summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--0001-ramips-add-support-for-Nexx-WT3020-devices.patch319
1 files changed, 0 insertions, 319 deletions
diff --git a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch b/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
deleted file mode 100644
index a67b275..0000000
--- a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001
-From: Roger Pueyo Centelles <roger.pueyo@guifi.net>
-Date: Sun, 19 Oct 2014 17:50:01 +0200
-Subject: [PATCH] ramips: add support for Nexx WT3020 devices
-
----
- target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
- .../linux/ramips/base-files/etc/board.d/02_network | 1 +
- target/linux/ramips/base-files/etc/diag.sh | 3 +
- target/linux/ramips/base-files/lib/ramips.sh | 3 +
- .../ramips/base-files/lib/upgrade/platform.sh | 1 +
- target/linux/ramips/dts/WT3020-4M.dts | 100 +++++++++++++++++++++
- target/linux/ramips/dts/WT3020-8M.dts | 100 +++++++++++++++++++++
- target/linux/ramips/image/Makefile | 2 +
- 8 files changed, 213 insertions(+)
- create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
- create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
-
-diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
-index 26f384d..7ca7ffb 100755
---- a/target/linux/ramips/base-files/etc/board.d/01_leds
-+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
-@@ -213,6 +213,9 @@ case $board in
- wt1520)
- set_wifi_led "rt2800pci-phy0::radio"
- ;;
-+ wt3020)
-+ ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
-+ ;;
- y1 |\
- y1s)
- ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
-diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
-index 7ecec5f..ff8fbc0 100755
---- a/target/linux/ramips/base-files/etc/board.d/02_network
-+++ b/target/linux/ramips/base-files/etc/board.d/02_network
-@@ -127,6 +127,7 @@ ramips_setup_interfaces()
- hg255d | \
- rt-n14u | \
- wrtnode | \
-+ wt3020 | \
- ur-326n4g | \
- zbt-wa05)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
-index aed7d6a..2977099 100755
---- a/target/linux/ramips/base-files/etc/diag.sh
-+++ b/target/linux/ramips/base-files/etc/diag.sh
-@@ -170,6 +170,9 @@ get_status_led() {
- nexx-wt1520)
- status_led="nexx-wt1520:white:power"
- ;;
-+ nexx-wt3020)
-+ status_led="nexx:blue:power"
-+ ;;
- mzk-w300nh2)
- status_led="mzkw300nh2:green:power"
- ;;
-diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
-index 08c5dff..88fa623 100755
---- a/target/linux/ramips/base-files/lib/ramips.sh
-+++ b/target/linux/ramips/base-files/lib/ramips.sh
-@@ -184,6 +184,9 @@ ramips_board_detect() {
- *"Nexx WT1520")
- name="wt1520"
- ;;
-+ *"Nexx WT3020")
-+ name="wt3020"
-+ ;;
- *"NW718")
- name="nw718"
- ;;
-diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
-index 61a0935..c9a418e 100755
---- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
-@@ -97,6 +97,7 @@ platform_check_image() {
- wr8305rt |\
- wrtnode |\
- wt1520 |\
-+ wt3020 |\
- x5 |\
- x8 |\
- y1 |\
-diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts
-new file mode 100644
-index 0000000..7583680
---- /dev/null
-+++ b/target/linux/ramips/dts/WT3020-4M.dts
-@@ -0,0 +1,100 @@
-+/dts-v1/;
-+
-+/include/ "mt7620n.dtsi"
-+
-+/ {
-+ compatible = "wt3020", "ralink,mt7620n-soc";
-+ model = "Nexx WT3020";
-+
-+ palmbus@10000000 {
-+ gpio2: gpio@660 {
-+ status = "okay";
-+ };
-+
-+ gpio3: gpio@688 {
-+ status = "okay";
-+ };
-+
-+ spi@b00 {
-+ status = "okay";
-+
-+ m25p80@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "w25q32";
-+ reg = <0 0>;
-+ linux,modalias = "m25p80", "w25q32";
-+ spi-max-frequency = <10000000>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x30000>;
-+ read-only;
-+ };
-+
-+ partition@30000 {
-+ label = "u-boot-env";
-+ reg = <0x30000 0x10000>;
-+ read-only;
-+ };
-+
-+ factory: partition@40000 {
-+ label = "factory";
-+ reg = <0x40000 0x10000>;
-+ read-only;
-+ };
-+
-+ partition@50000 {
-+ label = "firmware";
-+ reg = <0x50000 0x3b0000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ ehci@101c0000 {
-+ status = "okay";
-+ };
-+
-+ ohci@101c1000 {
-+ status = "okay";
-+ };
-+
-+ ethernet@10100000 {
-+ mtd-mac-address = <&factory 0x4>;
-+ ralink,port-map = "wllll";
-+ };
-+
-+ wmac@10180000 {
-+ ralink,mtd-eeprom = <&factory 0>;
-+ };
-+
-+ pinctrl {
-+ state_default: pinctrl0 {
-+ default {
-+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-+ ralink,function = "gpio";
-+ };
-+ };
-+ };
-+
-+ gpio-keys-polled {
-+ compatible = "gpio-keys-polled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <20>;
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio0 1 1>;
-+ linux,code = <0x198>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ power {
-+ label = "nexx:blue:power";
-+ gpios = <&gpio3 0 0>;
-+ };
-+ };
-+};
-diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
-new file mode 100644
-index 0000000..5fa7c92
---- /dev/null
-+++ b/target/linux/ramips/dts/WT3020-8M.dts
-@@ -0,0 +1,100 @@
-+/dts-v1/;
-+
-+/include/ "mt7620n.dtsi"
-+
-+/ {
-+ compatible = "wt3020", "ralink,mt7620n-soc";
-+ model = "Nexx WT3020";
-+
-+ palmbus@10000000 {
-+ gpio2: gpio@660 {
-+ status = "okay";
-+ };
-+
-+ gpio3: gpio@688 {
-+ status = "okay";
-+ };
-+
-+ spi@b00 {
-+ status = "okay";
-+
-+ m25p80@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "w25q64";
-+ reg = <0 0>;
-+ linux,modalias = "m25p80", "w25q64";
-+ spi-max-frequency = <10000000>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x30000>;
-+ read-only;
-+ };
-+
-+ partition@30000 {
-+ label = "u-boot-env";
-+ reg = <0x30000 0x10000>;
-+ read-only;
-+ };
-+
-+ factory: partition@40000 {
-+ label = "factory";
-+ reg = <0x40000 0x10000>;
-+ read-only;
-+ };
-+
-+ partition@50000 {
-+ label = "firmware";
-+ reg = <0x50000 0x7b0000>;
-+ };
-+ };
-+ };
-+ };
-+
-+ ehci@101c0000 {
-+ status = "okay";
-+ };
-+
-+ ohci@101c1000 {
-+ status = "okay";
-+ };
-+
-+ ethernet@10100000 {
-+ mtd-mac-address = <&factory 0x4>;
-+ ralink,port-map = "wllll";
-+ };
-+
-+ wmac@10180000 {
-+ ralink,mtd-eeprom = <&factory 0>;
-+ };
-+
-+ pinctrl {
-+ state_default: pinctrl0 {
-+ default {
-+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-+ ralink,function = "gpio";
-+ };
-+ };
-+ };
-+
-+ gpio-keys-polled {
-+ compatible = "gpio-keys-polled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <20>;
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio0 1 1>;
-+ linux,code = <0x198>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ power {
-+ label = "nexx:blue:power";
-+ gpios = <&gpio3 0 0>;
-+ };
-+ };
-+};
-diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
-index f048caf..a93b82c 100644
---- a/target/linux/ramips/image/Makefile
-+++ b/target/linux/ramips/image/Makefile
-@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
- Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
- Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
- Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
-+Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
- Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
-
- ifeq ($(SUBTARGET),mt7620n)
-@@ -778,6 +779,7 @@ define Image/Build/Profile/Default
- $(call Image/Build/Profile/RT-N14U,$(1))
- $(call Image/Build/Profile/WR8305RT,$(1))
- $(call Image/Build/Profile/WRTNODE,$(1))
-+ $(call Image/Build/Profile/WT3020,$(1))
- $(call Image/Build/Profile/ZBT-WA05,$(1))
- endef
- endif
---
-2.1.1
-
generated by cgit v1.1 at 2024-12-26 17:22:05 +0000