diff options
4 files changed, 35 insertions, 34 deletions
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm index ac18e0b..76382e5 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -11,7 +11,17 @@ set_preinit_iface() { "ASUS (unknown, BCM4702)") ifname=eth1;; "Sitecom WL-105b") ifname=eth1;; esac + + # The interface has to be up to configure the switch ifconfig $ifname 0.0.0.0 up + [ -f /lib/modules/`uname -r`/switch-robo.ko ] && { + rmmod switch-robo + insmod switch-robo + } + [ -f /lib/modules/`uname -r`/switch-adm.ko ] && { + rmmod switch-adm + insmod switch-adm + } } init_iface() { diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm index dd8fd6e..7e030ac 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm @@ -2,13 +2,17 @@ failsafe_ip() { [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && { - ifconfig eth0 0.0.0.0 down + # The switch will connect all ports, The switch will leak + # packages from wan to lan and vice versa in failsafe mode + echo 1 > /proc/switch/eth0/reset + echo 1 > /proc/switch/eth0/enable + echo 0 > /proc/switch/eth0/enable_vlan echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports } [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up - } + } } boot_hook_add failsafe failsafe_ip diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm index 8c425a0..bc74939 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm @@ -1,37 +1,34 @@ #!/bin/sh -port_net_echo() { - [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { - if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then - netmsg $pi_broadcast "$1" - fi - } -} - -preinit_ip_deconfig() { - if [ -z "$pi_ifname" ]; then - ifconfig $ifname 0.0.0.0 down - else - grep -q "$pi_ifname" /proc/net/dev && { - ifconfig $pi_ifname 0.0.0.0 down - } - fi -} - -preinit_net_echo() { +preinit_net_echo_send() { preinit_ip [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && { + echo 1 > /proc/switch/eth0/reset + echo 1 > /proc/switch/eth0/enable + echo 1 > /proc/switch/eth0/enable_vlan # this would be easier if we blasted the message across all ports # but we don't want packets leaking across interfaces for port in $(seq 0 4); do { + echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports - port_net_echo $1 + sleep 1 + + netmsg $pi_broadcast "$1" }; done - echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports + } || netmsg $pi_broadcast "$1" +} - } || port_net_echo $1 +preinit_net_echo() { + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + { + [ "$pi_preinit_net_messages" = "y" ] || { + [ "$pi_failsafe_net_message" = "true" ] && + [ "$pi_preinit_no_failsafe_netmsg" != "y" ] + } + } && preinit_net_echo_send $1 + } } diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm deleted file mode 100644 index 2b0d2cc..0000000 --- a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -indicate_failsafe() { - preinit_net_echo() { - port_net_echo $1 - } - echo "- failsafe -" - preinit_net_echo "Entering Failsafe!\n" - indicate_failsafe_led -} |