL_FOXBONE_IO_GET:
-+ retval = foxbone_read(0x0015);
-+ break;
-+
-+
-+ default:
-+ printk("fox_io: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_io: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxio_is_open) {
-+ printk("fox_io: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ printk("fox_io: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxio_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("fox_io: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxio_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_io: FOX-VHDL FPGA io module\n");
-+ //printk("fox_io: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_io: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxio_module_fops)) {
-+ printk( "fox_io: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxio_is_open = 0;
-+ printk("fox_io: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_io: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_io/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_io/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_IO) += fox_io.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/fox_loopback.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/fox_loopback.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,154 @@
-+/*
-+ fox_loopback.c
-+ Linux Kernel Driver for FoxBone Loopback Register on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "loopback"
-+#define DEV_MAJOR 192
-+
-+#include "foxbone.h"
-+
-+unsigned char foxloopback_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_LOOPBACK_SET 0x4045
-+#define IOCTL_FOXBONE_LOOPBACK_GET 0x4046
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ unsigned int current_io = 0;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_LOOPBACK_SET:
-+ foxbone_write(0x0013, arg);
-+ break;
-+
-+ case IOCTL_FOXBONE_LOOPBACK_GET:
-+ retval = foxbone_read(0x0013);
-+ break;
-+
-+ default:
-+ printk("fox_loopback: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_loopback: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxloopback_is_open) {
-+ printk("fox_loopback: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ printk("fox_loopback: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxloopback_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("fox_loopback: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxloopback_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_loopback: FOX-VHDL FPGA io module\n");
-+ //printk("fox_loopback: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_loopback: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxloopback_module_fops)) {
-+ printk( "fox_loopback: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxloopback_is_open = 0;
-+ printk("fox_loopback: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_loopback: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_loopback/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_loopback/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/fox_multiply.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/fox_multiply.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,172 @@
-+/*
-+ fox_multiply.c
-+ Linux Kernel Driver for FoxBone 32x32 fast multiplier on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "multiply"
-+#define DEV_MAJOR 194
-+
-+#include "foxbone.h"
-+
-+unsigned char foxmultiply_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_MUTIPLY 0x4945
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ long data[3], i;
-+ int retval = 0;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_MUTIPLY:
-+ copy_from_user((char*)&data[0], (char*)arg, sizeof(long) * 3);
-+ data[2] = jiffies;
-+ printk("%ld, %ld\n", data[0], data[1]);
-+ //for(i = 0; i < 1024*1024; i++){
-+ foxbone_write(0x0021, (data[0]>>16)&0xffff);
-+ foxbone_write(0x0020, data[0]&0xffff);
-+ foxbone_write(0x0023, (data[1]>>16)&0xffff);
-+ foxbone_write(0x0022, data[1]&0xffff);
-+ data[0] = foxbone_read(0x0025);
-+ data[0] = (data[0] << 16) + foxbone_read(0x0024);
-+ data[1] = foxbone_read(0x0027);
-+ data[1] = (data[1] << 16) + foxbone_read(0x0026);
-+ /*printk("%4x\n", foxbone_read(0x0020));
-+ printk("%4x\n", foxbone_read(0x0021));
-+ printk("%4x\n", foxbone_read(0x0022));
-+ printk("%4x\n", foxbone_read(0x0023));
-+
-+ printk("%4x\n", foxbone_read(0x0024));
-+ printk("%4x\n", foxbone_read(0x0025));
-+ printk("%4x\n", foxbone_read(0x0026));
-+ printk("%4x\n", foxbone_read(0x0027));
-+ */
-+ //};
-+ data[2] = jiffies - data[2];
-+ copy_to_user((char*)arg, (char*)&data[0], sizeof(unsigned long) * 3);
-+ break;
-+
-+ default:
-+ printk("fox_multiply: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_multiply: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxmultiply_is_open) {
-+ printk("fox_multiply: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ //printk("fox_multiply: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ // unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxmultiply_is_open = 0;
-+
-+
-+ // more flaming
-+ //printk("fox_multiply: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxmultiply_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_multiply: FOX-VHDL FPGA multiplier module\n");
-+ //printk("fox_multiply: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_multiply: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxmultiply_module_fops)) {
-+ printk( "fox_multiply: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxmultiply_is_open = 0;
-+ printk("fox_multiply: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_multiply: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_multiply/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_multiply/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/fox_pwm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/fox_pwm.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,180 @@
-+/*
-+ fox_pwm.c
-+ Linux Kernel Driver for FoxBone 16 channel PWM generator on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "pwm"
-+#define DEV_MAJOR 15
-+
-+#include "foxbone.h"
-+
-+unsigned char foxpwm_is_open = 0;
-+
-+
-+#define IOCTL_PWM_ENABLE 0x2310
-+#define IOCTL_PWM_DISABLE 0x2311
-+#define IOCTL_PWM_CHANNEL_BASE 0x2320
-+#define IOCTL_PWM_CHANNEL0 0x2320
-+#define IOCTL_PWM_CHANNEL1 0x2321
-+#define IOCTL_PWM_CHANNEL2 0x2322
-+#define IOCTL_PWM_CHANNEL3 0x2323
-+#define IOCTL_PWM_CHANNEL4 0x2324
-+#define IOCTL_PWM_CHANNEL5 0x2325
-+#define IOCTL_PWM_CHANNEL6 0x2326
-+#define IOCTL_PWM_CHANNEL7 0x2327
-+#define IOCTL_PWM_CHANNEL8 0x2328
-+#define IOCTL_PWM_CHANNEL9 0x2329
-+#define IOCTL_PWM_CHANNELA 0x232a
-+#define IOCTL_PWM_CHANNELB 0x232b
-+#define IOCTL_PWM_CHANNELC 0x232c
-+#define IOCTL_PWM_CHANNELD 0x232d
-+#define IOCTL_PWM_CHANNELE 0x232e
-+#define IOCTL_PWM_CHANNELF 0x232f
-+
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ unsigned int current_pwm;
-+ if((cmd >= IOCTL_PWM_CHANNEL0) && (cmd <= IOCTL_PWM_CHANNELF)){
-+ foxbone_write(0x0050 + (cmd - IOCTL_PWM_CHANNEL_BASE), arg);
-+ } else {
-+ switch (cmd) {
-+ case IOCTL_PWM_ENABLE:
-+ current_pwm = foxbone_read(0x0060);
-+ current_pwm |= (1<<arg);
-+ foxbone_write(0x0060, current_pwm);
-+ break;
-+
-+ case IOCTL_PWM_DISABLE:
-+ current_pwm = foxbone_read(0x0060);
-+ current_pwm &= ~(1<<arg);
-+ foxbone_write(0x0060, current_pwm);
-+ break;
-+
-+ default:
-+ printk("fox_pwm: unknown ioctl\n");
-+ break;
-+ }
-+ };
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_pwm: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxpwm_is_open) {
-+ printk("fox_pwm: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ printk("fox_pwm: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxpwm_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("fox_pwm: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxpwm_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_pwm: FOX-VHDL FPGA PWM module\n");
-+ //printk("fox_pwm: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_pwm: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxpwm_module_fops)) {
-+ printk( "fox_pwm: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxpwm_is_open = 0;
-+ printk("fox_pwm: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_pwm: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_pwm/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_pwm/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,16 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/fox_timebase.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/fox_timebase.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,168 @@
-+/*
-+ fox_timebase.c
-+ Linux Kernel Driver for FoxBone TimeBase on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "timebase"
-+#define DEV_MAJOR 191
-+
-+#include "foxbone.h"
-+
-+unsigned char foxtimebase_is_open = 0;
-+
-+
-+#define IOCTL_FOXBONE_TIMEBASE_ENABLE 0x4645
-+#define IOCTL_FOXBONE_TIMEBASE_DISABLE 0x4646
-+#define IOCTL_FOXBONE_TIMEBASE_SETLO 0x4647
-+#define IOCTL_FOXBONE_TIMEBASE_SETHI 0x4648
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ switch (cmd) {
-+ case IOCTL_FOXBONE_TIMEBASE_ENABLE:
-+ foxbone_write(0x0100, 0x01);
-+ break;
-+
-+ case IOCTL_FOXBONE_TIMEBASE_DISABLE:
-+ foxbone_write(0x0100, 0x00);
-+ break;
-+
-+ case IOCTL_FOXBONE_TIMEBASE_SETLO:
-+ foxbone_write(0x0100, 0x00);
-+ foxbone_write(0x0102, arg);
-+ foxbone_write(0x0100, 0x01);
-+ break;
-+
-+ case IOCTL_FOXBONE_TIMEBASE_SETHI:
-+ foxbone_write(0x0100, 0x00);
-+ foxbone_write(0x0103, arg);
-+ foxbone_write(0x0100, 0x01);
-+ break;
-+
-+ default:
-+ printk("fox_timebase: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("fox_timebase: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(foxtimebase_is_open) {
-+ printk("fox_timebase: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+
-+ // more flaming
-+ printk("fox_timebase: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ foxtimebase_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("fox_timebase: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations foxtimebase_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("fox_timebase: FOX-VHDL FPGA timebase module\n");
-+ //printk("fox_timebase: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("fox_timebase: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &foxtimebase_module_fops)) {
-+ printk( "fox_timebase: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ foxtimebase_is_open = 0;
-+ printk("fox_timebase: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "fox_timebase: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_timebase/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_timebase/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/fb.bak 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,661 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/uaccess.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+
-+#include "foxbone.h"
-+
-+
-+#if 0
-+#define DBG(x) x
-+#else
-+#define DBG(x)
-+#endif
-+
-+
-+
-+// software delay
-+void FOXVHDL_delay(int ms) {
-+ int i,a;
-+ int delayvar=10;
-+
-+ for (a=0;a<ms;a++) {
-+ for (i=0;i<35;i++) {
-+ delayvar*=2;
-+ delayvar/=2;
-+ }
-+ }
-+}
-+
-+
-+
-+/*
-+||
-+|| FOXVHDL CTL functions
-+||
-+*/
-+
-+
-+static unsigned char FOXVHDL_current_bank = 0xff;
-+
-+static unsigned char blitting = 1;
-+
-+static unsigned char refreshrate = 6;
-+
-+
-+
-+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
-+ // translate the three color passed in a single 16 bit color word
-+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
-+ return result;
-+}
-+
-+
-+
-+
-+// wait until the videostate pin has the wanted value
-+void FOXVHDL_wait_videostate(unsigned char wait_state){
-+/* unsigned char vid_state = 0;
-+ unsigned int max_error = 0xffff;
-+ //printk("Start wait\n");
-+ do {
-+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
-+ max_error--;
-+ } while((vid_state != wait_state)&&(max_error > 10));
-+ */
-+ DBG(if(max_error < 11){printk("Stop wait\n");};)
-+};
-+
-+
-+// choose the bank that we want to display
-+// OG5 == 0 --> Bank0
-+// OG5 == 1 --> Bank1
-+void FOXVHDL_set_bank(unsigned char bank){
-+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
-+ if(FOXVHDL_current_bank == bank){
-+ return;
-+ };
-+
-+ DBG(printk("FOXVHDL_set_bank\n");)
-+
-+ FOXVHDL_current_bank = bank;
-+ foxbone_write(0x7001, FOXVHDL_current_bank);
-+
-+
-+};
-+
-+
-+// blit the bank
-+void FOXVHDL_swap_bank(void){
-+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));
-+};
-+
-+
-+// initialise the I/O pins
-+void FOXVHDL_init(void){
-+ DBG(printk("FOXVHDL_init\n");)
-+
-+ FOXVHDL_current_bank = 0;
-+
-+ FOXVHDL_set_bank(1);
-+
-+};
-+
-+/*
-+||
-+|| FOXVHDL IMAGE FUNCTIONS
-+||
-+*/
-+#define Fox_line_WriteData (1<<2)
-+
-+void FOXVHDL_blit(unsigned short int *image){
-+ unsigned long i;
-+ unsigned int fb_ctl_reg;
-+
-+ if(blitting){
-+ // reset the address pointer
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ fb_ctl_reg |= (1<<4);
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ fb_ctl_reg &= ~(1<<4);
-+ foxbone_write(0x7001, fb_ctl_reg);
-+
-+ foxbone_write(0x7000, image[0]);
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+
-+ for(i = 1; i < 640 * 400; i++){
-+
-+ *R_PORT_G_DATA = port_g_data_shadow =
-+ (port_g_data_shadow & 0xff0000ff) | image[i]<<8;
-+ *R_PORT_G_DATA = port_g_data_shadow |= Fox_line_WriteData;
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+ };
-+ for(i = 0; i <6144; i++){
-+ foxbone_write_next(0);
-+ };
-+ FOXVHDL_swap_bank();
-+ };
-+};
-+
-+
-+
-+
-+
-+
-+/*
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||
-+|| FRAMEBUFFER CODE
-+||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+
-+*/
-+
-+
-+
-+
-+#define VIDEOMEMSIZE (640 * 400 * 2) //512K
-+
-+static void *videomemory;
-+static u_long videomemorysize = VIDEOMEMSIZE;
-+
-+static unsigned char fb_started = 0;
-+
-+static struct fb_var_screeninfo foxfb_default __initdata = {
-+ .xres = 640,
-+ .yres = 400,
-+ .xres_virtual = 640,
-+ .yres_virtual = 400,
-+ .bits_per_pixel = 16,
-+ .red = { 0, 5, 0 },
-+ .green = { 5, 6, 0 },
-+ .blue = { 11, 5, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .height = -1,
-+ .width = -1,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo foxfb_fix __initdata = {
-+ .id = "FOX-VHDL FB",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 1,
-+ .ypanstep = 1,
-+ .ywrapstep = 1,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_set_par(struct fb_info *info);
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
-+
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+static struct fb_ops foxfb_ops = {
-+ .fb_check_var = foxfb_check_var,
-+ .fb_set_par = foxfb_set_par,
-+ .fb_setcolreg = foxfb_setcolreg,
-+
-+ .fb_pan_display = foxfb_pan_display,
-+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect,
-+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea,
-+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit,
-+ .fb_mmap = foxfb_mmap,
-+ .fb_ioctl = foxfb_ioctl,
-+};
-+
-+// this function is defined in fbmem.c
-+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+// this should be a free one
-+#define FOX_FBIOGET_SCREEN 0x4642
-+#define FOX_FBBLIT 0x4643
-+#define FOX_FB_RATE 0x4645
-+#define FOX_FB_TFT 0x4646
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
-+ void __user *argp = (void __user *)arg;
-+ unsigned int fb_ctl_reg;
-+ switch(cmd){
-+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
-+ case FOX_FBIOGET_SCREEN:
-+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
-+ return 0;
-+ } else {
-+ return -1;
-+ };
-+ case FOX_FBBLIT:
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ if(arg){
-+ printk("Enable FB\n");
-+ fb_ctl_reg &= ~(1<<1);
-+ } else {
-+ printk("Disable FB\n");
-+ fb_ctl_reg |= (1<<1);
-+ };
-+ blitting = arg;
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ break;
-+ case FOX_FB_RATE:
-+ if((arg > 9) || (arg < 1)){
-+ printk("fb0 : Illegal refreshrate\n");
-+ break;
-+ };
-+ refreshrate = arg;
-+ printk("fb0 : new refreshrate\n");
-+ break;
-+ case FOX_FB_TFT:
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ if(arg){
-+ printk("Enable TFT\n");
-+ fb_ctl_reg |= (1<<3);
-+ } else {
-+ printk("Disable TFT\n");
-+ fb_ctl_reg &= ~(1<<3);
-+ };
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ break;
-+ default:
-+ return fb_ioctl(inode, file, cmd, arg);
-+ };
-+ return 0;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
-+ cfb_fillrect(info, rect);
-+};
-+
-+
-+// TODO add our own optimized code here
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
-+ cfb_copyarea(info, area);
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
-+ cfb_imageblit(info, image);
-+};
-+
-+
-+/*
-+ * Internal routines
-+ */
-+
-+static u_long get_line_length(int xres_virtual, int bpp)
-+{
-+ u_long length;
-+
-+ length = xres_virtual * bpp;
-+ length = (length + 31) & ~31;
-+ length >>= 3;
-+ return (length);
-+}
-+
-+ /*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ u_long line_length;
-+
-+ if (var->vmode & FB_VMODE_CONUPDATE) {
-+ var->vmode |= FB_VMODE_YWRAP;
-+ var->xoffset = info->var.xoffset;
-+ var->yoffset = info->var.yoffset;
-+ }
-+
-+ var->xres = 640;
-+ var->yres = 400;
-+
-+ var->bits_per_pixel = 16;
-+
-+ if (var->xres_virtual < var->xoffset + var->xres)
-+ var->xres_virtual = var->xoffset + var->xres;
-+ if (var->yres_virtual < var->yoffset + var->yres)
-+ var->yres_virtual = var->yoffset + var->yres;
-+
-+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-+ if (line_length * var->yres_virtual > videomemorysize)
-+ return -ENOMEM;
-+
-+ var->red.offset = 0;
-+ var->red.length = 5;
-+ var->green.offset = 5;
-+ var->green.length = 6;
-+ var->blue.offset = 11;
-+ var->blue.length = 5;
-+ var->transp.offset = 0;
-+ var->transp.length = 0;
-+ var->red.msb_right = 0;
-+ var->green.msb_right = 0;
-+ var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+
-+/* This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int foxfb_set_par(struct fb_info *info){
-+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
-+ return 0;
-+}
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+
-+
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
-+ if (regno >= 256) /* no. of hw registers */
-+ return 1;
-+
-+ /* grayscale works only partially under directcolor */
-+ if (info->var.grayscale) {
-+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
-+ red = green = blue =
-+ (red * 77 + green * 151 + blue * 28) >> 8;
-+ }
-+
-+ /* Directcolor:
-+ * var->{color}.offset contains start of bitfield
-+ * var->{color}.length contains length of bitfield
-+ * {hardwarespecific} contains width of RAMDAC
-+ * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
-+ * RAMDAC[X] is programmed to (red, green, blue)
-+ *
-+ * Pseudocolor:
-+ * uses offset = 0 && length = RAMDAC register width.
-+ * var->{color}.offset is 0
-+ * var->{color}.length contains widht of DAC
-+ * cmap is not used
-+ * RAMDAC[X] is programmed to (red, green, blue)
-+ * Truecolor:
-+ * does not use DAC. Usually 3 are present.
-+ * var->{color}.offset contains start of bitfield
-+ * var->{color}.length contains length of bitfield
-+ * cmap is programmed to (red << red.offset) | (green << green.offset) |
-+ * (blue << blue.offset) | (transp << transp.offset)
-+ * RAMDAC does not exist
-+ */
-+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ red = CNVT_TOHW(red, info->var.red.length);
-+ green = CNVT_TOHW(green, info->var.green.length);
-+ blue = CNVT_TOHW(blue, info->var.blue.length);
-+ transp = CNVT_TOHW(transp, info->var.transp.length);
-+ break;
-+ case FB_VISUAL_DIRECTCOLOR:
-+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
-+ green = CNVT_TOHW(green, 8);
-+ blue = CNVT_TOHW(blue, 8);
-+ /* hey, there is bug in transp handling... */
-+ transp = CNVT_TOHW(transp, 8);
-+ break;
-+ }
-+#undef CNVT_TOHW
-+ /* Truecolor has hardware independent palette */
-+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-+ u32 v;
-+
-+ if (regno >= 16)
-+ return 1;
-+
-+ v = (red << info->var.red.offset) |
-+ (green << info->var.green.offset) |
-+ (blue << info->var.blue.offset) |
-+ (transp << info->var.transp.offset);
-+ switch (info->var.bits_per_pixel) {
-+ case 8:
-+ break;
-+ case 16:
-+ ((u32 *) (info->pseudo_palette))[regno] = v;
-+ break;
-+ case 24:
-+ case 32:
-+ ((u32 *) (info->pseudo_palette))[regno] = v;
-+ break;
-+ }
-+ return 0;
-+ }
-+ return 0;
-+}
-+
-+ /*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+
-+/*
-+ * Most drivers don't need their own mmap function
-+ */
-+
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
-+ unsigned long page, pos;
-+ unsigned long start = vma->vm_start;
-+ unsigned long size = vma->vm_end-vma->vm_start;
-+ printk("mmap : %ld %ld\n", size, info->fix.smem_len);
-+ //if (size > info->fix.smem_len){
-+ // return -EINVAL;
-+ //}
-+ printk("MMAP2\n");
-+ pos = (unsigned long) info->screen_base;
-+ while (size > 0) {
-+ page = page_to_pfn(vmalloc_to_page((void *)pos));
-+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-+ return -EAGAIN;
-+ start += PAGE_SIZE;
-+ pos += PAGE_SIZE;
-+ if (size > PAGE_SIZE)
-+ size -= PAGE_SIZE;
-+ else
-+ size = 0;
-+ }
-+ return 0;
-+}
-+
-+
-+
-+
-+
-+// our timer
-+struct timer_list foxfb_timer;
-+
-+
-+// the prototype for the callback
-+static void foxfb_timer_callback(unsigned long ptr);
-+
-+
-+// setup the mmc timer
-+static void foxfb_timer_setup(void){
-+ init_timer(&foxfb_timer);
-+ foxfb_timer.function = foxfb_timer_callback;
-+ foxfb_timer.data = 0;
-+ foxfb_timer.expires = jiffies + ( HZ / refreshrate);
-+ add_timer(&foxfb_timer);
-+};
-+
-+
-+// the timer callback function that detects if the card status has changed
-+static void foxfb_timer_callback(unsigned long ptr){
-+ del_timer(&foxfb_timer);
-+ FOXVHDL_blit(videomemory);
-+ foxfb_timer_setup();
-+};
-+
-+
-+static void foxfb_platform_release(struct device *device){
-+ // This is called when the reference count goes to zero.
-+}
-+
-+
-+static int __init foxfb_probe(struct platform_device *dev){
-+ struct fb_info *info;
-+ int retval = -ENOMEM;
-+
-+ if (!(videomemory = vmalloc(videomemorysize)))
-+ return retval;
-+
-+ memset(videomemory, 0, videomemorysize);
-+
-+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
-+ if (!info)
-+ goto err;
-+
-+ info->screen_base = (char*)videomemory;
-+ info->fbops = &foxfb_ops;
-+ info->fix.smem_len = videomemorysize;
-+ retval = fb_find_mode(&info->var, info, NULL,
-+ NULL, 0, NULL, 8);
-+
-+ if (!retval || (retval == 4))
-+ info->var = foxfb_default;
-+
-+ info->fix = foxfb_fix;
-+ info->pseudo_palette = info->par;
-+ info->par = NULL;
-+ info->flags = FBINFO_FLAG_DEFAULT;
-+
-+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (retval < 0)
-+ goto err1;
-+
-+ retval = register_framebuffer(info);
-+ if (retval < 0)
-+ goto err2;
-+ platform_set_drvdata(dev, info);
-+
-+ printk(KERN_INFO
-+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
-+ info->node, videomemorysize >> 10);
-+
-+
-+ //FOXVHDL_blit(videomemory);
-+ foxfb_timer_setup();
-+ return 0;
-+err2:
-+ fb_dealloc_cmap(&info->cmap);
-+err1:
-+ framebuffer_release(info);
-+err:
-+ vfree(videomemory);
-+ return retval;
-+}
-+
-+static int foxfb_remove(struct platform_device *dev)
-+{
-+ struct fb_info *info = platform_get_drvdata(dev);
-+
-+ if (info) {
-+ unregister_framebuffer(info);
-+ vfree(videomemory);
-+ framebuffer_release(info);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver foxfb_driver = {
-+ .probe = foxfb_probe,
-+ .remove = foxfb_remove,
-+ .driver = {
-+ .name = "foxfb",
-+ },
-+};
-+
-+static struct platform_device foxfb_device = {
-+ .name = "foxfb",
-+ .id = 0,
-+ .dev = {
-+ .release = foxfb_platform_release,
-+ }
-+};
-+
-+static int __init foxfb_init(void)
-+{
-+ int ret = 0;
-+ refreshrate = 8;
-+ printk(KERN_INFO "fb: Initialising framebuffer\n");
-+
-+ FOXVHDL_init();
-+
-+ ret = platform_driver_register(&foxfb_driver);
-+
-+ if (!ret) {
-+ ret = platform_device_register(&foxfb_device);
-+ if (ret)
-+ platform_driver_unregister(&foxfb_driver);
-+ }
-+ fb_started = 1;
-+ return ret;
-+}
-+
-+static void __exit foxfb_exit(void)
-+{
-+ platform_device_unregister(&foxfb_device);
-+ platform_driver_unregister(&foxfb_driver);
-+}
-+
-+module_exit(foxfb_exit);
-+module_init(foxfb_init);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
-+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxbone.h 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,20 @@
-+// prototypes for foxbone compliant modules
-+
-+extern unsigned int FOXBONE_release;
-+extern unsigned int FOXBONE_application1;
-+extern unsigned int FOXBONE_application2;
-+extern unsigned int FOXBONE_application3;
-+
-+void foxbone_write(unsigned int add, unsigned int data);
-+
-+unsigned int foxbone_read(unsigned int add);
-+
-+void foxbone_write_next(unsigned data);
-+
-+unsigned int foxbone_read_next(void);
-+
-+void foxbone_initialise_bus(void);
-+
-+void foxbone_lock(void);
-+
-+void foxbone_unlock(void);
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/foxvhdlfb.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,691 @@
-+/*
-+ foxvhdlfb.c
-+ Linux Kernel Driver for FoxBone FrameBuffer on FOX VHDL Board
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/tty.h>
-+#include <linux/slab.h>
-+#include <linux/vmalloc.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/uaccess.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+
-+#include "foxbone.h"
-+
-+
-+#if 0
-+#define DBG(x) x
-+#else
-+#define DBG(x)
-+#endif
-+
-+
-+/*
-+||
-+|| FOXVHDL CTL functions
-+||
-+*/
-+
-+
-+static unsigned char FOXVHDL_current_bank = 0xff;
-+
-+static unsigned char blitting = 1;
-+
-+static unsigned char refreshrate = 6;
-+
-+
-+
-+unsigned int FOXVHDL_translate_BGR(unsigned char blue, unsigned char green, unsigned char red) {
-+ // translate the three color passed in a single 16 bit color word
-+ unsigned int result = ((blue>>3)<<11) | ((green>>2)<<5) | (red>>3);
-+ return result;
-+}
-+
-+
-+
-+
-+// wait until the videostate pin has the wanted value
-+void FOXVHDL_wait_videostate(unsigned char wait_state){
-+/* unsigned char vid_state = 0;
-+ unsigned int max_error = 0xffff;
-+ //printk("Start wait\n");
-+ do {
-+ vid_state = FOXVHDL_get_bit_B(Fox_line_VideoState);
-+ max_error--;
-+ } while((vid_state != wait_state)&&(max_error > 10));
-+ */
-+ DBG(if(max_error < 11){printk("Stop wait\n");};)
-+};
-+
-+
-+// choose the bank that we want to display
-+// OG5 == 0 --> Bank0
-+// OG5 == 1 --> Bank1
-+void FOXVHDL_set_bank(unsigned char bank){
-+ DBG(printk("%d, %d\n",FOXVHDL_current_bank, bank);)
-+ if(FOXVHDL_current_bank == bank){
-+ return;
-+ };
-+
-+ DBG(printk("FOXVHDL_set_bank\n");)
-+
-+ FOXVHDL_current_bank = bank;
-+ foxbone_write(0x7001, FOXVHDL_current_bank);
-+
-+
-+};
-+
-+
-+// blit the bank
-+void FOXVHDL_swap_bank(void){
-+ FOXVHDL_set_bank((FOXVHDL_current_bank)?(0):(1));
-+};
-+
-+
-+// initialise the I/O pins
-+void FOXVHDL_init(void){
-+ DBG(printk("FOXVHDL_init\n");)
-+
-+ FOXVHDL_current_bank = 0;
-+
-+ FOXVHDL_set_bank(1);
-+
-+};
-+
-+/*
-+||
-+|| FOXVHDL IMAGE FUNCTIONS
-+||
-+*/
-+#define Fox_line_WriteData (1<<2)
-+
-+// for performance reasons, we do not use the foxbone access functions here
-+// we rather use an optimised algorithm. blitting now only takes about 6 ms.
-+// meaning we can that effectivley achieve 17 frame. however the refresh rate by
-+// default is 4 fps
-+
-+#if 0
-+#define DBG_TIMER(x) x
-+#else
-+#define DBG_TIMER(x)
-+#endif
-+
-+#if 0
-+#define DOUBLE_DATA_RATE
-+#endif
-+
-+void FOXVHDL_blit(unsigned short int *image){
-+ unsigned long i;
-+ unsigned int fb_ctl_reg;
-+
-+ if(blitting){
-+ foxbone_lock();
-+ DBG_TIMER(unsigned long j = jiffies;)
-+ // reset the address pointer
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ fb_ctl_reg |= (1<<4);
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ fb_ctl_reg &= ~(1<<4);
-+ foxbone_write(0x7001, fb_ctl_reg);
-+
-+ foxbone_write(0x7000, image[0]);
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
-+ *R_GEN_CONFIG = genconfig_shadow;
-+
-+ *R_PORT_G_DATA = port_g_data_shadow = (port_g_data_shadow & 0xff0000ff);
-+
-+
-+#ifdef DOUBLE_DATA_RATE
-+
-+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff);
-+ for(i = 1; i < 640 * 400; i+=2){
-+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8 | Fox_line_WriteData;
-+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i+1]<<8;
-+ };
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+
-+#else
-+
-+ unsigned long def_val = (port_g_data_shadow & 0xff0000ff) | Fox_line_WriteData;
-+ for(i = 1; i < 640 * 400; i++){
-+ *R_PORT_G_DATA = port_g_data_shadow = def_val | image[i]<<8;
-+ *R_PORT_G_DATA = port_g_data_shadow &= ~Fox_line_WriteData;
-+ };
-+#endif
-+ foxbone_unlock();
-+ FOXVHDL_swap_bank();
-+ DBG_TIMER(printk("%ld\n", jiffies - j);)
-+
-+ };
-+};
-+
-+
-+
-+
-+
-+
-+/*
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||
-+|| FRAMEBUFFER CODE
-+||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
-+
-+*/
-+
-+
-+
-+
-+#define VIDEOMEMSIZE (640 * 400 * 2) //512K
-+
-+static void *videomemory;
-+static u_long videomemorysize = VIDEOMEMSIZE;
-+
-+static unsigned char fb_started = 0;
-+
-+static unsigned char fb_update = 0;
-+
-+static unsigned char fb_mmap_enable = 0;
-+
-+static struct fb_var_screeninfo foxfb_default __initdata = {
-+ .xres = 640,
-+ .yres = 400,
-+ .xres_virtual = 640,
-+ .yres_virtual = 400,
-+ .bits_per_pixel = 16,
-+ .red = { 0, 5, 0 },
-+ .green = { 5, 6, 0 },
-+ .blue = { 11, 5, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .height = -1,
-+ .width = -1,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo foxfb_fix __initdata = {
-+ .id = "FOX-VHDL FB",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 1,
-+ .ypanstep = 1,
-+ .ywrapstep = 1,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_set_par(struct fb_info *info);
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image);
-+
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+static struct fb_ops foxfb_ops = {
-+ .fb_check_var = foxfb_check_var,
-+ .fb_set_par = foxfb_set_par,
-+ .fb_setcolreg = foxfb_setcolreg,
-+
-+ .fb_pan_display = foxfb_pan_display,
-+ .fb_fillrect = foxfb_fillrect, //cfb_fillrect,
-+ .fb_copyarea = foxfb_copyarea, //cfb_copyarea,
-+ .fb_imageblit = foxfb_imageblit,//cfb_imageblit,
-+ .fb_mmap = foxfb_mmap,
-+ .fb_ioctl = foxfb_ioctl,
-+};
-+
-+// this function is defined in fbmem.c
-+extern int fb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-+
-+// this should be a free one
-+#define FOX_FBIOGET_SCREEN 0x4642
-+#define FOX_FBBLIT 0x4643
-+#define FOX_FB_RATE 0x4645
-+#define FOX_FB_TFT 0x4646
-+static int foxfb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg){
-+ void __user *argp = (void __user *)arg;
-+ unsigned int fb_ctl_reg;
-+ switch(cmd){
-+ // this assumes that arg points to a VIDEOMEMSIZE area of memory in user space
-+ case FOX_FBIOGET_SCREEN:
-+ if(copy_to_user(argp, videomemory, VIDEOMEMSIZE)){
-+ return 0;
-+ } else {
-+ return -1;
-+ };
-+ case FOX_FBBLIT:
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ if(arg){
-+ printk("Enable FB\n");
-+ fb_ctl_reg &= ~(1<<1);
-+ } else {
-+ printk("Disable FB\n");
-+ fb_ctl_reg |= (1<<1);
-+ };
-+ blitting = arg;
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ break;
-+ case FOX_FB_RATE:
-+ if((arg > 9) || (arg < 1)){
-+ printk("fb0 : Illegal refreshrate\n");
-+ break;
-+ };
-+ refreshrate = arg;
-+ printk("fb0 : new refreshrate\n");
-+ break;
-+ case FOX_FB_TFT:
-+ fb_ctl_reg = foxbone_read(0x7001);
-+ if(arg){
-+ printk("Enable TFT\n");
-+ fb_ctl_reg |= (1<<3);
-+ } else {
-+ printk("Disable TFT\n");
-+ fb_ctl_reg &= ~(1<<3);
-+ };
-+ foxbone_write(0x7001, fb_ctl_reg);
-+ break;
-+ default:
-+ return fb_ioctl(inode, file, cmd, arg);
-+ };
-+ return 0;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect){
-+ cfb_fillrect(info, rect);
-+ fb_update = 1;
-+};
-+
-+
-+// TODO add our own optimized code here
-+static void foxfb_copyarea(struct fb_info *info, const struct fb_copyarea *area){
-+ cfb_copyarea(info, area);
-+ fb_update = 1;
-+};
-+
-+// TODO add our own optimized code here
-+static void foxfb_imageblit(struct fb_info *info, const struct fb_image *image){
-+ cfb_imageblit(info, image);
-+ fb_update = 1;
-+};
-+
-+
-+/*
-+ * Internal routines
-+ */
-+
-+static u_long get_line_length(int xres_virtual, int bpp)
-+{
-+ u_long length;
-+
-+ length = xres_virtual * bpp;
-+ length = (length + 31) & ~31;
-+ length >>= 3;
-+ return (length);
-+}
-+
-+ /*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+
-+static int foxfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ u_long line_length;
-+
-+ if (var->vmode & FB_VMODE_CONUPDATE) {
-+ var->vmode |= FB_VMODE_YWRAP;
-+ var->xoffset = info->var.xoffset;
-+ var->yoffset = info->var.yoffset;
-+ }
-+
-+ var->xres = 640;
-+ var->yres = 400;
-+
-+ var->bits_per_pixel = 16;
-+
-+ if (var->xres_virtual < var->xoffset + var->xres)
-+ var->xres_virtual = var->xoffset + var->xres;
-+ if (var->yres_virtual < var->yoffset + var->yres)
-+ var->yres_virtual = var->yoffset + var->yres;
-+
-+ line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
-+ if (line_length * var->yres_virtual > videomemorysize)
-+ return -ENOMEM;
-+
-+ var->red.offset = 0;
-+ var->red.length = 5;
-+ var->green.offset = 5;
-+ var->green.length = 6;
-+ var->blue.offset = 11;
-+ var->blue.length = 5;
-+ var->transp.offset = 0;
-+ var->transp.length = 0;
-+ var->red.msb_right = 0;
-+ var->green.msb_right = 0;
-+ var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+
-+/* This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int foxfb_set_par(struct fb_info *info){
-+ info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel);
-+ return 0;
-+}
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+
-+
-+static int foxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info){
-+ if (regno >= 256) /* no. of hw registers */
-+ return 1;
-+
-+ /* grayscale works only partially under directcolor */
-+ if (info->var.grayscale) {
-+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
-+ red = green = blue =
-+ (red * 77 + green * 151 + blue * 28) >> 8;
-+ }
-+
-+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ red = CNVT_TOHW(red, info->var.red.length);
-+ green = CNVT_TOHW(green, info->var.green.length);
-+ blue = CNVT_TOHW(blue, info->var.blue.length);
-+ transp = CNVT_TOHW(transp, info->var.transp.length);
-+ break;
-+ case FB_VISUAL_DIRECTCOLOR:
-+ red = CNVT_TOHW(red, 8); /* expect 8 bit DAC */
-+ green = CNVT_TOHW(green, 8);
-+ blue = CNVT_TOHW(blue, 8);
-+ /* hey, there is bug in transp handling... */
-+ transp = CNVT_TOHW(transp, 8);
-+ break;
-+ }
-+#undef CNVT_TOHW
-+ /* Truecolor has hardware independent palette */
-+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-+ u32 v;
-+
-+ if (regno >= 16)
-+ return 1;
-+
-+ v = (red << info->var.red.offset) |
-+ (green << info->var.green.offset) |
-+ (blue << info->var.blue.offset) |
-+ (transp << info->var.transp.offset);
-+ switch (info->var.bits_per_pixel) {
-+ case 8:
-+ break;
-+ case 16:
-+ ((u32 *) (info->pseudo_palette))[regno] = v;
-+ break;
-+ case 24:
-+ case 32:
-+ ((u32 *) (info->pseudo_palette))[regno] = v;
-+ break;
-+ }
-+ return 0;
-+ }
-+ return 0;
-+}
-+
-+
-+static int foxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info){
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+
-+
-+static int foxfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma){
-+ unsigned long page, pos;
-+ unsigned long start = vma->vm_start;
-+ unsigned long size = vma->vm_end-vma->vm_start;
-+ fb_mmap_enable = 1;
-+ printk("mmap : %ld %ld\n", size, (long)info->fix.smem_len);
-+ //if (size > info->fix.smem_len){
-+ // return -EINVAL;
-+ //}
-+ pos = (unsigned long) info->screen_base;
-+ while (size > 0) {
-+ page = page_to_pfn(vmalloc_to_page((void *)pos));
-+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-+ return -EAGAIN;
-+ start += PAGE_SIZE;
-+ pos += PAGE_SIZE;
-+ if (size > PAGE_SIZE)
-+ size -= PAGE_SIZE;
-+ else
-+ size = 0;
-+ }
-+ return 0;
-+}
-+
-+
-+// our timer
-+struct timer_list foxfb_timer;
-+
-+// are we currently blitting ?
-+static unsigned char we_are_blitting = 0;
-+
-+// the prototype for the callback
-+static void foxfb_timer_callback(unsigned long ptr);
-+
-+
-+static void tasklet_foxfb(unsigned long data);
-+DECLARE_TASKLET(tl_foxfb_descr, tasklet_foxfb, 0L);
-+static void tasklet_foxfb(unsigned long data){
-+ if(fb_update || fb_mmap_enable ){
-+ FOXVHDL_blit(videomemory);
-+ } else {
-+ DBG(printk("FBWAIT");)
-+ };
-+ we_are_blitting = 0;
-+ fb_update = 0;
-+}
-+
-+
-+// setup the fb timer
-+static void foxfb_timer_setup(void){
-+ init_timer(&foxfb_timer);
-+ foxfb_timer.function = foxfb_timer_callback;
-+ foxfb_timer.data = 0;
-+ foxfb_timer.expires = jiffies + ( HZ / refreshrate);
-+ add_timer(&foxfb_timer);
-+};
-+
-+
-+// the timer callback function that detects if the card status has changed
-+static void foxfb_timer_callback(unsigned long ptr){
-+ if((!we_are_blitting)){
-+ we_are_blitting = 1;
-+ del_timer(&foxfb_timer);
-+ tasklet_schedule(&tl_foxfb_descr);
-+ foxfb_timer_setup();
-+ };
-+};
-+
-+
-+static void foxfb_platform_release(struct device *device){
-+ // This is called when the reference count goes to zero.
-+}
-+
-+
-+static int __init foxfb_probe(struct platform_device *dev){
-+ struct fb_info *info;
-+ int retval = -ENOMEM;
-+
-+ if (!(videomemory = vmalloc(videomemorysize)))
-+ return retval;
-+
-+ memset(videomemory, 0, videomemorysize);
-+
-+ info = framebuffer_alloc(sizeof(u32) * 256, &dev->dev);
-+ if (!info)
-+ goto err;
-+
-+ info->screen_base = (char*)videomemory;
-+ info->fbops = &foxfb_ops;
-+ info->fix.smem_len = videomemorysize;
-+ retval = fb_find_mode(&info->var, info, NULL,
-+ NULL, 0, NULL, 8);
-+
-+ if (!retval || (retval == 4))
-+ info->var = foxfb_default;
-+
-+ info->fix = foxfb_fix;
-+ info->pseudo_palette = info->par;
-+ info->par = NULL;
-+ info->flags = FBINFO_FLAG_DEFAULT;
-+ //info->cursor.mode &= ~CURSOR_BLINK;
-+ retval = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (retval < 0)
-+ goto err1;
-+
-+ retval = register_framebuffer(info);
-+ if (retval < 0)
-+ goto err2;
-+ platform_set_drvdata(dev, info);
-+
-+ printk(KERN_INFO
-+ "fb%d: FOX-VHDL frame buffer device, using %ldK of video memory\n",
-+ info->node, videomemorysize >> 10);
-+
-+
-+ //FOXVHDL_blit(videomemory);
-+ foxfb_timer_setup();
-+ return 0;
-+err2:
-+ fb_dealloc_cmap(&info->cmap);
-+err1:
-+ framebuffer_release(info);
-+err:
-+ vfree(videomemory);
-+ return retval;
-+}
-+
-+static int foxfb_remove(struct platform_device *dev)
-+{
-+ struct fb_info *info = platform_get_drvdata(dev);
-+
-+ if (info) {
-+ unregister_framebuffer(info);
-+ vfree(videomemory);
-+ framebuffer_release(info);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver foxfb_driver = {
-+ .probe = foxfb_probe,
-+ .remove = foxfb_remove,
-+ .driver = {
-+ .name = "foxfb",
-+ },
-+};
-+
-+static struct platform_device foxfb_device = {
-+ .name = "foxfb",
-+ .id = 0,
-+ .dev = {
-+ .release = foxfb_platform_release,
-+ }
-+};
-+
-+static int __init foxfb_init(void)
-+{
-+ int ret = 0;
-+ refreshrate = 8;
-+ printk(KERN_INFO "fb: Initialising framebuffer\n");
-+
-+ FOXVHDL_init();
-+
-+ ret = platform_driver_register(&foxfb_driver);
-+
-+ if (!ret) {
-+ ret = platform_device_register(&foxfb_device);
-+ if (ret)
-+ platform_driver_unregister(&foxfb_driver);
-+ }
-+ fb_started = 1;
-+ return ret;
-+}
-+
-+static void __exit foxfb_exit(void)
-+{
-+ platform_device_unregister(&foxfb_device);
-+ platform_driver_unregister(&foxfb_driver);
-+}
-+
-+module_exit(foxfb_exit);
-+module_init(foxfb_init);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("K. John '2B|!2B' Crispin");
-+MODULE_DESCRIPTION("FOX-VHDL Framebuffer Driver");
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/fox_vhdl_fb/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/fox_vhdl_fb/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,5 @@
-+# Makefile for fox_vhdl drivers
-+# 23.04.2006 <mailto:john@phrozen.org>
-+
-+# the fox_vhdl_framebuffer driver
-+obj-$(CONFIG_FOX_VHDL_FB) += foxvhdlfb.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig linux-2.6.19.2/drivers/fox-vhdl/Kconfig
---- linux-2.6.19.2.orig/drivers/fox-vhdl/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,274 @@
-+menu "Acmesystems FPGA"
-+
-+config FOX_VHDL
-+ bool "Support for FOX-VHDL Board"
-+ default n
-+
-+config FOX_FPGA
-+ bool "FPGA flash module"
-+ depends on FOX_VHDL
-+ help
-+ Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+ bool "Basic FOXBONE support"
-+ depends on FOX_VHDL
-+ help
-+ Include this to get basic FOXBONE support
-+
-+config VT
-+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+ select INPUT
-+ default y if !VIOCONS
-+ ---help---
-+ If you say Y here, you will get support for terminal devices with
-+ display and keyboard devices. These are called "virtual" because you
-+ can run several virtual terminals (also called virtual consoles) on
-+ one physical terminal. This is rather useful, for example one
-+ virtual terminal can collect system messages and warnings, another
-+ one can be used for a text-mode user session, and a third could run
-+ an X session, all in parallel. Switching between virtual terminals
-+ is done with certain key combinations, usually Alt-<function key>.
-+
-+ The setterm command ("man setterm") can be used to change the
-+ properties (such as colors or beeping) of a virtual terminal. The
-+ man page console_codes(4) ("man console_codes") contains the special
-+ character sequences that can be used to change those properties
-+ directly. The fonts used on virtual terminals can be changed with
-+ the setfont ("man setfont") command and the key bindings are defined
-+ with the loadkeys ("man loadkeys") command.
-+
-+ You need at least one virtual terminal device in order to make use
-+ of your keyboard and monitor. Therefore, only people configuring an
-+ embedded system would want to say N here in order to save some
-+ memory; the only way to log into such a system is then via a serial
-+ or network connection.
-+
-+ If unsure, say Y, or else you won't be able to do much with your new
-+ shiny Linux system :-)
-+
-+
-+menu "Framebuffer"
-+depends on VT
-+
-+config FB
-+ bool "Support for frame buffer devices"
-+ depends on VT
-+ ---help---
-+ The frame buffer device provides an abstraction for the graphics
-+ hardware. It represents the frame buffer of some video hardware and
-+ allows application software to access the graphics hardware through
-+ a well-defined interface, so the software doesn't need to know
-+ anything about the low-level (hardware register) stuff.
-+
-+ Frame buffer devices work identically across the different
-+ architectures supported by Linux and make the implementation of
-+ application programs easier and more portable; at this point, an X
-+ server exists which uses the frame buffer device exclusively.
-+ On several non-X86 architectures, the frame buffer device is the
-+ only way to use the graphics hardware.
-+
-+ The device is accessed through special device nodes, usually located
-+ in the /dev directory, i.e. /dev/fb*.
-+
-+ You need an utility program called fbset to make full use of frame
-+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+ and the Framebuffer-HOWTO at
-+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+ information.
-+
-+ Say Y here and to the driver for your graphics board below if you
-+ are compiling a kernel for a non-x86 architecture.
-+
-+ If you are compiling for the x86 architecture, you can say Y if you
-+ want to play with it, but it is not essential. Please note that
-+ running graphical applications that directly touch the hardware
-+ (e.g. an accelerated X server) and that are not frame buffer
-+ device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_fillrect function for generic software rectangle
-+ filling. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_copyarea function for generic software area copying.
-+ This is used by drivers that don't provide their own (accelerated)
-+ version.
-+
-+config FB_CFB_IMAGEBLIT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_imageblit function for generic software image
-+ blitting. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+config DUMMY_CONSOLE
-+ bool "Dummy Console"
-+ depends on FB
-+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
-+ default n
-+
-+config FRAMEBUFFER_CONSOLE
-+ bool "Framebuffer Console support"
-+ depends on FB
-+ select CRC32
-+ help
-+ Low-level framebuffer-based console driver.
-+config LOGO
-+ bool "Bootup logo"
-+ depends on FB || SGI_NEWPORT_CONSOLE
-+ help
-+ Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+ bool "Standard 224-color Linux logo"
-+ depends on LOGO
-+ default y
-+config FONTS
-+ bool "Select compiled-in fonts"
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ help
-+ Say Y here if you would like to use fonts other than the default
-+ your frame buffer console usually use.
-+
-+ Note that the answer to this question won't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about foreign fonts.
-+
-+ If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+ bool "VGA 8x8 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the text console 80x50 (and higher) modes).
-+
-+ Note that this is a poor quality font. The VGA 8x16 font is quite a
-+ lot more readable.
-+
-+ Given the resolution provided by the frame buffer device, answer N
-+ here is safe.
-+
-+config FONT_8x16
-+ bool "VGA 8x16 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the VGA text console 80x25 mode.
-+
-+ If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+ bool "FOX_VHDL Framebuffer"
-+ depends on FOXBONE
-+ depends on FB
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select VT_CONSOLE
-+ select DUMMY_CONSOLE
-+ select FRAMEBUFFER_CONSOLE
-+ select FONTS
-+ select LOGO
-+ select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+ bool "nano-X keyboard support"
-+ default n
-+ depends on FOX_VHDL_FB
-+ help
-+ Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+ #source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB
-+# source "drivers/video/logo/Kconfig"
-+#endif
-+
-+endmenu
-+
-+
-+config FOXBONE_IO
-+ bool "FOXBONE I/O pins"
-+ depends on FOXBONE
-+ help
-+ Include this to get access to the I/O pins of the foxbone
-+
-+config FOXBONE_TIMEBASE
-+ bool "FOXBONE Timebase"
-+ depends on FOXBONE
-+ help
-+ Include this to get access to the timebase part of the fpga
-+
-+config FOXBONE_MMC
-+ bool "FOXBONE MMC/SD module"
-+ depends on FOXBONE
-+ help
-+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-+
-+config FOXBONE_PWM
-+ bool "FOXBONE PWM module"
-+ depends on FOXBONE
-+ help
-+ Include this to enable PWM support into the kernel
-+
-+config FOXBONE_EVENT
-+ bool "FOXBONE EVENT counter module"
-+ depends on FOXBONE
-+ help
-+ Include this to enable foxbone event counter support
-+
-+config FOXBONE_LOOPBACK
-+ bool "FOXBONE Loopback module"
-+ depends on FOXBONE
-+ help
-+ Include this to be able to load the loopback module, that you can base your own driver on
-+
-+config FOXBONE_MULTIPLY
-+ bool "FOXBONE Multiplier example"
-+ depends on FOXBONE
-+ help
-+ Include this to use the 64 bit multiplier
-+
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+ bool "FOXBONE example interrupt handlers"
-+ depends on FOXBONE
-+
-+config FOXBONE_INT14
-+ bool "Int 14 - bit 0 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-+
-+config FOXBONE_INT31
-+ bool "Int 31 - bit 1 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-+
-+endmenu
-+
-+
-+config ETRAX_CMDLINE
-+ string "Kernel command line"
-+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+ help
-+ use if no framebuffer is enabled console=ttyS0
-+ use if framebuffer is enabled console=tty0
-+
-+endmenu
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1 @@
-+obj-$(CONFIG_NANOXKBD) += nanoxkbd.o
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c
---- linux-2.6.19.2.orig/drivers/fox-vhdl/keyboard/nanoxkbd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/keyboard/nanoxkbd.c 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,173 @@
-+/*
-+ nanoxkbd.c
-+ Linux Kernel Driver for Nanox Keyboard driver for FOX VHDL Board framebuffer
-+ (based on FoxBone protocol interface specifications rel 0.7)
-+ For more info see: http://www.acmesystems.it/?id=120
-+ Author: John Crispin
-+ Copyright (C) 2006 Phrozen (http://www.phrozen.biz)
-+
-+ This is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This example is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ To have a copy of the GNU General Public License write to the Free Software
-+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+*/
-+
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/version.h>
-+#include <linux/init.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/genhd.h>
-+
-+#define DEV_NAME "keyboard"
-+#define DEV_MAJOR 195
-+
-+
-+unsigned char nanoxkbd_is_open = 0;
-+
-+#define MAX_KEYS 128
-+unsigned int keys[MAX_KEYS];
-+unsigned char keys_count = 0;
-+unsigned char keys_pos = 0;
-+
-+#define IOCTL_NANOXKBD_GET 0x7878
-+
-+unsigned char nanoxkbd_add(unsigned int keycode){
-+ if(nanoxkbd_is_open){
-+ if(keys_count < MAX_KEYS){
-+ keys[(keys_pos + keys_count) % MAX_KEYS] = keycode;
-+ keys_count++;
-+ printk("got key %d, %d, %d\n", keycode, keys_pos, keys_count);
-+ };
-+ return 1;
-+ };
-+ return 0;
-+};
-+
-+// the app has send us some control data
-+static int module_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg){
-+ //copy_to_user((char*)arg, (char*)&audio_data, sizeof(AUDIO_DATA));
-+ //copy_from_user((char*)&mp3_beep, (char*)arg, sizeof(MP3_BEEP));
-+ int retval = 0;
-+ switch (cmd) {
-+ case IOCTL_NANOXKBD_GET:
-+ if(keys_count > 0){
-+ keys_count--;
-+ copy_to_user((char*)arg, (char*)&keys[keys_pos], sizeof(unsigned int));
-+ keys_pos++;
-+ if(keys_pos >= MAX_KEYS){
-+ keys_pos = 0;
-+ };
-+ retval = 1;
-+ };
-+ break;
-+
-+ default:
-+ printk("nanoxkbd: unknown ioctl\n");
-+ break;
-+ }
-+
-+ return retval;
-+};
-+
-+
-+
-+static int module_open(struct inode *inode, struct file *file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // we only supprt minor 0 at the moment
-+ if(dev_minor != 0){
-+ printk("nanoxkbd: trying to access unknown minor device -> %d\n", dev_minor);
-+ return -ENODEV;
-+ }
-+
-+ // check if another app is currently using the device
-+ if(nanoxkbd_is_open) {
-+ printk("nanoxkbd: Device with minor ID %d already in use\n", dev_minor);
-+ return -EBUSY;
-+ }
-+ nanoxkbd_is_open = 1;
-+
-+ // more flaming
-+ printk("nanoxkbd: Minor %d has been opened\n", dev_minor);
-+ return 0;
-+};
-+
-+
-+// gets called when an app closes the device
-+static int module_close(struct inode * inode, struct file * file){
-+ // Which minor device is the user trying to access ?
-+ unsigned int dev_minor = MINOR(inode->i_rdev);
-+
-+ // remember that the device has been closed
-+ nanoxkbd_is_open = 0;
-+
-+
-+ // more flaming
-+ printk("nanoxkbd: Minor %d has been closed\n", dev_minor);
-+
-+ return 0;
-+};
-+
-+// so the kernel knows which functions to access for a given operation
-+struct file_operations nanoxkbd_module_fops = {
-+ ioctl: module_ioctl,
-+ open: module_open,
-+ release: module_close
-+};
-+
-+
-+// module gets loaded into kernel / char dev is registered
-+static int __init mod_init(void){
-+ // flame the kprintk
-+ printk("nanoxkbd: FOX-VHDL FPGA io module\n");
-+ //printk("nanoxkbd: Made by K. John '2B|!2B' Crispin (john@phrozen.org)\n");
-+ //printk("nanoxkbd: Starting ...\n");
-+
-+ // register the character device
-+ if(register_chrdev(DEV_MAJOR, DEV_NAME, &nanoxkbd_module_fops)) {
-+ printk( "nanoxkbd: Error whilst opening %s (%d)\n", DEV_NAME, DEV_MAJOR);
-+ return( -ENODEV );
-+ };
-+
-+
-+ // remember that the driver has been opened
-+ nanoxkbd_is_open = 0;
-+ printk("nanoxkbd: Device %s registered for major ID %d\n", DEV_NAME, DEV_MAJOR);
-+ return 0;
-+}
-+
-+
-+// we are done so shut everything down
-+static void __exit mod_exit(void){
-+ printk( "nanoxkbd: Cleanup\n" );
-+ // tell the kernel that the device is not needed anymore
-+ unregister_chrdev(DEV_MAJOR, DEV_NAME);
-+
-+}
-+
-+module_init (mod_init);
-+module_exit (mod_exit);
-+
-+
-+
-+
-+
-+
-diff -urN linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile linux-2.6.19.2/drivers/fox-vhdl/Makefile
---- linux-2.6.19.2.orig/drivers/fox-vhdl/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/drivers/fox-vhdl/Makefile 2007-06-17 02:46:15.000000000 +0200
-@@ -0,0 +1,13 @@
-+#
-+# Makefile for the i2c core.
-+#
-+obj-$(CONFIG_FOXBONE) += foxbone/
-+obj-$(CONFIG_FOX_VHDL_FB) += fox_vhdl_fb/
-+obj-$(CONFIG_FOX_FPGA) += fox_fpga_flash/
-+obj-$(CONFIG_FOXBONE_PWM) += fox_pwm/
-+obj-$(CONFIG_FOXBONE_IO) += fox_io/
-+obj-$(CONFIG_FOXBONE_TIMEBASE) += fox_timebase/
-+obj-$(CONFIG_FOXBONE_LOOPBACK) += fox_loopback/
-+obj-$(CONFIG_FOXBONE_EVENT) += fox_event/
-+obj-$(CONFIG_FOXBONE_MULTIPLY) += fox_multiply/
-+obj-$(CONFIG_NANOXKBD) += keyboard/
---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
-@@ -1,244 +1,274 @@
--#
--# For a description of the syntax of this configuration file,
--# see the Configure script.
--#
-+menu "Acmesystems FPGA"
-
--mainmenu "Linux/CRIS Kernel Configuration"
--
--config MMU
-- bool
-- default y
--
--config RWSEM_GENERIC_SPINLOCK
-- bool
-- default y
--
--config RWSEM_XCHGADD_ALGORITHM
-- bool
--
--config GENERIC_IOMAP
-- bool
-- default y
--
--config GENERIC_FIND_NEXT_BIT
-- bool
-- default y
--
--config GENERIC_HWEIGHT
-- bool
-+config FOX_VHDL
-+ bool "Support for FOX-VHDL Board"
-+ default n
-+
-+config FOX_FPGA
-+ bool "FPGA flash module"
-+ depends on FOX_VHDL
-+ help
-+ Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+ bool "Basic FOXBONE support"
-+ depends on FOX_VHDL
-+ help
-+ Include this to get basic FOXBONE support
-+
-+config VT
-+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+ select INPUT
-+ default y if !VIOCONS
-+ ---help---
-+ If you say Y here, you will get support for terminal devices with
-+ display and keyboard devices. These are called "virtual" because you
-+ can run several virtual terminals (also called virtual consoles) on
-+ one physical terminal. This is rather useful, for example one
-+ virtual terminal can collect system messages and warnings, another
-+ one can be used for a text-mode user session, and a third could run
-+ an X session, all in parallel. Switching between virtual terminals
-+ is done with certain key combinations, usually Alt-<function key>.
-+
-+ The setterm command ("man setterm") can be used to change the
-+ properties (such as colors or beeping) of a virtual terminal. The
-+ man page console_codes(4) ("man console_codes") contains the special
-+ character sequences that can be used to change those properties
-+ directly. The fonts used on virtual terminals can be changed with
-+ the setfont ("man setfont") command and the key bindings are defined
-+ with the loadkeys ("man loadkeys") command.
-+
-+ You need at least one virtual terminal device in order to make use
-+ of your keyboard and monitor. Therefore, only people configuring an
-+ embedded system would want to say N here in order to save some
-+ memory; the only way to log into such a system is then via a serial
-+ or network connection.
-+
-+ If unsure, say Y, or else you won't be able to do much with your new
-+ shiny Linux system :-)
-+
-+
-+menu "Framebuffer"
-+depends on VT
-+
-+config FB
-+ bool "Support for frame buffer devices"
-+ depends on VT
-+ ---help---
-+ The frame buffer device provides an abstraction for the graphics
-+ hardware. It represents the frame buffer of some video hardware and
-+ allows application software to access the graphics hardware through
-+ a well-defined interface, so the software doesn't need to know
-+ anything about the low-level (hardware register) stuff.
-+
-+ Frame buffer devices work identically across the different
-+ architectures supported by Linux and make the implementation of
-+ application programs easier and more portable; at this point, an X
-+ server exists which uses the frame buffer device exclusively.
-+ On several non-X86 architectures, the frame buffer device is the
-+ only way to use the graphics hardware.
-+
-+ The device is accessed through special device nodes, usually located
-+ in the /dev directory, i.e. /dev/fb*.
-+
-+ You need an utility program called fbset to make full use of frame
-+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+ and the Framebuffer-HOWTO at
-+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+ information.
-+
-+ Say Y here and to the driver for your graphics board below if you
-+ are compiling a kernel for a non-x86 architecture.
-+
-+ If you are compiling for the x86 architecture, you can say Y if you
-+ want to play with it, but it is not essential. Please note that
-+ running graphical applications that directly touch the hardware
-+ (e.g. an accelerated X server) and that are not frame buffer
-+ device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_fillrect function for generic software rectangle
-+ filling. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_copyarea function for generic software area copying.
-+ This is used by drivers that don't provide their own (accelerated)
-+ version.
-+
-+config FB_CFB_IMAGEBLIT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_imageblit function for generic software image
-+ blitting. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+config DUMMY_CONSOLE
-+ bool "Dummy Console"
-+ depends on FB
-+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
-+ default n
-+
-+config FRAMEBUFFER_CONSOLE
-+ bool "Framebuffer Console support"
-+ depends on FB
-+ select CRC32
-+ help
-+ Low-level framebuffer-based console driver.
-+config LOGO
-+ bool "Bootup logo"
-+ depends on FB || SGI_NEWPORT_CONSOLE
-+ help
-+ Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+ bool "Standard 224-color Linux logo"
-+ depends on LOGO
- default y
--
--config GENERIC_CALIBRATE_DELAY
-- bool
-- default y
--
--config IRQ_PER_CPU
-- bool
-- default y
--
--config CRIS
-- bool
-- default y
--
--source "init/Kconfig"
--
--menu "General setup"
--
--source "fs/Kconfig.binfmt"
--
--config GENERIC_HARDIRQS
-- bool
-- default y
--
--config SMP
-- bool "SMP"
-- help
-- SMP support. Always Say N.
--
--config NR_CPUS
-- int
-- depends on SMP
-- default 2
--
--config SCHED_MC
-- bool "Multi-core scheduler support"
-- depends on SMP
-- default y
-- help
-- Multi-core scheduler support improves the CPU scheduler's decision
-- making when dealing with multi-core CPU chips at a cost of slightly
-- increased overhead in some places. If unsure say N here.
--
--config ETRAX_CMDLINE
-- string "Kernel command line"
-- default "root=/dev/mtdblock3"
-- help
-- Pass additional commands to the kernel.
--
--config ETRAX_WATCHDOG
-- bool "Enable ETRAX watchdog"
-- help
-- Enable the built-in watchdog timer support on ETRAX based embedded
-- network computers.
--
--config ETRAX_WATCHDOG_NICE_DOGGY
-- bool "Disable watchdog during Oops printouts"
-- depends on ETRAX_WATCHDOG
-- help
-- By enabling this you make sure that the watchdog does not bite while
-- printing oopses. Recommended for development systems but not for
-- production releases.
--
--config ETRAX_FAST_TIMER
-- bool "Enable ETRAX fast timer API"
-- help
-- This options enables the API to a fast timer implementation using
-- timer1 to get sub jiffie resolution timers (primarily one-shot
-- timers).
-- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
--
--config OOM_REBOOT
-- bool "Enable reboot at out of memory"
--
--source "kernel/Kconfig.preempt"
--source "kernel/Kconfig.sched"
--
--source mm/Kconfig
-+config FONTS
-+ bool "Select compiled-in fonts"
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ help
-+ Say Y here if you would like to use fonts other than the default
-+ your frame buffer console usually use.
-+
-+ Note that the answer to this question won't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about foreign fonts.
-+
-+ If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+ bool "VGA 8x8 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the text console 80x50 (and higher) modes).
-+
-+ Note that this is a poor quality font. The VGA 8x16 font is quite a
-+ lot more readable.
-+
-+ Given the resolution provided by the frame buffer device, answer N
-+ here is safe.
-+
-+config FONT_8x16
-+ bool "VGA 8x16 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the VGA text console 80x25 mode.
-+
-+ If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+ bool "FOX_VHDL Framebuffer"
-+ depends on FOXBONE
-+ depends on FB
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select VT_CONSOLE
-+ select DUMMY_CONSOLE
-+ select FRAMEBUFFER_CONSOLE
-+ select FONTS
-+ select LOGO
-+ select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+ bool "nano-X keyboard support"
-+ default n
-+ depends on FOX_VHDL_FB
-+ help
-+ Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+ #source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB
-+# source "drivers/video/logo/Kconfig"
-+#endif
-
- endmenu
-
--menu "Hardware setup"
--
--choice
-- prompt "Processor type"
-- default ETRAX100LX
-
--config ETRAX100LX
-- bool "ETRAX-100LX-v1"
-+config FOXBONE_IO
-+ bool "FOXBONE I/O pins"
-+ depends on FOXBONE
- help
-- Support version 1 of the ETRAX 100LX.
-+ Include this to get access to the I/O pins of the foxbone
-
--config ETRAX100LX_V2
-- bool "ETRAX-100LX-v2"
-+config FOXBONE_TIMEBASE
-+ bool "FOXBONE Timebase"
-+ depends on FOXBONE
- help
-- Support version 2 of the ETRAX 100LX.
-+ Include this to get access to the timebase part of the fpga
-
--config SVINTO_SIM
-- bool "ETRAX-100LX-for-xsim-simulator"
-+config FOXBONE_MMC
-+ bool "FOXBONE MMC/SD module"
-+ depends on FOXBONE
- help
-- Support the xsim ETRAX Simulator.
-+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-
--config ETRAXFS
-- bool "ETRAX-FS-V32"
-+config FOXBONE_PWM
-+ bool "FOXBONE PWM module"
-+ depends on FOXBONE
- help
-- Support CRIS V32.
-+ Include this to enable PWM support into the kernel
-
--config ETRAXFS_SIM
-- bool "ETRAX-FS-V32-Simulator"
-+config FOXBONE_EVENT
-+ bool "FOXBONE EVENT counter module"
-+ depends on FOXBONE
- help
-- Support CRIS V32 VCS simualtor.
-+ Include this to enable foxbone event counter support
-
--endchoice
--
--config ETRAX_ARCH_V10
-- bool
-- default y if ETRAX100LX || ETRAX100LX_V2
-- default n if !(ETRAX100LX || ETRAX100LX_V2)
--
--config ETRAX_ARCH_V32
-- bool
-- default y if ETRAXFS || ETRAXFS_SIM
-- default n if !(ETRAXFS || ETRAXFS_SIM)
--
--config ETRAX_DRAM_SIZE
-- int "DRAM size (dec, in MB)"
-- default "8"
-+config FOXBONE_LOOPBACK
-+ bool "FOXBONE Loopback module"
-+ depends on FOXBONE
- help
-- Size of DRAM (decimal in MB) typically 2, 8 or 16.
-+ Include this to be able to load the loopback module, that you can base your own driver on
-
--config ETRAX_FLASH_BUSWIDTH
-- int "Buswidth of NOR flash in bytes"
-- default "2"
-+config FOXBONE_MULTIPLY
-+ bool "FOXBONE Multiplier example"
-+ depends on FOXBONE
- help
-- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
-+ Include this to use the 64 bit multiplier
-
--config ETRAX_NANDFLASH_BUSWIDTH
-- int "Buswidth of NAND flash in bytes"
-- default "1"
-- help
-- Width in bytes of the NAND flash (1 or 2).
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+ bool "FOXBONE example interrupt handlers"
-+ depends on FOXBONE
-+
-+config FOXBONE_INT14
-+ bool "Int 14 - bit 0 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-
--config ETRAX_FLASH1_SIZE
-- int "FLASH1 size (dec, in MB. 0 = Unknown)"
-- default "0"
-+config FOXBONE_INT31
-+ bool "Int 31 - bit 1 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/Kconfig
-+endmenu
-
--endmenu
--
--source "net/Kconfig"
--
--# bring in ETRAX built-in drivers
--menu "Drivers for built-in interfaces"
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/drivers/Kconfig
-
-+config ETRAX_CMDLINE
-+ string "Kernel command line"
-+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+ help
-+ use if no framebuffer is enabled console=ttyS0
-+ use if framebuffer is enabled console=tty0
-+
- endmenu
--
--source "drivers/base/Kconfig"
--
--# standard linux drivers
--source "drivers/mtd/Kconfig"
--
--source "drivers/parport/Kconfig"
--
--source "drivers/pnp/Kconfig"
--
--source "drivers/block/Kconfig"
--
--source "drivers/md/Kconfig"
--
--source "drivers/ide/Kconfig"
--
--source "drivers/scsi/Kconfig"
--
--source "drivers/ieee1394/Kconfig"
--
--source "drivers/message/i2o/Kconfig"
--
--source "drivers/net/Kconfig"
--
--source "drivers/isdn/Kconfig"
--
--source "drivers/telephony/Kconfig"
--
--source "drivers/cdrom/Kconfig"
--
--#
--# input before char - char/joystick depends on it. As does USB.
--#
--source "drivers/input/Kconfig"
--
--source "drivers/char/Kconfig"
--
--#source drivers/misc/Config.in
--source "drivers/media/Kconfig"
--
--source "fs/Kconfig"
--
--source "sound/Kconfig"
--
--source "drivers/pcmcia/Kconfig"
--
--source "drivers/pci/Kconfig"
--
--source "drivers/usb/Kconfig"
--
--source "arch/cris/Kconfig.debug"
--
--source "security/Kconfig"
--
--source "crypto/Kconfig"
--
--source "lib/Kconfig"
---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/drivers/fox-vhdl/Kconfig 2007-06-17 02:46:15.000000000 +0200
-@@ -1,244 +1,274 @@
--#
--# For a description of the syntax of this configuration file,
--# see the Configure script.
--#
-+menu "Acmesystems FPGA"
-
--mainmenu "Linux/CRIS Kernel Configuration"
--
--config MMU
-- bool
-- default y
--
--config RWSEM_GENERIC_SPINLOCK
-- bool
-- default y
--
--config RWSEM_XCHGADD_ALGORITHM
-- bool
--
--config GENERIC_IOMAP
-- bool
-- default y
--
--config GENERIC_FIND_NEXT_BIT
-- bool
-- default y
--
--config GENERIC_HWEIGHT
-- bool
-+config FOX_VHDL
-+ bool "Support for FOX-VHDL Board"
-+ default n
-+
-+config FOX_FPGA
-+ bool "FPGA flash module"
-+ depends on FOX_VHDL
-+ help
-+ Adds the module needed to flash the fpga from the FOX
-+
-+config FOXBONE
-+ bool "Basic FOXBONE support"
-+ depends on FOX_VHDL
-+ help
-+ Include this to get basic FOXBONE support
-+
-+config VT
-+ bool "Virtual terminal (needed for framebuffer)" if EMBEDDED
-+ select INPUT
-+ default y if !VIOCONS
-+ ---help---
-+ If you say Y here, you will get support for terminal devices with
-+ display and keyboard devices. These are called "virtual" because you
-+ can run several virtual terminals (also called virtual consoles) on
-+ one physical terminal. This is rather useful, for example one
-+ virtual terminal can collect system messages and warnings, another
-+ one can be used for a text-mode user session, and a third could run
-+ an X session, all in parallel. Switching between virtual terminals
-+ is done with certain key combinations, usually Alt-<function key>.
-+
-+ The setterm command ("man setterm") can be used to change the
-+ properties (such as colors or beeping) of a virtual terminal. The
-+ man page console_codes(4) ("man console_codes") contains the special
-+ character sequences that can be used to change those properties
-+ directly. The fonts used on virtual terminals can be changed with
-+ the setfont ("man setfont") command and the key bindings are defined
-+ with the loadkeys ("man loadkeys") command.
-+
-+ You need at least one virtual terminal device in order to make use
-+ of your keyboard and monitor. Therefore, only people configuring an
-+ embedded system would want to say N here in order to save some
-+ memory; the only way to log into such a system is then via a serial
-+ or network connection.
-+
-+ If unsure, say Y, or else you won't be able to do much with your new
-+ shiny Linux system :-)
-+
-+
-+menu "Framebuffer"
-+depends on VT
-+
-+config FB
-+ bool "Support for frame buffer devices"
-+ depends on VT
-+ ---help---
-+ The frame buffer device provides an abstraction for the graphics
-+ hardware. It represents the frame buffer of some video hardware and
-+ allows application software to access the graphics hardware through
-+ a well-defined interface, so the software doesn't need to know
-+ anything about the low-level (hardware register) stuff.
-+
-+ Frame buffer devices work identically across the different
-+ architectures supported by Linux and make the implementation of
-+ application programs easier and more portable; at this point, an X
-+ server exists which uses the frame buffer device exclusively.
-+ On several non-X86 architectures, the frame buffer device is the
-+ only way to use the graphics hardware.
-+
-+ The device is accessed through special device nodes, usually located
-+ in the /dev directory, i.e. /dev/fb*.
-+
-+ You need an utility program called fbset to make full use of frame
-+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+ and the Framebuffer-HOWTO at
-+ <http://www.tahallah.demon.co.uk/programming/prog.html> for more
-+ information.
-+
-+ Say Y here and to the driver for your graphics board below if you
-+ are compiling a kernel for a non-x86 architecture.
-+
-+ If you are compiling for the x86 architecture, you can say Y if you
-+ want to play with it, but it is not essential. Please note that
-+ running graphical applications that directly touch the hardware
-+ (e.g. an accelerated X server) and that are not frame buffer
-+ device-aware may cause unexpected results. If unsure, say N.
-+
-+config FB_CFB_FILLRECT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_fillrect function for generic software rectangle
-+ filling. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+
-+config FB_CFB_COPYAREA
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_copyarea function for generic software area copying.
-+ This is used by drivers that don't provide their own (accelerated)
-+ version.
-+
-+config FB_CFB_IMAGEBLIT
-+ tristate
-+ depends on FB
-+ default n
-+ ---help---
-+ Include the cfb_imageblit function for generic software image
-+ blitting. This is used by drivers that don't provide their own
-+ (accelerated) version.
-+config DUMMY_CONSOLE
-+ bool "Dummy Console"
-+ depends on FB
-+ #PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
-+ default n
-+
-+config FRAMEBUFFER_CONSOLE
-+ bool "Framebuffer Console support"
-+ depends on FB
-+ select CRC32
-+ help
-+ Low-level framebuffer-based console driver.
-+config LOGO
-+ bool "Bootup logo"
-+ depends on FB || SGI_NEWPORT_CONSOLE
-+ help
-+ Enable and select frame buffer bootup logos.
-+
-+config LOGO_LINUX_CLUT224
-+ bool "Standard 224-color Linux logo"
-+ depends on LOGO
- default y
--
--config GENERIC_CALIBRATE_DELAY
-- bool
-- default y
--
--config IRQ_PER_CPU
-- bool
-- default y
--
--config CRIS
-- bool
-- default y
--
--source "init/Kconfig"
--
--menu "General setup"
--
--source "fs/Kconfig.binfmt"
--
--config GENERIC_HARDIRQS
-- bool
-- default y
--
--config SMP
-- bool "SMP"
-- help
-- SMP support. Always Say N.
--
--config NR_CPUS
-- int
-- depends on SMP
-- default 2
--
--config SCHED_MC
-- bool "Multi-core scheduler support"
-- depends on SMP
-- default y
-- help
-- Multi-core scheduler support improves the CPU scheduler's decision
-- making when dealing with multi-core CPU chips at a cost of slightly
-- increased overhead in some places. If unsure say N here.
--
--config ETRAX_CMDLINE
-- string "Kernel command line"
-- default "root=/dev/mtdblock3"
-- help
-- Pass additional commands to the kernel.
--
--config ETRAX_WATCHDOG
-- bool "Enable ETRAX watchdog"
-- help
-- Enable the built-in watchdog timer support on ETRAX based embedded
-- network computers.
--
--config ETRAX_WATCHDOG_NICE_DOGGY
-- bool "Disable watchdog during Oops printouts"
-- depends on ETRAX_WATCHDOG
-- help
-- By enabling this you make sure that the watchdog does not bite while
-- printing oopses. Recommended for development systems but not for
-- production releases.
--
--config ETRAX_FAST_TIMER
-- bool "Enable ETRAX fast timer API"
-- help
-- This options enables the API to a fast timer implementation using
-- timer1 to get sub jiffie resolution timers (primarily one-shot
-- timers).
-- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
--
--config OOM_REBOOT
-- bool "Enable reboot at out of memory"
--
--source "kernel/Kconfig.preempt"
--source "kernel/Kconfig.sched"
--
--source mm/Kconfig
-+config FONTS
-+ bool "Select compiled-in fonts"
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ help
-+ Say Y here if you would like to use fonts other than the default
-+ your frame buffer console usually use.
-+
-+ Note that the answer to this question won't directly affect the
-+ kernel: saying N will just cause the configurator to skip all
-+ the questions about foreign fonts.
-+
-+ If unsure, say N (the default choices are safe).
-+
-+config FONT_8x8
-+ bool "VGA 8x8 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the text console 80x50 (and higher) modes).
-+
-+ Note that this is a poor quality font. The VGA 8x16 font is quite a
-+ lot more readable.
-+
-+ Given the resolution provided by the frame buffer device, answer N
-+ here is safe.
-+
-+config FONT_8x16
-+ bool "VGA 8x16 font" if FONTS
-+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
-+ default y if !SPARC && !FONTS
-+ help
-+ This is the "high resolution" font for the VGA frame buffer (the one
-+ provided by the VGA text console 80x25 mode.
-+
-+ If unsure, say Y.
-+
-+
-+config FOX_VHDL_FB
-+ bool "FOX_VHDL Framebuffer"
-+ depends on FOXBONE
-+ depends on FB
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ select VT_CONSOLE
-+ select DUMMY_CONSOLE
-+ select FRAMEBUFFER_CONSOLE
-+ select FONTS
-+ select LOGO
-+ select LOGO_LINUX_CLUT224
-+
-+config NANOXKBD
-+ bool "nano-X keyboard support"
-+ default n
-+ depends on FOX_VHDL_FB
-+ help
-+ Enable the keyboard driver patches for nano-X
-+
-+
-+
-+#if FOX_VHDL_FB
-+ #source "drivers/video/console/Kconfig"
-+#endif
-+
-+#if FOX_VHDL_FB
-+# source "drivers/video/logo/Kconfig"
-+#endif
-
- endmenu
-
--menu "Hardware setup"
--
--choice
-- prompt "Processor type"
-- default ETRAX100LX
-
--config ETRAX100LX
-- bool "ETRAX-100LX-v1"
-+config FOXBONE_IO
-+ bool "FOXBONE I/O pins"
-+ depends on FOXBONE
- help
-- Support version 1 of the ETRAX 100LX.
-+ Include this to get access to the I/O pins of the foxbone
-
--config ETRAX100LX_V2
-- bool "ETRAX-100LX-v2"
-+config FOXBONE_TIMEBASE
-+ bool "FOXBONE Timebase"
-+ depends on FOXBONE
- help
-- Support version 2 of the ETRAX 100LX.
-+ Include this to get access to the timebase part of the fpga
-
--config SVINTO_SIM
-- bool "ETRAX-100LX-for-xsim-simulator"
-+config FOXBONE_MMC
-+ bool "FOXBONE MMC/SD module"
-+ depends on FOXBONE
- help
-- Support the xsim ETRAX Simulator.
-+ Include this to be able to access a mmc/sd card connected to J3 of the fox-vhdl board
-
--config ETRAXFS
-- bool "ETRAX-FS-V32"
-+config FOXBONE_PWM
-+ bool "FOXBONE PWM module"
-+ depends on FOXBONE
- help
-- Support CRIS V32.
-+ Include this to enable PWM support into the kernel
-
--config ETRAXFS_SIM
-- bool "ETRAX-FS-V32-Simulator"
-+config FOXBONE_EVENT
-+ bool "FOXBONE EVENT counter module"
-+ depends on FOXBONE
- help
-- Support CRIS V32 VCS simualtor.
-+ Include this to enable foxbone event counter support
-
--endchoice
--
--config ETRAX_ARCH_V10
-- bool
-- default y if ETRAX100LX || ETRAX100LX_V2
-- default n if !(ETRAX100LX || ETRAX100LX_V2)
--
--config ETRAX_ARCH_V32
-- bool
-- default y if ETRAXFS || ETRAXFS_SIM
-- default n if !(ETRAXFS || ETRAXFS_SIM)
--
--config ETRAX_DRAM_SIZE
-- int "DRAM size (dec, in MB)"
-- default "8"
-+config FOXBONE_LOOPBACK
-+ bool "FOXBONE Loopback module"
-+ depends on FOXBONE
- help
-- Size of DRAM (decimal in MB) typically 2, 8 or 16.
-+ Include this to be able to load the loopback module, that you can base your own driver on
-
--config ETRAX_FLASH_BUSWIDTH
-- int "Buswidth of NOR flash in bytes"
-- default "2"
-+config FOXBONE_MULTIPLY
-+ bool "FOXBONE Multiplier example"
-+ depends on FOXBONE
- help
-- Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
-+ Include this to use the 64 bit multiplier
-
--config ETRAX_NANDFLASH_BUSWIDTH
-- int "Buswidth of NAND flash in bytes"
-- default "1"
-- help
-- Width in bytes of the NAND flash (1 or 2).
-+menu "FOXBONE interrupt handlers"
-+config FOXBONE_SAMPLE_ISR
-+ bool "FOXBONE example interrupt handlers"
-+ depends on FOXBONE
-+
-+config FOXBONE_INT14
-+ bool "Int 14 - bit 0 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-
--config ETRAX_FLASH1_SIZE
-- int "FLASH1 size (dec, in MB. 0 = Unknown)"
-- default "0"
-+config FOXBONE_INT31
-+ bool "Int 31 - bit 1 of reg 0x13 set"
-+ depends on FOXBONE_SAMPLE_ISR
-
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/Kconfig
-+endmenu
-
--endmenu
--
--source "net/Kconfig"
--
--# bring in ETRAX built-in drivers
--menu "Drivers for built-in interfaces"
--# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
--source arch/cris/arch/drivers/Kconfig
-
-+config ETRAX_CMDLINE
-+ string "Kernel command line"
-+ default "root=/dev/mtdblock3 init=/linuxrc console=ttyS0"
-+ help
-+ use if no framebuffer is enabled console=ttyS0
-+ use if framebuffer is enabled console=tty0
-+
- endmenu
--
--source "drivers/base/Kconfig"
--
--# standard linux drivers
--source "drivers/mtd/Kconfig"
--
--source "drivers/parport/Kconfig"
--
--source "drivers/pnp/Kconfig"
--
--source "drivers/block/Kconfig"
--
--source "drivers/md/Kconfig"
--
--source "drivers/ide/Kconfig"
--
--source "drivers/scsi/Kconfig"
--
--source "drivers/ieee1394/Kconfig"
--
--source "drivers/message/i2o/Kconfig"
--
--source "drivers/net/Kconfig"
--
--source "drivers/isdn/Kconfig"
--
--source "drivers/telephony/Kconfig"
--
--source "drivers/cdrom/Kconfig"
--
--#
--# input before char - char/joystick depends on it. As does USB.
--#
--source "drivers/input/Kconfig"
--
--source "drivers/char/Kconfig"
--
--#source drivers/misc/Config.in
--source "drivers/media/Kconfig"
--
--source "fs/Kconfig"
--
--source "sound/Kconfig"
--
--source "drivers/pcmcia/Kconfig"
--
--source "drivers/pci/Kconfig"
--
--source "drivers/usb/Kconfig"
--
--source "arch/cris/Kconfig.debug"
--
--source "security/Kconfig"
--
--source "crypto/Kconfig"
--
--source "lib/Kconfig"
---- linux-2.6.19.2.orig/arch/cris/Kconfig 2007-06-16 23:58:14.000000000 +0200
-+++ linux-2.6.19.2/arch/cris/Kconfig 2007-06-17 02:52:11.000000000 +0200
-@@ -242,3 +242,6 @@
- source "crypto/Kconfig"
-
- source "lib/Kconfig"
-+menu "Acmesystems"
-+source "drivers/fox-vhdl/Kconfig"
-+endmenu
-79a80
-> obj-$(CONFIG_FOX_VHDL) += fox-vhdl/
-diff -urN linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h linux-2.6.19.2/include/linux/foxbone_syscalls.h
---- linux-2.6.19.2.orig/include/linux/foxbone_syscalls.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2/include/linux/foxbone_syscalls.h 2007-06-17 03:31:39.000000000 +0200
-@@ -0,0 +1,18 @@
-+#ifndef __LINUX_SYSCALL_FOXBONE
-+#define __LINUX_SYSCALL_FOXBONE
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <asm/unistd.h>
-+
-+extern int errno;
-+_syscall1(void, foxbonereset, unsigned short int, reg);
-+_syscall1(unsigned short int, foxboneread, unsigned short int, reg);
-+_syscall2(void, foxbonewrite, unsigned short int, reg, unsigned short int, value);
-+_syscall3(void, foxbonebulkread, unsigned short int, reg, unsigned short int *, value, unsigned int, length);
-+_syscall3(void, foxbonebulkwrite, unsigned short int, reg, unsigned short int *, value, unsigned int, length);
-+_syscall2(void, foxboneintreg, unsigned long int, interrupt, unsigned char, state);
-+_syscall1(unsigned int, foxboneintcheck, unsigned long int, interrupt);
-+_syscall2(unsigned int, foxboneintwait, unsigned long int, interrupt, unsigned char, timeout);
-+
-+#endif