summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/kernel-version.mk4
-rw-r--r--target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch2
-rw-r--r--target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch2
-rw-r--r--target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch4
-rw-r--r--target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch2
-rw-r--r--target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch26
-rw-r--r--target/linux/cns3xxx/patches-3.18/070-i2c_support.patch2
-rw-r--r--target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch35
-rw-r--r--target/linux/generic/patches-3.18/834-ledtrig-libata.patch10
-rw-r--r--target/linux/generic/patches-3.18/921-use_preinit_as_init.patch2
-rw-r--r--target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch2
-rw-r--r--target/linux/lantiq/patches-3.18/0101-mtd-split.patch6
-rw-r--r--target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch4
-rw-r--r--target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch2
-rw-r--r--target/linux/ramips/patches-3.18/0060-soc_type.patch2
-rw-r--r--target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch8
-rw-r--r--target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch4
-rw-r--r--target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch2
-rw-r--r--target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch2
-rw-r--r--target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch4
20 files changed, 45 insertions, 80 deletions
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 2d4782a..afc0e65 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -2,11 +2,11 @@
LINUX_RELEASE?=1
-LINUX_VERSION-3.18 = .20
+LINUX_VERSION-3.18 = .21
LINUX_VERSION-4.0 = .9
LINUX_VERSION-4.1 = .6
-LINUX_KERNEL_MD5SUM-3.18.20 = 952c9159acdf4efbc96e08a27109d994
+LINUX_KERNEL_MD5SUM-3.18.21 = e4248caaa4cef318c04657e971b37298
LINUX_KERNEL_MD5SUM-4.0.9 = 40fc5f6e2d718e539b45e6601c71985b
LINUX_KERNEL_MD5SUM-4.1.6 = 1dae0c808e34164cab3dfd57be88bd53
diff --git a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
index 95e4a6d..7795597 100644
--- a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
+++ b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch
@@ -212,7 +212,7 @@ The correct baudrate is shown in the log after the cdiv > 0xffff correction.
static void timer_set_mode(enum clock_event_mode mode,
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -371,6 +371,25 @@ config I2C_BCM2835
+@@ -372,6 +372,25 @@ config I2C_BCM2835
This support is also available as a module. If so, the module
will be called i2c-bcm2835.
diff --git a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
index acf9203..0269052 100644
--- a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
+++ b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch
@@ -147,7 +147,7 @@ Signed-off-by: Noralf Tronnes <notro@tronnes.org>
bcm_register_device(&bcm2835_thermal_device);
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -361,7 +361,7 @@ config I2C_AXXIA
+@@ -362,7 +362,7 @@ config I2C_AXXIA
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
diff --git a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
index 6878838..c1e938b 100644
--- a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
+++ b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch
@@ -9352,7 +9352,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -361,7 +361,7 @@ config I2C_AXXIA
+@@ -362,7 +362,7 @@ config I2C_AXXIA
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
@@ -9361,7 +9361,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2
help
If you say yes to this option, support will be included for the
BCM2835 I2C controller.
-@@ -373,7 +373,7 @@ config I2C_BCM2835
+@@ -374,7 +374,7 @@ config I2C_BCM2835
config I2C_BCM2708
tristate "BCM2708 BSC"
diff --git a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
index dd430f5..48cf095 100644
--- a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
+++ b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch
@@ -242,7 +242,7 @@
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
-@@ -333,6 +333,10 @@
+@@ -358,6 +358,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set arch=r4000
diff --git a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
index 260602a..4358afd 100644
--- a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
+++ b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
@@ -1,9 +1,9 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
- },
+ },
};
-
+
+static struct sprom_fixup __initdata vr3026e_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
@@ -59,21 +59,21 @@
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
- .alias = "eth0",
+ .alias = "eth0",
};
@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
- &board_P870HW51A_V2,
- &board_VR3025u,
- &board_VR3025un,
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
+ &board_VR3026e,
- &board_WAP5813n,
+ &board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
- { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
- { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
- { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
- { .compatible = "huawei,hg655b", .data = &board_HG655b, },
- { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
index 0114d7e..ff6be6a 100644
--- a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
+++ b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch
@@ -1,6 +1,6 @@
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO
+@@ -417,6 +417,18 @@ config I2C_CBUS_GPIO
This driver can also be built as a module. If so, the module
will be called i2c-cbus-gpio.
diff --git a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch b/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch
deleted file mode 100644
index a7bfef3..0000000
--- a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 19 Jul 2015 00:21:57 +0200
-Subject: [PATCH] MIPS: kernel: fix sched_getaffinity with MT FPAFF enabled
-
-p->thread.user_cpus_allowed is zero-initialized and is only filled on
-the first sched_setaffinity call.
-
-To avoid adding overhead in the task initialization codepath, simply OR
-the returned mask in sched_getaffinity with p->cpus_allowed.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/arch/mips/kernel/mips-mt-fpaff.c
-+++ b/arch/mips/kernel/mips-mt-fpaff.c
-@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
- unsigned long __user *user_mask_ptr)
- {
- unsigned int real_len;
-- cpumask_t mask;
-+ cpumask_t allowed, mask;
- int retval;
- struct task_struct *p;
-
-@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
- if (retval)
- goto out_unlock;
-
-- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
-+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
-+ cpumask_and(&mask, &allowed, cpu_active_mask);
-
- out_unlock:
- read_unlock(&tasklist_lock);
diff --git a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
index 1360ce9..4c0ffca 100644
--- a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
+++ b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch
@@ -69,7 +69,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
-@@ -4761,6 +4774,9 @@ static struct ata_queued_cmd *ata_qc_new
+@@ -4798,6 +4811,9 @@ static struct ata_queued_cmd *ata_qc_new
break;
}
}
@@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
return qc;
}
-@@ -5671,6 +5687,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -5708,6 +5724,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
@@ -89,7 +89,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ata_sff_port_init(ap);
return ap;
-@@ -5692,6 +5711,12 @@ static void ata_host_release(struct devi
+@@ -5729,6 +5748,12 @@ static void ata_host_release(struct devi
kfree(ap->pmp_link);
kfree(ap->slave_link);
@@ -102,7 +102,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
kfree(ap);
host->ports[i] = NULL;
}
-@@ -6138,7 +6163,23 @@ int ata_host_register(struct ata_host *h
+@@ -6175,7 +6200,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
@@ -138,7 +138,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
-@@ -872,6 +875,12 @@ struct ata_port {
+@@ -874,6 +877,12 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
diff --git a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
index d297e3b..57c2fe2 100644
--- a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
+++ b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch
@@ -1,6 +1,6 @@
--- a/init/main.c
+++ b/init/main.c
-@@ -962,7 +962,8 @@ static int __ref kernel_init(void *unuse
+@@ -963,7 +963,8 @@ static int __ref kernel_init(void *unuse
pr_err("Failed to execute %s (error %d). Attempting defaults...\n",
execute_command, ret);
}
diff --git a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index 819eb32..4f655db 100644
--- a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -553,6 +553,16 @@ config I2C_KEMPLD
+@@ -554,6 +554,16 @@ config I2C_KEMPLD
This driver can also be built as a module. If so, the module
will be called i2c-kempld.
diff --git a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
index 6753a21..6152e0e 100644
--- a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
+++ b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch
@@ -164,7 +164,7 @@
enum mtd_parser_type type,
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -627,7 +627,7 @@ out_register:
+@@ -628,7 +628,7 @@ out_register:
}
@@ -173,7 +173,7 @@
__mtd_add_partition(struct mtd_info *master, const char *name,
long long offset, long long length, bool dup_check)
{
-@@ -748,7 +748,7 @@ run_parsers_by_type(struct mtd_part *sla
+@@ -749,7 +749,7 @@ run_parsers_by_type(struct mtd_part *sla
return nr_parts;
}
@@ -182,7 +182,7 @@
mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
{
unsigned long mask = mtd->erasesize - 1;
-@@ -818,7 +818,6 @@ static void split_uimage(struct mtd_info
+@@ -819,7 +819,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
diff --git a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
index 5a7d416..2448d0a 100644
--- a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
+++ b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
@@ -1,6 +1,6 @@
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
-@@ -239,6 +239,11 @@
+@@ -239,6 +239,11 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
@@ -14,7 +14,7 @@
depends on RESET_CONTROLLER
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
-@@ -31,3 +31,4 @@
+@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) +=
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
diff --git a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
index 8ed0610..0cf5542 100644
--- a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -45,7 +45,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -710,6 +710,10 @@ config I2C_RK3X
+@@ -711,6 +711,10 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-3.18/0060-soc_type.patch
index 292a4ad..41cc120 100644
--- a/target/linux/ramips/patches-3.18/0060-soc_type.patch
+++ b/target/linux/ramips/patches-3.18/0060-soc_type.patch
@@ -219,7 +219,7 @@
{
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
-@@ -176,6 +176,7 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -193,6 +193,7 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
soc_info->mem_base = MT7621_DRAM_BASE;
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
index 15f5ee8..98e8ca5 100644
--- a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
+++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
@@ -5546,7 +5546,7 @@
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4454,8 +4600,14 @@ static u16 xhci_call_host_update_timeout
u16 *timeout)
{
if (state == USB3_LPM_U1)
@@ -5561,7 +5561,7 @@
return xhci_calculate_u2_timeout(xhci, udev, desc);
return USB3_LPM_DISABLED;
-@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4840,7 +4992,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
hcd->self.no_sg_constraint = 1;
/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5571,7 +5571,7 @@
if (usb_hcd_is_primary_hcd(hcd)) {
xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4903,6 +5057,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
goto error;
xhci_dbg(xhci, "Reset complete\n");
@@ -5582,7 +5582,7 @@
/* Set dma_mask and coherent_dma_mask to 64-bits,
* if xHC supports 64-bit addressing */
if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -4997,8 +5155,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
index 42c04ae..520c570 100644
--- a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
+++ b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
-@@ -675,7 +675,6 @@
+@@ -675,7 +675,6 @@ static void __init arch_mem_init(char **
crashk_res.end - crashk_res.start + 1,
BOOTMEM_DEFAULT);
#endif
@@ -8,7 +8,7 @@
sparse_init();
plat_swiotlb_setup();
paging_init();
-@@ -784,6 +783,7 @@
+@@ -784,6 +783,7 @@ void __init setup_arch(char **cmdline_p)
prefill_possible_map();
cpu_cache_init();
diff --git a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
index b34581e..9b9a72b 100644
--- a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
+++ b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
@@ -1,6 +1,6 @@
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -714,6 +714,10 @@ config I2C_RALINK
+@@ -715,6 +715,10 @@ config I2C_RALINK
tristate "Ralink I2C Controller"
select OF_I2C
diff --git a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
index 32cea7d..81702c2 100644
--- a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
+++ b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
@@ -1,6 +1,6 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -818,9 +818,6 @@ static void split_uimage(struct mtd_info
+@@ -819,9 +819,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
diff --git a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
index 6f6458f..50b88db 100644
--- a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
+++ b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
@@ -1,6 +1,6 @@
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -806,8 +806,11 @@ static void split_uimage(struct mtd_info
+@@ -807,8 +807,11 @@ static void split_uimage(struct mtd_info
{
struct {
__be32 magic;
@@ -13,7 +13,7 @@
} hdr;
size_t len;
-@@ -817,7 +820,10 @@ static void split_uimage(struct mtd_info
+@@ -818,7 +821,10 @@ static void split_uimage(struct mtd_info
if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
return;